Sun Jul 5 21:26:02 UTC 2020 I: starting to build libaosd/buster/armhf on jenkins on '2020-07-05 21:25' Sun Jul 5 21:26:02 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_2/1260/console.log Sun Jul 5 21:26:02 UTC 2020 I: Downloading source for buster/libaosd=0.2.7-1.1 --2020-07-05 21:26:02-- http://deb.debian.org/debian/pool/main/liba/libaosd/libaosd_0.2.7-1.1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1626 (1.6K) Saving to: ‘libaosd_0.2.7-1.1.dsc’ 0K . 100% 106M=0s 2020-07-05 21:26:02 (106 MB/s) - ‘libaosd_0.2.7-1.1.dsc’ saved [1626/1626] Sun Jul 5 21:26:02 UTC 2020 I: libaosd_0.2.7-1.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libaosd Binary: aosd-cat, libaosd-dev, libaosd2, libaosd-text2 Architecture: any Version: 0.2.7-1.1 Maintainer: Eugene Paskevich Homepage: http://www.atheme.org/project/libaosd Standards-Version: 3.9.1 Build-Depends: debhelper (>= 7.0.50~), autotools-dev, libx11-dev, libice-dev, libpango1.0-dev, libcairo2-dev, libxcomposite-dev, libxrender-dev Package-List: aosd-cat deb x11 optional arch=any libaosd-dev deb libdevel optional arch=any libaosd-text2 deb libs optional arch=any libaosd2 deb libs optional arch=any Checksums-Sha1: f3508e4ccb166bed17aa31129c53d17b2f2d3836 89908 libaosd_0.2.7.orig.tar.gz e6e2c08f634137bb2eb207ab8433bac29a678cca 3356 libaosd_0.2.7-1.1.debian.tar.xz Checksums-Sha256: 073f30270964688f0cee9c59a46f03b74f73441f5adbe79d53f7787d35d37b8d 89908 libaosd_0.2.7.orig.tar.gz a24d284a712c3320f77d0af71dc216e2052f6877825e3b298bc749a484c5ddfd 3356 libaosd_0.2.7-1.1.debian.tar.xz Files: 1240768f0b2669092fd384efd97cb080 89908 libaosd_0.2.7.orig.tar.gz 17dd4157bbf428f42c398a5c2f7fb19c 3356 libaosd_0.2.7-1.1.debian.tar.xz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBCAAGBQJUSRHGAAoJECVrfCskLhme1NYH/1ONP486d2z3ySUJVvFD3yiX qwd6EesRQ5P9oPioFBUnQUq8OV7uyLcra+k2FTfY6r597cexeGkIO7dvF7dzwahn AXZMWuibnpJ0wIBbGco0LpnwEiQnShmsmpuEu13gkZQQ3fLn+lntxKGFrRBx61U2 TrhEI3Em4D5aTm2Ha2uaoAS1S8nbe2NijTtlxAmMygZ4Cx8WvGEwp2TPIniNkziI MV+N1K3iQBHXBTmM7NEpCR1eVtaiZuTWeCtAj2ZvehE9iP73biK0iFcd9KyewKKM RRsNmwrl/Kf02Y6TnnM3ySdBqaSHFJLzBtImYz3lnyVunCg0aHxN90pnIc3sDUE= =Vx1J -----END PGP SIGNATURE----- Sun Jul 5 21:26:02 UTC 2020 I: Checking whether the package is not for us Sun Jul 5 21:26:02 UTC 2020 I: Starting 1st build on remote node bbx15-armhf-rb.debian.net. Sun Jul 5 21:26:02 UTC 2020 I: Preparing to do remote build '1' on bbx15-armhf-rb.debian.net. Sun Jul 5 21:29:55 UTC 2020 I: Deleting $TMPDIR on bbx15-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Jul 5 09:26:14 -12 2020 I: pbuilder-time-stamp: 1593984374 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libaosd_0.2.7-1.1.dsc] I: copying [./libaosd_0.2.7.orig.tar.gz] I: copying [./libaosd_0.2.7-1.1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Thu Oct 23 02:33:42 2014 -12 gpgv: using RSA key 256B7C2B242E199E gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libaosd_0.2.7-1.1.dsc dpkg-source: info: extracting libaosd in libaosd-0.2.7 dpkg-source: info: unpacking libaosd_0.2.7.orig.tar.gz dpkg-source: info: unpacking libaosd_0.2.7-1.1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying dont-hide-build-process I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1596/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='dd3966a6ded640538cb29140e2eeda09' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1596' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.EmYQDd1SAc/pbuilderrc_L3lx --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.EmYQDd1SAc/b1 --logfile b1/build.log libaosd_0.2.7-1.1.dsc' SUDO_GID='116' SUDO_UID='111' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux bbx15 4.19.0-9-armmp-lpae #1 SMP Debian 4.19.118-2+deb10u1 (2020-06-07) armv7l GNU/Linux I: ls -l /bin total 3328 -rwxr-xr-x 1 root root 767656 Apr 17 2019 bash -rwxr-xr-x 3 root root 26052 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 9636 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 22432 Feb 28 2019 cat -rwxr-xr-x 1 root root 38868 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 38836 Feb 28 2019 chmod -rwxr-xr-x 1 root root 42972 Feb 28 2019 chown -rwxr-xr-x 1 root root 88376 Feb 28 2019 cp -rwxr-xr-x 1 root root 75516 Jan 17 2019 dash -rwxr-xr-x 1 root root 71648 Feb 28 2019 date -rwxr-xr-x 1 root root 51212 Feb 28 2019 dd -rwxr-xr-x 1 root root 55672 Feb 28 2019 df -rwxr-xr-x 1 root root 88444 Feb 28 2019 dir -rwxr-xr-x 1 root root 54872 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 22364 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 18260 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 47356 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 21980 Apr 22 07:38 fusermount -rwxr-xr-x 1 root root 124508 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 64232 Jan 5 2019 gzip -rwxr-xr-x 1 root root 13784 Sep 26 2018 hostname -rwxr-xr-x 1 root root 43044 Feb 28 2019 ln -rwxr-xr-x 1 root root 34932 Jul 26 2018 login -rwxr-xr-x 1 root root 88444 Feb 28 2019 ls -rwxr-xr-x 1 root root 67036 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 47168 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 43040 Feb 28 2019 mknod -rwxr-xr-x 1 root root 26552 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 26024 Jan 9 2019 more -rwsr-xr-x 1 root root 34268 Jan 9 2019 mount -rwxr-xr-x 1 root root 9688 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 84284 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 22416 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 26504 Feb 28 2019 readlink -rwxr-xr-x 1 root root 42968 Feb 28 2019 rm -rwxr-xr-x 1 root root 26496 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 14136 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 3 20:27 sh -> dash -rwxr-xr-x 1 root root 22384 Feb 28 2019 sleep -rwxr-xr-x 1 root root 51124 Feb 28 2019 stty -rwsr-xr-x 1 root root 42472 Jan 9 2019 su -rwxr-xr-x 1 root root 22392 Feb 28 2019 sync -rwxr-xr-x 1 root root 283324 Apr 23 2019 tar -rwxr-xr-x 1 root root 9808 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 63464 Feb 28 2019 touch -rwxr-xr-x 1 root root 18260 Feb 28 2019 true -rwxr-xr-x 1 root root 9636 Apr 22 07:38 ulockmgr_server -rwsr-xr-x 1 root root 21976 Jan 9 2019 umount -rwxr-xr-x 1 root root 22380 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 88444 Feb 28 2019 vdir -rwxr-xr-x 1 root root 21980 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/1596/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 7.0.50~), autotools-dev, libx11-dev, libice-dev, libpango1.0-dev, libcairo2-dev, libxcomposite-dev, libxrender-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 7.0.50~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev; however: Package autotools-dev is not installed. pbuilder-satisfydepends-dummy depends on libx11-dev; however: Package libx11-dev is not installed. pbuilder-satisfydepends-dummy depends on libice-dev; however: Package libice-dev is not installed. pbuilder-satisfydepends-dummy depends on libpango1.0-dev; however: Package libpango1.0-dev is not installed. pbuilder-satisfydepends-dummy depends on libcairo2-dev; however: Package libcairo2-dev is not installed. pbuilder-satisfydepends-dummy depends on libxcomposite-dev; however: Package libxcomposite-dev is not installed. pbuilder-satisfydepends-dummy depends on libxrender-dev; however: Package libxrender-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} fontconfig{a} fontconfig-config{a} fonts-dejavu-core{a} gettext{a} gettext-base{a} gir1.2-freedesktop{a} gir1.2-glib-2.0{a} gir1.2-harfbuzz-0.0{a} gir1.2-pango-1.0{a} groff-base{a} icu-devtools{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libbsd0{a} libcairo-gobject2{a} libcairo-script-interpreter2{a} libcairo2{a} libcairo2-dev{a} libcroco3{a} libdatrie1{a} libelf1{a} libexpat1{a} libexpat1-dev{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libfontconfig1{a} libfontconfig1-dev{a} libfreetype6{a} libfreetype6-dev{a} libfribidi-dev{a} libfribidi0{a} libgirepository-1.0-1{a} libglib2.0-0{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libgraphite2-3{a} libgraphite2-dev{a} libharfbuzz-dev{a} libharfbuzz-gobject0{a} libharfbuzz-icu0{a} libharfbuzz0b{a} libice-dev{a} libice6{a} libicu-dev{a} libicu63{a} liblzo2-2{a} libmagic-mgc{a} libmagic1{a} libmount-dev{a} libmpdec2{a} libncurses6{a} libpango-1.0-0{a} libpango1.0-dev{a} libpangocairo-1.0-0{a} libpangoft2-1.0-0{a} libpangoxft-1.0-0{a} libpcre16-3{a} libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpipeline1{a} libpixman-1-0{a} libpixman-1-dev{a} libpng-dev{a} libpng16-16{a} libpthread-stubs0-dev{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libselinux1-dev{a} libsepol1-dev{a} libsigsegv2{a} libsm-dev{a} libsm6{a} libssl1.1{a} libthai-data{a} libthai0{a} libtool{a} libuchardet0{a} libx11-6{a} libx11-data{a} libx11-dev{a} libxau-dev{a} libxau6{a} libxcb-render0{a} libxcb-render0-dev{a} libxcb-shm0{a} libxcb-shm0-dev{a} libxcb1{a} libxcb1-dev{a} libxcomposite-dev{a} libxcomposite1{a} libxdmcp-dev{a} libxdmcp6{a} libxext-dev{a} libxext6{a} libxfixes-dev{a} libxfixes3{a} libxft-dev{a} libxft2{a} libxml2{a} libxrender-dev{a} libxrender1{a} lsb-base{a} m4{a} man-db{a} mime-support{a} pango1.0-tools{a} pkg-config{a} po-debconf{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} ucf{a} uuid-dev{a} x11-common{a} x11proto-composite-dev{a} x11proto-core-dev{a} x11proto-dev{a} x11proto-fixes-dev{a} x11proto-xext-dev{a} xorg-sgml-doctools{a} xtrans-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl libpng-tools lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 143 newly installed, 0 to remove and 0 not upgraded. Need to get 56.1 MB of archives. After unpacking 188 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libpython3.7-minimal armhf 3.7.3-2+deb10u1 [582 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libexpat1 armhf 2.2.6-2+deb10u1 [78.0 kB] Get: 10 http://deb.debian.org/debian buster/main armhf python3.7-minimal armhf 3.7.3-2+deb10u1 [1465 kB] Get: 11 http://deb.debian.org/debian buster/main armhf python3-minimal armhf 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main armhf mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libmpdec2 armhf 2.4.2-2 [69.3 kB] Get: 14 http://deb.debian.org/debian buster/main armhf readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main armhf libreadline7 armhf 7.0-5 [131 kB] Get: 16 http://deb.debian.org/debian buster/main armhf libpython3.7-stdlib armhf 3.7.3-2+deb10u1 [1660 kB] Get: 17 http://deb.debian.org/debian buster/main armhf python3.7 armhf 3.7.3-2+deb10u1 [330 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libpython3-stdlib armhf 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main armhf python3 armhf 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 23 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 24 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 25 http://deb.debian.org/debian buster/main armhf ucf all 3.0038+nmu1 [69.0 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 27 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 28 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 29 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 30 