I: pbuilder: network access will be disabled during build I: Current time: Thu Mar 26 17:38:25 -12 2020 I: pbuilder-time-stamp: 1585287505 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [librostlab-blast_1.0.1-10.dsc] I: copying [./librostlab-blast_1.0.1.orig.tar.gz] I: copying [./librostlab-blast_1.0.1-10.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sun Mar 17 21:52:25 2019 -12 gpgv: using RSA key F1F007320A035541F0A663CA578A0494D1C646D1 gpgv: issuer "tille@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./librostlab-blast_1.0.1-10.dsc dpkg-source: info: extracting librostlab-blast in librostlab-blast-1.0.1 dpkg-source: info: unpacking librostlab-blast_1.0.1.orig.tar.gz dpkg-source: info: unpacking librostlab-blast_1.0.1-10.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying reproducible.patch I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 11~), d-shlibs, bison, doxygen, flex, graphviz, texlive-latex-recommended, librostlab-dev, texlive-fonts-recommended, texlive-latex-extra dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 11~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on d-shlibs; however: Package d-shlibs is not installed. pbuilder-satisfydepends-dummy depends on bison; however: Package bison is not installed. pbuilder-satisfydepends-dummy depends on doxygen; however: Package doxygen is not installed. pbuilder-satisfydepends-dummy depends on flex; however: Package flex is not installed. pbuilder-satisfydepends-dummy depends on graphviz; however: Package graphviz is not installed. pbuilder-satisfydepends-dummy depends on texlive-latex-recommended; however: Package texlive-latex-recommended is not installed. pbuilder-satisfydepends-dummy depends on librostlab-dev; however: Package librostlab-dev is not installed. pbuilder-satisfydepends-dummy depends on texlive-fonts-recommended; however: Package texlive-fonts-recommended is not installed. pbuilder-satisfydepends-dummy depends on texlive-latex-extra; however: Package texlive-latex-extra is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bison{a} bsdmainutils{a} d-shlibs{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} doxygen{a} dwz{a} file{a} flex{a} fontconfig{a} fontconfig-config{a} fonts-dejavu-core{a} fonts-lmodern{a} gettext{a} gettext-base{a} graphviz{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libavahi-client3{a} libavahi-common-data{a} libavahi-common3{a} libbison-dev{a} libbrotli1{a} libbsd0{a} libcairo2{a} libcdt5{a} libcgraph6{a} libclang1-6.0{a} libcroco3{a} libcups2{a} libcupsimage2{a} libdatrie1{a} libdbus-1-3{a} libedit2{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libfontconfig1{a} libfreetype6{a} libfribidi0{a} libgd3{a} libglib2.0-0{a} libgraphite2-3{a} libgs9{a} libgs9-common{a} libgssapi-krb5-2{a} libgts-0.7-5{a} libgvc6{a} libgvpr2{a} libharfbuzz-icu0{a} libharfbuzz0b{a} libice6{a} libicu63{a} libidn11{a} libijs-0.35{a} libjbig0{a} libjbig2dec0{a} libjpeg62-turbo{a} libk5crypto3{a} libkeyutils1{a} libkpathsea6{a} libkrb5-3{a} libkrb5support0{a} liblab-gamut1{a} liblcms2-2{a} libllvm6.0{a} libltdl7{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libopenjp2-7{a} libpango-1.0-0{a} libpangocairo-1.0-0{a} libpangoft2-1.0-0{a} libpaper-utils{a} libpaper1{a} libpathplan4{a} libpipeline1{a} libpixman-1-0{a} libpng16-16{a} libpotrace0{a} libptexenc1{a} libpython-stdlib{a} libpython2-stdlib{a} libpython2.7-minimal{a} libpython2.7-stdlib{a} libreadline7{a} librostlab3{a} librostlab3-dev{a} libsigsegv2{a} libsm6{a} libssl1.1{a} libsynctex2{a} libteckit0{a} libtexlua52{a} libtexlua53{a} libtexluajit2{a} libthai-data{a} libthai0{a} libtiff5{a} libtool{a} libuchardet0{a} libwebp6{a} libwoff1{a} libx11-6{a} libx11-data{a} libxau6{a} libxaw7{a} libxcb-render0{a} libxcb-shm0{a} libxcb1{a} libxdmcp6{a} libxdot4{a} libxext6{a} libxi6{a} libxml2{a} libxmu6{a} libxpm4{a} libxrender1{a} libxt6{a} libxxhash0{a} libzzip-0-13{a} lsb-base{a} m4{a} man-db{a} mime-support{a} po-debconf{a} poppler-data{a} preview-latex-style{a} python{a} python-minimal{a} python2{a} python2-minimal{a} python2.7{a} python2.7-minimal{a} readline-common{a} sensible-utils{a} t1utils{a} tex-common{a} texlive-base{a} texlive-binaries{a} texlive-fonts-recommended{a} texlive-latex-base{a} texlive-latex-extra{a} texlive-latex-recommended{a} texlive-pictures{a} ucf{a} x11-common{a} xdg-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl dbus fonts-droid-fallback fonts-liberation krb5-locales libarchive-cpio-perl libcupsfilters1 libfile-mimeinfo-perl libfl-dev libglib2.0-data libgpm2 libgts-bin libltdl-dev libmail-sendmail-perl libnet-dbus-perl libx11-protocol-perl lmodern lynx ruby shared-mime-info tex-gyre texlive-plain-generic tipa tk wget x11-utils x11-xserver-utils xdg-user-dirs 0 packages upgraded, 155 newly installed, 0 to remove and 0 not upgraded. Need to get 159 MB of archives. After unpacking 552 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 libpython2.7-minimal i386 2.7.16-2+deb10u1 [395 kB] Get: 8 http://deb.debian.org/debian buster/main i386 python2.7-minimal i386 2.7.16-2+deb10u1 [1381 kB] Get: 9 http://deb.debian.org/debian buster/main i386 python2-minimal i386 2.7.16-1 [41.4 kB] Get: 10 http://deb.debian.org/debian buster/main i386 python-minimal i386 2.7.16-1 [21.0 kB] Get: 11 http://deb.debian.org/debian buster/main i386 libssl1.1 i386 1.1.1d-0+deb10u2 [1538 kB] Get: 12 http://deb.debian.org/debian buster/main i386 mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main i386 libexpat1 i386 2.2.6-2+deb10u1 [104 kB] Get: 14 http://deb.debian.org/debian buster/main i386 readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main i386 libreadline7 i386 7.0-5 [156 kB] Get: 16 http://deb.debian.org/debian buster/main i386 libpython2.7-stdlib i386 2.7.16-2+deb10u1 [1934 kB] Get: 17 http://deb.debian.org/debian buster/main i386 python2.7 i386 2.7.16-2+deb10u1 [305 kB] Get: 18 http://deb.debian.org/debian buster/main i386 libpython2-stdlib i386 2.7.16-1 [20.8 kB] Get: 19 http://deb.debian.org/debian buster/main i386 libpython-stdlib i386 2.7.16-1 [20.8 kB] Get: 20 http://deb.debian.org/debian buster/main i386 python2 i386 2.7.16-1 [41.6 kB] Get: 21 http://deb.debian.org/debian buster/main i386 python i386 2.7.16-1 [22.8 kB] Get: 22 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 23 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 24 http://deb.debian.org/debian buster/main i386 flex i386 2.6.4-6.2 [446 kB] Get: 25 http://deb.debian.org/debian buster/main i386 poppler-data all 0.4.9-2 [1473 kB] Get: 26 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 27 http://deb.debian.org/debian buster/main i386 ucf all 3.0038+nmu1 [69.0 kB] Get: 28 http://deb.debian.org/debian buster/main i386 tex-common all 6.11 [53.1 kB] Get: 29 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 30 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 31 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 32 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 33 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 34 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 35 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 36 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 37 http://deb.debian.org/debian buster/main i386 libbison-dev i386 2:3.3.2.dfsg-1 [500 kB] Get: 38 http://deb.debian.org/debian buster/main i386 bison i386 2:3.3.2.dfsg-1 [877 kB] Get: 39 http://deb.debian.org/debian buster/main i386 d-shlibs all 0.84 [17.2 kB] Get: 40 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 41 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 42 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 43 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 44 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 45 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 46 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 47 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 48 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6 [8443 kB] Get: 49 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 50 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 51 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 52 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 53 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 54 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 55 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 56 http://deb.debian.org/debian buster/main i386 libedit2 i386 3.1-20181209-1 [98.2 kB] Get: 57 http://deb.debian.org/debian buster/main i386 libllvm6.0 i386 1:6.0.1-10 [16.4 MB] Get: 58 http://deb.debian.org/debian buster/main i386 libclang1-6.0 i386 1:6.0.1-10 [7959 