Mon Aug 23 01:11:38 UTC 2021  I: starting to build openexr-viewers/bullseye/arm64 on jenkins on '2021-08-23 01:11'
Mon Aug 23 01:11:38 UTC 2021  I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_29/14290/console.log
Mon Aug 23 01:11:38 UTC 2021  I: Downloading source for bullseye/openexr-viewers=2.3.0-1
--2021-08-23 01:11:38--  http://cdn-fastly.deb.debian.org/debian/pool/main/o/openexr-viewers/openexr-viewers_2.3.0-1.dsc
Connecting to 78.137.99.97:3128... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1848 (1.8K)
Saving to: ‘openexr-viewers_2.3.0-1.dsc’

     0K .                                                     100%  132M=0s

2021-08-23 01:11:38 (132 MB/s) - ‘openexr-viewers_2.3.0-1.dsc’ saved [1848/1848]

Mon Aug 23 01:11:38 UTC 2021  I: openexr-viewers_2.3.0-1.dsc
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 3.0 (quilt)
Source: openexr-viewers
Binary: openexr-viewers
Architecture: any
Version: 2.3.0-1
Maintainer: Pino Toscano <pino@debian.org>
Homepage: https://www.openexr.com
Standards-Version: 4.5.0
Build-Depends: debhelper-compat (= 12), pkg-config, libopenexr-dev (>= 1.6), libfltk1.3-dev, libgl1-mesa-dev, zlib1g-dev
Package-List:
 openexr-viewers deb graphics optional arch=any
Checksums-Sha1:
 074f14cca382fea6ce5846b31b0c32063f89ac2f 532154 openexr-viewers_2.3.0.orig.tar.gz
 098718416aa8f8b52b1c90b190775878cb3c05ed 4704 openexr-viewers_2.3.0-1.debian.tar.xz
Checksums-Sha256:
 9b8a6abebfda17586ef7e5fea9ba8e87a3cc688676681ef306b445c3f4034175 532154 openexr-viewers_2.3.0.orig.tar.gz
 26dc141a5e03c7404c3a527f31b8ac80fcab25e61efb27448f4494de368f3ead 4704 openexr-viewers_2.3.0-1.debian.tar.xz
Files:
 15561e0e79da1218b7cc124bdd13ef3e 532154 openexr-viewers_2.3.0.orig.tar.gz
 d1dbae8c4787e5fbce2cc9360cc275ef 4704 openexr-viewers_2.3.0-1.debian.tar.xz

-----BEGIN PGP SIGNATURE-----
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=pGoE
-----END PGP SIGNATURE-----
Mon Aug 23 01:11:38 UTC 2021  I: Checking whether the package is not for us
Mon Aug 23 01:11:38 UTC 2021  I: Starting 1st build on remote node codethink16-arm64.debian.net.
Mon Aug 23 01:11:38 UTC 2021  I: Preparing to do remote build '1' on codethink16-arm64.debian.net.
Mon Aug 23 01:12:48 UTC 2021  I: Deleting $TMPDIR on codethink16-arm64.debian.net.
I: pbuilder: network access will be disabled during build
I: Current time: Sun Aug 22 13:11:41 -12 2021
I: pbuilder-time-stamp: 1629681101
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz]
I: copying local configuration
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: policy-rc.d already exists
I: Copying source file
I: copying [openexr-viewers_2.3.0-1.dsc]
I: copying [./openexr-viewers_2.3.0.orig.tar.gz]
I: copying [./openexr-viewers_2.3.0-1.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/tmp/dpkg-verify-sig.HrD7MCvx/trustedkeys.kbx': General error
gpgv: Signature made Sat Apr  4 21:14:54 2020 -12
gpgv:                using RSA key 5F2A9FB82FA6C1E1077007072D191C8843B13F4D
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./openexr-viewers_2.3.0-1.dsc
dpkg-source: info: extracting openexr-viewers in openexr-viewers-2.3.0
dpkg-source: info: unpacking openexr-viewers_2.3.0.orig.tar.gz
dpkg-source: info: unpacking openexr-viewers_2.3.0-1.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying link_gl.diff
I: using fakeroot in build.
I: Installing the build-deps
I: user script /srv/workspace/pbuilder/1286/tmp/hooks/D02_print_environment starting
I: set
  BUILDDIR='/build'
  BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other'
  BUILDUSERNAME='pbuilder1'
  BUILD_ARCH='arm64'
  DEBIAN_FRONTEND='noninteractive'
  DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8'
  DISTRIBUTION=''
  HOME='/var/lib/jenkins'
  HOST_ARCH='arm64'
  IFS=' 	
  '
  LANG='C'
  LANGUAGE='en_US:en'
  LC_ALL='C'
  MAIL='/var/mail/root'
  OPTIND='1'
  PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games'
  PBCURRENTCOMMANDLINEOPERATION='build'
  PBUILDER_OPERATION='build'
  PBUILDER_PKGDATADIR='/usr/share/pbuilder'
  PBUILDER_PKGLIBDIR='/usr/lib/pbuilder'
  PBUILDER_SYSCONFDIR='/etc'
  PPID='1286'
  PS1='# '
  PS2='> '
  PS4='+ '
  PWD='/'
  SHELL='/bin/bash'
  SHLVL='2'
  SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.n2x8m4VPBu/pbuilderrc_Mhat --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.n2x8m4VPBu/b1 --logfile b1/build.log openexr-viewers_2.3.0-1.dsc'
  SUDO_GID='117'
  SUDO_UID='110'
  SUDO_USER='jenkins'
  TERM='unknown'
  TZ='/usr/share/zoneinfo/Etc/GMT+12'
  USER='root'
  USERNAME='root'
  _='/usr/bin/systemd-run'
  http_proxy='http://192.168.101.16:3128'
I: uname -a
  Linux codethink16-arm64 4.15.0-154-generic #161-Ubuntu SMP Fri Jul 30 13:01:15 UTC 2021 aarch64 GNU/Linux
I: ls -l /bin
  total 5252
  -rwxr-xr-x 1 root root 1282512 Aug  4 08:25 bash
  -rwxr-xr-x 3 root root   34808 Jul 20  2020 bunzip2
  -rwxr-xr-x 3 root root   34808 Jul 20  2020 bzcat
  lrwxrwxrwx 1 root root       6 Jul 20  2020 bzcmp -> bzdiff
  -rwxr-xr-x 1 root root    2225 Jul 20  2020 bzdiff
  lrwxrwxrwx 1 root root       6 Jul 20  2020 bzegrep -> bzgrep
  -rwxr-xr-x 1 root root    4877 Sep  4  2019 bzexe
  lrwxrwxrwx 1 root root       6 Jul 20  2020 bzfgrep -> bzgrep
  -rwxr-xr-x 1 root root    3775 Jul 20  2020 bzgrep
  -rwxr-xr-x 3 root root   34808 Jul 20  2020 bzip2
  -rwxr-xr-x 1 root root   14264 Jul 20  2020 bzip2recover
  lrwxrwxrwx 1 root root       6 Jul 20  2020 bzless -> bzmore
  -rwxr-xr-x 1 root root    1297 Jul 20  2020 bzmore
  -rwxr-xr-x 1 root root   39832 Sep 22  2020 cat
  -rwxr-xr-x 1 root root   64512 Sep 22  2020 chgrp
  -rwxr-xr-x 1 root root   60368 Sep 22  2020 chmod
  -rwxr-xr-x 1 root root   64528 Sep 22  2020 chown
  -rwxr-xr-x 1 root root  138896 Sep 22  2020 cp
  -rwxr-xr-x 1 root root  129544 Dec 10  2020 dash
  -rwxr-xr-x 1 root root  101384 Sep 22  2020 date
  -rwxr-xr-x 1 root root   80984 Sep 22  2020 dd
  -rwxr-xr-x 1 root root   89824 Sep 22  2020 df
  -rwxr-xr-x 1 root root  143088 Sep 22  2020 dir
  -rwxr-xr-x 1 root root   76152 Jul 28 07:09 dmesg
  lrwxrwxrwx 1 root root       8 Nov  6  2019 dnsdomainname -> hostname
  lrwxrwxrwx 1 root root       8 Nov  6  2019 domainname -> hostname
  -rwxr-xr-x 1 root root   35632 Sep 22  2020 echo
  -rwxr-xr-x 1 root root      28 Nov  9  2020 egrep
  -rwxr-xr-x 1 root root   31512 Sep 22  2020 false
  -rwxr-xr-x 1 root root      28 Nov  9  2020 fgrep
  -rwxr-xr-x 1 root root   64856 Jul 28 07:09 findmnt
  -rwsr-xr-x 1 root root   34824 Feb 26 04:12 fusermount
  -rwxr-xr-x 1 root root  178400 Nov  9  2020 grep
  -rwxr-xr-x 2 root root    2346 Mar  2 11:30 gunzip
  -rwxr-xr-x 1 root root    6376 Mar  2 11:30 gzexe
  -rwxr-xr-x 1 root root   93744 Mar  2 11:30 gzip
  -rwxr-xr-x 1 root root   18440 Nov  6  2019 hostname
  -rwxr-xr-x 1 root root   68720 Sep 22  2020 ln
  -rwxr-xr-x 1 root root   52720 Feb  7  2020 login
  -rwxr-xr-x 1 root root  143088 Sep 22  2020 ls
  -rwxr-xr-x 1 root root  161960 Jul 28 07:09 lsblk
  -rwxr-xr-x 1 root root   85200 Sep 22  2020 mkdir
  -rwxr-xr-x 1 root root   68744 Sep 22  2020 mknod
  -rwxr-xr-x 1 root root   43976 Sep 22  2020 mktemp
  -rwxr-xr-x 1 root root   51368 Jul 28 07:09 more
  -rwsr-xr-x 1 root root   51360 Jul 28 07:09 mount
  -rwxr-xr-x 1 root root   14496 Jul 28 07:09 mountpoint
  -rwxr-xr-x 1 root root  134808 Sep 22  2020 mv
  lrwxrwxrwx 1 root root       8 Nov  6  2019 nisdomainname -> hostname
  lrwxrwxrwx 1 root root      14 Apr 18 03:38 pidof -> /sbin/killall5
  -rwxr-xr-x 1 root root   35720 Sep 22  2020 pwd
  lrwxrwxrwx 1 root root       4 Aug  4 08:25 rbash -> bash
  -rwxr-xr-x 1 root root   43872 Sep 22  2020 readlink
  -rwxr-xr-x 1 root root   68592 Sep 22  2020 rm
  -rwxr-xr-x 1 root root   43880 Sep 22  2020 rmdir
  -rwxr-xr-x 1 root root   19208 Sep 27  2020 run-parts
  -rwxr-xr-x 1 root root  114016 Dec 22  2018 sed
  lrwxrwxrwx 1 root root       4 Aug 20 21:25 sh -> dash
  -rwxr-xr-x 1 root root   35656 Sep 22  2020 sleep
  -rwxr-xr-x 1 root root   72640 Sep 22  2020 stty
  -rwsr-xr-x 1 root root   67776 Jul 28 07:09 su
  -rwxr-xr-x 1 root root   35672 Sep 22  2020 sync
  -rwxr-xr-x 1 root root  535768 Feb 16  2021 tar
  -rwxr-xr-x 1 root root   10568 Sep 27  2020 tempfile
  -rwxr-xr-x 1 root root   89120 Sep 22  2020 touch
  -rwxr-xr-x 1 root root   31512 Sep 22  2020 true
  -rwxr-xr-x 1 root root   14264 Feb 26 04:12 ulockmgr_server
  -rwsr-xr-x 1 root root   30880 Jul 28 07:09 umount
  -rwxr-xr-x 1 root root   35640 Sep 22  2020 uname
  -rwxr-xr-x 2 root root    2346 Mar  2 11:30 uncompress
  -rwxr-xr-x 1 root root  143088 Sep 22  2020 vdir
  -rwxr-xr-x 1 root root   59584 Jul 28 07:09 wdctl
  lrwxrwxrwx 1 root root       8 Nov  6  2019 ypdomainname -> hostname
  -rwxr-xr-x 1 root root    1984 Mar  2 11:30 zcat
  -rwxr-xr-x 1 root root    1678 Mar  2 11:30 zcmp
  -rwxr-xr-x 1 root root    5880 Mar  2 11:30 zdiff
  -rwxr-xr-x 1 root root      29 Mar  2 11:30 zegrep
  -rwxr-xr-x 1 root root      29 Mar  2 11:30 zfgrep
  -rwxr-xr-x 1 root root    2081 Mar  2 11:30 zforce
  -rwxr-xr-x 1 root root    7585 Mar  2 11:30 zgrep
  -rwxr-xr-x 1 root root    2206 Mar  2 11:30 zless
  -rwxr-xr-x 1 root root    1842 Mar  2 11:30 zmore
  -rwxr-xr-x 1 root root    4553 Mar  2 11:30 znew
I: user script /srv/workspace/pbuilder/1286/tmp/hooks/D02_print_environment finished
 -> Attempting to satisfy build-dependencies
 -> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: arm64
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
 This package was created automatically by pbuilder to satisfy the
 build-dependencies of the package being currently built.
Depends: debhelper-compat (= 12), pkg-config, libopenexr-dev (>= 1.6), libfltk1.3-dev, libgl1-mesa-dev, zlib1g-dev
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19646 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
 pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however:
  Package debhelper-compat is not installed.
 pbuilder-satisfydepends-dummy depends on pkg-config; however:
  Package pkg-config is not installed.
 pbuilder-satisfydepends-dummy depends on libopenexr-dev (>= 1.6); however:
  Package libopenexr-dev is not installed.
 pbuilder-satisfydepends-dummy depends on libfltk1.3-dev; however:
  Package libfltk1.3-dev is not installed.
 pbuilder-satisfydepends-dummy depends on libgl1-mesa-dev; however:
  Package libgl1-mesa-dev is not installed.
 pbuilder-satisfydepends-dummy depends on zlib1g-dev; however:
  Package zlib1g-dev is not installed.

Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
The following NEW packages will be installed:
  autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} fontconfig-config{a} fonts-dejavu-core{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libbsd0{a} libcairo2{a} libdebhelper-perl{a} libdrm-amdgpu1{a} libdrm-common{a} libdrm-nouveau2{a} libdrm-radeon1{a} libdrm2{a} libedit2{a} libegl-dev{a} libegl-mesa0{a} libegl1{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libfltk-cairo1.3{a} libfltk-forms1.3{a} libfltk-gl1.3{a} libfltk-images1.3{a} libfltk1.3{a} libfltk1.3-dev{a} libfontconfig1{a} libfreetype6{a} libgbm1{a} libgl-dev{a} libgl1{a} libgl1-mesa-dev{a} libgl1-mesa-dri{a} libglapi-mesa{a} libgles-dev{a} libgles1{a} libgles2{a} libglib2.0-0{a} libglvnd-dev{a} libglvnd0{a} libglx-dev{a} libglx-mesa0{a} libglx0{a} libicu67{a} libilmbase-dev{a} libilmbase25{a} libjpeg62-turbo{a} libllvm11{a} libmagic-mgc{a} libmagic1{a} libmd0{a} libopenexr-dev{a} libopenexr25{a} libopengl-dev{a} libopengl0{a} libpipeline1{a} libpixman-1-0{a} libpng16-16{a} libpthread-stubs0-dev{a} libsensors-config{a} libsensors5{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libvulkan1{a} libwayland-client0{a} libwayland-server0{a} libx11-6{a} libx11-data{a} libx11-dev{a} libx11-xcb1{a} libxau-dev{a} libxau6{a} libxcb-dri2-0{a} libxcb-dri3-0{a} libxcb-glx0{a} libxcb-present0{a} libxcb-render0{a} libxcb-shm0{a} libxcb-sync1{a} libxcb-xfixes0{a} libxcb1{a} libxcb1-dev{a} libxcursor1{a} libxdamage1{a} libxdmcp-dev{a} libxdmcp6{a} libxext6{a} libxfixes3{a} libxft2{a} libxinerama1{a} libxml2{a} libxrender1{a} libxshmfence1{a} libxxf86vm1{a} libz3-4{a} m4{a} man-db{a} pkg-config{a} po-debconf{a} sensible-utils{a} ucf{a} x11proto-dev{a} xorg-sgml-doctools{a} xtrans-dev{a} zlib1g-dev{a} 
The following packages are RECOMMENDED but will NOT be installed:
  curl fluid libarchive-cpio-perl libglib2.0-data libglu1-mesa-dev libltdl-dev libmail-sendmail-perl lynx mesa-vulkan-drivers shared-mime-info wget xdg-user-dirs 
0 packages upgraded, 120 newly installed, 0 to remove and 0 not upgraded.
Need to get 59.6 MB of archives. After unpacking 235 MB will be used.
Writing extended state information...
Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-8 [142 kB]
Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB]
Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB]
Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB]
Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB]
Get: 6 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB]
Get: 7 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB]
Get: 8 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB]
Get: 9 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB]
Get: 10 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB]
Get: 11 http://deb.debian.org/debian bullseye/main arm64 ucf all 3.0043 [74.0 kB]
Get: 12 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB]
Get: 13 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB]
Get: 14 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB]
Get: 15 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB]
Get: 16 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB]
Get: 17 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB]
Get: 18 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB]
Get: 19 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB]
Get: 20 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB]
Get: 21 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB]
Get: 22 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB]
Get: 23 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB]
Get: 24 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB]
Get: 25 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB]
Get: 26 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB]
Get: 27 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB]
Get: 28 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB]
Get: 29 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB]
Get: 30 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB]
Get: 31 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get: 32 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB]
Get: 33 http://deb.debian.org/debian bullseye/main arm64 fonts-dejavu-core all 2.37-2 [1069 kB]
Get: 34 http://deb.debian.org/debian bullseye/main arm64 fontconfig-config all 2.13.1-4.2 [281 kB]
Get: 35 http://deb.debian.org/debian bullseye/main arm64 libbrotli1 arm64 1.0.9-2+b2 [267 kB]
Get: 36 http://deb.debian.org/debian bullseye/main arm64 libmd0 arm64 1.0.3-3 [27.9 kB]
Get: 37 http://deb.debian.org/debian bullseye/main arm64 libbsd0 arm64 0.11.3-1 [106 kB]
Get: 38 http://deb.debian.org/debian bullseye/main arm64 libexpat1 arm64 2.2.10-2 [83.1 kB]
Get: 39 http://deb.debian.org/debian bullseye/main arm64 libpng16-16 arm64 1.6.37-3 [289 kB]
Get: 40 http://deb.debian.org/debian bullseye/main arm64 libfreetype6 arm64 2.10.4+dfsg-1 [393 kB]
Get: 41 http://deb.debian.org/debian bullseye/main arm64 libfontconfig1 arm64 2.13.1-4.2 [344 kB]
Get: 42 http://deb.debian.org/debian bullseye/main arm64 libpixman-1-0 arm64 0.40.0-1 [444 kB]
Get: 43 http://deb.debian.org/debian bullseye/main arm64 libxau6 arm64 1:1.0.9-1 [19.7 kB]
Get: 44 http://deb.debian.org/debian bullseye/main arm64 libxdmcp6 arm64 1:1.1.2-3 [25.4 kB]
Get: 45 http://deb.debian.org/debian bullseye/main arm64 libxcb1 arm64 1.14-3 [138 kB]
Get: 46 http://deb.debian.org/debian bullseye/main arm64 libx11-data all 2:1.7.2-1 [311 kB]
Get: 47 http://deb.debian.org/debian bullseye/main arm64 libx11-6 arm64 2:1.7.2-1 [748 kB]
Get: 48 http://deb.debian.org/debian bullseye/main arm64 libxcb-render0 arm64 1.14-3 [111 kB]
Get: 49 http://deb.debian.org/debian bullseye/main arm64 libxcb-shm0 arm64 1.14-3 [101 kB]
Get: 50 http://deb.debian.org/debian bullseye/main arm64 libxext6 arm64 2:1.3.3-1.1 [51.6 kB]
Get: 51 http://deb.debian.org/debian bullseye/main arm64 libxrender1 arm64 1:0.9.10-1 [30.4 kB]
Get: 52 http://deb.debian.org/debian bullseye/main arm64 libcairo2 arm64 1.16.0-5 [648 kB]
Get: 53 http://deb.debian.org/debian bullseye/main arm64 libdrm-common all 2.4.104-1 [14.9 kB]
Get: 54 http://deb.debian.org/debian bullseye/main arm64 libdrm2 arm64 2.4.104-1 [41.3 kB]
Get: 55 http://deb.debian.org/debian bullseye/main arm64 libdrm-amdgpu1 arm64 2.4.104-1 [28.0 kB]
Get: 56 http://deb.debian.org/debian bullseye/main arm64 libdrm-nouveau2 arm64 2.4.104-1 [26.1 kB]
Get: 57 http://deb.debian.org/debian bullseye/main arm64 libdrm-radeon1 arm64 2.4.104-1 [29.3 kB]
Get: 58 http://deb.debian.org/debian bullseye/main arm64 libedit2 arm64 3.1-20191231-2+b1 [92.1 kB]
Get: 59 http://deb.debian.org/debian bullseye/main arm64 libglvnd0 arm64 1.3.2-1 [44.3 kB]
Get: 60 http://deb.debian.org/debian bullseye/main arm64 libwayland-server0 arm64 1.18.0-2~exp1.1 [33.7 kB]
Get: 61 http://deb.debian.org/debian bullseye/main arm64 libgbm1 arm64 20.3.5-1 [72.5 kB]
Get: 62 http://deb.debian.org/debian bullseye/main arm64 libglapi-mesa arm64 20.3.5-1 [96.7 kB]
Get: 63 http://deb.debian.org/debian bullseye/main arm64 libwayland-client0 arm64 1.18.0-2~exp1.1 [26.5 kB]
Get: 64 http://deb.debian.org/debian bullseye/main arm64 libx11-xcb1 arm64 2:1.7.2-1 [203 kB]
Get: 65 http://deb.debian.org/debian bullseye/main arm64 libxcb-dri2-0 arm64 1.14-3 [103 kB]
Get: 66 http://deb.debian.org/debian bullseye/main arm64 libxcb-dri3-0 arm64 1.14-3 [102 kB]
Get: 67 http://deb.debian.org/debian bullseye/main arm64 libxcb-present0 arm64 1.14-3 [101 kB]
