I: pbuilder: network access will be disabled during build I: Current time: Wed Sep 11 19:19:37 -12 2024 I: pbuilder-time-stamp: 1726125577 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [obs-build_20210120-4.dsc] I: copying [./obs-build_20210120.orig.tar.gz] I: copying [./obs-build_20210120-4.debian.tar.xz] I: Extracting source gpgv: Signature made Fri Nov 11 10:46:51 2022 gpgv: using EDDSA key 83DCD17F44B22CC83656EDA1E8446B4AC8C77261 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./obs-build_20210120-4.dsc: no acceptable signature found dpkg-source: info: extracting obs-build in obs-build-20210120 dpkg-source: info: unpacking obs-build_20210120.orig.tar.gz dpkg-source: info: unpacking obs-build_20210120-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Use-obs-build-in-locations-and-executable-names.patch dpkg-source: info: applying 0002-HACK-make-glibc-build.patch dpkg-source: info: applying 0003-dsc-keep-everything.patch dpkg-source: info: applying 0004-build-recipe-dsc-don-t-rebuild-the-source-package.patch dpkg-source: info: applying 0005-Log-the-version-number-during-startup.patch dpkg-source: info: applying 0006-debootstrap-Print-the-exact-command-we-re-going-to-r.patch dpkg-source: info: applying 0007-deb-Show-version-of-each-package-that-we-preinstall.patch dpkg-source: info: applying 0008-build-recipe-dsc-List-contents-of-build-results.patch dpkg-source: info: applying 0009-build-recipe-dsc-Show-information-about-the-build-ch.patch dpkg-source: info: applying 0010-Add-a-new-changelog-entry-for-debian-packages.patch dpkg-source: info: applying 0011-Use-Python-3-for-the-openstack-console.patch dpkg-source: info: applying 0012-Fallback-to-stable-if-lsb-reports-a-non-supported-di.patch dpkg-source: info: applying 0013-Force-locale-to-C.UTF-8.patch dpkg-source: info: applying 0014-Force-the-local-timezone-to-be-UTC.patch dpkg-source: info: applying 0015-Unset-TERM-to-prevent-unexpectedly-colorized-output-.patch dpkg-source: info: applying 0016-init_buildsystem-Move-hostname-ip-entry-to-the-end-o.patch dpkg-source: info: applying 0017-Consistently-use-deb_chroot-instead-of-chroot-where-.patch dpkg-source: info: applying 0018-Escape-arguments-properly-to-avoid-leaking-spaces.patch dpkg-source: info: applying 0019-Wrap-chroot-su-in-a-function-to-consistently-set-up-.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/24443/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=6 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='d21ed34dc4784ec5a78b62da8df0ae25' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='24443' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.XG9NkTtE/pbuilderrc_O9a2 --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.XG9NkTtE/b1 --logfile b1/build.log obs-build_20210120-4.dsc' SUDO_GID='111' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' I: uname -a Linux infom07-i386 6.1.0-25-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/24443/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-python, python3-all, python3-websocket, libfindbin-libs-perl, libtimedate-perl, libyaml-libyaml-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19768 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-websocket; however: Package python3-websocket is not installed. pbuilder-satisfydepends-dummy depends on libfindbin-libs-perl; however: Package libfindbin-libs-perl is not installed. pbuilder-satisfydepends-dummy depends on libtimedate-perl; however: Package libtimedate-perl is not installed. pbuilder-satisfydepends-dummy depends on libyaml-libyaml-perl; however: Package