Sun Aug 22 11:20:43 UTC 2021 I: starting to build bmon/bullseye/armhf on jenkins on '2021-08-22 11:20' Sun Aug 22 11:20:43 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_25/5261/console.log Sun Aug 22 11:20:43 UTC 2021 I: Downloading source for bullseye/bmon=1:4.0-7 --2021-08-22 11:20:43-- http://cdn-fastly.deb.debian.org/debian/pool/main/b/bmon/bmon_4.0-7.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1806 (1.8K) Saving to: ‘bmon_4.0-7.dsc’ 0K . 100% 142M=0s 2021-08-22 11:20:43 (142 MB/s) - ‘bmon_4.0-7.dsc’ saved [1806/1806] Sun Aug 22 11:20:43 UTC 2021 I: bmon_4.0-7.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: bmon Binary: bmon Architecture: any Version: 1:4.0-7 Maintainer: Patrick Matthäi Homepage: http://www.infradead.org/~tgr/bmon/ Standards-Version: 4.5.1 Build-Depends: debhelper-compat (= 13), libconfuse-dev, libnl-3-dev [linux-any], libnl-route-3-dev [linux-any], libncurses5-dev, librrd-dev [linux-any kfreebsd-any], pkg-config Package-List: bmon deb net optional arch=any Checksums-Sha1: 4dfe30bcc2c85ee2f43d1f863d7580e301e81473 51856 bmon_4.0.orig.tar.xz 45bc95fdb2a38973b945bf973b1bb8e837682984 4456 bmon_4.0-7.debian.tar.xz Checksums-Sha256: 2775524050091409d3805394786b0e5b8a41e71276a123b27186409b99bad957 51856 bmon_4.0.orig.tar.xz dcd1014048d59d470cbbbd6b42616f332d7ded98f6d2ffd552435540ca6b4f19 4456 bmon_4.0-7.debian.tar.xz Files: 676d9845adc29599a9123e060221f1f0 51856 bmon_4.0.orig.tar.xz 9de6b72ab69bb3e3dbc4e60e6c8a7515 4456 bmon_4.0-7.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEWKA9xYJCWk3IuQ4TEtmwSpDL2OQFAl+2ev4ACgkQEtmwSpDL 2ORBxQ//Z3+sim643pKMjv1WQyKh2c8Rwu+jBo0x1We9dmoytQC/UTRrRp2r+O6X XPbC3b1jyXXPnBQA3pqw3+EzIAA3sgxlSvegHHzs5QC/9RAurHC4RvH+/r4gFJzq uain8wbyNGZyefTx2otOomCUDDpxiZ6eVQyR8wXFqZPwPrc/e6y2Fuq8krBLTLh2 oK+ZkUlv60beuk8ukP4phZ9eSeE9TA17WLBEuVgyTdmh54a4VvxFkL8uuu9cp3Ey po09ysPdvX89cLGM7IZCKk4xKAqmgVc3E1MgbxP72tI0AFqdGTHa16sOl18Ht8bS D3kvGed3hlmWOy3yIs2h5n1l6JdrM8+zmSlFHmpTIx9oHesmNPaGA+dO1xfFPcPJ MxgsWFeKoHydrqPmLykYMjqkxAwk7g4XFp92nqqCt6VGc+rudNLJCTEGTBRxq98L /lJxLNoOtHBRKepo0J/QOoRvLYndyPgCJlPbzKzsDqoDNCvudJWoGe8LWyW6Yq11 j3cdHJRS77yDXX94rQXDYJSHu9+1jPkM8JKlnSMfGd0iQnJSQS6kN3qe8gS4PhH8 1X9JoQ7KKvA+2JEaYT5P+BclVhh4XRs+/kV79tmg82z/Y7dpbLduTpBcMbc+afva 0vpdO9fn6oVDwCppCq0Gj/Q4cl+fRQZZO4KAHwjrao7/sGvLGHU= =tH8G -----END PGP SIGNATURE----- Sun Aug 22 11:20:43 UTC 2021 I: Checking whether the package is not for us Sun Aug 22 11:20:43 UTC 2021 I: Starting 1st build on remote node virt32c-armhf-rb.debian.net. Sun Aug 22 11:20:43 UTC 2021 I: Preparing to do remote build '1' on virt32c-armhf-rb.debian.net. Sun Aug 22 11:23:16 UTC 2021 I: Deleting $TMPDIR on virt32c-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Aug 21 23:20:50 -12 2021 I: pbuilder-time-stamp: 1629631250 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [bmon_4.0-7.dsc] I: copying [./bmon_4.0.orig.tar.xz] I: copying [./bmon_4.0-7.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.SaGh7Pid/trustedkeys.kbx': General error gpgv: Signature made Thu Nov 19 02:02:38 2020 -12 gpgv: using RSA key 58A03DC582425A4DC8B90E1312D9B04A90CBD8E4 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./bmon_4.0-7.dsc dpkg-source: info: extracting bmon in bmon-4.0 dpkg-source: info: unpacking bmon_4.0.orig.tar.xz dpkg-source: info: unpacking bmon_4.0-7.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 01-bsd-ftbfs.diff dpkg-source: info: applying 02-cross-build.diff I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/12003/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='11338579c02d49b7869fe76df24ab825' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='12003' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.Q4kZDGzfyf/pbuilderrc_E0Ad --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.Q4kZDGzfyf/b1 --logfile b1/build.log bmon_4.0-7.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux virt32c 5.10.0-8-armmp-lpae #1 SMP Debian 5.10.46-4 (2021-08-03) armv7l GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Aug 4 08:25 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Jul 28 07:09 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Jul 28 07:09 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Jul 28 07:09 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Jul 28 07:09 more -rwsr-xr-x 1 root root 34400 Jul 28 07:09 mount -rwxr-xr-x 1 root root 9824 Jul 28 07:09 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 08:25 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 20 21:25 