Fri Sep 24 04:13:41 UTC 2021 I: starting to build libconfig-gitlike-perl/bullseye/armhf on jenkins on '2021-09-24 04:13' Fri Sep 24 04:13:41 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_15/11547/console.log Fri Sep 24 04:13:41 UTC 2021 I: Downloading source for bullseye/libconfig-gitlike-perl=1.18-1 --2021-09-24 04:13:41-- http://cdn-fastly.deb.debian.org/debian/pool/main/libc/libconfig-gitlike-perl/libconfig-gitlike-perl_1.18-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2507 (2.4K) Saving to: ‘libconfig-gitlike-perl_1.18-1.dsc’ 0K .. 100% 265M=0s 2021-09-24 04:13:41 (265 MB/s) - ‘libconfig-gitlike-perl_1.18-1.dsc’ saved [2507/2507] Fri Sep 24 04:13:41 UTC 2021 I: libconfig-gitlike-perl_1.18-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libconfig-gitlike-perl Binary: libconfig-gitlike-perl Architecture: all Version: 1.18-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Config-GitLike Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libconfig-gitlike-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libconfig-gitlike-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 12) Build-Depends-Indep: libmoo-perl , libmoox-types-mooselike-perl , libtest-exception-perl , perl Package-List: libconfig-gitlike-perl deb perl optional arch=all Checksums-Sha1: 47f0b748e08676354c6f2984c7b69cb9920e2a98 52692 libconfig-gitlike-perl_1.18.orig.tar.gz a09eb15dd25fa6de10ddeea4b9695a35f4c4265b 3224 libconfig-gitlike-perl_1.18-1.debian.tar.xz Checksums-Sha256: f7ae7440f3adab5b9ff9aa57216d84fd4a681009b9584e32da42f8bb71e332c5 52692 libconfig-gitlike-perl_1.18.orig.tar.gz 13f9ffa950db0013581bc1c141bf9d93a88d52269253d208c5f560f2083fd36c 3224 libconfig-gitlike-perl_1.18-1.debian.tar.xz Files: ec671c951dbff274fa6188ea97438676 52692 libconfig-gitlike-perl_1.18.orig.tar.gz 3f1a9099f8ccd38255523a7a08d76eb7 3224 libconfig-gitlike-perl_1.18-1.debian.tar.xz Dgit: fd1a4df0ce181175a340367cefd592892561145b debian archive/debian/1.18-1 https://git.dgit.debian.org/libconfig-gitlike-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAl5uSmtfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgaEig/6AynLhI3N+CMS3QmW3LH0LGC8ji38Ndjn/wc1+3Q5gTGyhgAHw8vPuDai nxbCYUHfKs63BZdDYiYIENq2Jy1fykgIC1lvtrsUT891g0QEh/u0BGHuzSZYoS01 by6tL2wmuogqyaxspj5sT0d37awrtoLyeeLPvfkpFd/v49uNPHaMvXgFj/PPhMcr 2jyehBBDtzNqBP1xF0UsNWkFgZyR+6/+rWCxfiFr/v2p/ss0XcjDIfCWGRlCLs2q 9bbrjleJ3rGDeQ26IZ9q/zyOACoXRsGslpI205jD+0hwArpbAYrmOsEHCnnOjVtN L+zkf0Fi9Mqb87z2e7QmopDAVDelS2K04P6nD96tXab/UbhWmVP6cdUOgZbFBqAl OkCew7Ixci+skWxrYNQhTRX0bWJ0kpYS1nl3JuewStSXD+8/l0c7eo6T7LN5NaKW zUVT7sGq4fUDhS3/VJNUnoa9zQX2/gJgpuPxaMU912Dd/13Z9DooQbiGAIP3x9Oc sU341Iz/Ku15zWHiTeyEs5LcSITYJBzlfcf6RMEY8kIldGcHWyss6eXR37GaHfQx VW+uvY5PS4rheIGI6LPQd3IK8SkiWRJ8E0Jf3lC0DBus5O/INJ56Vfj0z+WrZFRp 4AG3W+E4jwQy5/d4t7A4BR/8Zn71d3hSk/LpNttX5q8mpGhzBEk= =/hvh -----END PGP SIGNATURE----- Fri Sep 24 04:13:41 UTC 2021 I: Checking whether the package is not for us Fri Sep 24 04:13:41 UTC 2021 I: Starting 1st build on remote node virt64b-armhf-rb.debian.net. Fri Sep 24 04:13:41 UTC 2021 I: Preparing to do remote build '1' on virt64b-armhf-rb.debian.net. Fri Sep 24 04:14:39 UTC 2021 I: Deleting $TMPDIR on virt64b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Sep 23 16:13:48 -12 2021 I: pbuilder-time-stamp: 1632456828 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libconfig-gitlike-perl_1.18-1.dsc] I: copying [./libconfig-gitlike-perl_1.18.orig.tar.gz] I: copying [./libconfig-gitlike-perl_1.18-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.9f6DLSnV/trustedkeys.kbx': General error gpgv: Signature made Sun Mar 15 03:31:55 2020 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libconfig-gitlike-perl_1.18-1.dsc dpkg-source: info: extracting libconfig-gitlike-perl in libconfig-gitlike-perl-1.18 dpkg-source: info: unpacking libconfig-gitlike-perl_1.18.orig.tar.gz dpkg-source: info: unpacking libconfig-gitlike-perl_1.18-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/10171/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='ef3406273a2b4311a02b60a68f471649' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='10171' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.V4rfg4ZLk6/pbuilderrc_xpB1 --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.V4rfg4ZLk6/b1 --logfile b1/build.log libconfig-gitlike-perl_1.18-1.