Fri May 21 18:37:03 UTC 2021 I: starting to build libhtml-mason-perl/bullseye/i386 on jenkins on '2021-05-21 18:36' Fri May 21 18:37:03 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_7/6266/console.log Fri May 21 18:37:03 UTC 2021 I: Downloading source for bullseye/libhtml-mason-perl=1:1.59-1 --2021-05-21 18:37:03-- http://cdn-fastly.deb.debian.org/debian/pool/main/libh/libhtml-mason-perl/libhtml-mason-perl_1.59-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2946 (2.9K) Saving to: ‘libhtml-mason-perl_1.59-1.dsc’ 0K .. 100% 121M=0s 2021-05-21 18:37:03 (121 MB/s) - ‘libhtml-mason-perl_1.59-1.dsc’ saved [2946/2946] Fri May 21 18:37:03 UTC 2021 I: libhtml-mason-perl_1.59-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libhtml-mason-perl Binary: libhtml-mason-perl, libhtml-mason-perl-doc Architecture: all Version: 1:1.59-1 Maintainer: Debian Perl Group Uploaders: Ivan Kohler , gregor herrmann , Florian Schlichting , Xavier Guimard , Dominic Hargreaves Homepage: http://www.masonhq.com/ Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libhtml-mason-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libhtml-mason-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libapache2-mod-perl2 , libcache-cache-perl , libcgi-pm-perl , libchi-perl , libclass-container-perl , libexception-class-perl , libhtml-parser-perl , liblog-any-perl , libparams-validate-perl , libtest-deep-perl , libtest-memory-cycle-perl , libtest-pod-perl , perl Package-List: libhtml-mason-perl deb perl optional arch=all libhtml-mason-perl-doc deb doc optional arch=all Checksums-Sha1: 7f39c1e341b7f4bfa64c31ce158b37e2f9be2e0d 323661 libhtml-mason-perl_1.59.orig.tar.gz 353ee0ee0c420320abe4ca4b72ce153c0a5ecb6a 17260 libhtml-mason-perl_1.59-1.debian.tar.xz Checksums-Sha256: 95bed2a6c488370046aa314be4b592bd65a6522f8845da8b36a6aff9a8b439d0 323661 libhtml-mason-perl_1.59.orig.tar.gz b6c3bf1475256d46f1f9f67679d1d02e24747346cf9369acd6a8ccc23eab2131 17260 libhtml-mason-perl_1.59-1.debian.tar.xz Files: e9229057cbfb2f104bf2a59848e14580 323661 libhtml-mason-perl_1.59.orig.tar.gz 452907b51a977338d743c47047575f8b 17260 libhtml-mason-perl_1.59-1.debian.tar.xz Dgit: 8cdd2d4fb5c0ec46f444201567c37d9b3c1d3d5c debian archive/debian/1%1.59-1 https://git.dgit.debian.org/libhtml-mason-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAl7IXzZfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgbePA/+I6pv/Xr2eShlsGEcvwokQ7nPkWcx/cwatnKaL6Dqpt5+dusbD0WDMJc0 34ijzydptFGXplYqeEDzHtJcBlCrWTl7eJiIhvAPjRvUo3JtEBbOgefinuTQu01a avIhoAwRQdHO+COYGPgroEclbdgRWHY0oKhs6PwgsnnS0+X/irOZ5cpD0wxV7xYu mm4wOW7qWYL1PYxec9tatjL56M3yybSYT1evMay9HzwAIEsO2Aor6Z9lpWlPEhbM XHh6yjJ+m601DCcw+sktRe1ncyvKCm1x18ZYW/mTrnxYQ6rDM2TITTbnwU+5vxxh 7RFPm9ey/gepCSWR0U5hV8xg+/Jih2p/Qy/Ow0pfpcU7WoT+DirKSFE2+JyRpBlT qaaEKUMdkemYcwD4u0prbdJMnP6emXEg7otC5X48qE1sYUJTfvRoxx3iaSBp9AYx C5MqFgn/lk4vFxU35kAfWysQDbWW6g62uxE5VCUrZHcFoaBCZi05vnHc27pgXDrZ M89ViLE9DM/i8Gc91dqtfeKVp24HrpsT+fObn1KqnOnfwaLFIJCpquvvHexUzTVS UXjGCnVRrwHNsyF2vNuQgii0qK31eG9HEpvw8+k+P4asztXVqirlohLAfEh2eDc+ 5BRzK+KaL1kd1HxVLlZzcrRTBjMOJ+oJohvvC/9oSxaO9yQOATE= =EAd4 -----END PGP SIGNATURE----- Fri May 21 18:37:03 UTC 2021 I: Checking whether the package is not for us Fri May 21 18:37:03 UTC 2021 I: Starting 1st build on remote node ionos12-i386.debian.net. Fri May 21 18:37:03 UTC 2021 I: Preparing to do remote build '1' on ionos12-i386.debian.net. Fri May 21 18:41:49 UTC 2021 I: Deleting $TMPDIR on ionos12-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri May 21 06:37:06 -12 2021 I: pbuilder-time-stamp: 1621622226 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libhtml-mason-perl_1.59-1.dsc] I: copying [./libhtml-mason-perl_1.59.orig.tar.gz] I: copying [./libhtml-mason-perl_1.59-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.YclZxUh2/trustedkeys.kbx': General error gpgv: Signature made Fri May 22 11:24:38 2020 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libhtml-mason-perl_1.59-1.dsc dpkg-source: info: extracting libhtml-mason-perl in libhtml-mason-perl-1.59 dpkg-source: info: unpacking libhtml-mason-perl_1.59.orig.tar.gz dpkg-source: info: unpacking libhtml-mason-perl_1.59-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01_apachehandler.patch dpkg-source: info: applying 02_cgihandler.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/972/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=10' DISTRIBUTION='' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='821ac91969c94469984c6d208da1e0c9' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='972' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.5KNyr92wxp/pbuilderrc_GKe9 --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.5KNyr92wxp/b1 --logfile b1/build.log libhtml-mason-perl_1.59-1.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://78.137.99.97:3128' I: uname -a Linux ionos12-i386 4.19.0-16-686-pae #1 SMP Debian 4.19.181-1 (2021-03-19) i686 GNU/Linux I: ls -l /bin total 5776 -rwxr-xr-x 1 root root 1367848 Feb 24 08:57 bash -rwxr-xr-x 3 root root 38280 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 17768 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 38824 Sep 22 2020 cat -rwxr-xr-x 1 root root 71624 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 67528 Sep 22 2020 chmod -rwxr-xr-x 1 root root 75752 Sep 22 2020 chown -rwxr-xr-x 1 root root 157960 Sep 22 2020 cp -rwxr-xr-x 1 root root 128724 Dec 10 01:23 dash -rwxr-xr-x 1 root root 124904 Sep 22 2020 date -rwxr-xr-x 1 root root 92172 Sep 22 2020 dd -rwxr-xr-x 1 root root 100752 Sep 22 2020 df -rwxr-xr-x 1 root root 153964 Sep 22 2020 dir -rwxr-xr-x 1 root root 83644 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 34664 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 34664 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 71928 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 30112 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 210488 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 100952 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 21916 Nov 6 2019 hostname -rwxr-xr-x 1 root root 83980 Sep 22 2020 ln -rwxr-xr-x 1 root root 55572 Feb 7 2020 login -rwxr-xr-x 1 root root 153964 Sep 22 2020 ls -rwxr-xr-x 1 root root 153124 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 96328 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 79912 Sep 22 2020 mknod -rwxr-xr-x 1 root root 47048 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 58920 Feb 7 02:38 more -rwsr-xr-x 1 root root 50720 Feb 7 02:38 mount -rwxr-xr-x 1 root root 13856 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 157996 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 38824 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Feb 24 08:57 rbash -> bash -rwxr-xr-x 1 root root 46984 Sep 22 2020 readlink -rwxr-xr-x 1 root root 75720 Sep 22 2020 rm -rwxr-xr-x 1 root root 46984 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 22292 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 125036 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 May 19 21:26 sh -> dash -rwxr-xr-x 1 root root 34696 Sep 22 2020 sleep -rwxr-xr-x 1 root root 83880 Sep 22 2020 stty -rwsr-xr-x 1 root root 79396 Feb 7 02:38 su -rwxr-xr-x 1 root root 34696 Sep 22 2020 sync -rwxr-xr-x 1 root root 602584 Feb 16 21:55 tar -rwxr-xr-x 1 root root 13860 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 108520 Sep 22 2020 touch -rwxr-xr-x 1 root root 34664 Sep 22 2020 true -rwxr-xr-x 1 root root 17768 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 30236 Feb 7 02:38 umount -rwxr-xr-x 1 root root 34664 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 153964 Sep 22 2020 vdir -rwxr-xr-x 1 root root 63024 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/972/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libapache2-mod-perl2, libcache-cache-perl, libcgi-pm-perl, libchi-perl, libclass-container-perl, libexception-class-perl, libhtml-parser-perl, liblog-any-perl, libparams-validate-perl, libtest-deep-perl, libtest-memory-cycle-perl, libtest-pod-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19674 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libapache2-mod-perl2; however: Package libapache2-mod-perl2 is not installed. pbuilder-satisfydepends-dummy depends on libcache-cache-perl; however: Package libcache-cache-perl is not installed. pbuilder-satisfydepends-dummy depends on libcgi-pm-perl; however: Package libcgi-pm-perl is not installed. pbuilder-satisfydepends-dummy depends on libchi-perl; however: Package libchi-perl is not installed. pbuilder-satisfydepends-dummy depends on libclass-container-perl; however: Package libclass-container-perl is not installed. pbuilder-satisfydepends-dummy depends on libexception-class-perl; however: Package libexception-class-perl is not installed. pbuilder-satisfydepends-dummy depends on libhtml-parser-perl; however: Package libhtml-parser-perl is not installed. pbuilder-satisfydepends-dummy depends on liblog-any-perl; however: Package liblog-any-perl is not installed. pbuilder-satisfydepends-dummy depends on libparams-validate-perl; however: Package libparams-validate-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-deep-perl; however: Package libtest-deep-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-memory-cycle-perl; however: Package libtest-memory-cycle-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: apache2-bin{a} autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libapache2-mod-perl2{a} libapr1{a} libaprutil1{a} libaprutil1-dbd-sqlite3{a} libaprutil1-ldap{a} libarchive-zip-perl{a} libb-hooks-op-check-perl{a} libbrotli1{a} libcache-cache-perl{a} libcache-fastmmap-perl{a} libcarp-assert-perl{a} libcgi-pm-perl{a} libchi-perl{a} libclass-container-perl{a} libclass-data-inheritable-perl{a} libclass-load-perl{a} libclass-method-modifiers-perl{a} libcompress-lz4-perl{a} libcompress-snappy-perl{a} libcpanel-json-xs-perl{a} libcurl4{a} libdata-optlist-perl{a} libdata-serializer-perl{a} libdebhelper-perl{a} libdevel-callchecker-perl{a} libdevel-cycle-perl{a} libdevel-stacktrace-perl{a} libdevel-symdump-perl{a} libdigest-jhash-perl{a} libdynaloader-functions-perl{a} libelf1{a} libencode-locale-perl{a} liberror-perl{a} libexception-class-perl{a} libexpat1{a} libexporter-lite-perl{a} libexporter-tiny-perl{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libhash-moreutils-perl{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libicu67{a} libimport-into-perl{a} libio-html-perl{a} libio-socket-ssl-perl{a} libipc-sharelite-perl{a} libjansson4{a} libjson-maybexs-perl{a} libldap-2.4-2{a} liblist-moreutils-perl{a} liblist-moreutils-xs-perl{a} liblog-any-perl{a} liblua5.3-0{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1{a} libmodule-implementation-perl{a} libmodule-runtime-perl{a} libmoo-perl{a} libmoox-types-mooselike-numeric-perl{a} libmoox-types-mooselike-perl{a} libnet-http-perl{a} libnet-ssleay-perl{a} libnghttp2-14{a} libossp-uuid-perl{a} libossp-uuid16{a} libpackage-stash-perl{a} libpadwalker-perl{a} libparams-classify-perl{a} libparams-util-perl{a} libparams-validate-perl{a} libpipeline1{a} libpsl5{a} librole-tiny-perl{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libsigsegv2{a} libsnappy1v5{a} libssh2-1{a} libstrictures-perl{a} libstring-rewriteprefix-perl{a} libsub-exporter-perl{a} libsub-install-perl{a} libsub-override-perl{a} libsub-quote-perl{a} libtask-weaken-perl{a} libtest-deep-perl{a} libtest-memory-cycle-perl{a} libtest-pod-perl{a} libtime-duration-parse-perl{a} libtime-duration-perl{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libxml2{a} m4{a} man-db{a} netbase{a} openssl{a} perl-openssl-defaults{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libapache2-reload-perl libarchive-cpio-perl libbsd-resource-perl libcgi-fast-perl libclass-xsaccessor-perl libclone-perl libdata-dump-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libldap-common libltdl-dev libmail-sendmail-perl libmailtools-perl libnamespace-clean-perl libpackage-stash-xs-perl libsasl2-modules libsub-name-perl lynx publicsuffix wget 0 packages upgraded, 130 newly installed, 0 to remove and 0 not upgraded. Need to get 27.2 MB of archives. After unpacking 92.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main i386 bsdextrautils i386 2.36.1-7 [148 kB] Get: 2 http://deb.debian.org/debian bullseye/main i386 libuchardet0 i386 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main i386 groff-base i386 1.22.4-6 [952 kB] Get: 4 http://deb.debian.org/debian bullseye/main i386 libpipeline1 i386 1.5.3-1 [36.8 kB] Get: 5 http://deb.debian.org/debian bullseye/main i386 man-db i386 2.9.4-2 [1367 kB] Get: 6 http://deb.debian.org/debian bullseye/main i386 netbase all 6.3 [19.9 kB] Get: 7 http://deb.debian.org/debian bullseye/main i386 sensible-utils all 0.0.14 [14.8 kB] Get: 8 http://deb.debian.org/debian bullseye/main i386 openssl i386 1.1.1k-1 [860 kB] Get: 9 http://deb.debian.org/debian bullseye/main i386 ca-certificates all 20210119 [158 kB] Get: 10 http://deb.debian.org/debian bullseye/main i386 libmagic-mgc i386 1:5.39-3 [273 kB] Get: 11 http://deb.debian.org/debian bullseye/main i386 libmagic1 i386 1:5.39-3 [133 kB] Get: 12 http://deb.debian.org/debian bullseye/main i386 file i386 1:5.39-3 [69.0 kB] Get: 13 http://deb.debian.org/debian bullseye/main i386 gettext-base i386 0.21-4 [176 kB] Get: 14 http://deb.debian.org/debian bullseye/main i386 libapr1 i386 1.7.0-6 [115 kB] Get: 15 http://deb.debian.org/debian bullseye/main i386 libexpat1 i386 2.2.10-2 [98.8 kB] Get: 16 http://deb.debian.org/debian bullseye/main i386 libaprutil1 i386 1.6.1-5 [101 kB] Get: 17 http://deb.debian.org/debian bullseye/main i386 libaprutil1-dbd-sqlite3 i386 1.6.1-5 [19.2 kB] Get: 18 http://deb.debian.org/debian bullseye/main i386 libsasl2-modules-db i386 2.1.27+dfsg-2.1 [70.0 kB] Get: 19 http://deb.debian.org/debian bullseye/main i386 libsasl2-2 i386 2.1.27+dfsg-2.1 [110 kB] Get: 20 http://deb.debian.org/debian bullseye/main i386 libldap-2.4-2 i386 2.4.57+dfsg-2 [244 kB] Get: 21 http://deb.debian.org/debian bullseye/main i386 libaprutil1-ldap i386 1.6.1-5 [17.