Sun Jul 25 05:28:25 UTC 2021 I: starting to build python-morph/bullseye/arm64 on jenkins on '2021-07-25 05:28' Sun Jul 25 05:28:25 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_20/15/console.log Sun Jul 25 05:28:25 UTC 2021 I: Downloading source for bullseye/python-morph=0.1.3-2 --2021-07-25 05:28:25-- http://cdn-fastly.deb.debian.org/debian/pool/main/p/python-morph/python-morph_0.1.3-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2088 (2.0K) Saving to: ‘python-morph_0.1.3-2.dsc’ 0K .. 100% 74.7M=0s 2021-07-25 05:28:25 (74.7 MB/s) - ‘python-morph_0.1.3-2.dsc’ saved [2088/2088] Sun Jul 25 05:28:25 UTC 2021 I: python-morph_0.1.3-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: python-morph Binary: python3-morph Architecture: all Version: 0.1.3-2 Maintainer: Debian OpenStack Uploaders: Thomas Goirand , Homepage: http://github.com/metagriffin/morph Standards-Version: 4.1.3 Vcs-Browser: https://salsa.debian.org/openstack-team/python/python-morph Vcs-Git: https://salsa.debian.org/openstack-team/python/python-morph.git Build-Depends: debhelper-compat (= 11), dh-python, openstack-pkg-tools (>= 80~), python3-all, python3-setuptools Build-Depends-Indep: python3-coverage, python3-nose Package-List: python3-morph deb python optional arch=all Checksums-Sha1: 835f17e630c198eba3e786d2028ba762c4f35fc8 19132 python-morph_0.1.3.orig.tar.xz 9969794a676b5d5f1c38fc935e65a37ab3a76173 2812 python-morph_0.1.3-2.debian.tar.xz Checksums-Sha256: 83157aa0de829b36bac2d4bf7b47327b59547fd794c3284e1e48405942effa86 19132 python-morph_0.1.3.orig.tar.xz 6c3ee429c43967079635e518e2a52604851870a90ca7911d8c2c7000a3473bf8 2812 python-morph_0.1.3-2.debian.tar.xz Files: 9f6a2d490d39a21e1e6172fe8c300056 19132 python-morph_0.1.3.orig.tar.xz fb93f474287857959f3f7b6ba8923145 2812 python-morph_0.1.3-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEoLGp81CJVhMOekJc1BatFaxrQ/4FAl5LqNEACgkQ1BatFaxr Q/62hA//c+UAr4gXjxHa5K9sbV7TUrvzi7oVdLD3X0BaTHDS4tCXpI8Wd31JKqoF RfK5L7d10sfq7bw1U6b74RHSxCGNItV2iLzE203cStTap7wB3hbyTNXZMjoU6TcK WZS9dKRveBWFtAVkN88nwH9CSnyGwxL4Z6ZDGNDqnsx3BS97qILTnq/mGU2x7wrC AXsD1nSf3LAIxTGh8Aj/e6dD+jOGVyiKSiL0hJFMBWK5Bzop4JOOoa8l7j/Bqz2Q 0MrjyD62512tZnz6r0GIf/epZUafOMhz+a0fkFlK2phxMeQ2tdaeLfxMLnXRvW+l Hx5aa3O8nkDzvA3/k2CkoxePhqRFwkyBjcr1at4clDJO+QrqJDG4f6d9vl/V1ITk iLqeA5YkjDN7YRVSMZthiyDnNsckDIGmM0qpczu6esgXzIutV+Wk/UJnQtOFtKL4 o/j+/MymLCrDtdivpiqfbsk/OJDU/us7tS5eY5qn0Vxxi32/J3r6de+8dIDNURDE MVU3Wxsfz+2dPYLwgV+pMTgBp1hDw2df/GjTj8GQIZfn9fmfi1MjGBx/MxVLDpTI IuE0L2lSkW38hG3BALapuIwc+J9iiSBoMPI7tq8Df5ZdORBVf74CR9tEE7BDlT0N lHQt0POfEnp6zQCQraUzftjIirDBFTrsY5WrRCC9xGT7yWhWxGg= =ZSDR -----END PGP SIGNATURE----- Sun Jul 25 05:28:25 UTC 2021 I: Checking whether the package is not for us Sun Jul 25 05:28:25 UTC 2021 I: Starting 1st build on remote node codethink13-arm64.debian.net. Sun Jul 25 05:28:25 UTC 2021 I: Preparing to do remote build '1' on codethink13-arm64.debian.net. Sun Jul 25 05:29:48 UTC 2021 I: Deleting $TMPDIR on codethink13-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Aug 26 23:51:29 -12 2022 I: pbuilder-time-stamp: 1661601089 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [python-morph_0.1.3-2.dsc] I: copying [./python-morph_0.1.3.orig.tar.xz] I: copying [./python-morph_0.1.3-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.o5vQofLl/trustedkeys.kbx': General error gpgv: Signature made Mon Feb 17 21:05:21 2020 -12 gpgv: using RSA key A0B1A9F3508956130E7A425CD416AD15AC6B43FE gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./python-morph_0.1.3-2.dsc dpkg-source: info: extracting python-morph in python-morph-0.1.3 dpkg-source: info: unpacking python-morph_0.1.3.orig.tar.xz dpkg-source: info: unpacking python-morph_0.1.3-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying remove-broken-test.patch dpkg-source: info: applying remove-failing-test_xform_combined.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/15535/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8' DISTRIBUTION='' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='15535' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.YY5QKhSK23/pbuilderrc_GK3X --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.YY5QKhSK23/b1 --logfile b1/build.log python-morph_0.1.3-2.