Sat Aug 1 18:01:27 UTC 2020 I: starting to build jigdo/buster/armhf on jenkins on '2020-08-01 18:01' Sat Aug 1 18:01:27 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_46/8091/console.log Sat Aug 1 18:01:27 UTC 2020 I: Downloading source for buster/jigdo=0.7.3-5+deb10u1 --2020-08-01 18:01:28-- http://deb.debian.org/debian/pool/main/j/jigdo/jigdo_0.7.3-5+deb10u1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1765 (1.7K) Saving to: ‘jigdo_0.7.3-5+deb10u1.dsc’ 0K . 100% 61.7M=0s 2020-08-01 18:01:28 (61.7 MB/s) - ‘jigdo_0.7.3-5+deb10u1.dsc’ saved [1765/1765] Sat Aug 1 18:01:28 UTC 2020 I: jigdo_0.7.3-5+deb10u1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: jigdo Binary: jigdo-file Architecture: any Version: 0.7.3-5+deb10u1 Maintainer: Steve McIntyre <93sam@debian.org> Standards-Version: 4.1.1 Build-Depends: debhelper (>= 9), zlib1g-dev, libbz2-dev, libdb-dev (>= 4.8), libglib2.0-dev Package-List: jigdo-file deb utils optional arch=any Checksums-Sha1: 77e9df0f6ca3612252a1cf55a2d1f8b3e2150d97 759157 jigdo_0.7.3.orig.tar.gz 1794fd953fd66fb3e81202c70e9c9f1a3d64e6b3 27080 jigdo_0.7.3-5+deb10u1.debian.tar.xz Checksums-Sha256: bb0705edf3d356e0c394747267a5caa518193d34dab9a09c40f837b0fefb78e3 759157 jigdo_0.7.3.orig.tar.gz 31ca578e1db997f6752e4b085f7f9bee638872183eca968cf15116bb7398c266 27080 jigdo_0.7.3-5+deb10u1.debian.tar.xz Files: c8debeb3c24e7ef2cecaec637eadf9f1 759157 jigdo_0.7.3.orig.tar.gz eb4e094bbea1bcec05cc7556962ce031 27080 jigdo_0.7.3-5+deb10u1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJFBAEBCAAvFiEEzrtSMB1hfpEDkP4WWHl5VzRCaE4FAl7p3OYRHDkzc2FtQGRl Ymlhbi5vcmcACgkQWHl5VzRCaE4dRg/7B7RX6MDUySBT6ShNiA5LXiwK/esFvtfA Lpeqb60X/Pzk0vwrXsLaaCTEnSF3mya1TtfYDf3WFSyqq/Y2i3xSe1TPP7zy6LVC CDZ58btNlSceOGI0oYfGe+pTOBkVCrTFqog/yXFqGA1Qn0jMf39PxysU9ytPE15l R6kvIDg9DcUvGN7ELUAPognnRKNoBnfAJbchkNzFtcgz+WiHMfJIREKqp//9K9Xr +ruoAep7lUWwFT89uFfq+9+YEZ7AyvGlFac+kgj5JqO0jNfZqMGwwWeLoaG7hK+u pIXR3PaPOR1CznWX7NYOO5By6UrPNc6VRoF+xoUXtf1JBj/wxhfUBiy6uCVAtbTS okiMOb65/JZ76OG4xDQ6rF/ZWIJ4qcGPUF/daC7FOaBm8pHmh1y2XI4QLzWoTemj edQc30TaHHzVgK7fa8V35kqaPgTRocFrDoNvXTaw7KHY+SKUbPqEmBTSM7d5WVpO 04BMvfSgH21sge85bUf188t6mWL604c2GULBfeRgTg2wzdzOIzYjvogzKRuRZVyS LDrZqJUDhAIUwF0dlYRSQKtgx1MnU5va3U5inWRkVe8GKpmZLzA7AVFYEqBYOxsd QyhRBh1MDgCjdFE9vFYxT2AGsZEdflKftajYh90EjVdLF8I8hjxGQBju64dHqo3w QxAvoyCXbao= =VyYg -----END PGP SIGNATURE----- Sat Aug 1 18:01:28 UTC 2020 I: Checking whether the package is not for us Sat Aug 1 18:01:28 UTC 2020 I: Starting 1st build on remote node ff4a-armhf-rb.debian.net. Sat Aug 1 18:01:28 UTC 2020 I: Preparing to do remote build '1' on ff4a-armhf-rb.debian.net. Sat Aug 1 18:19:26 UTC 2020 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Aug 1 06:01:37 -12 2020 I: pbuilder-time-stamp: 1596304897 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [jigdo_0.7.3-5+deb10u1.dsc] I: copying [./jigdo_0.7.3.orig.tar.gz] I: copying [./jigdo_0.7.3-5+deb10u1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Tue Jun 16 21:05:42 2020 -12 gpgv: using RSA key CEBB52301D617E910390FE16587979573442684E gpgv: issuer "93sam@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./jigdo_0.7.3-5+deb10u1.dsc dpkg-source: info: extracting jigdo in jigdo-0.7.3 dpkg-source: info: unpacking jigdo_0.7.3.orig.tar.gz dpkg-source: info: unpacking jigdo_0.7.3-5+deb10u1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 00.richard_fixes.patch dpkg-source: info: applying 01.hardening.patch dpkg-source: info: applying 02.address_change.patch dpkg-source: info: applying 03.jigdo-lite-https.patch dpkg-source: info: applying 04.jigdo-lite-tmpdir.patch dpkg-source: info: applying 05.jigdo-lite-grep-options.patch dpkg-source: info: applying 06.jigdo-lite-store-filesPerFetch.patch dpkg-source: info: applying 07.more_https_support.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/13260/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='caafc81c7bca40d491aa6f84eb81b79f' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='13260' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.xudrkczhG1/pbuilderrc_Cj0f --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.xudrkczhG1/b1 --logfile b1/build.log jigdo_0.7.3-5+deb10u1.dsc' SUDO_GID='111' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux ff4a 4.19.0-10-armmp-lpae #1 SMP Debian 4.19.132-1 (2020-07-24) armv7l GNU/Linux I: ls -l /bin total 3328 -rwxr-xr-x 1 root root 767656 Apr 17 2019 bash -rwxr-xr-x 3 root root 26052 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 9636 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 22432 Feb 28 2019 cat -rwxr-xr-x 1 root root 38868 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 38836 Feb 28 2019 chmod -rwxr-xr-x 1 root root 42972 Feb 28 2019 chown -rwxr-xr-x 1 root root 88376 Feb 28 2019 cp -rwxr-xr-x 1 root root 75516 Jan 17 2019 dash -rwxr-xr-x 1 root root 71648 Feb 28 2019 date -rwxr-xr-x 1 root root 51212 Feb 28 2019 dd -rwxr-xr-x 1 root root 55672 Feb 28 2019 df -rwxr-xr-x 1 root root 88444 Feb 28 2019 dir -rwxr-xr-x 1 root root 54872 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 22364 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 18260 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 47356 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 21980 Apr 22 07:38 fusermount -rwxr-xr-x 1 root root 124508 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 64232 Jan 5 2019 gzip -rwxr-xr-x 1 root root 13784 Sep 26 2018 hostname -rwxr-xr-x 1 root root 43044 Feb 28 2019 ln -rwxr-xr-x 1 root root 34932 Jul 26 2018 login -rwxr-xr-x 1 root root 88444 Feb 28 2019 ls -rwxr-xr-x 1 root root 67036 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 47168 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 43040 Feb 28 2019 mknod -rwxr-xr-x 1 root root 26552 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 26024 Jan 9 2019 more -rwsr-xr-x 1 root root 34268 Jan 9 2019 mount -rwxr-xr-x 1 root root 9688 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 84284 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 22416 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 26504 Feb 28 2019 readlink -rwxr-xr-x 1 root root 42968 Feb 28 2019 rm -rwxr-xr-x 1 root root 26496 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 14136 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 31 20:26 sh -> dash -rwxr-xr-x 1 root root 22384 Feb 28 2019 sleep -rwxr-xr-x 1 root root 51124 Feb 28 2019 stty -rwsr-xr-x 1 root root 42472 Jan 9 2019 su -rwxr-xr-x 1 root root 22392 Feb 28 2019 sync -rwxr-xr-x 1 root root 283324 Apr 23 2019 tar -rwxr-xr-x 1 root root 9808 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 63464 Feb 28 2019 touch -rwxr-xr-x 1 root root 18260 Feb 28 2019 true -rwxr-xr-x 1 root root 9636 Apr 22 07:38 ulockmgr_server -rwsr-xr-x 1 root root 21976 Jan 9 2019 umount -rwxr-xr-x 1 root root 22380 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 88444 Feb 28 2019 vdir -rwxr-xr-x 1 root root 21980 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/13260/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), zlib1g-dev, libbz2-dev, libdb-dev (>= 4.8), libglib2.0-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. pbuilder-satisfydepends-dummy depends on libbz2-dev; however: Package libbz2-dev is not installed. pbuilder-satisfydepends-dummy depends on libdb-dev (>= 4.8); however: Package libdb-dev