Thu Jul 8 23:56:56 UTC 2021 I: starting to build libcoro-perl/bullseye/arm64 on jenkins on '2021-07-08 23:56' Thu Jul 8 23:56:56 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_25/35657/console.log Thu Jul 8 23:56:56 UTC 2021 I: Downloading source for bullseye/libcoro-perl=6.570-1 --2021-07-08 23:56:56-- http://cdn-fastly.deb.debian.org/debian/pool/main/libc/libcoro-perl/libcoro-perl_6.570-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2485 (2.4K) Saving to: ‘libcoro-perl_6.570-1.dsc’ 0K .. 100% 125M=0s 2021-07-08 23:56:56 (125 MB/s) - ‘libcoro-perl_6.570-1.dsc’ saved [2485/2485] Thu Jul 8 23:56:56 UTC 2021 I: libcoro-perl_6.570-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libcoro-perl Binary: libcoro-perl Architecture: any Version: 6.570-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Xavier Guimard Homepage: https://metacpan.org/release/Coro Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcoro-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcoro-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libanyevent-perl , libcanary-stability-perl, libcommon-sense-perl , libev-perl , libevent-perl , libguard-perl , perl-xs-dev, perl:native Package-List: libcoro-perl deb perl optional arch=any Checksums-Sha1: 1ff1c7aee5cd1c31fbc50c38ab86d0ab0930417d 198128 libcoro-perl_6.570.orig.tar.gz 8e5badd1d57665368ceb8e54d77913f65d461683 7864 libcoro-perl_6.570-1.debian.tar.xz Checksums-Sha256: 1928e48033540e11ebf5506986dd101af78d2421d210f96599223b15d51714c6 198128 libcoro-perl_6.570.orig.tar.gz 88a1a8908d57e681e183196014775b3df6ace2e9c073c3f8dda3f1e0c622dd1c 7864 libcoro-perl_6.570-1.debian.tar.xz Files: fa5970a2a2f3df9d68d4369c7dde1a55 198128 libcoro-perl_6.570.orig.tar.gz e78443f21032da13eb113eab10e55a41 7864 libcoro-perl_6.570-1.debian.tar.xz Dgit: 39d1b1e061a8160004cc9ecca7ce1f53e07ff590 debian archive/debian/6.570-1 https://git.dgit.debian.org/libcoro-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAl8i9lNfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgbnrg/+K+/KBDpjHHzaNaVuAXrRRbXvfsQX9IgrmC7izT5MobLdQ+QkWi8NHJoJ 2YNXFeYkuCeumi0YLtp3FAno+LDLWY3DXHdUjhF1cgxpRFRsOMWgo55TivVCFMcF gn79hZpWBjSuHYKXmloi2PXuXmr0P5uep6doa0iS2/9fRg4nek2RcluMcYjL4zrc UvvQtZgCFn6OifbVH42h2QV5Ur2dfgusXyXEcPu/40Y2DsrrQSSqE0jFo3QFr8x9 uCdqnQiReYntLPcAhkFY2y96gQ6WyoTP5xyEk5Px10mzNv34sPmZ+MHGVJqxt5kp gcQZ4ajvg3WyvG1oFZvnY9o2HQgp8dBtvEuDEbfyIc6q3M3gaDe8gk4B7iLytrP3 PDxPk2AXLA64jp3Ym3iquDHVwLzidPttstuATW+y6NK7vaytc+IqQo4L6xvRJARU RbPfA8p2ZvFLxx2y6mdxgciJr5D14CTrjwTGvZVp7fBJ8UKEtmPeaQVBAr/1wgtk dTI3v/xaBKW0nzkn+3gL2uxk3LjyR7rGYlRBe0elP5IN10bk4Oi2AqCmoJTXiWVf na79KFV6ScWnFnx6zSBLUL6qTa2XmqxYARM+usWfHGtF32RFv7kzyR1YWfoF46Ai zfz5JNbiV1G4aaxsrEd2//873h1uSmIB82gFtxb7vvyDicc9t4s= =2b/6 -----END PGP SIGNATURE----- Thu Jul 8 23:56:56 UTC 2021 I: Checking whether the package is not for us Thu Jul 8 23:56:56 UTC 2021 I: Starting 1st build on remote node codethink15-arm64.debian.net. Thu Jul 8 23:56:56 UTC 2021 I: Preparing to do remote build '1' on codethink15-arm64.debian.net. Thu Jul 8 23:58:07 UTC 2021 I: Deleting $TMPDIR on codethink15-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Aug 10 18:19:59 -12 2022 I: pbuilder-time-stamp: 1660198799 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libcoro-perl_6.570-1.dsc] I: copying [./libcoro-perl_6.570.orig.tar.gz] I: copying [./libcoro-perl_6.570-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.I9c8wNrB/trustedkeys.kbx': General error gpgv: Signature made Thu Jul 30 04:33:23 2020 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libcoro-perl_6.570-1.dsc dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.570 dpkg-source: info: unpacking libcoro-perl_6.570.orig.tar.gz dpkg-source: info: unpacking libcoro-perl_6.570-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying whatis.patch dpkg-source: info: applying spelling.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/16931/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8' DISTRIBUTION='' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='16931' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.XaCMcm44g4/pbuilderrc_6pt9 --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.XaCMcm44g4/b1 --logfile b1/build.log libcoro-perl_6.570-1.