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink13-arm64 4.15.0-151-generic #157-Ubuntu SMP Fri Jul 9 21:03:48 UTC 2021 aarch64 GNU/Linux I: ls -l /bin total 5252 -rwxr-xr-x 1 root root 1282512 Jun 21 2021 bash -rwxr-xr-x 3 root root 34808 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 14264 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 39832 Sep 22 2020 cat -rwxr-xr-x 1 root root 64512 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 60368 Sep 22 2020 chmod -rwxr-xr-x 1 root root 64528 Sep 22 2020 chown -rwxr-xr-x 1 root root 138896 Sep 22 2020 cp -rwxr-xr-x 1 root root 129544 Dec 10 2020 dash -rwxr-xr-x 1 root root 101384 Sep 22 2020 date -rwxr-xr-x 1 root root 80984 Sep 22 2020 dd -rwxr-xr-x 1 root root 89824 Sep 22 2020 df -rwxr-xr-x 1 root root 143088 Sep 22 2020 dir -rwxr-xr-x 1 root root 76152 Feb 7 2021 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 35632 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 31512 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 64856 Feb 7 2021 findmnt -rwsr-xr-x 1 root root 34824 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 178400 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 93744 Mar 2 2021 gzip -rwxr-xr-x 1 root root 18440 Nov 6 2019 hostname -rwxr-xr-x 1 root root 68720 Sep 22 2020 ln -rwxr-xr-x 1 root root 52720 Feb 7 2020 login -rwxr-xr-x 1 root root 143088 Sep 22 2020 ls -rwxr-xr-x 1 root root 161960 Feb 7 2021 lsblk -rwxr-xr-x 1 root root 85200 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 68744 Sep 22 2020 mknod -rwxr-xr-x 1 root root 43976 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 51368 Feb 7 2021 more -rwsr-xr-x 1 root root 51360 Feb 7 2021 mount -rwxr-xr-x 1 root root 14496 Feb 7 2021 mountpoint -rwxr-xr-x 1 root root 134808 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 2021 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 35720 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 2021 rbash -> bash -rwxr-xr-x 1 root root 43872 Sep 22 2020 readlink -rwxr-xr-x 1 root root 68592 Sep 22 2020 rm -rwxr-xr-x 1 root root 43880 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 19208 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 114016 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 25 03:49 sh -> dash -rwxr-xr-x 1 root root 35656 Sep 22 2020 sleep -rwxr-xr-x 1 root root 72640 Sep 22 2020 stty -rwsr-xr-x 1 root root 67776 Feb 7 2021 su -rwxr-xr-x 1 root root 35672 Sep 22 2020 sync -rwxr-xr-x 1 root root 535768 Feb 16 2021 tar -rwxr-xr-x 1 root root 10568 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 89120 Sep 22 2020 touch -rwxr-xr-x 1 root root 31512 Sep 22 2020 true -rwxr-xr-x 1 root root 14264 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 30880 Feb 7 2021 umount -rwxr-xr-x 1 root root 35640 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 143088 Sep 22 2020 vdir -rwxr-xr-x 1 root root 59584 Feb 7 2021 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/15535/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 11), dh-python, openstack-pkg-tools (>= 80~), python3-all, python3-setuptools, python3-coverage, python3-nose dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 11); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on openstack-pkg-tools (>= 80~); however: Package openstack-pkg-tools is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. pbuilder-satisfydepends-dummy depends on python3-coverage; however: Package python3-coverage is not installed. pbuilder-satisfydepends-dummy depends on python3-nose; however: Package python3-nose is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} jq{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libjq1{a} libmagic-mgc{a} libmagic1{a} libmpdec3{a} libonig5{a} libpipeline1{a} libpython3-stdlib{a} libpython3.9-minimal{a} libpython3.9-stdlib{a} libreadline8{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} openssl{a} openstack-pkg-tools{a} po-debconf{a} python-pip-whl{a} python3{a} python3-all{a} python3-coverage{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3-nose{a} python3-pip{a} python3-pkg-resources{a} python3-setuptools{a} python3-wheel{a} python3.9{a} python3.9-minimal{a} readline-common{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: autopkgtest curl libarchive-cpio-perl libjs-jquery libjs-jquery-isonscreen libjs-jquery-tablesorter libjs-jquery-throttle-debounce libltdl-dev libmail-sendmail-perl lynx madison-lite pristine-tar python3-dev wget 0 packages upgraded, 60 newly installed, 0 to remove and 0 not upgraded. Need to get 28.2 MB of archives. After unpacking 100.