Mon Jul 19 02:36:33 UTC 2021 I: starting to build hdmi2usb-fx2-firmware/bullseye/armhf on jenkins on '2021-07-19 02:36' Mon Jul 19 02:36:33 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_8/9779/console.log Mon Jul 19 02:36:33 UTC 2021 I: Downloading source for bullseye/hdmi2usb-fx2-firmware=0.0.0~git20151225-3 --2021-07-19 02:36:34-- http://cdn-fastly.deb.debian.org/debian/pool/main/h/hdmi2usb-fx2-firmware/hdmi2usb-fx2-firmware_0.0.0~git20151225-3.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1537 (1.5K) Saving to: ‘hdmi2usb-fx2-firmware_0.0.0~git20151225-3.dsc’ 0K . 100% 202M=0s 2021-07-19 02:36:34 (202 MB/s) - ‘hdmi2usb-fx2-firmware_0.0.0~git20151225-3.dsc’ saved [1537/1537] Mon Jul 19 02:36:34 UTC 2021 I: hdmi2usb-fx2-firmware_0.0.0~git20151225-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: hdmi2usb-fx2-firmware Binary: hdmi2usb-fx2-firmware Architecture: all Version: 0.0.0~git20151225-3 Maintainer: Stefano Rivera Homepage: https://github.com/mithro/fx2lib/tree/cdc-usb-serialno-from-eeprom Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/debian/hdmi2usb-fx2-firmware Vcs-Git: https://salsa.debian.org/debian/hdmi2usb-fx2-firmware.git Build-Depends: debhelper-compat (= 12), dh-exec, libusb-1.0-0-dev, sdcc Package-List: hdmi2usb-fx2-firmware deb video optional arch=all Checksums-Sha1: 58448d5d644ae7cfbcf08ea52bc15d7ee313db52 78576 hdmi2usb-fx2-firmware_0.0.0~git20151225.orig.tar.xz 18f3230b9f750d038aeb3b1c2aea408c25fc002d 3224 hdmi2usb-fx2-firmware_0.0.0~git20151225-3.debian.tar.xz Checksums-Sha256: ab16c8a65b5e1f2d827aa5524e850bedecb8e335761c2f90d3c6fb30dd935d85 78576 hdmi2usb-fx2-firmware_0.0.0~git20151225.orig.tar.xz 36bad9c48118ce7f43001e221bfe7c2725c5dab0ab85df1a7f47588cdc78c7d4 3224 hdmi2usb-fx2-firmware_0.0.0~git20151225-3.debian.tar.xz Files: e7442e646a1d36f7023f35bb78c70912 78576 hdmi2usb-fx2-firmware_0.0.0~git20151225.orig.tar.xz fd70b5d2a4d5d94510afb58c8976a859 3224 hdmi2usb-fx2-firmware_0.0.0~git20151225-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iIoEARYKADIWIQTumtb5BSD6EfafSCRHew2wJjpU2AUCXvfWbRQcc3RlZmFub3JA ZGViaWFuLm9yZwAKCRBHew2wJjpU2FzqAQCdHNEIeg2IBDU6IE++H+KKUTp8rZLr CeqBpbdOLFWl9wD/UuH9cZlG3gkjw6ilfiyYYQW2eccvOQlQeTv/Us9e/AM= =pGU3 -----END PGP SIGNATURE----- Mon Jul 19 02:36:34 UTC 2021 I: Checking whether the package is not for us Mon Jul 19 02:36:34 UTC 2021 I: Starting 1st build on remote node virt64a-armhf-rb.debian.net. Mon Jul 19 02:36:34 UTC 2021 I: Preparing to do remote build '1' on virt64a-armhf-rb.debian.net. Mon Jul 19 02:38:09 UTC 2021 I: Deleting $TMPDIR on virt64a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Jul 18 14:36:40 -12 2021 I: pbuilder-time-stamp: 1626662200 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [hdmi2usb-fx2-firmware_0.0.0~git20151225-3.dsc] I: copying [./hdmi2usb-fx2-firmware_0.0.0~git20151225.orig.tar.xz] I: copying [./hdmi2usb-fx2-firmware_0.0.0~git20151225-3.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.sjlbPK0O/trustedkeys.kbx': General error gpgv: Signature made Sat Jun 27 11:29:49 2020 -12 gpgv: using EDDSA key EE9AD6F90520FA11F69F4824477B0DB0263A54D8 gpgv: issuer "stefanor@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./hdmi2usb-fx2-firmware_0.0.0~git20151225-3.dsc dpkg-source: info: extracting hdmi2usb-fx2-firmware in hdmi2usb-fx2-firmware-0.0.0~git20151225 dpkg-source: info: unpacking hdmi2usb-fx2-firmware_0.0.0~git20151225.orig.tar.xz dpkg-source: info: unpacking hdmi2usb-fx2-firmware_0.0.0~git20151225-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying putchar-prototype dpkg-source: info: applying sdcc-3.9 I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/30330/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='8163b2b02312476c8a5c0d41c3e24c21' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='30330' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.fJ6umVb9ZQ/pbuilderrc_1KH6 --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.fJ6umVb9ZQ/b1 --logfile b1/build.log hdmi2usb-fx2-firmware_0.0.0~git20151225-3.dsc' SUDO_GID='114' SUDO_UID='108' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux virt64a 5.10.0-7-arm64 #1 SMP Debian 5.10.40-1 (2021-05-28) aarch64 GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Jun 21 14:26 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Feb 7 02:38 more -rwsr-xr-x 1 root root 34400 Feb 7 02:38 mount -rwxr-xr-x 1 root root 9824 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 14:26 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 16 21:27 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Feb 7 02:38 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 21:55 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Feb 7 02:38 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/30330/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), dh-exec, libusb-1.0-0-dev, sdcc dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-exec; however: Package dh-exec is not installed. pbuilder-satisfydepends-dummy depends on libusb-1.0-0-dev; however: Package libusb-1.0-0-dev is not installed. pbuilder-satisfydepends-dummy depends on sdcc; however: Package sdcc is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-exec{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libusb-1.0-0{a} libusb-1.0-0-dev{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sdcc{a} sdcc-libraries{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl gputils libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libusb-1.0-doc lynx sdcc-doc wget 0 packages upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 21.1 MB of archives. After unpacking 87.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-7 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf dh-exec armhf 0.23.2 [25.1 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf libusb-1.0-0 armhf 2:1.0.24-3 [54.6 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libusb-1.0-0-dev armhf 2:1.0.24-3 [76.5 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf sdcc-libraries all 4.0.0+dfsg-2 [1469 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf sdcc armhf 4.0.0+dfsg-2 [1810 kB] Fetched 21.1 MB in 3s (7562 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-7_armhf.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../01-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../03-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../07-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../10-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../23-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../25-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package dh-exec. Preparing to unpack .../31-dh-exec_0.23.2_armhf.deb ... Unpacking dh-exec (0.23.2) ... Selecting previously unselected package libusb-1.0-0:armhf. Preparing to unpack .../32-libusb-1.0-0_2%3a1.0.24-3_armhf.deb ... Unpacking libusb-1.0-0:armhf (2:1.0.24-3) ... Selecting previously unselected package libusb-1.0-0-dev:armhf. Preparing to unpack .../33-libusb-1.0-0-dev_2%3a1.0.24-3_armhf.deb ... Unpacking libusb-1.0-0-dev:armhf (2:1.0.24-3) ... Selecting previously unselected package sdcc-libraries. Preparing to unpack .../34-sdcc-libraries_4.0.0+dfsg-2_all.deb ... Unpacking sdcc-libraries (4.0.0+dfsg-2) ... Selecting previously unselected package sdcc. Preparing to unpack .../35-sdcc_4.0.0+dfsg-2_armhf.deb ... Unpacking sdcc (4.0.0+dfsg-2) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sdcc-libraries (4.0.0+dfsg-2) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libusb-1.0-0:armhf (2:1.0.24-3) ... Setting up libelf1:armhf (0.183-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libusb-1.0-0-dev:armhf (2:1.0.24-3) ... Setting up m4 (1.4.18-5) ... Setting up sdcc (4.0.0+dfsg-2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Setting up dh-exec (0.23.2) ... Processing triggers for libc-bin (2.31-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/hdmi2usb-fx2-firmware-0.0.0~git20151225/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../hdmi2usb-fx2-firmware_0.0.0~git20151225-3_source.changes dpkg-buildpackage: info: source package hdmi2usb-fx2-firmware dpkg-buildpackage: info: source version 0.0.0~git20151225-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Stefano Rivera dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_auto_clean make -j3 clean make[1]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225' make -C lib clean make[2]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225' make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. rm -f *.{asm,ihx,lnk,lst,map,mem,rel,rst,sym,adb,cdb,lib} rm -f interrupts/*.{asm,ihx,lnk,lst,map,mem,rel,rst,sym,adb,dcb,lib} make[2]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/lib' make -C examples clean make[2]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225' make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. make -C bulkloop clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/bulkloop' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/bulkloop' make -C cdc clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc' make -C loopback clean make[4]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc/loopback' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[4]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc/loopback' make -C to-uart clean make[4]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc/to-uart' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[4]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc/to-uart' make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc' make -C debugdevice clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/debugdevice' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/debugdevice' make -C debugdevice_full_duplex clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/debugdevice_full_duplex' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/debugdevice_full_duplex' make -C eeprom clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/eeprom' make -C firmware clean make[4]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/eeprom/firmware' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[4]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/eeprom/firmware' make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/eeprom' make -C i2c clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/i2c' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/i2c' make -C lights clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/lights' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/lights' make -C reset clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/reset' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/reset' make -C serial clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/serial' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/serial' make -C timers clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/timers' rm -f build/*.a51 build/*.asm build/*.ihx build/*.lnk build/*.lk build/*.lst build/*.map build/*.mem build/*.rel build/*.rst build/*.rest build/*.sym build/*.adb build/*.cdb build/*.bix make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/timers' make -C usbmon_c clean make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/usbmon_c' Makefile:16: warning: overriding recipe for target 'clean' ../../lib/fx2.mk:100: warning: ignoring old recipe for target 'clean' rm -rf build make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/usbmon_c' make[2]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples' make[1]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j3 "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225' make -C lib make[2]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225' make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. sdcc -mmcs51 -I../include -c serial.c -o serial.rel serial.c:90: warning 59: function 'putchar' must return value serial.c:90: warning 59: function 'putchar' must return value sdcc -mmcs51 -I../include -c i2c.c -o i2c.rel sdcc -mmcs51 -I../include -c delay.c -o delay.rel sdcc -mmcs51 -I../include -c setupdat.c -o setupdat.rel sdcc -mmcs51 -I../include -c gpif.c -o gpif.rel sdcc -mmcs51 -I../include -c eputils.c -o eputils.rel sdcc -mmcs51 -I../include -c interrupts/ep0ack_isr.c -o interrupts/ep0ack_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep0in_isr.c -o interrupts/ep0in_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep0out_isr.c -o interrupts/ep0out_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep0ping_isr.c -o interrupts/ep0ping_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep1in_isr.c -o interrupts/ep1in_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep1out_isr.c -o interrupts/ep1out_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep1ping_isr.c -o interrupts/ep1ping_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep2_isr.c -o interrupts/ep2_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep2ef_isr.c -o interrupts/ep2ef_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep2ff_isr.c -o interrupts/ep2ff_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep2isoerr_isr.c -o interrupts/ep2isoerr_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep2pf_isr.c -o interrupts/ep2pf_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep2ping_isr.c -o interrupts/ep2ping_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep4_isr.c -o interrupts/ep4_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep4ef_isr.c -o interrupts/ep4ef_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep4ff_isr.c -o interrupts/ep4ff_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep4isoerr_isr.c -o interrupts/ep4isoerr_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep4pf_isr.c -o interrupts/ep4pf_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep4ping_isr.c -o interrupts/ep4ping_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep6_isr.c -o interrupts/ep6_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep6ef_isr.c -o interrupts/ep6ef_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep6ff_isr.c -o interrupts/ep6ff_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep6isoerr_isr.c -o interrupts/ep6isoerr_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep6pf_isr.c -o interrupts/ep6pf_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep6ping_isr.c -o interrupts/ep6ping_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep8_isr.c -o interrupts/ep8_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep8ef_isr.c -o