libyaml-libyaml-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libfindbin-libs-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnsl2{a} libpipeline1{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libreadline8t64{a} libtimedate-perl{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-0-2{a} libyaml-libyaml-perl{a} m4{a} man-db{a} media-types{a} netbase{a} po-debconf{a} python3{a} python3-all{a} python3-autocommand{a} python3-inflect{a} python3-jaraco.context{a} python3-jaraco.functools{a} python3-minimal{a} python3-more-itertools{a} python3-pkg-resources{a} python3-setuptools{a} python3-typeguard{a} python3-typing-extensions{a} python3-websocket{a} python3-zipp{a} python3.12{a} python3.12-minimal{a} readline-common{a} sensible-utils{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 68 newly installed, 0 to remove and 0 not upgraded. Need to get 28.8 MB of archives. After unpacking 111 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main i386 libpython3.12-minimal i386 3.12.6-1 [813 kB] Get: 2 http://deb.debian.org/debian unstable/main i386 libexpat1 i386 2.6.3-1 [107 kB] Get: 3 http://deb.debian.org/debian unstable/main i386 python3.12-minimal i386 3.12.6-1 [2242 kB] Get: 4 http://deb.debian.org/debian unstable/main i386 python3-minimal i386 3.12.5-1 [26.7 kB] Get: 5 http://deb.debian.org/debian unstable/main i386 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian unstable/main i386 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian unstable/main i386 tzdata all 2024a-4 [255 kB] Get: 8 http://deb.debian.org/debian unstable/main i386 libkrb5support0 i386 1.21.3-3 [34.9 kB] Get: 9 http://deb.debian.org/debian unstable/main i386 libcom-err2 i386 1.47.1-1 [23.1 kB] Get: 10 http://deb.debian.org/debian unstable/main i386 libk5crypto3 i386 1.21.3-3 [83.6 kB] Get: 11 http://deb.debian.org/debian unstable/main i386 libkeyutils1 i386 1.6.3-3 [9432 B] Get: 12 http://deb.debian.org/debian unstable/main i386 libkrb5-3 i386 1.21.3-3 [350 kB] Get: 13 http://deb.debian.org/debian unstable/main i386 libgssapi-krb5-2 i386 1.21.3-3 [146 kB] Get: 14 http://deb.debian.org/debian unstable/main i386 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 15 http://deb.debian.org/debian unstable/main i386 libtirpc3t64 i386 1.3.4+ds-1.3 [90.2 kB] Get: 16 http://deb.debian.org/debian unstable/main i386 libnsl2 i386 1.3.0-3+b2 [42.4 kB] Get: 17 http://deb.debian.org/debian unstable/main i386 readline-common all 8.2-5 [69.3 kB] Get: 18 http://deb.debian.org/debian unstable/main i386 libreadline8t64 i386 8.2-5 [173 kB] Get: 19 http://deb.debian.org/debian unstable/main i386 libpython3.12-stdlib i386 3.12.6-1 [1961 kB] Get: 20 http://deb.debian.org/debian unstable/main i386 python3.12 i386 3.12.6-1 [669 kB] Get: 21 http://deb.debian.org/debian unstable/main i386 libpython3-stdlib i386 3.12.5-1 [9588 B] Get: 22 http://deb.debian.org/debian unstable/main i386 python3 i386 3.12.5-1 [27.6 kB] Get: 23 http://deb.debian.org/debian unstable/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 24 http://deb.debian.org/debian unstable/main i386 libmagic-mgc i386 1:5.45-3 [314 kB] Get: 25 http://deb.debian.org/debian unstable/main i386 libmagic1t64 i386 1:5.45-3 [114 kB] Get: 26 http://deb.debian.org/debian unstable/main i386 file i386 1:5.45-3 [42.9 kB] Get: 27 http://deb.debian.org/debian unstable/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 28 http://deb.debian.org/debian unstable/main i386 libuchardet0 i386 0.0.8-1+b1 [69.1 kB] Get: 29 http://deb.debian.org/debian unstable/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 30 http://deb.debian.org/debian unstable/main i386 bsdextrautils i386 2.40.2-8 [102 kB] Get: 31 http://deb.debian.org/debian unstable/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 32 http://deb.debian.org/debian unstable/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 33 http://deb.debian.org/debian unstable/main i386 m4 i386 1.4.19-4 [293 kB] Get: 34 http://deb.debian.org/debian unstable/main i386 autoconf all 2.72-3 [493 kB] Get: 35 http://deb.debian.org/debian unstable/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 36 http://deb.debian.org/debian unstable/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 37 http://deb.debian.org/debian