Fri Jul 30 02:46:45 UTC 2021 I: starting to build libpod-projectdocs-perl/bullseye/armhf on jenkins on '2021-07-30 02:46' Fri Jul 30 02:46:45 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_6/4042/console.log Fri Jul 30 02:46:45 UTC 2021 I: Downloading source for bullseye/libpod-projectdocs-perl=0.53-1 --2021-07-30 02:46:45-- http://cdn-fastly.deb.debian.org/debian/pool/main/libp/libpod-projectdocs-perl/libpod-projectdocs-perl_0.53-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2592 (2.5K) Saving to: ‘libpod-projectdocs-perl_0.53-1.dsc’ 0K .. 100% 232M=0s 2021-07-30 02:46:45 (232 MB/s) - ‘libpod-projectdocs-perl_0.53-1.dsc’ saved [2592/2592] Fri Jul 30 02:46:45 UTC 2021 I: libpod-projectdocs-perl_0.53-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libpod-projectdocs-perl Binary: libpod-projectdocs-perl Architecture: all Version: 0.53-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Pod-ProjectDocs Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libpod-projectdocs-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libpod-projectdocs-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libhtml-parser-perl , libjson-perl , libmoose-perl , libpod-simple-perl , libreadonly-perl , libtemplate-perl , perl Package-List: libpod-projectdocs-perl deb perl optional arch=all Checksums-Sha1: 7c8e18601a6f218a2719b521d9675e572dbad0a7 23497 libpod-projectdocs-perl_0.53.orig.tar.gz 608d1dc5f7bad10f3ce15580b512f6c94964377a 2116 libpod-projectdocs-perl_0.53-1.debian.tar.xz Checksums-Sha256: 37633e311bcb1cdc756e2cd1566d7193218af523640635a8fe714da04f8bbbac 23497 libpod-projectdocs-perl_0.53.orig.tar.gz 7791bcb0d26834bc5e3628fec0532e5d020cb5771a5c40f8b82e1f1c573716c6 2116 libpod-projectdocs-perl_0.53-1.debian.tar.xz Files: 456961beea93816d74975a3c39710a37 23497 libpod-projectdocs-perl_0.53.orig.tar.gz 2ff5d8738ded57f1d489afd910c1f5a7 2116 libpod-projectdocs-perl_0.53-1.debian.tar.xz Dgit: 26a6ee1ed37e1a3b3ade7543eeeb38c4625dd5cc debian archive/debian/0.53-1 https://git.dgit.debian.org/libpod-projectdocs-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmAye+hfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgYIqQ//Ts7TtzmxdUONJZlQHJMubXC2CTaeQjhovTKexrcmskZoHmwlHxU1rwCN bIbZZ93YeuEaBnbN0XfrqbdeFKJ6oAsR++MuofJm+vv8Gtim66wa/J2W1GrrHN1F fxfddZGrOeg5pv0lgHq9H5BCT55/1P3AFo8mIQ7C/eHVzetAre07lPxIHwpE/E1v CsyTZ6ln8uZPc2S9J9lQ4Z/4zIfEYc4eKysK92JyxPHhC7kQqzJkjfLH3yq4lLRL zql0x1Ke3CFZrsE6YUJFHyBsYRsA+7zbLq0XclTIKFKmZG1uT7zLbgcxkfOB/pDx 1dYjhc0+bJ4MuSLV8XGhddRo4TyuQpdBmnv6W7t8/lWcB+L6who7E7CM9O9gNRO/ kPhAkWiJ2n4mV7aRrs5sb8njjf/9IGCo9zcbtlREpigO83BUK+zqSVhSgbbxeyJI OuazJ+O8uDk8iATMUqL525eFYqzKASoBrstHvKuzCpVFiwN0RM0UGLr8sy7KYdz6 12SCm5rSPvciJurNaQUdfjtunxBnZ8tvF3FM9Jqxru7x0XtCGZ2AMZaOO6ORqHPM FHQmdNZqTBdATLMgFa5ZOjlxZ91S/KH/cPMCmzwk2230phKfgpp8rem7auPgoLcm MrWJfULgNcCoF8r1tsdG/mEpGWO6wHPjSLS1TYLBG9zpMhGbDxg= =gIwb -----END PGP SIGNATURE----- Fri Jul 30 02:46:45 UTC 2021 I: Checking whether the package is not for us Fri Jul 30 02:46:45 UTC 2021 I: Starting 1st build on remote node virt64b-armhf-rb.debian.net. Fri Jul 30 02:46:45 UTC 2021 I: Preparing to do remote build '1' on virt64b-armhf-rb.debian.net. Fri Jul 30 02:48:17 UTC 2021 I: Deleting $TMPDIR on virt64b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Jul 29 14:46:52 -12 2021 I: pbuilder-time-stamp: 1627613212 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libpod-projectdocs-perl_0.53-1.dsc] I: copying [./libpod-projectdocs-perl_0.53.orig.tar.gz] I: copying [./libpod-projectdocs-perl_0.53-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.0zudkun7/trustedkeys.kbx': General error gpgv: Signature made Sun Feb 21 03:27:36 2021 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libpod-projectdocs-perl_0.53-1.dsc dpkg-source: info: extracting libpod-projectdocs-perl in libpod-projectdocs-perl-0.53 dpkg-source: info: unpacking libpod-projectdocs-perl_0.53.orig.tar.gz dpkg-source: info: unpacking libpod-projectdocs-perl_0.53-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/11595/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='af5fd50db63142c6a0071474c955d0db' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='11595' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.8F1bLTRFX7/pbuilderrc_NnMX --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.8F1bLTRFX7/b1 --logfile b1/build.log libpod-projectdocs-perl_0.53-1.