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Jul 28 07:09 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 2021 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Jul 28 07:09 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Jul 28 07:09 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/12003/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libconfuse-dev, libnl-3-dev, libnl-route-3-dev, libncurses5-dev, librrd-dev, pkg-config dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libconfuse-dev; however: Package libconfuse-dev is not installed. pbuilder-satisfydepends-dummy depends on libnl-3-dev; however: Package libnl-3-dev is not installed. pbuilder-satisfydepends-dummy depends on libnl-route-3-dev; however: Package libnl-route-3-dev is not installed. pbuilder-satisfydepends-dummy depends on libncurses5-dev; however: Package libncurses5-dev is not installed. pbuilder-satisfydepends-dummy depends on librrd-dev; however: Package librrd-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} fontconfig{a} fontconfig-config{a} fonts-dejavu-core{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libbsd0{a} libcairo2{a} libconfuse-common{a} libconfuse-dev{a} libconfuse2{a} libdatrie1{a} libdbi1{a} libdebhelper-perl{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libfontconfig1{a} libfreetype6{a} libfribidi0{a} libglib2.0-0{a} libgraphite2-3{a} libharfbuzz0b{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libmd0{a} libncurses-dev{a} libncurses5-dev{a} libncurses6{a} libnl-3-200{a} libnl-3-dev{a} libnl-route-3-200{a} libnl-route-3-dev{a} libpango-1.0-0{a} libpangocairo-1.0-0{a} libpangoft2-1.0-0{a} libpipeline1{a} libpixman-1-0{a} libpng16-16{a} librrd-dev{a} librrd8{a} libsigsegv2{a} libsub-override-perl{a} libthai-data{a} libthai0{a} libtool{a} libuchardet0{a} libx11-6{a} libx11-data{a} libxau6{a} libxcb-render0{a} libxcb-shm0{a} libxcb1{a} libxdmcp6{a} libxext6{a} libxml2{a} libxrender1{a} m4{a} man-db{a} pkg-config{a} po-debconf{a} sensible-utils{a} ucf{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libconfuse-doc libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 77 newly installed, 0 to remove and 0 not upgraded. Need to get 28.3 MB of archives. After unpacking 86.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-8 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf ucf all 3.0043 [74.0 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf libexpat1 armhf 2.2.10-2 [76.3 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libbrotli1 armhf 1.0.9-2+b2 [262 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf libpng16-16 armhf 1.6.37-3 [277 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf libfreetype6 armhf 2.10.4+dfsg-1 [357 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf fonts-dejavu-core all 2.37-2 [1069 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf fontconfig-config all 2.13.1-4.2 [281 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf libfontconfig1 armhf 2.13.1-4.2 [329 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf fontconfig armhf 2.13.1-4.2 [415 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf libmd0 armhf 1.0.3-3 [27.4 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf libbsd0 armhf 0.11.3-1 [103 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf libpixman-1-0 armhf 0.40.0-1 [466 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf libxau6 armhf 1:1.0.9-1 [19.0 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf libxdmcp6 armhf 1:1.1.2-3 [24.9 kB] Get: 46 http://deb.debian.org/debian bullseye/main armhf libxcb1 armhf 1.14-3 [136 kB] Get: 47 http://deb.debian.org/debian bullseye/main armhf libx11-data all 2:1.7.2-1 [311 kB] Get: 48 http://deb.debian.org/debian bullseye/main armhf libx11-6 armhf 2:1.7.2-1 [713 kB] Get: 49 http://deb.debian.org/debian bullseye/main armhf libxcb-render0 armhf 1.14-3 [110 kB] Get: 50 http://deb.debian.org/debian bullseye/main armhf libxcb-shm0 armhf 1.14-3 [101 kB] Get: 51 http://deb.debian.org/debian bullseye/main armhf libxext6 armhf 2:1.3.3-1.1 [47.8 kB] Get: 52 http://deb.debian.org/debian bullseye/main armhf libxrender1 armhf 1:0.9.10-1 [29.9 kB] Get: 53 http://deb.debian.org/debian bullseye/main armhf libcairo2 armhf 1.16.0-5 [615 kB] Get: 54 http://deb.debian.org/debian bullseye/main armhf libconfuse-common all 3.3-2 [13.3 kB] Get: 55 http://deb.debian.org/debian bullseye/main armhf libconfuse2 armhf 3.3-2 [29.1 kB] Get: 56 http://deb.debian.org/debian bullseye/main armhf