Get: 68 http://deb.debian.org/debian bullseye/main arm64 libxcb-sync1 arm64 1.14-3 [105 kB]
Get: 69 http://deb.debian.org/debian bullseye/main arm64 libxcb-xfixes0 arm64 1.14-3 [105 kB]
Get: 70 http://deb.debian.org/debian bullseye/main arm64 libxshmfence1 arm64 1.3-1 [8712 B]
Get: 71 http://deb.debian.org/debian bullseye/main arm64 libegl-mesa0 arm64 20.3.5-1 [134 kB]
Get: 72 http://deb.debian.org/debian bullseye/main arm64 libegl1 arm64 1.3.2-1 [34.4 kB]
Get: 73 http://deb.debian.org/debian bullseye/main arm64 libxcb-glx0 arm64 1.14-3 [118 kB]
Get: 74 http://deb.debian.org/debian bullseye/main arm64 libxdamage1 arm64 1:1.1.5-2 [15.7 kB]
Get: 75 http://deb.debian.org/debian bullseye/main arm64 libxfixes3 arm64 1:5.0.3-2 [22.1 kB]
Get: 76 http://deb.debian.org/debian bullseye/main arm64 libxxf86vm1 arm64 1:1.1.4-1+b2 [20.1 kB]
Get: 77 http://deb.debian.org/debian bullseye/main arm64 libz3-4 arm64 4.8.10-1 [6117 kB]
Get: 78 http://deb.debian.org/debian bullseye/main arm64 libllvm11 arm64 1:11.0.1-2 [14.7 MB]
Get: 79 http://deb.debian.org/debian bullseye/main arm64 libsensors-config all 1:3.6.0-7 [32.3 kB]
Get: 80 http://deb.debian.org/debian bullseye/main arm64 libsensors5 arm64 1:3.6.0-7 [51.2 kB]
Get: 81 http://deb.debian.org/debian bullseye/main arm64 libvulkan1 arm64 1.2.162.0-1 [95.7 kB]
Get: 82 http://deb.debian.org/debian bullseye/main arm64 libgl1-mesa-dri arm64 20.3.5-1 [6552 kB]
Get: 83 http://deb.debian.org/debian bullseye/main arm64 libglx-mesa0 arm64 20.3.5-1 [186 kB]
Get: 84 http://deb.debian.org/debian bullseye/main arm64 libglx0 arm64 1.3.2-1 [32.0 kB]
Get: 85 http://deb.debian.org/debian bullseye/main arm64 libgl1 arm64 1.3.2-1 [91.4 kB]
Get: 86 http://deb.debian.org/debian bullseye/main arm64 xorg-sgml-doctools all 1:1.11-1.1 [22.1 kB]
Get: 87 http://deb.debian.org/debian bullseye/main arm64 x11proto-dev all 2020.1-1 [594 kB]
Get: 88 http://deb.debian.org/debian bullseye/main arm64 libxau-dev arm64 1:1.0.9-1 [23.2 kB]
Get: 89 http://deb.debian.org/debian bullseye/main arm64 libxdmcp-dev arm64 1:1.1.2-3 [41.2 kB]
Get: 90 http://deb.debian.org/debian bullseye/main arm64 xtrans-dev all 1.4.0-1 [98.7 kB]
Get: 91 http://deb.debian.org/debian bullseye/main arm64 libpthread-stubs0-dev arm64 0.4-1 [5336 B]
Get: 92 http://deb.debian.org/debian bullseye/main arm64 libxcb1-dev arm64 1.14-3 [177 kB]
Get: 93 http://deb.debian.org/debian bullseye/main arm64 libx11-dev arm64 2:1.7.2-1 [828 kB]
Get: 94 http://deb.debian.org/debian bullseye/main arm64 libglx-dev arm64 1.3.2-1 [16.3 kB]
Get: 95 http://deb.debian.org/debian bullseye/main arm64 libgl-dev arm64 1.3.2-1 [100 kB]
Get: 96 http://deb.debian.org/debian bullseye/main arm64 libegl-dev arm64 1.3.2-1 [19.6 kB]
Get: 97 http://deb.debian.org/debian bullseye/main arm64 libxcursor1 arm64 1:1.2.0-2 [36.6 kB]
Get: 98 http://deb.debian.org/debian bullseye/main arm64 libxft2 arm64 2.3.2-2 [51.3 kB]
Get: 99 http://deb.debian.org/debian bullseye/main arm64 libxinerama1 arm64 2:1.1.4-2 [17.7 kB]
Get: 100 http://deb.debian.org/debian bullseye/main arm64 libfltk1.3 arm64 1.3.5-3 [531 kB]
Get: 101 http://deb.debian.org/debian bullseye/main arm64 libfltk-cairo1.3 arm64 1.3.5-3 [43.5 kB]
Get: 102 http://deb.debian.org/debian bullseye/main arm64 libfltk-forms1.3 arm64 1.3.5-3 [49.6 kB]
Get: 103 http://deb.debian.org/debian bullseye/main arm64 libfltk-gl1.3 arm64 1.3.5-3 [72.7 kB]
Get: 104 http://deb.debian.org/debian bullseye/main arm64 libjpeg62-turbo arm64 1:2.0.6-4 [133 kB]
Get: 105 http://deb.debian.org/debian bullseye/main arm64 libfltk-images1.3 arm64 1.3.5-3 [61.5 kB]
Get: 106 http://deb.debian.org/debian bullseye/main arm64 libfltk1.3-dev arm64 1.3.5-3 [836 kB]
Get: 107 http://deb.debian.org/debian bullseye/main arm64 libgles1 arm64 1.3.2-1 [13.0 kB]
Get: 108 http://deb.debian.org/debian bullseye/main arm64 libgles2 arm64 1.3.2-1 [18.4 kB]
Get: 109 http://deb.debian.org/debian bullseye/main arm64 libgles-dev arm64 1.3.2-1 [50.3 kB]
Get: 110 http://deb.debian.org/debian bullseye/main arm64 libopengl0 arm64 1.3.2-1 [32.4 kB]
Get: 111 http://deb.debian.org/debian bullseye/main arm64 libopengl-dev arm64 1.3.2-1 [5872 B]
Get: 112 http://deb.debian.org/debian bullseye/main arm64 libglvnd-dev arm64 1.3.2-1 [13.9 kB]
Get: 113 http://deb.debian.org/debian bullseye/main arm64 libgl1-mesa-dev arm64 20.3.5-1 [51.1 kB]
Get: 114 http://deb.debian.org/debian bullseye/main arm64 libglib2.0-0 arm64 2.66.8-1 [1286 kB]
Get: 115 http://deb.debian.org/debian bullseye/main arm64 libilmbase25 arm64 2.5.4-1 [204 kB]
Get: 116 http://deb.debian.org/debian bullseye/main arm64 libilmbase-dev arm64 2.5.4-1 [160 kB]
Get: 117 http://deb.debian.org/debian bullseye/main arm64 libopenexr25 arm64 2.5.4-2 [612 kB]
Get: 118 http://deb.debian.org/debian bullseye/main arm64 libopenexr-dev arm64 2.5.4-2 [159 kB]
Get: 119 http://deb.debian.org/debian bullseye/main arm64 pkg-config arm64 0.29.2-1 [63.6 kB]
Get: 120 http://deb.debian.org/debian bullseye/main arm64 zlib1g-dev arm64 1:1.2.11.dfsg-2 [189 kB]
Fetched 59.6 MB in 1s (50.7 MB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package bsdextrautils.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19646 files and directories currently installed.)
Preparing to unpack .../000-bsdextrautils_2.36.1-8_arm64.deb ...
Unpacking bsdextrautils (2.36.1-8) ...
Selecting previously unselected package libuchardet0:arm64.
Preparing to unpack .../001-libuchardet0_0.0.7-1_arm64.deb ...
Unpacking libuchardet0:arm64 (0.0.7-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../002-groff-base_1.22.4-6_arm64.deb ...
Unpacking groff-base (1.22.4-6) ...
Selecting previously unselected package libpipeline1:arm64.
Preparing to unpack .../003-libpipeline1_1.5.3-1_arm64.deb ...
Unpacking libpipeline1:arm64 (1.5.3-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../004-man-db_2.9.4-2_arm64.deb ...
Unpacking man-db (2.9.4-2) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../005-sensible-utils_0.0.14_all.deb ...
Unpacking sensible-utils (0.0.14) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../006-libmagic-mgc_1%3a5.39-3_arm64.deb ...
Unpacking libmagic-mgc (1:5.39-3) ...
Selecting previously unselected package libmagic1:arm64.
Preparing to unpack .../007-libmagic1_1%3a5.39-3_arm64.deb ...
Unpacking libmagic1:arm64 (1:5.39-3) ...
Selecting previously unselected package file.
Preparing to unpack .../008-file_1%3a5.39-3_arm64.deb ...
Unpacking file (1:5.39-3) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../009-gettext-base_0.21-4_arm64.deb ...
Unpacking gettext-base (0.21-4) ...
Selecting previously unselected package ucf.
Preparing to unpack .../010-ucf_3.0043_all.deb ...
Moving old data out of the way
Unpacking ucf (3.0043) ...
Selecting previously unselected package libsigsegv2:arm64.
Preparing to unpack .../011-libsigsegv2_2.13-1_arm64.deb ...
Unpacking libsigsegv2:arm64 (2.13-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../012-m4_1.4.18-5_arm64.deb ...
Unpacking m4 (1.4.18-5) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../013-autoconf_2.69-14_all.deb ...
Unpacking autoconf (2.69-14) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../014-autotools-dev_20180224.1+nmu1_all.deb ...
Unpacking autotools-dev (20180224.1+nmu1) ...
Selecting previously unselected package automake.
Preparing to unpack .../015-automake_1%3a1.16.3-2_all.deb ...
Unpacking automake (1:1.16.3-2) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../016-autopoint_0.21-4_all.deb ...
Unpacking autopoint (0.21-4) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../017-libdebhelper-perl_13.3.4_all.deb ...
