Wed May 17 17:10:33 UTC 2023 I: starting to build ucspi-unix/bookworm/arm64 on jenkins on '2023-05-17 17:10' Wed May 17 17:10:33 UTC 2023 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_18/14166/console.log Wed May 17 17:10:33 UTC 2023 I: Downloading source for bookworm/ucspi-unix=1.0-2 --2023-05-17 17:10:33-- http://cdn-fastly.deb.debian.org/debian/pool/main/u/ucspi-unix/ucspi-unix_1.0-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2461 (2.4K) [text/prs.lines.tag] Saving to: ‘ucspi-unix_1.0-2.dsc’ 0K .. 100% 18.3M=0s 2023-05-17 17:10:33 (18.3 MB/s) - ‘ucspi-unix_1.0-2.dsc’ saved [2461/2461] Wed May 17 17:10:33 UTC 2023 I: ucspi-unix_1.0-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: ucspi-unix Binary: ucspi-unix Architecture: any Version: 1.0-2 Maintainer: Peter Pentchev Homepage: https://untroubled.org/ucspi-unix Standards-Version: 4.6.2 Testsuite: autopkgtest Testsuite-Triggers: python3-all, python3-utf8-locale Build-Depends: debhelper-compat (= 13), dh-buildinfo, dh-sequence-single-binary, groff, libbg-dev, man-db, dietlibc-dev [alpha amd64 arm64 armeb armel armhf hppa i386 mips mipsel mips64el powerpc powerpcspe ppc64 ppc64el s390x sparc64 x32] , python3 , python3-utf8-locale Package-List: ucspi-unix deb net optional arch=any Checksums-Sha1: 87c1a2de9f1bc33a463070e2c040f19338e5937a 17391 ucspi-unix_1.0.orig.tar.gz 7e83fe89883a740f24ba20316591a6eda989b672 1221 ucspi-unix_1.0.orig.tar.gz.asc 3e0339350011152f71c2da864b3f00e8b81a767c 32600 ucspi-unix_1.0-2.debian.tar.xz Checksums-Sha256: 5a1a19f891668ff041fc16a4bf77abeb3cb4380cdaab6ffae5a7f89ab599dd37 17391 ucspi-unix_1.0.orig.tar.gz 25308faa832b3a3c8e5a5b40753f2e1d3ea7577c11847fd375b378c94820d00c 1221 ucspi-unix_1.0.orig.tar.gz.asc 7d4fe4d7f52b53fecb8ede948c7f411f49a68644444845cc727b83e88cb217f0 32600 ucspi-unix_1.0-2.debian.tar.xz Files: 071271a4c8f571bdd8255240cf252884 17391 ucspi-unix_1.0.orig.tar.gz 722ef37f85c4f9fec5902e7e1656b568 1221 ucspi-unix_1.0.orig.tar.gz.asc fc086272e2d8f1e4b8e13391a4539c5b 32600 ucspi-unix_1.0-2.debian.tar.xz Dgit: d78bcc9154db7850b8cc34b998fa28deb569affa debian archive/debian/1.0-2 https://git.dgit.debian.org/ucspi-unix -----BEGIN PGP SIGNATURE----- iQJEBAEBCgAuFiEELuenpRf8EkzxFcNUZR7vsCUn3xMFAmO26UAQHHJvYW1AZGVi aWFuLm9yZwAKCRBlHu+wJSffE27UEADRsBFU61IvawzvBz4cgkIWcN2IPvCkkGi/ sOngpypjpUQl6Xj2Ltl9SQHFU0tbGMeHWcRNsWXACFtEmO6zu4SW5VEfHERZa+Lc uI1tmaKgj6rKEzQrnlueYxkdZT24h+UURcyDQ6pxw8Gnrdnyk1ZRQXUx3hJhoeWI OCUu9US4ugGoMrltREQVGMYmvDgCXBVnJz9irWHWgWBWIfZO2p4e4r7Xc0RCwmiU jziUUPk5WWDPxLe2gM/OKafgx9M2xb35LrnJ3GUUlnrPe7YtWKL7W2sJicp2EM1R nga+sABApJNLdD4cvaTpTY/3Po1qybM+Cd3svSQbZhqA93r8ZOnS29ne99yuBk8G qzwInKSgWE7EJJ7QfJs0c3V5DmJJ1yE8s3tvtIldUUUN4SExrXpOPKeyeUjOzuPh 2mzpJECBdK12drJD4nAGuUZ1yslVyfCSVU6yQL0DfLLo7YvQA5jhwt2r+PVmLOm8 sAwdmPkKoEOpc/TDKQnNRIcNXHxSeyfxmSHPMLhDey4O2OSGwBupFVq8+cWTBV81 uGnDw4V3po89VkD/XGydq2cR5gY8RZrtZm4/e/mEwgoUGwYId3mxHjbsSvaBZ6ZS yp2fdcpaEoTj0ZfjD123BFs1upzdyog9pozseGO3vcL5MUFgVrFYJb5gQKjsHyyX FkTLdogb3w== =1wOw -----END PGP SIGNATURE----- Wed May 17 17:10:33 UTC 2023 I: Checking whether the package is not for us Wed May 17 17:10:33 UTC 2023 I: Starting 1st build on remote node codethink13-arm64.debian.net. Wed May 17 17:10:33 UTC 2023 I: Preparing to do remote build '1' on codethink13-arm64.debian.net. Wed May 17 17:11:30 UTC 2023 I: Deleting $TMPDIR on codethink13-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Jun 18 11:33:37 -12 2024 I: pbuilder-time-stamp: 1718753617 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [ucspi-unix_1.0-2.dsc] I: copying [./ucspi-unix_1.0.orig.tar.gz] I: copying [./ucspi-unix_1.0.orig.tar.gz.asc] I: copying [./ucspi-unix_1.0-2.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Jan 5 03:14:08 2023 -12 gpgv: using RSA key 2EE7A7A517FC124CF115C354651EEFB02527DF13 gpgv: issuer "roam@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./ucspi-unix_1.0-2.dsc: no acceptable signature found dpkg-source: info: extracting ucspi-unix in ucspi-unix-1.0 dpkg-source: info: unpacking ucspi-unix_1.0.orig.tar.gz dpkg-source: info: unpacking ucspi-unix_1.0-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix-getopt-string.patch dpkg-source: info: applying line-buffered.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/8162/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=8 ' DISTRIBUTION='bookworm' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='8162' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.FFAyFl9o/pbuilderrc_vJBT --distribution bookworm --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.FFAyFl9o/b1 --logfile b1/build.log ucspi-unix_1.0-2.