Fri May 5 12:36:50 UTC 2023 I: starting to build easyh10/bookworm/armhf on jenkins on '2023-05-05 12:36' Fri May 5 12:36:50 UTC 2023 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_44/969/console.log Fri May 5 12:36:50 UTC 2023 I: Downloading source for bookworm/easyh10=1.5-5 --2023-05-05 12:36:50-- http://cdn-fastly.deb.debian.org/debian/pool/main/e/easyh10/easyh10_1.5-5.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1807 (1.8K) [text/prs.lines.tag] Saving to: ‘easyh10_1.5-5.dsc’ 0K . 100% 178M=0s 2023-05-05 12:36:50 (178 MB/s) - ‘easyh10_1.5-5.dsc’ saved [1807/1807] Fri May 5 12:36:51 UTC 2023 I: easyh10_1.5-5.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: easyh10 Binary: easyh10 Architecture: any Version: 1.5-5 Maintainer: Debian QA Group Homepage: http://easyh10.sf.net Standards-Version: 4.6.0 Vcs-Browser: https://salsa.debian.org/debian/easyh10 Vcs-Git: https://salsa.debian.org/debian/easyh10.git Build-Depends: debhelper-compat (= 13), libid3tag0-dev Package-List: easyh10 deb sound optional arch=any Checksums-Sha1: 2d6dd78f23829b6e2d21e3362a8eafd651597f19 406548 easyh10_1.5.orig.tar.gz a6ea8570608f4daae580acd05e2344ea48e3d848 6880 easyh10_1.5-5.debian.tar.xz Checksums-Sha256: 4d41ff5d85493466451464f6e0613e29a193494cc69504eefc001f367a07875d 406548 easyh10_1.5.orig.tar.gz 69eef1375c99bf478d850d09e8bfcf452a2728df248ec75a8250e4d8ad6803c7 6880 easyh10_1.5-5.debian.tar.xz Files: 167f42d1781714b0f83df4619f421a51 406548 easyh10_1.5.orig.tar.gz 602af3db2d55683438cc98a453ee0d2e 6880 easyh10_1.5-5.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEfncpR22H1vEdkazLwpPntGGCWs4FAmEdhjgACgkQwpPntGGC Ws7+JQ/+KFRadqD5KuA1NwdfhK+8sAYcJHktvzS0j1wgit/d0JQIMITRbA1uel8V M6vBtP3ysB/x89YfMcyDT7h8zie1DHuYQVzrvVyUCRyvJfVw2mhMOd8aGfDJJFcq Bo8/VP2+9AenkFaljgnnib1MGgzr5jQW81KT/0iKgeaz2EBZwv0cziFSgv97uLNj oOxNHXcbLtAAPTOmtY8m/d1oYCnqo4DDNGe+kQplTExStCdTIOzDoFK5CaQ8LWBf W20EwYy/FepM7xKdi1aXhcWZwWD5xyhsd0SzjsvewRPclTQy3BE3y9e0mavXL/zt xSDehYwBhL47c4u6kLXTamRIN0a6Fs+ikdDCZ9gSU7E5BUnEAgi3hMD7zK9y9fiO nJiMIyBPidYKQTCpqFBj9ljf4QL+280YQAipU7VTOCmabk8b1jFx0/fLHbD0z8A4 nJ/MocCAOz6BKs9+wvwX+H+v7GuCfNnTFMjt88XynCSiFPJadCuglSfpByOQEQsC O2TkK/M1n8oRNrzS7KaXYklv/h78dAPLRnY1KjfxLFOIfGpnhNnMzkTx7cvgaR90 GYIUgaWJYAGo3TNggpD0PUqBEpKg2PEYF0bim52+N/Et4FwCRoR+L5huaXR3X502 HUDwsO8HkGRmae//YVvE3Duw4Oz30+8Bsxr5cH4/eU81DrkmfOI= =oeVQ -----END PGP SIGNATURE----- Fri May 5 12:36:51 UTC 2023 I: Checking whether the package is not for us Fri May 5 12:36:51 UTC 2023 I: Starting 1st build on remote node cbxi4pro0-armhf-rb.debian.net. Fri May 5 12:36:51 UTC 2023 I: Preparing to do remote build '1' on cbxi4pro0-armhf-rb.debian.net. Fri May 5 12:45:10 UTC 2023 I: Deleting $TMPDIR on cbxi4pro0-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri May 5 00:37:02 -12 2023 I: pbuilder-time-stamp: 1683290222 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [easyh10_1.5-5.dsc] I: copying [./easyh10_1.5.orig.tar.gz] I: copying [./easyh10_1.5-5.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Aug 18 10:14:16 2021 -12 gpgv: using RSA key 7E7729476D87D6F11D91ACCBC293E7B461825ACE gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./easyh10_1.5-5.dsc: no acceptable signature found dpkg-source: info: extracting easyh10 in easyh10-1.5 dpkg-source: info: unpacking easyh10_1.5.orig.tar.gz dpkg-source: info: unpacking easyh10_1.5-5.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 10-fix-autoconf.in.patch dpkg-source: info: applying 20-dont-install-docs.patch dpkg-source: info: applying 30-fix-spelling.patch dpkg-source: info: applying 40-fix-FTBFS-Hurd.patch dpkg-source: info: applying 50-no-am-langinfo-codeset.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/28082/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3' DISTRIBUTION='bookworm' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='6cb496be4b474153893c93393aa179b9' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='28082' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/pbuilderrc_Ce6V --distribution bookworm --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/b1 --logfile b1/build.log easyh10_1.5-5.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux cbxi4pro0 5.10.0-22-armmp #1 SMP Debian 5.10.178-3 (2023-04-22) armv7l GNU/Linux I: ls -l /bin total 5072 -rwxr-xr-x 1 root root 838488 Apr 23 09:24 bash -rwxr-xr-x 3 root root 67144 Sep 18 2022 bunzip2 -rwxr-xr-x 3 root root 67144 Sep 18 2022 bzcat lrwxrwxrwx 1 root root 6 Sep 18 2022 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Sep 18 2022 bzdiff lrwxrwxrwx 1 root root 6 Sep 18 2022 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4893 Nov 27 2021 bzexe lrwxrwxrwx 1 root root 6 Sep 18 2022 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Sep 18 2022 bzgrep -rwxr-xr-x 3 root root 67144 Sep 18 2022 bzip2 -rwxr-xr-x 1 root root 67112 Sep 18 2022 bzip2recover lrwxrwxrwx 1 root root 6 Sep 18 2022 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Sep 18 2022 bzmore -rwxr-xr-x 1 root root 67632 Sep 20 2022 cat -rwxr-xr-x 1 root root 67676 Sep 20 2022 chgrp -rwxr-xr-x 1 root root 67644 Sep 20 2022 chmod -rwxr-xr-x 1 root root 67684 Sep 20 2022 chown -rwxr-xr-x 1 root root 133532 Sep 20 2022 cp -rwxr-xr-x 1 root root 132868 Jan 5 01:20 dash -rwxr-xr-x 1 root root 