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 31 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 32 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 33 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 36 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 38 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 43 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 44 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 45 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 46 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 47 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 48 http://deb.debian.org/debian buster/main armhf libpng16-16 armhf 1.6.36-6 [275 kB] Get: 49 http://deb.debian.org/debian buster/main armhf libfreetype6 armhf 2.9.1-3+deb10u1 [322 kB] Get: 50 http://deb.debian.org/debian buster/main armhf fonts-dejavu-core all 2.37-1 [1068 kB] Get: 51 http://deb.debian.org/debian buster/main armhf fontconfig-config all 2.13.1-2 [280 kB] Get: 52 http://deb.debian.org/debian buster/main armhf libfontconfig1 armhf 2.13.1-2 [328 kB] Get: 53 http://deb.debian.org/debian buster/main armhf fontconfig armhf 2.13.1-2 [404 kB] Get: 54 http://deb.debian.org/debian buster/main armhf libgirepository-1.0-1 armhf 1.58.3-2 [80.2 kB] Get: 55 http://deb.debian.org/debian buster/main armhf gir1.2-glib-2.0 armhf 1.58.3-2 [143 kB] Get: 56 http://deb.debian.org/debian buster/main armhf libpixman-1-0 armhf 0.36.0-1 [465 kB] Get: 57 http://deb.debian.org/debian buster/main armhf libxau6 armhf 1:1.0.8-1+b2 [19.1 kB] Get: 58 http://deb.debian.org/debian buster/main armhf libxdmcp6 armhf 1:1.1.2-3 [24.9 kB] Get: 59 http://deb.debian.org/debian buster/main armhf libxcb1 armhf 1.13.1-2 [132 kB] Get: 60 http://deb.debian.org/debian buster/main armhf libx11-data all 2:1.6.7-1 [298 kB] Get: 61 http://deb.debian.org/debian buster/main armhf libx11-6 armhf 2:1.6.7-1 [698 kB] Get: 62 http://deb.debian.org/debian buster/main armhf libxcb-render0 armhf 1.13.1-2 [108 kB] Get: 63 http://deb.debian.org/debian buster/main armhf libxcb-shm0 armhf 1.13.1-2 [99.0 kB] Get: 64 http://deb.debian.org/debian buster/main armhf libxext6 armhf 2:1.3.3-1+b2 [48.1 kB] Get: 65 http://deb.debian.org/debian buster/main armhf libxrender1 armhf 1:0.9.10-1 [29.9 kB] Get: 66 http://deb.debian.org/debian buster/main armhf libcairo2 armhf 1.16.0-4 [616 kB] Get: 67 http://deb.debian.org/debian buster/main armhf libcairo-gobject2 armhf 1.16.0-4 [123 kB] Get: 68 http://deb.debian.org/debian buster/main armhf gir1.2-freedesktop armhf 1.58.3-2 [20.3 kB] Get: 69 http://deb.debian.org/debian buster/main armhf libgraphite2-3 armhf 1.3.13-7 [70.3 kB] Get: 70 http://deb.debian.org/debian buster/main armhf libharfbuzz0b armhf 2.3.1-1 [1151 kB] Get: 71 http://deb.debian.org/debian buster/main armhf libharfbuzz-gobject0 armhf 2.3.1-1 [845 kB] Get: 72 http://deb.debian.org/debian buster/main armhf gir1.2-harfbuzz-0.0 armhf 2.3.1-1 [853 kB] Get: 73 http://deb.debian.org/debian buster/main armhf libfribidi0 armhf 1.0.5-3.1+deb10u1 [61.7 kB] Get: 74 http://deb.debian.org/debian buster/main armhf libthai-data all 0.1.28-2 [170 kB] Get: 75 http://deb.debian.org/debian buster/main armhf libdatrie1 armhf 0.2.12-2 [35.8 kB] Get: 76 http://deb.debian.org/debian buster/main armhf libthai0 armhf 0.1.28-2 [50.7 kB] Get: 77 http://deb.debian.org/debian buster/main armhf libpango-1.0-0 armhf 1.42.4-8~deb10u1 [169 kB] Get: 78 http://deb.debian.org/debian buster/main armhf libpangoft2-1.0-0 armhf 1.42.4-8~deb10u1 [62.7 kB] Get: 79 http://deb.debian.org/debian buster/main armhf libpangocairo-1.0-0 armhf 1.42.4-8~deb10u1 [52.2 kB] Get: 80 http://deb.debian.org/debian buster/main armhf libxft2 armhf 2.3.2-2 [50.1 kB] Get: 81 http://deb.debian.org/debian buster/main armhf libpangoxft-1.0-0 armhf 1.42.4-8~deb10u1 [47.5 kB] Get: 82 http://deb.debian.org/debian buster/main armhf gir1.2-pango-1.0 armhf 1.42.4-8~deb10u1 [55.8 kB] Get: 83 http://deb.debian.org/debian buster/main armhf icu-devtools armhf 63.1-6+deb10u1 [168 kB] Get: 84 http://deb.debian.org/debian buster/main armhf uuid-dev armhf 2.33.1-0.1 [92.6 kB] Get: 85 http://deb.debian.org/debian buster/main armhf libblkid-dev armhf 2.33.1-0.1 [217 kB] Get: 86 http://deb.debian.org/debian buster/main armhf liblzo2-2 armhf 2.10-0.1 [49.7 kB] Get: 87 http://deb.debian.org/debian buster/main armhf libcairo-script-interpreter2 armhf 1.16.0-4 [151 kB] Get: 88 http://deb.debian.org/debian buster/main armhf libexpat1-dev armhf 2.2.6-2+deb10u1 [126 kB] Get: 89 http://deb.debian.org/debian buster/main armhf zlib1g-dev armhf 1:1.2.11.dfsg-1 [207 kB] Get: 90 http://deb.debian.org/debian buster/main armhf libpng-dev armhf 1.6.36-6 [286 kB] Get: 91 http://deb.debian.org/debian buster/main armhf libfreetype6-dev armhf 2.9.1-3+deb10u1 [491 kB] Get: 92 http://deb.debian.org/debian buster/main armhf pkg-config armhf 0.29-6 [60.7 kB] Get: 93 http://deb.debian.org/debian buster/main armhf libfontconfig1-dev armhf 2.13.1-2 [950 kB] Get: 94 http://deb.debian.org/debian buster/main armhf xorg-sgml-doctools all 1:1.11-1 [21.9 kB] Get: 95 http://deb.debian.org/debian buster/main armhf x11proto-dev all 2018.4-4 [251 kB] Get: 96 http://deb.debian.org/debian buster/main armhf x11proto-core-dev all 2018.4-4 [3128 B] Get: 97 http://deb.debian.org/debian buster/main armhf libxau-dev armhf 1:1.0.8-1+b2 [22.5 kB] Get: 98 http://deb.debian.org/debian buster/main armhf libxdmcp-dev armhf 1:1.1.2-3 [40.7 kB] Get: 99 http://deb.debian.org/debian buster/main armhf xtrans-dev all 1.3.5-1 [100 kB] Get: 100 http://deb.debian.org/debian buster/main armhf libpthread-stubs0-dev armhf 0.4-1 [5344 B] Get: 101 http://deb.debian.org/debian buster/main armhf libxcb1-dev armhf 1.13.1-2 [171 kB] Get: 102 http://deb.debian.org/debian buster/main armhf libx11-dev armhf 2:1.6.7-1 [771 kB] Get: 103 http://deb.debian.org/debian buster/main armhf libxrender-dev armhf 1:0.9.10-1 [37.8 kB] Get: 104 http://deb.debian.org/debian buster/main armhf x11proto-xext-dev all 2018.4-4 [3128 B] Get: 105 http://deb.debian.org/debian buster/main armhf libxext-dev armhf 2:1.3.3-1+b2 [103 kB] Get: 106 http://deb.debian.org/debian buster/main armhf lsb-base all 10.2019051400 [28.4 kB] Get: 107 http://deb.debian.org/debian buster/main armhf x11-common all 1:7.7+19 [251 kB] Get: 108 http://deb.debian.org/debian buster/main armhf libice6 armhf 2:1.0.9-2 [51.7 kB] Get: 109 http://deb.debian.org/debian buster/main armhf libsm6 armhf 2:1.2.3-1 [33.0 kB] Get: 110 http://deb.debian.org/debian buster/main armhf libice-dev armhf 2:1.0.9-2 [61.9 kB] Get: 111 http://deb.debian.org/debian buster/main armhf libsm-dev armhf 2:1.2.3-1 [36.1 kB] Get: 112 http://deb.debian.org/debian buster/main armhf libpixman-1-dev armhf 0.36.0-1 [486 kB] Get: 113 http://deb.debian.org/debian buster/main armhf libxcb-render0-dev armhf 1.13.1-2 [112 kB] Get: 114 http://deb.debian.org/debian buster/main armhf libxcb-shm0-dev armhf 1.13.1-2 [100 kB] Get: 115 http://deb.debian.org/debian buster/main armhf libffi-dev armhf 3.2.1-9 [154 kB] Get: 116 http://deb.debian.org/debian buster/main armhf libglib2.0-data all 2.58.3-2+deb10u2 [1110 kB] Get: 117 http://deb.debian.org/debian buster/main armhf libglib2.0-bin armhf 2.58.3-2+deb10u2 [119 kB] Get: 118 http://deb.debian.org/debian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB] Get: 119 http://deb.debian.org/debian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Get: 120 http://deb.debian.org/debian buster/main armhf libglib2.0-dev-bin armhf 2.58.3-2+deb10u2 [155 kB] Get: 121 http://deb.debian.org/debian buster/main armhf libmount-dev armhf 2.33.1-0.1 [223 kB] Get: 122 http://deb.debian.org/debian buster/main armhf libpcre16-3 armhf 2:8.39-12 [238 kB] Get: 123 http://deb.debian.org/debian buster/main armhf libpcre32-3 armhf 2:8.39-12 [231 kB] Get: 124 http://deb.debian.org/debian buster/main armhf libpcrecpp0v5 armhf 2:8.39-12 [150 kB] Get: 125 http://deb.debian.org/debian buster/main armhf libpcre3-dev armhf 2:8.39-12 [585 kB] Get: 126 http://deb.debian.org/debian buster/main armhf libsepol1-dev armhf 2.8-1 [318 kB] Get: 127 http://deb.debian.org/debian buster/main armhf libselinux1-dev armhf 2.8-1+b1 [162 kB] Get: 128 http://deb.debian.org/debian buster/main armhf libglib2.0-dev armhf 2.58.3-2+deb10u2 [1386 kB] Get: 129 http://deb.debian.org/debian buster/main armhf libcairo2-dev armhf 1.16.0-4 [662 kB] Get: 130 http://deb.debian.org/debian buster/main armhf libfribidi-dev armhf 1.0.5-3.1+deb10u1 [98.9 kB] Get: 131 http://deb.debian.org/debian buster/main armhf libgraphite2-dev armhf 1.3.13-7 [23.1 kB] Get: 132 http://deb.debian.org/debian buster/main armhf libharfbuzz-icu0 armhf 2.3.1-1 [833 kB] Get: 133 http://deb.debian.org/debian buster/main armhf libicu-dev armhf 63.1-6+deb10u1 [8940 kB] Get: 134 http://deb.debian.org/debian buster/main armhf libharfbuzz-dev armhf 2.3.1-1 [1269 kB] Get: 135 http://deb.debian.org/debian buster/main armhf libxft-dev armhf 2.3.2-2 [62.3 kB] Get: 136 http://deb.debian.org/debian buster/main armhf pango1.0-tools armhf 1.42.4-8~deb10u1 [53.1 kB] Get: 137 http://deb.debian.org/debian buster/main armhf libpango1.0-dev armhf 1.42.4-8~deb10u1 [139 kB] Get: 138 http://deb.debian.org/debian buster/main armhf libxcomposite1 armhf 1:0.4.4-2 [16.0 kB] Get: 139 http://deb.debian.org/debian buster/main armhf libxfixes3 armhf 1:5.0.3-1 [20.6 kB] Get: 140 http://deb.debian.org/debian buster/main armhf x11proto-fixes-dev all 1:2018.4-4 [3140 B] Get: 141 http://deb.debian.org/debian buster/main armhf libxfixes-dev armhf 1:5.0.3-1 [22.7 kB] Get: 142 http://deb.debian.org/debian buster/main armhf x11proto-composite-dev all 1:2018.4-4 [3140 B] Get: 143 http://deb.debian.org/debian buster/main armhf libxcomposite-dev armhf 1:0.4.4-2 [19.8 kB] Fetched 56.1 MB in 41s (1378 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../2-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../4-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u1) ... Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Setting up libexpat1:armhf (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_armhf.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../2-libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../4-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20288 files and directories currently installed.) Preparing to unpack .../000-python3_3.7.3-1_armhf.