Thu Jul 22 13:26:34 UTC 2021 I: starting to build wiki2beamer/bullseye/armhf on jenkins on '2021-07-22 13:26' Thu Jul 22 13:26:34 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_40/1547/console.log Thu Jul 22 13:26:34 UTC 2021 I: Downloading source for bullseye/wiki2beamer=0.10.0-4 --2021-07-22 13:26:34-- http://cdn-fastly.deb.debian.org/debian/pool/main/w/wiki2beamer/wiki2beamer_0.10.0-4.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1894 (1.8K) Saving to: ‘wiki2beamer_0.10.0-4.dsc’ 0K . 100% 264M=0s 2021-07-22 13:26:34 (264 MB/s) - ‘wiki2beamer_0.10.0-4.dsc’ saved [1894/1894] Thu Jul 22 13:26:34 UTC 2021 I: wiki2beamer_0.10.0-4.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: wiki2beamer Binary: wiki2beamer Architecture: all Version: 0.10.0-4 Maintainer: Francisco M Neto Homepage: https://wiki2beamer.github.io/ Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/debian/wiki2beamer Vcs-Git: https://salsa.debian.org/debian/wiki2beamer.git Build-Depends: debhelper-compat (= 13), dh-sequence-python3, asciidoctor Package-List: wiki2beamer deb text optional arch=all Checksums-Sha1: 02e3923575b0fe88ba5d9f2c2bb84eb75a7a28d2 164911 wiki2beamer_0.10.0.orig.tar.gz 057bd45e84eb2c87856c5d88bb369d17b7156762 3372 wiki2beamer_0.10.0-4.debian.tar.xz Checksums-Sha256: e9662674cbf6b859bc1847e0dfa9cc89b1c2e1d1e0f727285de9a374875cb6a7 164911 wiki2beamer_0.10.0.orig.tar.gz dff466fee06ab778aa57a54de8f984b42082fd0425ef4815a5fa039f6c266bd6 3372 wiki2beamer_0.10.0-4.debian.tar.xz Files: 04bbf102ef80ccd6bfd26e2833070693 164911 wiki2beamer_0.10.0.orig.tar.gz 085f1eb631908908d1871a38dd5efc30 3372 wiki2beamer_0.10.0-4.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEfncpR22H1vEdkazLwpPntGGCWs4FAl9mkkwACgkQwpPntGGC Ws5cEA//Vo73CIeDTzdylStmy14w0xU1aT8F3Gr7poYW7KIUd3IXcckwrK40xtw4 LC0aPIvsrQrDr1Ji9CqwHNk8AAI++B2cqSDl428YxFzqlN0I9LB+fQW40nVHKo+5 x2L4rF9ZdDJkbOGOTRGlzWMEJmwlo/84qqWbXe5lqz4J7ZMYTSxmy+2jR++eV+gM 7qYi+ZT5cmYAsm8qE74+HGPgJqTuJ0k6ZyAoHkVzb/fz1zS01t7b8QzqwA0az9Xh jJe/oq3m9GHpkPn3msUUj8shLB6ItP38i14ueOafproVNNGqh63J+FgTv4wGGTM7 VM47MnAnGFciRKg93ViPhGRMVZSviXdIYkPMKRdtKIOVogVQlLiYdGmz8bssdBZJ SKX7y4dUHMlJptS+SKxXRq5xiMgn7Ojsyl6NnUvu8lIzPH4pCtnG3vlGh2CbI1mE idE0+j9NbNVAIFEK9iXJGCXJGTkE6pbgYNQV5CDXjJ4fcVR1IzSTxkeokk+USH9V xSxt3iAjEex32qZ9rIAEaAdlvha9307+ZlAsThBRMKr6KaHU+Qin8CK0aYL3kRes 5uaxHLBYjI73g38pGmGuH3e0N3N4bLD855/06Trh9cMF9K6RtEYsLuCQO2Qaf1IF 7XwIiOGrXRZ8MBtH8r8INSrJHS4jtoc1dSYjDxIPZyExQ5/dVF4= =HLFz -----END PGP SIGNATURE----- Thu Jul 22 13:26:34 UTC 2021 I: Checking whether the package is not for us Thu Jul 22 13:26:34 UTC 2021 I: Starting 1st build on remote node jtx1b-armhf-rb.debian.net. Thu Jul 22 13:26:34 UTC 2021 I: Preparing to do remote build '1' on jtx1b-armhf-rb.debian.net. Thu Jul 22 13:29:14 UTC 2021 I: Deleting $TMPDIR on jtx1b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Jul 22 01:26:46 -12 2021 I: pbuilder-time-stamp: 1626960406 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [wiki2beamer_0.10.0-4.dsc] I: copying [./wiki2beamer_0.10.0.orig.tar.gz] I: copying [./wiki2beamer_0.10.0-4.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.8Rh7c_CG/trustedkeys.kbx': General error gpgv: Signature made Sat Sep 19 11:20:44 2020 -12 gpgv: using RSA key 7E7729476D87D6F11D91ACCBC293E7B461825ACE gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./wiki2beamer_0.10.0-4.dsc dpkg-source: info: extracting wiki2beamer in wiki2beamer-0.10.0 dpkg-source: info: unpacking wiki2beamer_0.10.0.orig.tar.gz dpkg-source: info: unpacking wiki2beamer_0.10.0-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 010_fix-doc-makefile.