Fri Jun 4 02:07:30 UTC 2021 I: starting to build libpath-iterator-rule-perl/bullseye/i386 on jenkins on '2021-06-04 02:07' Fri Jun 4 02:07:30 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_13/13251/console.log Fri Jun 4 02:07:30 UTC 2021 I: Downloading source for bullseye/libpath-iterator-rule-perl=1.014-1 --2021-06-04 02:07:31-- http://cdn-fastly.deb.debian.org/debian/pool/main/libp/libpath-iterator-rule-perl/libpath-iterator-rule-perl_1.014-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2508 (2.4K) Saving to: ‘libpath-iterator-rule-perl_1.014-1.dsc’ 0K .. 100% 220M=0s 2021-06-04 02:07:31 (220 MB/s) - ‘libpath-iterator-rule-perl_1.014-1.dsc’ saved [2508/2508] Fri Jun 4 02:07:31 UTC 2021 I: libpath-iterator-rule-perl_1.014-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libpath-iterator-rule-perl Binary: libpath-iterator-rule-perl Architecture: all Version: 1.014-1 Maintainer: Debian Perl Group Uploaders: Jonas Smedegaard Homepage: https://github.com/dagolden/Path-Iterator-Rule Standards-Version: 4.2.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libpath-iterator-rule-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libpath-iterator-rule-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: cdbs, perl, debhelper, dh-buildinfo, libnumber-compare-perl, libtext-glob-perl, libtry-tiny-perl, libfile-pushd-perl, libpath-tiny-perl, libtest-deep-perl, libtest-filename-perl, libcpan-meta-perl, libcpan-meta-requirements-perl Package-List: libpath-iterator-rule-perl deb perl optional arch=all Checksums-Sha1: 87ebe2a7cf9489943b50da7af847346149af8c16 52883 libpath-iterator-rule-perl_1.014.orig.tar.gz 1008d9d206fc70aa7ba23203bec409a34841066e 4720 libpath-iterator-rule-perl_1.014-1.debian.tar.xz Checksums-Sha256: 3f7401d8bed43fc9303409ef6d9f34b85a203de6944050bbeb95855d3298b1a6 52883 libpath-iterator-rule-perl_1.014.orig.tar.gz 5864b1d29c2cb58f305f7116a875147e38a4a3d8b8942378fa199b522923c259 4720 libpath-iterator-rule-perl_1.014-1.debian.tar.xz Files: ce90cdf750427560d6e4fc021a072c04 52883 libpath-iterator-rule-perl_1.014.orig.tar.gz 5f2f7e68078ff0389f259c9694b95469 4720 libpath-iterator-rule-perl_1.014-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAlt+3ApfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgYBAw/8CYf/cMPkvQCoRaIujVsiWDzw8+7Nq8KBomvzCK/olBzZwmQYUk5PdndS sAHOBFl+l3FxYipqfQy6pqFp7e+VDS9gcikaXLZGwbNqZ6D3l/JCmG20fRWx3P24 WleLVa7QF3QiAt1SYTbkUn9EiNU78N1IRbPfvkuFy2HFQYv5U+v8unt0vVN9ULhU c9BPyfFmQsiFYrisrDD/t83v9Ff944sKI5jVoN+dYuzRDHuOi5TgqRjXaKIlQhA7 befpFsu+sOQHkGPocnqOVu4wvCKXqq4z9D7g9avbUTpXierYVv4R3J9clki4qBDM nUgJthyyNyplyQRroKAHk6etCyxz+RhyUqYgy2fKDiRLoqWRalpwLZ9XhKrEZ9Yo bRMXOp8pkpPvQkvSyXQSUEE3/geWmuc6QxlDlB+q2pFPd1d6T3MX81YdTMLSEUW0 1xE+mVVHt857qZ7oIu1gxgtgi7UBuyIsmAViTrWw98I3heqNQXSr9ScLXXromcmz LBHhsDTR5Vq03XfLFoUG+mC6g4ImGSAfrDsm0N3Z2+LUmcklsSqz/A2qwoO6clCa mFIy4m+SAPC+VtiWF9qNK5E0oWC0yZaG/o9eifhtxKeQK7yfuSjRSRXmfVsUjSk6 womlG7GFUudUf13sYzdsQN1FyVvkckk3DZOoWHY8ocLU95kq68g= =CMkf -----END PGP SIGNATURE----- Fri Jun 4 02:07:31 UTC 2021 I: Checking whether the package is not for us Fri Jun 4 02:07:31 UTC 2021 I: Starting 1st build on remote node ionos12-i386.debian.net. Fri Jun 4 02:07:31 UTC 2021 I: Preparing to do remote build '1' on ionos12-i386.debian.net. Fri Jun 4 02:14:51 UTC 2021 I: Deleting $TMPDIR on ionos12-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Jun 3 14:07:32 -12 2021 I: pbuilder-time-stamp: 1622772452 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libpath-iterator-rule-perl_1.014-1.dsc] I: copying [./libpath-iterator-rule-perl_1.014.orig.tar.gz] I: copying [./libpath-iterator-rule-perl_1.014-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.OpufxwDf/trustedkeys.kbx': General error gpgv: Signature made Thu Aug 23 04:08:42 2018 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libpath-iterator-rule-perl_1.014-1.dsc dpkg-source: info: extracting libpath-iterator-rule-perl in libpath-iterator-rule-perl-1.014 dpkg-source: info: unpacking libpath-iterator-rule-perl_1.014.orig.tar.gz