Sun Jul 11 14:40:04 UTC 2021 I: starting to build charliecloud/bullseye/armhf on jenkins on '2021-07-11 14:39' Sun Jul 11 14:40:04 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_11/2303/console.log Sun Jul 11 14:40:04 UTC 2021 I: Downloading source for bullseye/charliecloud=0.21-1 --2021-07-11 14:40:04-- http://cdn-fastly.deb.debian.org/debian/pool/main/c/charliecloud/charliecloud_0.21-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2563 (2.5K) Saving to: ‘charliecloud_0.21-1.dsc’ 0K .. 100% 77.6M=0s 2021-07-11 14:40:04 (77.6 MB/s) - ‘charliecloud_0.21-1.dsc’ saved [2563/2563] Sun Jul 11 14:40:04 UTC 2021 I: charliecloud_0.21-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: charliecloud Binary: charliecloud, charliecloud-common, charliecloud-builders, charliecloud-runtime, charliecloud-tests, charliecloud-doc Architecture: linux-any all Version: 0.21-1 Maintainer: Debian HPC Team Uploaders: Lucas Nussbaum , Peter Wienemann Homepage: https://hpc.github.io/charliecloud/ Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/hpc-team/charliecloud/tree/master Vcs-Git: https://salsa.debian.org/hpc-team/charliecloud.git Testsuite: autopkgtest Build-Depends: debhelper-compat (= 13), po-debconf, autoconf-archive, python3-sphinx-rtd-theme Package-List: charliecloud deb metapackages optional arch=all charliecloud-builders deb admin optional arch=linux-any charliecloud-common deb admin optional arch=all charliecloud-doc deb doc optional arch=all charliecloud-runtime deb admin optional arch=linux-any charliecloud-tests deb admin optional arch=linux-any Checksums-Sha1: 755402354c060a05f774b27bae73e4b532937a3f 386637 charliecloud_0.21.orig.tar.gz 2fdcc4e2f210f481facbe9dc69eeb175462f4ec6 11068 charliecloud_0.21-1.debian.tar.xz Checksums-Sha256: e984f3ab04e4e0381107051a22ecbcc81c26e04fcfca8154c1c3c0da96fc47c8 386637 charliecloud_0.21.orig.tar.gz f35044cf362a44588ff31ded671fc50b7b3b671203c18b740bbb1cae52238ded 11068 charliecloud_0.21-1.debian.tar.xz Files: 1f9d27e0bbd7f68dcfa2e8c3a5c5f9ca 386637 charliecloud_0.21.orig.tar.gz f9b133f5ff1381674a04c1aad0f5c033 11068 charliecloud_0.21-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEEBrYs08CqJ6RHEajlAuXO5wyFLHsFAl/ffjhfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldDA2 QjYyQ0QzQzBBQTI3QTQ0NzExQThFNTAyRTVDRUU3MEM4NTJDN0IACgkQAuXO5wyF LHuDDRAAxK4U+ZHDeAHFhkwB4/Q1C/scpctbF3tEgaPqs02Ual8xQEG9fVJ8ruuT RR1l0JVUWmy4y7BtjCTapX5rGaaEYzqNZI6T4SP22g6CocmLxNbAO/Fhr9mm0Of/ nMuHEQ6HFhlncatIIa21TswBdeGyq4K6rRUhMCorjLr7rNPbdEKNQR+1ZXRS5LT6 6H2YN+lZb02h/ranYMxjBpgIp9sHMLXKuOjm4DQpfk1JE1T8rX6dqou6IYrQCHKN XuEOJsrtZsN4hNnwy2hVuXqMaoAyKkbFu6P8qbcDLlO8KNrhRbu+oxedTd05xVKz 3aEjNa7YCodX/gpM980MrIhNJCXvrDY7fGUhmeFsKlaEZ1q93M1+DyRFEZfCKLUs mkTGTVQMhUGxsDXRwQL4ynrvdygqUNsFDu0+Axst4i07FxQV47+WUZHi3v6U1rgp NdLCHBUwt9Jc+vMRiy1e9WraAUIVY3a2Fk7CGvPGpMwbFzlVA5ZWU7UojUCOaz0g kqIG1j0Az3WgCqoUkTMt58+ovLazLNqYROik5Rd/ZagQk2RlgrCWFHJVkCd9LmEa Us/xLLiNCoKgy0jf04MEd/RXEwwr7v9/I/ps1Z8J2k8iu/9JVHkaq/rhiFrSA8Qd YojJbgmS//M/7GjJDyM2hvJU79QQyklw2CTZneryVaI8EWcBRtM= =F29i -----END PGP SIGNATURE----- Sun Jul 11 14:40:04 UTC 2021 I: Checking whether the package is not for us Sun Jul 11 14:40:04 UTC 2021 I: Starting 1st build on remote node virt32b-armhf-rb.debian.net. Sun Jul 11 14:40:04 UTC 2021 I: Preparing to do remote build '1' on virt32b-armhf-rb.debian.net. Sun Jul 11 14:44:05 UTC 2021 I: Deleting $TMPDIR on virt32b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sun Jul 11 02:40:11 -12 2021 I: pbuilder-time-stamp: 1626014411 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [charliecloud_0.21-1.dsc] I: copying [./charliecloud_0.21.orig.tar.gz] I: copying [./charliecloud_0.21-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.o0V1TrFA/trustedkeys.kbx': General error gpgv: Signature made Sun Dec 20 04:39:20 2020 -12 gpgv: using RSA key 06B62CD3C0AA27A44711A8E502E5CEE70C852C7B gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./charliecloud_0.21-1.dsc dpkg-source: info: extracting charliecloud in charliecloud-0.21 dpkg-source: info: unpacking charliecloud_0.21.orig.tar.gz dpkg-source: info: unpacking charliecloud_0.21-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying adjust-test-suite-path.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/8971/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='997c9385b1f04e87aaf69c8552653a29' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='8971' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.nZ1377Th4y/pbuilderrc_Tqcr --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.nZ1377Th4y/b1 --logfile b1/build.log charliecloud_0.21-1.dsc' SUDO_GID='112' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux virt32b 5.10.0-7-armmp-lpae #1 SMP Debian 5.10.40-1 (2021-05-28) armv7l GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Jun 21 14:26 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Feb 7 02:38 more -rwsr-xr-x 1 root root 34400 Feb 7 02:38 mount -rwxr-xr-x 1 root root 9824 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 14:26 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 8 21:26 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Feb 7 02:38 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 21:55 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Feb 7 02:38 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/8971/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), po-debconf, autoconf-archive, python3-sphinx-rtd-theme dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on po-debconf; however: Package po-debconf is not installed. pbuilder-satisfydepends-dummy depends on autoconf-archive; however: Package autoconf-archive is not installed. pbuilder-satisfydepends-dummy depends on python3-sphinx-rtd-theme; however: Package python3-sphinx-rtd-theme is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} autoconf-archive{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} docutils-common{a} dwz{a} file{a} fonts-font-awesome{a} fonts-lato{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libjs-jquery{a} libjs-sphinxdoc{a} libjs-underscore{a} libmagic-mgc{a} libmagic1{a} libmpdec3{a} libpipeline1{a} libpython3-stdlib{a} libpython3.9-minimal{a} libpython3.9-stdlib{a} libreadline8{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} openssl{a} po-debconf{a} python-babel-localedata{a} python3{a} python3-alabaster{a} python3-babel{a} python3-certifi{a} python3-chardet{a} python3-distutils{a} python3-docutils{a} python3-idna{a} python3-imagesize{a} python3-jinja2{a} python3-lib2to3{a} python3-markupsafe{a} python3-minimal{a} python3-packaging{a} python3-pkg-resources{a} python3-pygments{a} python3-pyparsing{a} python3-requests{a} python3-roman{a} python3-six{a} python3-snowballstemmer{a} python3-sphinx{a} python3-sphinx-rtd-theme{a} python3-tz{a} python3-urllib3{a} python3.9{a} python3.9-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} sphinx-common{a} sphinx-rtd-theme-common{a} xml-core{a} The following packages are RECOMMENDED but will NOT be installed: curl javascript-common libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libpaper-utils lynx python3-pil wget 0 packages upgraded, 80 newly installed, 0 to remove and 0 not upgraded. Need to get 37.9 MB of archives. After unpacking 151 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-7 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf autoconf-archive all 20190106-2.1 [746 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf fonts-lato all 2.0-2.1 [2696 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf libpython3.9-minimal armhf 3.9.2-1 [790 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf libexpat1 armhf 2.2.10-2 [76.3 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf python3.9-minimal armhf 3.9.2-1 [1630 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf python3-minimal armhf 3.9.2-3 [38.2 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf media-types all 4.0.0 [30.3 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf libmpdec3 armhf 2.5.1-1 [74.9 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf readline-common all 8.1-1 [73.7 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf libreadline8 armhf 8.1-1 [147 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf libpython3.9-stdlib armhf 3.9.2-1 [1608 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf python3.9 armhf 3.9.2-1 [466 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf libpython3-stdlib armhf 3.9.2-3 [21.4 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf python3 armhf 3.9.2-3 [37.9 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf sgml-base all 1.30 [15.1 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf openssl armhf 1.1.1k-1 [826 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf ca-certificates all 20210119 [158 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 