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux virt64b 5.10.0-8-arm64 #1 SMP Debian 5.10.46-2 (2021-07-20) aarch64 GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Jun 21 14:26 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Feb 7 02:38 more -rwsr-xr-x 1 root root 34400 Feb 7 02:38 mount -rwxr-xr-x 1 root root 9824 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 14:26 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 24 21:25 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Feb 7 02:38 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 21:55 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Feb 7 02:38 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/11595/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libhtml-parser-perl, libjson-perl, libmoose-perl, libpod-simple-perl, libreadonly-perl, libtemplate-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libhtml-parser-perl; however: Package libhtml-parser-perl is not installed. pbuilder-satisfydepends-dummy depends on libjson-perl; however: Package libjson-perl is not installed. pbuilder-satisfydepends-dummy depends on libmoose-perl; however: Package libmoose-perl is not installed. pbuilder-satisfydepends-dummy depends on libreadonly-perl; however: Package libreadonly-perl is not installed. pbuilder-satisfydepends-dummy depends on libtemplate-perl; however: Package libtemplate-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libalgorithm-c3-perl{a} libappconfig-perl{a} libarchive-zip-perl{a} libb-hooks-op-check-perl{a} libclass-c3-perl{a} libclass-load-perl{a} libclass-load-xs-perl{a} libdata-optlist-perl{a} libdebhelper-perl{a} libdevel-callchecker-perl{a} libdevel-globaldestruction-perl{a} libdevel-overloadinfo-perl{a} libdevel-stacktrace-perl{a} libdist-checkconflicts-perl{a} libdynaloader-functions-perl{a} libelf1{a} libeval-closure-perl{a} libfile-stripnondeterminism-perl{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libicu67{a} libjson-perl{a} libmagic-mgc{a} libmagic1{a} libmodule-implementation-perl{a} libmodule-runtime-conflicts-perl{a} libmodule-runtime-perl{a} libmoose-perl{a} libmro-compat-perl{a} libpackage-deprecationmanager-perl{a} libpackage-stash-perl{a} libpackage-stash-xs-perl{a} libparams-classify-perl{a} libparams-util-perl{a} libpipeline1{a} libreadonly-perl{a} libsigsegv2{a} libsub-exporter-perl{a} libsub-exporter-progressive-perl{a} libsub-identify-perl{a} libsub-install-perl{a} libsub-name-perl{a} libsub-override-perl{a} libtemplate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libclass-c3-xs-perl libdevel-lexalias-perl libdevel-partialdump-perl libhttp-message-perl libjson-xs-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 67 newly installed, 0 to remove and 0 not upgraded. Need to get 19.9 MB of archives. After unpacking 69.