Wed Jun 2 02:51:20 UTC 2021 I: starting to build filter/bullseye/i386 on jenkins on '2021-06-02 02:50' Wed Jun 2 02:51:20 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_8/14072/console.log Wed Jun 2 02:51:20 UTC 2021 I: Downloading source for bullseye/filter=2.6.3+ds1-3 --2021-06-02 02:51:21-- http://cdn-fastly.deb.debian.org/debian/pool/main/f/filter/filter_2.6.3+ds1-3.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1841 (1.8K) Saving to: ‘filter_2.6.3+ds1-3.dsc’ 0K . 100% 179M=0s 2021-06-02 02:51:21 (179 MB/s) - ‘filter_2.6.3+ds1-3.dsc’ saved [1841/1841] Wed Jun 2 02:51:21 UTC 2021 I: filter_2.6.3+ds1-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: filter Binary: filter Architecture: any Version: 2.6.3+ds1-3 Maintainer: Debian QA Group Homepage: http://www.bolthole.com/filter/ Standards-Version: 3.9.7 Vcs-Browser: https://anonscm.debian.org/git/collab-maint/filter.git Vcs-Git: https://anonscm.debian.org/git/collab-maint/filter.git Build-Depends: debhelper (>= 9) Package-List: filter deb mail optional arch=any Checksums-Sha1: 053f7a1182492f00efc406beae70bdb0fe6ad336 114602 filter_2.6.3+ds1.orig.tar.gz 5681b4a4281d74810d848fa4180a7a6e11a4985d 11204 filter_2.6.3+ds1-3.debian.tar.xz Checksums-Sha256: 2de21265d9ec22a3f7dd4fe44fc0ed6642867d31cf1b8645999ab4d4f71fe5b6 114602 filter_2.6.3+ds1.orig.tar.gz 842ffb77ce56b4acd3dab587dcb70a6deb28ad9d44ef368add198cf1a6b8f42e 11204 filter_2.6.3+ds1-3.debian.tar.xz Files: f04c39f5a89e34ba4a2b5855449772e9 114602 filter_2.6.3+ds1.orig.tar.gz 10655d0ef7429348d8648a2b522d80c9 11204 filter_2.6.3+ds1-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBCAAGBQJWydihAAoJEGvmY8daNcl1/wEP/iNaKbHrnh5KZG0Z2uve0moJ yKbAPuD4nYcu+SfQj7KSy2wlEkL9Kfz1rz6F803lz7qQMDb15VguhyfMMA3VLVci ZthIelodi3EbfVHeFjgGUBh36FCMCGylm2ViMC3dvwRUBlJdaAlDXIqTj9kiTvkT FhM9ABXAxXXBFtBzgx/J0cDAmLBiwYAdAokjq8DFCW23we0MTAY8EtWIab1h9xIq T1Xrw12DVdyLrjJa2R9xU5Wr7TkmxWHrdX95VwX6y0FScjVD757YB1KzhbtSCLkl 4bKXKxSZ6mJLnjBknYnBtNuoqb/KQ5G3Nn1OU0qxZltD9RijNCsEMOYvQxP466yc NuxXw9G39GA4b1pkMDsTxcGat9Fy12IJIwwPf2B5+3m+gzTvb774mNeVJx5NOYNU kwMJ90NYC+qfXCLPsHPKvty7NRDWJ/atOI8RcS5kAJ0tJVM/FE2rA7Azh6sxEqtn KWwuJuKz9AzKzbU38KGAlVQyCm+ug51aCNko4ACf3FyaM2Qab9wo0jnwgHukJHtY NSxDM4KDjUcBvjyU5XrKmYpu33pTIuorZg9wBef1Z4M7dcIqOA+ofIUtdQbhaVDQ E09Bm1yjUKHMmjA9qxUJTBnon+m3S8trGzZVIZu3EVySs+rZ+lEZdj3eZWdKHILr v4FwrAubKZmdwA5ZWn2B =sNGM -----END PGP SIGNATURE----- Wed Jun 2 02:51:21 UTC 2021 I: Checking whether the package is not for us Wed Jun 2 02:51:21 UTC 2021 I: Starting 1st build on remote node ionos16-i386.debian.net. Wed Jun 2 02:51:21 UTC 2021 I: Preparing to do remote build '1' on ionos16-i386.debian.net. Wed Jun 2 02:51:42 UTC 2021 I: Deleting $TMPDIR on ionos16-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Jul 4 21:14:20 -12 2022 I: pbuilder-time-stamp: 1657012460 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [filter_2.6.3+ds1-3.dsc] I: copying [./filter_2.6.3+ds1.orig.tar.gz] I: copying [./filter_2.6.3+ds1-3.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.qNngwSWJ/trustedkeys.kbx': General error gpgv: Signature made Sun Feb 21 03:32:49 2016 -12 gpgv: using RSA key 6BE663C75A35C975 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./filter_2.6.3+ds1-3.dsc dpkg-source: info: extracting filter in filter-2.6.3+ds1 dpkg-source: info: unpacking filter_2.6.3+ds1.orig.tar.gz dpkg-source: info: unpacking filter_2.6.3+ds1-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying Configure.patch dpkg-source: info: applying Makefile.patch dpkg-source: info: applying config.h.SH.patch dpkg-source: info: applying config.h.patch dpkg-source: info: applying config.sh.patch dpkg-source: info: applying doc___Makefile.patch dpkg-source: info: applying doc___filter.1.patch dpkg-source: info: applying sysdefs.h.patch dpkg-source: info: applying pass-flags-properly-for-hardening.patch dpkg-source: info: applying fix-spelling-errors.patch dpkg-source: info: applying dont-hardcode-buildsystem-hostname.patch dpkg-source: info: applying fix-implicit-function-declarations.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/56689/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=18' DISTRIBUTION='' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='09b4af4c31024475b22f2c896f5d5ab6' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='56689' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.gVaPEzyQKY/pbuilderrc_aolu --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.gVaPEzyQKY/b1 --logfile b1/build.log filter_2.6.3+ds1-3.