Sun Jul 11 14:34:16 UTC 2021 I: starting to build splat/buster/amd64 on jenkins on '2021-07-11 14:33' Sun Jul 11 14:34:16 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_7/61477/console.log Sun Jul 11 14:34:16 UTC 2021 I: Downloading source for buster/splat=1.4.2-2 --2021-07-11 14:34:17-- http://deb.debian.org/debian/pool/main/s/splat/splat_1.4.2-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1866 (1.8K) Saving to: ‘splat_1.4.2-2.dsc’ 0K . 100% 125M=0s 2021-07-11 14:34:17 (125 MB/s) - ‘splat_1.4.2-2.dsc’ saved [1866/1866] Sun Jul 11 14:34:17 UTC 2021 I: splat_1.4.2-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: splat Binary: splat Architecture: any Version: 1.4.2-2 Maintainer: Bdale Garbee Uploaders: A. Maitland Bottoms Homepage: http://www.qsl.net/kd2bd/splat.html Standards-Version: 3.9.8 Vcs-Browser: https://salsa.debian.org/debian/splat Vcs-Git: https://salsa.debian.org/debian/splat.git Build-Depends: debhelper (>= 7.0.50~), libbz2-dev, zlib1g-dev Package-List: splat deb hamradio optional arch=any Checksums-Sha1: bbaf77f0d57a476a7d105c5a7fa4a4c9cadab7cf 356823 splat_1.4.2.orig.tar.bz2 be9e67300a6709b5db1ae14bf59da435df07cf68 3008 splat_1.4.2-2.debian.tar.xz Checksums-Sha256: 39b0b314e2e927bdf00d1eda4b9865efd128ba850305f987aec049c4fd58a29c 356823 splat_1.4.2.orig.tar.bz2 4a9c7514d3c591a445c82379d6ce14364e4b8e4633e73beeab7f7c83482674f9 3008 splat_1.4.2-2.debian.tar.xz Files: 273558999105cd51d1e46eef4a570b7d 356823 splat_1.4.2.orig.tar.bz2 63aa82a1f2b4b19c07c48af6fe6c3b36 3008 splat_1.4.2-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEhHDyCwYlkhh8unuzOpNhlsCV2UEFAlxX0TYACgkQOpNhlsCV 2UEb9Q//VfLBbTWO/F9nif0MG2moa0nF+rfakiGvl2PTPX/oaTP/R71BOO/9Yok0 Ylhvvg+/YuGPmQGKi1JzN6F0lNR3cM3H1P1Ul7jDklRpmAOZAMeBx8Ul3hqPcsmt LA3GQ43Mfof8xWF3a6VWn/rkNyTIdKS/uhMJo9j4bBE3l6e46clxJYlnYldEx3B2 jeu389kCDq/AM0a59kCEAqARMZbEoEk3yblPKmRbgr/DpCHJmVs0N4mCN07Q09ki eSxXdr1FeBA5MrE9W+Wy+Wql+ouZwAcWyJIMvHpoCjzUepRbEMvyz43fZMW3GA5t ve+vZoMsMHAYCOqi7ak1qp728IKNqs+Uf93MSnQuR0S7bfyVZoipxEpw4lvIOl8u 9HeefZIeOwrzXo6ipPwLYETE1hFgqPieJwz99+ZCfeiuOgIVienAj+gDlRLid9rJ VoVqAuS6oqc5aJyZeD90sSURhWj2+YElSabgit5TDIre8XNgQc5OYCdmnZNiUfVp nuaAOEixKK6XW9a/7nlvO5AHj6B3I5kGlo5w4vKtHOFkt2t4smmWWovBGSmfqWG/ RZhhWJQfmONaDcHwibiWfg7hkxlP1o8hMYZm6scTgpqOduRSp1Qr7BVMb74qxRTn Jx6KtWFPWfvquUOq5Qxym4evcFNvr4j5gevY6k+787K05Gz4tJE= =7Oe6 -----END PGP SIGNATURE----- Sun Jul 11 14:34:17 UTC 2021 I: Checking whether the package is not for us Sun Jul 11 14:34:17 UTC 2021 I: Starting 1st build on remote node ionos11-amd64.debian.net. Sun Jul 11 14:34:17 UTC 2021 I: Preparing to do remote build '1' on ionos11-amd64.debian.net. Sun Jul 11 14:35:21 UTC 2021 I: Deleting $TMPDIR on ionos11-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Jul 11 02:34:18 -12 2021 I: pbuilder-time-stamp: 1626014058 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [splat_1.4.2-2.dsc] I: copying [./splat_1.4.2.orig.tar.bz2] I: copying [./splat_1.4.2-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sun Feb 3 17:44:22 2019 -12 gpgv: using RSA key 8470F20B062592187CBA7BB33A936196C095D941 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./splat_1.4.2-2.dsc dpkg-source: info: extracting splat in splat-1.4.2 dpkg-source: info: unpacking splat_1.4.2.orig.tar.bz2 dpkg-source: info: unpacking splat_1.4.2-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/20806/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=15' DISTRIBUTION='' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='32171b4738aa493eb4108e6391a5f7a7' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='20806' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.IhED0BWvG3/pbuilderrc_C7s7 --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.IhED0BWvG3/b1 --logfile b1/build.log splat_1.4.2-2.dsc' SUDO_GID='111' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://78.137.99.97:3128' I: uname -a Linux ionos11-amd64 4.19.0-17-amd64 #1 SMP Debian 4.19.194-2 (2021-06-21) x86_64 GNU/Linux I: ls -l /bin total 5116 -rwxr-xr-x 1 root root 1168776 Apr 17 2019 bash -rwxr-xr-x 3 root root 38984 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 38984 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 38984 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 14328 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 43744 Feb 28 2019 cat -rwxr-xr-x 1 root root 64320 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 64288 Feb 28 2019 chmod -rwxr-xr-x 1 root root 72512 Feb 28 2019 chown -rwxr-xr-x 1 root root 146880 Feb 28 2019 cp -rwxr-xr-x 1 root root 121464 Jan 17 2019 dash -rwxr-xr-x 1 root root 109408 Feb 28 2019 date -rwxr-xr-x 1 root root 76712 Feb 28 2019 dd -rwxr-xr-x 1 root root 93744 Feb 28 2019 df -rwxr-xr-x 1 root root 138856 Feb 28 2019 dir -rwxr-xr-x 1 root root 84288 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 39520 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 35424 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 68880 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 34896 Apr 22 2020 fusermount -rwxr-xr-x 1 root root 198976 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 98048 Jan 5 2019 gzip -rwxr-xr-x 1 root root 26696 Sep 26 2018 hostname -rwxr-xr-x 1 root root 68552 Feb 28 2019 ln -rwxr-xr-x 1 root root 56760 Jul 26 2018 login -rwxr-xr-x 1 root root 138856 Feb 28 2019 ls -rwxr-xr-x 1 root root 108624 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 89088 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 68544 Feb 28 2019 mknod -rwxr-xr-x 1 root root 43808 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 43008 Jan 9 2019 more -rwsr-xr-x 1 root root 51280 Jan 9 2019 mount -rwxr-xr-x 1 root root 14408 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 138728 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 39616 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 47776 Feb 28 2019 readlink -rwxr-xr-x 1 root root 68416 Feb 28 2019 rm -rwxr-xr-x 1 root root 47776 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 23312 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 122224 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 6 20:24 sh -> dash -rwxr-xr-x 1 root root 39552 Feb 28 2019 sleep -rwxr-xr-x 1 root root 80672 Feb 28 2019 stty -rwsr-xr-x 1 root root 63568 Jan 9 2019 su -rwxr-xr-x 1 root root 35488 Feb 28 2019 sync -rwxr-xr-x 1 root root 445560 Apr 23 2019 tar -rwxr-xr-x 1 root root 14440 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 97152 Feb 28 2019 touch -rwxr-xr-x 1 root root 35424 Feb 28 2019 true -rwxr-xr-x 1 root root 14328 Apr 22 2020 ulockmgr_server -rwsr-xr-x 1 root root 34888 Jan 9 2019 umount -rwxr-xr-x 1 root root 39584 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 138856 Feb 28 2019 vdir -rwxr-xr-x 1 root root 34896 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/20806/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 7.0.50~), libbz2-dev, zlib1g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19195 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 7.0.50~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libbz2-dev; however: Package libbz2-dev is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libbz2-dev{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: bzip2-doc curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 19.3 MB of archives. After unpacking 70.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main amd64 libbsd0 amd64 0.9.1-2+deb10u1 [99.5 kB] Get: 2 http://deb.debian.org/debian buster/main amd64 bsdmainutils amd64 11.1.2+b1 [191 kB] Get: 3 http://deb.debian.org/debian buster/main amd64 libuchardet0 amd64 0.0.6-3 [64.9 kB] Get: 4 http://deb.debian.org/debian buster/main amd64 groff-base amd64 1.22.4-3+deb10u1 [916 kB] Get: 5 http://deb.debian.org/debian buster/main amd64 libpipeline1 amd64 1.5.1-2 [31.2 kB] Get: 6 http://deb.debian.org/debian buster/main amd64 man-db amd64 2.8.5-2 [1274 kB] Get: 7 http://deb.debian.org/debian buster/main amd64 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main amd64 libmagic-mgc amd64 1:5.35-4+deb10u2 [242 kB] Get: 9 http://deb.debian.org/debian buster/main amd64 libmagic1 amd64 1:5.35-4+deb10u2 [118 kB] Get: 10 http://deb.debian.org/debian buster/main amd64 file amd64 1:5.35-4+deb10u2 [66.4 kB] Get: 11 http://deb.debian.org/debian buster/main amd64 gettext-base amd64 0.19.8.1-9 [123 kB] Get: 12 http://deb.debian.org/debian buster/main amd64 libsigsegv2 amd64 2.12-2 [32.8 kB] Get: 13 http://deb.debian.org/debian buster/main amd64 m4 amd64 1.4.18-2 [203 kB] Get: 14 http://deb.debian.org/debian buster/main amd64 autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main amd64 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main amd64 automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main amd64 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main amd64 libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main amd64 dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main amd64 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main amd64 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main amd64 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main amd64 libelf1 amd64 0.176-1.1 [161 kB] Get: 24 http://deb.debian.org/debian buster/main amd64 dwz amd64 0.12-3 [78.0 kB] Get: 25 http://deb.debian.org/debian buster/main amd64 libglib2.0-0 amd64 2.58.3-2+deb10u3 [1259 kB] Get: 26 http://deb.debian.org/debian buster/main amd64 libicu63 amd64 63.1-6+deb10u1 [8300 kB] Get: 27 http://deb.debian.org/debian