46 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 47 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 48 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 49 http://deb.debian.org/debian bullseye/main armhf xml-core all 0.18+nmu1 [23.8 kB] Get: 50 http://deb.debian.org/debian bullseye/main armhf docutils-common all 0.16+dfsg-4 [129 kB] Get: 51 http://deb.debian.org/debian bullseye/main armhf fonts-font-awesome all 5.0.10+really4.7.0~dfsg-4.1 [517 kB] Get: 52 http://deb.debian.org/debian bullseye/main armhf libjs-jquery all 3.5.1+dfsg+~3.5.5-7 [315 kB] Get: 53 http://deb.debian.org/debian bullseye/main armhf libjs-underscore all 1.9.1~dfsg-3 [100 kB] Get: 54 http://deb.debian.org/debian bullseye/main armhf libjs-sphinxdoc all 3.4.3-2 [127 kB] Get: 55 http://deb.debian.org/debian bullseye/main armhf python-babel-localedata all 2.8.0+dfsg.1-7 [4997 kB] Get: 56 http://deb.debian.org/debian bullseye/main armhf python3-alabaster all 0.7.8-1.1 [18.6 kB] Get: 57 http://deb.debian.org/debian bullseye/main armhf python3-pkg-resources all 52.0.0-4 [190 kB] Get: 58 http://deb.debian.org/debian bullseye/main armhf python3-tz all 2021.1-1 [34.8 kB] Get: 59 http://deb.debian.org/debian bullseye/main armhf python3-babel all 2.8.0+dfsg.1-7 [100 kB] Get: 60 http://deb.debian.org/debian bullseye/main armhf python3-certifi all 2020.6.20-1 [151 kB] Get: 61 http://deb.debian.org/debian bullseye/main armhf python3-chardet all 4.0.0-1 [99.0 kB] Get: 62 http://deb.debian.org/debian bullseye/main armhf python3-lib2to3 all 3.9.2-1 [77.8 kB] Get: 63 http://deb.debian.org/debian bullseye/main armhf python3-distutils all 3.9.2-1 [143 kB] Get: 64 http://deb.debian.org/debian bullseye/main armhf python3-roman all 2.0.0-5 [9064 B] Get: 65 http://deb.debian.org/debian bullseye/main armhf python3-docutils all 0.16+dfsg-4 [384 kB] Get: 66 http://deb.debian.org/debian bullseye/main armhf python3-idna all 2.10-1 [37.4 kB] Get: 67 http://deb.debian.org/debian bullseye/main armhf python3-imagesize all 1.2.0-2 [5824 B] Get: 68 http://deb.debian.org/debian bullseye/main armhf python3-markupsafe armhf 1.1.1-1+b3 [14.6 kB] Get: 69 http://deb.debian.org/debian bullseye/main armhf python3-jinja2 all 2.11.3-1 [114 kB] Get: 70 http://deb.debian.org/debian bullseye/main armhf python3-pyparsing all 2.4.7-1 [109 kB] Get: 71 http://deb.debian.org/debian bullseye/main armhf python3-packaging all 20.9-2 [33.5 kB] Get: 72 http://deb.debian.org/debian bullseye/main armhf python3-pygments all 2.7.1+dfsg-2.1 [657 kB] Get: 73 http://deb.debian.org/debian bullseye/main armhf python3-six all 1.16.0-1 [17.1 kB] Get: 74 http://deb.debian.org/debian bullseye/main armhf python3-urllib3 all 1.26.5-1~exp1 [114 kB] Get: 75 http://deb.debian.org/debian bullseye/main armhf python3-requests all 2.25.1+dfsg-2 [69.3 kB] Get: 76 http://deb.debian.org/debian bullseye/main armhf python3-snowballstemmer all 2.1.0-1 [58.7 kB] Get: 77 http://deb.debian.org/debian bullseye/main armhf sphinx-common all 3.4.3-2 [578 kB] Get: 78 http://deb.debian.org/debian bullseye/main armhf python3-sphinx all 3.4.3-2 [545 kB] Get: 79 http://deb.debian.org/debian bullseye/main armhf sphinx-rtd-theme-common all 0.5.1+dfsg-1 [995 kB] Get: 80 http://deb.debian.org/debian bullseye/main armhf python3-sphinx-rtd-theme all 0.5.1+dfsg-1 [20.9 kB] Fetched 37.9 MB in 4s (10.1 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../0-bsdextrautils_2.36.1-7_armhf.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../1-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../2-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../3-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../4-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package autoconf-archive. Preparing to unpack .../5-autoconf-archive_20190106-2.1_all.deb ... Unpacking autoconf-archive (20190106-2.1) ... Selecting previously unselected package fonts-lato. Preparing to unpack .../6-fonts-lato_2.0-2.1_all.deb ... Unpacking fonts-lato (2.0-2.1) ... Selecting previously unselected package libpython3.9-minimal:armhf. Preparing to unpack .../7-libpython3.9-minimal_3.9.2-1_armhf.deb ... Unpacking libpython3.9-minimal:armhf (3.9.2-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../8-libexpat1_2.2.10-2_armhf.deb ... Unpacking libexpat1:armhf (2.2.10-2) ... Selecting previously unselected package python3.9-minimal. Preparing to unpack .../9-python3.9-minimal_3.9.2-1_armhf.deb ... Unpacking python3.9-minimal (3.9.2-1) ... Setting up libpython3.9-minimal:armhf (3.9.2-1) ... Setting up libexpat1:armhf (2.2.10-2) ... Setting up python3.9-minimal (3.9.2-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21453 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.9.2-3_armhf.deb ... Unpacking python3-minimal (3.9.2-3) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_4.0.0_all.deb ... Unpacking media-types (4.0.0) ... Selecting previously unselected package libmpdec3:armhf. Preparing to unpack .../2-libmpdec3_2.5.1-1_armhf.deb ... Unpacking libmpdec3:armhf (2.5.1-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) ... Selecting previously unselected package libreadline8:armhf. Preparing to unpack .../4-libreadline8_8.1-1_armhf.deb ... Unpacking libreadline8:armhf (8.1-1) ... Selecting previously unselected package libpython3.9-stdlib:armhf. Preparing to unpack .../5-libpython3.9-stdlib_3.9.2-1_armhf.deb ... Unpacking libpython3.9-stdlib:armhf (3.9.2-1) ... Selecting previously unselected package python3.9. Preparing to unpack .../6-python3.9_3.9.2-1_armhf.deb ... Unpacking python3.9 (3.9.2-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.9.2-3_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.9.2-3) ... Setting up python3-minimal (3.9.2-3) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21874 files and directories currently installed.) Preparing to unpack .../00-python3_3.9.2-3_armhf.deb ... Unpacking python3 (3.9.2-3) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.30_all.deb ... Unpacking sgml-base (1.30) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package openssl. Preparing to unpack .../03-openssl_1.1.1k-1_armhf.deb ... Unpacking openssl (1.1.1k-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../04-ca-certificates_20210119_all.deb ... Unpacking ca-certificates (20210119) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../05-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../06-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../07-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../08-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../09-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../24-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package xml-core. Preparing to unpack .../30-xml-core_0.18+nmu1_all.deb ... Unpacking xml-core (0.18+nmu1) ... Selecting previously unselected package docutils-common. Preparing to unpack .../31-docutils-common_0.16+dfsg-4_all.deb ... Unpacking docutils-common (0.16+dfsg-4) ... Selecting previously unselected package fonts-font-awesome. Preparing to unpack .../32-fonts-font-awesome_5.0.10+really4.7.0~dfsg-4.1_all.deb ... Unpacking fonts-font-awesome (5.0.10+really4.7.0~dfsg-4.1) ... Selecting previously unselected package libjs-jquery. Preparing to unpack .../33-libjs-jquery_3.5.1+dfsg+~3.5.5-7_all.deb ... Unpacking libjs-jquery (3.5.1+dfsg+~3.5.5-7) ... Selecting previously unselected package libjs-underscore. Preparing to unpack .../34-libjs-underscore_1.9.1~dfsg-3_all.deb ... Unpacking libjs-underscore (1.9.1~dfsg-3) ... Selecting previously unselected package libjs-sphinxdoc. Preparing to unpack .../35-libjs-sphinxdoc_3.4.3-2_all.deb ... Unpacking libjs-sphinxdoc (3.4.3-2) ... Selecting previously unselected package python-babel-localedata. Preparing to unpack .../36-python-babel-localedata_2.8.0+dfsg.1-7_all.deb ... Unpacking python-babel-localedata (2.8.0+dfsg.1-7) ... Selecting previously unselected package python3-alabaster. Preparing to unpack .../37-python3-alabaster_0.7.8-1.1_all.deb ... Unpacking python3-alabaster (0.7.8-1.1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../38-python3-pkg-resources_52.0.0-4_all.deb ... Unpacking python3-pkg-resources (52.0.0-4) ... Selecting previously unselected package python3-tz. Preparing to unpack .../39-python3-tz_2021.1-1_all.deb ... Unpacking python3-tz (2021.1-1) ... Selecting previously unselected package python3-babel. Preparing to unpack .../40-python3-babel_2.8.0+dfsg.1-7_all.deb ... Unpacking python3-babel (2.8.0+dfsg.1-7) ... Selecting previously unselected package python3-certifi. Preparing to unpack .../41-python3-certifi_2020.6.20-1_all.deb ... Unpacking python3-certifi (2020.6.20-1) ... Selecting previously unselected package python3-chardet. Preparing to unpack .../42-python3-chardet_4.0.0-1_all.deb ... Unpacking