I: pbuilder: network access will be disabled during build I: Current time: Fri May 23 21:09:54 +14 2025 I: pbuilder-time-stamp: 1747984194 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libtest-bdd-cucumber-perl_0.86-1.dsc] I: copying [./libtest-bdd-cucumber-perl_0.86.orig.tar.gz] I: copying [./libtest-bdd-cucumber-perl_0.86-1.debian.tar.xz] I: Extracting source gpgv: Signature made Tue Aug 29 19:45:40 2023 gpgv: using RSA key 8F91B227C7D6F2B1948C8236793CF67E8F0D11DA gpgv: issuer "emollier@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libtest-bdd-cucumber-perl_0.86-1.dsc: no acceptable signature found dpkg-source: info: extracting libtest-bdd-cucumber-perl in libtest-bdd-cucumber-perl-0.86 dpkg-source: info: unpacking libtest-bdd-cucumber-perl_0.86.orig.tar.gz dpkg-source: info: unpacking libtest-bdd-cucumber-perl_0.86-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying autopkgtest.patch dpkg-source: info: applying typo.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3044/tmp/hooks/D01_modify_environment starting debug: Running on ionos16-i386. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 May 23 07:10 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/3044/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/3044/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="21" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") BASH_VERSION='5.2.21(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=i386 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=21 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=i686 HOST_ARCH=i386 IFS=' ' INVOCATION_ID=267299ad280f4b35842a6825fa54fe51 LANG=C LANGUAGE=de_CH:de LC_ALL=C LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so MACHTYPE=i686-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=3044 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.c39svvW6/pbuilderrc_5wyL --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.c39svvW6/b2 --logfile b2/build.log libtest-bdd-cucumber-perl_0.86-1.dsc' SUDO_GID=112 SUDO_UID=107 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://85.184.249.68:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 21 17:46 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3044/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcucumber-tagexpressions-perl, libfile-copy-recursive-perl, libfile-find-rule-perl, libio-stringy-perl, libjson-maybexs-perl, libmodule-runtime-perl, libmoo-perl, libmoox-handlesvia-perl, libpath-class-perl, libpath-tiny-perl, libscalar-list-utils-perl, libtest-differences-perl, libtest-exception-perl, libtest-harness-perl, libtest-simple-perl, libtest2-suite-perl, libtype-tiny-perl, libyaml-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19874 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcucumber-tagexpressions-perl; however: Package libcucumber-tagexpressions-perl is not installed. pbuilder-satisfydepends-dummy depends on libfile-copy-recursive-perl; however: Package libfile-copy-recursive-perl is not installed. pbuilder-satisfydepends-dummy depends on libfile-find-rule-perl; however: Package libfile-find-rule-perl is not installed. pbuilder-satisfydepends-dummy depends on libio-stringy-perl; however: Package libio-stringy-perl is not installed. pbuilder-satisfydepends-dummy depends on libjson-maybexs-perl; however: Package libjson-maybexs-perl is not installed. pbuilder-satisfydepends-dummy depends on libmodule-runtime-perl; however: Package libmodule-runtime-perl is not installed. pbuilder-satisfydepends-dummy depends on libmoo-perl; however: Package libmoo-perl is not installed. pbuilder-satisfydepends-dummy depends on libmoox-handlesvia-perl; however: Package libmoox-handlesvia-perl is not installed. pbuilder-satisfydepends-dummy depends on libpath-class-perl; however: Package libpath-class-perl is not installed. pbuilder-satisfydepends-dummy depends on libpath-tiny-perl; however: Package libpath-tiny-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-differences-perl; however: Package libtest-differences-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-exception-perl; however: Package libtest-exception-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest2-suite-perl; however: Package libtest2-suite-perl is not installed. pbuilder-satisfydepends-dummy depends on libtype-tiny-perl; however: Package libtype-tiny-perl is not installed. pbuilder-satisfydepends-dummy depends on libyaml-perl; however: Package libyaml-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libalgorithm-diff-perl{a} libarchive-zip-perl{a} libb-hooks-op-check-perl{a} libcapture-tiny-perl{a} libclass-method-modifiers-perl{a} libclass-xsaccessor-perl{a} libcpanel-json-xs-perl{a} libcucumber-tagexpressions-perl{a} libdata-perl-perl{a} libdebhelper-perl{a} libdevel-callchecker-perl{a} libdynaloader-functions-perl{a} libelf1{a} libexporter-tiny-perl{a} libfile-copy-recursive-perl{a} libfile-find-rule-perl{a} libfile-stripnondeterminism-perl{a} libicu72{a} libimport-into-perl{a} libio-stringy-perl{a} libjson-maybexs-perl{a} liblist-moreutils-perl{a} liblist-moreutils-xs-perl{a} libmagic-mgc{a} libmagic1{a} libmodule-runtime-perl{a} libmoo-perl{a} libmoox-handlesvia-perl{a} libnumber-compare-perl{a} libparams-classify-perl{a} libpath-class-perl{a} libpath-tiny-perl{a} libpipeline1{a} librole-tiny-perl{a} libstrictures-perl{a} libsub-override-perl{a} libsub-quote-perl{a} libsub-uplevel-perl{a} libterm-table-perl{a} libtest-differences-perl{a} libtest-exception-perl{a} libtest2-suite-perl{a} libtext-diff-perl{a} libtext-glob-perl{a} libtool{a} libtype-tiny-perl{a} libuchardet0{a} libxml2{a} libyaml-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libalgorithm-diff-xs-perl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libmodule-pluggable-perl libnamespace-clean-perl libref-util-perl libtype-tiny-xs-perl libunicode-linebreak-perl libunicode-utf8-perl libxstring-perl libyaml-libyaml-perl libyaml-syck-perl lynx wget 0 packages upgraded, 67 newly installed, 0 to remove and 0 not upgraded. Need to get 21.1 MB of archives. After unpacking 78.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-2+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1 i386 1:5.45-2+b1 [114 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-2+b1 [43.0 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.21-14+b1 [162 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b1 [69.1 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-3 [1195 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.39.3-6 [93.3 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.7-2 [39.7 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.12.0-3 [1413 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libsub-override-perl all 0.10-1 [10.6 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian trixie/main i386 libelf1 i386 0.190-1+b1 [182 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1 [118 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-4+b1 [9549 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.9.14+dfsg-1.3+b2 [727 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 gettext i386 0.21-14+b1 [1311 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main i386 debhelper all 13.15.3 [901 kB] Get: 31 http://deb.debian.org/debian trixie/main i386 libalgorithm-diff-perl all 1.201-1 [43.3 kB] Get: 32 http://deb.debian.org/debian trixie/main i386 libb-hooks-op-check-perl i386 0.22-2+b2 [10.7 kB] Get: 33 http://deb.debian.org/debian trixie/main i386 libcapture-tiny-perl all 0.48-2 [24.6 kB] Get: 34 http://deb.debian.org/debian trixie/main i386 libclass-method-modifiers-perl all 2.15-1 [18.0 kB] Get: 35 http://deb.debian.org/debian trixie/main i386 libclass-xsaccessor-perl i386 1.19-4+b2 [37.7 kB] Get: 36 http://deb.debian.org/debian trixie/main i386 libcpanel-json-xs-perl i386 4.37-1+b1 [133 kB] Get: 37 http://deb.debian.org/debian trixie/main i386 libdynaloader-functions-perl all 0.003-3 [12.7 kB] Get: 38 http://deb.debian.org/debian trixie/main i386 libdevel-callchecker-perl i386 0.008-2+b1 [15.1 kB] Get: 39 http://deb.debian.org/debian trixie/main i386 libparams-classify-perl i386 0.015-2+b2 [23.1 kB] Get: 40 http://deb.debian.org/debian trixie/main i386 libmodule-runtime-perl all 0.016-2 [19.6 kB] Get: 41 http://deb.debian.org/debian trixie/main i386 libimport-into-perl all 1.002005-2 [11.3 kB] Get: 42 http://deb.debian.org/debian trixie/main i386 librole-tiny-perl all 2.002004-1 [21.4 kB] Get: 43 http://deb.debian.org/debian trixie/main i386 libsub-quote-perl all 2.006008-1 [21.8 kB] Get: 44 http://deb.debian.org/debian trixie/main i386 libmoo-perl all 2.005005-1 [58.0 kB] Get: 45 http://deb.debian.org/debian trixie/main i386 libcucumber-tagexpressions-perl all 6.1.0-1 [11.2 kB] Get: 46 http://deb.debian.org/debian trixie/main i386 libexporter-tiny-perl all 1.006002-1 [38.7 kB] Get: 47 http://deb.debian.org/debian trixie/main i386 liblist-moreutils-xs-perl i386 0.430-3+b2 [45.2 kB] Get: 48 http://deb.debian.org/debian trixie/main i386 liblist-moreutils-perl all 0.430-2 [46.9 kB] Get: 49 http://deb.debian.org/debian trixie/main i386 libstrictures-perl all 2.000006-1 [18.6 kB] Get: 50 http://deb.debian.org/debian trixie/main i386 libdata-perl-perl all 0.002011-2 [40.8 kB] Get: 51 http://deb.debian.org/debian trixie/main i386 libfile-copy-recursive-perl all 0.45-4 [20.0 kB] Get: 52 http://deb.debian.org/debian trixie/main i386 libnumber-compare-perl all 0.03-3 [6332 B] Get: 53 http://deb.debian.org/debian trixie/main i386 libtext-glob-perl all 0.11-3 [7676 B] Get: 54 http://deb.debian.org/debian trixie/main i386 libfile-find-rule-perl all 0.34-3 [26.6 kB] Get: 55 http://deb.debian.org/debian trixie/main i386 libio-stringy-perl all 2.111-3 [56.5 kB] Get: 56 http://deb.debian.org/debian trixie/main i386 libjson-maybexs-perl all 1.004005-1 [12.9 kB] Get: 57 http://deb.debian.org/debian trixie/main i386 libmoox-handlesvia-perl all 0.001009-2 [18.4 kB] Get: 58 http://deb.debian.org/debian trixie/main i386 libpath-class-perl all 0.37-4 [42.7 kB] Get: 59 http://deb.debian.org/debian trixie/main i386 libpath-tiny-perl all 0.144-1 [56.4 kB] Get: 60 http://deb.debian.org/debian trixie/main i386 libsub-uplevel-perl all 0.2800-3 [14.0 kB] Get: 61 http://deb.debian.org/debian trixie/main i386 libterm-table-perl all 0.018-1 [29.0 kB] Get: 62 http://deb.debian.org/debian trixie/main i386 libtext-diff-perl all 1.45-2 [27.2 kB] Get: 63 http://deb.debian.org/debian trixie/main i386 libtest-differences-perl all 0.71-1 [17.9 kB] Get: 64 http://deb.debian.org/debian trixie/main i386 libtest-exception-perl all 0.43-3 [16.9 kB] Get: 65 http://deb.debian.org/debian trixie/main i386 libtest2-suite-perl all 0.000159-1 [402 kB] Get: 66 http://deb.debian.org/debian trixie/main i386 libtype-tiny-perl all 2.004000-1 [357 kB] Get: 67 http://deb.debian.org/debian trixie/main i386 libyaml-perl all 1.31-1 [64.8 kB] Fetched 21.1 MB in 0s (87.