is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libbsd0{a} libbz2-dev{a} libcroco3{a} libdb-dev{a} libdb5.3-dev{a} libelf1{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libmount-dev{a} libmpdec2{a} libncurses6{a} libpcre16-3{a} libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpipeline1{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libselinux1-dev{a} libsepol1-dev{a} libsigsegv2{a} libssl1.1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} mime-support{a} pkg-config{a} po-debconf{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} uuid-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: bzip2-doc curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 67 newly installed, 0 to remove and 0 not upgraded. Need to get 30.4 MB of archives. After unpacking 112 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libpython3.7-minimal armhf 3.7.3-2+deb10u2 [582 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libexpat1 armhf 2.2.6-2+deb10u1 [78.0 kB] Get: 10 http://deb.debian.org/debian buster/main armhf python3.7-minimal armhf 3.7.3-2+deb10u2 [1466 kB] Get: 11 http://deb.debian.org/debian buster/main armhf python3-minimal armhf 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main armhf mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libmpdec2 armhf 2.4.2-2 [69.3 kB] Get: 14 http://deb.debian.org/debian buster/main armhf readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main armhf libreadline7 armhf 7.0-5 [131 kB] Get: 16 http://deb.debian.org/debian buster/main armhf libpython3.7-stdlib armhf 3.7.3-2+deb10u2 [1660 kB] Get: 17 http://deb.debian.org/debian buster/main armhf python3.7 armhf 3.7.3-2+deb10u2 [330 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libpython3-stdlib armhf 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main armhf python3 armhf 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 23 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 24 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 26 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 27 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 28 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 29 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 30 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 31 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 32 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 33 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 35 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 37 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 43 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 44 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 45 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 46 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 47 http://deb.debian.org/debian buster/main armhf uuid-dev armhf 2.33.1-0.1 [92.6 kB] Get: 48 http://deb.debian.org/debian buster/main armhf libblkid-dev armhf 2.33.1-0.1 [217 kB] Get: 49 http://deb.debian.org/debian buster/main armhf libbz2-dev armhf 1.0.6-9.2~deb10u1 [28.8 kB] Get: 50 http://deb.debian.org/debian buster/main armhf libdb5.3-dev armhf 5.3.28+dfsg1-0.5 [694 kB] Get: 51 http://deb.debian.org/debian buster/main armhf libdb-dev armhf 5.3.1+nmu1 [2500 B] Get: 52 http://deb.debian.org/debian buster/main armhf libffi-dev armhf 3.2.1-9 [154 kB] Get: 53 http://deb.debian.org/debian buster/main armhf libglib2.0-data all 2.58.3-2+deb10u2 [1110 kB] Get: 54 http://deb.debian.org/debian buster/main armhf libglib2.0-bin armhf 2.58.3-2+deb10u2 [119 kB] Get: 55 http://deb.debian.org/debian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB] Get: 56 http://deb.debian.org/debian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Get: 57 http://deb.debian.org/debian buster/main armhf libglib2.0-dev-bin armhf 2.58.3-2+deb10u2 [155 kB] Get: 58 http://deb.debian.org/debian buster/main armhf libmount-dev armhf 2.33.1-0.1 [223 kB] Get: 59 http://deb.debian.org/debian buster/main armhf libpcre16-3 armhf 2:8.39-12 [238 kB] Get: 60 http://deb.debian.org/debian buster/main armhf libpcre32-3 armhf 2:8.39-12 [231 kB] Get: 61 http://deb.debian.org/debian buster/main armhf libpcrecpp0v5 armhf 2:8.39-12 [150 kB] Get: 62 http://deb.debian.org/debian buster/main armhf libpcre3-dev armhf 2:8.39-12 [585 kB] Get: 63 http://deb.debian.org/debian buster/main armhf libsepol1-dev armhf 2.8-1 [318 kB] Get: 64 http://deb.debian.org/debian buster/main armhf libselinux1-dev armhf 2.8-1+b1 [162 kB] Get: 65 http://deb.debian.org/debian buster/main armhf pkg-config armhf 0.29-6 [60.7 kB] Get: 66 http://deb.debian.org/debian buster/main armhf zlib1g-dev armhf 1:1.2.11.dfsg-1 [207 kB] Get: 67 http://deb.debian.org/debian buster/main armhf libglib2.0-dev armhf 2.58.3-2+deb10u2 [1386 kB] Fetched 30.4 MB in 4s (7047 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../2-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../4-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u2_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.3-2+deb10u2) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u2_armhf.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u2) ... Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libpython3.7-minimal:armhf (3.7.3-2+deb10u2) ... Setting up libexpat1:armhf (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u2) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_armhf.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../2-libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../4-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u2_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.3-2+deb10u2) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u2_armhf.deb ... Unpacking python3.7 (3.7.3-2+deb10u2) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20288 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.3-1_armhf.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../03-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../06-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../07-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../08-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../09-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../10-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../11-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../12-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../13-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../14-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../15-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../16-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../17-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../18-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../19-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../20-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../21-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../22-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../23-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../24-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../25-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../26-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../27-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../28-uuid-dev_2.33.1-0.1_armhf.deb ... Unpacking uuid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../29-libblkid-dev_2.33.1-0.1_armhf.deb ... Unpacking libblkid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libbz2-dev:armhf. Preparing