python3-chardet (4.0.0-1) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../43-python3-lib2to3_3.9.2-1_all.deb ... Unpacking python3-lib2to3 (3.9.2-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../44-python3-distutils_3.9.2-1_all.deb ... Unpacking python3-distutils (3.9.2-1) ... Selecting previously unselected package python3-roman. Preparing to unpack .../45-python3-roman_2.0.0-5_all.deb ... Unpacking python3-roman (2.0.0-5) ... Selecting previously unselected package python3-docutils. Preparing to unpack .../46-python3-docutils_0.16+dfsg-4_all.deb ... Unpacking python3-docutils (0.16+dfsg-4) ... Selecting previously unselected package python3-idna. Preparing to unpack .../47-python3-idna_2.10-1_all.deb ... Unpacking python3-idna (2.10-1) ... Selecting previously unselected package python3-imagesize. Preparing to unpack .../48-python3-imagesize_1.2.0-2_all.deb ... Unpacking python3-imagesize (1.2.0-2) ... Selecting previously unselected package python3-markupsafe. Preparing to unpack .../49-python3-markupsafe_1.1.1-1+b3_armhf.deb ... Unpacking python3-markupsafe (1.1.1-1+b3) ... Selecting previously unselected package python3-jinja2. Preparing to unpack .../50-python3-jinja2_2.11.3-1_all.deb ... Unpacking python3-jinja2 (2.11.3-1) ... Selecting previously unselected package python3-pyparsing. Preparing to unpack .../51-python3-pyparsing_2.4.7-1_all.deb ... Unpacking python3-pyparsing (2.4.7-1) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../52-python3-packaging_20.9-2_all.deb ... Unpacking python3-packaging (20.9-2) ... Selecting previously unselected package python3-pygments. Preparing to unpack .../53-python3-pygments_2.7.1+dfsg-2.1_all.deb ... Unpacking python3-pygments (2.7.1+dfsg-2.1) ... Selecting previously unselected package python3-six. Preparing to unpack .../54-python3-six_1.16.0-1_all.deb ... Unpacking python3-six (1.16.0-1) ... Selecting previously unselected package python3-urllib3. Preparing to unpack .../55-python3-urllib3_1.26.5-1~exp1_all.deb ... Unpacking python3-urllib3 (1.26.5-1~exp1) ... Selecting previously unselected package python3-requests. Preparing to unpack .../56-python3-requests_2.25.1+dfsg-2_all.deb ... Unpacking python3-requests (2.25.1+dfsg-2) ... Selecting previously unselected package python3-snowballstemmer. Preparing to unpack .../57-python3-snowballstemmer_2.1.0-1_all.deb ... Unpacking python3-snowballstemmer (2.1.0-1) ... Selecting previously unselected package sphinx-common. Preparing to unpack .../58-sphinx-common_3.4.3-2_all.deb ... Unpacking sphinx-common (3.4.3-2) ... Selecting previously unselected package python3-sphinx. Preparing to unpack .../59-python3-sphinx_3.4.3-2_all.deb ... Unpacking python3-sphinx (3.4.3-2) ... Selecting previously unselected package sphinx-rtd-theme-common. Preparing to unpack .../60-sphinx-rtd-theme-common_0.5.1+dfsg-1_all.deb ... Unpacking sphinx-rtd-theme-common (0.5.1+dfsg-1) ... Selecting previously unselected package python3-sphinx-rtd-theme. Preparing to unpack .../61-python3-sphinx-rtd-theme_0.5.1+dfsg-1_all.deb ... Unpacking python3-sphinx-rtd-theme (0.5.1+dfsg-1) ... Setting up media-types (4.0.0) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up fonts-lato (2.0-2.1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up autoconf-archive (20190106-2.1) ... Setting up file (1:5.39-3) ... Setting up python-babel-localedata (2.8.0+dfsg.1-7) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libmpdec3:armhf (2.5.1-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up sgml-base (1.30) ... Setting up libjs-jquery (3.5.1+dfsg+~3.5.5-7) ... Setting up openssl (1.1.1k-1) ... Setting up libelf1:armhf (0.183-1) ... Setting up readline-common (8.1-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up fonts-font-awesome (5.0.10+really4.7.0~dfsg-4.1) ... Setting up sphinx-rtd-theme-common (0.5.1+dfsg-1) ... Setting up libjs-underscore (1.9.1~dfsg-3) ... Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libreadline8:armhf (8.1-1) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 129 added, 0 removed; done. Setting up libjs-sphinxdoc (3.4.3-2) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up xml-core (0.18+nmu1) ... Setting up libpython3.9-stdlib:armhf (3.9.2-1) ... Setting up libpython3-stdlib:armhf (3.9.2-3) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up sphinx-common (3.4.3-2) ... Setting up python3.9 (3.9.2-1) ... Setting up debhelper (13.3.4) ... Setting up python3 (3.9.2-3) ... Setting up python3-markupsafe (1.1.1-1+b3) ... Setting up python3-tz (2021.1-1) ... Setting up python3-six (1.16.0-1) ... Setting up python3-roman (2.0.0-5) ... Setting up python3-jinja2 (2.11.3-1) ... Setting up python3-pyparsing (2.4.7-1) ... Setting up python3-certifi (2020.6.20-1) ... Setting up python3-snowballstemmer (2.1.0-1) ... Setting up python3-idna (2.10-1) ... Setting up python3-urllib3 (1.26.5-1~exp1) ... Setting up python3-lib2to3 (3.9.2-1) ... Setting up python3-imagesize (1.2.0-2) ... Setting up python3-pkg-resources (52.0.0-4) ... Setting up python3-distutils (3.9.2-1) ... Setting up python3-babel (2.8.0+dfsg.1-7) ... update-alternatives: using /usr/bin/pybabel-python3 to provide /usr/bin/pybabel (pybabel) in auto mode Setting up python3-alabaster (0.7.8-1.1) ... Setting up python3-pygments (2.7.1+dfsg-2.1) ... Setting up python3-packaging (20.9-2) ... Setting up python3-chardet (4.0.0-1) ... Setting up python3-requests (2.25.1+dfsg-2) ... Processing triggers for libc-bin (2.31-12) ... Processing triggers for sgml-base (1.30) ... Setting up docutils-common (0.16+dfsg-4) ... Processing triggers for sgml-base (1.30) ... Setting up python3-docutils (0.16+dfsg-4) ... update-alternatives: using /usr/share/docutils/scripts/python3/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html4 to provide /usr/bin/rst2html4 (rst2html4) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html5 to provide /usr/bin/rst2html5 (rst2html5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode Setting up python3-sphinx (3.4.3-2) ... Setting up python3-sphinx-rtd-theme (0.5.1+dfsg-1) ... Processing triggers for ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/charliecloud-0.21/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../charliecloud_0.21-1_source.changes dpkg-buildpackage: info: source package charliecloud dpkg-buildpackage: info: source version 0.21-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Peter Wienemann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/charliecloud-0.21' dh_auto_clean debconf-updatepo make[1]: Leaving directory '/build/charliecloud-0.21' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf configure.ac:37: installing 'build-aux/compile' configure.ac:18: installing 'build-aux/config.guess' configure.ac:18: installing 'build-aux/config.sub' configure.ac:24: installing 'build-aux/install-sh' configure.ac:24: installing 'build-aux/missing' bin/Makefile.am: installing 'build-aux/depcomp' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/charliecloud-0.21' # Install test suite into /usr/libexec/installed-tests # (see https://lists.debian.org/debian-devel/2020/06/msg00224.html) dh_auto_configure -- --libdir=/usr/lib --libexecdir=/usr/libexec/installed-tests ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --libdir=/usr/lib --libexecdir=/usr/libexec/installed-tests checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none configure: use_werror: yes checking whether C compiler accepts -std=c99 -Wpedantic -Wall -Werror... yes checking for a sed that does not truncate output... /bin/sed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking whether gcc is Clang... no checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking whether more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... no checking for shm_open in -lrt... yes checking for asprintf... yes checking whether sphinx-build executable path has been provided... no checking for sphinx-build... /usr/bin/sphinx-build checking if /usr/bin/sphinx-build is executable... ok checking if /usr/bin/sphinx-build version >= 1.2.3... ok (3.4.3) checking for sphinx-build Python... /usr/bin/python3 checking if "/usr/bin/python3" starts with slash... ok checking if /usr/bin/python3 is executable... ok checking if /usr/bin/python3 version >= 0.14... ok (0.16) checking for sphinx_rtd_theme module... yes checking if /usr/bin/python3 is executable... ok checking if /usr/bin/python3 version >= 0.2.4... ok (0.5.1) checking for bash... bash checking if bash version >= 4.1... ok (5.1.4(1)-release) checking for bats... no checking for buildah... no checking for docker... no checking for mksquashfs... no checking for mktemp... mktemp checking for nvidia-container-cli... no checking for nVidia libraries & executables... no checking if "/usr/bin/env python3" starts with slash... ok checking for python3... python3 checking if python3 version >= 3.4... ok (3.9.2) checking for lark-parser module... no checking for requests module... yes checking if python3 version >= 2.6.0... ok (2.25.1) checking for shellcheck... no checking for squashfuse... no checking for tar... tar checking if in chroot... yes checking if user+mount namespaces work... no checking for wget... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating bin/Makefile config.status: creating doc/Makefile config.status: creating examples/Makefile config.status: creating lib/Makefile config.status: creating misc/Makefile config.status: creating packaging/Makefile config.status: creating test/Makefile config.status: creating bin/config.h config.status: executing depfiles commands configure: Dependencies report =================== Below is a summary of configure's findings. Caveats ~~~~~~~ Charliecloud's run-time dependencies are lazy; features just try to use their dependencies and error if there's a problem. This report summarizes what configure found on *this system*, because that's often useful, but none of the run-time findings change what is built and installed. Listed versions are minimums. These are a bit fuzzy. Try it even if configure thinks a version is too old, and please report back to us. Building Charliecloud ~~~~~~~~~~~~~~~~~~~~~ required: C99 compiler ... gcc documentation: yes sphinx-build(1) ≥ 1.2.3 ... ok (3.4.3) sphinx-build(1) Python ... /usr/bin/python3 "docutils" module ≥ 0.14 ... ok (0.16) "sphinx-rtd-theme" module ≥ 0.2.4 ... ok (0.5.1) will build and install: HTML documentation ... yes man pages ... yes test suite ... yes ch-image(1) ... yes Building images via our wrappers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ with Buildah: no Buildah ≥ 1.11.2 ... not found with ch-image(1): no enabled ... yes Python shebang line ... /usr/bin/env python3 Python in shebang ≥ 3.4 ... ok (3.9.2) "lark-parser" module ≥ 0.7.1 ... not found "requests" module ≥ 2.6.0 ... ok (2.25.1) ch-run(1) ... no with Docker: no Docker ≥ 17.03 ... not found mktemp(1) ... mktemp Managing container images ~~~~~~~~~~~~~~~~~~~~~~~~~ build from Dockerfile with ch-build(1): no at least one builder ... no access to an image repository ... assumed yes pack images from builder storage to tarball: yes at least one builder ... no tar(1) ... tar pack images from builder storage to SquashFS: no at least one builder ... no mksquashfs(1) ≥ 4.2 ... not found Note: Pulling/pushing images from/to a repository is currently done using the builder directly. Running containers ~~~~~~~~~~~~~~~~~~ ch-run(1): no user+mount namespaces ... no Warning: configure is running in a chroot, but user namespaces cannot be created in a chroot; see the man page unshare(2). Therefore, the above may be a false negative. However, note that like all the run-time configure tests, this is informational only and does not affect the build. unpack image tarballs: yes tar(1) ... tar ch-mount(1) and ch-umount(1) SquashFS images: no SquashFUSE ≥ 0.1.100 ... not found inject nVidia GPU libraries: no nvidia-container-cli(1) ≥ 1.0.0 ... not found nVidia libraries & executables present ... no Test suite ~~~~~~~~~~ basic tests: no test suite enabled ... yes ch-run(1) ... no Bats ≥ 0.4.0 ... not found Bash ≥ 4.1 ... ok (5.1.4(1)-release) wget(1) ≥ 1.11 ... not found recommended tests with tarballs: no basic tests ... no any builder above ... no access to Docker Hub or mirror ... assumed yes pack images with tar ... yes unpack images with tar ... yes recommended tests with SquashFS: no recommended tests with tar ... no pack images with SquashFS ... no mount/unmount SquashFS images ... no complete test suite: no recommended tests with SquashFS ... no documentation ... yes ShellCheck ≥ 0.6.0 ... not found generic sudo ... assumed yes make[1]: Leaving directory '/build/charliecloud-0.21' dh_auto_build make -j3 make[1]: Entering directory '/build/charliecloud-0.21' Making all in lib make[2]: Entering directory '/build/charliecloud-0.21/lib' rm -f contributors.bash printf "VERSION='0.21'\n" > version.py printf "# shellcheck shell=sh disable=SC2034\n" > version.sh printf '0.21\n' > version.txt printf '# shellcheck shell=bash\n' >> contributors.bash printf "ch_version='0.21'\n" >> version.sh printf 'declare -a ch_contributors\n' >> contributors.bash ln -s . charliecloud sed -En 's/^\*.+<(.+@.+)>.*$/ch_contributors+=('"'"'\1'"'"')/p' < ../README.rst >> contributors.bash make[2]: Leaving directory '/build/charliecloud-0.21/lib' Making all in bin make[2]: Entering directory '/build/charliecloud-0.21/bin' make all-am make[3]: Entering directory '/build/charliecloud-0.21/bin' gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -c -o ch-checkns.o ch-checkns.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -c -o ch_misc.o ch_misc.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -pthread -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -c -o ch_run-ch-run.o `test -f 'ch-run.c' || echo './'`ch-run.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -pthread -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -c -o ch_run-ch_core.o `test -f 'ch_core.c' || echo './'`ch_core.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -pthread -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -c -o ch_run-ch_misc.o `test -f 'ch_misc.c' || echo './'`ch_misc.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -c -o ch-ssh.o ch-ssh.c rm -f ch-run-oci sed -E 's|%PYTHON_SHEBANG%|/usr/bin/env python3|' < ch-run-oci.py.in > ch-run-oci chmod +rx,-w ch-run-oci # respects umask rm -f ch-image sed -E 's|%PYTHON_SHEBANG%|/usr/bin/env python3|' < ch-image.py.in > ch-image chmod +rx,-w ch-image # respects umask rm -f ch-grow sed -E 's|%PYTHON_SHEBANG%|/usr/bin/env python3|' < ch-grow.py.in > ch-grow chmod +rx,-w ch-grow # respects umask gcc -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -Wl,-z,relro -Wl,-z,now -o ch-checkns ch-checkns.o ch_misc.o gcc -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -Wl,-z,relro -Wl,-z,now -o ch-ssh ch-ssh.o ch_misc.o gcc -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -pthread -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -Wl,-z,relro -Wl,-z,now -o ch-run ch_run-ch-run.o ch_run-ch_core.o ch_run-ch_misc.o -lrt make[3]: Leaving directory '/build/charliecloud-0.21/bin' make[2]: Leaving directory '/build/charliecloud-0.21/bin' Making all in doc make[2]: Entering directory '/build/charliecloud-0.21/doc' cat ../config.log | ./make-deps-overview > _deps.rst /usr/bin/sphinx-build -b html -d ./doctrees -W . ./html Running Sphinx v3.4.3 making output directory... done building [mo]: targets for 0 po files that are out of date building [html]: targets for 25 source files that are out of date updating environment: [new config] 25 added, 0 changed, 0 removed reading sources... [ 4%] ch-build reading sources... [ 8%] ch-build2dir reading sources... [ 12%] ch-builder2squash reading sources... [ 16%] ch-builder2tar reading sources... [ 20%] ch-checkns reading sources... [ 24%] ch-dir2squash reading sources... [ 28%] ch-fromhost reading sources... [ 32%] ch-grow reading sources... [ 36%] ch-image reading sources... [ 40%] ch-mount reading sources... [ 44%] ch-pull2dir reading sources... [ 48%] ch-pull2tar reading sources... [ 52%] ch-run reading sources... [ 56%] ch-run-oci reading sources... [ 60%] ch-ssh reading sources... [ 64%] ch-tar2dir reading sources... [ 68%] ch-test reading sources... [ 72%] ch-umount reading sources... [ 76%] charliecloud reading sources... [ 80%] command-usage reading sources... [ 84%] dev reading sources... [ 88%] faq reading sources... [ 92%] index reading sources... [ 96%] install reading sources... [100%] tutorial looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 4%] ch-build writing output... [ 8%] ch-build2dir writing output... [ 12%] ch-builder2squash writing output... [ 16%] ch-builder2tar writing output... [ 20%] ch-checkns writing output... [ 24%] ch-dir2squash writing output... [ 28%] ch-fromhost writing output... [ 32%] ch-grow writing output... [ 36%] ch-image writing output... [ 40%] ch-mount writing output... [ 44%] ch-pull2dir writing output... [ 48%] ch-pull2tar writing output... [ 52%] ch-run writing output... [ 56%] ch-run-oci writing output... [ 60%] ch-ssh writing output... [ 64%] ch-tar2dir writing output... [ 68%] ch-test writing output... [ 72%] ch-umount writing output... [ 76%] charliecloud writing output... [ 80%] command-usage writing output... [ 84%] dev writing output... [ 88%] faq writing output... [ 92%] index writing output... [ 96%] install writing output... [100%] tutorial generating indices... done writing additional pages... search done copying images... [100%] rd100-winner.