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux virt64b 5.10.0-8-arm64 #1 SMP Debian 5.10.46-4 (2021-08-03) aarch64 GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Aug 4 08:25 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Jul 28 07:09 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Jul 28 07:09 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 2021 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Jul 28 07:09 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Jul 28 07:09 more -rwsr-xr-x 1 root root 34400 Jul 28 07:09 mount -rwxr-xr-x 1 root root 9824 Jul 28 07:09 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 08:25 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Sep 20 21:24 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Jul 28 07:09 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 2021 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 22108 Jul 28 07:09 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Jul 28 07:09 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/10171/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), libmoo-perl, libmoox-types-mooselike-perl, libtest-exception-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmoo-perl; however: Package libmoo-perl is not installed. pbuilder-satisfydepends-dummy depends on libmoox-types-mooselike-perl; however: Package libmoox-types-mooselike-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-exception-perl; however: Package libtest-exception-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libb-hooks-op-check-perl{a} libclass-method-modifiers-perl{a} libdebhelper-perl{a} libdevel-callchecker-perl{a} libdynaloader-functions-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libimport-into-perl{a} libmagic-mgc{a} libmagic1{a} libmodule-runtime-perl{a} libmoo-perl{a} libmoox-types-mooselike-perl{a} libparams-classify-perl{a} libpipeline1{a} librole-tiny-perl{a} libsigsegv2{a} libstrictures-perl{a} libsub-override-perl{a} libsub-quote-perl{a} libsub-uplevel-perl{a} libtest-exception-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libclass-xsaccessor-perl libltdl-dev libmail-sendmail-perl libnamespace-clean-perl libsub-name-perl lynx wget 0 packages upgraded, 45 newly installed, 0 to remove and 0 not upgraded. Need to get 18.0 MB of archives. After unpacking 63.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-8 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf libb-hooks-op-check-perl armhf 0.22-1+b3 [11.0 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf libclass-method-modifiers-perl all 2.13-1 [19.2 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libdynaloader-functions-perl all 0.003-1.1 [12.7 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf libdevel-callchecker-perl armhf 0.008-1+b2 [15.7 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf libparams-classify-perl armhf 0.015-1+b3 [24.5 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf libmodule-runtime-perl all 0.016-1 [19.4 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf libimport-into-perl all 1.002005-1 [11.6 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf librole-tiny-perl all 2.002004-1 [21.4 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf libstrictures-perl all 2.000006-1 [18.6 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf libsub-quote-perl all 2.006006-1 [21.0 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf libmoo-perl all 2.004004-1 [59.9 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf libmoox-types-mooselike-perl all 0.29-1.1 [18.1 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf libsub-uplevel-perl all 0.2800-1.1 [16.5 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf libtest-exception-perl all 0.43-1 [18.7 kB] Fetched 18.0 MB in 2s (8785 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_armhf.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../01-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../03-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../07-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../10-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../23-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../25-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../31-libb-hooks-op-check-perl_0.22-1+b3_armhf.