133220 Sep 20 2022 date -rwxr-xr-x 1 root root 67732 Sep 20 2022 dd -rwxr-xr-x 1 root root 68104 Sep 20 2022 df -rwxr-xr-x 1 root root 133632 Sep 20 2022 dir -rwxr-xr-x 1 root root 59128 Mar 22 21:02 dmesg lrwxrwxrwx 1 root root 8 Dec 19 01:33 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Dec 19 01:33 domainname -> hostname -rwxr-xr-x 1 root root 67560 Sep 20 2022 echo -rwxr-xr-x 1 root root 41 Jan 24 02:43 egrep -rwxr-xr-x 1 root root 67548 Sep 20 2022 false -rwxr-xr-x 1 root root 41 Jan 24 02:43 fgrep -rwxr-xr-x 1 root root 55748 Mar 22 21:02 findmnt -rwsr-xr-x 1 root root 26208 Mar 22 20:15 fusermount -rwxr-xr-x 1 root root 128608 Jan 24 02:43 grep -rwxr-xr-x 2 root root 2346 Apr 9 2022 gunzip -rwxr-xr-x 1 root root 6447 Apr 9 2022 gzexe -rwxr-xr-x 1 root root 64220 Apr 9 2022 gzip -rwxr-xr-x 1 root root 67032 Dec 19 01:33 hostname -rwxr-xr-x 1 root root 67720 Sep 20 2022 ln -rwxr-xr-x 1 root root 35132 Mar 22 21:51 login -rwxr-xr-x 1 root root 133632 Sep 20 2022 ls -rwxr-xr-x 1 root root 136808 Mar 22 21:02 lsblk -rwxr-xr-x 1 root root 67800 Sep 20 2022 mkdir -rwxr-xr-x 1 root root 67764 Sep 20 2022 mknod -rwxr-xr-x 1 root root 67596 Sep 20 2022 mktemp -rwxr-xr-x 1 root root 38504 Mar 22 21:02 more -rwsr-xr-x 1 root root 38496 Mar 22 21:02 mount -rwxr-xr-x 1 root root 9824 Mar 22 21:02 mountpoint -rwxr-xr-x 1 root root 133532 Sep 20 2022 mv lrwxrwxrwx 1 root root 8 Dec 19 01:33 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 2 18:25 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 67608 Sep 20 2022 pwd lrwxrwxrwx 1 root root 4 Apr 23 09:24 rbash -> bash -rwxr-xr-x 1 root root 67600 Sep 20 2022 readlink -rwxr-xr-x 1 root root 67672 Sep 20 2022 rm -rwxr-xr-x 1 root root 67600 Sep 20 2022 rmdir -rwxr-xr-x 1 root root 67400 Nov 2 2022 run-parts -rwxr-xr-x 1 root root 133372 Jan 5 07:55 sed lrwxrwxrwx 1 root root 4 Jan 5 01:20 sh -> dash -rwxr-xr-x 1 root root 67584 Sep 20 2022 sleep -rwxr-xr-x 1 root root 67644 Sep 20 2022 stty -rwsr-xr-x 1 root root 50800 Mar 22 21:02 su -rwxr-xr-x 1 root root 67584 Sep 20 2022 sync -rwxr-xr-x 1 root root 336764 Apr 6 02:25 tar -rwxr-xr-x 1 root root 67144 Nov 2 2022 tempfile -rwxr-xr-x 1 root root 133224 Sep 20 2022 touch -rwxr-xr-x 1 root root 67548 Sep 20 2022 true -rwxr-xr-x 1 root root 9768 Mar 22 20:15 ulockmgr_server -rwsr-xr-x 1 root root 22108 Mar 22 21:02 umount -rwxr-xr-x 1 root root 67572 Sep 20 2022 uname -rwxr-xr-x 2 root root 2346 Apr 9 2022 uncompress -rwxr-xr-x 1 root root 133632 Sep 20 2022 vdir -rwxr-xr-x 1 root root 42608 Mar 22 21:02 wdctl lrwxrwxrwx 1 root root 8 Dec 19 01:33 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Apr 9 2022 zcat -rwxr-xr-x 1 root root 1678 Apr 9 2022 zcmp -rwxr-xr-x 1 root root 6460 Apr 9 2022 zdiff -rwxr-xr-x 1 root root 29 Apr 9 2022 zegrep -rwxr-xr-x 1 root root 29 Apr 9 2022 zfgrep -rwxr-xr-x 1 root root 2081 Apr 9 2022 zforce -rwxr-xr-x 1 root root 8103 Apr 9 2022 zgrep -rwxr-xr-x 1 root root 2206 Apr 9 2022 zless -rwxr-xr-x 1 root root 1842 Apr 9 2022 zmore -rwxr-xr-x 1 root root 4577 Apr 9 2022 znew I: user script /srv/workspace/pbuilder/28082/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libid3tag0-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19329 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libid3tag0-dev; however: Package libid3tag0-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libid3tag0{a} libid3tag0-dev{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libpkgconf3{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 37 newly installed, 0 to remove and 0 not upgraded. Need to get 19.1 MB of archives. After unpacking 69.4 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bookworm/main armhf sensible-utils all 0.0.17+nmu1 [19.0 kB] Get: 2 http://deb.debian.org/debian bookworm/main armhf libmagic-mgc armhf 1:5.44-3 [305 kB] Get: 3 http://deb.debian.org/debian bookworm/main armhf libmagic1 armhf 1:5.44-3 [96.5 kB] Get: 4 http://deb.debian.org/debian bookworm/main armhf file armhf 1:5.44-3 [41.6 kB] Get: 5 http://deb.debian.org/debian bookworm/main armhf gettext-base armhf 0.21-12 [157 kB] Get: 6 http://deb.debian.org/debian bookworm/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 7 http://deb.debian.org/debian bookworm/main armhf groff-base armhf 1.22.4-10 [825 kB] Get: 8 http://deb.debian.org/debian bookworm/main armhf bsdextrautils armhf 2.38.1-5+b1 [78.6 kB] Get: 9 http://deb.debian.org/debian bookworm/main armhf libpipeline1 armhf 1.5.7-1 [33.6 kB] Get: 10 http://deb.debian.org/debian bookworm/main armhf man-db armhf 2.11.2-2 [1351 kB] Get: 11 http://deb.debian.org/debian bookworm/main armhf m4 armhf 1.4.19-3 [265 kB] Get: 12 http://deb.debian.org/debian bookworm/main armhf autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian bookworm/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian bookworm/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian bookworm/main armhf autopoint all 0.21-12 [495 kB] Get: 16 http://deb.debian.org/debian bookworm/main armhf libdebhelper-perl all 13.11.4 [81.2 kB] Get: 17 http://deb.debian.org/debian bookworm/main armhf libtool all 2.4.7-5 [517 kB] Get: 18 http://deb.debian.org/debian bookworm/main armhf dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian bookworm/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian bookworm/main armhf libsub-override-perl all 0.09-4 [9304 B] Get: 21 http://deb.debian.org/debian bookworm/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian bookworm/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian bookworm/main armhf libelf1 armhf 0.188-2.1 [170 kB] Get: 24 http://deb.debian.org/debian bookworm/main armhf dwz armhf 0.15-1 [101 kB] Get: 25 http://deb.debian.org/debian bookworm/main armhf libicu72 armhf 72.1-3 [9048 kB] Get: 26 http://deb.debian.org/debian bookworm/main armhf libxml2 armhf 2.9.14+dfsg-1.2 [591 kB] Get: 27 http://deb.debian.org/debian bookworm/main armhf gettext armhf 0.21-12 [1229 kB] Get: 28 http://deb.debian.org/debian bookworm/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian bookworm/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian bookworm/main armhf debhelper all 13.11.4 [942 kB] Get: 31 http://deb.debian.org/debian bookworm/main armhf libid3tag0 armhf 0.15.1b-14 [30.2 kB] Get: 32 http://deb.debian.org/debian bookworm/main armhf libpkgconf3 armhf 1.8.1-1 [31.3 kB] Get: 33 http://deb.debian.org/debian bookworm/main armhf pkgconf-bin armhf 1.8.1-1 [28.5 kB] Get: 34 http://deb.debian.org/debian bookworm/main armhf pkgconf armhf 1.8.1-1 [25.9 kB] Get: 35 http://deb.debian.org/debian bookworm/main armhf pkg-config armhf 1.8.1-1 [13.7 kB] Get: 36 http://deb.debian.org/debian bookworm/main armhf zlib1g-dev armhf 1:1.2.13.dfsg-1 [902 kB] Get: 37 http://deb.debian.org/debian bookworm/main armhf libid3tag0-dev armhf 0.15.1b-14 [35.7 kB] Fetched 19.1 MB in 2s (7853 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19329 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_armhf.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../02-libmagic1_1%3a5.44-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.44-3_armhf.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-12_armhf.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../05-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.22.4-10_armhf.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.38.1-5+b1_armhf.deb ... Unpacking bsdextrautils (2.38.1-5+b1) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../08-libpipeline1_1.5.7-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.11.2-2_armhf.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-3_armhf.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.188-2.1_armhf.deb ... Unpacking libelf1:armhf (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_armhf.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../24-libicu72_72.1-3_armhf.deb ... Unpacking libicu72:armhf (72.1-3) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.2_armhf.deb ... Unpacking libxml2:armhf (2.9.14+dfsg-1.2) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-12_armhf.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package libid3tag0:armhf. Preparing to unpack .../30-libid3tag0_0.15.1b-14_armhf.deb ... Unpacking libid3tag0:armhf (0.15.1b-14) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../31-libpkgconf3_1.8.1-1_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-1) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../32-pkgconf-bin_1.8.1-1_armhf.deb ... Unpacking pkgconf-bin (1.8.1-1) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../33-pkgconf_1.8.1-1_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-1) ... Selecting previously unselected package pkg-config:armhf. Preparing to unpack .../34-pkg-config_1.8.1-1_armhf.deb ... Unpacking pkg-config:armhf (1.8.1-1) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../35-zlib1g-dev_1%3a1.2.13.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.13.dfsg-1) ... Selecting previously unselected package libid3tag0-dev. Preparing to unpack .../36-libid3tag0-dev_0.15.1b-14_armhf.deb ... Unpacking libid3tag0-dev (0.15.1b-14) ... Setting up libpipeline1:armhf (1.5.7-1) ... Setting up libicu72:armhf (72.1-3) ... Setting up bsdextrautils (2.38.1-5+b1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libmagic1:armhf (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up libid3tag0:armhf (0.15.1b-14) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:armhf (1.8.1-1) ... Setting up autopoint (0.21-12) ... Setting up pkgconf-bin (1.8.1-1) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:armhf (1:1.2.13.dfsg-1) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libsub-override-perl (0.09-4) ... Setting up libelf1:armhf (0.188-2.1) ... Setting up libxml2:armhf (2.9.14+dfsg-1.2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up pkgconf:armhf (1.8.1-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up pkg-config:armhf (1.8.1-1) ... Setting up libid3tag0-dev (0.15.1b-14) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.11.