Fri May 15 12:49:20 UTC 2020 I: starting to build elementtidy/buster/armhf on jenkins on '2020-05-15 12:48' Fri May 15 12:49:20 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_10/1612/console.log Fri May 15 12:49:20 UTC 2020 I: Downloading source for buster/elementtidy=1.0-8 --2020-05-15 12:49:20-- http://deb.debian.org/debian/pool/main/e/elementtidy/elementtidy_1.0-8.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2062 (2.0K) Saving to: ‘elementtidy_1.0-8.dsc’ 0K .. 100% 22.5M=0s 2020-05-15 12:49:20 (22.5 MB/s) - ‘elementtidy_1.0-8.dsc’ saved [2062/2062] Fri May 15 12:49:20 UTC 2020 I: elementtidy_1.0-8.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 1.0 Source: elementtidy Binary: python-elementtidy Architecture: any Version: 1.0-8 Maintainer: Debian Python Modules Team Uploaders: Torsten Marek Homepage: http://effbot.org/zone/element-tidylib.htm Standards-Version: 3.8.3 Vcs-Browser: http://anonscm.debian.org/viewvc/python-modules/packages/elementtidy/trunk/ Vcs-Svn: svn://anonscm.debian.org/python-modules/packages/elementtidy/trunk/ Build-Depends: cdbs (>= 0.4.49), patchutils (>= 0.2.25), debhelper (>= 5.0.37.2), python-all-dev (>= 2.6.6-3~), dh-python, libtidy-dev Package-List: python-elementtidy deb python optional arch=any Checksums-Sha1: 6daee68ed1e4489a9fd05412bb045d58e7ca13bc 209643 elementtidy_1.0.orig.tar.gz 36ec6af44a97ad6f18497dcb4884728c93f9e979 4914 elementtidy_1.0-8.diff.gz Checksums-Sha256: 987abda851c35d58ed1ffce5c804821d8fe846c3ed9242227f0b8ca41d124fd8 209643 elementtidy_1.0.orig.tar.gz 0491cd179a60d2020237c0e3839099e28682a6d9112f9ad71f73c28a48c867ac 4914 elementtidy_1.0-8.diff.gz Files: 3f6defac0786aaa071cca76b82d609f2 209643 elementtidy_1.0.orig.tar.gz dfd219af5d29c70cef4b80408997f13d 4914 elementtidy_1.0-8.diff.gz Python-Version: >= 2.5 -----BEGIN PGP SIGNATURE----- iQIcBAEBCgAGBQJV1OvTAAoJEDNi9wMaSZLh55sP/iq/zeE3XgIIKML4sIc31G9O LXnUdFM2d+XqK6W4GKMg7OSPKetUfVgHX1Kc9HBdNeSt2IeO1RCJwPkykj4c6PvT nRb350E/JAlFMpxKLQdf3cSxfoKd88pievguDN0JmiTFqkcHUADqmNok9Zxrtjl4 FEKB+b4cpAqINs4kzoEQAns6uM+HqpeQKbTLdpREiIWVb8aGTUm/EzOIi4O5Vfd7 tdw7oKWIXZ3IJ8OQyk/w2whwbONlNHkAtgMvQ2XCfFW7LegiHsiOAMSVxeI11o99 WLIOw5Ojo1B6P8/1mg+i3jCw7xjSpFxGCI6EC9yu5PMN7S0NrswaRwJrVc+QbgOr nh7jsD8kMUo3BAgrTwpjzzvULfvY4J3v2H/MYa16vclxcZZFAAX0eOkuKsqZr4aP VT0i8UKMSq+HDm9xIHqHc8DYOFnxgexZ5Kq+6qxImW2cXYLgRFMSAVZK1VvspBp/ 7QAc5GJuoA55pZKekDXE7WGvZmgJaQwS2oQMFxjPvyUGa6VrgnLmZ18SY9tuj2kz hJn+dP3cYdP0p0yDW0GYqzV3F9/4lZOGnSu3VlTaFfHipqZ8ic4fAfNT4gS2YAdc vXUiMD93bUsahFNesMv6ectkjcsidUaB7u+fjNpxeeqNXaPMOsV8JG9OSGLOCcPf B7WAFgWMptM9yWuKbgsb =XYSn -----END PGP SIGNATURE----- Fri May 15 12:49:20 UTC 2020 I: Checking whether the package is not for us Fri May 15 12:49:20 UTC 2020 I: Starting 1st build on remote node cbxi4pro0-armhf-rb.debian.net. Fri May 15 12:49:20 UTC 2020 I: Preparing to do remote build '1' on cbxi4pro0-armhf-rb.debian.net. Fri May 15 12:52:16 UTC 2020 I: Deleting $TMPDIR on cbxi4pro0-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri May 15 00:49:28 -12 2020 I: pbuilder-time-stamp: 1589546968 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [elementtidy_1.0-8.dsc] I: copying [./elementtidy_1.0.orig.tar.gz] I: copying [./elementtidy_1.0-8.diff.gz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Wed Aug 19 08:49:23 2015 -12 gpgv: using RSA key 3362F7031A4992E1 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./elementtidy_1.0-8.dsc dpkg-source: info: extracting elementtidy in elementtidy-1.0 dpkg-source: info: unpacking elementtidy_1.0.orig.tar.gz dpkg-source: info: applying elementtidy_1.0-8.diff.gz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: cdbs (>= 0.4.49), patchutils (>= 0.2.25), debhelper (>= 5.0.37.2), python-all-dev (>= 2.6.6-3~), dh-python, libtidy-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on cdbs (>= 0.4.49); however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on patchutils (>= 0.2.25); however: Package patchutils is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 5.0.37.2); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on python-all-dev (>= 2.6.6-3~); however: Package