Thu Aug 19 03:43:21 UTC 2021 I: starting to build uronode/bullseye/i386 on jenkins on '2021-08-19 03:43' Thu Aug 19 03:43:21 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_6/20801/console.log Thu Aug 19 03:43:21 UTC 2021 I: Downloading source for bullseye/uronode=2.13-2 --2021-08-19 03:43:21-- http://cdn-fastly.deb.debian.org/debian/pool/main/u/uronode/uronode_2.13-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1580 (1.5K) Saving to: ‘uronode_2.13-2.dsc’ 0K . 100% 138M=0s 2021-08-19 03:43:21 (138 MB/s) - ‘uronode_2.13-2.dsc’ saved [1580/1580] Thu Aug 19 03:43:21 UTC 2021 I: uronode_2.13-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: uronode Binary: uronode Architecture: linux-any Version: 2.13-2 Maintainer: Debian Hamradio Maintainers Uploaders: Dave Hibberd Homepage: https://uronode.sourceforge.net/ Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/debian-hamradio-team/uronode Vcs-Git: https://salsa.debian.org/debian-hamradio-team/uronode.git Build-Depends: debhelper-compat (= 13), libax25-dev Package-List: uronode deb hamradio optional arch=linux-any Checksums-Sha1: b01a57839653163fe616ba35f2dd15bcba618343 211276 uronode_2.13.orig.tar.gz a2f9acc6617cf5ec05f3816428a37c941994a347 4772 uronode_2.13-2.debian.tar.xz Checksums-Sha256: 1c790548c3e65387318d0d4e8b5c08c06b9668ca69c209a5a0b3139d0159be3a 211276 uronode_2.13.orig.tar.gz 13578e490771317b2edb317b079909a39d0af445ffb67b298b9d94ed895089f5 4772 uronode_2.13-2.debian.tar.xz Files: e62d961043916d72468db0abdf94a6b6 211276 uronode_2.13.orig.tar.gz a2dc4d08fdf4a64105da6bbc17f838c0 4772 uronode_2.13-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQEzBAEBCgAdFiEERzSH56pa+zBfre1AiVnjPMqARLoFAmAYoCAACgkQiVnjPMqA RLrSjQf/UFLfWx1nF4SIh/Qeu/OatUCgQLNlTIH6g14HwUAkHMOHGzUqAqJmtx4F ENsCbaAqgNlGWZe1lsnF0u6CZL4Jqkhzu6vd1f3W6Ai4eMB5FDUwfrJQwtpblZ+/ 6/F3Uttd2JyfhnUHmbyew/bhknvVnub13ATDPrgeh2QF5EDh8wjDSsz0zC5jpT2x L+fJjFUEhLet6E+yHzGSHu9lr11wBHTKHInI8jm46wG+llUsN/E18pQ2H9Th6qB1 3mXddfV/9GJqQK3+X0rCElEno5Sjo3eZ8T7WtieP6Hg/h61Pa8YychIPbgMd+eM4 hAsCyGp3yDqWS07usMdMaHwBeUNzqQ== =wsPJ -----END PGP SIGNATURE----- Thu Aug 19 03:43:21 UTC 2021 I: Checking whether the package is not for us Thu Aug 19 03:43:21 UTC 2021 I: Starting 1st build on remote node ionos6-i386.debian.net. Thu Aug 19 03:43:21 UTC 2021 I: Preparing to do remote build '1' on ionos6-i386.debian.net. Thu Aug 19 03:43:43 UTC 2021 I: Deleting $TMPDIR on ionos6-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Sep 20 22:06:22 -12 2022 I: pbuilder-time-stamp: 1663754782 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [uronode_2.13-2.dsc] I: copying [./uronode_2.13.orig.tar.gz] I: copying [./uronode_2.13-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.aW3v1i3P/trustedkeys.kbx': General error gpgv: Signature made Mon Feb 1 12:43:12 2021 -12 gpgv: using RSA key 473487E7AA5AFB305FADED408959E33CCA8044BA gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./uronode_2.13-2.dsc dpkg-source: info: extracting uronode in uronode-2.13 dpkg-source: info: unpacking uronode_2.13.orig.tar.gz dpkg-source: info: unpacking uronode_2.13-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying multiple-definition.patch dpkg-source: info: applying non-interactive-install.patch dpkg-source: info: applying hardening dpkg-source: info: applying folder-update dpkg-source: info: applying install-dir-creation I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/7930/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=16' DISTRIBUTION='' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='ffe28525a64e4ff2873a7556498eafd2' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='7930' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.tTjfD0rPNH/pbuilderrc_DwlN --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.tTjfD0rPNH/b1 --logfile b1/build.log uronode_2.13-2.