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-7 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf libalgorithm-c3-perl all 0.11-1 [11.7 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf libappconfig-perl all 1.71-2.1 [67.6 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libb-hooks-op-check-perl armhf 0.22-1+b3 [11.0 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf libclass-c3-perl all 0.35-1 [22.9 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf libparams-util-perl armhf 1.102-1+b1 [24.6 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf libsub-install-perl all 0.928-1.1 [10.8 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf libdata-optlist-perl all 0.110-1.1 [10.8 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf libdynaloader-functions-perl all 0.003-1.1 [12.7 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf libdevel-callchecker-perl armhf 0.008-1+b2 [15.7 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf libparams-classify-perl armhf 0.015-1+b3 [24.5 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf libmodule-runtime-perl all 0.016-1 [19.4 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf libtry-tiny-perl all 0.30-1 [23.3 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf libmodule-implementation-perl all 0.09-1.1 [12.4 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf libpackage-stash-perl all 0.39-1 [21.9 kB] Get: 46 http://deb.debian.org/debian bullseye/main armhf libclass-load-perl all 0.25-1 [16.1 kB] Get: 47 http://deb.debian.org/debian bullseye/main armhf libclass-load-xs-perl armhf 0.10-1+b5 [14.2 kB] Get: 48 http://deb.debian.org/debian bullseye/main armhf libsub-exporter-progressive-perl all 0.001013-1 [7588 B] Get: 49 http://deb.debian.org/debian bullseye/main armhf libdevel-globaldestruction-perl all 0.14-1.1 [8312 B] Get: 50 http://deb.debian.org/debian bullseye/main armhf libmro-compat-perl all 0.13-1 [12.2 kB] Get: 51 http://deb.debian.org/debian bullseye/main armhf libsub-identify-perl armhf 0.14-1+b3 [11.6 kB] Get: 52 http://deb.debian.org/debian bullseye/main armhf libdevel-overloadinfo-perl all 0.005-1 [7212 B] Get: 53 http://deb.debian.org/debian bullseye/main armhf libdevel-stacktrace-perl all 2.0400-1 [28.6 kB] Get: 54 http://deb.debian.org/debian bullseye/main armhf libdist-checkconflicts-perl all 0.11-1.1 [10.2 kB] Get: 55 http://deb.debian.org/debian bullseye/main armhf libsub-exporter-perl all 0.987-1 [47.2 kB] Get: 56 http://deb.debian.org/debian bullseye/main armhf libeval-closure-perl all 0.14-1 [11.5 kB] Get: 57 http://deb.debian.org/debian bullseye/main armhf libhtml-tagset-perl all 3.20-4 [13.0 kB] Get: 58 http://deb.debian.org/debian bullseye/main armhf liburi-perl all 5.08-1 [90.6 kB] Get: 59 http://deb.debian.org/debian bullseye/main armhf libhtml-parser-perl armhf 3.75-1+b1 [102 kB] Get: 60 http://deb.debian.org/debian bullseye/main armhf libjson-perl all 4.03000-1 [88.6 kB] Get: 61 http://deb.debian.org/debian bullseye/main armhf libmodule-runtime-conflicts-perl all 0.003-1.1 [7156 B] Get: 62 http://deb.debian.org/debian bullseye/main armhf libsub-name-perl armhf 0.26-1+b1 [13.2 kB] Get: 63 http://deb.debian.org/debian bullseye/main armhf libpackage-deprecationmanager-perl all 0.17-1.1 [16.6 kB] Get: 64 http://deb.debian.org/debian bullseye/main armhf libpackage-stash-xs-perl armhf 0.29-1+b2 [18.6 kB] Get: 65 http://deb.debian.org/debian bullseye/main armhf libmoose-perl armhf 2.2014-2 [802 kB] Get: 66 http://deb.debian.org/debian bullseye/main armhf libreadonly-perl all 2.050-3 [23.1 kB] Get: 67 http://deb.debian.org/debian bullseye/main armhf libtemplate-perl armhf 2.27-1+b3 [563 kB] Fetched 19.9 MB in 2s (8778 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-7_armhf.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../01-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../03-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../07-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../10-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../23-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../25-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libalgorithm-c3-perl. Preparing to unpack .../31-libalgorithm-c3-perl_0.11-1_all.deb ... Unpacking libalgorithm-c3-perl (0.11-1) ... Selecting previously unselected package libappconfig-perl. Preparing to unpack .../32-libappconfig-perl_1.71-2.1_all.deb ... Unpacking libappconfig-perl (1.71-2.1) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../33-libb-hooks-op-check-perl_0.22-1+b3_armhf.