to unpack .../30-libbz2-dev_1.0.6-9.2~deb10u1_armhf.deb ... Unpacking libbz2-dev:armhf (1.0.6-9.2~deb10u1) ... Selecting previously unselected package libdb5.3-dev. Preparing to unpack .../31-libdb5.3-dev_5.3.28+dfsg1-0.5_armhf.deb ... Unpacking libdb5.3-dev (5.3.28+dfsg1-0.5) ... Selecting previously unselected package libdb-dev:armhf. Preparing to unpack .../32-libdb-dev_5.3.1+nmu1_armhf.deb ... Unpacking libdb-dev:armhf (5.3.1+nmu1) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../33-libffi-dev_3.2.1-9_armhf.deb ... Unpacking libffi-dev:armhf (3.2.1-9) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../34-libglib2.0-data_2.58.3-2+deb10u2_all.deb ... Unpacking libglib2.0-data (2.58.3-2+deb10u2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../35-libglib2.0-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../36-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../37-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../38-libglib2.0-dev-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../39-libmount-dev_2.33.1-0.1_armhf.deb ... Unpacking libmount-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libpcre16-3:armhf. Preparing to unpack .../40-libpcre16-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre16-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcre32-3:armhf. Preparing to unpack .../41-libpcre32-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre32-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:armhf. Preparing to unpack .../42-libpcrecpp0v5_2%3a8.39-12_armhf.deb ... Unpacking libpcrecpp0v5:armhf (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:armhf. Preparing to unpack .../43-libpcre3-dev_2%3a8.39-12_armhf.deb ... Unpacking libpcre3-dev:armhf (2:8.39-12) ... Selecting previously unselected package libsepol1-dev:armhf. Preparing to unpack .../44-libsepol1-dev_2.8-1_armhf.deb ... Unpacking libsepol1-dev:armhf (2.8-1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../45-libselinux1-dev_2.8-1+b1_armhf.deb ... Unpacking libselinux1-dev:armhf (2.8-1+b1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../46-pkg-config_0.29-6_armhf.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../47-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../48-libglib2.0-dev_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Setting up libpcrecpp0v5:armhf (2:8.39-12) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up mime-support (3.62) ... Setting up libpcre16-3:armhf (2:8.39-12) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up libsepol1-dev:armhf (2.8-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libffi-dev:armhf (3.2.1-9) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libglib2.0-data (2.58.3-2+deb10u2) ... Setting up uuid-dev:armhf (2.33.1-0.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libpcre32-3:armhf (2:8.39-12) ... Setting up autopoint (0.19.8.1-9) ... Setting up pkg-config (0.29-6) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up sensible-utils (0.0.12) ... Setting up libdb5.3-dev (5.3.28+dfsg1-0.5) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libreadline7:armhf (7.0-5) ... Setting up libbz2-dev:armhf (1.0.6-9.2~deb10u1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libblkid-dev:armhf (2.33.1-0.1) ... Setting up libpython3.7-stdlib:armhf (3.7.3-2+deb10u2) ... Setting up libtool (2.4.6-9) ... Setting up libpcre3-dev:armhf (2:8.39-12) ... Setting up libglib2.0-bin (2.58.3-2+deb10u2) ... Setting up m4 (1.4.18-2) ... Setting up libdb-dev:armhf (5.3.1+nmu1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libmount-dev:armhf (2.33.1-0.1) ... Setting up libpython3-stdlib:armhf (3.7.3-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u2) ... Setting up gettext (0.19.8.1-9) ... Setting up libselinux1-dev:armhf (2.8-1+b1) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Setting up po-debconf (1.0.21) ... Setting up libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Setting up dh-autoreconf (19) ... Setting up debhelper (12.1.1) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/jigdo-0.7.3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package jigdo dpkg-buildpackage: info: source version 0.7.3-5+deb10u1 dpkg-buildpackage: info: source distribution buster dpkg-buildpackage: info: source changed by Steve McIntyre <93sam@debian.org> dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp config.log [ ! -f Makefile ] || /usr/bin/make distclean dh_clean debian/rules build dh_testdir dh_auto_configure -- --without-gui --enable-nls ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking --without-gui --enable-nls checking for gawk... no checking for mawk... mawk checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for GCC version... 8 checking for a BSD-compatible install... /usr/bin/install -c checking how to run the C++ preprocessor... g++ -E checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for size_t... yes checking whether byte ordering is bigendian... no checking whether we are compiling for Windows... no checking whether the C++ compiler is recent enough... yes checking whether the C++ preprocessor supports variable-arg macros... yes checking for wget... no * wget was not found on your system. Please install * it, it is needed by jigdo-lite. checking for value of --enable-debug... "no" checking for value of --with-pkg-config-prefix... not set checking for ANSI C header files... (cached) yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for string.h... (cached) yes checking for zlibVersion in -lz... yes checking zlib.h usability... yes checking zlib.h presence... yes checking for zlib.h... yes checking for BZ2_bzCompressInit in -lbz2... yes checking bzlib.h usability... yes checking bzlib.h presence... yes checking for bzlib.h... yes checking for value of --with-libdb... "yes" checking db.h usability... yes checking db.h presence... yes checking for db.h... yes checking for libdb version in db.h... 5.3 * Warning: jigdo is only known to work with libdb * version 3 or 4 - maybe you should up/downgrade. * (Your system appears to be Debian-based; try * installing the `libdb4.2-dev' package.) checking for db_create in libdb-5.3... yes checking for value of --with-gui... "no" checking for value of --with-libcurl... "auto" checking for value of --with-uint64... "auto" checking for unsigned long long... yes checking for unsigned long... yes checking size of unsigned long... 4 checking for unsigned long long... yes checking size of unsigned long long... 8 checking for 64 bit unsigned integer type... unsigned long long checking for operator<<(uint64)... yes checking for string::compare(size_t,size_t,string,size_t,size_t)... yes checking for string::compare(size_t,size_t,const char*,size_t)... yes checking for lstat... yes checking for truncate... yes checking for ftruncate... yes checking for mmap... yes checking for memcpy... yes checking for fileno... yes checking for snprintf... yes checking for _snprintf... no checking for setenv... yes checking for TIOCGWINSZ ioctl... yes checking for getopt_long in ... yes checking for uname in ... yes checking for _stati64... no checking for value of --enable-nls... "yes" checking for dgettext in and libc... yes checking for catalogs to be installed... de configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: creating po/Makefile config.status: creating src/config.h touch configure-stamp dh_testdir /usr/bin/make \ EXTRA_CFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security" \ EXTRA_CXXFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security" \ EXTRA_LDFLAGS="-Wl,-z,relro" make[1]: Entering directory '/build/jigdo-0.7.3' test -h gfx -o -d gfx || ln -s "./gfx" gfx cd src && /usr/bin/make all EXTRA_CFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security" EXTRA_CXXFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security" EXTRA_LDFLAGS="-Wl,-z,relro" make[2]: Entering directory '/build/jigdo-0.7.3/src' export cpp='-Wdate-time -D_FORTIFY_SOURCE=2 -I. -I. -I./glibcurl -I./gtk -I./job -I./net -I./util -D_FILE_OFFSET_BITS=64 -DHAVE_CONFIG_H -DPACKAGE_DATA_DIR="/usr/share/jigdo/" -DPACKAGE_LOCALE_DIR="/usr/share/locale" ' export cxx="$cpp -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -Wpointer-arith -Wconversion -Woverloaded-virtual -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security" export c="$cpp -Wall -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security -W -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security" g++ $cxx -c cachefile.cc -o cachefile.o In file included from cachefile.cc:28: ./serialize.hh: In instantiation of 'Iterator serialize4(NumType, Iterator) [with NumType = long int; Iterator = unsigned char*]': cachefile.cc:117:29: required from here ./serialize.hh:156:10: warning: conversion from 'long int' to 'unsigned char' may change value [-Wconversion] *i = x & 0xff; ++i; ~~^~~~~~ ./serialize.hh:157:17: warning: conversion from 'long int' to 'unsigned char' may change value [-Wconversion] *i = (x >> 8) & 0xff; ++i; ~~~~~~~~~^~~~~~ ./serialize.hh:158:18: warning: conversion from 'long int' to 'unsigned char' may change value [-Wconversion] *i = (x >> 16) & 0xff; ++i; ~~~~~~~~~~^~~~~~ ./serialize.hh:159:18: warning: conversion from 'long int' to 'unsigned char' may change value [-Wconversion] *i = (x >> 24) & 0xff; ++i; ~~~~~~~~~~^~~~~~ g++ $cxx -c compat.cc -o compat.o g++ $cxx -c jigdo-file-cmd.cc -o jigdo-file-cmd.o In file included from ./jigdo-file-cmd.hh:28, from jigdo-file-cmd.cc:25: ./mkimage.hh:75:43: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] static void seekFromEnd(bistream& file) throw(JigdoDescError); ^~~~~ ./mkimage.hh:233:33: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] bistream& get(bistream& file) throw(JigdoDescError, bad_alloc); ^~~~~ ./mkimage.hh:295:5: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(JigdoDescError, bad_alloc) { ^~~~~ In file included from jigdo-file-cmd.cc:27: ./recursedir.hh:79:7: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(RecurseError, bad_alloc); ^~~~~ ./recursedir.hh:105:5: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(RecurseError); ^~~~~ jigdo-file-cmd.cc:56:59: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] istream* openForInput(istream*& dest, const string& name) throw(Cleanup) { ^~~~~ jigdo-file-cmd.cc:106:60: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] ostream* openForOutput(ostream*& dest, const string& name) throw(Cleanup) { ^~~~~ jigdo-file-cmd.cc: In static member function 'static int JigdoFileCmd::makeTemplate()': jigdo-file-cmd.cc:221:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr imageDel(openForInput(image, imageFile)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc:223:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr cfDel(new ConfigFile()); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc:227:5: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr jigdoMergeDel(openForInput(jigdoMerge, ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc:240:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr templDel(openForOutput(templ, templFile)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc:253:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc:269:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr jigdoDel(openForOutput(jigdoF, jigdoFile)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc: In static member function 'static int JigdoFileCmd::makeImage()': jigdo-file-cmd.cc:306:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr templDel(openForInput(templ, templFile)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc: In static member function 'static int JigdoFileCmd::listTemplate()': jigdo-file-cmd.cc:335:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr templDel(openForInput(templ, templFile)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc: In static member function 'static int JigdoFileCmd::verifyImage()': jigdo-file-cmd.cc:370:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr imageDel(openForInput(image, imageFile)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc:376:5: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr templDel(openForInput(templ, templFile)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc: In static member function 'static int JigdoFileCmd::printMissing(JigdoFileCmd::Command)': jigdo-file-cmd.cc:450:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr templDel(openForInput(templ, templFile)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc:465:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr jigdoDel(openForInput(jigdo, jigdoFile)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ jigdo-file-cmd.cc:466:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr cfDel(new ConfigFile()); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from jigdo-file-cmd.cc:17: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ g++ $cxx -c jigdo-file.cc -o jigdo-file.o In file included from ./jigdo-file-cmd.hh:28, from jigdo-file.cc:32: ./mkimage.hh:75:43: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] static void seekFromEnd(bistream& file) throw(JigdoDescError); ^~~~~ ./mkimage.hh:233:33: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] bistream& get(bistream& file) throw(JigdoDescError, bad_alloc); ^~~~~ ./mkimage.hh:295:5: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(JigdoDescError, bad_alloc) { ^~~~~ In file included from jigdo-file.cc:37: ./recursedir.hh:79:7: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(RecurseError, bad_alloc); ^~~~~ ./recursedir.hh:105:5: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(RecurseError); ^~~~~ jigdo-file.cc: In static member function 'static JigdoFileCmd::Command JigdoFileCmd::cmdOptions(int, char**)': jigdo-file.cc:557:35: warning: conversion from 'int' to 'char' may change value [-Wconversion] case 'h': case 'H': optHelp = c; break; ^ jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] }; ^ jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc:672:5: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] jigdo-file.cc: In function 'int main(int, char**)': jigdo-file.cc:777:10: warning: catching polymorphic type 'class std::bad_alloc' by value [-Wcatch-value=] catch (bad_alloc) { outOfMemory(); } ^~~~~~~~~ jigdo-file.cc: In function 'size_t {anonymous}::scanMemSize(const char*)': jigdo-file.cc:420:7: warning: this statement may fall through [-Wimplicit-fallthrough=] x = x * 1024; ~~^~~~~~~~~~ jigdo-file.cc:421:3: note: here case 'm': case 'M': ^~~~ jigdo-file.cc:422:7: warning: this statement may fall through [-Wimplicit-fallthrough=] x = x * 1024; ~~^~~~~~~~~~ jigdo-file.cc:423:3: note: here case 'k': case 'K': ^~~~ jigdo-file.cc:425:5: warning: this statement may fall through [-Wimplicit-fallthrough=] if (*++s == '\0') return x; ^~ jigdo-file.cc:426:3: note: here default: ^~~~~~~ g++ $cxx -c jigdoconfig.cc -o jigdoconfig.o g++ $cxx -c mkimage.cc -o mkimage.o In file included from mkimage.cc:30: ./mkimage.hh:75:43: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] static void seekFromEnd(bistream& file) throw(JigdoDescError); ^~~~~ ./mkimage.hh:233:33: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] bistream& get(bistream& file) throw(JigdoDescError, bad_alloc); ^~~~~ ./mkimage.hh:295:5: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(JigdoDescError, bad_alloc) { ^~~~~ mkimage.cc:76:45: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] void JigdoDesc::seekFromEnd(bistream& file) throw(JigdoDescError) { ^~~~~ mkimage.cc:114:5: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(JigdoDescError, bad_alloc) { ^~~~~ mkimage.cc: In member function 'bistream& JigdoDescVec::get(bistream&)': mkimage.cc:118:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr desc; ^~~~~~~~ In file included from /usr/include/c++/8/bits/locale_conv.h:41, from /usr/include/c++/8/locale:43, from /usr/include/c++/8/iomanip:43, from mkimage.cc:23: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ mkimage.cc: In function 'int {anonymous}::fileToImage(bostream*, FilePart&, const JigdoDesc::MatchedFile&, bool, size_t, {anonymous}::ProgressReporter&, byte*, size_t, uint64&, uint64&, uint64)': mkimage.cc:363:42: warning: conversion from 'long long unsigned int' to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t n = (toWrite < readAmount ? toWrite : readAmount); ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ mkimage.cc:382:40: warning: conversion from 'long long unsigned int' to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t n = (toWrite < readAmount ? toWrite : readAmount); ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ mkimage.cc:399:42: warning: conversion from 'long long unsigned int' to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t n = (toWrite < readAmount ? toWrite : readAmount); ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ mkimage.cc: In function 'int {anonymous}::writeAll(const {anonymous}::Task&, JigdoDescVec&, std::queue&, bistream*, size_t, bostream*, const char*, bool, {anonymous}::ProgressReporter&, JigdoCache*, uint64)': mkimage.cc:454:5: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr data(new Zibstream(*templ, readAmount + 8*1024)); ^~~~~~~~ In file included from /usr/include/c++/8/bits/locale_conv.h:41, from /usr/include/c++/8/locale:43, from /usr/include/c++/8/iomanip:43, from mkimage.cc:23: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ mkimage.cc:488:53: warning: conversion from 'long long unsigned int' to 'unsigned int' may change value [-Wconversion] data->read(buf, (toWrite < readAmount ? toWrite : readAmount)); ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ mkimage.cc:489:38: warning: conversion from 'Zibstream::streamsize' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t n = data->gcount(); ~~~~~~~~~~~~^~ mkimage.cc:512:50: warning: conversion from 'long long unsigned int' to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t n = (toWrite < readAmount ? toWrite : readAmount); ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ mkimage.cc: In static member function 'static int JigdoDesc::makeImage(JigdoCache*, const string&, const string&, const string&, bistream*, bool, JigdoDesc::ProgressReporter&, size_t, bool)': mkimage.cc:748:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr imgDel(img); ^~~~~~~~ In file included from /usr/include/c++/8/bits/locale_conv.h:41, from /usr/include/c++/8/locale:43, from /usr/include/c++/8/iomanip:43, from mkimage.cc:23: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from ./util/rsyncsum.hh:31, from ./scan.hh:31, from ./mkimage.hh:29, from mkimage.cc:30: ./serialize.hh: In instantiation of 'Iterator serialize4(NumType, Iterator) [with NumType = int; Iterator = unsigned char*]': mkimage.cc:256:33: required from here ./serialize.hh:156:10: warning: conversion from 'int' to 'unsigned char' may change value [-Wconversion] *i = x & 0xff; ++i; ~~^~~~~~ ./serialize.hh:157:17: warning: conversion from 'int' to 'unsigned char' may change value [-Wconversion] *i = (x >> 8) & 0xff; ++i; ~~~~~~~~~^~~~~~ ./serialize.hh:158:18: warning: conversion from 'int' to 'unsigned char' may change value [-Wconversion] *i = (x >> 16) & 0xff; ++i; ~~~~~~~~~~^~~~~~ ./serialize.hh:159:18: warning: conversion from 'int' to 'unsigned char' may change value [-Wconversion] *i = (x >> 24) & 0xff; ++i; ~~~~~~~~~~^~~~~~ ./serialize.hh: In instantiation of 'Iterator serialize1(NumType, Iterator) [with NumType = JigdoDesc::Type; Iterator = unsigned char*]': ./mkimage.hh:310:17: required from 'Iterator JigdoDesc::ImageInfo::serialize(Iterator) const [with Iterator = unsigned char*]' mkimage.cc:268:30: required from here ./serialize.hh:132:10: warning: conversion from 'int' to 'unsigned char' may change value [-Wconversion] *i = x & 0xff; ++i; ~~^~~~~~ ./serialize.hh: In instantiation of 'Iterator serialize4(NumType, Iterator) [with NumType = unsigned int; Iterator = unsigned char*]': ./mkimage.hh:313:17: required from 'Iterator JigdoDesc::ImageInfo::serialize(Iterator) const [with Iterator = unsigned char*]' mkimage.cc:268:30: required from here ./serialize.hh:159:18: warning: conversion from 'unsigned int' to 'unsigned char' may change value [-Wconversion] *i = (x >> 24) & 0xff; ++i; ~~~~~~~~~~^~~~~~ g++ $cxx -c mkjigdo.cc -o mkjigdo.o g++ $cxx -c mktemplate.cc -o mktemplate.o In file included from mktemplate.cc:42: ./mkimage.hh:75:43: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] static void seekFromEnd(bistream& file) throw(JigdoDescError); ^~~~~ ./mkimage.hh:233:33: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] bistream& get(bistream& file) throw(JigdoDescError, bad_alloc); ^~~~~ ./mkimage.hh:295:5: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(JigdoDescError, bad_alloc) { ^~~~~ mktemplate.cc: In member function 'void MkTemplate::checkRsyncSumMatch2(size_t, size_t, size_t, uint64&, FilePart*)': mktemplate.cc:268:52: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t eventLen = (file->size() < md5BlockLength ? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^ file->size() : md5BlockLength); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mktemplate.cc: In member function 'bool MkTemplate::rereadUnmatched(FilePart*, uint64)': mktemplate.cc:310:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr inputFile(new bifstream(inputName.c_str(),ios::binary)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from mktemplate.cc:35: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ mktemplate.cc:314:35: warning: conversion from 'long long unsigned int' to 'std::streamsize' {aka 'int'} may change value [-Wconversion] (readAmount < count ? readAmount : count)); ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ mktemplate.cc: In member function 'bool MkTemplate::checkMD5Match(byte*, size_t, size_t, size_t, uint64&, size_t, MkTemplate::Desc&)': mktemplate.cc:520:38: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t toReread = unmatchedStart - oldestMatch->startOffset(); ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ mktemplate.cc:531:39: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t toWrite = x->startOffset() - unmatchedStart; ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ mktemplate.cc:533:42: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t