Sun May 30 08:22:01 UTC 2021 I: starting to build ssed/bullseye/i386 on jenkins on '2021-05-30 08:21' Sun May 30 08:22:01 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_14/13732/console.log Sun May 30 08:22:01 UTC 2021 I: Downloading source for bullseye/ssed=3.62-7 --2021-05-30 08:22:02-- http://cdn-fastly.deb.debian.org/debian/pool/main/s/ssed/ssed_3.62-7.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1043 (1.0K) Saving to: ‘ssed_3.62-7.dsc’ 0K . 100% 72.7M=0s 2021-05-30 08:22:02 (72.7 MB/s) - ‘ssed_3.62-7.dsc’ saved [1043/1043] Sun May 30 08:22:02 UTC 2021 I: ssed_3.62-7.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Format: 1.0 Source: ssed Binary: ssed Architecture: any Version: 3.62-7 Maintainer: Jose Antonio Quevedo Muñoz Homepage: http://sed.sf.net/grabbag/ssed/ Standards-Version: 3.8.4 Build-Depends: texinfo, debhelper (>= 7), autotools-dev Package-List: ssed deb utils extra Checksums-Sha1: 6bdc4cd07780e397787c0d494c962827bb407fa2 855644 ssed_3.62.orig.tar.gz bd1faa045aee7542c71aece85dbb57309f777302 21371 ssed_3.62-7.diff.gz Checksums-Sha256: af7ff67e052efabf3fd07d967161c39db0480adc7c01f5100a1996fec60b8ec4 855644 ssed_3.62.orig.tar.gz f22ac518c1c65404d99035d1f4bdccb302e83ab83d8973db662a13503630cee1 21371 ssed_3.62-7.diff.gz Files: 8f35882af95da4e5ddbf3de1add26f79 855644 ssed_3.62.orig.tar.gz bd5e770e50e325d65cf5079a814b04ba 21371 ssed_3.62-7.diff.gz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iEYEARECAAYFAlAA5H8ACgkQLc4/KDbU5PWGYACfZ7PEiXSKGv1X9qt25pfv1/JX P5kAnjloJKXLw0k9gktQ32qCs90+sxV3 =Hwji -----END PGP SIGNATURE----- Sun May 30 08:22:02 UTC 2021 I: Checking whether the package is not for us Sun May 30 08:22:02 UTC 2021 I: Starting 1st build on remote node ionos6-i386.debian.net. Sun May 30 08:22:02 UTC 2021 I: Preparing to do remote build '1' on ionos6-i386.debian.net. Sun May 30 08:22:36 UTC 2021 I: Deleting $TMPDIR on ionos6-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Jul 2 02:45:02 -12 2022 I: pbuilder-time-stamp: 1656773102 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [ssed_3.62-7.dsc] I: copying [./ssed_3.62.orig.tar.gz] I: copying [./ssed_3.62-7.diff.gz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.4ynaFEmT/trustedkeys.kbx': General error gpgv: Signature made Fri Jul 13 15:16:15 2012 -12 gpgv: using DSA key 2DCE3F2836D4E4F5 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./ssed_3.62-7.dsc dpkg-source: info: extracting ssed in ssed-3.62 dpkg-source: info: unpacking ssed_3.62.orig.tar.gz dpkg-source: info: applying ssed_3.62-7.diff.gz dpkg-source: info: upstream files that have been modified: ssed-3.62/conf5841.file ssed-3.62/doc/sed-in.texi ssed-3.62/doc/sed.1 ssed-3.62/doc/sed.info ssed-3.62/doc/sed.texi ssed-3.62/doc/stamp-vti ssed-3.62/doc/version.texi ssed-3.62/pcre/pcregrep.c ssed-3.62/pcre/regexec.c ssed-3.62/pcre/regexp.c ssed-3.62/po/de.po ssed-3.62/testsuite/dc.good ssed-3.62/testsuite/eval.in2 ssed-3.62/testsuite/pcretest.c I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/18526/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=18' DISTRIBUTION='' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='c0647f4c1e6b4571910a170c0824122f' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='18526' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.Kps6drducJ/pbuilderrc_Gm2o --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.Kps6drducJ/b1 --logfile b1/build.log ssed_3.62-7.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://85.184.249.68:3128' I: uname -a Linux ionos6-i386 4.19.0-16-amd64 #1 SMP Debian 4.19.181-1 (2021-03-19) x86_64 GNU/Linux I: ls -l /bin total 5776 -rwxr-xr-x 1 root root 1367848 Feb 24 2021 bash -rwxr-xr-x 3 root root 38280 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 17768 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 38824 Sep 22 2020 cat -rwxr-xr-x 1 root root 71624 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 67528 Sep 22 2020 chmod -rwxr-xr-x 1 root root 75752 Sep 22 2020 chown -rwxr-xr-x 1 root root 157960 Sep 22 2020 cp -rwxr-xr-x 1 root root 128724 Dec 10 2020 dash -rwxr-xr-x 1 root root 124904 Sep 22 2020 date -rwxr-xr-x 1 root root 92172 Sep 22 2020 dd -rwxr-xr-x 1 root root 100752 Sep 22 2020 df -rwxr-xr-x 1 root root 153964 Sep 22 2020 dir -rwxr-xr-x 1 root root 83644 Feb 7 2021 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 34664 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 34664 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 71928 Feb 7 2021 findmnt -rwsr-xr-x 1 root root 30112 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 210488 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 100952 Mar 2 2021 gzip -rwxr-xr-x 1 root root 21916 Nov 6 2019 hostname -rwxr-xr-x 1 root root 83980 Sep 22 2020 ln -rwxr-xr-x 1 root root 55572 Feb 7 2020 login -rwxr-xr-x 1 root root 153964 Sep 22 2020 ls -rwxr-xr-x 1 root root 153124 Feb 7 2021 lsblk -rwxr-xr-x 1 root root 96328 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 79912 Sep 22 2020 mknod -rwxr-xr-x 1 root root 47048 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 58920 Feb 7 2021 more -rwsr-xr-x 1 root root 50720 Feb 7 2021 mount -rwxr-xr-x 1 root root 13856 Feb 7 2021 mountpoint -rwxr-xr-x 1 root root 157996 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 2021 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 38824 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Feb 24 2021 rbash -> bash -rwxr-xr-x 1 root root 46984 Sep 22 2020 readlink -rwxr-xr-x 1 root root 75720 Sep 22 2020 rm -rwxr-xr-x 1 root root 46984 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 22292 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 125036 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jun 28 02:13 sh -> dash -rwxr-xr-x 1 root root 34696 Sep 22 2020 sleep -rwxr-xr-x 1 root root 83880 Sep 22 2020 stty -rwsr-xr-x 1 root root 79396 Feb 7 2021 su -rwxr-xr-x 1 root root 34696 Sep 22 2020 sync -rwxr-xr-x 1 root