python-all-dev is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on libtidy-dev; however: Package libtidy-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} cdbs{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libexpat1{a} libexpat1-dev{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libmpdec2{a} libncurses6{a} libpipeline1{a} libpython-all-dev{a} libpython-dev{a} libpython-stdlib{a} libpython2-dev{a} libpython2-stdlib{a} libpython2.7{a} libpython2.7-dev{a} libpython2.7-minimal{a} libpython2.7-stdlib{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libsigsegv2{a} libssl1.1{a} libtidy-dev{a} libtidy5deb1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} mime-support{a} patchutils{a} po-debconf{a} python{a} python-all{a} python-all-dev{a} python-dev{a} python-minimal{a} python2{a} python2-dev{a} python2-minimal{a} python2.7{a} python2.7-dev{a} python2.7-minimal{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 74 newly installed, 0 to remove and 0 not upgraded. Need to get 61.1 MB of archives. After unpacking 154 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf libpython2.7-minimal armhf 2.7.16-2+deb10u1 [395 kB] Get: 8 http://deb.debian.org/debian buster/main armhf python2.7-minimal armhf 2.7.16-2+deb10u1 [1171 kB] Get: 9 http://deb.debian.org/debian buster/main armhf python2-minimal armhf 2.7.16-1 [41.4 kB] Get: 10 http://deb.debian.org/debian buster/main armhf python-minimal armhf 2.7.16-1 [21.0 kB] Get: 11 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 12 http://deb.debian.org/debian buster/main armhf mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libexpat1 armhf 2.2.6-2+deb10u1 [78.0 kB] Get: 14 http://deb.debian.org/debian buster/main armhf readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main armhf libreadline7 armhf 7.0-5 [131 kB] Get: 16 http://deb.debian.org/debian buster/main armhf libpython2.7-stdlib armhf 2.7.16-2+deb10u1 [1837 kB] Get: 17 http://deb.debian.org/debian buster/main armhf python2.7 armhf 2.7.16-2+deb10u1 [305 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libpython2-stdlib armhf 2.7.16-1 [20.8 kB] Get: 19 http://deb.debian.org/debian buster/main armhf libpython-stdlib armhf 2.7.16-1 [20.8 kB] Get: 20 http://deb.debian.org/debian buster/main armhf python2 armhf 2.7.16-1 [41.6 kB] Get: 21 http://deb.debian.org/debian buster/main armhf python armhf 2.7.16-1 [22.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libpython3.7-minimal armhf 3.7.3-2+deb10u1 [582 kB] Get: 23 http://deb.debian.org/debian buster/main armhf python3.7-minimal armhf 3.7.3-2+deb10u1 [1465 kB] Get: 24 http://deb.debian.org/debian buster/main armhf python3-minimal armhf 3.7.3-1 [36.6 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libmpdec2 armhf 2.4.2-2 [69.3 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libpython3.7-stdlib armhf 3.7.3-2+deb10u1 [1660 kB] Get: 27 http://deb.debian.org/debian buster/main armhf python3.7 armhf 3.7.3-2+deb10u1 [330 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libpython3-stdlib armhf 3.7.3-1 [20.0 kB] Get: 29 http://deb.debian.org/debian buster/main armhf python3 armhf 3.7.3-1 [61.5 kB] Get: 30 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 31 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 32 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 33 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 34 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 36 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 37 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 38 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 39 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 40 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 41 http://deb.debian.org/debian buster/main armhf cdbs all 0.4.159 [83.7 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 43 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 44 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 45 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 46 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 47 