unstable/main i386 autopoint all 0.22.5-2 [723 kB] Get: 38 http://deb.debian.org/debian unstable/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 39 http://deb.debian.org/debian unstable/main i386 libtool all 2.4.7-7 [517 kB] Get: 40 http://deb.debian.org/debian unstable/main i386 dh-autoreconf all 20 [17.1 kB] Get: 41 http://deb.debian.org/debian unstable/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 42 http://deb.debian.org/debian unstable/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 43 http://deb.debian.org/debian unstable/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 44 http://deb.debian.org/debian unstable/main i386 libelf1t64 i386 0.191-2 [194 kB] Get: 45 http://deb.debian.org/debian unstable/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 46 http://deb.debian.org/debian unstable/main i386 libicu72 i386 72.1-5 [9550 kB] Get: 47 http://deb.debian.org/debian unstable/main i386 libxml2 i386 2.12.7+dfsg-3+b1 [704 kB] Get: 48 http://deb.debian.org/debian unstable/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 49 http://deb.debian.org/debian unstable/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 50 http://deb.debian.org/debian unstable/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 51 http://deb.debian.org/debian unstable/main i386 debhelper all 13.20 [915 kB] Get: 52 http://deb.debian.org/debian unstable/main i386 python3-autocommand all 2.2.2-3 [13.6 kB] Get: 53 http://deb.debian.org/debian unstable/main i386 python3-more-itertools all 10.4.0-1 [63.7 kB] Get: 54 http://deb.debian.org/debian unstable/main i386 python3-typing-extensions all 4.12.2-2 [73.0 kB] Get: 55 http://deb.debian.org/debian unstable/main i386 python3-typeguard all 4.3.0-1 [36.5 kB] Get: 56 http://deb.debian.org/debian unstable/main i386 python3-inflect all 7.3.1-1 [42.2 kB] Get: 57 http://deb.debian.org/debian unstable/main i386 python3-jaraco.context all 6.0.0-1 [7984 B] Get: 58 http://deb.debian.org/debian unstable/main i386 python3-jaraco.functools all 4.0.2-1 [11.7 kB] Get: 59 http://deb.debian.org/debian unstable/main i386 python3-pkg-resources all 74.1.2-2 [213 kB] Get: 60 http://deb.debian.org/debian unstable/main i386 python3-zipp all 3.20.1-1 [10.2 kB] Get: 61 http://deb.debian.org/debian unstable/main i386 python3-setuptools all 74.1.2-2 [736 kB] Get: 62 http://deb.debian.org/debian unstable/main i386 dh-python all 6.20240824 [109 kB] Get: 63 http://deb.debian.org/debian unstable/main i386 libfindbin-libs-perl all 3.0.2-1 [29.7 kB] Get: 64 http://deb.debian.org/debian unstable/main i386 libtimedate-perl all 2.3300-2 [39.3 kB] Get: 65 http://deb.debian.org/debian unstable/main i386 libyaml-0-2 i386 0.2.5-1+b1 [55.2 kB] Get: 66 http://deb.debian.org/debian unstable/main i386 libyaml-libyaml-perl i386 0.89+ds-1+b1 [35.9 kB] Get: 67 http://deb.debian.org/debian unstable/main i386 python3-all i386 3.12.5-1 [1044 B] Get: 68 http://deb.debian.org/debian unstable/main i386 python3-websocket all 1.7.0-1 [45.0 kB] Fetched 28.8 MB in 0s (91.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.12-minimal:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19768 files and directories currently installed.) Preparing to unpack .../libpython3.12-minimal_3.12.6-1_i386.deb ... Unpacking libpython3.12-minimal:i386 (3.12.6-1) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../libexpat1_2.6.3-1_i386.deb ... Unpacking libexpat1:i386 (2.6.3-1) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../python3.12-minimal_3.12.6-1_i386.deb ... Unpacking python3.12-minimal (3.12.6-1) ... Setting up libpython3.12-minimal:i386 (3.12.6-1) ... Setting up libexpat1:i386 (2.6.3-1) ... Setting up python3.12-minimal (3.12.6-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20088 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.12.5-1_i386.deb ... Unpacking python3-minimal (3.12.5-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package libkrb5support0:i386. Preparing