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19874 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-2+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-2+b1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../02-libmagic1_1%3a5.45-2+b1_i386.deb ... Unpacking libmagic1:i386 (1:5.45-2+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-2+b1_i386.deb ... Unpacking file (1:5.45-2+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_i386.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-3_i386.deb ... Unpacking groff-base (1.23.0-3) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.39.3-6_i386.deb ... Unpacking bsdextrautils (2.39.3-6) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.7-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.0-3_i386.deb ... Unpacking man-db (2.12.0-3) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.10-1_all.deb ... Unpacking libsub-override-perl (0.10-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../22-libelf1_0.190-1+b1_i386.deb ... Unpacking libelf1:i386 (0.190-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_i386.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../24-libicu72_72.1-4+b1_i386.deb ... Unpacking libicu72:i386 (72.1-4+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3+b2_i386.deb ... Unpacking libxml2:i386 (2.9.14+dfsg-1.3+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-14+b1_i386.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libalgorithm-diff-perl. Preparing to unpack .../30-libalgorithm-diff-perl_1.201-1_all.deb ... Unpacking libalgorithm-diff-perl (1.201-1) ... Selecting previously unselected package libb-hooks-op-check-perl:i386. Preparing to unpack .../31-libb-hooks-op-check-perl_0.22-2+b2_i386.deb ... Unpacking libb-hooks-op-check-perl:i386 (0.22-2+b2) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../32-libcapture-tiny-perl_0.48-2_all.deb ... Unpacking libcapture-tiny-perl (0.48-2) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../33-libclass-method-modifiers-perl_2.15-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.15-1) ... Selecting previously unselected package libclass-xsaccessor-perl. Preparing to unpack .../34-libclass-xsaccessor-perl_1.19-4+b2_i386.deb ... Unpacking libclass-xsaccessor-perl (1.19-4+b2) ... Selecting previously unselected package libcpanel-json-xs-perl:i386. Preparing to unpack .../35-libcpanel-json-xs-perl_4.37-1+b1_i386.deb ... Unpacking libcpanel-json-xs-perl:i386 (4.37-1+b1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../36-libdynaloader-functions-perl_0.003-3_all.deb ... Unpacking libdynaloader-functions-perl (0.003-3) ... Selecting previously unselected package libdevel-callchecker-perl:i386. Preparing to unpack .../37-libdevel-callchecker-perl_0.008-2+b1_i386.deb ... Unpacking libdevel-callchecker-perl:i386 (0.008-2+b1) ... Selecting previously unselected package libparams-classify-perl:i386. Preparing to unpack .../38-libparams-classify-perl_0.015-2+b2_i386.deb ... Unpacking libparams-classify-perl:i386 (0.015-2+b2) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../39-libmodule-runtime-perl_0.016-2_all.deb ... Unpacking libmodule-runtime-perl (0.016-2) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../40-libimport-into-perl_1.002005-2_all.deb ... Unpacking libimport-into-perl (1.002005-2) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../41-librole-tiny-perl_2.002004-1_all.deb ... Unpacking librole-tiny-perl (2.002004-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../42-libsub-quote-perl_2.006008-1_all.deb ... Unpacking libsub-quote-perl (2.006008-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../43-libmoo-perl_2.005005-1_all.deb ... Unpacking libmoo-perl (2.005005-1) ... Selecting previously unselected package libcucumber-tagexpressions-perl. Preparing to unpack .../44-libcucumber-tagexpressions-perl_6.1.0-1_all.deb ... Unpacking libcucumber-tagexpressions-perl (6.1.0-1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../45-libexporter-tiny-perl_1.006002-1_all.deb ... Unpacking libexporter-tiny-perl (1.006002-1) ... Selecting previously unselected package liblist-moreutils-xs-perl. Preparing to unpack .../46-liblist-moreutils-xs-perl_0.430-3+b2_i386.deb ... Unpacking liblist-moreutils-xs-perl (0.430-3+b2) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../47-liblist-moreutils-perl_0.430-2_all.deb ... Unpacking liblist-moreutils-perl (0.430-2) ... Selecting previously unselected package libstrictures-perl. Preparing to unpack .../48-libstrictures-perl_2.000006-1_all.deb ... Unpacking libstrictures-perl (2.000006-1) ... Selecting previously unselected package libdata-perl-perl. Preparing to unpack .../49-libdata-perl-perl_0.002011-2_all.deb ... Unpacking libdata-perl-perl (0.002011-2) ... Selecting previously unselected package libfile-copy-recursive-perl. Preparing to unpack .../50-libfile-copy-recursive-perl_0.45-4_all.deb ... Unpacking libfile-copy-recursive-perl (0.45-4) ... Selecting previously unselected package libnumber-compare-perl. Preparing to unpack .../51-libnumber-compare-perl_0.03-3_all.deb ... Unpacking libnumber-compare-perl (0.03-3) ... Selecting previously unselected package libtext-glob-perl. Preparing to unpack .../52-libtext-glob-perl_0.11-3_all.deb ... Unpacking libtext-glob-perl (0.11-3) ... Selecting previously unselected package libfile-find-rule-perl. Preparing to unpack .../53-libfile-find-rule-perl_0.34-3_all.deb ... Unpacking libfile-find-rule-perl (0.34-3) ... Selecting previously unselected package libio-stringy-perl. Preparing to unpack .../54-libio-stringy-perl_2.111-3_all.deb ... Unpacking libio-stringy-perl (2.111-3) ... Selecting previously unselected package libjson-maybexs-perl. Preparing to unpack .../55-libjson-maybexs-perl_1.004005-1_all.deb ... Unpacking libjson-maybexs-perl (1.004005-1) ... Selecting previously unselected package libmoox-handlesvia-perl. Preparing to unpack .../56-libmoox-handlesvia-perl_0.001009-2_all.deb ... Unpacking libmoox-handlesvia-perl (0.001009-2) ... Selecting previously unselected package libpath-class-perl. Preparing to unpack .../57-libpath-class-perl_0.37-4_all.deb ... Unpacking libpath-class-perl (0.37-4) ... Selecting previously unselected package libpath-tiny-perl. Preparing to unpack .../58-libpath-tiny-perl_0.144-1_all.deb ... Unpacking libpath-tiny-perl (0.144-1) ... Selecting previously unselected package libsub-uplevel-perl. Preparing to unpack .../59-libsub-uplevel-perl_0.2800-3_all.deb ... Unpacking libsub-uplevel-perl (0.2800-3) ... Selecting previously unselected package libterm-table-perl. Preparing to unpack .../60-libterm-table-perl_0.018-1_all.deb ... Unpacking libterm-table-perl (0.018-1) ... Selecting previously unselected package libtext-diff-perl. Preparing to unpack .../61-libtext-diff-perl_1.45-2_all.deb ... Unpacking libtext-diff-perl (1.45-2) ... Selecting previously unselected package libtest-differences-perl. Preparing to unpack .../62-libtest-differences-perl_0.71-1_all.deb ... Unpacking libtest-differences-perl (0.71-1) ... Selecting previously unselected package libtest-exception-perl. Preparing to unpack .../63-libtest-exception-perl_0.43-3_all.deb ... Unpacking libtest-exception-perl (0.43-3) ... Selecting previously unselected package libtest2-suite-perl. Preparing to unpack .../64-libtest2-suite-perl_0.000159-1_all.deb ... Unpacking libtest2-suite-perl (0.000159-1) ... Selecting previously unselected package libtype-tiny-perl. Preparing to unpack .../65-libtype-tiny-perl_2.004000-1_all.deb ... Unpacking libtype-tiny-perl (2.004000-1) ... Selecting previously unselected package libyaml-perl. Preparing to unpack .../66-libyaml-perl_1.31-1_all.deb ... Unpacking libyaml-perl (1.31-1) ... Setting up libpipeline1:i386 (1.5.7-2) ... Setting up libicu72:i386 (72.1-4+b1) ... Setting up libterm-table-perl (0.018-1) ... Setting up bsdextrautils (2.39.3-6) ... Setting up libdynaloader-functions-perl (0.003-3) ... Setting up libtext-glob-perl (0.11-3) ... Setting up libclass-method-modifiers-perl (2.15-1) ... Setting up libmagic-mgc (1:5.45-2+b1) ... Setting up libpath-class-perl (0.37-4) ... Setting up libalgorithm-diff-perl (1.201-1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libcpanel-json-xs-perl:i386 (4.37-1+b1) ... Setting up libio-stringy-perl (2.111-3) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1:i386 (1:5.45-2+b1) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-2+b1) ... Setting