Sun Jun 27 05:56:47 UTC 2021 I: starting to build libscalar-list-utils-perl/bullseye/i386 on jenkins on '2021-06-27 05:56' Sun Jun 27 05:56:47 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_7/9586/console.log Sun Jun 27 05:56:47 UTC 2021 I: Downloading source for bullseye/libscalar-list-utils-perl=1:1.55-1 --2021-06-27 05:56:48-- http://cdn-fastly.deb.debian.org/debian/pool/main/libs/libscalar-list-utils-perl/libscalar-list-utils-perl_1.55-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2458 (2.4K) Saving to: ‘libscalar-list-utils-perl_1.55-1.dsc’ 0K .. 100% 165M=0s 2021-06-27 05:56:48 (165 MB/s) - ‘libscalar-list-utils-perl_1.55-1.dsc’ saved [2458/2458] Sun Jun 27 05:56:48 UTC 2021 I: libscalar-list-utils-perl_1.55-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libscalar-list-utils-perl Binary: libscalar-list-utils-perl Architecture: any Version: 1:1.55-1 Maintainer: Debian Perl Group Uploaders: Salvatore Bonaccorso Homepage: https://metacpan.org/release/Scalar-List-Utils Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libscalar-list-utils-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libscalar-list-utils-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 12), perl-xs-dev, perl:native Package-List: libscalar-list-utils-perl deb perl optional arch=any Checksums-Sha1: 9132741bf31bf7b3fd7658021275f2d49b9fdf89 105142 libscalar-list-utils-perl_1.55.orig.tar.gz 0f950eae5efe712ea43db268e0c55b34e7ec7258 3904 libscalar-list-utils-perl_1.55-1.debian.tar.xz Checksums-Sha256: 4d2bdc1c72a7bc4d69d6a5cc85bc7566497c3b183c6175b832784329d58feb4b 105142 libscalar-list-utils-perl_1.55.orig.tar.gz efcada64595d37629860200da640b99cdf736b2b2984162323728fea05db9633 3904 libscalar-list-utils-perl_1.55-1.debian.tar.xz Files: 7988f5111e33ba47e175cf3e86b0d93f 105142 libscalar-list-utils-perl_1.55.orig.tar.gz cb190c9bc8fb31a473c44dd91566b5a2 3904 libscalar-list-utils-perl_1.55-1.debian.tar.xz Dgit: 6c3aa2eefb728f5facb0d121fc8f5c6d28d72b01 debian archive/debian/1%1.55-1 https://git.dgit.debian.org/libscalar-list-utils-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAl6TIYlfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgZ16g//XSOzcKRM0IzMJOUQX+/fCUnIrP1Xv8FfbnkFt8lY+BU6n5Wi1lDDcIpx uOTW0Ms2x2wqS+jsmembnfGrA8b40FAgMvn0GrtjyuQ4ArZ/XIECPEHm2mVoHecB B8739ydhj19ul3/mZ+LzhiN66TnUwdKgogXgCNgw9/5cNPBqfyGYYeEA8z2Kycqy 8BjePJUDlHX7v7OlBE5E9khBGxyRbjZ3Noq/HDPbLMfg3pWIxnj/3EfsgIMmyVES Y/zGLJv42VuMmE0wyvUWsM8MvNd2T+g07B61Nsg4+lH7NgkFEJGwYaFuvAIFL88Q 5e4fkFY7qkE6y+RN7bTt8hJ6B9dB7MFZYdfmv30gLMnXlEhOGyRtfPemNJo25V2W Vk4uwwzNVpFQh6ykQUf2GVqZpQnBcLpzD8WOzDhH6JTdBuKsiPoJkW20byxL0dTU IYRTn06cpMDjEctOOqqbDzWNcI9I3KxTzF19Q+HDmgmlI94rd8oy3blMOCCz8YFx JmAsXjUgspyU9GQpo3oApmZnXAe9eaYbDS201ogF8uzWi5VNhODG3jsmX21+aXbU mYxhWt0ZgZmbIAjuq8AijQwNgmGmusUjtiFCoYgFAlCXHhJNupWHwkg4NA47Gxy8 ZfyQLhoB8RP4+5onx47VaIOmQyX6wUABeljMu8Db+TmC0j8Dmhk= =suNz -----END PGP SIGNATURE----- Sun Jun 27 05:56:48 UTC 2021 I: Checking whether the package is not for us Sun Jun 27 05:56:48 UTC 2021 I: Starting 1st build on remote node ionos12-i386.debian.net. Sun Jun 27 05:56:48 UTC 2021 I: Preparing to do remote build '1' on ionos12-i386.debian.net. Sun Jun 27 06:01:44 UTC 2021 I: Deleting $TMPDIR on ionos12-i386.debian.net. W: cgroups are not available on the host, not using them. unshare: unshare failed: Cannot allocate memory W: pbuilder: unshare CLONE_NEWNET not available I: pbuilder: network access is available during build! I: Current time: Sat Jun 26 17:56:53 -12 2021 I: pbuilder-time-stamp: 1624773413 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libscalar-list-utils-perl_1.55-1.dsc] I: copying [./libscalar-list-utils-perl_1.55.orig.tar.gz] I: copying [./libscalar-list-utils-perl_1.55-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.KRtEq2cD/trustedkeys.kbx': General error gpgv: Signature made Sun Apr 12 02:11:21 2020 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libscalar-list-utils-perl_1.55-1.dsc dpkg-source: info: extracting libscalar-list-utils-perl in libscalar-list-utils-perl-1.55 dpkg-source: info: unpacking libscalar-list-utils-perl_1.55.orig.tar.gz dpkg-source: info: unpacking libscalar-list-utils-perl_1.55-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/8161/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=10' DISTRIBUTION='' HOME='/root' HOST_ARCH='i386' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='8161' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.wv07EKxZ5a/pbuilderrc_M4DJ --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.wv07EKxZ5a/b1 --logfile b1/build.log libscalar-list-utils-perl_1.55-1.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/sbin/chroot' http_proxy='http://78.137.99.97:3128' I: uname -a Linux ionos12-i386 4.19.0-17-686-pae #1 SMP Debian 4.19.194-1 (2021-06-10) i686 GNU/Linux I: ls -l /bin total 5776 -rwxr-xr-x 1 root root 1367848 Jun 21 14:25 bash -rwxr-xr-x 3 root root 38280 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 17768 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 38824 Sep 22 2020 cat -rwxr-xr-x 1 root root 71624 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 67528 Sep 22 2020 chmod -rwxr-xr-x 1 root root 75752 Sep 22 2020 chown -rwxr-xr-x 1 root root 157960 Sep 22 2020 cp -rwxr-xr-x 1 root root 128724 Dec 10 2020 dash -rwxr-xr-x 1 root root 124904 Sep 22 2020 date -rwxr-xr-x 1 root root 92172 Sep 22 2020 dd -rwxr-xr-x 1 root root 100752 Sep 22 2020 df -rwxr-xr-x 1 root root 153964 Sep 22 2020 dir -rwxr-xr-x 1 root root 83644 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 34664 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 34664 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 71928 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 30112 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 210488 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 100952 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 21916 Nov 6 2019 hostname -rwxr-xr-x 1 root root 83980 Sep 22 2020 ln -rwxr-xr-x 1 root root 55572 Feb 7 2020 login -rwxr-xr-x 1 root root 153964 Sep 22 2020 ls -rwxr-xr-x 1 root root 153124 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 96328 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 79912 Sep 22 2020 mknod -rwxr-xr-x 1 root root 47048 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 58920 Feb 7 02:38 more -rwsr-xr-x 1 root root 50720 Feb 7 02:38 mount -rwxr-xr-x 1 root root 13856 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 157996 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 38824 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 14:25 rbash -> bash -rwxr-xr-x 1 root root 46984 Sep 22 2020 readlink -rwxr-xr-x 1 root root 75720 Sep 22 2020 rm -rwxr-xr-x 1 root root 46984 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 22292 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 125036 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jun 25 21:27 sh -> dash -rwxr-xr-x 1 root root 34696 Sep 22 2020 sleep -rwxr-xr-x 1 root root 83880 Sep 22 2020 stty -rwsr-xr-x 1 root root 79396 Feb 7 02:38 su -rwxr-xr-x 1 root root 34696 Sep 22 2020 sync -rwxr-xr-x 1 root root 602584 Feb 16 21:55 tar -rwxr-xr-x 1 root root 13860 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 108520 Sep 22 2020 touch -rwxr-xr-x 1 root root 34664 Sep 22 2020 true -rwxr-xr-x 1 root root 17768 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 30236 Feb 7 02:38 umount -rwxr-xr-x 1 root root 34664 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 153964 Sep 22 2020 vdir -rwxr-xr-x 1 root root 63024 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/8161/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19675 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libperl-dev{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 19.7 MB of archives. After unpacking 72.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main i386 bsdextrautils i386 2.36.1-7 [148 kB] Get: 2 http://deb.debian.org/debian bullseye/main i386 libuchardet0 i386 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main i386 groff-base i386 1.22.4-6 [952 kB] Get: 4 http://deb.debian.org/debian bullseye/main i386 libpipeline1 i386 1.5.3-1 [36.8 kB] Get: 5 http://deb.debian.org/debian bullseye/main i386 man-db i386 2.9.4-2 [1367 kB] Get: 6 http://deb.debian.org/debian bullseye/main i386 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main i386 libmagic-mgc i386 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main i386 libmagic1 i386 1:5.39-3 [133 kB] Get: 9 http://deb.debian.org/debian bullseye/main i386 file i386 1:5.39-3 [69.0 kB] Get: 10 http://deb.debian.org/debian bullseye/main i386 gettext-base i386 0.21-4 [176 kB] Get: 11 http://deb.debian.org/debian bullseye/main i386 libsigsegv2 i386 2.13-1 [35.1 kB] Get: 12 http://deb.debian.org/debian bullseye/main i386 m4 i386 1.4.18-5 [206 kB] Get: 13 http://deb.debian.org/debian bullseye/main i386 autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main i386 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main i386 automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main i386 autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main i386 libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main i386 libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main i386 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main i386 libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main i386 libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 23 http://deb.debian.org/debian bullseye/main i386 dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 24 http://deb.debian.org/debian bullseye/main i386 libelf1 i386 0.183-1 [171 kB] Get: 25 http://deb.debian.org/debian bullseye/main i386 dwz i386 0.13+20210201-1 [179 kB] Get: 26 http://deb.debian.org/debian bullseye/main i386 libicu67 i386 67.1-6 [8776 kB] Get: 27 http://deb.debian.org/debian bullseye/main i386 libxml2 i386 2.9.10+dfsg-6.7 [728 kB] Get: 28 http://deb.debian.org/debian bullseye/main i386 gettext i386 0.21-4 [1322 kB] Get: 29 http://deb.debian.org/debian bullseye/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main i386 debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main i386 libperl-dev i386 5.32.1-4 [1171 kB] Fetched 19.7 MB in 2s (12.8 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19675 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-7_i386.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../01-libuchardet0_0.0.7-1_i386.deb ... Unpacking libuchardet0:i386 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_i386.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../03-libpipeline1_1.5.3-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_i386.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_i386.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../07-libmagic1_1%3a5.39-3_i386.deb ... Unpacking libmagic1:i386 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_i386.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_i386.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../10-libsigsegv2_2.13-1_i386.deb ... Unpacking libsigsegv2:i386 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_i386.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../23-libelf1_0.183-1_i386.deb ... Unpacking libelf1:i386 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_i386.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:i386. Preparing to unpack .../25-libicu67_67.1-6_i386.deb ... Unpacking libicu67:i386 (67.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_i386.deb ... Unpacking libxml2:i386 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_i386.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libperl-dev:i386. Preparing to unpack .../31-libperl-dev_5.32.1-4_i386.deb ... Unpacking libperl-dev:i386 (5.32.1-4) ... Setting up libpipeline1:i386 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:i386 (67.1-6) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:i386 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up libperl-dev:i386 (5.32.1-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:i386 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:i386 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libelf1:i386 (0.183-1) ... Setting up libxml2:i386 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libscalar-list-utils-perl-1.55/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libscalar-list-utils-perl dpkg-buildpackage: info: source version 1:1.55-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/libscalar-list-utils-perl-1.55=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libscalar-list-utils-perl-1.55=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for List::Util Writing MYMETA.yml and MYMETA.json dh_auto_build make -j10 make[1]: Entering directory '/build/libscalar-list-utils-perl-1.55' Running Mkbootstrap for Util () cp lib/List/Util.pm blib/lib/List/Util.pm cp lib/Scalar/Util.pm blib/lib/Scalar/Util.pm cp lib/List/Util/XS.pm blib/lib/List/Util/XS.pm cp lib/Sub/Util.pm blib/lib/Sub/Util.pm chmod 644 "Util.bs" "/usr/bin/perl" "/usr/share/perl/5.32/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.32/ExtUtils/typemap' ListUtil.xs > ListUtil.xsc "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Util.bs blib/arch/auto/List/Util/Util.bs 644 mv ListUtil.xsc ListUtil.c i686-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build/libscalar-list-utils-perl-1.55=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.55\" -DXS_VERSION=\"1.55\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.32/CORE" -DPERL_EXT -DUSE_PPPORT_H ListUtil.c rm -f blib/arch/auto/List/Util/Util.so i686-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libscalar-list-utils-perl-1.55=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong ListUtil.o -o blib/arch/auto/List/Util/Util.so \ \ chmod 755 blib/arch/auto/List/Util/Util.so Manifying 4 pod documents make[1]: Leaving directory '/build/libscalar-list-utils-perl-1.55' dh_auto_test make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libscalar-list-utils-perl-1.55' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Util.bs blib/arch/auto/List/Util/Util.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00version.t ......... 1..4 ok 1 - VERSION mismatch between Scalar/List ok 2 - VERSION mismatch between LU::XS and LU ok 3 - VERSION mistmatch between Sub/Scalar ok 4 - VERSION mistmatch between Sub/List ok t/any-all.t ........... 1..12 ok 1 - any true ok 2 - any false ok 3 - any empty list ok 4 - all true ok 5 - all false ok 6 - all empty list ok 7 - notall true ok 8 - notall false ok 9 - notall empty list ok 10 - none true ok 11 - none false ok 12 - none empty list ok t/blessed.t ........... 1..12 ok 1 - undef is not blessed ok 2 - Numbers are not blessed ok 3 - Strings are not blessed ok 4 - Unblessed HASH-ref ok 5 - Unblessed ARRAY-ref ok 6 - Unblessed SCALAR-ref ok 7 - blessed ARRAY-ref ok 8 - blessed HASH-ref ok 9 - blessed HASH-ref ok 10 - recursion of UNIVERSAL::can ok 11 - blessed on broken isa() and can() ok 12 - blessed preserves utf8ness for utf8 class names ok t/dualvar.t ........... 1..41 ok 1 - Is a dualvar ok 2 - Numeric value ok 3 - String value ok 4 - Is a dualvar ok 5 - copy Numeric value ok 6 - copy String value ok 7 - No longer dualvar ok 8 - inc Numeric value ok 9 - inc String value ok 10 - Is a dualvar ok 11 - NV ok 12 - Is a dualvar ok 13 - UV 1 ok 14 - UV 2 ok 15 - Not a dualvar ok 16 - Is a dualvar ok 17 - Is a dualvar ok 18 - Tied num ok 19 - Tied str ok 20 - utf8 ok 21 - not utf8 ok 22 - Shared IV number preserved ok 23 - Shared string preserved ok 24 - Is a dualvar ok 25 - Shared NV number preserved ok 26 - Shared string preserved ok 27 - Is a dualvar ok 28 - Shared UV number preserved ok 29 - Shared UV number preserved ok 30 - Shared string preserved ok 31 - Is a dualvar ok 32 - Shared IV number preserved ok 33 - Shared string preserved ok 34 - Is a dualvar ok 35 - Shared NV number preserved ok 36 - Shared string preserved ok 37 - Is a dualvar ok 38 - Shared UV number preserved ok 39 - Shared UV number preserved ok 40 - Shared string preserved ok 41 - Is a dualvar ok t/exotic_names.t ...... 1..1560 ok 1 - stash name for renamed closure is correct when it contains \x00 ( \0 ) ok 2 - caller() in renamed closure returns correct name when it contains \x00 ( \0 ) ok 3 - %DB::sub entry for renamed closure is correct when it contains \x00 ( \0 ) ok 4 - stash name for natively compiled sub is correct when it contains \x00 ( \0 ) ok 5 - caller() in natively compiled sub returns correct name when it contains \x00 ( \0 ) ok 6 - %DB::sub entry for natively compiled sub is correct when it contains \x00 ( \0 ) ok 7 - stash name for renamed closure is correct when it contains \x01 ( \1 ) ok 8 - caller() in renamed closure returns correct name when it contains \x01 ( \1 ) ok 9 - %DB::sub entry for renamed closure is correct when it contains \x01 ( \1 ) ok 10 - stash name for natively compiled sub is correct when it contains \x01 ( \1 ) ok 11 - caller() in natively compiled sub returns correct name when it contains \x01 ( \1 ) ok 12 - %DB::sub entry for natively compiled sub is correct when it contains \x01 ( \1 ) ok 13 - stash name for renamed closure is correct when it contains \x02 ( \2 ) ok 14 - caller() in renamed closure returns correct name when it contains \x02 ( \2 ) ok 15 - %DB::sub entry for renamed closure is correct when it contains \x02 ( \2 ) ok 16 - stash name for natively compiled sub is correct when it contains \x02 ( \2 ) ok 17 - caller() in natively compiled sub returns correct name when it contains \x02 ( \2 ) ok 18 - %DB::sub entry for natively compiled sub is correct when it contains \x02 ( \2 ) ok 19 - stash name for renamed closure is correct when it contains \x03 ( \3 ) ok 20 - caller() in renamed closure returns correct name when it contains \x03 ( \3 ) ok 21 - %DB::sub entry for renamed closure is correct when it contains \x03 ( \3 ) ok 22 - stash name for natively compiled sub is correct when it contains \x03 ( \3 ) ok 23 - caller() in natively compiled sub returns correct name when it contains \x03 ( \3 ) ok 24 - %DB::sub entry for natively compiled sub is correct when it contains \x03 ( \3 ) ok 25 - stash name for renamed closure is correct when it contains \x04 ( \4 ) ok 26 - caller() in renamed closure returns correct name when it contains \x04 ( \4 ) ok 27 - %DB::sub entry for renamed closure is correct when it contains \x04 ( \4 ) ok 28 - stash name for natively compiled sub is correct when it contains \x04 ( \4 ) ok 29 - caller() in natively compiled sub returns correct name when it contains \x04 ( \4 ) ok 30 - %DB::sub entry for natively compiled sub is correct when it contains \x04 ( \4 ) ok 31 - stash name for renamed closure is correct when it contains \x05 ( \5 ) ok 32 - caller() in renamed closure returns correct name when it contains \x05 ( \5 ) ok 33 - %DB::sub entry for renamed closure is correct when it contains \x05 ( \5 ) ok 34 - stash name for natively compiled sub is correct when it contains \x05 ( \5 ) ok 35 - caller() in natively compiled sub returns correct name when it contains \x05 ( \5 ) ok 36 - %DB::sub entry for natively compiled sub is correct when it contains \x05 ( \5 ) ok 37 - stash name for renamed closure is correct when it contains \x06 ( \6 ) ok 38 - caller() in renamed closure returns correct name when it contains \x06 ( \6 ) ok 39 - %DB::sub entry for renamed closure is correct when it contains \x06 ( \6 ) ok 40 - stash name for natively compiled sub is correct when it contains \x06 ( \6 ) ok 41 - caller() in natively compiled sub returns correct name when it contains \x06 ( \6 ) ok 42 - %DB::sub entry for natively compiled sub is correct when it contains \x06 ( \6 ) ok 43 - stash name for renamed closure is correct when it contains \x07 ( \7 ) ok 44 - caller() in renamed closure returns correct name when it contains \x07 ( \7 ) ok 45 - %DB::sub entry for renamed closure is correct when it contains \x07 ( \7 ) ok 46 - stash name for natively compiled sub is correct when it contains \x07 ( \7 ) ok 47 - caller() in natively compiled sub returns correct name when it contains \x07 ( \7 ) ok 48 - %DB::sub entry for natively compiled sub is correct when it contains \x07 ( \7 ) ok 49 - stash name for renamed closure is correct when it contains \x08 ( \10 ) ok 50 - caller() in renamed closure returns correct name when it contains \x08 ( \10 ) ok 51 - %DB::sub entry for renamed closure is correct when it contains \x08 ( \10 ) ok 52 - stash name for natively compiled sub is correct when it contains \x08 ( \10 ) ok 53 - caller() in natively compiled sub returns correct name when it contains \x08 ( \10 ) ok 54 - %DB::sub entry for natively compiled sub is correct when it contains \x08 ( \10 ) ok 55 - stash name for renamed closure is correct when it contains \x09 ( \11 ) ok 56 - caller() in renamed closure returns correct name when it contains \x09 ( \11 ) ok 57 - %DB::sub entry for renamed closure is correct when it contains \x09 ( \11 ) ok 58 - stash name for natively compiled sub is correct when it contains \x09 ( \11 ) ok 59 - caller() in natively compiled sub returns correct name when it contains \x09 ( \11 ) ok 60 - %DB::sub entry for natively compiled sub is correct when it contains \x09 ( \11 ) ok 61 - stash name for renamed closure is correct when it contains \x0A ( \12 ) ok 62 - caller() in renamed closure returns correct name when it contains \x0A ( \12 ) ok 63 - %DB::sub entry for renamed closure is correct when it contains \x0A ( \12 ) ok 64 - stash name for natively compiled sub is correct when it contains \x0A ( \12 ) ok 65 - caller() in natively compiled sub returns correct name when it contains \x0A ( \12 ) ok 66 - %DB::sub entry for natively compiled sub is correct when it contains \x0A ( \12 ) ok 67 - stash name for renamed closure is correct when it contains \x0B ( \13 ) ok 68 - caller() in renamed closure returns correct name when it contains \x0B ( \13 ) ok 69 - %DB::sub entry for renamed closure is correct when it contains \x0B ( \13 ) ok 70 - stash name for natively compiled sub is correct when it contains \x0B ( \13 ) ok 71 - caller() in natively compiled sub returns correct name when it contains \x0B ( \13 ) ok 72 - %DB::sub entry for natively compiled sub is correct when it contains \x0B ( \13 ) ok 73 - stash name for renamed closure is correct when it contains \x0C ( \14 ) ok 74 - caller() in renamed closure returns correct name when it contains \x0C ( \14 ) ok 75 - %DB::sub entry for renamed closure is correct when it contains \x0C ( \14 ) ok 76 - stash name for natively compiled sub is correct when it contains \x0C ( \14 ) ok 77 - caller() in natively compiled sub returns correct name when it contains \x0C ( \14 ) ok 78 - %DB::sub entry for natively compiled sub is correct when it contains \x0C ( \14 ) ok 79 - stash name for renamed closure is correct when it contains \x0D ( \15 ) ok 80 - caller() in renamed closure returns correct name when it contains \x0D ( \15 ) ok 81 - %DB::sub entry for renamed closure is correct when it contains \x0D ( \15 ) ok 82 - stash name for natively compiled sub is correct when it contains \x0D ( \15 ) ok 83 - caller() in natively compiled sub returns correct name when it contains \x0D ( \15 ) ok 84 - %DB::sub entry for natively compiled sub is correct when it contains \x0D ( \15 ) ok 85 - stash name for renamed closure is correct when it contains \x0E ( \16 ) ok 86 - caller() in renamed closure returns correct name when it contains \x0E ( \16 ) ok 87 - %DB::sub entry for renamed closure is correct when it contains \x0E ( \16 ) ok 88 - stash name for natively compiled sub is correct when it contains \x0E ( \16 ) ok 89 - caller() in natively compiled sub returns correct name when it contains \x0E ( \16 ) ok 90 - %DB::sub entry for natively compiled sub is correct when it contains \x0E ( \16 ) ok 91 - stash name for renamed closure is correct when it contains \x0F ( \17 ) ok 92 - caller() in renamed closure returns correct name when it contains \x0F ( \17 ) ok 93 - %DB::sub entry for renamed closure is correct when it contains \x0F ( \17 ) ok 94 - stash name for natively compiled sub is correct when it contains \x0F ( \17 ) ok 95 - caller() in natively compiled sub returns correct name when it contains \x0F ( \17 ) ok 96 - %DB::sub entry for natively compiled sub is correct when it contains \x0F ( \17 ) ok 97 - stash name for renamed closure is correct when it contains \x10 ( \20 ) ok 98 - caller() in renamed closure returns correct name when it contains \x10 ( \20 ) ok 99 - %DB::sub entry for renamed closure is correct when it contains \x10 ( \20 ) ok 100 - stash name for natively compiled sub is correct when it contains \x10 ( \20 ) ok 101 - caller() in natively compiled sub returns correct name when it contains \x10 ( \20 ) ok 102 - %DB::sub entry for natively compiled sub is correct when it contains \x10 ( \20 ) ok 103 - stash name for renamed closure is correct when it contains \x11 ( \21 ) ok 104 - caller() in renamed closure returns correct name when it contains \x11 ( \21 ) ok 105 - %DB::sub entry for renamed closure is correct when it contains \x11 ( \21 ) ok 106 - stash name for natively compiled sub is correct when it contains \x11 ( \21 ) ok 107 - caller() in natively compiled sub returns correct name when it contains \x11 ( \21 ) ok 108 - %DB::sub entry for natively compiled sub is correct when it contains \x11 ( \21 ) ok 109 - stash name for renamed closure is correct when it contains \x12 ( \22 ) ok 110 - caller() in renamed closure returns correct name when it contains \x12 ( \22 ) ok 111 - %DB::sub entry for renamed closure is correct when it contains \x12 ( \22 ) ok 112 - stash name for natively compiled sub is correct when it contains \x12 ( \22 ) ok 113 - caller() in natively compiled sub returns correct name when it contains \x12 ( \22 ) ok 114 - %DB::sub entry for natively compiled sub is correct when it contains \x12 ( \22 ) ok 115 - stash name for renamed closure is correct when it contains \x13 ( \23 ) ok 116 - caller() in renamed closure returns correct name when it contains \x13 ( \23 ) ok 117 - %DB::sub entry for renamed closure is correct when it contains \x13 ( \23 ) ok 118 - stash name for natively compiled sub is correct when it contains \x13 ( \23 ) ok 119 - caller() in natively compiled sub returns correct name when it contains \x13 ( \23 ) ok 120 - %DB::sub entry for natively compiled sub is correct when it contains \x13 ( \23 ) ok 121 - stash name for renamed closure is correct when it contains \x14 ( \24 ) ok 122 - caller() in renamed closure returns correct name when it contains \x14 ( \24 ) ok 123 - %DB::sub entry for renamed closure is correct when it contains \x14 ( \24 ) ok 124 - stash name for natively compiled sub is correct when it contains \x14 ( \24 ) ok 125 - caller() in natively compiled sub returns correct name when it contains \x14 ( \24 ) ok 126 - %DB::sub entry for natively compiled sub is correct when it contains \x14 ( \24 ) ok 127 - stash name for renamed closure is correct when it contains \x15 ( \25 ) ok 128 - caller() in renamed closure returns correct name when it contains \x15 ( \25 ) ok 129 - %DB::sub entry for renamed closure is correct when it contains \x15 ( \25 ) ok 130 - stash name for natively compiled sub is correct when it contains \x15 ( \25 ) ok 131 - caller() in natively compiled sub returns correct name when it contains \x15 ( \25 ) ok 132 - %DB::sub entry for natively compiled sub is correct when it contains \x15 ( \25 ) ok 133 - stash name for renamed closure is correct when it contains \x16 ( \26 ) ok 134 - caller() in renamed closure returns correct name when it contains \x16 ( \26 ) ok 135 - %DB::sub entry for renamed closure is correct when it contains \x16 ( \26 ) ok 136 - stash name for natively compiled sub is correct when it contains \x16 ( \26 ) ok 137 - caller() in natively compiled sub returns correct name when it contains \x16 ( \26 ) ok 138 - %DB::sub entry for natively compiled sub is correct when it contains \x16 ( \26 ) ok 139 - stash name for renamed closure is correct when it contains \x17 ( \27 ) ok 140 - caller() in renamed closure returns correct name when it contains \x17 ( \27 ) ok 141 - %DB::sub entry for renamed closure is correct when it contains \x17 ( \27 ) ok 142 - stash name for natively compiled sub is correct when it contains \x17 ( \27 ) ok 143 - caller() in natively compiled sub returns correct name when it contains \x17 ( \27 ) ok 144 - %DB::sub entry for natively compiled sub is correct when it contains \x17 ( \27 ) ok 145 - stash name for renamed closure is correct when it contains \x18 ( \30 ) ok 146 - caller() in renamed closure returns correct name when it contains \x18 ( \30 ) ok 147 - %DB::sub entry for renamed closure is correct when it contains \x18 ( \30 ) ok 148 - stash name for natively compiled sub is correct when it contains \x18 ( \30 ) ok 149 - caller() in natively compiled sub returns correct name when it contains \x18 ( \30 ) ok 150 - %DB::sub entry for natively compiled sub is correct when it contains \x18 ( \30 ) ok 151 - stash name for renamed closure is correct when it contains \x19 ( \31 ) ok 152 - caller() in renamed closure returns correct name when it contains \x19 ( \31 ) ok 153 - %DB::sub entry for renamed closure is correct when it contains \x19 ( \31 ) ok 154 - stash name for natively compiled sub is correct when it contains \x19 ( \31 ) ok 155 - caller() in natively compiled sub returns correct name when it contains \x19 ( \31 ) ok 156 - %DB::sub entry for natively compiled sub is correct when it contains \x19 ( \31 ) ok 157 - stash name for renamed closure is correct when it contains \x1A ( \32 ) ok 158 - caller() in renamed closure returns correct name when it contains \x1A ( \32 ) ok 159 - %DB::sub entry for renamed closure is correct when it contains \x1A ( \32 ) ok 160 - stash name for natively compiled sub is correct when it contains \x1A ( \32 ) ok 161 - caller() in natively compiled sub returns correct name when it contains \x1A ( \32 ) ok 162 - %DB::sub entry for natively compiled sub is correct when it contains \x1A ( \32 ) ok 163 - stash name for renamed closure is correct when it contains \x1B ( \33 ) ok 164 - caller() in renamed closure returns correct name when it contains \x1B ( \33 ) ok 165 - %DB::sub entry for renamed closure is correct when it contains \x1B ( \33 ) ok 166 - stash name for natively compiled sub is correct when it contains \x1B ( \33 ) ok 167 - caller() in natively compiled sub returns correct name when it contains \x1B ( \33 ) ok 168 - %DB::sub entry for natively compiled sub is correct when it contains \x1B ( \33 ) ok 169 - stash name for renamed closure is correct when it contains \x1C ( \34 ) ok 170 - caller() in renamed closure returns correct name when it contains \x1C ( \34 ) ok 171 - %DB::sub entry for renamed closure is correct when it contains \x1C ( \34 ) ok 172 - stash name for natively compiled sub is correct when it contains \x1C ( \34 ) ok 173 - caller() in natively compiled sub returns correct name when it contains \x1C ( \34 ) ok 174 - %DB::sub entry for natively compiled sub is correct when it contains \x1C ( \34 ) ok 175 - stash name for renamed closure is correct when it contains \x1D ( \35 ) ok 176 - caller() in renamed closure returns correct name when it contains \x1D ( \35 ) ok 177 - %DB::sub entry for renamed closure is correct when it contains \x1D ( \35 ) ok 178 - stash name for natively compiled sub is correct when it contains \x1D ( \35 ) ok 179 - caller() in natively compiled sub returns correct name when it contains \x1D ( \35 ) ok 180 - %DB::sub entry for natively compiled sub is correct when it contains \x1D ( \35 ) ok 181 - stash name for renamed closure is correct when it contains \x1E ( \36 ) ok 182 - caller() in renamed closure returns correct name when it contains \x1E ( \36 ) ok 183 - %DB::sub entry for renamed closure is correct when it contains \x1E ( \36 ) ok 184 - stash name for natively compiled sub is correct when it contains \x1E ( \36 ) ok 185 - caller() in natively compiled sub returns correct name when it contains \x1E ( \36 ) ok 186 - %DB::sub entry for natively compiled sub is correct when it contains \x1E ( \36 ) ok 187 - stash name for renamed closure is correct when it contains \x1F ( \37 ) ok 188 - caller() in renamed closure returns correct name when it contains \x1F ( \37 ) ok 189 - %DB::sub entry for renamed closure is correct when it contains \x1F ( \37 ) ok 190 - stash name for natively compiled sub is correct when it contains \x1F ( \37 ) ok 191 - caller() in natively compiled sub returns correct name when it contains \x1F ( \37 ) ok 192 - %DB::sub entry for natively compiled sub is correct when it contains \x1F ( \37 ) ok 193 - stash name for renamed closure is correct when it contains \x20 ( ) ok 194 - caller() in renamed closure returns correct name when it contains \x20 ( ) ok 195 - %DB::sub entry for renamed closure is correct when it contains \x20 ( ) ok 196 - stash name for natively compiled sub is correct when it contains \x20 ( ) ok 197 - caller() in natively compiled sub returns correct name when it contains \x20 ( ) ok 198 - %DB::sub entry for natively compiled sub is correct when it contains \x20 ( ) ok 199 - stash name for renamed closure is correct when it contains \x21 ( ! ) ok 200 - caller() in renamed closure returns correct name when it contains \x21 ( ! ) ok 201 - %DB::sub entry for renamed closure is correct when it contains \x21 ( ! ) ok 202 - stash name for natively compiled sub is correct when it contains \x21 ( ! ) ok 203 - caller() in natively compiled sub returns correct name when it contains \x21 ( ! ) ok 204 - %DB::sub entry for natively compiled sub is correct when it contains \x21 ( ! ) ok 205 - stash name for renamed closure is correct when it contains \x22 ( " ) ok 206 - caller() in renamed closure returns correct name when it contains \x22 ( " ) ok 207 - %DB::sub entry for renamed closure is correct when it contains \x22 ( " ) ok 208 - stash name for natively compiled sub is correct when it contains \x22 ( " ) ok 209 - caller() in natively compiled sub returns correct name when it contains \x22 ( " ) ok 210 - %DB::sub entry for natively compiled sub is correct when it contains \x22 ( " ) ok 211 - stash name for renamed closure is correct when it contains \\x23 ( \# ) ok 212 - caller() in renamed closure returns correct name when it contains \\x23 ( \# ) ok 213 - %DB::sub entry for renamed closure is correct when it contains \\x23 ( \# ) ok 214 - stash name for natively compiled sub is correct when it contains \\x23 ( \# ) ok 215 - caller() in natively compiled sub returns correct name when it contains \\x23 ( \# ) ok 216 - %DB::sub entry for natively compiled sub is correct when it contains \\x23 ( \# ) ok 217 - stash name for renamed closure is correct when it contains \x24 ( $ ) ok 218 - caller() in renamed closure returns correct name when it contains \x24 ( $ ) ok 219 - %DB::sub entry for renamed closure is correct when it contains \x24 ( $ ) ok 220 - stash name for natively compiled sub is correct when it contains \x24 ( $ ) ok 221 - caller() in natively compiled sub returns correct name when it contains \x24 ( $ ) ok 222 - %DB::sub entry for natively compiled sub is correct when it contains \x24 ( $ ) ok 223 - stash name for renamed closure is correct when it contains \x25 ( % ) ok 224 - caller() in renamed closure returns correct name when it contains \x25 ( % ) ok 225 - %DB::sub entry for renamed closure is correct when it contains \x25 ( % ) ok 226 - stash name for natively compiled sub is correct when it contains \x25 ( % ) ok 227 - caller() in natively compiled sub returns correct name when it contains \x25 ( % ) ok 228 - %DB::sub entry for natively compiled sub is correct when it contains \x25 ( % ) ok 229 - stash name for renamed closure is correct when it contains \x26 ( & ) ok 230 - caller() in renamed closure returns correct name when it contains \x26 ( & ) ok 231 - %DB::sub entry for renamed closure is correct when it contains \x26 ( & ) ok 232 - stash name for natively compiled sub is correct when it contains \x26 ( & ) ok 233 - caller() in natively compiled sub returns correct name when it contains \x26 ( & ) ok 234 - %DB::sub entry for natively compiled sub is correct when it contains \x26 ( & ) ok 235 - stash name for renamed closure is correct when it contains \x27 ( ' ) ok 236 - caller() in renamed closure returns correct name when it contains \x27 ( ' ) ok 237 - %DB::sub entry for renamed closure is correct when it contains \x27 ( ' ) ok 238 - stash name for natively compiled sub is correct when it contains \x27 ( ' ) ok 239 - caller() in natively compiled sub returns correct name when it contains \x27 ( ' ) ok 240 - %DB::sub entry for natively compiled sub is correct when it contains \x27 ( ' ) ok 241 - stash name for renamed closure is correct when it contains \x28 ( ( ) ok 242 - caller() in renamed closure returns correct name when it contains \x28 ( ( ) ok 243 - %DB::sub entry for renamed closure is correct when it contains \x28 ( ( ) ok 244 - stash name for natively compiled sub is correct when it contains \x28 ( ( ) ok 245 - caller() in natively compiled sub returns correct name when it contains \x28 ( ( ) ok 246 - %DB::sub entry for natively compiled sub is correct when it contains \x28 ( ( ) ok 247 - stash name for renamed closure is correct when it contains \x29 ( ) ) ok 248 - caller() in renamed closure returns correct name when it contains \x29 ( ) ) ok 249 - %DB::sub entry for renamed closure is correct when it contains \x29 ( ) ) ok 250 - stash name for natively compiled sub is correct when it contains \x29 ( ) ) ok 251 - caller() in natively compiled sub returns correct name when it contains \x29 ( ) ) ok 252 - %DB::sub entry for natively compiled sub is correct when it contains \x29 ( ) ) ok 253 - stash name for renamed closure is correct when it contains \x2A ( * ) ok 254 - caller() in renamed closure returns correct name when it contains \x2A ( * ) ok 255 - %DB::sub entry for renamed closure is correct when it contains \x2A ( * ) ok 256 - stash name for natively compiled sub is correct when it contains \x2A ( * ) ok 257 - caller() in natively compiled sub returns correct name when it contains \x2A ( * ) ok 258 - %DB::sub entry for natively compiled sub is correct when it contains \x2A ( * ) ok 259 - stash name for renamed closure is correct when it contains \x2B ( + ) ok 260 - caller() in renamed closure returns correct name when it contains \x2B ( + ) ok 261 - %DB::sub entry for renamed closure is correct when it contains \x2B ( + ) ok 262 - stash name for natively compiled sub is correct when it contains \x2B ( + ) ok 263 - caller() in natively compiled sub returns correct name when it contains \x2B ( + ) ok 264 - %DB::sub entry for natively compiled sub is correct when it contains \x2B ( + ) ok 265 - stash name for renamed closure is correct when it contains \x2C ( , ) ok 266 - caller() in renamed closure returns correct name when it contains \x2C ( , ) ok 267 - %DB::sub entry for renamed closure is correct when it contains \x2C ( , ) ok 268 - stash name for natively compiled sub is correct when it contains \x2C ( , ) ok 269 - caller() in natively compiled sub returns correct name when it contains \x2C ( , ) ok 270 - %DB::sub entry for natively compiled sub is correct when it contains \x2C ( , ) ok 271 - stash name for renamed closure is correct when it contains \x2D ( - ) ok 272 - caller() in renamed closure returns correct name when it contains \x2D ( - ) ok 273 - %DB::sub entry for renamed closure is correct when it contains \x2D ( - ) ok 274 - stash name for natively compiled sub is correct when it contains \x2D ( - ) ok 275 - caller() in natively compiled sub returns correct name when it contains \x2D ( - ) ok 276 - %DB::sub entry for natively compiled sub is correct when it contains \x2D ( - ) ok 277 - stash name for renamed closure is correct when it contains \x2E ( . ) ok 278 - caller() in renamed closure returns correct name when it contains \x2E ( . ) ok 279 - %DB::sub entry for renamed closure is correct when it contains \x2E ( . ) ok 280 - stash name for natively compiled sub is correct when it contains \x2E ( . ) ok 281 - caller() in natively compiled sub returns correct name when it contains \x2E ( . ) ok 282 - %DB::sub entry for natively compiled sub is correct when it contains \x2E ( . ) ok 283 - stash name for renamed closure is correct when it contains \x2F ( / ) ok 284 - caller() in renamed closure returns correct name when it contains \x2F ( / ) ok 285 - %DB::sub entry for renamed closure is correct when it contains \x2F ( / ) ok 286 - stash name for natively compiled sub is correct when it contains \x2F ( / ) ok 287 - caller() in natively compiled sub returns correct name when it contains \x2F ( / ) ok 288 - %DB::sub entry for natively compiled sub is correct when it contains \x2F ( / ) ok 289 - stash name for renamed closure is correct when it contains \x30 ( 0 ) ok 290 - caller() in renamed closure returns correct name when it contains \x30 ( 0 ) ok 291 - %DB::sub entry for renamed closure is correct when it contains \x30 ( 0 ) ok 292 - stash name for natively compiled sub is correct when it contains \x30 ( 0 ) ok 293 - caller() in natively compiled sub returns correct name when it contains \x30 ( 0 ) ok 294 - %DB::sub entry for natively compiled sub is correct when it contains \x30 ( 0 ) ok 295 - stash name for renamed closure is correct when it contains \x31 ( 1 ) ok 296 - caller() in renamed closure returns correct name when it contains \x31 ( 1 ) ok 297 - %DB::sub entry for renamed closure is correct when it contains \x31 ( 1 ) ok 298 - stash name for natively compiled sub is correct when it contains \x31 ( 1 ) ok 299 - caller() in natively compiled sub returns correct name when it contains \x31 ( 1 ) ok 300 - %DB::sub entry for natively compiled sub is correct when it contains \x31 ( 1 ) ok 301 - stash name for renamed closure is correct when it contains \x32 ( 2 ) ok 302 - caller() in renamed closure returns correct name when it contains \x32 ( 2 ) ok 303 - %DB::sub entry for renamed closure is correct when it contains \x32 ( 2 ) ok 304 - stash name for natively compiled sub is correct when it contains \x32 ( 2 ) ok 305 - caller() in natively compiled sub returns correct name when it contains \x32 ( 2 ) ok 306 - %DB::sub entry for natively compiled sub is correct when it contains \x32 ( 2 ) ok 307 - stash name for renamed closure is correct when it contains \x33 ( 3 ) ok 308 - caller() in renamed closure returns correct name when it contains \x33 ( 3 ) ok 309 - %DB::sub entry for renamed closure is correct when it contains \x33 ( 3 ) ok 310 - stash name for natively compiled sub is correct when it contains \x33 ( 3 ) ok 311 - caller() in natively compiled sub returns correct name when it contains \x33 ( 3 ) ok 312 - %DB::sub entry for natively compiled sub is correct when it contains \x33 ( 3 ) ok 313 - stash name for renamed closure is correct when it contains \x34 ( 4 ) ok 314 - caller() in renamed closure returns correct name when it contains \x34 ( 4 ) ok 315 - %DB::sub entry for renamed closure is correct when it contains \x34 ( 4 ) ok 316 - stash name for natively compiled sub is correct when it contains \x34 ( 4 ) ok 317 - caller() in natively compiled sub returns correct name when it contains \x34 ( 4 ) ok 318 - %DB::sub entry for natively compiled sub is correct when it contains \x34 ( 4 ) ok 319 - stash name for renamed closure is correct when it contains \x35 ( 5 ) ok 320 - caller() in renamed closure returns correct name when it contains \x35 ( 5 ) ok 321 - %DB::sub entry for renamed closure is correct when it contains \x35 ( 5 ) ok 322 - stash name for natively compiled sub is correct when it contains \x35 ( 5 ) ok 323 - caller() in natively compiled sub returns correct name when it contains \x35 ( 5 ) ok 324 - %DB::sub entry for natively compiled sub is correct when it contains \x35 ( 5 ) ok 325 - stash name for renamed closure is correct when it contains \x36 ( 6 ) ok 326 - caller() in renamed closure returns correct name when it contains \x36 ( 6 ) ok 327 - %DB::sub entry for renamed closure is correct when it contains \x36 ( 6 ) ok 328 - stash name for natively compiled sub is correct when it contains \x36 ( 6 ) ok 329 - caller() in natively compiled sub returns correct name when it contains \x36 ( 6 ) ok 330 - %DB::sub entry for natively compiled sub is correct when it contains \x36 ( 6 ) ok 331 - stash name for renamed closure is correct when it contains \x37 ( 7 ) ok 332 - caller() in renamed closure returns correct name when it contains \x37 ( 7 ) ok 333 - %DB::sub entry for renamed closure is correct when it contains \x37 ( 7 ) ok 334 - stash name for natively compiled sub is correct when it contains \x37 ( 7 ) ok 335 - caller() in natively compiled sub returns correct name when it contains \x37 ( 7 ) ok 336 - %DB::sub entry for natively compiled sub is correct when it contains \x37 ( 7 ) ok 337 - stash name for renamed closure is correct when it contains \x38 ( 8 ) ok 338 - caller() in renamed closure returns correct name when it contains \x38 ( 8 ) ok 339 - %DB::sub entry for renamed closure is correct when it contains \x38 ( 8 ) ok 340 - stash name for natively compiled sub is correct when it contains \x38 ( 8 ) ok 341 - caller() in natively compiled sub returns correct name when it contains \x38 ( 8 ) ok 342 - %DB::sub entry for natively compiled sub is correct when it contains \x38 ( 8 ) ok 343 - stash name for renamed closure is correct when it contains \x39 ( 9 ) ok 344 - caller() in renamed closure returns correct name when it contains \x39 ( 9 ) ok 345 - %DB::sub entry for renamed closure is correct when it contains \x39 ( 9 ) ok 346 - stash name for natively compiled sub is correct when it contains \x39 ( 9 ) ok 347 - caller() in natively compiled sub returns correct name when it contains \x39 ( 9 ) ok 348 - %DB::sub entry for natively compiled sub is correct when it contains \x39 ( 9 ) ok 349 - stash name for renamed closure is correct when it contains \x3A ( : ) ok 350 - caller() in renamed closure returns correct name when it contains \x3A ( : ) ok 351 - %DB::sub entry for renamed closure is correct when it contains \x3A ( : ) ok 352 - stash name for natively compiled sub is correct when it contains \x3A ( : ) ok 353 - caller() in natively compiled sub returns correct name when it contains \x3A ( : ) ok 354 - %DB::sub entry for natively compiled sub is correct when it contains \x3A ( : ) ok 355 - stash name for renamed closure is correct when it contains \x3B ( ; ) ok 356 - caller() in renamed closure returns correct name when it contains \x3B ( ; ) ok 357 - %DB::sub entry for renamed closure is correct when it contains \x3B ( ; ) ok 358 - stash name for natively compiled sub is correct when it contains \x3B ( ; ) ok 359 - caller() in natively compiled sub returns correct name when it contains \x3B ( ; ) ok 360 - %DB::sub entry for natively compiled sub is correct when it contains \x3B ( ; ) ok 361 - stash name for renamed closure is correct when it contains \x3C ( < ) ok 362 - caller() in renamed closure returns correct name when it contains \x3C ( < ) ok 363 - %DB::sub entry for renamed closure is correct when it contains \x3C ( < ) ok 364 - stash name for natively compiled sub is correct when it contains \x3C ( < ) ok 365 - caller() in natively compiled sub returns correct name when it contains \x3C ( < ) ok 366 - %DB::sub entry for natively compiled sub is correct when it contains \x3C ( < ) ok 367 - stash name for renamed closure is correct when it contains \x3D ( = ) ok 368 - caller() in renamed closure returns correct name when it contains \x3D ( = ) ok 369 - %DB::sub entry for renamed closure is correct when it contains \x3D ( = ) ok 370 - stash name for natively compiled sub is correct when it contains \x3D ( = ) ok 371 - caller() in natively compiled sub returns correct name when it contains \x3D ( = ) ok 372 - %DB::sub entry for natively compiled sub is correct when it contains \x3D ( = ) ok 373 - stash name for renamed closure is correct when it contains \x3E ( > ) ok 374 - caller() in renamed closure returns correct name when it contains \x3E ( > ) ok 375 - %DB::sub entry for renamed closure is correct when it contains \x3E ( > ) ok 376 - stash name for natively compiled sub is correct when it contains \x3E ( > ) ok 377 - caller() in natively compiled sub returns correct name when it contains \x3E ( > ) ok 378 - %DB::sub entry for natively compiled sub is correct when it contains \x3E ( > ) ok 379 - stash name for renamed closure is correct when it contains \x3F ( ? ) ok 380 - caller() in renamed closure returns correct name when it contains \x3F ( ? ) ok 381 - %DB::sub entry for renamed closure is correct when it contains \x3F ( ? ) ok 382 - stash name for natively compiled sub is correct when it contains \x3F ( ? ) ok 383 - caller() in natively compiled sub returns correct name when it contains \x3F ( ? ) ok 384 - %DB::sub entry for natively compiled sub is correct when it contains \x3F ( ? ) ok 385 - stash name for renamed closure is correct when it contains \x40 ( @ ) ok 386 - caller() in renamed closure returns correct name when it contains \x40 ( @ ) ok 387 - %DB::sub entry for renamed closure is correct when it contains \x40 ( @ ) ok 388 - stash name for natively compiled sub is correct when it contains \x40 ( @ ) ok 389 - caller() in natively compiled sub returns correct name when it contains \x40 ( @ ) ok 390 - %DB::sub entry for natively compiled sub is correct when it contains \x40 ( @ ) ok 391 - stash name for renamed closure is correct when it contains \x41 ( A ) ok 392 - caller() in renamed closure returns correct name when it contains \x41 ( A ) ok 393 - %DB::sub entry for renamed closure is correct when it contains \x41 ( A ) ok 394 - stash name for natively compiled sub is correct when it contains \x41 ( A ) ok 395 - caller() in natively compiled sub returns correct name when it contains \x41 ( A ) ok 396 - %DB::sub entry for natively compiled sub is correct when it contains \x41 ( A ) ok 397 - stash name for renamed closure is correct when it contains \x42 ( B ) ok 398 - caller() in renamed closure returns correct name when it contains \x42 ( B ) ok 399 - %DB::sub entry for renamed closure is correct when it contains \x42 ( B ) ok 400 - stash name for natively compiled sub is correct when it contains \x42 ( B ) ok 401 - caller() in natively compiled sub returns correct name when it contains \x42 ( B ) ok 402 - %DB::sub entry for natively compiled sub is correct when it contains \x42 ( B ) ok 403 - stash name for renamed closure is correct when it contains \x43 ( C ) ok 404 - caller() in renamed closure returns correct name when it contains \x43 ( C ) ok 405 - %DB::sub entry for renamed closure is correct when it contains \x43 ( C ) ok 406 - stash name for natively compiled sub is correct when it contains \x43 ( C ) ok 407 - caller() in natively compiled sub returns correct name when it contains \x43 ( C ) ok 408 - %DB::sub entry for natively compiled sub is correct when it contains \x43 ( C ) ok 409 - stash name for renamed closure is correct when it contains \x44 ( D ) ok 410 - caller() in renamed closure returns correct name when it contains \x44 ( D ) ok 411 - %DB::sub entry for renamed closure is correct when it contains \x44 ( D ) ok 412 - stash name for natively compiled sub is correct when it contains \x44 ( D ) ok 413 - caller() in natively compiled sub returns correct name when it contains \x44 ( D ) ok 414 - %DB::sub entry for natively compiled sub is correct when it contains \x44 ( D ) ok 415 - stash name for renamed closure is correct when it contains \x45 ( E ) ok 416 - caller() in renamed closure returns correct name when it contains \x45 ( E ) ok 417 - %DB::sub entry for renamed closure is correct when it contains \x45 ( E ) ok 418 - stash name for natively compiled sub is correct when it contains \x45 ( E ) ok 419 - caller() in natively compiled sub returns correct name when it contains \x45 ( E ) ok 420 - %DB::sub entry for natively compiled sub is correct when it contains \x45 ( E ) ok 421 - stash name for renamed closure is correct when it contains \x46 ( F ) ok 422 - caller() in renamed closure returns correct name when it contains \x46 ( F ) ok 423 - %DB::sub entry for renamed closure is correct when it contains \x46 ( F ) ok 424 - stash name for natively compiled sub is correct when it contains \x46 ( F ) ok 425 - caller() in natively compiled sub returns correct name when it contains \x46 ( F ) ok 426 - %DB::sub entry for natively compiled sub is correct when it contains \x46 ( F ) ok 427 - stash name for renamed closure is correct when it contains \x47 ( G ) ok 428 - caller() in renamed closure returns correct name when it contains \x47 ( G ) ok 429 - %DB::sub entry for renamed closure is correct when it contains \x47 ( G ) ok 430 - stash name for natively compiled sub is correct when it contains \x47 ( G ) ok 431 - caller() in natively compiled sub returns correct name when it contains \x47 ( G ) ok 432 - %DB::sub entry for natively compiled sub is correct when it contains \x47 ( G ) ok 433 - stash name for renamed closure is correct when it contains \x48 ( H ) ok 434 - caller() in renamed closure returns correct name when it contains \x48 ( H ) ok 435 - %DB::sub entry for renamed closure is correct when it contains \x48 ( H ) ok 436 - stash name for natively compiled sub is correct when it contains \x48 ( H ) ok 437 - caller() in natively compiled sub returns correct name when it contains \x48 ( H ) ok 438 - %DB::sub entry for natively compiled sub is correct when it contains \x48 ( H ) ok 439 - stash name for renamed closure is correct when it contains \x49 ( I ) ok 440 - caller() in renamed closure returns correct name when it contains \x49 ( I ) ok 441 - %DB::sub entry for renamed closure is correct when it contains \x49 ( I ) ok 442 - stash name for natively compiled sub is correct when it contains \x49 ( I ) ok 443 - caller() in natively compiled sub returns correct name when it contains \x49 ( I ) ok 444 - %DB::sub entry for natively compiled sub is correct when it contains \x49 ( I ) ok 445 - stash name for renamed closure is correct when it contains \x4A ( J ) ok 446 - caller() in renamed closure returns correct name when it contains \x4A ( J ) ok 447 - %DB::sub entry for renamed closure is correct when it contains \x4A ( J ) ok 448 - stash name for natively compiled sub is correct when it contains \x4A ( J ) ok 449 - caller() in natively compiled sub returns correct name when it contains \x4A ( J ) ok 450 - %DB::sub entry for natively compiled sub is correct when it contains \x4A ( J ) ok 451 - stash name for renamed closure is correct when it contains \x4B ( K ) ok 452 - caller() in renamed closure returns correct name when it contains \x4B ( K ) ok 453 - %DB::sub entry for renamed closure is correct when it contains \x4B ( K ) ok 454 - stash name for natively compiled sub is correct when it contains \x4B ( K ) ok 455 - caller() in natively compiled sub returns correct name when it contains \x4B ( K ) ok 456 - %DB::sub entry for natively compiled sub is correct when it contains \x4B ( K ) ok 457 - stash name for renamed closure is correct when it contains \x4C ( L ) ok 458 - caller() in renamed closure returns correct name when it contains \x4C ( L ) ok 459 - %DB::sub entry for renamed closure is correct when it contains \x4C ( L ) ok 460 - stash name for natively compiled sub is correct when it contains \x4C ( L ) ok 461 - caller() in natively compiled sub returns correct name when it contains \x4C ( L ) ok 462 - %DB::sub entry for natively compiled sub is correct when it contains \x4C ( L ) ok 463 - stash name for renamed closure is correct when it contains \x4D ( M ) ok 464 - caller() in renamed closure returns correct name when it contains \x4D ( M ) ok 465 - %DB::sub entry for renamed closure is correct when it contains \x4D ( M ) ok 466 - stash name for natively compiled sub is correct when it contains \x4D ( M ) ok 467 - caller() in natively compiled sub returns correct name when it contains \x4D ( M ) ok 468 - %DB::sub entry for natively compiled sub is correct when it contains \x4D ( M ) ok 469 - stash name for renamed closure is correct when it contains \x4E ( N ) ok 470 - caller() in renamed closure returns correct name when it contains \x4E ( N ) ok 471 - %DB::sub entry for renamed closure is correct when it contains \x4E ( N ) ok 472 - stash name for natively compiled sub is correct when it contains \x4E ( N ) ok 473 - caller() in natively compiled sub returns correct name when it contains \x4E ( N ) ok 474 - %DB::sub entry for natively compiled sub is correct when it contains \x4E ( N ) ok 475 - stash name for renamed closure is correct when it contains \x4F ( O ) ok 476 - caller() in renamed closure returns correct name when it contains \x4F ( O ) ok 477 - %DB::sub entry for renamed closure is correct when it contains \x4F ( O ) ok 478 - stash name for natively compiled sub is correct when it contains \x4F ( O ) ok 479 - caller() in natively compiled sub returns correct name when it contains \x4F ( O ) ok 480 - %DB::sub entry for natively compiled sub is correct when it contains \x4F ( O ) ok 481 - stash name for renamed closure is correct when it contains \x50 ( P ) ok 482 - caller() in renamed closure returns correct name when it contains \x50 ( P ) ok 483 - %DB::sub entry for renamed closure is correct when it contains \x50 ( P ) ok 484 - stash name for natively compiled sub is correct when it contains \x50 ( P ) ok 485 - caller() in natively compiled sub returns correct name when it contains \x50 ( P ) ok 486 - %DB::sub entry for natively compiled sub is correct when it contains \x50 ( P ) ok 487 - stash name for renamed closure is correct when it contains \x51 ( Q ) ok 488 - caller() in renamed closure returns correct name when it contains \x51 ( Q ) ok 489 - %DB::sub entry for renamed closure is correct when it contains \x51 ( Q ) ok 490 - stash name for natively compiled sub is correct when it contains \x51 ( Q ) ok 491 - caller() in natively compiled sub returns correct name when it contains \x51 ( Q ) ok 492 - %DB::sub entry for natively compiled sub is correct when it contains \x51 ( Q ) ok 493 - stash name for renamed closure is correct when it contains \x52 ( R ) ok 494 - caller() in renamed closure returns correct name when it contains \x52 ( R ) ok 495 - %DB::sub entry for renamed closure is correct when it contains \x52 ( R ) ok 496 - stash name for natively compiled sub is correct when it contains \x52 ( R ) ok 497 - caller() in natively compiled sub returns correct name when it contains \x52 ( R ) ok 498 - %DB::sub entry for natively compiled sub is correct when it contains \x52 ( R ) ok 499 - stash name for renamed closure is correct when it contains \x53 ( S ) ok 500 - caller() in renamed closure returns correct name when it contains \x53 ( S ) ok 501 - %DB::sub entry for renamed closure is correct when it contains \x53 ( S ) ok 502 - stash name for natively compiled sub is correct when it contains \x53 ( S ) ok 503 - caller() in natively compiled sub returns correct name when it contains \x53 ( S ) ok 504 - %DB::sub entry for natively compiled sub is correct when it contains \x53 ( S ) ok 505 - stash name for renamed closure is correct when it contains \x54 ( T ) ok 506 - caller() in renamed closure returns correct name when it contains \x54 ( T ) ok 507 - %DB::sub entry for renamed closure is correct when it contains \x54 ( T ) ok 508 - stash name for natively compiled sub is correct when it contains \x54 ( T ) ok 509 - caller() in natively compiled sub returns correct name when it contains \x54 ( T ) ok 510 - %DB::sub entry for natively compiled sub is correct when it contains \x54 ( T ) ok 511 - stash name for renamed closure is correct when it contains \x55 ( U ) ok 512 - caller() in renamed closure returns correct name when it contains \x55 ( U ) ok 513 - %DB::sub entry for renamed closure is correct when it contains \x55 ( U ) ok 514 - stash name for natively compiled sub is correct when it contains \x55 ( U ) ok 515 - caller() in natively compiled sub returns correct name when it contains \x55 ( U ) ok 516 - %DB::sub entry for natively compiled sub is correct when it contains \x55 ( U ) ok 517 - stash name for renamed closure is correct when it contains \x56 ( V ) ok 518 - caller() in renamed closure returns correct name when it contains \x56 ( V ) ok 519 - %DB::sub entry for renamed closure is correct when it contains \x56 ( V ) ok 520 - stash name for natively compiled sub is correct when it contains \x56 ( V ) ok 521 - caller() in natively compiled sub returns correct name when it contains \x56 ( V ) ok 522 - %DB::sub entry for natively compiled sub is correct when it contains \x56 ( V ) ok 523 - stash name for renamed closure is correct when it contains \x57 ( W ) ok 524 - caller() in renamed closure returns correct name when it contains \x57 ( W ) ok 525 - %DB::sub entry for renamed closure is correct when it contains \x57 ( W ) ok 526 - stash name for natively compiled sub is correct when it contains \x57 ( W ) ok 527 - caller() in natively compiled sub returns correct name when it contains \x57 ( W ) ok 528 - %DB::sub entry for natively compiled sub is correct when it contains \x57 ( W ) ok 529 - stash name for renamed closure is correct when it contains \x58 ( X ) ok 530 - caller() in renamed closure returns correct name when it contains \x58 ( X ) ok 531 - %DB::sub entry for renamed closure is correct when it contains \x58 ( X ) ok 532 - stash name for natively compiled sub is correct when it contains \x58 ( X ) ok 533 - caller() in natively compiled sub returns correct name when it contains \x58 ( X ) ok 534 - %DB::sub entry for natively compiled sub is correct when it contains \x58 ( X ) ok 535 - stash name for renamed closure is correct when it contains \x59 ( Y ) ok 536 - caller() in renamed closure returns correct name when it contains \x59 ( Y ) ok 537 - %DB::sub entry for renamed closure is correct when it contains \x59 ( Y ) ok 538 - stash name for natively compiled sub is correct when it contains \x59 ( Y ) ok 539 - caller() in natively compiled sub returns correct name when it contains \x59 ( Y ) ok 540 - %DB::sub entry for natively compiled sub is correct when it contains \x59 ( Y ) ok 541 - stash name for renamed closure is correct when it contains \x5A ( Z ) ok 542 - caller() in renamed closure returns correct name when it contains \x5A ( Z ) ok 543 - %DB::sub entry for renamed closure is correct when it contains \x5A ( Z ) ok 544 - stash name for natively compiled sub is correct when it contains \x5A ( Z ) ok 545 - caller() in natively compiled sub returns correct name when it contains \x5A ( Z ) ok 546 - %DB::sub entry for natively compiled sub is correct when it contains \x5A ( Z ) ok 547 - stash name for renamed closure is correct when it contains \x5B ( [ ) ok 548 - caller() in renamed closure returns correct name when it contains \x5B ( [ ) ok 549 - %DB::sub entry for renamed closure is correct when it contains \x5B ( [ ) ok 550 - stash name for natively compiled sub is correct when it contains \x5B ( [ ) ok 551 - caller() in natively compiled sub returns correct name when it contains \x5B ( [ ) ok 552 - %DB::sub entry for natively compiled sub is correct when it contains \x5B ( [ ) ok 553 - stash name for renamed closure is correct when it contains \x5C ( \ ) ok 554 - caller() in renamed closure returns correct name when it contains \x5C ( \ ) ok 555 - %DB::sub entry for renamed closure is correct when it contains \x5C ( \ ) ok 556 - stash name for natively compiled sub is correct when it contains \x5C ( \ ) ok 557 - caller() in natively compiled sub returns correct name when it contains \x5C ( \ ) ok 558 - %DB::sub entry for natively compiled sub is correct when it contains \x5C ( \ ) ok 559 - stash name for renamed closure is correct when it contains \x5D ( ] ) ok 560 - caller() in renamed closure