Wed May 3 13:55:23 UTC 2023 I: starting to build spew/bookworm/arm64 on jenkins on '2023-05-03 13:55' Wed May 3 13:55:23 UTC 2023 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_16/23639/console.log Wed May 3 13:55:23 UTC 2023 I: Downloading source for bookworm/spew=1.0.8-1.1 --2023-05-03 13:55:23-- http://cdn-fastly.deb.debian.org/debian/pool/main/s/spew/spew_1.0.8-1.1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1653 (1.6K) [text/prs.lines.tag] Saving to: ‘spew_1.0.8-1.1.dsc’ 0K . 100% 76.9M=0s 2023-05-03 13:55:23 (76.9 MB/s) - ‘spew_1.0.8-1.1.dsc’ saved [1653/1653] Wed May 3 13:55:23 UTC 2023 I: spew_1.0.8-1.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 1.0 Source: spew Binary: spew Architecture: any Version: 1.0.8-1.1 Maintainer: Matt Taggart Standards-Version: 3.8.4 Build-Depends: debhelper (>= 7), libpopt-dev, libncurses5-dev, autotools-dev Package-List: spew deb utils extra arch=any Checksums-Sha1: 5381f080d5445ee3456290148dae7eeb27367507 169071 spew_1.0.8.orig.tar.gz 22e8034ebe78f1309c59cb5b9c295d9a6585cf4a 39549 spew_1.0.8-1.1.diff.gz Checksums-Sha256: 6335458ba7940688e3b8aca7d03ffa392802afa811b8d709ca62328925932a94 169071 spew_1.0.8.orig.tar.gz 7852720db4826b5502d3f716cbde5ede506e63f76510840cc586b0b7e1c68476 39549 spew_1.0.8-1.1.diff.gz Files: f8ec17d5a932a630dd8ad41a4111176f 169071 spew_1.0.8.orig.tar.gz d1aa7a693f6238a3ab98930443a82c75 39549 spew_1.0.8-1.1.diff.gz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEtSLzkVnaB9053AsR9LqqgNsoukwFAmNn4gwACgkQ9LqqgNso ukwuBg/9G6WcDr5X4bUInE/U7mmgjSpjH/p+5wrrduKSKunFkaf1TsLKckTyVSzM VifdYptuCflw7QFEI3oIPDfET5kIsE3C4jPNA813FYl+pD3Jqr3LeM+vgoj2Lq3m m3KAwkPT0umGG1M2SKpjTbvMkiZRmDD8ZXvITVRZCykW6/DDj0OL8VLYS9AmOF6d VnfCEf/TSdcu/zR0yXkhg3P+6F2FACokOTf05kCt/nc8EjpvxX0ph4hMdv9EJSoz wPfAssQ/Y+BXWAIIgGSy9tLUaZ5P48dfFNlYv03CWosDHTXNkzwlptZyrxcJJz9p Ja9stowD0aSrRdSWEmtL/2NsFaqKq85kJoJXayVIB6sgczPRqyZlci8AHRTQQwTc u7G+Rva0d3WwJeA/ZfxZrGYFW5BCkiQtf3oE3+oNR52Fei4OYEz6xNC27A1/R3im 1RZt63ZtMuskNfvMZcw39SLpoa2DJzV8Tn3+uJ/i7yIhN4lCAF9KOt9OGb9dNK/2 VKjmM2V0T2MXp6/CqdYS75FFDQuEKyFnAHbMEEHjWmNpMD7EsajtvNqj2ZMNY8iN pXSrBMPQvrMF9lAmXqXUAtrtzd8o85ClEPX44xw9LYjGRMo/XyePHrOPwaX8MHjR ovKujNLuFqOYWfWBTWQPGGcb1wozAfMCKXIviZhwWlrb1/y8dBo= =0Xqa -----END PGP SIGNATURE----- Wed May 3 13:55:23 UTC 2023 I: Checking whether the package is not for us Wed May 3 13:55:23 UTC 2023 I: Starting 1st build on remote node codethink12-arm64.debian.net. Wed May 3 13:55:23 UTC 2023 I: Preparing to do remote build '1' on codethink12-arm64.debian.net. Wed May 3 13:56:56 UTC 2023 I: Deleting $TMPDIR on codethink12-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed May 3 01:55:29 -12 2023 I: pbuilder-time-stamp: 1683122129 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [spew_1.0.8-1.1.dsc] I: copying [./spew_1.0.8.orig.tar.gz] I: copying [./spew_1.0.8-1.1.diff.gz] I: Extracting source gpgv: Signature made Sun Nov 6 04:34:20 2022 -12 gpgv: using RSA key B522F39159DA07DD39DC0B11F4BAAA80DB28BA4C gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./spew_1.0.8-1.1.dsc: no acceptable signature found dpkg-source: info: extracting spew in spew-1.0.8 dpkg-source: info: unpacking spew_1.0.8.orig.tar.gz dpkg-source: info: applying spew_1.0.8-1.1.diff.gz dpkg-source: info: upstream files that have been modified: spew-1.0.8/config/config.guess spew-1.0.8/config/config.sub spew-1.0.8/man/spew.1.in I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/8904/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=8' DISTRIBUTION='bookworm' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='8904' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RusYTqqT/pbuilderrc_W1H2 --distribution bookworm --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RusYTqqT/b1 --logfile b1/build.log spew_1.0.8-1.1.