Sat Aug 22 06:12:14 UTC 2020 I: starting to build libmodule-install-readmefrompod-perl/buster/armhf on jenkins on '2020-08-22 06:11' Sat Aug 22 06:12:14 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_23/995/console.log Sat Aug 22 06:12:14 UTC 2020 I: Downloading source for buster/libmodule-install-readmefrompod-perl=0.30-3 --2020-08-22 06:12:15-- http://deb.debian.org/debian/pool/main/libm/libmodule-install-readmefrompod-perl/libmodule-install-readmefrompod-perl_0.30-3.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2650 (2.6K) Saving to: ‘libmodule-install-readmefrompod-perl_0.30-3.dsc’ 0K .. 100% 223M=0s 2020-08-22 06:12:15 (223 MB/s) - ‘libmodule-install-readmefrompod-perl_0.30-3.dsc’ saved [2650/2650] Sat Aug 22 06:12:15 UTC 2020 I: libmodule-install-readmefrompod-perl_0.30-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libmodule-install-readmefrompod-perl Binary: libmodule-install-readmefrompod-perl Architecture: all Version: 0.30-3 Maintainer: Debian Perl Group Uploaders: Jonas Smedegaard , Homepage: https://metacpan.org/release/Module-Install-ReadmeFromPod Standards-Version: 4.3.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libmodule-install-readmefrompod-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libmodule-install-readmefrompod-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper, libcapture-tiny-perl , libio-all-perl , libmodule-install-perl, libpod-markdown-perl , libtest-indistdir-perl , libtest-pod-coverage-perl , libtest-pod-perl , perl, pod2pdf Package-List: libmodule-install-readmefrompod-perl deb perl optional arch=all Checksums-Sha1: 6a575689a8585546c54c8d9b51345c48060ed4ab 36611 libmodule-install-readmefrompod-perl_0.30.orig.tar.gz 49e576dd9eaf301cbfb8ff11d0d4f7b75327156f 4808 libmodule-install-readmefrompod-perl_0.30-3.debian.tar.xz Checksums-Sha256: 79f6df5536619faffbda696bdd25ccad17c469bf32e51cd3e613366d49400169 36611 libmodule-install-readmefrompod-perl_0.30.orig.tar.gz 574117e254bb3b9bbd81175a046ae46300e60a9d8308ab6a2d51788344819d99 4808 libmodule-install-readmefrompod-perl_0.30-3.debian.tar.xz Files: b954ca448698a671a176245e60da74df 36611 libmodule-install-readmefrompod-perl_0.30.orig.tar.gz 90e8fc08c30705d77bad3130d9775b68 4808 libmodule-install-readmefrompod-perl_0.30-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAlxoW/9fFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgb/Uw//U+T13aR4+s8CFQMfFBd8a293REhyZ9q+C+Xp7tvRPbkqss8oVHMepJKj Y+Ohd2AZVe/0ulTF9kGsIzNoNYdiyGqVhb8ufyTpAAeqqs9k6KwP5tpI1MIScuUg a/Pq9pt6U4YS13YzUZhePuZrmfA7+gUyV1bl1+KENDj/uahYLGt/6KNHpqoSq4b4 oA6vSZb/gtc7FzWq2Lp5+zRC4pRJ782SrmcSiONKHQXYq5OV3FszF0ddNdoa6Vw+ dUVXBkXz5nzNrKpB87YLpsHuHJwipPGiGrDu6XfqpZ8O1EEnv4U0G+Ic4TpCU0q6 bFwqws9KkFHGAsccA4gZ0nKUApjZ6Qr669dEi3o6ZYpT/4zK9POz6UDs+Yn6ci5b uPyzsbXBNca8CRjtxOMxaxh7QXJG3On/0inSBWwpe36MuShY6+AbryntbuRpsMQb C76AFEuWhQPkoHR7Rs1u6gN+TYQIgapwN1OeE9aFLHhLUYECjTCriOz/yhnwFruu eyfPux8ntY/vEYNcmEzAlayBPCpFnHS1V97KikNFYokOYYTQIxK+EPapZtWkiI8a tqVDsPhDQum/+TLsiLSw9LiKqUDYjy9XMybNongPOg2ocelWdNv2+AfQmlNe/v3P 2ewLaIAXojqvDf62YZE4q27XiwEZCrHb98x0IV0vxmQYRs6UKUk= =iE3P -----END PGP SIGNATURE----- Sat Aug 22 06:12:15 UTC 2020 I: Checking whether the package is not for us Sat Aug 22 06:12:15 UTC 2020 I: Starting 1st build on remote node ff64a-armhf-rb.debian.net. Sat Aug 22 06:12:15 UTC 2020 I: Preparing to do remote build '1' on ff64a-armhf-rb.debian.net. Sat Aug 22 06:14:14 UTC 2020 I: Deleting $TMPDIR on ff64a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Aug 21 18:12:25 -12 2020 I: pbuilder-time-stamp: 1598076745 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libmodule-install-readmefrompod-perl_0.30-3.dsc] I: copying [./libmodule-install-readmefrompod-perl_0.30.orig.tar.gz] I: copying [./libmodule-install-readmefrompod-perl_0.30-3.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Feb 16 06:52:47 2019 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libmodule-install-readmefrompod-perl_0.30-3.dsc dpkg-source: info: extracting libmodule-install-readmefrompod-perl in libmodule-install-readmefrompod-perl-0.30 dpkg-source: info: unpacking libmodule-install-readmefrompod-perl_0.30.orig.tar.gz dpkg-source: info: unpacking libmodule-install-readmefrompod-perl_0.30-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 1001_fix_skip_test_pdf_for_newline.