kB] Get: 59 http://deb.debian.org/debian buster/main i386 doxygen i386 1.8.13-10 [4004 kB] Get: 60 http://deb.debian.org/debian buster/main i386 libpng16-16 i386 1.6.36-6 [301 kB] Get: 61 http://deb.debian.org/debian buster/main i386 libfreetype6 i386 2.9.1-3+deb10u1 [395 kB] Get: 62 http://deb.debian.org/debian buster/main i386 fonts-dejavu-core all 2.37-1 [1068 kB] Get: 63 http://deb.debian.org/debian buster/main i386 fontconfig-config all 2.13.1-2 [280 kB] Get: 64 http://deb.debian.org/debian buster/main i386 libfontconfig1 i386 2.13.1-2 [357 kB] Get: 65 http://deb.debian.org/debian buster/main i386 fontconfig i386 2.13.1-2 [405 kB] Get: 66 http://deb.debian.org/debian buster/main i386 fonts-lmodern all 2.004.5-6 [4539 kB] Get: 67 http://deb.debian.org/debian buster/main i386 libpixman-1-0 i386 0.36.0-1 [541 kB] Get: 68 http://deb.debian.org/debian buster/main i386 libxau6 i386 1:1.0.8-1+b2 [20.3 kB] Get: 69 http://deb.debian.org/debian buster/main i386 libxdmcp6 i386 1:1.1.2-3 [26.7 kB] Get: 70 http://deb.debian.org/debian buster/main i386 libxcb1 i386 1.13.1-2 [141 kB] Get: 71 http://deb.debian.org/debian buster/main i386 libx11-data all 2:1.6.7-1 [298 kB] Get: 72 http://deb.debian.org/debian buster/main i386 libx11-6 i386 2:1.6.7-1 [778 kB] Get: 73 http://deb.debian.org/debian buster/main i386 libxcb-render0 i386 1.13.1-2 [110 kB] Get: 74 http://deb.debian.org/debian buster/main i386 libxcb-shm0 i386 1.13.1-2 [99.4 kB] Get: 75 http://deb.debian.org/debian buster/main i386 libxext6 i386 2:1.3.3-1+b2 [55.2 kB] Get: 76 http://deb.debian.org/debian buster/main i386 libxrender1 i386 1:0.9.10-1 [34.1 kB] Get: 77 http://deb.debian.org/debian buster/main i386 libcairo2 i386 1.16.0-4 [744 kB] Get: 78 http://deb.debian.org/debian buster/main i386 libcdt5 i386 2.40.1-6 [61.0 kB] Get: 79 http://deb.debian.org/debian buster/main i386 libcgraph6 i386 2.40.1-6 [88.1 kB] Get: 80 http://deb.debian.org/debian buster/main i386 libjpeg62-turbo i386 1:1.5.2-2+b1 [142 kB] Get: 81 http://deb.debian.org/debian buster/main i386 libjbig0 i386 2.1-3.1+b2 [31.5 kB] Get: 82 http://deb.debian.org/debian buster/main i386 libwebp6 i386 0.6.1-2 [275 kB] Get: 83 http://deb.debian.org/debian buster/main i386 libtiff5 i386 4.1.0+git191117-2~deb10u1 [284 kB] Get: 84 http://deb.debian.org/debian buster/main i386 libxpm4 i386 1:3.5.12-1 [50.9 kB] Get: 85 http://deb.debian.org/debian buster/main i386 libgd3 i386 2.2.5-5.2 [141 kB] Get: 86 http://deb.debian.org/debian buster/main i386 libgts-0.7-5 i386 0.7.6+darcs121130-4 [161 kB] Get: 87 http://deb.debian.org/debian buster/main i386 libltdl7 i386 2.4.6-9 [392 kB] Get: 88 http://deb.debian.org/debian buster/main i386 libfribidi0 i386 1.0.5-3.1+deb10u1 [64.3 kB] Get: 89 http://deb.debian.org/debian buster/main i386 libthai-data all 0.1.28-2 [170 kB] Get: 90 http://deb.debian.org/debian buster/main i386 libdatrie1 i386 0.2.12-2 [40.7 kB] Get: 91 http://deb.debian.org/debian buster/main i386 libthai0 i386 0.1.28-2 [55.2 kB] Get: 92 http://deb.debian.org/debian buster/main i386 libpango-1.0-0 i386 1.42.4-7~deb10u1 [191 kB] Get: 93 http://deb.debian.org/debian buster/main i386 libgraphite2-3 i386 1.3.13-7 [84.0 kB] Get: 94 http://deb.debian.org/debian buster/main i386 libharfbuzz0b i386 2.3.1-1 [1209 kB] Get: 95 http://deb.debian.org/debian buster/main i386 libpangoft2-1.0-0 i386 1.42.4-7~deb10u1 [71.0 kB] Get: 96 http://deb.debian.org/debian buster/main i386 libpangocairo-1.0-0 i386 1.42.4-7~deb10u1 [57.1 kB] Get: 97 http://deb.debian.org/debian buster/main i386 libpathplan4 i386 2.40.1-6 [64.0 kB] Get: 98 http://deb.debian.org/debian buster/main i386 libxdot4 i386 2.40.1-6 [57.9 kB] Get: 99 http://deb.debian.org/debian buster/main i386 libgvc6 i386 2.40.1-6 [676 kB] Get: 100 http://deb.debian.org/debian buster/main i386 libgvpr2 i386 2.40.1-6 [223 kB] Get: 101 http://deb.debian.org/debian buster/main i386 lsb-base all 10.2019051400 [28.4 kB] Get: 102 http://deb.debian.org/debian buster/main i386 x11-common all 1:7.7+19 [251 kB] Get: 103 http://deb.debian.org/debian buster/main i386 libice6 i386 2:1.0.9-2 [61.1 kB] Get: 104 http://deb.debian.org/debian buster/main i386 liblab-gamut1 i386 2.40.1-6 [220 kB] Get: 105 http://deb.debian.org/debian buster/main i386 libsm6 i386 2:1.2.3-1 [35.7 kB] Get: 106 http://deb.debian.org/debian buster/main i386 libxt6 i386 1:1.1.5-1+b3 [195 kB] Get: 107 http://deb.debian.org/debian buster/main i386 libxmu6 i386 2:1.1.2-2+b3 [62.8 kB] Get: 108 http://deb.debian.org/debian buster/main i386 libxaw7 i386 2:1.0.13-1+b2 [209 kB] Get: 109 http://deb.debian.org/debian buster/main i386 graphviz i386 2.40.1-6 [595 kB] Get: 110 http://deb.debian.org/debian buster/main i386 libavahi-common-data i386 0.7-4+b1 [122 kB] Get: 111 http://deb.debian.org/debian buster/main i386 libavahi-common3 i386 0.7-4+b1 [56.2 kB] Get: 112 http://deb.debian.org/debian buster/main i386 libdbus-1-3 i386 1.12.16-1 [226 kB] Get: 113 http://deb.debian.org/debian buster/main i386 libavahi-client3 i386 0.7-4+b1 [60.1 kB] Get: 114 http://deb.debian.org/debian buster/main i386 libbrotli1 i386 1.0.7-2 [267 kB] Get: 115 http://deb.debian.org/debian buster/main i386 libkeyutils1 i386 1.6-6 [15.4 kB] Get: 116 http://deb.debian.org/debian buster/main i386 libkrb5support0 i386 1.17-3 [68.6 kB] Get: 117 http://deb.debian.org/debian buster/main i386 libk5crypto3 i386 1.17-3 [126 kB] Get: 118 http://deb.debian.org/debian buster/main i386 libkrb5-3 i386 1.17-3 [396 kB] Get: 119 http://deb.debian.org/debian buster/main i386 libgssapi-krb5-2 i386 1.17-3 [168 kB] Get: 120 http://deb.debian.org/debian buster/main i386 libcups2 i386 2.2.10-6+deb10u2 [338 kB] Get: 121 http://deb.debian.org/debian buster/main i386 libcupsimage2 i386 2.2.10-6+deb10u2 [133 kB] Get: 122 http://deb.debian.org/debian buster/main i386 libgs9-common all 9.27~dfsg-2+deb10u3 [5136 kB] Get: 123 http://deb.debian.org/debian buster/main i386 libidn11 i386 1.33-2.2 [116 kB] Get: 124 http://deb.debian.org/debian buster/main i386 libijs-0.35 i386 0.35-14 [18.9 kB] Get: 125 http://deb.debian.org/debian buster/main i386 libjbig2dec0 i386 0.16-1 [64.6 kB] Get: 126 http://deb.debian.org/debian buster/main i386 liblcms2-2 i386 2.9-3 [156 kB] Get: 127 http://deb.debian.org/debian buster/main i386 libopenjp2-7 i386 2.3.0-2+deb10u1 [164 kB] Get: 128 http://deb.debian.org/debian buster/main i386 libpaper1 i386 1.1.28 [21.4 kB] Get: 129 http://deb.debian.org/debian buster/main i386 libgs9 i386 9.27~dfsg-2+deb10u3 [2300 kB] Get: 130 http://deb.debian.org/debian buster/main i386 libharfbuzz-icu0 i386 2.3.1-1 [834 kB] Get: 131 http://deb.debian.org/debian buster/main i386 libkpathsea6 i386 2018.20181218.49446-1 [171 kB] Get: 132 http://deb.debian.org/debian buster/main i386 libpaper-utils i386 1.1.28 [18.3 kB] Get: 133 http://deb.debian.org/debian buster/main i386 libpotrace0 i386 1.15-1 [25.6 kB] Get: 134 http://deb.debian.org/debian buster/main i386 libptexenc1 i386 2018.20181218.49446-1 [61.6 kB] Get: 135 http://deb.debian.org/debian buster/main i386 librostlab3 i386 1.0.20-8 [6192 B] Get: 136 http://deb.debian.org/debian buster/main i386 librostlab3-dev i386 1.0.20-8 [13.6 kB] Get: 137 http://deb.debian.org/debian buster/main i386 libsynctex2 i386 2018.20181218.49446-1 [83.5 kB] Get: 138 http://deb.debian.org/debian buster/main i386 libteckit0 i386 2.5.8+ds2-5 [268 kB] Get: 139 http://deb.debian.org/debian buster/main i386 libtexlua52 i386 2018.20181218.49446-1 [121 kB] Get: 140 http://deb.debian.org/debian buster/main i386 libtexlua53 i386 2018.20181218.49446-1 [141 kB] Get: 141 http://deb.debian.org/debian buster/main i386 libtexluajit2 i386 2018.20181218.49446-1 [270 kB] Get: 142 http://deb.debian.org/debian buster/main i386 libwoff1 i386 1.0.2-1 [46.0 kB] Get: 143 http://deb.debian.org/debian buster/main i386 libxi6 i386 2:1.7.9-1 [85.2 kB] Get: 144 http://deb.debian.org/debian buster/main i386 libxxhash0 i386 0.6.5-2 [8788 B] Get: 145 http://deb.debian.org/debian buster/main i386 libzzip-0-13 i386 0.13.62-3.2 [57.3 kB] Get: 146 http://deb.debian.org/debian buster/main i386 preview-latex-style all 11.91-2 [201 kB] Get: 147 http://deb.debian.org/debian buster/main i386 t1utils i386 1.41-3 [62.2 kB] Get: 148 http://deb.debian.org/debian buster/main i386 texlive-binaries i386 2018.20181218.49446-1 [11.2 MB] Get: 149 http://deb.debian.org/debian buster/main i386 xdg-utils all 1.1.3-1 [73.3 kB] Get: 150 http://deb.debian.org/debian buster/main i386 texlive-base all 2018.20190227-2 [19.7 MB] Get: 151 http://deb.debian.org/debian buster/main i386 texlive-fonts-recommended all 2018.20190227-2 [5228 kB] Get: 152 http://deb.debian.org/debian buster/main i386 texlive-latex-base all 2018.20190227-2 [984 kB] Get: 153 http://deb.debian.org/debian buster/main i386 texlive-latex-recommended all 2018.20190227-2 [15.2 MB] Get: 154 http://deb.debian.org/debian buster/main i386 texlive-pictures all 2018.20190227-2 [8201 kB] Get: 155 http://deb.debian.org/debian buster/main i386 texlive-latex-extra all 2018.20190227-2 [12.3 MB] Fetched 159 MB in 35s (4576 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../02-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../04-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libpython2.7-minimal:i386. Preparing to unpack .../06-libpython2.7-minimal_2.7.16-2+deb10u1_i386.deb ... Unpacking libpython2.7-minimal:i386 (2.7.16-2+deb10u1) ... Selecting previously unselected package python2.7-minimal. Preparing to unpack .../07-python2.7-minimal_2.7.16-2+deb10u1_i386.deb ... Unpacking python2.7-minimal (2.7.16-2+deb10u1) ... Selecting previously unselected package python2-minimal. Preparing to unpack .../08-python2-minimal_2.7.16-1_i386.deb ... Unpacking python2-minimal (2.7.16-1) ... Selecting previously unselected package python-minimal. Preparing to unpack .../09-python-minimal_2.7.16-1_i386.deb ... Unpacking python-minimal (2.7.16-1) ... Selecting previously unselected package libssl1.1:i386. Preparing to unpack .../10-libssl1.1_1.1.1d-0+deb10u2_i386.deb ... Unpacking libssl1.1:i386 (1.1.1d-0+deb10u2) ... Selecting previously unselected package mime-support. Preparing to unpack .../11-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../12-libexpat1_2.2.6-2+deb10u1_i386.deb ... Unpacking libexpat1:i386 (2.2.6-2+deb10u1) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:i386. Preparing to unpack .../14-libreadline7_7.0-5_i386.deb ... Unpacking libreadline7:i386 (7.0-5) ... Selecting previously unselected package libpython2.7-stdlib:i386. Preparing to unpack .../15-libpython2.7-stdlib_2.7.16-2+deb10u1_i386.deb ... Unpacking libpython2.7-stdlib:i386 (2.7.16-2+deb10u1) ... Selecting previously unselected package python2.7. Preparing to unpack .../16-python2.7_2.7.16-2+deb10u1_i386.deb ... Unpacking python2.7 (2.7.16-2+deb10u1) ... Selecting previously unselected package libpython2-stdlib:i386. Preparing to unpack .../17-libpython2-stdlib_2.7.16-1_i386.deb ... Unpacking libpython2-stdlib:i386 (2.7.16-1) ... Selecting previously unselected package libpython-stdlib:i386. Preparing to unpack .../18-libpython-stdlib_2.7.16-1_i386.deb ... Unpacking libpython-stdlib:i386 (2.7.16-1) ... Setting up libpython2.7-minimal:i386 (2.7.16-2+deb10u1) ... Setting up python2.7-minimal (2.7.16-2+deb10u1) ... Setting up python2-minimal (2.7.16-1) ... Selecting previously unselected package python2. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20696 files and directories currently installed.) Preparing to unpack .../python2_2.7.16-1_i386.deb ... Unpacking python2 (2.7.16-1) ... Setting up python-minimal (2.7.16-1) ... Selecting previously unselected package python. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20729 files and directories currently installed.) Preparing to unpack .../000-python_2.7.16-1_i386.deb ... Unpacking python (2.7.16-1) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../001-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../002-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package flex. Preparing to unpack .../003-flex_2.6.4-6.2_i386.deb ... Unpacking flex (2.6.4-6.2) ... Selecting previously unselected package poppler-data. Preparing to unpack .../004-poppler-data_0.4.9-2_all.deb ... Unpacking poppler-data (0.4.9-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../005-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package ucf. Preparing to unpack .../006-ucf_3.0038+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0038+nmu1) ... Selecting previously unselected package tex-common. Preparing to unpack .../007-tex-common_6.11_all.deb ... Unpacking tex-common (6.11) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../008-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../009-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../010-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../011-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package autoconf. Preparing to unpack .../012-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../013-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../014-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../015-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libbison-dev:i386. Preparing to unpack .../016-libbison-dev_2%3a3.3.2.dfsg-1_i386.deb ... Unpacking libbison-dev:i386 (2:3.3.2.dfsg-1) ... Selecting previously unselected package bison. Preparing to unpack .../017-bison_2%3a3.3.2.dfsg-1_i386.deb ... Unpacking bison (2:3.3.2.dfsg-1) ... Selecting previously unselected package d-shlibs. Preparing to unpack .../018-d-shlibs_0.84_all.deb ... Unpacking d-shlibs (0.84) ... Selecting previously unselected package libtool. Preparing to unpack .../019-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../020-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../021-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../022-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../023-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../024-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../025-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../026-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../027-libicu63_63.1-6_i386.deb ... Unpacking libicu63:i386 (63.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../028-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../029-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../030-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../031-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../032-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../033-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../034-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libedit2:i386. Preparing to unpack .../035-libedit2_3.1-20181209-1_i386.deb ... Unpacking libedit2:i386 (3.1-20181209-1) ... Selecting previously unselected package libllvm6.0:i386. Preparing to unpack .../036-libllvm6.0_1%3a6.0.1-10_i386.deb ... Unpacking libllvm6.0:i386 (1:6.0.1-10) ... Selecting previously unselected package libclang1-6.0:i386. Preparing to unpack .../037-libclang1-6.0_1%3a6.0.1-10_i386.deb ... Unpacking libclang1-6.0:i386 (1:6.0.1-10) ... Selecting previously unselected package doxygen. Preparing to unpack .../038-doxygen_1.8.13-10_i386.deb ... Unpacking doxygen (1.8.13-10) ... Selecting previously unselected package libpng16-16:i386. Preparing to unpack .../039-libpng16-16_1.6.36-6_i386.deb ... Unpacking libpng16-16:i386 (1.6.36-6) ... Selecting previously unselected package libfreetype6:i386. Preparing to unpack .../040-libfreetype6_2.9.1-3+deb10u1_i386.deb ... Unpacking libfreetype6:i386 (2.9.1-3+deb10u1) ... Selecting previously unselected package fonts-dejavu-core. Preparing to unpack .../041-fonts-dejavu-core_2.37-1_all.deb ... Unpacking fonts-dejavu-core (2.37-1) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../042-fontconfig-config_2.13.1-2_all.deb ... Unpacking fontconfig-config (2.13.1-2) ... Selecting previously unselected package libfontconfig1:i386. Preparing to unpack .../043-libfontconfig1_2.13.1-2_i386.deb ... Unpacking libfontconfig1:i386 (2.13.1-2) ... Selecting previously unselected package fontconfig. Preparing to unpack .../044-fontconfig_2.13.1-2_i386.deb ... Unpacking fontconfig (2.13.1-2) ... Selecting previously unselected package fonts-lmodern. Preparing to unpack .../045-fonts-lmodern_2.004.5-6_all.deb ... Unpacking fonts-lmodern (2.004.5-6) ... Selecting previously unselected package libpixman-1-0:i386. Preparing to unpack .../046-libpixman-1-0_0.36.0-1_i386.deb ... Unpacking libpixman-1-0:i386 (0.36.0-1) ... Selecting previously unselected package libxau6:i386. Preparing to unpack .../047-libxau6_1%3a1.0.8-1+b2_i386.deb ... Unpacking libxau6:i386 (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp6:i386. Preparing to unpack .../048-libxdmcp6_1%3a1.1.2-3_i386.deb ... Unpacking libxdmcp6:i386 (1:1.1.2-3) ... Selecting previously unselected package libxcb1:i386. Preparing to unpack .../049-libxcb1_1.13.1-2_i386.deb ... Unpacking libxcb1:i386 (1.13.1-2) ... Selecting previously unselected package libx11-data. Preparing to unpack .../050-libx11-data_2%3a1.6.7-1_all.deb ... Unpacking libx11-data (2:1.6.7-1) ... Selecting previously unselected package libx11-6:i386. Preparing to unpack .../051-libx11-6_2%3a1.6.7-1_i386.deb ... Unpacking libx11-6:i386 (2:1.6.7-1) ... Selecting previously unselected package