writeStart = modSub(data, off - unmatchedStart, bufferLength); ~~~~^~~~~~~~~~~~~~~~ mktemplate.cc: In member function 'bool MkTemplate::unmatchedAtEnd(byte*, size_t, size_t, MkTemplate::Desc&)': mktemplate.cc:579:38: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t toReread = unmatchedStart - y->startOffset(); ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~ mktemplate.cc:587:26: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t toWrite = off - unmatchedStart; ~~~~^~~~~~~~~~~~~~~~ mktemplate.cc: In member function 'void MkTemplate::scanImage_mainLoop_fastForward(uint64, RsyncSum64*, byte*, size_t*, size_t*, size_t*, size_t, size_t, uint32, size_t)': mktemplate.cc:655:35: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'unsigned int' may change value [-Wconversion] unsigned len = nextAlignedOff - off; ~~~~~~~~~~~~~~~^~~~~ mktemplate.cc:656:48: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'unsigned int' may change value [-Wconversion] if (len > nextEvent - off) len = nextEvent - off; ~~~~~~~~~~^~~~~ mktemplate.cc: In member function 'bool MkTemplate::scanImage(byte*, size_t, size_t, uint32, size_t, MD5Sum&)': mktemplate.cc:739:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr zipDel; ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from mktemplate.cc:35: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ mktemplate.cc:792:44: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t toWrite = newUnmatchedStart - unmatchedStart; ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ mktemplate.cc:796:46: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t writeStart = modSub(data, off - unmatchedStart, ~~~~^~~~~~~~~~~~~~~~ mktemplate.cc:900:52: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] if (stillBuffered > off) stillBuffered = off; ^~~ mktemplate.cc: At global scope: mktemplate.cc:141:8: warning: 'void {anonymous}::write48(bostream&, uint64)' defined but not used [-Wunused-function] void write48(bostream& s, uint64 x) { ^~~~~~~ g++ $cxx -c partialmatch.cc -o partialmatch.o g++ $cxx -c recursedir.cc -o recursedir.o recursedir.cc:235:5: warning: #warning TODO hackish [-Wcpp] # warning TODO hackish ^~~~~~~ In file included from recursedir.cc:32: ./recursedir.hh:79:7: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(RecurseError, bad_alloc); ^~~~~ ./recursedir.hh:105:5: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(RecurseError); ^~~~~ recursedir.cc:68:52: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] bool RecurseDir::getNextObjectName(string& result) throw(RecurseError) { ^~~~~ recursedir.cc:140:5: warning: dynamic exception specifications are deprecated in C++11 [-Wdeprecated] throw(RecurseError, bad_alloc) { ^~~~~ g++ $cxx -c scan.cc -o scan.o scan.cc: In member function 'const MD5* FilePart::getSumsRead(JigdoCache*, size_t)': scan.cc:229:48: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'std::vector::size_type' {aka 'unsigned int'} may change value [-Wconversion] sums.resize((size() + c->md5BlockLength - 1) / c->md5BlockLength); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~ scan.cc: In member function 'const MD5Sum* FilePart::getMD5SumRead(JigdoCache*)': scan.cc:419:74: warning: conversion from 'uint64' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] (fileSize + c->md5BlockLength - 1) / c->md5BlockLength - 1) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ In file included from ./util/rsyncsum.hh:31, from ./scan.hh:31, from scan.cc:30: ./serialize.hh: In instantiation of 'Iterator serialize4(NumType, Iterator) [with NumType = unsigned int; Iterator = unsigned char*]': scan.cc:137:40: required from here ./serialize.hh:159:18: warning: conversion from 'unsigned int' to 'unsigned char' may change value [-Wconversion] *i = (x >> 24) & 0xff; ++i; ~~~~~~~~~~^~~~~~ g++ $cxx -c util/bstream.cc -o util/bstream.o g++ $cxx -c util/configfile.cc -o util/configfile.o gcc $c -c util/glibc-getopt.c -o util/glibc-getopt.o gcc $c -c util/glibc-getopt1.c -o util/glibc-getopt1.o g++ $cxx -c util/glibc-md5.cc -o util/glibc-md5.o g++ $cxx -c util/log.cc -o util/log.o util/log.cc: In constructor 'Logger::Logger(const char*, bool)': util/log.cc:30:48: warning: conversion from 'size_t' {aka 'unsigned int'} to 'unsigned char' may change value [-Wconversion] : unitNameVal(unitName), unitNameLen(strlen(unitName)), ~~~~~~^~~~~~~~~~ g++ $cxx -c util/md5sum.cc -o util/md5sum.o util/md5sum.cc: In member function 'uint64 MD5Sum::updateFromStream(bistream&, uint64, size_t, MD5Sum::ProgressReporter&)': util/md5sum.cc:116:34: warning: conversion from 'long long unsigned int' to 'size_t' {aka 'unsigned int'} may change value [-Wconversion] size_t n = (toRead < bufSize ? toRead : bufSize); ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~ g++ $cxx -c util/rsyncsum.cc -o util/rsyncsum.o g++ $cxx -c util/string.cc -o util/string.o util/string.cc: In static member function 'static std::__cxx11::string Subst::subst(const char*, int, const Subst*)': util/string.cc:85:18: warning: conversion from 'int' to 'char' may change value [-Wconversion] char max = '1' + args; ~~~~^~~~~~ g++ $cxx -c zstream.cc -o zstream.o zstream.cc: In member function 'Zibstream& Zibstream::read(byte*, unsigned int)': zstream.cc:266:42: warning: conversion from 'long long unsigned int' to 'unsigned int' may change value [-Wconversion] unsigned toRead = (dataLen < bufSize ? dataLen : bufSize); ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ In file included from zstream.cc:26: ./serialize.hh: In instantiation of 'Iterator serialize4(NumType, Iterator) [with NumType = unsigned int; Iterator = unsigned char*]': zstream.cc:78:23: required from here ./serialize.hh:159:18: warning: conversion from 'unsigned int' to 'unsigned char' may change value [-Wconversion] *i = (x >> 24) & 0xff; ++i; ~~~~~~~~~~^~~~~~ g++ $cxx -c zstream-bz.cc -o zstream-bz.o g++ $cxx -c zstream-gz.cc -o zstream-gz.o zstream-gz.cc: In function 'void {anonymous}::throwZerrorGz(int, const char*)': zstream-gz.cc:51:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (m.empty()) m = "zlib Z_STREAM_ERROR"; ^~ zstream-gz.cc:52:5: note: here case Z_DATA_ERROR: ^~~~ zstream-gz.cc:53:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (m.empty()) m = "zlib Z_DATA_ERROR"; ^~ zstream-gz.cc:54:5: note: here case Z_BUF_ERROR: ^~~~ zstream-gz.cc:55:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (m.empty()) m = "zlib Z_BUF_ERROR"; ^~ zstream-gz.cc:56:5: note: here case Z_VERSION_ERROR: ^~~~ zstream-gz.cc:57:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (m.empty()) m = "zlib Z_VERSION_ERROR"; ^~ zstream-gz.cc:58:5: note: here default: ^~~~~~~ g++ $cxx -c util/debug.cc -o util/debug.o g++ -o jigdo-file cachefile.o compat.o jigdo-file-cmd.o jigdo-file.o jigdoconfig.o mkimage.o mkjigdo.o mktemplate.o partialmatch.o recursedir.o scan.o util/bstream.o util/configfile.o util/glibc-getopt.o util/glibc-getopt1.o util/glibc-md5.o util/log.o util/md5sum.o util/rsyncsum.o util/string.o zstream.o zstream-bz.o zstream-gz.o util/debug.o -lbz2 -lz -ldb-5.3 -Wl,-z,relro -Wl,-z,relro make[2]: Leaving directory '/build/jigdo-0.7.3/src' cd doc && /usr/bin/make all make[2]: Entering directory '/build/jigdo-0.7.3/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/jigdo-0.7.3/doc' cd po && /usr/bin/make all make[2]: Entering directory '/build/jigdo-0.7.3/po' rm -f "de.gmo" && msgfmt --statistics -o "de.gmo" de.po 300 translated