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink12-arm64 4.15.0-210-generic #221-Ubuntu SMP Tue Apr 18 08:32:48 UTC 2023 aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 2 22:26 /bin -> usr/bin I: user script /srv/workspace/pbuilder/8904/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 7), libpopt-dev, libncurses5-dev, autotools-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 7); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libpopt-dev; however: Package libpopt-dev is not installed. pbuilder-satisfydepends-dummy depends on libncurses5-dev; however: Package libncurses5-dev is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev; however: Package autotools-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1{a} libncurses-dev{a} libncurses5-dev{a} libncurses6{a} libpipeline1{a} libpopt-dev{a} libpopt0{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 18.9 MB of archives. After unpacking 77.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bookworm/main arm64 sensible-utils all 0.0.17+nmu1 [19.0 kB] Get: 2 http://deb.debian.org/debian bookworm/main arm64 libmagic-mgc arm64 1:5.44-3 [305 kB] Get: 3 http://deb.debian.org/debian bookworm/main arm64 libmagic1 arm64 1:5.44-3 [98.5 kB] Get: 4 http://deb.debian.org/debian bookworm/main arm64 file arm64 1:5.44-3 [42.5 kB] Get: 5 http://deb.debian.org/debian bookworm/main arm64 gettext-base arm64 0.21-12 [159 kB] Get: 6 http://deb.debian.org/debian bookworm/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 7 http://deb.debian.org/debian bookworm/main arm64 groff-base arm64 1.22.4-10 [861 kB] Get: 8 http://deb.debian.org/debian bookworm/main arm64 bsdextrautils arm64 2.38.1-5+b1 [86.9 kB] Get: 9 http://deb.debian.org/debian bookworm/main arm64 libpipeline1 arm64 1.5.7-1 [36.4 kB] Get: 10 http://deb.debian.org/debian bookworm/main arm64 man-db arm64 2.11.2-2 [1369 kB] Get: 11 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB] Get: 12 http://deb.debian.org/debian bookworm/main arm64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian bookworm/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian bookworm/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian bookworm/main arm64 autopoint all 0.21-12 [495 kB] Get: 16 http://deb.debian.org/debian bookworm/main arm64 libdebhelper-perl all 13.11.4 [81.2 kB] Get: 17 http://deb.debian.org/debian bookworm/main arm64 libtool all 2.4.7-5 [517 kB] Get: 18 http://deb.debian.org/debian bookworm/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian bookworm/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian bookworm/main arm64 libsub-override-perl all 0.09-4 [9304 B] Get: 21 http://deb.debian.org/debian bookworm/main arm64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian bookworm/main arm64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian bookworm/main arm64 libelf1 arm64 0.188-2.1 [173 kB] Get: 24 http://deb.debian.org/debian bookworm/main arm64 dwz arm64 0.15-1 [101 kB] Get: 25 http://deb.debian.org/debian bookworm/main arm64 libicu72 arm64 72.1-3 [9204 kB] Get: 26 http://deb.debian.org/debian bookworm/main arm64 libxml2 arm64 2.9.14+dfsg-1.2 [620 kB] Get: 27 http://deb.debian.org/debian bookworm/main arm64 gettext arm64 0.21-12 [1248 kB] Get: 28 http://deb.debian.org/debian bookworm/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian bookworm/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian bookworm/main arm64 debhelper all 13.11.4 [942 kB] Get: 31 http://deb.debian.org/debian bookworm/main arm64 libncurses6 arm64 6.4-2 [94.0 kB] Get: 32 http://deb.debian.org/debian bookworm/main arm64 libncurses-dev arm64 6.4-2 [335 kB] Get: 33 http://deb.debian.org/debian bookworm/main arm64 libncurses5-dev arm64 6.4-2 [932 B] Get: 34 http://deb.debian.org/debian bookworm/main arm64 libpopt0 arm64 1.19+dfsg-1 [42.0 kB] Get: 35 http://deb.debian.org/debian bookworm/main arm64 libpopt-dev arm64 1.19+dfsg-1 [46.0 kB] Fetched 18.9 MB in 0s (41.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_arm64.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../02-libmagic1_1%3a5.44-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.44-3_arm64.