Sat Jul 24 16:27:51 UTC 2021 I: starting to build gdisk/bullseye/armhf on jenkins on '2021-07-24 16:27' Sat Jul 24 16:27:51 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_10/8788/console.log Sat Jul 24 16:27:51 UTC 2021 I: Downloading source for bullseye/gdisk=1.0.6-1.1 --2021-07-24 16:27:52-- http://cdn-fastly.deb.debian.org/debian/pool/main/g/gdisk/gdisk_1.0.6-1.1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1896 (1.9K) Saving to: ‘gdisk_1.0.6-1.1.dsc’ 0K . 100% 158M=0s 2021-07-24 16:27:52 (158 MB/s) - ‘gdisk_1.0.6-1.1.dsc’ saved [1896/1896] Sat Jul 24 16:27:52 UTC 2021 I: gdisk_1.0.6-1.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: gdisk Binary: gdisk Architecture: any Version: 1.0.6-1.1 Maintainer: Jonathan Carter Homepage: http://sourceforge.net/projects/gptfdisk/ Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/debian/gdisk Vcs-Git: https://salsa.debian.org/debian/gdisk.git Testsuite: autopkgtest Build-Depends: debhelper-compat (= 13), libncursesw5-dev, libpopt-dev, uuid-dev Package-List: gdisk deb admin optional arch=any Checksums-Sha1: cbb6464b1c78fbe01d43a20df6160ecf89675b24 207017 gdisk_1.0.6.orig.tar.gz 24f207f7a97ae0f249e4c57a8b1d699fbedef12c 5588 gdisk_1.0.6-1.1.debian.tar.xz Checksums-Sha256: ddc551d643a53f0bd4440345d3ae32c49b04a797e9c01036ea460b6bb4168ca8 207017 gdisk_1.0.6.orig.tar.gz 0e555f56ba10ca60ea4acd8d1dbd6c08842e9cca4fea7d809b4e1ba9d5f335de 5588 gdisk_1.0.6-1.1.debian.tar.xz Files: 68da8921f0df2f1aa559f360de9c86dd 207017 gdisk_1.0.6.orig.tar.gz eb39a345408de5db0276782c186c68f2 5588 gdisk_1.0.6-1.1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJHBAEBCAAxFiEEbJ0QSEqa5Mw4X3xxgj6WdgbDS5YFAmAiICMTHHV0a2Fyc2hA ZGViaWFuLm9yZwAKCRCCPpZ2BsNLlhKGD/421ShxqZ2uKMN+xJCugK2LE+0eklaf mAI7YkIQojqeCaX6UMjghf2ojphLupAo8OiAw3tueHJGvdOuaCf1BXSU0DxAHMrk 7VSwFi4vT4t8pJPclTF68JkX67RhPszBGW+45PONz00d7Ifmb4dAJcGpPF5h0Oer YroQ8xdX6luehfvAz3ulxe5UDEHrgUgS0oLk88+Rx0wsT0TEa59IrZ5UH4O3bv/8 6N+Lx9KW9+0WrbKEC/EJfXPnycQShLeSKH2br5mlJ+a4So9s6jxuf5uWKHUDo2zY tDAdmUHb9YTykcq6UxyYn0T6OD2KBOY752nANN9rZ18IrtCPArO4iXPgETzgGZVc 58aON/mJlY0Vzgt5g2iH8Xc4rG4z7VaojU32+R66yS7bcXfwzYFqxtk4LatcFNG7 1tsuRNFbylmYhVogr63IdMtCwSlB+EXDewWpjKoSfEy9O07pexQhv5nO9HzKh7Y1 u4oWWUHoyBdYyWI8CW5hj0ppfhovkJHgcJux7P+Up9KaazHZUz0TFMnqmtrSAvZ8 zxxH9za3fOScxTxGOh9plslAgknojEIAZjnEs1jVxDPABfDmzcROPtlPA34syQCa 4k3i+ZaM+1pq1wvldvSckHz/FHEshqTZnhJ80B95dVlneG+Dssy5N8vX6XyqG6OP kgvJbHBtdBEy1w== =Zv1H -----END PGP SIGNATURE----- Sat Jul 24 16:27:52 UTC 2021 I: Checking whether the package is not for us Sat Jul 24 16:27:52 UTC 2021 I: Starting 1st build on remote node jtx1b-armhf-rb.debian.net. Sat Jul 24 16:27:52 UTC 2021 I: Preparing to do remote build '1' on jtx1b-armhf-rb.debian.net. Sat Jul 24 16:30:00 UTC 2021 I: Deleting $TMPDIR on jtx1b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Jul 24 04:27:59 -12 2021 I: pbuilder-time-stamp: 1627144079 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [gdisk_1.0.6-1.1.dsc] I: copying [./gdisk_1.0.6.orig.tar.gz] I: copying [./gdisk_1.0.6-1.1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig._KqRH9eW/trustedkeys.kbx': General error gpgv: Signature made Mon Feb 8 17:39:47 2021 -12 gpgv: using RSA key 6C9D10484A9AE4CC385F7C71823E967606C34B96 gpgv: issuer "utkarsh@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./gdisk_1.0.6-1.1.dsc dpkg-source: info: extracting gdisk in gdisk-1.0.6 dpkg-source: info: unpacking gdisk_1.0.6.orig.tar.gz dpkg-source: info: unpacking gdisk_1.0.6-1.1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/21235/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='b6d3d8ddb116463fad6f0ec4262364f8' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='21235' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.a5ZzzPT9Ir/pbuilderrc_Mgbe --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.a5ZzzPT9Ir/b1 --logfile b1/build.log gdisk_1.0.6-1.1.dsc' SUDO_GID='114' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux jtx1b 5.10.0-8-arm64 #1 SMP Debian 5.10.46-2 (2021-07-20) aarch64 GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Jun 21 14:26 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Feb 7 02:38 more -rwsr-xr-x 1 root root 34400 Feb 7 02:38 mount -rwxr-xr-x 1 root root 9824 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 14:26 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 21 21:25 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Feb 7 02:38 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 