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink13-arm64 4.15.0-211-generic #222-Ubuntu SMP Tue Apr 18 18:58:27 UTC 2023 aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 18 04:48 /bin -> usr/bin I: user script /srv/workspace/pbuilder/8162/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-buildinfo, dh-sequence-single-binary, groff, libbg-dev, man-db, dietlibc-dev, python3, python3-utf8-locale dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-buildinfo; however: Package dh-buildinfo is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-single-binary; however: Package dh-sequence-single-binary is not installed. pbuilder-satisfydepends-dummy depends on groff; however: Package groff is not installed. pbuilder-satisfydepends-dummy depends on libbg-dev; however: Package libbg-dev is not installed. pbuilder-satisfydepends-dummy depends on man-db; however: Package man-db is not installed. pbuilder-satisfydepends-dummy depends on dietlibc-dev; however: Package dietlibc-dev is not installed. pbuilder-satisfydepends-dummy depends on python3; however: Package python3 is not installed. pbuilder-satisfydepends-dummy depends on python3-utf8-locale; however: Package python3-utf8-locale is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-buildinfo{a} dh-strip-nondeterminism{a} dietlibc-dev{a} dwz{a} file{a} gettext{a} gettext-base{a} groff{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbg-dev{a} libbg2{a} libbsd0{a} libdebhelper-perl{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libice6{a} libicu72{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline8{a} libsm6{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libx11-6{a} libx11-data{a} libxau6{a} libxaw7{a} libxcb1{a} libxdmcp6{a} libxext6{a} libxml2{a} libxmu6{a} libxpm4{a} libxt6{a} m4{a} man-db{a} media-types{a} po-debconf{a} python3{a} python3-minimal{a} python3-utf8-locale{a} python3.11{a} python3.11-minimal{a} readline-common{a} sensible-utils{a} x11-common{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl ghostscript graphicsmagick-imagemagick-compat imagemagick imagemagick-6.q16 libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libpaper1 lynx netpbm psutils wget 0 packages upgraded, 61 newly installed, 0 to remove and 0 not upgraded. Need to get 30.1 MB of archives. After unpacking 120 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bookworm/main arm64 libpython3.11-minimal arm64 3.11.2-6 [806 kB] Get: 2 http://deb.debian.org/debian bookworm/main arm64 libexpat1 arm64 2.5.0-1 [84.8 kB] Get: 3 http://deb.debian.org/debian bookworm/main arm64 python3.11-minimal arm64 3.11.2-6 [1858 kB] Get: 4 http://deb.debian.org/debian bookworm/main arm64 python3-minimal arm64 3.11.2-1+b1 [26.3 kB] Get: 5 http://deb.debian.org/debian bookworm/main arm64 media-types all 10.0.0 [26.1 kB] Get: 6 http://deb.debian.org/debian bookworm/main arm64 readline-common all 8.2-1.3 [69.0 kB] Get: 7 http://deb.debian.org/debian bookworm/main arm64 libreadline8 arm64 8.2-1.3 [155 kB] Get: 8 http://deb.debian.org/debian bookworm/main arm64 libpython3.11-stdlib arm64 3.11.2-6 [1747 kB] Get: 9 http://deb.debian.org/debian bookworm/main arm64 python3.11 arm64 3.11.2-6 [572 kB] Get: 10 http://deb.debian.org/debian bookworm/main arm64 libpython3-stdlib arm64 3.11.2-1+b1 [9296 B] Get: 11 http://deb.debian.org/debian bookworm/main arm64 python3 arm64 3.11.2-1+b1 [26.3 kB] Get: 12 http://deb.debian.org/debian bookworm/main arm64 sensible-utils all 0.0.17+nmu1 [19.0 kB] Get: 13 http://deb.debian.org/debian bookworm/main arm64 libmagic-mgc arm64 1:5.44-3 [305 kB] Get: 14 http://deb.debian.org/debian bookworm/main arm64 libmagic1 arm64 1:5.44-3 [98.5 kB] Get: 15 http://deb.debian.org/debian bookworm/main arm64 file arm64 1:5.44-3 [42.5 kB] Get: 16 http://deb.debian.org/debian bookworm/main arm64 gettext-base arm64 0.21-12 [159 kB] Get: 17 http://deb.debian.org/debian bookworm/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 18 http://deb.debian.org/debian bookworm/main arm64 groff-base arm64 1.22.4-10 [861 kB] Get: 19 http://deb.debian.org/debian bookworm/main arm64 bsdextrautils arm64 2.38.1-5+b1 [86.9 kB] Get: 20 http://deb.debian.org/debian bookworm/main arm64 libpipeline1 arm64 1.5.7-1 [36.4 kB] Get: 21 http://deb.debian.org/debian bookworm/main arm64 man-db arm64 