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-12_arm64.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.22.4-10_arm64.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.38.1-5+b1_arm64.deb ... Unpacking bsdextrautils (2.38.1-5+b1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.7-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.11.2-2_arm64.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-3_arm64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../22-libelf1_0.188-2.1_arm64.deb ... Unpacking libelf1:arm64 (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_arm64.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../24-libicu72_72.1-3_arm64.deb ... Unpacking libicu72:arm64 (72.1-3) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.2_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.2) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-12_arm64.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package libncurses6:arm64. Preparing to unpack .../30-libncurses6_6.4-2_arm64.deb ... Unpacking libncurses6:arm64 (6.4-2) ... Selecting previously unselected package libncurses-dev:arm64. Preparing to unpack .../31-libncurses-dev_6.4-2_arm64.deb ... Unpacking libncurses-dev:arm64 (6.4-2) ... Selecting previously unselected package libncurses5-dev:arm64. Preparing to unpack .../32-libncurses5-dev_6.4-2_arm64.deb ... Unpacking libncurses5-dev:arm64 (6.4-2) ... Selecting previously unselected package libpopt0:arm64. Preparing to unpack .../33-libpopt0_1.19+dfsg-1_arm64.deb ... Unpacking libpopt0:arm64 (1.19+dfsg-1) ... Selecting previously unselected package libpopt-dev:arm64. Preparing to unpack .../34-libpopt-dev_1.19+dfsg-1_arm64.deb ... Unpacking libpopt-dev:arm64 (1.19+dfsg-1) ... Setting up libpipeline1:arm64 (1.5.7-1) ... Setting up libicu72:arm64 (72.1-3) ... Setting up bsdextrautils (2.38.1-5+b1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libmagic1:arm64 (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up autotools-dev (20220109.1) ... Setting up libncurses6:arm64 (6.4-2) ... Setting up autopoint (0.21-12) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-4) ... Setting up libelf1:arm64 (0.188-2.1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.2) ... Setting up libpopt0:arm64 (1.19+dfsg-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up libncurses-dev:arm64 (6.4-2) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up libpopt-dev:arm64 (1.19+dfsg-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up libncurses5-dev:arm64 (6.4-2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.11.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.11.4) ... Processing triggers for libc-bin (2.36-9) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.31-1.2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/spew-1.0.8/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../spew_1.0.8-1.1_source.changes dpkg-buildpackage: info: source package spew dpkg-buildpackage: info: source version 1.0.8-1.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Marcos Talau dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp # Add here commands to clean up after the build process. [ ! -f Makefile ] || /usr/bin/make distclean rm -f config.log cp -f /usr/share/misc/config.sub config/config.sub cp -f /usr/share/misc/config.guess config/config.guess dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 7 in use) debian/rules build dh_testdir # Add here commands to configure the package. CFLAGS="-Wall -g -O2" ./configure --host=aarch64-linux-gnu --build=aarch64-linux-gnu --prefix=/usr --mandir=\${prefix}/share/man --sysconfdir=/etc checking whether to enable maintainer-specific portions of Makefiles... no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes /build/spew-1.0.8/config/missing: Unknown `--run' option Try `/build/spew-1.0.8/config/missing --help' for more information