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink15-arm64 4.15.0-147-generic #151-Ubuntu SMP Fri Jun 18 19:18:37 UTC 2021 aarch64 GNU/Linux I: ls -l /bin total 5252 -rwxr-xr-x 1 root root 1282512 Jun 21 2021 bash -rwxr-xr-x 3 root root 34808 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 14264 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 39832 Sep 22 2020 cat -rwxr-xr-x 1 root root 64512 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 60368 Sep 22 2020 chmod -rwxr-xr-x 1 root root 64528 Sep 22 2020 chown -rwxr-xr-x 1 root root 138896 Sep 22 2020 cp -rwxr-xr-x 1 root root 129544 Dec 10 2020 dash -rwxr-xr-x 1 root root 101384 Sep 22 2020 date -rwxr-xr-x 1 root root 80984 Sep 22 2020 dd -rwxr-xr-x 1 root root 89824 Sep 22 2020 df -rwxr-xr-x 1 root root 143088 Sep 22 2020 dir -rwxr-xr-x 1 root root 76152 Feb 7 2021 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 35632 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 31512 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 64856 Feb 7 2021 findmnt -rwsr-xr-x 1 root root 34824 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 178400 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 93744 Mar 2 2021 gzip -rwxr-xr-x 1 root root 18440 Nov 6 2019 hostname -rwxr-xr-x 1 root root 68720 Sep 22 2020 ln -rwxr-xr-x 1 root root 52720 Feb 7 2020 login -rwxr-xr-x 1 root root 143088 Sep 22 2020 ls -rwxr-xr-x 1 root root 161960 Feb 7 2021 lsblk -rwxr-xr-x 1 root root 85200 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 68744 Sep 22 2020 mknod -rwxr-xr-x 1 root root 43976 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 51368 Feb 7 2021 more -rwsr-xr-x 1 root root 51360 Feb 7 2021 mount -rwxr-xr-x 1 root root 14496 Feb 7 2021 mountpoint -rwxr-xr-x 1 root root 134808 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 2021 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 35720 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 2021 rbash -> bash -rwxr-xr-x 1 root root 43872 Sep 22 2020 readlink -rwxr-xr-x 1 root root 68592 Sep 22 2020 rm -rwxr-xr-x 1 root root 43880 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 19208 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 114016 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 10 03:47 sh -> dash -rwxr-xr-x 1 root root 35656 Sep 22 2020 sleep -rwxr-xr-x 1 root root 72640 Sep 22 2020 stty -rwsr-xr-x 1 root root 67776 Feb 7 2021 su -rwxr-xr-x 1 root root 35672 Sep 22 2020 sync -rwxr-xr-x 1 root root 535768 Feb 16 2021 tar -rwxr-xr-x 1 root root 10568 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 89120 Sep 22 2020 touch -rwxr-xr-x 1 root root 31512 Sep 22 2020 true -rwxr-xr-x 1 root root 14264 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 30880 Feb 7 2021 umount -rwxr-xr-x 1 root root 35640 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 143088 Sep 22 2020 vdir -rwxr-xr-x 1 root root 59584 Feb 7 2021 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/16931/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libanyevent-perl; however: Package libanyevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on libcommon-sense-perl; however: Package libcommon-sense-perl is not installed. pbuilder-satisfydepends-dummy depends on libev-perl; however: Package libev-perl is not installed. pbuilder-satisfydepends-dummy depends on libevent-perl; however: Package libevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libguard-perl; however: Package libguard-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libanyevent-perl{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libcommon-sense-perl{a} libdebhelper-perl{a} libelf1{a} libev-perl{a} libevent-perl{a} libfile-stripnondeterminism-perl{a} libguard-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libperl-dev{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libasync-interrupt-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 19.9 MB of archives. After unpacking 74.