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://85.184.249.68:3128' I: uname -a Linux ionos16-i386 4.19.0-16-amd64 #1 SMP Debian 4.19.181-1 (2021-03-19) x86_64 GNU/Linux I: ls -l /bin total 5776 -rwxr-xr-x 1 root root 1367848 Feb 24 2021 bash -rwxr-xr-x 3 root root 38280 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 38280 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 17768 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 38824 Sep 22 2020 cat -rwxr-xr-x 1 root root 71624 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 67528 Sep 22 2020 chmod -rwxr-xr-x 1 root root 75752 Sep 22 2020 chown -rwxr-xr-x 1 root root 157960 Sep 22 2020 cp -rwxr-xr-x 1 root root 128724 Dec 10 2020 dash -rwxr-xr-x 1 root root 124904 Sep 22 2020 date -rwxr-xr-x 1 root root 92172 Sep 22 2020 dd -rwxr-xr-x 1 root root 100752 Sep 22 2020 df -rwxr-xr-x 1 root root 153964 Sep 22 2020 dir -rwxr-xr-x 1 root root 83644 Feb 7 2021 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 34664 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 34664 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 71928 Feb 7 2021 findmnt -rwsr-xr-x 1 root root 30112 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 210488 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 100952 Mar 2 2021 gzip -rwxr-xr-x 1 root root 21916 Nov 6 2019 hostname -rwxr-xr-x 1 root root 83980 Sep 22 2020 ln -rwxr-xr-x 1 root root 55572 Feb 7 2020 login -rwxr-xr-x 1 root root 153964 Sep 22 2020 ls -rwxr-xr-x 1 root root 153124 Feb 7 2021 lsblk -rwxr-xr-x 1 root root 96328 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 79912 Sep 22 2020 mknod -rwxr-xr-x 1 root root 47048 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 58920 Feb 7 2021 more -rwsr-xr-x 1 root root 50720 Feb 7 2021 mount -rwxr-xr-x 1 root root 13856 Feb 7 2021 mountpoint -rwxr-xr-x 1 root root 157996 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 2021 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 38824 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Feb 24 2021 rbash -> bash -rwxr-xr-x 1 root root 46984 Sep 22 2020 readlink -rwxr-xr-x 1 root root 75720 Sep 22 2020 rm -rwxr-xr-x 1 root root 46984 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 22292 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 125036 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jun 30 03:46 sh -> dash -rwxr-xr-x 1 root root 34696 Sep 22 2020 sleep -rwxr-xr-x 1 root root 83880 Sep 22 2020 stty -rwsr-xr-x 1 root root 79396 Feb 7 2021 su -rwxr-xr-x 1 root root 34696 Sep 22 2020 sync -rwxr-xr-x 1 root root 602584 Feb 16 2021 tar -rwxr-xr-x 1 root root 13860 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 108520 Sep 22 2020 touch -rwxr-xr-x 1 root root 34664 Sep 22 2020 true -rwxr-xr-x 1 root root 17768 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 30236 Feb 7 2021 umount -rwxr-xr-x 1 root root 34664 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 153964 Sep 22 2020 vdir -rwxr-xr-x 1 root root 63024 Feb 7 2021 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/56689/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19674 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 18.6 MB of archives. After unpacking 67.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main i386 bsdextrautils i386 2.36.1-7 [148 kB] Get: 2 http://deb.debian.org/debian bullseye/main i386 libuchardet0 i386 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main i386 groff-base i386 1.22.4-6 [952 kB] Get: 4 http://deb.debian.org/debian bullseye/main i386 libpipeline1 i386 1.5.3-1 [36.8 kB] Get: 5 http://deb.debian.org/debian bullseye/main i386 man-db i386 2.9.4-2 [1367 kB] Get: 6 http://deb.debian.org/debian bullseye/main i386 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main i386 libmagic-mgc i386 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main i386 libmagic1 i386 1:5.39-3 [133 kB] Get: 9 http://deb.debian.org/debian bullseye/main i386 file i386 1:5.39-3 [69.0 kB] Get: 10 http://deb.debian.org/debian bullseye/main i386 gettext-base i386 0.21-4 [176 kB] Get: 11 http://deb.debian.org/debian bullseye/main i386 libsigsegv2 i386 2.13-1 [35.1 kB] Get: 12 http://deb.debian.org/debian bullseye/main i386 m4 i386 1.4.18-5 [206 kB] Get: 13 http://deb.debian.org/debian bullseye/main i386 autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main i386 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main i386 automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main i386 autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main i386 libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main i386 libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main i386 