root 602584 Feb 16 2021 tar -rwxr-xr-x 1 root root 13860 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 108520 Sep 22 2020 touch -rwxr-xr-x 1 root root 34664 Sep 22 2020 true -rwxr-xr-x 1 root root 17768 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 30236 Feb 7 2021 umount -rwxr-xr-x 1 root root 34664 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 153964 Sep 22 2020 vdir -rwxr-xr-x 1 root root 63024 Feb 7 2021 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/18526/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: texinfo, debhelper (>= 7), autotools-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19674 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on texinfo; however: Package texinfo is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 7); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev; however: Package autotools-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtext-unidecode-perl{a} libtool{a} libuchardet0{a} libxml-libxml-perl{a} libxml-namespacesupport-perl{a} libxml-sax-base-perl{a} libxml-sax-perl{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} tex-common{a} texinfo{a} ucf{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libwww-perl libxml-sax-expat-perl lynx wget 0 packages upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 21.0 MB of archives. After unpacking 83.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main i386 bsdextrautils i386 2.36.1-7 [148 kB] Get: 2 http://deb.debian.org/debian bullseye/main i386 libuchardet0 i386 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main i386 groff-base i386 1.22.4-6 [952 kB] Get: 4 http://deb.debian.org/debian bullseye/main i386 libpipeline1 i386 1.5.3-1 [36.8 kB] Get: 5 http://deb.debian.org/debian bullseye/main i386 man-db i386 2.9.4-2 [1367 kB] Get: 6 http://deb.debian.org/debian bullseye/main i386 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main i386 ucf all 3.0043 [74.0 kB] Get: 8 http://deb.debian.org/debian bullseye/main i386 tex-common all 6.16 [53.7 kB] Get: 9 http://deb.debian.org/debian bullseye/main i386 libmagic-mgc i386 1:5.39-3 [273 kB] Get: 10 http://deb.debian.org/debian bullseye/main i386 libmagic1 i386 1:5.39-3 [133 kB] Get: 11 http://deb.debian.org/debian bullseye/main i386 file i386 1:5.39-3 [69.0 kB] Get: 12 http://deb.debian.org/debian bullseye/main i386 gettext-base i386 0.21-4 [176 kB] Get: 13 http://deb.debian.org/debian bullseye/main i386 libsigsegv2 i386 2.13-1 [35.1 kB] Get: 14 http://deb.debian.org/debian bullseye/main i386 m4 i386 1.4.18-5 [206 kB] Get: 15 http://deb.debian.org/debian bullseye/main i386 autoconf all 2.69-14 [313 kB] Get: 16 http://deb.debian.org/debian bullseye/main i386 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 17 http://deb.debian.org/debian bullseye/main i386 automake all 1:1.16.3-2 [814 kB] Get: 18 http://deb.debian.org/debian bullseye/main i386 autopoint all 0.21-4 [510 kB] Get: 19 http://deb.debian.org/debian bullseye/main i386 libdebhelper-perl all 13.3.4 [189 kB] Get: 20 http://deb.debian.org/debian bullseye/main i386 libtool all 2.4.6-15 [513 kB] Get: 21 http://deb.debian.org/debian bullseye/main i386 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian bullseye/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian bullseye/main i386 libsub-override-perl all 0.09-2 [10.2 kB] Get: 24 http://deb.debian.org/debian bullseye/main i386 libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 25 http://deb.debian.org/debian bullseye/main i386 dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 26 http://deb.debian.org/debian bullseye/main i386 libelf1 i386 0.183-1 [171 kB] Get: 27 http://deb.debian.org/debian bullseye/main i386 dwz i386 0.13+20210201-1 [179 kB] Get: 28 http://deb.debian.org/debian bullseye/main i386 libicu67 i386 67.1-6 [8776 kB] Get: 29 http://deb.debian.org/debian bullseye/main i386 libxml2 i386 2.9.10+dfsg-6.7 [728 kB] Get: 30 http://deb.debian.org/debian bullseye/main i386 gettext i386 0.21-4 [1322 kB] Get: 31 http://deb.debian.org/debian bullseye/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian bullseye/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 33 http://deb.debian.org/debian bullseye/main i386 debhelper all 13.3.4 [1049 kB] Get: 34 http://deb.debian.org/debian bullseye/main i386 libtext-unidecode-perl all 1.30-1 [103 kB] Get: 35 http://deb.debian.org/debian bullseye/main i386 libxml-namespacesupport-perl all 1.12-1.1 [14.9 kB] Get: 36 http://deb.debian.org/debian bullseye/main i386 libxml-sax-base-perl all 1.09-1.1 [20.7 kB] Get: 37 http://deb.debian.org/debian bullseye/main i386 libxml-sax-perl all 1.02+dfsg-1 [59.0 kB] Get: 38 http://deb.debian.org/debian bullseye/main i386 libxml-libxml-perl i386 2.0134+dfsg-2+b1 [353 kB] Get: 39 http://deb.debian.org/debian bullseye/main i386 texinfo i386 6.7.0.dfsg.2-6 [1766 kB] Fetched 21.0 MB in 0s (86.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19674 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-7_i386.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../01-libuchardet0_0.0.7-1_i386.deb ... Unpacking libuchardet0:i386 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_i386.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../03-libpipeline1_1.5.3-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_i386.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package ucf. Preparing to unpack .../06-ucf_3.0043_all.deb ... Moving old data out of the way Unpacking ucf (3.0043) ... Selecting previously unselected package tex-common. Preparing to unpack .../07-tex-common_6.16_all.deb ... Unpacking tex-common (6.16) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../08-libmagic-mgc_1%3a5.39-3_i386.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../09-libmagic1_1%3a5.39-3_i386.deb ... Unpacking libmagic1:i386 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../10-file_1%3a5.39-3_i386.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../11-gettext-base_0.21-4_i386.