Unpacking libdebhelper-perl (13.3.4) ...
Selecting previously unselected package libtool.
Preparing to unpack .../018-libtool_2.4.6-15_all.deb ...
Unpacking libtool (2.4.6-15) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../019-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../020-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../021-libsub-override-perl_0.09-2_all.deb ...
Unpacking libsub-override-perl (0.09-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../022-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../023-dh-strip-nondeterminism_1.12.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.12.0-1) ...
Selecting previously unselected package libelf1:arm64.
Preparing to unpack .../024-libelf1_0.183-1_arm64.deb ...
Unpacking libelf1:arm64 (0.183-1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../025-dwz_0.13+20210201-1_arm64.deb ...
Unpacking dwz (0.13+20210201-1) ...
Selecting previously unselected package libicu67:arm64.
Preparing to unpack .../026-libicu67_67.1-7_arm64.deb ...
Unpacking libicu67:arm64 (67.1-7) ...
Selecting previously unselected package libxml2:arm64.
Preparing to unpack .../027-libxml2_2.9.10+dfsg-6.7_arm64.deb ...
Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ...
Selecting previously unselected package gettext.
Preparing to unpack .../028-gettext_0.21-4_arm64.deb ...
Unpacking gettext (0.21-4) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../029-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../030-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../031-debhelper_13.3.4_all.deb ...
Unpacking debhelper (13.3.4) ...
Selecting previously unselected package fonts-dejavu-core.
Preparing to unpack .../032-fonts-dejavu-core_2.37-2_all.deb ...
Unpacking fonts-dejavu-core (2.37-2) ...
Selecting previously unselected package fontconfig-config.
Preparing to unpack .../033-fontconfig-config_2.13.1-4.2_all.deb ...
Unpacking fontconfig-config (2.13.1-4.2) ...
Selecting previously unselected package libbrotli1:arm64.
Preparing to unpack .../034-libbrotli1_1.0.9-2+b2_arm64.deb ...
Unpacking libbrotli1:arm64 (1.0.9-2+b2) ...
Selecting previously unselected package libmd0:arm64.
Preparing to unpack .../035-libmd0_1.0.3-3_arm64.deb ...
Unpacking libmd0:arm64 (1.0.3-3) ...
Selecting previously unselected package libbsd0:arm64.
Preparing to unpack .../036-libbsd0_0.11.3-1_arm64.deb ...
Unpacking libbsd0:arm64 (0.11.3-1) ...
Selecting previously unselected package libexpat1:arm64.
Preparing to unpack .../037-libexpat1_2.2.10-2_arm64.deb ...
Unpacking libexpat1:arm64 (2.2.10-2) ...
Selecting previously unselected package libpng16-16:arm64.
Preparing to unpack .../038-libpng16-16_1.6.37-3_arm64.deb ...
Unpacking libpng16-16:arm64 (1.6.37-3) ...
Selecting previously unselected package libfreetype6:arm64.
Preparing to unpack .../039-libfreetype6_2.10.4+dfsg-1_arm64.deb ...
Unpacking libfreetype6:arm64 (2.10.4+dfsg-1) ...
Selecting previously unselected package libfontconfig1:arm64.
Preparing to unpack .../040-libfontconfig1_2.13.1-4.2_arm64.deb ...
Unpacking libfontconfig1:arm64 (2.13.1-4.2) ...
Selecting previously unselected package libpixman-1-0:arm64.
Preparing to unpack .../041-libpixman-1-0_0.40.0-1_arm64.deb ...
Unpacking libpixman-1-0:arm64 (0.40.0-1) ...
Selecting previously unselected package libxau6:arm64.
Preparing to unpack .../042-libxau6_1%3a1.0.9-1_arm64.deb ...
Unpacking libxau6:arm64 (1:1.0.9-1) ...
Selecting previously unselected package libxdmcp6:arm64.
Preparing to unpack .../043-libxdmcp6_1%3a1.1.2-3_arm64.deb ...
Unpacking libxdmcp6:arm64 (1:1.1.2-3) ...
Selecting previously unselected package libxcb1:arm64.
Preparing to unpack .../044-libxcb1_1.14-3_arm64.deb ...
Unpacking libxcb1:arm64 (1.14-3) ...
Selecting previously unselected package libx11-data.
Preparing to unpack .../045-libx11-data_2%3a1.7.2-1_all.deb ...
Unpacking libx11-data (2:1.7.2-1) ...
Selecting previously unselected package libx11-6:arm64.
Preparing to unpack .../046-libx11-6_2%3a1.7.2-1_arm64.deb ...
Unpacking libx11-6:arm64 (2:1.7.2-1) ...
Selecting previously unselected package libxcb-render0:arm64.
Preparing to unpack .../047-libxcb-render0_1.14-3_arm64.deb ...
Unpacking libxcb-render0:arm64 (1.14-3) ...
Selecting previously unselected package libxcb-shm0:arm64.
Preparing to unpack .../048-libxcb-shm0_1.14-3_arm64.deb ...
Unpacking libxcb-shm0:arm64 (1.14-3) ...
Selecting previously unselected package libxext6:arm64.
Preparing to unpack .../049-libxext6_2%3a1.3.3-1.1_arm64.deb ...
Unpacking libxext6:arm64 (2:1.3.3-1.1) ...
Selecting previously unselected package libxrender1:arm64.
Preparing to unpack .../050-libxrender1_1%3a0.9.10-1_arm64.deb ...
Unpacking libxrender1:arm64 (1:0.9.10-1) ...
Selecting previously unselected package libcairo2:arm64.
Preparing to unpack .../051-libcairo2_1.16.0-5_arm64.deb ...
Unpacking libcairo2:arm64 (1.16.0-5) ...
Selecting previously unselected package libdrm-common.
Preparing to unpack .../052-libdrm-common_2.4.104-1_all.deb ...
Unpacking libdrm-common (2.4.104-1) ...
Selecting previously unselected package libdrm2:arm64.
Preparing to unpack .../053-libdrm2_2.4.104-1_arm64.deb ...
Unpacking libdrm2:arm64 (2.4.104-1) ...
Selecting previously unselected package libdrm-amdgpu1:arm64.
Preparing to unpack .../054-libdrm-amdgpu1_2.4.104-1_arm64.deb ...
Unpacking libdrm-amdgpu1:arm64 (2.4.104-1) ...
Selecting previously unselected package libdrm-nouveau2:arm64.
Preparing to unpack .../055-libdrm-nouveau2_2.4.104-1_arm64.deb ...
Unpacking libdrm-nouveau2:arm64 (2.4.104-1) ...
Selecting previously unselected package libdrm-radeon1:arm64.
Preparing to unpack .../056-libdrm-radeon1_2.4.104-1_arm64.deb ...
Unpacking libdrm-radeon1:arm64 (2.4.104-1) ...
Selecting previously unselected package libedit2:arm64.
Preparing to unpack .../057-libedit2_3.1-20191231-2+b1_arm64.deb ...
Unpacking libedit2:arm64 (3.1-20191231-2+b1) ...
Selecting previously unselected package libglvnd0:arm64.
Preparing to unpack .../058-libglvnd0_1.3.2-1_arm64.deb ...
Unpacking libglvnd0:arm64 (1.3.2-1) ...
Selecting previously unselected package libwayland-server0:arm64.
Preparing to unpack .../059-libwayland-server0_1.18.0-2~exp1.1_arm64.deb ...
Unpacking libwayland-server0:arm64 (1.18.0-2~exp1.1) ...
Selecting previously unselected package libgbm1:arm64.
Preparing to unpack .../060-libgbm1_20.3.5-1_arm64.deb ...
Unpacking libgbm1:arm64 (20.3.5-1) ...
Selecting previously unselected package libglapi-mesa:arm64.
Preparing to unpack .../061-libglapi-mesa_20.3.5-1_arm64.deb ...
Unpacking libglapi-mesa:arm64 (20.3.5-1) ...
Selecting previously unselected package libwayland-client0:arm64.
Preparing to unpack .../062-libwayland-client0_1.18.0-2~exp1.1_arm64.deb ...
Unpacking libwayland-client0:arm64 (1.18.0-2~exp1.1) ...
Selecting previously unselected package libx11-xcb1:arm64.
Preparing to unpack .../063-libx11-xcb1_2%3a1.7.2-1_arm64.deb ...
Unpacking libx11-xcb1:arm64 (2:1.7.2-1) ...
Selecting previously unselected package libxcb-dri2-0:arm64.
Preparing to unpack .../064-libxcb-dri2-0_1.14-3_arm64.deb ...
Unpacking libxcb-dri2-0:arm64 (1.14-3) ...
Selecting previously unselected package libxcb-dri3-0:arm64.
Preparing to unpack .../065-libxcb-dri3-0_1.14-3_arm64.deb ...
Unpacking libxcb-dri3-0:arm64 (1.14-3) ...
Selecting previously unselected package libxcb-present0:arm64.
Preparing to unpack .../066-libxcb-present0_1.14-3_arm64.deb ...
Unpacking libxcb-present0:arm64 (1.14-3) ...
Selecting previously unselected package libxcb-sync1:arm64.
Preparing to unpack .../067-libxcb-sync1_1.14-3_arm64.deb ...
