Wed May 10 08:29:55 UTC 2023 I: starting to build solid-pop3d/bookworm/amd64 on jenkins on '2023-05-10 08:29' Wed May 10 08:29:55 UTC 2023 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_30/14942/console.log Wed May 10 08:29:55 UTC 2023 I: Downloading source for bookworm/solid-pop3d=0.15-31 --2023-05-10 08:29:55-- http://cdn-fastly.deb.debian.org/debian/pool/main/s/solid-pop3d/solid-pop3d_0.15-31.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1842 (1.8K) [text/prs.lines.tag] Saving to: ‘solid-pop3d_0.15-31.dsc’ 0K . 100% 146M=0s 2023-05-10 08:29:55 (146 MB/s) - ‘solid-pop3d_0.15-31.dsc’ saved [1842/1842] Wed May 10 08:29:55 UTC 2023 I: solid-pop3d_0.15-31.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: solid-pop3d Binary: solid-pop3d Architecture: any Version: 0.15-31 Maintainer: Robert Luberda Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/debian/solid-pop3d/ Vcs-Git: https://salsa.debian.org/debian/solid-pop3d.git Build-Depends: debhelper-compat (= 13), liblockfile-dev, libpam0g-dev Package-List: solid-pop3d deb mail optional arch=any Checksums-Sha1: 77534072dc352700acf23d29c781659833e53a04 102927 solid-pop3d_0.15.orig.tar.gz 11ee16da128d3cc0c8e551b3d03471441ad35691 29248 solid-pop3d_0.15-31.debian.tar.xz Checksums-Sha256: 0d666da31d0971de00dad79e7f2ad3ecfc857e01e00b8cf8c9cc3bd1f4be25f8 102927 solid-pop3d_0.15.orig.tar.gz 11d41fab867c05ce8790093a66c77cf2640e7b1440248fae85386dd90f5fe4c0 29248 solid-pop3d_0.15-31.debian.tar.xz Files: 1b893fcfdceef7d3c209094e34023c02 102927 solid-pop3d_0.15.orig.tar.gz e630d474d675e02172832fad3c954bc2 29248 solid-pop3d_0.15-31.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEENeh2+rTTcy6TtNI3Yx3nVTvor9QFAmAEaz0ACgkQYx3nVTvo r9QJMQ//UiYUieMQQWyq6gL4ManWKEth57ZrXNlx2eMO+c0fMveH3OszeZb9OYhW buX+vCnxOUjdQY6TaETVgOerZmo9vvZIhOWfsIGfI1DARaqrxQCuAT6Nlpn/EOFJ iUvGB2qfmfFvexflZp2KxTmHo/7HaJO8UAwKxf7AkdTPzxzGIes5uH45Eoj+JZ4O /2J1D/HvjVLaVylOBBgmKkiUKEn1Bg5r467wcs4cR76YxU55ZAKVgijcaaEJDfaP 6xN5BHuWTnjRw3m32Sq/SuqDMtFW5KK2KBpVcqg3Dw52y04RCqlolV7LgZUd2LQ9 phlYr+EML3iUy99I35MMbdM4Hc5z/LQ734qB45uCNGdq/E4tPAQj9rrL0f7DA4nG o0/iwRssUgLYMwfbU3Iuw/2uzADEfr6RH/Qngro8vAlrvi1S3X+CeBQ/P/i7fRWh bRV5ZVem6gYuGeunXPBz4EsA9T1HWnAT55M4wr0G8KNzsMPRNlxSuxzmqL+Q5/tm jcf6H62akYNKj+o/t2y+9WAbYA1RBL3fTkWfX4UViQM9l1/s8wN/JqEcPxWZSsED Y1cg2meoPAF87/van4a3KZKHwIP3O00RB9sa+Ify/cErzXoi8ZvVE0wLlTqxsGXk OHG9mqm/AxZaK7i1U7N/NqU6qEeTsHMZrZCiQvEGsS/ugv2hYZ8= =p6LZ -----END PGP SIGNATURE----- Wed May 10 08:29:55 UTC 2023 I: Checking whether the package is not for us Wed May 10 08:29:55 UTC 2023 I: Starting 1st build on remote node ionos5-amd64.debian.net. Wed May 10 08:29:55 UTC 2023 I: Preparing to do remote build '1' on ionos5-amd64.debian.net. Wed May 10 08:33:33 UTC 2023 I: Deleting $TMPDIR on ionos5-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Jun 11 02:53:03 -12 2024 I: pbuilder-time-stamp: 1718117583 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [solid-pop3d_0.15-31.dsc] I: copying [./solid-pop3d_0.15.orig.tar.gz] I: copying [./solid-pop3d_0.15-31.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Jan 17 04:52:13 2021 -12 gpgv: using RSA key 35E876FAB4D3732E93B4D237631DE7553BE8AFD4 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./solid-pop3d_0.15-31.dsc: no acceptable signature found dpkg-source: info: extracting solid-pop3d in solid-pop3d-0.15 dpkg-source: info: unpacking solid-pop3d_0.15.orig.tar.gz dpkg-source: info: unpacking solid-pop3d_0.15-31.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 02-configure.patch dpkg-source: info: applying 03-debian-base.patch dpkg-source: info: applying 04-liblockfile.patch dpkg-source: info: applying 05-unlock.patch dpkg-source: info: applying 06-autologout-username.patch dpkg-source: info: applying 07-allowuser.patch dpkg-source: info: applying 08-init.patch dpkg-source: info: applying 09-authmappeduser.patch dpkg-source: info: applying 10-usermapprefix.patch dpkg-source: info: applying 11-parserloop.patch dpkg-source: info: applying 12-multiple-mailbox.patch dpkg-source: info: applying 13-max-sessions.patch dpkg-source: info: applying 14-gcc-4.0-amd64.patch dpkg-source: info: applying 15-gcc-warning.patch dpkg-source: info: applying 16-manpages-hyphens.patch dpkg-source: info: applying 17-close-fds.patch dpkg-source: info: applying 18-init-fix.patch dpkg-source: info: applying 19-gcc-warnings.patch dpkg-source: info: applying 20-spelling-typo.patch dpkg-source: info: applying 21-remove-rcsid.patch dpkg-source: info: applying 22-add-Makefile.am-files.patch dpkg-source: info: applying 23-gcc8-warnings.patch dpkg-source: info: applying 24-fix-ipv6-crash.