dpkg-source: info: unpacking libpath-iterator-rule-perl_1.014-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying module-in-inc-shebang.diff I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/12187/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=10' DISTRIBUTION='' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='25ebce1364704dbcabab709720b52143' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='12187' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.m7AN2ZGIUM/pbuilderrc_tsBc --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.m7AN2ZGIUM/b1 --logfile b1/build.log libpath-iterator-rule-perl_1.014-1.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://78.137.99.97:3128' I: uname -a Linux ionos12-i386 4.19.0-16-686-pae #1 SMP Debian 4.19.181-1 (2021-03-19) i686 GNU/Linux I: ls -l /bin total 5832 -rwxr-xr-x 1 root root 1367848 Feb 24 08:57 bash -rwxr-xr-x 3 root root 38280 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 17768 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 38824 Sep 22 2020 cat -rwxr-xr-x 1 root root 71624 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 67528 Sep 22 2020 chmod -rwxr-xr-x 1 root root 75752 Sep 22 2020 chown -rwxr-xr-x 1 root root 157960 Sep 22 2020 cp -rwxr-xr-x 1 root root 128724 Dec 10 01:23 dash -rwxr-xr-x 1 root root 124904 Sep 22 2020 date -rwxr-xr-x 1 root root 92172 Sep 22 2020 dd -rwxr-xr-x 1 root root 100752 Sep 22 2020 df -rwxr-xr-x 1 root root 153964 Sep 22 2020 dir -rwxr-xr-x 1 root root 83644 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 34664 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 34664 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 71928 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 30112 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 210488 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 100952 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 21916 Nov 6 2019 hostname -rwxr-xr-x 1 root root 83980 Sep 22 2020 ln -rwxr-xr-x 1 root root 55572 Feb 7 2020 login -rwxr-xr-x 1 root root 153964 Sep 22 2020 ls -rwxr-xr-x 1 root root 153124 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 96328 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 79912 Sep 22 2020 mknod -rwxr-xr-x 1 root root 47048 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 58920 Feb 7 02:38 more -rwsr-xr-x 1 root root 50720 Feb 7 02:38 mount -rwxr-xr-x 1 root root 13856 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 157996 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 38824 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Feb 24 08:57 rbash -> bash -rwxr-xr-x 1 root root 46984 Sep 22 2020 readlink -rwxr-xr-x 1 root root 75720 Sep 22 2020 rm -rwxr-xr-x 1 root root 46984 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 22292 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 125036 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jun 1 21:26 sh -> dash -rwxr-xr-x 1 root root 34696 Sep 22 2020 sleep -rwxr-xr-x 1 root root 83880 Sep 22 2020 stty -rwsr-xr-x 1 root root 79396 Feb 7 02:38 su -rwxr-xr-x 1 root root 34696 Sep 22 2020 sync -rwxr-xr-x 1 root root 602584 Feb 16 21:55 tar -rwxr-xr-x 1 root root 13860 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 108520 Sep 22 2020 touch -rwxr-xr-x 1 root root 34664 Sep 22 2020 true -rwxr-xr-x 1 root root 17768 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 30236 Feb 7 02:38 umount -rwxr-xr-x 1 root root 34664 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 153964 Sep 22 2020 vdir -rwxr-xr-x 1 root root 63024 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/12187/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: cdbs, perl, debhelper, dh-buildinfo, libnumber-compare-perl, libtext-glob-perl, libtry-tiny-perl, libfile-pushd-perl, libpath-tiny-perl, libtest-deep-perl, libtest-filename-perl, libcpan-meta-perl, libcpan-meta-requirements-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19674 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on