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../001-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../002-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../003-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../004-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../005-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package ucf. Preparing to unpack .../006-ucf_3.0038+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0038+nmu1) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../007-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../008-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../009-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../010-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../011-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../012-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../013-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../014-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../015-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../016-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../017-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../018-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../019-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../020-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../021-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../022-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../023-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../024-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../025-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../026-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../027-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../028-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libpng16-16:armhf. Preparing to unpack .../029-libpng16-16_1.6.36-6_armhf.deb ... Unpacking libpng16-16:armhf (1.6.36-6) ... Selecting previously unselected package libfreetype6:armhf. Preparing to unpack .../030-libfreetype6_2.9.1-3+deb10u1_armhf.deb ... Unpacking libfreetype6:armhf (2.9.1-3+deb10u1) ... Selecting previously unselected package fonts-dejavu-core. Preparing to unpack .../031-fonts-dejavu-core_2.37-1_all.deb ... Unpacking fonts-dejavu-core (2.37-1) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../032-fontconfig-config_2.13.1-2_all.deb ... Unpacking fontconfig-config (2.13.1-2) ... Selecting previously unselected package libfontconfig1:armhf. Preparing to unpack .../033-libfontconfig1_2.13.1-2_armhf.deb ... Unpacking libfontconfig1:armhf (2.13.1-2) ... Selecting previously unselected package fontconfig. Preparing to unpack .../034-fontconfig_2.13.1-2_armhf.deb ... Unpacking fontconfig (2.13.1-2) ... Selecting previously unselected package libgirepository-1.0-1:armhf. Preparing to unpack .../035-libgirepository-1.0-1_1.58.3-2_armhf.deb ... Unpacking libgirepository-1.0-1:armhf (1.58.3-2) ... Selecting previously unselected package gir1.2-glib-2.0:armhf. Preparing to unpack .../036-gir1.2-glib-2.0_1.58.3-2_armhf.deb ... Unpacking gir1.2-glib-2.0:armhf (1.58.3-2) ... Selecting previously unselected package libpixman-1-0:armhf. Preparing to unpack .../037-libpixman-1-0_0.36.0-1_armhf.deb ... Unpacking libpixman-1-0:armhf (0.36.0-1) ... Selecting previously unselected package libxau6:armhf. Preparing to unpack .../038-libxau6_1%3a1.0.8-1+b2_armhf.deb ... Unpacking libxau6:armhf (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp6:armhf. Preparing to unpack .../039-libxdmcp6_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp6:armhf (1:1.1.2-3) ... Selecting previously unselected package libxcb1:armhf. Preparing to unpack .../040-libxcb1_1.13.1-2_armhf.deb ... Unpacking libxcb1:armhf (1.13.1-2) ... Selecting previously unselected package libx11-data. Preparing to unpack .../041-libx11-data_2%3a1.6.7-1_all.deb ... Unpacking libx11-data (2:1.6.7-1) ... Selecting previously unselected package libx11-6:armhf. Preparing to unpack .../042-libx11-6_2%3a1.6.7-1_armhf.deb ... Unpacking libx11-6:armhf (2:1.6.7-1) ... Selecting previously unselected package libxcb-render0:armhf. Preparing to unpack .../043-libxcb-render0_1.13.1-2_armhf.deb ... Unpacking libxcb-render0:armhf (1.13.1-2) ... Selecting previously unselected package libxcb-shm0:armhf. Preparing to unpack .../044-libxcb-shm0_1.13.1-2_armhf.deb ... Unpacking libxcb-shm0:armhf (1.13.1-2) ... Selecting previously unselected package libxext6:armhf. Preparing to unpack .../045-libxext6_2%3a1.3.3-1+b2_armhf.deb ... Unpacking libxext6:armhf (2:1.3.3-1+b2) ... Selecting previously unselected package libxrender1:armhf. Preparing to unpack .../046-libxrender1_1%3a0.9.10-1_armhf.deb ... Unpacking libxrender1:armhf (1:0.9.10-1) ... Selecting previously unselected package libcairo2:armhf. Preparing to unpack .../047-libcairo2_1.16.0-4_armhf.deb ... Unpacking libcairo2:armhf (1.16.0-4) ... Selecting previously unselected package libcairo-gobject2:armhf. Preparing to unpack .../048-libcairo-gobject2_1.16.0-4_armhf.deb ... Unpacking libcairo-gobject2:armhf (1.16.0-4) ... Selecting previously unselected package gir1.2-freedesktop:armhf. Preparing to unpack .../049-gir1.2-freedesktop_1.58.3-2_armhf.deb ... Unpacking gir1.2-freedesktop:armhf (1.58.3-2) ... Selecting previously unselected package libgraphite2-3:armhf. Preparing to unpack .../050-libgraphite2-3_1.3.13-7_armhf.deb ... Unpacking libgraphite2-3:armhf (1.3.13-7) ... Selecting previously unselected package libharfbuzz0b:armhf. Preparing to unpack .../051-libharfbuzz0b_2.3.1-1_armhf.deb ... Unpacking libharfbuzz0b:armhf (2.3.1-1) ... Selecting previously unselected package libharfbuzz-gobject0:armhf. Preparing to unpack .../052-libharfbuzz-gobject0_2.3.1-1_armhf.deb ... Unpacking libharfbuzz-gobject0:armhf (2.3.1-1) ... Selecting previously unselected package gir1.2-harfbuzz-0.0:armhf. Preparing to unpack .../053-gir1.2-harfbuzz-0.0_2.3.1-1_armhf.deb ... Unpacking gir1.2-harfbuzz-0.0:armhf (2.3.1-1) ... Selecting previously unselected package libfribidi0:armhf. Preparing to unpack .../054-libfribidi0_1.0.5-3.1+deb10u1_armhf.deb ... Unpacking libfribidi0:armhf (1.0.5-3.1+deb10u1) ... Selecting previously unselected package libthai-data. Preparing to unpack .../055-libthai-data_0.1.28-2_all.deb ... Unpacking libthai-data (0.1.28-2) ... Selecting previously unselected package libdatrie1:armhf. Preparing to unpack .../056-libdatrie1_0.2.12-2_armhf.deb ... Unpacking libdatrie1:armhf (0.2.12-2) ... Selecting previously unselected package libthai0:armhf. Preparing to unpack .../057-libthai0_0.1.28-2_armhf.deb ... Unpacking libthai0:armhf (0.1.28-2) ... Selecting previously unselected package libpango-1.0-0:armhf. Preparing to unpack .../058-libpango-1.0-0_1.42.4-8~deb10u1_armhf.deb ... Unpacking libpango-1.0-0:armhf (1.42.4-8~deb10u1) ... Selecting previously unselected package libpangoft2-1.0-0:armhf. Preparing to unpack .../059-libpangoft2-1.0-0_1.42.4-8~deb10u1_armhf.deb ... Unpacking libpangoft2-1.0-0:armhf (1.42.4-8~deb10u1) ... Selecting previously unselected package libpangocairo-1.0-0:armhf. Preparing to unpack .../060-libpangocairo-1.0-0_1.42.4-8~deb10u1_armhf.deb ... Unpacking libpangocairo-1.0-0:armhf (1.42.4-8~deb10u1) ... Selecting previously unselected package libxft2:armhf. Preparing to unpack .../061-libxft2_2.3.2-2_armhf.deb ... Unpacking libxft2:armhf (2.3.2-2) ... Selecting previously unselected package libpangoxft-1.0-0:armhf. Preparing to unpack .../062-libpangoxft-1.0-0_1.42.4-8~deb10u1_armhf.deb ... Unpacking libpangoxft-1.0-0:armhf (1.42.4-8~deb10u1) ... Selecting previously unselected package gir1.2-pango-1.0:armhf. Preparing to unpack .../063-gir1.2-pango-1.0_1.42.4-8~deb10u1_armhf.deb ... Unpacking gir1.2-pango-1.0:armhf (1.42.4-8~deb10u1) ... Selecting previously unselected package icu-devtools. Preparing to unpack .../064-icu-devtools_63.1-6+deb10u1_armhf.deb ... Unpacking icu-devtools (63.1-6+deb10u1) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../065-uuid-dev_2.33.1-0.1_armhf.deb ... Unpacking uuid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../066-libblkid-dev_2.33.1-0.1_armhf.deb ... Unpacking libblkid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package liblzo2-2:armhf. Preparing to unpack .../067-liblzo2-2_2.10-0.1_armhf.deb ... Unpacking liblzo2-2:armhf (2.10-0.1) ... Selecting previously unselected package libcairo-script-interpreter2:armhf. Preparing to unpack .../068-libcairo-script-interpreter2_1.16.0-4_armhf.deb ... Unpacking libcairo-script-interpreter2:armhf (1.16.0-4) ... Selecting previously unselected package libexpat1-dev:armhf. Preparing to unpack .../069-libexpat1-dev_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1-dev:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../070-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libpng-dev:armhf. Preparing to unpack .../071-libpng-dev_1.6.36-6_armhf.deb ... Unpacking libpng-dev:armhf (1.6.36-6) ... Selecting previously unselected package libfreetype6-dev:armhf. Preparing to unpack .../072-libfreetype6-dev_2.9.1-3+deb10u1_armhf.deb ... Unpacking libfreetype6-dev:armhf (2.9.1-3+deb10u1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../073-pkg-config_0.29-6_armhf.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package libfontconfig1-dev:armhf. Preparing to unpack .../074-libfontconfig1-dev_2.13.1-2_armhf.deb ... Unpacking libfontconfig1-dev:armhf (2.13.1-2) ... Selecting previously unselected package xorg-sgml-doctools. Preparing to unpack .../075-xorg-sgml-doctools_1%3a1.11-1_all.deb ... Unpacking xorg-sgml-doctools (1:1.11-1) ... Selecting previously unselected package x11proto-dev. Preparing to unpack .../076-x11proto-dev_2018.4-4_all.deb ... Unpacking x11proto-dev (2018.4-4) ... Selecting previously unselected package x11proto-core-dev. Preparing to unpack .../077-x11proto-core-dev_2018.4-4_all.deb ... Unpacking x11proto-core-dev (2018.4-4) ... Selecting previously unselected package libxau-dev:armhf. Preparing to unpack .../078-libxau-dev_1%3a1.0.8-1+b2_armhf.deb ... Unpacking libxau-dev:armhf (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp-dev:armhf. Preparing to unpack .../079-libxdmcp-dev_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp-dev:armhf (1:1.1.2-3) ... Selecting previously unselected package xtrans-dev. Preparing to unpack .../080-xtrans-dev_1.3.5-1_all.deb ... Unpacking xtrans-dev (1.3.5-1) ... Selecting previously unselected package libpthread-stubs0-dev:armhf. Preparing to unpack .../081-libpthread-stubs0-dev_0.4-1_armhf.deb ... Unpacking libpthread-stubs0-dev:armhf (0.4-1) ... Selecting previously unselected package libxcb1-dev:armhf. Preparing to unpack .../082-libxcb1-dev_1.13.1-2_armhf.deb ... Unpacking libxcb1-dev:armhf (1.13.1-2) ... Selecting previously unselected package libx11-dev:armhf. Preparing to unpack .../083-libx11-dev_2%3a1.6.7-1_armhf.deb ... Unpacking libx11-dev:armhf (2:1.6.7-1) ... Selecting previously unselected package libxrender-dev:armhf. Preparing to unpack .../084-libxrender-dev_1%3a0.9.10-1_armhf.deb ... Unpacking libxrender-dev:armhf (1:0.9.10-1) ... Selecting previously unselected package x11proto-xext-dev. Preparing to unpack .../085-x11proto-xext-dev_2018.4-4_all.deb ... Unpacking x11proto-xext-dev (2018.4-4) ... Selecting previously unselected package libxext-dev:armhf. Preparing to unpack .../086-libxext-dev_2%3a1.3.3-1+b2_armhf.deb ... Unpacking libxext-dev:armhf (2:1.3.3-1+b2) ... Selecting previously unselected package lsb-base. Preparing to unpack .../087-lsb-base_10.2019051400_all.deb ... Unpacking lsb-base (10.2019051400) ... Selecting previously unselected package x11-common. Preparing to unpack .../088-x11-common_1%3a7.7+19_all.deb ... Unpacking x11-common (1:7.7+19) ... Selecting previously unselected package libice6:armhf. Preparing to unpack .../089-libice6_2%3a1.0.9-2_armhf.deb ... Unpacking libice6:armhf (2:1.0.9-2) ... Selecting previously unselected package libsm6:armhf. Preparing