libxcb-render0:i386. Preparing to unpack .../052-libxcb-render0_1.13.1-2_i386.deb ... Unpacking libxcb-render0:i386 (1.13.1-2) ... Selecting previously unselected package libxcb-shm0:i386. Preparing to unpack .../053-libxcb-shm0_1.13.1-2_i386.deb ... Unpacking libxcb-shm0:i386 (1.13.1-2) ... Selecting previously unselected package libxext6:i386. Preparing to unpack .../054-libxext6_2%3a1.3.3-1+b2_i386.deb ... Unpacking libxext6:i386 (2:1.3.3-1+b2) ... Selecting previously unselected package libxrender1:i386. Preparing to unpack .../055-libxrender1_1%3a0.9.10-1_i386.deb ... Unpacking libxrender1:i386 (1:0.9.10-1) ... Selecting previously unselected package libcairo2:i386. Preparing to unpack .../056-libcairo2_1.16.0-4_i386.deb ... Unpacking libcairo2:i386 (1.16.0-4) ... Selecting previously unselected package libcdt5. Preparing to unpack .../057-libcdt5_2.40.1-6_i386.deb ... Unpacking libcdt5 (2.40.1-6) ... Selecting previously unselected package libcgraph6. Preparing to unpack .../058-libcgraph6_2.40.1-6_i386.deb ... Unpacking libcgraph6 (2.40.1-6) ... Selecting previously unselected package libjpeg62-turbo:i386. Preparing to unpack .../059-libjpeg62-turbo_1%3a1.5.2-2+b1_i386.deb ... Unpacking libjpeg62-turbo:i386 (1:1.5.2-2+b1) ... Selecting previously unselected package libjbig0:i386. Preparing to unpack .../060-libjbig0_2.1-3.1+b2_i386.deb ... Unpacking libjbig0:i386 (2.1-3.1+b2) ... Selecting previously unselected package libwebp6:i386. Preparing to unpack .../061-libwebp6_0.6.1-2_i386.deb ... Unpacking libwebp6:i386 (0.6.1-2) ... Selecting previously unselected package libtiff5:i386. Preparing to unpack .../062-libtiff5_4.1.0+git191117-2~deb10u1_i386.deb ... Unpacking libtiff5:i386 (4.1.0+git191117-2~deb10u1) ... Selecting previously unselected package libxpm4:i386. Preparing to unpack .../063-libxpm4_1%3a3.5.12-1_i386.deb ... Unpacking libxpm4:i386 (1:3.5.12-1) ... Selecting previously unselected package libgd3:i386. Preparing to unpack .../064-libgd3_2.2.5-5.2_i386.deb ... Unpacking libgd3:i386 (2.2.5-5.2) ... Selecting previously unselected package libgts-0.7-5:i386. Preparing to unpack .../065-libgts-0.7-5_0.7.6+darcs121130-4_i386.deb ... Unpacking libgts-0.7-5:i386 (0.7.6+darcs121130-4) ... Selecting previously unselected package libltdl7:i386. Preparing to unpack .../066-libltdl7_2.4.6-9_i386.deb ... Unpacking libltdl7:i386 (2.4.6-9) ... Selecting previously unselected package libfribidi0:i386. Preparing to unpack .../067-libfribidi0_1.0.5-3.1+deb10u1_i386.deb ... Unpacking libfribidi0:i386 (1.0.5-3.1+deb10u1) ... Selecting previously unselected package libthai-data. Preparing to unpack .../068-libthai-data_0.1.28-2_all.deb ... Unpacking libthai-data (0.1.28-2) ... Selecting previously unselected package libdatrie1:i386. Preparing to unpack .../069-libdatrie1_0.2.12-2_i386.deb ... Unpacking libdatrie1:i386 (0.2.12-2) ... Selecting previously unselected package libthai0:i386. Preparing to unpack .../070-libthai0_0.1.28-2_i386.deb ... Unpacking libthai0:i386 (0.1.28-2) ... Selecting previously unselected package libpango-1.0-0:i386. Preparing to unpack .../071-libpango-1.0-0_1.42.4-7~deb10u1_i386.deb ... Unpacking libpango-1.0-0:i386 (1.42.4-7~deb10u1) ... Selecting previously unselected package libgraphite2-3:i386. Preparing to unpack .../072-libgraphite2-3_1.3.13-7_i386.deb ... Unpacking libgraphite2-3:i386 (1.3.13-7) ... Selecting previously unselected package libharfbuzz0b:i386. Preparing to unpack .../073-libharfbuzz0b_2.3.1-1_i386.deb ... Unpacking libharfbuzz0b:i386 (2.3.1-1) ... Selecting previously unselected package libpangoft2-1.0-0:i386. Preparing to unpack .../074-libpangoft2-1.0-0_1.42.4-7~deb10u1_i386.deb ... Unpacking libpangoft2-1.0-0:i386 (1.42.4-7~deb10u1) ... Selecting previously unselected package libpangocairo-1.0-0:i386. Preparing to unpack .../075-libpangocairo-1.0-0_1.42.4-7~deb10u1_i386.deb ... Unpacking libpangocairo-1.0-0:i386 (1.42.4-7~deb10u1) ... Selecting previously unselected package libpathplan4. Preparing to unpack .../076-libpathplan4_2.40.1-6_i386.deb ... Unpacking libpathplan4 (2.40.1-6) ... Selecting previously unselected package libxdot4. Preparing to unpack .../077-libxdot4_2.40.1-6_i386.deb ... Unpacking libxdot4 (2.40.1-6) ... Selecting previously unselected package libgvc6. Preparing to unpack .../078-libgvc6_2.40.1-6_i386.deb ... Unpacking libgvc6 (2.40.1-6) ... Selecting previously unselected package libgvpr2. Preparing to unpack .../079-libgvpr2_2.40.1-6_i386.deb ... Unpacking libgvpr2 (2.40.1-6) ... Selecting previously unselected package lsb-base. Preparing to unpack .../080-lsb-base_10.2019051400_all.deb ... Unpacking lsb-base (10.2019051400) ... Selecting previously unselected package x11-common. Preparing to unpack .../081-x11-common_1%3a7.7+19_all.deb ... Unpacking x11-common (1:7.7+19) ... Selecting previously unselected package libice6:i386. Preparing to unpack .../082-libice6_2%3a1.0.9-2_i386.deb ... Unpacking libice6:i386 (2:1.0.9-2) ... Selecting previously unselected package liblab-gamut1. Preparing to unpack .../083-liblab-gamut1_2.40.1-6_i386.deb ... Unpacking liblab-gamut1 (2.40.1-6) ... Selecting previously unselected package libsm6:i386. Preparing to unpack .../084-libsm6_2%3a1.2.3-1_i386.deb ... Unpacking libsm6:i386 (2:1.2.3-1) ... Selecting previously unselected package libxt6:i386. Preparing to unpack .../085-libxt6_1%3a1.1.5-1+b3_i386.deb ... Unpacking libxt6:i386 (1:1.1.5-1+b3) ... Selecting previously unselected package libxmu6:i386. Preparing to unpack .../086-libxmu6_2%3a1.1.2-2+b3_i386.deb ... Unpacking libxmu6:i386 (2:1.1.2-2+b3) ... Selecting previously unselected package libxaw7:i386. Preparing to unpack .../087-libxaw7_2%3a1.0.13-1+b2_i386.deb ... Unpacking libxaw7:i386 (2:1.0.13-1+b2) ... Selecting previously unselected package graphviz. Preparing to unpack .../088-graphviz_2.40.1-6_i386.deb ... Unpacking graphviz (2.40.1-6) ... Selecting previously unselected package libavahi-common-data:i386. Preparing to unpack .../089-libavahi-common-data_0.7-4+b1_i386.deb ... Unpacking libavahi-common-data:i386 (0.7-4+b1) ... Selecting previously unselected package libavahi-common3:i386. Preparing to unpack .../090-libavahi-common3_0.7-4+b1_i386.deb ... Unpacking libavahi-common3:i386 (0.7-4+b1) ... Selecting previously unselected package libdbus-1-3:i386. Preparing to unpack .../091-libdbus-1-3_1.12.16-1_i386.deb ... Unpacking libdbus-1-3:i386 (1.12.16-1) ... Selecting previously unselected package libavahi-client3:i386. Preparing to unpack .../092-libavahi-client3_0.7-4+b1_i386.deb ... Unpacking libavahi-client3:i386 (0.7-4+b1) ... Selecting previously unselected package libbrotli1:i386. Preparing to unpack .../093-libbrotli1_1.0.7-2_i386.deb ... Unpacking libbrotli1:i386 (1.0.7-2) ... Selecting previously unselected package libkeyutils1:i386. Preparing to unpack .../094-libkeyutils1_1.6-6_i386.deb ... Unpacking libkeyutils1:i386 (1.6-6) ... Selecting previously unselected package libkrb5support0:i386. Preparing to unpack .../095-libkrb5support0_1.17-3_i386.deb ... Unpacking libkrb5support0:i386 (1.17-3) ... Selecting previously unselected package libk5crypto3:i386. Preparing to unpack .../096-libk5crypto3_1.17-3_i386.deb ... Unpacking libk5crypto3:i386 (1.17-3) ... Selecting previously unselected package libkrb5-3:i386. Preparing to unpack .../097-libkrb5-3_1.17-3_i386.deb ... Unpacking libkrb5-3:i386 (1.17-3) ... Selecting previously unselected package libgssapi-krb5-2:i386. Preparing to unpack .../098-libgssapi-krb5-2_1.17-3_i386.deb ... Unpacking libgssapi-krb5-2:i386 (1.17-3) ... Selecting previously unselected package libcups2:i386. Preparing to unpack .../099-libcups2_2.2.10-6+deb10u2_i386.deb ... Unpacking libcups2:i386 (2.2.10-6+deb10u2) ... Selecting previously unselected package libcupsimage2:i386. Preparing to unpack .../100-libcupsimage2_2.2.10-6+deb10u2_i386.deb ... Unpacking libcupsimage2:i386 (2.2.10-6+deb10u2) ... Selecting previously unselected package libgs9-common. Preparing to unpack .../101-libgs9-common_9.27~dfsg-2+deb10u3_all.deb ... Unpacking libgs9-common (9.27~dfsg-2+deb10u3) ... Selecting previously unselected package libidn11:i386. Preparing to unpack .../102-libidn11_1.33-2.2_i386.deb ... Unpacking libidn11:i386 (1.33-2.2) ... Selecting previously unselected package libijs-0.35:i386. Preparing to unpack .../103-libijs-0.35_0.35-14_i386.deb ... Unpacking libijs-0.35:i386 (0.35-14) ... Selecting previously unselected package libjbig2dec0:i386. Preparing to unpack .../104-libjbig2dec0_0.16-1_i386.deb ... Unpacking libjbig2dec0:i386 (0.16-1) ... Selecting previously unselected package liblcms2-2:i386. Preparing to unpack .../105-liblcms2-2_2.9-3_i386.deb ... Unpacking liblcms2-2:i386 (2.9-3) ... Selecting previously unselected package libopenjp2-7:i386. Preparing to unpack .../106-libopenjp2-7_2.3.0-2+deb10u1_i386.deb ... Unpacking libopenjp2-7:i386 (2.3.0-2+deb10u1) ... Selecting previously unselected package libpaper1:i386. Preparing to unpack .../107-libpaper1_1.1.28_i386.deb ... Unpacking libpaper1:i386 (1.1.28) ... Selecting previously unselected package libgs9:i386. Preparing to unpack .../108-libgs9_9.27~dfsg-2+deb10u3_i386.deb ... Unpacking libgs9:i386 (9.27~dfsg-2+deb10u3) ... Selecting previously unselected package libharfbuzz-icu0:i386. Preparing to unpack .../109-libharfbuzz-icu0_2.3.1-1_i386.deb ... Unpacking libharfbuzz-icu0:i386 (2.3.1-1) ... Selecting previously unselected package libkpathsea6:i386. Preparing to unpack .../110-libkpathsea6_2018.20181218.49446-1_i386.deb ... Unpacking libkpathsea6:i386 (2018.20181218.49446-1) ... Selecting previously unselected package libpaper-utils. Preparing to unpack .../111-libpaper-utils_1.1.28_i386.deb ... Unpacking libpaper-utils (1.1.28) ... Selecting previously unselected package libpotrace0:i386. Preparing to unpack .../112-libpotrace0_1.15-1_i386.deb ... Unpacking libpotrace0:i386 (1.15-1) ... Selecting previously unselected package libptexenc1:i386. Preparing to unpack .../113-libptexenc1_2018.20181218.49446-1_i386.deb ... Unpacking libptexenc1:i386 (2018.20181218.49446-1) ... Selecting previously unselected package librostlab3. Preparing to unpack .../114-librostlab3_1.0.20-8_i386.deb ... Unpacking librostlab3 (1.0.20-8) ... Selecting previously unselected package librostlab3-dev. Preparing to unpack .../115-librostlab3-dev_1.0.20-8_i386.deb ... Unpacking librostlab3-dev (1.0.20-8) ... Selecting previously unselected package libsynctex2:i386. Preparing to unpack .../116-libsynctex2_2018.20181218.49446-1_i386.deb ... Unpacking libsynctex2:i386 (2018.20181218.49446-1) ... Selecting previously unselected package libteckit0:i386. Preparing to unpack .../117-libteckit0_2.5.8+ds2-5_i386.deb ... Unpacking libteckit0:i386 (2.5.8+ds2-5) ... Selecting previously unselected package libtexlua52:i386. Preparing to unpack .../118-libtexlua52_2018.20181218.49446-1_i386.deb ... Unpacking libtexlua52:i386 (2018.20181218.49446-1) ... Selecting previously unselected package libtexlua53:i386. Preparing to unpack .../119-libtexlua53_2018.20181218.49446-1_i386.deb ... Unpacking libtexlua53:i386 (2018.20181218.49446-1) ... Selecting previously unselected package libtexluajit2:i386. Preparing to unpack .../120-libtexluajit2_2018.20181218.49446-1_i386.deb ... Unpacking libtexluajit2:i386 (2018.20181218.49446-1) ... Selecting previously unselected package libwoff1:i386. Preparing to unpack .../121-libwoff1_1.0.2-1_i386.deb ... Unpacking libwoff1:i386 (1.0.2-1) ... Selecting previously unselected package libxi6:i386. Preparing to unpack .../122-libxi6_2%3a1.7.9-1_i386.deb ... Unpacking libxi6:i386 (2:1.7.9-1) ... Selecting previously unselected package libxxhash0:i386. Preparing to unpack .../123-libxxhash0_0.6.5-2_i386.deb ... Unpacking libxxhash0:i386 (0.6.5-2) ... Selecting previously unselected package libzzip-0-13:i386. Preparing to unpack .../124-libzzip-0-13_0.13.62-3.2_i386.deb ... Unpacking libzzip-0-13:i386 (0.13.62-3.2) ... Selecting previously unselected package preview-latex-style. Preparing to unpack .../125-preview-latex-style_11.91-2_all.deb ... Unpacking preview-latex-style (11.91-2) ... Selecting previously unselected package t1utils. Preparing to unpack .../126-t1utils_1.41-3_i386.deb ... Unpacking t1utils (1.41-3) ... Selecting previously unselected package texlive-binaries. Preparing to unpack .../127-texlive-binaries_2018.20181218.49446-1_i386.deb ... Unpacking texlive-binaries (2018.20181218.49446-1) ... Selecting previously unselected package xdg-utils. Preparing to unpack .../128-xdg-utils_1.1.3-1_all.deb ... Unpacking xdg-utils (1.1.3-1) ... Selecting previously unselected package texlive-base. Preparing to unpack .../129-texlive-base_2018.20190227-2_all.deb ... Unpacking texlive-base (2018.20190227-2) ... Selecting previously unselected package texlive-fonts-recommended. Preparing to unpack .../130-texlive-fonts-recommended_2018.20190227-2_all.deb ... Unpacking texlive-fonts-recommended (2018.20190227-2) ... Selecting previously unselected package texlive-latex-base. Preparing to unpack .../131-texlive-latex-base_2018.20190227-2_all.deb ... Unpacking texlive-latex-base (2018.20190227-2) ... Selecting previously unselected package texlive-latex-recommended. Preparing to unpack .../132-texlive-latex-recommended_2018.20190227-2_all.deb ... Unpacking texlive-latex-recommended (2018.20190227-2) ... Selecting previously unselected package texlive-pictures. Preparing to unpack .../133-texlive-pictures_2018.20190227-2_all.deb ... Unpacking texlive-pictures (2018.20190227-2) ... Selecting previously unselected package texlive-latex-extra. Preparing to unpack .../134-texlive-latex-extra_2018.20190227-2_all.deb ... Unpacking texlive-latex-extra (2018.20190227-2) ... Setting up libgs9-common (9.27~dfsg-2+deb10u3) ... Setting up libexpat1:i386 (2.2.6-2+deb10u1) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up libxdot4 (2.40.1-6) ... Setting up libgraphite2-3:i386 (1.3.13-7) ... Setting up liblcms2-2:i386 (2.9-3) ... Setting up libpixman-1-0:i386 (0.36.0-1) ... Setting up lsb-base (10.2019051400) ... Setting up libxau6:i386 (1:1.0.8-1+b2) ... Setting up libkeyutils1:i386 (1.6-6) ... Setting up mime-support (3.62) ... Setting up libtexlua52:i386 (2018.20181218.49446-1) ... Setting up libbison-dev:i386 (2:3.3.2.dfsg-1) ... Setting up libdatrie1:i386 (0.2.12-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libtexlua53:i386 (2018.20181218.49446-1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libssl1.1:i386 (1.1.1d-0+deb10u2) ... Setting up libijs-0.35:i386 (0.35-14) ... Setting up libtexluajit2:i386 (2018.20181218.49446-1) ... Setting up libbrotli1:i386 (1.0.7-2) ... Setting up liblab-gamut1 (2.40.1-6) ... Setting up x11-common (1:7.7+19) ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults invoke-rc.d: could not determine current runlevel Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up libzzip-0-13:i386 (0.13.62-3.2) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libjbig0:i386 (2.1-3.1+b2) ... Setting up libicu63:i386 (63.1-6) ... Setting up poppler-data (0.4.9-2) ... Setting up libkrb5support0:i386 (1.17-3) ... Setting up libgts-0.7-5:i386 (0.7.6+darcs121130-4) ... Setting up autotools-dev (20180224.1) ... Setting up libjpeg62-turbo:i386 (1:1.5.2-2+b1) ... Setting up libx11-data (2:1.6.7-1) ... Setting up libjbig2dec0:i386 (0.16-1) ... Setting up libidn11:i386 (1.33-2.2) ... Setting up libteckit0:i386 (2.5.8+ds2-5) ... Setting up libpathplan4 (2.40.1-6) ... Setting up libavahi-common-data:i386 (0.7-4+b1) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libdbus-1-3:i386 (1.12.16-1) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up libfribidi0:i386 (1.0.5-3.1+deb10u1) ... Setting up t1utils (1.41-3) ... Setting up libpng16-16:i386 (1.6.36-6) ... Setting up autopoint (0.19.8.1-9) ... Setting up libwebp6:i386 (0.6.1-2) ... Setting up fonts-dejavu-core (2.37-1) ... Setting up d-shlibs (0.84) ... Setting up libk5crypto3:i386 (1.17-3) ... Setting up libltdl7:i386 (2.4.6-9) ... Setting up libkpathsea6:i386 (2018.20181218.49446-1) ... Setting up librostlab3 (1.0.20-8) ... Setting up sensible-utils (0.0.12) ... Setting up libxxhash0:i386 (0.6.5-2) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up fonts-lmodern (2.004.5-6) ... Setting up libopenjp2-7:i386 (2.3.0-2+deb10u1) ... Setting up libthai-data (0.1.28-2) ... Setting up libcdt5 (2.40.1-6) ... Setting up libkrb5-3:i386 (1.17-3) ... Setting up libcgraph6 (2.40.1-6) ... Setting up libtiff5:i386 (4.1.0+git191117-2~deb10u1) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up xdg-utils (1.1.3-1) ... Setting up libsynctex2:i386 (2018.20181218.49446-1) ... Setting up libreadline7:i386 (7.0-5) ... Setting up libpotrace0:i386 (1.15-1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libice6:i386 (2:1.0.9-2) ... Setting up libxdmcp6:i386 (1:1.1.2-3) ... Setting up libxcb1:i386 (1.13.1-2) ... Setting up libwoff1:i386 (1.0.2-1) ... Setting up libtool (2.4.6-9) ... Setting up libxcb-render0:i386 (1.13.1-2) ... Setting up libedit2:i386 (3.1-20181209-1) ... Setting up libavahi-common3:i386 (0.7-4+b1) ... Setting up m4 (1.4.18-2) ... Setting up libxcb-shm0:i386 (1.13.1-2) ... Setting up librostlab3-dev (1.0.20-8) ... Setting up libllvm6.0:i386 (1:6.0.1-10) ... Setting up libclang1-6.0:i386 (1:6.0.1-10) ... Setting up libpython2.7-stdlib:i386 (2.7.16-2+deb10u1) ... Setting up libthai0:i386 (0.1.28-2) ... Setting up doxygen (1.8.13-10) ... Setting up libptexenc1:i386 (2018.20181218.49446-1) ... Setting up libfreetype6:i386 (2.9.1-3+deb10u1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libgssapi-krb5-2:i386 (1.17-3) ... Setting up libcroco3:i386 (0.6.12-3) ... Setting up ucf (3.0038+nmu1) ... Setting up autoconf (2.69-11) ... Setting up libgvpr2 (2.40.1-6) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up bison (2:3.3.2.dfsg-1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up libx11-6:i386 (2:1.6.7-1) ... Setting up libharfbuzz0b:i386 (2.3.1-1) ... Setting up libsm6:i386 (2:1.2.3-1) ... Setting up libavahi-client3:i386 (0.7-4+b1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libpaper1:i386 (1.1.28) ... Creating config file /etc/papersize with new version Setting up flex (2.6.4-6.2) ... Setting up gettext (0.19.8.1-9) ... Setting up libharfbuzz-icu0:i386 (2.3.1-1) ... Setting up libxpm4:i386 (1:3.5.12-1) ... Setting up python2.7 (2.7.16-2+deb10u1) ... Setting up libxrender1:i386 (1:0.9.10-1) ... Setting up libpython2-stdlib:i386 (2.7.16-1) ... Setting up fontconfig-config (2.13.1-2) ... Setting up libxext6:i386 (2:1.3.3-1+b2) ... Setting up libpaper-utils (1.1.28) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up python2 (2.7.16-1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up tex-common (6.11) ... update-language: texlive-base not installed and configured, doing nothing! Setting up libpython-stdlib:i386 (2.7.16-1) ... Setting up libxt6:i386 (1:1.1.5-1+b3) ... Setting up libcups2:i386 (2.2.10-6+deb10u2) ... Setting up libfontconfig1:i386 (2.13.1-2) ... Setting up python (2.7.16-1) ... Setting up fontconfig (2.13.1-2) ... Regenerating fonts cache... done. Setting up libxmu6:i386 (2:1.1.2-2+b3) ... Setting up libxi6:i386 (2:1.7.9-1) ... Setting up po-debconf (1.0.21) ... Setting up preview-latex-style (11.91-2) ... Setting up libpango-1.0-0:i386 (1.42.4-7~deb10u1) ... Setting up libxaw7:i386 (2:1.0.13-1+b2) ... Setting up libcairo2:i386 (1.16.0-4) ... Setting up libcupsimage2:i386 (2.2.10-6+deb10u2) ... Setting up libgd3:i386 (2.2.5-5.2) ... Setting up libpangoft2-1.0-0:i386 (1.42.4-7~deb10u1) ... Setting up libpangocairo-1.0-0:i386 (1.42.4-7~deb10u1) ... Setting up libgs9:i386 (9.27~dfsg-2+deb10u3) ... Setting up libgvc6 (2.40.1-6) ... Setting up texlive-binaries (2018.20181218.49446-1) ... update-alternatives: using /usr/bin/xdvi-xaw to provide /usr/bin/xdvi.bin (xdvi.bin) in auto mode update-alternatives: using /usr/bin/bibtex.original to provide /usr/bin/bibtex (bibtex) in auto mode Setting up texlive-base (2018.20190227-2) ... tl-paper: setting paper size for dvips to a4: /var/lib/texmf/dvips/config/config-paper.ps tl-paper: setting paper size for dvipdfmx to a4: /var/lib/texmf/dvipdfmx/dvipdfmx-paper.cfg tl-paper: setting paper size for xdvi to a4: /var/lib/texmf/xdvi/XDvi-paper tl-paper: setting paper size for pdftex to a4: /var/lib/texmf/tex/generic/config/pdftexconfig.tex Setting up graphviz (2.40.1-6) ... Setting up texlive-latex-base (2018.20190227-2) ... Setting up texlive-latex-recommended (2018.20190227-2) ... Setting up texlive-pictures (2018.20190227-2) ... Setting up texlive-fonts-recommended (2018.20190227-2) ... Setting up texlive-latex-extra (2018.20190227-2) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up debhelper (12.1.1) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for tex-common (6.11) ... Running updmap-sys. This may take some time... done. Running mktexlsr /var/lib/texmf ... done. Building format(s) --all. This may take some time... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/librostlab-blast-1.0.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package librostlab-blast dpkg-buildpackage: info: source version 1.0.1-10 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Tille dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/librostlab-blast-1.0.1' dh_auto_clean rm -f lib/librostlab-blast.tag make[1]: Leaving directory '/build/librostlab-blast-1.0.1' dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:7: installing './compile' configure.ac:5: installing './missing' lib/Makefile.am: installing './depcomp' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/librostlab-blast-1.0.1' dh_auto_configure -- --enable-doxygen-dot --enable-doxygen-pdf=No ./configure --build=i686-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu --libexecdir=\${prefix}/lib/i386-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --enable-doxygen-dot --enable-doxygen-pdf=No configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for bison... bison -y checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking rostlab/aux_functions.h usability... yes checking rostlab/aux_functions.h presence... yes checking for rostlab/aux_functions.h... yes checking rostlab/rostlab_stdexcept.h usability... yes checking rostlab/rostlab_stdexcept.h presence... yes checking for rostlab/rostlab_stdexcept.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl checking for dot... /usr/bin/dot checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating lib/Makefile config.status: creating lib/Doxyfile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-maintainer-mode make[1]: Leaving directory '/build/librostlab-blast-1.0.1' debian/rules override_dh_auto_build make[1]: Entering directory '/build/librostlab-blast-1.0.1' dh_auto_build make -j10 make[2]: Entering directory '/build/librostlab-blast-1.0.1' make all-recursive make[3]: Entering directory '/build/librostlab-blast-1.0.1' Making all in lib make[4]: Entering directory '/build/librostlab-blast-1.0.1/lib' mkdir -p rostlab /bin/bash ../ylwrap blast-parser-scanner.lpp lex.yy.c blast-parser-scanner.cpp -- flex /bin/bash ../ylwrap blast-parser-parser.ypp y.tab.c blast-parser-parser.cpp y.tab.h rostlab/blast-parser-parser.h y.output blast-parser-parser.output stack.hh rostlab/blast-parser-stack.h location.hh rostlab/blast-parser-location.h position.hh rostlab/blast-parser-position.h -- bison -y /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:1.1-9: warning: POSIX Yacc does not support %skeleton [-Wyacc] %skeleton "lalr1.cc" ^~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:1.11-20: warning: POSIX Yacc does not support string literals [-Wyacc] %skeleton "lalr1.cc" ^~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:20.1-8: warning: POSIX Yacc does not support %require [-Wyacc] %require "2.4.1" ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:20.10-16: warning: POSIX Yacc does not support string literals [-Wyacc] %require "2.4.1" ^~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:21.1-8: warning: POSIX Yacc does not support %defines [-Wyacc] %defines ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:22.1-7: warning: POSIX Yacc does not support %define [-Wyacc] %define namespace "rostlab::blast" ^~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:22.19-34: warning: POSIX Yacc does not support string literals [-Wyacc] %define namespace "rostlab::blast" ^~~~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:22.1-34: warning: deprecated directive, use '%define api.namespace {rostlab::blast}' [-Wdeprecated] %define namespace "rostlab::blast" ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:24.1-5: warning: POSIX Yacc does not support %code [-Wyacc] %code requires { ^~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:37.1-14: warning: POSIX Yacc does not support %error-verbose [-Wyacc] %error-verbose ^~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:37.1-14: warning: deprecated directive, use '%define parse.error verbose' [-Wdeprecated] %error-verbose ^~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:39.1-15: warning: POSIX Yacc does not support %initial-action [-Wyacc] %initial-action ^~~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:53.1-5: warning: POSIX Yacc does not support %code [-Wyacc] %code { ^~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:59.29-41: warning: POSIX Yacc does not support string literals [-Wyacc] %token END 0 "end of file" ^~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:72.29-36: warning: POSIX Yacc does not support string literals [-Wyacc] %token QUERYEQ "Query=" ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:73.29-39: warning: POSIX Yacc does not support string literals [-Wyacc] %token DATABASECOLON "Database:" ^~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:74.29-48: warning: POSIX Yacc does not support string literals [-Wyacc] %token RESFROMROUND "Results from round" ^~~~~~~~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:75.29-37: warning: POSIX