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b3) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../32-libclass-method-modifiers-perl_2.13-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.13-1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../33-libdynaloader-functions-perl_0.003-1.1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1.1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../34-libdevel-callchecker-perl_0.008-1+b2_armhf.deb ... Unpacking libdevel-callchecker-perl (0.008-1+b2) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../35-libparams-classify-perl_0.015-1+b3_armhf.deb ... Unpacking libparams-classify-perl (0.015-1+b3) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../36-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../37-libimport-into-perl_1.002005-1_all.deb ... Unpacking libimport-into-perl (1.002005-1) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../38-librole-tiny-perl_2.002004-1_all.deb ... Unpacking librole-tiny-perl (2.002004-1) ... Selecting previously unselected package libstrictures-perl. Preparing to unpack .../39-libstrictures-perl_2.000006-1_all.deb ... Unpacking libstrictures-perl (2.000006-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../40-libsub-quote-perl_2.006006-1_all.deb ... Unpacking libsub-quote-perl (2.006006-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../41-libmoo-perl_2.004004-1_all.deb ... Unpacking libmoo-perl (2.004004-1) ... Selecting previously unselected package libmoox-types-mooselike-perl. Preparing to unpack .../42-libmoox-types-mooselike-perl_0.29-1.1_all.deb ... Unpacking libmoox-types-mooselike-perl (0.29-1.1) ... Selecting previously unselected package libsub-uplevel-perl. Preparing to unpack .../43-libsub-uplevel-perl_0.2800-1.1_all.deb ... Unpacking libsub-uplevel-perl (0.2800-1.1) ... Selecting previously unselected package libtest-exception-perl. Preparing to unpack .../44-libtest-exception-perl_0.43-1_all.deb ... Unpacking libtest-exception-perl (0.43-1) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libdynaloader-functions-perl (0.003-1.1) ... Setting up libclass-method-modifiers-perl (2.13-1) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libb-hooks-op-check-perl (0.22-1+b3) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up librole-tiny-perl (2.002004-1) ... Setting up libsub-uplevel-perl (0.2800-1.1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libstrictures-perl (2.000006-1) ... Setting up libsub-quote-perl (2.006006-1) ... Setting up libelf1:armhf (0.183-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up libdevel-callchecker-perl (0.008-1+b2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libtest-exception-perl (0.43-1) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up libparams-classify-perl (0.015-1+b3) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up libimport-into-perl (1.002005-1) ... Setting up libmoo-perl (2.004004-1) ... Setting up debhelper (13.3.4) ... Setting up libmoox-types-mooselike-perl (0.29-1.1) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libconfig-gitlike-perl-1.18/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libconfig-gitlike-perl_1.18-1_source.changes dpkg-buildpackage: info: source package libconfig-gitlike-perl dpkg-buildpackage: info: source version 1.18-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/libconfig-gitlike-perl-1.18=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/build/libconfig-gitlike-perl-1.18=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Config::GitLike Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/libconfig-gitlike-perl-1.18' cp lib/Config/GitLike/Cascaded.pm blib/lib/Config/GitLike/Cascaded.pm cp lib/Config/GitLike/Git.pm blib/lib/Config/GitLike/Git.pm cp lib/Config/GitLike.pm blib/lib/Config/GitLike.pm Manifying 3 pod documents make[1]: Leaving directory '/build/libconfig-gitlike-perl-1.18' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libconfig-gitlike-perl-1.18' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/00_use.t ...................... 