debhelper; however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-buildinfo; however: Package dh-buildinfo is not installed. pbuilder-satisfydepends-dummy depends on libnumber-compare-perl; however: Package libnumber-compare-perl is not installed. pbuilder-satisfydepends-dummy depends on libtext-glob-perl; however: Package libtext-glob-perl is not installed. pbuilder-satisfydepends-dummy depends on libtry-tiny-perl; however: Package libtry-tiny-perl is not installed. pbuilder-satisfydepends-dummy depends on libfile-pushd-perl; however: Package libfile-pushd-perl is not installed. pbuilder-satisfydepends-dummy depends on libpath-tiny-perl; however: Package libpath-tiny-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-deep-perl; however: Package libtest-deep-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-filename-perl; however: Package libtest-filename-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cdbs{a} debhelper{a} dh-autoreconf{a} dh-buildinfo{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-pushd-perl{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libnumber-compare-perl{a} libpath-tiny-perl{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtest-deep-perl{a} libtest-filename-perl{a} libtext-glob-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libunicode-utf8-perl lynx wget 0 packages upgraded, 40 newly installed, 0 to remove and 0 not upgraded. Need to get 18.8 MB of archives. After unpacking 68.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main i386 bsdextrautils i386 2.36.1-7 [148 kB] Get: 2 http://deb.debian.org/debian bullseye/main i386 libuchardet0 i386 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main i386 groff-base i386 1.22.4-6 [952 kB] Get: 4 http://deb.debian.org/debian bullseye/main i386 libpipeline1 i386 1.5.3-1 [36.8 kB] Get: 5 http://deb.debian.org/debian bullseye/main i386 man-db i386 2.9.4-2 [1367 kB] Get: 6 http://deb.debian.org/debian bullseye/main i386 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main i386 libmagic-mgc i386 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main i386 libmagic1 i386 1:5.39-3 [133 kB] Get: 9 http://deb.debian.org/debian bullseye/main i386 file i386 1:5.39-3 [69.0 kB] Get: 10 http://deb.debian.org/debian bullseye/main i386 gettext-base i386 0.21-4 [176 kB] Get: 11 http://deb.debian.org/debian bullseye/main i386 libsigsegv2 i386 2.13-1 [35.1 kB] Get: 12 http://deb.debian.org/debian bullseye/main i386 m4 i386 1.4.18-5 [206 kB] Get: 13 http://deb.debian.org/debian bullseye/main i386 autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main i386 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main i386 automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main i386 autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main i386 cdbs all 0.4.163 [82.6 kB] Get: 18 http://deb.debian.org/debian bullseye/main i386 libdebhelper-perl all 13.3.4 [189 kB] Get: 19 http://deb.debian.org/debian bullseye/main i386 libtool all 2.4.6-15 [513 kB] Get: 20 http://deb.debian.org/debian bullseye/main i386 dh-autoreconf all 20 [17.1 kB] Get: 21 http://deb.debian.org/debian bullseye/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 22 http://deb.debian.org/debian bullseye/main i386 libsub-override-perl all 0.09-2 [10.2 kB] Get: 23 http://deb.debian.org/debian bullseye/main i386 libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 24 http://deb.debian.org/debian bullseye/main i386 dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 25 http://deb.debian.org/debian bullseye/main i386 libelf1 i386 0.183-1 [171 kB] Get: 26 http://deb.debian.org/debian bullseye/main i386 dwz i386 0.13+20210201-1 [179 kB] Get: 27 http://deb.debian.org/debian bullseye/main i386 libicu67 i386 67.1-6 [8776 kB] Get: 28 http://deb.debian.org/debian bullseye/main i386 libxml2 i386 2.9.10+dfsg-6.7 [728 kB] Get: 29 http://deb.debian.org/debian bullseye/main i386 gettext i386 0.21-4 [1322 kB] Get: 30 http://deb.debian.org/debian bullseye/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 