Mon Oct 12 20:45:44 UTC 2020 I: starting to build libset-object-perl/buster/arm64 on jenkins on '2020-10-12 20:45' Mon Oct 12 20:45:44 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_31/1960/console.log Mon Oct 12 20:45:44 UTC 2020 I: Downloading source for buster/libset-object-perl=1.39-1 --2020-10-12 20:45:44-- http://deb.debian.org/debian/pool/main/libs/libset-object-perl/libset-object-perl_1.39-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2420 (2.4K) Saving to: ‘libset-object-perl_1.39-1.dsc’ 0K .. 100% 15.3M=0s 2020-10-12 20:45:44 (15.3 MB/s) - ‘libset-object-perl_1.39-1.dsc’ saved [2420/2420] Mon Oct 12 20:45:44 UTC 2020 I: libset-object-perl_1.39-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libset-object-perl Binary: libset-object-perl Architecture: any Version: 1.39-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Niko Tyni , Damyan Ivanov , Ansgar Burchardt , Peter Pentchev Homepage: https://metacpan.org/release/Set-Object Standards-Version: 4.1.3 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-perl/packages/libset-object-perl.git Vcs-Git: https://anonscm.debian.org/git/pkg-perl/packages/libset-object-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 10), perl, libmoose-perl, libtest-leaktrace-perl, libtest-pod-perl, libtest-pod-coverage-perl Package-List: libset-object-perl deb perl optional arch=any Checksums-Sha1: 958da69bfa1ff14656aca21722a39eefd260b840 80902 libset-object-perl_1.39.orig.tar.gz 601a57ef30742a790b6391317f8a24ab6d0c6d24 5424 libset-object-perl_1.39-1.debian.tar.xz Checksums-Sha256: 5effcfeb104da334f413a20dee9cdc5e874246096c3b282190a5f44453401810 80902 libset-object-perl_1.39.orig.tar.gz ef6e91d2cccaca8e42488602b92e8f860badaf3ca8007a4f84e5e2cb3d8ded0a 5424 libset-object-perl_1.39-1.debian.tar.xz Files: 21571b7e6e3fcd4089ce640e048760de 80902 libset-object-perl_1.39.orig.tar.gz 0847bf64327f05b15d30f7fe54ce5dbd 5424 libset-object-perl_1.39-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAlpY9J1fFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgaL+Q/9EODsIP+06UvZMYstD/OjfdwAHVbqVn/w6+uDH2LImk2ilJiqA28dhzGH oszUCrz/s4xiBvfLgmQZmfRRkOJYtkiJcP7zNkqUXPNoLlnykmf+ryU4gYFrwkY4 DLisRAMa37QIP7rWJun9eQSO4U+deOyGHNt8wJ/lqkRYlqZTlgMH5XUGgRNTAtUZ DtyiPYfZIPrCZyWLW3QEqgWomzDSP6sUN8/mkHIWgtIp776Ye+ebA4zv9+GXHMez ImcXfNeEJCX3CXbLGujVyjdb/MT/9b1mOXwxpK8v1lsDpOG5c3a4JcKc2dQWxrXO nx/Bs0ki0IsvMp1g9ZzB+Db4RYNRIr5eORYXyZtqidD0WxgBYJlfHUV/9Uxdc/s5 wr8n8+Gc4XQHs0W+TbrgE5p3iK4G+WwPYW9JUGMABVZM5b3M8t3scy+uflSSJKfC ujbpS5YypdjLG8PTCZLLA4HZXWQhB+eRa0Rz5EtjX0g1a5V8kekMm7USfWLsSqyQ TNyXeaZMJxhkzTN7XUdahWNesIt+vBBulPn33D8S4p0IPnRQ+8eGbOakhExfvHti 7ebvtfjhh0AlDGInf9DSUJXQ2UKNzrksZjDJFbbwPvSn5qfhP1GauHd80nMDgkcp 8pHu+EMo6r/KFnTrQXrcSmOb6vdAfc35rezMTFwJyRPoLk37RsA= =/2oe -----END PGP SIGNATURE----- Mon Oct 12 20:45:44 UTC 2020 I: Checking whether the package is not for us Mon Oct 12 20:45:44 UTC 2020 I: Starting 1st build on remote node codethink-sled16-arm64.debian.net. Mon Oct 12 20:45:44 UTC 2020 I: Preparing to do remote build '1' on codethink-sled16-arm64.debian.net. Mon Oct 12 20:46:39 UTC 2020 I: Deleting $TMPDIR on codethink-sled16-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Oct 12 08:45:57 -12 2020 I: pbuilder-time-stamp: 1602535557 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libset-object-perl_1.39-1.dsc] I: copying [./libset-object-perl_1.39.orig.tar.gz] I: copying [./libset-object-perl_1.39-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/var/lib/jenkins/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Fri Jan 12 05:47:09 2018 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libset-object-perl_1.39-1.dsc dpkg-source: info: extracting libset-object-perl in libset-object-perl-1.39 dpkg-source: info: unpacking libset-object-perl_1.39.orig.tar.gz dpkg-source: info: unpacking libset-object-perl_1.39-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying typos.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/16303/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=8' DISTRIBUTION='' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='16303' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.xdllC6nymU/pbuilderrc_SgIu --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.xdllC6nymU/b1 --logfile b1/build.log libset-object-perl_1.39-1.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink-sled16-arm64 4.4.0-190-generic #220-Ubuntu SMP Fri Aug 28 23:03:33 UTC 2020 aarch64 GNU/Linux I: ls -l /bin total 4928 -rwxr-xr-x 1 root root 1216928 Apr 17 2019 bash -rwxr-xr-x 3 root root 34808 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 34808 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 34808 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 14264 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 35576 Feb 28 2019 cat -rwxr-xr-x 1 root root 60256 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 56096 Feb 28 2019 chmod -rwxr-xr-x 1 root root 64368 Feb 28 2019 chown -rwxr-xr-x 1 root root 134632 Feb 28 2019 cp -rwxr-xr-x 1 root root 129536 Jan 17 2019 dash -rwxr-xr-x 1 root root 97136 Feb 28 2019 date -rwxr-xr-x 1 root root 76736 Feb 28 2019 dd -rwxr-xr-x 1 root root 93752 Feb 28 2019 df -rwxr-xr-x 1 root root 138848 Feb 28 2019 dir -rwxr-xr-x 1 root root 75984 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 31368 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 27256 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 68792 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 34824 Apr 22 07:38 fusermount -rwxr-xr-x 1 root root 174304 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 89656 Jan 5 2019 gzip -rwxr-xr-x 1 root root 18440 Sep 26 2018 hostname -rwxr-xr-x 1 root root 64472 Feb 28 2019 ln -rwxr-xr-x 1 root root 52544 Jul 26 2018 login -rwxr-xr-x 1 root root 138848 Feb 28 2019 ls -rwxr-xr-x 1 root root 