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-7 [141 kB] Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB] Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB] Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB] Get: 6 http://deb.debian.org/debian bullseye/main arm64 libpython3.9-minimal arm64 3.9.2-1 [797 kB] Get: 7 http://deb.debian.org/debian bullseye/main arm64 libexpat1 arm64 2.2.10-2 [83.1 kB] Get: 8 http://deb.debian.org/debian bullseye/main arm64 python3.9-minimal arm64 3.9.2-1 [1884 kB] Get: 9 http://deb.debian.org/debian bullseye/main arm64 python3-minimal arm64 3.9.2-3 [38.2 kB] Get: 10 http://deb.debian.org/debian bullseye/main arm64 media-types all 4.0.0 [30.3 kB] Get: 11 http://deb.debian.org/debian bullseye/main arm64 libmpdec3 arm64 2.5.1-1 [84.4 kB] Get: 12 http://deb.debian.org/debian bullseye/main arm64 readline-common all 8.1-1 [73.7 kB] Get: 13 http://deb.debian.org/debian bullseye/main arm64 libreadline8 arm64 8.1-1 [160 kB] Get: 14 http://deb.debian.org/debian bullseye/main arm64 libpython3.9-stdlib arm64 3.9.2-1 [1658 kB] Get: 15 http://deb.debian.org/debian bullseye/main arm64 python3.9 arm64 3.9.2-1 [466 kB] Get: 16 http://deb.debian.org/debian bullseye/main arm64 libpython3-stdlib arm64 3.9.2-3 [21.4 kB] Get: 17 http://deb.debian.org/debian bullseye/main arm64 python3 arm64 3.9.2-3 [37.9 kB] Get: 18 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB] Get: 19 http://deb.debian.org/debian bullseye/main arm64 openssl arm64 1.1.1k-1 [829 kB] Get: 20 http://deb.debian.org/debian bullseye/main arm64 ca-certificates all 20210119 [158 kB] Get: 21 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB] Get: 22 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB] Get: 23 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB] Get: 24 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB] Get: 25 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB] Get: 26 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB] Get: 27 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB] Get: 28 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 29 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB] Get: 30 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB] Get: 31 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB] Get: 32 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB] Get: 33 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 34 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 35 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB] Get: 36 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 37 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 38 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB] Get: 39 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB] Get: 40 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB] Get: 41 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB] Get: 42 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB] Get: 43 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 44 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 45 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB] Get: 46 http://deb.debian.org/debian bullseye/main arm64 python3-lib2to3 all 3.9.2-1 [77.8 kB] Get: 47 http://deb.debian.org/debian bullseye/main arm64 python3-distutils all 3.9.2-1 [143 kB] Get: 48 http://deb.debian.org/debian bullseye/main arm64 dh-python all 4.20201102+nmu1 [99.4 kB] Get: 49 http://deb.debian.org/debian bullseye/main arm64 libonig5 arm64 6.9.6-1.1 [176 kB] Get: 50 http://deb.debian.org/debian bullseye/main arm64 libjq1 arm64 1.6-2.1 [121 kB] Get: 51 http://deb.debian.org/debian bullseye/main arm64 jq arm64 1.6-2.1 [64.5 kB] Get: 52 http://deb.debian.org/debian bullseye/main arm64 python3-pkg-resources all 52.0.0-4 [190 kB] Get: 53 http://deb.debian.org/debian bullseye/main arm64 python3-setuptools all 52.0.0-4 [366 kB] Get: 54 http://deb.debian.org/debian bullseye/main arm64 python3-wheel all 0.34.2-1 [24.0 kB] Get: 55 http://deb.debian.org/debian bullseye/main arm64 python-pip-whl all 20.3.4-4 [1948 kB] Get: 56 http://deb.debian.org/debian bullseye/main arm64 python3-pip all 20.3.4-4 [337 kB] Get: 57 http://deb.debian.org/debian bullseye/main arm64 openstack-pkg-tools all 117 [102 kB] Get: 58 http://deb.debian.org/debian bullseye/main arm64 python3-all arm64 3.9.2-3 [1056 B] Get: 59 http://deb.debian.org/debian bullseye/main arm64 python3-coverage arm64 5.1+dfsg.1-2+b2 [169 kB] Get: 60 http://deb.debian.org/debian bullseye/main arm64 python3-nose all 1.3.7-7 [133 kB] Fetched 28.2 MB in 3s (10.4 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../0-bsdextrautils_2.36.1-7_arm64.