returns correct name when it contains \x5D ( ] ) ok 561 - %DB::sub entry for renamed closure is correct when it contains \x5D ( ] ) ok 562 - stash name for natively compiled sub is correct when it contains \x5D ( ] ) ok 563 - caller() in natively compiled sub returns correct name when it contains \x5D ( ] ) ok 564 - %DB::sub entry for natively compiled sub is correct when it contains \x5D ( ] ) ok 565 - stash name for renamed closure is correct when it contains \x5E ( ^ ) ok 566 - caller() in renamed closure returns correct name when it contains \x5E ( ^ ) ok 567 - %DB::sub entry for renamed closure is correct when it contains \x5E ( ^ ) ok 568 - stash name for natively compiled sub is correct when it contains \x5E ( ^ ) ok 569 - caller() in natively compiled sub returns correct name when it contains \x5E ( ^ ) ok 570 - %DB::sub entry for natively compiled sub is correct when it contains \x5E ( ^ ) ok 571 - stash name for renamed closure is correct when it contains \x5F ( _ ) ok 572 - caller() in renamed closure returns correct name when it contains \x5F ( _ ) ok 573 - %DB::sub entry for renamed closure is correct when it contains \x5F ( _ ) ok 574 - stash name for natively compiled sub is correct when it contains \x5F ( _ ) ok 575 - caller() in natively compiled sub returns correct name when it contains \x5F ( _ ) ok 576 - %DB::sub entry for natively compiled sub is correct when it contains \x5F ( _ ) ok 577 - stash name for renamed closure is correct when it contains \x60 ( ` ) ok 578 - caller() in renamed closure returns correct name when it contains \x60 ( ` ) ok 579 - %DB::sub entry for renamed closure is correct when it contains \x60 ( ` ) ok 580 - stash name for natively compiled sub is correct when it contains \x60 ( ` ) ok 581 - caller() in natively compiled sub returns correct name when it contains \x60 ( ` ) ok 582 - %DB::sub entry for natively compiled sub is correct when it contains \x60 ( ` ) ok 583 - stash name for renamed closure is correct when it contains \x61 ( a ) ok 584 - caller() in renamed closure returns correct name when it contains \x61 ( a ) ok 585 - %DB::sub entry for renamed closure is correct when it contains \x61 ( a ) ok 586 - stash name for natively compiled sub is correct when it contains \x61 ( a ) ok 587 - caller() in natively compiled sub returns correct name when it contains \x61 ( a ) ok 588 - %DB::sub entry for natively compiled sub is correct when it contains \x61 ( a ) ok 589 - stash name for renamed closure is correct when it contains \x62 ( b ) ok 590 - caller() in renamed closure returns correct name when it contains \x62 ( b ) ok 591 - %DB::sub entry for renamed closure is correct when it contains \x62 ( b ) ok 592 - stash name for natively compiled sub is correct when it contains \x62 ( b ) ok 593 - caller() in natively compiled sub returns correct name when it contains \x62 ( b ) ok 594 - %DB::sub entry for natively compiled sub is correct when it contains \x62 ( b ) ok 595 - stash name for renamed closure is correct when it contains \x63 ( c ) ok 596 - caller() in renamed closure returns correct name when it contains \x63 ( c ) ok 597 - %DB::sub entry for renamed closure is correct when it contains \x63 ( c ) ok 598 - stash name for natively compiled sub is correct when it contains \x63 ( c ) ok 599 - caller() in natively compiled sub returns correct name when it contains \x63 ( c ) ok 600 - %DB::sub entry for natively compiled sub is correct when it contains \x63 ( c ) ok 601 - stash name for renamed closure is correct when it contains \x64 ( d ) ok 602 - caller() in renamed closure returns correct name when it contains \x64 ( d ) ok 603 - %DB::sub entry for renamed closure is correct when it contains \x64 ( d ) ok 604 - stash name for natively compiled sub is correct when it contains \x64 ( d ) ok 605 - caller() in natively compiled sub returns correct name when it contains \x64 ( d ) ok 606 - %DB::sub entry for natively compiled sub is correct when it contains \x64 ( d ) ok 607 - stash name for renamed closure is correct when it contains \x65 ( e ) ok 608 - caller() in renamed closure returns correct name when it contains \x65 ( e ) ok 609 - %DB::sub entry for renamed closure is correct when it contains \x65 ( e ) ok 610 - stash name for natively compiled sub is correct when it contains \x65 ( e ) ok 611 - caller() in natively compiled sub returns correct name when it contains \x65 ( e ) ok 612 - %DB::sub entry for natively compiled sub is correct when it contains \x65 ( e ) ok 613 - stash name for renamed closure is correct when it contains \x66 ( f ) ok 614 - caller() in renamed closure returns correct name when it contains \x66 ( f ) ok 615 - %DB::sub entry for renamed closure is correct when it contains \x66 ( f ) ok 616 - stash name for natively compiled sub is correct when it contains \x66 ( f ) ok 617 - caller() in natively compiled sub returns correct name when it contains \x66 ( f ) ok 618 - %DB::sub entry for natively compiled sub is correct when it contains \x66 ( f ) ok 619 - stash name for renamed closure is correct when it contains \x67 ( g ) ok 620 - caller() in renamed closure returns correct name when it contains \x67 ( g ) ok 621 - %DB::sub entry for renamed closure is correct when it contains \x67 ( g ) ok 622 - stash name for natively compiled sub is correct when it contains \x67 ( g ) ok 623 - caller() in natively compiled sub returns correct name when it contains \x67 ( g ) ok 624 - %DB::sub entry for natively compiled sub is correct when it contains \x67 ( g ) ok 625 - stash name for renamed closure is correct when it contains \x68 ( h ) ok 626 - caller() in renamed closure returns correct name when it contains \x68 ( h ) ok 627 - %DB::sub entry for renamed closure is correct when it contains \x68 ( h ) ok 628 - stash name for natively compiled sub is correct when it contains \x68 ( h ) ok 629 - caller() in natively compiled sub returns correct name when it contains \x68 ( h ) ok 630 - %DB::sub entry for natively compiled sub is correct when it contains \x68 ( h ) ok 631 - stash name for renamed closure is correct when it contains \x69 ( i ) ok 632 - caller() in renamed closure returns correct name when it contains \x69 ( i ) ok 633 - %DB::sub entry for renamed closure is correct when it contains \x69 ( i ) ok 634 - stash name for natively compiled sub is correct when it contains \x69 ( i ) ok 635 - caller() in natively compiled sub returns correct name when it contains \x69 ( i ) ok 636 - %DB::sub entry for natively compiled sub is correct when it contains \x69 ( i ) ok 637 - stash name for renamed closure is correct when it contains \x6A ( j ) ok 638 - caller() in renamed closure returns correct name when it contains \x6A ( j ) ok 639 - %DB::sub entry for renamed closure is correct when it contains \x6A ( j ) ok 640 - stash name for natively compiled sub is correct when it contains \x6A ( j ) ok 641 - caller() in natively compiled sub returns correct name when it contains \x6A ( j ) ok 642 - %DB::sub entry for natively compiled sub is correct when it contains \x6A ( j ) ok 643 - stash name for renamed closure is correct when it contains \x6B ( k ) ok 644 - caller() in renamed closure returns correct name when it contains \x6B ( k ) ok 645 - %DB::sub entry for renamed closure is correct when it contains \x6B ( k ) ok 646 - stash name for natively compiled sub is correct when it contains \x6B ( k ) ok 647 - caller() in natively compiled sub returns correct name when it contains \x6B ( k ) ok 648 - %DB::sub entry for natively compiled sub is correct when it contains \x6B ( k ) ok 649 - stash name for renamed closure is correct when it contains \x6C ( l ) ok 650 - caller() in renamed closure returns correct name when it contains \x6C ( l ) ok 651 - %DB::sub entry for renamed closure is correct when it contains \x6C ( l ) ok 652 - stash name for natively compiled sub is correct when it contains \x6C ( l ) ok 653 - caller() in natively compiled sub returns correct name when it contains \x6C ( l ) ok 654 - %DB::sub entry for natively compiled sub is correct when it contains \x6C ( l ) ok 655 - stash name for renamed closure is correct when it contains \x6D ( m ) ok 656 - caller() in renamed closure returns correct name when it contains \x6D ( m ) ok 657 - %DB::sub entry for renamed closure is correct when it contains \x6D ( m ) ok 658 - stash name for natively compiled sub is correct when it contains \x6D ( m ) ok 659 - caller() in natively compiled sub returns correct name when it contains \x6D ( m ) ok 660 - %DB::sub entry for natively compiled sub is correct when it contains \x6D ( m ) ok 661 - stash name for renamed closure is correct when it contains \x6E ( n ) ok 662 - caller() in renamed closure returns correct name when it contains \x6E ( n ) ok 663 - %DB::sub entry for renamed closure is correct when it contains \x6E ( n ) ok 664 - stash name for natively compiled sub is correct when it contains \x6E ( n ) ok 665 - caller() in natively compiled sub returns correct name when it contains \x6E ( n ) ok 666 - %DB::sub entry for natively compiled sub is correct when it contains \x6E ( n ) ok 667 - stash name for renamed closure is correct when it contains \x6F ( o ) ok 668 - caller() in renamed closure returns correct name when it contains \x6F ( o ) ok 669 - %DB::sub entry for renamed closure is correct when it contains \x6F ( o ) ok 670 - stash name for natively compiled sub is correct when it contains \x6F ( o ) ok 671 - caller() in natively compiled sub returns correct name when it contains \x6F ( o ) ok 672 - %DB::sub entry for natively compiled sub is correct when it contains \x6F ( o ) ok 673 - stash name for renamed closure is correct when it contains \x70 ( p ) ok 674 - caller() in renamed closure returns correct name when it contains \x70 ( p ) ok 675 - %DB::sub entry for renamed closure is correct when it contains \x70 ( p ) ok 676 - stash name for natively compiled sub is correct when it contains \x70 ( p ) ok 677 - caller() in natively compiled sub returns correct name when it contains \x70 ( p ) ok 678 - %DB::sub entry for natively compiled sub is correct when it contains \x70 ( p ) ok 679 - stash name for renamed closure is correct when it contains \x71 ( q ) ok 680 - caller() in renamed closure returns correct name when it contains \x71 ( q ) ok 681 - %DB::sub entry for renamed closure is correct when it contains \x71 ( q ) ok 682 - stash name for natively compiled sub is correct when it contains \x71 ( q ) ok 683 - caller() in natively compiled sub returns correct name when it contains \x71 ( q ) ok 684 - %DB::sub entry for natively compiled sub is correct when it contains \x71 ( q ) ok 685 - stash name for renamed closure is correct when it contains \x72 ( r ) ok 686 - caller() in renamed closure returns correct name when it contains \x72 ( r ) ok 687 - %DB::sub entry for renamed closure is correct when it contains \x72 ( r ) ok 688 - stash name for natively compiled sub is correct when it contains \x72 ( r ) ok 689 - caller() in natively compiled sub returns correct name when it contains \x72 ( r ) ok 690 - %DB::sub entry for natively compiled sub is correct when it contains \x72 ( r ) ok 691 - stash name for renamed closure is correct when it contains \x73 ( s ) ok 692 - caller() in renamed closure returns correct name when it contains \x73 ( s ) ok 693 - %DB::sub entry for renamed closure is correct when it contains \x73 ( s ) ok 694 - stash name for natively compiled sub is correct when it contains \x73 ( s ) ok 695 - caller() in natively compiled sub returns correct name when it contains \x73 ( s ) ok 696 - %DB::sub entry for natively compiled sub is correct when it contains \x73 ( s ) ok 697 - stash name for renamed closure is correct when it contains \x74 ( t ) ok 698 - caller() in renamed closure returns correct name when it contains \x74 ( t ) ok 699 - %DB::sub entry for renamed closure is correct when it contains \x74 ( t ) ok 700 - stash name for natively compiled sub is correct when it contains \x74 ( t ) ok 701 - caller() in natively compiled sub returns correct name when it contains \x74 ( t ) ok 702 - %DB::sub entry for natively compiled sub is correct when it contains \x74 ( t ) ok 703 - stash name for renamed closure is correct when it contains \x75 ( u ) ok 704 - caller() in renamed closure returns correct name when it contains \x75 ( u ) ok 705 - %DB::sub entry for renamed closure is correct when it contains \x75 ( u ) ok 706 - stash name for natively compiled sub is correct when it contains \x75 ( u ) ok 707 - caller() in natively compiled sub returns correct name when it contains \x75 ( u ) ok 708 - %DB::sub entry for natively compiled sub is correct when it contains \x75 ( u ) ok 709 - stash name for renamed closure is correct when it contains \x76 ( v ) ok 710 - caller() in renamed closure returns correct name when it contains \x76 ( v ) ok 711 - %DB::sub entry for renamed closure is correct when it contains \x76 ( v ) ok 712 - stash name for natively compiled sub is correct when it contains \x76 ( v ) ok 713 - caller() in natively compiled sub returns correct name when it contains \x76 ( v ) ok 714 - %DB::sub entry for natively compiled sub is correct when it contains \x76 ( v ) ok 715 - stash name for renamed closure is correct when it contains \x77 ( w ) ok 716 - caller() in renamed closure returns correct name when it contains \x77 ( w ) ok 717 - %DB::sub entry for renamed closure is correct when it contains \x77 ( w ) ok 718 - stash name for natively compiled sub is correct when it contains \x77 ( w ) ok 719 - caller() in natively compiled sub returns correct name when it contains \x77 ( w ) ok 720 - %DB::sub entry for natively compiled sub is correct when it contains \x77 ( w ) ok 721 - stash name for renamed closure is correct when it contains \x78 ( x ) ok 722 - caller() in renamed closure returns correct name when it contains \x78 ( x ) ok 723 - %DB::sub entry for renamed closure is correct when it contains \x78 ( x ) ok 724 - stash name for natively compiled sub is correct when it contains \x78 ( x ) ok 725 - caller() in natively compiled sub returns correct name when it contains \x78 ( x ) ok 726 - %DB::sub entry for natively compiled sub is correct when it contains \x78 ( x ) ok 727 - stash name for renamed closure is correct when it contains \x79 ( y ) ok 728 - caller() in renamed closure returns correct name when it contains \x79 ( y ) ok 729 - %DB::sub entry for renamed closure is correct when it contains \x79 ( y ) ok 730 - stash name for natively compiled sub is correct when it contains \x79 ( y ) ok 731 - caller() in natively compiled sub returns correct name when it contains \x79 ( y ) ok 732 - %DB::sub entry for natively compiled sub is correct when it contains \x79 ( y ) ok 733 - stash name for renamed closure is correct when it contains \x7A ( z ) ok 734 - caller() in renamed closure returns correct name when it contains \x7A ( z ) ok 735 - %DB::sub entry for renamed closure is correct when it contains \x7A ( z ) ok 736 - stash name for natively compiled sub is correct when it contains \x7A ( z ) ok 737 - caller() in natively compiled sub returns correct name when it contains \x7A ( z ) ok 738 - %DB::sub entry for natively compiled sub is correct when it contains \x7A ( z ) ok 739 - stash name for renamed closure is correct when it contains \x7B ( { ) ok 740 - caller() in renamed closure returns correct name when it contains \x7B ( { ) ok 741 - %DB::sub entry for renamed closure is correct when it contains \x7B ( { ) ok 742 - stash name for natively compiled sub is correct when it contains \x7B ( { ) ok 743 - caller() in natively compiled sub returns correct name when it contains \x7B ( { ) ok 744 - %DB::sub entry for natively compiled sub is correct when it contains \x7B ( { ) ok 745 - stash name for renamed closure is correct when it contains \x7C ( | ) ok 746 - caller() in renamed closure returns correct name when it contains \x7C ( | ) ok 747 - %DB::sub entry for renamed closure is correct when it contains \x7C ( | ) ok 748 - stash name for natively compiled sub is correct when it contains \x7C ( | ) ok 749 - caller() in natively compiled sub returns correct name when it contains \x7C ( | ) ok 750 - %DB::sub entry for natively compiled sub is correct when it contains \x7C ( | ) ok 751 - stash name for renamed closure is correct when it contains \x7D ( } ) ok 752 - caller() in renamed closure returns correct name when it contains \x7D ( } ) ok 753 - %DB::sub entry for renamed closure is correct when it contains \x7D ( } ) ok 754 - stash name for natively compiled sub is correct when it contains \x7D ( } ) ok 755 - caller() in natively compiled sub returns correct name when it contains \x7D ( } ) ok 756 - %DB::sub entry for natively compiled sub is correct when it contains \x7D ( } ) ok 757 - stash name for renamed closure is correct when it contains \x7E ( ~ ) ok 758 - caller() in renamed closure returns correct name when it contains \x7E ( ~ ) ok 759 - %DB::sub entry for renamed closure is correct when it contains \x7E ( ~ ) ok 760 - stash name for natively compiled sub is correct when it contains \x7E ( ~ ) ok 761 - caller() in natively compiled sub returns correct name when it contains \x7E ( ~ ) ok 762 - %DB::sub entry for natively compiled sub is correct when it contains \x7E ( ~ ) ok 763 - stash name for renamed closure is correct when it contains \x7F ( \177 ) ok 764 - caller() in renamed closure returns correct name when it contains \x7F ( \177 ) ok 765 - %DB::sub entry for renamed closure is correct when it contains \x7F ( \177 ) ok 766 - stash name for natively compiled sub is correct when it contains \x7F ( \177 ) ok 767 - caller() in natively compiled sub returns correct name when it contains \x7F ( \177 ) ok 768 - %DB::sub entry for natively compiled sub is correct when it contains \x7F ( \177 ) ok 769 - stash name for renamed closure is correct when it contains \x80 ( \200 ) ok 770 - caller() in renamed closure returns correct name when it contains \x80 ( \200 ) ok 771 - %DB::sub entry for renamed closure is correct when it contains \x80 ( \200 ) ok 772 - stash name for natively compiled sub is correct when it contains \x80 ( \200 ) ok 773 - caller() in natively compiled sub returns correct name when it contains \x80 ( \200 ) ok 774 - %DB::sub entry for natively compiled sub is correct when it contains \x80 ( \200 ) ok 775 - stash name for renamed closure is correct when it contains \x81 ( \201 ) ok 776 - caller() in renamed closure returns correct name when it contains \x81 ( \201 ) ok 777 - %DB::sub entry for renamed closure is correct when it contains \x81 ( \201 ) ok 778 - stash name for natively compiled sub is correct when it contains \x81 ( \201 ) ok 779 - caller() in natively compiled sub returns correct name when it contains \x81 ( \201 ) ok 780 - %DB::sub entry for natively compiled sub is correct when it contains \x81 ( \201 ) ok 781 - stash name for renamed closure is correct when it contains \x82 ( \202 ) ok 782 - caller() in renamed closure returns correct name when it contains \x82 ( \202 ) ok 783 - %DB::sub entry for renamed closure is correct when it contains \x82 ( \202 ) ok 784 - stash name for natively compiled sub is correct when it contains \x82 ( \202 ) ok 785 - caller() in natively compiled sub returns correct name when it contains \x82 ( \202 ) ok 786 - %DB::sub entry for natively compiled sub is correct when it contains \x82 ( \202 ) ok 787 - stash name for renamed closure is correct when it contains \x83 ( \203 ) ok 788 - caller() in renamed closure returns correct name when it contains \x83 ( \203 ) ok 789 - %DB::sub entry for renamed closure is correct when it contains \x83 ( \203 ) ok 790 - stash name for natively compiled sub is correct when it contains \x83 ( \203 ) ok 791 - caller() in natively compiled sub returns correct name when it contains \x83 ( \203 ) ok 792 - %DB::sub entry for natively compiled sub is correct when it contains \x83 ( \203 ) ok 793 - stash name for renamed closure is correct when it contains \x84 ( \204 ) ok 794 - caller() in renamed closure returns correct name when it contains \x84 ( \204 ) ok 795 - %DB::sub entry for renamed closure is correct when it contains \x84 ( \204 ) ok 796 - stash name for natively compiled sub is correct when it contains \x84 ( \204 ) ok 797 - caller() in natively compiled sub returns correct name when it contains \x84 ( \204 ) ok 798 - %DB::sub entry for natively compiled sub is correct when it contains \x84 ( \204 ) ok 799 - stash name for renamed closure is correct when it contains \x85 ( \205 ) ok 800 - caller() in renamed closure returns correct name when it contains \x85 ( \205 ) ok 801 - %DB::sub entry for renamed closure is correct when it contains \x85 ( \205 ) ok 802 - stash name for natively compiled sub is correct when it contains \x85 ( \205 ) ok 803 - caller() in natively compiled sub returns correct name when it contains \x85 ( \205 ) ok 804 - %DB::sub entry for natively compiled sub is correct when it contains \x85 ( \205 ) ok 805 - stash name for renamed closure is correct when it contains \x86 ( \206 ) ok 806 - caller() in renamed closure returns correct name when it contains \x86 ( \206 ) ok 807 - %DB::sub entry for renamed closure is correct when it contains \x86 ( \206 ) ok 808 - stash name for natively compiled sub is correct when it contains \x86 ( \206 ) ok 809 - caller() in natively