108552 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 76840 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 64480 Feb 28 2019 mknod -rwxr-xr-x 1 root root 39736 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 38840 Jan 9 2019 more -rwsr-xr-x 1 root root 47112 Jan 9 2019 mount -rwxr-xr-x 1 root root 14344 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 138736 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 35560 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 43712 Feb 28 2019 readlink -rwxr-xr-x 1 root root 68440 Feb 28 2019 rm -rwxr-xr-x 1 root root 39624 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 19144 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 114016 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Oct 6 20:25 sh -> dash -rwxr-xr-x 1 root root 31384 Feb 28 2019 sleep -rwxr-xr-x 1 root root 72480 Feb 28 2019 stty -rwsr-xr-x 1 root root 59424 Jan 9 2019 su -rwxr-xr-x 1 root root 31416 Feb 28 2019 sync -rwxr-xr-x 1 root root 449416 Apr 23 2019 tar -rwxr-xr-x 1 root root 10560 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 88968 Feb 28 2019 touch -rwxr-xr-x 1 root root 27256 Feb 28 2019 true -rwxr-xr-x 1 root root 14264 Apr 22 07:38 ulockmgr_server -rwsr-xr-x 1 root root 30728 Jan 9 2019 umount -rwxr-xr-x 1 root root 31384 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 138848 Feb 28 2019 vdir -rwxr-xr-x 1 root root 34824 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/16303/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10), perl, libmoose-perl, libtest-leaktrace-perl, libtest-pod-perl, libtest-pod-coverage-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19168 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libmoose-perl; however: Package libmoose-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-leaktrace-perl; however: Package libtest-leaktrace-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libalgorithm-c3-perl{a} libarchive-zip-perl{a} libb-hooks-op-check-perl{a} libbsd0{a} libclass-c3-perl{a} libclass-load-perl{a} libclass-load-xs-perl{a} libcroco3{a} libdata-optlist-perl{a} libdevel-callchecker-perl{a} libdevel-globaldestruction-perl{a} libdevel-overloadinfo-perl{a} libdevel-stacktrace-perl{a} libdevel-symdump-perl{a} libdist-checkconflicts-perl{a} libdynaloader-functions-perl{a} libelf1{a} libeval-closure-perl{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libmodule-implementation-perl{a} libmodule-runtime-conflicts-perl{a} libmodule-runtime-perl{a} libmoose-perl{a} libmro-compat-perl{a} libncurses6{a} libpackage-deprecationmanager-perl{a} libpackage-stash-perl{a} libpackage-stash-xs-perl{a} libparams-classify-perl{a} libparams-util-perl{a} libpipeline1{a} libpod-coverage-perl{a} libsigsegv2{a} libsub-exporter-perl{a} libsub-exporter-progressive-perl{a} libsub-identify-perl{a} libsub-install-perl{a} libsub-name-perl{a} libtest-leaktrace-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libclass-c3-xs-perl libdevel-lexalias-perl libdevel-partialdump-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 67 newly installed, 0 to remove and 0 not upgraded. Need to get 19.9 MB of archives. After unpacking 73.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main arm64 libbsd0 arm64 0.9.1-2 [97.4 kB] Get: 2 http://deb.debian.org/debian buster/main arm64 bsdmainutils arm64 11.1.2+b1 [185 kB] Get: 3 http://deb.debian.org/debian buster/main arm64 libuchardet0 arm64 0.0.6-3 [65.0 kB] Get: 4 http://deb.debian.org/debian buster/main arm64 groff-base arm64 1.22.4-3 [869 kB] Get: 5 http://deb.debian.org/debian buster/main arm64 libpipeline1 arm64 1.5.1-2 [29.8 kB] Get: 6 http://deb.debian.org/debian buster/main arm64 man-db arm64 2.8.5-2 [1258 kB] Get: 7 http://deb.debian.org/debian buster/main arm64 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main arm64 libmagic-mgc arm64 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main arm64 libmagic1 arm64 1:5.35-4+deb10u1 [115 kB] Get: 10 http://deb.debian.org/debian buster/main arm64 file arm64 1:5.35-4+deb10u1 [66.4 kB] Get: 11 http://deb.debian.org/debian buster/main arm64 gettext-base arm64 0.19.8.1-9 [120 kB] Get: 12 http://deb.debian.org/debian buster/main arm64 libsigsegv2 arm64 2.12-2 [32.3 kB] Get: 13 http://deb.debian.org/debian buster/main arm64 m4 arm64 1.4.18-2 [198 kB] Get: 14 http://deb.debian.org/debian buster/main arm64 autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main arm64 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main arm64 automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main arm64 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main arm64 libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main arm64 dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main arm64 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main arm64 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main arm64 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main arm64 libelf1 arm64 0.176-1.1 [160 kB] Get: 24 http://deb.debian.org/debian buster/main arm64 dwz arm64 0.12-3 [71.7 kB] Get: 25 http://deb.debian.org/debian buster/main arm64 libglib2.0-0 arm64 2.58.3-2+deb10u2 [1185 kB] Get: 26 http://deb.debian.org/debian buster/main arm64 libicu63 arm64 63.1-6+deb10u1 [8151 kB] Get: 27 http://deb.debian.org/debian buster/main arm64 libxml2 arm64 2.9.4+dfsg1-7+b3 [623 kB] Get: 28 http://deb.debian.org/debian buster/main arm64 libcroco3 arm64 0.6.12-3 [140 kB] Get: 29 http://deb.debian.org/debian buster/main arm64 libncurses6 arm64 6.1+20181013-2+deb10u2 [92.6 kB] Get: 30 http://deb.debian.org/debian buster/main arm64 gettext arm64 0.19.8.1-9 [1261 kB] Get: 31 http://deb.debian.org/debian buster/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main arm64 po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main arm64 debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main arm64 libalgorithm-c3-perl all 0.10-1 [12.0 kB] Get: 35 http://deb.debian.org/debian buster/main arm64 libb-hooks-op-check-perl arm64 0.22-1+b1 [11.4 kB] Get: 36 http://deb.debian.org/debian buster/main arm64 libclass-c3-perl all 0.34-1 [22.4 kB] Get: 37 http://deb.debian.org/debian buster/main arm64 libparams-util-perl arm64 1.07-3+b4 [22.5 kB] Get: 38 http://deb.debian.org/debian buster/main arm64 libsub-install-perl all 0.928-1 [11.4 kB] Get: 39 http://deb.debian.org/debian buster/main arm64 libdata-optlist-perl all 0.110-1 [10.6 kB] Get: 40 http://deb.debian.org/debian buster/main arm64 libdynaloader-functions-perl all 0.003-1 [12.6 kB] Get: 41 http://deb.debian.org/debian buster/main arm64 libdevel-callchecker-perl arm64 0.008-1 [15.6 kB] Get: 42 http://deb.debian.org/debian buster/main arm64 libparams-classify-perl arm64 0.015-1+b1 [25.4 kB] Get: 43 http://deb.debian.org/debian buster/main arm64 libmodule-runtime-perl all 0.016-1 [19.4 kB] Get: 44 http://deb.debian.org/debian buster/main arm64 libtry-tiny-perl all 0.30-1 [23.3 kB] Get: 45 http://deb.debian.org/debian buster/main arm64 libmodule-implementation-perl all 0.09-1 [12.9 kB] Get: 46 http://deb.debian.org/debian buster/main arm64 libpackage-stash-perl all 0.38-1 [21.7 kB] Get: 47 http://deb.debian.org/debian buster/main arm64 libclass-load-perl all 0.25-1 [16.1 kB] Get: 48 http://deb.debian.org/debian buster/main arm64 libclass-load-xs-perl arm64 0.10-1+b3 [14.8 kB] Get: 49 http://deb.debian.org/debian buster/main arm64 libsub-exporter-progressive-perl all 0.001013-1 [7588 B] Get: 50 http://deb.debian.org/debian buster/main arm64 libdevel-globaldestruction-perl all 0.14-1 [8084 B] Get: 51 http://deb.debian.org/debian buster/main arm64 libmro-compat-perl all 0.13-1 [12.2 kB] Get: 52 http://deb.debian.org/debian buster/main arm64 libsub-identify-perl arm64 0.14-1+b1 [12.0 kB] Get: 53 http://deb.debian.org/debian buster/main arm64 libdevel-overloadinfo-perl all 0.005-1 [7212 B] Get: 54 http://deb.debian.org/debian buster/main arm64 libdevel-stacktrace-perl all 2.0300-1 [28.0 kB] Get: 55 http://deb.debian.org/debian buster/main arm64 libdevel-symdump-perl all 2.18-3 [17.3 kB] Get: 56 http://deb.debian.org/debian buster/main arm64 libdist-checkconflicts-perl all 0.11-1 [10.8 kB] Get: 57 http://deb.debian.org/debian buster/main arm64 libsub-exporter-perl all 0.987-1 [47.2 kB] Get: 58 http://deb.debian.org/debian buster/main arm64 libeval-closure-perl all 0.14-1 [11.5 kB] Get: 59 http://deb.debian.org/debian buster/main arm64 libmodule-runtime-conflicts-perl all 0.003-1 [6882 B] Get: 60 http://deb.debian.org/debian buster/main arm64 libsub-name-perl arm64 0.21-1+b3 [13.4 kB] Get: 61 http://deb.debian.org/debian buster/main arm64 libpackage-deprecationmanager-perl all 0.17-1 [16.4 kB] Get: 62 http://deb.debian.org/debian buster/main arm64 libpackage-stash-xs-perl arm64 0.29-1 [19.7 kB] Get: 63 http://deb.debian.org/debian buster/main arm64 libmoose-perl arm64 2.2011-1+b1 [805 kB] Get: 64 http://deb.debian.org/debian buster/main arm64 libpod-coverage-perl all 0.23-1 [23.9 kB] Get: 65 http://deb.debian.org/debian buster/main arm64 libtest-leaktrace-perl arm64 0.16-1+b1 [20.9 kB] Get: 66 http://deb.debian.org/debian buster/main arm64 libtest-pod-coverage-perl all 1.10-2 [14.5 kB] Get: 67 http://deb.debian.org/debian buster/main arm64 libtest-pod-perl all 1.52-1 [14.2 kB] Fetched 19.9 MB in 2s (9955 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19168 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_arm64.deb ... Unpacking libbsd0:arm64 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_arm64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../02-libuchardet0_0.0.6-3_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_arm64.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../04-libpipeline1_1.5.1-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_arm64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_arm64.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_arm64.deb ... Unpacking libmagic1:arm64 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_arm64.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_arm64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:arm64. Preparing to unpack .../11-libsigsegv2_2.12-2_arm64.deb ... Unpacking libsigsegv2:arm64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_arm64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../22-libelf1_0.176-1.1_arm64.deb ... Unpacking libelf1:arm64 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_arm64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:arm64. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_arm64.deb ... Unpacking libglib2.0-0:arm64 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:arm64. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_arm64.deb ... Unpacking libicu63:arm64 (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:arm64. Preparing to unpack .../27-libcroco3_0.6.12-3_arm64.deb ... Unpacking libcroco3:arm64 (0.6.12-3) ... Selecting previously unselected package libncurses6:arm64. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_arm64.deb ... Unpacking libncurses6:arm64 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_arm64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libalgorithm-c3-perl. Preparing to unpack .../33-libalgorithm-c3-perl_0.10-1_all.deb ... Unpacking libalgorithm-c3-perl (0.10-1) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../34-libb-hooks-op-check-perl_0.22-1+b1_arm64.