configure: WARNING: `missing' script is too old or missing checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for aarch64-linux-gnu-g++... aarch64-linux-gnu-g++ checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether aarch64-linux-gnu-g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of aarch64-linux-gnu-g++... gcc3 checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc checking whether we are using the GNU C compiler... yes checking whether aarch64-linux-gnu-gcc accepts -g... yes checking for aarch64-linux-gnu-gcc option to accept ISO C89... none needed checking dependency style of aarch64-linux-gnu-gcc... gcc3 checking whether make sets $(MAKE)... (cached) yes checking for aarch64-linux-gnu-ranlib... aarch64-linux-gnu-ranlib checking whether ln -s works... yes checking for poptGetContext in -lpopt... yes checking for wresize in -lncurses... yes checking how to run the C preprocessor... aarch64-linux-gnu-gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking paths.h usability... yes checking paths.h presence... yes checking for paths.h... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for an ANSI C-conforming const... yes checking for off_t... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether O_DIRECT is declared... yes checking whether TIOCGWINSZ is declared... yes checking whether WIOCGETD is declared... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking whether MNT_MNTTAB is declared... no checking whether _PATH_MOUNTED is declared... yes checking whether MNTTAB_PATH is declared... yes checking for getmntent... yes checking size of unsigned int... 4 checking size of unsigned long... 8 checking size of unsigned long long... 8 checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking return type of signal handlers... void checking for vprintf... yes checking for _doprnt... no checking for getpagesize... yes checking for gettimeofday... yes checking for memset... yes checking for strerror... yes checking for strsignal... yes checking for strrchr... yes checking for localtime_r... yes checking for basename... yes configure: creating ./config.status config.status: creating src/Makefile config.status: creating man/Makefile config.status: creating etc/Makefile config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands dh_testdir # Add here commands to compile the package. /usr/bin/make make[1]: Entering directory '/build/spew-1.0.8' /usr/bin/make all-recursive make[2]: Entering directory '/build/spew-1.0.8' Making all in src make[3]: Entering directory '/build/spew-1.0.8/src' aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT common.o -MD -MP -MF .deps/common.Tpo -c -o common.o common.cpp mv -f .deps/common.Tpo .deps/common.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT TimeHack.o -MD -MP -MF .deps/TimeHack.Tpo -c -o TimeHack.o TimeHack.cpp mv -f .deps/TimeHack.Tpo .deps/TimeHack.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT Job.o -MD -MP -MF .deps/Job.Tpo -c -o Job.o Job.cpp mv -f .deps/Job.Tpo .deps/Job.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT Log.o -MD -MP -MF .deps/Log.Tpo -c -o Log.o Log.cpp mv -f .deps/Log.Tpo .deps/Log.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT Random.o -MD -MP -MF .deps/Random.Tpo -c -o Random.o Random.cpp mv -f .deps/Random.Tpo .deps/Random.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT ReadJob.o -MD -MP -MF .deps/ReadJob.Tpo -c -o ReadJob.o ReadJob.cpp mv -f .deps/ReadJob.Tpo .deps/ReadJob.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT WriteJob.o -MD -MP -MF .deps/WriteJob.Tpo -c -o WriteJob.o WriteJob.cpp mv -f .deps/WriteJob.Tpo .deps/WriteJob.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT Transfer.o -MD -MP -MF .deps/Transfer.Tpo -c -o Transfer.o Transfer.cpp mv -f .deps/Transfer.Tpo .deps/Transfer.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT TransferFactory.o -MD -MP -MF .deps/TransferFactory.Tpo -c -o TransferFactory.o TransferFactory.cpp mv -f .deps/TransferFactory.Tpo .deps/TransferFactory.