messages. make[2]: Leaving directory '/build/jigdo-0.7.3/po' make[1]: Leaving directory '/build/jigdo-0.7.3' /usr/bin/make X="`arm-linux-gnueabihf-pkg-config glib-2.0 --cflags`" \ EXTRA_CFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security" \ EXTRA_CXXFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/jigdo-0.7.3=. -fstack-protector-strong -Wformat -Werror=format-security" \ EXTRA_LDFLAGS="-Wl,-z,relro" \ GLIBLIBS="`arm-linux-gnueabihf-pkg-config glib-2.0 --libs`" -C src test || true make[1]: Entering directory '/build/jigdo-0.7.3/src' g++ $cxx -c job/jigdo-io-test.cc -o job/jigdo-io-test.o In file included from ./job/makeimagedl.hh:39, from job/jigdo-io-test.cc:22: ./job/url-mapping.hh:168:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr > seen; ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from ./job/makeimagedl.hh:39, from job/jigdo-io-test.cc:22: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from job/jigdo-io-test.cc:22: ./job/makeimagedl.hh: In member function 'Job::MakeImageDl::Child* Job::MakeImageDl::childFor(PartUrlMapping*, const MD5*)': ./job/makeimagedl.hh:489:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr > lastUrl(new vector); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from ./job/makeimagedl.hh:39, from job/jigdo-io-test.cc:22: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from job/jigdo-io-test.cc:29: ./job/jigdo-io.cc: In member function 'void Job::JigdoIO::include(std::__cxx11::string*)': ./job/jigdo-io.cc:484:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr childDl( ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from ./job/makeimagedl.hh:39, from job/jigdo-io-test.cc:22: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ job/jigdo-io-test.cc: In member function 'Job::MakeImageDl::Child* Job::MakeImageDl::childFor(const string&, const MD5*, std::__cxx11::string*, Job::MakeImageDl::Child*)': job/jigdo-io-test.cc:206:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr dl(new MemData(0, url, contents)); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from ./job/makeimagedl.hh:39, from job/jigdo-io-test.cc:22: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from ./job/job.hh:23, from ./job/datasource.hh:21, from ./job/makeimagedl.hh:29, from job/jigdo-io-test.cc:22: ./job/job.hh: In instantiation of 'void IOSource::addListener(SomeIO&) [with SomeIO = Job::DataSource::IO]': ./job/makeimagedl.hh:516:60: required from here ./job/job.hh:130:43: warning: the compiler can assume that the address of 'l' will never be NULL [-Waddress] void addListener(SomeIO& l) { Assert(&l != 0); list.push_front(l); } ./util/debug.hh:91:14: note: in definition of macro 'Assert' ((void) ((_expr) ? 0 : \ ^~~~~ g++ $cxx -c util/string-utf.cc -o util/string-utf.o g++ $cxx -c job/datasource.cc -o job/datasource.o g++ $cxx -c util/gunzip.cc -o util/gunzip.o util/gunzip.cc: In member function 'void Gunzip::inject(const byte*, unsigned int)': util/gunzip.cc:106:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (z.avail_in == 0) break; ^~ util/gunzip.cc:108:5: note: here case INIT1: ^~~~ util/gunzip.cc:118:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (z.avail_in == 0) break; ^~ util/gunzip.cc:120:5: note: here case HEADER_CM: ^~~~ util/gunzip.cc:131:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (z.avail_in == 0) break; ^~ util/gunzip.cc:133:5: note: here case HEADER_FLG: ^~~~ util/gunzip.cc:156:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (z.avail_in == 0) break; ^~ util/gunzip.cc:158:5: note: here case HEADER_FEXTRA1: ^~~~ util/gunzip.cc:181:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (z.avail_in == 0) break; ^~ util/gunzip.cc:183:5: note: here case HEADER_FCOMMENT: ^~~~ util/gunzip.cc:245:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (z.avail_in == 0) break; ^~ util/gunzip.cc:247:5: note: here case TRAILER_CRC1: ^~~~ util/gunzip.cc:256:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (z.avail_in == 0) break; ^~ util/gunzip.cc:258:5: note: here case TRAILER_CRC2: ^~~~ util/gunzip.cc:267:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (z.avail_in == 0) break; ^~ util/gunzip.cc:269:5: note: here case TRAILER_CRC3: ^~~~ g++ $cxx -c net/uri.cc -o net/uri.o g++ $cxx -c job/url-mapping.cc -o job/url-mapping.o In file included from job/url-mapping.cc:23: ./job/url-mapping.hh:168:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr > seen; ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from job/url-mapping.cc:23: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ g++ -o job/jigdo-io-test job/jigdo-io-test.o util/log.o util/string-utf.o util/debug.o job/datasource.o util/gunzip.o util/configfile.o util/md5sum.o util/glibc-md5.o net/uri.o job/url-mapping.o -Wl,-z,relro -lglib-2.0 -lbz2 -lz -ldb-5.3 g++ $cxx -c job/makeimagedl-info-test.cc -o job/makeimagedl-info-test.o In file included from ./job/makeimagedl.hh:39, from job/makeimagedl-info-test.cc:20: ./job/url-mapping.hh:168:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr > seen; ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from ./job/makeimagedl.hh:39, from job/makeimagedl-info-test.cc:20: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from job/makeimagedl-info-test.cc:20: ./job/makeimagedl.hh: In member function 'Job::MakeImageDl::Child* Job::MakeImageDl::childFor(PartUrlMapping*, const MD5*)': ./job/makeimagedl.hh:489:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr > lastUrl(new vector); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from ./job/makeimagedl.hh:39, from job/makeimagedl-info-test.cc:20: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from job/makeimagedl-info-test.cc:18: ./job/job.hh: In instantiation of 'void IOSource::addListener(SomeIO&) [with SomeIO = Job::DataSource::IO]': ./job/makeimagedl.hh:516:60: required from here ./job/job.hh:130:43: warning: the compiler can assume that the address of 'l' will never be NULL [-Waddress] void addListener(SomeIO& l) { Assert(&l != 0); list.push_front(l); } ./util/debug.hh:91:14: note: in definition of macro 'Assert' ((void) ((_expr) ? 0 : \ ^~~~~ g++ $cxx -c job/makeimagedl-info.cc -o job/makeimagedl-info.o In file included from ./job/makeimagedl.hh:39, from job/makeimagedl-info.cc:18: ./job/url-mapping.hh:168:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr > seen; ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from ./job/makeimagedl.hh:39, from job/makeimagedl-info.cc:18: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from job/makeimagedl-info.cc:18: ./job/makeimagedl.hh: In member function 'Job::MakeImageDl::Child* Job::MakeImageDl::childFor(PartUrlMapping*, const MD5*)': ./job/makeimagedl.hh:489:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr > lastUrl(new vector); ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from ./job/makeimagedl.hh:39, from job/makeimagedl-info.cc:18: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ In file included from ./util/configfile.hh:73, from ./jigdoconfig.hh:27, from job/makeimagedl-info.cc:17: ./job/job.hh: In instantiation of 'void IOSource::addListener(SomeIO&) [with SomeIO = Job::DataSource::IO]': ./job/makeimagedl.hh:516:60: required from here ./job/job.hh:130:43: warning: the compiler can assume that the address of 'l' will never be NULL [-Waddress] void addListener(SomeIO& l) { Assert(&l != 0); list.push_front(l); } ./util/debug.hh:91:14: note: in definition of macro 'Assert' ((void) ((_expr) ? 