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main i386 libbrotli1 i386 1.0.9-2+b2 [286 kB] Get: 23 http://deb.debian.org/debian bullseye/main i386 libnghttp2-14 i386 1.43.0-1 [85.7 kB] Get: 24 http://deb.debian.org/debian bullseye/main i386 libpsl5 i386 0.21.0-1.2 [57.9 kB] Get: 25 http://deb.debian.org/debian bullseye/main i386 librtmp1 i386 2.4+20151223.gitfa8646d.1-2+b2 [64.3 kB] Get: 26 http://deb.debian.org/debian bullseye/main i386 libssh2-1 i386 1.9.0-2 [164 kB] Get: 27 http://deb.debian.org/debian bullseye/main i386 libcurl4 i386 7.74.0-1.2 [372 kB] Get: 28 http://deb.debian.org/debian bullseye/main i386 libjansson4 i386 2.13.1-1.1 [41.7 kB] Get: 29 http://deb.debian.org/debian bullseye/main i386 liblua5.3-0 i386 5.3.3-1.1+b1 [141 kB] Get: 30 http://deb.debian.org/debian bullseye/main i386 libicu67 i386 67.1-6 [8776 kB] Get: 31 http://deb.debian.org/debian bullseye/main i386 libxml2 i386 2.9.10+dfsg-6.6 [727 kB] Get: 32 http://deb.debian.org/debian bullseye/main i386 apache2-bin i386 2.4.46-4 [1436 kB] Get: 33 http://deb.debian.org/debian bullseye/main i386 libsigsegv2 i386 2.13-1 [35.1 kB] Get: 34 http://deb.debian.org/debian bullseye/main i386 m4 i386 1.4.18-5 [206 kB] Get: 35 http://deb.debian.org/debian bullseye/main i386 autoconf all 2.69-14 [313 kB] Get: 36 http://deb.debian.org/debian bullseye/main i386 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 37 http://deb.debian.org/debian bullseye/main i386 automake all 1:1.16.3-2 [814 kB] Get: 38 http://deb.debian.org/debian bullseye/main i386 autopoint all 0.21-4 [510 kB] Get: 39 http://deb.debian.org/debian bullseye/main i386 libdebhelper-perl all 13.3.4 [189 kB] Get: 40 http://deb.debian.org/debian bullseye/main i386 libtool all 2.4.6-15 [513 kB] Get: 41 http://deb.debian.org/debian bullseye/main i386 dh-autoreconf all 20 [17.1 kB] Get: 42 http://deb.debian.org/debian bullseye/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 43 http://deb.debian.org/debian bullseye/main i386 libsub-override-perl all 0.09-2 [10.2 kB] Get: 44 http://deb.debian.org/debian bullseye/main i386 libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 45 http://deb.debian.org/debian bullseye/main i386 dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 46 http://deb.debian.org/debian bullseye/main i386 libelf1 i386 0.183-1 [171 kB] Get: 47 http://deb.debian.org/debian bullseye/main i386 dwz i386 0.13+20210201-1 [179 kB] Get: 48 http://deb.debian.org/debian bullseye/main i386 gettext i386 0.21-4 [1322 kB] Get: 49 http://deb.debian.org/debian bullseye/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 50 http://deb.debian.org/debian bullseye/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 51 http://deb.debian.org/debian bullseye/main i386 debhelper all 13.3.4 [1049 kB] Get: 52 http://deb.debian.org/debian bullseye/main i386 libdevel-symdump-perl all 2.18-4 [17.5 kB] Get: 53 http://deb.debian.org/debian bullseye/main i386 liburi-perl all 5.08-1 [90.6 kB] Get: 54 http://deb.debian.org/debian bullseye/main i386 libencode-locale-perl all 1.05-1.1 [13.2 kB] Get: 55 http://deb.debian.org/debian bullseye/main i386 libtimedate-perl all 2.3300-2 [39.3 kB] Get: 56 http://deb.debian.org/debian bullseye/main i386 libhttp-date-perl all 6.05-1 [10.4 kB] Get: 57 http://deb.debian.org/debian bullseye/main i386 libfile-listing-perl all 6.14-1 [12.4 kB] Get: 58 http://deb.debian.org/debian bullseye/main i386 libhtml-tagset-perl all 3.20-4 [13.0 kB] Get: 59 http://deb.debian.org/debian bullseye/main i386 libhtml-parser-perl i386 3.75-1+b1 [106 kB] Get: 60 http://deb.debian.org/debian bullseye/main i386 libhtml-tree-perl all 5.07-2 [213 kB] Get: 61 http://deb.debian.org/debian bullseye/main i386 libio-html-perl all 1.004-2 [16.1 kB] Get: 62 http://deb.debian.org/debian bullseye/main i386 liblwp-mediatypes-perl all 6.04-1 [19.9 kB] Get: 63 http://deb.debian.org/debian bullseye/main i386 libhttp-message-perl all 6.28-1 [79.6 kB] Get: 64 http://deb.debian.org/debian bullseye/main i386 libhttp-cookies-perl all 6.10-1 [19.6 kB] Get: 65 http://deb.debian.org/debian bullseye/main i386 libhttp-negotiate-perl all 6.01-1 [12.8 kB] Get: 66 http://deb.debian.org/debian bullseye/main i386 perl-openssl-defaults i386 5 [7360 B] Get: 67 http://deb.debian.org/debian bullseye/main i386 libnet-ssleay-perl i386 1.88-3+b1 [328 kB] Get: 68 http://deb.debian.org/debian bullseye/main i386 libio-socket-ssl-perl all 2.069-1 [215 kB] Get: 69 http://deb.debian.org/debian bullseye/main i386 libnet-http-perl all 6.20-1 [25.1 kB] Get: 70 http://deb.debian.org/debian bullseye/main i386 liblwp-protocol-https-perl all 6.10-1 [12.2 kB] Get: 71 http://deb.debian.org/debian bullseye/main i386 libtry-tiny-perl all 0.30-1 [23.3 kB] Get: 72 http://deb.debian.org/debian bullseye/main i386 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 73 http://deb.debian.org/debian bullseye/main i386 libwww-perl all 6.52-1 [192 kB] Get: 74 http://deb.debian.org/debian bullseye/main i386 libapache2-mod-perl2 i386 2.0.11-4 [902 kB] Get: 75 http://deb.debian.org/debian bullseye/main i386 libb-hooks-op-check-perl i386 0.22-1+b3 [11.4 kB] Get: 76 http://deb.debian.org/debian bullseye/main i386 liberror-perl all 0.17029-1 [31.0 kB] Get: 77 http://deb.debian.org/debian bullseye/main i386 libipc-sharelite-perl i386 0.17-4+b5 [25.3 kB] Get: 78 http://deb.debian.org/debian bullseye/main i386 libcache-cache-perl all 1.08-2 [76.6 kB] Get: 79 http://deb.debian.org/debian bullseye/main i386 libcompress-lz4-perl i386 0.25+ds-1+b3 [11.9 kB] Get: 80 http://deb.debian.org/debian bullseye/main i386 libsnappy1v5 i386 1.1.8-1 [19.0 kB] Get: 81 http://deb.debian.org/debian bullseye/main i386 libcompress-snappy-perl i386 0.24+ds-2+b2 [10.9 kB] Get: 82 http://deb.debian.org/debian bullseye/main i386 libcache-fastmmap-perl i386 1.56-1 [52.5 kB] Get: 83 http://deb.debian.org/debian bullseye/main i386 libcarp-assert-perl all 0.21-1.1 [17.7 kB] Get: 84 http://deb.debian.org/debian bullseye/main i386 libcgi-pm-perl all 4.51-1 [224 kB] Get: 85 http://deb.debian.org/debian bullseye/main i386 libparams-util-perl i386 1.102-1+b1 [26.3 kB] Get: 86 http://deb.debian.org/debian bullseye/main i386 libsub-install-perl all 0.928-1.1 [10.8 kB] Get: 87 http://deb.debian.org/debian bullseye/main i386 libdata-optlist-perl all 0.110-1.1 [10.8 kB] Get: 88 http://deb.debian.org/debian bullseye/main i386 libdynaloader-functions-perl all 0.003-1.1 [12.7 kB] Get: 89 http://deb.debian.org/debian bullseye/main i386 libdevel-callchecker-perl i386 0.008-1+b2 [15.9 kB] Get: 90 http://deb.debian.org/debian bullseye/main i386 libparams-classify-perl i386 0.015-1+b3 [26.4 kB] Get: 91 http://deb.debian.org/debian bullseye/main i386 libmodule-runtime-perl all 0.016-1 [19.4 kB] Get: 92 http://deb.debian.org/debian bullseye/main i386 libmodule-implementation-perl all 0.09-1.1 [12.4 kB] Get: 93 http://deb.debian.org/debian bullseye/main i386 libpackage-stash-perl all 0.39-1 [21.9 kB] Get: 94 http://deb.debian.org/debian bullseye/main i386 libclass-load-perl all 0.25-1 [16.1 kB] Get: 95 http://deb.debian.org/debian bullseye/main i386 libdata-serializer-perl all 0.65-1 [67.6 kB] Get: 96 http://deb.debian.org/debian bullseye/main i386 libdigest-jhash-perl i386 0.10-1+b5 [14.0 kB] Get: 97 http://deb.debian.org/debian bullseye/main i386 libhash-moreutils-perl all 0.06-1 [11.0 kB] Get: 98 http://deb.debian.org/debian bullseye/main i386 libcpanel-json-xs-perl i386 4.25-1+b1 [134 kB] Get: 99 http://deb.debian.org/debian bullseye/main i386 libjson-maybexs-perl all 1.004003-1 [13.1 kB] Get: 100 http://deb.debian.org/debian bullseye/main i386 libexporter-tiny-perl all 1.002002-1 [37.8 kB] Get: 101 http://deb.debian.org/debian bullseye/main i386 liblist-moreutils-xs-perl i386 0.430-2 [41.1 kB] Get: 102 http://deb.debian.org/debian bullseye/main i386 liblist-moreutils-perl all 0.430-2 [46.9 kB] Get: 103 http://deb.debian.org/debian bullseye/main i386 liblog-any-perl all 1.709-1 [73.5 kB] Get: 104 http://deb.debian.org/debian bullseye/main i386 libclass-method-modifiers-perl all 2.13-1 [19.2 kB] Get: 105 http://deb.debian.org/debian bullseye/main i386 libimport-into-perl all 1.002005-1 [11.6 kB] Get: 106 http://deb.debian.org/debian bullseye/main i386 librole-tiny-perl all 2.002004-1 [21.4 kB] Get: 107 http://deb.debian.org/debian bullseye/main i386 libstrictures-perl all 2.000006-1 [18.6 kB] Get: 108 http://deb.debian.org/debian bullseye/main i386 libsub-quote-perl all 2.006006-1 [21.0 kB] Get: 109 http://deb.debian.org/debian bullseye/main i386 libmoo-perl all 2.004004-1 [59.9 kB] Get: 110 http://deb.debian.org/debian bullseye/main i386 libmoox-types-mooselike-perl all 0.29-1.1 [18.1 kB] Get: 111 http://deb.debian.org/debian bullseye/main i386 libmoox-types-mooselike-numeric-perl all 1.03-1 [5260 B] Get: 112 http://deb.debian.org/debian bullseye/main i386 libossp-uuid16 i386 1.6.2-1.5+b9 [39.9 kB] Get: 113 http://deb.debian.org/debian bullseye/main i386 libossp-uuid-perl i386 1.6.2-1.5+b9 [29.5 kB] Get: 114 http://deb.debian.org/debian bullseye/main i386 libsub-exporter-perl all 0.987-1 [47.2 kB] Get: 115 http://deb.debian.org/debian bullseye/main i386 libstring-rewriteprefix-perl all 0.008-1 [6980 B] Get: 116 http://deb.debian.org/debian bullseye/main i386 libtask-weaken-perl all 1.06-1 [9252 B] Get: 117 http://deb.debian.org/debian bullseye/main i386 libexporter-lite-perl all 0.08-1 [11.1 kB] Get: 118 http://deb.debian.org/debian bullseye/main i386 libtime-duration-perl all 1.21-1 [13.7 kB] Get: 119 http://deb.debian.org/debian bullseye/main i386 libtime-duration-parse-perl all 0.15-1 [8208 B] Get: 120 http://deb.debian.org/debian bullseye/main i386 libchi-perl all 0.60-4 [110 kB] Get: 121 http://deb.debian.org/debian bullseye/main i386 libparams-validate-perl i386 1.30-1+b1 [71.4 kB] Get: 122 http://deb.debian.org/debian bullseye/main i386 libclass-container-perl all 0.13-1 [23.5 kB] Get: 123 http://deb.debian.org/debian bullseye/main i386 libclass-data-inheritable-perl all 0.08-3 [8588 B] Get: 124 http://deb.debian.org/debian bullseye/main i386 libdevel-cycle-perl all 1.12-1 [12.1 kB] Get: 125 http://deb.debian.org/debian bullseye/main i386 libdevel-stacktrace-perl all 2.0400-1 [28.6 kB] Get: 126 http://deb.debian.org/debian bullseye/main i386 libexception-class-perl all 1.44-1 [32.3 kB] Get: 127 http://deb.debian.org/debian bullseye/main i386 libpadwalker-perl i386 2.5-1+b1 [20.8 kB] Get: 128 http://deb.debian.org/debian bullseye/main i386 libtest-deep-perl all 1.130-1 [49.3 kB] Get: 129 http://deb.debian.org/debian bullseye/main i386 libtest-memory-cycle-perl all 1.06-1 [10.9 kB] Get: 130 http://deb.debian.org/debian bullseye/main i386 libtest-pod-perl all 1.52-1 [14.2 kB] Fetched 27.2 MB in 3s (9608 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19674 files and directories currently installed.) Preparing to unpack .../000-bsdextrautils_2.36.1-7_i386.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../001-libuchardet0_0.0.7-1_i386.deb ... Unpacking libuchardet0:i386 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../002-groff-base_1.22.4-6_i386.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../003-libpipeline1_1.5.3-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../004-man-db_2.9.4-2_i386.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package netbase. Preparing to unpack .../005-netbase_6.3_all.deb ... Unpacking netbase (6.3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../006-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package openssl. Preparing to unpack .../007-openssl_1.1.1k-1_i386.deb ... Unpacking openssl (1.1.1k-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../008-ca-certificates_20210119_all.deb ... Unpacking ca-certificates (20210119) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../009-libmagic-mgc_1%3a5.39-3_i386.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../010-libmagic1_1%3a5.39-3_i386.deb ... Unpacking libmagic1:i386 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../011-file_1%3a5.39-3_i386.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../012-gettext-base_0.21-4_i386.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libapr1:i386. Preparing to unpack .../013-libapr1_1.7.0-6_i386.deb ... Unpacking libapr1:i386 (1.7.0-6) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../014-libexpat1_2.2.10-2_i386.deb ... Unpacking libexpat1:i386 (2.2.10-2) ... Selecting previously unselected package libaprutil1:i386. Preparing to unpack .../015-libaprutil1_1.6.1-5_i386.deb ... Unpacking libaprutil1:i386 (1.6.1-5) ... Selecting previously unselected package libaprutil1-dbd-sqlite3:i386. Preparing to unpack .../016-libaprutil1-dbd-sqlite3_1.6.1-5_i386.deb ... Unpacking libaprutil1-dbd-sqlite3:i386 (1.6.1-5) ... Selecting previously unselected package libsasl2-modules-db:i386. Preparing to unpack .../017-libsasl2-modules-db_2.1.27+dfsg-2.1_i386.deb ... Unpacking libsasl2-modules-db:i386 (2.1.27+dfsg-2.1) ... Selecting previously unselected package libsasl2-2:i386. Preparing to unpack .../018-libsasl2-2_2.1.27+dfsg-2.1_i386.deb ... Unpacking libsasl2-2:i386 (2.1.27+dfsg-2.1) ... Selecting previously unselected package libldap-2.4-2:i386. Preparing to unpack .../019-libldap-2.4-2_2.4.57+dfsg-2_i386.deb ... Unpacking libldap-2.4-2:i386 (2.4.57+dfsg-2) ... Selecting previously unselected package libaprutil1-ldap:i386. Preparing to unpack .../020-libaprutil1-ldap_1.6.1-5_i386.deb ... Unpacking libaprutil1-ldap:i386 (1.6.1-5) ... Selecting previously unselected package libbrotli1:i386. Preparing to unpack .../021-libbrotli1_1.0.9-2+b2_i386.deb ... Unpacking libbrotli1:i386 (1.0.9-2+b2) ... Selecting previously unselected package libnghttp2-14:i386. Preparing to unpack .../022-libnghttp2-14_1.43.0-1_i386.deb ... Unpacking libnghttp2-14:i386 (1.43.0-1) ... Selecting previously unselected package libpsl5:i386. Preparing to unpack .../023-libpsl5_0.21.0-1.2_i386.deb ... Unpacking libpsl5:i386 (0.21.0-1.2) ... Selecting previously unselected package librtmp1:i386. Preparing to unpack .../024-librtmp1_2.4+20151223.gitfa8646d.1-2+b2_i386.deb ... Unpacking librtmp1:i386 (2.4+20151223.gitfa8646d.1-2+b2) ... Selecting previously unselected package libssh2-1:i386. Preparing to unpack .../025-libssh2-1_1.9.0-2_i386.deb ... Unpacking libssh2-1:i386 (1.9.0-2) ... Selecting previously unselected package libcurl4:i386. Preparing to unpack .../026-libcurl4_7.74.0-1.2_i386.deb ... Unpacking libcurl4:i386 (7.74.0-1.2) ... Selecting previously unselected package libjansson4:i386. Preparing to unpack .../027-libjansson4_2.13.1-1.1_i386.deb ... Unpacking libjansson4:i386 (2.13.1-1.1) ... Selecting previously unselected package liblua5.3-0:i386. Preparing to unpack .../028-liblua5.3-0_5.3.3-1.1+b1_i386.deb ... Unpacking liblua5.3-0:i386 (5.3.3-1.1+b1) ... Selecting previously unselected package libicu67:i386. Preparing to unpack .../029-libicu67_67.1-6_i386.deb ... Unpacking libicu67:i386 (67.