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT GarbageTransfer.o -MD -MP -MF .deps/GarbageTransfer.Tpo -c -o GarbageTransfer.o GarbageTransfer.cpp mv -f .deps/GarbageTransfer.Tpo .deps/GarbageTransfer.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT NumbersTransfer.o -MD -MP -MF .deps/NumbersTransfer.Tpo -c -o NumbersTransfer.o NumbersTransfer.cpp mv -f .deps/NumbersTransfer.Tpo .deps/NumbersTransfer.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT RandomTransfer.o -MD -MP -MF .deps/RandomTransfer.Tpo -c -o RandomTransfer.o RandomTransfer.cpp mv -f .deps/RandomTransfer.Tpo .deps/RandomTransfer.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT BytePatternTransfer.o -MD -MP -MF .deps/BytePatternTransfer.Tpo -c -o BytePatternTransfer.o BytePatternTransfer.cpp mv -f .deps/BytePatternTransfer.Tpo .deps/BytePatternTransfer.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT TransferInfo.o -MD -MP -MF .deps/TransferInfo.Tpo -c -o TransferInfo.o TransferInfo.cpp mv -f .deps/TransferInfo.Tpo .deps/TransferInfo.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT TransferInfoList.o -MD -MP -MF .deps/TransferInfoList.Tpo -c -o TransferInfoList.o TransferInfoList.cpp mv -f .deps/TransferInfoList.Tpo .deps/TransferInfoList.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT TransferInfoListFactory.o -MD -MP -MF .deps/TransferInfoListFactory.Tpo -c -o TransferInfoListFactory.o TransferInfoListFactory.cpp mv -f .deps/TransferInfoListFactory.Tpo .deps/TransferInfoListFactory.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT RandomTransferInfoList.o -MD -MP -MF .deps/RandomTransferInfoList.Tpo -c -o RandomTransferInfoList.o RandomTransferInfoList.cpp mv -f .deps/RandomTransferInfoList.Tpo .deps/RandomTransferInfoList.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT SequentialTransferInfoList.o -MD -MP -MF .deps/SequentialTransferInfoList.Tpo -c -o SequentialTransferInfoList.o SequentialTransferInfoList.cpp mv -f .deps/SequentialTransferInfoList.Tpo .deps/SequentialTransferInfoList.Po rm -f libcommon.a ar cru libcommon.a common.o TimeHack.o Job.o Log.o Random.o ReadJob.o WriteJob.o Transfer.o TransferFactory.o GarbageTransfer.o NumbersTransfer.o RandomTransfer.o BytePatternTransfer.o TransferInfo.o TransferInfoList.o TransferInfoListFactory.o RandomTransferInfoList.o SequentialTransferInfoList.o ar: `u' modifier ignored since `D' is the default (see `U') aarch64-linux-gnu-ranlib libcommon.a aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT Tui.o -MD -MP -MF .deps/Tui.Tpo -c -o Tui.o Tui.cpp mv -f .deps/Tui.Tpo .deps/Tui.Po rm -f libtui.a ar cru libtui.a Tui.o ar: `u' modifier ignored since `D' is the default (see `U') aarch64-linux-gnu-ranlib libtui.a aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT spew.o -MD -MP -MF .deps/spew.Tpo -c -o spew.o spew.cpp mv -f .deps/spew.Tpo .deps/spew.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT SpewDisplay.o -MD -MP -MF .deps/SpewDisplay.Tpo -c -o SpewDisplay.o SpewDisplay.cpp mv -f .deps/SpewDisplay.Tpo .deps/SpewDisplay.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT SpewConsole.o -MD -MP -MF .deps/SpewConsole.Tpo -c -o SpewConsole.o SpewConsole.cpp mv -f .deps/SpewConsole.Tpo .deps/SpewConsole.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT SpewTui.o -MD -MP -MF .deps/SpewTui.Tpo -c -o SpewTui.o SpewTui.cpp mv -f .deps/SpewTui.Tpo .deps/SpewTui.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT SpewTuiWindow.o -MD -MP -MF .deps/SpewTuiWindow.Tpo -c -o SpewTuiWindow.o SpewTuiWindow.cpp mv -f .deps/SpewTuiWindow.Tpo .deps/SpewTuiWindow.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT SpewTuiHelpWindow.o -MD -MP -MF .deps/SpewTuiHelpWindow.Tpo -c -o SpewTuiHelpWindow.o SpewTuiHelpWindow.cpp mv -f .deps/SpewTuiHelpWindow.Tpo .deps/SpewTuiHelpWindow.