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://85.184.249.68:3128' I: uname -a Linux ionos6-i386 5.10.0-8-amd64 #1 SMP Debian 5.10.46-4 (2021-08-03) x86_64 GNU/Linux I: ls -l /bin total 5776 -rwxr-xr-x 1 root root 1367848 Aug 4 2021 bash -rwxr-xr-x 3 root root 38280 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 17768 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 38824 Sep 22 2020 cat -rwxr-xr-x 1 root root 71624 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 67528 Sep 22 2020 chmod -rwxr-xr-x 1 root root 75752 Sep 22 2020 chown -rwxr-xr-x 1 root root 157960 Sep 22 2020 cp -rwxr-xr-x 1 root root 128724 Dec 10 2020 dash -rwxr-xr-x 1 root root 124904 Sep 22 2020 date -rwxr-xr-x 1 root root 92172 Sep 22 2020 dd -rwxr-xr-x 1 root root 100752 Sep 22 2020 df -rwxr-xr-x 1 root root 153964 Sep 22 2020 dir -rwxr-xr-x 1 root root 83644 Jul 28 2021 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 34664 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 34664 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 71928 Jul 28 2021 findmnt -rwsr-xr-x 1 root root 30112 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 210488 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 100952 Mar 2 2021 gzip -rwxr-xr-x 1 root root 21916 Nov 6 2019 hostname -rwxr-xr-x 1 root root 83980 Sep 22 2020 ln -rwxr-xr-x 1 root root 55572 Feb 7 2020 login -rwxr-xr-x 1 root root 153964 Sep 22 2020 ls -rwxr-xr-x 1 root root 153124 Jul 28 2021 lsblk -rwxr-xr-x 1 root root 96328 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 79912 Sep 22 2020 mknod -rwxr-xr-x 1 root root 47048 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 58920 Jul 28 2021 more -rwsr-xr-x 1 root root 50720 Jul 28 2021 mount -rwxr-xr-x 1 root root 13856 Jul 28 2021 mountpoint -rwxr-xr-x 1 root root 157996 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 2021 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 38824 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 2021 rbash -> bash -rwxr-xr-x 1 root root 46984 Sep 22 2020 readlink -rwxr-xr-x 1 root root 75720 Sep 22 2020 rm -rwxr-xr-x 1 root root 46984 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 22292 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 125036 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Sep 17 03:48 sh -> dash -rwxr-xr-x 1 root root 34696 Sep 22 2020 sleep -rwxr-xr-x 1 root root 83880 Sep 22 2020 stty -rwsr-xr-x 1 root root 79396 Jul 28 2021 su -rwxr-xr-x 1 root root 34696 Sep 22 2020 sync -rwxr-xr-x 1 root root 602584 Feb 16 2021 tar -rwxr-xr-x 1 root root 13860 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 108520 Sep 22 2020 touch -rwxr-xr-x 1 root root 34664 Sep 22 2020 true -rwxr-xr-x 1 root root 17768 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 30236 Jul 28 2021 umount -rwxr-xr-x 1 root root 34664 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 153964 Sep 22 2020 vdir -rwxr-xr-x 1 root root 63024 Jul 28 2021 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/7930/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libax25-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19675 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libax25-dev; however: Package libax25-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libax25{a} libax25-dev{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 18.6 MB of archives. After unpacking 68.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main i386 bsdextrautils i386 2.36.1-8 [149 kB] Get: 2 http://deb.debian.org/debian bullseye/main i386 libuchardet0 i386 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main i386 groff-base i386 1.22.4-6 [952 kB] Get: 4 http://deb.debian.org/debian bullseye/main i386 libpipeline1 i386 1.5.3-1 [36.8 kB] Get: 5 http://deb.debian.org/debian bullseye/main i386 man-db i386 2.9.4-2 [1367 kB] Get: 6 http://deb.debian.org/debian bullseye/main i386 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main i386 libmagic-mgc i386 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main i386 libmagic1 i386 1:5.39-3 [133 kB] Get: 9 http://deb.debian.org/debian bullseye/main i386 file i386 1:5.39-3 [69.0 kB] Get: 10 http://deb.debian.org/debian bullseye/main i386 gettext-base i386 0.21-4 [176 kB] Get: 11 http://deb.debian.org/debian bullseye/main i386 libsigsegv2 i386 2.13-1 [35.1 kB] Get: 12 http://deb.debian.org/debian bullseye/main i386 m4 i386 1.4.18-5 [206 kB] Get: 13 http://deb.debian.org/debian bullseye/main i386 autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main i386 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main i386 automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main i386 autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main i386 libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main