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done build succeeded. The HTML pages are in html. touch html/.nojekyll rm -f ./html/_deps.html \ ./html/charliecloud.html \ ./html/ch-*.html \ ./html/bugs.html \ ./html/objects.inv \ ./html/see_also.html /usr/bin/sphinx-build -b man -d ./doctrees -W . ./man Running Sphinx v3.4.3 loading pickled environment... done building [mo]: targets for 0 po files that are out of date building [man]: all manpages updating environment: 0 added, 0 changed, 0 removed looking for now-outdated files... none found writing... charliecloud.7 { } ch-build.1 { } ch-build2dir.1 { } ch-builder2squash.1 { } ch-builder2tar.1 { } ch-checkns.1 { } ch-dir2squash.1 { } ch-grow.1 { } ch-fromhost.1 { } ch-image.1 { } ch-mount.1 { } ch-pull2dir.1 { } ch-pull2tar.1 { } ch-run.1 { } ch-run-oci.1 { } ch-ssh.1 { } ch-tar2dir.1 { } ch-test.1 { } ch-umount.1 { } done build succeeded. The manual pages are in man. make[2]: Leaving directory '/build/charliecloud-0.21/doc' Making all in examples make[2]: Entering directory '/build/charliecloud-0.21/examples' ln -fTs dirCb copy/dirCa/symlink-to-dirCb ln -fTs fileDa copy/dirD/symlink-to-fileDa ln -fTs dirEb copy/dirEa/symlink-to-dirEb ln -fTs filey copy/dirG/s_dir2 ln -fTs diry copy/dirG/s_dir3 ln -fTs filey copy/dirG/s_file2 ln -fTs diry copy/dirG/s_file3 ln -fTs fileA copy/symlink-to-fileA ln -fTs fileB copy/symlink-to-fileB-A ln -fTs fileB copy/symlink-to-fileB-B make[2]: Leaving directory '/build/charliecloud-0.21/examples' Making all in misc make[2]: Entering directory '/build/charliecloud-0.21/misc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/charliecloud-0.21/misc' Making all in packaging make[2]: Entering directory '/build/charliecloud-0.21/packaging' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/charliecloud-0.21/packaging' Making all in test make[2]: Entering directory '/build/charliecloud-0.21/test' gcc -o sotest/libsotest.so.1.0 -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -shared -fPIC -Wl,-soname,libsotest.so.1 -lc sotest/libsotest.c rm -f docs-sane sed -E 's|%PYTHON_SHEBANG%|/usr/bin/env python3|' < docs-sane.py.in > docs-sane rm -f make-perms-test sed -E 's|%PYTHON_SHEBANG%|/usr/bin/env python3|' < make-perms-test.py.in > make-perms-test chmod +rx,-w docs-sane # respects umask ln -fTs /tmp fixtures/symlink-to-tmp chmod +rx,-w make-perms-test # respects umask ln -fTs ./libsotest.so.1.0 sotest/libsotest.so ln -fTs ./libsotest.so.1.0 sotest/libsotest.so.1 mkdir -p sotest/lib gcc -o sotest/sotest -g -O2 -fdebug-prefix-map=/build/charliecloud-0.21=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -Wpedantic -Wall -Werror -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -L./sotest -lsotest sotest/sotest.c sotest/libsotest.so.1.0 sotest/libsotest.so sotest/libsotest.so.1 cp -a sotest/libsotest.so.1.0 sotest/lib/libsotest.so.1.0 mkdir -p sotest/bin cp -a sotest/sotest sotest/bin/sotest make[2]: Leaving directory '/build/charliecloud-0.21/test' make[2]: Entering directory '/build/charliecloud-0.21' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/charliecloud-0.21' make[1]: Leaving directory '/build/charliecloud-0.21' dh_auto_test make -j3 check VERBOSE=1 make[1]: Entering directory '/build/charliecloud-0.21' Making check in lib make[2]: Entering directory '/build/charliecloud-0.21/lib' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/charliecloud-0.21/lib' Making check in bin make[2]: Entering directory '/build/charliecloud-0.21/bin' make[2]: Leaving directory '/build/charliecloud-0.21/bin' Making check in doc make[2]: Entering directory '/build/charliecloud-0.21/doc' /usr/bin/sphinx-build -b html -d ./doctrees -W . ./html Running Sphinx v3.4.3 loading pickled environment... done building [mo]: targets for 0 po files that are out of date building [html]: targets for 19 source files that are out of date updating environment: 0 added, 0 changed, 0 removed looking for now-outdated files... none found preparing documents... done writing output... [ 5%] ch-build writing output... [ 10%] ch-build2dir writing output... [ 15%] ch-builder2squash writing output... [ 20%] ch-builder2tar writing output... [ 25%] ch-checkns writing output... [ 30%] ch-dir2squash writing output... [ 35%] ch-fromhost writing output... [ 40%] ch-grow writing output... [ 45%] ch-image writing output... [ 50%] ch-mount writing output... [ 55%] ch-pull2dir writing output... [ 60%] ch-pull2tar writing output... [ 65%] ch-run writing output... [ 70%] ch-run-oci writing output... [ 75%] ch-ssh writing output... [ 80%] ch-tar2dir writing output... [ 85%] ch-test writing output... [ 90%] ch-umount writing output... [ 95%] charliecloud writing output... [100%] index generating indices... done writing additional pages... search done copying images... [100%] rd100-winner.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done build succeeded. The HTML pages are in html. touch html/.nojekyll rm -f ./html/_deps.html \ ./html/charliecloud.html \ ./html/ch-*.html \ ./html/bugs.html \ ./html/objects.inv \ ./html/see_also.html /usr/bin/sphinx-build -b man -d ./doctrees -W . ./man Running Sphinx v3.4.3 loading pickled environment... done building [mo]: targets for 0 po files that are out of date building [man]: all manpages updating environment: 0 added, 0 changed, 0 removed looking for now-outdated files... none found writing... charliecloud.7 { } ch-build.1 { } ch-build2dir.1 { } ch-builder2squash.1 { } ch-builder2tar.1 { } ch-checkns.1 { } ch-dir2squash.1 { } ch-grow.1 { } ch-fromhost.1 { } ch-image.1 { } ch-mount.1 { } ch-pull2dir.1 { } ch-pull2tar.1 { } ch-run.1 { } ch-run-oci.1 { } ch-ssh.1 { } ch-tar2dir.1 { } ch-test.1 { } ch-umount.1 { } done build succeeded. The manual pages are in man. make[2]: Leaving directory '/build/charliecloud-0.21/doc' Making check in examples make[2]: Entering directory '/build/charliecloud-0.21/examples' ln -fTs dirCb copy/dirCa/symlink-to-dirCb ln -fTs fileDa copy/dirD/symlink-to-fileDa ln -fTs dirEb copy/dirEa/symlink-to-dirEb ln -fTs filey copy/dirG/s_dir2 ln -fTs diry copy/dirG/s_dir3 ln -fTs filey copy/dirG/s_file2 ln -fTs diry copy/dirG/s_file3 ln -fTs fileA copy/symlink-to-fileA ln -fTs fileB copy/symlink-to-fileB-A ln -fTs fileB copy/symlink-to-fileB-B make[2]: Leaving directory '/build/charliecloud-0.21/examples' Making check in misc make[2]: Entering directory '/build/charliecloud-0.21/misc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/charliecloud-0.21/misc' Making check in packaging make[2]: Entering directory '/build/charliecloud-0.21/packaging' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/charliecloud-0.21/packaging' Making check in test make[2]: Entering directory '/build/charliecloud-0.21/test' ln -fTs /tmp fixtures/symlink-to-tmp make[2]: Leaving directory '/build/charliecloud-0.21/test' make[2]: Entering directory '/build/charliecloud-0.21' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/build/charliecloud-0.21' make[1]: Leaving directory '/build/charliecloud-0.21' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/charliecloud-0.21' dh_auto_install make -j3 install DESTDIR=/build/charliecloud-0.21/debian/tmp AM_UPDATE_INFO_DIR=no make[2]: Entering directory '/build/charliecloud-0.21' Making install in lib make[3]: Entering directory '/build/charliecloud-0.21/lib' make[4]: Entering directory '/build/charliecloud-0.21/lib' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/lib/charliecloud' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/lib/charliecloud' /usr/bin/install -c -m 644 base.sh build.py fakeroot.py charliecloud.py misc.py '/build/charliecloud-0.21/debian/tmp/usr/lib/charliecloud' /usr/bin/install -c -m 644 contributors.bash version.py version.sh version.txt '/build/charliecloud-0.21/debian/tmp/usr/lib/charliecloud' make[4]: Leaving directory '/build/charliecloud-0.21/lib' make[3]: Leaving directory '/build/charliecloud-0.21/lib' Making install in bin make[3]: Entering directory '/build/charliecloud-0.21/bin' make[4]: Entering directory '/build/charliecloud-0.21/bin' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/bin' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/bin' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/bin' /usr/bin/install -c ch-run-oci ch-image ch-grow '/build/charliecloud-0.21/debian/tmp/usr/bin' /usr/bin/install -c ch-checkns ch-run ch-ssh '/build/charliecloud-0.21/debian/tmp/usr/bin' /usr/bin/install -c ch-build ch-build2dir ch-builder2squash ch-builder2tar ch-dir2squash ch-fromhost ch-mount ch-pull2dir ch-pull2tar ch-tar2dir ch-test ch-umount '/build/charliecloud-0.21/debian/tmp/usr/bin' make[4]: Leaving directory '/build/charliecloud-0.21/bin' make[3]: Leaving directory '/build/charliecloud-0.21/bin' Making install in doc make[3]: Entering directory '/build/charliecloud-0.21/doc' /usr/bin/sphinx-build -b html -d ./doctrees -W . ./html Running Sphinx v3.4.3 loading pickled environment... done building [mo]: targets for 0 po files that are out of date building [html]: targets for 19 source files that are out of date updating environment: 0 added, 0 changed, 0 removed looking for now-outdated files... none found preparing documents... done writing output... [ 5%] ch-build writing output... [ 10%] ch-build2dir writing output... [ 15%] ch-builder2squash writing output... [ 20%] ch-builder2tar writing output... [ 25%] ch-checkns writing output... [ 30%] ch-dir2squash writing output... [ 35%] ch-fromhost writing output... [ 40%] ch-grow writing output... [ 45%] ch-image writing output... [ 50%] ch-mount writing output... [ 55%] ch-pull2dir writing output... [ 60%] ch-pull2tar writing output... [ 65%] ch-run writing output... [ 70%] ch-run-oci writing output... [ 75%] ch-ssh writing output... [ 80%] ch-tar2dir writing output... [ 85%] ch-test writing output... [ 90%] ch-umount writing output... [ 95%] charliecloud writing output... [100%] index generating indices... done writing additional pages... search done copying images... [100%] rd100-winner.