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/881161/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=16' DISTRIBUTION='bookworm' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='092a3d99cdc54f0a826f4086b4119590' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='881161' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.cMaQ5I9b/pbuilderrc_S7HP --distribution bookworm --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.cMaQ5I9b/b1 --logfile b1/build.log solid-pop3d_0.15-31.dsc' SUDO_GID='110' SUDO_UID='105' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://85.184.249.68:3128' I: uname -a Linux ionos5-amd64 6.1.0-0.deb11.6-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.15-1~bpo11+1 (2023-03-16) x86_64 GNU/Linux I: ls -l /bin total 5632 -rwxr-xr-x 1 root root 1265648 Apr 23 2023 bash -rwxr-xr-x 3 root root 39224 Sep 18 2022 bunzip2 -rwxr-xr-x 3 root root 39224 Sep 18 2022 bzcat lrwxrwxrwx 1 root root 6 Sep 18 2022 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Sep 18 2022 bzdiff lrwxrwxrwx 1 root root 6 Sep 18 2022 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4893 Nov 27 2021 bzexe lrwxrwxrwx 1 root root 6 Sep 18 2022 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Sep 18 2022 bzgrep -rwxr-xr-x 3 root root 39224 Sep 18 2022 bzip2 -rwxr-xr-x 1 root root 14568 Sep 18 2022 bzip2recover lrwxrwxrwx 1 root root 6 Sep 18 2022 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Sep 18 2022 bzmore -rwxr-xr-x 1 root root 44016 Sep 20 2022 cat -rwxr-xr-x 1 root root 68656 Sep 20 2022 chgrp -rwxr-xr-x 1 root root 64496 Sep 20 2022 chmod -rwxr-xr-x 1 root root 72752 Sep 20 2022 chown -rwxr-xr-x 1 root root 151152 Sep 20 2022 cp -rwxr-xr-x 1 root root 125640 Jan 5 2023 dash -rwxr-xr-x 1 root root 121904 Sep 20 2022 date -rwxr-xr-x 1 root root 89240 Sep 20 2022 dd -rwxr-xr-x 1 root root 102200 Sep 20 2022 df -rwxr-xr-x 1 root root 151344 Sep 20 2022 dir -rwxr-xr-x 1 root root 88656 Mar 22 2023 dmesg lrwxrwxrwx 1 root root 8 Dec 19 2022 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Dec 19 2022 domainname -> hostname -rwxr-xr-x 1 root root 43856 Sep 20 2022 echo -rwxr-xr-x 1 root root 41 Jan 24 2023 egrep -rwxr-xr-x 1 root root 35664 Sep 20 2022 false -rwxr-xr-x 1 root root 41 Jan 24 2023 fgrep -rwxr-xr-x 1 root root 85600 Mar 22 2023 findmnt -rwsr-xr-x 1 root root 35128 Mar 22 2023 fusermount -rwxr-xr-x 1 root root 203152 Jan 24 2023 grep -rwxr-xr-x 2 root root 2346 Apr 9 2022 gunzip -rwxr-xr-x 1 root root 6447 Apr 9 2022 gzexe -rwxr-xr-x 1 root root 98136 Apr 9 2022 gzip -rwxr-xr-x 1 root root 22680 Dec 19 2022 hostname -rwxr-xr-x 1 root root 72824 Sep 20 2022 ln -rwxr-xr-x 1 root root 53024 Mar 23 2023 login -rwxr-xr-x 1 root root 151344 Sep 20 2022 ls -rwxr-xr-x 1 root root 207168 Mar 22 2023 lsblk -rwxr-xr-x 1 root root 97552 Sep 20 2022 mkdir -rwxr-xr-x 1 root root 72912 Sep 20 2022 mknod -rwxr-xr-x 1 root root 43952 Sep 20 2022 mktemp -rwxr-xr-x 1 root root 59712 Mar 22 2023 more -rwsr-xr-x 1 root root 59704 Mar 22 2023 mount -rwxr-xr-x 1 root root 18744 Mar 22 2023 mountpoint -rwxr-xr-x 1 root root 142968 Sep 20 2022 mv lrwxrwxrwx 1 root root 8 Dec 19 2022 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 2 2023 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 43952 Sep 20 2022 pwd lrwxrwxrwx 1 root root 4 Apr 23 2023 rbash -> bash -rwxr-xr-x 1 root root 52112 Sep 20 2022 readlink -rwxr-xr-x 1 root root 72752 Sep 20 2022 rm -rwxr-xr-x 1 root root 56240 Sep 20 2022 rmdir -rwxr-xr-x 1 root root 27560 Nov 2 2022 run-parts -rwxr-xr-x 1 root root 126424 Jan 5 2023 sed lrwxrwxrwx 1 root root 4 Jan 5 2023 sh -> dash -rwxr-xr-x 1 root root 43888 Sep 20 2022 sleep -rwxr-xr-x 1 root root 85008 Sep 20 2022 stty -rwsr-xr-x 1 root root 72000 Mar 22 2023 su -rwxr-xr-x 1 root root 39824 Sep 20 2022 sync -rwxr-xr-x 1 root root 531984 Apr 6 