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/13624/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=5' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='f5dfd96cf5734178b8974568883294d0' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='13624' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.p6cJQucyNH/pbuilderrc_B038 --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.p6cJQucyNH/b1 --logfile b1/build.log libmodule-install-readmefrompod-perl_0.30-3.dsc' SUDO_GID='114' SUDO_UID='109' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux ff64a 4.19.0-10-arm64 #1 SMP Debian 4.19.132-1 (2020-07-24) aarch64 GNU/Linux I: ls -l /bin total 3328 -rwxr-xr-x 1 root root 767656 Apr 17 2019 bash -rwxr-xr-x 3 root root 26052 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 9636 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 22432 Feb 28 2019 cat -rwxr-xr-x 1 root root 38868 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 38836 Feb 28 2019 chmod -rwxr-xr-x 1 root root 42972 Feb 28 2019 chown -rwxr-xr-x 1 root root 88376 Feb 28 2019 cp -rwxr-xr-x 1 root root 75516 Jan 17 2019 dash -rwxr-xr-x 1 root root 71648 Feb 28 2019 date -rwxr-xr-x 1 root root 51212 Feb 28 2019 dd -rwxr-xr-x 1 root root 55672 Feb 28 2019 df -rwxr-xr-x 1 root root 88444 Feb 28 2019 dir -rwxr-xr-x 1 root root 54872 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 22364 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 18260 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 47356 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 21980 Apr 22 07:38 fusermount -rwxr-xr-x 1 root root 124508 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 64232 Jan 5 2019 gzip -rwxr-xr-x 1 root root 13784 Sep 26 2018 hostname -rwxr-xr-x 1 root root 43044 Feb 28 2019 ln -rwxr-xr-x 1 root root 34932 Jul 26 2018 login -rwxr-xr-x 1 root root 88444 Feb 28 2019 ls -rwxr-xr-x 1 root root 67036 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 47168 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 43040 Feb 28 2019 mknod -rwxr-xr-x 1 root root 26552 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 26024 Jan 9 2019 more -rwsr-xr-x 1 root root 34268 Jan 9 2019 mount -rwxr-xr-x 1 root root 9688 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 84284 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 22416 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 26504 Feb 28 2019 readlink -rwxr-xr-x 1 root root 42968 Feb 28 2019 rm -rwxr-xr-x 1 root root 26496 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 14136 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 18 20:25 sh -> dash -rwxr-xr-x 1 root root 22384 Feb 28 2019 sleep -rwxr-xr-x 1 root root 51124 Feb 28 2019 stty -rwsr-xr-x 1 root root 42472 Jan 9 2019 su -rwxr-xr-x 1 root root 22392 Feb 28 2019 sync -rwxr-xr-x 1 root root 283324 Apr 23 2019 tar -rwxr-xr-x 1 root root 9808 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 63464 Feb 28 2019 touch -rwxr-xr-x 1 root root 18260 Feb 28 2019 true -rwxr-xr-x 1 root root 9636 Apr 22 07:38 ulockmgr_server -rwsr-xr-x 1 root root 21976 Jan 9 2019 umount -rwxr-xr-x 1 root root 22380 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 88444 Feb 28 2019 vdir -rwxr-xr-x 1 root root 21980 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/13624/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper, libcapture-tiny-perl, libio-all-perl, libmodule-install-perl, libpod-markdown-perl, libtest-indistdir-perl, libtest-pod-coverage-perl, libtest-pod-perl, perl, pod2pdf dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper; however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libcapture-tiny-perl; however: Package libcapture-tiny-perl is not installed. pbuilder-satisfydepends-dummy depends on libio-all-perl; however: Package libio-all-perl is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-perl; however: Package libmodule-install-perl is not installed. pbuilder-satisfydepends-dummy depends on libpod-markdown-perl; however: Package libpod-markdown-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-indistdir-perl; however: Package libtest-indistdir-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on pod2pdf; however: Package pod2pdf is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcapture-tiny-perl{a} libcroco3{a} libdevel-symdump-perl{a} libelf1{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libfont-ttf-perl{a} libgetopt-argvfile-perl{a} libglib2.0-0{a} libicu63{a} libio-all-perl{a} libio-string-perl{a} libmagic-mgc{a} libmagic1{a} libmodule-install-perl{a} libmodule-scandeps-perl{a} libncurses6{a} libpdf-api2-perl{a} libpipeline1{a} libpod-coverage-perl{a} libpod-markdown-perl{a} libsigsegv2{a} libspiffy-perl{a} libtest-indistdir-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-tiny-perl{a} m4{a} man-db{a} po-debconf{a} pod2pdf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfile-homedir-perl libfile-type-perl libglib2.0-data libgpm2 libhtml-parser-perl libimage-size-perl libjson-perl libltdl-dev libmail-sendmail-perl libpar-dist-perl libwww-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 51 newly installed, 0 to remove and 0 not upgraded. Need to get 20.4 MB of archives. After unpacking 85.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libcapture-tiny-perl all 0.48-1 [26.0 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libdevel-symdump-perl all 2.18-3 [17.3 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libfile-remove-perl all 1.58-1 [19.1 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libio-string-perl all 1.08-3 [12.3 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libfont-ttf-perl all 1.06-1 [317 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libgetopt-argvfile-perl all 1.11-3 [28.9 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libspiffy-perl all 0.46-1 [25.7 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libio-all-perl all 0.87-1 [66.7 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libmodule-scandeps-perl all 1.27-1 [44.0 kB] Get: 43 http://deb.debian.org/debian buster/main armhf libyaml-tiny-perl all 1.73-1 [32.3 kB] Get: 44 http://deb.debian.org/debian buster/main armhf libmodule-install-perl all 1.19-1 [152 kB] Get: 45 http://deb.debian.org/debian buster/main armhf libpdf-api2-perl all 2.033-1 [1370 kB] Get: 46 http://deb.debian.org/debian buster/main armhf libpod-coverage-perl all 0.23-1 [23.9 kB] Get: 47 http://deb.debian.org/debian buster/main armhf libpod-markdown-perl all 3.101000-1 [33.5 kB] Get: 48 http://deb.debian.org/debian buster/main armhf libtest-indistdir-perl all 1.112071-1 [6704 B] Get: 49 http://deb.debian.org/debian buster/main armhf libtest-pod-coverage-perl all 1.10-2 [14.5 kB] Get: 50 http://deb.debian.org/debian buster/main armhf libtest-pod-perl all 1.52-1 [14.2 kB] Get: 51 http://deb.debian.org/debian buster/main armhf pod2pdf all 0.42-5 [17.8 kB] Fetched 20.4 MB in 5s (4381 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../33-libcapture-tiny-perl_0.48-1_all.deb ... Unpacking libcapture-tiny-perl (0.48-1) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../34-libdevel-symdump-perl_2.18-3_all.deb ... Unpacking libdevel-symdump-perl (2.18-3) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../35-libfile-remove-perl_1.58-1_all.deb ... Unpacking libfile-remove-perl (1.58-1) ... Selecting previously unselected package libio-string-perl. Preparing to unpack .../36-libio-string-perl_1.08-3_all.deb ... Unpacking libio-string-perl (1.08-3) ... Selecting previously unselected package libfont-ttf-perl. Preparing to unpack .../37-libfont-ttf-perl_1.06-1_all.deb ... Unpacking libfont-ttf-perl (1.06-1) ... Selecting previously unselected package libgetopt-argvfile-perl. Preparing to unpack .../38-libgetopt-argvfile-perl_1.11-3_all.deb ... Unpacking libgetopt-argvfile-perl (1.11-3) ... Selecting previously unselected package libspiffy-perl. Preparing to unpack .../39-libspiffy-perl_0.46-1_all.deb ... Unpacking libspiffy-perl (0.46-1) ... Selecting previously unselected package libio-all-perl. Preparing to unpack .../40-libio-all-perl_0.87-1_all.deb ... Unpacking libio-all-perl (0.87-1) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../41-libmodule-scandeps-perl_1.27-1_all.deb ... Unpacking libmodule-scandeps-perl (1.27-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../42-libyaml-tiny-perl_1.73-1_all.deb ... Unpacking libyaml-tiny-perl (1.73-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../43-libmodule-install-perl_1.19-1_all.deb ... Unpacking libmodule-install-perl (1.19-1) ... Selecting previously unselected package libpdf-api2-perl. Preparing to unpack .../44-libpdf-api2-perl_2.033-1_all.deb ... Unpacking libpdf-api2-perl (2.033-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../45-libpod-coverage-perl_0.23-1_all.deb ... Unpacking libpod-coverage-perl (0.23-1) ... Selecting previously unselected package libpod-markdown-perl. Preparing to unpack .../46-libpod-markdown-perl_3.101000-1_all.deb ... Unpacking libpod-markdown-perl (3.101000-1) ... Selecting previously unselected package libtest-indistdir-perl. Preparing to unpack .../47-libtest-indistdir-perl_1.112071-1_all.deb ... Unpacking libtest-indistdir-perl (1.112071-1) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../48-libtest-pod-coverage-perl_1.10-2_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-2) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../49-libtest-pod-perl_1.52-1_all.deb ... Unpacking libtest-pod-perl (1.52-1) ... Selecting previously unselected package pod2pdf. Preparing to unpack .../50-pod2pdf_0.42-5_all.deb ... Unpacking pod2pdf (0.42-5) ... Setting up libfile-remove-perl (1.58-1) ... Setting up libpod-markdown-perl (3.101000-1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libtest-pod-perl (1.52-1) ... Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up libtest-indistdir-perl (1.112071-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libyaml-tiny-perl (1.73-1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up libio-string-perl (1.08-3) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libgetopt-argvfile-perl (1.11-3) ... Setting up autopoint (0.19.8.1-9) ... Setting up libspiffy-perl (0.46-1) ... Setting up libcapture-tiny-perl (0.48-1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libdevel-symdump-perl (2.18-3) ... Setting up libfont-ttf-perl (1.06-1) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libmodule-scandeps-perl (1.27-1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up libpod-coverage-perl (0.23-1) ... Setting up m4 (1.4.18-2) ... Setting up libio-all-perl (0.87-1) ... Setting up libpdf-api2-perl (2.033-1) ... Setting up libmodule-install-perl (1.19-1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libtest-pod-coverage-perl (1.10-2) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up pod2pdf (0.42-5) ... Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libmodule-install-readmefrompod-perl-0.30/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libmodule-install-readmefrompod-perl dpkg-buildpackage: info: source version 0.30-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libmodule-install-readmefrompod-perl-0.30=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libmodule-install-readmefrompod-perl-0.30=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" I can run 'make' good Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Module::Install::ReadmeFromPod Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libmodule-install-readmefrompod-perl-0.30' cp lib/Module/Install/ReadmeFromPod.pm blib/lib/Module/Install/ReadmeFromPod.pm Manifying 1 pod document make[1]: Leaving directory '/build/libmodule-install-readmefrompod-perl-0.30' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libmodule-install-readmefrompod-perl-0.30' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t # Testing Module::Install::ReadmeFromPod 0.30, Perl 5.028001, /usr/bin/perl t/00_compile.t ....... 