i386 libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main i386 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main i386 libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main i386 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 23 http://deb.debian.org/debian bullseye/main i386 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 24 http://deb.debian.org/debian bullseye/main i386 libelf1 i386 0.183-1 [171 kB] Get: 25 http://deb.debian.org/debian bullseye/main i386 dwz i386 0.13+20210201-1 [179 kB] Get: 26 http://deb.debian.org/debian bullseye/main i386 libicu67 i386 67.1-7 [8775 kB] Get: 27 http://deb.debian.org/debian bullseye/main i386 libxml2 i386 2.9.10+dfsg-6.7 [728 kB] Get: 28 http://deb.debian.org/debian bullseye/main i386 gettext i386 0.21-4 [1322 kB] Get: 29 http://deb.debian.org/debian bullseye/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main i386 debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main i386 libax25 i386 0.0.12-rc5+git20190411+b17ff36-3 [27.5 kB] Get: 33 http://deb.debian.org/debian bullseye/main i386 libax25-dev i386 0.0.12-rc5+git20190411+b17ff36-3 [29.1 kB] Fetched 18.6 MB in 0s (80.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19675 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_i386.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../01-libuchardet0_0.0.7-1_i386.deb ... Unpacking libuchardet0:i386 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_i386.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../03-libpipeline1_1.5.3-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_i386.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_i386.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../07-libmagic1_1%3a5.39-3_i386.deb ... Unpacking libmagic1:i386 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_i386.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_i386.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../10-libsigsegv2_2.13-1_i386.deb ... Unpacking libsigsegv2:i386 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_i386.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../23-libelf1_0.183-1_i386.deb ... Unpacking libelf1:i386 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_i386.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:i386. Preparing to unpack .../25-libicu67_67.1-7_i386.deb ... Unpacking libicu67:i386 (67.1-7) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_i386.deb ... Unpacking libxml2:i386 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_i386.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libax25. Preparing to unpack .../31-libax25_0.0.12-rc5+git20190411+b17ff36-3_i386.deb ... Unpacking libax25 (0.0.12-rc5+git20190411+b17ff36-3) ... Selecting previously unselected package libax25-dev. Preparing to unpack .../32-libax25-dev_0.0.12-rc5+git20190411+b17ff36-3_i386.deb ... Unpacking libax25-dev (0.0.12-rc5+git20190411+b17ff36-3) ... Setting up libpipeline1:i386 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:i386 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:i386 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libax25 (0.0.12-rc5+git20190411+b17ff36-3) ... Setting up libsigsegv2:i386 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:i386 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libelf1:i386 (0.183-1) ... Setting up libxml2:i386 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libax25-dev (0.0.12-rc5+git20190411+b17ff36-3) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/uronode-2.13/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../uronode_2.13-2_source.changes dpkg-buildpackage: info: source package uronode dpkg-buildpackage: info: source version 2.13-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Dave Hibberd dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure ./configure --build=i686-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking Cleaning the directory for a fresh configuration... make[1]: *** No rule to make target 'distclean'. Stop. Welcome to the configuration utility for URONode. This configure script will very simply and easily guide you into installling URONode with as very little trouble as possible. All you need to really do is simply answer the following questions below properly. If you make