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main i386 libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main i386 libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 23 http://deb.debian.org/debian bullseye/main i386 dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 24 http://deb.debian.org/debian bullseye/main i386 libelf1 i386 0.183-1 [171 kB] Get: 25 http://deb.debian.org/debian bullseye/main i386 dwz i386 0.13+20210201-1 [179 kB] Get: 26 http://deb.debian.org/debian bullseye/main i386 libicu67 i386 67.1-6 [8776 kB] Get: 27 http://deb.debian.org/debian bullseye/main i386 libxml2 i386 2.9.10+dfsg-6.7 [728 kB] Get: 28 http://deb.debian.org/debian bullseye/main i386 gettext i386 0.21-4 [1322 kB] Get: 29 http://deb.debian.org/debian bullseye/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main i386 debhelper all 13.3.4 [1049 kB] Fetched 18.6 MB in 0s (87.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19674 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-7_i386.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../01-libuchardet0_0.0.7-1_i386.deb ... Unpacking libuchardet0:i386 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_i386.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../03-libpipeline1_1.5.3-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_i386.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_i386.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../07-libmagic1_1%3a5.39-3_i386.deb ... Unpacking libmagic1:i386 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_i386.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_i386.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../10-libsigsegv2_2.13-1_i386.deb ... Unpacking libsigsegv2:i386 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_i386.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../23-libelf1_0.183-1_i386.deb ... Unpacking libelf1:i386 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_i386.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:i386. Preparing to unpack .../25-libicu67_67.1-6_i386.deb ... Unpacking libicu67:i386 (67.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_i386.deb ... Unpacking libxml2:i386 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_i386.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Setting up libpipeline1:i386 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:i386 (67.1-6) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:i386 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:i386 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:i386 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libelf1:i386 (0.183-1) ... Setting up libxml2:i386 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/filter-2.6.3+ds1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package filter dpkg-buildpackage: info: source version 2.6.3+ds1-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Axel Beckert dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_auto_clean dh_auto_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 clean make[1]: Entering directory '/build/filter-2.6.3+ds1' /bin/rm -f actions.o filter.o lock.o parse.o regexp.o rules.o summarize.o utils.o audit.o istrcmp.o mk_lockname.o strtokq.o filter core make[1]: Leaving directory '/build/filter-2.6.3+ds1' dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules build dh build dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_update_autotools_config debian/rules override_dh_auto_configure make[1]: Entering directory '/build/filter-2.6.3+ds1' # If you want to answer the questions yourself, comment out # the -d option ./Configure -d (I see you are using the Korn shell. Some ksh's blow up on Configure, especially on exotic machines. If yours does, try the Bourne shell instead.) Beginning of configuration questions for filter kit. First let's make sure your kit is complete. Checking... Looks good... Found bin directory Checking your sh to see if it knows about # comments... Your sh handles # comments correctly. Okay, let's see if #! works on this system... It does. Checking out how to guarantee sh startup... Let's see if '#!