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../030-libxml2_2.9.10+dfsg-6.6_i386.deb ... Unpacking libxml2:i386 (2.9.10+dfsg-6.6) ... Selecting previously unselected package apache2-bin. Preparing to unpack .../031-apache2-bin_2.4.46-4_i386.deb ... Unpacking apache2-bin (2.4.46-4) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../032-libsigsegv2_2.13-1_i386.deb ... Unpacking libsigsegv2:i386 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../033-m4_1.4.18-5_i386.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../034-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../035-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../036-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../037-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../038-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../039-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../040-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../041-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../042-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../043-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../044-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../045-libelf1_0.183-1_i386.deb ... Unpacking libelf1:i386 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../046-dwz_0.13+20210201-1_i386.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package gettext. Preparing to unpack .../047-gettext_0.21-4_i386.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../048-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../049-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../050-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../051-libdevel-symdump-perl_2.18-4_all.deb ... Unpacking libdevel-symdump-perl (2.18-4) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../052-liburi-perl_5.08-1_all.deb ... Unpacking liburi-perl (5.08-1) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../053-libencode-locale-perl_1.05-1.1_all.deb ... Unpacking libencode-locale-perl (1.05-1.1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../054-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../055-libhttp-date-perl_6.05-1_all.deb ... Unpacking libhttp-date-perl (6.05-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../056-libfile-listing-perl_6.14-1_all.deb ... Unpacking libfile-listing-perl (6.14-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../057-libhtml-tagset-perl_3.20-4_all.deb ... Unpacking libhtml-tagset-perl (3.20-4) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../058-libhtml-parser-perl_3.75-1+b1_i386.deb ... Unpacking libhtml-parser-perl (3.75-1+b1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../059-libhtml-tree-perl_5.07-2_all.deb ... Unpacking libhtml-tree-perl (5.07-2) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../060-libio-html-perl_1.004-2_all.deb ... Unpacking libio-html-perl (1.004-2) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../061-liblwp-mediatypes-perl_6.04-1_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-1) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../062-libhttp-message-perl_6.28-1_all.deb ... Unpacking libhttp-message-perl (6.28-1) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../063-libhttp-cookies-perl_6.10-1_all.deb ... Unpacking libhttp-cookies-perl (6.10-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../064-libhttp-negotiate-perl_6.01-1_all.deb ... Unpacking libhttp-negotiate-perl (6.01-1) ... Selecting previously unselected package perl-openssl-defaults:i386. Preparing to unpack .../065-perl-openssl-defaults_5_i386.deb ... Unpacking perl-openssl-defaults:i386 (5) ... Selecting previously unselected package libnet-ssleay-perl. Preparing to unpack .../066-libnet-ssleay-perl_1.88-3+b1_i386.deb ... Unpacking libnet-ssleay-perl (1.88-3+b1) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../067-libio-socket-ssl-perl_2.069-1_all.deb ... Unpacking libio-socket-ssl-perl (2.069-1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../068-libnet-http-perl_6.20-1_all.deb ... Unpacking libnet-http-perl (6.20-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../069-liblwp-protocol-https-perl_6.10-1_all.deb ... Unpacking liblwp-protocol-https-perl (6.10-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../070-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../071-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../072-libwww-perl_6.52-1_all.deb ... Unpacking libwww-perl (6.52-1) ... Selecting previously unselected package libapache2-mod-perl2. Preparing to unpack .../073-libapache2-mod-perl2_2.0.11-4_i386.deb ... Unpacking libapache2-mod-perl2 (2.0.11-4) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../074-libb-hooks-op-check-perl_0.22-1+b3_i386.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b3) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../075-liberror-perl_0.17029-1_all.deb ... Unpacking liberror-perl (0.17029-1) ... Selecting previously unselected package libipc-sharelite-perl. Preparing to unpack .../076-libipc-sharelite-perl_0.17-4+b5_i386.deb ... Unpacking libipc-sharelite-perl (0.17-4+b5) ... Selecting previously unselected package libcache-cache-perl. Preparing to unpack .../077-libcache-cache-perl_1.08-2_all.deb ... Unpacking libcache-cache-perl (1.08-2) ... Selecting previously unselected package libcompress-lz4-perl. Preparing to unpack .../078-libcompress-lz4-perl_0.25+ds-1+b3_i386.deb ... Unpacking libcompress-lz4-perl (0.25+ds-1+b3) ... Selecting previously unselected package libsnappy1v5:i386. Preparing to unpack .../079-libsnappy1v5_1.1.8-1_i386.deb ... Unpacking libsnappy1v5:i386 (1.1.8-1) ... Selecting previously unselected package libcompress-snappy-perl. Preparing to unpack .../080-libcompress-snappy-perl_0.24+ds-2+b2_i386.deb ... Unpacking libcompress-snappy-perl (0.24+ds-2+b2) ... Selecting previously unselected package libcache-fastmmap-perl. Preparing to unpack .../081-libcache-fastmmap-perl_1.56-1_i386.deb ... Unpacking libcache-fastmmap-perl (1.56-1) ... Selecting previously unselected package libcarp-assert-perl. Preparing to unpack .../082-libcarp-assert-perl_0.21-1.1_all.deb ... Unpacking libcarp-assert-perl (0.21-1.1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../083-libcgi-pm-perl_4.51-1_all.deb ... Unpacking libcgi-pm-perl (4.51-1) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../084-libparams-util-perl_1.102-1+b1_i386.deb ... Unpacking libparams-util-perl (1.102-1+b1) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../085-libsub-install-perl_0.928-1.1_all.deb ... Unpacking libsub-install-perl (0.928-1.1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../086-libdata-optlist-perl_0.110-1.1_all.deb ... Unpacking libdata-optlist-perl (0.110-1.1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../087-libdynaloader-functions-perl_0.003-1.1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1.1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../088-libdevel-callchecker-perl_0.008-1+b2_i386.deb ... Unpacking libdevel-callchecker-perl (0.008-1+b2) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../089-libparams-classify-perl_0.015-1+b3_i386.deb ... Unpacking libparams-classify-perl (0.015-1+b3) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../090-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libmodule-implementation-perl. Preparing to unpack .../091-libmodule-implementation-perl_0.09-1.1_all.deb ... Unpacking libmodule-implementation-perl (0.09-1.1) ... Selecting previously unselected package libpackage-stash-perl. Preparing to unpack .../092-libpackage-stash-perl_0.39-1_all.deb ... Unpacking libpackage-stash-perl (0.39-1) ... Selecting previously unselected package libclass-load-perl. Preparing to unpack .../093-libclass-load-perl_0.25-1_all.deb ... Unpacking libclass-load-perl (0.25-1) ... Selecting previously unselected package libdata-serializer-perl. Preparing to unpack .../094-libdata-serializer-perl_0.65-1_all.deb ... Unpacking libdata-serializer-perl (0.65-1) ... Selecting previously unselected package libdigest-jhash-perl. Preparing to unpack .../095-libdigest-jhash-perl_0.10-1+b5_i386.deb ... Unpacking libdigest-jhash-perl (0.10-1+b5) ... Selecting previously unselected package libhash-moreutils-perl. Preparing to unpack .../096-libhash-moreutils-perl_0.06-1_all.deb ... Unpacking libhash-moreutils-perl (0.06-1) ... Selecting previously unselected package libcpanel-json-xs-perl. Preparing to unpack .../097-libcpanel-json-xs-perl_4.25-1+b1_i386.deb ... Unpacking libcpanel-json-xs-perl (4.25-1+b1) ... Selecting previously unselected package libjson-maybexs-perl. Preparing to unpack .../098-libjson-maybexs-perl_1.004003-1_all.deb ... Unpacking libjson-maybexs-perl (1.004003-1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../099-libexporter-tiny-perl_1.002002-1_all.deb ... Unpacking libexporter-tiny-perl (1.002002-1) ... Selecting previously unselected package liblist-moreutils-xs-perl. Preparing to unpack .../100-liblist-moreutils-xs-perl_0.430-2_i386.deb ... Unpacking liblist-moreutils-xs-perl (0.430-2) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../101-liblist-moreutils-perl_0.430-2_all.deb ... Unpacking liblist-moreutils-perl (0.430-2) ... Selecting previously unselected package liblog-any-perl. Preparing to unpack .../102-liblog-any-perl_1.709-1_all.deb ... Unpacking liblog-any-perl (1.709-1) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../103-libclass-method-modifiers-perl_2.13-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.13-1) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../104-libimport-into-perl_1.002005-1_all.deb ... Unpacking libimport-into-perl (1.002005-1) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../105-librole-tiny-perl_2.002004-1_all.deb ... Unpacking librole-tiny-perl (2.002004-1) ... Selecting previously unselected package libstrictures-perl. Preparing to unpack .../106-libstrictures-perl_2.000006-1_all.deb ... Unpacking libstrictures-perl (2.000006-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../107-libsub-quote-perl_2.006006-1_all.deb ... Unpacking libsub-quote-perl (2.006006-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../108-libmoo-perl_2.004004-1_all.deb ... Unpacking libmoo-perl (2.004004-1) ... Selecting previously unselected package libmoox-types-mooselike-perl. Preparing to unpack .../109-libmoox-types-mooselike-perl_0.29-1.1_all.deb ... Unpacking libmoox-types-mooselike-perl (0.29-1.1) ... Selecting previously unselected package libmoox-types-mooselike-numeric-perl. Preparing to unpack .../110-libmoox-types-mooselike-numeric-perl_1.03-1_all.deb ... Unpacking libmoox-types-mooselike-numeric-perl (1.03-1) ... Selecting previously unselected package libossp-uuid16:i386. Preparing to unpack .../111-libossp-uuid16_1.6.2-1.5+b9_i386.deb ... Unpacking libossp-uuid16:i386 (1.6.2-1.5+b9) ... Selecting previously unselected package libossp-uuid-perl. Preparing to unpack .../112-libossp-uuid-perl_1.6.2-1.5+b9_i386.deb ... Unpacking libossp-uuid-perl (1.6.2-1.5+b9) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../113-libsub-exporter-perl_0.987-1_all.deb ... Unpacking libsub-exporter-perl (0.987-1) ... Selecting previously unselected package libstring-rewriteprefix-perl. Preparing to unpack .../114-libstring-rewriteprefix-perl_0.008-1_all.deb ... Unpacking libstring-rewriteprefix-perl (0.008-1) ... Selecting previously unselected package libtask-weaken-perl. Preparing to unpack .../115-libtask-weaken-perl_1.06-1_all.deb ... Unpacking libtask-weaken-perl (1.06-1) ... Selecting previously unselected package libexporter-lite-perl. Preparing to unpack .../116-libexporter-lite-perl_0.08-1_all.deb ... Unpacking libexporter-lite-perl (0.08-1) ... Selecting previously unselected package libtime-duration-perl. Preparing to unpack .../117-libtime-duration-perl_1.21-1_all.deb ... Unpacking libtime-duration-perl (1.21-1) ... Selecting previously unselected package libtime-duration-parse-perl. Preparing to unpack .../118-libtime-duration-parse-perl_0.15-1_all.deb ... Unpacking libtime-duration-parse-perl (0.15-1) ... Selecting previously unselected package libchi-perl. Preparing to unpack .../119-libchi-perl_0.60-4_all.deb ... Unpacking libchi-perl (0.60-4) ... Selecting previously unselected package libparams-validate-perl:i386. Preparing to unpack .../120-libparams-validate-perl_1.30-1+b1_i386.deb ... Unpacking libparams-validate-perl:i386 (1.30-1+b1) ... Selecting previously unselected package libclass-container-perl. Preparing to unpack .../121-libclass-container-perl_0.13-1_all.deb ... Unpacking libclass-container-perl (0.13-1) ... Selecting previously unselected package libclass-data-inheritable-perl. Preparing to unpack .../122-libclass-data-inheritable-perl_0.08-3_all.deb ... Unpacking libclass-data-inheritable-perl (0.08-3) ... Selecting previously unselected package libdevel-cycle-perl. Preparing to unpack .../123-libdevel-cycle-perl_1.12-1_all.deb ... Unpacking libdevel-cycle-perl (1.12-1) ... Selecting previously unselected package libdevel-stacktrace-perl. Preparing to unpack .../124-libdevel-stacktrace-perl_2.0400-1_all.deb ... Unpacking libdevel-stacktrace-perl (2.0400-1) ... Selecting previously unselected package libexception-class-perl. Preparing to unpack .../125-libexception-class-perl_1.44-1_all.deb ... Unpacking libexception-class-perl (1.44-1) ... Selecting previously unselected package libpadwalker-perl. Preparing to unpack .../126-libpadwalker-perl_2.5-1+b1_i386.deb ... Unpacking libpadwalker-perl (2.5-1+b1) ... Selecting previously unselected package libtest-deep-perl. Preparing to unpack .../127-libtest-deep-perl_1.130-1_all.deb ... Unpacking libtest-deep-perl (1.130-1) ... Selecting previously unselected package libtest-memory-cycle-perl. Preparing to unpack .../128-libtest-memory-cycle-perl_1.06-1_all.deb ... Unpacking libtest-memory-cycle-perl (1.06-1) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../129-libtest-pod-perl_1.52-1_all.deb ... Unpacking libtest-pod-perl (1.52-1) ... Setting up libexpat1:i386 (2.2.10-2) ... Setting up libpipeline1:i386 (1.5.3-1) ... Setting up libdevel-cycle-perl (1.12-1) ... Setting up libpsl5:i386 (0.21.0-1.2) ... Setting up libtask-weaken-perl (1.06-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:i386 (67.1-6) ... Setting up libdynaloader-functions-perl (0.003-1.1) ... Setting up libtest-deep-perl (1.130-1) ... Setting up libclass-method-modifiers-perl (2.13-1) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libcpanel-json-xs-perl (4.25-1+b1) ... Setting up libhtml-tagset-perl (3.20-4) ... Setting up liblog-any-perl (1.709-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libbrotli1:i386 (1.0.9-2+b2) ... Setting up libipc-sharelite-perl (0.17-4+b5) ... Setting up liblwp-mediatypes-perl (6.04-1) ... Setting up libtest-pod-perl (1.52-1) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up libnghttp2-14:i386 (1.43.0-1) ... Setting up libmagic1:i386 (1:5.39-3) ... Setting up libapr1:i386 (1.7.0-6) ... Setting up libdigest-jhash-perl (0.10-1+b5) ... Setting up perl-openssl-defaults:i386 (5) ... Setting up libhash-moreutils-perl (0.06-1) ... Setting up gettext-base (0.21-4) ... Setting up libpadwalker-perl (2.5-1+b1) ... Setting up libencode-locale-perl (1.05-1.1) ... Setting up file (1:5.39-3) ... Setting up libossp-uuid16:i386 (1.6.2-1.5+b9) ... Setting up libcompress-lz4-perl (0.25+ds-1+b3) ... Setting up libsub-install-perl (0.928-1.1) ... Setting up libjansson4:i386 (2.13.1-1.1) ... Setting up libsnappy1v5:i386 (1.1.8-1) ... Setting up libsasl2-modules-db:i386 (2.1.27+dfsg-2.1) ... Setting up liberror-perl (0.17029-1) ... Setting up libjson-maybexs-perl (1.004003-1) ... Setting up libtest-memory-cycle-perl (1.06-1) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libclass-data-inheritable-perl (0.08-3) ... Setting up librtmp1:i386 (2.4+20151223.gitfa8646d.1-2+b2) ... Setting up libsigsegv2:i386 (2.13-1) ... Setting up libio-html-perl (1.004-2) ... Setting up autopoint (0.21-4) ... Setting up libb-hooks-op-check-perl (0.22-1+b3) ... Setting up liblist-moreutils-xs-perl (0.430-2) ... Setting up libparams-util-perl (1.102-1+b1) ... Setting up libsasl2-2:i386 (2.1.27+dfsg-2.1) ... Setting up libtime-duration-perl (1.21-1) ... Setting up libtimedate-perl (2.3300-2) ... Setting up libexporter-lite-perl (0.08-1) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:i386 (0.0.7-1) ... Setting up liblua5.3-0:i386 (5.3.3-1.1+b1) ... Setting up librole-tiny-perl (2.002004-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libssh2-1:i386 (1.9.0-2) ... Setting up netbase (6.3) ... Setting up libstrictures-perl (2.000006-1) ... Setting up libsub-quote-perl (2.006006-1) ... Setting up libdevel-stacktrace-perl (2.0400-1) ... Setting up libdevel-symdump-perl (2.18-4) ... Setting up libdata-serializer-perl (0.65-1) ... Setting up libexporter-tiny-perl (1.002002-1) ... Setting up openssl (1.1.1k-1) ... Setting up libelf1:i386 (0.183-1) ... Setting up libcompress-snappy-perl (0.24+ds-2+b2) ... Setting up libxml2:i386 (2.9.10+dfsg-6.6) ... Setting up liburi-perl (5.08-1) ... Setting up libcarp-assert-perl (0.21-1.1) ... Setting up libaprutil1:i386 (1.6.1-5) ... Setting up libtime-duration-parse-perl (0.15-1) ... Setting up libnet-ssleay-perl (1.88-3+b1) ... Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up libhttp-date-perl (6.05-1) ... Setting up gettext (0.21-4) ... Setting up libossp-uuid-perl (1.6.2-1.5+b9) ... Setting up libfile-listing-perl (6.14-1) ... Setting up libcache-cache-perl (1.08-2) ... Setting up libtool (2.4.6-15) ... Setting up liblist-moreutils-perl (0.430-2) ... Setting up libldap-2.4-2:i386 (2.4.57+dfsg-2) ... Setting up libnet-http-perl (6.20-1) ... Setting up m4 (1.4.18-5) ... Setting up libexception-class-perl (1.44-1) ... Setting up libaprutil1-ldap:i386 (1.6.1-5) ... Setting up libaprutil1-dbd-sqlite3:i386 (1.6.1-5) ... Setting up libdevel-callchecker-perl (0.008-1+b2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libcache-fastmmap-perl (1.56-1) ... Setting up ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 129 added, 0 removed; done. Setting up libdata-optlist-perl (0.110-1.1) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up libhtml-parser-perl (3.75-1+b1) ... Setting up libcurl4:i386 (7.74.0-1.2) ... Setting up libio-socket-ssl-perl (2.069-1) ... Setting up libsub-exporter-perl (0.987-1) ... Setting up libhttp-message-perl (6.28-1) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libhttp-negotiate-perl (6.01-1) ... Setting up libhttp-cookies-perl (6.10-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libhtml-tree-perl (5.07-2) ... Setting up libparams-classify-perl (0.015-1+b3) ... Setting up libcgi-pm-perl (4.51-1) ... Setting up apache2-bin (2.4.46-4) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up libstring-rewriteprefix-perl (0.008-1) ... Setting up libmodule-implementation-perl (0.09-1.1) ... Setting up libpackage-stash-perl (0.39-1) ... Setting up libimport-into-perl (1.002005-1) ... Setting up libmoo-perl (2.004004-1) ... Setting up debhelper (13.3.4) ... Setting up libclass-load-perl (0.25-1) ... Setting up libmoox-types-mooselike-perl (0.29-1.1) ... Setting up libparams-validate-perl:i386 (1.30-1+b1) ... Setting up libmoox-types-mooselike-numeric-perl (1.03-1) ... Setting up libclass-container-perl (0.13-1) ... Setting up libchi-perl (0.60-4) ... Setting up liblwp-protocol-https-perl (6.10-1) ... Setting up libwww-perl (6.52-1) ... Setting up libapache2-mod-perl2 (2.0.11-4) ... Processing triggers for libc-bin (2.31-12) ... Processing triggers for ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libhtml-mason-perl-1.59/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libhtml-mason-perl dpkg-buildpackage: info: source version 1:1.59-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/libhtml-mason-perl-1.59=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libhtml-mason-perl-1.59=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for HTML::Mason Writing MYMETA.yml and MYMETA.json dh_auto_build make -j10 make[1]: Entering directory '/build/libhtml-mason-perl-1.59' cp lib/HTML/Mason/Exceptions.pm blib/lib/HTML/Mason/Exceptions.pm cp lib/HTML/Mason/Devel.pod blib/lib/HTML/Mason/Devel.pod cp lib/HTML/Mason/Compiler.pm blib/lib/HTML/Mason/Compiler.pm cp lib/HTML/Mason.pm blib/lib/HTML/Mason.pm cp lib/HTML/Mason/Plugin.pm blib/lib/HTML/Mason/Plugin.pm cp lib/HTML/Mason/Resolver/File.pm blib/lib/HTML/Mason/Resolver/File.pm cp lib/HTML/Mason/Params.pod blib/lib/HTML/Mason/Params.pod cp lib/HTML/Mason/FakeApache.pm blib/lib/HTML/Mason/FakeApache.pm cp lib/HTML/Mason/ApacheHandler.pm blib/lib/HTML/Mason/ApacheHandler.pm cp lib/HTML/Mason/Component/Subcomponent.pm blib/lib/HTML/Mason/Component/Subcomponent.pm cp lib/HTML/Mason/Plugin/Context.pm blib/lib/HTML/Mason/Plugin/Context.pm cp lib/HTML/Mason/Utils.pm blib/lib/HTML/Mason/Utils.pm cp lib/HTML/Mason/MethodMaker.pm blib/lib/HTML/Mason/MethodMaker.pm cp lib/HTML/Mason/Lexer.pm blib/lib/HTML/Mason/Lexer.pm cp lib/HTML/Mason/Interp.pm blib/lib/HTML/Mason/Interp.pm cp lib/HTML/Mason/Handler.pm blib/lib/HTML/Mason/Handler.pm cp lib/HTML/Mason/FAQ.pod blib/lib/HTML/Mason/FAQ.pod cp lib/HTML/Mason/Resolver.pm blib/lib/HTML/Mason/Resolver.pm cp lib/HTML/Mason/Tools.pm blib/lib/HTML/Mason/Tools.pm cp lib/HTML/Mason/Subclassing.pod blib/lib/HTML/Mason/Subclassing.pod cp lib/HTML/Mason/Component.pm blib/lib/HTML/Mason/Component.pm cp lib/HTML/Mason/Escapes.pm blib/lib/HTML/Mason/Escapes.pm cp lib/HTML/Mason/Request.pm blib/lib/HTML/Mason/Request.pm cp lib/HTML/Mason/Tests.pm blib/lib/HTML/Mason/Tests.pm cp lib/HTML/Mason/ComponentSource.pm blib/lib/HTML/Mason/ComponentSource.pm cp lib/HTML/Mason/Compiler/ToObject.pm blib/lib/HTML/Mason/Compiler/ToObject.pm cp lib/HTML/Mason/Apache/Request.pm blib/lib/HTML/Mason/Apache/Request.pm cp lib/HTML/Mason/Parser.pm blib/lib/HTML/Mason/Parser.pm cp lib/HTML/Mason/Admin.pod blib/lib/HTML/Mason/Admin.pod cp lib/HTML/Mason/CGIHandler.pm blib/lib/HTML/Mason/CGIHandler.pm cp lib/HTML/Mason/Component/FileBased.pm blib/lib/HTML/Mason/Component/FileBased.pm cp lib/HTML/Mason/Cache/BaseCache.pm blib/lib/HTML/Mason/Cache/BaseCache.pm cp lib/HTML/Mason/Resolver/Null.pm blib/lib/HTML/Mason/Resolver/Null.pm cp bin/convert0.6.README blib/script/convert0.6.README cp bin/convert0.6.pl blib/script/convert0.6.pl "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/convert0.6.README "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/convert0.6.pl cp bin/convert0.8.README blib/script/convert0.8.README "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/convert0.8.README cp bin/convert0.8.pl blib/script/convert0.8.pl "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/convert0.8.pl cp bin/mason.pl blib/script/mason.pl "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/mason.pl Manifying 31 pod documents make[1]: Leaving directory '/build/libhtml-mason-perl-1.59' dh_auto_test make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libhtml-mason-perl-1.59' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.44 # # === Configure Suggests === # # Module Want Have # -------- ------- ---- # JSON::PP 2.27300 4.04 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.44 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.44 # File::Spec 0.8 3.78 # Test::Deep any 1.130 # Test::More 0.96 1.302175 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ---------------- ---- ----- # CGI 2.46 4.51 # Cache::Cache 1.00 1.08 # Class::Container 0.07 0.13 # Exception::Class 1.15 1.44 # File::Spec 0.8 3.78 # HTML::Entities any 3.75 # Log::Any 0.08 1.709 # Params::Validate 0.70 1.30 # Scalar::Util 1.01 1.55 # t/00-report-prereqs.t ......... 1..1 ok 1 ok # Running syntax tests (16 tests): Basic component syntax tests # Running replace (#1): tests <% %> tag # Running percent (#2): tests %-line syntax # Running fake_percent (#3): tests % in text section # Running empty_percents (#4): tests empty %-lines # Running empty_percents2 (#5): tests empty %-lines followed by other %-lines # Running space_after_method_name (#6): tests that spaces are allowed after method/subcomp names # Running comment_in_attr_flags (#7): tests that comments are allowed at end of flag/attr lines # Running dash in subcomp named (#8): tests that dashes are allowed in subcomponent names # Running flags_on_one_line (#9): tests that a flags block can be one line # Running attr_uc_ending (#10): tests that an attr ending tag can be upper-case # Running args_uc_ending (#11): tests that args ending tag can be mixed case # Running comment_in_call (#12): make a comp call with a commented line # Running comment_in_call2 (#13): make a comp call with content with a commented line # Running call_starts_with_newline (#14): make a comp call where the tag starts with a newline # Running cleanup_init (#15): test that cleanup block has access to variables from init section # Running cleanup_perl (#16): test that cleanup block has access to variables from perl section t/01-syntax.t ................. 1..16 ok 1 - replace ok 2 - percent ok 3 - fake_percent ok 4 - empty_percents ok 5 - empty_percents2 ok 6 - space_after_method_name ok 7 - comment_in_attr_flags ok 8 - dash in subcomp named ok 9 - flags_on_one_line ok 10 - attr_uc_ending ok 11 - args_uc_ending ok 12 - comment_in_call ok 13 - comment_in_call2 ok 14 - call_starts_with_newline ok 15 - cleanup_init ok 16 - cleanup_perl ok # Running comp-calls tests (14 tests): Component call syntax # Running ampersand (#1): tests all variations of component call path syntax # Running ampersand_with_args (#2): tests variations of component calls with arguments # Running ampersand_with_funny_name (#3): component with non-alphabetic characters # Running canonicalize_paths (#4): test that various paths are canonicalized to the same component # Running fetch_comp_no_arg (#5): fetch_comp with blank or undefined argument returns undef # Running outside_comp_root_prepare (#6): test that file exists in dist/t for next two tests # Running outside_comp_root_absolute (#7): cannot call components outside comp root with absolute path # Running outside_comp_root_relative (#8): cannot call components outside comp root with relative path # Running outside_comp_root_relative_from_top (#9): cannot call components outside comp root with relative path from component at top of root # Running parent_designator_with_no_parent (#10): using PARENT from component with no parent # Running no_such_method (#11): calling nonexistent method on existing component # Running fetch_comp_no_errors (#12): fetch_comp should not throw any errors # Running comp_exists (#13): test comp_exists with various types of paths # Running comp_exists_no_arg (#14): comp_exists with blank or undefined argument returns 0 t/01a-comp-calls.t ............ 1..14 ok 1 - ampersand ok 2 - ampersand_with_args ok 3 - ampersand_with_funny_name ok 4 - canonicalize_paths ok 5 - fetch_comp_no_arg ok 6 - outside_comp_root_prepare ok 7 - outside_comp_root_absolute ok 8 - outside_comp_root_relative ok 9 - outside_comp_root_relative_from_top ok 10 - parent_designator_with_no_parent ok 11 - no_such_method ok 12 - fetch_comp_no_errors ok 13 - comp_exists ok 14 - comp_exists_no_arg ok # Running sections tests (15 tests): Tests various <%foo> sections # Running args (#1): tests <%args> block # Running attr (#2): tests <%attr> block # Running def (#3): tests <%def> block # Running doc (#4): tests <%doc> section # Running filter (#5): tests <%filter> section # Running flags (#6): tests <%flags> section # Running init (#7): tests <%init> section # Running method (#8): tests <%method> section # Running once (#9): tests <%once> block # Running perl (#10): test <%perl> sections and makes sure block names are case-insensitive # Running omitted_args (#11): tests error message when expect args are not passed # Running overridden_args (#12): tests overriding of default args values # Running shared (#13): tests <%shared> section # Running text (#14): tests <%text> section # Running multiple (#15): tests repeated blocks of the same type t/02-sections.t ............... 