2.11.2-2 [1369 kB] Get: 22 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB] Get: 23 http://deb.debian.org/debian bookworm/main arm64 autoconf all 2.71-3 [332 kB] Get: 24 http://deb.debian.org/debian bookworm/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 25 http://deb.debian.org/debian bookworm/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 26 http://deb.debian.org/debian bookworm/main arm64 autopoint all 0.21-12 [495 kB] Get: 27 http://deb.debian.org/debian bookworm/main arm64 libdebhelper-perl all 13.11.4 [81.2 kB] Get: 28 http://deb.debian.org/debian bookworm/main arm64 libtool all 2.4.7-5 [517 kB] Get: 29 http://deb.debian.org/debian bookworm/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 30 http://deb.debian.org/debian bookworm/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 31 http://deb.debian.org/debian bookworm/main arm64 libsub-override-perl all 0.09-4 [9304 B] Get: 32 http://deb.debian.org/debian bookworm/main arm64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 33 http://deb.debian.org/debian bookworm/main arm64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 34 http://deb.debian.org/debian bookworm/main arm64 libelf1 arm64 0.188-2.1 [173 kB] Get: 35 http://deb.debian.org/debian bookworm/main arm64 dwz arm64 0.15-1 [101 kB] Get: 36 http://deb.debian.org/debian bookworm/main arm64 libicu72 arm64 72.1-3 [9204 kB] Get: 37 http://deb.debian.org/debian bookworm/main arm64 libxml2 arm64 2.9.14+dfsg-1.2 [620 kB] Get: 38 http://deb.debian.org/debian bookworm/main arm64 gettext arm64 0.21-12 [1248 kB] Get: 39 http://deb.debian.org/debian bookworm/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 40 http://deb.debian.org/debian bookworm/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 41 http://deb.debian.org/debian bookworm/main arm64 debhelper all 13.11.4 [942 kB] Get: 42 http://deb.debian.org/debian bookworm/main arm64 dh-buildinfo all 0.11+nmu2 [18.4 kB] Get: 43 http://deb.debian.org/debian bookworm/main arm64 dietlibc-dev arm64 0.34~cvs20160606-14 [399 kB] Get: 44 http://deb.debian.org/debian bookworm/main arm64 libxau6 arm64 1:1.0.9-1 [19.7 kB] Get: 45 http://deb.debian.org/debian bookworm/main arm64 libbsd0 arm64 0.11.7-2 [115 kB] Get: 46 http://deb.debian.org/debian bookworm/main arm64 libxdmcp6 arm64 1:1.1.2-3 [25.4 kB] Get: 47 http://deb.debian.org/debian bookworm/main arm64 libxcb1 arm64 1.15-1 [143 kB] Get: 48 http://deb.debian.org/debian bookworm/main arm64 libx11-data all 2:1.8.4-2 [292 kB] Get: 49 http://deb.debian.org/debian bookworm/main arm64 libx11-6 arm64 2:1.8.4-2 [736 kB] Get: 50 http://deb.debian.org/debian bookworm/main arm64 libxext6 arm64 2:1.3.4-1+b1 [51.7 kB] Get: 51 http://deb.debian.org/debian bookworm/main arm64 x11-common all 1:7.7+23 [252 kB] Get: 52 http://deb.debian.org/debian bookworm/main arm64 libice6 arm64 2:1.0.10-1 [55.6 kB] Get: 53 http://deb.debian.org/debian bookworm/main arm64 libsm6 arm64 2:1.2.3-1 [34.0 kB] Get: 54 http://deb.debian.org/debian bookworm/main arm64 libxt6 arm64 1:1.2.1-1.1 [172 kB] Get: 55 http://deb.debian.org/debian bookworm/main arm64 libxmu6 arm64 2:1.1.3-3 [57.2 kB] Get: 56 http://deb.debian.org/debian bookworm/main arm64 libxpm4 arm64 1:3.5.12-1.1 [45.2 kB] Get: 57 http://deb.debian.org/debian bookworm/main arm64 libxaw7 arm64 2:1.0.14-1 [184 kB] Get: 58 http://deb.debian.org/debian bookworm/main arm64 groff arm64 1.22.4-10 [3354 kB] Get: 59 http://deb.debian.org/debian bookworm/main arm64 libbg2 arm64 2.04+dfsg-2.1 [178 kB] Get: 60 http://deb.debian.org/debian bookworm/main arm64 libbg-dev arm64 2.04+dfsg-2.1 [236 kB] Get: 61 http://deb.debian.org/debian bookworm/main arm64 python3-utf8-locale all 1.0.0-2 [8780 B] Fetched 30.1 MB in 1s (39.4 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.2-6_arm64.deb ... Unpacking libpython3.11-minimal:arm64 (3.11.2-6) ... Selecting previously unselected package libexpat1:arm64. Preparing to unpack .../libexpat1_2.5.0-1_arm64.deb ... Unpacking libexpat1:arm64 (2.5.0-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.2-6_arm64.deb ... Unpacking python3.11-minimal (3.11.2-6) ... Setting up libpython3.11-minimal:arm64 (3.11.2-6) ... Setting up libexpat1:arm64 (2.5.0-1) ... Setting up python3.11-minimal (3.11.2-6) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19932 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.2-1+b1_arm64.deb ... Unpacking python3-minimal (3.11.2-1+b1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.0.0_all.deb ... Unpacking media-types (10.0.0) ... Selecting previously unselected package readline-common. Preparing to unpack .../2-readline-common_8.2-1.3_all.deb ... Unpacking readline-common (8.2-1.3) ... Selecting previously unselected package libreadline8:arm64. Preparing to unpack .../3-libreadline8_8.2-1.3_arm64.deb ... Unpacking libreadline8:arm64 (8.2-1.3) ... Selecting previously unselected package libpython3.11-stdlib:arm64. Preparing to unpack .../4-libpython3.11-stdlib_3.11.2-6_arm64.deb ... Unpacking libpython3.11-stdlib:arm64 (3.11.2-6) ... Selecting previously unselected package python3.11. Preparing to unpack .../5-python3.11_3.11.2-6_arm64.deb ... Unpacking python3.11 (3.11.2-6) ... Selecting previously unselected package libpython3-stdlib:arm64. Preparing to unpack .../6-libpython3-stdlib_3.11.2-1+b1_arm64.deb ... Unpacking libpython3-stdlib:arm64 (3.11.2-1+b1) ... Setting up python3-minimal (3.11.2-1+b1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20366 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.2-1+b1_arm64.deb ... Unpacking python3 (3.11.2-1+b1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.44-3_arm64.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../03-libmagic1_1%3a5.44-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.44-3_arm64.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.21-12_arm64.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../06-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.22.4-10_arm64.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.38.1-5+b1_arm64.deb ... Unpacking bsdextrautils (2.38.1-5+b1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../09-libpipeline1_1.5.7-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.11.2-2_arm64.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-3_arm64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../23-libelf1_0.188-2.1_arm64.deb ... Unpacking libelf1:arm64 (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.15-1_arm64.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../25-libicu72_72.1-3_arm64.deb ... Unpacking libicu72:arm64 (72.1-3) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.9.14+dfsg-1.2_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.2) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-12_arm64.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package dh-buildinfo. Preparing to unpack .../31-dh-buildinfo_0.11+nmu2_all.deb ... Unpacking dh-buildinfo (0.11+nmu2) ... Selecting previously unselected package dietlibc-dev:arm64. Preparing to unpack .../32-dietlibc-dev_0.34~cvs20160606-14_arm64.deb ... Unpacking dietlibc-dev:arm64 (0.34~cvs20160606-14) ... Selecting previously unselected package libxau6:arm64. Preparing to unpack .../33-libxau6_1%3a1.0.9-1_arm64.deb ... Unpacking libxau6:arm64 (1:1.0.9-1) ... Selecting previously unselected package libbsd0:arm64. Preparing to unpack .../34-libbsd0_0.11.7-2_arm64.deb ... Unpacking libbsd0:arm64 (0.11.7-2) ... Selecting previously unselected package libxdmcp6:arm64. Preparing to unpack .../35-libxdmcp6_1%3a1.1.2-3_arm64.deb ... Unpacking libxdmcp6:arm64 (1:1.1.2-3) ... Selecting previously unselected package libxcb1:arm64. Preparing to unpack .../36-libxcb1_1.15-1_arm64.deb ... Unpacking libxcb1:arm64 (1.15-1) ... Selecting previously unselected package libx11-data. Preparing to unpack .../37-libx11-data_2%3a1.8.4-2_all.deb ... Unpacking libx11-data (2:1.8.4-2) ... Selecting previously unselected package libx11-6:arm64. Preparing to unpack .../38-libx11-6_2%3a1.8.4-2_arm64.deb ... Unpacking libx11-6:arm64 (2:1.8.4-2) ... Selecting previously unselected package libxext6:arm64. Preparing to unpack .../39-libxext6_2%3a1.3.4-1+b1_arm64.deb ... Unpacking libxext6:arm64 (2:1.3.4-1+b1) ... Selecting previously unselected package x11-common. Preparing to unpack .../40-x11-common_1%3a7.7+23_all.deb ... Unpacking x11-common (1:7.7+23) ... Selecting previously unselected package libice6:arm64. Preparing to unpack .../41-libice6_2%3a1.0.10-1_arm64.deb ... Unpacking libice6:arm64 (2:1.0.10-1) ... Selecting previously unselected package libsm6:arm64. Preparing to unpack .../42-libsm6_2%3a1.2.3-1_arm64.deb ... Unpacking libsm6:arm64 (2:1.2.3-1) ... Selecting previously unselected package libxt6:arm64. Preparing to unpack .../43-libxt6_1%3a1.2.1-1.1_arm64.deb ... Unpacking libxt6:arm64 (1:1.2.1-1.1) ... Selecting previously unselected package libxmu6:arm64. Preparing