Wed Jun 9 22:01:14 UTC 2021 I: starting to build shellia/bullseye/i386 on jenkins on '2021-06-09 22:01' Wed Jun 9 22:01:14 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_15/13258/console.log Wed Jun 9 22:01:14 UTC 2021 I: Downloading source for bullseye/shellia=5.6.5 --2021-06-09 22:01:14-- http://cdn-fastly.deb.debian.org/debian/pool/main/s/shellia/shellia_5.6.5.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1544 (1.5K) Saving to: ‘shellia_5.6.5.dsc’ 0K . 100% 125M=0s 2021-06-09 22:01:14 (125 MB/s) - ‘shellia_5.6.5.dsc’ saved [1544/1544] Wed Jun 9 22:01:14 UTC 2021 I: shellia_5.6.5.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: shellia Binary: shellia Architecture: all Version: 5.6.5 Maintainer: Bernd Schumacher Homepage: https://salsa.debian.org/bs/shellia Standards-Version: 3.9.8 Build-Depends: debhelper (>= 9.0.0), dash, busybox, mksh, posh, python3-docutils, time, bc, gawk Package-List: shellia deb libs optional arch=all Checksums-Sha1: 3cc77774515811827787e921911d2d29533d7f4e 48292 shellia_5.6.5.tar.xz Checksums-Sha256: fe0e97e9ff74183b2138b538e82deeef10d3fcc316987373687f42d1e3975603 48292 shellia_5.6.5.tar.xz Files: c90b74407aa3f7cedc099ef7638c5c9a 48292 shellia_5.6.5.tar.xz -----BEGIN PGP SIGNATURE----- iQJNBAEBCgA3FiEEx5NNNf+H1Sb3l9vqxRmiDRIUYfcFAl+jno4ZHGJlcm5kLnNj aHVtYWNoZXJAaHBlLmNvbQAKCRDFGaINEhRh97UKD/oCz0CBpaNF9HmXAdBauIw9 v8uj1m1p3B2e40sTWo80AgRRR1NWO7Wk63KonAB/pEhJVPHkFabtjCs17V6iSAYa v9ZM+3ofvovXIikD0qdv3UQGPkE3QpV5Ms3HrCtycm3Gv6lKgrbcRrEIqafewPSZ 6/w3SheerRavLveJkVP2khF6JIalVEwzRZQt1fdLXPIsMti892m469CLYTuZCKuy odtMrEq5/2kQaM1ZG2zGeAG8WlW5n8oFfWdJRTonpe5A8UrViO/P0oHWU+uClms2 vqLxNgyBB+xB2ZoSov2td7ou78qw5O3D8XXUQUzQgROn1XVMPoYo0AuWf02M4Tp4 kLBSNNuZ0mON7zsYCYpd2S+cCiiSrZo3qMIXaVrg+iA0hwtn+p9jwsXRYSMdMSmJ JHVPCYn3h9h9q+xTELX0/UGbQ/VSA4GECtbS7V0P16X65N689d/JMeVqjLV/1Pyk 7Mw/3e9MSMRkxFH+a4jknIgi9v+ysA7NOwj4mTFxH8Vt1fwPx4AY1KckUJZRphVG VZcg4Gpoy8CrujgKeLK3yHXHZ1d6qS57P4nagwWnFxesxorgVPepcRgU/QBNDWGE 8y1UVSoHcnWCHtiU25Hxm1b9CNUz/AaGrHYpTqd/vxPFaTTohR8pI96uOSiNpsqq tKzF+IBaB3usW6OH/tfSEA== =c6fd -----END PGP SIGNATURE----- Wed Jun 9 22:01:14 UTC 2021 I: Checking whether the package is not for us Wed Jun 9 22:01:14 UTC 2021 I: Starting 1st build on remote node ionos12-i386.debian.net. Wed Jun 9 22:01:14 UTC 2021 I: Preparing to do remote build '1' on ionos12-i386.debian.net. Wed Jun 9 22:14:00 UTC 2021 I: Deleting $TMPDIR on ionos12-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Jun 9 10:01:16 -12 2021 I: pbuilder-time-stamp: 1623276076 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [shellia_5.6.5.dsc] I: copying [./shellia_5.6.5.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.7bbiSuHu/trustedkeys.kbx': General error gpgv: Signature made Wed Nov 4 18:41:18 2020 -12 gpgv: using RSA key C7934D35FF87D526F797DBEAC519A20D121461F7 gpgv: issuer "bernd.schumacher@hpe.com" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./shellia_5.6.5.dsc dpkg-source: info: extracting shellia in shellia-5.6.5 dpkg-source: info: unpacking shellia_5.6.5.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/23748/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=10' DISTRIBUTION='' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='3323e42f1cd54e8ead07076e91954abc' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='23748' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.00gy0f2aiO/pbuilderrc_GXXW --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.00gy0f2aiO/b1 --logfile b1/build.log shellia_5.6.5.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://78.137.99.97:3128' I: uname -a Linux ionos12-i386 4.19.0-16-686-pae #1 SMP Debian 4.19.181-1 (2021-03-19) i686 GNU/Linux I: ls -l /bin total 5780 -rwxr-xr-x 1 root root 1367848 Feb 24 08:57 bash -rwxr-xr-x 3 root root 38280 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 17768 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 38824 Sep 22 2020 cat -rwxr-xr-x 1 root root 71624 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 67528 Sep 22 2020 chmod -rwxr-xr-x 1 root root 75752 Sep 22 2020 chown -rwxr-xr-x 1 root root 157960 Sep 22 2020 cp -rwxr-xr-x 1 root root 128724 Dec 10 01:23 dash -rwxr-xr-x 1 root root 124904 