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../12-libsigsegv2_2.13-1_i386.deb ... Unpacking libsigsegv2:i386 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.18-5_i386.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../22-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../25-libelf1_0.183-1_i386.deb ... Unpacking libelf1:i386 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.13+20210201-1_i386.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:i386. Preparing to unpack .../27-libicu67_67.1-6_i386.deb ... Unpacking libicu67:i386 (67.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../28-libxml2_2.9.10+dfsg-6.7_i386.deb ... Unpacking libxml2:i386 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.21-4_i386.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libtext-unidecode-perl. Preparing to unpack .../33-libtext-unidecode-perl_1.30-1_all.deb ... Unpacking libtext-unidecode-perl (1.30-1) ... Selecting previously unselected package libxml-namespacesupport-perl. Preparing to unpack .../34-libxml-namespacesupport-perl_1.12-1.1_all.deb ... Unpacking libxml-namespacesupport-perl (1.12-1.1) ... Selecting previously unselected package libxml-sax-base-perl. Preparing to unpack .../35-libxml-sax-base-perl_1.09-1.1_all.deb ... Unpacking libxml-sax-base-perl (1.09-1.1) ... Selecting previously unselected package libxml-sax-perl. Preparing to unpack .../36-libxml-sax-perl_1.02+dfsg-1_all.deb ... Unpacking libxml-sax-perl (1.02+dfsg-1) ... Selecting previously unselected package libxml-libxml-perl. Preparing to unpack .../37-libxml-libxml-perl_2.0134+dfsg-2+b1_i386.deb ... Unpacking libxml-libxml-perl (2.0134+dfsg-2+b1) ... Selecting previously unselected package texinfo. Preparing to unpack .../38-texinfo_6.7.0.dfsg.2-6_i386.deb ... Unpacking texinfo (6.7.0.dfsg.2-6) ... Setting up libpipeline1:i386 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:i386 (67.1-6) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:i386 (1:5.39-3) ... Setting up libxml-namespacesupport-perl (1.12-1.1) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up libxml-sax-base-perl (1.09-1.1) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:i386 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:i386 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libtext-unidecode-perl (1.30-1) ... Setting up libelf1:i386 (0.183-1) ... Setting up libxml2:i386 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up ucf (3.0043) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libxml-sax-perl (1.02+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up dh-autoreconf (20) ... Setting up tex-common (6.16) ... update-language: texlive-base not installed and configured, doing nothing! Setting up libxml-libxml-perl (2.0134+dfsg-2+b1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up debhelper (13.3.4) ... Setting up texinfo (6.7.0.dfsg.2-6) ... Processing triggers for libc-bin (2.31-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/ssed-3.62/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package ssed dpkg-buildpackage: info: source version 3.62-7 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jose Antonio Quevedo dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp # Add here commands to clean up after the build process. rm -f config.guess config/config.guess config.sub config/config.sub [ ! -f Makefile ] || /usr/bin/make distclean dh_clean rm -f debian/debhelper-build-stamp rm -rf debian/.debhelper/ dh_clean: warning: Compatibility levels before 10 are deprecated (level 7 in use) rm -f -- debian/ssed.substvars debian/files rm -fr -- debian/ssed/ debian/tmp/ find . \( \( \ \( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path .\*/.hg -o -path .\*/CVS -o -path .\*/.pc -o -path .\*/_darcs \) -prune -o -type f -a \ \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \ -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \ -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \ -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \ \) -exec rm -f {} + \) -o \ \( -type d -a -name autom4te.cache -prune -exec rm -rf {} + \) \) debian/rules build dh_testdir cp -f /usr/share/misc/config.guess /usr/share/misc/config.sub . cp -f /usr/share/misc/config.guess /usr/share/misc/config.sub config ./configure --prefix=/usr --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --program-prefix=s \ CFLAGS="-g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security" CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" CXXFLAGS="-g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security" DFLAGS="-frelease" FCFLAGS="-g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong" FFLAGS="-g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong" GCJFLAGS="-g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong" LDFLAGS="-Wl,-z,relro" OBJCFLAGS="-g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security" OBJCXXFLAGS="-g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security" checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for ranlib... ranlib checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for AIX... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking for library containing strerror... none required checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking for _LARGE_FILES value needed for large files... no checking for long file names... yes checking whether -lcP is needed... no checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for io.h... no checking for limits.h... yes checking for locale.h... yes checking for stdarg.h... yes checking for alloca.h... yes checking for stddef.h... yes checking for errno.h... yes checking for wchar.h... yes checking for wctype.h... yes checking for sys/file.h... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking for ssize_t... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for working alloca.h... yes checking for alloca... yes checking for vprintf... yes checking for _doprnt... no checking for getline... yes checking for working getline function... yes checking for obstacks... yes checking whether mbrtowc and mbstate_t are properly declared... yes checking for mbstate_t... yes checking for strverscmp... yes checking for memchr... yes checking for memcmp... yes checking for memmove... yes checking for strerror... yes checking for snprintf... yes checking for mkstemp... yes checking for isatty... yes checking for bcopy... yes checking for bzero... yes checking for isascii... yes checking for memcpy... yes checking for memset... yes checking for strchr... yes checking for strtoul... yes checking for popen... yes checking for pathconf... yes checking for isblank... yes checking for fchown... yes checking for fchmod... yes checking for setlocale... yes checking for wcrtomb... yes checking for wcscoll... yes checking for btowc... yes checking how to build HTML documentation... with makeinfo checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for inline... inline checking for off_t... yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... yes checking whether we are using the GNU C Library 2.1 or newer... yes checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for iconv... yes checking argz.h usability... yes checking argz.h presence... yes checking for argz.h... yes checking for limits.h... (cached) yes checking for locale.h... (cached) yes checking nl_types.h usability... yes checking nl_types.h presence... yes checking for nl_types.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking for stddef.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking for feof_unlocked... yes checking for fgets_unlocked... yes checking for getc_unlocked... yes checking for getcwd... yes checking for getegid... yes checking for geteuid... yes checking for getgid... yes checking for getuid... yes checking for mempcpy... yes checking for munmap... yes checking for putenv... yes checking for setenv... yes checking for setlocale... (cached) yes checking for stpcpy... yes checking for strcasecmp... yes checking for strdup... yes checking for strtoul... (cached) yes checking for tsearch... yes checking for __argz_count... yes checking for __argz_stringify... yes checking for __argz_next... yes checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); checking for nl_langinfo and CODESET... yes checking for LC_MESSAGES... yes checking for bison... no checking whether NLS is requested... yes checking whether included gettext is requested... no checking for GNU gettext in libc... yes configure: creating ./config.status config.status: creating bootstrap.sh config.status: creating Makefile config.status: creating doc/Makefile config.status: creating lib/Makefile config.status: creating sed/Makefile config.status: creating testsuite/Makefile config.status: creating po/Makefile.in config.status: creating intl/Makefile config.status: creating pcre/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing default-1 commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing gettext-fix commands touch configure-stamp dh_testdir /usr/bin/make make[1]: Entering directory '/build/ssed-3.62' /usr/bin/make all-recursive make[2]: Entering directory '/build/ssed-3.62' Making all in intl make[3]: Entering directory '/build/ssed-3.62/intl' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/ssed-3.62/intl' Making all in lib make[3]: Entering directory '/build/ssed-3.62/lib' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT getopt1.o -MD -MP -MF ".deps/getopt1.Tpo" -c -o getopt1.o getopt1.c; \ then mv -f ".deps/getopt1.Tpo" ".deps/getopt1.Po"; else rm -f ".deps/getopt1.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT getopt.o -MD -MP -MF ".deps/getopt.Tpo" -c -o getopt.o getopt.c; \ then mv -f ".deps/getopt.Tpo" ".deps/getopt.Po"; else rm -f ".deps/getopt.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT utils.o -MD -MP -MF ".deps/utils.Tpo" -c -o utils.o utils.c; \ then mv -f ".deps/utils.Tpo" ".deps/utils.Po"; else rm -f ".deps/utils.Tpo"; exit 1; fi utils.c: In function 'panic': utils.c:96:4: warning: implicit declaration of function 'unlink' [-Wimplicit-function-declaration] 96 | unlink (open_files->name); | ^~~~~~ rm -f libsed.a ar cru libsed.a getopt1.o getopt.o utils.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libsed.a make[3]: Leaving directory '/build/ssed-3.62/lib' Making all in pcre make[3]: Entering directory '/build/ssed-3.62/pcre' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regtables.o -MD -MP -MF ".deps/regtables.Tpo" -c -o regtables.o regtables.c; \ then mv -f ".deps/regtables.Tpo" ".deps/regtables.Po"; else rm -f ".deps/regtables.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regsub.o -MD -MP -MF ".deps/regsub.Tpo" -c -o regsub.o regsub.c; \ then mv -f ".deps/regsub.Tpo" ".deps/regsub.Po"; else rm -f ".deps/regsub.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regstudy.o -MD -MP -MF ".deps/regstudy.Tpo" -c -o regstudy.o regstudy.c; \ then mv -f ".deps/regstudy.Tpo" ".deps/regstudy.Po"; else rm -f ".deps/regstudy.Tpo"; exit 1; fi regstudy.c: In function 'prune_backtracking_paths': regstudy.c:1233:18: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1233 | uschar *code = re->code; | ^~ if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regposix.o -MD -MP -MF ".deps/regposix.Tpo" -c -o regposix.o regposix.c; \ then mv -f ".deps/regposix.Tpo" ".deps/regposix.Po"; else rm -f ".deps/regposix.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regperl.o -MD -MP -MF ".deps/regperl.Tpo" -c -o regperl.o regperl.c; \ then mv -f ".deps/regperl.Tpo" ".deps/regperl.Po"; else rm -f ".deps/regperl.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT reginfo.o -MD -MP -MF ".deps/reginfo.Tpo" -c -o reginfo.o reginfo.c; \ then mv -f ".deps/reginfo.Tpo" ".deps/reginfo.Po"; else rm -f ".deps/reginfo.