up libyaml-perl (1.31-1) ... Setting up libtest2-suite-perl (0.000159-1) ... Setting up libnumber-compare-perl (0.03-3) ... Setting up libfile-copy-recursive-perl (0.45-4) ... Setting up libjson-maybexs-perl (1.004005-1) ... Setting up autotools-dev (20220109.1) ... Setting up libtext-diff-perl (1.45-2) ... Setting up libfile-find-rule-perl (0.34-3) ... Setting up autopoint (0.21-14) ... Setting up libb-hooks-op-check-perl:i386 (0.22-2+b2) ... Setting up liblist-moreutils-xs-perl (0.430-3+b2) ... Setting up autoconf (2.71-3) ... Setting up libcapture-tiny-perl (0.48-2) ... Setting up sensible-utils (0.0.22) ... Setting up libpath-tiny-perl (0.144-1) ... Setting up libuchardet0:i386 (0.0.8-1+b1) ... Setting up librole-tiny-perl (2.002004-1) ... Setting up libsub-uplevel-perl (0.2800-3) ... Setting up libsub-override-perl (0.10-1) ... Setting up libstrictures-perl (2.000006-1) ... Setting up libsub-quote-perl (2.006008-1) ... Setting up libclass-xsaccessor-perl (1.19-4+b2) ... Setting up libexporter-tiny-perl (1.006002-1) ... Setting up libelf1:i386 (0.190-1+b1) ... Setting up libxml2:i386 (2.9.14+dfsg-1.3+b2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up liblist-moreutils-perl (0.430-2) ... Setting up libtype-tiny-perl (2.004000-1) ... Setting up libtest-differences-perl (0.71-1) ... Setting up libdevel-callchecker-perl:i386 (0.008-2+b1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libtest-exception-perl (0.43-3) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.23.0-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libparams-classify-perl:i386 (0.015-2+b2) ... Setting up man-db (2.12.0-3) ... Not building database; man-db/auto-update is not 'true'. Setting up libmodule-runtime-perl (0.016-2) ... Setting up libimport-into-perl (1.002005-2) ... Setting up libmoo-perl (2.005005-1) ... Setting up libdata-perl-perl (0.002011-2) ... Setting up debhelper (13.15.3) ... Setting up libmoox-handlesvia-perl (0.001009-2) ... Setting up libcucumber-tagexpressions-perl (6.1.0-1) ... Processing triggers for libc-bin (2.37-15) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/3044/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/3044/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libtest-bdd-cucumber-perl_0.86-1_source.changes dpkg-buildpackage: info: source package libtest-bdd-cucumber-perl dpkg-buildpackage: info: source version 0.86-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Étienne Mollier dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/reproducible-path/libtest-bdd-cucumber-perl-0.86=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/reproducible-path/libtest-bdd-cucumber-perl-0.86=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Warning: prerequisite Test::Pod 0 not found. WARNING: Older versions of ExtUtils::MakeMaker may errantly install README.pod as part of this distribution. It is recommended to avoid using this path in CPAN modules. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Test::BDD::Cucumber Writing MYMETA.yml and MYMETA.json dh_auto_build make -j21 make[1]: Entering directory '/build/reproducible-path/libtest-bdd-cucumber-perl-0.86' cp lib/Test/BDD/Cucumber/Model/TagSpec.pm blib/lib/Test/BDD/Cucumber/Model/TagSpec.pm cp lib/Test/BDD/Cucumber/Harness/TestBuilder.pm blib/lib/Test/BDD/Cucumber/Harness/TestBuilder.pm cp lib/Test/BDD/Cucumber/Model/Document.pm blib/lib/Test/BDD/Cucumber/Model/Document.pm cp lib/Test/BDD/Cucumber/Model/Result.pm blib/lib/Test/BDD/Cucumber/Model/Result.pm cp lib/Test/BDD/Cucumber/StepFile.pm blib/lib/Test/BDD/Cucumber/StepFile.pm cp lib/App/pherkin.pm blib/lib/App/pherkin.pm cp lib/Test/BDD/Cucumber/Errors.pm blib/lib/Test/BDD/Cucumber/Errors.pm cp lib/Test/BDD/Cucumber/Harness/TAP.pm blib/lib/Test/BDD/Cucumber/Harness/TAP.pm cp lib/Test/BDD/Cucumber/Harness/JSON.pm blib/lib/Test/BDD/Cucumber/Harness/JSON.pm cp lib/Test/BDD/Cucumber/Manual/Steps.pod blib/lib/Test/BDD/Cucumber/Manual/Steps.pod cp lib/Test/BDD/Cucumber/StepContext.pm blib/lib/Test/BDD/Cucumber/StepContext.pm cp lib/Test/BDD/Cucumber/I18n.pm blib/lib/Test/BDD/Cucumber/I18n.pm cp lib/Test/BDD/Cucumber/Parser.pm blib/lib/Test/BDD/Cucumber/Parser.pm cp lib/TAP/Parser/Iterator/PherkinStream.pm blib/lib/TAP/Parser/Iterator/PherkinStream.pm cp lib/Test/BDD/Cucumber/Model/Feature.pm blib/lib/Test/BDD/Cucumber/Model/Feature.pm cp lib/Test/BDD/Cucumber/Harness/TermColor.pm blib/lib/Test/BDD/Cucumber/Harness/TermColor.pm cp lib/Test/BDD/Cucumber/Model/Scenario.pm blib/lib/Test/BDD/Cucumber/Model/Scenario.pm cp lib/Test/BDD/Cucumber/Executor.pm blib/lib/Test/BDD/Cucumber/Executor.pm cp lib/Test/BDD/Cucumber/Harness.pm blib/lib/Test/BDD/Cucumber/Harness.pm cp lib/Test/BDD/Cucumber/Model/Dataset.pm blib/lib/Test/BDD/Cucumber/Model/Dataset.pm cp lib/Test/BDD/Cucumber/Manual/Integration.pod blib/lib/Test/BDD/Cucumber/Manual/Integration.pod cp lib/Test/BDD/Cucumber/Loader.pm blib/lib/Test/BDD/Cucumber/Loader.pm cp lib/Test/BDD/Cucumber/Harness/Data.pm blib/lib/Test/BDD/Cucumber/Harness/Data.pm cp lib/Test/BDD/Cucumber/Extension.pm blib/lib/Test/BDD/Cucumber/Extension.pm cp lib/Test/BDD/Cucumber/Model/Line.pm blib/lib/Test/BDD/Cucumber/Model/Line.pm cp lib/Test/BDD/Cucumber/Model/Step.pm blib/lib/Test/BDD/Cucumber/Model/Step.pm cp lib/Test/BDD/Cucumber/I18N/Data.pm blib/lib/Test/BDD/Cucumber/I18N/Data.pm cp lib/TAP/Parser/SourceHandler/Feature.pm blib/lib/TAP/Parser/SourceHandler/Feature.pm cp lib/Test/BDD/Cucumber.pm blib/lib/Test/BDD/Cucumber.pm cp lib/Test/BDD/Cucumber/Manual/Tutorial.pod blib/lib/Test/BDD/Cucumber/Manual/Tutorial.pod cp lib/Test/BDD/Cucumber/Manual/Architecture.pod blib/lib/Test/BDD/Cucumber/Manual/Architecture.pod cp lib/Test/BDD/Cucumber/Util.pm blib/lib/Test/BDD/Cucumber/Util.pm cp bin/pherkin blib/script/pherkin "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pherkin Manifying 1 pod document Manifying 27 pod documents Manifying 5 pod documents make[1]: Leaving directory '/build/reproducible-path/libtest-bdd-cucumber-perl-0.86' dh_auto_test make -j21 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libtest-bdd-cucumber-perl-0.86' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/210_background_sections.t ....................... ok 1 - Five scenarios found ok 2 - Scenario 1 passes ok 3 - Scenario 2 passes ok 4 - Scenario 3 fails ok 5 - Scenario 4 passes ok 6 - Four steps found ok 7 - Step 1 passes ok 8 - Step 2 fails ok 9 - Step 3 pending ok 10 - Step 4 pending 1..10 ok t/220_tag_parsing.t ............................... # Feature with background section ok 1 - Found two scenarios ok 2 - Tags match for Test Feature ok 3 - Tags match for Two tags ok 4 - Tags match for One tag # Feature without background section ok 5 - Found two scenarios ok 6 - Tags match for Test Feature ok 7 - Tags match for Two tags ok 8 - Tags match for One tag 1..8 ok t/230_tag_matching.t .............................. ok 1 - Matched scenario: Lifers and Fakers ok 2 - Matched scenario: Lifeless inner ok 3 - Matched scenario: Home or Red, Inner ok 4 - Matched scenario: Home or Not Red, Inner 1..4 ok t/240_localized_features.t ........................ ok 1 - 'feature in language 'es' can be parsed' isa 'Test::BDD::Cucumber::Model::Feature' ok 2 - feature language ok 3 - 'feature in language 'en' can be parsed' isa 'Test::BDD::Cucumber::Model::Feature' ok 4 - feature language 1..4 ok t/250_i18n_json.t ................................. ok 1 - languages can be retrieved 1..1 ok t/260_match_matcher.t ............................. ok 1 - Simple example ok 2 - Non-capture ok 3 - Nested-capture ok 4 - Multi-group 1..4 ok t/270_scenario_outlines.t ......................... ok 1 - A parsing error was caught ok 2 - Error is about outline scenario ok 3 - Error identifies correct start line ok 4 - Two examples correctly parsed ok 5 - table value defined ok 6 - expectation defined ok 7 - escaped table value equals string value ok 8 - table value defined ok 9 - expectation defined ok 10 - escaped table value equals string value ok 11 - table value defined ok 12 - expected value equals table value ok 13 - table value defined ok 14 - expected value equals table value 1..14 ok t/310_auto_corpus.t ............................... ok 1 - t/auto_corpus/calculator.feature_corpus matches ok 2 - t/auto_corpus/digest.feature_corpus matches 1..2 ok t/400_app_pherkin_harnesses.t ..................... ok 1 - use App::pherkin; ok 2 - 'Loaded harness by name: [Data] -> [Test::BDD::Cucumber::Harness::Data]' isa 'Test::BDD::Cucumber::Harness' ok 3 - It is set to app->harness [Data] ok 4 - 'Loaded harness by name: [Test::BDD::Cucumber::Harness::TermColor] -> [Test::BDD::Cucumber::Harness::TermColor]' isa 'Test::BDD::Cucumber::Harness' ok 5 - It is set to app->harness [Test::BDD::Cucumber::Harness::TermColor] ok 6 - 'Loaded harness by name: [Test::BDD::Cucumber::Harness::TAP] -> [Test::BDD::Cucumber::Harness::TAP]' isa 'Test::BDD::Cucumber::Harness' ok 7 - It is set to app->harness [Test::BDD::Cucumber::Harness::TAP] ok 8 - 'Loaded harness by name: [Test::BDD::Cucumber::Harness::JSON] -> [Test::BDD::Cucumber::Harness::JSON]' isa 'Test::BDD::Cucumber::Harness' ok 9 - It is set to app->harness [Test::BDD::Cucumber::Harness::JSON] ok 10 - 'Loaded harness by name: [Test::BDD::Cucumber::Harness::JSON( json_args => { utf8 => 1, pretty => 0 } )] -> [Test::BDD::Cucumber::Harness::JSON]' isa 'Test::BDD::Cucumber::Harness' ok 11 - It is set to app->harness [Test::BDD::Cucumber::Harness::JSON( json_args => { utf8 => 1, pretty => 0 } )] 1..11 ok t/500_error_formatter.t ........................... ok 1 - Offset 0 works ok 2 - Offset 1 works ok 3 - Offset 2 works ok 4 - Offset 