libconfuse-dev armhf 3.3-2 [38.5 kB] Get: 57 http://deb.debian.org/debian bullseye/main armhf libdatrie1 armhf 0.2.13-1 [39.4 kB] Get: 58 http://deb.debian.org/debian bullseye/main armhf libdbi1 armhf 0.9.0-6 [24.2 kB] Get: 59 http://deb.debian.org/debian bullseye/main armhf libfribidi0 armhf 1.0.8-2 [62.9 kB] Get: 60 http://deb.debian.org/debian bullseye/main armhf libglib2.0-0 armhf 2.66.8-1 [1206 kB] Get: 61 http://deb.debian.org/debian bullseye/main armhf libgraphite2-3 armhf 1.3.14-1 [70.5 kB] Get: 62 http://deb.debian.org/debian bullseye/main armhf libharfbuzz0b armhf 2.7.4-1 [1427 kB] Get: 63 http://deb.debian.org/debian bullseye/main armhf libncurses6 armhf 6.2+20201114-2 [80.5 kB] Get: 64 http://deb.debian.org/debian bullseye/main armhf libncurses-dev armhf 6.2+20201114-2 [308 kB] Get: 65 http://deb.debian.org/debian bullseye/main armhf libncurses5-dev armhf 6.2+20201114-2 [936 B] Get: 66 http://deb.debian.org/debian bullseye/main armhf libnl-3-200 armhf 3.4.0-1+b1 [55.5 kB] Get: 67 http://deb.debian.org/debian bullseye/main armhf libnl-3-dev armhf 3.4.0-1+b1 [97.1 kB] Get: 68 http://deb.debian.org/debian bullseye/main armhf libnl-route-3-200 armhf 3.4.0-1+b1 [136 kB] Get: 69 http://deb.debian.org/debian bullseye/main armhf libnl-route-3-dev armhf 3.4.0-1+b1 [160 kB] Get: 70 http://deb.debian.org/debian bullseye/main armhf libthai-data all 0.1.28-3 [170 kB] Get: 71 http://deb.debian.org/debian bullseye/main armhf libthai0 armhf 0.1.28-3 [50.9 kB] Get: 72 http://deb.debian.org/debian bullseye/main armhf libpango-1.0-0 armhf 1.46.2-3 [173 kB] Get: 73 http://deb.debian.org/debian bullseye/main armhf libpangoft2-1.0-0 armhf 1.46.2-3 [56.1 kB] Get: 74 http://deb.debian.org/debian bullseye/main armhf libpangocairo-1.0-0 armhf 1.46.2-3 [46.8 kB] Get: 75 http://deb.debian.org/debian bullseye/main armhf librrd8 armhf 1.7.2-3+b7 [235 kB] Get: 76 http://deb.debian.org/debian bullseye/main armhf librrd-dev armhf 1.7.2-3+b7 [265 kB] Get: 77 http://deb.debian.org/debian bullseye/main armhf pkg-config armhf 0.29.2-1 [62.4 kB] Fetched 28.3 MB in 5s (5505 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_armhf.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../01-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../03-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../07-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package ucf. Preparing to unpack .../10-ucf_3.0043_all.deb ... Moving old data out of the way Unpacking ucf (3.0043) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../17-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../18-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../19-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../20-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../21-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../24-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../26-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../27-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../32-libexpat1_2.2.10-2_armhf.deb ... Unpacking libexpat1:armhf (2.2.10-2) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../33-libbrotli1_1.0.9-2+b2_armhf.deb ... Unpacking libbrotli1:armhf (1.0.9-2+b2) ... Selecting previously unselected package libpng16-16:armhf. Preparing to unpack .../34-libpng16-16_1.6.37-3_armhf.deb ... Unpacking libpng16-16:armhf (1.6.37-3) ... Selecting previously unselected package libfreetype6:armhf. Preparing to unpack .../35-libfreetype6_2.10.4+dfsg-1_armhf.deb ... Unpacking libfreetype6:armhf (2.10.4+dfsg-1) ... Selecting previously unselected package fonts-dejavu-core. Preparing to unpack .../36-fonts-dejavu-core_2.37-2_all.deb ... Unpacking fonts-dejavu-core (2.37-2) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../37-fontconfig-config_2.13.1-4.2_all.deb ... Unpacking fontconfig-config (2.13.1-4.2) ... Selecting previously unselected package libfontconfig1:armhf. Preparing to unpack .../38-libfontconfig1_2.13.1-4.2_armhf.deb ... Unpacking libfontconfig1:armhf (2.13.1-4.2) ... Selecting previously unselected package fontconfig. Preparing to unpack .../39-fontconfig_2.13.1-4.2_armhf.deb ... Unpacking fontconfig (2.13.1-4.2) ... Selecting previously unselected package libmd0:armhf. Preparing to unpack .../40-libmd0_1.0.3-3_armhf.deb ... Unpacking libmd0:armhf (1.0.3-3) ... Selecting previously unselected package libbsd0:armhf. Preparing to unpack .../41-libbsd0_0.11.3-1_armhf.deb ... Unpacking libbsd0:armhf (0.11.3-1) ... Selecting