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b1) ... Selecting previously unselected package libclass-c3-perl. Preparing to unpack .../35-libclass-c3-perl_0.34-1_all.deb ... Unpacking libclass-c3-perl (0.34-1) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../36-libparams-util-perl_1.07-3+b4_arm64.deb ... Unpacking libparams-util-perl (1.07-3+b4) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../37-libsub-install-perl_0.928-1_all.deb ... Unpacking libsub-install-perl (0.928-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../38-libdata-optlist-perl_0.110-1_all.deb ... Unpacking libdata-optlist-perl (0.110-1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../39-libdynaloader-functions-perl_0.003-1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../40-libdevel-callchecker-perl_0.008-1_arm64.deb ... Unpacking libdevel-callchecker-perl (0.008-1) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../41-libparams-classify-perl_0.015-1+b1_arm64.deb ... Unpacking libparams-classify-perl (0.015-1+b1) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../42-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../43-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Selecting previously unselected package libmodule-implementation-perl. Preparing to unpack .../44-libmodule-implementation-perl_0.09-1_all.deb ... Unpacking libmodule-implementation-perl (0.09-1) ... Selecting previously unselected package libpackage-stash-perl. Preparing to unpack .../45-libpackage-stash-perl_0.38-1_all.deb ... Unpacking libpackage-stash-perl (0.38-1) ... Selecting previously unselected package libclass-load-perl. Preparing to unpack .../46-libclass-load-perl_0.25-1_all.deb ... Unpacking libclass-load-perl (0.25-1) ... Selecting previously unselected package libclass-load-xs-perl. Preparing to unpack .../47-libclass-load-xs-perl_0.10-1+b3_arm64.deb ... Unpacking libclass-load-xs-perl (0.10-1+b3) ... Selecting previously unselected package libsub-exporter-progressive-perl. Preparing to unpack .../48-libsub-exporter-progressive-perl_0.001013-1_all.deb ... Unpacking libsub-exporter-progressive-perl (0.001013-1) ... Selecting previously unselected package libdevel-globaldestruction-perl. Preparing to unpack .../49-libdevel-globaldestruction-perl_0.14-1_all.deb ... Unpacking libdevel-globaldestruction-perl (0.14-1) ... Selecting previously unselected package libmro-compat-perl. Preparing to unpack .../50-libmro-compat-perl_0.13-1_all.deb ... Unpacking libmro-compat-perl (0.13-1) ... Selecting previously unselected package libsub-identify-perl. Preparing to unpack .../51-libsub-identify-perl_0.14-1+b1_arm64.deb ... Unpacking libsub-identify-perl (0.14-1+b1) ... Selecting previously unselected package libdevel-overloadinfo-perl. Preparing to unpack .../52-libdevel-overloadinfo-perl_0.005-1_all.deb ... Unpacking libdevel-overloadinfo-perl (0.005-1) ... Selecting previously unselected package libdevel-stacktrace-perl. Preparing to unpack .../53-libdevel-stacktrace-perl_2.0300-1_all.deb ... Unpacking libdevel-stacktrace-perl (2.0300-1) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../54-libdevel-symdump-perl_2.18-3_all.deb ... Unpacking libdevel-symdump-perl (2.18-3) ... Selecting previously unselected package libdist-checkconflicts-perl. Preparing to unpack .../55-libdist-checkconflicts-perl_0.11-1_all.deb ... Unpacking libdist-checkconflicts-perl (0.11-1) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../56-libsub-exporter-perl_0.987-1_all.deb ... Unpacking libsub-exporter-perl (0.987-1) ... Selecting previously unselected package libeval-closure-perl. Preparing to unpack .../57-libeval-closure-perl_0.14-1_all.deb ... Unpacking libeval-closure-perl (0.14-1) ... Selecting previously unselected package libmodule-runtime-conflicts-perl. Preparing to unpack .../58-libmodule-runtime-conflicts-perl_0.003-1_all.deb ... Unpacking libmodule-runtime-conflicts-perl (0.003-1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../59-libsub-name-perl_0.21-1+b3_arm64.deb ... Unpacking libsub-name-perl (0.21-1+b3) ... Selecting previously unselected package libpackage-deprecationmanager-perl. Preparing to unpack .../60-libpackage-deprecationmanager-perl_0.17-1_all.deb ... Unpacking libpackage-deprecationmanager-perl (0.17-1) ... Selecting previously unselected package libpackage-stash-xs-perl. Preparing to unpack .../61-libpackage-stash-xs-perl_0.29-1_arm64.deb ... Unpacking libpackage-stash-xs-perl (0.29-1) ... Selecting previously unselected package libmoose-perl. Preparing to unpack .../62-libmoose-perl_2.2011-1+b1_arm64.deb ... Unpacking libmoose-perl (2.2011-1+b1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../63-libpod-coverage-perl_0.23-1_all.deb ... Unpacking libpod-coverage-perl (0.23-1) ... Selecting previously unselected package libtest-leaktrace-perl. Preparing to unpack .../64-libtest-leaktrace-perl_0.16-1+b1_arm64.deb ... Unpacking libtest-leaktrace-perl (0.16-1+b1) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../65-libtest-pod-coverage-perl_1.10-2_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-2) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../66-libtest-pod-perl_1.52-1_all.deb ... Unpacking libtest-pod-perl (1.52-1) ... Setting up libpipeline1:arm64 (1.5.1-2) ... Setting up libdynaloader-functions-perl (0.003-1) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libsub-identify-perl (0.14-1+b1) ... Setting up libglib2.0-0:arm64 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libtest-pod-perl (1.52-1) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up libmagic1:arm64 (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:arm64 (63.1-6+deb10u1) ... Setting up libsub-install-perl (0.928-1) ... Setting up libtest-leaktrace-perl (0.16-1+b1) ... Setting up libpackage-stash-xs-perl (0.29-1) ... Setting up autotools-dev (20180224.1) ... Setting up libalgorithm-c3-perl (0.10-1) ... Setting up libncurses6:arm64 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:arm64 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libb-hooks-op-check-perl (0.22-1+b1) ... Setting