31 http://deb.debian.org/debian bullseye/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian bullseye/main i386 debhelper all 13.3.4 [1049 kB] Get: 33 http://deb.debian.org/debian bullseye/main i386 dh-buildinfo all 0.11+nmu2 [18.4 kB] Get: 34 http://deb.debian.org/debian bullseye/main i386 libfile-pushd-perl all 1.016-1 [13.9 kB] Get: 35 http://deb.debian.org/debian bullseye/main i386 libnumber-compare-perl all 0.03-1.1 [6956 B] Get: 36 http://deb.debian.org/debian bullseye/main i386 libpath-tiny-perl all 0.118-1 [53.5 kB] Get: 37 http://deb.debian.org/debian bullseye/main i386 libtest-deep-perl all 1.130-1 [49.3 kB] Get: 38 http://deb.debian.org/debian bullseye/main i386 libtest-filename-perl all 0.03-1.1 [11.5 kB] Get: 39 http://deb.debian.org/debian bullseye/main i386 libtext-glob-perl all 0.11-1 [8888 B] Get: 40 http://deb.debian.org/debian bullseye/main i386 libtry-tiny-perl all 0.30-1 [23.3 kB] Fetched 18.8 MB in 12s (1518 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19674 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-7_i386.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../01-libuchardet0_0.0.7-1_i386.deb ... Unpacking libuchardet0:i386 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_i386.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../03-libpipeline1_1.5.3-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_i386.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_i386.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../07-libmagic1_1%3a5.39-3_i386.deb ... Unpacking libmagic1:i386 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_i386.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_i386.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../10-libsigsegv2_2.13-1_i386.deb ... Unpacking libsigsegv2:i386 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_i386.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package cdbs. Preparing to unpack .../16-cdbs_0.4.163_all.deb ... Unpacking cdbs (0.4.163) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../17-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../18-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../19-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../20-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../21-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../24-libelf1_0.183-1_i386.deb ... Unpacking libelf1:i386 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.13+20210201-1_i386.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:i386. Preparing to unpack .../26-libicu67_67.1-6_i386.deb ... Unpacking libicu67:i386 (67.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../27-libxml2_2.9.10+dfsg-6.7_i386.deb ... Unpacking libxml2:i386 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.21-4_i386.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package dh-buildinfo. Preparing to unpack .../32-dh-buildinfo_0.11+nmu2_all.deb ... Unpacking dh-buildinfo (0.11+nmu2) ... Selecting previously unselected package libfile-pushd-perl. Preparing to unpack .../33-libfile-pushd-perl_1.016-1_all.deb ... Unpacking libfile-pushd-perl (1.016-1) ... Selecting previously unselected package libnumber-compare-perl. Preparing to unpack .../34-libnumber-compare-perl_0.03-1.1_all.deb ... Unpacking libnumber-compare-perl (0.03-1.1) ... Selecting previously unselected package libpath-tiny-perl. Preparing to unpack .../35-libpath-tiny-perl_0.118-1_all.deb ... Unpacking libpath-tiny-perl (0.118-1) ... Selecting previously unselected package libtest-deep-perl. Preparing to unpack .../36-libtest-deep-perl_1.130-1_all.deb ... Unpacking libtest-deep-perl (1.130-1) ... Selecting previously unselected package libtest-filename-perl. Preparing to unpack .../37-libtest-filename-perl_0.03-1.1_all.deb ... Unpacking libtest-filename-perl (0.03-1.1) ... Selecting previously unselected package libtext-glob-perl. Preparing to unpack .../38-libtext-glob-perl_0.11-1_all.deb ... Unpacking libtext-glob-perl (0.11-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../39-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Setting up libpipeline1:i386 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:i386 (67.1-6) ... Setting up libtext-glob-perl (0.11-1) ... Setting up libtest-deep-perl (1.130-1) ... Setting up libfile-pushd-perl (1.016-1) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up libmagic1:i386 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up libnumber-compare-perl (0.03-1.1) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:i386 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libpath-tiny-perl (0.118-1) ... Setting up libuchardet0:i386 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up cdbs (0.4.163) ... Setting up libelf1:i386 (0.183-1) ... Setting up libxml2:i386 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up libtest-filename-perl (0.03-1.1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Setting up dh-buildinfo (0.11+nmu2) ... Processing triggers for libc-bin (2.31-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libpath-iterator-rule-perl-1.014/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libpath-iterator-rule-perl dpkg-buildpackage: info: source version 1.014-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Laurent Baillet dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libpath-iterator-rule-perl-1.014=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" -k clean make[1]: Entering directory '/build/libpath-iterator-rule-perl-1.014' make[1]: *** No rule to make target 'clean'. make[1]: Leaving directory '/build/libpath-iterator-rule-perl-1.014' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-check dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules build test -x debian/rules mkdir -p "." cd . && /usr/bin/perl -I. Makefile.PL NOECHO= INSTALLDIRS=vendor Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Path::Iterator::Rule Writing MYMETA.yml and MYMETA.json /usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libpath-iterator-rule-perl-1.014=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" all make[1]: Entering directory '/build/libpath-iterator-rule-perl-1.014' "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/Path/Iterator chmod 755 blib/lib/Path/Iterator touch blib/lib/Path/Iterator/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch chmod 755 blib/arch touch blib/arch/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/auto/Path/Iterator/Rule chmod 755 blib/lib/auto/Path/Iterator/Rule touch blib/lib/auto/Path/Iterator/Rule/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch/auto/Path/Iterator/Rule chmod 755 blib/arch/auto/Path/Iterator/Rule touch blib/arch/auto/Path/Iterator/Rule/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/bin chmod 755 blib/bin touch blib/bin/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/script chmod 755 blib/script touch blib/script/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man1 chmod 755 blib/man1 touch blib/man1/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man3 chmod 755 blib/man3 touch blib/man3/.exists true true true "/usr/bin/perl" -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''blib/lib/auto'\'', q[], '\''755'\'')' -- \ 'lib/PIR.pm' 'blib/lib/PIR.pm' \ 'lib/Path/Iterator/Rule.pm' 'blib/lib/Path/Iterator/Rule.pm' cp lib/PIR.pm blib/lib/PIR.pm cp lib/Path/Iterator/Rule.pm blib/lib/Path/Iterator/Rule.pm touch pm_to_blib true true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/PIR.pm blib/man3/PIR.3pm \ lib/Path/Iterator/Rule.pm blib/man3/Path::Iterator::Rule.3pm Manifying 2 pod documents true make[1]: Leaving directory '/build/libpath-iterator-rule-perl-1.014' touch debian/stamp-makefile-build /usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libpath-iterator-rule-perl-1.014=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1 make[1]: Entering directory '/build/libpath-iterator-rule-perl-1.014' true true true true true true true true true PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker 6.17 7.44 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.44 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # Exporter any 5.74 # ExtUtils::MakeMaker any 7.44 # File::Spec any 3.78 # File::Temp any 0.2309 # File::pushd any 1.016 # Path::Tiny any 0.118 # Test::Deep any 1.130 # Test::Filename 0.03 0.03 # Test::More 0.92 1.302175 # lib any 0.65 # parent any 0.238 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------------ ---- ------ # Carp any 1.50 # File::Basename any 2.85 # File::Spec any 3.78 # List::Util any 1.55 # Number::Compare 0.02 0.03 # Scalar::Util any 1.55 # Text::Glob any 0.11 # Try::Tiny any 0.30 # if any 0.0608 # strict any 1.11 # warnings any 1.47 # warnings::register any 1.04 # t/00-report-prereqs.t .... 1..1 ok 1 ok t/basic.t ................ ok 1 - require Path::Iterator::Rule; ok 2 - Iterator files ok 3 - Iterator returns string, not object ok 4 - All files ok 5 - All files (scalar context) ok 6 - All files and dirs ok 7 - All files and dirs w/ cwd ok 8 - All w/ prune dir ok 9 - All w/ prune top directory ok 10 - All w/ prune subdirs 1..10 ok t/breadth-depth-files.t .. ok 1 - Depth first iteration (pre) ok 2 - Depth first iteration (post) 1..2 ok t/breadth-depth.t ........ ok 1 - Breadth first iteration ok 2 - Depth first iteration (pre) ok 3 - Depth first iteration (post) 1..3 ok t/children-order.t ....... ok 1 - Breadth first iteration ok 2 - Depth first iteration (pre) ok 3 - Depth first iteration (post) 1..3 ok t/clone.t ................ ok 1 - new *aa* ok 2 - new *bb* ok 3 - cloned *aa* ok 4 - cloned *bb* 1..4 ok t/content.t .............. ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok t/error_handler.t ........ ok 1 - default error handler dies ok 2 - error handler catches fatalities ok 3 - saw correct number of errors ok 4 - object has file path of error ok 5 - handler gets message 1..5 ok t/fast.t ................. ok 1 - all() gives sorted order ok 2 - all_fast() gives disk order 1..2 ok t/helpers.t .............. ok 1 - Path::Iterator::Rule->can('txt') ok 2 - exception if helper exists ok 3 - All: one file ok 4 - got expected file 1..4 ok t/logic.t ................ ok 1 - catch invalid rules ok 2 - catch 0 but true ok 3 - not() test ok 4 - or() test ok 5 - skip() test ok 6 - skip() with custom rule ok 7 - skip() with crazy custom rule ok 8 - skip() with skip ok 9 - nested not and or with references ok 10 - nested and + or with prunning 1..10 ok t/min-max-depth.t ........ ok 1 - min_depth(3) test ok 2 - max_depth(2) test ok 3 - min_depth(2)->max_depth(3) test 1..3 ok t/names.t ................ ok 1 - name('Foo') empty match ok 2 - name('Foo.*') match ok 3 - name(qr/Foo/) match ok 4 - name(qr/Foo/) match ok 5 - name(qr/Foo/) match ok 6 - name('*.pod', '*.pm') match ok 7 - iname(qr/foo/) match ok 8 - iname(qr/foo/) match ok 9 - iname('foo.*') match 1..9 ok t/perl.t ................. ok 1 - all perl files 1..1 ok t/pir.t .................. ok 1 - Iterator: one file ok 2 - Iterator: returns string, not object ok 3 - All: one file ok 4 - All: 3 directories ok 5 - All w/ cwd: 3 directories ok 6 - All w/ prune: 2 directories 1..6 ok t/relative.t ............. ok 1 - Depth first iteration (pre) ok 2 - Depth first iteration (post) 1..2 ok t/stat_tests.t ........... ok 1 - Any file ok 2 - size > 0 1..2 ok t/stringify.t ............ ok 1 - Object-based subclass (all) ok 2 - Object-based subclass (all_fast) 1..2 ok t/symlink.t .............. ok 1 - Follow symlinks ok 2 - Follow symlinks, but loop_safe = 0 ok 3 - Don't follow symlinks, but report them ok 4 - Don't follow or report symlinks ok 5 - Dangling symlinks ok 6 - No dangling symlinks ok 7 - Only non-dangling symlinks ok 8 - Symlink loop 1..8 ok t/unsorted.t ............. ok 1 - unsorted gives disk order 1..1 ok t/vcs.t .................. ok 1 - not_vcs test 1..1 ok t/visitor.t .............. ok 1 - Visitor (depth) ok 2 - Visitor (breadth) 1..2 ok t/x_tests.t .............. ok 1 - Any file ok 2 - readable ok 3 - not_readable 1..3 ok All