buster/main amd64 libxml2 amd64 2.9.4+dfsg1-7+deb10u2 [689 kB] Get: 28 http://deb.debian.org/debian buster/main amd64 libcroco3 amd64 0.6.12-3 [145 kB] Get: 29 http://deb.debian.org/debian buster/main amd64 libncurses6 amd64 6.1+20181013-2+deb10u2 [102 kB] Get: 30 http://deb.debian.org/debian buster/main amd64 gettext amd64 0.19.8.1-9 [1303 kB] Get: 31 http://deb.debian.org/debian buster/main amd64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main amd64 po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main amd64 debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main amd64 libbz2-dev amd64 1.0.6-9.2~deb10u1 [30.2 kB] Get: 35 http://deb.debian.org/debian buster/main amd64 zlib1g-dev amd64 1:1.2.11.dfsg-1 [214 kB] Fetched 19.3 MB in 1s (36.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19195 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2+deb10u1_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-2+deb10u1) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_amd64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../02-libuchardet0_0.0.6-3_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3+deb10u1_amd64.deb ... Unpacking groff-base (1.22.4-3+deb10u1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../04-libpipeline1_1.5.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u2_amd64.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u2) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u2_amd64.deb ... Unpacking libmagic1:amd64 (1:5.35-4+deb10u2) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u2_amd64.deb ... Unpacking file (1:5.35-4+deb10u2) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_amd64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../11-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_amd64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../22-libelf1_0.176-1.1_amd64.deb ... Unpacking libelf1:amd64 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_amd64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u3_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.3-2+deb10u3) ... Selecting previously unselected package libicu63:amd64. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_amd64.deb ... Unpacking libicu63:amd64 (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+deb10u2_amd64.deb ... Unpacking libxml2:amd64 (2.9.4+dfsg1-7+deb10u2) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../27-libcroco3_0.6.12-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-3) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_amd64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libbz2-dev:amd64. Preparing to unpack .../33-libbz2-dev_1.0.6-9.2~deb10u1_amd64.deb ... Unpacking libbz2-dev:amd64 (1.0.6-9.2~deb10u1) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../34-zlib1g-dev_1%3a1.2.11.dfsg-1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-1) ... Setting up libpipeline1:amd64 (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u2) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:amd64 (2.58.3-2+deb10u3) ... No schema files found: doing nothing. Setting up libmagic1:amd64 (1:5.35-4+deb10u2) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u2) ... Setting up libicu63:amd64 (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:amd64 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:amd64 (0.0.6-3) ... Setting up libbsd0:amd64 (0.9.1-2+deb10u1) ... Setting up libelf1:amd64 (0.176-1.1) ... Setting up libxml2:amd64 (2.9.4+dfsg1-7+deb10u2) ... Setting up libbz2-dev:amd64 (1.0.6-9.2~deb10u1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:amd64 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3+deb10u1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/splat-1.4.2/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package splat dpkg-buildpackage: info: source version 1.4.2-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Bdale Garbee dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean make: 'clean' is up to date. debian/rules build make: 'build' is up to date. fakeroot debian/rules binary dh binary dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_update_autotools_config debian/rules override_dh_auto_configure make[1]: Entering directory '/build/splat-1.4.2' # debian/std-parms.h & debian/hd-parms.h were made using ./configure make[1]: Leaving directory '/build/splat-1.4.2' debian/rules override_dh_auto_build make[1]: Entering directory '/build/splat-1.4.2' #./build all cp debian/std-parms.h splat.h g++ -g -Wall -fomit-frame-pointer -O3 -ffast-math itwom3.0.cpp splat.cpp -o splat -lm -lbz2 splat.cpp: In function 'int LoadSDF_SDF(char*)': splat.cpp:1700:11: warning: 