1..2 ok 1 - use Config::GitLike; ok 2 - use Config::GitLike::Cascaded; ok # config file is: /tmp/dA8THAwyhZ/config t/casing.t ...................... ok 1 - mixed-case key is preserved when written ok 2 - Can be referenced with original case ok 3 - Can be referenced with lower case ok 4 - Can be referenced with different case ok 5 - Find original case when asked in original case ok 6 - Find original case when asked in lower case ok 7 - Find original case when asked in different case ok 8 - Should get an error when no section passed to get(). ok 9 - The missing section error should be correct ok 10 - ->set without ->load does not alter value in ->get ok 11 - Found definition from second file ok 12 - Loaded value from second file ok 13 - Find new case in second file ok 14 - multiple respects any case ok 15 - mixed-case key is preserved when written as multiple ok 16 - Got original value ok 17 - Got original case ok 18 - Loaded second file ok 19 - Is marked as multiple ok 20 - Got all three new values ok 21 - Got all three new casings 1..21 ok # config file is: /tmp/BkCgWb1NhD/config t/comment.t ..................... ok 1 - comment ok 2 - comment with ws ok 3 - indented comment with newlines and config ok 4 - comment with semicolon 1..4 ok # config file is: /tmp/SHH6gooJMO/config t/encoding.t .................... ok 1 - Value with UTF-8 ok 2 - Get value with UTF-8 1..2 ok # config file is: /tmp/gWITgstXHZ/config t/get_regexp_filter_multiple.t .. 1..30 ok 1 - get all values for key delicieux ok 2 - get all values for key delicieux, filter by regexp ok 3 - get all values for key delicieux, filter by regexp "false" ok 4 - get all values for key delicieux by regexp ok 5 - get all values for key delicieux by regexp, filter by true ok 6 - get all values for key delicieux by regexp, filter by !true ok 7 - get all values for key delicieux by regexp, filter by false ok 8 - get all values for key delicieux by regexp, filter by !false ok 9 - get all values for key b ok 10 - get all values for key b, filter by letter "o" ok 11 - get all values for key b, filter by letter "n" ok 12 - get all values for key b, filter by letter "Q" ok 13 - get all values for key b by regexp ok 14 - get all values for key b by regexp, filter by empty regex ok 15 - get all values for key b by regexp, filter by catch-all regex ok 16 - get all values for key b by regexp, filter by anchored catch-all regex ok 17 - get all values for key b by regexp, filter by regex on|off ok 18 - get all values for key b by regexp, filter by anchored regex on|off ok 19 - get all values for key b by regexp, filter by letter "o" ok 20 - get all values for key b by regexp, filter by letter "n" ok 21 - get all values for key b by regexp, filter by letter "Q" ok 22 - get all values for key b by regexp, filter by word "ARRAY" ok 23 - get all values for key b by regexp, filter by negated regex ok 24 - get all values for key b by regexp, filter by negated catch-all regex ok 25 - get all values for key b by regexp, filter by "!(on|off)" ok 26 - get all values for key b by regexp, filter by "!on|off" ok 27 - get all values for key b by regexp, filter by negated regex good|bad ok 28 - get all values for key b by regexp, filter by "!o" ok 29 - get all values for key b by regexp, filter by "!n" ok 30 - get all values for key b by regexp, filter by "!ARRAY" ok t/platforms.t ................... ok 1 - Load unix config ok 2 - Should have proper config for unix file ok 3 - Load dos config ok 4 - Should have proper config for dos file ok 5 - Load mac config ok 6 - Should have proper config for mac file 1..6 ok # config file is: /tmp/jaAagAUp2C/config # Test git config in different settings t/t1300-repo-config.t ........... 1..142 ok 1 - initial ok 2 - mixed case ok 3 - similar section ok 4 - similar section ok 5 - replace with non-match ok 6 - replace with non-match ok 7 - non-match result ok 8 - unset with cont. lines ok 9 - unset with cont. lines is correct ok 10 - multiple unset is correct ok 11 - replace all ok 12 - all replaced ok 13 - really mean test ok 14 - really really mean test ok 15 - get value ok 16 - unset ok 17 - multivar ok 18 - non-match ok 19 - non-match value ok 20 - ambiguous get ok 21 - get multivar ok 22 - multivar replace only the first match ok 23 - ambiguous unset ok 24 - invalid unset ok 25 - multivar unset doesn't crash ok 26 - multivar unset ok 27 - invalid name containing = char ok 28 - invalid name starting with whitespace ok 29 - invalid name ending with whitespace ok 30 - invalid name containing newline ok 31 - can have . char in key if quoted ok 32 - URL key value is correct ok 33 - remove URL key section ok 34 - correct key ok 35 - correct key ok 36 - hierarchical section value ok 37 - working dump ok 38 - dump works in array context ok 39 - --get-regexp ok 40 - --add ok 41 - get variable with no value ok 42 - get variable with empty value ok 43 - get_regexp variable with no value ok 44 - get_regexp variable with empty value ok 45 - get bool variable with no value ok 46 - get bool variable with empty value ok 47 - new section is partial match of another ok 48 - new variable