to unpack .../04-libkrb5support0_1.21.3-3_i386.deb ... Unpacking libkrb5support0:i386 (1.21.3-3) ... Selecting previously unselected package libcom-err2:i386. Preparing to unpack .../05-libcom-err2_1.47.1-1_i386.deb ... Unpacking libcom-err2:i386 (1.47.1-1) ... Selecting previously unselected package libk5crypto3:i386. Preparing to unpack .../06-libk5crypto3_1.21.3-3_i386.deb ... Unpacking libk5crypto3:i386 (1.21.3-3) ... Selecting previously unselected package libkeyutils1:i386. Preparing to unpack .../07-libkeyutils1_1.6.3-3_i386.deb ... Unpacking libkeyutils1:i386 (1.6.3-3) ... Selecting previously unselected package libkrb5-3:i386. Preparing to unpack .../08-libkrb5-3_1.21.3-3_i386.deb ... Unpacking libkrb5-3:i386 (1.21.3-3) ... Selecting previously unselected package libgssapi-krb5-2:i386. Preparing to unpack .../09-libgssapi-krb5-2_1.21.3-3_i386.deb ... Unpacking libgssapi-krb5-2:i386 (1.21.3-3) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../10-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:i386. Preparing to unpack .../11-libtirpc3t64_1.3.4+ds-1.3_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3 to /lib/i386-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/i386-linux-gnu/libtirpc.so.3.0.0 to /lib/i386-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:i386 (1.3.4+ds-1.3) ... Selecting previously unselected package libnsl2:i386. Preparing to unpack .../12-libnsl2_1.3.0-3+b2_i386.deb ... Unpacking libnsl2:i386 (1.3.0-3+b2) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_8.2-5_all.deb ... Unpacking readline-common (8.2-5) ... Selecting previously unselected package libreadline8t64:i386. Preparing to unpack .../14-libreadline8t64_8.2-5_i386.deb ... Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8 to /lib/i386-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libhistory.so.8.2 to /lib/i386-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8 to /lib/i386-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/i386-linux-gnu/libreadline.so.8.2 to /lib/i386-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:i386 (8.2-5) ... Selecting previously unselected package libpython3.12-stdlib:i386. Preparing to unpack .../15-libpython3.12-stdlib_3.12.6-1_i386.deb ... Unpacking libpython3.12-stdlib:i386 (3.12.6-1) ... Selecting previously unselected package python3.12. Preparing to unpack .../16-python3.12_3.12.6-1_i386.deb ... Unpacking python3.12 (3.12.6-1) ... Selecting previously unselected package libpython3-stdlib:i386. Preparing to unpack .../17-libpython3-stdlib_3.12.5-1_i386.deb ... Unpacking libpython3-stdlib:i386 (3.12.5-1) ... Setting up python3-minimal (3.12.5-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21160 files and directories currently installed.) Preparing to unpack .../00-python3_3.12.5-1_i386.deb ... Unpacking python3 (3.12.5-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.45-3_i386.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../03-libmagic1t64_1%3a5.45-3_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.45-3_i386.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../06-libuchardet0_0.0.8-1+b1_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.40.2-8_i386.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../09-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../22-libelf1t64_0.191-2_i386.deb ... Unpacking libelf1t64:i386 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../24-libicu72_72.1-5_i386.deb ... Unpacking libicu72:i386 (72.1-5) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../25-libxml2_2.12.7+dfsg-3+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg-3+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../30-python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../31-python3-more-itertools_10.4.0-1_all.deb ... Unpacking python3-more-itertools (10.4.