up libparams-util-perl (1.07-3+b4) ... Setting up libsub-exporter-progressive-perl (0.001013-1) ... Setting up libsub-name-perl (0.21-1+b3) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:arm64 (0.0.6-3) ... Setting up libdevel-globaldestruction-perl (0.14-1) ... Setting up libdevel-stacktrace-perl (2.0300-1) ... Setting up libdevel-symdump-perl (2.18-3) ... Setting up libbsd0:arm64 (0.9.1-2) ... Setting up libelf1:arm64 (0.176-1.1) ... Setting up libxml2:arm64 (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up libpod-coverage-perl (0.23-1) ... Setting up m4 (1.4.18-2) ... Setting up libclass-c3-perl (0.34-1) ... Setting up libdevel-callchecker-perl (0.008-1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libdata-optlist-perl (0.110-1) ... Setting up libcroco3:arm64 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libmro-compat-perl (0.13-1) ... Setting up libtest-pod-coverage-perl (1.10-2) ... Setting up libsub-exporter-perl (0.987-1) ... Setting up libeval-closure-perl (0.14-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up libparams-classify-perl (0.015-1+b1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up libdist-checkconflicts-perl (0.11-1) ... Setting up libmodule-implementation-perl (0.09-1) ... Setting up libpackage-stash-perl (0.38-1) ... Setting up po-debconf (1.0.21) ... Setting up libmodule-runtime-conflicts-perl (0.003-1) ... Setting up libclass-load-perl (0.25-1) ... Setting up libpackage-deprecationmanager-perl (0.17-1) ... Setting up libdevel-overloadinfo-perl (0.005-1) ... Setting up libclass-load-xs-perl (0.10-1+b3) ... Setting up libmoose-perl (2.2011-1+b1) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libset-object-perl-1.39/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libset-object-perl dpkg-buildpackage: info: source version 1.39-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libset-object-perl-1.39=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libset-object-perl-1.39=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Set::Object Writing MYMETA.yml and MYMETA.json debian/rules override_dh_auto_build make[1]: Entering directory '/build/libset-object-perl-1.39' dh_auto_build make -j8 make[2]: Entering directory '/build/libset-object-perl-1.39' Running Mkbootstrap for Object () "/usr/bin/perl" "/usr/share/perl/5.28/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' -typemap '/build/libset-object-perl-1.39/typemap' Object.xs > Object.xsc chmod 644 "Object.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Object.bs blib/arch/auto/Set/Object/Object.bs 644 cp Changes.pod blib/lib/Set/Changes.pod cp lib/Set/Object/Weak.pm blib/lib/Set/Object/Weak.pm cp lib/Set/Object.pm blib/lib/Set/Object.pm AutoSplitting blib/lib/Set/Object.pm (blib/lib/auto/Set/Object) mv Object.xsc Object.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libset-object-perl-1.39=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.39\" -DXS_VERSION=\"1.39\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.28/CORE" Object.c rm -f blib/arch/auto/Set/Object/Object.so aarch64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libset-object-perl-1.39=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Object.o -o blib/arch/auto/Set/Object/Object.so \ \ chmod 755 blib/arch/auto/Set/Object/Object.so Manifying 3 pod documents make[2]: Leaving directory '/build/libset-object-perl-1.39' pod2text Changes.pod > CHANGES make[1]: Leaving directory '/build/libset-object-perl-1.39' dh_auto_test make -j8 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libset-object-perl-1.39' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Object.bs blib/arch/auto/Set/Object/Object.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/ingy/arrayref.t t/misc/kwalitee.t t/misc/leaks.t t/misc/leaktrace.t t/misc/manifest.t t/misc/meta.t t/misc/more_leaks.t t/misc/perl_minimum_version.t t/misc/pod.t t/misc/pod_coverage.t t/misc/segfault.t t/misc/threads.t t/misc/undef.t t/object/abuse.t t/object/clear.t t/object/difference.t t/object/equal.t t/object/flags.t t/object/includes.t t/object/insert.t t/object/intersection.t t/object/magic.t t/object/members.t t/object/properties.t t/object/refcount.t t/object/remove.t t/object/set_subclass.t t/object/storable.t t/object/subsuper.t t/object/symmetric_difference.t t/object/union.t t/object/weakref.t t/scalar/basic.t t/scalar/basic_overload.t t/scalar/boolean.t t/scalar/clear.t t/scalar/compare.t t/scalar/custom_display.t t/scalar/difference.t t/scalar/each.t t/scalar/has.t t/scalar/intersection.t t/scalar/member.t t/scalar/misc.t t/scalar/set_set.t t/scalar/storable.t t/scalar/symmdiff.t t/scalar/union.t t/scalar/unique.t t/ingy/arrayref.t ................ 1..15 ok 1 - 'set()' isa 'Set::Object' ok 2 - scalar list context ok 3 - tied array PUSH ok 4 - tied array UNSHIFT ok 5 - size right ok 6 - shift off in right order ok 7 - pop off in right order ok 8 - size still right ok 9 - array STORESIZE ok 10 - array STORE ok 11 - array STORE doesn't increase size ok 12 - array EXISTS ok 13 - array EXISTS didn't increase size ok 14 - array DELETE ok 15 - splice (and list context) ok t/misc/kwalitee.t ................ skipped: This test is only run for the module author t/misc/leaks.t ................... 1..9 ok 1 - use Set::Object; ok 2 - no flat yet ok 3 - still no flat ok 4 - aha, got something now ok 5 - and it looks like the right one ok 6 - didn't drop out of existence on weaken() ok 7 - sanity check ok 8 - we've really got the right hash ok 9 - internal hashref drops out of existence ok t/misc/leaktrace.t ............... 1..1 ok 1 - leaks 0 < 1 ok t/misc/manifest.t ................ skipped: Author tests not required for installation t/misc/meta.t .................... skipped: This test is only run for the module author t/misc/more_leaks.t .............. # linux aarch64-linux-gnu-thread-multi # perl version 5.028001 # Moose-2.2011 # Set::Object-1.39 # Test::LeakTrace-0.16 ok 1 - Testing Set::Object for leaking (leaks 0 <= 0) ok 2 - Testing Set::Object::Weak for leaking (leaks 0 <= 0) 1..2 ok t/misc/perl_minimum_version.t .... skipped: Author tests not required for installation t/misc/pod.t ..................... 1..3 ok 1 - POD test for blib/lib/Set/Object.pm ok 2 - POD test for blib/lib/Set/Changes.pod ok 3 - POD test for blib/lib/Set/Object/Weak.pm ok t/misc/pod_coverage.t ............ 1..2 ok 1 - Set::Object, except the functions we know are private ok 2 - Set::Object::Weak, with all-caps functions as privates ok t/misc/segfault.t ................ 1..1 ok 1 ok Attempt to free nonexistent shared string '3', Perl interpreter: 0xaaab0c1f8720 at t/misc/threads.t line 56. Attempt to free nonexistent shared string '4', Perl interpreter: 0xaaab0c1f8720 at t/misc/threads.t line 56. Attempt to free nonexistent shared string '5', Perl interpreter: 0xaaab0c1f8720 at t/misc/threads.t line 56. Attempt to free nonexistent shared string '6', Perl interpreter: 0xaaab0c1f8720 at t/misc/threads.t line 56. Attempt to free nonexistent shared string '7', Perl interpreter: 0xaaab0c1f8720 at t/misc/threads.t line 56. Attempt to free nonexistent shared string '8', Perl interpreter: 0xaaab0c1f8720 at t/misc/threads.t line 56. Attempt to free nonexistent shared string '9', Perl interpreter: 0xaaab0c1f8720 at t/misc/threads.t line 56. Unbalanced string table refcount: (1) for "6" during global destruction. Unbalanced string table refcount: (1) for "8" during global destruction. Unbalanced string table refcount: (1) for "7" during global destruction. Unbalanced string table refcount: (1) for "3" during global destruction. Unbalanced string table refcount: (1) for "4" during global destruction. Unbalanced string table refcount: (1) for "5" during global destruction. Unbalanced string table refcount: (1) for "9" during global destruction. t/misc/threads.t ................. 1..2 ok 1 not ok 2 # TODO Set::Object has still refcount issues with threads RT#22760 # Failed (TODO) test at t/misc/threads.t line 43. # got: undef # expected: '5' ok t/misc/undef.t ................... ok 1 - didn't segfault removing undef from an empty set ok 2 - set ignores undef as a member ok 3 - undef can never exist in a set ok 4 - undef is never included in a set 1..4 ok t/object/abuse.t ................. 1..20 ok 1 - as_string ok 2 - == operator ok 3 - equal method ok 4 - != operator ok 5 - not_equal method ok 6 - union method ok 7 - * operator ok 8 - intersection method ok 9 - - operator ok 10 - difference ok 11 - % operator ok 12 - symmetric_difference ok 13 - < operator ok 14 - proper_subset ok 15 - <= operator ok 16 - subset ok 17 - > operator ok 18 - proper_superset ok 19 - >= operator ok 20 - superset ok t/object/clear.t ................. 1..2 ok 1 ok 2 ok t/object/difference.t ............ 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/object/equal.t ................. 1..4 ok 1 ok 2 ok 3 ok 4 ok t/object/flags.t ................. 1..2 ok 1 ok 2 ok t/object/includes.t .............. 1..7 ok 1 - Set::Object->includes() ok 2 - Set::Object->includes(single) ok 3 - Set::Object->includes(many) ok 4 - !Set::Object->includes(non-member) ok 5 - !Set::Object->includes(members, non-member) ok 6 - !Set::Object->includes(Set::Object->new()) ok 7 - !Set::Object->includes('bogon') ok t/object/insert.t ................ 1..18 ok 1 - Set::Object->size() [ no contents ] ok 2 - Set::Object->insert() [ returned \# added ] ok 3 - Set::Object->size() [ one member ] ok 4 - Set::Object->insert() [ returned \# added ] ok 5 - Set::Object->size() [ one member ] ok 6 - Set::Object->insert() [ returned \# added ] ok 7 - Set::Object->size() [ two members ] ok 8 - Set::Object->size() [ lots of inserts ] ok 9 - as_string on bogon-ified set ok 10 - Inserted an array OK ok 11 - Can put non-objects in a set ok 12 - Can put scalars in a set ok 13 - Lookup of identical item doesn't work ok 14 - Inserted an array OK ok 15 - Inserted an hash OK ok 16 - Can put non-objects in a set ok 17 - Lookup of identical item doesn't work ok 18 - Inserted an array OK ok t/object/intersection.t .......... 1..6 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 # size = 0 ok t/object/magic.t ................. 1..1 ok 1 ok t/object/members.t ............... 1..3 ok 1 ok 2 ok 3 ok t/object/properties.t ............ 1..79 ok 1 - is_int(0) ok 2 - is_int(7) ok 3 - is_key(7) ok 4 - !is_int(7.0) ok 5 - is_key(7.0) ok 6 - !is_int('7') ok 7 - is_key('7') ok 8 - !is_string() ok 9 - !is_string(7.0) ok 10 - is_string('7') ok 11 - !is_double(7) ok 12 - is_double(7.0) ok 13 - !is_double('7') ok 14 - !is_int($foo = '7') ok 15 - !is_double(7) ok 16 - !ish_int(7) ok 17 - is_int(int($foo)) ok 18 - ish_int(7) ok 19 - is_double($foo + 0) ok 20 - is_double(7) ok 21 - is_int(int($foo)) ok 22 - ish_int(7) ok 23 - !defined(ish_int(7am = '7am')) ok 24 - ish_int($foo + 0) == 7 ok 25 - is_double(7am) ok 26 - !defined(ish_int(7am)) ok 27 - !defined(ish_int(7.0 = '7.0')) ok 28 - ish_int(7.0 + 0) == 7 ok 29 - is_double(7.0) ok 30 - !defined(ish_int(7.0)) ok 31 - !defined(ish_int(7e6 = '7e6')) ok 32 - ish_int(7e6 + 0) == 7e6 ok 33 - is_double(7e6) ok 34 - !defined(ish_int(7e6)) ok 35 - !defined(ish_int(7 = '7')) ok 36 - ish_int(7 + 0) == 7 ok 37 - is_double(7) ok 38 - ish_int(7) == 7 ok 39 - !defined(ish_int(0 = '0')) ok 40 - ish_int(0 + 0) == 0 ok 41 - is_double(0) ok 42 - ish_int(0) == 7 ok 43 - !ish_int(7.000000001234) ok 44 - ish_int(7.0000000001234) == 7 ok 45 - !blessed($foo = []) ok 46 - is_key([]) ok 47 - reftype($foo) eq 'ARRAY' ok 48 - blessed($foo) eq 'This' ok 49 - reftype($foo) eq 'ARRAY' ok 50 - is_key(blessed array) ok 51 - reftype({}) ok 52 - reftype($foo) ok 53 - is_key(blessed hash) ok 54 - reftype(%foo) - tied ok 55 - reftype($tiehandle) ok 56 - Pseudonum numifies OK ok 57 - Pseudonum numifies OK ok 58 - Pseudonum stringifies OK ok 59 - Pseudonum is blessed ok 60 - ish_int(Pseudonum) ok 61 - is_key(psuedonum) ok 62 - is_key(psuedonum/hash) ok 63 - nevernum dies when numified ok 64 - nevernum dies when doublified ok 65 - nevernum stringifies OK ok 66 - nevernum is blessed ok 67 - ish_int(Nevernum) ok 68 - is_key(nevernum) ok 69 - notreallynum numifies OK ok 70 - notreallynum numifies OK ok 71 - notreallynum stringifies OK ok 72 - nevernum is blessed ok 73 - ish_int(notreallynum) ok 74 - is_key(notreallynum) ok 75 - $foo is tied ok 76 - ish_int(tied var) ok 77 - ish_int(tied var) ok 78 - is_key(tied var) ok 79 - refaddr() ok t/object/refcount.t .............. 