2023 tar -rwxr-xr-x 1 root root 14520 Nov 2 2022 tempfile -rwxr-xr-x 1 root root 109616 Sep 20 2022 touch -rwxr-xr-x 1 root root 35664 Sep 20 2022 true -rwxr-xr-x 1 root root 14568 Mar 22 2023 ulockmgr_server -rwsr-xr-x 1 root root 35128 Mar 22 2023 umount -rwxr-xr-x 1 root root 43888 Sep 20 2022 uname -rwxr-xr-x 2 root root 2346 Apr 9 2022 uncompress -rwxr-xr-x 1 root root 151344 Sep 20 2022 vdir -rwxr-xr-x 1 root root 72024 Mar 22 2023 wdctl lrwxrwxrwx 1 root root 8 Dec 19 2022 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Apr 9 2022 zcat -rwxr-xr-x 1 root root 1678 Apr 9 2022 zcmp -rwxr-xr-x 1 root root 6460 Apr 9 2022 zdiff -rwxr-xr-x 1 root root 29 Apr 9 2022 zegrep -rwxr-xr-x 1 root root 29 Apr 9 2022 zfgrep -rwxr-xr-x 1 root root 2081 Apr 9 2022 zforce -rwxr-xr-x 1 root root 8103 Apr 9 2022 zgrep -rwxr-xr-x 1 root root 2206 Apr 9 2022 zless -rwxr-xr-x 1 root root 1842 Apr 9 2022 zmore -rwxr-xr-x 1 root root 4577 Apr 9 2022 znew I: user script /srv/workspace/pbuilder/881161/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), liblockfile-dev, libpam0g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19596 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on liblockfile-dev; however: Package liblockfile-dev is not installed. pbuilder-satisfydepends-dummy depends on libpam0g-dev; however: Package libpam0g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} liblockfile-bin{a} liblockfile-dev{a} liblockfile1{a} libmagic-mgc{a} libmagic1{a} libpam0g-dev{a} libpipeline1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 18.9 MB of archives. After unpacking 73.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bookworm/main amd64 sensible-utils all 0.0.17+nmu1 [19.0 kB] Get: 2 http://deb.debian.org/debian bookworm/main amd64 libmagic-mgc amd64 1:5.44-3 [305 kB] Get: 3 http://deb.debian.org/debian bookworm/main amd64 libmagic1 amd64 1:5.44-3 [104 kB] Get: 4 http://deb.debian.org/debian bookworm/main amd64 file amd64 1:5.44-3 [42.5 kB] Get: 5 http://deb.debian.org/debian bookworm/main amd64 gettext-base amd64 0.21-12 [160 kB] Get: 6 http://deb.debian.org/debian bookworm/main amd64 libuchardet0 amd64 0.0.7-1 [67.8 kB] Get: 7 http://deb.debian.org/debian bookworm/main amd64 groff-base amd64 1.22.4-10 [916 kB] Get: 8 http://deb.debian.org/debian bookworm/main amd64 liblockfile-bin amd64 1.17-1+b1 [20.8 kB] Get: 9 http://deb.debian.org/debian bookworm/main amd64 bsdextrautils amd64 2.38.1-5+b1 [86.6 kB] Get: 10 http://deb.debian.org/debian bookworm/main amd64 libpipeline1 amd64 1.5.7-1 [38.5 kB] Get: 11 http://deb.debian.org/debian bookworm/main amd64 man-db amd64 2.11.2-2 [1386 kB] Get: 12 http://deb.debian.org/debian bookworm/main amd64 m4 amd64 1.4.19-3 [287 kB] Get: 13 http://deb.debian.org/debian bookworm/main amd64 autoconf all 2.71-3 [332 kB] Get: 14 http://deb.debian.org/debian bookworm/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 15 http://deb.debian.org/debian bookworm/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 16 http://deb.debian.org/debian bookworm/main amd64 autopoint all 0.21-12 [495 kB] Get: 17 http://deb.debian.org/debian bookworm/main amd64 libdebhelper-perl all 13.11.4 [81.2 kB] Get: 18 http://deb.debian.org/debian bookworm/main amd64 libtool all 2.4.7-5 [517 kB] Get: 19 http://deb.debian.org/debian bookworm/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bookworm/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bookworm/main amd64 libsub-override-perl all 0.09-4 [9304 B] Get: 22 http://deb.debian.org/debian bookworm/main amd64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 23 http://deb.debian.org/debian bookworm/main amd64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 24 http://deb.debian.org/debian bookworm/main amd64 libelf1 amd64 0.188-2.1 [174 kB] Get: 25 http://deb.debian.org/debian bookworm/main amd64 dwz amd64 0.15-1 [109 kB] Get: 26 http://deb.debian.org/debian bookworm/main amd64 libicu72 amd64 72.1-3 [9376 kB] Get: 27 http://deb.debian.org/debian bookworm/main amd64 libxml2 amd64 2.9.14+dfsg-1.2 [687 kB] Get: 28 http://deb.debian.org/debian bookworm/main amd64 gettext amd64 0.21-12 [1300 kB] Get: 29 http://deb.debian.org/debian bookworm/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 30 http://deb.debian.org/debian bookworm/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bookworm/main amd64 debhelper all 13.11.4 [942 kB] Get: 32 http://deb.debian.org/debian bookworm/main amd64 liblockfile1 amd64 1.17-1+b1 [17.0 kB] Get: 33 http://deb.debian.org/debian bookworm/main amd64 liblockfile-dev amd64 1.17-1+b1 [21.6 kB] Get: 34 http://deb.debian.org/debian bookworm/main amd64 libpam0g-dev amd64 1.5.2-6 [148 kB] Fetched 18.9 MB in 1s (17.