4 works ok 5 - Offset 10 works ok 6 - Offset 12 works ok 7 - Offset 13 works ok 8 - Offset 14 works ok 9 - Error example matches 1..9 ok t/600_harness_json_output.t ....................... ok 1 - json file contains list of features ok 2 - number of features matches ok 3 - Feature names match ok 4 - feature contains only valid keys ok 5 - feature keyword ok 6 - feature name ok 7 - feature id matches a line in examples/tagged-digest/features/basic.feature ok 8 - Feature ID is stable ok 9 - feature uri ok 10 - line number in .feature file ok 11 - feature description ok 12 - feature tags ok 13 - feature has list of scenarios ok 14 - Feature elements names match ok 15 - scenario contains only valid keys ok 16 - scenario keyword ok 17 - scenario name ok 18 - scenario id matches a line in examples/tagged-digest/features/basic.feature ok 19 - Scenario ID is stable ok 20 - scenario line ok 21 - scenario description ok 22 - scenario tags ok 23 - scenario has list of steps ok 24 - Scenatio steps names match ok 25 - success step contains only valid keys ok 26 - step keyword ok 27 - step name ok 28 - step line number ok 29 - step has result ok 30 - success step result status ok 31 - duration in result ok 32 ok 33 ok 34 - failed result status ok 35 - failed error message ok 36 ok 37 ok 38 - passed after failed within outline ok 39 ok 40 ok 41 - pending result status ok 42 - pending(TODO) error message ok 43 ok 44 ok 45 - missed result status ok 46 - missed error message 1..46 ok t/710_configuration_profiles.t .................... ok 1 - _find_config_file passes filename through ok 2 - _find_config_file checks $ENV{'PHERKIN_CONFIG'} ok 3 - Loading top_level_array.yaml / default caught ok 4 - Loading readable.yaml / arrayref caught ok 5 - Loading readable.yaml / hashoption caught ok 6 - Loading readable.yaml / missing caught ok 7 - Loading not_yaml.yaml / default caught ok 8 - readable/readable read OK ok 9 - readable/[default] read OK ok 10 - Replacements performed OK ok 11 - Empty configuration passed through ok 12 - 'Harness set' isa 'Test::BDD::Cucumber::Harness::Data' ok 13 - Step paths set ok 14 - Cmdline extension 1 ok 15 - Cmdline extension 2 ok 16 - Config extension 3 1..16 ok t/720_extension_tests.t ........................... ok 1 - Two extensions added ok 2 - Simple example: hooks called the expected number of times ok 3 - Ordered example: pre_feature in right order ok 4 - Ordered example: post_feature in right order ok 5 - Ordered example: pre_scenario in right order ok 6 - Ordered example: post_scenario in right order ok 7 - Ordered example: pre_step in right order ok 8 - Ordered example: post_step in right order 1..8 ok t/800_regressions_010_too_few_features.t .......... ok 1 - Scenario found ok 2 - Scenario name matches: Check MD5 ok 3 - Scenario found ok 4 - Scenario name matches: Check SHA-1 ok 5 - Scenario found ok 6 - Scenario name matches: MD5 longer data ok 7 - Background section exists 1..7 ok t/800_regressions_020_term_color_skipped_steps.t .. ok 1 - Skipped tests handled appropriately 1..1 ok t/800_regressions_030_pherkin_external_libs.t ..... 1..5 ok 1 - -l adds lib ok 2 - -b adds blib/lib and blib/arch ok 3 - -l -lb adds lib, blib/lib and blib/arch ok 4 - -I accepts multiple arguments ok 5 - -I and -l work together ok t/900_run_cucumber_tests.t ........................ # Feature Simple tests of Digest.pm # As a developer planning to use Digest.pm I want to test the basic functionality of Digest.pm In order to have confidence in it # Scenario Check MD5 ok 1 - Given a usable "Digest" class # ok 2 - Given a Digest MD5 object # ok 3 - When I've added "foo bar baz" to the object # ok 4 - And I've added "bat ban shan" to the object # ok 5 - Then the hex output is "bcb56b3dd4674d5d7459c95e4c8a41d5" # ok 6 - Then the base64 output is "1B2M2Y8AsgTpgAmY7PhCfg" # # Scenario Check SHA-1 ok 7 - Given a usable "Digest" class # ok 8 - Given a Digest SHA-1 object # ok 9 - When I've added "foo" to the object # ok 10 - Then the hex output is "0beec7b5ea3f0fdbc95d0dd47f3c5bc275da8a33" # # Scenario Check SHA-1 ok 11 - Given a usable "Digest" class # ok 12 - Given a Digest SHA-1 object # ok 13 - When I've added "bar" to the object # ok 14 - Then the hex output is "62cdb7020ff920e5aa642c3d4066950dd1f01f4d" # # Scenario Check SHA-1 ok 15 - Given a usable "Digest" class # ok 16 - Given a Digest SHA-1 object # ok 17 - When I've added "baz" to the object # ok 18 - Then the hex output is "bbe960a25ea311d21d40669e93df2003ba9b90a2" # # Scenario MD5 longer data ok 19 - Given a usable "Digest" class # ok 20 - Given a Digest MD5 object # ok 21 - When I've added the following to the object # """Here is a chunk of text that works a bit like a HereDoc. We'll split # off indenting space from the lines in it up to the indentation of the # first """""" ok 22 - Then the hex output is "75ad9f578e43b863590fae52d5d19ce6" # # Feature Simple tests of Digest.pm # As a developer planning to use Digest.pm I want to test the basic functionality of Digest.pm In order to have confidence in it # Scenario Check MD5 ok 23 - Given a usable "Digest" class # ok 24 - Given a Digest MD5 object # ok 25 - When I've added "foo bar baz" to the object # ok 26 - And I've added "bat ban shan" to the object # ok 27 - Then the hex output is "bcb56b3dd4674d5d7459c95e4c8a41d5" # ok 28 - Then the base64 output is "1B2M2Y8AsgTpgAmY7PhCfg" # # Scenario Check SHA-1 ok 29 - Given a usable "Digest" class # ok 30 - Given a Digest SHA-1 object # ok 31 - When I've added "foo" to the object # ok 32 - Then the hex output is "0beec7b5ea3f0fdbc95d0dd47f3c5bc275da8a33" # # Scenario Check SHA-1 ok 33 - Given a usable "Digest" class # ok 34 - Given a Digest SHA-1 object # ok 35 - When I've added "bar" to the object # ok 36 - Then the hex output is "62cdb7020ff920e5aa642c3d4066950dd1f01f4d" # # Scenario Check SHA-1 ok 37 - Given a usable "Digest" class # ok 38 - Given a Digest SHA-1 object # ok 39 - When I've added "baz" to the object # ok 40 - Then the hex output is "bbe960a25ea311d21d40669e93df2003ba9b90a2" # # Scenario MD5 longer data ok 41 - Given a usable "Digest" class # ok 42 - Given a Digest MD5 object # ok 43 - When I've added the following to the object # """Here is a chunk of text that works a bit like a HereDoc. We'll split # off indenting space from the lines in it up to the indentation of the # first """""" ok 44 - Then the hex output is "75ad9f578e43b863590fae52d5d19ce6" # # Característica Prueba simple de Digest.pm # Como dearrollador planeo usar Digest.pm Deseo probar la funcionalidad de Digest.pm Para estar seguro de que funciona de forma correcta # Escenario Verificar MD5 ok 45 - Dada la clase "Digest" # ok 46 - Dado un objeto Digest usando el algoritmo "MD5" # ok 47 - Cuando he agregado "prueba" al objeto # ok 48 - Entonces el resultado en hexadecimal es "c893bad68927b457dbed39460e6afd62" # ok 49 - Cuando he agregado "prueba" al objeto # ok 50 - Y he agregado "texto" al objeto # ok 51 - Entonces el resultado en hexadecimal es "faea2ea80591327766b7c9ce591f9460" # ok 52 - Entonces el resultado en base64 es "1B2M2Y8AsgTpgAmY7PhCfg" # # Escenario Check SHA-1 ok 53 - Dada la clase "Digest" # ok 54 - Dado un objeto Digest usando el algoritmo "SHA-1" # ok 55 - Cuando he agregado "test" al objeto # ok 56 - Entonces el resultado en hexadecimal es "a94a8fe5ccb19ba61c4c0873d391e987982fbbd3" # # Escenario Check SHA-1 ok 57 - Dada la clase "Digest" # ok 58 - Dado un objeto Digest usando el algoritmo "SHA-1" # ok 59 - Cuando he agregado "devs" al objeto # ok 60 - Entonces el resultado en hexadecimal es "99b48da825c239c6ecd0a54ebfc11552d7ffb56f" # # Escenario Check SHA-1 ok 61 - Dada la clase "Digest" # ok 62 - Dado un objeto Digest usando el algoritmo "SHA-1" # ok 63 - Cuando he agregado "nogo" al objeto # ok 64 - Entonces el resultado en hexadecimal es "c42910ed3f073231e88fef0b710648684fc0ed28" # # Escenario MD5 de datos mas largos ok 65 - Dada la clase "Digest" # ok 66 - Dado un objeto Digest usando el algoritmo "MD5" # ok 67 - Cuando he agregado los siguientes datos al objeto # """ Esta es una prueba del funcionamiento de Test::BDD::Cucumber.""" ok 68 - Entonces el resultado hexadecimal es "00c6fff240d73810685d9b4885018a5d" # # Funktionalität Grundlegende Taschenrechnerfunktionen # Um sicherzustellen, dass ich die Calculator-Klasse korrekt programmiert habe, möchte ich als Entwickler einige grundlegende Funktionen prüfen, damit ich beruhigt meine Calculator-Klasse verwenden kann. # Szenario Anzeige des ersten Tastendrucks ok 69 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 70 - Wenn ich 1 gedrückt habe # ok 71 - Dann ist auf der Anzeige 1 zu sehen # # Szenario Anzeige mehrerer Tastendrücke ok 72 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 73 - Wenn ich 1 und 2 und 3 und . und 5 und 0 gedrückt habe # ok 74 - Dann ist auf der Anzeige 123.50 zu sehen # # Szenario Taste "C" löscht die Anzeige ok 75 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 76 - Wenn ich 1 und 2 und 3 gedrückt habe # ok 77 - Wenn ich C gedrückt habe # ok 78 - Dann ist auf der Anzeige 0 zu sehen # # Szenario Addition während des Rechnens ok 79 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 80 - Wenn ich 1 und 2 und 3 und + und 4 und 5 und 6 und + gedrückt habe # ok 81 - Dann ist auf der Anzeige 579 zu sehen # # Szenario Grundlegende Berechnungen ok 82 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 83 - Wenn die Tasten 5.0 gedrückt wurden # ok 84 - Und die Tasten + gedrückt wurden # ok 85 - Und die Tasten 5.0 gedrückt wurden # ok 86 - Und ich = gedrückt habe # ok 87 - Dann ist auf der Anzeige 10 zu sehen # # Szenario Grundlegende Berechnungen ok 88 