previously unselected package libpixman-1-0:armhf. Preparing to unpack .../42-libpixman-1-0_0.40.0-1_armhf.deb ... Unpacking libpixman-1-0:armhf (0.40.0-1) ... Selecting previously unselected package libxau6:armhf. Preparing to unpack .../43-libxau6_1%3a1.0.9-1_armhf.deb ... Unpacking libxau6:armhf (1:1.0.9-1) ... Selecting previously unselected package libxdmcp6:armhf. Preparing to unpack .../44-libxdmcp6_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp6:armhf (1:1.1.2-3) ... Selecting previously unselected package libxcb1:armhf. Preparing to unpack .../45-libxcb1_1.14-3_armhf.deb ... Unpacking libxcb1:armhf (1.14-3) ... Selecting previously unselected package libx11-data. Preparing to unpack .../46-libx11-data_2%3a1.7.2-1_all.deb ... Unpacking libx11-data (2:1.7.2-1) ... Selecting previously unselected package libx11-6:armhf. Preparing to unpack .../47-libx11-6_2%3a1.7.2-1_armhf.deb ... Unpacking libx11-6:armhf (2:1.7.2-1) ... Selecting previously unselected package libxcb-render0:armhf. Preparing to unpack .../48-libxcb-render0_1.14-3_armhf.deb ... Unpacking libxcb-render0:armhf (1.14-3) ... Selecting previously unselected package libxcb-shm0:armhf. Preparing to unpack .../49-libxcb-shm0_1.14-3_armhf.deb ... Unpacking libxcb-shm0:armhf (1.14-3) ... Selecting previously unselected package libxext6:armhf. Preparing to unpack .../50-libxext6_2%3a1.3.3-1.1_armhf.deb ... Unpacking libxext6:armhf (2:1.3.3-1.1) ... Selecting previously unselected package libxrender1:armhf. Preparing to unpack .../51-libxrender1_1%3a0.9.10-1_armhf.deb ... Unpacking libxrender1:armhf (1:0.9.10-1) ... Selecting previously unselected package libcairo2:armhf. Preparing to unpack .../52-libcairo2_1.16.0-5_armhf.deb ... Unpacking libcairo2:armhf (1.16.0-5) ... Selecting previously unselected package libconfuse-common. Preparing to unpack .../53-libconfuse-common_3.3-2_all.deb ... Unpacking libconfuse-common (3.3-2) ... Selecting previously unselected package libconfuse2:armhf. Preparing to unpack .../54-libconfuse2_3.3-2_armhf.deb ... Unpacking libconfuse2:armhf (3.3-2) ... Selecting previously unselected package libconfuse-dev:armhf. Preparing to unpack .../55-libconfuse-dev_3.3-2_armhf.deb ... Unpacking libconfuse-dev:armhf (3.3-2) ... Selecting previously unselected package libdatrie1:armhf. Preparing to unpack .../56-libdatrie1_0.2.13-1_armhf.deb ... Unpacking libdatrie1:armhf (0.2.13-1) ... Selecting previously unselected package libdbi1:armhf. Preparing to unpack .../57-libdbi1_0.9.0-6_armhf.deb ... Unpacking libdbi1:armhf (0.9.0-6) ... Selecting previously unselected package libfribidi0:armhf. Preparing to unpack .../58-libfribidi0_1.0.8-2_armhf.deb ... Unpacking libfribidi0:armhf (1.0.8-2) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../59-libglib2.0-0_2.66.8-1_armhf.deb ... Unpacking libglib2.0-0:armhf (2.66.8-1) ... Selecting previously unselected package libgraphite2-3:armhf. Preparing to unpack .../60-libgraphite2-3_1.3.14-1_armhf.deb ... Unpacking libgraphite2-3:armhf (1.3.14-1) ... Selecting previously unselected package libharfbuzz0b:armhf. Preparing to unpack .../61-libharfbuzz0b_2.7.4-1_armhf.deb ... Unpacking libharfbuzz0b:armhf (2.7.4-1) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../62-libncurses6_6.2+20201114-2_armhf.deb ... Unpacking libncurses6:armhf (6.2+20201114-2) ... Selecting previously unselected package libncurses-dev:armhf. Preparing to unpack .../63-libncurses-dev_6.2+20201114-2_armhf.deb ... Unpacking libncurses-dev:armhf (6.2+20201114-2) ... Selecting previously unselected package libncurses5-dev:armhf. Preparing to unpack .../64-libncurses5-dev_6.2+20201114-2_armhf.deb ... Unpacking libncurses5-dev:armhf (6.2+20201114-2) ... Selecting previously unselected package libnl-3-200:armhf. Preparing to unpack .../65-libnl-3-200_3.4.0-1+b1_armhf.deb ... Unpacking libnl-3-200:armhf (3.4.0-1+b1) ... Selecting previously unselected package libnl-3-dev:armhf. Preparing to unpack .../66-libnl-3-dev_3.4.0-1+b1_armhf.deb ... Unpacking libnl-3-dev:armhf (3.4.0-1+b1) ... Selecting previously unselected package libnl-route-3-200:armhf. Preparing to unpack .../67-libnl-route-3-200_3.4.0-1+b1_armhf.deb ... Unpacking libnl-route-3-200:armhf (3.4.0-1+b1) ... Selecting previously unselected package libnl-route-3-dev:armhf. Preparing to unpack .../68-libnl-route-3-dev_3.4.0-1+b1_armhf.deb ... Unpacking libnl-route-3-dev:armhf (3.4.0-1+b1) ... Selecting previously unselected package libthai-data. Preparing to unpack .../69-libthai-data_0.1.28-3_all.deb ... Unpacking libthai-data (0.1.28-3) ... Selecting previously unselected package libthai0:armhf. Preparing to unpack .../70-libthai0_0.1.28-3_armhf.deb ... Unpacking libthai0:armhf (0.1.28-3) ... Selecting previously unselected package libpango-1.0-0:armhf. Preparing to unpack .../71-libpango-1.0-0_1.46.2-3_armhf.deb ... Unpacking libpango-1.0-0:armhf (1.46.2-3) ... Selecting previously unselected package libpangoft2-1.0-0:armhf. Preparing to unpack .../72-libpangoft2-1.0-0_1.46.2-3_armhf.deb ... Unpacking libpangoft2-1.0-0:armhf (1.46.2-3) ... Selecting previously unselected package libpangocairo-1.0-0:armhf. Preparing to unpack .../73-libpangocairo-1.0-0_1.46.2-3_armhf.deb ... Unpacking libpangocairo-1.0-0:armhf (1.46.2-3) ... Selecting previously unselected package librrd8:armhf. Preparing to unpack .../74-librrd8_1.7.2-3+b7_armhf.deb ... Unpacking librrd8:armhf (1.7.2-3+b7) ... Selecting previously unselected package librrd-dev:armhf. Preparing to unpack .../75-librrd-dev_1.7.2-3+b7_armhf.deb ... Unpacking librrd-dev:armhf (1.7.2-3+b7) ... Selecting previously unselected package pkg-config. Preparing to unpack .../76-pkg-config_0.29.2-1_armhf.deb ... Unpacking pkg-config (0.29.2-1) ... Setting up libexpat1:armhf (2.2.10-2) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up libgraphite2-3:armhf (1.3.14-1) ... Setting up libpixman-1-0:armhf (0.40.0-1) ... Setting up libxau6:armhf (1:1.0.9-1) ... Setting up libdbi1:armhf (0.9.0-6) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libdatrie1:armhf (0.2.13-1) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libglib2.0-0:armhf (2.66.8-1) ... No schema files found: doing nothing. Setting up libdebhelper-perl (13.3.4) ... Setting up libbrotli1:armhf (1.0.9-2+b2) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libx11-data (2:1.7.2-1) ... Setting up libncurses6:armhf (6.2+20201114-2) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up libfribidi0:armhf (1.0.8-2) ... Setting up libpng16-16:armhf (1.6.37-3) ... Setting up autopoint (0.21-4) ... Setting up pkg-config (0.29.2-1) ... Setting up fonts-dejavu-core (2.37-2) ... Setting up libmd0:armhf (1.0.3-3) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libconfuse-common (3.3-2) ... Setting up libnl-3-200:armhf (3.4.0-1+b1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libthai-data (0.1.28-3) ... Setting up libconfuse2:armhf (3.3-2) ... Setting up libbsd0:armhf (0.11.3-1) ... Setting up libelf1:armhf (0.183-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up libxdmcp6:armhf (1:1.1.2-3) ... Setting up libncurses-dev:armhf (6.2+20201114-2) ... Setting up libxcb1:armhf (1.14-3) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libxcb-render0:armhf (1.14-3) ... Setting up m4 (1.4.18-5) ... Setting up libxcb-shm0:armhf (1.14-3) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libnl-route-3-200:armhf (3.4.0-1+b1) ... Setting up libconfuse-dev:armhf (3.3-2) ... Setting up libthai0:armhf (0.1.28-3) ... Setting up libfreetype6:armhf (2.10.4+dfsg-1) ... Setting up ucf (3.0043) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up libnl-3-dev:armhf (3.4.0-1+b1) ... Setting up groff-base (1.22.4-6) ... Setting up libncurses5-dev:armhf (6.2+20201114-2) ... Setting up libx11-6:armhf (2:1.7.2-1) ... Setting up libharfbuzz0b:armhf (2.7.4-1) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libxrender1:armhf (1:0.9.10-1) ... Setting up fontconfig-config (2.13.1-4.2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libxext6:armhf (2:1.3.3-1.1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up libnl-route-3-dev:armhf (3.4.0-1+b1) ... Setting up libfontconfig1:armhf (2.13.1-4.2) ... Setting up fontconfig (2.13.1-4.2) ... Regenerating fonts cache... done. Setting up libpango-1.0-0:armhf (1.46.2-3) ... Setting up debhelper (13.3.4) ... Setting up libcairo2:armhf (1.16.0-5) ... Setting up libpangoft2-1.0-0:armhf (1.46.2-3) ... Setting up libpangocairo-1.0-0:armhf (1.46.2-3) ... Setting up librrd8:armhf (1.7.2-3+b7) ... Setting up librrd-dev:armhf (1.7.2-3+b7) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/bmon-4.