Unpacking libxcb-sync1:arm64 (1.14-3) ...
Selecting previously unselected package libxcb-xfixes0:arm64.
Preparing to unpack .../068-libxcb-xfixes0_1.14-3_arm64.deb ...
Unpacking libxcb-xfixes0:arm64 (1.14-3) ...
Selecting previously unselected package libxshmfence1:arm64.
Preparing to unpack .../069-libxshmfence1_1.3-1_arm64.deb ...
Unpacking libxshmfence1:arm64 (1.3-1) ...
Selecting previously unselected package libegl-mesa0:arm64.
Preparing to unpack .../070-libegl-mesa0_20.3.5-1_arm64.deb ...
Unpacking libegl-mesa0:arm64 (20.3.5-1) ...
Selecting previously unselected package libegl1:arm64.
Preparing to unpack .../071-libegl1_1.3.2-1_arm64.deb ...
Unpacking libegl1:arm64 (1.3.2-1) ...
Selecting previously unselected package libxcb-glx0:arm64.
Preparing to unpack .../072-libxcb-glx0_1.14-3_arm64.deb ...
Unpacking libxcb-glx0:arm64 (1.14-3) ...
Selecting previously unselected package libxdamage1:arm64.
Preparing to unpack .../073-libxdamage1_1%3a1.1.5-2_arm64.deb ...
Unpacking libxdamage1:arm64 (1:1.1.5-2) ...
Selecting previously unselected package libxfixes3:arm64.
Preparing to unpack .../074-libxfixes3_1%3a5.0.3-2_arm64.deb ...
Unpacking libxfixes3:arm64 (1:5.0.3-2) ...
Selecting previously unselected package libxxf86vm1:arm64.
Preparing to unpack .../075-libxxf86vm1_1%3a1.1.4-1+b2_arm64.deb ...
Unpacking libxxf86vm1:arm64 (1:1.1.4-1+b2) ...
Selecting previously unselected package libz3-4:arm64.
Preparing to unpack .../076-libz3-4_4.8.10-1_arm64.deb ...
Unpacking libz3-4:arm64 (4.8.10-1) ...
Selecting previously unselected package libllvm11:arm64.
Preparing to unpack .../077-libllvm11_1%3a11.0.1-2_arm64.deb ...
Unpacking libllvm11:arm64 (1:11.0.1-2) ...
Selecting previously unselected package libsensors-config.
Preparing to unpack .../078-libsensors-config_1%3a3.6.0-7_all.deb ...
Unpacking libsensors-config (1:3.6.0-7) ...
Selecting previously unselected package libsensors5:arm64.
Preparing to unpack .../079-libsensors5_1%3a3.6.0-7_arm64.deb ...
Unpacking libsensors5:arm64 (1:3.6.0-7) ...
Selecting previously unselected package libvulkan1:arm64.
Preparing to unpack .../080-libvulkan1_1.2.162.0-1_arm64.deb ...
Unpacking libvulkan1:arm64 (1.2.162.0-1) ...
Selecting previously unselected package libgl1-mesa-dri:arm64.
Preparing to unpack .../081-libgl1-mesa-dri_20.3.5-1_arm64.deb ...
Unpacking libgl1-mesa-dri:arm64 (20.3.5-1) ...
Selecting previously unselected package libglx-mesa0:arm64.
Preparing to unpack .../082-libglx-mesa0_20.3.5-1_arm64.deb ...
Unpacking libglx-mesa0:arm64 (20.3.5-1) ...
Selecting previously unselected package libglx0:arm64.
Preparing to unpack .../083-libglx0_1.3.2-1_arm64.deb ...
Unpacking libglx0:arm64 (1.3.2-1) ...
Selecting previously unselected package libgl1:arm64.
Preparing to unpack .../084-libgl1_1.3.2-1_arm64.deb ...
Unpacking libgl1:arm64 (1.3.2-1) ...
Selecting previously unselected package xorg-sgml-doctools.
Preparing to unpack .../085-xorg-sgml-doctools_1%3a1.11-1.1_all.deb ...
Unpacking xorg-sgml-doctools (1:1.11-1.1) ...
Selecting previously unselected package x11proto-dev.
Preparing to unpack .../086-x11proto-dev_2020.1-1_all.deb ...
Unpacking x11proto-dev (2020.1-1) ...
Selecting previously unselected package libxau-dev:arm64.
Preparing to unpack .../087-libxau-dev_1%3a1.0.9-1_arm64.deb ...
Unpacking libxau-dev:arm64 (1:1.0.9-1) ...
Selecting previously unselected package libxdmcp-dev:arm64.
Preparing to unpack .../088-libxdmcp-dev_1%3a1.1.2-3_arm64.deb ...
Unpacking libxdmcp-dev:arm64 (1:1.1.2-3) ...
Selecting previously unselected package xtrans-dev.
Preparing to unpack .../089-xtrans-dev_1.4.0-1_all.deb ...
Unpacking xtrans-dev (1.4.0-1) ...
Selecting previously unselected package libpthread-stubs0-dev:arm64.
Preparing to unpack .../090-libpthread-stubs0-dev_0.4-1_arm64.deb ...
Unpacking libpthread-stubs0-dev:arm64 (0.4-1) ...
Selecting previously unselected package libxcb1-dev:arm64.
Preparing to unpack .../091-libxcb1-dev_1.14-3_arm64.deb ...
Unpacking libxcb1-dev:arm64 (1.14-3) ...
Selecting previously unselected package libx11-dev:arm64.
Preparing to unpack .../092-libx11-dev_2%3a1.7.2-1_arm64.deb ...
Unpacking libx11-dev:arm64 (2:1.7.2-1) ...
Selecting previously unselected package libglx-dev:arm64.
Preparing to unpack .../093-libglx-dev_1.3.2-1_arm64.deb ...
Unpacking libglx-dev:arm64 (1.3.2-1) ...
Selecting previously unselected package libgl-dev:arm64.
Preparing to unpack .../094-libgl-dev_1.3.2-1_arm64.deb ...
Unpacking libgl-dev:arm64 (1.3.2-1) ...
Selecting previously unselected package libegl-dev:arm64.
Preparing to unpack .../095-libegl-dev_1.3.2-1_arm64.deb ...
Unpacking libegl-dev:arm64 (1.3.2-1) ...
Selecting previously unselected package libxcursor1:arm64.
Preparing to unpack .../096-libxcursor1_1%3a1.2.0-2_arm64.deb ...
Unpacking libxcursor1:arm64 (1:1.2.0-2) ...
Selecting previously unselected package libxft2:arm64.
Preparing to unpack .../097-libxft2_2.3.2-2_arm64.deb ...
Unpacking libxft2:arm64 (2.3.2-2) ...
Selecting previously unselected package libxinerama1:arm64.
Preparing to unpack .../098-libxinerama1_2%3a1.1.4-2_arm64.deb ...
Unpacking libxinerama1:arm64 (2:1.1.4-2) ...
Selecting previously unselected package libfltk1.3:arm64.
Preparing to unpack .../099-libfltk1.3_1.3.5-3_arm64.deb ...
Unpacking libfltk1.3:arm64 (1.3.5-3) ...
Selecting previously unselected package libfltk-cairo1.3:arm64.
Preparing to unpack .../100-libfltk-cairo1.3_1.3.5-3_arm64.deb ...
Unpacking libfltk-cairo1.3:arm64 (1.3.5-3) ...
Selecting previously unselected package libfltk-forms1.3:arm64.
Preparing to unpack .../101-libfltk-forms1.3_1.3.5-3_arm64.deb ...
Unpacking libfltk-forms1.3:arm64 (1.3.5-3) ...
Selecting previously unselected package libfltk-gl1.3:arm64.
Preparing to unpack .../102-libfltk-gl1.3_1.3.5-3_arm64.deb ...
Unpacking libfltk-gl1.3:arm64 (1.3.5-3) ...
Selecting previously unselected package libjpeg62-turbo:arm64.
Preparing to unpack .../103-libjpeg62-turbo_1%3a2.0.6-4_arm64.deb ...
Unpacking libjpeg62-turbo:arm64 (1:2.0.6-4) ...
Selecting previously unselected package libfltk-images1.3:arm64.
Preparing to unpack .../104-libfltk-images1.3_1.3.5-3_arm64.deb ...
Unpacking libfltk-images1.3:arm64 (1.3.5-3) ...
Selecting previously unselected package libfltk1.3-dev.
Preparing to unpack .../105-libfltk1.3-dev_1.3.5-3_arm64.deb ...
Unpacking libfltk1.3-dev (1.3.5-3) ...
Selecting previously unselected package libgles1:arm64.
Preparing to unpack .../106-libgles1_1.3.2-1_arm64.deb ...
Unpacking libgles1:arm64 (1.3.2-1) ...
Selecting previously unselected package libgles2:arm64.
Preparing to unpack .../107-libgles2_1.3.2-1_arm64.deb ...
Unpacking libgles2:arm64 (1.3.2-1) ...
Selecting previously unselected package libgles-dev:arm64.
Preparing to unpack .../108-libgles-dev_1.3.2-1_arm64.deb ...
Unpacking libgles-dev:arm64 (1.3.2-1) ...
Selecting previously unselected package libopengl0:arm64.
Preparing to unpack .../109-libopengl0_1.3.2-1_arm64.deb ...
Unpacking libopengl0:arm64 (1.3.2-1) ...
Selecting previously unselected package libopengl-dev:arm64.
Preparing to unpack .../110-libopengl-dev_1.3.2-1_arm64.deb ...
Unpacking libopengl-dev:arm64 (1.3.2-1) ...
Selecting previously unselected package libglvnd-dev:arm64.
Preparing to unpack .../111-libglvnd-dev_1.3.2-1_arm64.deb ...
Unpacking libglvnd-dev:arm64 (1.3.2-1) ...
Selecting previously unselected package libgl1-mesa-dev:arm64.
Preparing to unpack .../112-libgl1-mesa-dev_20.3.5-1_arm64.deb ...
Unpacking libgl1-mesa-dev:arm64 (20.3.5-1) ...
Selecting previously unselected package libglib2.0-0:arm64.
Preparing to unpack .../113-libglib2.0-0_2.66.8-1_arm64.deb ...