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19596 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_amd64.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../02-libmagic1_1%3a5.44-3_amd64.deb ... Unpacking libmagic1:amd64 (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.44-3_amd64.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-12_amd64.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.7-1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.22.4-10_amd64.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package liblockfile-bin. Preparing to unpack .../07-liblockfile-bin_1.17-1+b1_amd64.deb ... Unpacking liblockfile-bin (1.17-1+b1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.38.1-5+b1_amd64.deb ... Unpacking bsdextrautils (2.38.1-5+b1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../09-libpipeline1_1.5.7-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.11.2-2_amd64.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-3_amd64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../23-libelf1_0.188-2.1_amd64.deb ... Unpacking libelf1:amd64 (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.15-1_amd64.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../25-libicu72_72.1-3_amd64.deb ... Unpacking libicu72:amd64 (72.1-3) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../26-libxml2_2.9.14+dfsg-1.2_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.2) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-12_amd64.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package liblockfile1:amd64. Preparing to unpack .../31-liblockfile1_1.17-1+b1_amd64.deb ... Unpacking liblockfile1:amd64 (1.17-1+b1) ... Selecting previously unselected package liblockfile-dev:amd64. Preparing to unpack .../32-liblockfile-dev_1.17-1+b1_amd64.deb ... Unpacking liblockfile-dev:amd64 (1.17-1+b1) ... Selecting previously unselected package libpam0g-dev:amd64. Preparing to unpack .../33-libpam0g-dev_1.5.2-6_amd64.deb ... Unpacking libpam0g-dev:amd64 (1.5.2-6) ... Setting up libpipeline1:amd64 (1.5.7-1) ... Setting up libicu72:amd64 (72.1-3) ... Setting up liblockfile-bin (1.17-1+b1) ... Setting up bsdextrautils (2.38.1-5+b1) ... Setting up libpam0g-dev:amd64 (1.5.2-6) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libmagic1:amd64 (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-12) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:amd64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-4) ... Setting up liblockfile1:amd64 (1.17-1+b1) ... Setting up liblockfile-dev:amd64 (1.17-1+b1) ... Setting up libelf1:amd64 (0.188-2.1) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.11.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.11.4) ... Processing triggers for libc-bin (2.36-9) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/solid-pop3d-0.15/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../solid-pop3d_0.15-31_source.changes dpkg-buildpackage: info: source package solid-pop3d dpkg-buildpackage: info: source version 0.15-31 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Robert Luberda dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh "clean" debian/rules override_dh_auto_clean make[1]: Entering directory '/build/solid-pop3d-0.15' dh_auto_clean -v -Sautoconf -BDEB-BUILD --parallel make[1]: Leaving directory '/build/solid-pop3d-0.15' dh_clean debian/rules binary dh "binary" dh_update_autotools_config dh_autoreconf autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:6: warning: The macro `AC_CONFIG_HEADER' is obsolete. configure.in:6: You should run autoupdate. ./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from... configure.in:6: the top level configure.in:84: warning: The macro `AC_HEADER_STDC' is