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../bmon_4.0-7_source.changes dpkg-buildpackage: info: source package bmon dpkg-buildpackage: info: source version 1:4.0-7 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Patrick Matthäi dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf configure.ac:35: installing 'build-aux/compile' configure.ac:29: installing 'build-aux/config.guess' configure.ac:29: installing 'build-aux/config.sub' configure.ac:32: installing 'build-aux/install-sh' configure.ac:32: installing 'build-aux/missing' src/Makefile.am: installing 'build-aux/depcomp' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/bmon-4.0' dh_auto_configure -- --disable-silent-rules ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking target system type... arm-unknown-linux-gnueabihf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for library containing strerror... none required checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) none checking for gcc option to accept ISO C99... none needed checking for gcc option to accept ISO Standard C... (cached) none needed checking how to run the C preprocessor... gcc -E checking whether make sets $(MAKE)... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking whether time.h and sys/time.h may both be included... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for size_t... yes checking return type of signal handlers... void checking for pid_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking ncurses/ncurses.h usability... no checking ncurses/ncurses.h presence... no checking for ncurses/ncurses.h... no checking ncurses.h usability... yes checking ncurses.h presence... yes checking for ncurses.h... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking dirent.h usability... yes checking dirent.h presence... yes checking for dirent.h... yes checking sys/utsname.h usability... yes checking sys/utsname.h presence... yes checking for sys/utsname.h... yes checking sys/sockio.h usability... no checking sys/sockio.h presence... no checking for sys/sockio.h... no checking netinet6/in6.h usability... no checking netinet6/in6.h presence... no checking for netinet6/in6.h... no checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking sysctl/ioctl.h usability... no checking sysctl/ioctl.h presence... no checking for sysctl/ioctl.h... no checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking for suseconds_t... yes checking for atexit... yes checking for clock_gettime... yes checking for memset... yes checking for pow... no checking for socket... yes checking for strcasecmp... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strncasecmp... yes checking for strstr... yes checking for strtol... yes checking for uname... yes checking for getdate... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for NcursesW wide-character library... yes checking for working ncursesw/curses.h... yes checking for working ncursesw.h... no checking for working ncurses.h... yes checking for libconfuse... yes checking for libnl-3.0... yes checking for libnl-route-3.0... yes checking for pow in -lm... yes checking for clock_gettime in -lrt... yes checking for initscr in -lncurses... yes checking for redrawwin in -lncurses... yes checking for use_default_colors in -lncurses... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating man/Makefile config.status: creating examples/Makefile config.status: creating include/bmon/defs.h config.status: executing depfiles commands make[1]: Leaving directory '/build/bmon-4.0' dh_auto_build make -j3 make[1]: Entering directory '/build/bmon-4.0' Making all in src make[2]: Entering directory '/build/bmon-4.0/src' gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-utils.o `test -f 'utils.c' || echo './'`utils.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-unit.o `test -f 'unit.c' || echo './'`unit.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-conf.o `test -f 'conf.c' || echo './'`conf.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-input.o `test -f 'input.c' || echo './'`input.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-output.o `test -f 'output.c' || echo './'`output.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-group.o `test -f 'group.c' || echo './'`group.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-element.o `test -f 'element.c' || echo './'`element.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-attr.o `test -f 'attr.c' || echo './'`attr.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-element_cfg.o `test -f 'element_cfg.c' || echo './'`element_cfg.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-history.o `test -f 'history.c' || echo './'`history.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-graph.o `test -f 'graph.c' || echo './'`graph.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-bmon.o `test -f 'bmon.c' || echo './'`bmon.