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 89 - Wenn die Tasten 6 gedrückt wurden # ok 90 - Und die Tasten / gedrückt wurden # ok 91 - Und die Tasten 3 gedrückt wurden # ok 92 - Und ich = gedrückt habe # ok 93 - Dann ist auf der Anzeige 2 zu sehen # # Szenario Grundlegende Berechnungen ok 94 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 95 - Wenn die Tasten 10 gedrückt wurden # ok 96 - Und die Tasten * gedrückt wurden # ok 97 - Und die Tasten 7.550 gedrückt wurden # ok 98 - Und ich = gedrückt habe # ok 99 - Dann ist auf der Anzeige 75.5 zu sehen # # Szenario Grundlegende Berechnungen ok 100 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 101 - Wenn die Tasten 3 gedrückt wurden # ok 102 - Und die Tasten - gedrückt wurden # ok 103 - Und die Tasten 10 gedrückt wurden # ok 104 - Und ich = gedrückt habe # ok 105 - Dann ist auf der Anzeige -7 zu sehen # # Szenario Trennung von Berechnungen ok 106 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 107 - Wenn ich erfolgreich folgende Rechnungen durchgeführt habe # | first | operator | second | result | # | 0.5 | + | 0.1 | 0.6 | # | 0.01 | / | 0.01 | 1 | # | 10 | * | 1 | 10 | ok 108 - Und ich 3 gedrückt habe # ok 109 - Dann ist auf der Anzeige 3 zu sehen # # Szenario Ticker Tape ok 110 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 111 - Wenn ich folgende Zeichenfolge eingegeben habe # """1 + 2 + 3 + 4 + 5 + 6 - # 100 # * 13 === + 2 =""" ok 112 - Dann ist auf der Anzeige -1025 zu sehen # # Szenario Zahlen als Text eingeben ok 113 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 114 - Wenn die Tasten __THE_NUMBER_FIVE__ gedrückt wurden # ok 115 - Dann ist auf der Anzeige 5 zu sehen # # Szenario Zahlen als Text eingeben ok 116 - Gegeben sei ein neues Objekt der Klasse Calculator # ok 117 - Wenn ich folgende Zahlen addiert habe # | number as word | # | __THE_NUMBER_FOUR__ | # | __THE_NUMBER_FIVE__ | # | __THE_NUMBER_ONE__ | ok 118 - Dann ist auf der Anzeige __THE_NUMBER_TEN__ zu sehen # # Feature Basic Calculator Functions # In order to check I've written the Calculator class correctly As a developer I want to check some basic operations So that I can have confidence in my Calculator class. # Scenario The default Display is 0 ok 119 - Given a new Calculator object # ok 120 - Then the display should show 0 # # Scenario First Key Press on the Display ok 121 - Given a new Calculator object # ok 122 - And having pressed 1 # ok 123 - Then the display should show 1 # # Scenario Several Key Presses on the Display ok 124 - Given a new Calculator object # ok 125 - And having pressed 1 and 2 and 3 and . and 5 and 0 # ok 126 - Then the display should show 123.50 # # Scenario Pressing Clear Wipes the Display ok 127 - Given a new Calculator object # ok 128 - And having pressed 1 and 2 and 3 # ok 129 - And having pressed C # ok 130 - Then the display should show 0 # # Scenario Type expression but don't execute it ok 131 - Given a new Calculator object # ok 132 - And having pressed 1 and 2 and 3 and + # ok 133 - Then the display should show 123 # # Scenario Type expression but don't execute it ok 134 - Given a new Calculator object # ok 135 - And having pressed 1 and 2 and 3 and + and 4 and 5 and 6 # ok 136 - Then the display should show 456 # # Scenario Add as you go ok 137 - Given a new Calculator object # ok 138 - And having pressed 1 and 2 and 3 and + and 4 and 5 and 6 and + # ok 139 - Then the display should show 579 # # Scenario Really basic calculation ok 140 - Given a new Calculator object # ok 141 - And having keyed 1+1= # ok 142 - Then the display should show 2 # # Scenario After calculation pressin new key will replace result ok 143 - Given a new Calculator object # ok 144 - And having keyed 1+1= # ok 145 - And having pressed 3 # ok 146 - Then the display should show 3 # # Scenario Basic arithmetic in one long input line ok 147 - Given a new Calculator object # ok 148 - And having keyed 5.0+5.0 # ok 149 - And having pressed = # ok 150 - Then the display should show 10 # # Scenario Basic arithmetic in one long input line ok 151 - Given a new Calculator object # ok 152 - And having keyed 6 / 3 # ok 153 - And having pressed = # ok 154 - Then the display should show 2 # # Scenario Basic arithmetic in one long input line ok 155 - Given a new Calculator object # ok 156 - And having keyed 1 0 * 7 . 5 5 0 # ok 157 - And having pressed = # ok 158 - Then the display should show 75.5 # # Scenario Basic arithmetic in one long input line ok 159 - Given a new Calculator object # ok 160 - And having keyed 3 - 10 # ok 161 - And having pressed = # ok 162 - Then the display should show -7 # # Scenario Basic arithmetic ok 163 - Given a new Calculator object # ok 164 - And having keyed 5.0 # ok 165 - And having keyed + # ok 166 - And having keyed 5.0 # ok 167 - And having pressed = # ok 168 - Then the display should show 10 # # Scenario Basic arithmetic ok 169 - Given a new Calculator object # ok 170 - And having keyed 6 # ok 171 - And having keyed / # ok 172 - And having keyed 3 # ok 173 - And having pressed = # ok 174 - Then the display should show 2 # # Scenario Basic arithmetic ok 175 - Given a new Calculator object # ok 176 - And having keyed 10 # ok 177 - And having keyed * # ok 178 - And having keyed 7.550 # ok 179 - And having pressed = # ok 180 - Then the display should show 75.5 # # Scenario Basic arithmetic ok 181 - Given a new Calculator object # ok 182 - And having keyed 3 # ok 183 - And having keyed - # ok 184 - And having keyed 10 # ok 185 - And having pressed = # ok 186 - Then the display should show -7 # # Scenario Separation of calculations ok 187 - Given a new Calculator object # ok 188 - And having successfully performed the following calculations # | first | operator | second | result | # | 0.5 | + | 0.1 | 0.6 | # | 0.01 | / | 0.01 | 1 | # | 10 | * | 1 | 10 | ok 189 - And having pressed 3 # ok 190 - Then the display should show 3 # # Scenario Ticker Tape ok 191 - Given a new Calculator object # ok 192 - And having entered the following sequence # """1 + 2 + 3 + 4 + 5 + 6 - # 100 # * 13 === + 2 =""" ok 193 - Then the display should show -1025 # # Scenario Enter number using text ok 194 - Given a new Calculator object # ok 195 - And having keyed __THE_NUMBER_FIVE__ # ok 196 - Then the display should show 5 # # Scenario Enter numbers using text ok 197 - Given a new Calculator object # ok 198 - And having added these numbers # | number as word | # | __THE_NUMBER_FOUR__ | # | __THE_NUMBER_FIVE__ | # | __THE_NUMBER_ONE__ | ok 199 - Then the display should show 10 # ok 200 - And the display should show __THE_NUMBER_TEN__ # # Feature Core: Scenarios, Steps, Mappings # Cucumber is a tool for executing business-readable specifications written in Gherkin. The basic unit of both specification and execution is the Scenario. A Scenario is a list of steps, each of which representing an action performed by a user (or user agent) on the software product under development. When a Scenario is executed, its steps are applied to the software system in the order they are contained in the Scenario. Gherkin is not a programming language, so in order to execute steps written in it, Cucumber must first look up a mapping from the text of each step to a function. If such a mapping exists, the function is executed, and the result is communicated to the user. # Scenario All steps passing means the scenario passes ok 201 - Given a scenario with: # """When I add 4 and 5 # Then the result is 9""" ok 202 - And the step "I add 4 and 5" has a passing mapping # ok 203 - And the step "the result is 9" has a passing mapping # ok 204 - When Cucumber executes the scenario # ok 205 - Then the scenario passes # # Scenario Failing step means the scenario fails ok 206 - Given a scenario with: # """When I add 4 and 5 # Then the result is 9""" ok 207 - And the step "I add 4 and 5" has a failing mapping # ok 208 - And the step "the result is 9" has a passing mapping # ok 209 - When Cucumber executes the scenario # ok 210 - Then the scenario fails # ok 211 - And the step "the result is 9" is skipped # # Scenario Pending step means the scenario is pending ok 212 - Given a scenario with: # """When I add 4 and 5 # Then the result is 9""" ok 213 - And the step "I add 4 and 5" has a pending mapping # ok 214 - And the step "the result is 9" has a passing mapping # ok 215 - When Cucumber executes the scenario # ok 216 - Then the scenario is pending # ok 217 - And the step "the result is 9" is skipped # # Scenario Missing step mapping means the scenario is undefined ok 218 - Given a scenario with: # """When I add 4 and 5 # Then the result is 9""" ok 219 - And the step "the result is 9" has a passing mapping # ok 220 - When Cucumber executes the scenario # ok 221 - Then the scenario is undefined # ok 222 - And the step "the result is 9" is skipped # # Scenario Feature headers ok 223 - Given the following feature: # """Feature: a feature # In order to get results # As a user # I want to do something""" ok 224 - When Cucumber runs the feature # ok 225 - Then the feature passes # # Scenario Simple flat steps ok 226 - Given a scenario with: # """Given a calculator # When the calculator computes PI # Then the calculator returns PI""" ok 227 - When Cucumber runs the scenario with steps for a calculator # ok 228 - Then the scenario passes # # Scenario Given, When, Then, And and But steps ok 229 - Given a scenario with: # """Given a calculator # When the calculator adds up 1 and 2 # And the calculator adds up 3 and 0.14159265 # Then the calculator returns PI # But the calculator does not return 3""" ok 230 - When Cucumber runs the scenario with steps for a calculator # ok 231 - Then the scenario passes # # Scenario