obsolete. configure.in:84: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.in:84: the top level configure.in:85: warning: The macro `AC_HEADER_TIME' is obsolete. configure.in:85: You should run autoupdate. ./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from... configure.in:85: the top level configure.in:98: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.in:98: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... configure.in:98: the top level configure.in:108: warning: The macro `AC_TYPE_SIGNAL' is obsolete. configure.in:108: You should run autoupdate. ./lib/autoconf/types.m4:776: AC_TYPE_SIGNAL is expanded from... configure.in:108: the top level configure.in:438: warning: AC_OUTPUT should be used without arguments. configure.in:438: You should run autoupdate. autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' autoheader: warning: WARNING: Using auxiliary files such as 'acconfig.h', 'config.h.bot' autoheader: WARNING: and 'config.h.top', to define templates for 'config.h.in' autoheader: WARNING: is deprecated and discouraged. autoheader: autoheader: WARNING: Using the third argument of 'AC_DEFINE_UNQUOTED' and autoheader: WARNING: 'AC_DEFINE' allows one to define a template without autoheader: WARNING: 'acconfig.h': autoheader: autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1, autoheader: [Define if a function 'main' is needed.]) autoheader: autoheader: WARNING: More sophisticated templates can also be produced, see the autoheader: WARNING: documentation. automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:10: installing './compile' src/Makefile.am: installing './depcomp' automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/solid-pop3d-0.15' CFLAGS="-g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall" LDFLAGS="-Wl,-z,relro -Wl,-z,now -Wl,-z,defs" \ dh_auto_configure -v -Sautoconf -BDEB-BUILD --parallel -- \ --localstatedir=/var/lib/solid-pop3d \ --program-transform-name="s/^spop3d$/solid-pop3d/" \ --enable-pam \ --enable-apop \ --enable-mailbox \ --enable-maildir \ --enable-configfile \ --enable-expire \ --enable-userconfig \ --enable-bulletins \ --enable-last \ --enable-mapping \ --enable-nonip \ --enable-createmail \ --enable-ipv6 \ --enable-resolve \ --enable-connect \ --enable-logextend \ --enable-statistics \ --enable-standalone \ # --enable-allowroot cd DEB-BUILD && ../configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --localstatedir=/var/lib/solid-pop3d --program-transform-name=s/^spop3d\$/solid-pop3d/ --enable-pam --enable-apop --enable-mailbox --enable-maildir --enable-configfile --enable-expire --enable-userconfig --enable-bulletins --enable-last --enable-mapping --enable-nonip --enable-createmail --enable-ipv6 --enable-resolve --enable-connect --enable-logextend --enable-statistics --enable-standalone checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for getspnam... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for sys/time.h... yes checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking whether byte ordering is bigendian... no checking for strchr... yes checking for memcpy... yes checking for setgroups... yes checking for flock... yes checking for fcntl.h... yes checking for limits.h... yes checking for sys/file.h... yes checking for syslog.h... yes checking for unistd.h... (cached) yes checking for shadow.h... yes checking for grp.h... yes checking for sys/time.h... (cached) yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking for off_t... yes checking how to run the C preprocessor... gcc -E checking for uid_t in sys/types.h... yes checking for pid_t... yes checking for ssize_t... yes checking for socklen_t... yes checking return type of signal handlers... void checking for vsnprintf... yes checking for snprintf... yes checking for gethostname... yes checking for mkdir... yes checking for rmdir... yes checking for utime... yes checking for strdup... yes checking for strerror... yes checking for strtol... yes checking for setsockopt... yes checking for authenticate... no checking for inet_aton... yes checking for t_accept in -lnsl... no checking for socket in -lsocket... no checking for maillock in -lmail... no checking for maillock in -llockfile... yes checking for crypt... no