1..15 ok 1 - args ok 2 - attr ok 3 - def ok 4 - doc ok 5 - filter ok 6 - flags ok 7 - init ok 8 - method ok 9 - once ok 10 - perl ok 11 - omitted_args ok 12 - overridden_args ok 13 - shared ok 14 - text ok 15 - multiple ok # Running filter tests (14 tests): Tests <%filter> specific problems # Running filter_and_shared (#1): make sure <%filter> can see variables from <%shared> # Running filter_and_ARGS (#2): make sure <%filter> can see variables %ARGS # Running filter_and_ARGS_assign (#3): make sure <%filter> can see changes to %ARGS # Running filter_and_args_section (#4): make sure <%filter> can see variables from <%args> section # Running filter_and_args_error (#5): args error should not present a problem for <%filter> # Running filter_and_clear (#6): make sure <%filter> does not break $m->clear_buffer # Running filters_in_subcomps (#7): test <%filter> sections in subcomps only # Running filters_in_comp_and_subcomps (#8): test <%filter> sections in both main comp and subcomps # Running filter_and_flush (#9): test that filter still occurs in presence of flush # Running clear_in_comp_called_with_filter (#10): Test that clear_buffer clears _all_ buffers, even inside a filter # Running comp_call_in_filter (#11): Test that calling another component from a filter section works # Running auto_filter_die/abort_comp_call_in_filter_with_autohandler (#12): Test that calling another component that dies from a filter section in a component wrapped by an autohandler produces a proper error # Running abort_in_filter (#13): Test that abort in a filter causes no output # Running abort_in_shared_with_filter (#14): Test that abort in a shared block works when component has a filter block t/02a-filter.t ................ 1..14 ok 1 - filter_and_shared ok 2 - filter_and_ARGS ok 3 - filter_and_ARGS_assign ok 4 - filter_and_args_section ok 5 - filter_and_args_error ok 6 - filter_and_clear ok 7 - filters_in_subcomps ok 8 - filters_in_comp_and_subcomps ok 9 - filter_and_flush ok 10 - clear_in_comp_called_with_filter ok 11 - comp_call_in_filter ok 12 - auto_filter_die/abort_comp_call_in_filter_with_autohandler ok 13 - abort_in_filter ok 14 - abort_in_shared_with_filter ok # Running misc tests (11 tests): autohandler and dhandler functionality # Running autohandler (#1): autohandler test # Running dhandler1 (#2): tests dhandler against nonexistent comp # Running dhandler2 (#3): real comp to make sure the real comp is invoked, not the dhandler # Running dhandler3 (#4): real comp declines the request to make sure the dhandler is invoked # Running dhandler4 (#5): declines twice to make sure higher level dhandler is called # Running dhandler5 (#6): decline with doubled slash (//) in URL path # Running dhandler6 (#7): test that a dhandler more than one directory up is found # Running accessor_validate (#8): test accessor parameter validation # Running contained_accessor_validate (#9): test contained accessor parameter validation # Running top_level_dhandler_handles (#10): make sure dhandler at /dhandler is called correctly after decline from lower-level dhandler # Running top_level_dhandler_declines (#11): make sure /dhandler decline results in not-found error t/04-misc.t ................... 1..11 ok 1 - autohandler ok 2 - dhandler1 ok 3 - dhandler2 ok 4 - dhandler3 ok 5 - dhandler4 ok 6 - dhandler5 ok 7 - dhandler6 ok 8 - accessor_validate ok 9 - contained_accessor_validate ok 10 - top_level_dhandler_handles ok 11 - top_level_dhandler_declines ok # Running request tests (38 tests): request object functionality # Running abort (#1): test $m->abort method (autoflush on) # Running abort_0 (#2): test $m->abort method with value of 0 # Running abort (#3): test $m->abort method (autoflush off) # Running file (#4): tests $m->file method # Running file_in_subcomp (#5): tests $m->file method in subcomponent # Running list_out (#6): tests that $m->print can handle a list of arguments # Running req_obj (#7): tests various operations such as comp calls, $m->current_comp # Running various (#8): tests caller, callers, fetch_comp, process_comp_path, comp_exists and scomp # Running fetch_next (#9): Test $m->fetch_next and $m->fetch_next_all # Running print (#10): Test print function from a component # Running printf (#11): Test printf function from a component # Running autoflush_print (#12): Test print function from a component with autoflush on # Running autoflush_printf (#13): Test printf function from a component with autoflush on # Running flush_print (#14): Test print function from a component in conjunction with $m->flush_buffer call # Running flush_print_autoflush (#15): Test print function from a component with autoflush on in conjunction with $m->flush_buffer call # Running flush_filter (#16): Test $m->flush_buffer in presence of filter # Running clear_buffer (#17): Test $m->clear_buffer in a normal component # Running clear_filter (#18): Test $m->clear_buffer in presence of filter # Running autoflush_disabled (#19): Using autoflush when disabled generates an error # Running instance (#20): Test HTML::Mason::Request->instance # Running abort_and_filter (#21): Test that an abort in a filtered component still generates _some_ output, and that filter is run only once # Running abort_and_filter_2 (#22): Test that $m->aborted can be checked in a filter section # Running abort_and_store (#23): Test that an abort in a store'd component still generates _some_ output # Running clear_and_abort (#24): Test the clear_and_abort() method # Running reexec (#25): test that $m cannot be reexecuted # Running caller_in_subcomp (#26): tests $m->caller() in subcomponent # Running caller_at_top_level (#27): tests $m->caller() from top component # Running longjump (#28): Accidentally calling next to exit a component does not corrupt stack # Got warnings: Exiting subroutine via next at /build/libhtml-mason-perl-1.59/mason_tests/20799/comps/request/support/subdir/longjump_test2 line 2. # Exiting subroutine via next at /build/libhtml-mason-perl-1.59/mason_tests/20799/comps/request/support/subdir/longjump_test2 line 2. # Exiting subroutine via next at /build/libhtml-mason-perl-1.59/mason_tests/20799/comps/request/support/subdir/longjump_test2 line 2. # Exiting subroutine via next at /build/libhtml-mason-perl-1.59/mason_tests/20799/comps/request/support/subdir/longjump_test2 line 2. # Exiting subroutine via next at /build/libhtml-mason-perl-1.59/mason_tests/20799/comps/request/support/subdir/longjump_test2 line 2. # Exiting subroutine via next at /build/libhtml-mason-perl-1.59/mason_tests/20799/comps/request/support/subdir/longjump_test2 line 2. # Running callers_out_of_bounds (#29): tests $m->callers() for out of bounds indexes # Running call_self (#30): Test $m->call_self # Running call_self_retval (#31): Test that we can get return value of component via $m->call_self # Running call_self_output_and_retval (#32): Test that we can get return value and output of component via $m->call_self # Running call_self_with_filter (#33): Test that $m->call_self works in presence of filter # Running subcomp_from_shared (#34): Test calling a subcomponent inside shared block # Running method_in_shared (#35): Test calling a method inside shared block # Running notes (#36): Test the notes() method # Running flush_and_store (#37): Test that $m->flush_buffer is ignored in a store'd component # Running flush_and_scomp_recursive (#38): Test that $m->flush_buffer is ignored in a recursive scomp() call t/05-request.t ................ 1..38 ok 1 - abort ok 2 - abort_0 ok 3 - abort ok 4 - file ok 5 - file_in_subcomp ok 6 - list_out ok 7 - req_obj ok 8 - various ok 9 - fetch_next ok 10 - print ok 11 - printf ok 12 - autoflush_print ok 13 - autoflush_printf ok 14 - flush_print ok 15 - flush_print_autoflush ok 16 - flush_filter ok 17 - clear_buffer ok 18 - clear_filter ok 19 - autoflush_disabled ok 20 - instance ok 21 - abort_and_filter ok 22 - abort_and_filter_2 ok 23 - abort_and_store ok 24 - clear_and_abort ok 25 - reexec ok 26 - caller_in_subcomp ok 27 - caller_at_top_level ok 28 - longjump ok 29 - callers_out_of_bounds ok 30 - call_self ok 31 - call_self_retval ok 32 - call_self_output_and_retval ok 33 - call_self_with_filter ok 34 - subcomp_from_shared ok 35 - method_in_shared ok 36 - notes ok 37 - flush_and_store ok 38 - flush_and_scomp_recursive ok # Running stack_corruption tests (1 tests): tests for stack corruption # Running stack_corruption (#1): test for stack corruption with comp-with-content call t/05a-stack-corruption.t ...... 1..1 ok 1 - stack_corruption ok # Running compiler tests (69 tests): compiler and lexer object functionality # Running allowed_globals (#1): test that undeclared globals cause an error # Running allowed_globals2 (#2): test that undeclared globals cause an error # Running allowed_globals3 (#3): test that declared globals are allowed # Running default_escape_flags (#4): test that no escaping is done by default # Running default_escape_flags_new (#5): test new escape flags # Running default_escape_flags_2 (#6): test that turning on default escaping works # Running default_escape_flags_2_new (#7): test that turning on default escaping works with new flags # Running setting_escapes (#8): test setting escapes # Running invalid_escape_name (#9): test setting an escape with an invalid name # Running globals_in_default_package (#10): tests that components are executed in HTML::Mason::Commands package by default # Running globals_in_different_package (#11): tests in_package compiler parameter # Running preamble (#12): tests preamble compiler parameter # Running postamble (#13): tests postamble compiler parameter # Running preprocess (#14): test preprocess compiler parameter # Running postprocess_text1 (#15): test postprocess compiler parameter (alpha blocks) # Running postprocess_text2 (#16): test postprocess compiler parameter (alpha blocks) # Running postprocess_perl1 (#17): test postprocess compiler parameter (perl blocks) # Running postprocess_perl2 (#18): test postprocess compiler parameter (perl blocks) # Running bad_var_name (#19): test that invalid Perl variable names are caught # Running whitespace_near_args (#20): test that whitespace is allowed before # Running line_nums (#21): make sure that errors are reported with the correct line numbers # Running line_nums2 (#22): make sure that errors are reported with the correct line numbers # Running line_nums3 (#23): make sure that errors are reported with the correct line numbers # Running line_nums4 (#24): make sure that errors are reported with the correct line numbers in <%once> blocks # Running line_nums_with_escaped_newlines (#25): Check line numbers of error messages after escaped newlines # Running line_nums_off_by_one (#26): make sure that line number reporting is not off by one # Running line_nums_off_2 (#27): make sure that line number reporting is not off (another buggy case) # Running attr_block_zero (#28): test proper handling of zero in <%attr> block values # Running attr_flag_block_comment (#29): test comment lines in attr and flags blocks # Running attr_flag_block_empty (#30): test empty attr and flags blocks # Running subcomp_parse_error (#31): A misnamed block at the beginning of a component was throwing the lexer into an infinite loop. Now it should be compiled into a component with a syntax error. # Running error_in_args (#32): Test line number reporting for <%args> block # Running block_end_without_nl (#33): Test that a block can end without a newline before it # Running more_block_variations (#34): Test various mixture of whitespace with blocks # Running percent_at_end (#35): Make sure that percent signs are only considered perl lines when at the beginning of the line # Running nameless_method (#36): Check for appropriate error message when there is a method or def block without a name # Running invalid_method_name (#37): Check for appropriate error message when there is a method with an invalid name # Running uc_method (#38): make sure that <%METHOD ...> is allowed # Running no_strict (#39): test turning off strict in a component # Running no_strict_no_object_files (#40): test turning off strict in a component when not using object files # Running weird_case (#41): test weird parsing case # Running subst_tag_comments (#42): Make sure comments parse correctly in substitution tags # Running shared_to_init (#43): Make sure <%init> can see lexicals in <%shared> # Running shared_to_init_global (#44): Make sure <%init> can see global variables in <%shared> # Running double_pipe_or (#45): Make sure || works in a substitution # Running double_pipe_or_2 (#46): Make sure || works in a substitution (again) # Running flags_regex (#47): Make sure flags must start with alpha or underscore # Running qw_in_perl_lines (#48): Make sure that Mason that a qw() list stretching across multiple perl-lines works # Running subcomp_leak (#49): Make sure subcomps from one component do not show up in other components # Running use_source_line_numbers_1 (#50): test presence of line directives when use_source_line_numbers is 1 (default) # Running use_source_line_numbers_0 (#51): test absence of line directives when use_source_line_numbers is 1 # Running define_args_hash_never (#52): test setting define_args_hash to never # Running define_args_hash_always (#53): test setting define_args_hash to always # Running define_args_hash_auto (#54): test setting define_args_hash to always # Running comment_in_sub (#55): test a substitution that only contains a comment # Running in_package_shared (#56): Make sure in_package works with %shared # Running in_package_m_in_shared (#57): Make sure $m works with %shared when in_package is set # Running compiler_id_change (#58): Make sure different compiler params use different object dirs # Running no_warnings (#59): Make sure no warnings are generated for trying to output undef # Running no_warnings_without_autoflush (#60): Make sure no warnings are generated for trying to output undef when enable_autoflush is off # Running no warnings (#61): Make sure that warnings _aren't_ generated for other bad use of uninit # Running warnings_without_autoflush (#62): Make sure that warnings _aren't_ generated for other bad use of uninit when enable_autoflush is off # Running warnings_need_explicit_enabling (#63): Make sure that warnings _are_ generated for other bad use of uninit # Got warnings: Use of uninitialized value $x in addition (+) at /build/libhtml-mason-perl-1.59/mason_tests/20860/comps/compiler/warnings_need_explicit_enabling line 3. # Running warnings_need_explicit_enabling_without_autoflush (#64): Make sure that warnings _are_ generated for other bad use of uninit when enable_autoflush is off # Got warnings: Use of uninitialized value $x in addition (+) at /build/libhtml-mason-perl-1.59/mason_tests/20860/comps/compiler/warnings_need_explicit_enabling_without_autoflush line 3. # Running warnings_do_not_need_explicit_enabling_on_use_warnings (#65): Make sure that warnings _are_ generated on use_warnings for other bad use of uninit # Got warnings: Use of uninitialized value $x in addition (+) at /build/libhtml-mason-perl-1.59/mason_tests/20860/comps/compiler/warnings_do_not_need_explicit_enabling_on_use_warnings line 2. # Running warnings_do_not_need_explicit_enabling_without_autoflush_on_use_warnings (#66): Make sure that warnings _are_ generated on use_warnings for other bad use of uninit when enable_autoflush is off # Got warnings: Use of uninitialized value $x in addition (+) at /build/libhtml-mason-perl-1.59/mason_tests/20860/comps/compiler/warnings_do_not_need_explicit_enabling_without_autoflush_on_use_warnings line 2. # Running unbalanced_content_block_error (#67): Detect and report unbalanced tags # Running unbalanced_content_block_subcomp_error (#68): Detect and report unbalanced tags in subcomponents # Running non_stringifying_escape (#69): stringify after escapes, not before t/06-compiler.t ............... 