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../32-python3-typing-extensions_4.12.2-2_all.deb ... Unpacking python3-typing-extensions (4.12.2-2) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../33-python3-typeguard_4.3.0-1_all.deb ... Unpacking python3-typeguard (4.3.0-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../34-python3-inflect_7.3.1-1_all.deb ... Unpacking python3-inflect (7.3.1-1) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../35-python3-jaraco.context_6.0.0-1_all.deb ... Unpacking python3-jaraco.context (6.0.0-1) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../36-python3-jaraco.functools_4.0.2-1_all.deb ... Unpacking python3-jaraco.functools (4.0.2-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../37-python3-pkg-resources_74.1.2-2_all.deb ... Unpacking python3-pkg-resources (74.1.2-2) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../38-python3-zipp_3.20.1-1_all.deb ... Unpacking python3-zipp (3.20.1-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../39-python3-setuptools_74.1.2-2_all.deb ... Unpacking python3-setuptools (74.1.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../40-dh-python_6.20240824_all.deb ... Unpacking dh-python (6.20240824) ... Selecting previously unselected package libfindbin-libs-perl. Preparing to unpack .../41-libfindbin-libs-perl_3.0.2-1_all.deb ... Unpacking libfindbin-libs-perl (3.0.2-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../42-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libyaml-0-2:i386. Preparing to unpack .../43-libyaml-0-2_0.2.5-1+b1_i386.deb ... Unpacking libyaml-0-2:i386 (0.2.5-1+b1) ... Selecting previously unselected package libyaml-libyaml-perl. Preparing to unpack .../44-libyaml-libyaml-perl_0.89+ds-1+b1_i386.deb ... Unpacking libyaml-libyaml-perl (0.89+ds-1+b1) ... Selecting previously unselected package python3-all. Preparing to unpack .../45-python3-all_3.12.5-1_i386.deb ... Unpacking python3-all (3.12.5-1) ... Selecting previously unselected package python3-websocket. Preparing to unpack .../46-python3-websocket_1.7.0-1_all.deb ... Unpacking python3-websocket (1.7.0-1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libkeyutils1:i386 (1.6.3-3) ... Setting up libicu72:i386 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-0-2:i386 (0.2.5-1+b1) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3) ... Setting up libyaml-libyaml-perl (0.89+ds-1+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up libfindbin-libs-perl (3.0.2-1) ... Setting up libcom-err2:i386 (1.47.1-1) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:i386 (0.191-2) ... Setting up libkrb5support0:i386 (1.21.3-3) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Sep 12 07:20:01 UTC 2024. Universal Time is now: Thu Sep 12 07:20:01 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up libk5crypto3:i386 (1.21.3-3) ... Setting up autoconf (2.72-3) ... Setting up libtimedate-perl (2.3300-2) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b1) ... Setting up netbase (6.4) ... Setting up libkrb5-3:i386 (1.21.3-3) ... Setting up readline-common (8.2-5) ... Setting up libxml2:i386 (2.12.7+dfsg-3+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:i386 (1.21.3-3) ... Setting up libreadline8t64:i386 (8.2-5) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtirpc3t64:i386 (1.3.4+ds-1.3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libnsl2:i386 (1.3.0-3+b2) ... Setting up libpython3.12-stdlib:i386 (3.12.6-1) ... Setting up python3.12 (3.12.6-1) ... Setting up debhelper (13.20) ... Setting up libpython3-stdlib:i386 (3.12.5-1) ... Setting up python3 (3.12.5-1) ... Setting up python3-zipp (3.20.1-1) ... Setting up python3-autocommand (2.2.2-3) ... Setting up python3-typing-extensions (4.12.2-2) ... Setting up python3-websocket (1.7.0-1) ... Setting up python3-more-itertools (10.4.0-1) ... Setting up python3-jaraco.functools (4.0.2-1) ... Setting up python3-jaraco.context (6.0.0-1) ... Setting up python3-typeguard (4.3.0-1) ... Setting