0 : \ ^~~~~ g++ -o job/makeimagedl-info-test job/makeimagedl-info-test.o util/log.o util/string-utf.o util/debug.o job/makeimagedl-info.o net/uri.o -Wl,-z,relro -lglib-2.0 g++ $cxx -c job/url-mapping-test.cc -o job/url-mapping-test.o In file included from job/url-mapping-test.cc:23: ./job/url-mapping.hh:168:3: warning: 'template class std::auto_ptr' is deprecated [-Wdeprecated-declarations] auto_ptr > seen; ^~~~~~~~ In file included from /usr/include/c++/8/memory:80, from ./job/url-mapping.hh:34, from job/url-mapping-test.cc:23: /usr/include/c++/8/bits/unique_ptr.h:53:28: note: declared here template class auto_ptr; ^~~~~~~~ job/url-mapping-test.cc: In function 'int main(int, char**)': job/url-mapping-test.cc:255:22: warning: conversion from 'int' to 'byte' {aka 'unsigned char'} may change value [-Wconversion] md[i].sum[j] = ++n; ^~~ g++ -o job/url-mapping-test job/url-mapping-test.o util/log.o util/string-utf.o util/debug.o job/url-mapping.o util/configfile.o util/md5sum.o util/glibc-md5.o net/uri.o -Wl,-z,relro -lglib-2.0 g++ $cxx -c net/proxyguess-test.cc -o net/proxyguess-test.o In file included from net/proxyguess-test.cc:27: ./glibcurl/glibcurl.h:34:10: fatal error: curl/curl.h: No such file or directory #include ^~~~~~~~~~~~~ compilation terminated. make[1]: *** [Makefile:97: net/proxyguess-test.o] Error 1 make[1]: Leaving directory '/build/jigdo-0.7.3/src' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep /usr/bin/make DESTDIR=debian/jigdo-file install-po \ install-jigdo-file install-jigdo-lite install-jigdo-mirror make[1]: Entering directory '/build/jigdo-0.7.3' if test -n "de.gmo"; then for file in de.gmo; do \ lang=`echo $file | sed -e 's/\.gmo$//'`; \ dir="debian/jigdo-file/usr/share/locale/$lang/LC_MESSAGES"; \ echo "/usr/bin/install -c -d \"$dir\""; \ /usr/bin/install -c -d "$dir"; \ s="./po/$file"; \ if test -f "po/$file"; then s="po/$file"; fi; \ echo "/usr/bin/install -c -m 644 $s \"$dir/jigdo.mo\""; \ /usr/bin/install -c -m 644 "$s" "$dir/jigdo.mo" \ || exit 1; \ done; fi /usr/bin/install -c -d "debian/jigdo-file/usr/share/locale/de/LC_MESSAGES" /usr/bin/install -c -m 644 po/de.gmo "debian/jigdo-file/usr/share/locale/de/LC_MESSAGES/jigdo.mo" /usr/bin/install -c -d debian/jigdo-file/usr/bin /usr/bin/install -c src/jigdo-file debian/jigdo-file/usr/bin /usr/bin/install -c -d debian/jigdo-file/usr/share/man/man1 x="doc/jigdo-file.1"; \ test -f "$x" || x="./$x"; \ /usr/bin/install -c "$x" debian/jigdo-file/usr/share/man/man1 /usr/bin/install -c -d "debian/jigdo-file/usr/bin" /usr/bin/install -c -d "debian/jigdo-file/usr/share/jigdo" /usr/bin/install -c -m 755 "./scripts/jigdo-lite" \ "debian/jigdo-file/usr/bin" sed -e 's%"\(mirrors.jigdo"\)%"/usr/share/jigdo/debian-\1%' \ <"./scripts/jigdo-lite" \ >"debian/jigdo-file/usr/bin/jigdo-lite" /usr/bin/install -c -m 644 "./scripts/debian-mirrors.jigdo" \ "debian/jigdo-file/usr/share/jigdo" /usr/bin/install -c -d debian/jigdo-file/usr/share/man/man1 x="doc/jigdo-lite.1"; \ test -f "$x" || x="./$x"; \ /usr/bin/install -c "$x" debian/jigdo-file/usr/share/man/man1 /usr/bin/install -c -d "debian/jigdo-file/usr/bin" /usr/bin/install -c -m 755 "./scripts/jigdo-mirror" \ "debian/jigdo-file/usr/bin" /usr/bin/install -c -d debian/jigdo-file/usr/share/man/man1 x="doc/jigdo-mirror.1"; \ test -f "$x" || x="./$x"; \ /usr/bin/install -c "$x" debian/jigdo-file/usr/share/man/man1 make[1]: Leaving directory '/build/jigdo-0.7.3' dh_testdir dh_testroot dh_installdocs dh_installexamples dh_installmenu dh_installchangelogs dh_link dh_strip dh_compress dh_fixperms dh_installdeb dh_shlibdeps dpkg-shlibdeps: warning: debian/jigdo-file/usr/bin/jigdo-file contains an unresolvable reference to symbol __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'jigdo-file' in '../jigdo-file_0.7.3-5+deb10u1_armhf.deb'. dpkg-deb: building package 'jigdo-file-dbgsym' in '../jigdo-file-dbgsym_0.7.3-5+deb10u1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../jigdo_0.7.3-5+deb10u1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/13260 and its subdirectories I: Current time: Sat Aug 1 06:18:28 -12 2020 I: pbuilder-time-stamp: 1596305908 Sat Aug 1 18:19:29 UTC 2020 I: 1st build successful. Starting 2nd build on remote node jtx1c-armhf-rb.debian.net. Sat Aug 1 18:19:29 UTC 2020 I: Preparing to do remote build '2' on jtx1c-armhf-rb.debian.net. Sat Aug 1 18:23:42 UTC 2020 I: Deleting $TMPDIR on jtx1c-armhf-rb.debian.net. Sat Aug 1 18:23:45 UTC 2020 I: jigdo_0.7.3-5+deb10u1_armhf.changes: Format: 1.8 Date: Tue, 16 Jun 2020 21:54:52 +0100 Source: jigdo Binary: jigdo-file jigdo-file-dbgsym Architecture: armhf Version: 0.7.3-5+deb10u1 Distribution: buster Urgency: medium Maintainer: Steve McIntyre <93sam@debian.org> Changed-By: Steve McIntyre <93sam@debian.org> Description: jigdo-file - Download Debian CD images from any Debian mirror Closes: 962776 Changes: jigdo (0.7.3-5+deb10u1) buster; urgency=medium . * Backport more upstream changes to make jigdo-lite and jigdo-mirror support https. Closes: #962776 Checksums-Sha1: 7730f7ed5c9bb6d529bcb216477f843a637b024a 1651388 jigdo-file-dbgsym_0.7.3-5+deb10u1_armhf.deb dcdbf7a0e7b788efa10a4f4dcf94f50ede46b722 168368 jigdo-file_0.7.3-5+deb10u1_armhf.deb 2cb136df3ba1c316fd35f5a7381f7efa854b1cc3 5697 jigdo_0.7.3-5+deb10u1_armhf.buildinfo Checksums-Sha256: 2e659a542f9da66ba16e0c8f7c6f920c0946679d3868efc9f2b4d5bd9db9dd03 1651388 jigdo-file-dbgsym_0.7.3-5+deb10u1_armhf.deb 3c73e8376e862987005872e2b0f4dbaa9d4f53264297f87c15e46bfc6ace428d 168368 jigdo-file_0.7.3-5+deb10u1_armhf.deb bf2afeffa68508c4adb84a23d8ebd1ee294ebb2aee0638f1bc5c0fcf107d2f88 5697 jigdo_0.7.3-5+deb10u1_armhf.buildinfo Files: 1c170adaff556bc59457d6857cac3a1b 1651388 debug optional jigdo-file-dbgsym_0.7.3-5+deb10u1_armhf.deb edeea77c8265f9b2db9a912dd3108a7e 168368 utils optional jigdo-file_0.7.3-5+deb10u1_armhf.deb 734ba38cf93c85bcfb484d311077bf57 5697 utils optional jigdo_0.7.3-5+deb10u1_armhf.buildinfo Sat Aug 1 18:23:46 UTC 2020 I: diffoscope 154 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.xudrkczhG1/jigdo_0.7.3-5+deb10u1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.xudrkczhG1/jigdo_0.7.3-5+deb10u1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.xudrkczhG1/jigdo_0.7.3-5+deb10u1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.xudrkczhG1/b1/jigdo_0.7.3-5+deb10u1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.xudrkczhG1/b2/jigdo_0.7.3-5+deb10u1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.872s) 0.872s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.046s) 0.046s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sat Aug 1 18:56:34 UTC 2020 I: diffoscope 154 found no differences in the changes files, and a .buildinfo file also exists. Sat Aug 1 18:56:34 UTC 2020 I: jigdo from buster built successfully and reproducibly on armhf. Sat Aug 1 18:56:39 UTC 2020 I: Submitting .buildinfo files to external archives: Sat Aug 1 18:56:39 UTC 2020 I: Submitting 8.0K b1/jigdo_0.7.3-5+deb10u1_armhf.buildinfo.asc Sat Aug 1 18:56:42 UTC 2020 I: Submitting 8.0K b2/jigdo_0.7.3-5+deb10u1_armhf.buildinfo.asc Sat Aug 1 18:56:43 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Aug 1 18:56:43 UTC 2020 I: Done submitting .buildinfo files. Sat Aug 1 18:56:43 UTC 2020 I: Removing signed jigdo_0.7.3-5+deb10u1_armhf.buildinfo.asc files: removed './b1/jigdo_0.7.3-5+deb10u1_armhf.buildinfo.asc' removed './b2/jigdo_0.7.3-5+deb10u1_armhf.buildinfo.asc'