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/10678/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='bd43bb52c7b04a2ca52c389d9d3b7bd7' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='10678' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.OTGbjPfQuR/pbuilderrc_EseC --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.OTGbjPfQuR/b1 --logfile b1/build.log wiki2beamer_0.10.0-4.dsc' SUDO_GID='114' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux jtx1b 5.10.0-7-arm64 #1 SMP Debian 5.10.40-1 (2021-05-28) aarch64 GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Jun 21 14:26 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Feb 7 02:38 more -rwsr-xr-x 1 root root 34400 Feb 7 02:38 mount -rwxr-xr-x 1 root root 9824 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 14:26 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 21 21:25 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Feb 7 02:38 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 21:55 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Feb 7 02:38 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/10678/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-sequence-python3, asciidoctor dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-python3; however: Package dh-sequence-python3 is not installed. pbuilder-satisfydepends-dummy depends on asciidoctor; however: Package asciidoctor is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: asciidoctor{a} autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libdebhelper-perl{a} libedit2{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libmd0{a} libmpdec3{a} libpipeline1{a} libpython3-stdlib{a} libpython3.9-minimal{a} libpython3.9-stdlib{a} libreadline8{a} libruby2.7{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-0-2{a} m4{a} man-db{a} media-types{a} openssl{a} po-debconf{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3.9{a} python3.9-minimal{a} rake{a} readline-common{a} ruby{a} ruby-asciidoctor{a} ruby-minitest{a} ruby-net-telnet{a} ruby-power-assert{a} ruby-rubygems{a} ruby-test-unit{a} ruby-xmlrpc{a} ruby2.7{a} rubygems-integration{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl fonts-lato libarchive-cpio-perl libjs-jquery libltdl-dev libmail-sendmail-perl lynx wget zip 0 packages upgraded, 65 newly installed, 0 to remove and 0 not upgraded. Need to get 29.8 MB of archives. After unpacking 104 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-7 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf libpython3.9-minimal armhf 3.9.2-1 [790 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libexpat1 armhf 2.2.10-2 [76.3 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf python3.9-minimal armhf 3.9.2-1 [1630 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf python3-minimal armhf 3.9.2-3 [38.2 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf media-types all 4.0.0 [30.3 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libmpdec3 armhf 2.5.1-1 [74.9 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf readline-common all 8.1-1 [73.7 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf libreadline8 armhf 8.1-1 [147 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf libpython3.9-stdlib armhf 3.9.2-1 [1608 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf python3.9 armhf 3.9.2-1 [466 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf libpython3-stdlib armhf 3.9.2-3 [21.4 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf python3 armhf 3.9.2-3 [37.9 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf openssl armhf 1.1.1k-1 [826 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf ca-certificates all 20210119 [158 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf rubygems-integration all 1.18 [6704 B] Get: 26 http://deb.debian.org/debian bullseye/main armhf rake all 13.0.3-1 [84.7 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf ruby-minitest all 5.13.0-1 [57.3 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf ruby-net-telnet all 0.1.1-2 [12.5 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf ruby-power-assert all 1.1.7-2 [11.5 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf ruby-test-unit all 3.3.9-1 [86.1 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf ruby-xmlrpc all 0.3.0-2 [23.7 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf libmd0 armhf 1.0.3-3 [27.4 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf libbsd0 armhf 0.11.3-1 [103 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libedit2 