to unpack .../090-libsm6_2%3a1.2.3-1_armhf.deb ... Unpacking libsm6:armhf (2:1.2.3-1) ... Selecting previously unselected package libice-dev:armhf. Preparing to unpack .../091-libice-dev_2%3a1.0.9-2_armhf.deb ... Unpacking libice-dev:armhf (2:1.0.9-2) ... Selecting previously unselected package libsm-dev:armhf. Preparing to unpack .../092-libsm-dev_2%3a1.2.3-1_armhf.deb ... Unpacking libsm-dev:armhf (2:1.2.3-1) ... Selecting previously unselected package libpixman-1-dev:armhf. Preparing to unpack .../093-libpixman-1-dev_0.36.0-1_armhf.deb ... Unpacking libpixman-1-dev:armhf (0.36.0-1) ... Selecting previously unselected package libxcb-render0-dev:armhf. Preparing to unpack .../094-libxcb-render0-dev_1.13.1-2_armhf.deb ... Unpacking libxcb-render0-dev:armhf (1.13.1-2) ... Selecting previously unselected package libxcb-shm0-dev:armhf. Preparing to unpack .../095-libxcb-shm0-dev_1.13.1-2_armhf.deb ... Unpacking libxcb-shm0-dev:armhf (1.13.1-2) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../096-libffi-dev_3.2.1-9_armhf.deb ... Unpacking libffi-dev:armhf (3.2.1-9) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../097-libglib2.0-data_2.58.3-2+deb10u2_all.deb ... Unpacking libglib2.0-data (2.58.3-2+deb10u2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../098-libglib2.0-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../099-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../100-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../101-libglib2.0-dev-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../102-libmount-dev_2.33.1-0.1_armhf.deb ... Unpacking libmount-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libpcre16-3:armhf. Preparing to unpack .../103-libpcre16-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre16-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcre32-3:armhf. Preparing to unpack .../104-libpcre32-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre32-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:armhf. Preparing to unpack .../105-libpcrecpp0v5_2%3a8.39-12_armhf.deb ... Unpacking libpcrecpp0v5:armhf (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:armhf. Preparing to unpack .../106-libpcre3-dev_2%3a8.39-12_armhf.deb ... Unpacking libpcre3-dev:armhf (2:8.39-12) ... Selecting previously unselected package libsepol1-dev:armhf. Preparing to unpack .../107-libsepol1-dev_2.8-1_armhf.deb ... Unpacking libsepol1-dev:armhf (2.8-1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../108-libselinux1-dev_2.8-1+b1_armhf.deb ... Unpacking libselinux1-dev:armhf (2.8-1+b1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../109-libglib2.0-dev_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libcairo2-dev:armhf. Preparing to unpack .../110-libcairo2-dev_1.16.0-4_armhf.deb ... Unpacking libcairo2-dev:armhf (1.16.0-4) ... Selecting previously unselected package libfribidi-dev:armhf. Preparing to unpack .../111-libfribidi-dev_1.0.5-3.1+deb10u1_armhf.deb ... Unpacking libfribidi-dev:armhf (1.0.5-3.1+deb10u1) ... Selecting previously unselected package libgraphite2-dev:armhf. Preparing to unpack .../112-libgraphite2-dev_1.3.13-7_armhf.deb ... Unpacking libgraphite2-dev:armhf (1.3.13-7) ... Selecting previously unselected package libharfbuzz-icu0:armhf. Preparing to unpack .../113-libharfbuzz-icu0_2.3.1-1_armhf.deb ... Unpacking libharfbuzz-icu0:armhf (2.3.1-1) ... Selecting previously unselected package libicu-dev:armhf. Preparing to unpack .../114-libicu-dev_63.1-6+deb10u1_armhf.deb ... Unpacking libicu-dev:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libharfbuzz-dev:armhf. Preparing to unpack .../115-libharfbuzz-dev_2.3.1-1_armhf.deb ... Unpacking libharfbuzz-dev:armhf (2.3.1-1) ... Selecting previously unselected package libxft-dev:armhf. Preparing to unpack .../116-libxft-dev_2.3.2-2_armhf.deb ... Unpacking libxft-dev:armhf (2.3.2-2) ... Selecting previously unselected package pango1.0-tools. Preparing to unpack .../117-pango1.0-tools_1.42.4-8~deb10u1_armhf.deb ... Unpacking pango1.0-tools (1.42.4-8~deb10u1) ... Selecting previously unselected package libpango1.0-dev:armhf. Preparing to unpack .../118-libpango1.0-dev_1.42.4-8~deb10u1_armhf.deb ... Unpacking libpango1.0-dev:armhf (1.42.4-8~deb10u1) ... Selecting previously unselected package libxcomposite1:armhf. Preparing to unpack .../119-libxcomposite1_1%3a0.4.4-2_armhf.deb ... Unpacking libxcomposite1:armhf (1:0.4.4-2) ... Selecting previously unselected package libxfixes3:armhf. Preparing to unpack .../120-libxfixes3_1%3a5.0.3-1_armhf.deb ... Unpacking libxfixes3:armhf (1:5.0.3-1) ... Selecting previously unselected package x11proto-fixes-dev. Preparing to unpack .../121-x11proto-fixes-dev_1%3a2018.4-4_all.deb ... Unpacking x11proto-fixes-dev (1:2018.4-4) ... Selecting previously unselected package libxfixes-dev:armhf. Preparing to unpack .../122-libxfixes-dev_1%3a5.0.3-1_armhf.deb ... Unpacking libxfixes-dev:armhf (1:5.0.3-1) ... Selecting previously unselected package x11proto-composite-dev. Preparing to unpack .../123-x11proto-composite-dev_1%3a2018.4-4_all.deb ... Unpacking x11proto-composite-dev (1:2018.4-4) ... Selecting previously unselected package libxcomposite-dev:armhf. Preparing to unpack .../124-libxcomposite-dev_1%3a0.4.4-2_armhf.deb ... Unpacking libxcomposite-dev:armhf (1:0.4.4-2) ... Setting up libpcrecpp0v5:armhf (2:8.39-12) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libgraphite2-3:armhf (1.3.13-7) ... Setting up libpixman-1-0:armhf (0.36.0-1) ... Setting up lsb-base (10.2019051400) ... Setting up libxau6:armhf (1:1.0.8-1+b2) ... Setting up libpixman-1-dev:armhf (0.36.0-1) ... Setting up mime-support (3.62) ... Setting up libpcre16-3:armhf (2:8.39-12) ... Setting up libdatrie1:armhf (0.2.12-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up x11-common (1:7.7+19) ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults invoke-rc.d: could not determine current runlevel Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up libsepol1-dev:armhf (2.8-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up liblzo2-2:armhf (2.10-0.1) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libffi-dev:armhf (3.2.1-9) ... Setting up libpthread-stubs0-dev:armhf (0.4-1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up xtrans-dev (1.3.5-1) ... Setting up libgraphite2-dev:armhf (1.3.13-7) ... Setting up autotools-dev (20180224.1) ... Setting up libglib2.0-data (2.58.3-2+deb10u2) ... Setting up libexpat1-dev:armhf (2.2.6-2+deb10u1) ... Setting up libx11-data (2:1.6.7-1) ... Setting up uuid-dev:armhf (2.33.1-0.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libfribidi0:armhf (1.0.5-3.1+deb10u1) ... Setting up libpng16-16:armhf (1.6.36-6) ... Setting up libpcre32-3:armhf (2:8.39-12) ... Setting up autopoint (0.19.8.1-9) ... Setting up icu-devtools (63.1-6+deb10u1) ... Setting up pkg-config (0.29-6) ... Setting up fonts-dejavu-core (2.37-1) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libthai-data (0.1.28-2) ... Setting up libgirepository-1.0-1:armhf (1.58.3-2) ... Setting up xorg-sgml-doctools (1:1.11-1) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libicu-dev:armhf (63.1-6+deb10u1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libreadline7:armhf (7.0-5) ... Setting up x11proto-dev (2018.4-4) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libblkid-dev:armhf (2.33.1-0.1) ... Setting up libice6:armhf (2:1.0.9-2) ... Setting up libxdmcp6:armhf (1:1.1.2-3) ... Setting up libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Setting up libxcb1:armhf (1.13.1-2) ... Setting up libxau-dev:armhf (1:1.0.8-1+b2) ... Setting up libice-dev:armhf (2:1.0.9-2) ... Setting up libtool (2.4.6-9) ... Setting up libxcb-render0:armhf (1.13.1-2) ... Setting up libpcre3-dev:armhf (2:8.39-12) ... Setting up libfribidi-dev:armhf (1.0.5-3.1+deb10u1) ... Setting up libpng-dev:armhf (1.6.36-6) ... Setting up libglib2.0-bin (2.58.3-2+deb10u2) ... Setting up m4 (1.4.18-2) ... Setting up libxcb-shm0:armhf (1.13.1-2) ... Setting up libthai0:armhf (0.1.28-2) ... Setting up libxdmcp-dev:armhf (1:1.1.2-3) ... Setting up x11proto-composite-dev (1:2018.4-4) ... Setting up libfreetype6:armhf (2.9.1-3+deb10u1) ... Setting up x11proto-core-dev (2018.4-4) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up ucf (3.0038+nmu1) ... Setting up gir1.2-glib-2.0:armhf (1.58.3-2) ... Setting up autoconf (2.69-11) ... Setting up x11proto-xext-dev (2018.4-4) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libx11-6:armhf (2:1.6.7-1) ... Setting up libharfbuzz0b:armhf (2.3.1-1) ... Setting up x11proto-fixes-dev (1:2018.4-4) ... Setting up libxcomposite1:armhf (1:0.4.4-2) ... Setting up libsm6:armhf (2:1.2.3-1) ... Setting up libmount-dev:armhf (2.33.1-0.1) ... Setting up libpython3-stdlib:armhf (3.7.3-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u1) ... Setting up gettext (0.19.8.1-9) ... Setting up libharfbuzz-icu0:armhf (2.3.1-1) ... Setting up libxcb1-dev:armhf (1.13.1-2) ... Setting up libxrender1:armhf (1:0.9.10-1) ... Setting up libsm-dev:armhf (2:1.2.3-1) ... Setting up libselinux1-dev:armhf (2.8-1+b1) ... Setting up fontconfig-config (2.13.1-2) ... Setting up libx11-dev:armhf (2:1.6.7-1) ... Setting up libxext6:armhf (2:1.3.3-1+b2) ... Setting up python3 (3.7.3-1) ... Setting up libharfbuzz-gobject0:armhf (2.3.1-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up gir1.2-harfbuzz-0.0:armhf (2.3.1-1) ... Setting up libfreetype6-dev:armhf (2.9.1-3+deb10u1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libxcb-shm0-dev:armhf (1.13.1-2) ... Setting up libxfixes3:armhf (1:5.0.3-1) ... Setting up libxcb-render0-dev:armhf (1.13.1-2) ... Setting up libxext-dev:armhf (2:1.3.3-1+b2) ... Setting up libfontconfig1:armhf (2.13.1-2) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up libxrender-dev:armhf (1:0.9.10-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Setting up fontconfig (2.13.1-2) ... Regenerating fonts cache... done. Setting up libxft2:armhf (2.3.2-2) ... Setting up libfontconfig1-dev:armhf (2.13.1-2) ... Setting up po-debconf (1.0.21) ... Setting up libpango-1.0-0:armhf (1.42.4-8~deb10u1) ... Setting up libcairo2:armhf (1.16.0-4) ... Setting up libxfixes-dev:armhf (1:5.0.3-1) ... Setting up libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Setting up libcairo-gobject2:armhf (1.16.0-4) ... Setting up libpangoft2-1.0-0:armhf (1.42.4-8~deb10u1) ... Setting up libpangocairo-1.0-0:armhf (1.42.4-8~deb10u1) ... Setting up libxft-dev:armhf (2.3.2-2) ... Setting up libcairo-script-interpreter2:armhf (1.16.0-4) ... Setting up libharfbuzz-dev:armhf (2.3.1-1) ... Setting up gir1.2-freedesktop:armhf (1.58.3-2) ... Setting up libpangoxft-1.0-0:armhf (1.42.4-8~deb10u1) ... Setting up libxcomposite-dev:armhf (1:0.4.4-2) ... Setting up pango1.0-tools (1.42.4-8~deb10u1) ... Setting up gir1.2-pango-1.0:armhf (1.42.4-8~deb10u1) ... Setting up libcairo2-dev:armhf (1.16.0-4) ... Setting up libpango1.0-dev:armhf (1.42.4-8~deb10u1) ... Setting up dh-autoreconf (19) ... Setting up debhelper (12.1.1) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libaosd-0.2.7/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libaosd dpkg-buildpackage: info: source version 0.2.7-1.