1..1 ok 1 - use Module::Install::ReadmeFromPod; ok # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # include /build/libmodule-install-readmefrompod-perl-0.30/dist/Jj7o2spHQG/inc/Module/Install.pm # include inc/Module/Install/Metadata.pm # include inc/Module/Install/Base.pm # include inc/Module/Install/ReadmeFromPod.pm # readme_from README.pm to txt # readme_from README.pm to htm # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # readme_from README.pm to man # readme_from README.pm to md # include inc/Module/Install/WriteAll.pm # include inc/Module/Install/Makefile.pm # include inc/Module/Install/Win32.pm # include inc/Module/Install/Can.pm # include inc/Module/Install/Fetch.pm # Generating a Unix-style Makefile # Writing Makefile for Foo::Bar # Writing MYMETA.yml and MYMETA.json # Writing META.yml # make[2]: Entering directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/Jj7o2spHQG' # rm -f \ # Bar.bso Bar.def \ # Bar.exp Bar.x \ # blib/arch/auto/Foo/Bar/extralibs.all \ # blib/arch/auto/Foo/Bar/extralibs.ld Makefile.aperl \ # *.a *.o \ # *perl.core MYMETA.json \ # MYMETA.yml blibdirs.ts \ # core core.*perl.*.? \ # core.[0-9] core.[0-9][0-9] \ # core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] \ # core.[0-9][0-9][0-9][0-9][0-9] libBar.def \ # mon.out perl \ # perl perl.exe \ # perlmain.c pm_to_blib \ # pm_to_blib.ts so_locations \ # tmon.out # rm -rf \ # blib # mv Makefile Makefile.old > /dev/null 2>&1 # rm -f \ # Makefile Makefile.old # rm -rf \ # Foo-Bar-0.01 MYMETA.yml # rm -f Foo-Bar-0.01.tar.gz # rm -f MANIFEST.bak _build # "/usr/bin/perl" "-Iinc" "-Ilib" "-MModule::Install::Admin" -e "remove_meta()" # rm -rf inc # "/usr/bin/perl" "-Iinc" "-MExtUtils::Manifest=fullcheck" -e fullcheck # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Not in MANIFEST: Makefile.PL # Not in MANIFEST: README # Not in MANIFEST: README.1 # Not in MANIFEST: README.htm # Not in MANIFEST: README.md # Not in MANIFEST: README.pm # make[2]: Leaving directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/Jj7o2spHQG' t/01_dist.t .......... 1..13 ok 1 - Exists: 'inc/Module/Install/ReadmeFromPod.pm' ok 2 - There is a README file ok 3 - There is a README.htm file ok 4 - There is a README.md file ok 5 - There is a README.1 file ok 6 - README contains only unix newlines ok 7 - README.htm contains only unix newlines ok 8 - README.md contains only unix newlines ok 9 - README.1 contains only unix newlines ok 10 - There is a README file ok 11 - There is a README.htm file ok 12 - There is a README.md file ok 13 - There is a README.1 file ok # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # include /build/libmodule-install-readmefrompod-perl-0.30/dist/r4anK_AI4l/inc/Module/Install.pm # include inc/Module/Install/Metadata.pm # include inc/Module/Install/Base.pm # include inc/Module/Install/ReadmeFromPod.pm # readme_from README.pm to text # include inc/Module/Install/Makefile.pm # readme_from README.pm to html # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # readme_from README.pm to md # readme_from README.pm to man # include inc/Module/Install/WriteAll.pm # include inc/Module/Install/Win32.pm # include inc/Module/Install/Can.pm # include inc/Module/Install/Fetch.pm # Generating a Unix-style Makefile # Writing Makefile for Foo::Bar # Writing MYMETA.yml and MYMETA.json # Writing META.yml # make[2]: Entering directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/r4anK_AI4l' # rm -f \ # Bar.bso Bar.def \ # Bar.exp Bar.x \ # blib/arch/auto/Foo/Bar/extralibs.all \ # blib/arch/auto/Foo/Bar/extralibs.ld Makefile.aperl \ # *.a *.o \ # *perl.core MYMETA.json \ # MYMETA.yml blibdirs.ts \ # core core.*perl.*.? \ # core.[0-9] core.[0-9][0-9] \ # core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] \ # core.[0-9][0-9][0-9][0-9][0-9] libBar.def \ # mon.out perl \ # perl perl.exe \ # perlmain.c pm_to_blib \ # pm_to_blib.ts so_locations \ # tmon.out # rm -rf \ # Foobar.htm Foobar.man \ # Foobar.md Foobar.txt \ # blib # mv Makefile Makefile.old > /dev/null 2>&1 # rm -f \ # Makefile Makefile.old # rm -rf \ # Foo-Bar-0.01 MYMETA.yml # rm -f Foo-Bar-0.01.tar.gz # rm -f MANIFEST.bak _build # "/usr/bin/perl" "-Iinc" "-Ilib" "-MModule::Install::Admin" -e "remove_meta()" # rm -rf inc # "/usr/bin/perl" "-Iinc" "-MExtUtils::Manifest=fullcheck" -e fullcheck # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Not in MANIFEST: Makefile.PL # Not in MANIFEST: README.pm # make[2]: Leaving directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/r4anK_AI4l' t/02_clean.t ......... 