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done build succeeded. The HTML pages are in html. touch html/.nojekyll rm -f ./html/_deps.html \ ./html/charliecloud.html \ ./html/ch-*.html \ ./html/bugs.html \ ./html/objects.inv \ ./html/see_also.html /usr/bin/sphinx-build -b man -d ./doctrees -W . ./man Running Sphinx v3.4.3 loading pickled environment... done building [mo]: targets for 0 po files that are out of date building [man]: all manpages updating environment: 0 added, 0 changed, 0 removed looking for now-outdated files... none found writing... charliecloud.7 { } ch-build.1 { } ch-build2dir.1 { } ch-builder2squash.1 { } ch-builder2tar.1 { } ch-checkns.1 { } ch-dir2squash.1 { } ch-grow.1 { } ch-fromhost.1 { } ch-image.1 { } ch-mount.1 { } ch-pull2dir.1 { } ch-pull2tar.1 { } ch-run.1 { } ch-run-oci.1 { } ch-ssh.1 { } ch-tar2dir.1 { } ch-test.1 { } ch-umount.1 { } done build succeeded. The manual pages are in man. make[4]: Entering directory '/build/charliecloud-0.21/doc' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/sphinx-build -b html -d ./doctrees -W . ./html Running Sphinx v3.4.3 loading pickled environment... done building [mo]: targets for 0 po files that are out of date building [html]: targets for 19 source files that are out of date updating environment: 0 added, 0 changed, 0 removed looking for now-outdated files... none found preparing documents... done writing output... [ 5%] ch-build writing output... [ 10%] ch-build2dir writing output... [ 15%] ch-builder2squash writing output... [ 20%] ch-builder2tar writing output... [ 25%] ch-checkns writing output... [ 30%] ch-dir2squash writing output... [ 35%] ch-fromhost writing output... [ 40%] ch-grow writing output... [ 45%] ch-image writing output... [ 50%] ch-mount writing output... [ 55%] ch-pull2dir writing output... [ 60%] ch-pull2tar writing output... [ 65%] ch-run writing output... [ 70%] ch-run-oci writing output... [ 75%] ch-ssh writing output... [ 80%] ch-tar2dir writing output... [ 85%] ch-test writing output... [ 90%] ch-umount writing output... [ 95%] charliecloud writing output... [100%] index generating indices... done writing additional pages... search done copying images... [100%] rd100-winner.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done build succeeded. The HTML pages are in html. touch html/.nojekyll rm -f ./html/_deps.html \ ./html/charliecloud.html \ ./html/ch-*.html \ ./html/bugs.html \ ./html/objects.inv \ ./html/see_also.html /usr/bin/sphinx-build -b man -d ./doctrees -W . ./man /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/html' /usr/bin/install -c -m 644 html/searchindex.js html/command-usage.html html/dev.html html/faq.html html/index.html html/install.html html/search.html html/tutorial.html '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/html' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/html/_images' /usr/bin/install -c -m 644 html/_images/rd100-winner.png '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/html/_images' Running Sphinx v3.4.3 loading pickled environment... done building [mo]: targets for 0 po files that are out of date building [man]: all manpages updating environment: 0 added, 0 changed, 0 removed looking for now-outdated files... none found writing... charliecloud.7 { } ch-build.1 { } ch-build2dir.1 { } ch-builder2squash.1 { } ch-builder2tar.1 { } ch-checkns.1 { } ch-dir2squash.1 { } ch-grow.1 { } ch-fromhost.1 { } ch-image.1 { } ch-mount.1 { } ch-pull2dir.1 { } ch-pull2tar.1 { } ch-run.1 { } ch-run-oci.1 { } ch-ssh.1 { } ch-tar2dir.1 { } ch-test.1 { } ch-umount.1 { } done build succeeded. The manual pages are in man. /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/man/man1' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/man/man7' /usr/bin/install -c -m 644 man/ch-build.1 man/ch-build2dir.1 man/ch-builder2squash.1 man/ch-builder2tar.1 man/ch-checkns.1 man/ch-dir2squash.1 man/ch-fromhost.1 man/ch-grow.1 man/ch-image.1 man/ch-mount.1 man/ch-pull2dir.1 man/ch-pull2tar.1 man/ch-run.1 man/ch-run-oci.1 man/ch-ssh.1 man/ch-tar2dir.1 man/ch-test.1 man/ch-umount.1 '/build/charliecloud-0.21/debian/tmp/usr/share/man/man1' /usr/bin/install -c -m 644 man/charliecloud.7 '/build/charliecloud-0.21/debian/tmp/usr/share/man/man7' make install-data-hook make[5]: Entering directory '/build/charliecloud-0.21/doc' cp -r html/_sources /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/html cp -r html/_static /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/html find /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/html/_sources -xtype f -exec chmod 644 {} \; find /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/html/_static -xtype d -exec chmod 755 {} \; find /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/html/_static -xtype f -exec chmod 644 {} \; make[5]: Leaving directory '/build/charliecloud-0.21/doc' make[4]: Leaving directory '/build/charliecloud-0.21/doc' make[3]: Leaving directory '/build/charliecloud-0.21/doc' Making install in examples make[3]: Entering directory '/build/charliecloud-0.21/examples' ln -fTs dirCb copy/dirCa/symlink-to-dirCb ln -fTs fileDa copy/dirD/symlink-to-fileDa ln -fTs dirEb copy/dirEa/symlink-to-dirEb ln -fTs filey copy/dirG/s_dir2 ln -fTs diry copy/dirG/s_dir3 ln -fTs filey copy/dirG/s_file2 ln -fTs diry copy/dirG/s_file3 ln -fTs fileA copy/symlink-to-fileA ln -fTs fileB copy/symlink-to-fileB-A ln -fTs fileB copy/symlink-to-fileB-B make[4]: Entering directory '/build/charliecloud-0.21/examples' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/mpihello' /usr/bin/install -c -m 644 mpihello/Dockerfile.mpich mpihello/Dockerfile.openmpi mpihello/Makefile mpihello/hello.c mpihello/slurm.sh mpihello/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/mpihello' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/s_dir4' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/chtest/' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/hello/' /usr/bin/install -c hello/hello.sh '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/hello/' /usr/bin/install -c -m 644 copy/dirG/s_dir4/file_ '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/s_dir4' /usr/bin/install -c chtest/Build chtest/bind_priv.py chtest/dev_proc_sys.py chtest/fs_perms.py chtest/printns chtest/signal_out.py '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/chtest/' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy' /usr/bin/install -c -m 644 copy/Dockerfile copy/fileA copy/fileB copy/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/diry' /usr/bin/install -c -m 644 copy/dirG/diry/file_ '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/diry' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirB' /usr/bin/install -c -m 644 copy/dirB/fileBa copy/dirB/fileBb '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirB' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirEa/dirEb' /usr/bin/install -c -m 644 copy/dirEa/dirEb/fileEba copy/dirEa/dirEb/fileEbb '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirEa/dirEb' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/s_file4' /usr/bin/install -c -m 644 copy/dirG/s_file4/file_ '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/s_file4' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF' /usr/bin/install -c -m 644 copy/dirF/file19a3 copy/dirF/file19a2 '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/chtest' /usr/bin/install -c -m 644 chtest/Makefile chtest/chroot-escape.c chtest/mknods.c chtest/setgroups.c chtest/setuid.c '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/chtest' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/obspy' /usr/bin/install -c -m 644 obspy/Dockerfile obspy/README