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by YunQiang Su dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh: Compatibility levels before 9 are deprecated (level 7 in use) debian/rules override_dh_auto_clean make[1]: Entering directory '/build/libaosd-0.2.7' [ ! -f buildsys.mk ] || dh_auto_clean make[1]: Leaving directory '/build/libaosd-0.2.7' dh_clean dh_clean: Compatibility levels before 9 are deprecated (level 7 in use) debian/rules build dh build dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_update_autotools_config dh_auto_configure dh_auto_configure: Compatibility levels before 9 are deprecated (level 7 in use) ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libexecdir=\${prefix}/lib/libaosd --disable-maintainer-mode --disable-dependency-tracking configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode, --disable-dependency-tracking checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking target system type... arm-unknown-linux-gnueabihf checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking whether ln -s works... yes checking whether make sets $(MAKE)... yes checking for a BSD-compatible install... /usr/bin/install -c checking for library containing strerror... none required checking for ar... /usr/bin/ar checking for shared library system... GNU checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for X11... yes checking for XRENDER... yes checking for CAIRO... yes checking for XCOMPOSITE... yes checking for PANGOCAIRO... yes checking for GLIB... yes configure: touching .deps files configure: creating ./config.status config.status: creating buildsys.mk config.status: creating extra.mk config.status: creating libaosd.pc config.status: creating examples/aosd_cat/aosd_cat.1 config.status: creating libaosd-text.pc config.status: creating config.h configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode, --disable-dependency-tracking Configuration: X Composite yes Pango-Cairo yes Glib-2.0 yes Examples animation scroller image aosd_cat Now type "make" to build, and "make install" to install. Thank you for using libaosd. dh_auto_build dh_auto_build: Compatibility levels before 9 are deprecated (level 7 in use) make -j1 make[1]: Entering directory '/build/libaosd-0.2.7' for i in subdirs depend locales; do \ make -w -j1 $i || exit 1; \ done make[2]: Entering directory '/build/libaosd-0.2.7' for i in libaosd libaosd-text examples; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done Entering directory libaosd. make[3]: Entering directory '/build/libaosd-0.2.7/libaosd' for i in subdirs depend libaosd.so locales; do \ make -w -j1 $i || exit 1; \ done make[4]: Entering directory '/build/libaosd-0.2.7/libaosd' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done make[4]: Leaving directory '/build/libaosd-0.2.7/libaosd' make[4]: Entering directory '/build/libaosd-0.2.7/libaosd' regen=0; \ deps=""; \ test -f .deps || regen=1; \ for i in aosd.c aosd-internal.c aosd-main.c; do \ case $i in \ *.c) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.c}.dep"; \ ;; \ *.cc) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cc}.dep"; \ ;; \ *.cxx) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cxx}.dep"; \ ;; \ *.m) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.m}.dep"; \ ;; \ *.mm) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.mm}.dep"; \ ;; \ *.S) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.S}.dep"; \ ;; \ esac; \ done; \ if test x"$regen" = x"1" -a x"$deps" != "x"; then \ printf "\033[K\033[0;33mGenerating dependencies...\033[0m\r"; \ if make -w -j1 $deps && cat $deps >.deps; then \ rm -f $deps; \ printf "\033[K\033[0;32mSuccessfully generated dependencies.\033[0m\n"; \ else \ :> .deps; \ touch -t 0001010000 .deps; \ printf "\033[K\033[0;31mFailed to generate dependencies!\033[0m\n"; exit 1; \ fi; \ fi Generating dependencies... make[5]: Entering directory '/build/libaosd-0.2.7/libaosd' gcc -E -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -M aosd.c >aosd.dep || (rm -f aosd.dep; exit 1) gcc -E -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -M aosd-internal.c >aosd-internal.dep || (rm -f aosd-internal.dep; exit 1) gcc -E -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -M aosd-main.c >aosd-main.dep || (rm -f aosd-main.dep; exit 1) make[5]: Leaving directory '/build/libaosd-0.2.7/libaosd' Successfully generated dependencies. make[4]: Leaving directory '/build/libaosd-0.2.7/libaosd' make[4]: Entering directory '/build/libaosd-0.2.7/libaosd' printf "\033[K\033[0;33mCompiling \033[1;33maosd.c\033[0;33m (lib)...\033[0m\r" Compiling aosd.c (lib)... if gcc -fPIC -DPIC -g -O2 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -fPIC -DPIC -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -c -o aosd.lib.o aosd.c; then \ printf "\033[K\033[0;32mSuccessfully compiled \033[1;32maosd.c\033[0;32m (lib).\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to compile \033[1;31maosd.c\033[0;31m (lib)!\033[0m\n"; exit 1; \ fi Successfully compiled aosd.c (lib). printf "\033[K\033[0;33mCompiling \033[1;33maosd-internal.c\033[0;33m (lib)...\033[0m\r" Compiling aosd-internal.c (lib)... if gcc -fPIC -DPIC -g -O2 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -fPIC -DPIC -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -c -o aosd-internal.lib.o aosd-internal.c; then \ printf "\033[K\033[0;32mSuccessfully compiled \033[1;32maosd-internal.c\033[0;32m (lib).\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to compile \033[1;31maosd-internal.c\033[0;31m (lib)!\033[0m\n"; exit 1; \ fi Successfully compiled aosd-internal.c (lib). printf "\033[K\033[0;33mCompiling \033[1;33maosd-main.c\033[0;33m (lib)...\033[0m\r" Compiling aosd-main.c (lib)... if gcc -fPIC -DPIC -g -O2 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -fPIC -DPIC -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -c -o aosd-main.lib.o aosd-main.c; then \ printf "\033[K\033[0;32mSuccessfully compiled \033[1;32maosd-main.c\033[0;32m (lib).\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to compile \033[1;31maosd-main.c\033[0;31m (lib)!\033[0m\n"; exit 1; \ fi Successfully compiled aosd-main.c (lib). case libaosd.so in \ *.a) \ make -w -j1 STATIC_LIB=libaosd.so LIB= libaosd.so || exit 1 \ ;; \ *) \ printf "\033[K\033[0;33mLinking \033[1;33mlibaosd.so\033[0;33m...\033[0m\r"; \ if gcc -o libaosd.so aosd.lib.o aosd-internal.lib.o aosd-main.lib.o -shared -Wl,-soname=libaosd.so.2 -lX11 -lXrender -lX11 -lXcomposite -lcairo; then \ printf "\033[K\033[0;32mSuccessfully linked \033[1;32mlibaosd.so\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to link \033[1;31mlibaosd.so\033[0;31m!\033[0m\n"; exit 1; \ fi \ ;; \ esac Linking libaosd.so... Successfully linked libaosd.so. make[4]: Leaving directory '/build/libaosd-0.2.7/libaosd' make[4]: Entering directory '/build/libaosd-0.2.7/libaosd' make[4]: Nothing to be done for 'locales'. make[4]: Leaving directory '/build/libaosd-0.2.7/libaosd' make[3]: Leaving directory '/build/libaosd-0.2.7/libaosd' Leaving directory libaosd. Entering directory libaosd-text. make[3]: Entering directory '/build/libaosd-0.2.7/libaosd-text' for i in subdirs depend libaosd-text.so locales; do \ make -w -j1 $i || exit 1; \ done make[4]: Entering directory '/build/libaosd-0.2.7/libaosd-text' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done make[4]: Leaving directory '/build/libaosd-0.2.7/libaosd-text' make[4]: Entering directory '/build/libaosd-0.2.7/libaosd-text' regen=0; \ deps=""; \ test -f .deps || regen=1; \ for i in aosd-text.c; do \ case $i in \ *.c) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.c}.dep"; \ ;; \ *.cc) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cc}.dep"; \ ;; \ *.cxx) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cxx}.dep"; \ ;; \ *.m) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.m}.dep"; \ ;; \ *.mm) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.mm}.dep"; \ ;; \ *.S) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.S}.dep"; \ ;; \ esac; \ done; \ if test x"$regen" = x"1" -a x"$deps" != "x"; then \ printf "\033[K\033[0;33mGenerating dependencies...\033[0m\r"; \ if make -w -j1 $deps && cat $deps >.deps; then \ rm -f $deps; \ printf "\033[K\033[0;32mSuccessfully generated dependencies.\033[0m\n"; \ else \ :> .deps; \ touch -t 0001010000 .deps; \ printf "\033[K\033[0;31mFailed to generate dependencies!\033[0m\n"; exit 1; \ fi; \ fi Generating dependencies... make[5]: Entering directory '/build/libaosd-0.2.7/libaosd-text' gcc -E -I/usr/include/pango-1.0 -I/usr/include/harfbuzz -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -I../libaosd -M aosd-text.c >aosd-text.dep || (rm -f aosd-text.dep; exit 1) make[5]: Leaving directory '/build/libaosd-0.2.7/libaosd-text' Successfully generated dependencies. make[4]: Leaving directory '/build/libaosd-0.2.7/libaosd-text' make[4]: Entering directory '/build/libaosd-0.2.7/libaosd-text' printf "\033[K\033[0;33mCompiling \033[1;33maosd-text.c\033[0;33m (lib)...\033[0m\r" Compiling aosd-text.c (lib)... if gcc -fPIC -DPIC -g -O2 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -fPIC -DPIC -I/usr/include/pango-1.0 -I/usr/include/harfbuzz -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -I../libaosd -c -o aosd-text.lib.o aosd-text.c; then \ printf "\033[K\033[0;32mSuccessfully compiled \033[1;32maosd-text.c\033[0;32m (lib).\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to compile \033[1;31maosd-text.c\033[0;31m (lib)!\033[0m\n"; exit 1; \ fi aosd-text.c: In function 'pango_layout_new_aosd': aosd-text.c:16:3: warning: 'pango_cairo_font_map_create_context' is deprecated: Use 'pango_font_map_create_context' instead [-Wdeprecated-declarations] return pango_layout_new(pango_cairo_font_map_create_context( ^~~~~~ In file included from aosd-text.h:11, from aosd-text.c:11: /usr/include/pango-1.0/pango/pangocairo.h:101:15: note: declared here PangoContext *pango_cairo_font_map_create_context (PangoCairoFontMap *fontmap); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Successfully compiled aosd-text.c (lib). case libaosd-text.so in \ *.a) \ make -w -j1 STATIC_LIB=libaosd-text.so LIB= libaosd-text.so || exit 1 \ ;; \ *) \ printf "\033[K\033[0;33mLinking \033[1;33mlibaosd-text.so\033[0;33m...\033[0m\r"; \ if gcc -o libaosd-text.so aosd-text.lib.o -shared -Wl,-soname=libaosd-text.so.2 -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lcairo -L../libaosd -laosd; then \ printf "\033[K\033[0;32mSuccessfully linked \033[1;32mlibaosd-text.so\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to link \033[1;31mlibaosd-text.so\033[0;31m!