compiled sub returns correct name when it contains \x86 ( \206 ) ok 810 - %DB::sub entry for natively compiled sub is correct when it contains \x86 ( \206 ) ok 811 - stash name for renamed closure is correct when it contains \x87 ( \207 ) ok 812 - caller() in renamed closure returns correct name when it contains \x87 ( \207 ) ok 813 - %DB::sub entry for renamed closure is correct when it contains \x87 ( \207 ) ok 814 - stash name for natively compiled sub is correct when it contains \x87 ( \207 ) ok 815 - caller() in natively compiled sub returns correct name when it contains \x87 ( \207 ) ok 816 - %DB::sub entry for natively compiled sub is correct when it contains \x87 ( \207 ) ok 817 - stash name for renamed closure is correct when it contains \x88 ( \210 ) ok 818 - caller() in renamed closure returns correct name when it contains \x88 ( \210 ) ok 819 - %DB::sub entry for renamed closure is correct when it contains \x88 ( \210 ) ok 820 - stash name for natively compiled sub is correct when it contains \x88 ( \210 ) ok 821 - caller() in natively compiled sub returns correct name when it contains \x88 ( \210 ) ok 822 - %DB::sub entry for natively compiled sub is correct when it contains \x88 ( \210 ) ok 823 - stash name for renamed closure is correct when it contains \x89 ( \211 ) ok 824 - caller() in renamed closure returns correct name when it contains \x89 ( \211 ) ok 825 - %DB::sub entry for renamed closure is correct when it contains \x89 ( \211 ) ok 826 - stash name for natively compiled sub is correct when it contains \x89 ( \211 ) ok 827 - caller() in natively compiled sub returns correct name when it contains \x89 ( \211 ) ok 828 - %DB::sub entry for natively compiled sub is correct when it contains \x89 ( \211 ) ok 829 - stash name for renamed closure is correct when it contains \x8A ( \212 ) ok 830 - caller() in renamed closure returns correct name when it contains \x8A ( \212 ) ok 831 - %DB::sub entry for renamed closure is correct when it contains \x8A ( \212 ) ok 832 - stash name for natively compiled sub is correct when it contains \x8A ( \212 ) ok 833 - caller() in natively compiled sub returns correct name when it contains \x8A ( \212 ) ok 834 - %DB::sub entry for natively compiled sub is correct when it contains \x8A ( \212 ) ok 835 - stash name for renamed closure is correct when it contains \x8B ( \213 ) ok 836 - caller() in renamed closure returns correct name when it contains \x8B ( \213 ) ok 837 - %DB::sub entry for renamed closure is correct when it contains \x8B ( \213 ) ok 838 - stash name for natively compiled sub is correct when it contains \x8B ( \213 ) ok 839 - caller() in natively compiled sub returns correct name when it contains \x8B ( \213 ) ok 840 - %DB::sub entry for natively compiled sub is correct when it contains \x8B ( \213 ) ok 841 - stash name for renamed closure is correct when it contains \x8C ( \214 ) ok 842 - caller() in renamed closure returns correct name when it contains \x8C ( \214 ) ok 843 - %DB::sub entry for renamed closure is correct when it contains \x8C ( \214 ) ok 844 - stash name for natively compiled sub is correct when it contains \x8C ( \214 ) ok 845 - caller() in natively compiled sub returns correct name when it contains \x8C ( \214 ) ok 846 - %DB::sub entry for natively compiled sub is correct when it contains \x8C ( \214 ) ok 847 - stash name for renamed closure is correct when it contains \x8D ( \215 ) ok 848 - caller() in renamed closure returns correct name when it contains \x8D ( \215 ) ok 849 - %DB::sub entry for renamed closure is correct when it contains \x8D ( \215 ) ok 850 - stash name for natively compiled sub is correct when it contains \x8D ( \215 ) ok 851 - caller() in natively compiled sub returns correct name when it contains \x8D ( \215 ) ok 852 - %DB::sub entry for natively compiled sub is correct when it contains \x8D ( \215 ) ok 853 - stash name for renamed closure is correct when it contains \x8E ( \216 ) ok 854 - caller() in renamed closure returns correct name when it contains \x8E ( \216 ) ok 855 - %DB::sub entry for renamed closure is correct when it contains \x8E ( \216 ) ok 856 - stash name for natively compiled sub is correct when it contains \x8E ( \216 ) ok 857 - caller() in natively compiled sub returns correct name when it contains \x8E ( \216 ) ok 858 - %DB::sub entry for natively compiled sub is correct when it contains \x8E ( \216 ) ok 859 - stash name for renamed closure is correct when it contains \x8F ( \217 ) ok 860 - caller() in renamed closure returns correct name when it contains \x8F ( \217 ) ok 861 - %DB::sub entry for renamed closure is correct when it contains \x8F ( \217 ) ok 862 - stash name for natively compiled sub is correct when it contains \x8F ( \217 ) ok 863 - caller() in natively compiled sub returns correct name when it contains \x8F ( \217 ) ok 864 - %DB::sub entry for natively compiled sub is correct when it contains \x8F ( \217 ) ok 865 - stash name for renamed closure is correct when it contains \x90 ( \220 ) ok 866 - caller() in renamed closure returns correct name when it contains \x90 ( \220 ) ok 867 - %DB::sub entry for renamed closure is correct when it contains \x90 ( \220 ) ok 868 - stash name for natively compiled sub is correct when it contains \x90 ( \220 ) ok 869 - caller() in natively compiled sub returns correct name when it contains \x90 ( \220 ) ok 870 - %DB::sub entry for natively compiled sub is correct when it contains \x90 ( \220 ) ok 871 - stash name for renamed closure is correct when it contains \x91 ( \221 ) ok 872 - caller() in renamed closure returns correct name when it contains \x91 ( \221 ) ok 873 - %DB::sub entry for renamed closure is correct when it contains \x91 ( \221 ) ok 874 - stash name for natively compiled sub is correct when it contains \x91 ( \221 ) ok 875 - caller() in natively compiled sub returns correct name when it contains \x91 ( \221 ) ok 876 - %DB::sub entry for natively compiled sub is correct when it contains \x91 ( \221 ) ok 877 - stash name for renamed closure is correct when it contains \x92 ( \222 ) ok 878 - caller() in renamed closure returns correct name when it contains \x92 ( \222 ) ok 879 - %DB::sub entry for renamed closure is correct when it contains \x92 ( \222 ) ok 880 - stash name for natively compiled sub is correct when it contains \x92 ( \222 ) ok 881 - caller() in natively compiled sub returns correct name when it contains \x92 ( \222 ) ok 882 - %DB::sub entry for natively compiled sub is correct when it contains \x92 ( \222 ) ok 883 - stash name for renamed closure is correct when it contains \x93 ( \223 ) ok 884 - caller() in renamed closure returns correct name when it contains \x93 ( \223 ) ok 885 - %DB::sub entry for renamed closure is correct when it contains \x93 ( \223 ) ok 886 - stash name for natively compiled sub is correct when it contains \x93 ( \223 ) ok 887 - caller() in natively compiled sub returns correct name when it contains \x93 ( \223 ) ok 888 - %DB::sub entry for natively compiled sub is correct when it contains \x93 ( \223 ) ok 889 - stash name for renamed closure is correct when it contains \x94 ( \224 ) ok 890 - caller() in renamed closure returns correct name when it contains \x94 ( \224 ) ok 891 - %DB::sub entry for renamed closure is correct when it contains \x94 ( \224 ) ok 892 - stash name for natively compiled sub is correct when it contains \x94 ( \224 ) ok 893 - caller() in natively compiled sub returns correct name when it contains \x94 ( \224 ) ok 894 - %DB::sub entry for natively compiled sub is correct when it contains \x94 ( \224 ) ok 895 - stash name for renamed closure is correct when it contains \x95 ( \225 ) ok 896 - caller() in renamed closure returns correct name when it contains \x95 ( \225 ) ok 897 - %DB::sub entry for renamed closure is correct when it contains \x95 ( \225 ) ok 898 - stash name for natively compiled sub is correct when it contains \x95 ( \225 ) ok 899 - caller() in natively compiled sub returns correct name when it contains \x95 ( \225 ) ok 900 - %DB::sub entry for natively compiled sub is correct when it contains \x95 ( \225 ) ok 901 - stash name for renamed closure is correct when it contains \x96 ( \226 ) ok 902 - caller() in renamed closure returns correct name when it contains \x96 ( \226 ) ok 903 - %DB::sub entry for renamed closure is correct when it contains \x96 ( \226 ) ok 904 - stash name for natively compiled sub is correct when it contains \x96 ( \226 ) ok 905 - caller() in natively compiled sub returns correct name when it contains \x96 ( \226 ) ok 906 - %DB::sub entry for natively compiled sub is correct when it contains \x96 ( \226 ) ok 907 - stash name for renamed closure is correct when it contains \x97 ( \227 ) ok 908 - caller() in renamed closure returns correct name when it contains \x97 ( \227 ) ok 909 - %DB::sub entry for renamed closure is correct when it contains \x97 ( \227 ) ok 910 - stash name for natively compiled sub is correct when it contains \x97 ( \227 ) ok 911 - caller() in natively compiled sub returns correct name when it contains \x97 ( \227 ) ok 912 - %DB::sub entry for natively compiled sub is correct when it contains \x97 ( \227 ) ok 913 - stash name for renamed closure is correct when it contains \x98 ( \230 ) ok 914 - caller() in renamed closure returns correct name when it contains \x98 ( \230 ) ok 915 - %DB::sub entry for renamed closure is correct when it contains \x98 ( \230 ) ok 916 - stash name for natively compiled sub is correct when it contains \x98 ( \230 ) ok 917 - caller() in natively compiled sub returns correct name when it contains \x98 ( \230 ) ok 918 - %DB::sub entry for natively compiled sub is correct when it contains \x98 ( \230 ) ok 919 - stash name for renamed closure is correct when it contains \x99 ( \231 ) ok 920 - caller() in renamed closure returns correct name when it contains \x99 ( \231 ) ok 921 - %DB::sub entry for renamed closure is correct when it contains \x99 ( \231 ) ok 922 - stash name for natively compiled sub is correct when it contains \x99 ( \231 ) ok 923 - caller() in natively compiled sub returns correct name when it contains \x99 ( \231 ) ok 924 - %DB::sub entry for natively compiled sub is correct when it contains \x99 ( \231 ) ok 925 - stash name for renamed closure is correct when it contains \x9A ( \232 ) ok 926 - caller() in renamed closure returns correct name when it contains \x9A ( \232 ) ok 927 - %DB::sub entry for renamed closure is correct when it contains \x9A ( \232 ) ok 928 - stash name for natively compiled sub is correct when it contains \x9A ( \232 ) ok 929 - caller() in natively compiled sub returns correct name when it contains \x9A ( \232 ) ok 930 - %DB::sub entry for natively compiled sub is correct when it contains \x9A ( \232 ) ok 931 - stash name for renamed closure is correct when it contains \x9B ( \233 ) ok 932 - caller() in renamed closure returns correct name when it contains \x9B ( \233 ) ok 933 - %DB::sub entry for renamed closure is correct when it contains \x9B ( \233 ) ok 934 - stash name for natively compiled sub is correct when it contains \x9B ( \233 ) ok 935 - caller() in natively compiled sub returns correct name when it contains \x9B ( \233 ) ok 936 - %DB::sub entry for natively compiled sub is correct when it contains \x9B ( \233 ) ok 937 - stash name for renamed closure is correct when it contains \x9C ( \234 ) ok 938 - caller() in renamed closure returns correct name when it contains \x9C ( \234 ) ok 939 - %DB::sub entry for renamed closure is correct when it contains \x9C ( \234 ) ok 940 - stash name for natively compiled sub is correct when it contains \x9C ( \234 ) ok 941 - caller() in natively compiled sub returns correct name when it contains \x9C ( \234 ) ok 942 - %DB::sub entry for natively compiled sub is correct when it contains \x9C ( \234 ) ok 943 - stash name for renamed closure is correct when it contains \x9D ( \235 ) ok 944 - caller() in renamed closure returns correct name when it contains \x9D ( \235 ) ok 945 - %DB::sub entry for renamed closure is correct when it contains \x9D ( \235 ) ok 946 - stash name for natively compiled sub is correct when it contains \x9D ( \235 ) ok 947 - caller() in natively compiled sub returns correct name when it contains \x9D ( \235 ) ok 948 - %DB::sub entry for natively compiled sub is correct when it contains \x9D ( \235 ) ok 949 - stash name for renamed closure is correct when it contains \x9E ( \236 ) ok 950 - caller() in renamed closure returns correct name when it contains \x9E ( \236 ) ok 951 - %DB::sub entry for renamed closure is correct when it contains \x9E ( \236 ) ok 952 - stash name for natively compiled sub is correct when it contains \x9E ( \236 ) ok 953 - caller() in natively compiled sub returns correct name when it contains \x9E ( \236 ) ok 954 - %DB::sub entry for natively compiled sub is correct when it contains \x9E ( \236 ) ok 955 - stash name for renamed closure is correct when it contains \x9F ( \237 ) ok 956 - caller() in renamed closure returns correct name when it contains \x9F ( \237 ) ok 957 - %DB::sub entry for renamed closure is correct when it contains \x9F ( \237 ) ok 958 - stash name for natively compiled sub is correct when it contains \x9F ( \237 ) ok 959 - caller() in natively compiled sub returns correct name when it contains \x9F ( \237 ) ok 960 - %DB::sub entry for natively compiled sub is correct when it contains \x9F ( \237 ) ok 961 - stash name for renamed closure is correct when it contains \xA0 ( \240 ) ok 962 - caller() in renamed closure returns correct name when it contains \xA0 ( \240 ) ok 963 - %DB::sub entry for renamed closure is correct when it contains \xA0 ( \240 ) ok 964 - stash name for natively compiled sub is correct when it contains \xA0 ( \240 ) ok 965 - caller() in natively compiled sub returns correct name when it contains \xA0 ( \240 ) ok 966 - %DB::sub entry for natively compiled sub is correct when it contains \xA0 ( \240 ) ok 967 - stash name for renamed closure is correct when it contains \xA1 ( \241 ) ok 968 - caller() in renamed closure returns correct name when it contains \xA1 ( \241 ) ok 969 - %DB::sub entry for renamed closure is correct when it contains \xA1 ( \241 ) ok 970 - stash name for natively compiled sub is correct when it contains \xA1 ( \241 ) ok 971 - caller() in natively compiled sub returns correct name when it contains \xA1 ( \241 ) ok 972 - %DB::sub entry for natively compiled sub is correct when it contains \xA1 ( \241 ) ok 973 - stash name for renamed closure is correct when it contains \xA2 ( \242 ) ok 974 - caller() in renamed closure returns correct name when it contains \xA2 ( \242 ) ok 975 - %DB::sub entry for renamed closure is correct when it contains \xA2 ( \242 ) ok 976 - stash name for natively compiled sub is correct when it contains \xA2 ( \242 ) ok 977 - caller() in natively compiled sub returns correct name when it contains \xA2 ( \242 ) ok 978 - %DB::sub entry for natively compiled sub is correct when it contains \xA2 ( \242 ) ok 979 - stash name for renamed closure is correct when it contains \xA3 ( \243 ) ok 980 - caller() in renamed closure returns correct name when it contains \xA3 ( \243 ) ok 981 - %DB::sub entry for renamed closure is correct when it contains \xA3 ( \243 ) ok 982 - stash name for natively compiled sub is correct when it contains \xA3 ( \243 ) ok 983 - caller() in natively compiled sub returns correct name when it contains \xA3 ( \243 ) ok 984 - %DB::sub entry for natively compiled sub is correct when it contains \xA3 ( \243 ) ok 985 - stash name for renamed closure is correct when it contains \xA4 ( \244 ) ok 986 - caller() in renamed closure returns correct name when it contains \xA4 ( \244 ) ok 987 - %DB::sub entry for renamed closure is correct when it contains \xA4 ( \244 ) ok 988 - stash name for natively compiled sub is correct when it contains \xA4 ( \244 ) ok 989 - caller() in natively compiled sub returns correct name when it contains \xA4 ( \244 ) ok 990 - %DB::sub entry for natively compiled sub is correct when it contains \xA4 ( \244 ) ok 991 - stash name for renamed closure is correct when it contains \xA5 ( \245 ) ok 992 - caller() in renamed closure returns correct name when it contains \xA5 ( \245 ) ok 993 - %DB::sub entry for renamed closure is correct when it contains \xA5 ( \245 ) ok 994 - stash name for natively compiled sub is correct when it contains \xA5 ( \245 ) ok 995 - caller() in natively compiled sub returns correct name when it contains \xA5 ( \245 ) ok 996 - %DB::sub entry for natively compiled sub is correct when it contains \xA5 ( \245 ) ok 997 - stash name for renamed closure is correct when it contains \xA6 ( \246 ) ok 998 - caller() in renamed closure returns correct name when it contains \xA6 ( \246 ) ok 999 - %DB::sub entry for renamed closure is correct when it contains \xA6 ( \246 ) ok 1000 - stash name for natively compiled sub is correct when it contains \xA6 ( \246 ) ok 1001 - caller() in natively compiled sub returns correct name when it contains \xA6 ( \246 ) ok 1002 - %DB::sub entry for natively compiled sub is correct when it contains \xA6 ( \246 ) ok 1003 - stash name for renamed closure is correct when it contains \xA7 ( \247 ) ok 1004 - caller() in renamed closure returns correct name when it contains \xA7 ( \247 ) ok 1005 - %DB::sub entry for renamed closure is correct when it contains \xA7 ( \247 ) ok 1006 - stash name for natively compiled sub is correct when it contains \xA7 ( \247 ) ok 1007 - caller() in natively compiled sub returns correct name when it contains \xA7 ( \247 ) ok 1008 - %DB::sub entry for natively compiled sub is correct when it contains \xA7 ( \247 ) ok 1009 - stash name for renamed closure is correct when it contains \xA8 ( \250 ) ok 1010 - caller() in renamed closure returns correct name when it contains \xA8 ( \250 ) ok 1011 - %DB::sub entry for renamed closure is correct when it contains \xA8 ( \250 ) ok 1012 - stash name for natively compiled sub is correct when it contains \xA8 ( \250 ) ok 1013 - caller() in natively compiled sub returns correct name when it contains \xA8 ( \250 ) ok 1014 - %DB::sub entry for natively compiled sub is correct when it contains \xA8 ( \250 ) ok 1015 - stash name for renamed closure is correct when it contains \xA9 ( \251 ) ok 1016 - caller() in renamed closure returns correct name when it contains \xA9 ( \251 ) ok 1017 - %DB::sub entry for renamed closure is correct when it contains \xA9 ( \251 ) ok 1018 - stash name for natively compiled sub is correct when it contains \xA9 ( \251 ) ok 1019 - caller() in natively compiled sub returns correct name when it contains \xA9 ( \251 ) ok 1020 - %DB::sub entry for natively compiled sub is correct when it contains \xA9 ( \251 ) ok 1021 - stash name for renamed closure is correct when it contains \xAA ( \252 ) ok 1022 - caller() in renamed closure returns correct name when it contains \xAA ( \252 ) ok 1023 - %DB::sub entry for renamed closure is correct when it contains \xAA ( \252 ) ok 1024 - stash name for natively compiled sub is correct when it contains \xAA ( \252 ) ok 1025 - caller() in natively compiled sub returns correct name when it contains \xAA ( \252 ) ok 1026 - %DB::sub entry for natively compiled sub is correct when it contains \xAA ( \252 ) ok 1027 - stash name for renamed closure is correct when it contains \xAB ( \253 ) ok 1028 - caller() in renamed closure returns correct name when it contains \xAB ( \253 ) ok 1029 - %DB::sub entry for renamed closure is correct when it contains \xAB ( \253 ) ok 1030 - stash name for natively compiled sub is correct when it contains \xAB ( \253 ) ok 1031 - caller() in natively compiled sub returns correct name when it contains \xAB ( \253 ) ok 1032 - %DB::sub entry for natively compiled sub is correct when it contains \xAB ( \253 ) ok 1033 - stash name for renamed closure is correct when it contains \xAC ( \254 ) ok 1034 - caller() in renamed closure returns correct name when it contains \xAC ( \254 ) ok 1035 - %DB::sub entry for renamed closure is correct when it contains \xAC ( \254 ) ok 1036 - stash name for natively compiled sub is correct when it contains \xAC ( \254 ) ok 1037 - caller() in natively compiled sub returns correct name when it contains \xAC ( \254 ) ok 1038 - %DB::sub entry for natively compiled sub is correct when it contains \xAC ( \254 ) ok 1039 - stash name for renamed closure is correct when it contains \xAD ( \255 ) ok 1040 - caller() in renamed closure returns correct name when it contains \xAD ( \255 ) ok 1041 - %DB::sub entry for renamed closure is correct when it contains \xAD ( \255 ) ok 1042 - stash name for natively compiled sub is correct when it contains \xAD ( \255 ) ok 1043 - caller() in natively compiled sub returns correct name when it contains \xAD ( \255 ) ok 1044 - %DB::sub entry for natively compiled sub is correct when it contains \xAD ( \255 ) ok 1045 - stash name for renamed closure is correct when it contains \xAE ( \256 ) ok 1046 - caller() in renamed closure returns correct name when it contains \xAE ( \256 ) ok 1047 - %DB::sub entry for renamed closure is correct when it contains \xAE ( \256 ) ok 1048 - stash name for natively compiled sub is correct when it contains \xAE ( \256 ) ok 1049 - caller() in natively compiled sub returns correct name when it contains \xAE ( \256 ) ok 1050 - %DB::sub entry for natively compiled sub is correct