1..13 ok 1 - Exists: 'inc/Module/Install/ReadmeFromPod.pm' ok 2 - There is a Foobar.txt file ok 3 - There is a Foobar.htm file ok 4 - There is a Foobar.md file ok 5 - There is a Foobar.man file ok 6 - Foobar.txt contains only unix newlines ok 7 - Foobar.htm contains only unix newlines ok 8 - Foobar.md contains only unix newlines ok 9 - Foobar.man contains only unix newlines ok 10 - The Foobar.txt file has been removed ok 11 - The Foobar.htm file has been removed ok 12 - The Foobar.md file has been removed ok 13 - The Foobar.man file has been removed ok # include /build/libmodule-install-readmefrompod-perl-0.30/dist/O5MWi31nqU/inc/Module/Install.pm # include inc/Module/Install/Metadata.pm # include inc/Module/Install/Base.pm # include inc/Module/Install/Makefile.pm # include inc/Module/Install/ReadmeFromPod.pm # readme_from README.pm to txt # include inc/Module/Install/WriteAll.pm # include inc/Module/Install/Win32.pm # include inc/Module/Install/Can.pm # include inc/Module/Install/Fetch.pm # Generating a Unix-style Makefile # Writing Makefile for Foo::Bar # Writing MYMETA.yml and MYMETA.json # Writing META.yml # make[2]: Entering directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/O5MWi31nqU' # rm -f \ # Bar.bso Bar.def \ # Bar.exp Bar.x \ # blib/arch/auto/Foo/Bar/extralibs.all \ # blib/arch/auto/Foo/Bar/extralibs.ld Makefile.aperl \ # *.a *.o \ # *perl.core MYMETA.json \ # MYMETA.yml blibdirs.ts \ # core core.*perl.*.? \ # core.[0-9] core.[0-9][0-9] \ # core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] \ # core.[0-9][0-9][0-9][0-9][0-9] libBar.def \ # mon.out perl \ # perl perl.exe \ # perlmain.c pm_to_blib \ # pm_to_blib.ts so_locations \ # tmon.out # rm -rf \ # blib # mv Makefile Makefile.old > /dev/null 2>&1 # rm -f \ # Makefile Makefile.old # rm -rf \ # Foo-Bar-0.01 MYMETA.yml # rm -f Foo-Bar-0.01.tar.gz # rm -f MANIFEST.bak _build # "/usr/bin/perl" "-Iinc" "-Ilib" "-MModule::Install::Admin" -e "remove_meta()" # rm -rf inc # "/usr/bin/perl" "-Iinc" "-MExtUtils::Manifest=fullcheck" -e fullcheck # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Not in MANIFEST: Makefile.PL # Not in MANIFEST: README # Not in MANIFEST: README.pm # make[2]: Leaving directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/O5MWi31nqU' t/03_all_from.t ...... 1..4 ok 1 - Exists: 'inc/Module/Install/ReadmeFromPod.pm' ok 2 - There is a README file ok 3 - README contains only unix newlines ok 4 - There is a README file ok # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # include /build/libmodule-install-readmefrompod-perl-0.30/dist/a3bdTX25Sl/inc/Module/Install.pm # include inc/Module/Install/Metadata.pm # include inc/Module/Install/Base.pm # include inc/Module/Install/ReadmeFromPod.pm # readme_from README.pm to txt # readme_from README.pm to htm # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # readme_from README.pm to man # readme_from README.pm to pdf # include inc/Module/Install/WriteAll.pm # include inc/Module/Install/Makefile.pm # include inc/Module/Install/Win32.pm # include inc/Module/Install/Can.pm # include inc/Module/Install/Fetch.pm # Generating a Unix-style Makefile # Writing Makefile for Foo::Bar # Writing MYMETA.yml and MYMETA.json # Writing META.yml # make[2]: Entering directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/a3bdTX25Sl' # rm -f \ # Bar.bso Bar.def \ # Bar.exp Bar.x \ # blib/arch/auto/Foo/Bar/extralibs.all \ # blib/arch/auto/Foo/Bar/extralibs.ld Makefile.aperl \ # *.a *.o \ # *perl.core MYMETA.json \ # MYMETA.yml blibdirs.ts \ # core core.*perl.*.? \ # core.[0-9] core.[0-9][0-9] \ # core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] \ # core.[0-9][0-9][0-9][0-9][0-9] libBar.def \ # mon.out perl \ # perl perl.exe \ # perlmain.c pm_to_blib \ # pm_to_blib.ts so_locations \ # tmon.out # rm -rf \ # blib # mv Makefile Makefile.old > /dev/null 2>&1 # rm -f \ # Makefile Makefile.old # rm -rf \ # Foo-Bar-0.01 MYMETA.yml # rm -f Foo-Bar-0.01.tar.gz # rm -f MANIFEST.bak _build # "/usr/bin/perl" "-Iinc" "-Ilib" "-MModule::Install::Admin" -e "remove_meta()" # rm -rf inc # "/usr/bin/perl" "-Iinc" "-MExtUtils::Manifest=fullcheck" -e fullcheck # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Not in MANIFEST: Makefile.PL # Not in MANIFEST: README # Not in MANIFEST: README.1 # Not in MANIFEST: README.htm # Not in MANIFEST: README.pdf # Not in MANIFEST: README.pm # make[2]: Leaving directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/a3bdTX25Sl' t/04_distpdf.t ....... 