interrupts/ep8ef_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep8ff_isr.c -o interrupts/ep8ff_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep8isoerr_isr.c -o interrupts/ep8isoerr_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep8pf_isr.c -o interrupts/ep8pf_isr.rel sdcc -mmcs51 -I../include -c interrupts/ep8ping_isr.c -o interrupts/ep8ping_isr.rel sdcc -mmcs51 -I../include -c interrupts/errlimit_isr.c -o interrupts/errlimit_isr.rel sdcc -mmcs51 -I../include -c interrupts/gpifdone_isr.c -o interrupts/gpifdone_isr.rel sdcc -mmcs51 -I../include -c interrupts/gpifwf_isr.c -o interrupts/gpifwf_isr.rel sdcc -mmcs51 -I../include -c interrupts/hispeed_isr.c -o interrupts/hispeed_isr.rel sdcc -mmcs51 -I../include -c interrupts/ibn_isr.c -o interrupts/ibn_isr.rel sdcc -mmcs51 -I../include -c interrupts/sof_isr.c -o interrupts/sof_isr.rel sdcc -mmcs51 -I../include -c interrupts/spare_isr.c -o interrupts/spare_isr.rel sdcc -mmcs51 -I../include -c interrupts/sudav_isr.c -o interrupts/sudav_isr.rel sdcc -mmcs51 -I../include -c interrupts/suspend_isr.c -o interrupts/suspend_isr.rel sdcc -mmcs51 -I../include -c interrupts/sutok_isr.c -o interrupts/sutok_isr.rel sdcc -mmcs51 -I../include -c interrupts/usbreset_isr.c -o interrupts/usbreset_isr.rel sdas8051 -logs usbav.a51 sdar -rc fx2.lib serial.rel i2c.rel delay.rel setupdat.rel gpif.rel eputils.rel interrupts/ep0ack_isr.rel interrupts/ep0in_isr.rel interrupts/ep0out_isr.rel interrupts/ep0ping_isr.rel interrupts/ep1in_isr.rel interrupts/ep1out_isr.rel interrupts/ep1ping_isr.rel interrupts/ep2_isr.rel interrupts/ep2ef_isr.rel interrupts/ep2ff_isr.rel interrupts/ep2isoerr_isr.rel interrupts/ep2pf_isr.rel interrupts/ep2ping_isr.rel interrupts/ep4_isr.rel interrupts/ep4ef_isr.rel interrupts/ep4ff_isr.rel interrupts/ep4isoerr_isr.rel interrupts/ep4pf_isr.rel interrupts/ep4ping_isr.rel interrupts/ep6_isr.rel interrupts/ep6ef_isr.rel interrupts/ep6ff_isr.rel interrupts/ep6isoerr_isr.rel interrupts/ep6pf_isr.rel interrupts/ep6ping_isr.rel interrupts/ep8_isr.rel interrupts/ep8ef_isr.rel interrupts/ep8ff_isr.rel interrupts/ep8isoerr_isr.rel interrupts/ep8pf_isr.rel interrupts/ep8ping_isr.rel interrupts/errlimit_isr.rel interrupts/gpifdone_isr.rel interrupts/gpifwf_isr.rel interrupts/hispeed_isr.rel interrupts/ibn_isr.rel interrupts/sof_isr.rel interrupts/spare_isr.rel interrupts/sudav_isr.rel interrupts/suspend_isr.rel interrupts/sutok_isr.rel interrupts/usbreset_isr.rel usbav.rel make[2]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/lib' make -C examples make[2]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225' make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. make -C bulkloop make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/bulkloop' mkdir -p build for a in dscr.a51; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in bulkloop.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -c -I ../..//include -I "" $s -o build/$THISREL ; done bulkloop.c:177: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG bulkloop.c:178: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -o build/bulkloop.ihx build/bulkloop.rel build/dscr.rel fx2.lib -L ../..//lib make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/bulkloop' make -C cdc make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc' make -C loopback make[4]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc/loopback' mkdir -p build for a in ../common/dscr.a51; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in ../common/main.c ../common/cdc.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -c -I ../../..//include -I ../common -I ./ $s -o build/$THISREL ; done ./main-custom.c:5: warning 85: in function cdcuser_set_line_rate unreferenced function argument : 'baud_rate' ../common/main.c:177: warning 230: label without statement ../common/main.c:192: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG ../common/main.c:193: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG ../common/cdc.c:58: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -o build/cdc-acm-loopback.ihx build/main.rel build/cdc.rel build/dscr.rel fx2.lib -L ../../..//lib make[4]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc/loopback' make -C to-uart make[4]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc/to-uart' mkdir -p build for a in ../common/dscr.a51; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in ../common/main.c ../common/cdc.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x1e00" -Wl"-b INT2JT=0x3f00" -c -I ../../..//include -I ../common -I ./ $s -o build/$THISREL ; done ../common/main.c:177: warning 230: label without statement ../common/main.c:192: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG ../common/main.c:193: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG ../common/cdc.c:58: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x1e00" -Wl"-b INT2JT=0x3f00" -o build/cdc-acm-to-uart.ihx build/main.rel build/cdc.rel build/dscr.rel fx2.lib -L ../../..