I: pbuilder: network access will be disabled during build I: Current time: Thu Apr 16 01:40:40 -12 2020 I: pbuilder-time-stamp: 1587044440 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [siege_4.0.4-1.dsc] I: copying [./siege_4.0.4.orig.tar.gz] I: copying [./siege_4.0.4-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Oct 28 06:29:36 2017 -12 gpgv: using RSA key C0E392999AF37A47ED034B5B57D6C2F425C19BE5 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./siege_4.0.4-1.dsc dpkg-source: info: extracting siege in siege-4.0.4 dpkg-source: info: unpacking siege_4.0.4.orig.tar.gz dpkg-source: info: unpacking siege_4.0.4-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying bombardment.in-typo.diff dpkg-source: info: applying set_verbose_to_false.diff dpkg-source: info: applying update_doc_about_log_file.diff dpkg-source: info: applying siege.1.in.diff I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), libssl-dev (>= 0.9.8), autotools-dev (>= 20100122.1), zlib1g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libssl-dev (>= 0.9.8); however: Package libssl-dev is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev (>= 20100122.1); however: Package autotools-dev is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libssl-dev{a} libssl1.1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 22.9 MB of archives. After unpacking 81.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 10 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 11 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 12 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 13 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 14 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 24 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 25 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 26 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6 [8443 kB] Get: 27 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 28 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 29 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 30 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 31 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main i386 libssl1.1 i386 1.1.1d-0+deb10u2 [1538 kB] Get: 35 http://deb.debian.org/debian buster/main i386 libssl-dev i386 1.1.1d-0+deb10u2 [1826 kB] Get: 36 http://deb.debian.org/debian buster/main i386 zlib1g-dev i386 1:1.2.11.dfsg-1 [216 kB] Fetched 22.9 MB in 1s (16.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../02-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../04-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../11-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../22-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../25-libicu63_63.1-6_i386.deb ... Unpacking libicu63:i386 (63.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../27-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libssl1.1:i386. Preparing to unpack .../33-libssl1.1_1.1.1d-0+deb10u2_i386.deb ... Unpacking libssl1.1:i386 (1.1.1d-0+deb10u2) ... Selecting previously unselected package libssl-dev:i386. Preparing to unpack .../34-libssl-dev_1.1.1d-0+deb10u2_i386.deb ... Unpacking libssl-dev:i386 (1.1.1d-0+deb10u2) ... Selecting previously unselected package zlib1g-dev:i386. Preparing to unpack .../35-zlib1g-dev_1%3a1.2.11.dfsg-1_i386.deb ... Unpacking zlib1g-dev:i386 (1:1.2.11.dfsg-1) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libssl1.1:i386 (1.1.1d-0+deb10u2) ... Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:i386 (63.1-6) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up libssl-dev:i386 (1.1.1d-0+deb10u2) ... Setting up autopoint (0.19.8.1-9) ... Setting up zlib1g-dev:i386 (1:1.2.11.dfsg-1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:i386 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/siege-4.0.4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package siege dpkg-buildpackage: info: source version 4.0.4-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Josue Abarca dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean --with autotools_dev dh: The autotools-dev sequence is deprecated and replaced by dh in debhelper (>= 9.20160115) dh: This feature will be removed in compat 12. dh_autotools-dev_restoreconfig dh_autotools-dev_restoreconfig: dh_autotools-dev_restoreconfig is deprecated; please see dh_autotools-dev_restoreconfig(1) for a replacement dh_autotools-dev_restoreconfig: This feature will be removed in compat 12. dh_clean debian/rules build dh build --with autotools_dev dh: The autotools-dev sequence is deprecated and replaced by dh in debhelper (>= 9.20160115) dh: This feature will be removed in compat 12. dh_update_autotools_config dh_autotools-dev_updateconfig dh_autotools-dev_updateconfig: dh_autotools-dev_updateconfig is deprecated; please see dh_autotools-dev_updateconfig(1) for a replacement dh_autotools-dev_updateconfig: This feature will be removed in compat 12. debian/rules override_dh_auto_configure make[1]: Entering directory '/build/siege-4.0.4' dh_auto_configure -- --sysconfdir=/etc/siege --localstatedir=/var/log ./configure --build=i686-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu --libexecdir=\${prefix}/lib/i386-linux-gnu --disable-maintainer-mode --disable-dependency-tracking --sysconfdir=/etc/siege --localstatedir=/var/log configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... none checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) none checking for a sed that does not truncate output... /bin/sed checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgfortran... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for perl... /usr/bin/perl checking for a POSIX-compliant shell... /bin/sh checking whether make sets $(MAKE)... (cached) yes checking for buggy pthread mutex initializers... no checking for dlopen() in -ldld... no checking for dlopen() in -ldl... yes checking for random device... yes checking for ssl support... yes checking /include/openssl/opensslv.h usability... no checking /include/openssl/opensslv.h presence... no checking for /include/openssl/opensslv.h... no checking /usr/include/openssl/opensslv.h usability... yes checking /usr/include/openssl/opensslv.h presence... yes checking for /usr/include/openssl/opensslv.h... yes checking for OpenSSL version... >= 0.9.8 (appropriate flag set) checking for zlib support... yes checking /include/zlib.h usability... no checking /include/zlib.h presence... no checking for /include/zlib.h... no checking /usr/include/zlib.h usability... yes checking /usr/include/zlib.h presence... yes checking for /usr/include/zlib.h... yes checking for ZLIB version... checking for inline... inline checking for int8_t... yes checking for int16_t... yes checking for int32_t... yes checking for int64_t... yes checking for uint8_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for u_int32_t... yes checking for ssize_t... yes checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for unistd.h... (cached) yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for sys/types.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/times.h usability... yes checking sys/times.h presence... yes checking for sys/times.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking sched.h usability... yes checking sched.h presence... yes checking for sched.h... yes checking openssl/e_os.h usability... no checking openssl/e_os.h presence... no checking for openssl/e_os.h... no checking openssl/e_os2.h usability... yes checking openssl/e_os2.h presence... yes checking for openssl/e_os2.h... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking return type of signal handlers... void checking for working alloca.h... yes checking for alloca... yes checking for strchr... yes checking for memcpy... yes checking for strncpy... yes checking for strstr... yes checking for strlen... yes checking for strncasecmp... yes checking for strncmp... yes checking for socket... yes checking for gethostbyname... yes checking for snprintf... yes checking for strdup... yes checking for rand_r... yes checking for localtime_r... yes checking for gethostbyname_r... yes checking for gmtime_r... yes checking for getipnodebyname... no checking for freehostent... no checking for getopt_long... yes checking for poll... yes checking for socket in -lsocket... no checking for pthread_attr_init in -lpthread... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating doc/Makefile config.status: creating html/Makefile config.status: creating include/Makefile config.status: creating include/joedog/Makefile config.status: creating utils/Makefile config.status: creating include/config.h config.status: executing depfiles commands config.status: executing default-1 commands config.status: executing default-2 commands config.status: executing default-3 commands config.status: executing default-4 commands config.status: executing default-5 commands config.status: executing default-6 commands configure: WARNING: unrecognized options: --disable-silent-rules, --disable-maintainer-mode -------------------------------------------------------- Configuration is complete Run the following commands to complete the installation: make make install For complete documentation: http://www.joedog.org -------------------------------------------------------- make[1]: Leaving directory '/build/siege-4.0.4' dh_auto_build make -j1 make[1]: Entering directory '/build/siege-4.0.4' Making all in . make[2]: Entering directory '/build/siege-4.0.4' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/siege-4.0.4' Making all in include make[2]: Entering directory '/build/siege-4.0.4/include' make all-recursive make[3]: Entering directory '/build/siege-4.0.4/include' Making all in joedog make[4]: Entering directory '/build/siege-4.0.4/include/joedog' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/siege-4.0.4/include/joedog' make[4]: Entering directory '/build/siege-4.0.4/include' make[4]: Leaving directory '/build/siege-4.0.4/include' make[3]: Leaving directory '/build/siege-4.0.4/include' make[2]: Leaving directory '/build/siege-4.0.4/include' Making all in src make[2]: Entering directory '/build/siege-4.0.4/src' gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c array.