up python3-all (3.12.5-1) ... Setting up python3-inflect (7.3.1-1) ... Setting up python3-pkg-resources (74.1.2-2) ... Setting up python3-setuptools (74.1.2-2) ... Setting up dh-python (6.20240824) ... Processing triggers for libc-bin (2.40-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/reproducible-path/obs-build-20210120/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../obs-build_20210120-4_source.changes dpkg-buildpackage: info: source package obs-build dpkg-buildpackage: info: source version 20210120-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andrej Shadura dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 dpkg-source: info: using options from obs-build-20210120/debian/source/options: --extend-diff-ignore=configs/sles11.conf fakeroot debian/rules clean dh clean --with python3 dh_auto_clean debian/rules override_dh_clean make[1]: Entering directory '/build/reproducible-path/obs-build-20210120' rm -f version dh_clean make[1]: Leaving directory '/build/reproducible-path/obs-build-20210120' debian/rules build make: 'build' is up to date. fakeroot debian/rules binary dh binary --with python3 dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j6 "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/obs-build-20210120' echo 0.1 > version make[1]: Leaving directory '/build/reproducible-path/obs-build-20210120' dh_auto_test make -j6 test make[1]: Entering directory '/build/reproducible-path/obs-build-20210120' PERL5LIB=. prove -v t/changelog2spec.t .. 1..11 ok 1 - changelog2spec --selftest rpm python-rpm.changes rpm.changes ok 2 - changelog2spec --selftest python-rpm python-rpm.changes rpm.changes ok 3 - changelog2spec --selftest antlr antlr.changes antlr-bootstrap.changes ok 4 - changelog2spec --selftest antlr anyunrelated.changes ok 5 - changelog2spec --selftest antlr-bootstrap antlr.changes antlr-bootstrap.changes ok 6 - changelog2spec --selftest antlr-bootstrap antlr.changes ok 7 - changelog2spec --selftest antlr-bootstrap antlr.changes antlr-other.changes ok 8 - changelog2spec --selftest foo foo.changes _service:obs_scm:foo.changes ok 9 - changelog2spec --selftest _service:obs_scm:foo foo.changes _service:obs_scm:foo.changes ok 10 - changelog2spec --selftest _service:obs_scm:foo foo.changes foo-bar.changes ok 11 - changelog2spec --selftest _service:obs_scm:foo-bar foo.changes foo-other.changes ok t/conflicts.t ....... 1..13 ok 1 - install a ok 2 - install a d ok 3 - install a e ok 4 - install a d e ok 5 - install a f ok 6 - install b f ok 7 - install b h ok 8 - install i !i ok 9 - install k !j ok 10 - install i j ok 11 - install i k ok 12 - install l ok 13 - install m ok t/determinism.t ..... 1..1 ok 1 - install a ok t/expression.t ...... 1..45 ok 1 - 4*1024 ok 2 - 5 < 1 ok 3 - (4 + 5) * 2 == 18 ok 4 - 5 || 0 ok 5 - 5 && 0 ok 6 - ! "" ok 7 - ! "foo" ok 8 - 0 || 3 ok 9 - 2 || 3 ok 10 - 0 || 0 ok 11 - 2 || 0 ok 12 - "" || "foo" ok 13 - "bar" || "foo" ok 14 - 0 && 3 ok 15 - 2 && 3 ok 16 - 0 && 0 ok 17 - 2 && 0 ok 18 - "" && "foo" ok 19 - "bar" && "foo" ok 20 - 0 ? 2 : 3 ok 21 - 1 ? 2 : 3 ok 22 - 0 ? 0 ? 3 : 4 : 0 ? 6 : 7 ok 23 - 0 ? 0 ? 3 : 4 : 5 ? 6 : 7 ok 24 - 0 ? 2 ? 3 : 4 : 0 ? 6 : 7 ok 25 - 0 ? 2 ? 3 : 4 : 5 ? 6 : 7 ok 26 - 1 ? 0 ? 3 : 4 : 0 ? 6 : 7 ok 27 - 1 ? 0 ? 3 : 4 : 5 ? 6 : 7 ok 28 - 1 ? 2 ? 3 : 4 : 0 ? 6 : 7 ok 29 - 1 ? 2 ? 3 : 4 : 5 ? 6 : 7 ok 30 - 1 || 2 && 0 ok 31 - 1 - 1 - 1 ok 32 - 1 + 2 * 3 ok 33 - 2 * -2 ok 34 - 7 == 1 + 2 * 3 ok 35 - 5 || 2 ? 3 : 4 ok 36 - "foo" + "bar" ok 37 - v"1.2" > v"1" ok 38 - v"1.2" < v"1" ok 39 - v"1.2" > v"1.2" ok 40 - v"1.2" < v"1.2" ok 41 - v"1.2" >= v"1.2" ok 42 - v"1.2" <= v"1.2" ok 43 - v"1.2" == v"1.2" ok 44 - v"1.2" != v"1.2" ok 45 - v"1.2" != v"1" ok t/flatpak.t ......... # Subtest: parse ok 1 - parse() YAML flatpak content ok 2 - parse() YAML flatpak file ok 3 - parse() JSON flatpak file 1..3 ok 1 - parse # Subtest: show ok 1 - Build::Flatpak::show name ok 2 - Build::Flatpak::show sources 1..2 ok 2 - show 1..2 ok t/macros.t .......... 