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-7 [141 kB] Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB] Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB] Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB] Get: 6 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB] Get: 9 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB] Get: 11 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB] Get: 12 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB] Get: 13 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 23 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 24 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB] Get: 25 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB] Get: 26 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB] Get: 27 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB] Get: 28 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB] Get: 29 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main arm64 libanyevent-perl arm64 7.170-2+b1 [399 kB] Get: 33 http://deb.debian.org/debian bullseye/main arm64 libcanary-stability-perl arm64 2006-2 [8772 B] Get: 34 http://deb.debian.org/debian bullseye/main arm64 libcommon-sense-perl arm64 3.75-1+b4 [24.6 kB] Get: 35 http://deb.debian.org/debian bullseye/main arm64 libev-perl arm64 4.33-1+b1 [259 kB] Get: 36 http://deb.debian.org/debian bullseye/main arm64 libevent-perl arm64 1.27-1+b2 [262 kB] Get: 37 http://deb.debian.org/debian bullseye/main arm64 libguard-perl arm64 1.023-1+b7 [15.5 kB] Get: 38 http://deb.debian.org/debian bullseye/main arm64 libperl-dev arm64 5.32.1-4 [992 kB] Fetched 19.9 MB in 1s (35.1 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-7_arm64.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../01-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_arm64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../03-libpipeline1_1.5.3-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_arm64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_arm64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../07-libmagic1_1%3a5.39-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_arm64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_arm64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:arm64. Preparing to unpack .../10-libsigsegv2_2.13-1_arm64.deb ... Unpacking libsigsegv2:arm64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_arm64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../23-libelf1_0.183-1_arm64.deb ... Unpacking libelf1:arm64 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_arm64.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:arm64. Preparing to unpack .../25-libicu67_67.1-7_arm64.deb ... Unpacking libicu67:arm64 (67.1-7) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_arm64.deb ... Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_arm64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../31-libanyevent-perl_7.170-2+b1_arm64.deb ... Unpacking libanyevent-perl (7.170-2+b1) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../32-libcanary-stability-perl_2006-2_arm64.deb ... Unpacking libcanary-stability-perl (2006-2) ... Selecting previously unselected package libcommon-sense-perl. Preparing to unpack .../33-libcommon-sense-perl_3.75-1+b4_arm64.deb ... Unpacking libcommon-sense-perl (3.75-1+b4) ... Selecting previously unselected package libev-perl. Preparing to unpack .../34-libev-perl_4.33-1+b1_arm64.deb ... Unpacking libev-perl (4.33-1+b1) ... Selecting previously unselected package libevent-perl. Preparing to unpack .../35-libevent-perl_1.27-1+b2_arm64.deb ... Unpacking libevent-perl (1.27-1+b2) ... Selecting previously unselected package libguard-perl. Preparing to unpack .../36-libguard-perl_1.023-1+b7_arm64.deb ... Unpacking libguard-perl (1.023-1+b7) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../37-libperl-dev_5.32.1-4_arm64.deb ... Unpacking libperl-dev:arm64 (5.32.1-4) ... Setting up libanyevent-perl (7.170-2+b1) ... Setting up libpipeline1:arm64 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libevent-perl (1.27-1+b2) ... Setting up libicu67:arm64 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:arm64 (1:5.39-3) ... Setting up libcommon-sense-perl (3.75-1+b4) ... Setting up gettext-base (0.21-4) ... Setting up libperl-dev:arm64 (5.32.1-4) ... Setting up file (1:5.39-3) ... Setting up libcanary-stability-perl (2006-2) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:arm64 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libev-perl (4.33-1+b1) ... Setting up libelf1:arm64 (0.183-1) ... Setting up libguard-perl (1.023-1+b7) ... Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libcoro-perl-6.570/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libcoro-perl_6.570-1_source.changes dpkg-buildpackage: info: source package libcoro-perl dpkg-buildpackage: info: source version 6.570-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.032001, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Coro. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Coro, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Coro with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Event version 1.27 found, building Event support. EV version 4.33 found, building EV support. Checking if your kit is complete... Looks good *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has a number of configuration options. Due to its maturity, the defaults that Coro chooses are usually fine, so you can decide to skip these questions. Only if something went wrong you should select 'n' here and manually configure Coro, and, of course, report this to the maintainer :) Skip further questions and use defaults (y/n)? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a number of methods to implement coroutines at the C level. The default chosen is based on your current confguration and is correct in most cases, but you still can chose between these alternatives: u The unix 'ucontext.h' functions are relatively new and not implemented or well-tested in older unices. They allow very fast coroutine creation and reasonably fast switching. They are, however, usually slower than the other alternatives due to an extra syscall done by swapcontext. And while nominally most portable (it's the only POSIX-standardised interface for coroutines), ucontext functions are, as usual, broken on most/all BSDs. s If the ucontext functions are not working or you don't want to use them for other reasons you can try a workaround using setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine creation is rather slow, but switching is very fast (often much faster than with the ucontext functions). Unfortunately, glibc-2.1 and below don't even feature a working sigaltstack. You cannot use this implementation if some other code uses SIGUSR2 or you plan to create coroutines from an alternative signal stack, as both are being used for coroutine creation. a Handcoded assembly. This is the fastest and most compatible method, with the least side effects, if it works, that is. It has been tested on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64 systems using the SVR ELF ABI (it is also reported to be working on Strawberry Perl for Windows using MinGW). This is the recommended method on supported platforms. When it doesn't work, use another method, such as (s)etjmp/longjmp. l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need this hack. Since it is very linux-specific it is also quite fast and recommended even for newer versions; when it works, that is (currently x86 and a few others only. If it compiles, it's usually ok). Newer glibc versions (>= 2.5) stop working with this implementation however. i IRIX. For some reason, SGI really does not like to follow POSIX (does that surprise you?), so this workaround might be needed (it's fast), although [s] and [u] should also work now. w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry Perl), although, as there is no standard on how to do this under windows, different environments might work differently. Doh. f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower and uses a lot more memory, but should be working all the time. p Use pthread API. Try to avoid this option, it was only created to make a point about the programming language shootout. It is unlikely to work with perls that have windows process emulation enabled ("perl threads"). It is also likely the slowest method of implementing coroutines. It might work fine as a last resort, however, as the pthread API is slightly better tested than ucontext functions for example. Of course, not on BSDs, who usually have very broken pthread implementations. Coro tries hard to come up with a suitable default for most systems, so pressing return at the prompt usually does the right thing. If you experience problems (e.g. make test fails) then you should experiment with this setting. Use which implementation, etjmp, ctx, sm, rix, inux,