tests successful. Files=23, Tests=91, 5 wallclock secs ( 0.13 usr 0.06 sys + 4.04 cusr 0.34 csys = 4.57 CPU) Result: PASS true make[1]: Leaving directory '/build/libpath-iterator-rule-perl-1.014' touch debian/stamp-makefile-check fakeroot debian/rules binary test -x debian/rules dh_testroot dh_prep dh_installdirs -A dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 9 in use) mkdir -p "." /usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libpath-iterator-rule-perl-1.014=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl" make[1]: Entering directory '/build/libpath-iterator-rule-perl-1.014' true true true true true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/PIR.pm blib/man3/PIR.3pm \ lib/Path/Iterator/Rule.pm blib/man3/Path::Iterator::Rule.3pm Manifying 2 pod documents true umask 022; "/usr/bin/perl" -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''0'\'', uninstall_shadows => '\''0'\'', dir_mode => '\''755'\'' ]);' -- \ "blib/lib" "/build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/share/perl5" \ "blib/arch" "/build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/lib/i386-linux-gnu/perl5/5.32" \ "blib/bin" "/build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/bin" \ "blib/script" "/build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/bin" \ "blib/man1" "/build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/share/man/man1" \ "blib/man3" "/build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/share/man/man3" Installing /build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/share/perl5/PIR.pm Installing /build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/share/perl5/Path/Iterator/Rule.pm Installing /build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/share/man/man3/Path::Iterator::Rule.3pm Installing /build/libpath-iterator-rule-perl-1.014/debian/libpath-iterator-rule-perl/usr/share/man/man3/PIR.3pm true true true make[1]: Leaving directory '/build/libpath-iterator-rule-perl-1.014' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libpath-iterator-rule-perl.substvars dh_installdirs -plibpath-iterator-rule-perl \ dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdocs -plibpath-iterator-rule-perl ./README dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installexamples -plibpath-iterator-rule-perl examples/* dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installman -plibpath-iterator-rule-perl dh_installman: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installinfo -plibpath-iterator-rule-perl dh_installinfo: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installmenu -plibpath-iterator-rule-perl dh_installcron -plibpath-iterator-rule-perl dh_systemd_enable -plibpath-iterator-rule-perl dh_systemd_enable: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installinit -plibpath-iterator-rule-perl dh_installinit: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdebconf -plibpath-iterator-rule-perl dh_installemacsen -plibpath-iterator-rule-perl dh_installcatalogs -plibpath-iterator-rule-perl dh_installpam -plibpath-iterator-rule-perl dh_installlogrotate -plibpath-iterator-rule-perl dh_installlogcheck -plibpath-iterator-rule-perl dh_installchangelogs -plibpath-iterator-rule-perl ./Changes dh_installudev -plibpath-iterator-rule-perl dh_lintian -plibpath-iterator-rule-perl dh_bugfiles -plibpath-iterator-rule-perl dh_install -plibpath-iterator-rule-perl dh_install: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_systemd_start -plibpath-iterator-rule-perl dh_systemd_start: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_link -plibpath-iterator-rule-perl dh_buildinfo -plibpath-iterator-rule-perl dh_installmime -plibpath-iterator-rule-perl dh_installgsettings -plibpath-iterator-rule-perl dh_strip -plibpath-iterator-rule-perl dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip_nondeterminism -plibpath-iterator-rule-perl dh_compress -plibpath-iterator-rule-perl dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_fixperms -plibpath-iterator-rule-perl