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT SpewTuiProgressWindow.o -MD -MP -MF .deps/SpewTuiProgressWindow.Tpo -c -o SpewTuiProgressWindow.o SpewTuiProgressWindow.cpp mv -f .deps/SpewTuiProgressWindow.Tpo .deps/SpewTuiProgressWindow.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT SpewTuiStatisticsWindow.o -MD -MP -MF .deps/SpewTuiStatisticsWindow.Tpo -c -o SpewTuiStatisticsWindow.o SpewTuiStatisticsWindow.cpp mv -f .deps/SpewTuiStatisticsWindow.Tpo .deps/SpewTuiStatisticsWindow.Po aarch64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -DSYSCONFDIR=/etc -MT SpewTuiStatusWindow.o -MD -MP -MF .deps/SpewTuiStatusWindow.Tpo -c -o SpewTuiStatusWindow.o SpewTuiStatusWindow.cpp mv -f .deps/SpewTuiStatusWindow.Tpo .deps/SpewTuiStatusWindow.Po aarch64-linux-gnu-g++ -g -O2 -DSYSCONFDIR=/etc -o spew spew.o SpewDisplay.o SpewConsole.o SpewTui.o SpewTuiWindow.o SpewTuiHelpWindow.o SpewTuiProgressWindow.o SpewTuiStatisticsWindow.o SpewTuiStatusWindow.o libcommon.a libtui.a -lncurses -lpopt make[3]: Leaving directory '/build/spew-1.0.8/src' Making all in man make[3]: Entering directory '/build/spew-1.0.8/man' sed -e 's!SPEW_VERSION!1.0.8!' \ -e 's!SYSCONFDIR!/etc!' spew.1.in >spew.1 /usr/bin/make all-am make[4]: Entering directory '/build/spew-1.0.8/man' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/spew-1.0.8/man' make[3]: Leaving directory '/build/spew-1.0.8/man' Making all in etc make[3]: Entering directory '/build/spew-1.0.8/etc' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/spew-1.0.8/etc' make[3]: Entering directory '/build/spew-1.0.8' make[3]: Leaving directory '/build/spew-1.0.8' make[2]: Leaving directory '/build/spew-1.0.8' make[1]: Leaving directory '/build/spew-1.0.8' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep dh_installdirs dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 7 in use) # Add here commands to install the package into debian/spew. /usr/bin/make install DESTDIR=/build/spew-1.0.8/debian/spew make[1]: Entering directory '/build/spew-1.0.8' Making install in src make[2]: Entering directory '/build/spew-1.0.8/src' make[3]: Entering directory '/build/spew-1.0.8/src' test -z "/usr/bin" || /usr/bin/mkdir -p "/build/spew-1.0.8/debian/spew/usr/bin" /usr/bin/install -c spew '/build/spew-1.0.8/debian/spew/usr/bin' (cd /build/spew-1.0.8/debian/spew/usr/bin && ln -s -f spew gorge) (cd /build/spew-1.0.8/debian/spew/usr/bin && ln -s -f spew regorge) make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/spew-1.0.8/src' make[2]: Leaving directory '/build/spew-1.0.8/src' Making install in man make[2]: Entering directory '/build/spew-1.0.8/man' /usr/bin/make install-am make[3]: Entering directory '/build/spew-1.0.8/man' make[4]: Entering directory '/build/spew-1.0.8/man' make[4]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/man/man1" || /usr/bin/mkdir -p "/build/spew-1.0.8/debian/spew/usr/share/man/man1" /usr/bin/install -c -m 644 spew.1 '/build/spew-1.0.8/debian/spew/usr/share/man/man1' (cd /build/spew-1.0.8/debian/spew/usr/share/man/man1 && ln -s -f spew.1 gorge.1) (cd /build/spew-1.0.8/debian/spew/usr/share/man/man1 && ln -s -f spew.1 regorge.1) make[4]: Leaving directory '/build/spew-1.0.8/man' make[3]: Leaving directory '/build/spew-1.0.8/man' make[2]: Leaving directory '/build/spew-1.0.8/man' Making install in etc make[2]: Entering directory '/build/spew-1.0.8/etc' make[3]: Entering directory '/build/spew-1.0.8/etc' test -z "/etc" || /usr/bin/mkdir -p "/build/spew-1.0.8/debian/spew/etc" /usr/bin/install -c -m 644 spew.conf '/build/spew-1.0.8/debian/spew/etc' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/spew-1.0.8/etc' make[2]: Leaving directory '/build/spew-1.0.8/etc' make[2]: Entering directory '/build/spew-1.0.8' make[3]: Entering directory '/build/spew-1.0.8' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/spew-1.0.8' make[2]: Leaving directory '/build/spew-1.0.8' make[1]: Leaving directory '/build/spew-1.0.8' dh_testdir dh_testroot # upstream ChangeLog is blank