a mistake just break out of it (ctrl+c) and rerun ./configure. Let's get started! you need gcc to build URONode: saw /usr/bin/gcc... GCC found! Congratulations!! you need make to make URONode: saw /usr/bin/make... MAKE found! Your machine architecture is: x86_64 Checking for the existence of the Zlib headers... not found. Without Zlib Node will lack compression support See INSTALL for more information. Creating Makefile Creating Makefile.include Creating config.h Creating dependancy files... Configuration successful!! about the authors... URONode is a combined effort of years worth of work. Those who's code is included in this flavor of a linux based node are: Brian Rogers N1URO (current maintainer), Marius Petrescu YO2LOJ (current team member), Bob Tenty VE3TOK (current team member), Stefano Noferi IZ5AWZ (AWZNode) Tomi Manninen OH2BNS, Alan Cox GW4PTS, and Roy Van Zundert PE1RJA Special thanks to: Morgan, sm6tky for his security report and Barry K2MF for his input on some of my routines and supplying some source code. If you did not use interactive mode, you must run make manually. debian/rules override_dh_auto_build make[1]: Entering directory '/build/uronode-2.13' cat CHANGES.* > changelog dh_auto_build make -j16 make[2]: Entering directory '/build/uronode-2.13' gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c user.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c util.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c nodeusers.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c node.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c cmdparse.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c config.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c command.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c jheard.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c axcalluser.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c gateway.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c extcmd.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c procinfo.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c router.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c system.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c sysinfo.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c ipc.c ipc.c: In function 'usr2_handler': ipc.c:41:7: warning: implicit declaration of function 'node_prompt' [-Wimplicit-function-declaration] 41 | node_prompt(); | ^~~~~~~~~~~ node.c: In function 'main': node.c:342:2: warning: implicit declaration of function 'node_prompt' [-Wimplicit-function-declaration] 342 | node_prompt(); | ^~~~~~~~~~~ extcmd.c: In function 'pipe_extcmd': extcmd.c:87:5: warning: ignoring return value of 'setgid' declared with attribute 'warn_unused_result' [-Wunused-result] 87 | setgid(cmdp->gid); | ^~~~~~~~~~~~~~~~~ extcmd.c:88:5: warning: ignoring return value of 'setuid' declared with attribute 'warn_unused_result' [-Wunused-result] 88 | setuid(cmdp->uid); | ^~~~~~~~~~~~~~~~~ extcmd.c: In function 'norm_extcmd': extcmd.c:40:5: warning: ignoring return value of 'setgid' declared with attribute 'warn_unused_result' [-Wunused-result] 40 | setgid(cmdp->gid); | ^~~~~~~~~~~~~~~~~ extcmd.c:41:5: warning: ignoring return value of 'setuid' declared with attribute 'warn_unused_result' [-Wunused-result] 41 | setuid(cmdp->uid); | ^~~~~~~~~~~~~~~~~ command.c: In function 'do_status': command.c:872:10: warning: implicit declaration of function 'meminfo' [-Wimplicit-function-declaration] 872 | ma = meminfo("memtotal"); | ^~~~~~~ command.c: In function 'nuser_list': command.c:1021:25: warning: implicit declaration of function 'kill' [-Wimplicit-function-declaration] 1021 | if (u.pid == -1 || (kill(u.pid, 0) == -1 && errno == ESRCH)) | ^~~~ system.c: In function 'find_pty': system.c:88:18: warning: too many arguments for format [-Wformat-extra-args] 88 | sprintf(master, "/dev/ptmx", O_RDWR); | ^~~~~~~~~~~ system.c:91:15: warning: passing argument 1 of 'sprintf' from incompatible pointer type [-Wincompatible-pointer-types] 91 | sprintf(ptyname, "/dev/ptmx", 'p' + (num >> 4), num & 0xf); | ^~~~~~~ | | | char ** In file included from /usr/include/features.h:461, from /usr/include/i386-linux-gnu/bits/libc-header-start.h:33, from /usr/include/stdio.h:27, from system.c:1: /usr/include/i386-linux-gnu/bits/stdio2.h:34:1: note: expected 'char * restrict' but argument is of type 'char **' 34 | __NTH (sprintf (char *__restrict __s, const char *__restrict __fmt, ...)) | ^~~~~ system.c:91:24: warning: too many arguments for format [-Wformat-extra-args] 91 | sprintf(ptyname, "/dev/ptmx", 'p' + (num >> 4), num & 0xf); | ^~~~~~~~~~~ system.c: In function 'login_open': system.c:149:23: warning: passing argument 1 of 'find_pty' from incompatible pointer type [-Wincompatible-pointer-types] 149 | if ((ptyfd=find_pty(ptyname)) < 0) { | ^~~~~~~ | | | char * system.c:78:21: note: expected 'char **' but argument is of type 'char *' 78 | int find_pty(char **ptyname) | ~~~~~~~^~~~~~~ system.c: In function 'login_close': system.c:110:5: warning: ignoring return value of 'chown' declared with attribute 'warn_unused_result' [-Wunused-result] 110 | chown(ptyname, 0, 0); | ^~~~~~~~~~~~~~~~~~~~ system.c: In function 'login_open': system.c:171:5: warning: ignoring return value of 'dup' declared with attribute 'warn_unused_result' [-Wunused-result] 171 | dup(0); | ^~~~~~ system.c:172:5: warning: ignoring return value of 'dup' declared with attribute 'warn_unused_result' [-Wunused-result] 172 | dup(0); | ^~~~~~ system.c:207:5: warning: ignoring return value of 'setgid' declared with attribute 'warn_unused_result' [-Wunused-result] 207 | setgid(pw->pw_gid); | ^~~~~~~~~~~~~~~~~~ system.c:208:5: warning: ignoring return value of 'setuid' declared with attribute 'warn_unused_result' [-Wunused-result] 208 | setuid(pw->pw_uid); | ^~~~~~~~~~~~~~~~~~ system.c:271:4: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 271 | write(ptyfd, buf, cnt); | ^~~~~~~~~~~~~~~~~~~~~~ system.c: In function 'lastlog': system.c:547:3: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 547 | write(last, (char *)&ll, sizeof(ll)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c axdigi.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c calibrate.c gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c flexd.c router.c: In function 'do_dest': router.c:261:23: warning: '%d' directive writing between 1 and 5 bytes into a region of size between 0 and 4 [-Wformat-overflow=] 261 | sprintf(ssid, "%d-%d", p->ssida, p->sside); | ^~ router.c:261:19: note: directive argument in the range [0, 65535] 261 | sprintf(ssid, "%d-%d", p->ssida, p->sside); | ^~~~~~~ In file included from /usr/include/stdio.h:867, from router.c:1: /usr/include/i386-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 4 and 12 bytes into a destination of size 6 36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 37 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ router.c:237:25: warning: '%d' directive writing between 1 and 5 bytes into a region of size between 0 and 4 [-Wformat-overflow=] 237 | sprintf(ssid, "%d-%d", p->ssida, p->sside); | ^~ router.c:237:21: note: directive argument in the range [0, 65535] 237 | sprintf(ssid, "%d-%d", p->ssida, p->sside); | ^~~~~~~ In file included from /usr/include/stdio.h:867, from router.c:1: /usr/include/i386-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 4 and 12 bytes into a destination of size 6 36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 37 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ router.c:204:25: warning: '%d' directive writing between 1 and 5 bytes into a region of size between 0 and 4 [-Wformat-overflow=] 204 | sprintf(ssid, "%d-%d", p->ssida, p->sside); | ^~ router.c:204:21: note: directive argument in the range [0, 65535] 204 | sprintf(ssid, "%d-%d", p->ssida, p->sside); | ^~~~~~~ In file included from /usr/include/stdio.h:867, from router.c:1: /usr/include/i386-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 4 and 12 bytes into a destination of size 6 36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 37 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gateway.c: In function 'connect_to.constprop': gateway.c:40:21: warning: '-15' directive writing 3 bytes into a region of size between 1 and 10 [-Wformat-overflow=] 40 | sprintf(out, "%s-15", in); | ^~~ In file included from /usr/include/stdio.h:867, from gateway.c:1: /usr/include/i386-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 4 and 13 bytes into a destination of size 10 36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 37 