1..69 ok 1 - allowed_globals ok 2 - allowed_globals2 ok 3 - allowed_globals3 ok 4 - default_escape_flags ok 5 - default_escape_flags_new ok 6 - default_escape_flags_2 ok 7 - default_escape_flags_2_new ok 8 - setting_escapes ok 9 - invalid_escape_name ok 10 - globals_in_default_package ok 11 - globals_in_different_package ok 12 - preamble ok 13 - postamble ok 14 - preprocess ok 15 - postprocess_text1 ok 16 - postprocess_text2 ok 17 - postprocess_perl1 ok 18 - postprocess_perl2 ok 19 - bad_var_name ok 20 - whitespace_near_args ok 21 - line_nums ok 22 - line_nums2 ok 23 - line_nums3 ok 24 - line_nums4 ok 25 - line_nums_with_escaped_newlines ok 26 - line_nums_off_by_one ok 27 - line_nums_off_2 ok 28 - attr_block_zero ok 29 - attr_flag_block_comment ok 30 - attr_flag_block_empty ok 31 - subcomp_parse_error ok 32 - error_in_args ok 33 - block_end_without_nl ok 34 - more_block_variations ok 35 - percent_at_end ok 36 - nameless_method ok 37 - invalid_method_name ok 38 - uc_method ok 39 - no_strict ok 40 - no_strict_no_object_files ok 41 - weird_case ok 42 - subst_tag_comments ok 43 - shared_to_init ok 44 - shared_to_init_global ok 45 - double_pipe_or ok 46 - double_pipe_or_2 ok 47 - flags_regex ok 48 - qw_in_perl_lines ok 49 - subcomp_leak ok 50 - use_source_line_numbers_1 ok 51 - use_source_line_numbers_0 ok 52 - define_args_hash_never ok 53 - define_args_hash_always ok 54 - define_args_hash_auto ok 55 - comment_in_sub ok 56 - in_package_shared ok 57 - in_package_m_in_shared ok 58 - compiler_id_change ok 59 - no_warnings ok 60 - no_warnings_without_autoflush ok 61 - no warnings ok 62 - warnings_without_autoflush ok 63 - warnings_need_explicit_enabling ok 64 - warnings_need_explicit_enabling_without_autoflush ok 65 - warnings_do_not_need_explicit_enabling_on_use_warnings ok 66 - warnings_do_not_need_explicit_enabling_without_autoflush_on_use_warnings ok 67 - unbalanced_content_block_error ok 68 - unbalanced_content_block_subcomp_error ok 69 - non_stringifying_escape ok t/06a-compiler_obj.t .......... 1..4 # Running under perl version 5.032001 for linux # Current time local: Fri May 21 06:41:01 2021 # Current time GMT: Fri May 21 18:41:01 2021 # Using Test.pm version 1.31 ok 1 ok 2 ok 3 ok 4 ok # Running compiler_named_subs tests (4 tests): compiler with named subs in components # Running basic (#1): Make sure that named_component_subs_works # Running subcomps (#2): Make sure that named_component_subs_works with subcomps # Running methods (#3): Make sure that named_component_subs_works with methods # Running shared (#4): Make sure that named_component_subs_works with shared block t/06b-compiler-named-subs.t ... 1..4 ok 1 - basic ok 2 - subcomps ok 3 - methods ok 4 - shared ok # Running has space tests (1 tests): compiler test for paths with spaces # Running whatever (#1): error in component in path with spaces t/06c-compiler-spaces-path.t .. 1..1 ok 1 - whatever ok # Running interp tests (36 tests): interp object functionality # Running no recursive autohandlers (#1): tests turning off recursive autohandlers # Running no autohandlers (#2): tests turning off autohandlers by setting name to "" # Running alternate autohandler name (#3): tests that providing an alternate name for autohandlers works # Running shared (#4): test that component in both comp_roots is called in first comp_root # Running private1 (#5): test that component in first comp_root is found # Running private2 (#6): test that component in second comp_root is found # Running max_recurse_1 (#7): Test that recursion 8 levels deep is allowed # Running max_recurse_2 (#8): Test that recursion is stopped after 32 levels # Running max_recurse_3 (#9): Test interp max_recurse param # Running code_cache_unlimited (#10): code cache: max_size = unlimited # Running code_cache_0 (#11): code cache: max_size = 0 # Running code_cache_4 (#12): code cache: max_size = 4 # Running code_cache_8 (#13): code cache: max_size = 8 # Running dhandler_name (#14): Test that providing an alternate name for dhandlers works # Running dhandler_name2 (#15): Shut off dhandlers # Running no dhandlers (#16): tests turning off dhandlers by setting name to "" # Running dhandler_name0 (#17): dhandler_name => 0 should not shut off dhandlers # Running no_autoflush_mode (#18): Test that no autoflush (batch) mode setting works # Running autoflush_mode (#19): Test that autoflush setting works # Running preload_1 (#20): Make sure no preloading is done by default # Running preload_2 (#21): Preload a single component by filename # Running preload_3 (#22): Preload all components (including subdirectory) by glob pattern # Running globals (#23): Test setting a global in interp & compiler objects # Running process_comp_path (#24): Test that component paths cannot be resolved outside the comp root # Running process_comp_path2 (#25): Test that component paths containing /../ work as long they stay in the comp root # Running default_warnings (#26): test that warnings during component compilation cause an exception except for redefined subs # Running ignore_warnings (#27): test that setting ignore_warnings_exp works # Running ignore_all_warnings (#28): test ignoring all warnings # Running make_anonymous_component (#29): test make_component() without a path # Running read_write_contained (#30): test that we can read/write contained object params # Running no_data_dir (#31): test interp without a data directory # Running no_comp_root (#32): test interp without a comp root or data dir # Running make_component_error (#33): make sure a proper exception is thrown with make_component syntax errors # Running escape_flags (#34): test setting escape flags via constructor # Running set_out_method (#35): test setting out_method on the interp object # Running corrupt_object_file (#36): test that Mason can recover from a corrupt or empty object file t/07-interp.t ................. 1..36 ok 1 - no recursive autohandlers ok 2 - no autohandlers ok 3 - alternate autohandler name ok 4 - shared ok 5 - private1 ok 6 - private2 ok 7 - max_recurse_1 ok 8 - max_recurse_2 ok 9 - max_recurse_3 ok 10 - code_cache_unlimited ok 11 - code_cache_0 ok 12 - code_cache_4 ok 13 - code_cache_8 ok 14 - dhandler_name ok 15 - dhandler_name2 ok 16 - no dhandlers ok 17 - dhandler_name0 ok 18 - no_autoflush_mode ok 19 - autoflush_mode ok 20 - preload_1 ok 21 - preload_2 ok 22 - preload_3 ok 23 - globals ok 24 - process_comp_path ok 25 - process_comp_path2 ok 26 - default_warnings ok 27 - ignore_warnings ok 28 - ignore_all_warnings ok 29 - make_anonymous_component ok 30 - read_write_contained ok 31 - no_data_dir ok 32 - no_comp_root ok 33 - make_component_error ok 34 - escape_flags ok 35 - set_out_method ok 36 - corrupt_object_file ok # Running interp-mcr tests (17 tests): In-depth testing of multiple component roots # Running no_dynamic_comp_root (#1): change comp root without dynamic_comp_root # Running change_single_comp_root (#2): change single root # Running reuse_comp_root_key (#3): change comp root key mapping # Running test17-0 (#4): test roots assigned to 1, 7, static_source=0 # Running test12348-0 (#5): test roots assigned to 1, 2, 3, 4, 8, static_source=0 # Running test1237-0 (#6): test roots assigned to 1, 2, 3, 7, static_source=0 # Running test2347-0 (#7): test roots assigned to 2, 3, 4, 7, static_source=0 # Running test54238-0 (#8): test roots assigned to 5, 4, 2, 3, 8, static_source=0 # Running test56-0 (#9): test roots assigned to 5, 6, static_source=0 # Running test1234-0 (#10): test roots assigned to 1, 2, 3, 4, static_source=0 # Running test17-1 (#11): test roots assigned to 1, 7, static_source=1 # Running test12348-1 (#12): test roots assigned to 1, 2, 3, 4, 8, static_source=1 # Running test1237-1 (#13): test roots assigned to 1, 2, 3, 7, static_source=1 # Running test2347-1 (#14): test roots assigned to 2, 3, 4, 7, static_source=1 # Running test54238-1 (#15): test roots assigned to 5, 4, 2, 3, 8, static_source=1 # Running test56-1 (#16): test roots assigned to 5, 6, static_source=1 # Running test1234-1 (#17): test roots assigned to 1, 2, 3, 4, static_source=1 t/07a-interp-mcr.t ............ 1..17 ok 1 - no_dynamic_comp_root ok 2 - change_single_comp_root ok 3 - reuse_comp_root_key ok 4 - test17-0 ok 5 - test12348-0 ok 6 - test1237-0 ok 7 - test2347-0 ok 8 - test54238-0 ok 9 - test56-0 ok 10 - test1234-0 ok 11 - test17-1 ok 12 - test12348-1 ok 13 - test1237-1 ok 14 - test2347-1 ok 15 - test54238-1 ok 16 - test56-1 ok 17 - test1234-1 ok # Running interp-static-source tests (6 tests): interp static source mode # Running change_component_without_static_source (#1): test that on-the-fly component changes are detected with static_source=0 # Running change_component_with_static_source (#2): test that changing component has no effect with static_source=1 # Running change_component_with_static_source_touch_file (#3): test that changing component has no effect until touch file is touched # Running remove_component_without_static_source (#4): test that removing source causes component not found with static_source=0 # Running remove_component_with_static_source (#5): test that removing source has no effect with static_source=1 # Running flush_code_cache_with_static_source (#6): test that code cache flush & object file removal works with static_source=1 t/07b-interp-static-source.t .. 1..6 ok 1 - change_component_without_static_source ok 2 - change_component_with_static_source ok 3 - change_component_with_static_source_touch_file ok 4 - remove_component_without_static_source ok 5 - remove_component_with_static_source ok 6 - flush_code_cache_with_static_source ok # Running component tests (14 tests): Component object functionality # Running comp_obj (#1): Tests several component object methods # Running context (#2): Tests list/scalar context propogation in comp calls # Running scomp (#3): Test scomp Request method # Running mfu_count (#4): Test mfu_count component method # Running store (#5): Test store parameter to component call # Running flush_clear (#6): Flush then clear # Running flush_clear_scomp (#7): Flush then clear inside scomp - flush only affects top buffer # Running attr_if_exists (#8): Test attr_if_exists method # Running methods (#9): Test methods method # Running subcomps (#10): Test subcomps method # Running attributes (#11): Test attributes method # Running component_args_copying (#12): Test that @_ contains aliases, <%args> and %ARGS contain copies after comp # Running subrequest_args_copying (#13): Test that @_ contains aliases, <%args> and %ARGS contain copies after subrequest # Running modification_read_only_arg (#14): Test that read-only argument cannot be modified through @_ t/09-component.t .............. 1..14 ok 1 - comp_obj ok 2 - context ok 3 - scomp ok 4 - mfu_count ok 5 - store ok 6 - flush_clear ok 7 - flush_clear_scomp ok 8 - attr_if_exists ok 9 - methods ok 10 - subcomps ok 11 - attributes ok 12 - component_args_copying ok 13 - subrequest_args_copying ok 14 - modification_read_only_arg ok # Running filters tests (22 tests): Filter Component # Running repeat (#1): Tests a filter which outputs the content multiple times, with different values # Running filter (#2): Tests a filter changes the contents # Running nested (#3): Tests nested filters # Running contentless (#4): test a filter with no content # Running default_content (#5): test a filter which does not access content # Running current_component (#6): test $m->current_comp inside filter content # Running various_tags (#7): test various tags in content # Running filter_with_filter (#8): test interaction with filter section # Running top_level_content (#9): test $m->content at top level is empty # Running filter_content (#10): test filtering $m->content # Running subcomponent_filter (#11): test method as filter # Running dollar_underscore (#12): Test using $_ in a filter # Running multi_filter (#13): Test order of multiple filters # Running clear_in_filter (#14): Test clear_buffer in a filtered call # Running clear_in_filter2 (#15): More clear_buffer in a filtered call # Running flush_in_filter (#16): Test flush_buffer in a filtered call # Running has_content (#17): Test $m->has_content # Running ending_tag_match (#18): Test # Running ending_tag_nomatch (#19): Test bad match # Running ending_tag_expr (#20): Test expr in <& expr> not matched # Running ending_tag_expr2 (#21): Test expr in not allowed # Running multiline_open_close (#22): Tests multiline opening and closing blocks for component with content call tags t/09a-comp_content.t .......... 