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-module.o `test -f 'module.c' || echo './'`module.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_netlink.o `test -f 'in_netlink.c' || echo './'`in_netlink.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_null.o `test -f 'in_null.c' || echo './'`in_null.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_dummy.o `test -f 'in_dummy.c' || echo './'`in_dummy.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_proc.o `test -f 'in_proc.c' || echo './'`in_proc.c in_netlink.c: In function 'handle_tc_obj': in_netlink.c:558:37: warning: ' (' directive output may be truncated writing 2 bytes into a region of size between 0 and 31 [-Wformat-truncation=] 558 | snprintf(name, sizeof(name), "%s %s (%s)", | ^~ In file included from /usr/include/stdio.h:867, from ../include/bmon/config.h:36, from ../include/bmon/bmon.h:29, from in_netlink.c:26: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 5 or more bytes (assuming 36) into a destination of size 32 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 68 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_sysctl.o `test -f 'in_sysctl.c' || echo './'`in_sysctl.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-out_null.o `test -f 'out_null.c' || echo './'`out_null.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-out_format.o `test -f 'out_format.c' || echo './'`out_format.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-out_ascii.o `test -f 'out_ascii.c' || echo './'`out_ascii.c gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-out_curses.o `test -f 'out_curses.c' || echo './'`out_curses.c gcc -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/build/bmon-4.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o bmon bmon-utils.o bmon-unit.o bmon-conf.o bmon-input.o bmon-output.o bmon-group.o bmon-element.o bmon-attr.o bmon-element_cfg.o bmon-history.o bmon-graph.o bmon-bmon.o bmon-module.o bmon-in_netlink.o bmon-in_null.o bmon-in_dummy.o bmon-in_proc.o bmon-in_sysctl.o bmon-out_null.o bmon-out_format.o bmon-out_ascii.o bmon-out_curses.o -lncursesw -lconfuse -lnl-3 -lnl-route-3 -lnl-3 -lrt -lm make[2]: Leaving directory '/build/bmon-4.0/src' Making all in man make[2]: Entering directory '/build/bmon-4.0/man' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/bmon-4.0/man' Making all in include make[2]: Entering directory '/build/bmon-4.0/include' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/bmon-4.0/include' Making all in examples make[2]: Entering directory '/build/bmon-4.0/examples' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/bmon-4.0/examples' make[2]: Entering directory '/build/bmon-4.0' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/bmon-4.0' make[1]: Leaving directory '/build/bmon-4.0' dh_auto_test make -j3 check VERBOSE=1 make[1]: Entering directory '/build/bmon-4.0' Making check in src make[2]: Entering directory '/build/bmon-4.0/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/bmon-4.0/src' Making check in man make[2]: Entering directory '/build/bmon-4.0/man' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/bmon-4.0/man' Making check in include make[2]: Entering directory '/build/bmon-4.0/include' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/bmon-4.0/include' Making check in examples make[2]: Entering directory '/build/bmon-4.0/examples' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/bmon-4.0/examples' make[2]: Entering directory '/build/bmon-4.0' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/build/bmon-4.0' make[1]: Leaving directory '/build/bmon-4.0' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j3 install DESTDIR=/build/bmon-4.0/debian/bmon AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/bmon-4.0' Making install in src make[2]: Entering directory '/build/bmon-4.0/src' make[3]: Entering directory '/build/bmon-4.0/src' /bin/mkdir -p '/build/bmon-4.0/debian/bmon/usr/bin' make[3]: Nothing to be done for 'install-data-am'. /usr/bin/install -c bmon '/build/bmon-4.0/debian/bmon/usr/bin' make[3]: Leaving directory '/build/bmon-4.0/src' make[2]: Leaving directory '/build/bmon-4.0/src' Making install in man make[2]: Entering directory '/build/bmon-4.0/man' make[3]: Entering directory '/build/bmon-4.0/man' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/bmon-4.0/debian/bmon/usr/share/man/man8' /usr/bin/install -c -m 644 bmon.8 '/build/bmon-4.0/debian/bmon/usr/share/man/man8' make[3]: Leaving directory '/build/bmon-4.0/man' make[2]: Leaving directory '/build/bmon-4.0/man' Making install in include make[2]: Entering directory '/build/bmon-4.0/include' make[3]: Entering directory '/build/bmon-4.0/include' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/bmon-4.0/include' make[2]: Leaving directory '/build/bmon-4.0/include' Making install in examples make[2]: Entering directory '/build/bmon-4.0/examples' make[3]: Entering directory '/build/bmon-4.0/examples' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/bmon-4.0/debian/bmon/usr/share/doc/bmon/examples' /usr/bin/install -c -m 644 bmon.conf '/build/bmon-4.0/debian/bmon/usr/share/doc/bmon/examples' make[3]: Leaving directory '/build/bmon-4.0/examples' make[2]: Leaving directory '/build/bmon-4.0/examples' make[2]: Entering directory '/build/bmon-4.0' make[3]: Entering directory '/build/bmon-4.0' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/bmon-4.0' make[2]: Leaving directory '/build/bmon-4.0' make[1]: Leaving directory '/build/bmon-4.0' dh_install dh_installdocs debian/rules override_dh_installchangelogs make[1]: Entering directory '/build/bmon-4.0' dh_installchangelogs NEWS make[1]: Leaving directory '/build/bmon-4.0' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'bmon-dbgsym' in '../bmon-dbgsym_4.0-7_armhf.deb'. dpkg-deb: building package 'bmon' in '../bmon_4.0-7_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../bmon_4.0-7_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/12003 and its subdirectories I: Current time: Sat Aug 21 23:23:10 -12 2021 I: pbuilder-time-stamp: 1629631390 Sun Aug 22 11:23:18 UTC 2021 I: 1st build successful. Starting 2nd build on remote node jtx1c-armhf-rb.debian.net. Sun Aug 22 11:23:18 UTC 2021 I: Preparing to do remote build '2' on jtx1c-armhf-rb.debian.net. Sun Aug 22 11:24:39 UTC 2021 I: Deleting $TMPDIR on jtx1c-armhf-rb.debian.net. Sun Aug 22 11:24:41 UTC 2021 I: bmon_4.0-7_armhf.changes: Format: 1.8 Date: Thu, 19 Nov 2020 14:56:32 +0100 Source: bmon Binary: bmon bmon-dbgsym Architecture: armhf Version: 1:4.0-7 Distribution: unstable Urgency: medium Maintainer: Patrick Matthäi Changed-By: Patrick Matthäi Description: bmon - portable bandwidth monitor and rate estimator Changes: bmon (1:4.0-7) unstable; urgency=medium . * Adjust lintian overrides. * Bump Standards-Version to 4.5.1. * Bump debhelper-compat to level 13. * Update debian/watch file standard to version 4. Checksums-Sha1: e3b6e77e9104d67850c5a3f8a34365fdd834f9fe 115956 bmon-dbgsym_4.0-7_armhf.deb 43d2cfd0065d9b90ff3651c36724a6de81439e81 6046 bmon_4.0-7_armhf.buildinfo 7251ffcfa96ec7c16f456c146421434d67d991de 42684 bmon_4.0-7_armhf.deb Checksums-Sha256: bea7aed04540b511cd3e9765fe4e99f6785475dddd2938ca42da1a5147d11d07 115956 bmon-dbgsym_4.0-7_armhf.deb 07a9025c0553ab4a285af4a244b699d51ff84b0d775f51628e78324e62536962 6046 bmon_4.0-7_armhf.buildinfo a4ba4af06f0b6102b23b3f6f9c13e77860f11e8ec573b5ea0b6b64765508d534 42684 bmon_4.0-7_armhf.deb Files: 51550f0806b856fb1385bacece75253d 115956 debug optional bmon-dbgsym_4.0-7_armhf.deb 0854ea41d444c604a9cf25c8c3a9fa86 6046 net optional bmon_4.0-7_armhf.buildinfo ada09ca92a28bddd0218d985e8a013e4 42684 net optional bmon_4.0-7_armhf.deb Sun Aug 22 11:24:42 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.Q4kZDGzfyf/bmon_4.0-7.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.Q4kZDGzfyf/bmon_4.0-7.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.Q4kZDGzfyf/bmon_4.0-7.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.Q4kZDGzfyf/b1/bmon_4.0-7_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.Q4kZDGzfyf/b2/bmon_4.0-7_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.415s) 0.415s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.033s) 0.033s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sun Aug 22 11:24:45 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Sun Aug 22 11:24:45 UTC 2021 I: bmon from bullseye built successfully and reproducibly on armhf. Sun Aug 22 11:24:46 UTC 2021 I: Submitting .buildinfo files to external archives: Sun Aug 22 11:24:46 UTC 2021 I: Submitting 8.0K b1/bmon_4.0-7_armhf.buildinfo.asc Sun Aug 22 11:24:48 UTC 2021 I: Submitting 8.0K b2/bmon_4.0-7_armhf.buildinfo.asc Sun Aug 22 11:24:49 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Aug 22 11:24:49 UTC 2021 I: Done submitting .buildinfo files. Sun Aug 22 11:24:49 UTC 2021 I: Removing signed bmon_4.0-7_armhf.buildinfo.asc files: removed './b1/bmon_4.0-7_armhf.buildinfo.asc' removed './b2/bmon_4.0-7_armhf.buildinfo.asc'