threads, indows, iber? [s] s Using setjmp/longjmp/sigaltstack implementation Trying to detect stack growth direction (for TEST_sigaltstack) You might see some warnings, this should not concern you. libcoro/conftest.c: In function 'main': libcoro/conftest.c:98:28: error: storage size of 'ss' isn't known 98 | struct sigaltstack ss; | ^~ ***************************************************************************** If the testsuite fails PLEASE provide the following information to Marc Lehmann : operating system name, version, architecture name and this string '|'. Thanks a lot! ***************************************************************************** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro Writing MYMETA.yml and MYMETA.json dh_auto_build make -j8 make[1]: Entering directory '/build/libcoro-perl-6.570' make[2]: Entering directory '/build/libcoro-perl-6.570/Coro' Running Mkbootstrap for State () cp Coro/BDB.pm blib/lib/Coro/BDB.pm cp Coro/State.pm blib/lib/Coro/State.pm cp Coro/AIO.pm blib/lib/Coro/AIO.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/Select.pm blib/lib/Coro/Select.pm cp Coro/Handle.pm blib/lib/Coro/Handle.pm cp Coro/Signal.pm blib/lib/Coro/Signal.pm cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro.pm blib/lib/Coro.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl "/usr/bin/perl" "/usr/share/perl/5.32.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.32/ExtUtils/typemap' -typemap '/build/libcoro-perl-6.570/Coro/typemap' State.xs > State.xsc chmod 644 "State.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Skip ../blib/lib/Coro/Select.pm (unchanged) Skip ../blib/lib/Coro/RWLock.pm (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) Skip ../blib/lib/Coro/Semaphore.pm (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) Skip ../blib/lib/Coro/State.pm (unchanged) cp Intro.pod ../blib/lib/Coro/Intro.pod Skip ../blib/lib/Coro/Signal.pm (unchanged) Skip ../blib/lib/Coro/Timer.pm (unchanged) Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3897 mv State.xsc State.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.32/CORE" -D_FORTIFY_SOURCE=0 -DCORO_SJLJ -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c : warning: "_FORTIFY_SOURCE" redefined : note: this is the location of the previous definition rm -f ../blib/arch/auto/Coro/State/State.so aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \ \ chmod 755 ../blib/arch/auto/Coro/State/State.so Manifying 20 pod documents make[2]: Leaving directory '/build/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/libcoro-perl-6.570/Event' Running Mkbootstrap for Event () "/usr/bin/perl" "/usr/share/perl/5.32.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.32/ExtUtils/typemap' Event.xs > Event.xsc chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 cp Event.pm ../blib/lib/Coro/Event.pm mv Event.xsc Event.c aarch64-linux-gnu-gcc -c -I/usr/lib/aarch64-linux-gnu/perl5/5.32/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.32/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c rm -f ../blib/arch/auto/Coro/Event/Event.so aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \ \ chmod 755 ../blib/arch/auto/Coro/Event/Event.so Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/libcoro-perl-6.570/EV' Running Mkbootstrap for EV () "/usr/bin/perl" "/usr/share/perl/5.32.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.32/ExtUtils/typemap' EV.xs > EV.xsc chmod 644 "EV.bs" cp EV.pm ../blib/lib/Coro/EV.pm "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 mv EV.xsc EV.c aarch64-linux-gnu-gcc -c -I/usr/lib/aarch64-linux-gnu/perl5/5.32/EV -I/usr/lib/aarch64-linux-gnu/perl5/5.32 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.32/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c rm -f ../blib/arch/auto/Coro/EV/EV.so aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \ \ chmod 755 ../blib/arch/auto/Coro/EV/EV.so Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.570/EV' Manifying 20 pod documents make[1]: Leaving directory '/build/libcoro-perl-6.570' dh_auto_test make -j8 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libcoro-perl-6.570' make[2]: Entering directory '/build/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[2]: Leaving directory '/build/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.570/EV' make[2]: Entering directory '/build/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 No tests defined for Coro::State extension. make[2]: Leaving directory '/build/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 1 wallclock secs ( 0.07 usr 0.01 sys + 0.23 cusr 0.09 csys = 0.40 CPU) Result: PASS make[2]: Leaving directory '/build/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 1 wallclock secs ( 0.07 usr 0.01 sys + 0.22 cusr 0.05 csys = 0.35 CPU) Result: PASS make[2]: Leaving directory '/build/libcoro-perl-6.570/EV' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_basic.t .......... 