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gateway.c:37:22: warning: '%d' directive writing between 1 and 11 bytes into a region of size between 0 and 9 [-Wformat-overflow=] 37 | sprintf(out, "%s-%d", in, 15 - atoi(cp + 1)); | ^~ gateway.c:37:18: note: directive argument in the range [-2147483632, 2147483647] 37 | sprintf(out, "%s-%d", in, 15 - atoi(cp + 1)); | ^~~~~~~ In file included from /usr/include/stdio.h:867, from gateway.c:1: /usr/include/i386-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 3 and 22 bytes into a destination of size 10 36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 37 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ flexd.c: In function 'download_dest': flexd.c:146:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 146 | write(STDOUT_FILENO, buffer, strlen(buffer)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ flexd.c:155:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 155 | write(STDOUT_FILENO, buffer, strlen(buffer)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ flexd.c:170:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 170 | write(STDOUT_FILENO, buffer, strlen(buffer)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ flexd.c:183:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 183 | write(STDOUT_FILENO, buffer, strlen(buffer)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ flexd.c:190:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 190 | write(STDOUT_FILENO, buffer, strlen(buffer)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ flexd.c:211:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 211 | write(STDOUT_FILENO, buffer, strlen(buffer)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ flexd.c:240:2: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 240 | write(STDOUT_FILENO, buffer, strlen(buffer)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ flexd.c:292:2: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result] 292 | write(s, commands[cmd_send], 2); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -Wl,-z,relro -Wl,-z,now -o nodeusers user.o util.o nodeusers.o -lax25 -lax25io gcc -Wl,-z,relro -Wl,-z,now -o calibrate calibrate.o -lax25 -lax25io gcc -Wl,-z,relro -Wl,-z,now -o axdigi axdigi.o -lax25 -lax25io gcc -Wl,-z,relro -Wl,-z,now -o flexd flexd.o procinfo.o -lax25 -lax25io gcc -Wl,-z,relro -Wl,-z,now -o uronode user.o util.o node.o cmdparse.o config.o command.o jheard.o axcalluser.o gateway.o extcmd.o procinfo.o router.o system.o sysinfo.o ipc.o -lax25 -lax25io make[2]: Leaving directory '/build/uronode-2.13' make[1]: Leaving directory '/build/uronode-2.13' dh_auto_test create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j16 install DESTDIR=/build/uronode-2.13/debian/uronode AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/uronode-2.13' install -b -m 755 -D -d debian/uronode/usr/sbin install -m 755 -D -d debian/uronode/usr/share/man/man1 debian/uronode/usr/share/man/man5 debian/uronode/usr/share/man/man8 install -b -m 755 -D -d debian/uronode/var/lib/ax25 install -m 755 -s -p uronode debian/uronode/usr/sbin install -m 644 -p man/nodeusers.1 debian/uronode/usr/share/man/man1 install -b -m 755 -D -d debian/uronode/var/lib/ax25/node/help install -m 644 -p man/uronode.conf.5 debian/uronode/usr/share/man/man5 install -b -m 644 -p etc/help/*.hlp debian/uronode/var/lib/ax25/node/help install -m 644 -p man/uronode.perms.5 debian/uronode/usr/share/man/man5 install -m 755 -s -p nodeusers debian/uronode/usr/sbin install -m 644 -p man/flexd.conf.5 debian/uronode/usr/share/man/man5 install -b -m 755 -D -d debian/uronode/etc/ax25 install -m 644 -p man/uronode.8 debian/uronode/usr/share/man/man8 install -b -m 600 -p etc/uronode.announce debian/uronode/etc/ax25 install -m 755 -s -p axdigi debian/uronode/usr/sbin install -m 644 -p man/calibrate.8 debian/uronode/usr/share/man/man8 install -b -m 600 -p etc/uronode.conf debian/uronode/etc/ax25 install -m 644 -p man/axdigi.8 debian/uronode/usr/share/man/man8 install -b -m 600 -p etc/uronode.perms debian/uronode/etc/ax25 install -m 644 -p man/flexd.8 debian/uronode/usr/share/man/man8 install -m 755 -s -p calibrate debian/uronode/usr/sbin install -b -m 600 -p etc/uronode.info debian/uronode/etc/ax25 install -b -m 600 -p etc/uronode.motd debian/uronode/etc/ax25 install -m 755 -s -p flexd