'char* strncat(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncat(path_plus_name,sdf_file,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'int LoadSDF_BZ(char*)': splat.cpp:1934:11: warning: 'char* strncat(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncat(path_plus_name,sdf_file,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void LoadCities(char*)': splat.cpp:2217:11: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 49 bytes from a string of length 79 [-Wstringop-truncation] strncpy(city_site.name,str[0],49); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WritePPM(char*, unsigned char, unsigned char, unsigned char, site*, unsigned char)': splat.cpp:3897:10: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncpy(filename, xmtr[0].filename,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WritePPMLR(char*, unsigned char, unsigned char, unsigned char, site*, unsigned char)': splat.cpp:4184:10: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncpy(filename, xmtr[0].filename,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WritePPMSS(char*, unsigned char, unsigned char, unsigned char, site*, unsigned char)': splat.cpp:4663:10: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncpy(filename, xmtr[0].filename,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WritePPMDBM(char*, unsigned char, unsigned char, unsigned char, site*, unsigned char)': splat.cpp:5177:10: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncpy(filename, xmtr[0].filename,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void ObstructionAnalysis(site, site, double, FILE*)': splat.cpp:6616:24: warning: '. ' directive output may be truncated writing 2 bytes into a region of size between 0 and 59 [-Wformat-truncation=] snprintf(string,150,"\nAntenna at %s must be raised to at least %.2f feet AGL\nto clear all obstructions detected by %s.\n",rcvr.name, h_r-GetElevation(rcvr)-earthradius,splat_name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:6616:12: note: 'snprintf' output between 94 and 462 bytes into a destination of size 150 snprintf(string,150,"\nAntenna at %s must be raised to at least %.2f feet AGL\nto clear all obstructions detected by %s.\n",rcvr.name, h_r-GetElevation(rcvr)-earthradius,splat_name); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:6614:24: warning: '%s' directive output may be truncated writing up to 9 bytes into a region of size between 0 and 57 [-Wformat-truncation=] snprintf(string,150,"\nAntenna at %s must be raised to at least %.2f meters AGL\nto clear all obstructions detected by %s.\n",rcvr.name, METERS_PER_FOOT*(h_r-GetElevation(rcvr)-earthradius),splat_name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~ splat.cpp:6614:12: note: 'snprintf' output between 96 and 464 bytes into a destination of size 150 snprintf(string,150,"\nAntenna at %s must be raised to at least %.2f meters AGL\nto clear all obstructions detected by %s.\n",rcvr.name, METERS_PER_FOOT*(h_r-GetElevation(rcvr)-earthradius),splat_name); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void PathReport(site, site, char*, char)': splat.cpp:6682:22: warning: '%s' directive writing up to 49 bytes into a region of size between 27 and 76 [-Wformat-overflow=] sprintf(report_name,"%s-to-%s.txt",source.name,destination.name); ^~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~ splat.cpp:6682:9: note: 'sprintf' output between 9 and 107 bytes into a destination of size 80 sprintf(report_name,"%s-to-%s.txt",source.name,destination.name); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void LoadTopoData(int, int, int, int)': splat.cpp:7441:25: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 12 [-Wformat-truncation=] snprintf(string,16,"%d:%d:%d:%d",x, x+1, ymin, ymax); ^~~~~~~~~~~~~ splat.cpp:7441:25: note: directive argument in the range [0, 2147483647] splat.cpp:7441:25: note: directive argument in the range [0, 360] splat.cpp:7441:14: note: 'snprintf' output between 8 and 39 bytes into a destination of size 16 snprintf(string,16,"%d:%d:%d:%d",x, x+1, ymin, ymax); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:7439:25: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 15 [-Wformat-truncation=] snprintf(string,19,"%d:%d:%d:%d-hd",x, x+1, ymin, ymax); ^~~~~~~~~~~~~~~~ splat.cpp:7439:25: note: directive argument in the range [0, 2147483647] splat.cpp:7439:25: note: directive argument in the range [0, 360] splat.cpp:7439:14: note: 'snprintf' output between 11 and 42 bytes into a destination of size 19 snprintf(string,19,"%d:%d:%d:%d-hd",x, x+1, ymin, ymax); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:7412:25: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 12 [-Wformat-truncation=] snprintf(string,16,"%d:%d:%d:%d",x, x+1, ymin, ymax); ^~~~~~~~~~~~~ splat.cpp:7412:25: note: directive