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.11.4) ... Processing triggers for libc-bin (2.36-9) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/easyh10-1.5/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../easyh10_1.5-5_source.changes dpkg-buildpackage: info: source package easyh10 dpkg-buildpackage: info: source version 1.5-5 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Boyuan Yang dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.in, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:18: warning: The macro `AC_AIX' is obsolete. configure.in:18: You should run autoupdate. ./lib/autoconf/specific.m4:540: AC_AIX is expanded from... configure.in:18: the top level configure.in:19: warning: The macro `AC_MINIX' is obsolete. configure.in:19: You should run autoupdate. ./lib/autoconf/specific.m4:545: AC_MINIX is expanded from... configure.in:19: the top level configure.in:20: warning: The macro `AC_ISC_POSIX' is obsolete. configure.in:20: You should run autoupdate. ./lib/autoconf/specific.m4:550: AC_ISC_POSIX is expanded from... configure.in:20: the top level configure.in:23: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:9517: AM_INIT_AUTOMAKE is expanded from... configure.in:23: the top level configure.in:24: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.in:24: You should use the 'AC_CONFIG_HEADERS' macro instead. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:9869: AM_CONFIG_HEADER is expanded from... configure.in:24: the top level configure.in:27: warning: The macro `AC_HEADER_STDC' is obsolete. configure.in:27: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.in:27: the top level configure.in:28: warning: AC_CHECK_HEADERS("string.h"): you should use literals ./lib/autoconf/headers.m4:217: AC_CHECK_HEADERS is expanded from... configure.in:28: the top level configure.in:31: warning: 'AM_PROG_CC_STDC': this macro is obsolete. configure.in:31: You should simply use the 'AC_PROG_CC' macro instead. configure.in:31: Also, your code should no longer depend upon 'am_cv_prog_cc_stdc', configure.in:31: but upon 'ac_cv_prog_cc_stdc'. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:9875: AM_PROG_CC_STDC is expanded from... configure.in:31: the top level configure.in:37: warning: The macro `AC_PROG_LIBTOOL' is obsolete. configure.in:37: You should run autoupdate. aclocal.m4:122: AC_PROG_LIBTOOL is expanded from... configure.in:37: the top level configure.in:48: warning: The macro `AC_HEADER_STDC' is obsolete. configure.in:48: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.in:48: the top level configure.in:116: warning: The macro `AC_HELP_STRING' is obsolete. configure.in:116: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.in:116: the top level configure.in:122: warning: The macro `AC_HELP_STRING' is obsolete. configure.in:122: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.in:122: the top level configure.in:187: warning: The macro `AC_HELP_STRING' is obsolete. configure.in:187: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.in:187: the top level configure.in:193: warning: The macro `AC_HELP_STRING' is obsolete. configure.in:193: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... configure.in:193: the top level configure.in:241: warning: The macro `AC_HELP_STRING' is obsolete. configure.in:241: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... configure.in:241: the top level autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:23: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.in:23: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.in:18: installing './compile' configure.in:23: installing './missing' configure.in:253: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' cui/Makefile.am:24: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') cui/Makefile.am:7: warning: source file '../common/playlist.c' is in a subdirectory, cui/Makefile.am:7: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least one source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, this automake: behavior may change in a future Automake major version, with object automake: files being placed in the same subdirectory as the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. cui/Makefile.am:7: warning: source file '../common/regex_playlist_posix.c' is in a subdirectory, cui/Makefile.am:7: but option 'subdir-objects' is disabled cui/Makefile.am:7: warning: source file '../common/easyh10_database.c' is in a subdirectory, cui/Makefile.am:7: but option 'subdir-objects' is disabled cui/Makefile.am:7: warning: source file '../common/easyh10_template.c' is in a subdirectory, cui/Makefile.am:7: but option 'subdir-objects' is disabled cui/Makefile.am:7: warning: source file '../common/easyh10_dump.c' is in a subdirectory, cui/Makefile.am:7: but option 'subdir-objects' is disabled cui/Makefile.am:7: warning: source file '../common/easyh10_playlist.c' is in a subdirectory, cui/Makefile.am:7: but option 'subdir-objects' is disabled cui/Makefile.am:7: warning: source file '../common/easyh10_tuner.c' is in a subdirectory, cui/Makefile.am:7: but option 'subdir-objects' is disabled cui/Makefile.am:7: warning: source file '../common/filepathutil_posix.c' is in a subdirectory, cui/Makefile.am:7: but option 'subdir-objects' is disabled cui/Makefile.am:7: warning: source file '../common/rel2abs.c' is in a subdirectory, cui/Makefile.am:7: but option 'subdir-objects' is disabled cui/Makefile.am: installing './depcomp' libgetmediainfo/Makefile.am:13: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') libh10db/Makefile.am:22: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') libucs2/Makefile.am:11: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') dh_auto_configure ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for library containing strerror... none required checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking dependency style of gcc... none checking whether to enable maintainer-specific portions of Makefiles... no checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for string.h... (cached) yes checking for gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking for gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking whether ln -s works... yes checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for egrep... (cached) /bin/grep -E checking for fcntl.h... yes checking for limits.h... yes checking for malloc.h... yes checking for strings.h... (cached) yes checking for unistd.h... (cached) yes checking for stdint.h... (cached) yes checking for getopt.h... yes checking for an ANSI C-conforming const... yes checking size of ... 0 checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking size of short... 2 checking size of unsigned short... 2 checking size of int... 4 checking size of unsigned int... 4 checking size of long... 4 checking size of unsigned long... 4 checking for uint8_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for working alloca.h... yes checking for alloca... yes checking for working memcmp... yes checking for vprintf... yes checking for getcwd... yes checking for mktime... yes checking for strdup... yes checking for strerror... yes checking for strtol... yes checking for strtoul... yes checking for rand in -lm... yes checking for uncompress in -lz... yes checking for iconv.h... yes checking for iconv_open... yes checking for id3tag.h... yes checking for id3_file_fdopen in -lid3tag... yes checking for id3_file_gettag in -lid3tag... no checking for regcomp... yes checking for regexec... yes checking for regfree... yes checking for rxposix.h... no checking for regexec in -lrx... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating cui/Makefile config.status: creating libh10db/Makefile config.status: creating libucs2/Makefile config.status: creating libgetmediainfo/Makefile config.status: creating easyh10.spec config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands dh_auto_build make -j3 make[1]: Entering directory '/build/easyh10-1.5' make all-recursive make[2]: Entering directory '/build/easyh10-1.5' Making all in libh10db make[3]: Entering directory '/build/easyh10-1.5/libh10db' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bufferedfile.lo bufferedfile.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o crc.lo crc.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db.lo h10db.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c crc.c -fPIC -DPIC -o .libs/crc.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db.c -fPIC -DPIC -o .libs/h10db.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c bufferedfile.c -fPIC -DPIC -o .libs/bufferedfile.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c crc.c -o crc.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c bufferedfile.c -o bufferedfile.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_dat.lo h10db_dat.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_dat.c -fPIC -DPIC -o .libs/h10db_dat.o /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_hdr.lo h10db_hdr.c h10db_dat.c: In function 'h10db_dat_repr': h10db_dat.c:262:33: warning: format '%s' expects argument of type 'char *', but argument 3 has type 'ucs2_char_t *' {aka 'short unsigned int *'} [-Wformat=] 262 | fprintf(fp, "unknown6: %s\n", item->unknown6); | ~^ ~~~~~~~~~~~~~~ | | | | char * ucs2_char_t * {aka short unsigned int *} | %hn h10db_dat.c:264:33: warning: format '%s' expects argument of type 'char *', but argument 3 has type 'ucs2_char_t *' {aka 'short unsigned int *'} [-Wformat=] 264 | fprintf(fp, "unknown8: %s\n", item->unknown8); | ~^ ~~~~~~~~~~~~~~ | | | | char * ucs2_char_t * {aka short unsigned int *} | %hn libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_hdr.c -fPIC -DPIC -o .libs/h10db_hdr.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_hdr.c -o h10db_hdr.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_idx.lo h10db_idx.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_dat.c -o h10db_dat.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db.c -o h10db.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_idx.c -fPIC -DPIC -o .libs/h10db_idx.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_idx.c -o h10db_idx.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_upd.lo h10db_upd.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_upd.c -fPIC -DPIC -o .libs/h10db_upd.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_upd.c -o h10db_upd.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_model.lo h10db_model.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o serialize.lo serialize.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_model.c -fPIC -DPIC -o .libs/h10db_model.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c serialize.c -fPIC -DPIC -o .libs/serialize.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_model.c -o h10db_model.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c serialize.c -o serialize.