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regexec.o -MD -MP -MF ".deps/regexec.Tpo" -c -o regexec.o regexec.c; \ then mv -f ".deps/regexec.Tpo" ".deps/regexec.Po"; else rm -f ".deps/regexec.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regexp.o -MD -MP -MF ".deps/regexp.Tpo" -c -o regexp.o regexp.c; \ then mv -f ".deps/regexp.Tpo" ".deps/regexp.Po"; else rm -f ".deps/regexp.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regdebug.o -MD -MP -MF ".deps/regdebug.Tpo" -c -o regdebug.o regdebug.c; \ then mv -f ".deps/regdebug.Tpo" ".deps/regdebug.Po"; else rm -f ".deps/regdebug.Tpo"; exit 1; fi rm -f libpcre.a ar cru libpcre.a regtables.o regsub.o regstudy.o regposix.o regperl.o reginfo.o regexec.o regexp.o regdebug.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libpcre.a make[3]: Leaving directory '/build/ssed-3.62/pcre' Making all in po make[3]: Entering directory '/build/ssed-3.62/po' rm -f de.gmo && /usr/bin/msgfmt -c --statistics -o de.gmo de.po de.po:6: warning: header field 'Language' missing in header 20 translated messages, 37 fuzzy translations, 52 untranslated messages. make[3]: Leaving directory '/build/ssed-3.62/po' Making all in sed make[3]: Entering directory '/build/ssed-3.62/sed' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT sed.o -MD -MP -MF ".deps/sed.Tpo" -c -o sed.o sed.c; \ then mv -f ".deps/sed.Tpo" ".deps/sed.Po"; else rm -f ".deps/sed.Tpo"; exit 1; fi sed.c: In function 'main': sed.c:178:3: warning: implicit declaration of function 'initialize_mbcs'; did you mean 'initialize_main'? [-Wimplicit-function-declaration] 178 | initialize_mbcs (); | ^~~~~~~~~~~~~~~ | initialize_main if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT compile.o -MD -MP -MF ".deps/compile.Tpo" -c -o compile.o compile.c; \ then mv -f ".deps/compile.Tpo" ".deps/compile.Po"; else rm -f ".deps/compile.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT execute.o -MD -MP -MF ".deps/execute.Tpo" -c -o execute.o execute.c; \ then mv -f ".deps/execute.Tpo" ".deps/execute.Po"; else rm -f ".deps/execute.Tpo"; exit 1; fi execute.c: In function 'open_next_file': execute.c:693:9: warning: ignoring return value of 'fchown' declared with attribute 'warn_unused_result' [-Wunused-result] 693 | fchown (output_fd, -1, st.st_gid); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regexp.o -MD -MP -MF ".deps/regexp.Tpo" -c -o regexp.o regexp.c; \ then mv -f ".deps/regexp.Tpo" ".deps/regexp.Po"; else rm -f ".deps/regexp.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT fmt.o -MD -MP -MF ".deps/fmt.Tpo" -c -o fmt.o fmt.c; \ then mv -f ".deps/fmt.Tpo" ".deps/fmt.Po"; else rm -f ".deps/fmt.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT mbcs.o -MD -MP -MF ".deps/mbcs.Tpo" -c -o mbcs.o mbcs.c; \ then mv -f ".deps/mbcs.Tpo" ".deps/mbcs.Po"; else rm -f ".deps/mbcs.Tpo"; exit 1; fi gcc -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o sed sed.o compile.o execute.o regexp.o fmt.o mbcs.o ../pcre/libpcre.a ../lib/libsed.a make[3]: Leaving directory '/build/ssed-3.62/sed' Making all in doc make[3]: Entering directory '/build/ssed-3.62/doc' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/ssed-3.62/doc' Making all in testsuite make[3]: Entering directory '/build/ssed-3.62/testsuite' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/ssed-3.62/testsuite' make[3]: Entering directory '/build/ssed-3.62' make[3]: Leaving directory '/build/ssed-3.62' make[2]: Leaving directory '/build/ssed-3.62' make[1]: Leaving directory '/build/ssed-3.62' /usr/bin/make check make[1]: Entering directory '/build/ssed-3.62' Making check in intl make[2]: Entering directory '/build/ssed-3.62/intl' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/intl' Making check in lib make[2]: Entering directory '/build/ssed-3.62/lib' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/lib' Making check in pcre make[2]: Entering directory '/build/ssed-3.62/pcre' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/pcre' Making check in po make[2]: Entering directory '/build/ssed-3.62/po' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/po' Making check in sed make[2]: Entering directory '/build/ssed-3.62/sed' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/sed' Making check in doc make[2]: Entering directory '/build/ssed-3.62/doc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/doc' Making check in testsuite make[2]: Entering directory '/build/ssed-3.62/testsuite' /usr/bin/make pcretest make[3]: Entering directory '/build/ssed-3.62/testsuite' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../lib -I../pcre -I../intl -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT pcretest.o -MD -MP -MF ".deps/pcretest.Tpo" -c -o pcretest.o pcretest.c; \ then mv -f ".deps/pcretest.Tpo" ".deps/pcretest.Po"; else rm -f ".deps/pcretest.Tpo"; exit 1; fi pcretest.c: In function 'main': pcretest.c:245:11: warning: implicit declaration of function 'isatty' [-Wimplicit-function-declaration] 245 | if (isatty (fileno (infile))) | ^~~~~~ gcc -g -O2 -fdebug-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o pcretest pcretest.o ../pcre/libpcre.a ../lib/libsed.a make[3]: Leaving directory '/build/ssed-3.62/testsuite' /usr/bin/make check-TESTS make[3]: Entering directory '/build/ssed-3.62/testsuite' PASS: pcretest PASS: space PASS: appquit PASS: enable PASS: sep PASS: inclib PASS: 8bit PASS: newjis PASS: xabcx PASS: dollar PASS: noeol PASS: noeolw PASS: numsub PASS: numsub2 PASS: numsub3 PASS: numsub4 PASS: numsub5 PASS: 0range PASS: bkslashes PASS: head PASS: madding PASS: mac-mf PASS: empty PASS: xbxcx PASS: xbxcx3 PASS: recall PASS: recall2 PASS: xemacs PASS: fasts PASS: uniq PASS: manis PASS: khadafy PASS: linecnt PASS: eval PASS: distrib PASS: 8to7 PASS: allsub PASS: cv-vars PASS: classes PASS: middle PASS: bsd PASS: stdin PASS: flipcase PASS: insens PASS: subwrite PASS: writeout PASS: readin PASS: help PASS: version PASS: file PASS: quiet PASS: factor PASS: binary3 PASS: binary2 PASS: binary PASS: dc =================== All 56 tests passed =================== make[3]: Leaving directory '/build/ssed-3.62/testsuite' make[2]: Leaving directory '/build/ssed-3.62/testsuite' make[2]: Entering directory '/build/ssed-3.62' make[2]: Leaving directory '/build/ssed-3.62' make[1]: Leaving directory '/build/ssed-3.62' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep rm -f -- debian/ssed.substvars rm -fr -- debian/.debhelper/generated/ssed/ debian/ssed/ debian/tmp/ dh_installdirs dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 7 in use) install -d debian/ssed install -d debian/ssed/usr/bin debian/ssed/usr/share /usr/bin/make install DESTDIR=/build/ssed-3.62/debian/ssed make[1]: Entering directory '/build/ssed-3.62' Making install in intl make[2]: Entering directory '/build/ssed-3.62/intl' if test "ssed" = "gettext" \ && test '' = 'intl-compat.o'; then \ mkdir -p -- /build/ssed-3.62/debian/ssed/usr/lib /build/ssed-3.62/debian/ssed/usr/include; \ /usr/bin/install -c -m 644 libintl.h /build/ssed-3.62/debian/ssed/usr/include/libintl.h; \ @LIBTOOL@ --mode=install \ /usr/bin/install -c -m 644 libintl.a /build/ssed-3.62/debian/ssed/usr/lib/libintl.a; \ else \ : ; \ fi if test 'no' = yes; then \ test yes != no || mkdir -p -- /build/ssed-3.62/debian/ssed/usr/lib; \ temp=/build/ssed-3.62/debian/ssed/usr/lib/t-charset.alias; \ dest=/build/ssed-3.62/debian/ssed/usr/lib/charset.alias; \ if test -f /build/ssed-3.62/debian/ssed/usr/lib/charset.alias; then \ orig=/build/ssed-3.62/debian/ssed/usr/lib/charset.alias; \ sed -f ref-add.sed $orig > $temp; \ /usr/bin/install -c -m 644 $temp $dest; \ rm -f $temp; \ else \ if test yes = no; then \ orig=charset.alias; \ sed -f ref-add.sed $orig > $temp; \ /usr/bin/install -c -m 644 $temp $dest; \ rm -f $temp; \ fi; \ fi; \ mkdir -p -- /build/ssed-3.62/debian/ssed/usr/share/locale; \ test -f /build/ssed-3.62/debian/ssed/usr/share/locale/locale.alias \ && orig=/build/ssed-3.62/debian/ssed/usr/share/locale/locale.alias \ || orig=./locale.alias; \ temp=/build/ssed-3.62/debian/ssed/usr/share/locale/t-locale.alias; \ dest=/build/ssed-3.62/debian/ssed/usr/share/locale/locale.alias; \ sed -f ref-add.sed $orig > $temp; \ /usr/bin/install -c -m 644 $temp $dest; \ rm -f $temp; \ else \ : ; \ fi if test "ssed" = "gettext"; then \ mkdir -p -- /build/ssed-3.62/debian/ssed/usr/share/gettext/intl; \ /usr/bin/install -c -m 644 VERSION /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/VERSION; \ /usr/bin/install -c -m 644 ChangeLog.inst /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/ChangeLog; \ dists="COPYING.LIB-2.0 COPYING.LIB-2.1 Makefile.in config.charset locale.alias ref-add.sin ref-del.sin gmo.h gettextP.h hash-string.h plural-exp.h eval-plural.h os2compat.h libgnuintl.h loadinfo.h bindtextdom.c dcgettext.c dgettext.c gettext.c finddomain.c loadmsgcat.c localealias.c textdomain.c l10nflist.c explodename.c dcigettext.c dcngettext.c dngettext.c ngettext.c plural.y plural-exp.c localcharset.c localename.c osdep.c os2compat.c intl-compat.c"; \ for file in $dists; do \ /usr/bin/install -c -m 644 ./$file \ /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/$file; \ done; \ chmod a+x /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/config.charset; \ dists="plural.c"; \ for file in $dists; do \ if test -f $file; then dir=.; else dir=.; fi; \ /usr/bin/install -c -m 644 $dir/$file \ /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/$file; \ done; \ dists="xopen-msg.sed linux-msg.sed po2tbl.sed.in cat-compat.c COPYING.LIB-2 gettext.h libgettext.h plural-eval.c"; \ for file in $dists; do \ rm -f /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/build/ssed-3.62/intl' Making install in lib make[2]: Entering directory '/build/ssed-3.62/lib' make[3]: Entering directory '/build/ssed-3.62/lib' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62/lib' make[2]: Leaving directory '/build/ssed-3.62/lib' Making install in pcre make[2]: Entering directory '/build/ssed-3.62/pcre' make[3]: Entering directory '/build/ssed-3.62/pcre' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62/pcre' make[2]: Leaving directory '/build/ssed-3.62/pcre' Making install in po make[2]: Entering directory '/build/ssed-3.62/po' mkdir -p -- /build/ssed-3.62/debian/ssed/usr/share installing af.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/af/LC_MESSAGES/ssed.mo installing ca.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ca/LC_MESSAGES/ssed.mo installing cs.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/cs/LC_MESSAGES/ssed.mo installing da.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/da/LC_MESSAGES/ssed.mo installing de.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/de/LC_MESSAGES/ssed.mo installing el.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/el/LC_MESSAGES/ssed.mo installing eo.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/eo/LC_MESSAGES/ssed.mo installing es.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/es/LC_MESSAGES/ssed.mo installing et.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/et/LC_MESSAGES/ssed.mo installing fi.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/fi/LC_MESSAGES/ssed.mo installing fr.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/fr/LC_MESSAGES/ssed.mo installing ga.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ga/LC_MESSAGES/ssed.mo installing gl.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/gl/LC_MESSAGES/ssed.mo installing he.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/he/LC_MESSAGES/ssed.mo installing hr.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/hr/LC_MESSAGES/ssed.mo installing hu.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/hu/LC_MESSAGES/ssed.mo installing id.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/id/LC_MESSAGES/ssed.mo installing it.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/it/LC_MESSAGES/ssed.mo installing ja.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ja/LC_MESSAGES/ssed.mo installing ko.