\033[0m\n"; exit 1; \ fi \ ;; \ esac Linking libaosd-text.so... Successfully linked libaosd-text.so. make[4]: Leaving directory '/build/libaosd-0.2.7/libaosd-text' make[4]: Entering directory '/build/libaosd-0.2.7/libaosd-text' make[4]: Nothing to be done for 'locales'. make[4]: Leaving directory '/build/libaosd-0.2.7/libaosd-text' make[3]: Leaving directory '/build/libaosd-0.2.7/libaosd-text' Leaving directory libaosd-text. Entering directory examples. make[3]: Entering directory '/build/libaosd-0.2.7/examples' for i in subdirs depend locales; do \ make -w -j1 $i || exit 1; \ done make[4]: Entering directory '/build/libaosd-0.2.7/examples' for i in animation scroller image aosd_cat; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done Entering directory animation. make[5]: Entering directory '/build/libaosd-0.2.7/examples/animation' for i in subdirs depend animation locales; do \ make -w -j1 $i || exit 1; \ done make[6]: Entering directory '/build/libaosd-0.2.7/examples/animation' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done make[6]: Leaving directory '/build/libaosd-0.2.7/examples/animation' make[6]: Entering directory '/build/libaosd-0.2.7/examples/animation' regen=0; \ deps=""; \ test -f .deps || regen=1; \ for i in animation.c; do \ case $i in \ *.c) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.c}.dep"; \ ;; \ *.cc) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cc}.dep"; \ ;; \ *.cxx) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cxx}.dep"; \ ;; \ *.m) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.m}.dep"; \ ;; \ *.mm) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.mm}.dep"; \ ;; \ *.S) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.S}.dep"; \ ;; \ esac; \ done; \ if test x"$regen" = x"1" -a x"$deps" != "x"; then \ printf "\033[K\033[0;33mGenerating dependencies...\033[0m\r"; \ if make -w -j1 $deps && cat $deps >.deps; then \ rm -f $deps; \ printf "\033[K\033[0;32mSuccessfully generated dependencies.\033[0m\n"; \ else \ :> .deps; \ touch -t 0001010000 .deps; \ printf "\033[K\033[0;31mFailed to generate dependencies!\033[0m\n"; exit 1; \ fi; \ fi Generating dependencies... make[7]: Entering directory '/build/libaosd-0.2.7/examples/animation' gcc -E -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I../.. -I../../libaosd -M animation.c >animation.dep || (rm -f animation.dep; exit 1) make[7]: Leaving directory '/build/libaosd-0.2.7/examples/animation' Successfully generated dependencies. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/animation' make[6]: Entering directory '/build/libaosd-0.2.7/examples/animation' printf "\033[K\033[0;33mCompiling \033[1;33manimation.c\033[0;33m...\033[0m\r" Compiling animation.c... if gcc -g -O2 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I../.. -I../../libaosd -c -o animation.o animation.c; then \ printf "\033[K\033[0;32mSuccessfully compiled \033[1;32manimation.c\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to compile \033[1;31manimation.c\033[0;31m!\033[0m\n"; exit 1; \ fi Successfully compiled animation.c. printf "\033[K\033[0;33mLinking \033[1;33manimation\033[0;33m...\033[0m\r" Linking animation... if gcc -o animation animation.o -lcairo -L../../libaosd -laosd ; then \ printf "\033[K\033[0;32mSuccessfully linked \033[1;32manimation\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to link \033[1;31manimation\033[0;31m!\033[0m\n"; exit 1; \ fi Successfully linked animation. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/animation' make[6]: Entering directory '/build/libaosd-0.2.7/examples/animation' make[6]: Nothing to be done for 'locales'. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/animation' make[5]: Leaving directory '/build/libaosd-0.2.7/examples/animation' Leaving directory animation. Entering directory scroller. make[5]: Entering directory '/build/libaosd-0.2.7/examples/scroller' for i in subdirs depend scroller locales; do \ make -w -j1 $i || exit 1; \ done make[6]: Entering directory '/build/libaosd-0.2.7/examples/scroller' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done make[6]: Leaving directory '/build/libaosd-0.2.7/examples/scroller' make[6]: Entering directory '/build/libaosd-0.2.7/examples/scroller' regen=0; \ deps=""; \ test -f .deps || regen=1; \ for i in scroller.c; do \ case $i in \ *.c) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.c}.dep"; \ ;; \ *.cc) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cc}.dep"; \ ;; \ *.cxx) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cxx}.dep"; \ ;; \ *.m) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.m}.dep"; \ ;; \ *.mm) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.mm}.dep"; \ ;; \ *.S) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.S}.dep"; \ ;; \ esac; \ done; \ if test x"$regen" = x"1" -a x"$deps" != "x"; then \ printf "\033[K\033[0;33mGenerating dependencies...\033[0m\r"; \ if make -w -j1 $deps && cat $deps >.deps; then \ rm -f $deps; \ printf "\033[K\033[0;32mSuccessfully generated dependencies.\033[0m\n"; \ else \ :> .deps; \ touch -t 0001010000 .deps; \ printf "\033[K\033[0;31mFailed to generate dependencies!\033[0m\n"; exit 1; \ fi; \ fi Generating dependencies... make[7]: Entering directory '/build/libaosd-0.2.7/examples/scroller' gcc -E -I/usr/include/pango-1.0 -I/usr/include/harfbuzz -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I../../ -I../../libaosd -I../../libaosd-text -M scroller.c >scroller.dep || (rm -f scroller.dep; exit 1) make[7]: Leaving directory '/build/libaosd-0.2.7/examples/scroller' Successfully generated dependencies. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/scroller' make[6]: Entering directory '/build/libaosd-0.2.7/examples/scroller' printf "\033[K\033[0;33mCompiling \033[1;33mscroller.c\033[0;33m...\033[0m\r" Compiling scroller.c... if gcc -g -O2 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -I/usr/include/pango-1.0 -I/usr/include/harfbuzz -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I../../ -I../../libaosd -I../../libaosd-text -c -o scroller.o scroller.c; then \ printf "\033[K\033[0;32mSuccessfully compiled \033[1;32mscroller.c\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to compile \033[1;31mscroller.c\033[0;31m!\033[0m\n"; exit 1; \ fi scroller.c: In function 'main': scroller.c:99:3: warning: 'g_type_init' is deprecated [-Wdeprecated-declarations] g_type_init(); ^~~~~~~~~~~ In file included from /usr/include/glib-2.0/gobject/gobject.h:24, from /usr/include/glib-2.0/gobject/gbinding.h:29, from /usr/include/glib-2.0/glib-object.h:23, from /usr/include/pango-1.0/pango/pango-types.h:26, from /usr/include/pango-1.0/pango/pango-font.h:26, from /usr/include/pango-1.0/pango/pango-attributes.h:25, from /usr/include/pango-1.0/pango/pango.h:25, from /usr/include/pango-1.0/pango/pangocairo.h:25, from ../../libaosd-text/aosd-text.h:11, from scroller.c:8: /usr/include/glib-2.0/gobject/gtype.h:688:23: note: declared here void g_type_init (void); ^~~~~~~~~~~ Successfully compiled scroller.c. printf "\033[K\033[0;33mLinking \033[1;33mscroller\033[0;33m...\033[0m\r" Linking scroller... if gcc -o scroller scroller.o -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lcairo -L../../libaosd -laosd -L../../libaosd-text -laosd-text ; then \ printf "\033[K\033[0;32mSuccessfully linked \033[1;32mscroller\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to link \033[1;31mscroller\033[0;31m!\033[0m\n"; exit 1; \ fi Successfully linked scroller. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/scroller' make[6]: Entering directory '/build/libaosd-0.2.7/examples/scroller' make[6]: Nothing to be done for 'locales'. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/scroller' make[5]: Leaving directory '/build/libaosd-0.2.7/examples/scroller' Leaving directory scroller. Entering directory image. make[5]: Entering directory '/build/libaosd-0.2.7/examples/image' for i in subdirs depend image locales; do \ make -w -j1 $i || exit 1; \ done make[6]: Entering directory '/build/libaosd-0.2.7/examples/image' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done make[6]: Leaving directory '/build/libaosd-0.2.7/examples/image' make[6]: Entering directory '/build/libaosd-0.2.7/examples/image' regen=0; \ deps=""; \ test -f .deps || regen=1; \ for i in image.c; do \ case $i in \ *.c) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.c}.dep"; \ ;; \ *.cc) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cc}.dep"; \ ;; \ *.cxx) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cxx}.dep"; \ ;; \ *.m) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.m}.dep"; \ ;; \ *.mm) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.mm}.dep"; \ ;; \ *.S) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.S}.dep"; \ ;; \ esac; \ done; \ if test x"$regen" = x"1" -a x"$deps" != "x"; then \ printf "\033[K\033[0;33mGenerating dependencies...\033[0m\r"; \ if make -w -j1 $deps && cat $deps >.deps; then \ rm -f $deps; \ printf "\033[K\033[0;32mSuccessfully generated dependencies.\033[0m\n"; \ else \ :> .deps; \ touch -t 0001010000 .deps; \ printf "\033[K\033[0;31mFailed to generate dependencies!\033[0m\n"; exit 1; \ fi; \ fi Generating dependencies... make[7]: Entering directory '/build/libaosd-0.2.7/examples/image' gcc -E -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I../../ -I../../libaosd -M image.c >image.dep || (rm -f image.dep; exit 1) make[7]: Leaving directory '/build/libaosd-0.2.7/examples/image' Successfully generated dependencies. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/image' make[6]: Entering directory '/build/libaosd-0.2.7/examples/image' printf "\033[K\033[0;33mCompiling \033[1;33mimage.c\033[0;33m...\033[0m\r" Compiling image.c... if gcc -g -O2 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I../../ -I../../libaosd -c -o image.o image.c; then \ printf "\033[K\033[0;32mSuccessfully compiled \033[1;32mimage.c\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to compile \033[1;31mimage.c\033[0;31m!\033[0m\n"; exit 1; \ fi Successfully compiled image.c. printf "\033[K\033[0;33mLinking \033[1;33mimage\033[0;33m...\033[0m\r" Linking image... if gcc -o image image.o -lcairo -lglib-2.0 -L../../libaosd -laosd ; then \ printf "\033[K\033[0;32mSuccessfully linked \033[1;32mimage\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to link \033[1;31mimage\033[0;31m!\033[0m\n"; exit 1; \ fi Successfully linked image. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/image' make[6]: Entering directory '/build/libaosd-0.2.7/examples/image' make[6]: Nothing to be done for 'locales'. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/image' make[5]: Leaving directory '/build/libaosd-0.2.7/examples/image' Leaving directory image. Entering directory aosd_cat. make[5]: Entering directory '/build/libaosd-0.2.7/examples/aosd_cat' for i in subdirs depend aosd_cat locales; do \ make -w -j1 $i || exit 1; \ done make[6]: Entering directory '/build/libaosd-0.2.7/examples/aosd_cat' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done make[6]: Leaving directory '/build/libaosd-0.2.7/examples/aosd_cat' make[6]: Entering directory '/build/libaosd-0.2.7/examples/aosd_cat' regen=0; \ deps=""; \ test -f .deps || regen=1; \ for i in aosd_cat.c; do \ case $i in \ *.c) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.c}.dep"; \ ;; \ *.cc) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cc}.dep"; \ ;; \ *.cxx) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cxx}.dep"; \ ;; \ *.m) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.m}.dep"; \ ;; \ *.mm) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.mm}.dep"; \ ;; \ *.S) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.S}.dep"; \ ;; \ esac; \ done; \ if test x"$regen" = x"1" -a x"$deps" != "x"; then \ printf "\033[K\033[0;33mGenerating dependencies...