obspy/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/obspy' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF/dir19a3' /usr/bin/install -c -m 644 copy/dirF/dir19a3/file19b1 '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF/dir19a3' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/lammps' /usr/bin/install -c -m 644 lammps/Dockerfile lammps/melt.patch lammps/simple.patch lammps/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/lammps' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG' /usr/bin/install -c -m 644 copy/dirG/filey copy/dirG/s_dir1 copy/dirG/s_file1 '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF/dir19a2/dir19b3' /usr/bin/install -c -m 644 copy/dirF/dir19a2/dir19b3/file19c1 '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF/dir19a2/dir19b3' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/exhaustive' /usr/bin/install -c -m 644 exhaustive/Dockerfile exhaustive/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/exhaustive' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/spark' /usr/bin/install -c -m 644 spark/Dockerfile spark/slurm.sh spark/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/spark' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/spack' /usr/bin/install -c -m 644 spack/Dockerfile spack/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/spack' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/hello' /usr/bin/install -c -m 644 hello/Dockerfile hello/README hello/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/hello' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirD' /usr/bin/install -c -m 644 copy/dirD/fileDa '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirD' /usr/bin/install -c -m 644 Dockerfile.centos7 Dockerfile.centos8 Dockerfile.debian9 Dockerfile.mpich Dockerfile.nvidia Dockerfile.openmpi dont-init-ucx-on-intel-cray.patch '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/.' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirA' /usr/bin/install -c -m 644 copy/dirA/fileAa '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirA' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirCa/dirCb' /usr/bin/install -c -m 644 copy/dirCa/dirCb/fileCba copy/dirCa/dirCb/fileCbb '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirCa/dirCb' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/mpibench' /usr/bin/install -c -m 644 mpibench/Dockerfile.mpich mpibench/Dockerfile.openmpi mpibench/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/mpibench' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF/dir19a2' /usr/bin/install -c -m 644 copy/dirF/dir19a2/file19b2 copy/dirF/dir19a2/file19b3 '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF/dir19a2' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/lustre' /usr/bin/install -c -m 644 lustre/Dockerfile lustre/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/lustre' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF/dir19a2/dir19b2' /usr/bin/install -c -m 644 copy/dirF/dir19a2/dir19b2/file19c1 '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirF/dir19a2/dir19b2' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/multistage' /usr/bin/install -c -m 644 multistage/Dockerfile multistage/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/multistage' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/paraview' /usr/bin/install -c -m 644 paraview/Dockerfile paraview/cone.2ranks.vtk paraview/cone.nranks.vtk paraview/cone.png paraview/cone.py paraview/cone.serial.vtk paraview/test.bats '/build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/paraview' make install-data-hook make[5]: Entering directory '/build/charliecloud-0.21/examples' ln -fTs dirCb /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirCa/symlink-to-dirCb ln -fTs fileDa /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirD/symlink-to-fileDa ln -fTs dirEb /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirEa/symlink-to-dirEb ln -fTs filey /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/s_dir2 ln -fTs diry /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/s_dir3 ln -fTs filey /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/s_file2 ln -fTs diry /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/dirG/s_file3 ln -fTs fileA /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/symlink-to-fileA ln -fTs fileB /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/symlink-to-fileB-A ln -fTs fileB /build/charliecloud-0.21/debian/tmp/usr/share/doc/charliecloud/examples/copy/symlink-to-fileB-B make[5]: Leaving directory '/build/charliecloud-0.21/examples' make[4]: Leaving directory '/build/charliecloud-0.21/examples' make[3]: Leaving directory '/build/charliecloud-0.21/examples' Making install in misc make[3]: Entering directory '/build/charliecloud-0.21/misc' make[4]: Entering directory '/build/charliecloud-0.21/misc' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/charliecloud-0.21/misc' make[3]: Leaving directory '/build/charliecloud-0.21/misc' Making install in packaging make[3]: Entering directory '/build/charliecloud-0.21/packaging' make[4]: Entering directory '/build/charliecloud-0.21/packaging' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/charliecloud-0.21/packaging' make[3]: Leaving directory '/build/charliecloud-0.21/packaging' Making install in test make[3]: Entering directory '/build/charliecloud-0.21/test' ln -fTs /tmp fixtures/symlink-to-tmp make[4]: Entering directory '/build/charliecloud-0.21/test' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/sotest/bin/' /usr/bin/install -c Build.centos7xz Build.ch-build2dir Build.ch-pull2dir Build.ch-pull2tar Build.docker_pull Build.missing docs-sane make-perms-test '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/sotest/lib/' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/sotest/' /usr/bin/install -c sotest/bin/sotest '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/sotest/bin/' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/make-auto.d' /usr/bin/install -c sotest/libsotest.so sotest/libsotest.so.1 sotest/libsotest.so.1.0 sotest/sotest '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/sotest/' /usr/bin/install -c -m 644 make-auto.d/build.bats.in make-auto.d/build_custom.bats.in make-auto.d/builder_to_archive.bats.in make-auto.d/unpack.bats.in '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/make-auto.d' /usr/bin/install -c sotest/lib/libsotest.so.1.0 '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/sotest/lib/' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/run' /usr/bin/install -c -m 644 run/build-rpms.bats run/ch-fromhost.bats run/ch-run_escalated.bats run/ch-run_isolation.bats run/ch-run_join.bats run/ch-run_misc.bats run/ch-run_uidgid.bats run/ch-tar2dir.bats '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/run' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/fixtures' /usr/bin/install -c -m 644 fixtures/empty-file '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/fixtures' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/sotest' /usr/bin/install -c -m 644 sotest/files_inferrable.txt sotest/libsotest.c sotest/sotest.c '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/sotest' /bin/mkdir -p '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/build' /usr/bin/install -c -m 644 build/10_sanity.bats build/50_ch-image.bats build/50_dockerfile.bats build/50_fakeroot.bats build/50_misc.bats build/50_pull.bats build/99_cleanup.bats '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/build' /usr/bin/install -c -m 644 .dockerignore Dockerfile.00_tiny Dockerfile.argenv Dockerfile.build2dir common.bash run_first.bats '/build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/.' make install-data-hook make[5]: Entering directory '/build/charliecloud-0.21/test' mkdir -p /build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/fixtures ln -fTs /tmp /build/charliecloud-0.21/debian/tmp/usr/libexec/installed-tests/charliecloud/test/fixtures/symlink-to-tmp make[5]: Leaving directory '/build/charliecloud-0.21/test' make[4]: Leaving directory '/build/charliecloud-0.21/test' make[3]: Leaving directory '/build/charliecloud-0.21/test' make[3]: Entering directory '/build/charliecloud-0.21' make[4]: Entering directory '/build/charliecloud-0.21' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/charliecloud-0.21' make[3]: Leaving directory '/build/charliecloud-0.21' make[2]: Leaving directory '/build/charliecloud-0.21' dh_installdebconf # We cannot use dh_sphinxdoc since both the looks_like_sphinx_doc and # the looks_like_sphinx_singlehtml_doc checks fail. For details see # https://salsa.debian.org/python-team/modules/sphinx/-/blob/debian/3.1.2-1/debian/dh-sphinxdoc/dh_sphinxdoc#L192-223 # Thus we need to patch out bundled Javascript code ourselves. # Patch out bundled jquery.js rm debian/tmp/usr/share/doc/charliecloud/html/_static/jquery.js