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ko/LC_MESSAGES/ssed.mo installing nl.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/nl/LC_MESSAGES/ssed.mo installing pl.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/pl/LC_MESSAGES/ssed.mo installing pt_BR.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/pt_BR/LC_MESSAGES/ssed.mo installing ro.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ro/LC_MESSAGES/ssed.mo installing ru.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ru/LC_MESSAGES/ssed.mo installing sk.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/sk/LC_MESSAGES/ssed.mo installing sl.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/sl/LC_MESSAGES/ssed.mo installing sr.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/sr/LC_MESSAGES/ssed.mo installing sv.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/sv/LC_MESSAGES/ssed.mo installing tr.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/tr/LC_MESSAGES/ssed.mo installing zh_CN.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/zh_CN/LC_MESSAGES/ssed.mo if test "ssed" = "gettext"; then \ mkdir -p -- /build/ssed-3.62/debian/ssed/usr/share/gettext/po; \ for file in Makefile.in.in Makevars quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot ; do \ /usr/bin/install -c -m 644 ./$file \ /build/ssed-3.62/debian/ssed/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/build/ssed-3.62/po' Making install in sed make[2]: Entering directory '/build/ssed-3.62/sed' make[3]: Entering directory '/build/ssed-3.62/sed' test -z "/usr/bin" || mkdir -p -- "/build/ssed-3.62/debian/ssed/usr/bin" /usr/bin/install -c 'sed' '/build/ssed-3.62/debian/ssed/usr/bin/ssed' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62/sed' make[2]: Leaving directory '/build/ssed-3.62/sed' Making install in doc make[2]: Entering directory '/build/ssed-3.62/doc' make[3]: Entering directory '/build/ssed-3.62/doc' make[3]: Nothing to be done for 'install-exec-am'. test -z "" || mkdir -p -- "/build/ssed-3.62/debian/ssed" test -z "/usr/share/info" || mkdir -p -- "/build/ssed-3.62/debian/ssed/usr/share/info" /usr/bin/install -c -m 644 './sed.info' '/build/ssed-3.62/debian/ssed/usr/share/info/sed.info' test -z "/usr/share/man/man1" || mkdir -p -- "/build/ssed-3.62/debian/ssed/usr/share/man/man1" /usr/bin/install -c -m 644 './sed.1' '/build/ssed-3.62/debian/ssed/usr/share/man/man1/ssed.1' make[3]: Leaving directory '/build/ssed-3.62/doc' make[2]: Leaving directory '/build/ssed-3.62/doc' Making install in testsuite make[2]: Entering directory '/build/ssed-3.62/testsuite' make[3]: Entering directory '/build/ssed-3.62/testsuite' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62/testsuite' make[2]: Leaving directory '/build/ssed-3.62/testsuite' make[2]: Entering directory '/build/ssed-3.62' make[3]: Entering directory '/build/ssed-3.62' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62' make[2]: Leaving directory '/build/ssed-3.62' make[1]: Leaving directory '/build/ssed-3.62' dh_testdir dh_testroot dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 7 in use) install -d debian/ssed/usr/share/doc/ssed install -d debian/.debhelper/generated/ssed cp --reflink=auto -a ./BUGS debian/ssed/usr/share/doc/ssed cp --reflink=auto -a ./NEWS debian/ssed/usr/share/doc/ssed cp --reflink=auto -a ./README debian/ssed/usr/share/doc/ssed cp --reflink=auto -a ./AUTHORS debian/ssed/usr/share/doc/ssed cp --reflink=auto -a ./TODO debian/ssed/usr/share/doc/ssed chown -R 0:0 debian/ssed/usr/share/doc chmod -R u\+rw,go=rX debian/ssed/usr/share/doc install -p -m0644 debian/README.Debian debian/ssed/usr/share/doc/ssed/README.Debian install -p -m0644 debian/copyright debian/ssed/usr/share/doc/ssed/copyright dh_installexamples dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installman dh_installman: warning: Compatibility levels before 10 are deprecated (level 7 in use) man-recode --to-code UTF-8 --suffix .dh-new debian/ssed/usr/share/man/man1/ssed.1 mv debian/ssed/usr/share/man/man1/ssed.1.dh-new debian/ssed/usr/share/man/man1/ssed.1 chmod 0644 -- debian/ssed/usr/share/man/man1/ssed.1 # Adjust info files to say ssed instead of sed set -e; cd /build/ssed-3.62/debian/ssed/usr/share/info; \ for f in *; do \ sed -e 's/^\* sed: (sed)/\* ssed: (ssed)/' \ -e 's/sed.info/ssed.info/' $f > s$f; \ rm $f; \ done; \ rm -f sdir dh_installchangelogs ChangeLog install -p -m0644 debian/changelog debian/ssed/usr/share/doc/ssed/changelog.Debian install -p -m0644 ChangeLog debian/ssed/usr/share/doc/ssed/changelog dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 7 in use) install -d debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/44 objcopy --only-keep-debug --compress-debug-sections debian/ssed/usr/bin/ssed debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/44/44cfea2df2b92ad9db1c6aa8ab2c3be47f5df0.debug chmod 0644 -- debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/44/44cfea2df2b92ad9db1c6aa8ab2c3be47f5df0.debug chown 0:0 -- debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/44/44cfea2df2b92ad9db1c6aa8ab2c3be47f5df0.debug strip --remove-section=.comment --remove-section=.note debian/ssed/usr/bin/ssed objcopy --add-gnu-debuglink debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/44/44cfea2df2b92ad9db1c6aa8ab2c3be47f5df0.debug debian/ssed/usr/bin/ssed install -d debian/.debhelper/ssed/dbgsym-root/usr/share/doc ln -s ssed debian/.debhelper/ssed/dbgsym-root/usr/share/doc/ssed-dbgsym dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 7 in use) cd debian/ssed chmod a-x usr/share/doc/ssed/BUGS usr/share/doc/ssed/NEWS usr/share/doc/ssed/changelog usr/share/doc/ssed/changelog.Debian usr/share/info/ssed.info usr/share/man/man1/ssed.1 gzip -9nf usr/share/doc/ssed/BUGS usr/share/doc/ssed/NEWS usr/share/doc/ssed/changelog usr/share/doc/ssed/changelog.Debian usr/share/info/ssed.info usr/share/man/man1/ssed.1 cd '/build/ssed-3.62' dh_fixperms find debian/ssed -true -print0 2>/dev/null | xargs -0r chown --no-dereference 0:0 find debian/ssed ! -type l -a -true -a -true -print0 2>/dev/null | xargs -0r chmod go=rX,u+rw,a-s find debian/ssed/usr/share/doc -type f -a -true -a ! -regex 'debian/ssed/usr/share/doc/[^/]*/examples/.