Yacc does not support string literals [-Wyacc] %token SCOREEQ "Score =" ^~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:76.29-38: warning: POSIX Yacc does not support string literals [-Wyacc] %token EXPECTEQ "Expect =" ^~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:77.29-37: warning: POSIX Yacc does not support string literals [-Wyacc] %token METHODCOLON "Method:" ^~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:78.29-42: warning: POSIX Yacc does not support string literals [-Wyacc] %token IDENTITIESEQ "Identities =" ^~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:79.29-41: warning: POSIX Yacc does not support string literals [-Wyacc] %token POSITIVESEQ "Positives =" ^~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:80.29-36: warning: POSIX Yacc does not support string literals [-Wyacc] %token GAPSEQ "Gaps =" ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:81.29-38: warning: POSIX Yacc does not support string literals [-Wyacc] %token STRANDEQ "Strand =" ^~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:82.29-37: warning: POSIX Yacc does not support string literals [-Wyacc] %token FRAMEEQ "Frame =" ^~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:83.29-36: warning: POSIX Yacc does not support string literals [-Wyacc] %token QUERYCOLON "Query:" ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:84.29-36: warning: POSIX Yacc does not support string literals [-Wyacc] %token SBJCTCOLON "Sbjct:" ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:88.1-11: warning: POSIX Yacc does not support %destructor [-Wyacc] %destructor { delete $$; } ^~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:90.1-8: warning: POSIX Yacc does not support %printer [-Wyacc] %printer { debug_stream () << *$$; } ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:91.1-8: warning: POSIX Yacc does not support %printer [-Wyacc] %printer { debug_stream () << $$; } ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:109.9-16: warning: POSIX Yacc does not support string literals [-Wyacc] query: "Query=" STRING INT ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:122.11-21: warning: POSIX Yacc does not support string literals [-Wyacc] database: "Database:" STRING INT INT ^~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:137.15-34: warning: POSIX Yacc does not support string literals [-Wyacc] | "Results from round" INT ^~~~~~~~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:201.19-27: warning: POSIX Yacc does not support string literals [-Wyacc] hsp_headerfield: "Score =" num INT ^~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:203.19-28: warning: POSIX Yacc does not support string literals [-Wyacc] | "Expect =" num ^~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:205.19-27: warning: POSIX Yacc does not support string literals [-Wyacc] | "Method:" STRING ^~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:207.19-32: warning: POSIX Yacc does not support string literals [-Wyacc] | "Identities =" INT ^~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:209.19-31: warning: POSIX Yacc does not support string literals [-Wyacc] | "Positives =" INT ^~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:211.19-26: warning: POSIX Yacc does not support string literals [-Wyacc] | "Gaps =" INT ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:213.19-28: warning: POSIX Yacc does not support string literals [-Wyacc] | "Strand =" STRING '/' STRING ^~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:215.19-27: warning: POSIX Yacc does not support string literals [-Wyacc] | "Frame =" INT '/' INT ^~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:217.19-27: warning: POSIX Yacc does not support string literals [-Wyacc] | "Frame =" INT ^~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:224.15-22: warning: POSIX Yacc does not support string literals [-Wyacc] alitriple: "Query:" INT STRING INT STRING "Sbjct:" INT STRING INT ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:224.46-53: warning: POSIX Yacc does not support string literals [-Wyacc] alitriple: "Query:" INT STRING INT STRING "Sbjct:" INT STRING INT ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:247.15-22: warning: POSIX Yacc does not support string literals [-Wyacc] | "Query:" '0' /* bug as far as I can tell */ ^~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp:22.1-34: warning: %define variable 'api.namespace' requires '{...}' values [-Wdeprecated] %define namespace "rostlab::blast" ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /build/librostlab-blast-1.0.1/lib/blast-parser-parser.ypp: warning: fix-its can be applied. Rerun with option '--update'. [-Wother] updating rostlab/blast-parser-location.h updating rostlab/blast-parser-position.h updating rostlab/blast-parser-stack.h updating rostlab/blast-parser-parser.h sed -i -e 's,\by.tab.h\b,rostlab/blast-parser-parser.h,g' blast-parser-parser.cpp sed -i -e 's,\bstack.hh\b,rostlab/blast-parser-stack.h,g;s,\blocation.hh\b,rostlab/blast-parser-location.h,g;' rostlab/blast-parser-parser.h sed -i -e 's,\bposition.hh\b,rostlab/blast-parser-position.h,g;' rostlab/blast-parser-location.h make all-am make[5]: Entering directory '/build/librostlab-blast-1.0.1/lib' /bin/bash ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -c -o librostlab_blast_la-blast-parser-driver.lo `test -f 'blast-parser-driver.cpp' || echo './'`blast-parser-driver.cpp /bin/bash ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -c -o librostlab_blast_la-blast-parser-parser.lo `test -f 'blast-parser-parser.cpp' || echo './'`blast-parser-parser.cpp \ \ /bin/bash ../ylwrap `test -f 'blast-parser-scanner.lpp' || echo './'`blast-parser-scanner.lpp lex.yy.c librostlab_blast_la-blast-parser-scanner.cpp -- flex -Cfe libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -c blast-parser-parser.cpp -fPIC -DPIC -o .libs/librostlab_blast_la-blast-parser-parser.o libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -c blast-parser-driver.cpp -fPIC -DPIC -o .libs/librostlab_blast_la-blast-parser-driver.o /bin/bash ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -c -o librostlab_blast_la-librostlab_blast_la-blast-parser-scanner.lo `test -f 'librostlab_blast_la-blast-parser-scanner.cpp' || echo './'`librostlab_blast_la-blast-parser-scanner.cpp libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -c librostlab_blast_la-blast-parser-scanner.cpp -fPIC -DPIC -o .libs/librostlab_blast_la-librostlab_blast_la-blast-parser-scanner.o libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -c blast-parser-driver.cpp -o librostlab_blast_la-blast-parser-driver.o >/dev/null 2>&1 libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -c blast-parser-parser.cpp -o librostlab_blast_la-blast-parser-parser.o >/dev/null 2>&1 libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -c librostlab_blast_la-blast-parser-scanner.cpp -o librostlab_blast_la-librostlab_blast_la-blast-parser-scanner.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CXX --mode=link g++ -Wall -g -O2 -ffile-prefix-map=/build/librostlab-blast-1.0.1=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++03 -version-info 0:0:0 -Wall -Wl,-z,relro -Wl,-z,now -o librostlab-blast.la -rpath /usr/lib/i386-linux-gnu librostlab_blast_la-blast-parser-driver.lo librostlab_blast_la-blast-parser-parser.lo librostlab_blast_la-librostlab_blast_la-blast-parser-scanner.lo libtool: link: g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/i686-linux-gnu/8/../../../i386-linux-gnu/crti.o /usr/lib/gcc/i686-linux-gnu/8/crtbeginS.o .libs/librostlab_blast_la-blast-parser-driver.o .libs/librostlab_blast_la-blast-parser-parser.o .libs/librostlab_blast_la-librostlab_blast_la-blast-parser-scanner.o -L/usr/lib/gcc/i686-linux-gnu/8 -L/usr/lib/gcc/i686-linux-gnu/8/../../../i386-linux-gnu -L/usr/lib/gcc/i686-linux-gnu/8/../../../../lib -L/lib/i386-linux-gnu -L/lib/../lib -L/usr/lib/i386-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/i686-linux-gnu/8/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/i686-linux-gnu/8/crtendS.o /usr/lib/gcc/i686-linux-gnu/8/../../../i386-linux-gnu/crtn.o -g -O2 -fstack-protector-strong -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-soname -Wl,librostlab-blast.so.0 -o .libs/librostlab-blast.so.0.0.0 libtool: link: (cd ".libs" && rm -f "librostlab-blast.so.0" && ln -s "librostlab-blast.so.0.0.0" "librostlab-blast.so.0") libtool: link: (cd ".libs" && rm -f "librostlab-blast.so" && ln -s "librostlab-blast.so.0.0.0" "librostlab-blast.so") libtool: link: ar cru .libs/librostlab-blast.a librostlab_blast_la-blast-parser-driver.o librostlab_blast_la-blast-parser-parser.o librostlab_blast_la-librostlab_blast_la-blast-parser-scanner.o