to unpack .../44-libxmu6_2%3a1.1.3-3_arm64.deb ... Unpacking libxmu6:arm64 (2:1.1.3-3) ... Selecting previously unselected package libxpm4:arm64. Preparing to unpack .../45-libxpm4_1%3a3.5.12-1.1_arm64.deb ... Unpacking libxpm4:arm64 (1:3.5.12-1.1) ... Selecting previously unselected package libxaw7:arm64. Preparing to unpack .../46-libxaw7_2%3a1.0.14-1_arm64.deb ... Unpacking libxaw7:arm64 (2:1.0.14-1) ... Selecting previously unselected package groff. Preparing to unpack .../47-groff_1.22.4-10_arm64.deb ... Unpacking groff (1.22.4-10) ... Selecting previously unselected package libbg2. Preparing to unpack .../48-libbg2_2.04+dfsg-2.1_arm64.deb ... Unpacking libbg2 (2.04+dfsg-2.1) ... Selecting previously unselected package libbg-dev. Preparing to unpack .../49-libbg-dev_2.04+dfsg-2.1_arm64.deb ... Unpacking libbg-dev (2.04+dfsg-2.1) ... Selecting previously unselected package python3-utf8-locale. Preparing to unpack .../50-python3-utf8-locale_1.0.0-2_all.deb ... Unpacking python3-utf8-locale (1.0.0-2) ... Setting up media-types (10.0.0) ... Setting up libpipeline1:arm64 (1.5.7-1) ... Setting up libxau6:arm64 (1:1.0.9-1) ... Setting up libicu72:arm64 (72.1-3) ... Setting up bsdextrautils (2.38.1-5+b1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up x11-common (1:7.7+23) ... invoke-rc.d: could not determine current runlevel Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Setting up libmagic1:arm64 (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up autotools-dev (20220109.1) ... Setting up libx11-data (2:1.8.4-2) ... Setting up autopoint (0.21-12) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-4) ... Setting up dietlibc-dev:arm64 (0.34~cvs20160606-14) ... update-alternatives: using /usr/lib/aarch64-linux-gnu/diet/lib-aarch64 to provide /usr/lib/diet/lib-aarch64 (dietlibc-libdir-aarch64) in auto mode update-alternatives: using /usr/lib/aarch64-linux-gnu/diet/bin/diet to provide /usr/bin/diet (diet) in auto mode Setting up libbsd0:arm64 (0.11.7-2) ... Setting up libelf1:arm64 (0.188-2.1) ... Setting up libbg2 (2.04+dfsg-2.1) ... Setting up readline-common (8.2-1.3) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libice6:arm64 (2:1.0.10-1) ... Setting up libxdmcp6:arm64 (1:1.1.2-3) ... Setting up libxcb1:arm64 (1.15-1) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up libreadline8:arm64 (8.2-1.3) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up libx11-6:arm64 (2:1.8.4-2) ... Setting up libbg-dev (2.04+dfsg-2.1) ... Setting up libsm6:arm64 (2:1.2.3-1) ... Setting up libxpm4:arm64 (1:3.5.12-1.1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:arm64 (3.11.2-6) ... Setting up libxext6:arm64 (2:1.3.4-1+b1) ... Setting up man-db (2.11.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libxt6:arm64 (1:1.2.1-1.1) ... Setting up libpython3-stdlib:arm64 (3.11.2-1+b1) ... Setting up python3.11 (3.11.2-6) ... Setting up libxmu6:arm64 (2:1.1.3-3) ... Setting up debhelper (13.11.4) ... Setting up python3 (3.11.2-1+b1) ... Setting up libxaw7:arm64 (2:1.0.14-1) ... Setting up groff (1.22.4-10) ... Setting up dh-buildinfo (0.11+nmu2) ... Setting up python3-utf8-locale (1.0.0-2) ... Processing triggers for libc-bin (2.36-9) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/ucspi-unix-1.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../ucspi-unix_1.0-2_source.changes dpkg-buildpackage: info: source package ucspi-unix dpkg-buildpackage: info: source version 1.0-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Peter Pentchev dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean --with buildinfo debian/rules override_dh_auto_clean make[1]: Entering directory '/build/ucspi-unix-1.0' rm -fr glibc/ diet/ make[1]: Leaving directory '/build/ucspi-unix-1.0' dh_clean debian/rules binary dh binary --with buildinfo dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_configure make[1]: Entering directory '/build/ucspi-unix-1.0' mkdir -p diet glibc find -maxdepth 1 -type f -printf '../%f\0' | xargs -0 ln -sft diet/ find -maxdepth 1 -type f -printf '../%f\0' | xargs -0 ln -sft glibc/ rm diet/conf-* glibc/conf-* echo 'cc -g -O2 -ffile-prefix-map=/build/ucspi-unix-1.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' > glibc/conf-cc echo 'cc -Wl,-z,relro -Wl,-z,now ' > glibc/conf-ld echo 'diet gcc -g -O2 -ffile-prefix-map=/build/ucspi-unix-1.