armhf 3.1-20191231-2+b1 [81.1 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf libyaml-0-2 armhf 0.2.2-1 [42.0 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf libruby2.7 armhf 2.7.4-1 [3956 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf ruby2.7 armhf 2.7.4-1 [747 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf ruby-rubygems all 3.2.5-2 [281 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf ruby armhf 1:2.7+2 [11.7 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf ruby-asciidoctor all 2.0.12-2 [206 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf asciidoctor all 2.0.12-2 [83.9 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 46 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 47 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 48 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 49 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 50 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 51 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 52 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 53 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 54 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 55 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 56 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 57 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 58 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 59 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 60 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 61 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 62 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 63 http://deb.debian.org/debian bullseye/main armhf python3-lib2to3 all 3.9.2-1 [77.8 kB] Get: 64 http://deb.debian.org/debian bullseye/main armhf python3-distutils all 3.9.2-1 [143 kB] Get: 65 http://deb.debian.org/debian bullseye/main armhf dh-python all 4.20201102+nmu1 [99.4 kB] Fetched 29.8 MB in 8s (3695 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../0-bsdextrautils_2.36.1-7_armhf.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../1-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../2-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../3-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../4-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package libpython3.9-minimal:armhf. Preparing to unpack .../5-libpython3.9-minimal_3.9.2-1_armhf.deb ... Unpacking libpython3.9-minimal:armhf (3.9.2-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../6-libexpat1_2.2.10-2_armhf.deb ... Unpacking libexpat1:armhf (2.2.10-2) ... Selecting previously unselected package python3.9-minimal. Preparing to unpack .../7-python3.9-minimal_3.9.2-1_armhf.deb ... Unpacking python3.9-minimal (3.9.2-1) ... Setting up libpython3.9-minimal:armhf (3.9.2-1) ... Setting up libexpat1:armhf (2.2.10-2) ... Setting up python3.9-minimal (3.9.2-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20265 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.9.2-3_armhf.deb ... Unpacking python3-minimal (3.9.2-3) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_4.0.0_all.deb ... Unpacking media-types (4.0.0) ... Selecting previously unselected package libmpdec3:armhf. Preparing to unpack .../2-libmpdec3_2.5.1-1_armhf.deb ... Unpacking libmpdec3:armhf (2.5.1-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) ... Selecting previously unselected package libreadline8:armhf. Preparing to unpack .../4-libreadline8_8.1-1_armhf.deb ... Unpacking libreadline8:armhf (8.1-1) ... Selecting previously unselected package libpython3.9-stdlib:armhf. Preparing to unpack .../5-libpython3.9-stdlib_3.9.2-1_armhf.deb ... Unpacking libpython3.9-stdlib:armhf (3.9.2-1) ... Selecting previously unselected package python3.9. Preparing to unpack .../6-python3.9_3.9.2-1_armhf.deb ... Unpacking python3.9 (3.9.2-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.9.2-3_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.9.2-3) ... Setting up python3-minimal (3.9.2-3) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20686 files and directories currently installed.) Preparing to unpack .../00-python3_3.9.2-3_armhf.deb ... Unpacking python3 (3.9.2-3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package openssl. Preparing to unpack .../02-openssl_1.1.1k-1_armhf.deb ... Unpacking openssl (1.1.1k-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../03-ca-certificates_20210119_all.deb ... Unpacking ca-certificates (20210119) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../05-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package rubygems-integration. Preparing to unpack .../08-rubygems-integration_1.18_all.deb ... Unpacking rubygems-integration (1.18) ... Selecting previously unselected package rake. Preparing to unpack .../09-rake_13.0.3-1_all.deb ... Unpacking rake (13.0.3-1) ... Selecting previously unselected package ruby-minitest. Preparing to unpack .../10-ruby-minitest_5.13.0-1_all.deb ... Unpacking ruby-minitest (5.13.0-1) ... Selecting previously unselected package ruby-net-telnet. Preparing to unpack .../11-ruby-net-telnet_0.1.1-2_all.deb ... Unpacking ruby-net-telnet (0.1.1-2) ... Selecting previously unselected package ruby-power-assert. Preparing to unpack .../12-ruby-power-assert_1.1.7-2_all.deb ... Unpacking ruby-power-assert (1.1.7-2) ... Selecting previously unselected package ruby-test-unit. Preparing to unpack .../13-ruby-test-unit_3.3.9-1_all.deb ... Unpacking ruby-test-unit (3.3.9-1) ... Selecting previously unselected package ruby-xmlrpc. Preparing to unpack .../14-ruby-xmlrpc_0.3.0-2_all.deb ... Unpacking ruby-xmlrpc (0.3.0-2) ... Selecting previously unselected package libmd0:armhf. Preparing to unpack .../15-libmd0_1.0.3-3_armhf.deb ... Unpacking libmd0:armhf (1.0.3-3) ... Selecting previously unselected package libbsd0:armhf. Preparing to unpack .../16-libbsd0_0.11.3-1_armhf.deb ... Unpacking libbsd0:armhf (0.11.3-1) ... Selecting previously unselected package libedit2:armhf. Preparing to unpack .../17-libedit2_3.1-20191231-2+b1_armhf.deb ... Unpacking libedit2:armhf (3.1-20191231-2+b1) ... Selecting previously unselected package libyaml-0-2:armhf. Preparing to unpack .../18-libyaml-0-2_0.2.2-1_armhf.deb ... Unpacking libyaml-0-2:armhf (0.2.2-1) ... Selecting previously unselected package libruby2.7:armhf. Preparing to unpack .../19-libruby2.7_2.7.4-1_armhf.deb ... Unpacking libruby2.7:armhf (2.7.4-1) ... Selecting previously unselected package ruby2.7. Preparing to unpack .../20-ruby2.7_2.7.4-1_armhf.deb ... Unpacking ruby2.7 (2.7.4-1) ... Selecting previously unselected package ruby-rubygems. Preparing to unpack .../21-ruby-rubygems_3.2.5-2_all.deb ... Unpacking ruby-rubygems (3.2.5-2) ... Selecting previously unselected package ruby. Preparing to unpack .../22-ruby_1%3a2.7+2_armhf.deb ... Unpacking ruby (1:2.7+2) ... Selecting previously unselected package ruby-asciidoctor. Preparing to unpack .../23-ruby-asciidoctor_2.0.12-2_all.deb ... Unpacking ruby-asciidoctor (2.0.12-2) ... Selecting previously unselected package asciidoctor. Preparing to unpack .../24-asciidoctor_2.0.12-2_all.deb ... Unpacking asciidoctor (2.0.12-2) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../25-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../26-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../27-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../28-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../29-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../30-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../31-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../32-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../33-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../34-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../35-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../36-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../37-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../38-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../39-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../40-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../41-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../42-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../43-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../44-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../45-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../46-python3-lib2to3_3.9.2-1_all.deb ... Unpacking python3-lib2to3 (3.9.2-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../47-python3-distutils_3.9.2-1_all.deb ... Unpacking python3-distutils (3.9.2-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../48-dh-python_4.20201102+nmu1_all.deb ... Unpacking dh-python (4.20201102+nmu1) ... Setting up media-types (4.0.0) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up ruby-power-assert (1.1.7-2) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-0-2:armhf (0.2.2-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up ruby-minitest (5.13.0-1) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up ruby-test-unit (3.3.9-1) ... Setting up ruby-net-telnet (0.1.1-2) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libmd0:armhf (1.0.3-3) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libmpdec3:armhf (2.5.1-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up openssl (1.1.1k-1) ... Setting up libbsd0:armhf (0.11.3-1) ... Setting up libelf1:armhf (0.183-1) ... Setting up readline-common (8.1-1) ... Setting up ruby-xmlrpc (0.3.0-2) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libedit2:armhf (3.1-20191231-2+b1) ... Setting up libreadline8:armhf (8.1-1) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 129 added, 0 removed; done. Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up libpython3.9-stdlib:armhf (3.9.2-1) ... Setting up libpython3-stdlib:armhf (3.9.2-3) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up rubygems-integration (1.18) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up python3.9 (3.9.2-1) ... Setting up debhelper (13.3.4) ... Setting up python3 (3.9.2-3) ... Setting up python3-lib2to3 (3.9.2-1) ... Setting up python3-distutils (3.9.2-1) ... Setting up dh-python (4.20201102+nmu1) ... Setting up ruby2.7 (2.7.4-1) ... Setting up ruby-rubygems (3.2.5-2) ... Setting up ruby (1:2.7+2) ... Setting up ruby-asciidoctor (2.0.12-2) ... Setting up rake (13.0.3-1) ... Setting up asciidoctor (2.0.12-2) ... Setting up libruby2.7:armhf (2.7.4-1) ... Processing triggers for libc-bin (2.31-12) ... Processing triggers for ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/wiki2beamer-0.10.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../wiki2beamer_0.10.0-4_source.changes dpkg-buildpackage: info: source package wiki2beamer dpkg-buildpackage: info: source version 0.10.0-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Francisco M Neto dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean debian/rules execute_after_dh_auto_clean make[1]: Entering directory '/build/wiki2beamer-0.10.0' [ ! -f doc/man/Makefile ] || /usr/bin/make -C /build/wiki2beamer-0.10.0/doc/man/ clean make[2]: Entering directory '/build/wiki2beamer-0.10.0/doc/man' rm -f wiki2beamer.1 rm -f wiki2beamer.html rm -f man1/wiki2beamer.1.bz2 [ ! -d man1 ] || rmdir man1/ make[2]: Leaving directory '/build/wiki2beamer-0.10.0/doc/man' make[1]: Leaving directory '/build/wiki2beamer-0.10.0' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf debian/rules execute_after_dh_auto_build make[1]: Entering directory '/build/wiki2beamer-0.10.0' /usr/bin/make -C /build/wiki2beamer-0.10.0/doc/man/ make[2]: Entering directory '/build/wiki2beamer-0.10.0/doc/man' mkdir man1 WIKI2BEAMER(1) WIKI2BEAMER WIKI2BEAMER(1) NAME wiki2beamer - convert wiki-formatted text to latex-beamer code SYNOPSIS wiki2beamer [OPTION...] [FILE...] DESCRIPTION FILE the text-file(s) to be processed -h, --help show a short usage help --version show version information -o,--output FILE write output to FILE instead of stdout USAGE Usually you want to pipe the output of wiki2beamer into