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 48 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 49 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 50 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 51 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 52 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 53 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 54 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 55 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 56 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 57 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 58 http://deb.debian.org/debian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB] Get: 59 http://deb.debian.org/debian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Get: 60 http://deb.debian.org/debian buster/main armhf dh-python all 3.20190308 [99.3 kB] Get: 61 http://deb.debian.org/debian buster/main armhf libexpat1-dev armhf 2.2.6-2+deb10u1 [126 kB] Get: 62 http://deb.debian.org/debian buster/main armhf libpython2.7 armhf 2.7.16-2+deb10u1 [892 kB] Get: 63 http://deb.debian.org/debian buster/main armhf libpython2.7-dev armhf 2.7.16-2+deb10u1 [31.0 MB] Get: 64 http://deb.debian.org/debian buster/main armhf libpython2-dev armhf 2.7.16-1 [20.9 kB] Get: 65 http://deb.debian.org/debian buster/main armhf libpython-dev armhf 2.7.16-1 [20.9 kB] Get: 66 http://deb.debian.org/debian buster/main armhf libpython-all-dev armhf 2.7.16-1 [1064 B] Get: 67 http://deb.debian.org/debian buster/main armhf libtidy5deb1 armhf 2:5.6.0-10 [177 kB] Get: 68 http://deb.debian.org/debian buster/main armhf libtidy-dev armhf 2:5.6.0-10 [219 kB] Get: 69 http://deb.debian.org/debian buster/main armhf patchutils armhf 0.3.4-2 [86.2 kB] Get: 70 http://deb.debian.org/debian buster/main armhf python-all armhf 2.7.16-1 [1044 B] Get: 71 http://deb.debian.org/debian buster/main armhf python2.7-dev armhf 2.7.16-2+deb10u1 [291 kB] Get: 72 http://deb.debian.org/debian buster/main armhf python2-dev armhf 2.7.16-1 [1216 B] Get: 73 http://deb.debian.org/debian buster/main armhf python-dev armhf 2.7.16-1 [1192 B] Get: 74 http://deb.debian.org/debian buster/main armhf python-all-dev armhf 2.7.16-1 [1068 B] Fetched 61.1 MB in 5s (12.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libpython2.7-minimal:armhf. Preparing to unpack .../06-libpython2.7-minimal_2.7.16-2+deb10u1_armhf.deb ... Unpacking libpython2.7-minimal:armhf (2.7.16-2+deb10u1) ... Selecting previously unselected package python2.7-minimal. Preparing to unpack .../07-python2.7-minimal_2.7.16-2+deb10u1_armhf.deb ... Unpacking python2.7-minimal (2.7.16-2+deb10u1) ... Selecting previously unselected package python2-minimal. Preparing to unpack .../08-python2-minimal_2.7.16-1_armhf.deb ... Unpacking python2-minimal (2.7.16-1) ... Selecting previously unselected package python-minimal. Preparing to unpack .../09-python-minimal_2.7.16-1_armhf.deb ... Unpacking python-minimal (2.7.16-1) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../10-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package mime-support. Preparing to unpack .../11-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../12-libexpat1_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../14-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libpython2.7-stdlib:armhf. Preparing to unpack .../15-libpython2.7-stdlib_2.7.16-2+deb10u1_armhf.deb ... Unpacking libpython2.7-stdlib:armhf (2.7.16-2+deb10u1) ... Selecting previously unselected package python2.7. Preparing to unpack .../16-python2.7_2.7.16-2+deb10u1_armhf.deb ... Unpacking python2.7 (2.7.16-2+deb10u1) ... Selecting previously unselected package libpython2-stdlib:armhf. Preparing to unpack .../17-libpython2-stdlib_2.7.16-1_armhf.deb ... Unpacking libpython2-stdlib:armhf (2.7.16-1) ... Selecting previously unselected package libpython-stdlib:armhf. Preparing to unpack .../18-libpython-stdlib_2.7.16-1_armhf.deb ... Unpacking libpython-stdlib:armhf (2.7.16-1) ... Setting up libpython2.7-minimal:armhf (2.7.16-2+deb10u1) ... Setting up python2.7-minimal (2.7.16-2+deb10u1) ... Setting up python2-minimal (2.7.16-1) ... Selecting previously unselected package python2. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20397 files and directories currently installed.) Preparing to unpack .../python2_2.7.16-1_armhf.deb ... Unpacking python2 (2.7.16-1) ... Setting up python-minimal (2.7.16-1) ... Selecting previously unselected package python. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20430 files and directories currently installed.) Preparing to unpack .../python_2.7.16-1_armhf.deb ... Unpacking python (2.7.16-1) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../libpython3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../python3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u1) ... Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Setting up libexpat1:armhf (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20684 files and directories currently installed.) Preparing to unpack .../python3-minimal_3.7.3-1_armhf.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../libpython3.7-stdlib_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package python3.7. Preparing to unpack .../python3.7_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../libpython3-stdlib_3.7.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21096 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.3-1_armhf.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../03-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../06-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../07-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../08-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../09-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../10-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../11-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package cdbs. Preparing to unpack .../12-cdbs_0.4.159_all.deb ... Unpacking cdbs (0.4.159) ... Selecting previously unselected package libtool. Preparing to unpack .../13-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../14-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../15-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../16-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../17-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../18-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../19-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../20-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../21-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../22-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../23-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../24-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../29-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../30-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../31-dh-python_3.20190308_all.deb ... Unpacking dh-python (3.20190308) ... Selecting previously unselected package libexpat1-dev:armhf. Preparing to unpack .../32-libexpat1-dev_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1-dev:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package libpython2.7:armhf. Preparing to unpack .../33-libpython2.7_2.7.16-2+deb10u1_armhf.deb ... Unpacking libpython2.7:armhf (2.7.16-2+deb10u1) ... Selecting previously unselected package libpython2.7-dev:armhf. Preparing to unpack .../34-libpython2.7-dev_2.7.16-2+deb10u1_armhf.deb ... Unpacking libpython2.7-dev:armhf (2.7.16-2+deb10u1) ... Selecting previously unselected package libpython2-dev:armhf. Preparing to unpack .../35-libpython2-dev_2.7.16-1_armhf.deb ... Unpacking libpython2-dev:armhf (2.7.16-1) ... Selecting previously unselected package libpython-dev:armhf. Preparing to unpack .../36-libpython-dev_2.7.16-1_armhf.deb ... Unpacking libpython-dev:armhf (2.7.16-1) ... Selecting previously unselected package libpython-all-dev:armhf. Preparing to unpack .../37-libpython-all-dev_2.7.16-1_armhf.deb ... Unpacking libpython-all-dev:armhf (2.7.16-1) ... Selecting previously unselected package libtidy5deb1:armhf. Preparing to unpack .../38-libtidy5deb1_2%3a5.6.0-10_armhf.deb ... Unpacking