Sun Apr 30 00:49:44 UTC 2023 I: starting to build sipsak/bookworm/armhf on jenkins on '2023-04-30 00:49' Sun Apr 30 00:49:44 UTC 2023 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_20/5433/console.log Sun Apr 30 00:49:44 UTC 2023 I: Downloading source for bookworm/sipsak=0.9.8.1-1 --2023-04-30 00:49:44-- http://cdn-fastly.deb.debian.org/debian/pool/main/s/sipsak/sipsak_0.9.8.1-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1638 (1.6K) [text/prs.lines.tag] Saving to: ‘sipsak_0.9.8.1-1.dsc’ 0K . 100% 84.3M=0s 2023-04-30 00:49:45 (84.3 MB/s) - ‘sipsak_0.9.8.1-1.dsc’ saved [1638/1638] Sun Apr 30 00:49:45 UTC 2023 I: sipsak_0.9.8.1-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: sipsak Binary: sipsak Architecture: any Version: 0.9.8.1-1 Maintainer: Debian VoIP Team Uploaders: Victor Seva , Homepage: https://github.com/nils-ohlmeier/sipsak Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/pkg-voip-team/sipsak Vcs-Git: https://salsa.debian.org/pkg-voip-team/sipsak.git Build-Depends: check, debhelper-compat (= 12), libc-ares-dev, libgnutls-openssl-dev, pkg-config Package-List: sipsak deb net optional arch=any Checksums-Sha1: fa1e2085aca9f8bcdf238e4d71518912a2b2eecc 72679 sipsak_0.9.8.1.orig.tar.gz 8ff333f7b3dd919461ed9aedc1f4307a6822071d 3960 sipsak_0.9.8.1-1.debian.tar.xz Checksums-Sha256: ffcb116c4bcce58c165f1b4644debf9cb973f9239a5fc1c3cf37328549f13c91 72679 sipsak_0.9.8.1.orig.tar.gz dd73e71027d38f979f2eb0eb4fa838d4e36569b9a374e145ff90bff362ba6c85 3960 sipsak_0.9.8.1-1.debian.tar.xz Files: b07780ef654cfe1687d6ecc7f617bc7a 72679 sipsak_0.9.8.1.orig.tar.gz 2f8f4603a5bc61d78278cf717d7761a7 3960 sipsak_0.9.8.1-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQFFBAEBCgAvFiEEDmBQEMrYIhRFqKAgIXSmjn2oLMcFAmAg+HwRHHZzZXZhQGRl Ymlhbi5vcmcACgkQIXSmjn2oLMfzPAgAij+5R6og0O6CGUWCaKIPJ3exoJ8yFuW3 bi7/Po5SAz0TUziyK+nGWJAtVd3062Y2toKAnHoxwpZj8hdP0zsEontUGFqkwGuJ z6Gz64M9x9uQF5dKsUF5jGp1Z4rh1nzhV76zgoGlSbt74HwG18i+9jEOVJrqaGQt f3GbFS4fi4N39/DrtLKtMOEhBM5L4QRX9CiyGsPMQP7MAhTt8eLHnHPi29IEeZAp nGBJ0kNbekC5AgSjFz9y2MXUJb14lKiaQQr2+bwwwy4IBb+HN8o1PPoE49Oz9eR5 0n3VGFjWua0B3yKo4hyfBHQoBv+HvAOylqyMWgGemrOMeuipuM7Lmw== =7pSY -----END PGP SIGNATURE----- Sun Apr 30 00:49:45 UTC 2023 I: Checking whether the package is not for us Sun Apr 30 00:49:45 UTC 2023 I: Starting 1st build on remote node cbxi4a-armhf-rb.debian.net. Sun Apr 30 00:49:45 UTC 2023 I: Preparing to do remote build '1' on cbxi4a-armhf-rb.debian.net. Sun Apr 30 01:04:02 UTC 2023 I: Deleting $TMPDIR on cbxi4a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Apr 29 12:49:56 -12 2023 I: pbuilder-time-stamp: 1682815796 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [sipsak_0.9.8.1-1.dsc] I: copying [./sipsak_0.9.8.1.orig.tar.gz] I: copying [./sipsak_0.9.8.1-1.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Feb 7 20:38:20 2021 -12 gpgv: using RSA key 0E605010CAD8221445A8A0202174A68E7DA82CC7 gpgv: issuer "vseva@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./sipsak_0.9.8.1-1.dsc: no acceptable signature found dpkg-source: info: extracting sipsak in sipsak-0.9.8.1 dpkg-source: info: unpacking sipsak_0.9.8.1.orig.tar.gz dpkg-source: info: unpacking sipsak_0.9.8.1-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/20691/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3' DISTRIBUTION='bookworm' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='dec11a012d08459a8f1bc59f00197dec' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='20691' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.dspx21bB/pbuilderrc_6v5y --distribution bookworm --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.dspx21bB/b1 --logfile b1/build.log sipsak_0.9.8.1-1.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux cbxi4a 5.10.0-21-armmp #1 SMP Debian 5.10.162-1 (2023-01-21) armv7l GNU/Linux I: ls -l /bin total 5072 -rwxr-xr-x 1 root root 838488 Apr 23 09:24 bash -rwxr-xr-x 3 root root 67144 Sep 18 2022 bunzip2 -rwxr-xr-x 3 root root 67144 Sep 18 2022 bzcat lrwxrwxrwx 1 root root 6 Sep 18 2022 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Sep 18 2022 bzdiff lrwxrwxrwx 1 root root 6 Sep 18 2022 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4893 Nov 27 2021 bzexe lrwxrwxrwx 1 root root 6 Sep 18 2022 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Sep 18 2022 bzgrep -rwxr-xr-x 3 root root 67144 Sep 18 2022 bzip2 -rwxr-xr-x 1 root root 67112 Sep 18 2022 bzip2recover lrwxrwxrwx 1 root root 6 Sep 18 2022 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Sep 18 2022 bzmore -rwxr-xr-x 1 root root 67632 Sep 20 2022 cat -rwxr-xr-x 1 root root 67676 Sep 20 2022 chgrp -rwxr-xr-x 1 root root 67644 Sep 20 2022 chmod -rwxr-xr-x 1 root root 67684 Sep 20 2022 chown -rwxr-xr-x 1 root root 133532 Sep 20 2022 cp -rwxr-xr-x 1 root root 132868 Jan 5 01:20 dash -rwxr-xr-x 1 root root 133220 Sep 20 2022 date -rwxr-xr-x 1 root root 67732 Sep 20 2022 dd -rwxr-xr-x 1 root root 68104 Sep 20 2022 df -rwxr-xr-x 1 root root 133632 Sep 20 2022 dir -rwxr-xr-x 1 root root 59128 Mar 22 21:02 dmesg lrwxrwxrwx 1 root root 8 Dec 19 01:33 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Dec 19 01:33 domainname -> hostname -rwxr-xr-x 1 root root 67560 Sep 20 2022 echo -rwxr-xr-x 1 root root 41 Jan 24 02:43 egrep -rwxr-xr-x 1 root root 67548 Sep 20 2022 false -rwxr-xr-x 1 root root 41 Jan 24 02:43 fgrep -rwxr-xr-x 1 root root 55748 Mar 22 21:02 findmnt -rwsr-xr-x 1 root root 26208 Mar 22 20:15 fusermount -rwxr-xr-x 1 root root 128608 Jan 24 02:43 grep -rwxr-xr-x 2 root root 2346 Apr 9 2022 gunzip -rwxr-xr-x 1 root root 6447 Apr 9 2022 gzexe -rwxr-xr-x 1 root root 64220 Apr 9 2022 gzip -rwxr-xr-x 1 root root 67032 Dec 19 01:33 hostname -rwxr-xr-x 1 root root 67720 Sep 20 2022 ln -rwxr-xr-x 1 root root 35132 Mar 22 21:51 login -rwxr-xr-x 1 root root 133632 Sep 20 2022 ls -rwxr-xr-x 1 root root 136808 Mar 22 21:02 lsblk -rwxr-xr-x 1 root root 67800 Sep 20 2022 mkdir -rwxr-xr-x 1 root root 67764 Sep 20 2022 mknod -rwxr-xr-x 1 root root 67596 Sep 20 2022 mktemp -rwxr-xr-x 1 root root 38504 Mar 22 21:02 more -rwsr-xr-x 