Unpacking libglib2.0-0:arm64 (2.66.8-1) ...
Selecting previously unselected package libilmbase25:arm64.
Preparing to unpack .../114-libilmbase25_2.5.4-1_arm64.deb ...
Unpacking libilmbase25:arm64 (2.5.4-1) ...
Selecting previously unselected package libilmbase-dev:arm64.
Preparing to unpack .../115-libilmbase-dev_2.5.4-1_arm64.deb ...
Unpacking libilmbase-dev:arm64 (2.5.4-1) ...
Selecting previously unselected package libopenexr25:arm64.
Preparing to unpack .../116-libopenexr25_2.5.4-2_arm64.deb ...
Unpacking libopenexr25:arm64 (2.5.4-2) ...
Selecting previously unselected package libopenexr-dev.
Preparing to unpack .../117-libopenexr-dev_2.5.4-2_arm64.deb ...
Unpacking libopenexr-dev (2.5.4-2) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../118-pkg-config_0.29.2-1_arm64.deb ...
Unpacking pkg-config (0.29.2-1) ...
Selecting previously unselected package zlib1g-dev:arm64.
Preparing to unpack .../119-zlib1g-dev_1%3a1.2.11.dfsg-2_arm64.deb ...
Unpacking zlib1g-dev:arm64 (1:1.2.11.dfsg-2) ...
Setting up libexpat1:arm64 (2.2.10-2) ...
Setting up libpipeline1:arm64 (1.5.3-1) ...
Setting up libpixman-1-0:arm64 (0.40.0-1) ...
Setting up libwayland-server0:arm64 (1.18.0-2~exp1.1) ...
Setting up libxau6:arm64 (1:1.0.9-1) ...
Setting up bsdextrautils (2.36.1-8) ...
update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode
Setting up libicu67:arm64 (67.1-7) ...
Setting up libmagic-mgc (1:5.39-3) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libglib2.0-0:arm64 (2.66.8-1) ...
No schema files found: doing nothing.
Setting up libglvnd0:arm64 (1.3.2-1) ...
Setting up libdebhelper-perl (13.3.4) ...
Setting up libbrotli1:arm64 (1.0.9-2+b2) ...
Setting up libsensors-config (1:3.6.0-7) ...
Setting up libmagic1:arm64 (1:5.39-3) ...
Setting up gettext-base (0.21-4) ...
Setting up libilmbase25:arm64 (2.5.4-1) ...
Setting up file (1:5.39-3) ...
Setting up libpthread-stubs0-dev:arm64 (0.4-1) ...
Setting up libopengl0:arm64 (1.3.2-1) ...
Setting up libopenexr25:arm64 (2.5.4-2) ...
Setting up xtrans-dev (1.4.0-1) ...
Setting up autotools-dev (20180224.1+nmu1) ...
Setting up libz3-4:arm64 (4.8.10-1) ...
Setting up libgles2:arm64 (1.3.2-1) ...
Setting up libjpeg62-turbo:arm64 (1:2.0.6-4) ...
Setting up libx11-data (2:1.7.2-1) ...
Setting up libgles1:arm64 (1.3.2-1) ...
Setting up libsigsegv2:arm64 (2.13-1) ...
Setting up libpng16-16:arm64 (1.6.37-3) ...
Setting up autopoint (0.21-4) ...
Setting up pkg-config (0.29.2-1) ...
Setting up fonts-dejavu-core (2.37-2) ...
Setting up libsensors5:arm64 (1:3.6.0-7) ...
Setting up libglapi-mesa:arm64 (20.3.5-1) ...
Setting up libvulkan1:arm64 (1.2.162.0-1) ...
Setting up zlib1g-dev:arm64 (1:1.2.11.dfsg-2) ...
Setting up libmd0:arm64 (1.0.3-3) ...
Setting up sensible-utils (0.0.14) ...
Setting up libxshmfence1:arm64 (1.3-1) ...
Setting up libuchardet0:arm64 (0.0.7-1) ...
Setting up libsub-override-perl (0.09-2) ...
Setting up xorg-sgml-doctools (1:1.11-1.1) ...
Setting up libopengl-dev:arm64 (1.3.2-1) ...
Setting up libbsd0:arm64 (0.11.3-1) ...
Setting up libdrm-common (2.4.104-1) ...
Setting up libelf1:arm64 (0.183-1) ...
Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ...
Setting up libilmbase-dev:arm64 (2.5.4-1) ...
Setting up libwayland-client0:arm64 (1.18.0-2~exp1.1) ...
Setting up x11proto-dev (2020.1-1) ...
Setting up libfile-stripnondeterminism-perl (1.12.0-1) ...
Setting up libxdmcp6:arm64 (1:1.1.2-3) ...
Setting up libxcb1:arm64 (1.14-3) ...
Setting up gettext (0.21-4) ...
Setting up libxcb-xfixes0:arm64 (1.14-3) ...
Setting up libxau-dev:arm64 (1:1.0.9-1) ...
Setting up libtool (2.4.6-15) ...
Setting up libxcb-render0:arm64 (1.14-3) ...
Setting up libxcb-glx0:arm64 (1.14-3) ...
Setting up libedit2:arm64 (3.1-20191231-2+b1) ...
Setting up m4 (1.4.18-5) ...
Setting up libxcb-shm0:arm64 (1.14-3) ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up libxcb-present0:arm64 (1.14-3) ...
Setting up libxdmcp-dev:arm64 (1:1.1.2-3) ...
Setting up libopenexr-dev (2.5.4-2) ...
Setting up libllvm11:arm64 (1:11.0.1-2) ...
Setting up libfreetype6:arm64 (2.10.4+dfsg-1) ...
Setting up libxcb-sync1:arm64 (1.14-3) ...
Setting up ucf (3.0043) ...
Setting up autoconf (2.69-14) ...
Setting up libxcb-dri2-0:arm64 (1.14-3) ...
Setting up dh-strip-nondeterminism (1.12.0-1) ...
Setting up libdrm2:arm64 (2.4.104-1) ...
Setting up dwz (0.13+20210201-1) ...
Setting up groff-base (1.22.4-6) ...
Setting up libx11-6:arm64 (2:1.7.2-1) ...
Setting up libdrm-amdgpu1:arm64 (2.4.104-1) ...
Setting up automake (1:1.16.3-2) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libxcb-dri3-0:arm64 (1.14-3) ...
Setting up libx11-xcb1:arm64 (2:1.7.2-1) ...
Setting up libdrm-nouveau2:arm64 (2.4.104-1) ...
Setting up libxdamage1:arm64 (1:1.1.5-2) ...
Setting up libxcb1-dev:arm64 (1.14-3) ...
Setting up libxrender1:arm64 (1:0.9.10-1) ...
Setting up libgbm1:arm64 (20.3.5-1) ...
Setting up libdrm-radeon1:arm64 (2.4.104-1) ...
Setting up fontconfig-config (2.13.1-4.2) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libgl1-mesa-dri:arm64 (20.3.5-1) ...
Setting up libx11-dev:arm64 (2:1.7.2-1) ...
Setting up libxext6:arm64 (2:1.3.3-1.1) ...
Setting up man-db (2.9.4-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libxxf86vm1:arm64 (1:1.1.4-1+b2) ...
Setting up dh-autoreconf (20) ...
Setting up libegl-mesa0:arm64 (20.3.5-1) ...
Setting up libxfixes3:arm64 (1:5.0.3-2) ...
Setting up libxinerama1:arm64 (2:1.1.4-2) ...
Setting up libegl1:arm64 (1.3.2-1) ...
Setting up libfontconfig1:arm64 (2.13.1-4.2) ...
Setting up libxft2:arm64 (2.3.2-2) ...
Setting up libglx-mesa0:arm64 (20.3.5-1) ...
Setting up libglx0:arm64 (1.3.2-1) ...
Setting up libxcursor1:arm64 (1:1.2.0-2) ...
Setting up debhelper (13.3.4) ...
Setting up libcairo2:arm64 (1.16.0-5) ...
Setting up libgl1:arm64 (1.3.2-1) ...
Setting up libglx-dev:arm64 (1.3.2-1) ...
Setting up libgl-dev:arm64 (1.3.2-1) ...
Setting up libegl-dev:arm64 (1.3.2-1) ...
Setting up libfltk1.3:arm64 (1.3.5-3) ...
Setting up libfltk-gl1.3:arm64 (1.3.5-3) ...
Setting up libfltk-cairo1.3:arm64 (1.3.5-3) ...
Setting up libfltk-images1.3:arm64 (1.3.5-3) ...
Setting up libfltk-forms1.3:arm64 (1.3.5-3) ...
Setting up libgles-dev:arm64 (1.3.2-1) ...
Setting up libfltk1.3-dev (1.3.5-3) ...
Setting up libglvnd-dev:arm64 (1.3.2-1) ...
Setting up libgl1-mesa-dev:arm64 (20.3.5-1) ...
Processing triggers for libc-bin (2.31-13) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
 -> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
fakeroot is already the newest version (1.25.3-1.1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
I: Building the package
I: Running cd /build/openexr-viewers-2.3.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S  > ../openexr-viewers_2.3.0-1_source.changes
dpkg-buildpackage: info: source package openexr-viewers
dpkg-buildpackage: info: source version 2.3.0-1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Pino Toscano <pino@debian.org>
 dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
 fakeroot debian/rules clean
dh clean
   dh_clean
 debian/rules build
dh build
   dh_update_autotools_config
   debian/rules override_dh_autoreconf
make[1]: Entering directory '/build/openexr-viewers-2.3.0'
dh_autoreconf ./bootstrap
running aclocal -I m4 ...
running libtoolize --automake --copy ...
running automake --add-missing --copy --foreign ...
configure.ac:20: installing './compile'
exrdisplay/Makefile.am:7: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
playexr/Makefile.am:9: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
running autoconf ...