a file: wiki2beamer footalk.txt > footalk.tex If called with multiple input files, wiki2beamer processes them in order with their content being simply concatenated. If called without any input file, wiki2beamer will attempt to read input from STDIN. If no input files are supplied and nothing is available on STDIN, wiki2beamer prints its usage message and exits. If an error occurs, wiki2beamer returns a return code other then 0. SYNTAX Wiki2beamer has it's own wiki-syntax which (evolved without much of a concept ;) and) is described below. Everything that is unknown to wiki2beamer will be passed through to the LaTeX output (unless inside special environments). Overall Structure A wiki2beamer txt file can consist of two sections: the head and the body. The head is optional and is an autotemplate environment. The body contains the content of the document. If the head (autotemplate) is not given, then only the code for the body will be generated and can be included into a manually crafted LaTeX template file. Managing Input You can split input to wiki2beamer into multiple files. This helps to keep things apart and avoids conflicts. There are two ways to split input. The first is to use multiple input files which wiki2beamer will read and process in order as if they were one concatenated file. The second is to use the >>>include<<< syntax. >>>includefile<<< Include the file named includefile at this line. Works recursively. Endless recursion will be detected and treated as an error. Including files doesn't work inside [nowiki] and [code] environments (see below). Structuring the Presentation == sectionname == opens a section called sectionname == longsectionname ==[shortname] opens a section called longsectionname, passing the parameter shortname to latex === subsectname === opens a subsection called subsectname === longsubsectname ===[shortname] opens a subsection called longsubsectname, passing the parameter shortname to latex ==== frametitle ====_ opens a frame with the title frametitle ==== frametitle ====[param] opens a frame with the title frametitle, passes frame parameters like t, fragile, verbatim etc. to latex !==== frametitle ====[param] the ! added in front of a frame, selects a frame for exclusive generation. It makes wiki2beamer skip all frames that are not selected. You can select multiple frames. This can speed up the edit-compile-view cycle massively. Sectioning commands work only at the beginning of a line. Lists (Bullets/Enumerations) * text create a bullet (itemize) with text * text create a bullet (itemize) with text that only appears on the specified slides (onslide) # text create a numbered item (enumerate) with text # text create a numbered item (enumerate) with text that only appears on the specified slides (onslide) Cascaded lists, mixed ordered and unordered items: * This is a crazy list. *# It contains different items. *# In different formats. *** On different levels. ***<2-> which are animated *<3-> Quite a lot of fun. **<4-> Isn't it? Environments LaTeX knows many environments, some of which are as simple as \begin{center} \end{center}, others are more complicated. To use these in a more wiki-like fashion, use <[name] to open and [name]> to close environments. It will be simply converted to \begin{name} and end{name}. Warning No parsing is done. The user is responsible for closing any opened environment. Environment-tags are only recognized at the beginning of a line. Special Environments Unlike standard environments, some environment names are recognized by wiki2beamer. These are: nowiki, code, autotemplate and frame. If wiki2beamer detects one of these it will do some advanced parsing, which can even fail with a syntax error. Autotemplate Autotemplate can be used at the beginning of a beamer .txt file. It will create the required LaTeX headers to compile the content. <[autotemplate] opens the autotemplate environment [autotemplate]> close the autotemplate environment key=value (inside [autotemplate])_ insert a template command \keyvalue key=value pairs are converted to \keyvalue in the output (except special keys) -- everything after = is just appended to \key. <[autotemplate] usepackage=[utf8]{inputenc} [autotemplate]> will be converted to \usepackage[utf8]{inputenc}. There is a built-in set of options: <[autotemplate] documentclass={beamer} usepackage={listings} usepackage={wasysym} usepackage={graphicx} date={\today} lstdefinestyle={basic}{....