inserts into proper section ok 49 - rename_section lives ok 50 - rename succeeded ok 51 - rename non-existing section ok 52 - rename non-existing section changes nothing ok 53 - rename another section ok 54 - rename succeeded ok 55 - remove section ok 56 - section was removed properly ok 57 - section ending ok 58 - numbers: int k interp ok 59 - numbers: int m interp ok 60 - invalid unit ok 61 - correct true bool from get ok 62 - correct false bool from get ok 63 - correct true bool from get ok 64 - correct false bool from get ok 65 - correct true bool from get ok 66 - correct false bool from get ok 67 - correct true bool from get ok 68 - correct false bool from get ok 69 - invalid bool (get) ok 70 - invalid bool (set) ok 71 - correct true bool from set ok 72 - correct false bool from set ok 73 - correct true bool from set ok 74 - correct false bool from set ok 75 - correct true bool from set ok 76 - correct false bool from set ok 77 - correct true bool from set ok 78 - correct false bool from set ok 79 - set --int ok 80 - get bool-or-int ok 81 - get bool-or-int ok 82 - get bool-or-int ok 83 - get bool-or-int ok 84 - get bool-or-int ok 85 - get bool-or-int ok 86 - get bool-or-int ok 87 - set bool-or-int ok 88 - quoting ok 89 - key with newline ok 90 - value with newline ok 91 - value continued on next line ok 92 - can get 1st val from symlink ok 93 - can get 2nd val from symlink ok 94 - section headers are valid w/out newline ok 95 - get_regexp casting works ok 96 - get_regexp filter works ok 97 - get_all filter works ok 98 - get_all casting works ok 99 - don't strip quotes contained in value ok 100 - int casting truncates ok 101 - num casting doesn't truncate ok 102 - repo config overrides user config ok 103 - user config is loaded ok 104 - global config is loaded and user/repo configs override it ok 105 - basic group_set ok 106 - basic group_set ok 107 - subsection comparison is case-sensitive ok 108 - parse weird characters in section in non-git compat mode ok 109 - set weird characters in section in non-git compat mode ok 110 - variable names cannot contain . in git-compat mode ok 111 - variable names cannot contain symbols in git-compat mode ok 112 - variable names cannot start with a number git-compat mode ok 113 - variable names cannot start with a dash git-compat mode ok 114 - variable names cannot start with a number in git-compat mode ok 115 - variable names cannot contain symbols in git-compat mode ok 116 - variable names cannot contain . in git-compat mode ok 117 - variable names cannot start with - in git-compat mode ok 118 - section names cannot contain symbols in git-compat mode ok 119 - section names cannot contain whitespace in git-compat mode ok 120 - section names can contain - and . in git-compat mode ok 121 - section names cannot contain whitespace in git-compat mode ok 122 - section names cannot contain symbols in git-compat mode ok 123 - section names can contain - and . while setting in git-compat mode ok 124 - subsection names cannot contain unescaped newlines in compat mode ok 125 - subsection names cannot contain unescaped newlines in nocompat mode ok 126 - invalid section (nocompat) ok 127 - invalid section (compat) ok 128 - key cannot contain [] in compat mode ok 129 - key can contain but not start with [ in nocompat mode ok 130 - subsection with escaped backslashes ok 131 - value with doublequote occurs 1 time ok 132 - value with doublequote occurs 2 times ok 133 - value with doublequote occurs 3 times ok 134 - value with backslash occurs 1 time ok 135 - value with backslash occurs 2 times ok 136 - value with backslash occurs 3 times ok 137 - subsection with doublequote occurs with 1 time ok 138 - subsection with doublequote occurs with 2 times ok 139 - subsection with doublequote occurs with 3 times ok 140 - subsection with backslash occurs with 1 time ok 141 - subsection with backslash occurs with 2 times ok 142 - subsection with backslash occurs with 3 times ok All tests successful. Files=7, Tests=207, 4 wallclock secs ( 0.14 usr 0.02 sys + 2.58 cusr 0.74 csys = 3.48 CPU) Result: PASS make[1]: Leaving directory '/build/libconfig-gitlike-perl-1.18' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j3 install DESTDIR=/build/libconfig-gitlike-perl-1.18/debian/libconfig-gitlike-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libconfig-gitlike-perl-1.18' Manifying 3 pod documents Installing /build/libconfig-gitlike-perl-1.18/debian/libconfig-gitlike-perl/usr/share/perl5/Config/GitLike.pm