checking for crypt in -lcrypt... yes checking for getpwnam... yes checking whether to use PAM... yes checking whether to support APOP... yes checking whether to support mailbox... yes checking whether to support maildir... yes checking whether to support configuration file... yes checking whether to support message expiration... yes checking whether to support user configuration... yes checking whether to support bulletins... yes checking whether to build standalone version... yes checking whether to add support for LAST command... yes checking whether to add support for user names mapping... yes checking whether to add support for non-IP based virtual hosting... yes checking whether to add support for AllowRootLogin option... no checking whether to add support for CreateMailDrop option... yes checking whether to add support for IPv6 protocol... yes checking whether to log resolved host name... yes checking whether to log "connect from x" message... yes checking whether to add extended logging... yes checking whether to add support for statistics... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating man/Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands make[1]: Leaving directory '/build/solid-pop3d-0.15' debian/rules override_dh_auto_build make[1]: Entering directory '/build/solid-pop3d-0.15' dh_auto_build -v -Sautoconf -BDEB-BUILD --parallel cd DEB-BUILD && make -j16 make[2]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD' make all-recursive make[3]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD' Making all in doc make[4]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD/doc' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD/doc' Making all in man make[4]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD/man' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD/man' Making all in src make[4]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD/src' gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o pop_auth.o ../../src/pop_auth.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o fdfgets.o ../../src/fdfgets.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o vsnprintf.o ../../src/vsnprintf.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o authenticate.o ../../src/authenticate.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o cmds.o ../../src/cmds.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o log.o ../../src/log.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o maildrop.o ../../src/maildrop.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o main.o ../../src/main.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o md5.o ../../src/md5.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o memops.o ../../src/memops.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o options.o ../../src/options.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o response.o ../../src/response.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o apop.o ../../src/apop.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o mailbox.o ../../src/mailbox.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o maildir.o ../../src/maildir.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o userconfig.o ../../src/userconfig.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o configfile.o ../../src/configfile.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o standalone.o ../../src/standalone.c gcc -DHAVE_CONFIG_H -DDEFCONFIGFILENAME=\"/etc/spop3d.conf\" -DBULLDIR=\"/var/lib/solid-pop3d/bulletins/\" -I. -I../../src -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -c -o mapping.o ../../src/mapping.c gcc -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -o pop_auth pop_auth.o fdfgets.o vsnprintf.o ../../src/main.c: In function 'do_session': ../../src/main.c:1245:41: warning: '__builtin_strncpy' specified bound 41 equals destination size [-Wstringop-truncation] 1245 | strncpy (usersuffix, suffix + 1, sizeof(usersuffix)); | ^ ../../src/main.c:1255:41: warning: '__builtin___strncat_chk' output may be truncated copying between 0 and 40 bytes from a string of length 40 [-Wstringop-truncation] 1255 | strncat(usernamebuf, username, MAXARGLN - strlen(usernamebuf)); | ^ ../../src/main.c:1394:41: warning: '__builtin_strncpy' specified bound 41 equals destination size [-Wstringop-truncation] 1394 | strncpy (usersuffix, suffix + 1, sizeof(usersuffix)); | ^ ../../src/main.c:1404:41: warning: '__builtin___strncat_chk' output may be truncated copying between 0 and 40 bytes from a string of length 40 [-Wstringop-truncation] 1404 | strncat(usernamebuf, username, MAXARGLN - strlen(usernamebuf)); | ^ gcc -g -O2 -ffile-prefix-map=/build/solid-pop3d-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DDEBIAN -Wall -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -o spop3d authenticate.o cmds.o log.o fdfgets.o maildrop.o main.o md5.o memops.o options.o response.o vsnprintf.o apop.o mailbox.o maildir.o userconfig.o configfile.o standalone.o mapping.o -llockfile -lcrypt -lpam -ldl make[4]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD/src' make[4]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD' make[4]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD' make[3]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD' make[2]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD' make[1]: Leaving directory '/build/solid-pop3d-0.15' create-stamp debian/debhelper-build-stamp dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory '/build/solid-pop3d-0.15' dh_auto_install -v -Sautoconf -BDEB-BUILD --parallel --destdir="/build/solid-pop3d-0.15/debian/solid-pop3d" install -m0755 -d /build/solid-pop3d-0.15/debian/solid-pop3d cd DEB-BUILD && make -j16 install DESTDIR=/build/solid-pop3d-0.15/debian/solid-pop3d AM_UPDATE_INFO_DIR=no make[2]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD' Making install in doc make[3]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD/doc' make[4]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD/doc' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD/doc' make[3]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD/doc' Making install in man make[3]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD/man' make[4]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD/man' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/share/man/man1' /bin/mkdir -p '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/share/man/man5' /bin/mkdir -p '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/share/man/man8' /usr/bin/install -c -m 644 ../../man/pop_auth.1 '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/share/man/man1' /usr/bin/install -c -m 644 '../../man/spop3d.8' '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/share/man/man8/solid-pop3d.8' /usr/bin/install -c -m 644 ../../man/spop3d.conf.5 ../../man/dot-spop3d.5 '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/share/man/man5' make[4]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD/man' make[3]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD/man' Making install in src make[3]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD/src' make[4]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD/src' /bin/mkdir -p '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/bin' /bin/mkdir -p '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/sbin' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/install -c pop_auth '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/bin' /usr/bin/install -c spop3d '/build/solid-pop3d-0.15/debian/solid-pop3d/usr/sbin/./solid-pop3d' make[4]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD/src' make[3]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD/src' make[3]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD' make[4]: Entering directory '/build/solid-pop3d-0.15/DEB-BUILD' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD' make[3]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD' make[2]: Leaving directory '/build/solid-pop3d-0.15/DEB-BUILD' dh_install debian/spop3d.conf etc sh debian/fix_manpages.sh /build/solid-pop3d-0.15/debian/solid-pop3d make[1]: Leaving directory '/build/solid-pop3d-0.15' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_installdebconf dh_installinit dh_installpam dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dpkg-gencontrol: warning: Depends field of package solid-pop3d: substitution variable ${perl:Depends} used, but is not defined