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' > diet/conf-cc echo 'diet gcc -Wl,-z,relro -Wl,-z,now ' > diet/conf-ld make[1]: Leaving directory '/build/ucspi-unix-1.0' debian/rules override_dh_auto_build make[1]: Entering directory '/build/ucspi-unix-1.0' /usr/bin/make -C diet make[2]: Entering directory '/build/ucspi-unix-1.0/diet' ( echo '#!/bin/sh'; \ echo 'source=$1; shift'; \ echo 'base=`echo "$source" | sed -e s:\\\\.c$::`'; \ echo exec `head -n 1 conf-cc` -I. '-o ${base}.o -c $source ${1+"$@"}'; \ ) >compile chmod 755 compile ./compile unixclient.c ( echo '#!/bin/sh';\ echo 'main="$1"; shift';\ echo exec `head -n 1 conf-ld` -L. '-o "$main" "$main.o" ${1+"$@"}'; \ ) >load chmod 755 load ( ( ./compile trypeercred.c && ./load trypeercred; ) && cat haspeercred.h1 || cat haspeercred.h0 ) > haspeercred.h ./compile env.c ./compile utoa.c Checking for socket libraries: no ./load unixclient env.o utoa.o `cat socket.lib` /usr/bin/ld: env.o: in function `setup_env': ./diet/./diet/env.c:14: warning: setenv calls malloc. Avoid it in small programs. /usr/bin/ld: /usr/lib/aarch64-linux-gnu/diet/lib-aarch64/libc.a(vfprintf.o): in function `vfprintf': (.text+0x50): warning: warning: the printf functions add several kilobytes of bloat. /usr/bin/ld: /usr/lib/aarch64-linux-gnu/diet/lib-aarch64/libc.a(stderr.o): in function `__fflush_stderr': (.text+0x8): warning: warning: your code uses stdio (7+k bloat). ( ( ./compile trywaitp.c && ./load trywaitp; ) && cat haswaitp.h1 || cat haswaitp.h0 ) > haswaitp.h ./compile unixserver.c ./load unixserver env.o utoa.o `cat socket.lib` /usr/bin/ld: unixserver.o: in function `log_child_exit': ./diet/./diet/unixserver.c:80: warning: warning: your code uses stdio (7+k bloat). /usr/bin/ld: env.o: in function `setup_env': ./diet/./diet/env.c:14: warning: setenv calls malloc. Avoid it in small programs. /usr/bin/ld: /usr/lib/aarch64-linux-gnu/diet/lib-aarch64/libc.a(vfprintf.o): in function `vfprintf': (.text+0x50): warning: warning: the printf functions add several kilobytes of bloat. cat warn-auto.sh unixcat.sh >unixcat chmod 755 unixcat make[2]: Leaving directory '/build/ucspi-unix-1.0/diet' /usr/bin/make -C glibc make[2]: Entering directory '/build/ucspi-unix-1.0/glibc' ( echo '#!/bin/sh'; \ echo 'source=$1; shift'; \ echo 'base=`echo "$source" | sed -e s:\\\\.c$::`'; \ echo exec `head -n 1 conf-cc` -I. '-o ${base}.o -c $source ${1+"$@"}'; \ ) >compile chmod 755 compile ./compile unixclient.c ( echo '#!/bin/sh';\ echo 'main="$1"; shift';\ echo exec `head -n 1 conf-ld` -L. '-o "$main" "$main.o" ${1+"$@"}'; \ ) >load chmod 755 load ( ( ./compile trypeercred.c && ./load trypeercred; ) && cat haspeercred.h1 || cat haspeercred.h0 ) > haspeercred.h ./compile env.c ./compile utoa.c Checking for socket libraries: no ./load unixclient env.o utoa.o `cat socket.lib` ( ( ./compile trywaitp.c && ./load trywaitp; ) && cat haswaitp.h1 || cat haswaitp.h0 ) > haswaitp.h ./compile unixserver.c ./load unixserver env.o utoa.o `cat socket.lib` cat warn-auto.sh unixcat.sh >unixcat chmod 755 unixcat make[2]: Leaving directory '/build/ucspi-unix-1.0/glibc' make[1]: Leaving directory '/build/ucspi-unix-1.0' debian/rules override_dh_auto_test make[1]: Entering directory '/build/ucspi-unix-1.0' env PYTHONPATH='/build/ucspi-unix-1.0/debian/tests/python' python3 -B -u -m ucspi_unix_test -d '/build/ucspi-unix-1.0/diet' -p unix unix.find_listening_address() starting === Testing unixcat - test skipped, unixcat will probably not find /build/ucspi-unix-1.0/diet/unixclient === Testing unixclient against our own listening socket - will spawn unixclient at /build/ucspi-unix-1.0/diet/unixclient in a while - test_local_client_spew: setting up a listening socket at /tmp/ucspi-unix-test.u7glcdny/listen.sock - test_local_client_spew: starting /build/ucspi-unix-1.0/diet/unixclient /tmp/ucspi-unix-test.u7glcdny/listen.sock sh -c 'set -e; exec <&6; exec cat' - started the client as pid 10077 - waiting for a connection at /tmp/ucspi-unix-test.u7glcdny/listen.sock - accepted a connection at fd 5 from - closing the incoming connection - client exit code: 0; output: 'a01 hello\na02 bye\n' - /build/ucspi-unix-1.0/diet/unixclient seems fine === Testing unixserver against our own listening socket - will spawn unixserver at /build/ucspi-unix-1.0/diet/unixserver in a while - test_server_local: starting stdbuf -oL -eL -- /build/ucspi-unix-1.0/diet/unixserver -v /tmp/ucspi-unix-test.u7glcdny/listen.sock printf -- 'a01 hello\na02 bye\n' - awaiting the first 'status' line from unixserver - test_server_local: setting up