//lib make[4]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc/to-uart' make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/cdc' make -C debugdevice make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/debugdevice' mkdir -p build for a in dscr.a51; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in debugdev.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -c -I ../..//include -I "" $s -o build/$THISREL ; done debugdev.c:165: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG debugdev.c:166: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -o build/debugdev.ihx build/debugdev.rel build/dscr.rel fx2.lib -L ../..//lib make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/debugdevice' make -C debugdevice_full_duplex make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/debugdevice_full_duplex' mkdir -p build for a in dscr.a51; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in debugdev.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -c -I ../..//include -I "" $s -o build/$THISREL ; done debugdev.c:253: warning 230: label without statement debugdev.c:271: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG debugdev.c:272: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -o build/debugdev.ihx build/debugdev.rel build/dscr.rel fx2.lib -L ../..//lib g++ -Wall -Wextra -O2 -ggdb -o test test.cpp -lusb-1.0 gcc -Wall -Wextra -O2 -ggdb -o terminal terminal.c -lusb-1.0 make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/debugdevice_full_duplex' make -C eeprom make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/eeprom' make -C firmware make[4]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/eeprom/firmware' mkdir -p build for a in dscr.a51; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in eeprom.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -c -I ../../../include -I "" $s -o build/$THISREL ; done eeprom.c:167: warning 85: in function handle_vendorcommand unreferenced local variable : 'c' eeprom.c:174: warning 85: in function handle_get_interface unreferenced function argument : 'ifc' eeprom.c:183: warning 85: in function handle_set_interface unreferenced function argument : 'ifc' sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -o build/eeprom.ihx build/eeprom.rel build/dscr.rel fx2.lib -L ../../../lib make[4]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/eeprom/firmware' make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/eeprom' make -C i2c make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/i2c' mkdir -p build for a in ; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in i2c.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -c -I ../../include -I "" $s -o build/$THISREL ; done sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -o build/i2c.ihx build/i2c.rel fx2.lib -L ../../lib make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/i2c' make -C lights make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/lights' mkdir -p build for a in ; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in lights.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -c -I ../../include -I "" $s -o build/$THISREL ; done sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -o build/lights.ihx build/lights.rel fx2.lib -L ../../lib make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/lights' make -C reset make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/reset' mkdir -p build for a in ; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in reset.c fx2_c0.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -c -I ../../include -I "" $s -o build/$THISREL ; done sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -o build/reset.ihx build/reset.rel build/fx2_c0.rel fx2.lib -L ../../lib make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/reset' make -C serial make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/serial' mkdir -p build for a in ; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in serial.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -c -I ../../include -I "" $s -o build/$THISREL ; done sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -o build/serial.ihx build/serial.rel fx2.lib -L ../../lib make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/serial' make -C timers make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/timers' mkdir -p build for a in ; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in timers.