\033[0m\r"; \ if make -w -j1 $deps && cat $deps >.deps; then \ rm -f $deps; \ printf "\033[K\033[0;32mSuccessfully generated dependencies.\033[0m\n"; \ else \ :> .deps; \ touch -t 0001010000 .deps; \ printf "\033[K\033[0;31mFailed to generate dependencies!\033[0m\n"; exit 1; \ fi; \ fi Generating dependencies... make[7]: Entering directory '/build/libaosd-0.2.7/examples/aosd_cat' gcc -E -I/usr/include/pango-1.0 -I/usr/include/harfbuzz -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I../../ -I../../libaosd -I../../libaosd-text -M aosd_cat.c >aosd_cat.dep || (rm -f aosd_cat.dep; exit 1) make[7]: Leaving directory '/build/libaosd-0.2.7/examples/aosd_cat' Successfully generated dependencies. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/aosd_cat' make[6]: Entering directory '/build/libaosd-0.2.7/examples/aosd_cat' printf "\033[K\033[0;33mCompiling \033[1;33maosd_cat.c\033[0;33m...\033[0m\r" Compiling aosd_cat.c... if gcc -g -O2 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -I/usr/include/pango-1.0 -I/usr/include/harfbuzz -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I../../ -I../../libaosd -I../../libaosd-text -c -o aosd_cat.o aosd_cat.c; then \ printf "\033[K\033[0;32mSuccessfully compiled \033[1;32maosd_cat.c\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to compile \033[1;31maosd_cat.c\033[0;31m!\033[0m\n"; exit 1; \ fi In file included from aosd_cat.c:14: aosd_cat.c: In function 'verify_vals': aosd_cat.h:17:3: warning: macro expands to multiple statements [-Wmultistatement-macros] __ret = (expr); \ ^~~~~ aosd_cat.c:222:5: note: in expansion of macro 'CATCH' CATCH((data.input = fopen(config.input, "r")) != NULL, ^~~~~ aosd_cat.c:221:3: note: some parts of macro expansion are not guarded by this 'else' clause else ^~~~ aosd_cat.c: In function 'main': aosd_cat.c:401:3: warning: 'g_type_init' is deprecated [-Wdeprecated-declarations] g_type_init(); ^~~~~~~~~~~ In file included from /usr/include/glib-2.0/gobject/gobject.h:24, from /usr/include/glib-2.0/gobject/gbinding.h:29, from /usr/include/glib-2.0/glib-object.h:23, from /usr/include/pango-1.0/pango/pango-types.h:26, from /usr/include/pango-1.0/pango/pango-font.h:26, from /usr/include/pango-1.0/pango/pango-attributes.h:25, from /usr/include/pango-1.0/pango/pango.h:25, from /usr/include/pango-1.0/pango/pangocairo.h:25, from ../../libaosd-text/aosd-text.h:11, from aosd_cat.c:11: /usr/include/glib-2.0/gobject/gtype.h:688:23: note: declared here void g_type_init (void); ^~~~~~~~~~~ Successfully compiled aosd_cat.c. printf "\033[K\033[0;33mLinking \033[1;33maosd_cat\033[0;33m...\033[0m\r" Linking aosd_cat... if gcc -o aosd_cat aosd_cat.o -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lcairo -lglib-2.0 -L../../libaosd -laosd -L../../libaosd-text -laosd-text ; then \ printf "\033[K\033[0;32mSuccessfully linked \033[1;32maosd_cat\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to link \033[1;31maosd_cat\033[0;31m!\033[0m\n"; exit 1; \ fi Successfully linked aosd_cat. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/aosd_cat' make[6]: Entering directory '/build/libaosd-0.2.7/examples/aosd_cat' make[6]: Nothing to be done for 'locales'. make[6]: Leaving directory '/build/libaosd-0.2.7/examples/aosd_cat' make[5]: Leaving directory '/build/libaosd-0.2.7/examples/aosd_cat' Leaving directory aosd_cat. make[4]: Leaving directory '/build/libaosd-0.2.7/examples' make[4]: Entering directory '/build/libaosd-0.2.7/examples' regen=0; \ deps=""; \ test -f .deps || regen=1; \ for i in ; do \ case $i in \ *.c) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.c}.dep"; \ ;; \ *.cc) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cc}.dep"; \ ;; \ *.cxx) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cxx}.dep"; \ ;; \ *.m) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.m}.dep"; \ ;; \ *.mm) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.mm}.dep"; \ ;; \ *.S) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.S}.dep"; \ ;; \ esac; \ done; \ if test x"$regen" = x"1" -a x"$deps" != "x"; then \ printf "\033[K\033[0;33mGenerating dependencies...\033[0m\r"; \ if make -w -j1 $deps && cat $deps >.deps; then \ rm -f $deps; \ printf "\033[K\033[0;32mSuccessfully generated dependencies.\033[0m\n"; \ else \ :> .deps; \ touch -t 0001010000 .deps; \ printf "\033[K\033[0;31mFailed to generate dependencies!\033[0m\n"; exit 1; \ fi; \ fi make[4]: Leaving directory '/build/libaosd-0.2.7/examples' make[4]: Entering directory '/build/libaosd-0.2.7/examples' make[4]: Nothing to be done for 'locales'. make[4]: Leaving directory '/build/libaosd-0.2.7/examples' make[3]: Leaving directory '/build/libaosd-0.2.7/examples' Leaving directory examples. make[2]: Leaving directory '/build/libaosd-0.2.7' make[2]: Entering directory '/build/libaosd-0.2.7' regen=0; \ deps=""; \ test -f .deps || regen=1; \ for i in ; do \ case $i in \ *.c) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.c}.dep"; \ ;; \ *.cc) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cc}.dep"; \ ;; \ *.cxx) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.cxx}.dep"; \ ;; \ *.m) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.m}.dep"; \ ;; \ *.mm) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.mm}.dep"; \ ;; \ *.S) \ test $i -nt .deps && regen=1; \ deps="$deps ${i%.S}.dep"; \ ;; \ esac; \ done; \ if test x"$regen" = x"1" -a x"$deps" != "x"; then \ printf "\033[K\033[0;33mGenerating dependencies...\033[0m\r"; \ if make -w -j1 $deps && cat $deps >.deps; then \ rm -f $deps; \ printf "\033[K\033[0;32mSuccessfully generated dependencies.\033[0m\n"; \ else \ :> .deps; \ touch -t 0001010000 .deps; \ printf "\033[K\033[0;31mFailed to generate dependencies!\033[0m\n"; exit 1; \ fi; \ fi make[2]: Leaving directory '/build/libaosd-0.2.7' make[2]: Entering directory '/build/libaosd-0.2.7' make[2]: Nothing to be done for 'locales'. make[2]: Leaving directory '/build/libaosd-0.2.7' make[1]: Leaving directory '/build/libaosd-0.2.7' dh_auto_test dh_auto_test: Compatibility levels before 9 are deprecated (level 7 in use) fakeroot debian/rules binary dh binary dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_testroot dh_prep dh_auto_install dh_auto_install: Compatibility levels before 9 are deprecated (level 7 in use) make -j1 install DESTDIR=/build/libaosd-0.2.7/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/libaosd-0.2.7' for i in libaosd.pc libaosd-text.pc; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib/pkgconfig && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/pkgconfig/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done Installing libaosd.pc... Successfully installed libaosd.pc. Installing libaosd-text.pc... Successfully installed libaosd-text.pc. for i in libaosd libaosd-text examples; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 install || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done Entering directory libaosd. make[2]: Entering directory '/build/libaosd-0.2.7/libaosd' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 install || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done for i in libaosd.so; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i.2.0.0 && ln -s -f $i.2.0.0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i.2 && ln -s -f $i.2.0.0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done Installing libaosd.so... Successfully installed libaosd.so. for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p $(dirname /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i) && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/bin && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/bin/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in aosd.h; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done Installing aosd.h... Successfully installed aosd.h. for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES/libaosd.mo; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1 && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done make[2]: Leaving directory '/build/libaosd-0.2.7/libaosd' Leaving directory libaosd. Entering directory libaosd-text. make[2]: Entering directory '/build/libaosd-0.2.7/libaosd-text' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 install || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done for i in libaosd-text.so; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i.2.0.0 && ln -s -f $i.2.0.0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i.2 && ln -s -f $i.2.0.0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done Installing libaosd-text.so... Successfully installed libaosd-text.so. for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p $(dirname /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i) && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/bin && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/bin/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in aosd-text.h; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done Installing aosd-text.h... Successfully installed aosd-text.h. for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES/libaosd.mo; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1 && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done make[2]: Leaving directory '/build/libaosd-0.2.7/libaosd-text' Leaving directory libaosd-text. Entering directory examples. make[2]: Entering directory '/build/libaosd-0.2.7/examples' for i in animation scroller image aosd_cat; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 install || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done Entering directory animation. make[3]: Entering directory '/build/libaosd-0.2.7/examples/animation' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 install || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i...0 && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i. && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p $(dirname /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i) && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/bin && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/bin/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES/libaosd.mo; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1 && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done make[3]: Leaving directory '/build/libaosd-0.2.7/examples/animation' Leaving directory animation. Entering directory scroller. make[3]: Entering directory '/build/libaosd-0.2.7/examples/scroller' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 install || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i...0 && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i. && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p $(dirname /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i) && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/bin && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/bin/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES/libaosd.mo; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1 && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done make[3]: Leaving directory '/build/libaosd-0.2.7/examples/scroller' Leaving directory scroller. Entering directory image. make[3]: Entering directory '/build/libaosd-0.2.7/examples/image' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 install || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i...0 && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i. && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p $(dirname /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i) && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/bin && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/bin/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES/libaosd.mo; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1 && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done make[3]: Leaving directory '/build/libaosd-0.2.7/examples/image' Leaving directory image. Entering directory aosd_cat. make[3]: Entering directory '/build/libaosd-0.2.7/examples/aosd_cat' for i in ; do \ printf "\033[K\033[0;36mEntering directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd $i || exit 1; \ make -w -j1 install || exit 1; \ printf "\033[K\033[0;36mLeaving directory \033[1;36m$i\033[0;36m.