/bin/sh' works... Yup, it does. Checking echo to see how to suppress newlines... ...using \c This installation shell script will examine your system and ask you questions to determine how the filter package should be installed. If you get stuck on a question, you may use a ! shell escape to start a subshell or execute a command. Many of the questions will have default answers in square brackets--typing carriage return will give you the default. On some of the questions which ask for file or directory names you are allowed to use the ~name construct to specify the login directory belonging to "name", even if you don't have a shell which knows about that. Questions where this is allowed will be marked "(~name ok)". [Type carriage return to continue] Much effort has been expended to ensure that this shell script will run on any Unix system. If despite that it blows up on you, your best bet is to edit Configure and run it again. Also, let the Elm Development Group (elm@dsi.com) know how they blew it. If you can't run Configure for some reason, you'll have to generate a config.sh file by hand. This installation script affects things in two ways: 1) it may do direct variable substitutions on some of the files included in this kit, and 2) it builds a config.h file for inclusion in C programs. You may edit any of these files as the need arises after running this script. If you make a mistake on a question, there is no easy way to back up to it currently. The easiest thing to do is to edit config.sh and rerun all the SH files. Configure will offer to let you do this before it runs the SH files. [Type carriage return to continue] I see a config.sh file. Did Configure make it on THIS system? [y] Fetching default answers from your old config.sh file... Locating common programs... cat is in /bin/cat. chgrp is in /bin/chgrp. chmod is in /bin/chmod. cp is in /bin/cp. echo is in /bin/echo. expr is in /usr/bin/expr. grep is in /bin/grep. ln is in /bin/ln. ls is in /bin/ls. make is in /usr/bin/make. mv is in /bin/mv. rm is in /bin/rm. sed is in /bin/sed. touch is in /bin/touch. tr is in /usr/bin/tr. Don't worry if any of the following aren't found... I don't see Mcc out there, offhand. I don't see compress out there, either. cpp is in /usr/bin/cpp. I don't see execmail out there, either. I don't see line out there, either. I don't see lint out there, either. I don't see mips out there, either. nroff is in /usr/bin/nroff. I don't see pack out there, either. I don't see pmake out there, either. I don't see rmail out there, either. I don't see sendmail out there, either. I don't see smail out there, either. I don't see submit out there, either. tbl is in /usr/bin/tbl. test is in /usr/bin/test. troff is in /usr/bin/troff. uname is in /bin/uname. I don't see uuname out there, either. Checking compatibility between /bin/echo and builtin echo (if any)... They are not compatible! You are probably running ksh on a non-USG system. I'll have to use /bin/echo instead of the builtin, since Bourne shell doesn't have echo built in and we may have to run some Bourne shell scripts. That means I'll have to use -n to suppress newlines now. Life is ridiculous. Your cursor should be here--> Where do you want to put the public executables? [/usr/bin] Hmm... cat: /usr/include/sys/signal.h: No such file or directory Looks kind of like a version 7 system, but we'll see... Congratulations. You aren't running Eunice. It's not Xenix... Nor is it Venix... The Filter documentation is set up for troff. If you only have nroff, it can be used, but the documentation will not be as readable. If you use an alternate processor for troff/nroff documents it can be specified here. Filter expects the text processor to write to standard out. You will be given a chance to provide command line options to this command in the next question. Give the name of the program used to format the Filter documentation on your system: [/usr/bin/troff] If this text processor requires any options for proper formatting, specify them here. To specify no options, enter the word "none". Some versions of troff require the -t option to write to standard out. This is the proper place to specify that option. What options should Filter use with /usr/bin/troff: [] filter has manual pages that can be installed in unformatted or formatted form. Either or both (or neither) of these may be installed. Please give the location in which to store each type of man page. To specify that a particular type is not to be installed, answer "none" to the question. Where do the unformatted manual pages go? [/usr/share/man/man1] The installed unformatted manual pages can have various extensions to suit the conventions of the host operating system, for example "page.1". Note that the period '.' must be included as part of the extension. To specify no extension, enter the word "none". What extension should be used on installed unformatted man pages: [.1] Where do the formatted manual pages go? [none] Some systems have different model sizes. On most systems they are called small, medium, large, and huge. On the PDP11 they