1..13 ok 1 - Exists: 'inc/Module/Install/ReadmeFromPod.pm' ok 2 - There is a README file ok 3 - There is a README.htm file ok 4 - There is a README.1 file ok 5 - There is a README.pdf file ok 6 - README contains only unix newlines ok 7 - README.htm contains only unix newlines ok 8 - README.1 contains only unix newlines ok 9 - README.pdf contains only unix newlines ok 10 - There is a README file ok 11 - There is a README.htm file ok 12 - There is a README.1 file ok 13 - There is a README.pdf file ok # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # include /build/libmodule-install-readmefrompod-perl-0.30/dist/EjfgMy_xck/inc/Module/Install.pm # include inc/Module/Install/Metadata.pm # include inc/Module/Install/Base.pm # include inc/Module/Install/ReadmeFromPod.pm # readme_from README.pm to text # include inc/Module/Install/Makefile.pm # readme_from README.pm to html # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # Subroutine Module::Install::ReadmeFromPod::io redefined at /usr/share/perl5/IO/All/Base.pm line 24. # readme_from README.pm to man # readme_from README.pm to pdf # include inc/Module/Install/WriteAll.pm # include inc/Module/Install/Win32.pm # include inc/Module/Install/Can.pm # include inc/Module/Install/Fetch.pm # Generating a Unix-style Makefile # Writing Makefile for Foo::Bar # Writing MYMETA.yml and MYMETA.json # Writing META.yml # make[2]: Entering directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/EjfgMy_xck' # rm -f \ # Bar.bso Bar.def \ # Bar.exp Bar.x \ # blib/arch/auto/Foo/Bar/extralibs.all \ # blib/arch/auto/Foo/Bar/extralibs.ld Makefile.aperl \ # *.a *.o \ # *perl.core MYMETA.json \ # MYMETA.yml blibdirs.ts \ # core core.*perl.*.? \ # core.[0-9] core.[0-9][0-9] \ # core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] \ # core.[0-9][0-9][0-9][0-9][0-9] libBar.def \ # mon.out perl \ # perl perl.exe \ # perlmain.c pm_to_blib \ # pm_to_blib.ts so_locations \ # tmon.out # rm -rf \ # Foobar.htm Foobar.man \ # Foobar.pdf Foobar.txt \ # blib # mv Makefile Makefile.old > /dev/null 2>&1 # rm -f \ # Makefile Makefile.old # rm -rf \ # Foo-Bar-0.01 MYMETA.yml # rm -f Foo-Bar-0.01.tar.gz # rm -f MANIFEST.bak _build # "/usr/bin/perl" "-Iinc" "-Ilib" "-MModule::Install::Admin" -e "remove_meta()" # rm -rf inc # "/usr/bin/perl" "-Iinc" "-MExtUtils::Manifest=fullcheck" -e fullcheck # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Problem opening MANIFEST: No such file or directory at /usr/share/perl/5.28/ExtUtils/Manifest.pm line 349. # Not in MANIFEST: Makefile.PL # Not in MANIFEST: README.pm # make[2]: Leaving directory '/build/libmodule-install-readmefrompod-perl-0.30/dist/EjfgMy_xck' t/05_cleanpdf.t ...... 1..12 ok 1 - Exists: 'inc/Module/Install/ReadmeFromPod.pm' ok 2 - There is a Foobar.txt file ok 3 - There is a Foobar.htm file ok 4 - There is a Foobar.man file ok 5 - There is a Foobar.pdf file ok 6 - Foobar.txt contains only unix newlines ok 7 - Foobar.htm contains only unix newlines ok 8 - Foobar.man contains only unix newlines ok 9 - The Foobar.txt file has been removed ok 10 - The Foobar.htm file has been removed ok 11 - The Foobar.man file has been removed ok 12 - There is a Foobar.pdf file ok t/99_pod.t ........... 1..1 ok 1 - POD test for blib/lib/Module/Install/ReadmeFromPod.pm ok t/99_pod_coverage.t .. 