dh_makeshlibs -plibpath-iterator-rule-perl dh_installdeb -plibpath-iterator-rule-perl dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_perl -plibpath-iterator-rule-perl dh_shlibdeps -plibpath-iterator-rule-perl dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_gencontrol -plibpath-iterator-rule-perl dh_md5sums -plibpath-iterator-rule-perl dh_builddeb -plibpath-iterator-rule-perl dpkg-deb: building package 'libpath-iterator-rule-perl' in '../libpath-iterator-rule-perl_1.014-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libpath-iterator-rule-perl_1.014-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/12187 and its subdirectories I: Current time: Thu Jun 3 14:14:50 -12 2021 I: pbuilder-time-stamp: 1622772890 Fri Jun 4 02:14:51 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ionos6-i386.debian.net. Fri Jun 4 02:14:51 UTC 2021 I: Preparing to do remote build '2' on ionos6-i386.debian.net. Fri Jun 4 02:15:16 UTC 2021 I: Deleting $TMPDIR on ionos6-i386.debian.net. Fri Jun 4 02:15:16 UTC 2021 I: libpath-iterator-rule-perl_1.014-1_i386.changes: Format: 1.8 Date: Tue, 21 Aug 2018 10:15:46 +0000 Source: libpath-iterator-rule-perl Binary: libpath-iterator-rule-perl Architecture: all Version: 1.014-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Laurent Baillet Description: libpath-iterator-rule-perl - iterative, recursive file finder Changes: libpath-iterator-rule-perl (1.014-1) unstable; urgency=medium . * Team upload. . [ gregor herrmann ] * debian/*: update GitHub URLs to use HTTPS. . [ Laurent Baillet ] * add upstream metadata * New upstream version 1.014 * fix lintian wrong-path-for-interpreter error * declare compliance with Debian Policy 4.2.0 * declare test suite Checksums-Sha1: 99b7ef0b463efac76208b6d5527ac0a969b1cb52 53880 libpath-iterator-rule-perl_1.014-1_all.deb 7e80eb8537387b98b052ddace14f781d4aa92dad 4941 libpath-iterator-rule-perl_1.014-1_i386.buildinfo Checksums-Sha256: ea577521bbf03eca0920fd415eb1300a0a1ee5f73b79fa4e45ffecb4926d2fe5 53880 libpath-iterator-rule-perl_1.014-1_all.deb 8e59a502f855fdd7bb9d36960a062a14ff18c6566fe24e3b7e9f979b22240a1a 4941 libpath-iterator-rule-perl_1.014-1_i386.buildinfo Files: d16079d54db364c9c35d9cf096e381a5 53880 perl optional libpath-iterator-rule-perl_1.014-1_all.deb 0eba80c12cd6c15b3e7768edaa4e8936 4941 perl optional libpath-iterator-rule-perl_1.014-1_i386.buildinfo Fri Jun 4 02:15:19 UTC 2021 I: diffoscope 172 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.m7AN2ZGIUM/libpath-iterator-rule-perl_1.014-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.m7AN2ZGIUM/libpath-iterator-rule-perl_1.014-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.m7AN2ZGIUM/libpath-iterator-rule-perl_1.014-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.m7AN2ZGIUM/b1/libpath-iterator-rule-perl_1.014-1_i386.changes /srv/reproducible-results/rbuild-debian/tmp.m7AN2ZGIUM/b2/libpath-iterator-rule-perl_1.014-1_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 1.204s) 1.204s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.019s) 0.019s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Fri Jun 4 02:37:19 UTC 2021 I: diffoscope 172 found no differences in the changes files, and a .buildinfo file also exists. Fri Jun 4 02:37:19 UTC 2021 I: libpath-iterator-rule-perl from bullseye built successfully and reproducibly on i386. Fri Jun 4 02:37:21 UTC 2021 I: Submitting .buildinfo files to external archives: Fri Jun 4 02:37:21 UTC 2021 I: Submitting 8.0K b1/libpath-iterator-rule-perl_1.014-1_i386.buildinfo.asc Fri Jun 4 02:37:23 UTC 2021 I: Submitting 8.0K b2/libpath-iterator-rule-perl_1.014-1_i386.buildinfo.asc Fri Jun 4 02:37:24 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Jun 4 02:37:24 UTC 2021 I: Done submitting .buildinfo files. Fri Jun 4 02:37:24 UTC 2021 I: Removing signed libpath-iterator-rule-perl_1.014-1_i386.buildinfo.asc files: removed './b1/libpath-iterator-rule-perl_1.014-1_i386.buildinfo.asc' removed './b2/libpath-iterator-rule-perl_1.014-1_i386.buildinfo.asc'