a socket connected to /tmp/ucspi-unix-test.u7glcdny/listen.sock - got a connection at fd 4 to /tmp/ucspi-unix-test.u7glcdny/listen.sock - reading all the data we can - read 18 bytes from the socket - read 0 bytes from the socket - read a total of 18 bytes from the socket - sending a SIGTERM signal to the unixserver process - waiting for the unixserver process to exit - test_server_local: /build/ucspi-unix-1.0/diet/unixserver seems fine === Testing unixserver against unixclient - will spawn unixserver at /build/ucspi-unix-1.0/diet/unixserver in a while - will spawn unixclient at /build/ucspi-unix-1.0/diet/unixclient in a while - test_server_client_spew: starting stdbuf -oL -eL -- /build/ucspi-unix-1.0/diet/unixserver -v /tmp/ucspi-unix-test.u7glcdny/listen.sock printf -- 'a01 hello\na02 bye\n' - awaiting the first 'status' line from unixserver - test_server_client_spew: starting /build/ucspi-unix-1.0/diet/unixclient /tmp/ucspi-unix-test.u7glcdny/listen.sock sh -c 'set -e; exec <&6; exec cat' - client exit code 0; output 'a01 hello\na02 bye\n' - sending a SIGTERM signal to the unixserver process - waiting for the unixserver process to exit - /build/ucspi-unix-1.0/diet/unixserver seems fine === The tests for unix passed env PYTHONPATH='/build/ucspi-unix-1.0/debian/tests/python' python3 -B -u -m ucspi_unix_test -d '/build/ucspi-unix-1.0/glibc' -p unix unix.find_listening_address() starting === Testing unixcat - test skipped, unixcat will probably not find /build/ucspi-unix-1.0/glibc/unixclient === Testing unixclient against our own listening socket - will spawn unixclient at /build/ucspi-unix-1.0/glibc/unixclient in a while - test_local_client_spew: setting up a listening socket at /tmp/ucspi-unix-test.fthlqfca/listen.sock - test_local_client_spew: starting /build/ucspi-unix-1.0/glibc/unixclient /tmp/ucspi-unix-test.fthlqfca/listen.sock sh -c 'set -e; exec <&6; exec cat' - started the client as pid 10085 - waiting for a connection at /tmp/ucspi-unix-test.fthlqfca/listen.sock - accepted a connection at fd 5 from - closing the incoming connection - client exit code: 0; output: 'a01 hello\na02 bye\n' - /build/ucspi-unix-1.0/glibc/unixclient seems fine === Testing unixserver against our own listening socket - will spawn unixserver at /build/ucspi-unix-1.0/glibc/unixserver in a while - test_server_local: starting stdbuf -oL -eL -- /build/ucspi-unix-1.0/glibc/unixserver -v /tmp/ucspi-unix-test.fthlqfca/listen.sock printf -- 'a01 hello\na02 bye\n' - awaiting the first 'status' line from unixserver - test_server_local: setting up a socket connected to /tmp/ucspi-unix-test.fthlqfca/listen.sock - got a connection at fd 4 to /tmp/ucspi-unix-test.fthlqfca/listen.sock - reading all the data we can - read 18 bytes from the socket - read 0 bytes from the socket - read a total of 18 bytes from the socket - sending a SIGTERM signal to the unixserver process - waiting for the unixserver process to exit - test_server_local: /build/ucspi-unix-1.0/glibc/unixserver seems fine === Testing unixserver against unixclient - will spawn unixserver at /build/ucspi-unix-1.0/glibc/unixserver in a while - will spawn unixclient at /build/ucspi-unix-1.0/glibc/unixclient in a while - test_server_client_spew: starting stdbuf -oL -eL -- /build/ucspi-unix-1.0/glibc/unixserver -v /tmp/ucspi-unix-test.fthlqfca/listen.sock printf -- 'a01 hello\na02 bye\n' - awaiting the first 'status' line from unixserver - test_server_client_spew: starting /build/ucspi-unix-1.0/glibc/unixclient /tmp/ucspi-unix-test.fthlqfca/listen.sock sh -c 'set -e; exec <&6; exec cat' - client exit code 0; output 'a01 hello\na02 bye\n' - sending a SIGTERM signal to the unixserver process - waiting for the unixserver process to exit - /build/ucspi-unix-1.0/glibc/unixserver seems fine === The tests for unix passed make[1]: Leaving directory '/build/ucspi-unix-1.0' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/ucspi-unix-1.0' /usr/bin/make -C glibc install make[2]: Entering directory '/build/ucspi-unix-1.0/glibc' install -d /build/ucspi-unix-1.0/debian/ucspi-unix/usr/bin install -m 755 unixcat unixclient unixserver /build/ucspi-unix-1.0/debian/ucspi-unix/usr/bin install -d /build/ucspi-unix-1.0/debian/ucspi-unix/usr/share/man/man1 install -m 644 unixclient.1 unixserver.1 /build/ucspi-unix-1.0/debian/ucspi-unix/usr/share/man/man1 make[2]: Leaving directory '/build/ucspi-unix-1.0/glibc' make[1]: Leaving directory '/build/ucspi-unix-1.0' dh_installdocs