are called unsplit and split. If your system doesn't support different memory models, say "none". If you wish to force everything to one memory model, say "none" here and put the appropriate flags later when it asks you for other cc and ld flags. Xenix and Venix systems may wish to put "none" and let the compiler figure things out. (In the following question multiple model names should be space separated.) Which models are supported? [none] Use which C compiler? [cc] Some C compilers have problems with their optimizers, by default, filter compiles with the -O flag to use the optimizer. Alternately, you might want to use the symbolic debugger, which uses the -g flag (on traditional UNIX systems). Either flag can be specified here. To use neither flag, specify the word "none". What optimizer/debugger flag should be used? [-O] Your C compiler may want other flags. For this question you should include -I/whatever and -DWHATEVER flags and any other flags used by the C compiler, but you should NOT include libraries or ld flags like -lwhatever. To use no flags, specify the word "none". Any additional cc flags? [none] Your linker/loader may want other flags. For example, you might want to enable support for the symbolic debugger (-g on traditional UNIX systems). For this question you should specify those flags. Do NOT specify libraries (-lwhatever) here. Most systems will not need any special flags, in which case specify "none". Any additional ld flags (NOT including libraries)? [none] Checking for optional libraries... No -lintl. No -lnls. Some versions of UNIX support shared libraries, which make executables smaller but make load time slightly longer. On some systems, mostly newer UNIX System V's, the shared library is included by putting the option "-lc_s" as the last thing on the cc command line when linking. Other systems use shared libraries by default. There may be other libraries needed to compile filter on your machine as well. If your system needs the "-lc_s" option, include it here. Include any other special libraries here as well. Say "none" for none. Any additional libraries? [none] Now, how can we feed standard input to your C preprocessor... Maybe "cc -E" will work... Nope, maybe "/usr/bin/cpp" will work... Yup, it does. I can't seem to find your C library. I've looked in the following places: /usr/lib /usr/ccs/lib /usr/local/lib /usr/lib/large /lib /usr/lib/386 /lib/386 /lib /lib/large /usr/lib/small /lib/small None of these seems to contain your C library. What is the full name of your C library? Extracting names from None for later perusal... nm didn't seem to work right. Trying ar instead... ar: None: No such file or directory ar didn't seem to work right. Maybe this is a Cray...trying bld instead... ./Configure: 1968: bld: not found Ok. Your C preprocessor defines the following symbols: unix __STDC__ Using standard system "ctype" conversions. cuserid() not found F_SETLK not found, fcntl locking not available Dot lock style locking will be used Non-mailbox locks will use the /tmp directory Figuring out host name for forwarding purposes... Maybe "hostname" will work... Your host name appears to be "ionos16-i386". Is this correct? [y] Some sites have a special header, that tells you who an email is "really" to., eg "Really-To:" or "X-Rcpt-To:". (In other words, the "envelope" destination). If you'd like support for this kind of header, enter the header name now. Or enter "none" Name of Rcpt-To header? [none] There is no gethostname() or uname() on this system. The hostname will have to be compiled in. It can be overridden in the global elm.rc file in the library directory to specify hostname, hostfullname and hostdomain. You said termlib was -lcurses before. Using string.h instead of strings.h No index() or strchr() found! Some systems run MMDF as their Mail Transport Agent. MMDF uses a different way of delimiting messages in the mailbox files. Other systems don't run MMDF but use the MMDF separator in their mailbox files. The MMDF separator is usually a series of four Control A's. filter needs to know if this system uses the MMDF style message separator in its mailbox files. Does this system use MMDF style message separator? [n] Give the full path name of the program used to deliver mail on your system: [/usr/sbin/sendmail] Mail delivery agent /usr/sbin/sendmail doesn't exist. Use that name anyway? [y] Some newer mailers can deliver mail to addresses of the INTERNET persuasion, such as user@host.domain. Other older mailers require the complete uucp ! path to the destination to be specified in the address. Does your mailer understand