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../1-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../2-groff-base_1.22.4-6_arm64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../3-libpipeline1_1.5.3-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../4-man-db_2.9.4-2_arm64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package libpython3.9-minimal:arm64. Preparing to unpack .../5-libpython3.9-minimal_3.9.2-1_arm64.deb ... Unpacking libpython3.9-minimal:arm64 (3.9.2-1) ... Selecting previously unselected package libexpat1:arm64. Preparing to unpack .../6-libexpat1_2.2.10-2_arm64.deb ... Unpacking libexpat1:arm64 (2.2.10-2) ... Selecting previously unselected package python3.9-minimal. Preparing to unpack .../7-python3.9-minimal_3.9.2-1_arm64.deb ... Unpacking python3.9-minimal (3.9.2-1) ... Setting up libpython3.9-minimal:arm64 (3.9.2-1) ... Setting up libexpat1:arm64 (2.2.10-2) ... Setting up python3.9-minimal (3.9.2-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20513 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.9.2-3_arm64.deb ... Unpacking python3-minimal (3.9.2-3) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_4.0.0_all.deb ... Unpacking media-types (4.0.0) ... Selecting previously unselected package libmpdec3:arm64. Preparing to unpack .../2-libmpdec3_2.5.1-1_arm64.deb ... Unpacking libmpdec3:arm64 (2.5.1-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) ... Selecting previously unselected package libreadline8:arm64. Preparing to unpack .../4-libreadline8_8.1-1_arm64.deb ... Unpacking libreadline8:arm64 (8.1-1) ... Selecting previously unselected package libpython3.9-stdlib:arm64. Preparing to unpack .../5-libpython3.9-stdlib_3.9.2-1_arm64.deb ... Unpacking libpython3.9-stdlib:arm64 (3.9.2-1) ... Selecting previously unselected package python3.9. Preparing to unpack .../6-python3.9_3.9.2-1_arm64.deb ... Unpacking python3.9 (3.9.2-1) ... Selecting previously unselected package libpython3-stdlib:arm64. Preparing to unpack .../7-libpython3-stdlib_3.9.2-3_arm64.deb ... Unpacking libpython3-stdlib:arm64 (3.9.2-3) ... Setting up python3-minimal (3.9.2-3) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20934 files and directories currently installed.) Preparing to unpack .../00-python3_3.9.2-3_arm64.deb ... Unpacking python3 (3.9.2-3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package openssl. Preparing to unpack .../02-openssl_1.1.1k-1_arm64.deb ... Unpacking openssl (1.1.1k-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../03-ca-certificates_20210119_all.deb ... Unpacking ca-certificates (20210119) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.39-3_arm64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../05-libmagic1_1%3a5.39-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.39-3_arm64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.21-4_arm64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:arm64. Preparing to unpack .../08-libsigsegv2_2.13-1_arm64.deb ... Unpacking libsigsegv2:arm64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../09-m4_1.4.18-5_arm64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../10-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../11-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../12-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../13-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../14-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../15-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../16-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../17-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../18-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../21-libelf1_0.183-1_arm64.deb ... Unpacking libelf1:arm64 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.13+20210201-1_arm64.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:arm64. Preparing to unpack .../23-libicu67_67.1-7_arm64.deb ... Unpacking libicu67:arm64 (67.1-7) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.10+dfsg-6.7_arm64.deb ... Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-4_arm64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../29-python3-lib2to3_3.9.2-1_all.deb ... Unpacking python3-lib2to3 (3.9.2-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../30-python3-distutils_3.9.2-1_all.deb ... Unpacking python3-distutils (3.9.2-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../31-dh-python_4.20201102+nmu1_all.deb ... Unpacking dh-python (4.20201102+nmu1) ... Selecting previously unselected package libonig5:arm64. Preparing to unpack .../32-libonig5_6.9.6-1.1_arm64.deb ... Unpacking libonig5:arm64 (6.9.6-1.1) ... Selecting previously unselected package libjq1:arm64. Preparing to unpack .../33-libjq1_1.6-2.1_arm64.deb ... Unpacking libjq1:arm64 (1.6-2.1) ... Selecting previously unselected package jq. Preparing to unpack .../34-jq_1.6-2.1_arm64.deb ... Unpacking jq (1.6-2.1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../35-python3-pkg-resources_52.0.0-4_all.deb ... Unpacking python3-pkg-resources (52.0.0-4) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../36-python3-setuptools_52.0.0-4_all.deb ... Unpacking python3-setuptools (52.0.0-4) ... Selecting previously unselected package python3-wheel. Preparing to unpack .../37-python3-wheel_0.34.2-1_all.deb ... Unpacking python3-wheel (0.34.2-1) ... Selecting previously unselected package python-pip-whl. Preparing to unpack .../38-python-pip-whl_20.3.4-4_all.deb ... Unpacking python-pip-whl (20.3.4-4) ... Selecting previously unselected package python3-pip. Preparing to unpack .../39-python3-pip_20.3.4-4_all.deb ... Unpacking python3-pip (20.3.4-4) ... Selecting previously unselected package openstack-pkg-tools. Preparing to unpack .../40-openstack-pkg-tools_117_all.deb ... Unpacking openstack-pkg-tools (117) ... Selecting previously unselected package python3-all. Preparing to unpack .../41-python3-all_3.9.2-3_arm64.deb ... Unpacking python3-all (3.9.2-3) ... Selecting previously unselected package python3-coverage. Preparing to unpack .../42-python3-coverage_5.1+dfsg.1-2+b2_arm64.deb ... Unpacking python3-coverage (5.1+dfsg.1-2+b2) ... Selecting previously unselected package python3-nose. Preparing to unpack .../43-python3-nose_1.3.7-7_all.deb ... Unpacking python3-nose (1.3.7-7) ... Setting up media-types (4.0.0) ... Setting up libpipeline1:arm64 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:arm64 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:arm64 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:arm64 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libmpdec3:arm64 (2.5.1-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up openssl (1.1.1k-1) ... Setting up libelf1:arm64 (0.183-1) ... Setting up readline-common (8.1-1) ... Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ... Setting up libonig5:arm64 (6.9.6-1.1) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libjq1:arm64 (1.6-2.1) ... Setting up libreadline8:arm64 (8.1-1) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 129 added, 0 removed; done. Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up jq (1.6-2.1) ... Setting up python-pip-whl (20.3.4-4) ... Setting up libpython3.9-stdlib:arm64 (3.9.2-1) ... Setting up libpython3-stdlib:arm64 (3.9.2-3) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up python3.9 (3.9.2-1) ... Setting up debhelper (13.3.4) ... Setting up python3 (3.9.2-3) ... Setting up python3-wheel (0.34.2-1) ... Setting up python3-lib2to3 (3.9.2-1) ... Setting up python3-pkg-resources (52.0.0-4) ... Setting up python3-distutils (3.9.2-1) ... Setting up dh-python (4.20201102+nmu1) ... Setting up python3-setuptools (52.0.0-4) ... Setting up python3-all (3.9.2-3) ... Setting up python3-coverage (5.1+dfsg.1-2+b2) ... Setting up python3-nose (1.3.7-7) ... Setting up python3-pip (20.3.4-4) ... Setting up openstack-pkg-tools (117) ... Processing triggers for libc-bin (2.31-13) ... Processing triggers for ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/python-morph-0.1.3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../python-morph_0.1.3-2_source.changes dpkg-buildpackage: info: source package python-morph dpkg-buildpackage: info: source version 0.1.3-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Thomas Goirand dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 dpkg-source: info: using options from python-morph-0.1.3/debian/source/options: --extend-diff-ignore=^[^/]*[.]egg-info/ fakeroot debian/rules clean make: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions dh clean --buildsystem=python_distutils --with python3 debian/rules override_dh_auto_clean make[1]: Entering directory '/build/python-morph-0.1.3' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions python3 setup.py clean running clean make[1]: Leaving directory '/build/python-morph-0.1.3' dh_autoreconf_clean -O--buildsystem=python_distutils dh_clean -O--buildsystem=python_distutils debian/rules build make: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions dh build --buildsystem=python_distutils --with python3 dh_update_autotools_config -O--buildsystem=python_distutils dh_autoreconf -O--buildsystem=python_distutils dh_auto_configure -O--buildsystem=python_distutils dh_auto_configure: warning: Please use the third-party "pybuild" build system instead of python-distutils dh_auto_configure: warning: This feature will be removed in compat 12. debian/rules override_dh_auto_build make[1]: Entering directory '/build/python-morph-0.1.3' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions echo "Do nothing..." Do nothing... make[1]: Leaving directory '/build/python-morph-0.1.3' debian/rules override_dh_auto_test make[1]: Entering directory '/build/python-morph-0.1.3' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions echo "Do nothing..." Do nothing... make[1]: Leaving directory '/build/python-morph-0.1.3' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary make: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions dh binary --buildsystem=python_distutils --with python3 dh_testroot -O--buildsystem=python_distutils dh_prep -O--buildsystem=python_distutils debian/rules override_dh_auto_install make[1]: Entering directory '/build/python-morph-0.1.3' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions pkgos-dh_auto_install --no-py2 + PKGOS_USE_PY2=yes + PKGOS_USE_PY3=yes + PKGOS_IN_TMP=no + PKGOS_USE_PY2=no + shift + dpkg-parsechangelog -SSource + SRC_PKG_NAME=python-morph + echo python-morph + sed s/python-// + PY_MODULE_NAME=morph + [ no = yes ] + [ yes = yes ] + py3versions -vr + PYTHON3S=3.9 + [ no = yes ] + [ yes = yes ] + [ no = yes ] + TARGET_DIR=python3-morph + pwd + python3.9 setup.py install --install-layout=deb --root /build/python-morph-0.1.3/debian/python3-morph running install running build running build_py creating build creating build/lib creating build/lib/morph copying morph/test.py -> build/lib/morph copying morph/__init__.py -> build/lib/morph running egg_info creating morph.egg-info writing morph.egg-info/PKG-INFO writing dependency_links to morph.egg-info/dependency_links.txt writing top-level names to morph.egg-info/top_level.txt writing manifest file 'morph.egg-info/SOURCES.txt' reading manifest file 'morph.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' writing manifest file 'morph.egg-info/SOURCES.txt' running install_lib creating /build/python-morph-0.1.3/debian/python3-morph creating /build/python-morph-0.1.3/debian/python3-morph/usr creating /build/python-morph-0.1.3/debian/python3-morph/usr/lib creating /build/python-morph-0.1.3/debian/python3-morph/usr/lib/python3 creating /build/python-morph-0.1.3/debian/python3-morph/usr/lib/python3/dist-packages creating /build/python-morph-0.1.3/debian/python3-morph/usr/lib/python3/dist-packages/morph copying build/lib/morph/__init__.py -> /build/python-morph-0.1.3/debian/python3-morph/usr/lib/python3/dist-packages/morph copying build/lib/morph/test.py -> /build/python-morph-0.1.3/debian/python3-morph/usr/lib/python3/dist-packages/morph byte-compiling /build/python-morph-0.1.3/debian/python3-morph/usr/lib/python3/dist-packages/morph/__init__.py to __init__.cpython-39.pyc byte-compiling /build/python-morph-0.1.3/debian/python3-morph/usr/lib/python3/dist-packages/morph/test.py to test.cpython-39.pyc running install_egg_info Copying morph.egg-info to /build/python-morph-0.1.3/debian/python3-morph/usr/lib/python3/dist-packages/morph-0.1.3.egg-info Skipping SOURCES.txt running install_scripts + pwd + rm -rf /build/python-morph-0.1.3/debian/python*/usr/lib/python*/dist-packages/*.pth + pwd + rm -rf /build/python-morph-0.1.3/debian/tmp/usr/lib/python*/dist-packages/*.pth + pwd + [ -d /build/python-morph-0.1.3/debian/python-morph/usr/bin ] set -e ; for pyvers in 3.9; do \ PYTHONPATH=. PYTHON=$pyvers python$pyvers setup.py test ; \ done running test WARNING: Testing via this command is deprecated and will be removed in a future version. Users looking for a generic test entry point independent of test runner are encouraged to use tox. running egg_info writing morph.egg-info/PKG-INFO writing dependency_links to morph.egg-info/dependency_links.txt writing top-level names to morph.egg-info/top_level.txt reading manifest file 'morph.