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok t/01_process.t ........ 1..13 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok t/02_channel.t ........ 1..19 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok t/03_channel.t ........ 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/04_rwlock.t ......... 1..25 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok t/05_specific.t ....... 1..8 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok t/06_prio.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/07_eval.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/08_join.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/10_bugs.t ........... 1..3 ok 1 ok 2 ok 3 ok t/11_deadlock.t ....... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/12_exit.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/13_diewarn.t ........ 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/14_load.t ........... 1..17 ok 1 # Coro::State () ok 2 # Coro () ok 3 # Coro::MakeMaker () ok 4 # Coro::Signal () ok 5 # Coro::Semaphore () ok 6 # Coro::SemaphoreSet () ok 7 # Coro::Channel () ok 8 # Coro::Specific () ok 9 # Coro::RWLock () ok 10 # Coro::AnyEvent () ok 11 # Coro::Timer () ok 12 # Coro::Util () ok 13 # Coro::Select () ok 14 # Coro::Handle () ok 15 # Coro::Socket () ok 16 # Coro::Storable () ok 17 # Coro::Debug () ok t/15_semaphore.t ...... 1..6 ok 1 # 998 ok 2 ok 3 ok 4 ok 5 ok 6 ok t/16_signal.t ......... 1..18 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok t/17_rouse.t .......... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/18_winder.t ......... 1..17 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok t/19_handle.t ......... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/20_mutual_cancel.t .. 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok All tests successful. Files=20, Tests=206, 2 wallclock secs ( 0.19 usr 0.06 sys + 1.27 cusr 0.20 csys = 1.72 CPU) Result: PASS make[1]: Leaving directory '/build/libcoro-perl-6.570' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/libcoro-perl-6.570' dh_auto_install make -j8 install DESTDIR=/build/libcoro-perl-6.570/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/libcoro-perl-6.570' make[3]: Entering directory '/build/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[3]: Leaving directory '/build/libcoro-perl-6.570/Coro' make[3]: Entering directory '/build/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[3]: Leaving directory '/build/libcoro-perl-6.570/Event' make[3]: Entering directory '/build/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[3]: Leaving directory '/build/libcoro-perl-6.570/EV' Manifying 20 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/auto/Coro/EV/EV.so Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/auto/Coro/Event/Event.so Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/auto/Coro/State/State.so Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/EV.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Event.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Intro.pod Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/jit-x86-unix.pl Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Specific.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Timer.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/SemaphoreSet.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/LWP.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Storable.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Socket.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Debug.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Signal.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Handle.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Select.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Util.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/CoroAPI.h Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/AnyEvent.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/jit-amd64-unix.pl Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Channel.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Semaphore.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/MakeMaker.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/RWLock.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/AIO.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/State.