libtidy5deb1:armhf (2:5.6.0-10) ... Selecting previously unselected package libtidy-dev:armhf. Preparing to unpack .../39-libtidy-dev_2%3a5.6.0-10_armhf.deb ... Unpacking libtidy-dev:armhf (2:5.6.0-10) ... Selecting previously unselected package patchutils. Preparing to unpack .../40-patchutils_0.3.4-2_armhf.deb ... Unpacking patchutils (0.3.4-2) ... Selecting previously unselected package python-all. Preparing to unpack .../41-python-all_2.7.16-1_armhf.deb ... Unpacking python-all (2.7.16-1) ... Selecting previously unselected package python2.7-dev. Preparing to unpack .../42-python2.7-dev_2.7.16-2+deb10u1_armhf.deb ... Unpacking python2.7-dev (2.7.16-2+deb10u1) ... Selecting previously unselected package python2-dev. Preparing to unpack .../43-python2-dev_2.7.16-1_armhf.deb ... Unpacking python2-dev (2.7.16-1) ... Selecting previously unselected package python-dev. Preparing to unpack .../44-python-dev_2.7.16-1_armhf.deb ... Unpacking python-dev (2.7.16-1) ... Selecting previously unselected package python-all-dev. Preparing to unpack .../45-python-all-dev_2.7.16-1_armhf.deb ... Unpacking python-all-dev (2.7.16-1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up mime-support (3.62) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up patchutils (0.3.4-2) ... Setting up autotools-dev (20180224.1) ... Setting up libexpat1-dev:armhf (2.2.6-2+deb10u1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libtidy5deb1:armhf (2:5.6.0-10) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up cdbs (0.4.159) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libreadline7:armhf (7.0-5) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up libtidy-dev:armhf (2:5.6.0-10) ... Setting up libpython2.7-stdlib:armhf (2.7.16-2+deb10u1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libpython3-stdlib:armhf (3.7.3-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u1) ... Setting up libpython2.7:armhf (2.7.16-2+deb10u1) ... Setting up libpython2.7-dev:armhf (2.7.16-2+deb10u1) ... Setting up gettext (0.19.8.1-9) ... Setting up python2.7 (2.7.16-2+deb10u1) ... Setting up libpython2-stdlib:armhf (2.7.16-1) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up python2 (2.7.16-1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libpython-stdlib:armhf (2.7.16-1) ... Setting up libpython2-dev:armhf (2.7.16-1) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up python (2.7.16-1) ... Setting up python2.7-dev (2.7.16-2+deb10u1) ... Setting up python3-distutils (3.7.3-1) ... Setting up dh-python (3.20190308) ... Setting up python2-dev (2.7.16-1) ... Setting up po-debconf (1.0.21) ... Setting up python-all (2.7.16-1) ... Setting up libpython-dev:armhf (2.7.16-1) ... Setting up python-dev (2.7.16-1) ... Setting up libpython-all-dev:armhf (2.7.16-1) ... Setting up python-all-dev (2.7.16-1) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/elementtidy-1.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package elementtidy dpkg-buildpackage: info: source version 1.0-8 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andrey Rahmatullin dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean CDBS WARNING: simple-patchsys.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead test -x debian/rules /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory '/build/elementtidy-1.0' CDBS WARNING: simple-patchsys.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead make[1]: 'reverse-config' is up to date. make[1]: Leaving directory '/build/elementtidy-1.0' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/01_setuppy.patch debian/patches/02_python25_etree.patch Patch debian/patches/02_python25_etree.patch is not applied. Patch debian/patches/01_setuppy.patch is not applied. if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done dh_clean dh_clean: Compatibility levels before 9 are deprecated (level 5 in use) cd . && python setup.py clean -a; running clean 'build/lib.linux-armv7l-2.7' does not exist -- can't clean it 'build/bdist.linux-armv7l' does not exist -- can't clean it 'build/scripts-2.7' does not exist -- can't clean it rm -rf debian/python-module-stampdir find "/build/elementtidy-1.0" -name '*.py[co]' -delete find "/build/elementtidy-1.0" -name __pycache__ -type d -empty -delete find "/build/elementtidy-1.0" -prune -name '*.egg-info' -exec rm -rf '{}' ';' debian/rules build CDBS WARNING: simple-patchsys.