Fri May 15 23:11:01 UTC 2020 I: starting to build libcgi-fast-perl/buster/armhf on jenkins on '2020-05-15 23:10' Fri May 15 23:11:01 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_52/2143/console.log Fri May 15 23:11:01 UTC 2020 I: Downloading source for buster/libcgi-fast-perl=1:2.13-1 --2020-05-15 23:11:01-- http://deb.debian.org/debian/pool/main/libc/libcgi-fast-perl/libcgi-fast-perl_2.13-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2125 (2.1K) Saving to: ‘libcgi-fast-perl_2.13-1.dsc’ 0K .. 100% 121M=0s 2020-05-15 23:11:01 (121 MB/s) - ‘libcgi-fast-perl_2.13-1.dsc’ saved [2125/2125] Fri May 15 23:11:01 UTC 2020 I: libcgi-fast-perl_2.13-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libcgi-fast-perl Binary: libcgi-fast-perl Architecture: all Version: 1:2.13-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/CGI-Fast Standards-Version: 4.1.1 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-perl/packages/libcgi-fast-perl.git Vcs-Git: https://anonscm.debian.org/git/pkg-perl/packages/libcgi-fast-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 9) Build-Depends-Indep: libcgi-pm-perl (>= 4), libfcgi-perl, libtest-deep-perl, perl Package-List: libcgi-fast-perl deb perl optional arch=all Checksums-Sha1: c7346b5b70a9d4110ea74ca6dc92f599aa8ef179 8844 libcgi-fast-perl_2.13.orig.tar.gz 4b601c9ba96804d2bc93b0c3b4316a4794f86526 2768 libcgi-fast-perl_2.13-1.debian.tar.xz Checksums-Sha256: 792f21fc3b94380e37c99faa7901ecedf01d6855191000d1ffb2a7003813b1d4 8844 libcgi-fast-perl_2.13.orig.tar.gz 1049534cc8bb3012754b7886b415fa43f203fff19fb61a9e99b286018bb78639 2768 libcgi-fast-perl_2.13-1.debian.tar.xz Files: 1085839daf37d49a538caded0b561b4d 8844 libcgi-fast-perl_2.13.orig.tar.gz d30c9dc8e852a56f1e1038ca38826eea 2768 libcgi-fast-perl_2.13-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEErqDETssFbpNjDZ0z276dTZnSoAQFAloQlj4ACgkQ276dTZnS oASKGw/+JGjNx0fcVNElUcceIohANH7BNflGkIXcUEMhC60ZjG1R1DfP7YsdomEE s9IwLwFqBtODDM9ttAeaPxXiqI/23vhw5G0HTSvcN48leATeKdZlq/4RznGsveCA imqhk9Zb7FBe/TTfbawRxWHyjJ2AHIEJFH+l3tyXd3JopI85cObDqL+JNbseTk0d X9urA98D1kWITvB4reAt71I5+V5Sl1a6utAa3F/FZEOTKQod3Jh1ka6JbRBtnu8S OGwSOpNYz9nRv7UGDxgXOMhglB6lyZpGhemc5UY1CjwyK4mZo65eUpSs/tvfS7qs +WGPud7bXzT7VumHfeN/8GYgUzBHVi3CznBVvcm+WetJ9egPmmq+2FivD/9H5z+B A5+ex6BE1TXzSCXG9j9w0NZ5DJYviOvP+Slj531AvgbxlqljXynAt96o6EuI085e 9gkp3yWRS8Y7PCiHXAYq/nCbsH/OgIGv1Jd8CToNeEkT1Se9DJT2vOy+OQ3nR2cQ J2n0CxQH+V1ByXi5n0mEOvv50t0DqCb1RqBWiA2HHaUcu+z/UHHJ9zaY9F1diYxP +gCcVV7Nx4dlYeFtWyTmPtfONHer2XzDq4O1HM2DwUYis8xA9cKTtECZanUW+PwU Zlcx3E/vfiHbBhoMzBY6h+EbVfHh4UXt/tz8XIih1SslzrD4ZaU= =ntk2 -----END PGP SIGNATURE----- Fri May 15 23:11:01 UTC 2020 I: Checking whether the package is not for us Fri May 15 23:11:01 UTC 2020 I: Starting 1st build on remote node jtx1c-armhf-rb.debian.net. Fri May 15 23:11:01 UTC 2020 I: Preparing to do remote build '1' on jtx1c-armhf-rb.debian.net. Fri May 15 23:12:10 UTC 2020 I: Deleting $TMPDIR on jtx1c-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri May 15 11:11:08 -12 2020 I: pbuilder-time-stamp: 1589584268 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libcgi-fast-perl_2.13-1.dsc] I: copying [./libcgi-fast-perl_2.13.orig.tar.gz] I: copying [./libcgi-fast-perl_2.13-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Nov 18 08:21:18 2017 -12 gpgv: using RSA key AEA0C44ECB056E93630D9D33DBBE9D4D99D2A004 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libcgi-fast-perl_2.13-1.dsc dpkg-source: info: extracting libcgi-fast-perl in