Fri May 15 23:34:07 UTC 2020 I: starting to build libextutils-config-perl/buster/armhf on jenkins on '2020-05-15 23:33' Fri May 15 23:34:07 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_44/1473/console.log Fri May 15 23:34:07 UTC 2020 I: Downloading source for buster/libextutils-config-perl=0.008-2 --2020-05-15 23:34:07-- http://deb.debian.org/debian/pool/main/libe/libextutils-config-perl/libextutils-config-perl_0.008-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2162 (2.1K) Saving to: ‘libextutils-config-perl_0.008-2.dsc’ 0K .. 100% 145M=0s 2020-05-15 23:34:07 (145 MB/s) - ‘libextutils-config-perl_0.008-2.dsc’ saved [2162/2162] Fri May 15 23:34:07 UTC 2020 I: libextutils-config-perl_0.008-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libextutils-config-perl Binary: libextutils-config-perl Architecture: all Version: 0.008-2 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/ExtUtils-Config Standards-Version: 4.1.3 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-perl/packages/libextutils-config-perl.git Vcs-Git: https://anonscm.debian.org/git/pkg-perl/packages/libextutils-config-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 10) Build-Depends-Indep: perl Package-List: libextutils-config-perl deb perl optional arch=all Checksums-Sha1: 971584d0fbc7a1e072465be2b8a34fc608269ef0 11165 libextutils-config-perl_0.008.orig.tar.gz 5e2968730d04acf67703b94d43c861ec12fae369 1820 libextutils-config-perl_0.008-2.debian.tar.xz Checksums-Sha256: ae5104f634650dce8a79b7ed13fb59d67a39c213a6776cfdaa3ee749e62f1a8c 11165 libextutils-config-perl_0.008.orig.tar.gz ce4aeaa18ede9983dcb7afc3e3e4a99858a2e709084d8ac3cb44279977b8dc38 1820 libextutils-config-perl_0.008-2.debian.tar.xz Files: 565a7b09c7cac5907a25bbe2c959a717 11165 libextutils-config-perl_0.008.orig.tar.gz 04c8d13db14e02a8ccbdf2be3e00fbe1 1820 libextutils-config-perl_0.008-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEdqKOQsmBHZHoj7peLsD/s7cwGx8FAlqIWjUACgkQLsD/s7cw Gx9OhA/+JxvO9KEaqKLge45RIOJXCwoWNwUsu3WdPldxJaSIfOcLSHUjz7/IqyQU il22Ljtoo++wXL5332ubJF3xAmaNe2FW5gm+G+s6iLumDd/CVPNxgD3goLMHoMrF 6KkPJ1Cm3+wX5+Tjkrw218RXv2HMmDCgJMktamJKLM+RZpXh76SSZHMjnfStlJvz 7/7c+QTfscJjCj+G32QjVWHxwlRfC1MWYQAJj3a6ZBEKx967/lKoZPJ1wXJ4T4pi +CDEKIrFBGSWKUR51q4eHXQSI9m6+S6Qfp7voZPoZsUvI1+HeSXgN83k+9GrPFrX vYW35n6lZxmiyedVRp2MKcWzYaZsPAQFxM8nBqBSPoswsHSW95qOxrSWWtmnEmV0 aV+mX9bbciZ/DacQqv3hfkF+zQ86eSnIeELqJICcLZNAQYh0JyAC2cqe5mUjExVq kvfkO0dUbuTtpKI0UoI/0ebiW4uyAiJRZst1vxO5YfhE/+ZPKVfsh2PwYbbJQqwn rrysGJDrXpPrw7H3R6YqOtjtT1Unp96wMx/kFHQs7+Y6DvPNqcmzO/yCC8T1AEog /dt+nfWRWbJaoRxYUYMPC0aU78Vi2wnplg3mUtnoEJY3X53Q89SMXwvTAkqtVxTU +QYOaIJ3XQpNijLIOnFNm/jl9SGevLid1y5vMLuI0Oct/8NsQ+o= =9Ys8 -----END PGP SIGNATURE----- Fri May 15 23:34:07 UTC 2020 I: Checking whether the package is not for us Fri May 15 23:34:07 UTC 2020 I: Starting 1st build on remote node cbxi4b-armhf-rb.debian.net. Fri May 15 23:34:07 UTC 2020 I: Preparing to do remote build '1' on cbxi4b-armhf-rb.debian.net. Fri May 15 23:37:31 UTC 2020 I: Deleting $TMPDIR on cbxi4b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri May 15 11:34:16 -12 2020 I: pbuilder-time-stamp: 1589585656 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libextutils-config-perl_0.008-2.dsc] I: copying [./libextutils-config-perl_0.008.orig.tar.gz] I: copying [./libextutils-config-perl_0.008-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Feb 17 04:37:09 2018 -12 gpgv: using RSA key 76A28E42C9811D91E88FBA5E2EC0FFB3B7301B1F gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libextutils-config-perl_0.008-2.dsc dpkg-source: info: extracting libextutils-config-perl in libextutils-config-perl-0.008 dpkg-source: info: unpacking libextutils-config-perl_0.008.orig.tar.gz dpkg-source: info: unpacking libextutils-config-perl_0.008-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10); however: Package debhelper is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 18.2 MB of archives. After unpacking 63.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Fetched 18.2 MB in 3s (7264 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libextutils-config-perl-0.008/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libextutils-config-perl dpkg-buildpackage: info: source version 0.008-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Niko Tyni dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libextutils-config-perl-0.008=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libextutils-config-perl-0.008=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for ExtUtils::Config Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/libextutils-config-perl-0.008' cp lib/ExtUtils/Config.pm blib/lib/ExtUtils/Config.pm Manifying 1 pod document make[1]: Leaving directory '/build/libextutils-config-perl-0.008' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libextutils-config-perl-0.008' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - ExtUtils/Config.pm loaded ok ok t/basics.t ................ ok 1 - 'path_sep' is set ok 2 - 'path_sep' is the same for $Config ok 3 - 'nonexistent' is still nonexistent ok 4 - 'nonexistent' is not defined ok 5 - all_config is \%Config ok 6 - values_set is { more => 'nomore'} ok 7 - allconfig is myconfig ok 8 - more is still 'more' 1..8 ok t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing All tests successful. Files=4, Tests=9, 6 wallclock secs ( 0.21 usr 0.04 sys + 3.16 cusr 0.33 csys = 3.74 CPU) Result: PASS make[1]: Leaving directory '/build/libextutils-config-perl-0.008' create-stamp debian/debhelper-build-stamp dh_testroot dh_prep dh_auto_install make -j3 install DESTDIR=/build/libextutils-config-perl-0.008/debian/libextutils-config-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libextutils-config-perl-0.008' Manifying 1 pod document Installing /build/libextutils-config-perl-0.008/debian/libextutils-config-perl/usr/share/perl5/ExtUtils/Config.pm Installing /build/libextutils-config-perl-0.008/debian/libextutils-config-perl/usr/share/man/man3/ExtUtils::Config.3pm make[1]: Leaving directory '/build/libextutils-config-perl-0.008' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libextutils-config-perl' in '../libextutils-config-perl_0.008-2_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libextutils-config-perl_0.008-2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/29670 and its subdirectories I: Current time: Fri May 15 11:37:26 -12 2020 I: pbuilder-time-stamp: 1589585846 Fri May 15 23:37:33 UTC 2020 I: 1st build successful. Starting 2nd build on remote node ff64a-armhf-rb.debian.net. Fri May 15 23:37:33 UTC 2020 I: Preparing to do remote build '2' on ff64a-armhf-rb.debian.net. Fri May 15 23:38:46 UTC 2020 I: Deleting $TMPDIR on ff64a-armhf-rb.debian.net. Fri May 15 23:38:48 UTC 2020 I: libextutils-config-perl_0.008-2_armhf.changes: Format: 1.8 Date: Sat, 17 Feb 2018 18:35:28 +0200 Source: libextutils-config-perl Binary: libextutils-config-perl Architecture: all Version: 0.008-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Niko Tyni Description: libextutils-config-perl - wrapper around Perl's configuration hash Changes: libextutils-config-perl (0.008-2) unstable; urgency=medium . * Team upload. . [ Salvatore Bonaccorso ] * Update Vcs-Browser URL to cgit web frontend * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. . [ Niko Tyni ] * Update to debhelper compat level 10 * Update to Standards-Version 4.1.3 * Declare that the package does not need (fake)root to build * Add Testsuite declaration for autopkgtest-pkg-perl Checksums-Sha1: 3fe2371d9c4a3f2438e49ed7b46d002d6b0323cb 5688 libextutils-config-perl_0.008-2_all.deb e420b4c4019ae083dc2a26bfd2cbca3a88530020 4289 libextutils-config-perl_0.008-2_armhf.buildinfo Checksums-Sha256: 4f7eab06c844c960551e15353a9bd42609f9cb5f0b17681b5e10792eef1d5a93 5688 libextutils-config-perl_0.008-2_all.deb 4ec2557c6d55ee16a3d4593c2f8923a4db4d72b87919879c7a1c25bb0fd627f5 4289 libextutils-config-perl_0.008-2_armhf.buildinfo Files: d361eb8f8682320c1a8117e336f8768d 5688 perl optional libextutils-config-perl_0.008-2_all.deb e3efd3d70bfe1a3b390f22cdfb2f9787 4289 perl optional libextutils-config-perl_0.008-2_armhf.buildinfo Fri May 15 23:38:50 UTC 2020 I: diffoscope 143 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.WPEksdij0r/libextutils-config-perl_0.008-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.WPEksdij0r/libextutils-config-perl_0.008-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.WPEksdij0r/libextutils-config-perl_0.008-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.WPEksdij0r/b1/libextutils-config-perl_0.008-2_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.WPEksdij0r/b2/libextutils-config-perl_0.008-2_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.486s) 0.486s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.040s) 0.040s 10 calls diffoscope.comparators.binary.FilesystemFile Fri May 15 23:38:53 UTC 2020 I: diffoscope 143 found no differences in the changes files, and a .buildinfo file also exists. Fri May 15 23:38:53 UTC 2020 I: libextutils-config-perl from buster built successfully and reproducibly on armhf. Fri May 15 23:38:54 UTC 2020 I: Submitting .buildinfo files to external archives: Fri May 15 23:38:54 UTC 2020 I: Submitting 8.0K b1/libextutils-config-perl_0.008-2_armhf.buildinfo.asc Fri May 15 23:38:55 UTC 2020 I: Submitting 8.0K b2/libextutils-config-perl_0.008-2_armhf.buildinfo.asc Fri May 15 23:38:56 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 15 23:38:56 UTC 2020 I: Done submitting .buildinfo files. Fri May 15 23:38:56 UTC 2020 I: Removing signed libextutils-config-perl_0.008-2_armhf.buildinfo.asc files: removed './b1/libextutils-config-perl_0.008-2_armhf.buildinfo.asc' removed './b2/libextutils-config-perl_0.008-2_armhf.buildinfo.asc'