1..20 ok 1 - %% ok 2 - %{%} ok 3 - %not_defined ok 4 - %{not_defined} ok 5 - %{} ok 6 - %{ test } ok 7 - %define this that # %{this} ok 8 - %define this that # %{?this} ok 9 - %define this that # %{?that} ok 10 - %define this that # %{?!this} ok 11 - %define this that # %{?!that} ok 12 - %define this that # %{?this:foo} ok 13 - %define this that # %{?that:foo} ok 14 - %define this that # %{?!this:foo} ok 15 - %define this that # %{?!that:foo} ok 16 - %define this that # %define that_that foo # %{expand:%%{%{this}_that}} ok 17 - %define bar() "Bar %\#: %{?1} %{?2}" # %define foo() "Foo %#: %{?1} %{?2}" %bar a # %foo 1 2 ok 18 - %define foo hello" + "world # %["%foo"] ok 19 - %define foo hello # %define bar world # %{foo:%{bar}} ok 20 - %[1 + %[2 * 3]] ok t/obsoletes.t ....... 1..9 ok 1 - install a ok 2 - install a d ok 3 - install a e ok 4 - install a d e ok 5 - install a f ok 6 - install b d ok 7 - install h ok 8 - install h d ok 9 - install h b ok t/ordep.t ........... 1..4 ok 1 - install a ok 2 - install b ok 3 - install c ok 4 - install g ok t/parse_spec.t ...... 1..9 ok 1 - preamble ok 2 - simple build requires ok 3 - rich build requires ok 4 - pre requires ok 5 - if statements ok 6 - nested if statements ok 7 - ifarch statements ok 8 - include statement ok 9 - elif statements ok t/recommends.t ...... 1..4 ok 1 - install a ok 2 - install a d ok 3 - install a e ok 4 - install a d e ok t/requires.t ........ 1..20 ok 1 - install nothing ok 2 - install n ok 3 - install f ok 4 - install a ok 5 - install c ok 6 - install c with prefer ok 7 - install c with neg prefer ok 8 - install ign1 ok 9 - install ign2 ok 10 - install ign3 ok 11 - install ign6 ok 12 - install ign8 ok 13 - install ign2 -ign2 ok 14 - install ign8 -ign7 ok 15 - install ign5 -ign5 ok 16 - install ign4 -ign5 ok 17 - install ign5 ok 18 - install ign4 ok 19 - install h ok 20 - install --directdepsend-- h ok t/richdeps.t ........ 1..45 ok 1 - install () ok 2 - install (n and ) ok 3 - install (n foo m) ok 4 - install n ok 5 - install (n or o) ok 6 - install (n and o) ok 7 - install n1 ok 8 - install (n2 and d) ok 9 - install (n2 or d) ok 10 - install a ok 11 - install i j ok 12 - install (b if b) ok 13 - install (n if n) ok 14 - install lr ok 15 - install lc1 ok 16 - install lc2 ok 17 - install m ok 18 - install b c d !(b and c and d) ok 19 - install !(n if n) ok 20 - install b cx d ok 21 - install ign ok 22 - install ign1 ok 23 - install ign2 ok 24 - install ign3 ok 25 - install b ign4 ok 26 - install b ok 27 - install bad1 ok 28 - install bad2 ok 29 - install sc b ok 30 - install ifelse ok 31 - install ifelse i ok 32 - install ifelse c ok 33 - install unless b ok 34 - install unless b !i ok 35 - install unlesselse b c ok 36 - install unlesselse b ok 37 - install unlesselse c ok 38 - install (wx and wy) ok 39 - install (wx with wy) ok 40 - install (wx without wy) ok 41 - install (wy without wx) ok 42 - install (wa with wa) ok 43 - install (wa with nnn) ok 44 - install (wa without wa) ok 45 - install (wa without nnn) ok All tests successful. Files=12, Tests=183, 2 wallclock secs ( 0.06 usr 0.02 sys + 1.88 cusr 0.24 csys = 2.20 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/obs-build-20210120' create-stamp debian/debhelper-build-stamp dh_testroot dh_prep dh_auto_install --destdir=debian/obs-build/ make -j6 install DESTDIR=/build/reproducible-path/obs-build-20210120/debian/obs-build AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/obs-build-20210120' echo 0.1 > version install -m755 -d \ /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/configs \ /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/baselibs_configs \ /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/Build \ /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/emulator \ /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/bin \ /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/share/man/man1 install -m755 \ build \ vc \ createdirdeps \ order \ expanddeps \ computeblocklists \ extractbuild \ getbinaryid \ getbuildids \ killchroot \ queryconfig \ common_functions \ init_buildsystem \ substitutedeps \ debtransform \ debtransformbz2 \ debtransformxz \ debtransformzip \ mkbaselibs \ mkdrpms \ listinstalled \ call-flatpak-builder \ createzyppdeps \ createarchdeps \ createdebdeps \ createrepomddeps \ createyastdeps \ changelog2spec \ spec2changelog \ download \ runservices \ spec_add_patch \ spectool \ signdummy \ unrpm \ telnet_login_wrapper \ startdockerd \ dummyhttpserver \ patchdockerfile \ obs-docker-support \ create_container_package_list \ call-podman \ /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build install -m644 \ qemu-reg \ lxc.conf \ build-validate-params \ openstack-console \ /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build install -m755 emulator/emulator.sh /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/emulator/ install -m644 Build/*.pm /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/Build install -m644 build-vm build-vm-* /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build install -m644 build-recipe build-recipe-* /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build install -m644 build-pkg build-pkg-* /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build install -m644 *.pm /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build install -m644 version /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build install -m644 configs/* /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/configs install -m644 baselibs_configs/* /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/baselibs_configs install -d /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/share/man/man1 install -T -m644 build.1 /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/share/man/man1/obs-build.1 install -T -m644 unrpm.1 /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/share/man/man1/unrpm.1 ln -sf /usr/lib/obs-build/build /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/bin/obs-build ln -sf /usr/lib/obs-build/vc /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/bin/obs-buildvc ln -sf /usr/lib/obs-build/unrpm /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/bin/unrpm ln -s baselibs_configs/baselibs_global.conf /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/baselibs_global.conf ln -s baselibs_configs/baselibs_global-deb.conf /build/reproducible-path/obs-build-20210120/debian/obs-build/usr/lib/obs-build/baselibs_global-deb.conf make[1]: Leaving directory '/build/reproducible-path/obs-build-20210120' debian/rules override_dh_install make[1]: Entering directory '/build/reproducible-path/obs-build-20210120' echo "20210120-4" > debian/obs-build/usr/lib/obs-build/version dh_install # file marked executable, fix it. chmod a-x debian/obs-build/usr/lib/obs-build/build-validate-params # fix script execution chmod a+x debian/obs-build/usr/lib/obs-build/build-vm-openstack make[1]: Leaving directory '/build/reproducible-path/obs-build-20210120' dh_installdocs dh_installchangelogs dh_installman dh_python3 dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dpkg-gencontrol: warning: Depends field of package obs-build: substitution variable ${python3:Depends} used, but is not defined dh_md5sums dh_builddeb dpkg-deb: building package 'obs-build' in '../obs-build_20210120-4_all.deb'. dpkg-genbuildinfo --build=binary -O../obs-build_20210120-4_i386.buildinfo dpkg-genchanges --build=binary -O../obs-build_20210120-4_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-source: info: using options from obs-build-20210120/debian/source/options: --extend-diff-ignore=configs/sles11.conf dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/24443 and its subdirectories I: Current time: Wed Sep 11 19:20:21 -12 2024 I: pbuilder-time-stamp: 1726125621