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c auth.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c base64.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c browser.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c cache.c cache.c: In function 'cache_get_header': cache.c:211:11: warning: statement will never be executed [-Wswitch-unreachable] char *ptr = NULL; ^~~ gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c cookie.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c cookies.c cookies.c: In function '__save_cookies': cookies.c:381:32: warning: format '%ld' expects argument of type 'long int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Wformat=] snprintf(line, len, "%ld | %s\n", cur->threadID, cookie_to_string(tmp)); ~~^ ~~~~~~~~~~~~~ %d cookies.c: In function 'cookies_header': cookies.c:225:5: warning: 'strncpy' output truncated before terminating nul copying 8 bytes from a string of the same length [-Wstringop-truncation] strncpy(newton, "Cookie: ", 8); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cookies.c:227:5: warning: 'strncat' specified bound 2 equals source length [-Wstringop-overflow=] strncat(newton, "\015\012", 2); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cookies.c:226:5: warning: 'strncat' output may be truncated copying 4096 bytes from a string of length 81919 [-Wstringop-truncation] strncat(newton, oreo, MAX_COOKIE_SIZE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c cfg.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c creds.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c crew.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c data.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c date.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c eval.c eval.c: In function 'evaluate': eval.c:84:3: warning: 'strncpy' specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(result, final, strlen(final)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c ftp.c In function '__response_code', inlined from '__response' at ftp.c:300:12: ftp.c:317:3: warning: 'strncpy' output may be truncated copying 3 bytes from a string of length 1023 [-Wstringop-truncation] strncpy(code, buf, 3); ^~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c getopt.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c getopt1.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c handler.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c hash.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c http.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c init.c init.c: In function 'load_conf': init.c:521:9: warning: 'strncpy' specified bound 256 equals destination size [-Wstringop-truncation] strncpy(my.encoding, value, sizeof(my.encoding)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ init.c:511:7: warning: 'strncpy' specified bound 256 equals destination size [-Wstringop-truncation] strncpy(my.uagent, value, sizeof(my.uagent)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ init.c:505:7: warning: 'strncpy' specified bound 128 equals destination size [-Wstringop-truncation] strncpy(my.file, value, sizeof(my.file)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ init.c:426:7: warning: 'strncpy' specified bound 128 equals destination size [-Wstringop-truncation] strncpy(my.logfile, value, sizeof(my.logfile)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c load.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c log.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c main.c main.c: In function 'display_version': main.c:107:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] strncpy(name, program_name, strlen(program_name)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ main.c: In function 'parse_cmdline': main.c:244:11: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] strncpy(my.logfile, optarg, strlen(optarg)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ main.c:271:9: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] strncpy(my.file, optarg, strlen(optarg)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c md5.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c memory.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c notify.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c page.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c parser.c In function '__parse_control', inlined from 'html_parser' at parser.c:83:9: parser.c:228:13: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] strncpy(buf, ptr, strlen(ptr)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c perl.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c response.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c sock.