Failing steps ok 232 - Given a scenario with: # """Given a calculator # When the calculator adds up 3 and 0.14 # Then the calculator returns PI""" ok 233 - When Cucumber runs the scenario with steps for a calculator # ok 234 - Then the scenario fails # # Scenario Single-parameter step ok 235 - Given a scenario with: # """Given a calculator # When the calculator computes PI # Then the calculator returns "3.14159265"""" ok 236 - When Cucumber runs the scenario with steps for a calculator # ok 237 - Then the scenario passes # # Scenario Two-parameter step ok 238 - Given a scenario with: # """Given a calculator # When the calculator adds up "12" and "51" # Then the calculator returns "63"""" ok 239 - When Cucumber runs the scenario with steps for a calculator # ok 240 - Then the scenario passes # # Scenario Two-parameter step failing ok 241 - Given a scenario with: # """Given a calculator # When the calculator adds up "12" and "51" # Then the calculator returns "65"""" ok 242 - When Cucumber runs the scenario with steps for a calculator # ok 243 - Then the scenario fails # # Scenario Three-parameter step ok 244 - Given a scenario with: # """Given a calculator # When the calculator adds up "3", "4" and "5" # Then the calculator returns "12"""" ok 245 - When Cucumber runs the scenario with steps for a calculator # ok 246 - Then the scenario passes # # Feature Tags # Scenario execute scenarios matching a tag # # cucumber --tags @foo ok 247 - Given a scenario tagged with "@foo" # ok 248 - And a scenario tagged with "@bar" # ok 249 - When Cucumber executes scenarios tagged with "@foo" # ok 250 - Then only the first scenario is executed # # Scenario execute scenarios not matching a tag # # cucumber --tags ~@bar ok 251 - Given a scenario tagged with "@foo" # ok 252 - And a scenario tagged with "@bar" # ok 253 - When Cucumber executes scenarios not tagged with "@bar" # ok 254 - Then only the first scenario is executed # # Scenario execute scenarios matching any of several tags (OR) # # cucumber --tags @foo,@bar ok 255 - Given a scenario tagged with "@bar" # ok 256 - And a scenario tagged with "@foo" # ok 257 - And a scenario tagged with "@baz" # ok 258 - When Cucumber executes scenarios tagged with "@foo" or "@bar" # ok 259 - Then only the first two scenarios are executed # # Scenario execute scenarios matching several tags (AND) # # cucumber --tags @foo --tags @bar ok 260 - Given a scenario tagged with "@foo" and "@bar" # ok 261 - And a scenario tagged with "@foo" # ok 262 - When Cucumber executes scenarios tagged with both "@foo" and "@bar" # ok 263 - Then only the first scenario is executed # # Scenario execute scenarios not matching any tag (NOT OR NOT) # # cucumber --tags ~@foo --tags ~@bar ok 264 - Given a scenario tagged with "@foo" and "@bar" # ok 265 - And a scenario tagged with "@bar" # ok 266 - And a scenario tagged with "@baz" # ok 267 - And a scenario tagged with "@foo" # ok 268 - When Cucumber executes scenarios not tagged with "@foo" nor "@bar" # ok 269 - Then only the third scenario is executed # # Scenario exclude scenarios matching two tags (NOT AND NOT) # # cucumber --tags ~@foo,~@bar ok 270 - Given a scenario tagged with "@foo" and "@bar" # ok 271 - And a scenario tagged with "@bar" # ok 272 - And a scenario tagged with "@baz" # ok 273 - And a scenario tagged with "@foo" # ok 274 - When Cucumber executes scenarios not tagged with both "@foo" and "@bar" # ok 275 - Then only the second, third and fourth scenarios are executed # # Scenario with tag or without other tag # # cucumber --tags @foo,~@bar ok 276 - Given a scenario tagged with "@foo" and "@bar" # ok 277 - And a scenario tagged with "@baz" # ok 278 - And a scenario tagged with "@bar" # ok 279 - When Cucumber executes scenarios tagged with "@foo" or without "@bar" # ok 280 - Then only the first two scenarios are executed # # Scenario with tag but without two other tags # # cucumber --tags @baz --tags ~@foo --tags ~@bar ok 281 - Given a scenario tagged with "@foo" and "@bar" # ok 282 - And a scenario tagged with "@foo", "@bar" and "@baz" # ok 283 - And a scenario tagged with "@baz" # ok 284 - When Cucumber executes scenarios tagged with "@baz" but not with both "@foo" and "@bar" # ok 285 - Then only the third scenario is executed # # Scenario execute scenario with tagged feature ok 286 - Given a feature tagged with "@foo" # ok 287 - And a scenario without any tags # ok 288 - When Cucumber executes scenarios tagged with "@foo" # ok 289 - Then the scenario is executed # # Feature Multiple Scenarios # As a developer using Test::BDD::Cucumber, I want to ensure that I can use multiple Scenarios in a Feature. # Scenario First test ok 290 - Given a Digest MD5 object # ok 291 - When I add "foo" to the object # ok 292 - And I add "bar" to the object # ok 293 - Then the results look like # | method | output | # | hexdigest | 3858f62230ac3c915f300c664312c63f | # | b64digest | 1B2M2Y8AsgTpgAmY7PhCfg | # Scenario Last step with multiline string ok 294 - Given a Digest MD5 object # ok 295 - When I add "foo" to the object # ok 296 - And I add "bar" to the object # ok 297 - Then the hexdigest looks like: # """3858f62230ac3c915f300c664312c63f""" ok 298 - And the b64digest looks like: # """1B2M2Y8AsgTpgAmY7PhCfg""" # Scenario First test all over again ok 299 - Given a Digest MD5 object # ok 300 - When I add "foo" to the object # ok 301 - And I add "bar" to the object # ok 302 - Then the results look like # | method | output | # | hexdigest | 3858f62230ac3c915f300c664312c63f | # | b64digest | 1B2M2Y8AsgTpgAmY7PhCfg | 1..302 ok t/901_examples.t .................................. # Subtest: examples Feature: Basic Calculator Functions In order to check I've written the Calculator class correctly As a developer I want to check some basic operations So that I can have confidence in my Calculator class. Scenario: The default Display is 0 Given a new Calculator object Then the display should show 0 Scenario: First Key Press on the Display Given a new Calculator object And having pressed 1 Then the display should show 1 Scenario: Several Key Presses on the Display Given a new Calculator object And having pressed 1 and 2 and 3 and . and 5 and 0 Then the display should show 123.50 Scenario: Pressing Clear Wipes the Display Given a new Calculator object And having pressed 1 and 2 and 3 And having pressed C Then the display should show 0 Scenario: Type expression but don't execute it Given a new Calculator object And having pressed 1 and 2 and 3 and + Then the display should show 123 Scenario: Type expression but don't execute it Given a new Calculator object And having pressed 1 and 2 and 3 and + and 4 and 5 and 6 Then the display should show 456 Scenario: Add as you go Given a new Calculator object And having pressed 1 and 2 and 3 and + and 4 and 5 and 6 and + Then the display should show 579 Scenario: Really basic calculation Given a new Calculator object And having keyed 1+1= Then the display should show 2 Scenario: After calculation pressin new key will replace result Given a new Calculator object And having keyed 1+1= And having pressed 3 Then the display should show 3 Scenario: Basic arithmetic in one long input line Given a new Calculator object And having keyed 5.0+5.0 And having pressed = Then the display should show 10 Scenario: Basic arithmetic in one long input line Given a new Calculator object And having keyed 6 / 3 And having pressed = Then the display should show 2 Scenario: Basic arithmetic in one long input line Given a new Calculator object And having keyed 1 0 * 7 . 5 5 0 And having pressed = Then the display should show 75.5 Scenario: Basic arithmetic in one long input line Given a new Calculator object And having keyed 3 - 10 And having pressed = Then the display should show -7 Scenario: Basic arithmetic Given a new Calculator object And having keyed 5.0 And having keyed + And having keyed 5.0 And having pressed = Then the display should show 10 Scenario: Basic arithmetic Given a new Calculator object And having keyed 6 And having keyed / And having keyed 3 And having pressed = Then the display should show 2 Scenario: Basic arithmetic Given a new Calculator object And having keyed 10 And having keyed * And having keyed 7.550 And having pressed = Then the display should show 75.5 Scenario: Basic arithmetic Given a new Calculator object And having keyed 3 And having keyed - And having keyed 10 And having pressed = Then the display should show -7 Scenario: Separation of calculations Given a new Calculator object And having successfully performed the following calculations | first | operator | second | result | | 0.5 | + | 0.1 | 0.6 | | 0.01 | / | 0.01 | 1 | | 10 | * | 1 | 10 | And having pressed 3 Then the display should show 3 Scenario: Ticker Tape Given a new Calculator object And having entered the following sequence """ 1 + 2 + 3 + 4 + 5 + 6 - 100 * 13 === + 2 = """ Then the display should show -1025 Scenario: Enter number using text Given a new Calculator object And having keyed __THE_NUMBER_FIVE__ Then the display should show 5 Scenario: Enter numbers using text Given a new Calculator object And having added these numbers | number as word | | __THE_NUMBER_FOUR__ | | __THE_NUMBER_FIVE__ | | __THE_NUMBER_ONE__ | Then the display should show 10 And the display should show __THE_NUMBER_TEN__ ok 1 - exit code of examples/calculator Feature: Simple tests of Digest.pm As a developer planning to use Digest.pm I want to test the basic functionality of Digest.pm In order to have confidence in it Scenario: Check MD5 Given a usable "Digest" class Given a Digest MD5 object When I've added "foo bar baz" to the object And I've added "bat ban shan" to the