Now type './configure' to configure OpenEXR_Viewers.

make[1]: Leaving directory '/build/openexr-viewers-2.3.0'
   debian/rules override_dh_auto_configure
make[1]: Entering directory '/build/openexr-viewers-2.3.0'
dh_auto_configure -- --disable-openexrctltest
	./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --disable-openexrctltest
checking build system type... aarch64-unknown-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... none
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... none
checking whether ln -s works... yes
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether make sets $(MAKE)... (cached) yes
LIB64_IF_EXISTS ...   
test_prefix = NONE
checking for pkg-config... /usr/bin/pkg-config
using pkg-config to set OPENEXR_CXXFLAGS and OPENEXR_LDFLAGS:
    OPENEXR_CXXFLAGS = -pthread -I/usr/include/OpenEXR
    OPENEXR_LDFLAGS = 
    OPENEXR_LIBS = -lIlmImf-2_5 -lImath-2_5 -lHalf-2_5 -lIex-2_5 -lIexMath-2_5 -lIlmThread-2_5 -pthread
test_prefix = NONE
checking for pkg-config... (cached) /usr/bin/pkg-config
using pkg-config to set OPENEXR_CTL_CXXFLAGS and OPENEXR_CTL_LDFLAGS:
Package OpenEXR_CTL was not found in the pkg-config search path.
Perhaps you should add the directory containing `OpenEXR_CTL.pc'
to the PKG_CONFIG_PATH environment variable
No package 'OpenEXR_CTL' found
Package OpenEXR_CTL was not found in the pkg-config search path.
Perhaps you should add the directory containing `OpenEXR_CTL.pc'
to the PKG_CONFIG_PATH environment variable
No package 'OpenEXR_CTL' found
Package OpenEXR_CTL was not found in the pkg-config search path.
Perhaps you should add the directory containing `OpenEXR_CTL.pc'
to the PKG_CONFIG_PATH environment variable
No package 'OpenEXR_CTL' found
using prefix to set OPENEXR_CTL_CXXFLAGS and OPENEXR_CTL_LDFLAGS:
    OPENEXR_CTL_CXXFLAGS =  -I/usr/include/OpenEXR -I/usr/include/CTL
    OPENEXR_CTL_LDFLAGS = -L/usr/lib
    OPENEXR_CTL_LIBS = -lIlmImfCtl -lIlmImf -lz -lImath -lHalf -lIex -lIlmThread -lpthread -lIlmCtlSimd -lIlmCtlMath -lIlmCtl
checking whether g++ supports C++14 features by default... yes
checking for OpenEXR... yes
Compiled and ran OpenEXR test program.
checking for OpenEXR_CTL... no
*** Could not run the OpenEXR_CTL test program, checking why...
*** The test program could not be compiled.  Is OpenEXR_CTL installed?
*** Check that the cflags (below) includes the OpenEXR_CTL include directory
***
*** Flags used by the test:
***     cflags: -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14  -I/usr/include/OpenEXR -I/usr/include/CTL 
***     ldflags: -Wl,-z,relro -L/usr/lib
***
*** You can also run configure with --disable-openexrctltest to skip this test.
The OpenEXR_CTL package could not be found.  Will build and install playexr and exrdisplay without ctl support. 
checking for fltk-config... /usr/bin/fltk-config
checking for FLTK with GL support... yes