dpkg-gencontrol: warning: Depends field of package solid-pop3d: substitution variable ${perl:Depends} used, but is not defined dh_md5sums dh_builddeb dpkg-deb: building package 'solid-pop3d-dbgsym' in '../solid-pop3d-dbgsym_0.15-31_amd64.deb'. dpkg-deb: building package 'solid-pop3d' in '../solid-pop3d_0.15-31_amd64.deb'. dpkg-genbuildinfo --build=binary -O../solid-pop3d_0.15-31_amd64.buildinfo dpkg-genchanges --build=binary -O../solid-pop3d_0.15-31_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/881161 and its subdirectories I: Current time: Tue Jun 11 02:56:37 -12 2024 I: pbuilder-time-stamp: 1718117797 Wed May 10 08:33:33 UTC 2023 I: 1st build successful. Starting 2nd build on remote node ionos11-amd64.debian.net. Wed May 10 08:33:33 UTC 2023 I: Preparing to do remote build '2' on ionos11-amd64.debian.net. Wed May 10 08:34:14 UTC 2023 I: Deleting $TMPDIR on ionos11-amd64.debian.net. Wed May 10 08:34:14 UTC 2023 I: solid-pop3d_0.15-31_amd64.changes: Format: 1.8 Date: Sun, 17 Jan 2021 17:50:47 +0100 Source: solid-pop3d Binary: solid-pop3d solid-pop3d-dbgsym Architecture: amd64 Version: 0.15-31 Distribution: unstable Urgency: medium Maintainer: Robert Luberda Changed-By: Robert Luberda Description: solid-pop3d - POP3 server supporting Maildir, PAM, vhosting Closes: 974956 Changes: solid-pop3d (0.15-31) unstable; urgency=medium . [ Debian Janitor ] * Set debhelper-compat version in Build-Depends. . [ Robert Luberda ] * Add 24-fix-ipv6-crash.patch to fix a segmentation fault when client connects via IPv6 protocol (closes: #974956). * Bump debhelper compat level to 13. * Modernize hardening flags handling in debian/rules. * Recode debian/po/*.po files from national encodings to UTF-8 (lintian). * debian/control: + set Rules-Requires-Root: no; + Standards-Version: 4.5.1. Checksums-Sha1: 639e5f6361e5b6ff0a869a3726a9787a6dddef3f 96588 solid-pop3d-dbgsym_0.15-31_amd64.deb 466fb194b1087c38866898b343bbcd1adbd5df69 5267 solid-pop3d_0.15-31_amd64.buildinfo 7e2e877504442b83bc632e3435365b749b29830e 57952 solid-pop3d_0.15-31_amd64.deb Checksums-Sha256: fd91ae0db7fef7617fa3e0cba7f1b4aa40e411e3b1a856212a64fa0736c6fba2 96588 solid-pop3d-dbgsym_0.15-31_amd64.deb 9263fde9cb2e7f2d8f5a8b9d23a584399288b0a945e007df55d1ffb4591d0323 5267 solid-pop3d_0.15-31_amd64.buildinfo 62bed89378dffce5ff1b7d9992c0b1249823ed43c211d502fb43d7171940ea38 57952 solid-pop3d_0.15-31_amd64.deb Files: 05fc333b9f32e24aabab42c23c72745d 96588 debug optional solid-pop3d-dbgsym_0.15-31_amd64.deb 17561280e3ce665b667355d6d6a51399 5267 mail optional solid-pop3d_0.15-31_amd64.buildinfo afa3d7e40eb7fc62f35a62e007dd8701 57952 mail optional solid-pop3d_0.15-31_amd64.deb Wed May 10 08:34:15 UTC 2023 I: diffoscope 242 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.cMaQ5I9b/solid-pop3d_0.15-31.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.cMaQ5I9b/solid-pop3d_0.15-31.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.cMaQ5I9b/solid-pop3d_0.15-31.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.cMaQ5I9b/b1/solid-pop3d_0.15-31_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.cMaQ5I9b/b2/solid-pop3d_0.15-31_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.326s) 0.326s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.017s) 0.017s 12 calls diffoscope.comparators.binary.FilesystemFile 0.000s 10 calls abc.DotChangesFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Wed May 10 08:34:16 UTC 2023 I: diffoscope 242 found no differences in the changes files, and a .buildinfo file also exists. Wed May 10 08:34:16 UTC 2023 I: solid-pop3d from bookworm built successfully and reproducibly on amd64. Wed May 10 08:34:17 UTC 2023 I: Submitting .buildinfo files to external archives: Wed May 10 08:34:17 UTC 2023 I: Submitting 8.0K b1/solid-pop3d_0.15-31_amd64.buildinfo.asc Wed May 10 08:34:19 UTC 2023 I: Submitting 8.0K b2/solid-pop3d_0.15-31_amd64.buildinfo.asc Wed May 10 08:34:20 UTC 2023 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed May 10 08:34:20 UTC 2023 I: Done submitting .buildinfo files. Wed May 10 08:34:20 UTC 2023 I: Removing signed solid-pop3d_0.15-31_amd64.buildinfo.asc files: removed './b1/solid-pop3d_0.15-31_amd64.buildinfo.asc' removed './b2/solid-pop3d_0.15-31_amd64.buildinfo.asc'