1 root root 38496 Mar 22 21:02 mount -rwxr-xr-x 1 root root 9824 Mar 22 21:02 mountpoint -rwxr-xr-x 1 root root 133532 Sep 20 2022 mv lrwxrwxrwx 1 root root 8 Dec 19 01:33 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 2 18:25 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 67608 Sep 20 2022 pwd lrwxrwxrwx 1 root root 4 Apr 23 09:24 rbash -> bash -rwxr-xr-x 1 root root 67600 Sep 20 2022 readlink -rwxr-xr-x 1 root root 67672 Sep 20 2022 rm -rwxr-xr-x 1 root root 67600 Sep 20 2022 rmdir -rwxr-xr-x 1 root root 67400 Nov 2 04:31 run-parts -rwxr-xr-x 1 root root 133372 Jan 5 07:55 sed lrwxrwxrwx 1 root root 4 Jan 5 01:20 sh -> dash -rwxr-xr-x 1 root root 67584 Sep 20 2022 sleep -rwxr-xr-x 1 root root 67644 Sep 20 2022 stty -rwsr-xr-x 1 root root 50800 Mar 22 21:02 su -rwxr-xr-x 1 root root 67584 Sep 20 2022 sync -rwxr-xr-x 1 root root 336764 Apr 6 02:25 tar -rwxr-xr-x 1 root root 67144 Nov 2 04:31 tempfile -rwxr-xr-x 1 root root 133224 Sep 20 2022 touch -rwxr-xr-x 1 root root 67548 Sep 20 2022 true -rwxr-xr-x 1 root root 9768 Mar 22 20:15 ulockmgr_server -rwsr-xr-x 1 root root 22108 Mar 22 21:02 umount -rwxr-xr-x 1 root root 67572 Sep 20 2022 uname -rwxr-xr-x 2 root root 2346 Apr 9 2022 uncompress -rwxr-xr-x 1 root root 133632 Sep 20 2022 vdir -rwxr-xr-x 1 root root 42608 Mar 22 21:02 wdctl lrwxrwxrwx 1 root root 8 Dec 19 01:33 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Apr 9 2022 zcat -rwxr-xr-x 1 root root 1678 Apr 9 2022 zcmp -rwxr-xr-x 1 root root 6460 Apr 9 2022 zdiff -rwxr-xr-x 1 root root 29 Apr 9 2022 zegrep -rwxr-xr-x 1 root root 29 Apr 9 2022 zfgrep -rwxr-xr-x 1 root root 2081 Apr 9 2022 zforce -rwxr-xr-x 1 root root 8103 Apr 9 2022 zgrep -rwxr-xr-x 1 root root 2206 Apr 9 2022 zless -rwxr-xr-x 1 root root 1842 Apr 9 2022 zmore -rwxr-xr-x 1 root root 4577 Apr 9 2022 znew I: user script /srv/workspace/pbuilder/20691/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: check, debhelper-compat (= 12), libc-ares-dev, libgnutls-openssl-dev, pkg-config dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19329 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on check; however: Package check is not installed. pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libc-ares-dev; however: Package libc-ares-dev is not installed. pbuilder-satisfydepends-dummy depends on libgnutls-openssl-dev; however: Package libgnutls-openssl-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} check{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libc-ares-dev{a} libc-ares2{a} libdebhelper-perl{a} libelf1{a} libevent-2.1-7{a} libfile-stripnondeterminism-perl{a} libgmp-dev{a} libgmpxx4ldbl{a} libgnutls-dane0{a} libgnutls-openssl27{a} libgnutls28-dev{a} libgnutlsxx30{a} libicu72{a} libidn2-dev{a} libmagic-mgc{a} libmagic1{a} libp11-kit-dev{a} libpipeline1{a} libpkgconf3{a} libsub-override-perl{a} libsubunit-dev{a} libsubunit0{a} libtasn1-6-dev{a} libtool{a} libuchardet0{a} libunbound8{a} libxml2{a} m4{a} man-db{a} nettle-dev{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libtasn1-doc lynx wget 0 packages upgraded, 51 newly installed, 0 to remove and 0 not upgraded. Need to get 23.9 MB of archives. After unpacking 80.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bookworm/main armhf sensible-utils all 0.0.17+nmu1 [19.0 kB] Get: 2 http://deb.debian.org/debian bookworm/main armhf libmagic-mgc armhf 1:5.44-3 [305 kB] Get: 3 http://deb.debian.org/debian bookworm/main armhf libmagic1 armhf 1:5.44-3 [96.5 kB] Get: 4 http://deb.debian.org/debian bookworm/main armhf file armhf 1:5.44-3 [41.6 kB] Get: 5 http://deb.debian.org/debian bookworm/main armhf gettext-base armhf 0.21-12 [157 kB] Get: 6 http://deb.debian.org/debian bookworm/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 7 http://deb.debian.org/debian bookworm/main armhf groff-base armhf 1.22.4-10 [825 kB] Get: 8 http://deb.debian.org/debian bookworm/main armhf bsdextrautils armhf 2.38.1-5+b1 [78.6 kB] Get: 9 http://deb.debian.org/debian bookworm/main armhf libpipeline1 armhf 1.5.7-1 [33.6 kB] Get: 10 http://deb.debian.org/debian bookworm/main armhf man-db armhf 2.11.2-2 [1351 kB] Get: 11 http://deb.debian.org/debian bookworm/main armhf m4 armhf 1.4.19-3 [265 kB] Get: 12 http://deb.debian.org/debian bookworm/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian bookworm/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian bookworm/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian bookworm/main armhf autopoint all 0.21-12 [495 kB] Get: 16 http://deb.debian.org/debian bookworm/main armhf libsubunit0 armhf 1.4.0-3 [9516 B] Get: 17 http://deb.debian.org/debian bookworm/main armhf libsubunit-dev armhf 1.4.0-3 [10.6 kB] Get: 18 http://deb.debian.org/debian bookworm/main armhf check armhf 0.15.2-2+b1 [109 kB] Get: 19 http://deb.debian.org/debian bookworm/main armhf libdebhelper-perl all 13.11.4 [81.2 kB] Get: 20 http://deb.debian.org/debian bookworm/main armhf libtool all 2.4.7-5 [517 kB] Get: 21 http://deb.debian.org/debian bookworm/main armhf dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian bookworm/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian bookworm/main armhf libsub-override-perl all 0.09-4 [9304 B] Get: 24 http://deb.debian.org/debian bookworm/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 25 http://deb.debian.org/debian bookworm/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 26 http://deb.debian.org/debian bookworm/main armhf libelf1 armhf 0.188-2.1 [170 kB] Get: 27 http://deb.debian.org/debian bookworm/main armhf dwz armhf 0.15-1 [101 kB] Get: 28 http://deb.debian.org/debian bookworm/main armhf libicu72 armhf 72.1-3 [9048 kB] Get: 29 http://deb.debian.org/debian bookworm/main armhf libxml2 armhf 2.9.14+dfsg-1.2 [591 kB] Get: 30 http://deb.debian.org/debian bookworm/main armhf gettext armhf 0.21-12 [1229 kB] Get: 31 http://deb.debian.org/debian bookworm/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 32 http://deb.debian.org/debian bookworm/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 33 http://deb.debian.org/debian