---------------------------------------------
Fltk setup:

FLTK_CXXFLAGS		-I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 
FLTK_LDFLAGS            -lfltk_gl -lfltk -lX11
---------------------------------------------

checking for Cg... no
*** The Cg test program could not be compiled.
*** Possible reasons:
***     - The Cg libraries and includes are not installed.
***     - configure cannot find Cg (use the
***       --with-cg-prefix option to tell configure where
***       to find it).
***     - Your version of Cg is out of date.  Please update it
***       to the latest version.
***
*** The exrdisplay program will not be built with fragment shader
*** support because the fragment shader support depends on Cg.
checking for ANSI C header files... (cached) yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking for gcc optimization flags... -pipe
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config/Makefile
config.status: creating exrdisplay/Makefile
config.status: creating playexr/Makefile
config.status: creating doc/Makefile
config.status: creating config/OpenEXR_ViewersConfig.h
config.status: executing depfiles commands
config.status: executing libtool commands

---------------------------------------------
Summary for OpenEXR features:

build exrdisplay FLTK application		yes
    with fragment shader support		no
ctl support                                     no
---------------------------------------------
  
make[1]: Leaving directory '/build/openexr-viewers-2.3.0'
   dh_auto_build
	make -j8
make[1]: Entering directory '/build/openexr-viewers-2.3.0'
Making all in playexr
make[2]: Entering directory '/build/openexr-viewers-2.3.0/playexr'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/openexr-viewers-2.3.0/playexr'
Making all in exrdisplay
make[2]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay'
g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16  -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR  -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o main.o main.cpp
g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16  -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR  -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o ImageView.o ImageView.cpp
g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16  -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR  -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o loadImage.o loadImage.cpp
g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16  -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR  -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o scaleImage.o scaleImage.cpp
g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16  -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR  -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o applyCtl.o applyCtl.cpp
g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16  -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR  -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o GlWindow3d.o GlWindow3d.cpp
/usr/bin/fltk-config --post exrdisplay
/bin/bash ../libtool  --tag=CXX   --mode=link g++ -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14  -Wl,-z,relro -o exrdisplay main.o ImageView.o loadImage.o scaleImage.o applyCtl.o GlWindow3d.o -lGL  -lIlmImf-2_5 -lImath-2_5 -lHalf-2_5 -lIex-2_5 -lIexMath-2_5 -lIlmThread-2_5 -pthread -DHAVE_CTL_INTERPRETER=0  -DHAVE_CTL_INTERPRETER=0 -lIlmImf-2_5 -lImath-2_5 -lHalf-2_5 -lIex-2_5 -lIexMath-2_5 -lIlmThread-2_5 -pthread -lfltk_gl -lfltk -lX11 
libtool: link: g++ -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -Wl,-z -Wl,relro -o exrdisplay main.o ImageView.o loadImage.o scaleImage.o applyCtl.o GlWindow3d.o -pthread -DHAVE_CTL_INTERPRETER=0 -DHAVE_CTL_INTERPRETER=0 -pthread  -lGL -lIlmImf-2_5 -lImath-2_5 -lHalf-2_5 -lIex-2_5 -lIexMath-2_5 -lIlmThread-2_5 -lfltk_gl -lfltk -lX11 -pthread
make[2]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay'
Making all in doc
make[2]: Entering directory '/build/openexr-viewers-2.3.0/doc'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/openexr-viewers-2.3.0/doc'
Making all in config
make[2]: Entering directory '/build/openexr-viewers-2.3.0/config'
make  all-am
make[3]: Entering directory '/build/openexr-viewers-2.3.0/config'
make[3]: Leaving directory '/build/openexr-viewers-2.3.0/config'
make[2]: Leaving directory '/build/openexr-viewers-2.3.0/config'
make[2]: Entering directory '/build/openexr-viewers-2.3.0'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/build/openexr-viewers-2.3.0'
make[1]: Leaving directory '/build/openexr-viewers-2.3.0'
   dh_auto_test
	make -j8 check VERBOSE=1
make[1]: Entering directory '/build/openexr-viewers-2.3.0'
Making check in playexr
make[2]: Entering directory '/build/openexr-viewers-2.3.0/playexr'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/build/openexr-viewers-2.3.0/playexr'
Making check in exrdisplay
make[2]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay'
/usr/bin/fltk-config --post exrdisplay
make[2]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay'
Making check in doc
make[2]: Entering directory '/build/openexr-viewers-2.3.0/doc'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/build/openexr-viewers-2.3.0/doc'
Making check in config
make[2]: Entering directory '/build/openexr-viewers-2.3.0/config'
make[2]: Leaving directory '/build/openexr-viewers-2.3.0/config'
make[2]: Entering directory '/build/openexr-viewers-2.3.0'
make[2]: Nothing to be done for 'check-am'.
make[2]: Leaving directory '/build/openexr-viewers-2.3.0'
make[1]: Leaving directory '/build/openexr-viewers-2.3.0'
   create-stamp debian/debhelper-build-stamp
 fakeroot debian/rules binary
dh binary
   dh_testroot
   dh_prep
   debian/rules override_dh_auto_install
make[1]: Entering directory '/build/openexr-viewers-2.3.0'
dh_auto_install
	make -j1 install DESTDIR=/build/openexr-viewers-2.3.0/debian/openexr-viewers AM_UPDATE_INFO_DIR=no
make[2]: Entering directory '/build/openexr-viewers-2.3.0'
Making install in playexr
make[3]: Entering directory '/build/openexr-viewers-2.3.0/playexr'
make[4]: Entering directory '/build/openexr-viewers-2.3.0/playexr'
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/openexr-viewers-2.3.0/playexr'
make[3]: Leaving directory '/build/openexr-viewers-2.3.0/playexr'
Making install in exrdisplay
make[3]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay'
/usr/bin/fltk-config --post exrdisplay
make[4]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay'
 /bin/mkdir -p '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c exrdisplay '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/bin'
libtool: install: /usr/bin/install -c exrdisplay /build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/bin/exrdisplay
make  install-exec-hook
make[5]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay'
/usr/bin/fltk-config --post /build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/bin/exrdisplay
make[5]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay'
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay'
make[3]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay'
Making install in doc
make[3]: Entering directory '/build/openexr-viewers-2.3.0/doc'
make[4]: Entering directory '/build/openexr-viewers-2.3.0/doc'
make[4]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/share/doc/OpenEXR_Viewers-2.3.0'
 /usr/bin/install -c -m 644 OpenEXRViewers.odt OpenEXRViewers.pdf '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/share/doc/OpenEXR_Viewers-2.3.0'
make[4]: Leaving directory '/build/openexr-viewers-2.3.0/doc'
make[3]: Leaving directory '/build/openexr-viewers-2.3.0/doc'
Making install in config
make[3]: Entering directory '/build/openexr-viewers-2.3.0/config'
make[4]: Entering directory '/build/openexr-viewers-2.3.0/config'
make[4]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/include/OpenEXR'
 /usr/bin/install -c -m 644 OpenEXR_ViewersConfig.h '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/include/OpenEXR'
make[4]: Leaving directory '/build/openexr-viewers-2.3.0/config'
make[3]: Leaving directory '/build/openexr-viewers-2.3.0/config'
make[3]: Entering directory '/build/openexr-viewers-2.3.0'
make[4]: Entering directory '/build/openexr-viewers-2.3.0'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/openexr-viewers-2.3.0'
make[3]: Leaving directory '/build/openexr-viewers-2.3.0'
make[2]: Leaving directory '/build/openexr-viewers-2.3.0'
# remove development-like files
rm -rf debian/openexr-viewers/usr/include/
# move documentation to the right place
mv debian/openexr-viewers/usr/share/doc/OpenEXR_Viewers-*/ debian/openexr-viewers/usr/share/doc/openexr-viewers
# remove documentation bits which we are not interested about
rm debian/openexr-viewers/usr/share/doc/openexr-viewers/*.odt
make[1]: Leaving directory '/build/openexr-viewers-2.3.0'
   dh_installdocs
   dh_installchangelogs
   dh_installman
   dh_perl
   dh_link
   dh_strip_nondeterminism
   debian/rules override_dh_compress
make[1]: Entering directory '/build/openexr-viewers-2.3.0'
dh_compress -X.pdf
make[1]: Leaving directory '/build/openexr-viewers-2.3.0'
   dh_fixperms
   dh_missing
   dh_dwz
   dh_strip
   dh_makeshlibs
   dh_shlibdeps
   dh_installdeb
   dh_gencontrol
   dh_md5sums
   dh_builddeb
dpkg-deb: building package 'openexr-viewers' in '../openexr-viewers_2.3.0-1_arm64.deb'.
dpkg-deb: building package 'openexr-viewers-dbgsym' in '../openexr-viewers-dbgsym_2.3.0-1_arm64.deb'.
 dpkg-genbuildinfo --build=binary
 dpkg-genchanges --build=binary >../openexr-viewers_2.3.0-1_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
 dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
dpkg-genchanges: info: including full source code in upload
I: copying local configuration
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env 
I: removing directory /srv/workspace/pbuilder/1286 and its subdirectories
I: Current time: Sun Aug 22 13:12:47 -12 2021
I: pbuilder-time-stamp: 1629681167
Mon Aug 23 01:12:49 UTC 2021  I: 1st build successful. Starting 2nd build on remote node codethink9-arm64.debian.net.
Mon Aug 23 01:12:49 UTC 2021  I: Preparing to do remote build '2' on codethink9-arm64.debian.net.
Mon Aug 23 01:14:04 UTC 2021  I: Deleting $TMPDIR on codethink9-arm64.debian.net.
Mon Aug 23 01:14:04 UTC 2021  I: openexr-viewers_2.3.0-1_arm64.changes:
Format: 1.8
Date: Sun, 05 Apr 2020 11:13:58 +0200
Source: openexr-viewers
Binary: openexr-viewers openexr-viewers-dbgsym
Architecture: arm64
Version: 2.3.0-1
Distribution: unstable
Urgency: medium
Maintainer: Pino Toscano <pino@debian.org>
Changed-By: Pino Toscano <pino@debian.org>
Description:
 openexr-viewers - viewer for images in the OpenEXR format
Changes:
 openexr-viewers (2.3.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Update the patches:
     - 001_fixctldetection.diff: drop, fixed upstream
     - 002_gcc43.diff: drop, fixed upstream
     - 003_gcc44.diff: drop, fixed upstream
     - 004_link_gl.diff: refresh, and rename to link_gl.diff
   * Bump the debhelper compatibility to 12:
     - switch the debhelper build dependency to debhelper-compat 12
     - remove debian/compat
     - stop explicitly using the autotools_dev dh addon, as it is used by default
       with the autoreconf
     - drop the autotools-dev build dependency
     - stop passing --list-missing to dh_missing, as it is done by default
     - use the upstream bootstrap script for autoreconf
   * Explicitly add the pkg-config build dependency.
   * Remove extra empty line at the end of control.
   * Use https in Homepage.
   * Use https in the watch file (even if the location is old).
   * Bump Standards-Version to 4.5.0, no changes required.
   * Simplify the installation:
     - do not force debian/tmp as destdir, but rather install in the package
       location
     - pick the documentation from that location
     - remove the files that we do not want
     - remove debian/install and debian/openexr-viewers.docs, no more needed now
   * Switch from FLTK 1.1 to FLTK 1.3:
     - replace the libfltk1.1-dev build dependency with libfltk1.3-dev
Checksums-Sha1:
 2de1e5cc2b9e8a61d8a474bb14776cd47d14eb15 251348 openexr-viewers-dbgsym_2.3.0-1_arm64.deb
 bb6976afe7ddde00f96617dd2071185a5a08f445 7391 openexr-viewers_2.3.0-1_arm64.buildinfo
 1d58e459934ea8fbac20eadd1db1fc8dcd8a8d40 110844 openexr-viewers_2.3.0-1_arm64.deb
Checksums-Sha256:
 1486a8a3d017b93aa61fa3981dc13334f4d2e98051e1a623f58ed4fb5d9fe5c9 251348 openexr-viewers-dbgsym_2.3.0-1_arm64.deb
 d698ea66240a1ac05f11ad2108031dd1b013fa02520f290a331432dd86672ed5 7391 openexr-viewers_2.3.0-1_arm64.buildinfo
 6f375d97bb159fcff6bd93e4b3563af7e4c26773d5b215e6162175ab8cb20ced 110844 openexr-viewers_2.3.0-1_arm64.deb
Files:
 586838e1553299c40519ffe55df48a45 251348 debug optional openexr-viewers-dbgsym_2.3.0-1_arm64.deb
 eb632a8f86ba4d3095b6f005b90acb6b 7391 graphics optional openexr-viewers_2.3.0-1_arm64.buildinfo
 2a8f06fbd131a81f5b8d1fbfe631ef06 110844 graphics optional openexr-viewers_2.3.0-1_arm64.deb
Mon Aug 23 01:14:11 UTC 2021  I: diffoscope 177 will be used to compare the two builds:
# Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.n2x8m4VPBu/openexr-viewers_2.3.0-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.n2x8m4VPBu/openexr-viewers_2.3.0-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.n2x8m4VPBu/openexr-viewers_2.3.0-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.n2x8m4VPBu/b1/openexr-viewers_2.3.0-1_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.n2x8m4VPBu/b2/openexr-viewers_2.3.0-1_arm64.changes

## command (total time: 0.000s)
       0.000s      1 call     cmp (internal)

## has_same_content_as (total time: 0.000s)
       0.000s      1 call     abc.DotChangesFile

## main (total time: 7.951s)
       7.950s      2 calls    outputs
       0.000s      1 call     cleanup

## recognizes (total time: 0.578s)
       0.577s     10 calls    diffoscope.comparators.binary.FilesystemFile
       0.000s      8 calls    abc.DotChangesFile
Mon Aug 23 01:17:36 UTC 2021  I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists.
Mon Aug 23 01:17:36 UTC 2021  I: openexr-viewers from bullseye built successfully and reproducibly on arm64.
Mon Aug 23 01:17:40 UTC 2021  I: Submitting .buildinfo files to external archives:
Mon Aug 23 01:17:40 UTC 2021  I: Submitting 12K	b1/openexr-viewers_2.3.0-1_arm64.buildinfo.asc
Mon Aug 23 01:17:42 UTC 2021  I: Submitting 12K	b2/openexr-viewers_2.3.0-1_arm64.buildinfo.asc
Mon Aug 23 01:17:49 UTC 2021  I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit.
Mon Aug 23 01:17:49 UTC 2021  I: Done submitting .buildinfo files.
Mon Aug 23 01:17:49 UTC 2021  I: Removing signed openexr-viewers_2.3.0-1_arm64.buildinfo.asc files:
removed './b1/openexr-viewers_2.3.0-1_arm64.buildinfo.asc'
removed './b2/openexr-viewers_2.3.0-1_arm64.buildinfo.asc'