ln -s /usr/share/javascript/jquery/jquery.js debian/tmp/usr/share/doc/charliecloud/html/_static/jquery.js # Patch out bundled underscore.js rm debian/tmp/usr/share/doc/charliecloud/html/_static/underscore.js ln -s /usr/share/javascript/underscore/underscore.js debian/tmp/usr/share/doc/charliecloud/html/_static/underscore.js # Patch out bundled doctools.js rm debian/tmp/usr/share/doc/charliecloud/html/_static/doctools.js ln -s /usr/share/javascript/sphinxdoc/1.0/doctools.js debian/tmp/usr/share/doc/charliecloud/html/_static/doctools.js # Patch out bundled searchtools.js rm debian/tmp/usr/share/doc/charliecloud/html/_static/searchtools.js ln -s /usr/share/javascript/sphinxdoc/1.0/searchtools.js debian/tmp/usr/share/doc/charliecloud/html/_static/searchtools.js # Patch out bundled language_data.js rm debian/tmp/usr/share/doc/charliecloud/html/_static/language_data.js ln -s /usr/share/javascript/sphinxdoc/1.0/language_data.js debian/tmp/usr/share/doc/charliecloud/html/_static/language_data.js # Patch out bundled fonts directory rm -rf debian/tmp/usr/share/doc/charliecloud/html/_static/fonts ln -s /usr/share/sphinx_rtd_theme/static/fonts debian/tmp/usr/share/doc/charliecloud/html/_static/fonts # Patch out bundled css directory rm -rf debian/tmp/usr/share/doc/charliecloud/html/_static/css ln -s /usr/share/sphinx_rtd_theme/static/css debian/tmp/usr/share/doc/charliecloud/html/_static/css # Patch out bundled js directory rm -rf debian/tmp/usr/share/doc/charliecloud/html/_static/js ln -s /usr/share/sphinx_rtd_theme/static/js debian/tmp/usr/share/doc/charliecloud/html/_static/js make[1]: Leaving directory '/build/charliecloud-0.21' dh_install dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_installdebconf dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a debian/rules override_dh_makeshlibs make[1]: Entering directory '/build/charliecloud-0.21' # exclude toy library from being processed dh_makeshlibs -Xlibsotest make[1]: Leaving directory '/build/charliecloud-0.21' debian/rules override_dh_shlibdeps make[1]: Entering directory '/build/charliecloud-0.21' dh_shlibdeps -l/usr/libexec/installed-tests/charliecloud/sotest make[1]: Leaving directory '/build/charliecloud-0.21' dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'charliecloud-tests-dbgsym' in '../charliecloud-tests-dbgsym_0.21-1_armhf.deb'. dpkg-deb: building package 'charliecloud' in '../charliecloud_0.21-1_all.deb'. dpkg-deb: building package 'charliecloud-runtime' in '../charliecloud-runtime_0.21-1_armhf.deb'. dpkg-deb: building package 'charliecloud-doc' in '../charliecloud-doc_0.21-1_all.deb'. dpkg-deb: building package 'charliecloud-common' in '../charliecloud-common_0.21-1_all.deb'. dpkg-deb: building package 'charliecloud-runtime-dbgsym' in '../charliecloud-runtime-dbgsym_0.21-1_armhf.deb'. dpkg-deb: building package 'charliecloud-builders' in '../charliecloud-builders_0.21-1_armhf.deb'. dpkg-deb: building package 'charliecloud-tests' in '../charliecloud-tests_0.21-1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../charliecloud_0.21-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/8971 and its subdirectories I: Current time: Sun Jul 11 02:44:00 -12 2021 I: pbuilder-time-stamp: 1626014640 Sun Jul 11 14:44:07 UTC 2021 I: 1st build successful. Starting 2nd build on remote node jtx1c-armhf-rb.debian.net. Sun Jul 11 14:44:07 UTC 2021 I: Preparing to do remote build '2' on jtx1c-armhf-rb.debian.net. Sun Jul 11 14:47:54 UTC 2021 I: Deleting $TMPDIR on jtx1c-armhf-rb.debian.net. Sun Jul 11 14:47:56 UTC 2021 I: charliecloud_0.21-1_armhf.changes: Format: 1.8 Date: Sun, 20 Dec 2020 15:44:37 +0100 Source: charliecloud Binary: charliecloud charliecloud-builders charliecloud-common charliecloud-doc charliecloud-runtime charliecloud-runtime-dbgsym charliecloud-tests charliecloud-tests-dbgsym Architecture: armhf all Version: 0.21-1 Distribution: unstable Urgency: medium Maintainer: Debian HPC Team Changed-By: Peter Wienemann Description: charliecloud - user-defined software stacks (UDSS) for HPC centers (metapackage) charliecloud-builders - user-defined software stacks (UDSS) for HPC centers (builders) charliecloud-common - user-defined software stacks (UDSS) for HPC centers (common files charliecloud-doc - user-defined software stacks (UDSS) for HPC centers (documentatio charliecloud-runtime - user-defined software stacks (UDSS) for HPC centers (runtime tool charliecloud-tests - user-defined software stacks (UDSS) for HPC centers (test suite) Changes: charliecloud (0.21-1) unstable; urgency=medium . * New upstream version 0.21 * Drop patch move-charliecloud-man-page-to-section7.patch (applied upstream) * d/charliecloud-builders.{install,manpages}: Add ch-image builder * Bump Standards-Version to 4.5.1 (no changes required) * Override Lintian's duplicate-files tag for various example files Checksums-Sha1: a5f43e940151e6c3680cfe50adbfe4323a6ac917 41480 charliecloud-builders_0.21-1_armhf.deb 4d45c3830d56adf0de7df8f9db98323f685fc8eb 36012 charliecloud-common_0.21-1_all.deb 8545053786617c1a1b3e3e2f0989e943d4d95842 270216 charliecloud-doc_0.21-1_all.deb af5390d6365e0d0b31fa7c9d39d910993333a929 39792 charliecloud-runtime-dbgsym_0.21-1_armhf.deb 9d932e814d5fe8dc9b2213591f515658f7348d0c 37788 charliecloud-runtime_0.21-1_armhf.deb 318ced3eed1912279f3c8da9ee1f62da5de546bf 4832 charliecloud-tests-dbgsym_0.21-1_armhf.deb e240b5a0f0a062bf3edc6ae47dc88e97d77794a7 50736 charliecloud-tests_0.21-1_armhf.deb 083372d4648c8b2ca7b626a688777e43f3424966 6448 charliecloud_0.21-1_all.deb 67107696fba68fb051060badbff87e2c47371499 8229 charliecloud_0.21-1_armhf.buildinfo Checksums-Sha256: 434511af6da43d9b558db9f10b06298985d5b41e9dd145d98660d9ef89a8a008 41480 charliecloud-builders_0.21-1_armhf.deb c2578f8e8928cdc8aaab1cd80d77c642e6e8dfb92208a1fe28331b0560e2c623 36012 charliecloud-common_0.21-1_all.deb dd4153671c22eae6f9a12060245e85bc218983a610b009bc81deb4b9c98cbc0c 270216 charliecloud-doc_0.21-1_all.deb 35769d683e6054ed05bb7939df9d4db18034fa71440da5a049e5662b9a5db8e6 39792 charliecloud-runtime-dbgsym_0.21-1_armhf.deb 2888879afd9391d467b4f95e321aac66e2495a50fbf1e3f1873ff0a57dbbeeee 37788 charliecloud-runtime_0.21-1_armhf.deb edaf4c6d07b043d0c2059e28e0aeaee3db5deb2dd15804b5e88b7b7a22e2a648 4832 charliecloud-tests-dbgsym_0.21-1_armhf.deb e79f766ba9816b8e31ff2291d97f170395c230f1d618cc272429238ad69fff1b 50736 charliecloud-tests_0.21-1_armhf.deb c74ad777874e68b0bcafaa3ac1d4b6000577a6747d3d8d4bb8b9cc005864184b 6448 charliecloud_0.21-1_all.deb 0a8b84dde0e225f34c4832fd47df427cde2f40f916a0bdf2a135103cc9b8e453 8229 charliecloud_0.21-1_armhf.buildinfo Files: 8df9626ed93a1f99974666336553efa9 41480 admin optional charliecloud-builders_0.21-1_armhf.deb 244f5778b2d223e9509ae10d2aaf6ed2 36012 admin optional charliecloud-common_0.21-1_all.deb f66690885418e0167debd4c441e7c864 270216 doc optional charliecloud-doc_0.21-1_all.deb 7f769ab74b2d24c852a7011d60bec962 39792 debug optional charliecloud-runtime-dbgsym_0.21-1_armhf.deb 3681c618cdb3c89aff9706d8c478b940 37788 admin optional charliecloud-runtime_0.21-1_armhf.deb e81eb7984eac3ec9e123bf70fab56248 4832 debug optional charliecloud-tests-dbgsym_0.21-1_armhf.deb 23249a29bbb020c88202bad8c44b9daf 50736 admin optional charliecloud-tests_0.21-1_armhf.deb bb4c55c18cf47cb5708de38ddc4637f1 6448 metapackages optional charliecloud_0.21-1_all.deb c9116a2822fd9a56629dfaa1968df770 8229 admin optional charliecloud_0.21-1_armhf.buildinfo Sun Jul 11 14:47:58 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.nZ1377Th4y/charliecloud_0.21-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.nZ1377Th4y/charliecloud_0.21-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.nZ1377Th4y/charliecloud_0.21-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.nZ1377Th4y/b1/charliecloud_0.21-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.nZ1377Th4y/b2/charliecloud_0.21-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.281s) 0.281s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.027s) 0.027s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sun Jul 11 14:47:59 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Sun Jul 11 14:47:59 UTC 2021 I: charliecloud from bullseye built successfully and reproducibly on armhf. Sun Jul 11 14:48:00 UTC 2021 I: Submitting .buildinfo files to external archives: Sun Jul 11 14:48:00 UTC 2021 I: Submitting 12K b1/charliecloud_0.21-1_armhf.buildinfo.asc Sun Jul 11 14:48:01 UTC 2021 I: Submitting 12K b2/charliecloud_0.21-1_armhf.buildinfo.asc Sun Jul 11 14:48:02 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Jul 11 14:48:02 UTC 2021 I: Done submitting .buildinfo files. Sun Jul 11 14:48:02 UTC 2021 I: Removing signed charliecloud_0.21-1_armhf.buildinfo.asc files: removed './b1/charliecloud_0.21-1_armhf.buildinfo.asc' removed './b2/charliecloud_0.21-1_armhf.buildinfo.asc'