Sep 22 2020 date -rwxr-xr-x 1 root root 92172 Sep 22 2020 dd -rwxr-xr-x 1 root root 100752 Sep 22 2020 df -rwxr-xr-x 1 root root 153964 Sep 22 2020 dir -rwxr-xr-x 1 root root 83644 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 34664 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 34664 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 71928 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 30112 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 210488 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 100952 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 21916 Nov 6 2019 hostname -rwxr-xr-x 1 root root 83980 Sep 22 2020 ln -rwxr-xr-x 1 root root 55572 Feb 7 2020 login -rwxr-xr-x 1 root root 153964 Sep 22 2020 ls -rwxr-xr-x 1 root root 153124 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 96328 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 79912 Sep 22 2020 mknod -rwxr-xr-x 1 root root 47048 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 58920 Feb 7 02:38 more -rwsr-xr-x 1 root root 50720 Feb 7 02:38 mount -rwxr-xr-x 1 root root 13856 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 157996 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 38824 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Feb 24 08:57 rbash -> bash -rwxr-xr-x 1 root root 46984 Sep 22 2020 readlink -rwxr-xr-x 1 root root 75720 Sep 22 2020 rm -rwxr-xr-x 1 root root 46984 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 22292 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 125036 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jun 7 21:26 sh -> dash -rwxr-xr-x 1 root root 34696 Sep 22 2020 sleep -rwxr-xr-x 1 root root 83880 Sep 22 2020 stty -rwsr-xr-x 1 root root 79396 Feb 7 02:38 su -rwxr-xr-x 1 root root 34696 Sep 22 2020 sync -rwxr-xr-x 1 root root 602584 Feb 16 21:55 tar -rwxr-xr-x 1 root root 13860 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 108520 Sep 22 2020 touch -rwxr-xr-x 1 root root 34664 Sep 22 2020 true -rwxr-xr-x 1 root root 17768 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 30236 Feb 7 02:38 umount -rwxr-xr-x 1 root root 34664 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 153964 Sep 22 2020 vdir -rwxr-xr-x 1 root root 63024 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/23748/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9.0.0), dash, busybox, mksh, posh, python3-docutils, time, bc, gawk dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19675 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9.0.0); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on busybox; however: Package busybox is not installed. pbuilder-satisfydepends-dummy depends on mksh; however: Package mksh is not installed. pbuilder-satisfydepends-dummy depends on posh; however: Package posh is not installed. pbuilder-satisfydepends-dummy depends on python3-docutils; however: Package python3-docutils is not installed. pbuilder-satisfydepends-dummy depends on time; however: Package time is not installed. pbuilder-satisfydepends-dummy depends on bc; however: Package bc is not installed. pbuilder-satisfydepends-dummy depends on gawk; however: Package gawk is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bc{a} bsdextrautils{a} busybox{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} docutils-common{a} dwz{a} file{a} gawk{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libmpdec3{a} libncurses6{a} libpipeline1{a} libpython3-stdlib{a} libpython3.9-minimal{a} libpython3.9-stdlib{a} libreadline8{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} mksh{a} po-debconf{a} posh{a} python3{a} python3-docutils{a} python3-minimal{a} python3-roman{a} python3.9{a} python3.9-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} time{a} xml-core{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl ed libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl libpaper-utils lynx python3-pil python3-pygments wget 0 packages upgraded, 55 newly installed, 0 to remove and 0 not upgraded. Need to get 26.7 MB of archives. After unpacking 97.