when it contains \xAE ( \256 ) ok 1051 - stash name for renamed closure is correct when it contains \xAF ( \257 ) ok 1052 - caller() in renamed closure returns correct name when it contains \xAF ( \257 ) ok 1053 - %DB::sub entry for renamed closure is correct when it contains \xAF ( \257 ) ok 1054 - stash name for natively compiled sub is correct when it contains \xAF ( \257 ) ok 1055 - caller() in natively compiled sub returns correct name when it contains \xAF ( \257 ) ok 1056 - %DB::sub entry for natively compiled sub is correct when it contains \xAF ( \257 ) ok 1057 - stash name for renamed closure is correct when it contains \xB0 ( \260 ) ok 1058 - caller() in renamed closure returns correct name when it contains \xB0 ( \260 ) ok 1059 - %DB::sub entry for renamed closure is correct when it contains \xB0 ( \260 ) ok 1060 - stash name for natively compiled sub is correct when it contains \xB0 ( \260 ) ok 1061 - caller() in natively compiled sub returns correct name when it contains \xB0 ( \260 ) ok 1062 - %DB::sub entry for natively compiled sub is correct when it contains \xB0 ( \260 ) ok 1063 - stash name for renamed closure is correct when it contains \xB1 ( \261 ) ok 1064 - caller() in renamed closure returns correct name when it contains \xB1 ( \261 ) ok 1065 - %DB::sub entry for renamed closure is correct when it contains \xB1 ( \261 ) ok 1066 - stash name for natively compiled sub is correct when it contains \xB1 ( \261 ) ok 1067 - caller() in natively compiled sub returns correct name when it contains \xB1 ( \261 ) ok 1068 - %DB::sub entry for natively compiled sub is correct when it contains \xB1 ( \261 ) ok 1069 - stash name for renamed closure is correct when it contains \xB2 ( \262 ) ok 1070 - caller() in renamed closure returns correct name when it contains \xB2 ( \262 ) ok 1071 - %DB::sub entry for renamed closure is correct when it contains \xB2 ( \262 ) ok 1072 - stash name for natively compiled sub is correct when it contains \xB2 ( \262 ) ok 1073 - caller() in natively compiled sub returns correct name when it contains \xB2 ( \262 ) ok 1074 - %DB::sub entry for natively compiled sub is correct when it contains \xB2 ( \262 ) ok 1075 - stash name for renamed closure is correct when it contains \xB3 ( \263 ) ok 1076 - caller() in renamed closure returns correct name when it contains \xB3 ( \263 ) ok 1077 - %DB::sub entry for renamed closure is correct when it contains \xB3 ( \263 ) ok 1078 - stash name for natively compiled sub is correct when it contains \xB3 ( \263 ) ok 1079 - caller() in natively compiled sub returns correct name when it contains \xB3 ( \263 ) ok 1080 - %DB::sub entry for natively compiled sub is correct when it contains \xB3 ( \263 ) ok 1081 - stash name for renamed closure is correct when it contains \xB4 ( \264 ) ok 1082 - caller() in renamed closure returns correct name when it contains \xB4 ( \264 ) ok 1083 - %DB::sub entry for renamed closure is correct when it contains \xB4 ( \264 ) ok 1084 - stash name for natively compiled sub is correct when it contains \xB4 ( \264 ) ok 1085 - caller() in natively compiled sub returns correct name when it contains \xB4 ( \264 ) ok 1086 - %DB::sub entry for natively compiled sub is correct when it contains \xB4 ( \264 ) ok 1087 - stash name for renamed closure is correct when it contains \xB5 ( \265 ) ok 1088 - caller() in renamed closure returns correct name when it contains \xB5 ( \265 ) ok 1089 - %DB::sub entry for renamed closure is correct when it contains \xB5 ( \265 ) ok 1090 - stash name for natively compiled sub is correct when it contains \xB5 ( \265 ) ok 1091 - caller() in natively compiled sub returns correct name when it contains \xB5 ( \265 ) ok 1092 - %DB::sub entry for natively compiled sub is correct when it contains \xB5 ( \265 ) ok 1093 - stash name for renamed closure is correct when it contains \xB6 ( \266 ) ok 1094 - caller() in renamed closure returns correct name when it contains \xB6 ( \266 ) ok 1095 - %DB::sub entry for renamed closure is correct when it contains \xB6 ( \266 ) ok 1096 - stash name for natively compiled sub is correct when it contains \xB6 ( \266 ) ok 1097 - caller() in natively compiled sub returns correct name when it contains \xB6 ( \266 ) ok 1098 - %DB::sub entry for natively compiled sub is correct when it contains \xB6 ( \266 ) ok 1099 - stash name for renamed closure is correct when it contains \xB7 ( \267 ) ok 1100 - caller() in renamed closure returns correct name when it contains \xB7 ( \267 ) ok 1101 - %DB::sub entry for renamed closure is correct when it contains \xB7 ( \267 ) ok 1102 - stash name for natively compiled sub is correct when it contains \xB7 ( \267 ) ok 1103 - caller() in natively compiled sub returns correct name when it contains \xB7 ( \267 ) ok 1104 - %DB::sub entry for natively compiled sub is correct when it contains \xB7 ( \267 ) ok 1105 - stash name for renamed closure is correct when it contains \xB8 ( \270 ) ok 1106 - caller() in renamed closure returns correct name when it contains \xB8 ( \270 ) ok 1107 - %DB::sub entry for renamed closure is correct when it contains \xB8 ( \270 ) ok 1108 - stash name for natively compiled sub is correct when it contains \xB8 ( \270 ) ok 1109 - caller() in natively compiled sub returns correct name when it contains \xB8 ( \270 ) ok 1110 - %DB::sub entry for natively compiled sub is correct when it contains \xB8 ( \270 ) ok 1111 - stash name for renamed closure is correct when it contains \xB9 ( \271 ) ok 1112 - caller() in renamed closure returns correct name when it contains \xB9 ( \271 ) ok 1113 - %DB::sub entry for renamed closure is correct when it contains \xB9 ( \271 ) ok 1114 - stash name for natively compiled sub is correct when it contains \xB9 ( \271 ) ok 1115 - caller() in natively compiled sub returns correct name when it contains \xB9 ( \271 ) ok 1116 - %DB::sub entry for natively compiled sub is correct when it contains \xB9 ( \271 ) ok 1117 - stash name for renamed closure is correct when it contains \xBA ( \272 ) ok 1118 - caller() in renamed closure returns correct name when it contains \xBA ( \272 ) ok 1119 - %DB::sub entry for renamed closure is correct when it contains \xBA ( \272 ) ok 1120 - stash name for natively compiled sub is correct when it contains \xBA ( \272 ) ok 1121 - caller() in natively compiled sub returns correct name when it contains \xBA ( \272 ) ok 1122 - %DB::sub entry for natively compiled sub is correct when it contains \xBA ( \272 ) ok 1123 - stash name for renamed closure is correct when it contains \xBB ( \273 ) ok 1124 - caller() in renamed closure returns correct name when it contains \xBB ( \273 ) ok 1125 - %DB::sub entry for renamed closure is correct when it contains \xBB ( \273 ) ok 1126 - stash name for natively compiled sub is correct when it contains \xBB ( \273 ) ok 1127 - caller() in natively compiled sub returns correct name when it contains \xBB ( \273 ) ok 1128 - %DB::sub entry for natively compiled sub is correct when it contains \xBB ( \273 ) ok 1129 - stash name for renamed closure is correct when it contains \xBC ( \274 ) ok 1130 - caller() in renamed closure returns correct name when it contains \xBC ( \274 ) ok 1131 - %DB::sub entry for renamed closure is correct when it contains \xBC ( \274 ) ok 1132 - stash name for natively compiled sub is correct when it contains \xBC ( \274 ) ok 1133 - caller() in natively compiled sub returns correct name when it contains \xBC ( \274 ) ok 1134 - %DB::sub entry for natively compiled sub is correct when it contains \xBC ( \274 ) ok 1135 - stash name for renamed closure is correct when it contains \xBD ( \275 ) ok 1136 - caller() in renamed closure returns correct name when it contains \xBD ( \275 ) ok 1137 - %DB::sub entry for renamed closure is correct when it contains \xBD ( \275 ) ok 1138 - stash name for natively compiled sub is correct when it contains \xBD ( \275 ) ok 1139 - caller() in natively compiled sub returns correct name when it contains \xBD ( \275 ) ok 1140 - %DB::sub entry for natively compiled sub is correct when it contains \xBD ( \275 ) ok 1141 - stash name for renamed closure is correct when it contains \xBE ( \276 ) ok 1142 - caller() in renamed closure returns correct name when it contains \xBE ( \276 ) ok 1143 - %DB::sub entry for renamed closure is correct when it contains \xBE ( \276 ) ok 1144 - stash name for natively compiled sub is correct when it contains \xBE ( \276 ) ok 1145 - caller() in natively compiled sub returns correct name when it contains \xBE ( \276 ) ok 1146 - %DB::sub entry for natively compiled sub is correct when it contains \xBE ( \276 ) ok 1147 - stash name for renamed closure is correct when it contains \xBF ( \277 ) ok 1148 - caller() in renamed closure returns correct name when it contains \xBF ( \277 ) ok 1149 - %DB::sub entry for renamed closure is correct when it contains \xBF ( \277 ) ok 1150 - stash name for natively compiled sub is correct when it contains \xBF ( \277 ) ok 1151 - caller() in natively compiled sub returns correct name when it contains \xBF ( \277 ) ok 1152 - %DB::sub entry for natively compiled sub is correct when it contains \xBF ( \277 ) ok 1153 - stash name for renamed closure is correct when it contains \xC0 ( \300 ) ok 1154 - caller() in renamed closure returns correct name when it contains \xC0 ( \300 ) ok 1155 - %DB::sub entry for renamed closure is correct when it contains \xC0 ( \300 ) ok 1156 - stash name for natively compiled sub is correct when it contains \xC0 ( \300 ) ok 1157 - caller() in natively compiled sub returns correct name when it contains \xC0 ( \300 ) ok 1158 - %DB::sub entry for natively compiled sub is correct when it contains \xC0 ( \300 ) ok 1159 - stash name for renamed closure is correct when it contains \xC1 ( \301 ) ok 1160 - caller() in renamed closure returns correct name when it contains \xC1 ( \301 ) ok 1161 - %DB::sub entry for renamed closure is correct when it contains \xC1 ( \301 ) ok 1162 - stash name for natively compiled sub is correct when it contains \xC1 ( \301 ) ok 1163 - caller() in natively compiled sub returns correct name when it contains \xC1 ( \301 ) ok 1164 - %DB::sub entry for natively compiled sub is correct when it contains \xC1 ( \301 ) ok 1165 - stash name for renamed closure is correct when it contains \xC2 ( \302 ) ok 1166 - caller() in renamed closure returns correct name when it contains \xC2 ( \302 ) ok 1167 - %DB::sub entry for renamed closure is correct when it contains \xC2 ( \302 ) ok 1168 - stash name for natively compiled sub is correct when it contains \xC2 ( \302 ) ok 1169 - caller() in natively compiled sub returns correct name when it contains \xC2 ( \302 ) ok 1170 - %DB::sub entry for natively compiled sub is correct when it contains \xC2 ( \302 ) ok 1171 - stash name for renamed closure is correct when it contains \xC3 ( \303 ) ok 1172 - caller() in renamed closure returns correct name when it contains \xC3 ( \303 ) ok 1173 - %DB::sub entry for renamed closure is correct when it contains \xC3 ( \303 ) ok 1174 - stash name for natively compiled sub is correct when it contains \xC3 ( \303 ) ok 1175 - caller() in natively compiled sub returns correct name when it contains \xC3 ( \303 ) ok 1176 - %DB::sub entry for natively compiled sub is correct when it contains \xC3 ( \303 ) ok 1177 - stash name for renamed closure is correct when it contains \xC4 ( \304 ) ok 1178 - caller() in renamed closure returns correct name when it contains \xC4 ( \304 ) ok 1179 - %DB::sub entry for renamed closure is correct when it contains \xC4 ( \304 ) ok 1180 - stash name for natively compiled sub is correct when it contains \xC4 ( \304 ) ok 1181 - caller() in natively compiled sub returns correct name when it contains \xC4 ( \304 ) ok 1182 - %DB::sub entry for natively compiled sub is correct when it contains \xC4 ( \304 ) ok 1183 - stash name for renamed closure is correct when it contains \xC5 ( \305 ) ok 1184 - caller() in renamed closure returns correct name when it contains \xC5 ( \305 ) ok 1185 - %DB::sub entry for renamed closure is correct when it contains \xC5 ( \305 ) ok 1186 - stash name for natively compiled sub is correct when it contains \xC5 ( \305 ) ok 1187 - caller() in natively compiled sub returns correct name when it contains \xC5 ( \305 ) ok 1188 - %DB::sub entry for natively compiled sub is correct when it contains \xC5 ( \305 ) ok 1189 - stash name for renamed closure is correct when it contains \xC6 ( \306 ) ok 1190 - caller() in renamed closure returns correct name when it contains \xC6 ( \306 ) ok 1191 - %DB::sub entry for renamed closure is correct when it contains \xC6 ( \306 ) ok 1192 - stash name for natively compiled sub is correct when it contains \xC6 ( \306 ) ok 1193 - caller() in natively compiled sub returns correct name when it contains \xC6 ( \306 ) ok 1194 - %DB::sub entry for natively compiled sub is correct when it contains \xC6 ( \306 ) ok 1195 - stash name for renamed closure is correct when it contains \xC7 ( \307 ) ok 1196 - caller() in renamed closure returns correct name when it contains \xC7 ( \307 ) ok 1197 - %DB::sub entry for renamed closure is correct when it contains \xC7 ( \307 ) ok 1198 - stash name for natively compiled sub is correct when it contains \xC7 ( \307 ) ok 1199 - caller() in natively compiled sub returns correct name when it contains \xC7 ( \307 ) ok 1200 - %DB::sub entry for natively compiled sub is correct when it contains \xC7 ( \307 ) ok 1201 - stash name for renamed closure is correct when it contains \xC8 ( \310 ) ok 1202 - caller() in renamed closure returns correct name when it contains \xC8 ( \310 ) ok 1203 - %DB::sub entry for renamed closure is correct when it contains \xC8 ( \310 ) ok 1204 - stash name for natively compiled sub is correct when it contains \xC8 ( \310 ) ok 1205 - caller() in natively compiled sub returns correct name when it contains \xC8 ( \310 ) ok 1206 - %DB::sub entry for natively compiled sub is correct when it contains \xC8 ( \310 ) ok 1207 - stash name for renamed closure is correct when it contains \xC9 ( \311 ) ok 1208 - caller() in renamed closure returns correct name when it contains \xC9 ( \311 ) ok 1209 - %DB::sub entry for renamed closure is correct when it contains \xC9 ( \311 ) ok 1210 - stash name for natively compiled sub is correct when it contains \xC9 ( \311 ) ok 1211 - caller() in natively compiled sub returns correct name when it contains \xC9 ( \311 ) ok 1212 - %DB::sub entry for natively compiled sub is correct when it contains \xC9 ( \311 ) ok 1213 - stash name for renamed closure is correct when it contains \xCA ( \312 ) ok 1214 - caller() in renamed closure returns correct name when it contains \xCA ( \312 ) ok 1215 - %DB::sub entry for renamed closure is correct when it contains \xCA ( \312 ) ok 1216 - stash name for natively compiled sub is correct when it contains \xCA ( \312 ) ok 1217 - caller() in natively compiled sub returns correct name when it contains \xCA ( \312 ) ok 1218 - %DB::sub entry for natively compiled sub is correct when it contains \xCA ( \312 ) ok 1219 - stash name for renamed closure is correct when it contains \xCB ( \313 ) ok 1220 - caller() in renamed closure returns correct name when it contains \xCB ( \313 ) ok 1221 - %DB::sub entry for renamed closure is correct when it contains \xCB ( \313 ) ok 1222 - stash name for natively compiled sub is correct when it contains \xCB ( \313 ) ok 1223 - caller() in natively compiled sub returns correct name when it contains \xCB ( \313 ) ok 1224 - %DB::sub entry for natively compiled sub is correct when it contains \xCB ( \313 ) ok 1225 - stash name for renamed closure is correct when it contains \xCC ( \314 ) ok 1226 - caller() in renamed closure returns correct name when it contains \xCC ( \314 ) ok 1227 - %DB::sub entry for renamed closure is correct when it contains \xCC ( \314 ) ok 1228 - stash name for natively compiled sub is correct when it contains \xCC ( \314 ) ok 1229 - caller() in natively compiled sub returns correct name when it contains \xCC ( \314 ) ok 1230 - %DB::sub entry for natively compiled sub is correct when it contains \xCC ( \314 ) ok 1231 - stash name for renamed closure is correct when it contains \xCD ( \315 ) ok 1232 - caller() in renamed closure returns correct name when it contains \xCD ( \315 ) ok 1233 - %DB::sub entry for renamed closure is correct when it contains \xCD ( \315 ) ok 1234 - stash name for natively compiled sub is correct when it contains \xCD ( \315 ) ok 1235 - caller() in natively compiled sub returns correct name when it contains \xCD ( \315 ) ok 1236 - %DB::sub entry for natively compiled sub is correct when it contains \xCD ( \315 ) ok 1237 - stash name for renamed closure is correct when it contains \xCE ( \316 ) ok 1238 - caller() in renamed closure returns correct name when it contains \xCE ( \316 ) ok 1239 - %DB::sub entry for renamed closure is correct when it contains \xCE ( \316 ) ok 1240 - stash name for natively compiled sub is correct when it contains \xCE ( \316 ) ok 1241 - caller() in natively compiled sub returns correct name when it contains \xCE ( \316 ) ok 1242 - %DB::sub entry for natively compiled sub is correct when it contains \xCE ( \316 ) ok 1243 - stash name for renamed closure is correct when it contains \xCF ( \317 ) ok 1244 - caller() in renamed closure returns correct name when it contains \xCF ( \317 ) ok 1245 - %DB::sub entry for renamed closure is correct when it contains \xCF ( \317 ) ok 1246 - stash name for natively compiled sub is correct when it contains \xCF ( \317 ) ok 1247 - caller() in natively compiled sub returns correct name when it contains \xCF ( \317 ) ok 1248 - %DB::sub entry for natively compiled sub is correct when it contains \xCF ( \317 ) ok 1249 - stash name for renamed closure is correct when it contains \xD0 ( \320 ) ok 1250 - caller() in renamed closure returns correct name when it contains \xD0 ( \320 ) ok 1251 - %DB::sub entry for renamed closure is correct when it contains \xD0 ( \320 ) ok 1252 - stash name for natively compiled sub is correct when it contains \xD0 ( \320 ) ok 1253 - caller() in natively compiled sub returns correct name when it contains \xD0 ( \320 ) ok 1254 - %DB::sub entry for natively compiled sub is correct when it contains \xD0 ( \320 ) ok 1255 - stash name for renamed closure is correct when it contains \xD1 ( \321 ) ok 1256 - caller() in renamed closure returns correct name when it contains \xD1 ( \321 ) ok 1257 - %DB::sub entry for renamed closure is correct when it contains \xD1 ( \321 ) ok 1258 - stash name for natively compiled sub is correct when it contains \xD1 ( \321 ) ok 1259 - caller() in natively compiled sub returns correct name when it contains \xD1 ( \321 ) ok 1260 - %DB::sub entry for natively compiled sub is correct when it contains \xD1 ( \321 ) ok 1261 - stash name for renamed closure is correct when it contains \xD2 ( \322 ) ok 1262 - caller() in renamed closure returns correct name when it contains \xD2 ( \322 ) ok 1263 - %DB::sub entry for renamed closure is correct when it contains \xD2 ( \322 ) ok 1264 - stash name for natively compiled sub is correct when it contains \xD2 ( \322 ) ok 1265 - caller() in natively compiled sub returns correct name when it contains \xD2 ( \322 ) ok 1266 - %DB::sub entry for natively compiled sub is correct when it contains \xD2 ( \322 ) ok 1267 - stash name for renamed closure is correct when it contains \xD3 ( \323 ) ok 1268 - caller() in renamed closure returns correct name when it contains \xD3 ( \323 ) ok 1269 - %DB::sub entry for renamed closure is correct when it contains \xD3 ( \323 ) ok 1270 - stash name for natively compiled sub is correct when it contains \xD3 ( \323 ) ok 1271 - caller() in natively compiled sub returns correct name when it contains \xD3 ( \323 ) ok 1272 - %DB::sub entry for natively compiled sub is correct when it contains \xD3 ( \323 ) ok 1273 - stash name for renamed closure is correct when it contains \xD4 ( \324 ) ok 1274 - caller() in renamed closure returns correct name when it contains \xD4 ( \324 ) ok 1275 - %DB::sub entry for renamed closure is correct when it contains \xD4 ( \324 ) ok 1276 - stash name for natively compiled sub is correct when it contains \xD4 ( \324 ) ok 1277 - caller() in natively compiled sub returns correct name when it contains \xD4 ( \324 ) ok 1278 - %DB::sub entry for natively compiled sub is correct when it contains \xD4 ( \324 ) ok 1279 - stash name for renamed closure is correct when it contains \xD5 ( \325 ) ok 1280 - caller() in renamed closure returns correct name when it contains \xD5 ( \325 ) ok 1281 - %DB::sub entry for renamed closure is correct when it contains \xD5 ( \325 ) ok 1282 - stash name for natively compiled sub is correct when it contains \xD5 ( \325 ) ok 1283 - caller() in natively compiled sub returns correct name when it contains \xD5 ( \325 ) ok 1284 - %DB::sub entry for natively compiled sub is correct when it contains \xD5 ( \325 ) ok 1285 - stash name for renamed closure is correct when it contains \xD6 ( \326 ) ok 1286 - caller() in renamed closure returns correct name when it contains \xD6 ( \326 ) ok 1287 - %DB::sub entry for renamed closure is correct when it contains \xD6 ( \326 ) ok 1288 - stash name for natively compiled sub is correct when it contains \xD6 ( \326 ) ok 1289 - caller() in natively compiled sub returns correct name when it contains \xD6 ( \326 ) ok 