21:55 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Feb 7 02:38 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/21235/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libncursesw5-dev, libpopt-dev, uuid-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libncursesw5-dev; however: Package libncursesw5-dev is not installed. pbuilder-satisfydepends-dummy depends on libpopt-dev; however: Package libpopt-dev is not installed. pbuilder-satisfydepends-dummy depends on uuid-dev; however: Package uuid-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libncurses-dev{a} libncurses6{a} libncursesw5-dev{a} libpipeline1{a} libpopt-dev{a} libpopt0{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} uuid-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 37 newly installed, 0 to remove and 0 not upgraded. Need to get 18.3 MB of archives. After unpacking 65.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-7 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf libncurses6 armhf 6.2+20201114-2 [80.5 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf libncurses-dev armhf 6.2+20201114-2 [308 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libncursesw5-dev armhf 6.2+20201114-2 [940 B] Get: 35 http://deb.debian.org/debian bullseye/main armhf libpopt0 armhf 1.18-2 [46.9 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf libpopt-dev armhf 1.18-2 [52.7 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf uuid-dev armhf 2.36.1-7 [97.9 kB] Fetched 18.3 MB in 3s (6047 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-7_armhf.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../01-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../03-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../07-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../10-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../23-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../25-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../31-libncurses6_6.2+20201114-2_armhf.deb ... Unpacking libncurses6:armhf (6.2+20201114-2) ... Selecting previously unselected package libncurses-dev:armhf. Preparing to unpack .../32-libncurses-dev_6.2+20201114-2_armhf.deb ... Unpacking libncurses-dev:armhf (6.2+20201114-2) ... Selecting previously unselected package libncursesw5-dev:armhf. Preparing to unpack .../33-libncursesw5-dev_6.2+20201114-2_armhf.deb ... Unpacking libncursesw5-dev:armhf (6.2+20201114-2) ... Selecting previously unselected package libpopt0:armhf. Preparing to unpack .../34-libpopt0_1.18-2_armhf.deb ... Unpacking libpopt0:armhf (1.18-2) ... Selecting previously unselected package libpopt-dev:armhf. Preparing to unpack .../35-libpopt-dev_1.18-2_armhf.deb ... Unpacking libpopt-dev:armhf (1.18-2) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../36-uuid-dev_2.36.1-7_armhf.deb ... Unpacking uuid-dev:armhf (2.36.1-7) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up uuid-dev:armhf (2.36.1-7) ... Setting up libncurses6:armhf (6.2+20201114-2) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libelf1:armhf (0.183-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libpopt0:armhf (1.18-2) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up libncurses-dev:armhf (6.2+20201114-2) ... Setting up gettext (0.21-4) ... Setting up libncursesw5-dev:armhf (6.2+20201114-2) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up libpopt-dev:armhf (1.18-2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/gdisk-1.0.6/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../gdisk_1.0.6-1.1_source.changes dpkg-buildpackage: info: source package gdisk dpkg-buildpackage: info: source version 1.0.6-1.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Utkarsh Gupta dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_auto_clean make -j3 clean make[1]: Entering directory '/build/gdisk-1.0.6' rm -f core *.o *~ gdisk sgdisk cgdisk fixparts make[1]: Leaving directory '/build/gdisk-1.0.6' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure debian/rules override_dh_auto_build make[1]: Entering directory '/build/gdisk-1.0.6' dh_auto_build --parallel -- CXX=arm-linux-gnueabihf-g++ make -j3 "INSTALL=install --strip-program=true" CXX=arm-linux-gnueabihf-g\+\+ make[2]: Entering directory '/build/gdisk-1.0.6' arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o crc32.o crc32.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o support.o support.