libcgi-fast-perl-2.13 dpkg-source: info: unpacking libcgi-fast-perl_2.13.orig.tar.gz dpkg-source: info: unpacking libcgi-fast-perl_2.13-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying man-cgi-fast.patch I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), libcgi-pm-perl (>= 4), libfcgi-perl, libtest-deep-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libcgi-pm-perl (>= 4); however: Package libcgi-pm-perl is not installed. pbuilder-satisfydepends-dummy depends on libfcgi-perl; however: Package libfcgi-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-deep-perl; however: Package libtest-deep-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcgi-pm-perl{a} libcroco3{a} libelf1{a} libfcgi-perl{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtest-deep-perl{a} libtool{a} libuchardet0{a} liburi-perl{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libcgi-fast-perl libglib2.0-data libgpm2 libhttp-message-perl libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 18.7 MB of archives. After unpacking 64.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libhtml-tagset-perl all 3.20-3 [12.7 kB] Get: 35 http://deb.debian.org/debian buster/main armhf liburi-perl all 1.76-1 [89.9 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libhtml-parser-perl armhf 3.72-3+b3 [102 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libcgi-pm-perl all 4.40-1 [222 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libfcgi-perl armhf 0.78-2+b3 [34.8 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libtest-deep-perl all 1.128-1 [48.8 kB] Fetched 18.7 MB in 2s (8013 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../33-libhtml-tagset-perl_3.20-3_all.deb ... Unpacking libhtml-tagset-perl (3.20-3) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../34-liburi-perl_1.76-1_all.deb ... Unpacking liburi-perl (1.76-1) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../35-libhtml-parser-perl_3.72-3+b3_armhf.deb ... Unpacking libhtml-parser-perl (3.72-3+b3) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../36-libcgi-pm-perl_4.40-1_all.deb ... Unpacking libcgi-pm-perl (4.40-1) ... Selecting previously unselected package libfcgi-perl. Preparing to unpack .../37-libfcgi-perl_0.78-2+b3_armhf.deb ... Unpacking libfcgi-perl (0.78-2+b3) ... Selecting previously unselected package libtest-deep-perl. Preparing to unpack .../38-libtest-deep-perl_1.128-1_all.deb ... Unpacking libtest-deep-perl (1.128-1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libtest-deep-perl (1.128-1) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libhtml-tagset-perl (3.20-3) ... Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libfcgi-perl (0.78-2+b3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up liburi-perl (1.76-1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libhtml-parser-perl (3.72-3+b3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up libcgi-pm-perl (4.40-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libcgi-fast-perl-2.13/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libcgi-fast-perl dpkg-buildpackage: info: source version 1:2.13-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Damyan Ivanov dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libcgi-fast-perl-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libcgi-fast-perl-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Warning: LINKTYPE set to '', no longer necessary Generating a Unix-style Makefile Writing Makefile for CGI::Fast Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libcgi-fast-perl-2.13' cp lib/CGI/Fast.pm blib/lib/CGI/Fast.pm Manifying 1 pod document make[1]: Leaving directory '/build/libcgi-fast-perl-2.13' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libcgi-fast-perl-2.13' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/001_basic.t .............. 