bookworm/main armhf debhelper all 13.11.4 [942 kB] Get: 34 http://deb.debian.org/debian bookworm/main armhf libc-ares2 armhf 1.18.1-2 [95.3 kB] Get: 35 http://deb.debian.org/debian bookworm/main armhf libc-ares-dev armhf 1.18.1-2 [185 kB] Get: 36 http://deb.debian.org/debian bookworm/main armhf libevent-2.1-7 armhf 2.1.12-stable-8 [161 kB] Get: 37 http://deb.debian.org/debian bookworm/main armhf libgmpxx4ldbl armhf 2:6.2.1+dfsg1-1.1 [338 kB] Get: 38 http://deb.debian.org/debian bookworm/main armhf libgmp-dev armhf 2:6.2.1+dfsg1-1.1 [593 kB] Get: 39 http://deb.debian.org/debian bookworm/main armhf libunbound8 armhf 1.17.1-2 [488 kB] Get: 40 http://deb.debian.org/debian bookworm/main armhf libgnutls-dane0 armhf 3.7.9-2 [399 kB] Get: 41 http://deb.debian.org/debian bookworm/main armhf libgnutls-openssl27 armhf 3.7.9-2 [399 kB] Get: 42 http://deb.debian.org/debian bookworm/main armhf libgnutlsxx30 armhf 3.7.9-2 [12.2 kB] Get: 43 http://deb.debian.org/debian bookworm/main armhf libidn2-dev armhf 2.3.3-1+b1 [118 kB] Get: 44 http://deb.debian.org/debian bookworm/main armhf libp11-kit-dev armhf 0.24.1-2 [172 kB] Get: 45 http://deb.debian.org/debian bookworm/main armhf libtasn1-6-dev armhf 4.19.0-2 [101 kB] Get: 46 http://deb.debian.org/debian bookworm/main armhf nettle-dev armhf 3.8.1-2 [1237 kB] Get: 47 http://deb.debian.org/debian bookworm/main armhf libgnutls28-dev armhf 3.7.9-2 [1285 kB] Get: 48 http://deb.debian.org/debian bookworm/main armhf libpkgconf3 armhf 1.8.1-1 [31.3 kB] Get: 49 http://deb.debian.org/debian bookworm/main armhf pkgconf-bin armhf 1.8.1-1 [28.5 kB] Get: 50 http://deb.debian.org/debian bookworm/main armhf pkgconf armhf 1.8.1-1 [25.9 kB] Get: 51 http://deb.debian.org/debian bookworm/main armhf pkg-config armhf 1.8.1-1 [13.7 kB] Fetched 23.9 MB in 7s (3421 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19329 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_armhf.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../02-libmagic1_1%3a5.44-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.44-3_armhf.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-12_armhf.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.22.4-10_armhf.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.38.1-5+b1_armhf.deb ... Unpacking bsdextrautils (2.38.1-5+b1) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.11.2-2_armhf.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-3_armhf.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libsubunit0:armhf. Preparing to unpack .../15-libsubunit0_1.4.0-3_armhf.deb ... Unpacking libsubunit0:armhf (1.4.0-3) ... Selecting previously unselected package libsubunit-dev:armhf. Preparing to unpack .../16-libsubunit-dev_1.4.0-3_armhf.deb ... Unpacking libsubunit-dev:armhf (1.4.0-3) ... Selecting previously unselected package check:armhf. Preparing to unpack .../17-check_0.15.2-2+b1_armhf.deb ... Unpacking check:armhf (0.15.2-2+b1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../22-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../25-libelf1_0.188-2.1_armhf.deb ... Unpacking libelf1:armhf (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.15-1_armhf.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../27-libicu72_72.1-3_armhf.deb ... Unpacking libicu72:armhf (72.1-3) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../28-libxml2_2.9.14+dfsg-1.2_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.21-12_armhf.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package libc-ares2:armhf. Preparing to unpack .../33-libc-ares2_1.18.1-2_armhf.deb ... Unpacking libc-ares2:armhf (1.18.1-2) ... Selecting previously unselected package libc-ares-dev:armhf. Preparing to unpack .../34-libc-ares-dev_1.18.1-2_armhf.deb ... Unpacking libc-ares-dev:armhf (1.18.1-2) ... Selecting previously unselected package libevent-2.1-7:armhf. Preparing to unpack .../35-libevent-2.1-7_2.1.12-stable-8_armhf.deb ... Unpacking libevent-2.1-7:armhf (2.1.12-stable-8) ... Selecting previously unselected package libgmpxx4ldbl:armhf. Preparing to unpack .../36-libgmpxx4ldbl_2%3a6.2.1+dfsg1-1.1_armhf.deb ... Unpacking libgmpxx4ldbl:armhf (2:6.2.1+dfsg1-1.1) ... Selecting previously unselected package libgmp-dev:armhf. Preparing to unpack .../37-libgmp-dev_2%3a6.2.1+dfsg1-1.1_armhf.deb ... Unpacking libgmp-dev:armhf (2:6.2.1+dfsg1-1.1) ... Selecting previously unselected package libunbound8:armhf. Preparing to unpack .../38-libunbound8_1.17.1-2_armhf.deb ... Unpacking libunbound8:armhf (1.17.1-2) ... Selecting previously unselected package libgnutls-dane0:armhf. Preparing to unpack .../39-libgnutls-dane0_3.7.9-2_armhf.deb ... Unpacking libgnutls-dane0:armhf (3.7.9-2) ... Selecting previously unselected package libgnutls-openssl27:armhf. Preparing to unpack .../40-libgnutls-openssl27_3.7.9-2_armhf.deb ... Unpacking libgnutls-openssl27:armhf (3.7.9-2) ... Selecting previously unselected package libgnutlsxx30:armhf. Preparing to unpack .../41-libgnutlsxx30_3.7.9-2_armhf.deb ... Unpacking libgnutlsxx30:armhf (3.7.9-2) ... Selecting previously unselected package libidn2-dev:armhf. Preparing to unpack .../42-libidn2-dev_2.3.3-1+b1_armhf.deb ... Unpacking libidn2-dev:armhf (2.3.3-1+b1) ... Selecting previously unselected package libp11-kit-dev:armhf. Preparing to unpack .../43-libp11-kit-dev_0.24.1-2_armhf.deb ... Unpacking libp11-kit-dev:armhf (0.24.1-2) ... Selecting previously unselected package libtasn1-6-dev:armhf. Preparing to unpack .../44-libtasn1-6-dev_4.19.0-2_armhf.deb ... Unpacking libtasn1-6-dev:armhf (4.19.0-2) ... Selecting previously unselected package nettle-dev:armhf. Preparing to unpack .../45-nettle-dev_3.8.1-2_armhf.deb ... Unpacking nettle-dev:armhf (3.8.1-2) ... Selecting previously unselected package libgnutls28-dev:armhf. Preparing to unpack .../46-libgnutls28-dev_3.7.9-2_armhf.deb ... Unpacking libgnutls28-dev:armhf (3.7.9-2) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../47-libpkgconf3_1.8.1-1_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../48-pkgconf-bin_1.8.1-1_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../49-pkgconf_1.8.1-1_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1) ... Selecting