INTERNET addresses? [y] locale.h found, filter will call setlocale nl_types.h found, filter will include the systems version catgets() not found Message catalog routines not found, filter will use its own Found memcpy() not found Some sites do not like to see the mail header "X-mailer:" in outgoing messages. If you choose, you may disable these headers. However, it is strongly urged to leave these headers in the mail to assist in tracking down problems. Would you like to disable the X-mailer: headers? [n] sigset() not found sigvec() not found--race conditions with signals may occur. No signal masking functions found. Testing to see if we should include , or both. I'm now running the test program... Trying -DI_TIME -DI_SYSTIME -DS_TIMEVAL Succeeded with -DI_TIME -DI_SYSTIME -DS_TIMEVAL One of the more annoying quirks of the UUCP network and various other systems that interact with it are that everyone seems to have different ideas about how to do routing, etc. Therefore, a lot of times e-mail will arrive from off site with corrupt, unusable "Reply-To:" and "From:" fields. This next question relates to whether your site is liable to get mangled fields or not... Does your site receive e-mail with valid "Reply-To:" and "From:" fields? Use Reply-To: and From: addresses? [y] Found Found Did not find Found You have void (*signal())() instead of int. NOTE: '%u' expands to the users login name. It MUST be present. Normal type of location looks like /var/mail/%u you can also use '%f' as the first letter of the username. EG /var/mail/%f/%u Where is yet-to-be-read mail spooled? [/var/mail/%u] Mail group is mail Since Filter is being installed as a setgid program, it must be installed by root, or a user able to set the setgid bit. End of configuration questions. Creating config.sh... Doing variable substitutions on .SH files... Extracting Makefile (with variable substitutions) Extracting config.h (with variable substitutions) Extracting sysdefs.h (with variable substitutions) Extracting doc/Makefile (with variable substitutions) Now you must run a make. make[1]: Leaving directory '/build/filter-2.6.3+ds1' dh_auto_build dh_auto_build: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 make[1]: Entering directory '/build/filter-2.6.3+ds1' /bin/chmod u+w defs.h /bin/touch defs.h cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o actions.o actions.c actions.c:200:1: warning: return type defaults to 'int' [-Wimplicit-int] 200 | mail_message(address, fptr,resendflag) | ^~~~~~~~~~~~ actions.c: In function 'mail_message': actions.c:255:7: warning: implicit declaration of function 'wait' [-Wimplicit-function-declaration] 255 | wait(&statusp); | ^~~~ actions.c:292:7: warning: implicit declaration of function 'lock'; did you mean 'lockf'? [-Wimplicit-function-declaration] 292 | if (!lock()) { | ^~~~ | lockf actions.c:336:2: warning: implicit declaration of function 'unlock'; did you mean 'unlink'? [-Wimplicit-function-declaration] 336 | unlock(); /* blamo or not? Let it decide! */ | ^~~~~~ | unlink actions.c: In function 'save_message': actions.c:393:13: warning: implicit declaration of function 'save_to_folder' [-Wimplicit-function-declaration] 393 | ret = save_to_folder(foldername,tmpfptr); | ^~~~~~~~~~~~~~ actions.c: In function 'mail_message': actions.c:269:7: warning: ignoring return value of 'setuid' declared with attribute 'warn_unused_result' [-Wunused-result] 269 | setuid(user_uid); | ^~~~~~~~~~~~~~~~ actions.c:270:7: warning: ignoring return value of 'setgid' declared with attribute 'warn_unused_result' [-Wunused-result] 270 | setgid(user_gid); | ^~~~~~~~~~~~~~~~ actions.c: In function 'execute': actions.c:544:3: warning: ignoring return value of 'setgid' declared with attribute 'warn_unused_result' [-Wunused-result] 544 | setgid(user_gid); | ^~~~~~~~~~~~~~~~ actions.c:545:3: warning: ignoring return value of 'setuid' declared with attribute 'warn_unused_result' [-Wunused-result] 545 | setuid(user_uid); | ^~~~~~~~~~~~~~~~ actions.c:549:3: warning: ignoring return value of 'dup' declared with attribute 'warn_unused_result' [-Wunused-result] 549 | dup(tmpfd); | ^~~~~~~~~~ cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o filter.o filter.c filter.c:154:1: warning: return type defaults to 'int' [-Wimplicit-int] 154 | main(argc, argv) | ^~~~ filter.c: In function 'main': filter.c:338:15: warning: implicit declaration of function 'get_filter_rules' [-Wimplicit-function-declaration] 338 | if (get_filter_rules() == -1) { | ^~~~~~~~~~~~~~~~ filter.c:343:4: warning: implicit declaration of function 'show_summary' [-Wimplicit-function-declaration] 343 | show_summary(); | ^~~~~~~~~~~~ filter.c:353:6: warning: implicit declaration of function 'print_rules' [-Wimplicit-function-declaration] 353 | print_rules(); | ^~~~~~~~~~~ filter.c:427:4: warning: implicit declaration of function 'mail_message' [-Wimplicit-function-declaration] 427 | mail_message(username,tmpfptr); | ^~~~~~~~~~~~ filter.c:429:17: warning: implicit declaration of function 'action_from_ruleset' [-Wimplicit-function-declaration] 429 | int action = action_from_ruleset(); | ^~~~~~~~~~~~~~~~~~~ filter.c:432:6: warning: implicit declaration of function 'expand_macros' [-Wimplicit-function-declaration] 432 | expand_macros(rules[rule_choosen].argument2, action_argument, | ^~~~~~~~~~~~~ filter.c:453:30: warning: implicit declaration of function 'save_message' [-Wimplicit-function-declaration] 453 | case SAVE : exit_stat=save_message(rules[rule_choosen].argument2, | ^~~~~~~~~~~~ filter.c:487:10: warning: implicit declaration of function 'execute'; did you mean 'execle'? [-Wimplicit-function-declaration] 487 | execute(rules[rule_choosen].argument2,tmpfptr); | ^~~~~~~ | execle filter.c: In function 'save_embedded_address': filter.c:810:6: warning: implicit declaration of function 'istrcmp'; did you mean 'strcmp'? [-Wimplicit-function-declaration] 810 | if (istrcmp(fieldname, "Reply-To:") == 0){ | ^~~~~~~ | strcmp cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o lock.o lock.c lock.c: In function 'clearoldlock': lock.c:222:8: warning: implicit declaration of function 'kill' [-Wimplicit-function-declaration] 222 | if (kill(lockpid, 0)) { | ^~~~ In file included from /usr/include/string.h:495, from defs.h:407, from lock.c:67: In function 'strncat', inlined from 'lock' at lock.c:366:2: /usr/include/i386-linux-gnu/bits/string_fortified.h:136:10: warning: '__builtin___strncat_chk' specified bound 256 equals destination size [-Wstringop-overflow=] 136 | return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o parse.o parse.c parse.c: In function 'get_filter_rules': parse.c:481:10: warning: implicit declaration of function 'expand_macros' [-Wimplicit-function-declaration] 481 | expand_macros(action_argument, rules[total_rules].argument2, | ^~~~~~~~~~~~~ In file included from /usr/include/string.h:495, from defs.h:407, from parse.c:100: In function 'strncat', inlined from 'get_filter_rules' at parse.c:395:5: /usr/include/i386-linux-gnu/bits/string_fortified.h:136:10: warning: '__builtin___strncat_chk' specified bound 256 equals destination size [-Wstringop-overflow=] 136 | return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o regexp.o regexp.c cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o rules.o rules.c cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o summarize.o summarize.c cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o utils.o utils.c cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o audit.o audit.c cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o istrcmp.o istrcmp.c istrcmp.c:37:18: warning: extra tokens at end of #include directive 37 | #include "defs.h"; | ^ cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o mk_lockname.o mk_lockname.c cc -g -O2 -fdebug-prefix-map=/build/filter-2.6.3+ds1=. -fstack-protector-strong -Wdate-time -D_FORTIFY_SOURCE=2 -c -o strtokq.o strtokq.c cc -Wl,-z,relro -Wl,-z,now -o filter actions.o filter.o lock.o parse.o regexp.o rules.o summarize.o utils.o audit.o istrcmp.o mk_lockname.o strtokq.o make[1]: Leaving directory '/build/filter-2.6.3+ds1' dh_auto_test dh_auto_test: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 test make[1]: Entering directory '/build/filter-2.6.3+ds1' cat test.sh >test chmod a+x test make[1]: Leaving directory '/build/filter-2.6.3+ds1' fakeroot debian/rules binary dh binary dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_testroot dh_prep dh_installdirs dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_auto_install dh_auto_install: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 install DESTDIR=/build/filter-2.6.3\+ds1/debian/filter AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/filter-2.6.3+ds1' /bin/mv /build/filter-2.6.3+ds1/debian/filter/usr/bin/filter /build/filter-2.6.3+ds1/debian/filter/usr/bin/filter.old /bin/mv: cannot stat '/build/filter-2.6.3+ds1/debian/filter/usr/bin/filter': No such file or directory make[1]: [Makefile:101: /build/filter-2.6.3+ds1/debian/filter/usr/bin/filter] Error 1 (ignored) /bin/rm -f /build/filter-2.6.3+ds1/debian/filter/usr/bin/filter.old /bin/cp filter /build/filter-2.6.3+ds1/debian/filter/usr/bin/filter /bin/chgrp mail /build/filter-2.6.3+ds1/debian/filter/usr/bin/filter /bin/chmod 2755 /build/filter-2.6.3+ds1/debian/filter/usr/bin/filter (cd doc && /usr/bin/make DESTDIR=/build/filter-2.6.3+ds1/debian/filter -w -j1 install) make[2]: Entering directory '/build/filter-2.6.3+ds1/doc' make[3]: Entering directory '/build/filter-2.6.3+ds1/doc' /bin/cp filter.1 /build/filter-2.6.3+ds1/debian/filter/usr/share/man/man1/filter.1 /bin/chmod u=rw,go=r /build/filter-2.6.3+ds1/debian/filter/usr/share/man/man1/filter.1 make[3]: Leaving directory '/build/filter-2.6.3+ds1/doc' make[2]: Leaving directory '/build/filter-2.6.3+ds1/doc' make[1]: Leaving directory '/build/filter-2.6.3+ds1' dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installchangelogs dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installman dh_installman: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_perl dh_link dh_strip_nondeterminism dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_fixperms dh_missing dh_missing: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_makeshlibs dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'filter' in '../filter_2.6.3+ds1-3_i386.deb'. dpkg-deb: building package 'filter-dbgsym' in '../filter-dbgsym_2.6.3+ds1-3_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../filter_2.6.3+ds1-3_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/56689 and its subdirectories I: Current time: Mon Jul 4 21:14:40 -12 2022 I: pbuilder-time-stamp: 1657012480 Wed Jun 2 02:51:43 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ionos12-i386.debian.net. Wed Jun 2 02:51:43 UTC 2021 I: Preparing to do remote build '2' on ionos12-i386.debian.net. Wed Jun 2 03:00:26 UTC 2021 I: Deleting $TMPDIR on ionos12-i386.debian.net. Wed Jun 2 03:00:52 UTC 2021 I: filter_2.6.3+ds1-3_i386.changes: Format: 1.8 Date: Sun, 21 Feb 2016 16:27:04 +0100 Source: filter Binary: filter filter-dbgsym Architecture: i386 Version: 2.6.3+ds1-3 Distribution: unstable Urgency: low Maintainer: Debian QA Group Changed-By: Axel Beckert Description: filter - program that filters local email via forward/pipe Closes: 815438 Changes: filter (2.6.3+ds1-3) unstable; urgency=low . * QA upload. * Fix more implicit function declarations, this time in audit.c, strtokq.c and istrcmp.c. This also fixes segfaults during logging on amd64 (and probably more 64-bit platforms). (Closes: #815438) Checksums-Sha1: 1f9ae4575fd8ad639519493f9d4947cc4ea2bacf 59264 filter-dbgsym_2.6.3+ds1-3_i386.deb 5f0b4bdc6ac4861fb37bfd5b5751c8b13d923fce 4841 filter_2.6.3+ds1-3_i386.buildinfo e381897053220f4bd7455ec6127597c3b0e4fee9 34996 filter_2.6.3+ds1-3_i386.deb Checksums-Sha256: 4315bb58bad674a49d007abdd2861e838d758d607feb83a14698fdb13a46eefa 59264 filter-dbgsym_2.6.3+ds1-3_i386.deb 417c20b1d509de2899639d3b050f7eeddffc6179fae3c3ec95d9ce0782323131 4841 filter_2.6.3+ds1-3_i386.buildinfo 8dd82af8c716f39480c3a0449c9eeff4d4767f74c933b24eb024a5b4a7d0da31 34996 filter_2.6.3+ds1-3_i386.deb Files: 9f2a02aa39eaebd3a84025413d91af98 59264 debug optional filter-dbgsym_2.6.3+ds1-3_i386.deb 9c1dd501fa30b1345f1881350ee1751c 4841 mail optional filter_2.6.3+ds1-3_i386.buildinfo 440bc985be9f871916c68f69e667a47d 34996 mail optional filter_2.6.3+ds1-3_i386.deb Wed Jun 2 03:00:53 UTC 2021 I: diffoscope 172 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.gVaPEzyQKY/filter_2.6.3+ds1-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.gVaPEzyQKY/filter_2.6.3+ds1-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.gVaPEzyQKY/filter_2.6.3+ds1-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.gVaPEzyQKY/b1/filter_2.6.3+ds1-3_i386.changes /srv/reproducible-results/rbuild-debian/tmp.gVaPEzyQKY/b2/filter_2.6.3+ds1-3_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.266s) 0.266s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.019s) 0.019s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Wed Jun 2 03:00:54 UTC 2021 I: diffoscope 172 found no differences in the changes files, and a .buildinfo file also exists. Wed Jun 2 03:00:54 UTC 2021 I: filter from bullseye built successfully and reproducibly on i386. Wed Jun 2 03:00:56 UTC 2021 I: Submitting .buildinfo files to external archives: Wed Jun 2 03:00:56 UTC 2021 I: Submitting 8.0K b1/filter_2.6.3+ds1-3_i386.buildinfo.asc Wed Jun 2 03:00:57 UTC 2021 I: Submitting 8.0K b2/filter_2.6.3+ds1-3_i386.buildinfo.asc Wed Jun 2 03:00:59 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Jun 2 03:00:59 UTC 2021 I: Done submitting .buildinfo files. Wed Jun 2 03:00:59 UTC 2021 I: Removing signed filter_2.6.3+ds1-3_i386.buildinfo.asc files: removed './b1/filter_2.6.3+ds1-3_i386.buildinfo.asc' removed './b2/filter_2.6.3+ds1-3_i386.buildinfo.asc'