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main i386 bsdextrautils i386 2.36.1-7 [148 kB] Get: 2 http://deb.debian.org/debian bullseye/main i386 libuchardet0 i386 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main i386 groff-base i386 1.22.4-6 [952 kB] Get: 4 http://deb.debian.org/debian bullseye/main i386 libpipeline1 i386 1.5.3-1 [36.8 kB] Get: 5 http://deb.debian.org/debian bullseye/main i386 man-db i386 2.9.4-2 [1367 kB] Get: 6 http://deb.debian.org/debian bullseye/main i386 readline-common all 8.1-1 [73.7 kB] Get: 7 http://deb.debian.org/debian bullseye/main i386 libreadline8 i386 8.1-1 [173 kB] Get: 8 http://deb.debian.org/debian bullseye/main i386 libsigsegv2 i386 2.13-1 [35.1 kB] Get: 9 http://deb.debian.org/debian bullseye/main i386 gawk i386 1:5.1.0-1 [618 kB] Get: 10 http://deb.debian.org/debian bullseye/main i386 libpython3.9-minimal i386 3.9.2-1 [801 kB] Get: 11 http://deb.debian.org/debian bullseye/main i386 libexpat1 i386 2.2.10-2 [98.8 kB] Get: 12 http://deb.debian.org/debian bullseye/main i386 python3.9-minimal i386 3.9.2-1 [1956 kB] Get: 13 http://deb.debian.org/debian bullseye/main i386 python3-minimal i386 3.9.2-3 [38.2 kB] Get: 14 http://deb.debian.org/debian bullseye/main i386 media-types all 4.0.0 [30.3 kB] Get: 15 http://deb.debian.org/debian bullseye/main i386 libmpdec3 i386 2.5.1-1 [91.9 kB] Get: 16 http://deb.debian.org/debian bullseye/main i386 libpython3.9-stdlib i386 3.9.2-1 [1703 kB] Get: 17 http://deb.debian.org/debian bullseye/main i386 python3.9 i386 3.9.2-1 [466 kB] Get: 18 http://deb.debian.org/debian bullseye/main i386 libpython3-stdlib i386 3.9.2-3 [21.4 kB] Get: 19 http://deb.debian.org/debian bullseye/main i386 python3 i386 3.9.2-3 [37.9 kB] Get: 20 http://deb.debian.org/debian bullseye/main i386 sgml-base all 1.30 [15.1 kB] Get: 21 http://deb.debian.org/debian bullseye/main i386 sensible-utils all 0.0.14 [14.8 kB] Get: 22 http://deb.debian.org/debian bullseye/main i386 libmagic-mgc i386 1:5.39-3 [273 kB] Get: 23 http://deb.debian.org/debian bullseye/main i386 libmagic1 i386 1:5.39-3 [133 kB] Get: 24 http://deb.debian.org/debian bullseye/main i386 file i386 1:5.39-3 [69.0 kB] Get: 25 http://deb.debian.org/debian bullseye/main i386 gettext-base i386 0.21-4 [176 kB] Get: 26 http://deb.debian.org/debian bullseye/main i386 m4 i386 1.4.18-5 [206 kB] Get: 27 http://deb.debian.org/debian bullseye/main i386 autoconf all 2.69-14 [313 kB] Get: 28 http://deb.debian.org/debian bullseye/main i386 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 29 http://deb.debian.org/debian bullseye/main i386 automake all 1:1.16.3-2 [814 kB] Get: 30 http://deb.debian.org/debian bullseye/main i386 autopoint all 0.21-4 [510 kB] Get: 31 http://deb.debian.org/debian bullseye/main i386 libncurses6 i386 6.2+20201114-2 [110 kB] Get: 32 http://deb.debian.org/debian bullseye/main i386 bc i386 1.07.1-2+b2 [111 kB] Get: 33 http://deb.debian.org/debian bullseye/main i386 busybox i386 1:1.30.1-6+b2 [428 kB] Get: 34 http://deb.debian.org/debian bullseye/main i386 libdebhelper-perl all 13.3.4 [189 kB] Get: 35 http://deb.debian.org/debian bullseye/main i386 libtool all 2.4.6-15 [513 kB] Get: 36 http://deb.debian.org/debian bullseye/main i386 dh-autoreconf all 20 [17.1 kB] Get: 37 http://deb.debian.org/debian bullseye/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 38 http://deb.debian.org/debian bullseye/main i386 libsub-override-perl all 0.09-2 [10.2 kB] Get: 39 http://deb.debian.org/debian bullseye/main i386 libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 40 http://deb.debian.org/debian bullseye/main i386 dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 41 http://deb.debian.org/debian bullseye/main i386 libelf1 i386 0.183-1 [171 kB] Get: 42 http://deb.debian.org/debian bullseye/main i386 dwz i386 0.13+20210201-1 [179 kB] Get: 43 http://deb.debian.org/debian bullseye/main i386 libicu67 i386 67.1-6 [8776 kB] Get: 44 http://deb.debian.org/debian bullseye/main i386 libxml2 i386 2.9.10+dfsg-6.7 [728 kB] Get: 45 http://deb.debian.org/debian bullseye/main i386 gettext i386 0.21-4 [1322 kB] Get: 46 http://deb.debian.org/debian bullseye/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 47 http://deb.debian.org/debian bullseye/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 48 