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b3) ... Selecting previously unselected package libclass-c3-perl. Preparing to unpack .../34-libclass-c3-perl_0.35-1_all.deb ... Unpacking libclass-c3-perl (0.35-1) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../35-libparams-util-perl_1.102-1+b1_armhf.deb ... Unpacking libparams-util-perl (1.102-1+b1) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../36-libsub-install-perl_0.928-1.1_all.deb ... Unpacking libsub-install-perl (0.928-1.1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../37-libdata-optlist-perl_0.110-1.1_all.deb ... Unpacking libdata-optlist-perl (0.110-1.1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../38-libdynaloader-functions-perl_0.003-1.1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1.1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../39-libdevel-callchecker-perl_0.008-1+b2_armhf.deb ... Unpacking libdevel-callchecker-perl (0.008-1+b2) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../40-libparams-classify-perl_0.015-1+b3_armhf.deb ... Unpacking libparams-classify-perl (0.015-1+b3) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../41-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../42-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Selecting previously unselected package libmodule-implementation-perl. Preparing to unpack .../43-libmodule-implementation-perl_0.09-1.1_all.deb ... Unpacking libmodule-implementation-perl (0.09-1.1) ... Selecting previously unselected package libpackage-stash-perl. Preparing to unpack .../44-libpackage-stash-perl_0.39-1_all.deb ... Unpacking libpackage-stash-perl (0.39-1) ... Selecting previously unselected package libclass-load-perl. Preparing to unpack .../45-libclass-load-perl_0.25-1_all.deb ... Unpacking libclass-load-perl (0.25-1) ... Selecting previously unselected package libclass-load-xs-perl. Preparing to unpack .../46-libclass-load-xs-perl_0.10-1+b5_armhf.deb ... Unpacking libclass-load-xs-perl (0.10-1+b5) ... Selecting previously unselected package libsub-exporter-progressive-perl. Preparing to unpack .../47-libsub-exporter-progressive-perl_0.001013-1_all.deb ... Unpacking libsub-exporter-progressive-perl (0.001013-1) ... Selecting previously unselected package libdevel-globaldestruction-perl. Preparing to unpack .../48-libdevel-globaldestruction-perl_0.14-1.1_all.deb ... Unpacking libdevel-globaldestruction-perl (0.14-1.1) ... Selecting previously unselected package libmro-compat-perl. Preparing to unpack .../49-libmro-compat-perl_0.13-1_all.deb ... Unpacking libmro-compat-perl (0.13-1) ... Selecting previously unselected package libsub-identify-perl. Preparing to unpack .../50-libsub-identify-perl_0.14-1+b3_armhf.deb ... Unpacking libsub-identify-perl (0.14-1+b3) ... Selecting previously unselected package libdevel-overloadinfo-perl. Preparing to unpack .../51-libdevel-overloadinfo-perl_0.005-1_all.deb ... Unpacking libdevel-overloadinfo-perl (0.005-1) ... Selecting previously unselected package libdevel-stacktrace-perl. Preparing to unpack .../52-libdevel-stacktrace-perl_2.0400-1_all.deb ... Unpacking libdevel-stacktrace-perl (2.0400-1) ... Selecting previously unselected package libdist-checkconflicts-perl. Preparing to unpack .../53-libdist-checkconflicts-perl_0.11-1.1_all.deb ... Unpacking libdist-checkconflicts-perl (0.11-1.1) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../54-libsub-exporter-perl_0.987-1_all.deb ... Unpacking libsub-exporter-perl (0.987-1) ... Selecting previously unselected package