object Then the hex output is "bcb56b3dd4674d5d7459c95e4c8a41d5" Then the base64 output is "1B2M2Y8AsgTpgAmY7PhCfg" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "foo" to the object Then the hex output is "0beec7b5ea3f0fdbc95d0dd47f3c5bc275da8a33" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "bar" to the object Then the hex output is "62cdb7020ff920e5aa642c3d4066950dd1f01f4d" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "baz" to the object Then the hex output is "bbe960a25ea311d21d40669e93df2003ba9b90a2" Scenario: MD5 longer data Given a usable "Digest" class Given a Digest MD5 object When I've added the following to the object """ Here is a chunk of text that works a bit like a HereDoc. We'll split off indenting space from the lines in it up to the indentation of the first """ """ Then the hex output is "75ad9f578e43b863590fae52d5d19ce6" ok 2 - exit code of examples/digest Funktionalität: Grundlegende Taschenrechnerfunktionen Um sicherzustellen, dass ich die Calculator-Klasse korrekt programmiert habe, möchte ich als Entwickler einige grundlegende Funktionen prüfen, damit ich beruhigt meine Calculator-Klasse verwenden kann. Szenario: Anzeige des ersten Tastendrucks Gegeben sei ein neues Objekt der Klasse Calculator Wenn ich 1 gedrückt habe Dann ist auf der Anzeige 1 zu sehen Szenario: Anzeige mehrerer Tastendrücke Gegeben sei ein neues Objekt der Klasse Calculator Wenn ich 1 und 2 und 3 und . und 5 und 0 gedrückt habe Dann ist auf der Anzeige 123.50 zu sehen Szenario: Taste "C" löscht die Anzeige Gegeben sei ein neues Objekt der Klasse Calculator Wenn ich 1 und 2 und 3 gedrückt habe Wenn ich C gedrückt habe Dann ist auf der Anzeige 0 zu sehen Szenario: Addition während des Rechnens Gegeben sei ein neues Objekt der Klasse Calculator Wenn ich 1 und 2 und 3 und + und 4 und 5 und 6 und + gedrückt habe Dann ist auf der Anzeige 579 zu sehen Szenario: Grundlegende Berechnungen Gegeben sei ein neues Objekt der Klasse Calculator Wenn die Tasten 5.0 gedrückt wurden Und die Tasten + gedrückt wurden Und die Tasten 5.0 gedrückt wurden Und ich = gedrückt habe Dann ist auf der Anzeige 10 zu sehen Szenario: Grundlegende Berechnungen Gegeben sei ein neues Objekt der Klasse Calculator Wenn die Tasten 6 gedrückt wurden Und die Tasten / gedrückt wurden Und die Tasten 3 gedrückt wurden Und ich = gedrückt habe Dann ist auf der Anzeige 2 zu sehen Szenario: Grundlegende Berechnungen Gegeben sei ein neues Objekt der Klasse Calculator Wenn die Tasten 10 gedrückt wurden Und die Tasten * gedrückt wurden Und die Tasten 7.550 gedrückt wurden Und ich = gedrückt habe Dann ist auf der Anzeige 75.5 zu sehen Szenario: Grundlegende Berechnungen Gegeben sei ein neues Objekt der Klasse Calculator Wenn die Tasten 3 gedrückt wurden Und die Tasten - gedrückt wurden Und die Tasten 10 gedrückt wurden Und ich = gedrückt habe Dann ist auf der Anzeige -7 zu sehen Szenario: Trennung von Berechnungen Gegeben sei ein neues Objekt der Klasse Calculator Wenn ich erfolgreich folgende Rechnungen durchgeführt habe | first | operator | second | result | | 0.5 | + | 0.1 | 0.6 | | 0.01 | / | 0.01 | 1 | | 10 | * | 1 | 10 | Und ich 3 gedrückt habe Dann ist auf der Anzeige 3 zu sehen Szenario: Ticker Tape Gegeben sei ein neues Objekt der Klasse Calculator Wenn ich folgende Zeichenfolge eingegeben habe """ 1 + 2 + 3 + 4 + 5 + 6 - 100 * 13 === + 2 = """ Dann ist auf der Anzeige -1025 zu sehen Szenario: Zahlen als Text eingeben Gegeben sei ein neues Objekt der Klasse Calculator Wenn die Tasten __THE_NUMBER_FIVE__ gedrückt wurden Dann ist auf der Anzeige 5 zu sehen Szenario: Zahlen als Text eingeben Gegeben sei ein neues Objekt der Klasse Calculator Wenn ich folgende Zahlen addiert habe | number as word | | __THE_NUMBER_FOUR__ | | __THE_NUMBER_FIVE__ | | __THE_NUMBER_ONE__ | Dann ist auf der Anzeige __THE_NUMBER_TEN__ zu sehen ok 3 - exit code of examples/i18n_de Característica: Prueba simple de Digest.pm Como dearrollador planeo usar Digest.pm Deseo probar la funcionalidad de Digest.pm Para estar seguro de que funciona de forma correcta Escenario: Verificar MD5 Dada la clase "Digest" Dado un objeto Digest usando el algoritmo "MD5" Cuando he agregado "prueba" al objeto Entonces el resultado en hexadecimal es "c893bad68927b457dbed39460e6afd62" Cuando he agregado "prueba" al objeto Y he agregado "texto" al objeto Entonces el resultado en hexadecimal es "faea2ea80591327766b7c9ce591f9460" Entonces el resultado en base64 es "1B2M2Y8AsgTpgAmY7PhCfg" Escenario: Check SHA-1 Dada la clase "Digest" Dado un objeto Digest usando el algoritmo "SHA-1" Cuando he agregado "test" al objeto Entonces el resultado en hexadecimal es "a94a8fe5ccb19ba61c4c0873d391e987982fbbd3" Escenario: Check SHA-1 Dada la clase "Digest" Dado un objeto Digest usando el algoritmo "SHA-1" Cuando he agregado "devs" al objeto Entonces el resultado en hexadecimal es "99b48da825c239c6ecd0a54ebfc11552d7ffb56f" Escenario: Check SHA-1 Dada la clase "Digest" Dado un objeto Digest usando el algoritmo "SHA-1" Cuando he agregado "nogo" al objeto Entonces el resultado en hexadecimal es "c42910ed3f073231e88fef0b710648684fc0ed28" Escenario: MD5 de datos mas largos Dada la clase "Digest" Dado un objeto Digest usando el algoritmo "MD5" Cuando he agregado los siguientes datos al objeto """ Esta es una prueba del funcionamiento de Test::BDD::Cucumber. """ Entonces el resultado hexadecimal es "00c6fff240d73810685d9b4885018a5d" ok 4 - exit code of examples/i18n_es Feature: Simple tests of Digest.pm As a developer planning to use Digest.pm I want to test the basic functionality of Digest.pm In order to have confidence in it Scenario: Check MD5 Given a usable "Digest" class Given a Digest MD5 object When I've added "foo bar baz" to the object And I've added "bat ban shan" to the object Then the hex output is "bcb56b3dd4674d5d7459c95e4c8a41d5" Then the base64 output is "1B2M2Y8AsgTpgAmY7PhCfg" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "foo" to the object Then the hex output is "0beec7b5ea3f0fdbc95d0dd47f3c5bc275da8a33" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "bar" to the object Then the hex output is "62cdb7020ff920e5aa642c3d4066950dd1f01f4d" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "baz" to the object Then the hex output is "bbe960a25ea311d21d40669e93df2003ba9b90a2" Scenario: MD5 longer data Given a usable "Digest" class Given a Digest MD5 object When I've added the following to the object """ Here is a chunk of text that works a bit like a HereDoc. We'll split off indenting space from the lines in it up to the indentation of the first """ """ Then the hex output is "75ad9f578e43b863590fae52d5d19ce6" ok 5 - exit code of examples/tagged-digest 1..5 ok 1 - examples # Subtest: exit_code_incorrect_test_case Feature: Simple tests of Digest.pm As a developer planning to use Digest.pm I want to test the basic functionality of Digest.pm In order to have confidence in it Scenario: Check MD5 Given a usable "Digest" class Given a Digest MD5 object When I've added "foo bar baz" to the object And I've added "bat ban shan" to the object Then the hex output is "bcb56b3dd4674d5d7459c95e4c8a41d5" Then the base64 output is "1B2M2Y8AsgTpgAmY7PhCfg" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "foo" to the object Then the hex output is "0beec7b5ea3f0fdbc95d0dd47f3c5bc275da8a33" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "bar" to the object Then the hex output is "62cdb7020ff920e5aa642c3d4066950dd1f01f4d" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "baz" to the object Then the hex output is "bbe960a25ea311d21d40669e93df2003ba9b90a2" Scenario: MD5 longer data Given a usable "Digest" class Given a Digest MD5 object When I've added the following to the object """ Here is a chunk of text that works a bit like a HereDoc. We'll split off indenting space from the lines in it up to the indentation of the first """ """ Then the hex output is "75ad9f578e43b863590fae52d5d19ce6" ok 1 - exit code of broken Digest example Feature: Simple tests of Digest.pm As a developer planning to use Digest.pm I want to test the basic functionality of Digest.pm In order to have confidence in it Scenario: Check MD5 Given a usable "Digest" class Given a Digest MD5 object When I have added "foo bar baz" to the object And I've added "bat ban shan" to the object Then the hex output is "bcb56b3dd4674d5d7459c95e4c8a41d5" Then the base64 output is "1B2M2Y8AsgTpgAmY7PhCfg" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "foo" to the object Then the hex output is "0beec7b5ea3f0fdbc95d0dd47f3c5bc275da8a33" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "bar" to the object Then the hex output is "62cdb7020ff920e5aa642c3d4066950dd1f01f4d" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "baz" to the object Then the hex output is "bbe960a25ea311d21d40669e93df2003ba9b90a2" Scenario: MD5 longer data Given a usable "Digest" class Given a Digest MD5 object When I've added the following to the object """ Here is a chunk of text that works a bit like a HereDoc. We'll split off indenting space from the lines in it up to the indentation of the first """ """ Then the hex output is "75ad9f578e43b863590fae52d5d19ce6" ok 2 - exit code of broken Digest example Feature: Simple tests of Digest.pm As a developer planning to use Digest.pm I want to test the basic functionality of Digest.pm In order to have confidence in it Scenario: Check MD5 Given a usable "Digest" class Given a Digest MD5 object When I have added "foo bar baz" to the object And I've added "bat ban shan" to the object Then the hex output is "bcb56b3dd4674d5d7459c95e4c8a41d5" Then the base64 output is "1B2M2Y8AsgTpgAmY7PhCfg" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "foo" to