dh_buildinfo dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'ucspi-unix' in '../ucspi-unix_1.0-2_arm64.deb'. dpkg-deb: building package 'ucspi-unix-dbgsym' in '../ucspi-unix-dbgsym_1.0-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../ucspi-unix_1.0-2_arm64.buildinfo dpkg-genchanges --build=binary -O../ucspi-unix_1.0-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/8162 and its subdirectories I: Current time: Tue Jun 18 11:34:29 -12 2024 I: pbuilder-time-stamp: 1718753669 Wed May 17 17:11:31 UTC 2023 I: 1st build successful. Starting 2nd build on remote node codethink12-arm64.debian.net. Wed May 17 17:11:31 UTC 2023 I: Preparing to do remote build '2' on codethink12-arm64.debian.net. Wed May 17 17:12:28 UTC 2023 I: Deleting $TMPDIR on codethink12-arm64.debian.net. Wed May 17 17:12:29 UTC 2023 I: ucspi-unix_1.0-2_arm64.changes: Format: 1.8 Date: Thu, 05 Jan 2023 17:12:42 +0200 Source: ucspi-unix Binary: ucspi-unix ucspi-unix-dbgsym Architecture: arm64 Version: 1.0-2 Distribution: unstable Urgency: medium Maintainer: Peter Pentchev Changed-By: Peter Pentchev Description: ucspi-unix - UNIX-domain socket client-server command-line tools Closes: 983804 991774 Changes: ucspi-unix (1.0-2) unstable; urgency=medium . [ Dmitry Bogatov ] * Add a Gitlab CI config file. . [ Peter Pentchev ] * New maintainer. Closes: #983804 * Only run the dietlibc build if possible. Closes: #991774 * Add my debian/* copyright notice. * Bump the debhelper compat level from 11 to 13 with no changes. * Add an EditorConfig definitions file. * Add the line-buffered patch for unixserver to make sure that parent processes and log processors see each line as it comes. * Run a custom test suite at build time and as an autopkgtest. * Drop the versions in the dh-buildinfo and dietlibc-dev build dependencies, the constraints were satisfied even in oldstable. * Correct the Bug-Debian field of the fix-getopt-string patch. * Declare compliance with Policy 4.6.2 with no changes. * Add Rules-Requires-Root: no to the source control stanza. * Explicitly state dh-sequence-single-binary. Checksums-Sha1: add9552dc6e1a1ee56b748d4beb8545c73568feb 17388 ucspi-unix-dbgsym_1.0-2_arm64.deb e6322406b3bb52b2d6beceab5b3c1882d54ae5d7 6068 ucspi-unix_1.0-2_arm64.buildinfo 806585089cb29d681ac28e5a6740687048b05e32 16496 ucspi-unix_1.0-2_arm64.deb Checksums-Sha256: 69fe1d77e496de8f92b9fa9cde270af4b95b8ca312e941d7db3d398c3676105d 17388 ucspi-unix-dbgsym_1.0-2_arm64.deb 1ac0601c38eec85d463ffaacb88d52d6b87a8edc1bd971050a84d5026935b838 6068 ucspi-unix_1.0-2_arm64.buildinfo aa5dbbe55f1273e344f975f4b6e6ca9239b41b8131fdd272bbf3ed00bcf3526b 16496 ucspi-unix_1.0-2_arm64.deb Files: d1e6def5954b24f569d99f6982129bbc 17388 debug optional ucspi-unix-dbgsym_1.0-2_arm64.deb 6ee96b17f5e452280b7dac98c0c616df 6068 net optional ucspi-unix_1.0-2_arm64.buildinfo 67453a63e0bcd50c74be584a89b77c2a 16496 net optional ucspi-unix_1.0-2_arm64.deb Wed May 17 17:12:30 UTC 2023 I: diffoscope 242 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.FFAyFl9o/ucspi-unix_1.0-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.FFAyFl9o/ucspi-unix_1.0-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.FFAyFl9o/ucspi-unix_1.0-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.FFAyFl9o/b1/ucspi-unix_1.0-2_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.FFAyFl9o/b2/ucspi-unix_1.0-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.429s) 0.429s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.022s) 0.022s 12 calls diffoscope.comparators.binary.FilesystemFile 0.000s 10 calls abc.DotChangesFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Wed May 17 17:12:31 UTC 2023 I: diffoscope 242 found no differences in the changes files, and a .buildinfo file also exists. Wed May 17 17:12:31 UTC 2023 I: ucspi-unix from bookworm built successfully and reproducibly on arm64. Wed May 17 17:12:33 UTC 2023 I: Submitting .buildinfo files to external archives: Wed May 17 17:12:33 UTC 2023 I: Submitting 8.0K b1/ucspi-unix_1.0-2_arm64.buildinfo.asc Wed May 17 17:12:34 UTC 2023 I: Submitting 8.0K b2/ucspi-unix_1.0-2_arm64.buildinfo.asc Wed May 17 17:12:34 UTC 2023 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed May 17 17:12:34 UTC 2023 I: Done submitting .buildinfo files. Wed May 17 17:12:34 UTC 2023 I: Removing signed ucspi-unix_1.0-2_arm64.buildinfo.asc files: removed './b1/ucspi-unix_1.0-2_arm64.buildinfo.asc' removed './b2/ucspi-unix_1.0-2_arm64.buildinfo.asc'