} titleframe=True [autotemplate]> titleframe is a special key that tells wiki2beamer to create a title frame. To set the title, subtitle and author of the presentation use the keys title, subtitle and author. Overriding of the default options works on: o per-key level for: documentclass, titleframe o per-package level for: usepackage o no overriding for: everything else Code Use code-environments to display animated code listings. <[code] open a code environment <[code][param] open a code environment passing parameters to the latex lstlisting environment. [code]> close the code environment <[code][key=value,...] ... [code]> <[code] opens the environment, [code]> closes it, everything after <[code] is passed to the LaTeX listings package as options for this listing. Inside the code environment, [ and ] must be escaped as \[ and \]. Things between [ and ] are animations. There are two kinds of animations: o [some code] - show "some code" only on specified slides o [[some code][some other code]] - show "some code" on the slides in the first spec, show "some other code" on the slides in the second spec, fill up space on slides without content with spaces Slide-specs can be of the form: o n - one single frame n o n-m - sequence of frames n to m o spec,spec,... - combine multiple specs into on (e.g. <1-3,5>) Nowiki Nowiki-Environments completely escape from wiki2beamer replacements. <[nowiki] opens the environment, [nowiki]> closes it. Frame The LaTeX-frame environment is where the content of a slide goes. You can manually close a frame-environment which was opened with ==== Frametitle ==== with [frame]>. Wiki2beamer is then aware that the last frame is already closed and doesn't try to close it again. Text Formatting '''text''' typeset text bold ''text'' typeset text italic @text@ typeset text in typewriter type, to ignore an @, escape it as \@ !text! alert text, to ignore an !, escape it as \! _ color _ text _ make text appear in color Columns <[columns] opens the column environment [[[ width ]]] creates a column of width, everything below goes into this column [columns]> closes the column environment Graphics <<>> include image from pathtofile <<>> include image from pathtofile passing key=value parameters to latex Footnotes create a footnote containing text Layout --length-- when found at start of line, with nothing afterwards, insert a \vspace{length} (vertical space of length length) --*length-- same as above, but insert a \vspace* (a forced vspace) +<_overlay_>{content} \uncover the content on the given overlay subframes. They will already take up the space, they need to be displayed, so the geometry of the frame doesn't change when the element pops up. -<_overlay_>{content} \only show the content on the given overlay subframes. They will not take up the space they need to be displayed, so the geometry of the frame changes when the element pops up. Substitutions --> becomes $\rightarrow$ ==> becomes $\Rightarrow$ <-- becomes $\leftarrow$ <== becomes $\Leftarrow$ :-) becomes \smiley (requires package wasysym) :-( becomes \frownie (requires package wasysym) Frame Headers/Footers There are two variables, FRAMEHEADER and FRAMEFOOTER. The content of these will be inserted at the beginning/end of all following slides. @FRAMEHEADER=text set frameheader to text @FRAMEFOOTER=text set framefooter to text Leave text empty to reset frame headers and footers. LICENSE Copyright (C) 2009 Kai Dietrich, Michael Rentzsch and others. Documentation License Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; Code License wiki2beamer is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. AUTHOR wiki2beamer developers