1..22 ok 1 - repeat ok 2 - filter ok 3 - nested ok 4 - contentless ok 5 - default_content ok 6 - current_component ok 7 - various_tags ok 8 - filter_with_filter ok 9 - top_level_content ok 10 - filter_content ok 11 - subcomponent_filter ok 12 - dollar_underscore ok 13 - multi_filter ok 14 - clear_in_filter ok 15 - clear_in_filter2 ok 16 - flush_in_filter ok 17 - has_content ok 18 - ending_tag_match ok 19 - ending_tag_nomatch ok 20 - ending_tag_expr ok 21 - ending_tag_expr2 ok 22 - multiline_open_close ok # Running cache tests (20 tests): Test caching # Running cache_packages (#1): test that Mason cache packages get created # Running cache (#2): basic caching functionality # Running keys (#3): test multiple keys and $m->cache->get_keys # Running cache_self (#4): test $m->cache_self # Running cache_self_expires_in (#5): test that $m->cache_self respects expires_in parameter # Running cache_self_expire_in (#6): test that $m->cache_self respects expire_in parameter # Running cache_self_expire_if (#7): test that $m->cache_self respects expire_if parameter # Running cache_self_key (#8): test $m->cache_self with a key # Running cache_self_error (#9): test $m->cache_self with an error to make sure errors are propogated # Running cache_self_scomp (#10): make sure that $m->cache_self cooperates with $m->scomp # Running cache_self_filtered (#11): test $m->cache_self with a filter block # Running cache_self_filtered_scomp (#12): test $m->cache_self with a filter block callled via $m->scomp # Running cache_self_filtered_2 (#13): make sure that results are only filtered once # Running expire_if (#14): test expire_if # Running busy_lock (#15): test busy_lock # Running busy_lock_expiration (#16): test busy_lock expiration # Running cache_self_death (#17): test $m->cache_self and death # Running cache_self_abort (#18): test $m->cache_self and abort # Running cache_self_with_subexec (#19): test $m->subexec in presence of $m->cache_self # Running declined/cache_self_decline (#20): test $m->decline in presence of $m->cache_self t/10-cache.t .................. 1..20 ok 1 - cache_packages ok 2 - cache ok 3 - keys ok 4 - cache_self ok 5 - cache_self_expires_in ok 6 - cache_self_expire_in ok 7 - cache_self_expire_if ok 8 - cache_self_key ok 9 - cache_self_error ok 10 - cache_self_scomp ok 11 - cache_self_filtered ok 12 - cache_self_filtered_scomp ok 13 - cache_self_filtered_2 ok 14 - expire_if ok 15 - busy_lock ok 16 - busy_lock_expiration ok 17 - cache_self_death ok 18 - cache_self_abort ok 19 - cache_self_with_subexec ok 20 - declined/cache_self_decline ok # Running cache tests (6 tests): Test caching # Running cache (#1): basic caching functionality # Running cache_self (#2): cache_self functionality # Running keys (#3): test $m->cache( action => 'keys' ) # Running expire_if (#4): test expire_if # Running busy_lock (#5): test busy_lock # Running busy_lock_expiration (#6): test busy_lock expiration t/10a-cache-1.0x.t ............ 1..6 ok 1 - cache ok 2 - cache_self ok 3 - keys ok 4 - expire_if ok 5 - busy_lock ok 6 - busy_lock_expiration ok # Running cache tests (20 tests): Test caching # Running cache (#1): basic caching functionality # Running keys (#2): test multiple keys and $m->cache->get_keys # Running cache_self (#3): test $m->cache_self # Running cache_self_expires_in (#4): test that $m->cache_self respects expires_in parameter # Running cache_self_expire_in (#5): test that $m->cache_self respects expire_in parameter # Running cache_self_expire_if (#6): test that $m->cache_self respects expire_if parameter # Running cache_self_key (#7): test $m->cache_self with a key # Running cache_self_error (#8): test $m->cache_self with an error to make sure errors are propogated # Running cache_self_scomp (#9): make sure that $m->cache_self cooperates with $m->scomp # Running cache_self_filtered (#10): test $m->cache_self with a filter block # Running cache_self_filtered_scomp (#11): test $m->cache_self with a filter block callled via $m->scomp # Running cache_self_filtered_2 (#12): make sure that results are only filtered once # Running expire_if (#13): test expire_if # Running busy_lock (#14): test busy_lock # Running busy_lock_expiration (#15): test busy_lock expiration # Running cache_self_death (#16): test $m->cache_self and death # Running cache_self_abort (#17): test $m->cache_self and abort # Running cache_self_with_subexec (#18): test $m->subexec in presence of $m->cache_self # Running declined/cache_self_decline (#19): test $m->decline in presence of $m->cache_self # Running data_cache_defaults (#20): modifying data_cache_defaults t/10b-cache-chi.t ............. 1..20 ok 1 - cache ok 2 - keys ok 3 - cache_self ok 4 - cache_self_expires_in ok 5 - cache_self_expire_in ok 6 - cache_self_expire_if ok 7 - cache_self_key ok 8 - cache_self_error ok 9 - cache_self_scomp ok 10 - cache_self_filtered ok 11 - cache_self_filtered_scomp ok 12 - cache_self_filtered_2 ok 13 - expire_if ok 14 - busy_lock ok 15 - busy_lock_expiration ok 16 - cache_self_death ok 17 - cache_self_abort ok 18 - cache_self_with_subexec ok 19 - declined/cache_self_decline ok 20 - data_cache_defaults ok # Running inherit tests (10 tests): Test inheritance # Running bypass (#1): test inheritance that skips one autohandler # Running ignore (#2): turning off inheritance # Running normal (#3): normal inheritance path # Running base_comp (#4): base_comp test # Running base_comp_method (#5): base_comp method inheritance test # Running double_parent (#6): test that parent does not confuse children # Running subcomponent (#7): test subcomponents # Running call_next_in_def (#8): Test call_next() inside a subcomponent # Running subcomponent_inheritance (#9): test base_comp with subcomponents # Running request_tests (#10): Test that REQUEST: works t/11-inherit.t ................ 1..10 ok 1 - bypass ok 2 - ignore ok 3 - normal ok 4 - base_comp ok 5 - base_comp_method ok 6 - double_parent ok 7 - subcomponent ok 8 - call_next_in_def ok 9 - subcomponent_inheritance ok 10 - request_tests ok t/12-taint.t .................. 1..9 # Running under perl version 5.032001 for linux # Current time local: Fri May 21 06:41:37 2021 # Current time GMT: Fri May 21 18:41:37 2021 # Using Test.pm version 1.31 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok # Running errors tests (26 tests): Test that errors are generated properly # Running bad_args (#1): Make sure a bad args line is caught properly # Running backtrace (#2): Make sure trace for second error is accurate when first error is caught by eval # Running read_zero_size (#3): Make sure that Mason handles a zero length source file correctly # Running bad_source_callback (#4): Make sure that a bad source_callback for a ComponentSource object reports a useful error # Running bad_escape_flag (#5): Make sure that an invalid escape flag is reported properly # Running error_mode_output (#6): Make sure that existing output is cleared when an error occurs in error_mode=output # Running error_in_subrequest (#7): Make sure that an error in a subrequest is propogated back to the main request # Running check_error_format (#8): Make sure setting error_format => "html" works # Running check_exec_not_found (#9): Request to non-existent component # Running check_exec_not_found_html_format (#10): Request to non-existent component in html format # Running check_comp_not_found (#11): Component call to non-existent component # Running change_error_format (#12): Make sure setting $m->error_format($foo) works on the fly # Running check_error_format_brief (#13): Make sure setting error_format => "brief" works # Running object_exception (#14): Make sure Mason doesn't co-opt non Exception::Class exception objects # Running subcomponent_redefined (#15): Make sure Mason doesn't allow redefinition of subcomponent # Running method_redefined (#16): Make sure Mason doesn't allow redefinition of method # Running method_subcomp_conflict (#17): Make sure Mason doesn't allow a subcomponent and method to have the same name # Running subcomp_bad_name (#18): Make sure Mason doesn't allow a subcomponent with a bad name # Running content_comp_wrong_error (#19): Make sure syntax error inside <&|> tags is thrown correctly # Running top_level_compilation_error (#20): Make sure top-level compiler errors work in output mode # Running component_error_handler_false (#21): Test error-handling with component_error_handler set to false # Running component_error_Handler_no_upgrade (#22): Test that errors do not become object with component_error_handler set to false # Running component_error_handler_false_fatal_mode (#23): Test error-handling with component_error_handler set to false and error_mode set to fatal # Running component_error_handler_uc_message (#24): Test error-handling with component_error_handler set to a subroutine that upper-cases all text # Running use_bad_module (#25): Use a module with an error # Running require_bad_module_in_once (#26): Require a module with an error in a once block t/13-errors.t ................. 1..26 ok 1 - bad_args ok 2 - backtrace ok 3 - read_zero_size ok 4 - bad_source_callback ok 5 - bad_escape_flag ok 6 - error_mode_output ok 7 - error_in_subrequest ok 8 - check_error_format ok 9 - check_exec_not_found ok 10 - check_exec_not_found_html_format ok 11 - check_comp_not_found ok 12 - change_error_format ok 13 - check_error_format_brief ok 14 - object_exception ok 15 - subcomponent_redefined ok 16 - method_redefined ok 17 - method_subcomp_conflict ok 18 - subcomp_bad_name ok 19 - content_comp_wrong_error ok 20 - top_level_compilation_error ok 21 - component_error_handler_false ok 22 - component_error_Handler_no_upgrade ok 23 - component_error_handler_false_fatal_mode ok 24 - component_error_handler_uc_message ok 25 - use_bad_module ok 26 - require_bad_module_in_once ok # Running cgi tests (7 tests): HTML::Mason::CGIHandler class # Running basic (#1): Test basic CGIHandler operation # Running dynamic (#2): Test CGIHandler operation with dynamic components # Running args (#3): Test CGIHandler operation with arguments # Running cgi_object (#4): Test access to the CGI request object # Running fatal_error (#5): Test fatal error_mode # Running headers (#6): Test header generation # Running redirect_headers (#7): Test header generation t/14-cgi.t .................... 1..7 Content-Type: text/html; charset=ISO-8859-1 ok 1 - basic Content-Type: text/html; charset=ISO-8859-1 ok 2 - dynamic Content-Type: text/html; charset=ISO-8859-1 ok 3 - args Content-Type: text/html; charset=ISO-8859-1 ok 4 - cgi_object ok 5 - fatal_error Foo: bar Content-Type: text/html; charset=ISO-8859-1 ok 6 - headers Status: 302 Location: /hello.html ok 7 - redirect_headers ok t/14a-fake_apache.t ........... 1..97 ok 1 - use HTML::Mason::CGIHandler; ok 2 - Create new FakeTable ok 3 - Assing to Location ok 4 - Location if 'foo' ok 5 - location if 'foo' ok 6 - Delete location ok 7 - Set 'Hey' to 1 ok 8 - Add another value to 'Hey' ok 9 - Get array for 'Hey' ok 10 - Get first 'Hey' value only ok 11 - Check key in 'do' ok 12 - Check value in 'do' ok 13 - Check key in short 'do' ok 14 - Check value in short 'do' ok 15 - Set 'Hey' to 'bar' ok 16 - Get 'Hey' ok 17 - Get 'Hey' with get() ok 18 - Add 'you' to 'Hey' ok 19 - Get 'Hey' ok 20 - Get 'Hey' with get() ok 21 - Unset 'Hey' ok 22 - Hey doesn't exist ok 23 - Hey is undef ok 24 - Add Foo value ok 25 - Hey doesn't exist ok 26 - Hey is undef ok 27 - Create new FakeApache ok 28 - Check request method ok 29 - Set content type ok 30 - Check content type ok 31 - Get headers out ok 32 - Check header content-type ok 33 - Check lc header content-type ok 34 - Check header content-type ok 35 - Check lc header content-type ok 36 - Get headers out ok 37 - Check header content-type ok 38 - List context returns new hash list ok 39 - Set annoyance level ok 40 - Check annoyance level ok 41 - Check the hash directly ok 42 - Unset annoyance level ok 43 - Check annoyance level again ok 44 - Check the hash directly again ok 45 - Set cookie ok 46 - Set cookie ok 47 - Get error headers out ok 48 - Check for no error headers out ok 49 - Set location header ok 50 - Check Location ok 51 - Check location ok 52 - Get Location ok 53 - Get location ok 54 - Check user agent ok 55 - Get headers in table ok 56 - Check referer ok 57 - Check in content type ok 58 - Get notes ok 59 - No notes yet ok 60 - Set note 'foo' ok 61 - Get note 'foo' ok 62 - Get note 'FOO' ok 63 - Check note 'foo' ok 64 - Check uc note 'foo' ok 65 - Set 'bar' to 'ARRAY(0x2eb3f44)' ok 66 - Check for stringified ref ok 67 - Get stringified ref ok 68 - Get pnotes ok 69 - No pnotes yet ok 70 - Set note 'foo' ok 71 - Get note 'foo' ok 72 - Check note 'foo' ok 73 - Set 'bar' to 'ARRAY(0x2eb6694)' ok 74 - Check for stringified ref ok 75 - Get params ok 76 - Check 'foo' ok 77 - Check 'bar' ok 78 - Check 'you' ok 79 - Get CONTENT_LENGTH env ok 80 - Get content_length env ok 81 - Check CONTENT_LENGTH env ok 82 - Check content_length env ok 83 - Set CONTENT_LENGTH 56 ok 84 - Check CONTENT_LENGTH env 56 ok 85 - Check content_length env 56 ok 86 - Reset env ok 87 - Check CONTENT_LENGTH env again ok 88 - Check content_length env again ok 89 - Get http headers ok 90 - Check status ok 91 - Check location ok 92 - Check content type ok 93 - Check first cookie ok 94 - Check second cookie ok 95 - test uri method ok 96 - test path_info method ok 97 # skip This test requires Test::Output ok # Running subclass tests (4 tests): Test use of subclasses for various core classes # Running request_subclass (#1): use a HTML::Mason::Request subclass # Running request_subclass_of_subclass (#2): use a HTML::Mason::Request grandchild # Running lexer_subclass (#3): use a HTML::Mason::Lexer subclass # Running compiler_subclass (#4): use a HTML::Mason::Compiler subclass t/15-subclass.t ............... 1..4 ok 1 - request_subclass ok 2 - request_subclass_of_subclass ok 3 - lexer_subclass ok 4 - compiler_subclass ok t/17-print.t .................. 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok # Running 18-leak.t tests (5 tests): Tests that various memory leaks are no longer with us # Running interp_destroy (#1): Test that interps with components in cache still get destroyed # Running request_destroy (#2): Test that requests get destroyed after top-level component error # Running component_destroy (#3): Test that components get freed when cleared from the main cache # Running component_destroy_static_source (#4): Test that components get freed in static source mode # Running subcomponent_destroy (#5): Test that defs and methods don't cause components to leak t/18-leak.t ................... 