1..9 ok 1 - created new CGI::Fast object ok 2 - checking to see if the object was stored properly ok 3 - no params ok 4 - creating object with params ok 5 - checking passed param ok 6 - reality check default value for CGI::HEADERS_ONCE++ ok 7 - pragma in subclass set package variable in parent class. ok 8 - reality check: something was returned from CGI::Fast->new besides undef ok 9 - package variable in parent class persists through multiple calls to CGI::Fast->new ok t/002_import.t ............. 1..3 ok 1 - imported socket_path ok 2 - imported listen_queue ok 3 - pragma in subclass set package variable in parent class. ok t/003_env_pollution.t ...... 1..18 ok 1 - ENV variables set from current environment ok 2 - ENV variables set from current environment ok 3 - ENV variables set from current environment ok 4 - ENV variables set from current environment ok 5 - ENV variables not reused from last request ok 6 - ENV variables not reused from last request ok 7 - ENV variables not reused from last request ok 8 - ENV variables set from current environment ok 9 - ENV variables set from current environment ok 10 - ENV variables set from current environment ok 11 - ENV variables set from current environment ok 12 - ENV variables not reused from last request ok 13 - ENV variables not reused from last request ok 14 - ENV variables not reused from last request ok 15 - ENV variables set from current environment ok 16 - ENV variables set from current environment ok 17 - ENV variables set from current environment ok 18 - ENV variables set from current environment ok t/004_fcgi_file_handles.t .. 1..4 ok 1 - file handle passed to FCGI ok 2 - file handle passed to FCGI ok 3 - file handle passed to FCGI ok 4 - CGI::Fast->new ok t/005_no_file_handles.t .... 1..4 ok 1 - 'no file handle passed to FCGI' isa 'GLOB' ok 2 - 'no file handle passed to FCGI' isa 'GLOB' ok 3 - 'no file handle passed to FCGI' isa 'GLOB' ok 4 - CGI::Fast->new ok t/006_changes.t ............ skipped: Test::CPAN::Changes required for this test [Fri May 15 11:11:59 2020] 007_socket_perm.t: Use of uninitialized value in numeric ge (>=) at /build/libcgi-fast-perl-2.13/blib/lib/CGI/Fast.pm line 94. [Fri May 15 11:11:59 2020] 007_socket_perm.t: Use of uninitialized value in numeric ge (>=) at /build/libcgi-fast-perl-2.13/blib/lib/CGI/Fast.pm line 94. [Fri May 15 11:11:59 2020] 007_socket_perm.t: Use of uninitialized value in numeric ge (>=) at /build/libcgi-fast-perl-2.13/blib/lib/CGI/Fast.pm line 94. t/007_socket_perm.t ........ ok 1 - socket not exists ok 2 - socket was created ok 3 - socket has default perms ok 4 - socket not exists ok 5 - socket was created ok 6 - socket has given perms ok 7 - socket not exists ok 8 - socket was created ok 9 - $FCGI_SOCKET_PERM has higher priority 1..9 ok All tests successful. Files=7, Tests=47, 2 wallclock secs ( 0.10 usr 0.02 sys + 2.04 cusr 0.14 csys = 2.30 CPU) Result: PASS make[1]: Leaving directory '/build/libcgi-fast-perl-2.13' fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/libcgi-fast-perl-2.13/debian/libcgi-fast-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libcgi-fast-perl-2.13' Manifying 1 pod