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead test -x debian/rules mkdir -p "." mkdir -p debian/python-module-stampdir /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory '/build/elementtidy-1.0' CDBS WARNING: simple-patchsys.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead make[1]: 'reverse-config' is up to date. make[1]: Leaving directory '/build/elementtidy-1.0' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/01_setuppy.patch debian/patches/02_python25_etree.patch Trying patch debian/patches/01_setuppy.patch at level 1 ... success. Trying patch debian/patches/02_python25_etree.patch at level 1 ... success. if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi make[1]: Entering directory '/build/elementtidy-1.0' CDBS WARNING: simple-patchsys.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead make[1]: 'update-config' is up to date. make[1]: Leaving directory '/build/elementtidy-1.0' set -e; cd . && python setup.py build --build-base="/build/elementtidy-1.0/./build"; running build running build_py creating /build/elementtidy-1.0/build creating /build/elementtidy-1.0/build/lib.linux-armv7l-2.7 creating /build/elementtidy-1.0/build/lib.linux-armv7l-2.7/elementtidy copying elementtidy/TidyHTMLTreeBuilder.py -> /build/elementtidy-1.0/./build/lib.linux-armv7l-2.7/elementtidy copying elementtidy/__init__.py -> /build/elementtidy-1.0/./build/lib.linux-armv7l-2.7/elementtidy running build_ext building '_elementtidy' extension creating /build/elementtidy-1.0/build/temp.linux-armv7l-2.7 arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -Wdate-time -D_FORTIFY_SOURCE=2 -g -fdebug-prefix-map=/build/python2.7-RT6aMn/python2.7-2.7.16=. -fstack-protector-strong -Wformat -Werror=format-security -fPIC -DNDEBUG -I/usr/include/tidy -I/usr/include/python2.7 -c _elementtidy.c -o /build/elementtidy-1.0/./build/temp.linux-armv7l-2.7/_elementtidy.o In file included from _elementtidy.c:41: /usr/include/tidy/buffio.h:9:2: warning: #warning "FIXME: Using compatibility tidy header (buffio.h) that will go away! Use tidybuffio.h" [-Wcpp] #warning "FIXME: Using compatibility tidy header (buffio.h) that will go away! Use tidybuffio.h" ^~~~~~~ _elementtidy.c: In function 'elementtidy_fixup': _elementtidy.c:106:49: warning: pointer type mismatch in conditional expression pyout = PyString_FromString(out.bp ? out.bp : ""); ^ _elementtidy.c:109:49: warning: pointer type mismatch in conditional expression pyerr = PyString_FromString(err.bp ? err.bp : ""); ^ _elementtidy.c: At top level: _elementtidy.c:140:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] init_elementtidy() ^~~~~~~~~~~~~~~~ arm-linux-gnueabihf-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -g -fdebug-prefix-map=/build/python2.7-RT6aMn/python2.7-2.7.16=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wdate-time -D_FORTIFY_SOURCE=2 -g -fdebug-prefix-map=/build/python2.7-RT6aMn/python2.7-2.7.16=. -fstack-protector-strong -Wformat -Werror=format-security /build/elementtidy-1.0/./build/temp.linux-armv7l-2.7/_elementtidy.o -ltidy -o /build/elementtidy-1.0/./build/lib.linux-armv7l-2.7/_elementtidy.so touch debian/python-module-stampdir/python-elementtidy fakeroot debian/rules binary CDBS WARNING: simple-patchsys.