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok t/object/remove.t ................ 1..7 ok 1 - new size correct after remove ok 2 - remove returned number of elements removed ok 3 - set contents correct ok 4 - remove of non-member didn't reduce size ok 5 - remove returned no elements removed ok 6 - remove of mixed members & non-members ok 7 - remove returned correct num of elements removed ok t/object/set_subclass.t .......... 1..4 ok 1 - 'union of SetSubClass with SetSubClass' isa 'SetSubClass' ok 2 - 'intersection of SetSubClass with SetSubClass' isa 'SetSubClass' ok 3 - 'difference of SetSubClass with SetSubClass' isa 'SetSubClass' ok 4 - 'invert of SetSubClass with SetSubClass' isa 'SetSubClass' ok t/object/storable.t .............. 1..7 ok 1 - use Set::Object; ok 2 - Storable works ok 3 - Set::Object serialises via Storable! ok 4 - thaw returned a new Set::Object ok 5 - Set::Object dclones via Storable! ok 6 - dclone returned a new Set::Object ok 7 - empty sets ok t/object/subsuper.t .............. 1..14 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok t/object/symmetric_difference.t .. 1..4 ok 1 ok 2 ok 3 ok 4 ok t/object/union.t ................. 1..10 ok 1 - union method ok 2 - op_union ok 3 - op union with ops reversed ok 4 - union with self ok 5 - union with empty set ok 6 - union method ok 7 - op_union ok 8 - op union with ops reversed ok 9 - union with self ok 10 - union with empty set ok t/object/weakref.t ............... ok 1 - sanity check 1 ok 2 - 'it's a Set::Object' isa 'Set::Object' ok 3 - but not weak ok 4 - weaken not too eager ok 5 - 'it's now a Set::Object::Weak' isa 'Set::Object::Weak' ok 6 - weaken makes refcnt lower ok 7 - Set knows that the object expired ok 8 - weakened sets can't hold temporary objects ok 9 - sanity check 2 ok 10 - sanity check 3 ok 11 - Set has size ok 12 - Set contents preserved ok 13 - weaken preserved over dclone() ok 14 - sanity check 4 ok 15 - sanity check 5 ok 16 - 'starts as a Set::Object::Weak' isa 'Set::Object::Weak' ok 17 - 'it's a Set::Object' isa 'Set::Object' ok 18 - but not weak ok 19 - ->strengthen() ok 20 - Magic detected ok 21 - Magic removed ok 22 - sanity check 6 ok 23 - sanity check 7 ok 24 - weak_set magic doesn't interfere with tie magic ok 25 - Magic detected ok 26 - hash not ruined by _dispel_magic ok 27 - Magic removed ok 28 - tie magic not interefered with by _dispel_magic ok 29 - sanity check 8 ok 30 - Magic detected ok 31 - Magic removed ok 32 - tie magic not interefered with by _dispel_magic [reverse] ok 33 - Set::Object::Weak->new() ok 34 - weak_set() ok 35 - Set::Object::weak_set ok 36 - made a weak set ok 37 - Set::Object::Weak::set() inserts its arguments ok 38 - computations on sets don't care that they're weak 1..38 ok t/scalar/basic.t ................. 1..24 ok 1 - new set size is 0 ok 2 - ->is_null() ok 3 - stringify ok 4 - ->size() [scalar] ok 5 - ->is_null() [scalar] ok 6 - stringify ok 7 - ->size() [scalar] ok 8 - ->is_null() [scalar] ok 9 - stringify ok 10 - ->size() [scalar] ok 11 - ->is_null() [scalar] ok 12 - stringify ok 13 - ->size() [scalar] ok 14 - ->is_null() [scalar] ok 15 - stringify ok 16 - ->size() [scalar] ok 17 - ->is_null() [scalar] ok 18 - stringify ok 19 - ->size() [scalar] ok 20 - ->is_null() [scalar] ok 21 - stringify ok 22 - ->size() [scalar] ok 23 - ->is_null() [scalar] ok 24 - stringify ok t/scalar/basic_overload.t ........ 1..18 ok 1 - new set size is 0 ok 2 - ->is_null() ok 3 - stringify ok 4 - ->size() ok 5 - ->is_null() ok 6 - stringify ok 7 - ->size() ok 8 - ->is_null() ok 9 - stringify ok 10 - ->size() ok 11 - ->is_null() ok 12 - stringify ok 13 - ->size() ok 14 - ->is_null() ok 15 - stringify ok 16 - ->size() ok 17 - ->is_null() ok 18 - stringify ok t/scalar/boolean.t ............... 1..2 ok 1 ok 2 - Set::Object() ok t/scalar/clear.t ................. 1..1 ok 1 ok t/scalar/compare.t ............... 1..24 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok t/scalar/custom_display.t ........ 1..7 ok 1 # Set::Object(a b c d e) ok 2 # a,b,c,d,e ok 3 # a-b-c-d-e ok 4 # Skip misplaced functionality ok 5 # Set::Object(a b c d e) ok 6 # Skip misplaced functionality ok 7 # Set::Object(a b c d e) ok t/scalar/difference.t ............ 1..28 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok t/scalar/each.t .................. skipped: TO-DO t/scalar/has.t ................... 1..3 ok 1 ok 2 ok 3 ok t/scalar/intersection.t .......... 1..20 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok t/scalar/member.t ................ 1..3 ok 1 ok 2 ok 3 ok t/scalar/misc.t .................. 1..2 ok 1 ok 2 ok t/scalar/set_set.t ............... 1..2 ok 1 ok 2 ok t/scalar/storable.t .............. 1..7 ok 1 - use Set::Object; ok 2 - Storable works ok 3 - Set::Object serialises via Storable! ok 4 - thaw returned a new Set::Object ok 5 - Set::Object dclones via Storable! ok 6 - dclone returned a new Set::Object ok 7 - empty sets ok t/scalar/symmdiff.t .............. 1..21 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok t/scalar/union.t ................. 