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -c -I ../../include -I "" $s -o build/$THISREL ; done sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -o build/timers.ihx build/timers.rel fx2.lib -L ../../lib make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/timers' make -C usbmon_c make[3]: Entering directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/usbmon_c' Makefile:16: warning: overriding recipe for target 'clean' ../../lib/fx2.mk:100: warning: ignoring old recipe for target 'clean' mkdir -p build for a in dscr.a51; do \ cp $a build/; \ cd build && sdas8051 -logs `basename $a` && cd ..; done for s in usbmon.c; do \ THISREL=$(basename `echo "$s" | sed -e 's/\.c$/\.rel/'`); \ sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -c -I ../..//include -I "" $s -o build/$THISREL ; done usbmon.c:178: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usbmon.c:179: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG sdcc -mmcs51 --code-size 0x3c00 --xram-size 0x0200 --xram-loc 0x3c00 -Wl"-b DSCR_AREA=0x3e00" -Wl"-b INT2JT=0x3f00" -o build/usbmon.ihx build/usbmon.rel build/dscr.rel fx2.lib -L ../..//lib make[3]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples/usbmon_c' make[2]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225/examples' make[1]: Leaving directory '/build/hdmi2usb-fx2-firmware-0.0.0~git20151225' dh_auto_test create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install dh_install dh_installdocs dh_installchangelogs dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'hdmi2usb-fx2-firmware' in '../hdmi2usb-fx2-firmware_0.0.0~git20151225-3_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/30330 and its subdirectories I: Current time: Sun Jul 18 14:38:03 -12 2021 I: pbuilder-time-stamp: 1626662283 Mon Jul 19 02:38:11 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ff4a-armhf-rb.debian.net. Mon Jul 19 02:38:11 UTC 2021 I: Preparing to do remote build '2' on ff4a-armhf-rb.debian.net. Mon Jul 19 02:39:55 UTC 2021 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. Mon Jul 19 02:39:57 UTC 2021 I: hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.changes: Format: 1.8 Date: Sat, 27 Jun 2020 16:28:37 -0700 Source: hdmi2usb-fx2-firmware Binary: hdmi2usb-fx2-firmware Architecture: all Version: 0.0.0~git20151225-3 Distribution: unstable Urgency: medium Maintainer: Stefano Rivera Changed-By: Stefano Rivera Description: hdmi2usb-fx2-firmware - FX2 firmware for hdmi2usb board development Closes: 963348 Changes: hdmi2usb-fx2-firmware (0.0.0~git20151225-3) unstable; urgency=medium . * Migrate from sdcclib to sdar, fixing FTBFS with sdcc 3.9. (Closes: #963348) * Bump copyright years. * Bump debhelper compat level to 12. * Declare Rules-Requires-Root: no. * Bump Standards-Version to 4.5.0, no changes needed. Checksums-Sha1: 260e4a21ef8323f052c8b28f33388095242d741b 11264 hdmi2usb-fx2-firmware_0.0.0~git20151225-3_all.deb a49c0951366b25d26d0900c284c32fe7874bdab6 4742 hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.buildinfo Checksums-Sha256: 050d2b431dd0fa034990b272c0163cf6c8fb1083c2afb34f831a00df9d67eac7 11264 hdmi2usb-fx2-firmware_0.0.0~git20151225-3_all.deb 26e78cc99288712ea73c9a1304f286830ee980d47550f21152e3a4195f0fa4a8 4742 hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.buildinfo Files: 23fbbe3e9209294cb59bd1f51bf36c12 11264 video optional hdmi2usb-fx2-firmware_0.0.0~git20151225-3_all.deb d0b21608829f007cfdf1775ed9a509b3 4742 video optional hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.buildinfo Mon Jul 19 02:39:58 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.fJ6umVb9ZQ/hdmi2usb-fx2-firmware_0.0.0~git20151225-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.fJ6umVb9ZQ/hdmi2usb-fx2-firmware_0.0.0~git20151225-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.fJ6umVb9ZQ/hdmi2usb-fx2-firmware_0.0.0~git20151225-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.fJ6umVb9ZQ/b1/hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.fJ6umVb9ZQ/b2/hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.286s) 0.286s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.022s) 0.021s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Mon Jul 19 02:40:00 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Mon Jul 19 02:40:00 UTC 2021 I: hdmi2usb-fx2-firmware from bullseye built successfully and reproducibly on armhf. Mon Jul 19 02:40:01 UTC 2021 I: Submitting .buildinfo files to external archives: Mon Jul 19 02:40:01 UTC 2021 I: Submitting 8.0K b1/hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.buildinfo.asc Mon Jul 19 02:40:02 UTC 2021 I: Submitting 8.0K b2/hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.buildinfo.asc Mon Jul 19 02:40:02 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Mon Jul 19 02:40:02 UTC 2021 I: Done submitting .buildinfo files. Mon Jul 19 02:40:02 UTC 2021 I: Removing signed hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.buildinfo.asc files: removed './b1/hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.buildinfo.asc' removed './b2/hdmi2usb-fx2-firmware_0.0.0~git20151225-3_armhf.buildinfo.asc'