libeval-closure-perl. Preparing to unpack .../55-libeval-closure-perl_0.14-1_all.deb ... Unpacking libeval-closure-perl (0.14-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../56-libhtml-tagset-perl_3.20-4_all.deb ... Unpacking libhtml-tagset-perl (3.20-4) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../57-liburi-perl_5.08-1_all.deb ... Unpacking liburi-perl (5.08-1) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../58-libhtml-parser-perl_3.75-1+b1_armhf.deb ... Unpacking libhtml-parser-perl (3.75-1+b1) ... Selecting previously unselected package libjson-perl. Preparing to unpack .../59-libjson-perl_4.03000-1_all.deb ... Unpacking libjson-perl (4.03000-1) ... Selecting previously unselected package libmodule-runtime-conflicts-perl. Preparing to unpack .../60-libmodule-runtime-conflicts-perl_0.003-1.1_all.deb ... Unpacking libmodule-runtime-conflicts-perl (0.003-1.1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../61-libsub-name-perl_0.26-1+b1_armhf.deb ... Unpacking libsub-name-perl (0.26-1+b1) ... Selecting previously unselected package libpackage-deprecationmanager-perl. Preparing to unpack .../62-libpackage-deprecationmanager-perl_0.17-1.1_all.deb ... Unpacking libpackage-deprecationmanager-perl (0.17-1.1) ... Selecting previously unselected package libpackage-stash-xs-perl. Preparing to unpack .../63-libpackage-stash-xs-perl_0.29-1+b2_armhf.deb ... Unpacking libpackage-stash-xs-perl (0.29-1+b2) ... Selecting previously unselected package libmoose-perl. Preparing to unpack .../64-libmoose-perl_2.2014-2_armhf.deb ... Unpacking libmoose-perl (2.2014-2) ... Selecting previously unselected package libreadonly-perl. Preparing to unpack .../65-libreadonly-perl_2.050-3_all.deb ... Unpacking libreadonly-perl (2.050-3) ... Selecting previously unselected package libtemplate-perl. Preparing to unpack .../66-libtemplate-perl_2.27-1+b3_armhf.deb ... Unpacking libtemplate-perl (2.27-1+b3) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libdynaloader-functions-perl (0.003-1.1) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libsub-identify-perl (0.14-1+b3) ... Setting up libhtml-tagset-perl (3.20-4) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up libsub-install-perl (0.928-1.1) ... Setting up libreadonly-perl (2.050-3) ... Setting up libpackage-stash-xs-perl (0.29-1+b2) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libalgorithm-c3-perl (0.11-1) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libb-hooks-op-check-perl (0.22-1+b3) ... Setting up libparams-util-perl (1.102-1+b1) ... Setting up libsub-exporter-progressive-perl (0.001013-1) ... Setting up libsub-name-perl (0.26-1+b1) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libjson-perl (4.03000-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libdevel-globaldestruction-perl (0.14-1.1) ... Setting up libdevel-stacktrace-perl (2.0400-1) ... Setting up libelf1:armhf (0.183-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up liburi-perl (5.08-1) ... Setting up libappconfig-perl (1.71-2.1) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up libclass-c3-perl (0.35-1) ... Setting up libdevel-callchecker-perl (0.008-1+b2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libdata-optlist-perl (0.110-1.1) ... Setting up libtemplate-perl (2.27-1+b3) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up libhtml-parser-perl (3.75-1+b1) ... Setting up libmro-compat-perl (0.13-1) ... Setting up libsub-exporter-perl (0.987-1) ... Setting up libeval-closure-perl (0.14-1) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up libparams-classify-perl (0.015-1+b3) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up libdist-checkconflicts-perl (0.11-1.1) ... Setting up libmodule-implementation-perl (0.09-1.1) ... Setting up libpackage-stash-perl (0.39-1) ... Setting up debhelper (13.3.4) ... Setting up libmodule-runtime-conflicts-perl (0.003-1.1) ... Setting up libclass-load-perl (0.25-1) ... Setting up libpackage-deprecationmanager-perl (0.17-1.1) ... Setting up libdevel-overloadinfo-perl (0.005-1) ... Setting up libclass-load-xs-perl (0.10-1+b5) ... Setting up libmoose-perl (2.2014-2) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libpod-projectdocs-perl-0.53/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libpod-projectdocs-perl_0.53-1_source.changes dpkg-buildpackage: info: source package libpod-projectdocs-perl dpkg-buildpackage: info: source version 0.53-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/libpod-projectdocs-perl-0.53=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/build/libpod-projectdocs-perl-0.53=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Warning: prerequisite Test::Pod 0 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Pod::ProjectDocs Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/libpod-projectdocs-perl-0.53' cp lib/Pod/ProjectDocs/Doc.pm blib/lib/Pod/ProjectDocs/Doc.pm cp lib/Pod/ProjectDocs.pm blib/lib/Pod/ProjectDocs.pm cp lib/Pod/ProjectDocs/Template.pm blib/lib/Pod/ProjectDocs/Template.pm cp lib/Pod/ProjectDocs/Parser/XHTML.pm blib/lib/Pod/ProjectDocs/Parser/XHTML.pm cp lib/Pod/ProjectDocs/Parser.pm blib/lib/Pod/ProjectDocs/Parser.pm cp lib/Pod/ProjectDocs/Config.pm blib/lib/Pod/ProjectDocs/Config.pm cp lib/Pod/ProjectDocs/CSS.pm blib/lib/Pod/ProjectDocs/CSS.pm cp lib/Pod/ProjectDocs/DocManager.pm blib/lib/Pod/ProjectDocs/DocManager.pm cp lib/Pod/ProjectDocs/File.pm blib/lib/Pod/ProjectDocs/File.pm cp lib/Pod/ProjectDocs/IndexPage.pm blib/lib/Pod/ProjectDocs/IndexPage.pm cp bin/pod2projdocs blib/script/pod2projdocs "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2projdocs Manifying 1 pod document Manifying 1 pod document make[1]: Leaving directory '/build/libpod-projectdocs-perl-0.53' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libpod-projectdocs-perl-0.53' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_compile.t ......... 1..1 ok 1 - require Pod::ProjectDocs; ok t/01_project.t ......... 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok t/02_module.t .......... 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok t/03_pod_issue10.t ..... 1..1 ok 1 ok t/author-critic.t ...... skipped: these tests are for testing by the author t/author-pod-syntax.t .. skipped: these tests are for testing by the author All tests successful. Files=6, Tests=23, 6 wallclock secs ( 0.08 usr 0.00 sys + 4.52 cusr 0.32 csys = 4.92 CPU) Result: PASS make[1]: Leaving directory '/build/libpod-projectdocs-perl-0.53' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j3 install DESTDIR=/build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libpod-projectdocs-perl-0.53' Manifying 1 pod document Manifying 1 pod document Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs/Template.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs/CSS.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs/Config.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs/Doc.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs/File.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs/IndexPage.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs/Parser.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs/DocManager.