1290 - %DB::sub entry for natively compiled sub is correct when it contains \xD6 ( \326 ) ok 1291 - stash name for renamed closure is correct when it contains \xD7 ( \327 ) ok 1292 - caller() in renamed closure returns correct name when it contains \xD7 ( \327 ) ok 1293 - %DB::sub entry for renamed closure is correct when it contains \xD7 ( \327 ) ok 1294 - stash name for natively compiled sub is correct when it contains \xD7 ( \327 ) ok 1295 - caller() in natively compiled sub returns correct name when it contains \xD7 ( \327 ) ok 1296 - %DB::sub entry for natively compiled sub is correct when it contains \xD7 ( \327 ) ok 1297 - stash name for renamed closure is correct when it contains \xD8 ( \330 ) ok 1298 - caller() in renamed closure returns correct name when it contains \xD8 ( \330 ) ok 1299 - %DB::sub entry for renamed closure is correct when it contains \xD8 ( \330 ) ok 1300 - stash name for natively compiled sub is correct when it contains \xD8 ( \330 ) ok 1301 - caller() in natively compiled sub returns correct name when it contains \xD8 ( \330 ) ok 1302 - %DB::sub entry for natively compiled sub is correct when it contains \xD8 ( \330 ) ok 1303 - stash name for renamed closure is correct when it contains \xD9 ( \331 ) ok 1304 - caller() in renamed closure returns correct name when it contains \xD9 ( \331 ) ok 1305 - %DB::sub entry for renamed closure is correct when it contains \xD9 ( \331 ) ok 1306 - stash name for natively compiled sub is correct when it contains \xD9 ( \331 ) ok 1307 - caller() in natively compiled sub returns correct name when it contains \xD9 ( \331 ) ok 1308 - %DB::sub entry for natively compiled sub is correct when it contains \xD9 ( \331 ) ok 1309 - stash name for renamed closure is correct when it contains \xDA ( \332 ) ok 1310 - caller() in renamed closure returns correct name when it contains \xDA ( \332 ) ok 1311 - %DB::sub entry for renamed closure is correct when it contains \xDA ( \332 ) ok 1312 - stash name for natively compiled sub is correct when it contains \xDA ( \332 ) ok 1313 - caller() in natively compiled sub returns correct name when it contains \xDA ( \332 ) ok 1314 - %DB::sub entry for natively compiled sub is correct when it contains \xDA ( \332 ) ok 1315 - stash name for renamed closure is correct when it contains \xDB ( \333 ) ok 1316 - caller() in renamed closure returns correct name when it contains \xDB ( \333 ) ok 1317 - %DB::sub entry for renamed closure is correct when it contains \xDB ( \333 ) ok 1318 - stash name for natively compiled sub is correct when it contains \xDB ( \333 ) ok 1319 - caller() in natively compiled sub returns correct name when it contains \xDB ( \333 ) ok 1320 - %DB::sub entry for natively compiled sub is correct when it contains \xDB ( \333 ) ok 1321 - stash name for renamed closure is correct when it contains \xDC ( \334 ) ok 1322 - caller() in renamed closure returns correct name when it contains \xDC ( \334 ) ok 1323 - %DB::sub entry for renamed closure is correct when it contains \xDC ( \334 ) ok 1324 - stash name for natively compiled sub is correct when it contains \xDC ( \334 ) ok 1325 - caller() in natively compiled sub returns correct name when it contains \xDC ( \334 ) ok 1326 - %DB::sub entry for natively compiled sub is correct when it contains \xDC ( \334 ) ok 1327 - stash name for renamed closure is correct when it contains \xDD ( \335 ) ok 1328 - caller() in renamed closure returns correct name when it contains \xDD ( \335 ) ok 1329 - %DB::sub entry for renamed closure is correct when it contains \xDD ( \335 ) ok 1330 - stash name for natively compiled sub is correct when it contains \xDD ( \335 ) ok 1331 - caller() in natively compiled sub returns correct name when it contains \xDD ( \335 ) ok 1332 - %DB::sub entry for natively compiled sub is correct when it contains \xDD ( \335 ) ok 1333 - stash name for renamed closure is correct when it contains \xDE ( \336 ) ok 1334 - caller() in renamed closure returns correct name when it contains \xDE ( \336 ) ok 1335 - %DB::sub entry for renamed closure is correct when it contains \xDE ( \336 ) ok 1336 - stash name for natively compiled sub is correct when it contains \xDE ( \336 ) ok 1337 - caller() in natively compiled sub returns correct name when it contains \xDE ( \336 ) ok 1338 - %DB::sub entry for natively compiled sub is correct when it contains \xDE ( \336 ) ok 1339 - stash name for renamed closure is correct when it contains \xDF ( \337 ) ok 1340 - caller() in renamed closure returns correct name when it contains \xDF ( \337 ) ok 1341 - %DB::sub entry for renamed closure is correct when it contains \xDF ( \337 ) ok 1342 - stash name for natively compiled sub is correct when it contains \xDF ( \337 ) ok 1343 - caller() in natively compiled sub returns correct name when it contains \xDF ( \337 ) ok 1344 - %DB::sub entry for natively compiled sub is correct when it contains \xDF ( \337 ) ok 1345 - stash name for renamed closure is correct when it contains \xE0 ( \340 ) ok 1346 - caller() in renamed closure returns correct name when it contains \xE0 ( \340 ) ok 1347 - %DB::sub entry for renamed closure is correct when it contains \xE0 ( \340 ) ok 1348 - stash name for natively compiled sub is correct when it contains \xE0 ( \340 ) ok 1349 - caller() in natively compiled sub returns correct name when it contains \xE0 ( \340 ) ok 1350 - %DB::sub entry for natively compiled sub is correct when it contains \xE0 ( \340 ) ok 1351 - stash name for renamed closure is correct when it contains \xE1 ( \341 ) ok 1352 - caller() in renamed closure returns correct name when it contains \xE1 ( \341 ) ok 1353 - %DB::sub entry for renamed closure is correct when it contains \xE1 ( \341 ) ok 1354 - stash name for natively compiled sub is correct when it contains \xE1 ( \341 ) ok 1355 - caller() in natively compiled sub returns correct name when it contains \xE1 ( \341 ) ok 1356 - %DB::sub entry for natively compiled sub is correct when it contains \xE1 ( \341 ) ok 1357 - stash name for renamed closure is correct when it contains \xE2 ( \342 ) ok 1358 - caller() in renamed closure returns correct name when it contains \xE2 ( \342 ) ok 1359 - %DB::sub entry for renamed closure is correct when it contains \xE2 ( \342 ) ok 1360 - stash name for natively compiled sub is correct when it contains \xE2 ( \342 ) ok 1361 - caller() in natively compiled sub returns correct name when it contains \xE2 ( \342 ) ok 1362 - %DB::sub entry for natively compiled sub is correct when it contains \xE2 ( \342 ) ok 1363 - stash name for renamed closure is correct when it contains \xE3 ( \343 ) ok 1364 - caller() in renamed closure returns correct name when it contains \xE3 ( \343 ) ok 1365 - %DB::sub entry for renamed closure is correct when it contains \xE3 ( \343 ) ok 1366 - stash name for natively compiled sub is correct when it contains \xE3 ( \343 ) ok 1367 - caller() in natively compiled sub returns correct name when it contains \xE3 ( \343 ) ok 1368 - %DB::sub entry for natively compiled sub is correct when it contains \xE3 ( \343 ) ok 1369 - stash name for renamed closure is correct when it contains \xE4 ( \344 ) ok 1370 - caller() in renamed closure returns correct name when it contains \xE4 ( \344 ) ok 1371 - %DB::sub entry for renamed closure is correct when it contains \xE4 ( \344 ) ok 1372 - stash name for natively compiled sub is correct when it contains \xE4 ( \344 ) ok 1373 - caller() in natively compiled sub returns correct name when it contains \xE4 ( \344 ) ok 1374 - %DB::sub entry for natively compiled sub is correct when it contains \xE4 ( \344 ) ok 1375 - stash name for renamed closure is correct when it contains \xE5 ( \345 ) ok 1376 - caller() in renamed closure returns correct name when it contains \xE5 ( \345 ) ok 1377 - %DB::sub entry for renamed closure is correct when it contains \xE5 ( \345 ) ok 1378 - stash name for natively compiled sub is correct when it contains \xE5 ( \345 ) ok 1379 - caller() in natively compiled sub returns correct name when it contains \xE5 ( \345 ) ok 1380 - %DB::sub entry for natively compiled sub is correct when it contains \xE5 ( \345 ) ok 1381 - stash name for renamed closure is correct when it contains \xE6 ( \346 ) ok 1382 - caller() in renamed closure returns correct name when it contains \xE6 ( \346 ) ok 1383 - %DB::sub entry for renamed closure is correct when it contains \xE6 ( \346 ) ok 1384 - stash name for natively compiled sub is correct when it contains \xE6 ( \346 ) ok 1385 - caller() in natively compiled sub returns correct name when it contains \xE6 ( \346 ) ok 1386 - %DB::sub entry for natively compiled sub is correct when it contains \xE6 ( \346 ) ok 1387 - stash name for renamed closure is correct when it contains \xE7 ( \347 ) ok 1388 - caller() in renamed closure returns correct name when it contains \xE7 ( \347 ) ok 1389 - %DB::sub entry for renamed closure is correct when it contains \xE7 ( \347 ) ok 1390 - stash name for natively compiled sub is correct when it contains \xE7 ( \347 ) ok 1391 - caller() in natively compiled sub returns correct name when it contains \xE7 ( \347 ) ok 1392 - %DB::sub entry for natively compiled sub is correct when it contains \xE7 ( \347 ) ok 1393 - stash name for renamed closure is correct when it contains \xE8 ( \350 ) ok 1394 - caller() in renamed closure returns correct name when it contains \xE8 ( \350 ) ok 1395 - %DB::sub entry for renamed closure is correct when it contains \xE8 ( \350 ) ok 1396 - stash name for natively compiled sub is correct when it contains \xE8 ( \350 ) ok 1397 - caller() in natively compiled sub returns correct name when it contains \xE8 ( \350 ) ok 1398 - %DB::sub entry for natively compiled sub is correct when it contains \xE8 ( \350 ) ok 1399 - stash name for renamed closure is correct when it contains \xE9 ( \351 ) ok 1400 - caller() in renamed closure returns correct name when it contains \xE9 ( \351 ) ok 1401 - %DB::sub entry for renamed closure is correct when it contains \xE9 ( \351 ) ok 1402 - stash name for natively compiled sub is correct when it contains \xE9 ( \351 ) ok 1403 - caller() in natively compiled sub returns correct name when it contains \xE9 ( \351 ) ok 1404 - %DB::sub entry for natively compiled sub is correct when it contains \xE9 ( \351 ) ok 1405 - stash name for renamed closure is correct when it contains \xEA ( \352 ) ok 1406 - caller() in renamed closure returns correct name when it contains \xEA ( \352 ) ok 1407 - %DB::sub entry for renamed closure is correct when it contains \xEA ( \352 ) ok 1408 - stash name for natively compiled sub is correct when it contains \xEA ( \352 ) ok 1409 - caller() in natively compiled sub returns correct name when it contains \xEA ( \352 ) ok 1410 - %DB::sub entry for natively compiled sub is correct when it contains \xEA ( \352 ) ok 1411 - stash name for renamed closure is correct when it contains \xEB ( \353 ) ok 1412 - caller() in renamed closure returns correct name when it contains \xEB ( \353 ) ok 1413 - %DB::sub entry for renamed closure is correct when it contains \xEB ( \353 ) ok 1414 - stash name for natively compiled sub is correct when it contains \xEB ( \353 ) ok 1415 - caller() in natively compiled sub returns correct name when it contains \xEB ( \353 ) ok 1416 - %DB::sub entry for natively compiled sub is correct when it contains \xEB ( \353 ) ok 1417 - stash name for renamed closure is correct when it contains \xEC ( \354 ) ok 1418 - caller() in renamed closure returns correct name when it contains \xEC ( \354 ) ok 1419 - %DB::sub entry for renamed closure is correct when it contains \xEC ( \354 ) ok 1420 - stash name for natively compiled sub is correct when it contains \xEC ( \354 ) ok 1421 - caller() in natively compiled sub returns correct name when it contains \xEC ( \354 ) ok 1422 - %DB::sub entry for natively compiled sub is correct when it contains \xEC ( \354 ) ok 1423 - stash name for renamed closure is correct when it contains \xED ( \355 ) ok 1424 - caller() in renamed closure returns correct name when it contains \xED ( \355 ) ok 1425 - %DB::sub entry for renamed closure is correct when it contains \xED ( \355 ) ok 1426 - stash name for natively compiled sub is correct when it contains \xED ( \355 ) ok 1427 - caller() in natively compiled sub returns correct name when it contains \xED ( \355 ) ok 1428 - %DB::sub entry for natively compiled sub is correct when it contains \xED ( \355 ) ok 1429 - stash name for renamed closure is correct when it contains \xEE ( \356 ) ok 1430 - caller() in renamed closure returns correct name when it contains \xEE ( \356 ) ok 1431 - %DB::sub entry for renamed closure is correct when it contains \xEE ( \356 ) ok 1432 - stash name for natively compiled sub is correct when it contains \xEE ( \356 ) ok 1433 - caller() in natively compiled sub returns correct name when it contains \xEE ( \356 ) ok 1434 - %DB::sub entry for natively compiled sub is correct when it contains \xEE ( \356 ) ok 1435 - stash name for renamed closure is correct when it contains \xEF ( \357 ) ok 1436 - caller() in renamed closure returns correct name when it contains \xEF ( \357 ) ok 1437 - %DB::sub entry for renamed closure is correct when it contains \xEF ( \357 ) ok 1438 - stash name for natively compiled sub is correct when it contains \xEF ( \357 ) ok 1439 - caller() in natively compiled sub returns correct name when it contains \xEF ( \357 ) ok 1440 - %DB::sub entry for natively compiled sub is correct when it contains \xEF ( \357 ) ok 1441 - stash name for renamed closure is correct when it contains \xF0 ( \360 ) ok 1442 - caller() in renamed closure returns correct name when it contains \xF0 ( \360 ) ok 1443 - %DB::sub entry for renamed closure is correct when it contains \xF0 ( \360 ) ok 1444 - stash name for natively compiled sub is correct when it contains \xF0 ( \360 ) ok 1445 - caller() in natively compiled sub returns correct name when it contains \xF0 ( \360 ) ok 1446 - %DB::sub entry for natively compiled sub is correct when it contains \xF0 ( \360 ) ok 1447 - stash name for renamed closure is correct when it contains \xF1 ( \361 ) ok 1448 - caller() in renamed closure returns correct name when it contains \xF1 ( \361 ) ok 1449 - %DB::sub entry for renamed closure is correct when it contains \xF1 ( \361 ) ok 1450 - stash name for natively compiled sub is correct when it contains \xF1 ( \361 ) ok 1451 - caller() in natively compiled sub returns correct name when it contains \xF1 ( \361 ) ok 1452 - %DB::sub entry for natively compiled sub is correct when it contains \xF1 ( \361 ) ok 1453 - stash name for renamed closure is correct when it contains \xF2 ( \362 ) ok 1454 - caller() in renamed closure returns correct name when it contains \xF2 ( \362 ) ok 1455 - %DB::sub entry for renamed closure is correct when it contains \xF2 ( \362 ) ok 1456 - stash name for natively compiled sub is correct when it contains \xF2 ( \362 ) ok 1457 - caller() in natively compiled sub returns correct name when it contains \xF2 ( \362 ) ok 1458 - %DB::sub entry for natively compiled sub is correct when it contains \xF2 ( \362 ) ok 1459 - stash name for renamed closure is correct when it contains \xF3 ( \363 ) ok 1460 - caller() in renamed closure returns correct name when it contains \xF3 ( \363 ) ok 1461 - %DB::sub entry for renamed closure is correct when it contains \xF3 ( \363 ) ok 1462 - stash name for natively compiled sub is correct when it contains \xF3 ( \363 ) ok 1463 - caller() in natively compiled sub returns correct name when it contains \xF3 ( \363 ) ok 1464 - %DB::sub entry for natively compiled sub is correct when it contains \xF3 ( \363 ) ok 1465 - stash name for renamed closure is correct when it contains \xF4 ( \364 ) ok 1466 - caller() in renamed closure returns correct name when it contains \xF4 ( \364 ) ok 1467 - %DB::sub entry for renamed closure is correct when it contains \xF4 ( \364 ) ok 1468 - stash name for natively compiled sub is correct when it contains \xF4 ( \364 ) ok 1469 - caller() in natively compiled sub returns correct name when it contains \xF4 ( \364 ) ok 1470 - %DB::sub entry for natively compiled sub is correct when it contains \xF4 ( \364 ) ok 1471 - stash name for renamed closure is correct when it contains \xF5 ( \365 ) ok 1472 - caller() in renamed closure returns correct name when it contains \xF5 ( \365 ) ok 1473 - %DB::sub entry for renamed closure is correct when it contains \xF5 ( \365 ) ok 1474 - stash name for natively compiled sub is correct when it contains \xF5 ( \365 ) ok 1475 - caller() in natively compiled sub returns correct name when it contains \xF5 ( \365 ) ok 1476 - %DB::sub entry for natively compiled sub is correct when it contains \xF5 ( \365 ) ok 1477 - stash name for renamed closure is correct when it contains \xF6 ( \366 ) ok 1478 - caller() in renamed closure returns correct name when it contains \xF6 ( \366 ) ok 1479 - %DB::sub entry for renamed closure is correct when it contains \xF6 ( \366 ) ok 1480 - stash name for natively compiled sub is correct when it contains \xF6 ( \366 ) ok 1481 - caller() in natively compiled sub returns correct name when it contains \xF6 ( \366 ) ok 1482 - %DB::sub entry for natively compiled sub is correct when it contains \xF6 ( \366 ) ok 1483 - stash name for renamed closure is correct when it contains \xF7 ( \367 ) ok 1484 - caller() in renamed closure returns correct name when it contains \xF7 ( \367 ) ok 1485 - %DB::sub entry for renamed closure is correct when it contains \xF7 ( \367 ) ok 1486 - stash name for natively compiled sub is correct when it contains \xF7 ( \367 ) ok 1487 - caller() in natively compiled sub returns correct name when it contains \xF7 ( \367 ) ok 1488 - %DB::sub entry for natively compiled sub is correct when it contains \xF7 ( \367 ) ok 1489 - stash name for renamed closure is correct when it contains \xF8 ( \370 ) ok 1490 - caller() in renamed closure returns correct name when it contains \xF8 ( \370 ) ok 1491 - %DB::sub entry for renamed closure is correct when it contains \xF8 ( \370 ) ok 1492 - stash name for natively compiled sub is correct when it contains \xF8 ( \370 ) ok 1493 - caller() in natively compiled sub returns correct name when it contains \xF8 ( \370 ) ok 1494 - %DB::sub entry for natively compiled sub is correct when it contains \xF8 ( \370 ) ok 1495 - stash name for renamed closure is correct when it contains \xF9 ( \371 ) ok 1496 - caller() in renamed closure returns correct name when it contains \xF9 ( \371 ) ok 1497 - %DB::sub entry for renamed closure is correct when it contains \xF9 ( \371 ) ok 1498 - stash name for natively compiled sub is correct when it contains \xF9 ( \371 ) ok 1499 - caller() in natively compiled sub returns correct name when it contains \xF9 ( \371 ) ok 1500 - %DB::sub entry for natively compiled sub is correct when it contains \xF9 ( \371 ) ok 1501 - stash name for renamed closure is correct when it contains \xFA ( \372 ) ok 1502 - caller() in renamed closure returns correct name when it contains \xFA ( \372 ) ok 1503 - %DB::sub entry for renamed closure is correct when it contains \xFA ( \372 ) ok 1504 - stash name for natively compiled sub is correct when it contains \xFA ( \372 ) ok 1505 - caller() in natively compiled sub returns correct name when it contains \xFA ( \372 ) ok 1506 - %DB::sub entry for natively compiled sub is correct when it contains \xFA ( \372 ) ok 1507 - stash name for renamed closure is correct when it contains \xFB ( \373 ) ok 1508 - caller() in renamed closure returns correct name when it contains \xFB ( \373 ) ok 1509 - %DB::sub entry for renamed closure is correct when it contains \xFB ( \373 ) ok 1510 - stash name for natively compiled sub is correct when it contains \xFB ( \373 ) ok 1511 - caller() in natively compiled sub returns correct name when it contains \xFB ( \373 ) ok 1512 - %DB::sub entry for natively compiled sub is correct when it contains \xFB ( \373 ) ok 1513 - stash name for renamed closure is correct when it contains \xFC ( \374 ) ok 1514 - caller() in renamed closure returns correct name when it contains \xFC ( \374 ) ok 1515 - %DB::sub entry for renamed closure is correct when it contains \xFC ( \374 ) ok 1516 - stash name for natively compiled sub is correct when it contains \xFC ( \374 ) ok 1517 - caller() in natively compiled sub returns correct name when it contains \xFC ( \374 ) ok 1518 - %DB::sub entry for natively compiled sub is correct when it contains \xFC ( \374 ) ok 1519 - stash name for renamed closure is correct when it contains \xFD ( \375 ) ok 1520 - caller() in renamed closure returns correct name when it contains \xFD ( \375 ) ok 1521 - %DB::sub entry for renamed closure is correct when it contains \xFD ( \375 ) ok 1522 - stash name for natively compiled sub is correct when it contains \xFD ( \375 ) ok 1523 - caller() in natively compiled sub returns correct name when it contains \xFD ( \375 ) ok 1524 - %DB::sub entry for natively compiled sub is correct when it contains \xFD ( \375 ) ok 1525 - stash name for renamed closure is correct when it contains \xFE ( \376 ) ok 1526 - caller() in renamed closure returns correct name when it contains \xFE ( \376 ) ok 1527 - %DB::sub entry for renamed closure is correct when it contains \xFE ( \376 ) ok 1528 - stash name for natively compiled sub is correct when it contains \xFE ( \376 ) ok 1529 - caller() in natively compiled sub returns correct name when it contains \xFE ( \376 ) ok 1530 - %DB::sub entry for natively compiled sub is correct when it contains \xFE ( \376 ) ok 1531 - stash name for renamed closure is correct when it contains \xFF ( \377 ) ok 1532 - caller() in renamed closure returns correct name when it contains \xFF ( \377 ) ok 1533 - %DB::sub entry for renamed closure is correct when it contains \xFF ( \377 ) ok 1534 - stash name for natively compiled sub is correct when it contains \xFF ( \377 ) ok 1535 - caller() in natively compiled sub returns correct name when it contains \xFF ( \377 ) ok 1536 - %DB::sub entry for natively compiled sub is correct when it contains \xFF ( \377 ) ok 1537 - stash name for renamed closure is correct when it contains \x{100} ( c480 ) ok 1538 - caller() in renamed closure returns correct name when it contains \x{100} ( c480 ) ok 1539 - %DB::sub entry for renamed closure is correct when it contains \x{100} ( c480 ) ok 1540 - stash name for natively compiled sub is correct when it contains \x{100} ( c480 ) ok 1541 - caller() in natively compiled sub returns correct name when it contains \x{100} ( c480 ) ok 1542 - %DB::sub entry for natively compiled sub is correct when it contains \x{100} ( c480 ) ok 1543 - stash name for renamed closure is correct when it contains \x{498} ( d298 ) ok 1544 - caller() in renamed closure returns correct name when it contains \x{498} ( d298 ) ok 1545 - %DB::sub entry for renamed closure is correct when it contains \x{498} ( d298 ) ok 1546 - stash name for natively compiled sub is correct when it contains \x{498} ( d298 ) ok 1547 - caller() in natively compiled sub returns correct name when it contains \x{498} ( d298 ) ok 1548 - %DB::sub entry for natively compiled sub is correct when it contains \x{498} ( d298 ) ok 1549 - stash name for renamed closure is correct when it contains \x{2122} ( e284a2 ) ok 1550 - caller() in renamed closure returns correct name when it contains \x{2122} ( e284a2 ) ok 1551 - %DB::sub entry for renamed closure is correct when it contains \x{2122} ( e284a2 ) ok 1552 - stash name for natively compiled sub is correct when it contains \x{2122} ( e284a2 ) ok 1553 - caller() in natively compiled sub returns correct name when it contains \x{2122} ( e284a2 ) ok 1554 - %DB::sub entry for natively compiled sub is correct when it contains \x{2122} ( e284a2 ) ok 1555 - stash name for renamed closure is correct when it contains \x{1F4A9} ( f09f92a9 ) ok 1556 - caller() in renamed closure returns correct name when it contains \x{1F4A9} ( f09f92a9 ) ok 1557 - %DB::sub entry for renamed closure is correct when it contains \x{1F4A9} ( f09f92a9 ) ok 1558 - stash name for natively compiled sub is correct when it contains \x{1F4A9} ( f09f92a9 ) ok 1559 - caller() in natively compiled sub returns correct name when it contains \x{1F4A9} ( f09f92a9 ) ok 1560 - %DB::sub entry for natively compiled sub is correct when it contains \x{1F4A9} ( f09f92a9 ) ok t/first.t ............. 