argument in the range [0, 2147483647] splat.cpp:7412:25: note: directive argument in the range [0, 360] splat.cpp:7412:14: note: 'snprintf' output between 8 and 39 bytes into a destination of size 16 snprintf(string,16,"%d:%d:%d:%d",x, x+1, ymin, ymax); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:7410:25: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 15 [-Wformat-truncation=] snprintf(string,19,"%d:%d:%d:%d-hd",x, x+1, ymin, ymax); ^~~~~~~~~~~~~~~~ splat.cpp:7410:25: note: directive argument in the range [0, 2147483647] splat.cpp:7410:25: note: directive argument in the range [0, 360] splat.cpp:7410:14: note: 'snprintf' output between 11 and 42 bytes into a destination of size 19 snprintf(string,19,"%d:%d:%d:%d-hd",x, x+1, ymin, ymax); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WriteKML(site, site)': splat.cpp:7571:22: warning: '%s' directive writing up to 49 bytes into a region of size between 27 and 76 [-Wformat-overflow=] sprintf(report_name,"%s-to-%s.kml",source.name,destination.name); ^~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~ splat.cpp:7571:9: note: 'sprintf' output between 9 and 107 bytes into a destination of size 80 sprintf(report_name,"%s-to-%s.kml",source.name,destination.name); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'int main(int, char**)': splat.cpp:8704:25: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s.%s%c",longley_file,ext,0); ^~~~~~~~~ ~~~~~~~~~~~~ splat.cpp:8704:13: note: 'snprintf' output between 3 and 276 bytes into a destination of size 250 snprintf(string,250,"%s.%s%c",longley_file,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8702:25: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s-%c.%s%c",longley_file,'1'+x,ext,0); ^~~~~~~~~~~~ ~~~~~~~~~~~~ splat.cpp:8702:13: note: 'snprintf' output between 5 and 278 bytes into a destination of size 250 snprintf(string,250,"%s-%c.%s%c",longley_file,'1'+x,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8726:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s.%s%c",terrain_file,ext,0); ^~~~~~~~~ ~~~~~~~~~~~~ splat.cpp:8726:14: note: 'snprintf' output between 3 and 276 bytes into a destination of size 250 snprintf(string,250,"%s.%s%c",terrain_file,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8724:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s-%c.%s%c",terrain_file,'1'+x,ext,0); ^~~~~~~~~~~~ ~~~~~~~~~~~~ splat.cpp:8724:14: note: 'snprintf' output between 5 and 278 bytes into a destination of size 250 snprintf(string,250,"%s-%c.%s%c",terrain_file,'1'+x,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8736:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s.%s%c",elevation_file,ext,0); ^~~~~~~~~ ~~~~~~~~~~~~~~ splat.cpp:8736:14: note: 'snprintf' output between 3 and 276 bytes into a destination of size 250 snprintf(string,250,"%s.%s%c",elevation_file,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8734:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s-%c.%s%c",elevation_file,'1'+x,ext,0); ^~~~~~~~~~~~ ~~~~~~~~~~~~~~ splat.cpp:8734:14: note: 'snprintf' output between 5 and 278 bytes into a destination of size 250 snprintf(string,250,"%s-%c.%s%c",elevation_file,'1'+x,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8746:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s.%s%c",height_file,ext,0); ^~~~~~~~~ ~~~~~~~~~~~ splat.cpp:8746:14: note: 'snprintf' output between 3 and 276 bytes into a destination of size 250 snprintf(string,250,"%s.%s%c",height_file,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8744:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s-%c.%s%c",height_file,'1'+x,ext,0); ^~~~~~~~~~~~ ~~~~~~~~~~~ splat.cpp:8744:14: note: 'snprintf' output between 5 and 278 bytes into a destination of size 250 snprintf(string,250,"%s-%c.%s%c",height_file,'1'+x,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8343:11: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 253 bytes from a string of length 254 [-Wstringop-truncation] strncpy(sdf_path,string,253); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~ cp debian/hd-parms.h splat.h g++ -g -Wall -fomit-frame-pointer -O3 -ffast-math -pipe itwom3.0.cpp splat.cpp -o splat-hd -lm -lbz2 splat.cpp: In function 'int LoadSDF_SDF(char*)': splat.cpp:1700:11: warning: 'char* strncat(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncat(path_plus_name,sdf_file,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'int LoadSDF_BZ(char*)': splat.cpp:1934:11: warning: 'char* strncat(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncat(path_plus_name,sdf_file,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void LoadCities(char*)': splat.cpp:2217:11: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 49 bytes from a string of length 