http://deb.debian.org/debian bullseye/main i386 debhelper all 13.3.4 [1049 kB] Get: 49 http://deb.debian.org/debian bullseye/main i386 xml-core all 0.18+nmu1 [23.8 kB] Get: 50 http://deb.debian.org/debian bullseye/main i386 docutils-common all 0.16+dfsg-4 [129 kB] Get: 51 http://deb.debian.org/debian bullseye/main i386 mksh i386 59c-8 [690 kB] Get: 52 http://deb.debian.org/debian bullseye/main i386 posh i386 0.14.1 [96.7 kB] Get: 53 http://deb.debian.org/debian bullseye/main i386 python3-roman all 2.0.0-5 [9064 B] Get: 54 http://deb.debian.org/debian bullseye/main i386 python3-docutils all 0.16+dfsg-4 [384 kB] Get: 55 http://deb.debian.org/debian bullseye/main i386 time i386 1.9-0.1 [50.9 kB] Fetched 26.7 MB in 6s (4429 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19675 files and directories currently installed.) Preparing to unpack .../0-bsdextrautils_2.36.1-7_i386.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../1-libuchardet0_0.0.7-1_i386.deb ... Unpacking libuchardet0:i386 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../2-groff-base_1.22.4-6_i386.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../3-libpipeline1_1.5.3-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../4-man-db_2.9.4-2_i386.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../5-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) ... Selecting previously unselected package libreadline8:i386. Preparing to unpack .../6-libreadline8_8.1-1_i386.deb ... Unpacking libreadline8:i386 (8.1-1) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../7-libsigsegv2_2.13-1_i386.deb ... Unpacking libsigsegv2:i386 (2.13-1) ... Setting up readline-common (8.1-1) ... Setting up libreadline8:i386 (8.1-1) ... Setting up libsigsegv2:i386 (2.13-1) ... Selecting previously unselected package gawk. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20281 files and directories currently installed.) Preparing to unpack .../gawk_1%3a5.1.0-1_i386.deb ... Unpacking gawk (1:5.1.0-1) ... Selecting previously unselected package libpython3.9-minimal:i386. Preparing to unpack .../libpython3.9-minimal_3.9.2-1_i386.deb ... Unpacking libpython3.9-minimal:i386 (3.9.2-1) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../libexpat1_2.2.10-2_i386.deb ... Unpacking libexpat1:i386 (2.2.10-2) ... Selecting previously unselected package python3.9-minimal. Preparing to unpack .../python3.9-minimal_3.9.2-1_i386.deb ... Unpacking python3.9-minimal (3.9.2-1) ... Setting up libpython3.9-minimal:i386 (3.9.2-1) ... Setting up libexpat1:i386 (2.2.10-2) ... Setting up python3.9-minimal (3.9.2-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20750 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.9.2-3_i386.deb ... Unpacking python3-minimal (3.9.2-3) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_4.0.0_all.deb ... Unpacking media-types (4.0.0) ... Selecting previously unselected package libmpdec3:i386. Preparing to unpack .../2-libmpdec3_2.5.1-1_i386.deb ... Unpacking libmpdec3:i386 (2.5.1-1) ... Selecting previously unselected package libpython3.9-stdlib:i386. Preparing to unpack .../3-libpython3.9-stdlib_3.9.2-1_i386.deb ... Unpacking libpython3.9-stdlib:i386 (3.9.2-1) ... Selecting previously unselected package python3.9. Preparing to unpack .../4-python3.9_3.9.2-1_i386.deb ... Unpacking python3.9 (3.9.2-1) ... Selecting previously unselected package libpython3-stdlib:i386. Preparing to unpack .../5-libpython3-stdlib_3.9.2-3_i386.deb ... Unpacking libpython3-stdlib:i386 (3.9.2-3) ... Setting up python3-minimal (3.9.2-3) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21147 files and directories currently installed.) Preparing to unpack .../00-python3_3.9.2-3_i386.deb ... Unpacking python3 (3.9.2-3) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.30_all.deb ... Unpacking sgml-base (1.30) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.39-3_i386.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../04-libmagic1_1%3a5.39-3_i386.deb ... Unpacking libmagic1:i386 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.39-3_i386.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.21-4_i386.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package m4. Preparing to unpack .../07-m4_1.4.18-5_i386.