\033[0m\n"; cd .. || exit 1; \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i...0 && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i. && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p $(dirname /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i) && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in aosd_cat; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/bin && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/bin/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done Installing aosd_cat... Successfully installed aosd_cat. for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES/libaosd.mo; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in aosd_cat.1; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1 && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done Installing aosd_cat.1... Successfully installed aosd_cat.1. make[3]: Leaving directory '/build/libaosd-0.2.7/examples/aosd_cat' Leaving directory aosd_cat. for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i...0 && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i. && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p $(dirname /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i) && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/bin && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/bin/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES/libaosd.mo; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1 && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done make[2]: Leaving directory '/build/libaosd-0.2.7/examples' Leaving directory examples. for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i...0 && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i. && ln -s -f $i...0 /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/lib/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p $(dirname /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i) && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/bin && /usr/bin/install -c -m 755 $i /build/libaosd-0.2.7/debian/tmp/usr/bin/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/include/libaosd/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/locale/${i%.mo}/LC_MESSAGES/libaosd.mo; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done for i in ; do \ printf "\033[K\033[0;33mInstalling \033[1;33m$i\033[0;33m...\033[0m\r"; \ if mkdir -p /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1 && /usr/bin/install -c -m 644 $i /build/libaosd-0.2.7/debian/tmp/usr/share/man/man1/$i; then \ printf "\033[K\033[0;32mSuccessfully installed \033[1;32m$i\033[0;32m.\033[0m\n"; \ else \ printf "\033[K\033[0;31mFailed to install \033[1;31m$i\033[0;31m!\033[0m\n"; exit 1; \ fi \ done make[1]: Leaving directory '/build/libaosd-0.2.7' dh_install dh_install: Compatibility levels before 9 are deprecated (level 7 in use) dh_installdocs dh_installdocs: Compatibility levels before 9 are deprecated (level 7 in use) dh_installchangelogs dh_installchangelogs: Compatibility levels before 9 are deprecated (level 7 in use) dh_installman dh_installman: Compatibility levels before 9 are deprecated (level 7 in use) dh_perl dh_link dh_strip_nondeterminism dh_compress dh_compress: Compatibility levels before 9 are deprecated (level 7 in use) dh_compress: Compatibility levels before 9 are deprecated (level 7 in use) dh_fixperms dh_missing dh_missing: Compatibility levels before 9 are deprecated (level 7 in use) dh_strip dh_strip: Compatibility levels before 9 are deprecated (level 7 in use) dh_strip: Compatibility levels before 9 are deprecated (level 7 in use) dh_makeshlibs dh_makeshlibs: Compatibility levels before 9 are deprecated (level 7 in use) dh_shlibdeps dh_shlibdeps: Compatibility levels before 9 are deprecated (level 7 in use) dh_shlibdeps: Compatibility levels before 9 are deprecated (level 7 in use) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/aosd-cat/usr/bin/aosd_cat was not linked against libcairo.so.2 (it uses none of the library's symbols) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/aosd-cat/usr/bin/aosd_cat was not linked against libpangocairo-1.0.so.0 (it uses none of the library's symbols) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libaosd-text2/usr/lib/libaosd-text.so.2.0.0 was not linked against libglib-2.0.so.0 (it uses none of the library's symbols) dh_installdeb dh_installdeb: Compatibility levels before 9 are deprecated (level 7 in use) dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libaosd2' in '../libaosd2_0.2.7-1.1_armhf.deb'. dpkg-deb: building package 'libaosd-text2-dbgsym' in '../libaosd-text2-dbgsym_0.2.7-1.1_armhf.deb'. dpkg-deb: building package 'aosd-cat' in '../aosd-cat_0.2.7-1.1_armhf.deb'. dpkg-deb: building package 'aosd-cat-dbgsym' in '../aosd-cat-dbgsym_0.2.7-1.1_armhf.deb'. dpkg-deb: building package 'libaosd2-dbgsym' in '../libaosd2-dbgsym_0.2.7-1.1_armhf.deb'. dpkg-deb: building package 'libaosd-dev' in '../libaosd-dev_0.2.7-1.1_armhf.deb'. dpkg-deb: building package 'libaosd-text2' in '../libaosd-text2_0.2.7-1.1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libaosd_0.2.7-1.1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1596 and its subdirectories I: Current time: Sun Jul 5 09:29:43 -12 2020 I: pbuilder-time-stamp: 1593984583 Sun Jul 5 21:29:59 UTC 2020 I: 1st build successful. Starting 2nd build on remote node ff4a-armhf-rb.debian.net. Sun Jul 5 21:29:59 UTC 2020 I: Preparing to do remote build '2' on ff4a-armhf-rb.debian.net. Sun Jul 5 21:36:42 UTC 2020 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. Sun Jul 5 21:36:44 UTC 2020 I: libaosd_0.2.7-1.1_armhf.changes: Format: 1.8 Date: Thu, 23 Oct 2014 22:23:02 +0800 Source: libaosd Binary: aosd-cat aosd-cat-dbgsym libaosd-dev libaosd-text2 libaosd-text2-dbgsym libaosd2 libaosd2-dbgsym Architecture: armhf Version: 0.2.7-1.1 Distribution: unstable Urgency: low Maintainer: Eugene Paskevich Changed-By: YunQiang Su Description: aosd-cat - an on screen display tool which uses libaosd libaosd-dev - atheme.org's on screen display library - dev libaosd-text2 - atheme.org's on screen display library - text layout libaosd2 - atheme.org's on screen display library - main Closes: 724145 Changes: libaosd (0.2.7-1.1) unstable; urgency=low . * Non-maintainer upload. . [Michael Ablassmeier] * Add override_dh_auto_clean to only run dh_auto_clean if buildsys.mk already exists, fixes FTBFS. (Closes: #724145) Checksums-Sha1: ac1793c1f8b5cdda96a96c723000969a00bbdb5a 15744 aosd-cat-dbgsym_0.2.7-1.1_armhf.deb 0cc0b7b6118097513634db665a0d1580d6c807db 11776 aosd-cat_0.2.7-1.1_armhf.deb e0379c48d9d67ea9ae3e13578b30104a2a3f638a 5804 libaosd-dev_0.2.7-1.1_armhf.deb ca96d38b0d619bae3343373165c85b9b757b5594 11992 libaosd-text2-dbgsym_0.2.7-1.1_armhf.deb 85741de3f0ca89fe4c059eded45ff8488da3e1bb 7060 libaosd-text2_0.2.7-1.1_armhf.deb 2b054f4d1f6574acdd3238dd0661b813f1a0b998 22536 libaosd2-dbgsym_0.2.7-1.1_armhf.deb ccd6af33aa55dab15aac18e5aa840dc337f48bfd 9120 libaosd2_0.2.7-1.1_armhf.deb a4b95b0167df0fa9ff968bd3b193dd1c43e74f0d 9302 libaosd_0.2.7-1.1_armhf.buildinfo Checksums-Sha256: 6b0c059b4187a79509f868961acd58f6cdf8c694b1e72e8b1452e06c890943da 15744 aosd-cat-dbgsym_0.2.7-1.1_armhf.deb 85849e0eceb4fe7d64865224bf204e463a02cd68c12da7c4f6e07749aba378d5 11776 aosd-cat_0.2.7-1.1_armhf.deb 62c4e9bac3baec5f0f8c353ea6240ba652916c2eebbcf6bf4f50d9cb88abd450 5804 libaosd-dev_0.2.7-1.1_armhf.deb cd1a12e3f6bbea2194d50aa6064af9a2f52282f81e70e48fee0e2f1938d0cde8 11992 libaosd-text2-dbgsym_0.2.7-1.1_armhf.deb 5b3bff7834dc7cd6d2eb4025faab34447838c6b8f7fbd5f34922c2d0e12bad8b 7060 libaosd-text2_0.2.7-1.1_armhf.deb 71e5063130c91bd0d17a9d670152499a43dde5cd5b585fc7bdb3b2da03e76b5f 22536 libaosd2-dbgsym_0.2.7-1.1_armhf.deb f6d824083c3d4bc9be196ae3057ccaa6ebe0aa9ff76c302c6964a5937c0e407a 9120 libaosd2_0.2.7-1.1_armhf.deb 0d07967f227d51d4b8593f0f7ef534f6e8fcbe22a783aac2d0512b3e3497d98c 9302 libaosd_0.2.7-1.1_armhf.buildinfo Files: b16cf9b87d216126d7c0748a8e193c16 15744 debug optional aosd-cat-dbgsym_0.2.7-1.1_armhf.deb f741281212a2d69561dd6095ed0d8a7d 11776 x11 optional aosd-cat_0.2.7-1.1_armhf.deb bd2b76c0a34ce6ce4014fa811b246a60 5804 libdevel optional libaosd-dev_0.2.7-1.1_armhf.deb b22cca0924d0789aaa02881913b956b7 11992 debug optional libaosd-text2-dbgsym_0.2.7-1.1_armhf.deb d4bb8dc45a5332da0a86128a0a3c745d 7060 libs optional libaosd-text2_0.2.7-1.1_armhf.deb c773acf1b219a1caefdc36511722f8c2 22536 debug optional libaosd2-dbgsym_0.2.7-1.1_armhf.deb 4ae8758c50cf521c6f7617ea45ef5f13 9120 libs optional libaosd2_0.2.7-1.1_armhf.deb 470cb52ab53e8c0c0e200b5173b584cb 9302 libs optional libaosd_0.2.7-1.1_armhf.buildinfo Sun Jul 5 21:36:46 UTC 2020 I: diffoscope 150 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.EmYQDd1SAc/libaosd_0.2.7-1.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.EmYQDd1SAc/libaosd_0.2.7-1.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.EmYQDd1SAc/libaosd_0.2.7-1.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.EmYQDd1SAc/b1/libaosd_0.2.7-1.1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.EmYQDd1SAc/b2/libaosd_0.2.7-1.1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.252s) 0.252s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.035s) 0.035s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sun Jul 5 21:36:49 UTC 2020 I: diffoscope 150 found no differences in the changes files, and a .buildinfo file also exists. Sun Jul 5 21:36:49 UTC 2020 I: libaosd from buster built successfully and reproducibly on armhf. Sun Jul 5 21:36:50 UTC 2020 I: Submitting .buildinfo files to external archives: Sun Jul 5 21:36:50 UTC 2020 I: Submitting 12K b1/libaosd_0.2.7-1.1_armhf.buildinfo.asc Sun Jul 5 21:36:52 UTC 2020 I: Submitting 12K b2/libaosd_0.2.7-1.1_armhf.buildinfo.asc Sun Jul 5 21:36:52 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Jul 5 21:36:52 UTC 2020 I: Done submitting .buildinfo files. Sun Jul 5 21:36:52 UTC 2020 I: Removing signed libaosd_0.2.7-1.1_armhf.buildinfo.asc files: removed './b1/libaosd_0.2.7-1.1_armhf.buildinfo.asc' removed './b2/libaosd_0.2.7-1.1_armhf.buildinfo.asc'