the object Then the hex output is "0beec7b5ea3f0fdbc95d0dd47f3c5bc275da8a33" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "bar" to the object Then the hex output is "62cdb7020ff920e5aa642c3d4066950dd1f01f4d" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "baz" to the object Then the hex output is "bbe960a25ea311d21d40669e93df2003ba9b90a2" Scenario: MD5 longer data Given a usable "Digest" class Given a Digest MD5 object When I've added the following to the object """ Here is a chunk of text that works a bit like a HereDoc. We'll split off indenting space from the lines in it up to the indentation of the first """ """ Then the hex output is "75ad9f578e43b863590fae52d5d19ce6" ok 3 - exit code of broken Digest example 1..3 ok 2 - exit_code_incorrect_test_case # Subtest: exit_code_for_bad_results Feature: Simple tests of Digest.pm As a developer planning to use Digest.pm I want to test the basic functionality of Digest.pm In order to have confidence in it Scenario: Check MD5 Given a usable "Digest" class Given a Digest MD5 object When I've added "foo bar baz" to the object And I've added "bat ban shan" to the object Then the hex output is "bcb56b3dd4674d5d7459c95e4c8a41d5" Then the base64 output is "1B2M2Y8AsgTpgAmY7PhCfg" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "foo" to the object Then the hex output is "0beec7b5ea3f0fdbc95d0dd47f3c5bc275da8a33" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "bar" to the object Then the hex output is "62cdb7020ff920e5aa642c3d4066950dd1f01f4d" Scenario: Check SHA-1 Given a usable "Digest" class Given a Digest SHA-1 object When I've added "baz" to the object Then the hex output is "bbe960a25ea311d21d40669e93df2003ba9b90a2" Scenario: MD5 longer data Given a usable "Digest" class Given a Digest MD5 object When I've added the following to the object """ Here is a chunk of text that works a bit like a HereDoc. We'll split off indenting space from the lines in it up to the indentation of the first """ """ Then the hex output is "somethingelse" step defined at /tmp/fsBH4PVT6U/features/basic.feature line 35. not ok # Failed test at /tmp/fsBH4PVT6U/features/step_definitions/basic_steps.pl line 34. # got: '75ad9f578e43b863590fae52d5d19ce6' # expected: 'somethingelse' ok 3 - Step ran to completion 1..2 # Looks like you failed 1 test of 2. ok 1 - exit code of broken Digest example 1..1 ok 3 - exit_code_for_bad_results 1..3 ok t/910_run_tests_pherkin.t ......................... # Subtest: Run pherkin in match-only mode # Feature Match-only testing # As a test developer I want to be able to assert that all steps in my feature are matched without being required to run the entire test suite (and spend the associated amount of time waiting). As a solution to this problem, Pherkin offers the ability to run through all steps in features matching the steps without executing the step functions. # Scenario Test match only function ok 1 - MATCH MODE: Given a step with step function that calls die() # ok 2 - MATCH MODE: When there are further steps with associated step functions # ok 3 - MATCH MODE: Then I expect all steps to be matched # 1..3 ok 1 - Run pherkin in match-only mode 1..1 ok t/920_run_tagged_tests_pherkin.t .................. ok 1 - Have JSON output ok 2 ok 3 ok 4 ok 5 ok 6 - Have JSON output ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 - Have JSON output ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 - Have JSON output ok 21 ok 22 ok 23 ok 24 1..24 ok t/author-pod-syntax.t ............................. skipped: these tests are for testing by the author t/test_utf8_test_name.t ........................... # Seeded srand with seed '20250523' from local date. ok 1 - utf8 strings are ok in test name 1..1 ok All tests successful. Files=22, Tests=481, 9 wallclock secs ( 0.18 usr 0.04 sys + 8.72 cusr 0.60 csys = 9.54 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libtest-bdd-cucumber-perl-0.86' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libtest-bdd-cucumber-perl/ make -j21 install DESTDIR=/build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libtest-bdd-cucumber-perl-0.86' Manifying 1 pod document Manifying 27 pod documents Manifying 5 pod documents Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/StepFile.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/StepContext.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Executor.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Extension.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Errors.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/I18n.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Harness.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Util.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Parser.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Loader.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/I18N/Data.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Model/Dataset.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Model/Result.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Model/Document.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Model/Step.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Model/Line.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Model/Feature.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Model/TagSpec.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Model/Scenario.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Manual/Architecture.pod Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Manual/Tutorial.pod Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Manual/Steps.pod Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Manual/Integration.pod Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Harness/JSON.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Harness/TermColor.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Harness/TAP.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Harness/Data.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/Test/BDD/Cucumber/Harness/TestBuilder.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/TAP/Parser/SourceHandler/Feature.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/TAP/Parser/Iterator/PherkinStream.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/perl5/App/pherkin.pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man1/pherkin.1p Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::I18N::Data.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Extension.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Executor.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::StepContext.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Harness::TestBuilder.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Model::Document.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Model::Dataset.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Model::Step.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Manual::Steps.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Harness::TermColor.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Model::Result.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Model::Feature.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::I18n.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Model::Scenario.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Harness::JSON.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Harness::TAP.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/TAP::Parser::Iterator::PherkinStream.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Manual::Tutorial.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Manual::Integration.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Harness::Data.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Model::TagSpec.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/App::pherkin.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Harness.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Parser.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Model::Line.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::StepFile.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Manual::Architecture.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Errors.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Util.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/Test::BDD::Cucumber::Loader.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/man/man3/TAP::Parser::SourceHandler::Feature.3pm Installing /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/bin/pherkin make[1]: Leaving directory '/build/reproducible-path/libtest-bdd-cucumber-perl-0.86' dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/libtest-bdd-cucumber-perl-0.86' dh_installexamples find /build/reproducible-path/libtest-bdd-cucumber-perl-0.86/debian/libtest-bdd-cucumber-perl/usr/share/doc/libtest-bdd-cucumber-perl/examples -type f -print0 | \ xargs -r0 sed -i -e '1s|^#!perl|#!/usr/bin/perl|' make[1]: Leaving directory '/build/reproducible-path/libtest-bdd-cucumber-perl-0.86' dh_installman dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libtest-bdd-cucumber-perl' in '../libtest-bdd-cucumber-perl_0.86-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libtest-bdd-cucumber-perl_0.86-1_i386.buildinfo dpkg-genchanges --build=binary -O../libtest-bdd-cucumber-perl_0.86-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/3044/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/3044/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3044 and its subdirectories I: Current time: Fri May 23 21:10:24 +14 2025 I: pbuilder-time-stamp: 1747984224