previously unselected package pkg-config:armhf. Preparing to unpack .../50-pkg-config_1.8.1-1_armhf.deb ... Unpacking pkg-config:armhf (1.8.1-1) ... Setting up libpipeline1:armhf (1.5.7-1) ... Setting up libgnutls-openssl27:armhf (3.7.9-2) ... Setting up libicu72:armhf (72.1-3) ... Setting up bsdextrautils (2.38.1-5+b1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libmagic1:armhf (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up libc-ares2:armhf (1.18.1-2) ... Setting up file (1:5.44-3) ... Setting up libsubunit0:armhf (1.4.0-3) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:armhf (1.8.1-1) ... Setting up libgmpxx4ldbl:armhf (2:6.2.1+dfsg1-1.1) ... Setting up libgnutlsxx30:armhf (3.7.9-2) ... Setting up libc-ares-dev:armhf (1.18.1-2) ... Setting up libevent-2.1-7:armhf (2.1.12-stable-8) ... Setting up autopoint (0.21-12) ... Setting up pkgconf-bin (1.8.1-1) ... Setting up libidn2-dev:armhf (2.3.3-1+b1) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libsub-override-perl (0.09-4) ... Setting up libtasn1-6-dev:armhf (4.19.0-2) ... Setting up libelf1:armhf (0.188-2.1) ... Setting up libxml2:armhf (2.9.14+dfsg-1.2) ... Setting up libp11-kit-dev:armhf (0.24.1-2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-12) ... Setting up libgmp-dev:armhf (2:6.2.1+dfsg1-1.1) ... Setting up nettle-dev:armhf (3.8.1-2) ... Setting up libtool (2.4.7-5) ... Setting up libsubunit-dev:armhf (1.4.0-3) ... Setting up pkgconf:armhf (1.8.1-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libunbound8:armhf (1.17.1-2) ... Setting up check:armhf (0.15.2-2+b1) ... Setting up pkg-config:armhf (1.8.1-1) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up libgnutls-dane0:armhf (3.7.9-2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.11.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libgnutls28-dev:armhf (3.7.9-2) ... Setting up debhelper (13.11.4) ... Processing triggers for libc-bin (2.36-9) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.31-1.2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/sipsak-0.9.8.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../sipsak_0.9.8.1-1_source.changes dpkg-buildpackage: info: source package sipsak dpkg-buildpackage: info: source version 0.9.8.1-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Victor Seva dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_auto_clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf configure.ac:9: warning: The macro `AC_CONFIG_HEADER' is obsolete. configure.ac:9: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.ac:9: the top level configure.ac:36: warning: The macro `AC_HEADER_STDC' is obsolete. configure.ac:36: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.ac:36: the top level configure.ac:40: warning: The macro `AC_HEADER_TIME' is obsolete. configure.ac:40: You should run autoupdate. ./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from... configure.ac:40: the top level configure.ac:12: installing './compile' configure.ac:23: installing './config.guess' configure.ac:23: installing './config.sub' configure.ac:6: installing './install-sh' configure.ac:6: installing './missing' Makefile.am: installing './INSTALL' Makefile.am: installing './depcomp' parallel-tests: installing './test-driver' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/sipsak-0.9.8.1' dh_auto_configure -- --disable-raw-support ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --disable-raw-support checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... unsupported checking for gcc option to enable C99 features... unsupported checking for gcc option to enable C89 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking whether gcc accepts -fstack-protector... yes checking whether to use distcc... not requested checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for sys/time.h... yes checking for sys/select.h... yes checking for sys/socket.h... yes checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ctype.h... yes checking for errno.h... yes checking for arpa/inet.h... yes checking for netdb.h... yes checking for netinet/in.h... yes checking for netinet/in_systm.h... yes checking for limits.h... yes checking for sys/poll.h... yes checking for regex.h... yes checking for signal.h... yes checking for stdarg.h... yes checking for stdlib.h... (cached) yes checking for stdio.h... (cached) yes checking for string.h... (cached) yes checking for sys/param.h... yes checking for sys/socket.h... (cached) yes checking for sys/time.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/utsname.h... yes checking for getopt.h... yes checking for syslog.h... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for netinet/ip.h... yes checking for netinet/udp.h... yes checking for netinet/ip_icmp.h... yes checking for cygwin/icmp.h... no checking raw socket support... no checking for size_t... yes checking for GNU libc compatible malloc... yes checking types of arguments for select... int,fd_set *,struct timeval * checking for getchar... yes checking for gethostbyname... yes checking for gethostname... yes checking for getopt... yes checking for getpid... yes checking for gettimeofday... yes checking for memset... yes checking for ntohs... yes checking for regcomp... yes checking for select... yes checking for socket... yes checking for strchr... yes checking for strcmp... yes checking for strstr... yes checking for strtol... yes checking for uname... yes checking for calloc... yes checking for getdomainname... yes checking for getopt_long... yes checking for inet_ntop... yes checking for strncasecmp... yes checking for strcasestr... yes checking for syslog... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for check >= 0.9.3... yes checking for gnutls >= 1.0.0... yes checking for gnutls >= 3.1.9... yes checking for gnutls_srp_verifier in -lgnutls... yes checking for libcares... yes checking for arpa/nameser.h... yes checking oldstyle numeric... not requested checking disable TLS... not requested checking enable debug messages... not requested checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands make[1]: Leaving directory '/build/sipsak-0.9.8.1' dh_auto_build make -j3 make[1]: Entering directory '/build/sipsak-0.9.8.1' make all-am make[2]: Entering directory '/build/sipsak-0.9.8.1' gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/transport.o src/transport.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/auth.o src/auth.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/header_f.o src/header_f.c src/transport.c: In function 'gnutls_session_info': src/transport.c:504:9: warning: 'gnutls_compression_get_name' is deprecated [-Wdeprecated-declarations] 504 | tmp = gnutls_compression_get_name(gnutls_compression_get(session)); | ^~~ In file included from /usr/include/gnutls/gnutls.h:3681, from src/sipsak.h:77, from src/transport.c:16: /usr/include/gnutls/compat.h:228:1: note: declared here 228 | gnutls_compression_get_name(gnutls_compression_method_t | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ src/transport.c:504:9: warning: 'gnutls_compression_get' is deprecated [-Wdeprecated-declarations] 504 | tmp = gnutls_compression_get_name(gnutls_compression_get(session)); | ^~~ /usr/include/gnutls/compat.h:225:1: note: declared here 225 | gnutls_compression_get(gnutls_session_t session) _GNUTLS_GCC_ATTR_DEPRECATED; | ^~~~~~~~~~~~~~~~~~~~~~ src/header_f.c: In function 'insert_header': src/header_f.c:43:9: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 43 | strncpy(backup, ins, strlen(ins)); | ^ src/header_f.c:43:9: note: length computed here 43 | strncpy(backup, ins, strlen(ins)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:44:9: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 44 | strncpy(ins, header, strlen(header)); | ^ src/header_f.c:44:9: note: length computed here 44 | strncpy(ins, header, strlen(header)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:45:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 45 | strncpy(ins + strlen(header), backup, strlen(backup)+1); | ^ src/header_f.c:45:47: note: length computed here 45 | strncpy(ins + strlen(header), backup, strlen(backup)+1); | ^~~~~~~~~~~~~~ src/auth.c: In function 'insert_auth': src/auth.c:101:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 101 | strncpy(backup, insert, strlen(insert)); | ^ src/auth.c:101:9: note: length computed here 101 | strncpy(backup, insert, strlen(insert)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/auth.c:408:17: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 408 | strncpy(insert, backup, strlen(backup)); | ^ src/auth.c:408:17: note: length computed here 408 | strncpy(insert, backup, strlen(backup)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c: In function 'add_via': src/header_f.c:84:9: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 84 | strncpy(backup, via, strlen(via)); | ^ src/header_f.c:84:9: note: length computed here 84 | strncpy(backup, via, strlen(via)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:85:9: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 85 | strncpy(via, via_line, strlen(via_line)); | ^ src/header_f.c:85:9: note: length computed here 85 | strncpy(via, via_line, strlen(via_line)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:86:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 86 | strncpy(via+strlen(via_line), backup, strlen(backup)+1); | ^ src/header_f.c:86:47: note: length computed here 86 | strncpy(via+strlen(via_line), backup, strlen(backup)+1); | ^~~~~~~~~~~~~~ src/header_f.c: In function 'set_maxforw': src/header_f.c:200:17: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 200 | strncpy(backup, crlfi, strlen(crlfi)); | ^ src/header_f.c:200:17: note: length computed here 200 | strncpy(backup, crlfi, strlen(crlfi)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:212:17: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 212 | strncpy(crlfi, backup, strlen(backup)+1); | ^ src/header_f.c:212:40: note: length computed here 212 | strncpy(crlfi, backup, strlen(backup)+1); | ^~~~~~~~~~~~~~ src/header_f.c:178:17: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 178 | strncpy(backup, max, (size_t)(strlen(max))); | ^ src/header_f.c:178:47: note: length computed here 178 | strncpy(backup, max, (size_t)(strlen(max))); | ~^~~~~~~~~~~~ src/header_f.c:188:17: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 188 | strncpy(max, backup, strlen(backup)+1); | ^ src/header_f.c:188:38: note: length computed here 188 | strncpy(max, backup, strlen(backup)+1); | ^~~~~~~~~~~~~~ src/header_f.c: In function 'uri_replace': src/header_f.c:236:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 10 bytes from a string of the same length [-Wstringop-truncation] 236 | strncpy(foo+strlen(uri), SIP20_STR, SIP20_STR_LEN); | ^ src/header_f.c:233:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 233 | strncpy(backup, foo, strlen(foo)); | ^ src/header_f.c:233:9: note: length computed here 233 | strncpy(backup, foo, strlen(foo)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:235:9: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 235 | strncpy(foo, uri, strlen(uri)); | ^ src/header_f.c:235:9: note: length computed here 235 | strncpy(foo, uri, strlen(uri)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:237:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 237 | strncpy(foo+strlen(uri)+SIP20_STR_LEN, backup, strlen(backup)+1); | ^ src/header_f.c:237:56: note: length computed here 237 | strncpy(foo+strlen(uri)+SIP20_STR_LEN, backup, strlen(backup)+1); | ^~~~~~~~~~~~~~ src/header_f.c: In function 'set_cl': src/header_f.c:258:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 258 | strncpy(backup, cr, strlen(cr)); | ^ gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/helper.o src/helper.c src/header_f.c:258:9: note: length computed here 258 | strncpy(backup, cr, strlen(cr)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:266:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 266 | strncpy(cr, backup, strlen(backup)+1); | ^ src/header_f.c:266:29: note: length computed here 266 | strncpy(cr, backup, strlen(backup)+1); | ^~~~~~~~~~~~~~ src/header_f.c: In function 'cpy_rr': src/header_f.c:335:33: warning: '__builtin_strncpy' output truncated before terminating nul copying 14 bytes from a string of the same length [-Wstringop-truncation] 335 | strncpy(cr, RR_STR, RR_STR_LEN); | ^ src/header_f.c:338:33: warning: '__builtin_strncpy' output truncated before terminating nul copying 7 bytes from a string of the same length [-Wstringop-truncation] 338 | strncpy(cr, ROUTE_STR, ROUTE_STR_LEN); | ^ src/header_f.c:328:17: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 328 | strncpy(backup, cr, strlen(cr)); | ^ src/header_f.c:328:17: note: length computed here 328 | strncpy(backup, cr, strlen(cr)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:350:17: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 350 | strncpy(cr, backup, strlen(backup)+1); | ^ src/header_f.c:350:37: note: length computed here 350 | strncpy(cr, backup, strlen(backup)+1); | ^~~~~~~~~~~~~~ src/header_f.c: In function 'increase_cseq': src/header_f.c:456:17: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 456 | strncpy(backup, eol, (size_t)(strlen(eol))); | ^ src/header_f.c:456:47: note: length computed here 456 | strncpy(backup, eol, (size_t)(strlen(eol))); | ~^~~~~~~~~~~~ src/header_f.c:457:39: warning: ' ' directive output may be truncated writing 1 byte into a region of size between 0 and 10 [-Wformat-truncation=] 457 | snprintf(cs_s, 11, "%i ", cs); | ^ In file included from /usr/include/stdio.h:906, from src/sipsak.h:26, from src/header_f.c:18: In function 'snprintf', inlined from 'increase_cseq' at src/header_f.c:457:3: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 3 and 13 bytes into a destination of size 11 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ src/header_f.c: In function 'increase_cseq': src/header_f.c:459:17: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 459 | strncpy(cs_s, backup, strlen(backup)); | ^ src/header_f.c:459:17: note: length computed here 459 | strncpy(cs_s, backup, strlen(backup)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/header_f.c:471:25: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 471 | strncpy(backup, eol, (size_t)(strlen(eol))); | ^ src/header_f.c:471:55: note: length computed here 471 | strncpy(backup, eol, (size_t)(strlen(eol))); | ~^~~~~~~~~~~~ src/header_f.c:472:47: warning: ' ' directive output may be truncated writing 1 byte into a region of size between 0 and 10 [-Wformat-truncation=] 472 | snprintf(cs_s, 11, "%i ", cs); | ^ In function 'snprintf', inlined from 'increase_cseq' at src/header_f.c:472:4: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 3 and 13 bytes into a destination of size 11 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ src/header_f.c: In function 'increase_cseq': src/header_f.c:474:25: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 474 | strncpy(cs_s, backup, strlen(backup)); | ^ src/header_f.c:474:25: note: length computed here 474 | strncpy(cs_s, backup, strlen(backup)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/helper.c: In function 'str_alloc': src/helper.c:780:65: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Wformat=] 780 | fprintf(stderr, "error: memory allocation for %lu bytes failed\n", size); | ~~^ ~~~~ | | | | long unsigned int size_t {aka unsigned int} | %u gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/md5.o src/md5.c src/helper.c: In function 'srv_ares': src/helper.c:336:9: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 336 | strncpy(srvh, srv, strlen(srv)); | ^ src/helper.c:336:9: note: length computed here 336 | strncpy(srvh, srv, strlen(srv)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/helper.c: In function 'get_fqdn': src/helper.c:478:25: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 99 [-Wstringop-truncation] 478 | strncpy(buf, hname, FQDN_SIZE-1); | ^ src/helper.c:475:59: warning: '%s' directive output may be truncated writing up to 99 bytes into a region of size 65 [-Wformat-truncation=] 475 | snprintf(buf, FQDN_SIZE, "%s.%s", hname, dname); | ^~ ~~~~~ In file included from /usr/include/stdio.h:906, from src/sipsak.h:26, from src/helper.c:17: In function 'snprintf', inlined from 'get_fqdn' at src/helper.c:475:5: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 2 and 200 bytes into a destination of size 65 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ src/helper.c: In function 'get_fqdn': src/helper.c:495:41: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 99 [-Wstringop-truncation] 495 | strncpy(buf, hname, FQDN_SIZE-1); | ^ gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/request.o src/request.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/shoot.o src/shoot.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/sipsak.o src/sipsak.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/exit_code.o src/exit_code.c src/sipsak.c: In function 'main': src/sipsak.c:763:33: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 763 | strncpy(options.auth_username, optarg, strlen(optarg)); | ^ src/sipsak.c:763:33: note: length computed here 763 | strncpy(options.auth_username, optarg, strlen(optarg)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/sipsak.c:418:33: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 418 | strncpy(backup, optarg, strlen(optarg)); | ^ src/sipsak.c:418:33: note: length computed here 418 | strncpy(backup, optarg, strlen(optarg)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/sipsak.c:434:41: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 434 | strncpy(options.from_uri, optarg, strlen(optarg)); | ^ src/sipsak.c:434:41: note: length computed here 434 | strncpy(options.from_uri, optarg, strlen(optarg)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/sipsak.c:403:41: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 403 | strncpy(options.password, optarg, strlen(optarg)); | ^ src/sipsak.c:403:41: note: length computed here 403 | strncpy(options.password, optarg, strlen(optarg)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/sipsak.c:615:33: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 615 | strncpy(options.con_dis, optarg, strlen(optarg)); | ^ src/sipsak.c:615:33: note: length computed here 615 | strncpy(options.con_dis, optarg, strlen(optarg)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/sipsak.c:450:41: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 450 | strncpy(backup, optarg, strlen(optarg)); | ^ src/sipsak.c:450:41: note: length computed here 450 | strncpy(backup, optarg, strlen(optarg)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/sipsak.c:467:49: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 467 | strncpy(options.contact_uri, optarg, strlen(optarg)); | ^ src/sipsak.c:467:49: note: length computed here 467 | strncpy(options.contact_uri, optarg, strlen(optarg)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/sipsak.c:414:33: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 414 | strncpy(options.mes_body, optarg, strlen(optarg)); | ^ src/sipsak.c:414:33: note: length computed here 414 | strncpy(options.mes_body, optarg, strlen(optarg)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -Wl,-z,relro -Wl,-z,now -o sipsak src/transport.o src/auth.o src/header_f.o src/helper.o src/md5.o src/request.o src/shoot.o src/sipsak.o src/exit_code.o -lgnutls -lcares make[2]: Leaving directory '/build/sipsak-0.9.8.1' make[1]: Leaving directory '/build/sipsak-0.9.8.1' dh_auto_test make -j3 check "TESTSUITEFLAGS=-j3 --verbose" VERBOSE=1 make[1]: Entering directory '/build/sipsak-0.9.8.1' make tests/check_md5 tests/check_auth tests/check_helper make[2]: Entering directory '/build/sipsak-0.9.8.1' gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/tests_check_md5-md5.o `test -f 'src/md5.c' || echo './'`src/md5.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/tests_check_auth-auth.o `test -f 'src/auth.c' || echo './'`src/auth.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/tests_check_auth-md5.o `test -f 'src/md5.c' || echo './'`src/md5.c src/auth.c: In function 'insert_auth': src/auth.c:101:9: warning: '__builtin_strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] 101 | strncpy(backup, insert, strlen(insert)); | ^ src/auth.c:101:9: note: length computed here 101 | strncpy(backup, insert, strlen(insert)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/auth.c:408:17: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 408 | strncpy(insert, backup, strlen(backup)); | ^ src/auth.c:408:17: note: length computed here 408 | strncpy(insert, backup, strlen(backup)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/tests_check_auth-helper.o `test -f 'src/helper.c' || echo './'`src/helper.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o tests/check_helper-check_helper.o `test -f 'tests/check_helper.c' || echo './'`tests/check_helper.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o src/tests_check_helper-helper.o `test -f 'src/helper.c' || echo './'`src/helper.c src/helper.c: In function 'str_alloc': src/helper.c:780:65: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Wformat=] 780 | fprintf(stderr, "error: memory allocation for %lu bytes failed\n", size); | ~~^ ~~~~ | | | | long unsigned int size_t {aka unsigned int} | %u src/helper.c: In function 'str_alloc': src/helper.c:780:65: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Wformat=] 780 | fprintf(stderr, "error: memory allocation for %lu bytes failed\n", size); | ~~^ ~~~~ | | | | long unsigned int size_t {aka unsigned int} | %u src/helper.c: In function 'srv_ares': src/helper.c:336:9: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 336 | strncpy(srvh, srv, strlen(srv)); | ^ src/helper.c:336:9: note: length computed here 336 | strncpy(srvh, srv, strlen(srv)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/helper.c: In function 'srv_ares': src/helper.c:336:9: warning: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 336 | strncpy(srvh, srv, strlen(srv)); | ^ src/helper.c:336:9: note: length computed here 336 | strncpy(srvh, srv, strlen(srv)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/helper.c: In function 'get_fqdn': src/helper.c:478:25: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 99 [-Wstringop-truncation] 478 | strncpy(buf, hname, FQDN_SIZE-1); | ^ src/helper.c:475:59: warning: '%s' directive output may be truncated writing up to 99 bytes into a region of size 65 [-Wformat-truncation=] 475 | snprintf(buf, FQDN_SIZE, "%s.%s", hname, dname); | ^~ ~~~~~ In file included from /usr/include/stdio.h:906, from src/sipsak.h:26, from src/helper.c:17: In function 'snprintf', inlined from 'get_fqdn' at src/helper.c:475:5: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 2 and 200 bytes into a destination of size 65 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ src/helper.c: In function 'get_fqdn': src/helper.c:495:41: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 99 [-Wstringop-truncation] 495 | strncpy(buf, hname, FQDN_SIZE-1); | ^ src/helper.c: In function 'get_fqdn': src/helper.c:478:25: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 99 [-Wstringop-truncation] 478 | strncpy(buf, hname, FQDN_SIZE-1); | ^ src/helper.c:475:59: warning: '%s' directive output may be truncated writing up to 99 bytes into a region of size 65 [-Wformat-truncation=] 475 | snprintf(buf, FQDN_SIZE, "%s.