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o libh10db.la bufferedfile.lo crc.lo h10db.lo h10db_dat.lo h10db_hdr.lo h10db_idx.lo h10db_upd.lo h10db_model.lo serialize.lo -lz -lm libtool: link: ar cr .libs/libh10db.a .libs/bufferedfile.o .libs/crc.o .libs/h10db.o .libs/h10db_dat.o .libs/h10db_hdr.o .libs/h10db_idx.o .libs/h10db_upd.o .libs/h10db_model.o .libs/serialize.o libtool: link: ranlib .libs/libh10db.a libtool: link: ( cd ".libs" && rm -f "libh10db.la" && ln -s "../libh10db.la" "libh10db.la" ) make[3]: Leaving directory '/build/easyh10-1.5/libh10db' Making all in libucs2 make[3]: Entering directory '/build/easyh10-1.5/libucs2' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o ucs2char.lo ucs2char.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o ucs2char_iconv.lo ucs2char_iconv.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c ucs2char.c -fPIC -DPIC -o .libs/ucs2char.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c ucs2char_iconv.c -fPIC -DPIC -o .libs/ucs2char_iconv.o ucs2char.c: In function 'print_ucs2': ucs2char.c:284:28: warning: format '%c' expects a matching 'int' argument [-Wformat=] 284 | fprintf(stderr, "0x%X %c ", *str); | ~^ | | | int ucs2char_iconv.c: In function 'print_ucs2': ucs2char_iconv.c:57:28: warning: format '%c' expects a matching 'int' argument [-Wformat=] 57 | fprintf(stderr, "0x%X %c ", *str); | ~^ | | | int ucs2char_iconv.c: In function 'iconv_convert': ucs2char_iconv.c:169:27: warning: passing argument 2 of 'iconv' from incompatible pointer type [-Wincompatible-pointer-types] 169 | iconv(cd, (const char **)inbuf, &inbytesleft, (char **)outbuf, &outbytesleft); | ^~~~~~~~~~~~~~~~~~~~ | | | const char ** In file included from ucs2char_iconv.c:40: /usr/include/iconv.h:49:54: note: expected 'char ** restrict' but argument is of type 'const char **' 49 | extern size_t iconv (iconv_t __cd, char **__restrict __inbuf, | ~~~~~~~~~~~~~~~~~~^~~~~~~ ucs2char_iconv.c:177:50: warning: passing argument 2 of 'iconv' from incompatible pointer type [-Wincompatible-pointer-types] 177 | int iconvret = iconv(cd, (const char **)inbuf, &inbytesleft, &p, &outbytesleft); | ^~~~~~~~~~~~~~~~~~~~ | | | const char ** /usr/include/iconv.h:49:54: note: expected 'char ** restrict' but argument is of type 'const char **' 49 | extern size_t iconv (iconv_t __cd, char **__restrict __inbuf, | ~~~~~~~~~~~~~~~~~~^~~~~~~ ucs2char_iconv.c: In function 'ucs2stat_is_exist': ucs2char_iconv.c:319:25: warning: implicit declaration of function 'close'; did you mean 'pclose'? [-Wimplicit-function-declaration] 319 | close(ret); | ^~~~~ | pclose libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c ucs2char_iconv.c -o ucs2char_iconv.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c ucs2char.c -o ucs2char.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o libucs2.la ucs2char.lo ucs2char_iconv.lo -lz -lm libtool: link: ar cr .libs/libucs2.a .libs/ucs2char.o .libs/ucs2char_iconv.o libtool: link: ranlib .libs/libucs2.a libtool: link: ( cd ".libs" && rm -f "libucs2.la" && ln -s "../libucs2.la" "libucs2.la" ) make[3]: Leaving directory '/build/easyh10-1.5/libucs2' Making all in libgetmediainfo make[3]: Entering directory '/build/easyh10-1.5/libgetmediainfo' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o getmediainfo.lo getmediainfo.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o gmi_mp3_id3tag.lo gmi_mp3_id3tag.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o gmi_wma.lo gmi_wma.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c getmediainfo.c -fPIC -DPIC -o .libs/getmediainfo.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_mp3_id3tag.c -fPIC -DPIC -o .libs/gmi_mp3_id3tag.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_wma.c -fPIC -DPIC -o .libs/gmi_wma.o gmi_mp3_id3tag.c:61:14: warning: type defaults to 'int' in declaration of 'bitrate_table' [-Wimplicit-int] 61 | static const bitrate_table[3][16] = { | ^~~~~~~~~~~~~ gmi_mp3_id3tag.c:67:14: warning: type defaults to 'int' in declaration of 'samplerate_table' [-Wimplicit-int] 67 | static const samplerate_table[3][4] = { | ^~~~~~~~~~~~~~~~ libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_mp3_id3tag.c -o gmi_mp3_id3tag.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c getmediainfo.c -o getmediainfo.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_wma.c -o gmi_wma.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o gmi_wav.lo gmi_wav.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_wav.c -fPIC -DPIC -o .libs/gmi_wav.o gmi_wav.c: In function 'parse_listinfo': gmi_wav.c:102:17: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 102 | fread(buffer, sizeof(char), size, fp); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_wav.c -o gmi_wav.