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' writing manifest file 'morph.egg-info/SOURCES.txt' running build_ext test_flatten (morph.test.TestMorph) ... ok test_isdict (morph.test.TestMorph) ... ok test_isseq (morph.test.TestMorph) ... ok test_isstr (morph.test.TestMorph) ... ok test_omit (morph.test.TestMorph) ... ok test_omit_object (morph.test.TestMorph) ... ok test_omit_tree (morph.test.TestMorph) ... ok test_pick (morph.test.TestMorph) ... ok test_pick_object (morph.test.TestMorph) ... ok test_pick_tree (morph.test.TestMorph) ... ok test_tobool (morph.test.TestMorph) ... ok test_tolist (morph.test.TestMorph) ... ok test_unflatten_fail (morph.test.TestMorph) ... ok test_unflatten_ok (morph.test.TestMorph) ... ok test_xform_dict (morph.test.TestMorph) ... ok test_xform_seq (morph.test.TestMorph) ... ok ---------------------------------------------------------------------- Ran 16 tests in 0.007s OK make[1]: Leaving directory '/build/python-morph-0.1.3' dh_installdocs -O--buildsystem=python_distutils debian/rules override_dh_installchangelogs make[1]: Entering directory '/build/python-morph-0.1.3' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions if [ -e /build/python-morph-0.1.3/debian/CHANGELOG ] ; then \ dh_installchangelogs /build/python-morph-0.1.3/debian/CHANGELOG ; \ else \ dh_installchangelogs ; \ fi make[1]: Leaving directory '/build/python-morph-0.1.3' dh_python3 -O--buildsystem=python_distutils debian/rules override_dh_installinit make[1]: Entering directory '/build/python-morph-0.1.3' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions # Create the init scripts and systemd unit files from the template set -e ; set -x ; for i in `ls -1 debian/*.init.in` ; do \ MYINIT=`echo $i | sed s/.init.in//` ; \ cp $i $MYINIT.init ; \ cat /usr/share/openstack-pkg-tools/init-script-template >>$MYINIT.init ; \ pkgos-gen-systemd-unit $i ; \ done + ls -1 debian/*.init.in ls: cannot access 'debian/*.init.in': No such file or directory # If there's a service.in file, use that one instead of the generated one set -e ; set -x ; for i in `ls -1 debian/*.service.in`; do \ MYPKG=`echo $i | sed s/.service.in//` ; \ cp $MYPKG.service.in $MYPKG.service ; \ done + ls -1 debian/*.service.in ls: cannot access 'debian/*.service.in': No such file or directory # Generate the systemd unit if there's no already existing .service.in set -e ; set -x ; for i in `ls debian/*.init.in` ; do \ MYINIT=`echo $i | sed s/.init.in/.service.in/` ; \ if ! [ -e $MYINIT ] ; then \ pkgos-gen-systemd-unit $i ; \ fi \ done + ls debian/*.init.in ls: cannot access 'debian/*.init.in': No such file or directory dh_installinit --error-handler=true make[1]: Leaving directory '/build/python-morph-0.1.3' debian/rules override_dh_installsystemd make[1]: Entering directory '/build/python-morph-0.1.3' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions # Create the init scripts and systemd unit files from the template set -e ; set -x ; for i in `ls -1 debian/*.init.in` ; do \ MYINIT=`echo $i | sed s/.init.in//` ; \ cp $i $MYINIT.init ; \ cat /usr/share/openstack-pkg-tools/init-script-template >>$MYINIT.init ; \ pkgos-gen-systemd-unit $i ; \ done + ls -1 debian/*.init.in ls: cannot access 'debian/*.init.in': No such file or directory # If there's a service.in file, use that one instead of the generated one set -e ; set -x ; for i in `ls -1 debian/*.service.in`; do \ MYPKG=`echo $i | sed s/.service.in//` ; \ cp $MYPKG.service.in $MYPKG.service ; \ done + ls -1 debian/*.service.in ls: cannot access 'debian/*.service.in': No such file or directory # Generate the systemd unit if there's no already existing .service.in set -e ; set -x ; for i in `ls debian/*.init.in` ; do \ MYINIT=`echo $i | sed s/.init.in/.service.in/` ; \ if ! [ -e $MYINIT ] ; then \ pkgos-gen-systemd-unit $i ; \ fi \ done + ls debian/*.init.in ls: cannot access 'debian/*.init.in': No such file or directory dh_installsystemd make[1]: Leaving