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/perl5/Pod/ProjectDocs/Parser/XHTML.pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/man/man1/pod2projdocs.1p Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/share/man/man3/Pod::ProjectDocs.3pm Installing /build/libpod-projectdocs-perl-0.53/debian/libpod-projectdocs-perl/usr/bin/pod2projdocs make[1]: Leaving directory '/build/libpod-projectdocs-perl-0.53' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libpod-projectdocs-perl' in '../libpod-projectdocs-perl_0.53-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libpod-projectdocs-perl_0.53-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/11595 and its subdirectories I: Current time: Thu Jul 29 14:48:13 -12 2021 I: pbuilder-time-stamp: 1627613293 Fri Jul 30 02:48:19 UTC 2021 I: 1st build successful. Starting 2nd build on remote node virt32b-armhf-rb.debian.net. Fri Jul 30 02:48:19 UTC 2021 I: Preparing to do remote build '2' on virt32b-armhf-rb.debian.net. Fri Jul 30 02:49:35 UTC 2021 I: Deleting $TMPDIR on virt32b-armhf-rb.debian.net. Fri Jul 30 02:49:37 UTC 2021 I: libpod-projectdocs-perl_0.53-1_armhf.changes: Format: 1.8 Date: Sun, 21 Feb 2021 16:25:03 +0100 Source: libpod-projectdocs-perl Binary: libpod-projectdocs-perl Architecture: all Version: 0.53-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libpod-projectdocs-perl - module to generate CPAN like project documents from POD Changes: libpod-projectdocs-perl (0.53-1) unstable; urgency=medium . [ gregor herrmann ] * debian/watch: use uscan version 4. . [ Debian Janitor ] * Bump debhelper from old 10 to 12. * Set debhelper-compat version in Build-Depends. * Set upstream metadata fields: Bug-Submit, Repository-Browse. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). . [ gregor herrmann ] * Import upstream version 0.53. * Update years of upstream and packaging copyright. * Declare compliance with Debian Policy 4.5.1. * Set Rules-Requires-Root: no. * Drop unneeded version constraints and alternatives from (build) dependencies. * Annotate test-only build dependencies with . * Bump debhelper-compat to 13. Checksums-Sha1: 0f403cf246025f4a33373248376911ce232939d0 18632 libpod-projectdocs-perl_0.53-1_all.deb a42408fc35663cc8c000ebf7d49940a558b17f50 5888 libpod-projectdocs-perl_0.53-1_armhf.buildinfo Checksums-Sha256: 9b130224c0f153884a7bfe33657b1cfe49e3c19a6372e8847eb90ac4f1043873 18632 libpod-projectdocs-perl_0.53-1_all.deb 91b0f148e945b74a6b3f9b6f64f563df3c5a1ac3f722ae73950efe117fafae84 5888 libpod-projectdocs-perl_0.53-1_armhf.buildinfo Files: 81949d9eba356a7b4456a1dcfbfd3df0 18632 perl optional libpod-projectdocs-perl_0.53-1_all.deb 9071921c3af5b8169a56552018f40479 5888 perl optional libpod-projectdocs-perl_0.53-1_armhf.buildinfo Fri Jul 30 02:49:39 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.8F1bLTRFX7/libpod-projectdocs-perl_0.53-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.8F1bLTRFX7/libpod-projectdocs-perl_0.53-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.8F1bLTRFX7/libpod-projectdocs-perl_0.53-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.8F1bLTRFX7/b1/libpod-projectdocs-perl_0.53-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.8F1bLTRFX7/b2/libpod-projectdocs-perl_0.53-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.463s) 0.463s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.029s) 0.029s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Fri Jul 30 02:49:42 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Fri Jul 30 02:49:42 UTC 2021 I: libpod-projectdocs-perl from bullseye built successfully and reproducibly on armhf. Fri Jul 30 02:49:44 UTC 2021 I: Submitting .buildinfo files to external archives: Fri Jul 30 02:49:44 UTC 2021 I: Submitting 8.0K b1/libpod-projectdocs-perl_0.53-1_armhf.buildinfo.asc Fri Jul 30 02:49:45 UTC 2021 I: Submitting 8.0K b2/libpod-projectdocs-perl_0.53-1_armhf.buildinfo.asc Fri Jul 30 02:49:46 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Jul 30 02:49:46 UTC 2021 I: Done submitting .buildinfo files. Fri Jul 30 02:49:46 UTC 2021 I: Removing signed libpod-projectdocs-perl_0.53-1_armhf.buildinfo.asc files: removed './b1/libpod-projectdocs-perl_0.53-1_armhf.buildinfo.asc' removed './b2/libpod-projectdocs-perl_0.53-1_armhf.buildinfo.asc'