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o guid.o guid.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o gptpart.o gptpart.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o mbrpart.o mbrpart.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o basicmbr.o basicmbr.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o mbr.o mbr.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o gpt.o gpt.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o bsd.o bsd.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o parttypes.o parttypes.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o attributes.o attributes.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o diskio.o diskio.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o diskio-unix.o diskio-unix.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o cgdisk.o cgdisk.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o gptcurses.o gptcurses.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o gdisk.o gdisk.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o gpttext.o gpttext.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o sgdisk.o sgdisk.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o gptcl.o gptcl.cc arm-linux-gnueabihf-g++ -g -O2 -fdebug-prefix-map=/build/gdisk-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o fixparts.o fixparts.cc gptcl.cc: In member function 'int GPTDataCL::BuildMBR(char*, int)': gptcl.cc:493:8: warning: 'eeLast' may be used uninitialized in this function [-Wmaybe-uninitialized] 493 | int eeLast, mbrNum = 0; | ^~~~~~ arm-linux-gnueabihf-g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o cgdisk.o gptcurses.o -Wl,-z,relro -Wl,-z,now -luuid -lncursesw -o cgdisk arm-linux-gnueabihf-g++ support.o diskio.o diskio-unix.o basicmbr.o mbrpart.o fixparts.o -Wl,-z,relro -Wl,-z,now -o fixparts arm-linux-gnueabihf-g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o gdisk.o gpttext.o -Wl,-z,relro -Wl,-z,now -luuid -o gdisk arm-linux-gnueabihf-g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o sgdisk.o gptcl.o -Wl,-z,relro -Wl,-z,now -luuid -lpopt -o sgdisk make[2]: Leaving directory '/build/gdisk-1.0.6' make[1]: Leaving directory '/build/gdisk-1.0.6' dh_auto_test make -j3 test make[1]: Entering directory '/build/gdisk-1.0.6' ./gdisk_test.sh **SUCCESS** Temp disk sucessfully created **Testing gdisk binary** GPT fdisk (gdisk) version 1.0.6 Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Partition table scan: MBR: not present BSD: not present APM: not present GPT: not present Creating new GPT entries in memory. Command (? for help): This option deletes all partitions and creates a new protective MBR. Proceed? (Y/N): Command (? for help): Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.1fZvMXAPJN. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Create new empty GPT table GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): Partition number (1-128, default 1): First sector (34-131038, default = 2048) or {+-}size{KMGTP}: Last sector (2048-131038, default = 131038) or {+-}size{KMGTP}: Current type is 8300 (Linux filesystem) Hex code or GUID (L to show codes, Enter = 8300): Changed type of partition to 'Linux filesystem' Command (? for help): Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.1fZvMXAPJN. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Create new partition GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): Using 1 Enter name: Command (? for help): Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.1fZvMXAPJN. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Change partition 1 name (Linux filesystem -> maHPRNgw) GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): Using 1 Current type is 8300 (Linux filesystem) Hex code or GUID (L to show codes, Enter = 8300): Changed type of partition to 'Linux swap' Command (? for help): Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.1fZvMXAPJN. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Change partition 1 type (8300 -> 8200) GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): Enter backup filename to save: The operation has completed successfully. Command (? for help): **SUCCESS** GPT data backuped sucessfully GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): Using 1 Command (? for help): Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.1fZvMXAPJN. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Delete partition 1 GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): Recovery/transformation command (? for help): b use backup GPT header (rebuilding main) c load backup partition table from disk (rebuilding main) d use main GPT header (rebuilding backup) e load main partition table from disk (rebuilding backup) f load MBR and build fresh GPT from it g convert GPT into MBR and exit h make hybrid MBR i show detailed information on a partition l load partition data from a backup file m return to main menu o print protective MBR data p print the partition table q quit without saving changes t transform BSD disklabel partition v verify disk w write table to disk and exit x extra functionality (experts only) ? print this menu Recovery/transformation command (? for help): Enter backup filename to load: Recovery/transformation command (? for help): Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.1fZvMXAPJN. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Restore the GPT backup GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): Expert command (? for help): Enter the disk's unique GUID ('R' to randomize): The new disk GUID is F97F651D-2047-42C9-824F-0F54E985478C Expert command (? for help): Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.1fZvMXAPJN. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** GUID of disk has been sucessfully changed GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): Expert command (? for help): About to wipe out GPT on /tmp/tmp.1fZvMXAPJN. Proceed? (Y/N): Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) GPT data structures destroyed! You may now partition the disk using fdisk or other utilities. Blank out MBR? (Y/N): Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. **SUCCESS** Wipe GPT table Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Creating new GPT entries in memory. **SUCCESS** EOF successfully exit gdisk **Testing sgdisk binary** Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Creating new GPT entries in memory. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Create new empty GPT table Setting name! partNum is 0 Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Create new partition Setting name! partNum is 0 Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Change partition 1 name (Linux filesystem -> maHPRNgw) Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Change partition 1 type (8300 -> 8200) The operation has completed successfully. **SUCCESS** GPT data backuped sucessfully Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Delete partition 1 GPT fdisk (gdisk) version 1.0.6 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): Recovery/transformation command (? for help): b use backup GPT header (rebuilding main) c load backup partition table from disk (rebuilding main) d use main GPT header (rebuilding backup) e load main partition table from disk (rebuilding backup) f load MBR and build fresh GPT from it g convert GPT into MBR and exit h make hybrid MBR i show detailed information on a partition l load partition data from a backup file m return to main menu o print protective MBR data p print the partition table q quit without saving changes t transform BSD disklabel partition v verify disk w write table to disk and exit x extra functionality (experts only) ? print this menu Recovery/transformation command (? for help): Enter backup filename to load: Recovery/transformation command (? for help): Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.1fZvMXAPJN. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** Restore the GPT backup Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully. **SUCCESS** GUID of disk has been sucessfully changed Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) GPT data structures destroyed! You may now partition the disk using fdisk or other utilities. Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. **SUCCESS** Wipe GPT table Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Warning: Partition table header claims that the size of partition table entries is 0 bytes, but this program supports only 128-byte entries. Adjusting accordingly, but partition table may be garbage. Creating new GPT entries in memory. **SUCCESS** EOF successfully exit gdisk make[1]: Leaving directory '/build/gdisk-1.0.6' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install debian/rules override_dh_install make[1]: Entering directory '/build/gdisk-1.0.6' install -D gdisk /build/gdisk-1.0.6/debian/gdisk/sbin/gdisk install -D sgdisk /build/gdisk-1.0.6/debian/gdisk/sbin/sgdisk install -D cgdisk /build/gdisk-1.0.6/debian/gdisk/sbin/cgdisk install -D fixparts /build/gdisk-1.0.6/debian/gdisk/sbin/fixparts # install index page for doc-base install -D debian/index.html \ /build/gdisk-1.0.6/debian/gdisk/usr/share/doc/gdisk/index.html make[1]: Leaving directory '/build/gdisk-1.0.6' dh_installdocs dh_installchangelogs dh_installman dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: debian/gdisk/sbin/sgdisk contains an unresolvable reference to symbol __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin dpkg-shlibdeps: warning: debian/gdisk/sbin/cgdisk contains an unresolvable reference to symbol __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin dpkg-shlibdeps: warning: debian/gdisk/sbin/gdisk contains an unresolvable reference to symbol __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin dpkg-shlibdeps: warning: debian/gdisk/sbin/fixparts contains an unresolvable reference to symbol __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'gdisk-dbgsym' in '../gdisk-dbgsym_1.0.6-1.1_armhf.deb'. dpkg-deb: building package 'gdisk' in '../gdisk_1.0.6-1.1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../gdisk_1.0.6-1.1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/21235 and its subdirectories I: Current time: Sat Jul 24 04:29:54 -12 2021 I: pbuilder-time-stamp: 1627144194 Sat Jul 24 16:30:02 UTC 2021 I: 1st build successful. Starting 2nd build on remote node virt32a-armhf-rb.debian.net. Sat Jul 24 16:30:02 UTC 2021 I: Preparing to do remote build '2' on virt32a-armhf-rb.debian.net. Sat Jul 24 16:33:12 UTC 2021 I: Deleting $TMPDIR on virt32a-armhf-rb.debian.net. Sat Jul 24 16:33:14 UTC 2021 I: gdisk_1.0.6-1.1_armhf.changes: Format: 1.8 Date: Tue, 09 Feb 2021 11:05:39 +0530 Source: gdisk Binary: gdisk gdisk-dbgsym Architecture: armhf Version: 1.0.6-1.1 Distribution: unstable Urgency: medium Maintainer: Jonathan Carter Changed-By: Utkarsh Gupta Description: gdisk - GPT fdisk text-mode partitioning tool Closes: 981231 Changes: gdisk (1.0.6-1.1) unstable; urgency=medium . * Non-maintainer upload. * Add Restrictions: allow-stderr for autopkgtest. (Closes: #981231) Checksums-Sha1: 9ccc10d64e6fda2060db3ced466e62037d7f5109 1316168 gdisk-dbgsym_1.0.6-1.1_armhf.deb 36981f5a702b51c62cbf40d9b9cf4210dddf50b9 4952 gdisk_1.0.6-1.1_armhf.buildinfo 4955f9f74e30dac5842d624e46db26d61a145302 200420 gdisk_1.0.6-1.1_armhf.deb Checksums-Sha256: 84ee283ebae64836262136419fef1d76489932877dc75ff7584131f268408242 1316168 gdisk-dbgsym_1.0.6-1.1_armhf.deb 69cfffc7e9913179f0fa260073d3bf5306136bfa7b900e6f03d696aba349527e 4952 gdisk_1.0.6-1.1_armhf.buildinfo 97eee032a0cad9326eb2fa80be4fb1fcfccf3615d381052874ab52322ccfd9ab 200420 gdisk_1.0.6-1.1_armhf.deb Files: 7fc4900abc96c74593e9a909b59ecfa3 1316168 debug optional gdisk-dbgsym_1.0.6-1.1_armhf.deb 49575488031057e794ea5b1c12b22be0 4952 admin optional gdisk_1.0.6-1.1_armhf.buildinfo c3a90bfa77088d465afa84950f46c956 200420 admin optional gdisk_1.0.6-1.1_armhf.deb Sat Jul 24 16:33:15 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.a5ZzzPT9Ir/gdisk_1.0.6-1.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.a5ZzzPT9Ir/gdisk_1.0.6-1.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.a5ZzzPT9Ir/gdisk_1.0.6-1.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.a5ZzzPT9Ir/b1/gdisk_1.0.6-1.1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.a5ZzzPT9Ir/b2/gdisk_1.0.6-1.1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.244s) 0.244s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.030s) 0.030s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sat Jul 24 16:33:17 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Sat Jul 24 16:33:17 UTC 2021 I: gdisk from bullseye built successfully and reproducibly on armhf. Sat Jul 24 16:33:18 UTC 2021 I: Submitting .buildinfo files to external archives: Sat Jul 24 16:33:18 UTC 2021 I: Submitting 8.0K b1/gdisk_1.0.6-1.1_armhf.buildinfo.asc Sat Jul 24 16:33:19 UTC 2021 I: Submitting 8.0K b2/gdisk_1.0.6-1.1_armhf.buildinfo.asc Sat Jul 24 16:33:20 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Jul 24 16:33:20 UTC 2021 I: Done submitting .buildinfo files. Sat Jul 24 16:33:20 UTC 2021 I: Removing signed gdisk_1.0.6-1.1_armhf.buildinfo.asc files: removed './b1/gdisk_1.0.6-1.1_armhf.buildinfo.asc' removed './b2/gdisk_1.0.6-1.1_armhf.buildinfo.asc'