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/BDB.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm make[2]: Leaving directory '/build/libcoro-perl-6.570' sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/libcoro-perl-6.570/debian/libcoro-perl//usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/*.pl make[1]: Leaving directory '/build/libcoro-perl-6.570' dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/libcoro-perl-6.570' dh_installexamples sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/doc/libcoro-perl/examples/* make[1]: Leaving directory '/build/libcoro-perl-6.570' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.570-1_arm64.deb'. dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.570-1_arm64.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libcoro-perl_6.570-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/16931 and its subdirectories I: Current time: Wed Aug 10 18:21:06 -12 2022 I: pbuilder-time-stamp: 1660198866 Thu Jul 8 23:58:08 UTC 2021 I: 1st build successful. Starting 2nd build on remote node codethink10-arm64.debian.net. Thu Jul 8 23:58:08 UTC 2021 I: Preparing to do remote build '2' on codethink10-arm64.debian.net. Thu Jul 8 23:59:01 UTC 2021 I: Deleting $TMPDIR on codethink10-arm64.debian.net. Thu Jul 8 23:59:02 UTC 2021 I: libcoro-perl_6.570-1_arm64.changes: Format: 1.8 Date: Thu, 30 Jul 2020 18:29:20 +0200 Source: libcoro-perl Binary: libcoro-perl libcoro-perl-dbgsym Architecture: arm64 Version: 6.570-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libcoro-perl - Perl framework implementing coroutines Changes: libcoro-perl (6.570-1) unstable; urgency=medium . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. . [ Debian Janitor ] * Remove obsolete field Name from debian/upstream/metadata (already present in machine-readable debian/copyright). * Update standards version to 4.5.0, no changes needed. . [ gregor herrmann ] * Import upstream version 6.570. * Update years of upstream and packaging copyright. * Remove contentless debian/upstream/metadata. * Set Rules-Requires-Root: no. * Bump debhelper-compat to 13. * Add another fix to spelling.patch. Checksums-Sha1: 57e1072b5ad7f59e794534b474479f698775212a 170956 libcoro-perl-dbgsym_6.570-1_arm64.deb 131b62bd3eb3e5ffa4d1e0aa816e90bfe632b40f 5098 libcoro-perl_6.570-1_arm64.buildinfo cf91447836a882a79628b400691948fa99872b28 224992 libcoro-perl_6.570-1_arm64.deb Checksums-Sha256: 5a64eb15d8f2ef6ea583def15f2c6130fe4be5935ddda2e2a4953e2b064668ab 170956 libcoro-perl-dbgsym_6.570-1_arm64.deb b8c7176dcfe40f8c0ae6a056e4dfa85c70f0b98bb763c83b0716a134ba9852aa 5098 libcoro-perl_6.570-1_arm64.buildinfo 5fa447b8a5685189a39820ead6a9beac577bced9d1bd2d5efc551249dee63708 224992 libcoro-perl_6.570-1_arm64.deb Files: 16e2a15a5578b46f3a5f1c65f2b93ffc 170956 debug optional libcoro-perl-dbgsym_6.570-1_arm64.deb 15a6a34f921b912fb9ae9725600c8dd3 5098 perl optional libcoro-perl_6.570-1_arm64.buildinfo 5efb083472d9cd6af56bf149d084f365 224992 perl optional libcoro-perl_6.570-1_arm64.deb Thu Jul 8 23:59:03 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.XaCMcm44g4/libcoro-perl_6.570-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.XaCMcm44g4/libcoro-perl_6.570-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.XaCMcm44g4/libcoro-perl_6.570-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.XaCMcm44g4/b1/libcoro-perl_6.570-1_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.XaCMcm44g4/b2/libcoro-perl_6.570-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.242s) 0.242s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.021s) 0.021s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Thu Jul 8 23:59:04 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Thu Jul 8 23:59:04 UTC 2021 I: libcoro-perl from bullseye built successfully and reproducibly on arm64. Thu Jul 8 23:59:05 UTC 2021 I: Submitting .buildinfo files to external archives: Thu Jul 8 23:59:06 UTC 2021 I: Submitting 8.0K b1/libcoro-perl_6.570-1_arm64.buildinfo.asc Thu Jul 8 23:59:07 UTC 2021 I: Submitting 8.0K b2/libcoro-perl_6.570-1_arm64.buildinfo.asc Thu Jul 8 23:59:07 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Jul 8 23:59:07 UTC 2021 I: Done submitting .buildinfo files. Thu Jul 8 23:59:07 UTC 2021 I: Removing signed libcoro-perl_6.570-1_arm64.buildinfo.asc files: removed './b1/libcoro-perl_6.570-1_arm64.buildinfo.asc' removed './b2/libcoro-perl_6.570-1_arm64.buildinfo.asc'