1..24 ok 1 - defined ok 2 - one more than 8 ok 3 - none match ok 4 - no args ok 5 - reference args ok 6 - use of eval ok 7 - use of die ok 8 - wantarray ok 9 - return ok 10 - return from loop ok 11 - other package ok 12 - undef active sub ok 13 - redefine self ok 14 - from active sub ok 15 - Refcount unchanged ok 16 - goto label ok 17 - goto sub ok 18 - XSUB callbacks ok 19 - XSUB callbacks ok 20 - check for code reference ok 21 - check for code reference ok 22 - check for code reference ok 23 - check for code reference ok 24 - check for code reference ok t/getmagic-once.t ..... 1..6 ok 1 ok 2 - blessed ok 3 ok 4 - reftype ok 5 ok 6 - refaddr ok t/head-tail.t ......... 1..42 ok 1 - defined ok 2 - defined ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok t/isvstring.t ......... 1..3 ok 1 - dotted num ok 2 - isvstring ok 3 - not isvstring ok t/lln.t ............... 1..19 ok 1 - '1' ok 2 - '-1' ok 3 - '+1' ok 4 - '1.0' ok 5 - '+1.0' ok 6 - '-1.0' ok 7 - '-1.0e-12' ok 8 - Inf ok 9 - Infinity ok 10 - NaN ok 11 - foo ok 12 - undef ok 13 - HASH Ref ok 14 - ARRAY Ref ok 15 - Math::BigInt ok 16 - Stringified Math::BigInt ok 17 - Tied ok 18 - Tied ok 19 - MONGOLIAN DIGIT FIVE ok t/max.t ............... 1..10 ok 1 - defined ok 2 - single arg ok 3 - 2-arg ordered ok 4 - 2-arg reverse ordered ok 5 - 20-arg random order ok 6 - overload ok 7 - overload ok 8 - bigint ok 9 - bigint and normal int ok 10 - bigint and normal int ok t/maxstr.t ............ 1..5 ok 1 - defined ok 2 - single arg ok 3 - 2-arg ordered ok 4 - 2-arg reverse ordered ok 5 - random ordered ok t/min.t ............... 1..22 ok 1 - defined ok 2 - single arg ok 3 - 2-arg ordered ok 4 - 2-arg reverse ordered ok 5 - 20-arg random order ok 6 - overload ok 7 - overload ok 8 - bigint ok 9 - bigint and normal int ok 10 - bigint and normal int ok 11 - sum($\#list, 0) == 10-1 ok 12 - min(15,10) ok 13 - max($\#list, 0) == 10-1 ok 14 - sum($\#list, 0) == 20-1 ok 15 - min(15,20) ok 16 - max($\#list, 0) == 20-1 ok 17 - sum($\#list, 0) == 10-1 ok 18 - min(15,10) ok 19 - max($\#list, 0) == 10-1 ok 20 - sum($\#list, 0) == 30-1 ok 21 - min(15,30) ok 22 - max($\#list, 0) == 30-1 ok t/minstr.t ............ 1..5 ok 1 - defined ok 2 - single arg ok 3 - 2-arg ordered ok 4 - 2-arg reverse ordered ok 5 - random ordered ok t/openhan.t ........... 1..21 ok 1 - defined ok 2 - STDERR ok 3 - fileno(STDERR) ok 4 - closed ok 5 - works with indirect filehandles ok 6 - works with indirect filehandles ok 7 - works with in-memory files ok 8 - works with in-memory files ok 9 - works for *DATA ok 10 - works for *DATA ok 11 - works for *DATA{IO} ok 12 - works for IO::Handle objects ok 13 - unopened IO::Handle ok 14 - works for IO::File objects ok 15 - works for IO::File objects ok 16 - unopened IO::File ok 17 - tied handles are always ok ok 18 - tied handle refs are always ok ok 19 - undef is not a filehandle ok 20 - strings are not filehandles ok 21 - integers are not filehandles ok t/pair.t .............. 1..29 ok 1 - pairgrep list ok 2 - pairgrep scalar ok 3 - pairgrep pads with undef ok 4 - even-sized list yields no warnings from pairgrep ok 5 - odd-sized list yields warning from pairgrep ok 6 - pairgrep aliases elements ok 7 - pairfirst list ok 8 - pairfirst list empty ok 9 - pairfirst scalar true ok 10 - pairfirst scalar false ok 11 - pairmap list ok 12 - pairmap scalar ok 13 - pairmap list returning >2 items ok 14 - pairmap pads with undef ok 15 - pairmap aliases elements ok 16 - pairmap copes with stack movement ok 17 - pairmap result has more elements than input ok 18 - pairs ok 19 - pairs pads with undef ok 20 - pairs ->key ok 21 - pairs ->value ok 22 - pairs ->TO_JSON ok 23 - pairs ->TO_JSON is not blessed ok 24 - unpairs ok 25 - unpairs with short item fills in undef ok 26 - unpairs with long item truncates ok 27 - pairkeys ok 28 - pairvalues ok 29 - pairmap within pairmap ok t/product.t ........... 1..25 ok 1 - no args ok 2 - one arg ok 3 - 4 args ok 4 - one -1 ok 5 - first factor zero ok 6 - 0 * 1 ok 7 - 1 * 0 ok 8 - two 0 ok 9 - variable arg ok 10 - real numbers ok 11 - overload ok 12 - bigint ok 13 - bigint + builtin int ok 14 - bigint + builtin int ok 15 - overload returning non-overload ok 16 - overload returning non-overload ok 17 - overload returning non-overload ok 18 - min * min ok 19 - min * max ok 20 - max * min ok 21 - max * max ok 22 - min*8*min ok 23 - min*8*max ok 24 - min*max*8 ok 25 - max*max*8 ok t/prototype.t ......... 1..13 ok 1 - no prototype ok 2 - no prototype from CORE ok 3 - prototype ok 4 - prototype from CORE ok 5 - return value ok 6 - remove prototype ok 7 - empty prototype ok 8 - @ prototype ok 9 - remove prototype ok 10 - non existing sub ok 11 - change non existing sub ok 12 - forward declaration ok 13 - change forward declaration ok t/readonly.t .......... 1..11 ok 1 - number constant ok 2 - number variable ok 3 - no change to number variable ok 4 - string constant ok 5 - string variable ok 6 - no change to string variable ok 7 - reference to constant ok 8 - de-reference to constant ok 9 - glob ok 10 - reference a constant in a sub ok 11 - reference a non-constant in a sub ok t/reduce.t ............ 1..33 ok 1 - no args ok 2 - 4-arg divide ok 3 - one arg ok 4 - min ok 5 - concat ok 6 - call sub ok 7 - use eval{} ok 8 - die ok 9 - scalar context ok 10 - sub reference ok 11 - call sub ok 12 - eval string ok 13 - restore $a ok 14 - restore $b ok 15 - return ok 16 - return from loop ok 17 - other package ok 18 - undef active sub ok 19 - redefine self ok 20 - from active sub ok 21 - Refcount unchanged ok 22 - Not a subroutine reference ok 23 - Not a subroutine reference ok 24 - goto label ok 25 - goto sub ok 26 - reduce in list context yields only final answer ok 27 - xsub callbacks ok 28 - check for code reference ok 29 - check for code reference ok 30 - check for code reference ok 31 - check for code reference ok 32 - check for code reference ok 33 - missing SMG rt\#121992 ok t/reductions.t ........ 1..7 ok 1 - emmpty list ok 2 - sum 1..5 ok 3 - reductions in scalar context does not crash ok 4 - nothing destroyed yet ok 5 - all the items were destroyed ok 6 - die in BLOCK is propagated ok 7 - intermediate temporaries are destroyed after exception ok t/refaddr.t ........... 1..32 ok 1 - not undef ok 2 - not '10' ok 3 - not 'string' ok 4 - HASH(0x1e7cb68) ok 5 - HASH(0x1e7cb68) ok 6 - blessed with overload HASH(0x1e7cb68) ok 7 - HASH(0x1e7cb68) ok 8 - SCALAR(0x1e90a40) ok 9 - SCALAR(0x1e90a40) ok 10 - blessed with overload SCALAR(0x1e90a40) ok 11 - SCALAR(0x1e90a40) ok 12 - ARRAY(0x22b3c2c) ok 13 - ARRAY(0x22b3c2c) ok 14 - blessed with overload ARRAY(0x22b3c2c) ok 15 - ARRAY(0x22b3c2c) ok 16 - GLOB(0x225c80c) ok 17 - GLOB(0x225c80c) ok 18 - blessed with overload GLOB(0x225c80c) ok 19 - GLOB(0x225c80c) ok 20 - CODE(0x225c848) ok 21 - CODE(0x225c848) ok 22 - blessed with overload CODE(0x225c848) ok 23 - CODE(0x225c848) ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 - foo ok t/reftype.t ........... 1..32 ok 1 - number ok 2 - string ok 3 - HASH ref ok 4 - HASH ref ok 5 - HASH ref ok 6 - ARRAY ref ok 7 - ARRAY ref ok 8 - ARRAY ref ok 9 - SCALAR ref ok 10 - SCALAR ref ok 11 - SCALAR ref ok 12 - SCALAR ref (but SVt_RV) ok 13 - SCALAR ref (but SVt_RV) ok 14 - SCALAR ref (but SVt_RV) ok 15 - REF ref ok 16 - REF ref ok 17 - REF ref ok 18 - tied GLOB ref ok 19 - tied GLOB ref ok 20 - tied GLOB ref ok 21 - GLOB ref ok 22 - GLOB ref ok 23 - GLOB ref ok 24 - CODE ref ok 25 - CODE ref ok 26 - CODE ref ok 27 - IO ref ok 28 - IO ref ok 29 - IO ref ok 30 - REGEEXP ok 31 - REGEEXP ok 32 - REGEEXP ok t/rt-96343.t .......... 1..2 ok 1 - first (lc$_) perserves value ok 2 - any (lc$_) leaves value undisturbed ok t/sample.t ............ 1..9 ok 1 - returns correct count when plentiful ok 2 - returns correct count when exact ok 3 - returns correct count when short ok 4 - returns a permutation of the input list when exact ok 5 - returns different result on different random seed ok 6 - sample does not mutate passed array ok 7 - the 7 unselected items were destroyed ok 8 - all the items were destroyed ok 9 - rigged rand() yields predictable output ok t/scalarutil-proto.t .. 1..14 ok 1 - no prototype ok 2 - set prototype ok 3 - return value ok 4 - remove prototype ok 5 - empty prototype ok 6 - @ prototype ok 7 - remove prototype ok 8 - non existing sub ok 9 - change non existing sub ok 10 - forward declaration ok 11 - change forward declaration ok 12 - not a reference ok 13 - not a sub reference ok 14 - set_prototype() on tied CV ref ok t/shuffle.t ........... 1..7 ok 1 - no args ok 2 - 1 in 1 out ok 3 - one arg ok 4 - arg count ok 5 - result different to args ok 6 - values ok 7 - rigged rand() yields predictable output ok t/stack-corruption.t .. 1..1 ok 1 ok t/subname.t ........... 1..21 ok 1 - subname of \&subname ok 2 - subname of \&localfunc ok 3 - subname of \&fully::qualfied::func ok 4 - subname of anon sub ok 5 - subname [] dies ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 - subname of set_subname ok 19 - subname in deleted package ok 20 - rename from deleted package ok 21 - subname after rename ok t/sum.t ............... 1..18 ok 1 - no args ok 2 - one arg ok 3 - 4 args ok 4 - one -1 ok 5 - variable arg ok 6 - real numbers ok 7 - initial integer, then real ok 8 - overload ok 9 - bigint ok 10 - bigint + builtin int ok 11 - bigint + builtin int ok 12 - overload returning non-overload ok 13 - overload returning non-overload ok 14 - overload returning non-overload ok 15 - sum uses IV where it can ok 16 - sum uses IV where it can ok 17 - min + max ok 18 - max + min ok t/sum0.t .............. 1..3 ok 1 - no args ok 2 - one arg ok 3 - 4 args ok t/tainted.t ........... 1..5 ok 1 - constant number ok 2 - known variable ok 3 - interpreter variable ok 4 - copy of interpreter variable ok 5 - for magic variables ok t/uniq.t .............. 1..31 ok 1 - uniqstr of empty list ok 2 - uniqstr of singleton list ok 3 - uniqstr of repeated-element list ok 4 - uniqstr removes subsequent duplicates ok 5 - uniqstr compares strings ok 6 - uniqstr considers undef and empty-string equivalent ok 7 - uniqstr on undef yields a warning ok 8 - uniqstr on undef coerces to empty-string ok 9 - uniqstr is happy with Unicode strings ok 10 - uniqstr does not squash bytewise-equal but differently-encoded strings ok 11 - No warnings are printed when handling Unicode strings ok 12 - uniqint of empty list ok 13 - uniqint of repeated-element list ok 14 - uniqint removes subsequent duplicates ok 15 - uniqint compares as and returns integers ok 16 - uniqint considers undef and zero equivalent ok 17 - uniqint on undef yields a warning ok 18 - uniqint on undef coerces to zero ok 19 - uniqint copes with UVs ok 20 - uniqint copes with NVUV dualvars ok 21 - uniq of empty list ok 22 - uniq distintinguishes empty-string from undef ok 23 - uniq considers duplicate undefs as identical ok 24 - uniq on undef does not warn ok 25 - uniqstr() in scalar context ok 26 - uniqstr respects stringify overload ok 27 - uniqint respects int overload ok 28 - values filtered by uniqstr() are destroyed ok 29 - all values destroyed ok 30 - uniqstr handles magic ok 31 - uniq uniquifies mixed numbers and strings correctly in a tied array ok t/uniqnum.t ........... 1..23 ok 1 - uniqnum compares numbers ok 2 - uniqnum distinguishes floats ok 3 - uniqnum distinguishes large floats ok 4 - uniqnum distinguishes large floats (stringified) ok 5 - uniqnum preserves uniqueness of high precision floats ok 6 - uniqnum preserves uniqueness of high precision floats (stringified) ok 7 - uniqnum correctly compares UV/IVs that overflow NVs ok 8 - uniqnum correctly compares UV/IVs that don't overflow NVs ok 9 - uniqnum preserves the special values of +-Inf and Nan ok 10 - uniqnum preserves uniqueness of full integer range ok 11 - uniqnum preserves uniqueness of full integer range (stringified) ok 12 - uniqnum keeps uniqueness of numbers that stringify to the same byte pattern as a float ok 13 - uniqnum considers undef and zero equivalent ok 14 - uniqnum on undef yields a warning ok 15 - uniqnum on undef coerces to zero ok 16 - uniqnum handles negative zero ok 17 - uniqnum recognizes 99999999999999984 and 99999999999999984.0 as the same ok 18 - uniqnum recognizes -99999999999999984 and -99999999999999984.0 as the same ok 19 - uniqnum recognizes 100000000000000016 and 100000000000000016.0 as the same ok 20 - uniqnum recognizes -100000000000000016 and -100000000000000016.0 as the same ok 21 - uniqnum not confused by dual IV+NV ok 22 - uniqnum respects numify overload ok 23 - uniqnum handles magic ok t/weak.t .............. 1..28 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 - $y is weak after weaken() ok 19 - $y points at \"foo" after weaken() ok 20 - $y is still a SCALAR ref after unweaken() ok 21 - $y is not weak after unweaken() ok 22 - $y points at \"foo" after unweaken() ok 23 - $y still defined after undef $z ok 24 ok 25 ok 26 ok 27 ok 28 ok All tests successful. Files=35, Tests=2130, 18 wallclock secs ( 0.35 usr 0.14 sys + 6.15 cusr 0.60 csys = 7.24 CPU) Result: PASS make[1]: Leaving directory '/build/libscalar-list-utils-perl-1.55' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j10 install DESTDIR=/build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libscalar-list-utils-perl-1.55' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Util.bs blib/arch/auto/List/Util/Util.bs 644 Manifying 4 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl/usr/lib/i386-linux-gnu/perl5/5.32/auto/List/Util/Util.so Installing /build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl/usr/lib/i386-linux-gnu/perl5/5.32/Sub/Util.pm Installing /build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl/usr/lib/i386-linux-gnu/perl5/5.32/List/Util.pm Installing /build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl/usr/lib/i386-linux-gnu/perl5/5.32/List/Util/XS.pm Installing /build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl/usr/lib/i386-linux-gnu/perl5/5.32/Scalar/Util.pm Installing /build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl/usr/share/man/man3/List::Util.3pm Installing /build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl/usr/share/man/man3/Scalar::Util.3pm Installing /build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl/usr/share/man/man3/List::Util::XS.3pm Installing /build/libscalar-list-utils-perl-1.55/debian/libscalar-list-utils-perl/usr/share/man/man3/Sub::Util.3pm make[1]: Leaving directory '/build/libscalar-list-utils-perl-1.55' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libscalar-list-utils-perl' in '../libscalar-list-utils-perl_1.55-1_i386.deb'. dpkg-deb: building package 'libscalar-list-utils-perl-dbgsym' in '../libscalar-list-utils-perl-dbgsym_1.55-1_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libscalar-list-utils-perl_1.55-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/8161 and its subdirectories I: Current time: Sat Jun 26 18:01:43 -12 2021 I: pbuilder-time-stamp: 1624773703 Sun Jun 27 06:01:44 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ionos16-i386.debian.net. Sun Jun 27 06:01:44 UTC 2021 I: Preparing to do remote build '2' on ionos16-i386.debian.net. Sun Jun 27 06:02:11 UTC 2021 I: Deleting $TMPDIR on ionos16-i386.debian.net. Sun Jun 27 06:02:11 UTC 2021 I: libscalar-list-utils-perl_1.55-1_i386.changes: Format: 1.8 Date: Sun, 12 Apr 2020 16:09:03 +0200 Source: libscalar-list-utils-perl Binary: libscalar-list-utils-perl libscalar-list-utils-perl-dbgsym Architecture: i386 Version: 1:1.55-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libscalar-list-utils-perl - modules providing common scalar and list utility subroutines Changes: libscalar-list-utils-perl (1:1.55-1) unstable; urgency=medium . * Team upload. * debian/control: update Build-Depends for cross builds. * Import upstream version 1.55. * Add debian/tests/pkg-perl/use-name to autopkgtest one of the modules. Checksums-Sha1: cad60698e87bad1ec208f046e81d7c850235afc4 75880 libscalar-list-utils-perl-dbgsym_1.55-1_i386.deb 4f53fea11d47f75eaf3fc97d84d62b6ea8c78546 5022 libscalar-list-utils-perl_1.55-1_i386.buildinfo 6aa69f7073e2b3390b535dda542ea73e094eb5f9 62580 libscalar-list-utils-perl_1.55-1_i386.deb Checksums-Sha256: 4586ac48e4a11e29839235fcc67c5f9b0c4a704e9b1f093600d75233424cfaf0 75880 libscalar-list-utils-perl-dbgsym_1.55-1_i386.deb 9b6ca1e0082cfdde882f79a324e15638762e31e05fa083e1fbef67ef844c7f2a 5022 libscalar-list-utils-perl_1.55-1_i386.buildinfo bfc10f888fba74e171685e894f195cd4ded306728f0d164be2fb367192de25a8 62580 libscalar-list-utils-perl_1.55-1_i386.deb Files: d240332df43944019fb8279bd8c13e9b 75880 debug optional libscalar-list-utils-perl-dbgsym_1.55-1_i386.deb 9c66456a85b38616bef410b1eea51310 5022 perl optional libscalar-list-utils-perl_1.55-1_i386.buildinfo cd39cee15d031c46a00e44e071c60f4a 62580 perl optional libscalar-list-utils-perl_1.55-1_i386.deb Sun Jun 27 06:02:12 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.wv07EKxZ5a/libscalar-list-utils-perl_1.55-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.wv07EKxZ5a/libscalar-list-utils-perl_1.55-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.wv07EKxZ5a/libscalar-list-utils-perl_1.55-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.wv07EKxZ5a/b1/libscalar-list-utils-perl_1.55-1_i386.changes /srv/reproducible-results/rbuild-debian/tmp.wv07EKxZ5a/b2/libscalar-list-utils-perl_1.55-1_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.329s) 0.329s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.032s) 0.032s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sun Jun 27 06:02:14 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Sun Jun 27 06:02:14 UTC 2021 I: libscalar-list-utils-perl from bullseye built successfully and reproducibly on i386. Sun Jun 27 06:02:15 UTC 2021 I: Submitting .buildinfo files to external archives: Sun Jun 27 06:02:16 UTC 2021 I: Submitting 8.0K b1/libscalar-list-utils-perl_1.55-1_i386.buildinfo.asc Sun Jun 27 06:02:16 UTC 2021 I: Submitting 8.0K b2/libscalar-list-utils-perl_1.55-1_i386.buildinfo.asc Sun Jun 27 06:02:17 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Jun 27 06:02:17 UTC 2021 I: Done submitting .buildinfo files. Sun Jun 27 06:02:17 UTC 2021 I: Removing signed libscalar-list-utils-perl_1.55-1_i386.buildinfo.asc files: removed './b1/libscalar-list-utils-perl_1.55-1_i386.buildinfo.asc' removed './b2/libscalar-list-utils-perl_1.55-1_i386.buildinfo.asc'