1..5 ok 1 - interp_destroy ok 2 - request_destroy ok 3 - component_destroy ok 4 - component_destroy_static_source ok 5 - subcomponent_destroy ok # Running subrequest tests (15 tests): subrequest-related features # Running subrequest (#1): tests the official subrequest mechanism # Running subrequest_with_autohandler (#2): tests the subrequest mechanism with an autohandler # Running subreq_exec_order (#3): Test that output from a subrequest comes out when we expect it to. # Running autoflush_subrequest (#4): make sure that a subrequest respects its parent autoflush setting # Running subrequest_inherits_no_autoflush (#5): make sure that a subrequest inherits its parent autoflush setting (autoflush off) # Running autoflush_in_subrequest (#6): make sure that a subrequest with autoflush on does not flush parent # Running return_scalar (#7): tests that exec returns scalar return value of top component # Running return_list (#8): tests that exec returns list return value of top component # Running return_nothing (#9): tests exec in non-return context # Running kwindla (#10): tests bug report from Kwindla Kramer # Running in_package (#11): use in_package with subrequest # Running relative_path_call (#12): call subrequest with relative path # Running comp_object_call (#13): call subrequest with component object # Running max_recurse_1 (#14): Test that recursion 8 levels deep is allowed # Running max_recurse_2 (#15): Test that recursion is stopped after 32 subexecs t/19-subrequest.t ............. 1..15 ok 1 - subrequest ok 2 - subrequest_with_autohandler ok 3 - subreq_exec_order ok 4 - autoflush_subrequest ok 5 - subrequest_inherits_no_autoflush ok 6 - autoflush_in_subrequest ok 7 - return_scalar ok 8 - return_list ok 9 - return_nothing ok 10 - kwindla ok 11 - in_package ok 12 - relative_path_call ok 13 - comp_object_call ok 14 - max_recurse_1 ok 15 - max_recurse_2 ok # Running plugins tests (17 tests): request and component plugin hooks # Running before_and_after_request (#1): a simple plugin for requests # Running before_and_after_component (#2): a simple plugin for components # Running two_plugins (#3): using two different plugins # Running plugin_ordering (#4): make sure plugins are called in reverse order when ending # Running two_of_the_same_plugin (#5): two_of_the_same_plugin # Running reset_each_request (#6): use the same plugin twice, they should be different objects # Running error_on_start_request (#7): a plugin that dies # Running error_on_end_request (#8): a plugin that dies # Running error_on_start_component (#9): a plugin that dies # Running error_on_end_component (#10): a plugin that dies # Running not_persistent_across_requests (#11): different plugin for each request # Running persistent_across_requests (#12): same plugin across a subrequest # Running modify_return_end_component (#13): an end_component plugin that modifies its return value # Running modify_return_end_request (#14): an end_request plugin that modifies its return value # Running catch_error_end_component (#15): an end_component plugin that modifies its arguments to trap errors # Running catch_error_end_request (#16): an end_request plugin that modifies its arguments to trap errors # Running modify_content_end_request (#17): modify content at end of request t/20-plugins.t ................ 1..17 ok 1 - before_and_after_request ok 2 - before_and_after_component ok 3 - two_plugins ok 4 - plugin_ordering ok 5 - two_of_the_same_plugin ok 6 - reset_each_request ok 7 - error_on_start_request ok 8 - error_on_end_request ok 9 - error_on_start_component ok 10 - error_on_end_component ok 11 - not_persistent_across_requests ok 12 - persistent_across_requests ok 13 - modify_return_end_component ok 14 - modify_return_end_request ok 15 - catch_error_end_component ok 16 - catch_error_end_request ok 17 - modify_content_end_request ok t/21-escapes.t ................ 1..3 ok 1 - test basic HTML escape ok 2 - test HTML::Entities escape ok 3 - test url escape ok t/22-path-security.t .......... 1..1 ok 1 - Cannot get at /etc/passwd with bogus comp path ok t/23-leak2.t .................. 1..8 ok 1 - Interp before making a request ok 2 - Interp after making a request with in-memory comp ok 3 - Interp after making a request with on-disk comp ok 4 - object passed into request was destroyed ok 5 - Request object ok 6 - object passed into make_request was destroyed ok 7 - one object was destroyed in comp1 ok 8 - object was destroyed - 2 layers of comp-with-content ok t/24-tools.t .................. 1..1 ok 1 ok # Running flush-in-content tests (1 tests): recursive calls with $m->content # Running flush-in-deep-content (#1): make sure flush does not flush when we are in $m->content() t/25-flush-in-content.t ....... 1..1 ok 1 - flush-in-deep-content ok t/25-log.t .................... 1..1 ok 1 ok All tests successful. Files=36, Tests=543, 46 wallclock secs ( 0.30 usr 0.12 sys + 11.84 cusr 1.44 csys = 13.70 CPU) Result: PASS make[1]: Leaving directory '/build/libhtml-mason-perl-1.59' create-stamp debian/debhelper-build-stamp dh_prep dh_installdirs dh_auto_install make -j10 install DESTDIR=/build/libhtml-mason-perl-1.59/debian/tmp AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libhtml-mason-perl-1.59' Manifying 31 pod documents Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/ComponentSource.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Params.pod Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Lexer.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Admin.pod Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/FakeApache.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Plugin.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/ApacheHandler.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Subclassing.pod Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Tools.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Tests.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Escapes.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/CGIHandler.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/FAQ.pod Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Compiler.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Devel.pod Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Exceptions.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/MethodMaker.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Utils.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Parser.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Request.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Interp.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Handler.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Resolver.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Component.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Cache/BaseCache.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Plugin/Context.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Compiler/ToObject.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Apache/Request.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Component/FileBased.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Component/Subcomponent.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Resolver/Null.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/perl5/HTML/Mason/Resolver/File.pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Component::Subcomponent.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::ApacheHandler.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Admin.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Tests.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Tools.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Compiler.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Component::FileBased.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Utils.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Interp.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Resolver::File.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::ComponentSource.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Parser.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::MethodMaker.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Component.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Devel.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Plugin::Context.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Request.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Cache::BaseCache.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Resolver::Null.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::CGIHandler.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::FAQ.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Escapes.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::FakeApache.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Subclassing.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Exceptions.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Lexer.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Compiler::ToObject.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Resolver.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Params.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/share/man/man3/HTML::Mason::Plugin.3pm Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/bin/convert0.6.pl Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/bin/convert0.8.README Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/bin/convert0.6.README Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/bin/mason.pl Installing /build/libhtml-mason-perl-1.59/debian/tmp/usr/bin/convert0.8.pl make[1]: Leaving directory '/build/libhtml-mason-perl-1.59' dh_install dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libhtml-mason-perl-doc' in '../libhtml-mason-perl-doc_1.59-1_all.deb'. dpkg-deb: building package 'libhtml-mason-perl' in '../libhtml-mason-perl_1.59-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libhtml-mason-perl_1.59-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/972 and its subdirectories I: Current time: Fri May 21 06:41:49 -12 2021 I: pbuilder-time-stamp: 1621622509 Fri May 21 18:41:49 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ionos16-i386.debian.net. Fri May 21 18:41:49 UTC 2021 I: Preparing to do remote build '2' on ionos16-i386.debian.net. Fri May 21 18:42:51 UTC 2021 I: Deleting $TMPDIR on ionos16-i386.debian.net. Fri May 21 18:42:51 UTC 2021 I: libhtml-mason-perl_1.59-1_i386.changes: Format: 1.8 Date: Sat, 23 May 2020 01:19:29 +0200 Source: libhtml-mason-perl Binary: libhtml-mason-perl libhtml-mason-perl-doc Architecture: all Version: 1:1.59-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libhtml-mason-perl - HTML::Mason Perl module libhtml-mason-perl-doc - HTML::Mason examples Changes: libhtml-mason-perl (1:1.59-1) unstable; urgency=medium . [ Damyan Ivanov ] * declare conformance with Policy 4.1.3 (no changes needed) . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Xavier Guimard ] * Email change: Xavier Guimard -> yadd@debian.org . [ Debian Janitor ] * Trim trailing whitespace. * Wrap long lines in changelog entries: 0.87-2. * Bump debhelper from old 9 to 12. * Set debhelper-compat version in Build-Depends. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). . [ gregor herrmann ] * debian/watch: use uscan version 4. * Import upstream version 1.59. * Update debian/upstream/metadata. * Update years of upstream and packaging copyright. * Install new upstream docs. * Declare compliance with Debian Policy 4.5.0. * Set Rules-Requires-Root: no. * Annotate test-only build dependencies with . * Bump debhelper-compat to 13. * Set upstream metadata fields: Bug-Submit. * Drop ancient Conflicts/Replaces. * Install upstream scripts as examples. * Mention module name in long description. Checksums-Sha1: e45f30346262816921b05989b5b870f110dc1bb8 54968 libhtml-mason-perl-doc_1.59-1_all.deb 66975bebc83878fe3b57f5e0925f74eaf0b60760 356980 libhtml-mason-perl_1.59-1_all.deb c08d92376ac51ade30bfb070bca2cd85cd9685ff 8527 libhtml-mason-perl_1.59-1_i386.buildinfo Checksums-Sha256: 2454ef8aa0b8663f3045bd857ce44c5a3b275b20b92759d542c4fb8d3b4cdb68 54968 libhtml-mason-perl-doc_1.59-1_all.deb e3549d7ad922994b4ea1d7ce87ef64aec5a53bb6bcce1f58e1c7badb00e608d4 356980 libhtml-mason-perl_1.59-1_all.deb f4095ae326bf058704ff96112a7c849900e9ea9b942c2a88ee2aacc1fb15c7f1 8527 libhtml-mason-perl_1.59-1_i386.buildinfo Files: c51577358ace97634088d8719a131cf8 54968 doc optional libhtml-mason-perl-doc_1.59-1_all.deb 31505d71768e6c75d2fed7673bde26dc 356980 perl optional libhtml-mason-perl_1.59-1_all.deb b8f1aa9db25c11cc873b15071ef65ad0 8527 perl optional libhtml-mason-perl_1.59-1_i386.buildinfo Fri May 21 18:42:52 UTC 2021 I: diffoscope 172 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.5KNyr92wxp/libhtml-mason-perl_1.59-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.5KNyr92wxp/libhtml-mason-perl_1.59-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.5KNyr92wxp/libhtml-mason-perl_1.59-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.5KNyr92wxp/b1/libhtml-mason-perl_1.59-1_i386.changes /srv/reproducible-results/rbuild-debian/tmp.5KNyr92wxp/b2/libhtml-mason-perl_1.59-1_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.274s) 0.274s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.028s) 0.028s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Fri May 21 18:42:54 UTC 2021 I: diffoscope 172 found no differences in the changes files, and a .buildinfo file also exists. Fri May 21 18:42:54 UTC 2021 I: libhtml-mason-perl from bullseye built successfully and reproducibly on i386. Fri May 21 18:42:56 UTC 2021 I: Submitting .buildinfo files to external archives: Fri May 21 18:42:56 UTC 2021 I: Submitting 12K b1/libhtml-mason-perl_1.59-1_i386.buildinfo.asc Fri May 21 18:42:56 UTC 2021 I: Submitting 12K b2/libhtml-mason-perl_1.59-1_i386.buildinfo.asc Fri May 21 18:42:57 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 21 18:42:57 UTC 2021 I: Done submitting .buildinfo files. Fri May 21 18:42:57 UTC 2021 I: Removing signed libhtml-mason-perl_1.59-1_i386.buildinfo.asc files: removed './b1/libhtml-mason-perl_1.59-1_i386.buildinfo.asc' removed './b2/libhtml-mason-perl_1.59-1_i386.buildinfo.asc'