Installing /build/libconfig-gitlike-perl-1.18/debian/libconfig-gitlike-perl/usr/share/perl5/Config/GitLike/Git.pm Installing /build/libconfig-gitlike-perl-1.18/debian/libconfig-gitlike-perl/usr/share/perl5/Config/GitLike/Cascaded.pm Installing /build/libconfig-gitlike-perl-1.18/debian/libconfig-gitlike-perl/usr/share/man/man3/Config::GitLike.3pm Installing /build/libconfig-gitlike-perl-1.18/debian/libconfig-gitlike-perl/usr/share/man/man3/Config::GitLike::Cascaded.3pm Installing /build/libconfig-gitlike-perl-1.18/debian/libconfig-gitlike-perl/usr/share/man/man3/Config::GitLike::Git.3pm make[1]: Leaving directory '/build/libconfig-gitlike-perl-1.18' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libconfig-gitlike-perl' in '../libconfig-gitlike-perl_1.18-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libconfig-gitlike-perl_1.18-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/10171 and its subdirectories I: Current time: Thu Sep 23 16:14:34 -12 2021 I: pbuilder-time-stamp: 1632456874 Fri Sep 24 04:14:41 UTC 2021 I: 1st build successful. Starting 2nd build on remote node virt32b-armhf-rb.debian.net. Fri Sep 24 04:14:41 UTC 2021 I: Preparing to do remote build '2' on virt32b-armhf-rb.debian.net. Fri Sep 24 04:15:47 UTC 2021 I: Deleting $TMPDIR on virt32b-armhf-rb.debian.net. Fri Sep 24 04:15:50 UTC 2021 I: libconfig-gitlike-perl_1.18-1_armhf.changes: Format: 1.8 Date: Sun, 15 Mar 2020 16:28:40 +0100 Source: libconfig-gitlike-perl Binary: libconfig-gitlike-perl Architecture: all Version: 1.18-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libconfig-gitlike-perl - Perl module for Git-compatible config file parsing Changes: libconfig-gitlike-perl (1.18-1) unstable; urgency=medium . [ Damyan Ivanov ] * declare conformance with Policy 4.1.3 (no changes needed) . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ gregor herrmann ] * debian/watch: use uscan version 4. * Import upstream version 1.18. * Update years of packaging copyright. * Declare compliance with Debian Policy 4.5.0. * Set Rules-Requires-Root: no. * Annotate test-only build dependencies with . * Bump debhelper-compat to 12. * Set upstream metadata fields: Repository, Repository-Browse. * Remove obsolete fields Contact, Name from debian/upstream/metadata. Checksums-Sha1: c68c97e08674724203692333c89837d6496d4154 36780 libconfig-gitlike-perl_1.18-1_all.deb 10cee20aaa119b47fd12b4c4afde5f2a733a4d3f 5080 libconfig-gitlike-perl_1.18-1_armhf.buildinfo Checksums-Sha256: bd841cbfd691a8a29ddca29b002a9fd960d09c55abeff457d29aa8b344ec2be3 36780 libconfig-gitlike-perl_1.18-1_all.deb ada7051394749d90671feae5c8331de9cc358a7cdd031bf78ba3b330ef5b34c9 5080 libconfig-gitlike-perl_1.18-1_armhf.buildinfo Files: c9060e932a30bc6d9f55fe69173e8c21 36780 perl optional libconfig-gitlike-perl_1.18-1_all.deb 4de3d2bbde43729618f3c1b31205c499 5080 perl optional libconfig-gitlike-perl_1.18-1_armhf.buildinfo Fri Sep 24 04:15:51 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.V4rfg4ZLk6/libconfig-gitlike-perl_1.18-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.V4rfg4ZLk6/libconfig-gitlike-perl_1.18-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.V4rfg4ZLk6/libconfig-gitlike-perl_1.18-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.V4rfg4ZLk6/b1/libconfig-gitlike-perl_1.18-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.V4rfg4ZLk6/b2/libconfig-gitlike-perl_1.18-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.440s) 0.440s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.041s) 0.040s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Fri Sep 24 04:15:53 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Fri Sep 24 04:15:53 UTC 2021 I: libconfig-gitlike-perl from bullseye built successfully and reproducibly on armhf. Fri Sep 24 04:15:54 UTC 2021 I: Submitting .buildinfo files to external archives: Fri Sep 24 04:15:54 UTC 2021 I: Submitting 8.0K b1/libconfig-gitlike-perl_1.18-1_armhf.buildinfo.asc Fri Sep 24 04:15:55 UTC 2021 I: Submitting 8.0K b2/libconfig-gitlike-perl_1.18-1_armhf.buildinfo.asc Fri Sep 24 04:15:56 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Sep 24 04:15:56 UTC 2021 I: Done submitting .buildinfo files. Fri Sep 24 04:15:56 UTC 2021 I: Removing signed libconfig-gitlike-perl_1.18-1_armhf.buildinfo.asc files: removed './b1/libconfig-gitlike-perl_1.18-1_armhf.buildinfo.asc' removed './b2/libconfig-gitlike-perl_1.18-1_armhf.buildinfo.asc'