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../08-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../09-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../10-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../11-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../12-libncurses6_6.2+20201114-2_i386.deb ... Unpacking libncurses6:i386 (6.2+20201114-2) ... Selecting previously unselected package bc. Preparing to unpack .../13-bc_1.07.1-2+b2_i386.deb ... Unpacking bc (1.07.1-2+b2) ... Selecting previously unselected package busybox. Preparing to unpack .../14-busybox_1%3a1.30.1-6+b2_i386.deb ... Unpacking busybox (1:1.30.1-6+b2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../22-libelf1_0.183-1_i386.deb ... Unpacking libelf1:i386 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.13+20210201-1_i386.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:i386. Preparing to unpack .../24-libicu67_67.1-6_i386.deb ... Unpacking libicu67:i386 (67.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../25-libxml2_2.9.10+dfsg-6.7_i386.deb ... Unpacking libxml2:i386 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-4_i386.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package xml-core. Preparing to unpack .../30-xml-core_0.18+nmu1_all.deb ... Unpacking xml-core (0.18+nmu1) ... Selecting previously unselected package docutils-common. Preparing to unpack .../31-docutils-common_0.16+dfsg-4_all.deb ... Unpacking docutils-common (0.16+dfsg-4) ... Selecting previously unselected package mksh. Preparing to unpack .../32-mksh_59c-8_i386.deb ... Unpacking mksh (59c-8) ... Selecting previously unselected package posh. Preparing to unpack .../33-posh_0.14.1_i386.deb ... Unpacking posh (0.14.1) ... Selecting previously unselected package python3-roman. Preparing to unpack .../34-python3-roman_2.0.0-5_all.deb ... Unpacking python3-roman (2.0.0-5) ... Selecting previously unselected package python3-docutils. Preparing to unpack .../35-python3-docutils_0.16+dfsg-4_all.deb ... Unpacking python3-docutils (0.16+dfsg-4) ... Selecting previously unselected package time. Preparing to unpack .../36-time_1.9-0.1_i386.deb ... Unpacking time (1.9-0.1) ... Setting up media-types (4.0.0) ... Setting up libpipeline1:i386 (1.5.3-1) ... Setting up time (1.9-0.1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:i386 (67.1-6) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up gawk (1:5.1.0-1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up posh (0.14.1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:i386 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up m4 (1.4.18-5) ... Setting up file (1:5.39-3) ... Setting up busybox (1:1.30.1-6+b2) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up mksh (59c-8) ... update-alternatives: using /bin/mksh to provide /bin/ksh (ksh) in auto mode Setting up libncurses6:i386 (6.2+20201114-2) ... Setting up autopoint (0.21-4) ... Setting up autoconf (2.69-14) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:i386 (0.0.7-1) ... Setting up libmpdec3:i386 (2.5.1-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up sgml-base (1.30) ... Setting up libelf1:i386 (0.183-1) ... Setting up libxml2:i386 (2.9.10+dfsg-6.7) ... Setting up libpython3.9-stdlib:i386 (3.9.2-1) ... Setting up libpython3-stdlib:i386 (3.9.2-3) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up bc (1.07.1-2+b2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up xml-core (0.18+nmu1) ... Setting up python3.9 (3.9.2-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up python3 (3.9.2-3) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up python3-roman (2.0.0-5) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-12) ... Processing triggers for sgml-base (1.30) ... Setting up docutils-common (0.16+dfsg-4) ... Processing triggers for sgml-base (1.30) ... Setting up python3-docutils (0.16+dfsg-4) ... update-alternatives: using /usr/share/docutils/scripts/python3/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html4 to provide /usr/bin/rst2html4 (rst2html4) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html5 to provide /usr/bin/rst2html5 (rst2html5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/shellia-5.6.5/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package shellia dpkg-buildpackage: info: source version 5.6.5 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Bernd Schumacher dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean make[1]: Entering directory '/build/shellia-5.6.5' make[1]: Leaving directory '/build/shellia-5.6.5' debian/rules build dh build make[1]: Entering directory '/build/shellia-5.6.5' OK "./examples/test.hello_world" -s "bash" OK "./examples/test.hello_world" -s "dash" OK "./examples/test.hello_world" -s "busybox sh" OK "./examples/test.hello_world" -s "mksh" OK "./examples/test.hello_world" -s "posh" OK "./examples/test.hello_world_debug" -s "bash" OK "./examples/test.hello_world_debug" -s "dash" OK "./examples/test.hello_world_debug" -s "busybox sh" OK "./examples/test.hello_world_debug" -s "mksh" OK "./examples/test.hello_world_debug" -s "posh" OK "./examples/test.hello_world_error" -s "bash" OK "./examples/test.hello_world_error" -s "dash" OK "./examples/test.hello_world_error" -s "busybox sh" OK "./examples/test.hello_world_error" -s "mksh" OK "./examples/test.hello_world_error" -s "posh" OK "./examples/test.hello_world_fun" -s "bash" OK "./examples/test.hello_world_fun" -s "dash" OK "./examples/test.hello_world_fun" -s "busybox sh" OK "./examples/test.hello_world_fun" -s "mksh" OK "./examples/test.hello_world_fun" -s "posh" OK "./examples/test.hello_world_log" -s "bash" OK "./examples/test.hello_world_log" -s "dash" OK "./examples/test.hello_world_log" -s "busybox sh" OK "./examples/test.hello_world_log" -s "mksh" OK "./examples/test.hello_world_log" -s "posh" OK "./examples/test.hello_world_trace" -s "bash" OK "./examples/test.hello_world_trace" -s "dash" OK "./examples/test.hello_world_trace" -s "busybox sh" OK "./examples/test.hello_world_trace" -s "mksh" OK "./examples/test.hello_world_trace" -s "posh" OK "./tests/test.backslash" -s "bash" OK "./tests/test.backslash" -s "dash" OK "./tests/test.backslash" -s "busybox sh" OK "./tests/test.backslash" -s "mksh" OK "./tests/test.backslash" -s "posh" OK "./tests/test.backslash2" -s "bash" OK "./tests/test.backslash2" -s "dash" OK "./tests/test.backslash2" -s "busybox sh" OK "./tests/test.backslash2" -s "mksh" OK "./tests/test.backslash2" -s "posh" OK "./tests/test.block" -s "bash" OK "./tests/test.block" -s "dash" OK "./tests/test.block" -s "busybox sh" OK "./tests/test.block" -s "mksh" OK "./tests/test.block" -s "posh" OK "./tests/test.buffer" -s "bash" OK "./tests/test.buffer" -s "dash" OK "./tests/test.buffer" -s "busybox sh" OK "./tests/test.buffer" -s "mksh" OK "./tests/test.buffer" -s "posh" OK "./tests/test.col_regex" -s "bash" OK "./tests/test.col_regex" -s "dash" OK "./tests/test.col_regex" -s "busybox sh" OK "./tests/test.col_regex" -s "mksh" OK "./tests/test.col_regex" -s "posh" OK "./tests/test.debug" -s "bash" OK "./tests/test.debug" -s "dash" OK "./tests/test.debug" -s "busybox sh" OK "./tests/test.debug" -s "mksh" OK "./tests/test.debug" -s "posh" OK "./tests/test.debug_badlevel" -s "bash" OK "./tests/test.debug_badlevel" -s "dash" OK "./tests/test.debug_badlevel" -s "busybox sh" OK "./tests/test.debug_badlevel" -s "mksh" OK "./tests/test.debug_badlevel" -s "posh" OK "./tests/test.debug_env" -s "bash" OK "./tests/test.debug_env" -s "dash" OK "./tests/test.debug_env" -s "busybox sh" OK "./tests/test.debug_env" -s "mksh" OK "./tests/test.debug_env" -s "posh" OK "./tests/test.debug_iptables" -s "bash" OK "./tests/test.debug_iptables" -s "dash" OK "./tests/test.debug_iptables" -s "busybox sh" OK "./tests/test.debug_iptables" -s "mksh" OK "./tests/test.debug_iptables" -s "posh" OK "./tests/test.eval" -s "bash" OK "./tests/test.eval" -s "dash" OK "./tests/test.eval" -s "busybox sh" OK "./tests/test.eval" -s "mksh" OK "./tests/test.eval" -s "posh" OK "./tests/test.exit" -s "bash" OK "./tests/test.exit" -s "dash" OK "./tests/test.exit" -s "busybox sh" OK "./tests/test.exit" -s "mksh" OK "./tests/test.exit" -s "posh" OK "./tests/test.func" -s "bash" OK "./tests/test.func" -s "dash" OK "./tests/test.func" -s "busybox sh" OK "./tests/test.func" -s "mksh" OK "./tests/test.func" -s "posh" OK "./tests/test.ia-C-error" -s "bash" OK "./tests/test.ia-C-error" -s "dash" OK "./tests/test.ia-C-error" -s "busybox sh" OK "./tests/test.ia-C-error" -s "mksh" OK "./tests/test.ia-C-error" -s "posh" OK "./tests/test.ia-C-expr" -s "bash" OK "./tests/test.ia-C-expr" -s "dash" OK "./tests/test.ia-C-expr" -s "busybox sh" OK "./tests/test.ia-C-expr" -s "mksh" OK "./tests/test.ia-C-expr" -s "posh" OK "./tests/test.ia-c--learn" -s "bash" OK "./tests/test.ia-c--learn" -s "dash" OK "./tests/test.ia-c--learn" -s "busybox sh" OK "./tests/test.ia-c--learn" -s "mksh" OK "./tests/test.ia-c--learn" -s "posh" OK "./tests/test.ia-c-C" -s "bash" OK "./tests/test.ia-c-C" -s "dash" OK "./tests/test.ia-c-C" -s "busybox sh" OK "./tests/test.ia-c-C" -s "mksh" OK "./tests/test.ia-c-C" -s "posh" OK "./tests/test.ia-c-error" -s "bash" OK "./tests/test.ia-c-error" -s "dash" OK "./tests/test.ia-c-error" -s "busybox sh" OK "./tests/test.ia-c-error" -s "mksh" OK "./tests/test.ia-c-error" -s "posh" OK "./tests/test.ia-c-expr" -s "bash" OK "./tests/test.ia-c-expr" -s "dash" OK "./tests/test.ia-c-expr" -s "busybox sh" OK "./tests/test.ia-c-expr" -s "mksh" OK "./tests/test.ia-c-expr" -s "posh" OK "./tests/test.ia-c-nocheck" -s "bash" OK "./tests/test.ia-c-nocheck" -s "dash" OK "./tests/test.ia-c-nocheck" -s "busybox sh" OK "./tests/test.ia-c-nocheck" -s "mksh" OK "./tests/test.ia-c-nocheck" -s "posh" OK "./tests/test.ia-c-s-m" -s "bash" OK "./tests/test.ia-c-s-m" -s "dash" OK "./tests/test.ia-c-s-m" -s "busybox sh" OK "./tests/test.ia-c-s-m" -s "mksh" OK "./tests/test.ia-c-s-m" -s "posh" OK "./tests/test.ia-empty" -s "bash" OK "./tests/test.ia-empty" -s "dash" OK "./tests/test.ia-empty" -s "busybox sh" OK "./tests/test.ia-empty" -s "mksh" OK "./tests/test.ia-empty" -s "posh" OK "./tests/test.ia-expr" -s "bash" OK "./tests/test.ia-expr" -s "dash" OK "./tests/test.ia-expr" -s "busybox sh" OK "./tests/test.ia-expr" -s "mksh" OK "./tests/test.ia-expr" -s "posh" OK "./tests/test.ia-s" -s "bash" OK "./tests/test.ia-s" -s "dash" OK "./tests/test.ia-s" -s "busybox sh" OK "./tests/test.ia-s" -s "mksh" OK "./tests/test.ia-s" -s "posh" OK "./tests/test.ia_ask" -s "bash" OK "./tests/test.ia_ask" -s "dash" OK "./tests/test.ia_ask" -s "busybox sh" OK "./tests/test.ia_ask" -s "mksh" OK "./tests/test.ia_ask" -s "posh" OK "./tests/test.ia_mktemp" -s "mksh" OK "./tests/test.ia_mktemp" -s "bash" OK "./tests/test.ia_mktemp" -s "dash" OK "./tests/test.ia_mktemp" -s "busybox sh" OK "./tests/test.ia_mktemp2" -s "mksh" OK "./tests/test.ia_mktemp2" -s "bash" OK "./tests/test.ia_mktemp2" -s "dash" OK "./tests/test.ia_mktemp2" -s "busybox sh" OK "./tests/test.multiply" -s "bash" OK "./tests/test.multiply" -s "dash" OK "./tests/test.multiply" -s "busybox sh" OK "./tests/test.multiply" -s "mksh" OK "./tests/test.multiply" -s "posh" OK "./tests/test.only_debug" -s "bash" OK "./tests/test.only_debug" -s "dash" OK "./tests/test.only_debug" -s "busybox sh" OK "./tests/test.only_debug" -s "mksh" OK "./tests/test.only_debug" -s "posh" OK "./tests/test.only_interactive" -s "bash" OK "./tests/test.only_interactive" -s "dash" OK "./tests/test.only_interactive" -s "busybox sh" OK "./tests/test.only_interactive" -s "mksh" OK "./tests/test.only_interactive" -s "posh" OK "./tests/test.only_log" -s "bash" OK "./tests/test.only_log" -s "dash" OK "./tests/test.only_log" -s "busybox sh" OK "./tests/test.only_log" -s "mksh" OK "./tests/test.only_log" -s "posh" OK "./tests/test.prefix" -s "bash" OK "./tests/test.prefix_change" -s "bash" OK "./tests/test.prefix_change" -s "dash" OK "./tests/test.prefix_change" -s "busybox sh" OK "./tests/test.prefix_change" -s "mksh" OK "./tests/test.prefix_change" -s "posh" OK "./tests/test.redo" -s "bash" OK "./tests/test.redo" -s "dash" OK "./tests/test.redo" -s "busybox sh" OK "./tests/test.redo" -s "mksh" OK "./tests/test.redo" -s "posh" OK "./tests/test.rename_logfile" -s "bash" OK "./tests/test.rename_logfile" -s "dash" OK "./tests/test.rename_logfile" -s "busybox sh" OK "./tests/test.rename_logfile" -s "mksh" OK "./tests/test.rename_logfile" -s "posh" OK "./tests/test.return" -s "bash" OK "./tests/test.return" -s "dash" OK "./tests/test.return" -s "busybox sh" OK "./tests/test.return" -s "mksh" OK "./tests/test.return" -s "posh" OK "./tests/test.return2" -s "bash" OK "./tests/test.return2" -s "dash" OK "./tests/test.return2" -s "busybox sh" OK "./tests/test.return2" -s "mksh" OK "./tests/test.return2" -s "posh" OK "./tests/test.return3" -s "bash" OK "./tests/test.return3" -s "dash" OK "./tests/test.return3" -s "busybox sh" OK "./tests/test.return3" -s "mksh" OK "./tests/test.return3" -s "posh" OK "./tests/test.v" -s "bash" OK "./tests/test.v" -s "dash" OK "./tests/test.v" -s "busybox sh" OK "./tests/test.v" -s "mksh" OK "./tests/test.v" -s "posh" OK "./tests/test.wrong-missing-ia_init" -s "bash" OK "./tests/test.wrong-missing-ia_init" -s "dash" OK "./tests/test.wrong-missing-ia_init" -s "busybox sh" OK "./tests/test.wrong-missing-ia_init" -s "mksh" OK "./tests/test.wrong-missing-ia_init" -s "posh" 0 Errors make[1]: Leaving directory '/build/shellia-5.6.5' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary make[1]: Entering directory '/build/shellia-5.6.5' make[1]: Leaving directory '/build/shellia-5.6.5' make[1]: Entering directory '/build/shellia-5.6.5' dh_compress -X examples/mylib make[1]: Leaving directory '/build/shellia-5.6.5' dpkg-deb: building package 'shellia' in '../shellia_5.6.5_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../shellia_5.6.5_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/23748 and its subdirectories I: Current time: Wed Jun 9 10:13:59 -12 2021 I: pbuilder-time-stamp: 1623276839 Wed Jun 9 22:14:00 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ionos16-i386.debian.net. Wed Jun 9 22:14:00 UTC 2021 I: Preparing to do remote build '2' on ionos16-i386.debian.net. Wed Jun 9 22:18:21 UTC 2021 I: Deleting $TMPDIR on ionos16-i386.debian.net. Wed Jun 9 22:18:22 UTC 2021 I: shellia_5.6.5_i386.changes: Format: 1.8 Date: Wed, 04 Nov 2020 19:50:01 +0100 Source: shellia Binary: shellia Architecture: all Version: 5.6.5 Distribution: unstable Urgency: medium Maintainer: Bernd Schumacher Changed-By: Bernd Schumacher Description: shellia - shell interactive library Changes: shellia (5.6.5) unstable; urgency=medium . * always use gawk instead of awk to make testing more reliable Checksums-Sha1: 5d31adaa03ad59012adda7e36f0ce0dac43328ec 32548 shellia_5.6.5_all.deb 2f2487f5972eae3e7cc4611618f369b9fd4d6fd5 5276 shellia_5.6.5_i386.buildinfo Checksums-Sha256: a25557bdc0ddd436f0014721616d7057493480242e97038051b6341013eb93d5 32548 shellia_5.6.5_all.deb 71e8eac25490c82165f0602b7fc4a8d3c4e01bf1e4fc379a79aa05e2b6188688 5276 shellia_5.6.5_i386.buildinfo Files: 7ffda369afc62ff9c8527dd073392210 32548 libs optional shellia_5.6.5_all.deb 01a9032bf3e9956072a0d8e42aae0946 5276 libs optional shellia_5.6.5_i386.buildinfo Wed Jun 9 22:18:23 UTC 2021 I: diffoscope 172 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.00gy0f2aiO/shellia_5.6.5.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.00gy0f2aiO/shellia_5.6.5.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.00gy0f2aiO/shellia_5.6.5.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.00gy0f2aiO/b1/shellia_5.6.5_i386.changes /srv/reproducible-results/rbuild-debian/tmp.00gy0f2aiO/b2/shellia_5.6.5_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 1.349s) 1.349s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.054s) 0.054s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Wed Jun 9 22:18:27 UTC 2021 I: diffoscope 172 found no differences in the changes files, and a .buildinfo file also exists. Wed Jun 9 22:18:27 UTC 2021 I: shellia from bullseye built successfully and reproducibly on i386. Wed Jun 9 22:18:29 UTC 2021 I: Submitting .buildinfo files to external archives: Wed Jun 9 22:18:29 UTC 2021 I: Submitting 8.0K b1/shellia_5.6.5_i386.buildinfo.asc Wed Jun 9 22:18:29 UTC 2021 I: Submitting 8.0K b2/shellia_5.6.5_i386.buildinfo.asc Wed Jun 9 22:18:30 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Jun 9 22:18:30 UTC 2021 I: Done submitting .buildinfo files. Wed Jun 9 22:18:30 UTC 2021 I: Removing signed shellia_5.6.5_i386.buildinfo.asc files: removed './b1/shellia_5.6.5_i386.buildinfo.asc' removed './b2/shellia_5.6.5_i386.buildinfo.asc'