*' -print0 2>/dev/null | xargs -0r chmod 0644 find debian/ssed/usr/share/doc -type d -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0755 find debian/ssed/usr/share/man -type f -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0644 find debian/ssed -type f \( -name '*.so.*' -o -name '*.so' -o -name '*.la' -o -name '*.a' -o -name '*.js' -o -name '*.css' -o -name '*.scss' -o -name '*.sass' -o -name '*.jpeg' -o -name '*.jpg' -o -name '*.png' -o -name '*.gif' -o -name '*.cmxs' -o -name '*.node' \) -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0644 find debian/ssed/usr/bin -type f -a -true -a -true -print0 2>/dev/null | xargs -0r chmod a+x dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 7 in use) install -d debian/ssed/DEBIAN dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 7 in use) dpkg-shlibdeps -Tdebian/ssed.substvars debian/ssed/usr/bin/ssed dh_gencontrol echo misc:Depends= >> debian/ssed.substvars echo misc:Pre-Depends= >> debian/ssed.substvars install -d debian/.debhelper/ssed/dbgsym-root/DEBIAN dpkg-gencontrol -pssed -ldebian/changelog -Tdebian/ssed.substvars -Pdebian/.debhelper/ssed/dbgsym-root -UPre-Depends -URecommends -USuggests -UEnhances -UProvides -UEssential -UConflicts -DPriority=optional -UHomepage -UImportant -UBuilt-Using -DAuto-Built-Package=debug-symbols -UProtected -DPackage=ssed-dbgsym "-DDepends=ssed (= \${binary:Version})" "-DDescription=debug symbols for ssed" -DBuild-Ids=4444cfea2df2b92ad9db1c6aa8ab2c3be47f5df0 -DSection=debug -UMulti-Arch -UReplaces -UBreaks chmod 0644 -- debian/.debhelper/ssed/dbgsym-root/DEBIAN/control chown 0:0 -- debian/.debhelper/ssed/dbgsym-root/DEBIAN/control dpkg-gencontrol -pssed -ldebian/changelog -Tdebian/ssed.substvars -Pdebian/ssed chmod 0644 -- debian/ssed/DEBIAN/control chown 0:0 -- debian/ssed/DEBIAN/control dh_md5sums cd debian/ssed >/dev/null && xargs -r0 md5sum | perl -pe 'if (s@^\\@@) { s/\\\\/\\/g; }' > DEBIAN/md5sums chmod 0644 -- debian/ssed/DEBIAN/md5sums chown 0:0 -- debian/ssed/DEBIAN/md5sums cd debian/.debhelper/ssed/dbgsym-root >/dev/null && xargs -r0 md5sum | perl -pe 'if (s@^\\@@) { s/\\\\/\\/g; }' > DEBIAN/md5sums chmod 0644 -- debian/.debhelper/ssed/dbgsym-root/DEBIAN/md5sums chown 0:0 -- debian/.debhelper/ssed/dbgsym-root/DEBIAN/md5sums dh_builddeb dpkg-deb --build debian/ssed .. dpkg-deb --build debian/.debhelper/ssed/dbgsym-root .. dpkg-deb: building package 'ssed' in '../ssed_3.62-7_i386.deb'. dpkg-deb: building package 'ssed-dbgsym' in '../ssed-dbgsym_3.62-7_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../ssed_3.62-7_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/18526 and its subdirectories I: Current time: Sat Jul 2 02:45:35 -12 2022 I: pbuilder-time-stamp: 1656773135 Sun May 30 08:22:36 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ionos12-i386.debian.net. Sun May 30 08:22:36 UTC 2021 I: Preparing to do remote build '2' on ionos12-i386.debian.net. Sun May 30 08:28:23 UTC 2021 I: Deleting $TMPDIR on ionos12-i386.debian.net. Sun May 30 08:28:24 UTC 2021 I: ssed_3.62-7_i386.changes: Format: 1.8 Date: Sat, 14 Jul 2012 02:46:05 +0200 Source: ssed Binary: ssed ssed-dbgsym Architecture: i386 Version: 3.62-7 Distribution: unstable Urgency: low Maintainer: Jose Antonio Quevedo Muñoz Changed-By: Jose Antonio Quevedo Description: ssed - The super sed stream editor Closes: 565360 Changes: ssed (3.62-7) unstable; urgency=low . * Updated maintainer field (closes: #565360) * Added dpkg-buildflags to enable hardening. Checksums-Sha1: 0989ba0890a299706bfb7c18107e204625090a9b 130704 ssed-dbgsym_3.62-7_i386.deb f18e3c0abc965b2bdfc7df891c8761a27d2b6f9f 5047 ssed_3.62-7_i386.buildinfo 16eb64864847a3003cde6c8608953774b8396d6e 174736 ssed_3.62-7_i386.deb Checksums-Sha256: 0e5fac6f07dd05b3c8c334b6e5650a7c9ac611320baa518e65ab2964533945fc 130704 ssed-dbgsym_3.62-7_i386.deb 7bfff0ac286a938b7e2ef5ff65a533c9e51a9d73896110e0d2f15acd9a741382 5047 ssed_3.62-7_i386.buildinfo 8ccdc8f7a3cfd0b7e82d39bbd32acde830bc61f67158019af0ee140773e3e51f 174736 ssed_3.62-7_i386.deb Files: 8858bc70537563e41059ccad35575810 130704 debug optional ssed-dbgsym_3.62-7_i386.deb 090b6189db0c4323a0bc2326371aebc2 5047 utils extra ssed_3.62-7_i386.buildinfo 5452db60aaac3f3ba2f43d687f1ecdff 174736 utils extra ssed_3.62-7_i386.deb Sun May 30 08:28:25 UTC 2021 I: diffoscope 172 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.Kps6drducJ/ssed_3.62-7.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.Kps6drducJ/ssed_3.62-7.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.Kps6drducJ/ssed_3.62-7.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.Kps6drducJ/b1/ssed_3.62-7_i386.changes /srv/reproducible-results/rbuild-debian/tmp.Kps6drducJ/b2/ssed_3.62-7_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.341s) 0.341s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.020s) 0.020s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sun May 30 08:28:28 UTC 2021 I: diffoscope 172 found no differences in the changes files, and a .buildinfo file also exists. Sun May 30 08:28:28 UTC 2021 I: ssed from bullseye built successfully and reproducibly on i386. Sun May 30 08:28:29 UTC 2021 I: Submitting .buildinfo files to external archives: Sun May 30 08:28:29 UTC 2021 I: Submitting 8.0K b1/ssed_3.62-7_i386.buildinfo.asc Sun May 30 08:28:30 UTC 2021 I: Submitting 8.0K b2/ssed_3.62-7_i386.buildinfo.asc Sun May 30 08:28:31 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun May 30 08:28:31 UTC 2021 I: Done submitting .buildinfo files. Sun May 30 08:28:31 UTC 2021 I: Removing signed ssed_3.62-7_i386.buildinfo.asc files: removed './b1/ssed_3.62-7_i386.buildinfo.asc' removed './b2/ssed_3.62-7_i386.buildinfo.asc'