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o libgetmediainfo.la getmediainfo.lo gmi_mp3_id3tag.lo gmi_wma.lo gmi_wav.lo -lz -lm libtool: link: ar cr .libs/libgetmediainfo.a .libs/getmediainfo.o .libs/gmi_mp3_id3tag.o .libs/gmi_wma.o .libs/gmi_wav.o libtool: link: ranlib .libs/libgetmediainfo.a libtool: link: ( cd ".libs" && rm -f "libgetmediainfo.la" && ln -s "../libgetmediainfo.la" "libgetmediainfo.la" ) make[3]: Leaving directory '/build/easyh10-1.5/libgetmediainfo' Making all in cui make[3]: Entering directory '/build/easyh10-1.5/cui' gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o main.o main.c gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o playlist.o `test -f '../common/playlist.c' || echo './'`../common/playlist.c gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o regex_playlist_posix.o `test -f '../common/regex_playlist_posix.c' || echo './'`../common/regex_playlist_posix.c main.c: In function 'main': main.c:938:25: warning: implicit declaration of function 'getcwd'; did you mean 'getw'? [-Wimplicit-function-declaration] 938 | getcwd(pwd, MAX_PATH); | ^~~~~~ | getw main.c:1107:30: warning: too many arguments for format [-Wformat-extra-args] 1107 | fprintf(fpe, "Installing: %seasyh10.model\n", tmp, PATHCHAR); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_database.o `test -f '../common/easyh10_database.c' || echo './'`../common/easyh10_database.c gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_template.o `test -f '../common/easyh10_template.c' || echo './'`../common/easyh10_template.c gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_dump.o `test -f '../common/easyh10_dump.c' || echo './'`../common/easyh10_dump.c gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_playlist.o `test -f '../common/easyh10_playlist.c' || echo './'`../common/easyh10_playlist.c gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_tuner.o `test -f '../common/easyh10_tuner.c' || echo './'`../common/easyh10_tuner.c ../common/easyh10_tuner.c: In function 'import_tuner': ../common/easyh10_tuner.c:156:24: warning: implicit declaration of function 'isspace' [-Wimplicit-function-declaration] 156 | while (isspace(*begin)) { | ^~~~~~~ ../common/easyh10_tuner.c:37:1: note: include '' or provide a declaration of 'isspace' 36 | #include +++ |+#include 37 | gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o filepathutil_posix.o `test -f '../common/filepathutil_posix.c' || echo './'`../common/filepathutil_posix.c gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o rel2abs.o `test -f '../common/rel2abs.c' || echo './'`../common/rel2abs.c /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -Wl,-z,relro -Wl,-z,now -o easyh10 main.o playlist.o regex_playlist_posix.o easyh10_database.o easyh10_template.o easyh10_dump.o easyh10_playlist.o easyh10_tuner.o filepathutil_posix.o rel2abs.o ../libh10db/libh10db.la ../libucs2/libucs2.la ../libgetmediainfo/libgetmediainfo.la -lid3tag -lz -lm libtool: link: gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,relro -Wl,-z -Wl,now -o easyh10 main.o playlist.o regex_playlist_posix.o easyh10_database.o easyh10_template.o easyh10_dump.o easyh10_playlist.o easyh10_tuner.o filepathutil_posix.o rel2abs.o ../libh10db/.libs/libh10db.a ../libucs2/.libs/libucs2.a ../libgetmediainfo/.libs/libgetmediainfo.a -lid3tag -lz -lm make[3]: Leaving directory '/build/easyh10-1.5/cui' make[3]: Entering directory '/build/easyh10-1.5' make[3]: Leaving directory '/build/easyh10-1.5' make[2]: Leaving directory '/build/easyh10-1.5' make[1]: Leaving directory '/build/easyh10-1.5' dh_auto_test make -j3 check "TESTSUITEFLAGS=-j3 --verbose" VERBOSE=1 make[1]: Entering directory '/build/easyh10-1.5' Making check in libh10db make[2]: Entering directory '/build/easyh10-1.5/libh10db' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/easyh10-1.5/libh10db' Making check in libucs2 make[2]: Entering directory '/build/easyh10-1.5/libucs2' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/easyh10-1.5/libucs2' Making check in libgetmediainfo make[2]: Entering directory '/build/easyh10-1.5/libgetmediainfo' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/easyh10-1.5/libgetmediainfo' Making check in cui make[2]: Entering directory '/build/easyh10-1.5/cui' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/easyh10-1.5/cui' make[2]: Entering directory '/build/easyh10-1.5' make[2]: Leaving directory '/build/easyh10-1.5' make[1]: Leaving directory '/build/easyh10-1.5' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/easyh10/ make -j1 install DESTDIR=/build/easyh10-1.5/debian/easyh10 AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/easyh10-1.5' Making install in libh10db make[2]: Entering directory '/build/easyh10-1.5/libh10db' make[3]: Entering directory '/build/easyh10-1.5/libh10db' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/easyh10-1.5/libh10db' make[2]: Leaving directory '/build/easyh10-1.5/libh10db' Making install in libucs2 make[2]: Entering directory '/build/easyh10-1.5/libucs2' make[3]: Entering directory '/build/easyh10-1.5/libucs2' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/easyh10-1.5/libucs2' make[2]: Leaving directory '/build/easyh10-1.5/libucs2' Making install in libgetmediainfo make[2]: Entering directory '/build/easyh10-1.5/libgetmediainfo' make[3]: Entering directory '/build/easyh10-1.5/libgetmediainfo' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/easyh10-1.5/libgetmediainfo' make[2]: Leaving directory '/build/easyh10-1.5/libgetmediainfo' Making install in cui make[2]: Entering directory '/build/easyh10-1.5/cui' make[3]: Entering directory '/build/easyh10-1.5/cui' /bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c easyh10 '/build/easyh10-1.5/debian/easyh10/usr/bin' libtool: install: /usr/bin/install -c easyh10 /build/easyh10-1.5/debian/easyh10/usr/bin/easyh10 /bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/share/man/man1' /usr/bin/install -c -m 644 easyh10.1 '/build/easyh10-1.5/debian/easyh10/usr/share/man/man1' make[3]: Leaving directory '/build/easyh10-1.5/cui' make[2]: Leaving directory '/build/easyh10-1.5/cui' make[2]: Entering directory '/build/easyh10-1.5' make[3]: Entering directory '/build/easyh10-1.5' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/share/doc/easyh10' /usr/bin/install -c -m 644 README '/build/easyh10-1.5/debian/easyh10/usr/share/doc/easyh10' /bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/share/easyh10/model' /usr/bin/install -c -m 644 model/H10MTP_20GB_FW1.00-1.02.model model/H10MTP_20GB_FW2.51.model model/H10MTP_5GB_FW2.03-2.10.model model/H10MTP_5GB_FW2.51.model model/H10MTP_6GB_FW2.03-2.10.model model/H10MTP_6GB_FW2.51.model model/H10UMS_5GB_FW2.03.model model/H10UMS_5GB_FW2.04-2.51.model model/H10UMS_5GB_FW2.04-2.52.model model/H10UMS_6GB_FW2.03.model model/H10UMS_6GB_FW2.04-2.51.model model/H10UMS_6GB_FW2.04-2.52.model '/build/easyh10-1.5/debian/easyh10/usr/share/easyh10/model' /bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/share/easyh10/model' /usr/bin/install -c -m 644 tuner/berlin.de.fmr tuner/default.fmr tuner/dublin.ie.fmr tuner/tokyo.jp.fmr '/build/easyh10-1.5/debian/easyh10/usr/share/easyh10/model' make[3]: Leaving directory '/build/easyh10-1.5' make[2]: Leaving directory '/build/easyh10-1.5' make[1]: Leaving directory '/build/easyh10-1.5' dh_installdocs dh_installchangelogs dh_installman dh_installmenu dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'easyh10' in '../easyh10_1.5-5_armhf.deb'. dpkg-deb: building package 'easyh10-dbgsym' in '../easyh10-dbgsym_1.5-5_armhf.deb'. dpkg-genbuildinfo --build=binary -O../easyh10_1.5-5_armhf.buildinfo dpkg-genchanges --build=binary -O../easyh10_1.5-5_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/28082 and its subdirectories I: Current time: Fri May 5 00:45:03 -12 2023 I: pbuilder-time-stamp: 1683290703 Fri May 5 12:45:12 UTC 2023 I: 1st build successful. Starting 2nd build on remote node jtx1c-armhf-rb.debian.net. Fri May 5 12:45:12 UTC 2023 I: Preparing to do remote build '2' on jtx1c-armhf-rb.debian.net. Fri May 5 12:49:16 UTC 2023 I: Deleting $TMPDIR on jtx1c-armhf-rb.debian.net. Fri May 5 12:49:19 UTC 2023 I: easyh10_1.5-5_armhf.changes: Format: 1.8 Date: Wed, 18 Aug 2021 18:02:33 -0400 Source: easyh10 Binary: easyh10 easyh10-dbgsym Architecture: armhf Version: 1.5-5 Distribution: unstable Urgency: medium Maintainer: Debian QA Group Changed-By: Boyuan Yang Description: easyh10 - Utility to manage the iRiver H10 music player Changes: easyh10 (1.5-5) unstable; urgency=medium . * QA upload. * Orphan the package. * Rebuild after Debian 11 release. * debian/control: + Bump debhelper compat to v13. + Bump Standards-Version to 4.6.0. + Add Vcs-* fields for git packaging under Debian Salsa GitLab. * debian/rules: Remove unnecessary dh-autoreconf. Checksums-Sha1: d8cc051d80af4c537e9111a4c7336a76f6eaa7c1 165304 easyh10-dbgsym_1.5-5_armhf.deb 42739caf288e5b915adebbe06ff82193086e23d1 5133 easyh10_1.5-5_armhf.buildinfo 65352bbbfb56e6969b9f175d6f29f0d273a07856 47976 easyh10_1.5-5_armhf.deb Checksums-Sha256: aa06447b02035b1dcefed7f6db4098a735763ef624d3a44cc074f5f636836ff1 165304 easyh10-dbgsym_1.5-5_armhf.deb 51916af4cd37cb999a5a3bb9e19bdde6ec92feaeed08fe3c018270626f28c0d2 5133 easyh10_1.5-5_armhf.buildinfo a5ba2e8f2dbbc8159e5eeb263ecd2bb830297ec3bffedd7157b8c29cf996c4e0 47976 easyh10_1.5-5_armhf.deb Files: 983b23d60c86f6bd2c0ba06691d323b3 165304 debug optional easyh10-dbgsym_1.5-5_armhf.deb d46ea8580f0fb2007e318d240e42e895 5133 sound optional easyh10_1.5-5_armhf.buildinfo 0cc251628faee6bdebeed46f915936f8 47976 sound optional easyh10_1.5-5_armhf.deb Fri May 5 12:49:20 UTC 2023 I: diffoscope 241 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/easyh10_1.5-5.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/easyh10_1.5-5.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/easyh10_1.5-5.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/b1/easyh10_1.5-5_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/b2/easyh10_1.5-5_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.405s) 0.404s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.023s) 0.023s 12 calls diffoscope.comparators.binary.FilesystemFile 0.000s 10 calls abc.DotChangesFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Fri May 5 12:49:21 UTC 2023 I: diffoscope 241 found no differences in the changes files, and a .buildinfo file also exists. Fri May 5 12:49:21 UTC 2023 I: easyh10 from bookworm built successfully and reproducibly on armhf. Fri May 5 12:49:22 UTC 2023 I: Submitting .buildinfo files to external archives: Fri May 5 12:49:22 UTC 2023 I: Submitting 8.0K b1/easyh10_1.5-5_armhf.buildinfo.asc Fri May 5 12:49:23 UTC 2023 I: Submitting 8.0K b2/easyh10_1.5-5_armhf.buildinfo.asc Fri May 5 12:49:24 UTC 2023 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 5 12:49:24 UTC 2023 I: Done submitting .buildinfo files. Fri May 5 12:49:24 UTC 2023 I: Removing signed easyh10_1.5-5_armhf.buildinfo.asc files: removed './b1/easyh10_1.5-5_armhf.buildinfo.asc' removed './b2/easyh10_1.5-5_armhf.buildinfo.asc'