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead test -x debian/rules dh_testroot dh_clean -k dh_clean: Compatibility levels before 9 are deprecated (level 5 in use) dh_clean: dh_clean -k is deprecated; use dh_prep instead dh_clean: This feature will be removed in compat 12. dh_installdirs -A dh_installdirs: Compatibility levels before 9 are deprecated (level 5 in use) mkdir -p "." mkdir -p debian/python-module-stampdir set -e; cd . && python setup.py build --build-base="/build/elementtidy-1.0/./build"; running build running build_py running build_ext touch debian/python-module-stampdir/python-elementtidy Adding cdbs dependencies to debian/python-elementtidy.substvars dh_installdirs -ppython-elementtidy \ dh_installdirs: Compatibility levels before 9 are deprecated (level 5 in use) set -e; cd . && python setup.py install --root="/build/elementtidy-1.0/debian/python-elementtidy/" --install-layout=deb --no-compile -O0; running install running build running build_py running build_ext running install_lib creating /build/elementtidy-1.0/debian/python-elementtidy/usr creating /build/elementtidy-1.0/debian/python-elementtidy/usr/lib creating /build/elementtidy-1.0/debian/python-elementtidy/usr/lib/python2.7 creating /build/elementtidy-1.0/debian/python-elementtidy/usr/lib/python2.7/dist-packages copying build/lib.linux-armv7l-2.7/_elementtidy.so -> /build/elementtidy-1.0/debian/python-elementtidy/usr/lib/python2.7/dist-packages creating /build/elementtidy-1.0/debian/python-elementtidy/usr/lib/python2.7/dist-packages/elementtidy copying build/lib.linux-armv7l-2.7/elementtidy/TidyHTMLTreeBuilder.py -> /build/elementtidy-1.0/debian/python-elementtidy/usr/lib/python2.7/dist-packages/elementtidy copying build/lib.linux-armv7l-2.7/elementtidy/__init__.py -> /build/elementtidy-1.0/debian/python-elementtidy/usr/lib/python2.7/dist-packages/elementtidy running install_egg_info Writing /build/elementtidy-1.0/debian/python-elementtidy/usr/lib/python2.7/dist-packages/elementtidy-1.0_20050212.egg-info dh_installdocs -ppython-elementtidy ./README dh_installdocs: Compatibility levels before 9 are deprecated (level 5 in use) dh_installexamples -ppython-elementtidy dh_installexamples: Compatibility levels before 9 are deprecated (level 5 in use) dh_installman -ppython-elementtidy dh_installman: Compatibility levels before 9 are deprecated (level 5 in use) dh_installinfo -ppython-elementtidy dh_installinfo: Compatibility levels before 9 are deprecated (level 5 in use) dh_installmenu -ppython-elementtidy dh_installcron -ppython-elementtidy dh_systemd_enable -ppython-elementtidy dh_systemd_enable: Compatibility levels before 9 are deprecated (level 5 in use) dh_installinit -ppython-elementtidy dh_installinit: Compatibility levels before 9 are deprecated (level 5 in use) dh_installdebconf -ppython-elementtidy dh_installemacsen -ppython-elementtidy dh_installcatalogs -ppython-elementtidy dh_installpam -ppython-elementtidy dh_installlogrotate -ppython-elementtidy dh_installlogcheck -ppython-elementtidy dh_installchangelogs -ppython-elementtidy dh_installchangelogs: Compatibility levels before 9 are deprecated (level 5 in use) dh_installudev -ppython-elementtidy dh_lintian -ppython-elementtidy dh_bugfiles -ppython-elementtidy dh_install -ppython-elementtidy dh_install: Compatibility levels before 9 are deprecated (level 5 in use) dh_systemd_start -ppython-elementtidy dh_systemd_start: Compatibility levels before 9 are deprecated (level 5 in use) dh_link -ppython-elementtidy dh_installmime -ppython-elementtidy dh_installgsettings -ppython-elementtidy dh_python2 -ppython-elementtidy I: dh_python2 fs:343: renaming _elementtidy.so to _elementtidy.arm-linux-gnueabihf.so dh_strip -ppython-elementtidy dh_strip: Compatibility levels before 9 are deprecated (level 5 in use) dh_strip_nondeterminism -ppython-elementtidy dh_compress -ppython-elementtidy dh_compress: Compatibility levels before 9 are deprecated (level 5 in use) dh_fixperms -ppython-elementtidy dh_makeshlibs -ppython-elementtidy dh_makeshlibs: Compatibility levels before 9 are deprecated (level 5 in use) dh_installdeb -ppython-elementtidy dh_installdeb: Compatibility levels before 9 are deprecated (level 5 in use) dh_perl -ppython-elementtidy dh_shlibdeps -ppython-elementtidy dh_shlibdeps: Compatibility levels before 9 are deprecated (level 5 in use) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/python-elementtidy/usr/lib/python2.7/dist-packages/_elementtidy.arm-linux-gnueabihf.so was not linked against libpthread.so.0 (it uses none of the library's symbols) dh_gencontrol -ppython-elementtidy dpkg-gencontrol: warning: package python-elementtidy: substitution variable ${python:Versions} unused, but is defined dpkg-gencontrol: warning: package python-elementtidy: substitution variable ${python:Versions} unused, but is defined dh_md5sums -ppython-elementtidy dh_builddeb -ppython-elementtidy dpkg-deb: building package 'python-elementtidy' in '../python-elementtidy_1.0-8_armhf.deb'. dpkg-deb: building package 'python-elementtidy-dbgsym' in '../python-elementtidy-dbgsym_1.0-8_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../elementtidy_1.0-8_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/20419 and its subdirectories I: Current time: Fri May 15 00:52:12 -12 2020 I: pbuilder-time-stamp: 1589547132 Fri May 15 12:52:19 UTC 2020 I: 1st build successful. Starting 2nd build on remote node ff4a-armhf-rb.debian.net. Fri May 15 12:52:19 UTC 2020 I: Preparing to do remote build '2' on ff4a-armhf-rb.debian.net. Fri May 15 12:54:40 UTC 2020 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. Fri May 15 12:54:43 UTC 2020 I: elementtidy_1.0-8_armhf.changes: Format: 1.8 Date: Thu, 20 Aug 2015 01:35:50 +0500 Source: elementtidy Binary: python-elementtidy python-elementtidy-dbgsym Architecture: armhf Version: 1.0-8 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team Changed-By: Andrey Rahmatullin Description: python-elementtidy - An HTML tree builder for ElementTree based on Tidy Closes: 786087 Changes: elementtidy (1.0-8) unstable; urgency=low . * Team upload . [ Jakub Wilk ] * Use canonical URIs for Vcs-* fields. * Drop obsolete Conflicts/Replaces with python2.3-elementtidy and python2.4-elementtidy. . [ Andrey Rahmatullin ] * Drop debian/pycompat * Convert from dh_pysupport to dh_python2 (Closes: #786087) - replace python-support with dh-python in Build-Depends Checksums-Sha1: 99a9a9a5a67871d308a2ff6a673f43fb996bcab8 5841 elementtidy_1.0-8_armhf.buildinfo dd1a0256836aed07e1579618d501c5e347a635fe 13364 python-elementtidy-dbgsym_1.0-8_armhf.deb 7e01ad0ef16df26dc2b7a365ab3a8385fc404d5d 10276 python-elementtidy_1.0-8_armhf.deb Checksums-Sha256: 35b05833d82a9fdfabed552368a833592e8445abcdcd3e799712dd8d83a85bd7 5841 elementtidy_1.0-8_armhf.buildinfo 5bc456e98b8937c24227ddb69c171c3d41b11c354d4d7a5f9c5138ae9ef616cc 13364 python-elementtidy-dbgsym_1.0-8_armhf.deb 2a5d0a4eafd1fc722dc4138c9e202d010370e0830b9ca43a23355fba7faac1e8 10276 python-elementtidy_1.0-8_armhf.deb Files: 8f6161962de5f2fd9b400a8d13aa5bce 5841 python optional elementtidy_1.0-8_armhf.buildinfo 005b4de942db217b81c18612585aa4a9 13364 debug optional python-elementtidy-dbgsym_1.0-8_armhf.deb a62d2211d072eb1de411e9696b3c038c 10276 python optional python-elementtidy_1.0-8_armhf.deb Fri May 15 12:54:44 UTC 2020 I: diffoscope 143 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.bD8lO3PSnC/elementtidy_1.0-8.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.bD8lO3PSnC/elementtidy_1.0-8.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.bD8lO3PSnC/elementtidy_1.0-8.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.bD8lO3PSnC/b1/elementtidy_1.0-8_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.bD8lO3PSnC/b2/elementtidy_1.0-8_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.250s) 0.250s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.020s) 0.020s 10 calls diffoscope.comparators.binary.FilesystemFile Fri May 15 12:54:45 UTC 2020 I: diffoscope 143 found no differences in the changes files, and a .buildinfo file also exists. Fri May 15 12:54:45 UTC 2020 I: elementtidy from buster built successfully and reproducibly on armhf. Fri May 15 12:54:47 UTC 2020 I: Submitting .buildinfo files to external archives: Fri May 15 12:54:47 UTC 2020 I: Submitting 8.0K b1/elementtidy_1.0-8_armhf.buildinfo.asc Fri May 15 12:54:47 UTC 2020 I: Submitting 8.0K b2/elementtidy_1.0-8_armhf.buildinfo.asc Fri May 15 12:54:48 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 15 12:54:48 UTC 2020 I: Done submitting .buildinfo files. Fri May 15 12:54:48 UTC 2020 I: Removing signed elementtidy_1.0-8_armhf.buildinfo.asc files: removed './b1/elementtidy_1.0-8_armhf.buildinfo.asc' removed './b2/elementtidy_1.0-8_armhf.buildinfo.asc'