document Installing /build/libcgi-fast-perl-2.13/debian/libcgi-fast-perl/usr/share/perl5/CGI/Fast.pm Installing /build/libcgi-fast-perl-2.13/debian/libcgi-fast-perl/usr/share/man/man3/CGI::Fast.3pm make[1]: Leaving directory '/build/libcgi-fast-perl-2.13' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcgi-fast-perl' in '../libcgi-fast-perl_2.13-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libcgi-fast-perl_2.13-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/11096 and its subdirectories I: Current time: Fri May 15 11:12:06 -12 2020 I: pbuilder-time-stamp: 1589584326 Fri May 15 23:12:13 UTC 2020 I: 1st build successful. Starting 2nd build on remote node odu3a-armhf-rb.debian.net. Fri May 15 23:12:13 UTC 2020 I: Preparing to do remote build '2' on odu3a-armhf-rb.debian.net. Fri May 15 23:15:58 UTC 2020 I: Deleting $TMPDIR on odu3a-armhf-rb.debian.net. Fri May 15 23:16:00 UTC 2020 I: libcgi-fast-perl_2.13-1_armhf.changes: Format: 1.8 Date: Sat, 18 Nov 2017 20:20:30 +0000 Source: libcgi-fast-perl Binary: libcgi-fast-perl Architecture: all Version: 1:2.13-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Damyan Ivanov Description: libcgi-fast-perl - CGI subclass for work with FCGI Changes: libcgi-fast-perl (1:2.13-1) unstable; urgency=medium . * Team upload . * New upstream version 2.13 * declare conformance with Policy 4.1.1 (no changes needed) Checksums-Sha1: 062690e310cb9af5692c6c794b2ef28900da7af6 11464 libcgi-fast-perl_2.13-1_all.deb 4349cf7866ff782066ab92d8563284be1c198ec7 4430 libcgi-fast-perl_2.13-1_armhf.buildinfo Checksums-Sha256: 1ff85788a7cee7147ea0b036c36727ddab64d6808b4477ece5d847a452b3ff03 11464 libcgi-fast-perl_2.13-1_all.deb aa3c2b0f86187e37c15a9bb882b841d05ffc1c2f3a3ea486da2bf8d21a4bb836 4430 libcgi-fast-perl_2.13-1_armhf.buildinfo Files: d9146fd01120e9b40ed6aba700636547 11464 perl optional libcgi-fast-perl_2.13-1_all.deb 1f4feb17bf2ded0ad0bd16cfa5a30389 4430 perl optional libcgi-fast-perl_2.13-1_armhf.buildinfo Fri May 15 23:16:02 UTC 2020 I: diffoscope 143 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.FrEj12g4Ms/libcgi-fast-perl_2.13-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.FrEj12g4Ms/libcgi-fast-perl_2.13-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.FrEj12g4Ms/libcgi-fast-perl_2.13-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.FrEj12g4Ms/b1/libcgi-fast-perl_2.13-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.FrEj12g4Ms/b2/libcgi-fast-perl_2.13-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.289s) 0.289s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.044s) 0.044s 10 calls diffoscope.comparators.binary.FilesystemFile Fri May 15 23:16:04 UTC 2020 I: diffoscope 143 found no differences in the changes files, and a .buildinfo file also exists. Fri May 15 23:16:04 UTC 2020 I: libcgi-fast-perl from buster built successfully and reproducibly on armhf. Fri May 15 23:16:06 UTC 2020 I: Submitting .buildinfo files to external archives: Fri May 15 23:16:06 UTC 2020 I: Submitting 8.0K b1/libcgi-fast-perl_2.13-1_armhf.buildinfo.asc Fri May 15 23:16:08 UTC 2020 I: Submitting 8.0K b2/libcgi-fast-perl_2.13-1_armhf.buildinfo.asc Fri May 15 23:16:09 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 15 23:16:09 UTC 2020 I: Done submitting .buildinfo files. Fri May 15 23:16:09 UTC 2020 I: Removing signed libcgi-fast-perl_2.13-1_armhf.buildinfo.asc files: removed './b1/libcgi-fast-perl_2.13-1_armhf.buildinfo.asc' removed './b2/libcgi-fast-perl_2.13-1_armhf.buildinfo.asc'