1..1 ok 1 - Pod coverage on Module::Install::ReadmeFromPod ok All tests successful. Files=8, Tests=58, 17 wallclock secs ( 0.14 usr 0.04 sys + 15.20 cusr 1.36 csys = 16.74 CPU) Result: PASS make[1]: Leaving directory '/build/libmodule-install-readmefrompod-perl-0.30' dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/libmodule-install-readmefrompod-perl-0.30/debian/libmodule-install-readmefrompod-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libmodule-install-readmefrompod-perl-0.30' Manifying 1 pod document Installing /build/libmodule-install-readmefrompod-perl-0.30/debian/libmodule-install-readmefrompod-perl/usr/share/perl5/Module/Install/ReadmeFromPod.pm Installing /build/libmodule-install-readmefrompod-perl-0.30/debian/libmodule-install-readmefrompod-perl/usr/share/man/man3/Module::Install::ReadmeFromPod.3pm make[1]: Leaving directory '/build/libmodule-install-readmefrompod-perl-0.30' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libmodule-install-readmefrompod-perl' in '../libmodule-install-readmefrompod-perl_0.30-3_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libmodule-install-readmefrompod-perl_0.30-3_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/13624 and its subdirectories I: Current time: Fri Aug 21 18:14:09 -12 2020 I: pbuilder-time-stamp: 1598076849 Sat Aug 22 06:14:17 UTC 2020 I: 1st build successful. Starting 2nd build on remote node opi2a-armhf-rb.debian.net. Sat Aug 22 06:14:17 UTC 2020 I: Preparing to do remote build '2' on opi2a-armhf-rb.debian.net. Sat Aug 22 06:22:49 UTC 2020 I: Deleting $TMPDIR on opi2a-armhf-rb.debian.net. Sat Aug 22 06:22:52 UTC 2020 I: libmodule-install-readmefrompod-perl_0.30-3_armhf.changes: Format: 1.8 Date: Sat, 16 Feb 2019 19:48:39 +0100 Source: libmodule-install-readmefrompod-perl Binary: libmodule-install-readmefrompod-perl Architecture: all Version: 0.30-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libmodule-install-readmefrompod-perl - automatically convert POD to a README Closes: 921804 Changes: libmodule-install-readmefrompod-perl (0.30-3) unstable; urgency=medium . * Team upload. * Add libcapture-tiny-perlto Depends. (Closes: #921804) Checksums-Sha1: c7587fdf347cc58470b697e0f874658bafa1da06 12840 libmodule-install-readmefrompod-perl_0.30-3_all.deb a67995881dcc5d993275ea9f698076a3c18abe61 4991 libmodule-install-readmefrompod-perl_0.30-3_armhf.buildinfo Checksums-Sha256: cced8aad485d92442de301326dd8d2da04a2a1583e330db87cdadaf795d5ff1b 12840 libmodule-install-readmefrompod-perl_0.30-3_all.deb 58be88ae9f105ec16116f170e83a4ed1f6b0ae992b052db1d4fc54a7f0dc1744 4991 libmodule-install-readmefrompod-perl_0.30-3_armhf.buildinfo Files: ff196ea02730522973b12b72387ceb3f 12840 perl optional libmodule-install-readmefrompod-perl_0.30-3_all.deb 3c5c9ba2a746c2439f9a6dbb0868a2f4 4991 perl optional libmodule-install-readmefrompod-perl_0.30-3_armhf.buildinfo Sat Aug 22 06:23:04 UTC 2020 I: diffoscope 157 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.p6cJQucyNH/libmodule-install-readmefrompod-perl_0.30-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.p6cJQucyNH/libmodule-install-readmefrompod-perl_0.30-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.p6cJQucyNH/libmodule-install-readmefrompod-perl_0.30-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.p6cJQucyNH/b1/libmodule-install-readmefrompod-perl_0.30-3_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.p6cJQucyNH/b2/libmodule-install-readmefrompod-perl_0.30-3_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.239s) 0.239s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.021s) 0.020s 10 calls diffoscope.comparators.binary.FilesystemFile 0.001s 8 calls abc.DotChangesFile Sat Aug 22 06:23:27 UTC 2020 I: diffoscope 157 found no differences in the changes files, and a .buildinfo file also exists. Sat Aug 22 06:23:27 UTC 2020 I: libmodule-install-readmefrompod-perl from buster built successfully and reproducibly on armhf. Sat Aug 22 06:23:28 UTC 2020 I: Submitting .buildinfo files to external archives: Sat Aug 22 06:23:28 UTC 2020 I: Submitting 8.0K b1/libmodule-install-readmefrompod-perl_0.30-3_armhf.buildinfo.asc Sat Aug 22 06:23:30 UTC 2020 I: Submitting 8.0K b2/libmodule-install-readmefrompod-perl_0.30-3_armhf.buildinfo.asc Sat Aug 22 06:23:31 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Aug 22 06:23:31 UTC 2020 I: Done submitting .buildinfo files. Sat Aug 22 06:23:31 UTC 2020 I: Removing signed libmodule-install-readmefrompod-perl_0.30-3_armhf.buildinfo.asc files: removed './b1/libmodule-install-readmefrompod-perl_0.30-3_armhf.buildinfo.asc' removed './b2/libmodule-install-readmefrompod-perl_0.30-3_armhf.buildinfo.asc'