%s", hname, dname); | ^~ ~~~~~ In file included from /usr/include/stdio.h:906, from src/sipsak.h:26, from src/helper.c:17: In function 'snprintf', inlined from 'get_fqdn' at src/helper.c:475:5: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:54:10: note: '__builtin___snprintf_chk' output between 2 and 200 bytes into a destination of size 65 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ src/helper.c: In function 'get_fqdn': src/helper.c:495:41: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 99 [-Wstringop-truncation] 495 | strncpy(buf, hname, FQDN_SIZE-1); | ^ gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o tests/check_md5-check_md5.o `test -f 'tests/check_md5.c' || echo './'`tests/check_md5.c gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -c -o tests/check_auth-check_auth.o `test -f 'tests/check_auth.c' || echo './'`tests/check_auth.c gcc -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -Wl,-z,relro -Wl,-z,now -o tests/check_md5 tests/check_md5-check_md5.o src/tests_check_md5-md5.o -lcheck_pic -lrt -lm -lsubunit -lgnutls -lcares gcc -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -Wl,-z,relro -Wl,-z,now -o tests/check_helper tests/check_helper-check_helper.o src/tests_check_helper-helper.o -lcheck_pic -lrt -lm -lsubunit -lgnutls -lcares tests/check_auth.c: In function 'set_expected_exit_code': tests/check_auth.c:23:24: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 23 | expected_exit_reason = reason; | ^ gcc -pthread -DRUNNING_CHECK -Wall -std=gnu89 -g -O2 -ffile-prefix-map=/build/sipsak-0.9.8.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -fstack-protector -I/usr/include/p11-kit-1 -Wl,-z,relro -Wl,-z,now -o tests/check_auth tests/check_auth-check_auth.o src/tests_check_auth-auth.o src/tests_check_auth-md5.o src/tests_check_auth-helper.o -lcheck_pic -lrt -lm -lsubunit -lgnutls -lcares make[2]: Leaving directory '/build/sipsak-0.9.8.1' make check-TESTS make[2]: Entering directory '/build/sipsak-0.9.8.1' make[3]: Entering directory '/build/sipsak-0.9.8.1' PASS: tests/check_md5 PASS: tests/check_auth PASS: tests/check_helper ============================================================================ Testsuite summary for sipsak 0.9.8.1 ============================================================================ # TOTAL: 3 # PASS: 3 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[3]: Leaving directory '/build/sipsak-0.9.8.1' make[2]: Leaving directory '/build/sipsak-0.9.8.1' make[1]: Leaving directory '/build/sipsak-0.9.8.1' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/sipsak/ make -j3 install DESTDIR=/build/sipsak-0.9.8.1/debian/sipsak AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/sipsak-0.9.8.1' make[2]: Entering directory '/build/sipsak-0.9.8.1' /bin/mkdir -p '/build/sipsak-0.9.8.1/debian/sipsak/usr/bin' /bin/mkdir -p '/build/sipsak-0.9.8.1/debian/sipsak/usr/share/man/man1' /usr/bin/install -c sipsak '/build/sipsak-0.9.8.1/debian/sipsak/usr/bin' /usr/bin/install -c -m 644 sipsak.1 '/build/sipsak-0.9.8.1/debian/sipsak/usr/share/man/man1' make[2]: Leaving directory '/build/sipsak-0.9.8.1' make[1]: Leaving directory '/build/sipsak-0.9.8.1' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'sipsak-dbgsym' in '../sipsak-dbgsym_0.9.8.1-1_armhf.deb'. dpkg-deb: building package 'sipsak' in '../sipsak_0.9.8.1-1_armhf.deb'. dpkg-genbuildinfo --build=binary -O../sipsak_0.9.8.1-1_armhf.buildinfo dpkg-genchanges --build=binary -O../sipsak_0.9.8.1-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/20691 and its subdirectories I: Current time: Sat Apr 29 13:03:57 -12 2023 I: pbuilder-time-stamp: 1682816637 Sun Apr 30 01:04:04 UTC 2023 I: 1st build successful. Starting 2nd build on remote node jtx1b-armhf-rb.debian.net. Sun Apr 30 01:04:04 UTC 2023 I: Preparing to do remote build '2' on jtx1b-armhf-rb.debian.net. Sun Apr 30 01:05:51 UTC 2023 I: Deleting $TMPDIR on jtx1b-armhf-rb.debian.net. Sun Apr 30 01:05:53 UTC 2023 I: sipsak_0.9.8.1-1_armhf.changes: Format: 1.8 Date: Mon, 08 Feb 2021 09:36:31 +0100 Source: sipsak Binary: sipsak sipsak-dbgsym Architecture: armhf Version: 0.9.8.1-1 Distribution: unstable Urgency: medium Maintainer: Debian VoIP Team Changed-By: Victor Seva Description: sipsak - SIP Swiss army knife Changes: sipsak (0.9.8.1-1) unstable; urgency=medium . * New upstream version 0.9.8.1 Checksums-Sha1: c90da8e905174698bcb6eecc0aec311d0fcbaa57 105204 sipsak-dbgsym_0.9.8.1-1_armhf.deb 9f97ab0e283feca77a70d42b7e3f0b526201c0db 5748 sipsak_0.9.8.1-1_armhf.buildinfo c751ebdc6f79eb8d85acb1478e120fcf9893fb9a 49376 sipsak_0.9.8.1-1_armhf.deb Checksums-Sha256: b08944cfdc81bd811be5a047d7591a86dbcb1ada665e3f2d52a204bee4c5c2b4 105204 sipsak-dbgsym_0.9.8.1-1_armhf.deb 41962cf149da2065b3bddf5e130d7261ce4234f343cb25d006b9248b75932a19 5748 sipsak_0.9.8.1-1_armhf.buildinfo 787a0076033ad0162c8a198803faa09f486404dd8785dd0fb48aa3e3fe7e4fa3 49376 sipsak_0.9.8.1-1_armhf.deb Files: d34a7f9adc23ea592a45deedd8ec67ef 105204 debug optional sipsak-dbgsym_0.9.8.1-1_armhf.deb 9f5966b5f04bbef6607d4e8bcd106ff2 5748 net optional sipsak_0.9.8.1-1_armhf.buildinfo cc4f9f9755c6032e1156dc1640729942 49376 net optional sipsak_0.9.8.1-1_armhf.deb Sun Apr 30 01:06:00 UTC 2023 I: diffoscope 241 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.dspx21bB/sipsak_0.9.8.1-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.dspx21bB/sipsak_0.9.8.1-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.dspx21bB/sipsak_0.9.8.1-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.dspx21bB/b1/sipsak_0.9.8.1-1_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.dspx21bB/b2/sipsak_0.9.8.1-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 8.241s) 8.241s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.209s) 0.209s 12 calls diffoscope.comparators.binary.FilesystemFile 0.000s 10 calls abc.DotChangesFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Sun Apr 30 01:06:13 UTC 2023 I: diffoscope 241 found no differences in the changes files, and a .buildinfo file also exists. Sun Apr 30 01:06:13 UTC 2023 I: sipsak from bookworm built successfully and reproducibly on armhf. Sun Apr 30 01:06:37 UTC 2023 I: Submitting .buildinfo files to external archives: Sun Apr 30 01:06:37 UTC 2023 I: Submitting 8.0K b1/sipsak_0.9.8.1-1_armhf.buildinfo.asc Sun Apr 30 01:06:40 UTC 2023 I: Submitting 8.0K b2/sipsak_0.9.8.1-1_armhf.buildinfo.asc Sun Apr 30 01:06:41 UTC 2023 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Apr 30 01:06:41 UTC 2023 I: Done submitting .buildinfo files. Sun Apr 30 01:06:41 UTC 2023 I: Removing signed sipsak_0.9.8.1-1_armhf.buildinfo.asc files: removed './b1/sipsak_0.9.8.1-1_armhf.buildinfo.asc' removed './b2/sipsak_0.9.8.1-1_armhf.buildinfo.asc'