debian/uronode/usr/sbin install -b -m 600 -p etc/uronode.users debian/uronode/etc/ax25 install -b -m 600 -p etc/uronode.routes debian/uronode/etc/ax25 install -b -m 600 -p etc/flexd.conf debian/uronode/etc/ax25 install -b -m 755 -D -d debian/uronode/var/lib/ax25 install -b -m 755 -D -d debian/uronode/var/lib/ax25/node install -b -m 644 -p etc/loggedin debian/uronode/var/lib/ax25/node install -b -m 644 -p etc/lastlog debian/uronode/var/lib/ax25/node install -b -m 755 -D -d debian/uronode/var/lib/ax25/flex install -b -m 644 -p etc/gateways debian/uronode/var/lib/ax25/flex make[1]: Leaving directory '/build/uronode-2.13' dh_installdocs dh_installchangelogs dh_installman dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dwz: debian/uronode/usr/sbin/axdigi: .debug_info section not present dwz: debian/uronode/usr/sbin/calibrate: .debug_info section not present dwz: debian/uronode/usr/sbin/flexd: .debug_info section not present dwz: debian/uronode/usr/sbin/nodeusers: .debug_info section not present dwz: debian/uronode/usr/sbin/uronode: .debug_info section not present dwz: Too few files for multifile optimization dh_dwz: warning: No dwz multifile created, but not explicitly requested either so ignoring it. dh_dwz: warning: Common issues include no debug information at all (missing -g) and dh_dwz: warning: compressed debug information (#931891). dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'uronode' in '../uronode_2.13-2_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../uronode_2.13-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/7930 and its subdirectories I: Current time: Tue Sep 20 22:06:42 -12 2022 I: pbuilder-time-stamp: 1663754802 Thu Aug 19 03:43:43 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ionos12-i386.debian.net. Thu Aug 19 03:43:43 UTC 2021 I: Preparing to do remote build '2' on ionos12-i386.debian.net. Thu Aug 19 03:54:12 UTC 2021 I: Deleting $TMPDIR on ionos12-i386.debian.net. Thu Aug 19 03:54:12 UTC 2021 I: uronode_2.13-2_i386.changes: Format: 1.8 Date: Tue, 02 Feb 2021 00:18:52 +0000 Source: uronode Binary: uronode Architecture: i386 Version: 2.13-2 Distribution: unstable Urgency: medium Maintainer: Debian Hamradio Maintainers Changed-By: Dave Hibberd Description: uronode - Node front end for AX.25, NET/ROM, Rose and TCP Changes: uronode (2.13-2) unstable; urgency=medium . * Fix runtime bug introduced by changes in folder-update patch for 2.12-1 Checksums-Sha1: cee380c9ae0ff69e7122b084fe3f3ae68d615fb5 4642 uronode_2.13-2_i386.buildinfo d38823549bf9d00acb9a8fbfbee4bbfc4416fa1f 128024 uronode_2.13-2_i386.deb Checksums-Sha256: e188511b947a97a9641d6d797a5860646e32366e47104fb979302364210fcac8 4642 uronode_2.13-2_i386.buildinfo 3fc307cd1a4cf2134e6e6713cb3bf98015e3ba96113b6fc00dd060744bb42e48 128024 uronode_2.13-2_i386.deb Files: d7c7b2abebf64f986fb7c578a1353f44 4642 hamradio optional uronode_2.13-2_i386.buildinfo 9c0bfbe74350b16d6891fd7f00577b07 128024 hamradio optional uronode_2.13-2_i386.deb Thu Aug 19 03:54:13 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.tTjfD0rPNH/uronode_2.13-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.tTjfD0rPNH/uronode_2.13-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.tTjfD0rPNH/uronode_2.13-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.tTjfD0rPNH/b1/uronode_2.13-2_i386.changes /srv/reproducible-results/rbuild-debian/tmp.tTjfD0rPNH/b2/uronode_2.13-2_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.258s) 0.258s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.017s) 0.017s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Thu Aug 19 03:54:14 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Thu Aug 19 03:54:14 UTC 2021 I: uronode from bullseye built successfully and reproducibly on i386. Thu Aug 19 03:54:17 UTC 2021 I: Submitting .buildinfo files to external archives: Thu Aug 19 03:54:17 UTC 2021 I: Submitting 8.0K b1/uronode_2.13-2_i386.buildinfo.asc Thu Aug 19 03:54:18 UTC 2021 I: Submitting 8.0K b2/uronode_2.13-2_i386.buildinfo.asc Thu Aug 19 03:54:19 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Aug 19 03:54:19 UTC 2021 I: Done submitting .buildinfo files. Thu Aug 19 03:54:19 UTC 2021 I: Removing signed uronode_2.13-2_i386.buildinfo.asc files: removed './b1/uronode_2.13-2_i386.buildinfo.asc' removed './b2/uronode_2.13-2_i386.buildinfo.asc'