79 [-Wstringop-truncation] strncpy(city_site.name,str[0],49); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WritePPM(char*, unsigned char, unsigned char, unsigned char, site*, unsigned char)': splat.cpp:3897:10: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncpy(filename, xmtr[0].filename,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WritePPMLR(char*, unsigned char, unsigned char, unsigned char, site*, unsigned char)': splat.cpp:4184:10: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncpy(filename, xmtr[0].filename,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WritePPMSS(char*, unsigned char, unsigned char, unsigned char, site*, unsigned char)': splat.cpp:4663:10: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncpy(filename, xmtr[0].filename,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WritePPMDBM(char*, unsigned char, unsigned char, unsigned char, site*, unsigned char)': splat.cpp:5177:10: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncpy(filename, xmtr[0].filename,254); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void ObstructionAnalysis(site, site, double, FILE*)': splat.cpp:6616:24: warning: '. ' directive output may be truncated writing 2 bytes into a region of size between 0 and 59 [-Wformat-truncation=] snprintf(string,150,"\nAntenna at %s must be raised to at least %.2f feet AGL\nto clear all obstructions detected by %s.\n",rcvr.name, h_r-GetElevation(rcvr)-earthradius,splat_name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:6616:12: note: 'snprintf' output between 94 and 462 bytes into a destination of size 150 snprintf(string,150,"\nAntenna at %s must be raised to at least %.2f feet AGL\nto clear all obstructions detected by %s.\n",rcvr.name, h_r-GetElevation(rcvr)-earthradius,splat_name); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:6614:24: warning: '%s' directive output may be truncated writing up to 9 bytes into a region of size between 0 and 57 [-Wformat-truncation=] snprintf(string,150,"\nAntenna at %s must be raised to at least %.2f meters AGL\nto clear all obstructions detected by %s.\n",rcvr.name, METERS_PER_FOOT*(h_r-GetElevation(rcvr)-earthradius),splat_name); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~ splat.cpp:6614:12: note: 'snprintf' output between 96 and 464 bytes into a destination of size 150 snprintf(string,150,"\nAntenna at %s must be raised to at least %.2f meters AGL\nto clear all obstructions detected by %s.\n",rcvr.name, METERS_PER_FOOT*(h_r-GetElevation(rcvr)-earthradius),splat_name); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void PathReport(site, site, char*, char)': splat.cpp:6682:22: warning: '%s' directive writing up to 49 bytes into a region of size between 27 and 76 [-Wformat-overflow=] sprintf(report_name,"%s-to-%s.txt",source.name,destination.name); ^~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~ splat.cpp:6682:9: note: 'sprintf' output between 9 and 107 bytes into a destination of size 80 sprintf(report_name,"%s-to-%s.txt",source.name,destination.name); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void LoadTopoData(int, int, int, int)': splat.cpp:7441:25: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 12 [-Wformat-truncation=] snprintf(string,16,"%d:%d:%d:%d",x, x+1, ymin, ymax); ^~~~~~~~~~~~~ splat.cpp:7441:25: note: directive argument in the range [0, 2147483647] splat.cpp:7441:25: note: directive argument in the range [0, 360] splat.cpp:7441:14: note: 'snprintf' output between 8 and 39 bytes into a destination of size 16 snprintf(string,16,"%d:%d:%d:%d",x, x+1, ymin, ymax); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:7439:25: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 15 [-Wformat-truncation=] snprintf(string,19,"%d:%d:%d:%d-hd",x, x+1, ymin, ymax); ^~~~~~~~~~~~~~~~ splat.cpp:7439:25: note: directive argument in the range [0, 2147483647] splat.cpp:7439:25: note: directive argument in the range [0, 360] splat.cpp:7439:14: note: 'snprintf' output between 11 and 42 bytes into a destination of size 19 snprintf(string,19,"%d:%d:%d:%d-hd",x, x+1, ymin, ymax); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:7412:25: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 12 [-Wformat-truncation=] snprintf(string,16,"%d:%d:%d:%d",x, x+1, ymin, ymax); ^~~~~~~~~~~~~ splat.cpp:7412:25: note: directive argument in the range [0, 2147483647] splat.cpp:7412:25: note: directive argument in the range [0, 360] splat.cpp:7412:14: note: 'snprintf' output between 8 and 39 bytes into a destination of size 16 snprintf(string,16,"%d:%d:%d:%d",x, x+1, ymin, ymax); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:7410:25: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 15 [-Wformat-truncation=] snprintf(string,19,"%d:%d:%d:%d-hd",x, x+1, ymin, ymax); ^~~~~~~~~~~~~~~~ splat.cpp:7410:25: note: directive argument in the range [0, 2147483647] splat.cpp:7410:25: note: directive argument in the range [0, 360] splat.cpp:7410:14: note: 'snprintf' output between 11 and 42 bytes into a destination of size 19 snprintf(string,19,"%d:%d:%d:%d-hd",x, x+1, ymin, ymax); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'void WriteKML(site, site)': splat.cpp:7571:22: warning: '%s' directive writing up to 49 bytes into a region of size between 27 and 76 [-Wformat-overflow=] sprintf(report_name,"%s-to-%s.kml",source.name,destination.name); ^~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~ splat.cpp:7571:9: note: 'sprintf' output between 9 and 107 bytes into a destination of size 80 sprintf(report_name,"%s-to-%s.kml",source.name,destination.name); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp: In function 'int main(int, char**)': splat.cpp:8704:25: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s.%s%c",longley_file,ext,0); ^~~~~~~~~ ~~~~~~~~~~~~ splat.cpp:8704:13: note: 'snprintf' output between 3 and 276 bytes into a destination of size 250 snprintf(string,250,"%s.%s%c",longley_file,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8702:25: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s-%c.%s%c",longley_file,'1'+x,ext,0); ^~~~~~~~~~~~ ~~~~~~~~~~~~ splat.cpp:8702:13: note: 'snprintf' output between 5 and 278 bytes into a destination of size 250 snprintf(string,250,"%s-%c.%s%c",longley_file,'1'+x,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8726:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s.%s%c",terrain_file,ext,0); ^~~~~~~~~ ~~~~~~~~~~~~ splat.cpp:8726:14: note: 'snprintf' output between 3 and 276 bytes into a destination of size 250 snprintf(string,250,"%s.%s%c",terrain_file,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8724:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s-%c.%s%c",terrain_file,'1'+x,ext,0); ^~~~~~~~~~~~ ~~~~~~~~~~~~ splat.cpp:8724:14: note: 'snprintf' output between 5 and 278 bytes into a destination of size 250 snprintf(string,250,"%s-%c.%s%c",terrain_file,'1'+x,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8736:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s.%s%c",elevation_file,ext,0); ^~~~~~~~~ ~~~~~~~~~~~~~~ splat.cpp:8736:14: note: 'snprintf' output between 3 and 276 bytes into a destination of size 250 snprintf(string,250,"%s.%s%c",elevation_file,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8734:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s-%c.%s%c",elevation_file,'1'+x,ext,0); ^~~~~~~~~~~~ ~~~~~~~~~~~~~~ splat.cpp:8734:14: note: 'snprintf' output between 5 and 278 bytes into a destination of size 250 snprintf(string,250,"%s-%c.%s%c",elevation_file,'1'+x,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8746:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s.%s%c",height_file,ext,0); ^~~~~~~~~ ~~~~~~~~~~~ splat.cpp:8746:14: note: 'snprintf' output between 3 and 276 bytes into a destination of size 250 snprintf(string,250,"%s.%s%c",height_file,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8744:26: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 250 [-Wformat-truncation=] snprintf(string,250,"%s-%c.%s%c",height_file,'1'+x,ext,0); ^~~~~~~~~~~~ ~~~~~~~~~~~ splat.cpp:8744:14: note: 'snprintf' output between 5 and 278 bytes into a destination of size 250 snprintf(string,250,"%s-%c.%s%c",height_file,'1'+x,ext,0); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ splat.cpp:8343:11: warning: 'char* strncpy(char*, const char*, size_t)' output may be truncated copying 253 bytes from a string of length 254 [-Wstringop-truncation] strncpy(sdf_path,string,253); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~ rm -f splat.h (cd utils ; \ cc -g -Wall -O3 citydecoder.c -o citydecoder) (cd utils ; \ cc -g -Wall -O3 usgs2sdf.c -o usgs2sdf) (cd utils ; \ cc -g -Wall -O3 srtm2sdf.c -o srtm2sdf -lbz2) srtm2sdf.c: In function 'LoadSDF_SDF': srtm2sdf.c:264:2: warning: 'strncat' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncat(path_plus_name,sdf_file,254); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ srtm2sdf.c: In function 'LoadSDF_BZ': srtm2sdf.c:371:2: warning: 'strncat' output may be truncated copying 254 bytes from a string of length 254 [-Wstringop-truncation] strncat(path_plus_name,sdf_file,254); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ srtm2sdf.c: In function 'main': srtm2sdf.c:693:4: warning: 'strncpy' output may be truncated copying 253 bytes from a string of length 254 [-Wstringop-truncation] strncpy(sdf_path,string,253); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ (cd utils ; \ rm -f srtm2sdf-hd ; ln -s srtm2sdf srtm2sdf-hd ) (cd utils ; \ cc -g -Wall -O3 fontdata.c -o fontdata -lz) (cd utils ; \ cc -g -Wall -O3 bearing.c -o bearing -lm) make[1]: Leaving directory '/build/splat-1.4.2' dh_testroot dh_prep dh_installdirs dh_installdirs: Compatibility levels before 9 are deprecated (level 7 in use) dh_install dh_install: Compatibility levels before 9 are deprecated (level 7 in use) dh_installdocs dh_installdocs: Compatibility levels before 9 are deprecated (level 7 in use) dh_installchangelogs dh_installchangelogs: Compatibility levels before 9 are deprecated (level 7 in use) dh_installman dh_installman: Compatibility levels before 9 are deprecated (level 7 in use) dh_perl dh_link dh_strip_nondeterminism dh_compress dh_compress: Compatibility levels before 9 are deprecated (level 7 in use) dh_fixperms dh_missing dh_missing: Compatibility levels before 9 are deprecated (level 7 in use) dh_strip dh_strip: Compatibility levels before 9 are deprecated (level 7 in use) dh_makeshlibs dh_shlibdeps dh_shlibdeps: Compatibility levels before 9 are deprecated (level 7 in use) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/splat/usr/bin/splat-hd debian/splat/usr/bin/splat were not linked against libgcc_s.so.1 (they use none of the library's symbols) dh_installdeb dh_installdeb: Compatibility levels before 9 are deprecated (level 7 in use) dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'splat' in '../splat_1.4.2-2_amd64.deb'. dpkg-deb: building package 'splat-dbgsym' in '../splat-dbgsym_1.4.2-2_amd64.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../splat_1.4.2-2_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/20806 and its subdirectories I: Current time: Sun Jul 11 02:35:21 -12 2021 I: pbuilder-time-stamp: 1626014121 Sun Jul 11 14:35:21 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ionos15-amd64.debian.net. Sun Jul 11 14:35:21 UTC 2021 I: Preparing to do remote build '2' on ionos15-amd64.debian.net. Sun Jul 11 14:36:06 UTC 2021 I: Deleting $TMPDIR on ionos15-amd64.debian.net. Sun Jul 11 14:36:06 UTC 2021 I: splat_1.4.2-2_amd64.changes: Format: 1.8 Date: Sun, 03 Feb 2019 22:41:59 -0700 Source: splat Binary: splat splat-dbgsym Architecture: amd64 Version: 1.4.2-2 Distribution: unstable Urgency: low Maintainer: Bdale Garbee Changed-By: Bdale Garbee Description: splat - analyze point-to-point terrestrial RF communication links Changes: splat (1.4.2-2) unstable; urgency=low . [Ondřej Nový] * d/changelog: Remove trailing whitespaces * d/control: Remove trailing whitespaces * d/rules: Remove trailing whitespaces * d/control: Set Vcs-* to salsa.debian.org Checksums-Sha1: 0425172086efd762f089a9dcfff9a9289998c963 391308 splat-dbgsym_1.4.2-2_amd64.deb a49137d538c4331fa0d8e85a9a0c38e9807076a6 4705 splat_1.4.2-2_amd64.buildinfo 3444148f272a1d87c5e21a13a177799a4e7983fe 149960 splat_1.4.2-2_amd64.deb Checksums-Sha256: 4ec640a3457fc5c1e56ab1c9078ba1c6273db16ccbc37cafb289ac9a367b0a66 391308 splat-dbgsym_1.4.2-2_amd64.deb 2d87c36bb6782b7571c716ed7c60d2b0e5916acbbda00f7cea908c256a445595 4705 splat_1.4.2-2_amd64.buildinfo e1dd81fd96ea0cb8cb40f6699c9fd29aef9a72beb259b09234e9aaef156a5222 149960 splat_1.4.2-2_amd64.deb Files: 368edc3189411e77d19bd4f6384d0b38 391308 debug optional splat-dbgsym_1.4.2-2_amd64.deb c9dd84dbbb0af367c7f24ac1a428d57d 4705 hamradio optional splat_1.4.2-2_amd64.buildinfo fa51ff950a3cf738f7b7397a1164bb31 149960 hamradio optional splat_1.4.2-2_amd64.deb Sun Jul 11 14:36:07 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.IhED0BWvG3/splat_1.4.2-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.IhED0BWvG3/splat_1.4.2-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.IhED0BWvG3/splat_1.4.2-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.IhED0BWvG3/b1/splat_1.4.2-2_amd64.changes /srv/reproducible-results/rbuild-debian/tmp.IhED0BWvG3/b2/splat_1.4.2-2_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.262s) 0.262s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.028s) 0.028s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sun Jul 11 14:36:14 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Sun Jul 11 14:36:14 UTC 2021 I: splat from buster built successfully and reproducibly on amd64. Sun Jul 11 14:36:15 UTC 2021 I: Submitting .buildinfo files to external archives: Sun Jul 11 14:36:15 UTC 2021 I: Submitting 8.0K b1/splat_1.4.2-2_amd64.buildinfo.asc Sun Jul 11 14:36:17 UTC 2021 I: Submitting 8.0K b2/splat_1.4.2-2_amd64.buildinfo.asc Sun Jul 11 14:36:17 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Jul 11 14:36:17 UTC 2021 I: Done submitting .buildinfo files. Sun Jul 11 14:36:17 UTC 2021 I: Removing signed splat_1.4.2-2_amd64.buildinfo.asc files: removed './b1/splat_1.4.2-2_amd64.buildinfo.asc' removed './b2/splat_1.4.2-2_amd64.buildinfo.asc'