directory '/build/python-morph-0.1.3' dh_perl -O--buildsystem=python_distutils dh_link -O--buildsystem=python_distutils dh_strip_nondeterminism -O--buildsystem=python_distutils dh_compress -O--buildsystem=python_distutils dh_fixperms -O--buildsystem=python_distutils dh_missing -O--buildsystem=python_distutils dh_installdeb -O--buildsystem=python_distutils debian/rules override_dh_gencontrol make[1]: Entering directory '/build/python-morph-0.1.3' make[1]: pyversions: No such file or directory py3versions: no X-Python3-Version in control file, using supported versions if dpkg-vendor --derives-from ubuntu ; then \ dh_gencontrol -- -T/build/python-morph-0.1.3/debian/ubuntu_control_vars ; \ else \ dh_gencontrol -- -T/build/python-morph-0.1.3/debian/debian_control_vars ; \ fi make[1]: Leaving directory '/build/python-morph-0.1.3' dh_md5sums -O--buildsystem=python_distutils dh_builddeb -O--buildsystem=python_distutils dpkg-deb: building package 'python3-morph' in '../python3-morph_0.1.3-2_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../python-morph_0.1.3-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-source: info: using options from python-morph-0.1.3/debian/source/options: --extend-diff-ignore=^[^/]*[.]egg-info/ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/15535 and its subdirectories I: Current time: Fri Aug 26 23:52:47 -12 2022 I: pbuilder-time-stamp: 1661601167 Sun Jul 25 05:29:49 UTC 2021 I: 1st build successful. Starting 2nd build on remote node codethink16-arm64.debian.net. Sun Jul 25 05:29:49 UTC 2021 I: Preparing to do remote build '2' on codethink16-arm64.debian.net. Sun Jul 25 05:30:58 UTC 2021 I: Deleting $TMPDIR on codethink16-arm64.debian.net. Sun Jul 25 05:30:58 UTC 2021 I: python-morph_0.1.3-2_arm64.changes: Format: 1.8 Date: Tue, 18 Feb 2020 09:58:44 +0100 Source: python-morph Binary: python3-morph Architecture: all Version: 0.1.3-2 Distribution: unstable Urgency: medium Maintainer: Debian OpenStack Changed-By: Thomas Goirand Description: python3-morph - collection of routines to help identify and morph objects - Pytho Closes: 950045 Changes: python-morph (0.1.3-2) unstable; urgency=medium . [ Ondřej Nový ] * Running wrap-and-sort -bast * d/copyright: Use https protocol in Format field * Use debhelper-compat instead of debian/compat. . [ Thomas Goirand ] * Add remove-failing-test_xform_combined.patch (Closes: #950045). Checksums-Sha1: d0598285eac99387aa3a3474e1939a1e1a20bab0 5497 python-morph_0.1.3-2_arm64.buildinfo 117596ab0a9a21a4fd8b5dd1b80f1b0e7ff9d86a 10272 python3-morph_0.1.3-2_all.deb Checksums-Sha256: ad1760ffec22fe0c65a49df70120efb333f6ca6dd6ad497575529656ad435dcd 5497 python-morph_0.1.3-2_arm64.buildinfo f0ae703d2fc63a67a8597bbe6b2ade8ab275077ed18721f35cbc45d7cab0847c 10272 python3-morph_0.1.3-2_all.deb Files: 6556383f996ddd21cd0e435df467762f 5497 python optional python-morph_0.1.3-2_arm64.buildinfo 7eb2d36bfa294af6a5e5dd25203f9a8a 10272 python optional python3-morph_0.1.3-2_all.deb Sun Jul 25 05:31:00 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.YY5QKhSK23/python-morph_0.1.3-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.YY5QKhSK23/python-morph_0.1.3-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.YY5QKhSK23/python-morph_0.1.3-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.YY5QKhSK23/b1/python-morph_0.1.3-2_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.YY5QKhSK23/b2/python-morph_0.1.3-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.228s) 0.228s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.014s) 0.014s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sun Jul 25 05:31:01 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Sun Jul 25 05:31:01 UTC 2021 I: python-morph from bullseye built successfully and reproducibly on arm64. Sun Jul 25 05:31:02 UTC 2021 I: Submitting .buildinfo files to external archives: Sun Jul 25 05:31:02 UTC 2021 I: Submitting 8.0K b1/python-morph_0.1.3-2_arm64.buildinfo.asc Sun Jul 25 05:31:04 UTC 2021 I: Submitting 8.0K b2/python-morph_0.1.3-2_arm64.buildinfo.asc Sun Jul 25 05:31:05 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Jul 25 05:31:05 UTC 2021 I: Done submitting .buildinfo files. Sun Jul 25 05:31:05 UTC 2021 I: Removing signed python-morph_0.1.3-2_arm64.buildinfo.asc files: removed './b1/python-morph_0.1.3-2_arm64.buildinfo.asc' removed './b2/python-morph_0.1.3-2_arm64.buildinfo.asc'