1..16 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok t/scalar/unique.t ................ 1..4 ok 1 ok 2 ok 3 ok 4 # Set::Object() ok All tests successful. Files=49, Tests=461, 6 wallclock secs ( 0.28 usr 0.07 sys + 5.58 cusr 0.56 csys = 6.49 CPU) Result: PASS make[1]: Leaving directory '/build/libset-object-perl-1.39' create-stamp debian/debhelper-build-stamp dh_testroot dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/libset-object-perl-1.39' dh_auto_install make -j8 install DESTDIR=/build/libset-object-perl-1.39/debian/libset-object-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/libset-object-perl-1.39' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Object.bs blib/arch/auto/Set/Object/Object.bs 644 Manifying 3 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libset-object-perl-1.39/debian/libset-object-perl/usr/lib/aarch64-linux-gnu/perl5/5.28/auto/Set/Object/Object.so Installing /build/libset-object-perl-1.39/debian/libset-object-perl/usr/lib/aarch64-linux-gnu/perl5/5.28/auto/Set/Object/autosplit.ix Installing /build/libset-object-perl-1.39/debian/libset-object-perl/usr/lib/aarch64-linux-gnu/perl5/5.28/Set/Object.pm Installing /build/libset-object-perl-1.39/debian/libset-object-perl/usr/lib/aarch64-linux-gnu/perl5/5.28/Set/Object/Weak.pm Installing /build/libset-object-perl-1.39/debian/libset-object-perl/usr/share/man/man3/Set::Object::Weak.3pm Installing /build/libset-object-perl-1.39/debian/libset-object-perl/usr/share/man/man3/Set::Object.3pm Installing /build/libset-object-perl-1.39/debian/libset-object-perl/usr/share/man/man3/Set::Changes.3pm make[2]: Leaving directory '/build/libset-object-perl-1.39' rm -f -v /build/libset-object-perl-1.39/debian/libset-object-perl//usr/lib/aarch64-linux-gnu/perl5/5.28/Set/Changes.pod /build/libset-object-perl-1.39/debian/libset-object-perl/usr/share/man/man3/Set::Changes.3pm removed '/build/libset-object-perl-1.39/debian/libset-object-perl/usr/share/man/man3/Set::Changes.3pm' make[1]: Leaving directory '/build/libset-object-perl-1.39' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libset-object-perl' in '../libset-object-perl_1.39-1_arm64.deb'. dpkg-deb: building package 'libset-object-perl-dbgsym' in '../libset-object-perl-dbgsym_1.39-1_arm64.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libset-object-perl_1.39-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/16303 and its subdirectories I: Current time: Mon Oct 12 08:46:37 -12 2020 I: pbuilder-time-stamp: 1602535597 Mon Oct 12 20:46:40 UTC 2020 I: 1st build successful. Starting 2nd build on remote node codethink-sled13-arm64.debian.net. Mon Oct 12 20:46:40 UTC 2020 I: Preparing to do remote build '2' on codethink-sled13-arm64.debian.net. Mon Oct 12 20:47:57 UTC 2020 I: Deleting $TMPDIR on codethink-sled13-arm64.debian.net. Mon Oct 12 20:47:59 UTC 2020 I: libset-object-perl_1.39-1_arm64.changes: Format: 1.8 Date: Fri, 12 Jan 2018 18:45:57 +0100 Source: libset-object-perl Binary: libset-object-perl libset-object-perl-dbgsym Architecture: arm64 Version: 1.39-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libset-object-perl - collection of objects without duplications Changes: libset-object-perl (1.39-1) unstable; urgency=medium . * Import upstream version 1.39. * Declare compliance with Debian Policy 4.1.3. * Bump debhelper compatibility level to 10. Checksums-Sha1: c7cb00b38a9751ce1a37de46f721f409f7c1dd2c 54960 libset-object-perl-dbgsym_1.39-1_arm64.deb 6f470104283022bb34d9f708a421b65dfbf61d3b 5941 libset-object-perl_1.39-1_arm64.buildinfo c2c041317cdc8b403f473f60b38b8ee935ffe4dc 39256 libset-object-perl_1.39-1_arm64.deb Checksums-Sha256: ce1ad9fa16cb855bea24e03880adc8c3832b3f161c6618d1cf8202e7818caf77 54960 libset-object-perl-dbgsym_1.39-1_arm64.deb 3d48cfd67680391ae62305f85fa8f46aa068b9944b658cf942ce212f922ea751 5941 libset-object-perl_1.39-1_arm64.buildinfo 55962e2e2998463d680f04b81ec5ec808ae78a7309c1ad2d0485165c3270b856 39256 libset-object-perl_1.39-1_arm64.deb Files: 94094a5db45fdc9152b508292f9bf782 54960 debug optional libset-object-perl-dbgsym_1.39-1_arm64.deb eb62d297b8305d9f55d70294fd6de26e 5941 perl optional libset-object-perl_1.39-1_arm64.buildinfo 5195d5d1171b54e7279bee091b77f809 39256 perl optional libset-object-perl_1.39-1_arm64.deb Mon Oct 12 20:47:59 UTC 2020 I: diffoscope 160 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.xdllC6nymU/libset-object-perl_1.39-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.xdllC6nymU/libset-object-perl_1.39-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.xdllC6nymU/libset-object-perl_1.39-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.xdllC6nymU/b1/libset-object-perl_1.39-1_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.xdllC6nymU/b2/libset-object-perl_1.39-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.205s) 0.205s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.026s) 0.026s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Mon Oct 12 20:48:01 UTC 2020 I: diffoscope 160 found no differences in the changes files, and a .buildinfo file also exists. Mon Oct 12 20:48:01 UTC 2020 I: libset-object-perl from buster built successfully and reproducibly on arm64. Mon Oct 12 20:48:02 UTC 2020 I: Submitting .buildinfo files to external archives: Mon Oct 12 20:48:02 UTC 2020 I: Submitting 8.0K b1/libset-object-perl_1.39-1_arm64.buildinfo.asc Mon Oct 12 20:48:03 UTC 2020 I: Submitting 8.0K b2/libset-object-perl_1.39-1_arm64.buildinfo.asc Mon Oct 12 20:48:04 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Mon Oct 12 20:48:04 UTC 2020 I: Done submitting .buildinfo files. Mon Oct 12 20:48:04 UTC 2020 I: Removing signed libset-object-perl_1.39-1_arm64.buildinfo.asc files: removed './b1/libset-object-perl_1.39-1_arm64.buildinfo.asc' removed './b2/libset-object-perl_1.39-1_arm64.buildinfo.asc'