WIKI2BEAMER 2020-09-15 WIKI2BEAMER(1) asciidoctor -b html5 -d manpage wiki2beamer.adoc make[2]: Leaving directory '/build/wiki2beamer-0.10.0/doc/man' make[1]: Leaving directory '/build/wiki2beamer-0.10.0' create-stamp debian/debhelper-build-stamp dh_prep dh_install dh_installdocs dh_installchangelogs dh_installexamples dh_installman debian/rules override_dh_python3 make[1]: Entering directory '/build/wiki2beamer-0.10.0' dh_python3 --shebang=/usr/bin/python3 I: dh_python3 tools:114: replacing shebang in debian/wiki2beamer/usr/bin/wiki2beamer make[1]: Leaving directory '/build/wiki2beamer-0.10.0' dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'wiki2beamer' in '../wiki2beamer_0.10.0-4_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../wiki2beamer_0.10.0-4_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/10678 and its subdirectories I: Current time: Thu Jul 22 01:29:06 -12 2021 I: pbuilder-time-stamp: 1626960546 Thu Jul 22 13:29:18 UTC 2021 I: 1st build successful. Starting 2nd build on remote node wbq0-armhf-rb.debian.net. Thu Jul 22 13:29:18 UTC 2021 I: Preparing to do remote build '2' on wbq0-armhf-rb.debian.net. Thu Jul 22 13:39:41 UTC 2021 I: Deleting $TMPDIR on wbq0-armhf-rb.debian.net. Thu Jul 22 13:39:43 UTC 2021 I: wiki2beamer_0.10.0-4_armhf.changes: Format: 1.8 Date: Tue, 15 Sep 2020 16:50:06 +0000 Source: wiki2beamer Binary: wiki2beamer Architecture: all Version: 0.10.0-4 Distribution: unstable Urgency: medium Maintainer: Francisco M Neto Changed-By: Francisco M Neto Description: wiki2beamer - Tool to create LaTeX beamer presentations in wiki syntax Closes: 968620 Changes: wiki2beamer (0.10.0-4) unstable; urgency=medium . * New Maintainer. Thanks to Boyuan Wang for their work! (Closes: #968620) * debian/control: - Added Rules-Requires-Root field. * debian/copyright: updated to comply with DEP-5. * debian/upstream/metadata: added bug tracking-related fields. * debian/rules: - updated execute_after_dh_auto_clean to test for the Makefile. * debian/patches: created patch to fix the Makefile under doc/man/. Checksums-Sha1: 446b86fc9affdee7113d2cb841a542c76d4efd56 35872 wiki2beamer_0.10.0-4_all.deb 55e4fed4a59421ed4518c68f59503fff0f2a39f9 5524 wiki2beamer_0.10.0-4_armhf.buildinfo Checksums-Sha256: 4e7b3c2da8d82bb75931737d323aebdb0b8a05b5b6fef741572a303859b3d59c 35872 wiki2beamer_0.10.0-4_all.deb c9d6f608db492d7e6482b739abb231a1ceb4ebf3c5c25fa3a4bf9b94fe5e0f85 5524 wiki2beamer_0.10.0-4_armhf.buildinfo Files: 784ae18a4b228f734fbcdfb6df63b92d 35872 text optional wiki2beamer_0.10.0-4_all.deb 11f3f16006328eae7f11b0a1358eb7b5 5524 text optional wiki2beamer_0.10.0-4_armhf.buildinfo Thu Jul 22 13:39:44 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.OTGbjPfQuR/wiki2beamer_0.10.0-4.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.OTGbjPfQuR/wiki2beamer_0.10.0-4.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.OTGbjPfQuR/wiki2beamer_0.10.0-4.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.OTGbjPfQuR/b1/wiki2beamer_0.10.0-4_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.OTGbjPfQuR/b2/wiki2beamer_0.10.0-4_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.283s) 0.283s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.022s) 0.022s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Thu Jul 22 13:39:47 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Thu Jul 22 13:39:47 UTC 2021 I: wiki2beamer from bullseye built successfully and reproducibly on armhf. Thu Jul 22 13:39:48 UTC 2021 I: Submitting .buildinfo files to external archives: Thu Jul 22 13:39:48 UTC 2021 I: Submitting 8.0K b1/wiki2beamer_0.10.0-4_armhf.buildinfo.asc Thu Jul 22 13:39:49 UTC 2021 I: Submitting 8.0K b2/wiki2beamer_0.10.0-4_armhf.buildinfo.asc Thu Jul 22 13:39:49 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Jul 22 13:39:49 UTC 2021 I: Done submitting .buildinfo files. Thu Jul 22 13:39:49 UTC 2021 I: Removing signed wiki2beamer_0.10.0-4_armhf.buildinfo.asc files: removed './b1/wiki2beamer_0.10.0-4_armhf.buildinfo.asc' removed './b2/wiki2beamer_0.10.0-4_armhf.buildinfo.asc'