dh_installchangelogs -XChangeLog dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installexamples dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_installman dh_installman: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_link dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_fixperms dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 7 in use) dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'spew' in '../spew_1.0.8-1.1_arm64.deb'. dpkg-deb: building package 'spew-dbgsym' in '../spew-dbgsym_1.0.8-1.1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../spew_1.0.8-1.1_arm64.buildinfo dpkg-genchanges --build=binary -O../spew_1.0.8-1.1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/8904 and its subdirectories I: Current time: Wed May 3 01:56:54 -12 2023 I: pbuilder-time-stamp: 1683122214 Wed May 3 13:56:56 UTC 2023 I: 1st build successful. Starting 2nd build on remote node codethink15-arm64.debian.net. Wed May 3 13:56:56 UTC 2023 I: Preparing to do remote build '2' on codethink15-arm64.debian.net. Wed May 3 13:58:13 UTC 2023 I: Deleting $TMPDIR on codethink15-arm64.debian.net. Wed May 3 13:58:14 UTC 2023 I: spew_1.0.8-1.1_arm64.changes: Format: 1.8 Date: Sun, 06 Nov 2022 13:31:22 -0300 Source: spew Binary: spew spew-dbgsym Architecture: arm64 Version: 1.0.8-1.1 Distribution: unstable Urgency: medium Maintainer: Matt Taggart Changed-By: Marcos Talau Description: spew - I/O performance measurement and load generation tool Closes: 998965 Changes: spew (1.0.8-1.1) unstable; urgency=medium . * Non-maintainer upload. * debian/rules: Add build-{arch,indep} (Closes: #998965). Checksums-Sha1: 738bd192cf41520505d419b414bc3aafe27d9510 481096 spew-dbgsym_1.0.8-1.1_arm64.deb 94a5e36ac218dfafed72350bb2c5494422458d85 5260 spew_1.0.8-1.1_arm64.buildinfo 97011f39792ec0aafd6d2ab64ff24bc4ca7a09a2 45092 spew_1.0.8-1.1_arm64.deb Checksums-Sha256: 268b38e03f81d099f45a6ed31e8f31ba22837ae6ceaf73d02c2e0896994a1920 481096 spew-dbgsym_1.0.8-1.1_arm64.deb 41a3c04d062871714f32b05a24f2fdf174fc284a6fedd735424ac6952c27513d 5260 spew_1.0.8-1.1_arm64.buildinfo 4492cb72040dd74c21e3758c59dbf063434717a88e934f6c1f040271331eb0dd 45092 spew_1.0.8-1.1_arm64.deb Files: 687e4be6fe07370677cbd27ef3f323e2 481096 debug optional spew-dbgsym_1.0.8-1.1_arm64.deb 1b030a370370865f4a4762156fb27670 5260 utils extra spew_1.0.8-1.1_arm64.buildinfo 5ab51329c829dfeb1071a533be1c001e 45092 utils extra spew_1.0.8-1.1_arm64.deb Wed May 3 13:58:14 UTC 2023 I: diffoscope 241 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.RusYTqqT/spew_1.0.8-1.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.RusYTqqT/spew_1.0.8-1.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.RusYTqqT/spew_1.0.8-1.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.RusYTqqT/b1/spew_1.0.8-1.1_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.RusYTqqT/b2/spew_1.0.8-1.1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.305s) 0.304s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.019s) 0.019s 12 calls diffoscope.comparators.binary.FilesystemFile 0.000s 10 calls abc.DotChangesFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Wed May 3 13:58:16 UTC 2023 I: diffoscope 241 found no differences in the changes files, and a .buildinfo file also exists. Wed May 3 13:58:16 UTC 2023 I: spew from bookworm built successfully and reproducibly on arm64. Wed May 3 13:58:17 UTC 2023 I: Submitting .buildinfo files to external archives: Wed May 3 13:58:17 UTC 2023 I: Submitting 8.0K b1/spew_1.0.8-1.1_arm64.buildinfo.asc Wed May 3 13:58:18 UTC 2023 I: Submitting 8.0K b2/spew_1.0.8-1.1_arm64.buildinfo.asc Wed May 3 13:58:19 UTC 2023 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed May 3 13:58:19 UTC 2023 I: Done submitting .buildinfo files. Wed May 3 13:58:19 UTC 2023 I: Removing signed spew_1.0.8-1.1_arm64.buildinfo.asc files: removed './b1/spew_1.0.8-1.1_arm64.buildinfo.asc' removed './b2/spew_1.0.8-1.1_arm64.buildinfo.asc'