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c ssl.c ssl.c: In function 'SSL_thread_cleanup': ssl.c:225:3: warning: 'ERR_remove_state' is deprecated [-Wdeprecated-declarations] ERR_remove_state(0); ^~~~~~~~~~~~~~~~ In file included from /usr/include/openssl/e_os2.h:13, from /usr/include/openssl/ssl.h:15, from ./sock.h:46, from ./ssl.h:30, from ssl.c:42: /usr/include/openssl/err.h:261:1: note: declared here DEPRECATEDIN_1_0_0(void ERR_remove_state(unsigned long pid)) ^~~~~~~~~~~~~~~~~~ ssl.c:232:4: warning: 'ERR_remove_thread_state' is deprecated [-Wdeprecated-declarations] ERR_remove_thread_state(NULL); ^~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/openssl/e_os2.h:13, from /usr/include/openssl/ssl.h:15, from ./sock.h:46, from ./ssl.h:30, from ssl.c:42: /usr/include/openssl/err.h:260:1: note: declared here DEPRECATEDIN_1_1_0(void ERR_remove_thread_state(void *)) ^~~~~~~~~~~~~~~~~~ At top level: ssl.c:237:1: warning: 'SSL_pthreads_locking_callback' defined but not used [-Wunused-function] SSL_pthreads_locking_callback(int mode, int type, char *file, int line) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c stralloc.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c timer.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c url.c url.c: In function '__url_set_absolute': url.c:665:5: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation] strncpy(scheme, "http", 4); ^~~~~~~~~~~~~~~~~~~~~~~~~~ url.c:669:5: warning: 'strncpy' output truncated before terminating nul copying 5 bytes from a string of the same length [-Wstringop-truncation] strncpy(scheme, "https", 5); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ url.c:673:5: warning: 'strncpy' output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation] strncpy(scheme, "ftp", 3); ^~~~~~~~~~~~~~~~~~~~~~~~~ url.c:678:5: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation] strncpy(scheme, "http", 4); ^~~~~~~~~~~~~~~~~~~~~~~~~~ url.c: In function '__url_replace.constprop': url.c:1263:3: warning: 'strncpy' specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(url, buf, strlen(buf)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c util.c gcc -DHAVE_CONFIG_H -I. -I../include -I/include/zlib -I/include -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -c version.c /bin/sh ../libtool --tag=CC --mode=link gcc -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -L/usr/lib -L/usr/lib -lpthread -Wl,-z,relro -Wl,-z,now -o siege array.o auth.o base64.o browser.o cache.o cookie.o cookies.o cfg.o creds.o crew.o data.o date.o eval.o ftp.o getopt.o getopt1.o handler.o hash.o http.o init.o load.o log.o main.o md5.o memory.o notify.o page.o parser.o perl.o response.o sock.o ssl.o stralloc.o timer.o url.o util.o version.o -ldl -lssl -lcrypto -lz mkdir .libs gcc -I/usr/include/openssl -I/usr/include -I/include/zlib -I/include -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -W -Wall -Wunused-value -DOPENSSL_NO_KRB5 -g -O2 -ffile-prefix-map=/build/siege-4.0.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -o siege array.o auth.o base64.o browser.o cache.o cookie.o cookies.o cfg.o creds.o crew.o data.o date.o eval.o ftp.o getopt.o getopt1.o handler.o hash.o http.o init.o load.o log.o main.o md5.o memory.o notify.o page.o parser.o perl.o response.o sock.o ssl.o stralloc.o timer.o url.o util.o version.o -L/usr/lib -lpthread -ldl -lssl -lcrypto -lz make[2]: Leaving directory '/build/siege-4.0.4/src' Making all in utils make[2]: Entering directory '/build/siege-4.0.4/utils' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/siege-4.0.4/utils' Making all in doc make[2]: Entering directory '/build/siege-4.0.4/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/siege-4.0.4/doc' Making all in html make[2]: Entering directory '/build/siege-4.0.4/html' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/siege-4.0.4/html' make[1]: Leaving directory '/build/siege-4.0.4' dh_auto_test make -j1 check VERBOSE=1 make[1]: Entering directory '/build/siege-4.0.4' Making check in . make[2]: Entering directory '/build/siege-4.0.4' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/build/siege-4.0.4' Making check in include make[2]: Entering directory '/build/siege-4.0.4/include' Making check in joedog make[3]: Entering directory '/build/siege-4.0.4/include/joedog' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/siege-4.0.4/include/joedog' make[3]: Entering directory '/build/siege-4.0.4/include' make[3]: Leaving directory '/build/siege-4.0.4/include' make[2]: Leaving directory '/build/siege-4.0.4/include' Making check in src make[2]: Entering directory '/build/siege-4.0.4/src' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/siege-4.0.4/src' Making check in utils make[2]: Entering directory '/build/siege-4.0.4/utils' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/siege-4.0.4/utils' Making check in doc make[2]: Entering directory '/build/siege-4.0.4/doc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/siege-4.0.4/doc' Making check in html make[2]: Entering directory '/build/siege-4.0.4/html' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/siege-4.0.4/html' make[1]: Leaving directory '/build/siege-4.0.4' fakeroot debian/rules binary dh binary --with autotools_dev dh: The autotools-dev sequence is deprecated and replaced by dh in debhelper (>= 9.20160115) dh: This feature will be removed in compat 12. dh_testroot dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory '/build/siege-4.0.4' dh_auto_install make -j1 install DESTDIR=/build/siege-4.0.4/debian/siege AM_UPDATE_INFO_DIR=no make[2]: Entering directory '/build/siege-4.0.4' Making install in . make[3]: Entering directory '/build/siege-4.0.4' make[4]: Entering directory '/build/siege-4.0.4' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/siege-4.0.4' make[3]: Leaving directory '/build/siege-4.0.4' Making install in include make[3]: Entering directory '/build/siege-4.0.4/include' Making install in joedog make[4]: Entering directory '/build/siege-4.0.4/include/joedog' make[5]: Entering directory '/build/siege-4.0.4/include/joedog' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/siege-4.0.4/include/joedog' make[4]: Leaving directory '/build/siege-4.0.4/include/joedog' make[4]: Entering directory '/build/siege-4.0.4/include' make[5]: Entering directory '/build/siege-4.0.4/include' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/siege-4.0.4/include' make[4]: Leaving directory '/build/siege-4.0.4/include' make[3]: Leaving directory '/build/siege-4.0.4/include' Making install in src make[3]: Entering directory '/build/siege-4.0.4/src' make[4]: Entering directory '/build/siege-4.0.4/src' /bin/mkdir -p '/build/siege-4.0.4/debian/siege/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c siege '/build/siege-4.0.4/debian/siege/usr/bin' /usr/bin/install -c siege /build/siege-4.0.4/debian/siege/usr/bin/siege make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/siege-4.0.4/src' make[3]: Leaving directory '/build/siege-4.0.4/src' Making install in utils make[3]: Entering directory '/build/siege-4.0.4/utils' make[4]: Entering directory '/build/siege-4.0.4/utils' make install-exec-hook make[5]: Entering directory '/build/siege-4.0.4/utils' /bin/sh ../utils/mkinstalldirs /build/siege-4.0.4/debian/siege/usr/bin /bin/sh ../libtool --mode=install /usr/bin/install -c bombardment /build/siege-4.0.4/debian/siege/usr/bin/bombardment /usr/bin/install -c bombardment /build/siege-4.0.4/debian/siege/usr/bin/bombardment /bin/sh ../libtool --mode=install /usr/bin/install -c siege2csv.pl /build/siege-4.0.4/debian/siege/usr/bin/siege2csv.pl /usr/bin/install -c siege2csv.pl /build/siege-4.0.4/debian/siege/usr/bin/siege2csv.pl /bin/sh ../libtool --mode=install /usr/bin/install -c siege.config /build/siege-4.0.4/debian/siege/usr/bin/siege.config /usr/bin/install -c siege.config /build/siege-4.0.4/debian/siege/usr/bin/siege.config make[5]: Leaving directory '/build/siege-4.0.4/utils' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/siege-4.0.4/utils' make[3]: Leaving directory '/build/siege-4.0.4/utils' Making install in doc make[3]: Entering directory '/build/siege-4.0.4/doc' make[4]: Entering directory '/build/siege-4.0.4/doc' make install-exec-hook make[5]: Entering directory '/build/siege-4.0.4/doc' make[5]: Leaving directory '/build/siege-4.0.4/doc' /bin/mkdir -p '/build/siege-4.0.4/debian/siege/usr/share/man/man1' /usr/bin/install -c -m 644 siege.1 siege.config.1 bombardment.1 siege2csv.1 '/build/siege-4.0.4/debian/siege/usr/share/man/man1' make[4]: Leaving directory '/build/siege-4.0.4/doc' make[3]: Leaving directory '/build/siege-4.0.4/doc' Making install in html make[3]: Entering directory '/build/siege-4.0.4/html' make[4]: Entering directory '/build/siege-4.0.4/html' make install-exec-hook make[5]: Entering directory '/build/siege-4.0.4/html' HTML pages not installed make[5]: Leaving directory '/build/siege-4.0.4/html' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/siege-4.0.4/html' make[3]: Leaving directory '/build/siege-4.0.4/html' make[2]: Leaving directory '/build/siege-4.0.4' # Do not use language-specific extension (policy). mv /build/siege-4.0.4/debian/siege/usr/bin/siege2csv.pl /build/siege-4.0.4/debian/siege/usr/bin/siege2csv make[1]: Leaving directory '/build/siege-4.0.4' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/siege/usr/bin/siege was not linked against libdl.so.2 (it uses none of the library's symbols) dh_installdeb dh_gencontrol dpkg-gencontrol: warning: package siege: substitution variable ${perl:Depends} unused, but is defined dpkg-gencontrol: warning: package siege: substitution variable ${perl:Depends} unused, but is defined dh_md5sums dh_builddeb dpkg-deb: building package 'siege-dbgsym' in '../siege-dbgsym_4.0.4-1_i386.deb'. dpkg-deb: building package 'siege' in '../siege_4.0.4-1_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../siege_4.0.4-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/17931 and its subdirectories I: Current time: Thu Apr 16 01:43:57 -12 2020 I: pbuilder-time-stamp: 1587044637