ar: `u' modifier ignored since `D' is the default (see `U') libtool: link: ranlib .libs/librostlab-blast.a libtool: link: ( cd ".libs" && rm -f "librostlab-blast.la" && ln -s "../librostlab-blast.la" "librostlab-blast.la" ) make[5]: Leaving directory '/build/librostlab-blast-1.0.1/lib' make[4]: Leaving directory '/build/librostlab-blast-1.0.1/lib' make[4]: Entering directory '/build/librostlab-blast-1.0.1' make[4]: Leaving directory '/build/librostlab-blast-1.0.1' make[3]: Leaving directory '/build/librostlab-blast-1.0.1' make[2]: Leaving directory '/build/librostlab-blast-1.0.1' /usr/bin/make -C lib doxygen-doc make[2]: Entering directory '/build/librostlab-blast-1.0.1/lib' rm -rf ../doxygen-doc SRCDIR='.' PROJECT='librostlab-blast' DOCDIR='../doxygen-doc' VERSION='1.0.1' PERL_PATH='/usr/bin/perl' HAVE_DOT='YES' DOT_PATH='/usr/bin' GENERATE_MAN='NO' GENERATE_RTF='NO' GENERATE_XML='NO' GENERATE_HTMLHELP='NO' GENERATE_CHI='NO' GENERATE_HTML='YES' GENERATE_LATEX='NO' /usr/bin/doxygen ./Doxyfile warning: Tag `SYMBOL_CACHE_SIZE' at line 290 of file `./Doxyfile' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: Tag `SHOW_DIRECTORIES' at line 490 of file `./Doxyfile' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: Tag `HTML_ALIGN_MEMBERS' at line 847 of file `./Doxyfile' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: Tag `USE_INLINE_TREES' at line 1032 of file `./Doxyfile' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: Tag `XML_SCHEMA' at line 1257 of file `./Doxyfile' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: Tag `XML_DTD' at line 1263 of file `./Doxyfile' has become obsolete. To avoid this warning please remove this line from your configuration file or upgrade it using "doxygen -u" warning: doxygen no longer ships with the FreeSans font. You may want to clear or change DOT_FONTNAME. Otherwise you run the risk that the wrong font is being used for dot generated graphs. error: Tag file `/usr/share/doc/librostlab-doc/librostlab.tag' does not exist or is not a file. Skipping it... /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-location.h:34: warning: the name `location.hh' supplied as the second argument in the \file statement is not an input file /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-parser.h:35: warning: the name `y.tab.h' supplied as the second argument in the \file statement is not an input file Notice: Output directory `../doxygen-doc' does not exist. I have created it for you. Searching for include files... Searching for example files... Searching for files in directory /build/librostlab-blast-1.0.1/examples Searching for images... Searching for dot files... Searching for msc files... Searching for dia files... Searching for files to exclude Searching INPUT for files to process... Searching for files in directory /build/librostlab-blast-1.0.1/lib/rostlab Reading and parsing tag files Parsing files Preprocessing /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-driver.h... Parsing file /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-driver.h... Preprocessing /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-location.h... Parsing file /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-location.h... Preprocessing /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-parser.h... Parsing file /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-parser.h... Preprocessing /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-position.h... Parsing file /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-position.h... Preprocessing /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-stack.h... Parsing file /build/librostlab-blast-1.0.1/lib/rostlab/blast-parser-stack.h... Preprocessing /build/librostlab-blast-1.0.1/lib/rostlab/blast-result.h... Parsing file /build/librostlab-blast-1.0.1/lib/rostlab/blast-result.h... Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating code for file rostlab/blast-parser-driver.h... Generating code for file rostlab/blast-parser-location.h... Generating code for file rostlab/blast-parser-parser.h... Generating code for file rostlab/blast-parser-position.h... Generating code for file rostlab/blast-parser-stack.h... Generating code for file rostlab/blast-result.h... Generating file documentation... Generating docs for file rostlab/blast-parser-driver.h... Generating docs for file rostlab/blast-parser-location.h... Generating docs for file rostlab/blast-parser-parser.h... Generating docs for file rostlab/blast-parser-position.h... Generating docs for file rostlab/blast-parser-stack.h... Generating docs for file rostlab/blast-result.h... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating docs for namespace rostlab Generating docs for namespace rostlab::blast Generating docs for compound rostlab::blast::hit... Generating docs for compound rostlab::blast::hsp... Generating docs for compound rostlab::blast::location... Generating docs for compound rostlab::blast::oneline... Generating docs for compound rostlab::blast::parser... Generating docs for nested compound rostlab::blast::parser::basic_symbol... Generating docs for nested compound rostlab::blast::parser::by_type... Generating docs for nested compound rostlab::blast::parser::semantic_type... Generating docs for nested compound rostlab::blast::parser::stack::slice... Generating docs for nested compound rostlab::blast::parser::symbol_type... Generating docs for nested compound rostlab::blast::parser::syntax_error... Generating docs for nested compound rostlab::blast::parser::token... Generating docs for compound rostlab::blast::parser_driver... Generating docs for compound rostlab::blast::parser_error... Generating docs for compound rostlab::blast::position... Generating docs for compound rostlab::blast::result... Generating docs for compound rostlab::blast::round... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating graphical class hierarchy... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... Running dot... Generating dot graphs using 11 parallel threads... Running dot for graph 1/54 Running dot for graph 2/54 Running dot for graph 3/54 Running dot for graph 4/54 Running dot for graph 5/54 Running dot for graph 6/54 Running dot for graph 7/54 Running dot for graph 8/54 Running dot for graph 9/54 Running dot for graph 10/54 Running dot for graph 11/54 Running dot for graph 12/54 Running dot for graph 13/54 Running dot for graph 14/54 Running dot for graph 15/54 Running dot for graph 16/54 Running dot for graph 17/54 Running dot for graph 18/54 Running dot for graph 19/54 Running dot for graph 20/54 Running dot for graph 21/54 Running dot for graph 22/54 Running dot for graph 23/54 Running dot for graph 24/54 Running dot for graph 25/54 Running dot for graph 26/54 Running dot for graph 27/54 Running dot for graph 28/54 Running dot for graph 29/54 Running dot for graph 30/54 Running dot for graph 31/54 Running dot for graph 32/54 Running dot for graph 33/54 Running dot for graph 34/54 Running dot for graph 35/54 Running dot for graph 36/54 Running dot for graph 37/54 Running dot for graph 38/54 Running dot for graph 39/54 Running dot for graph 40/54 Running dot for graph 41/54 Running dot for graph 42/54 Running dot for graph 43/54 Running dot for graph 44/54 Running dot for graph 45/54 Running dot for graph 46/54 Running dot for graph 47/54 Running dot for graph 48/54 Running dot for graph 49/54 Running dot for graph 50/54 Running dot for graph 51/54 Running dot for graph 52/54 Running dot for graph 53/54 Running dot for graph 54/54 Patching output file 1/23 Patching output file 2/23 Patching output file 3/23 Patching output file 4/23 Patching output file 5/23 Patching output file 6/23 Patching output file 7/23 Patching output file 8/23 Patching output file 9/23 Patching output file 10/23 Patching output file 11/23 Patching output file 12/23 Patching output file 13/23 Patching output file 14/23 Patching output file 15/23 Patching output file 16/23 Patching output file 17/23 Patching output file 18/23 Patching output file 19/23 Patching output file 20/23 Patching output file 21/23 Patching output file 22/23 Patching output file 23/23 lookup cache used 541/65536 hits=4560 misses=586 finished... make[2]: Leaving directory '/build/librostlab-blast-1.0.1/lib' make[1]: Leaving directory '/build/librostlab-blast-1.0.1' dh_auto_test make -j10 check VERBOSE=1 make[1]: Entering directory '/build/librostlab-blast-1.0.1' Making check in lib make[2]: Entering directory '/build/librostlab-blast-1.0.1/lib' make check-am make[3]: Entering directory '/build/librostlab-blast-1.0.1/lib' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/librostlab-blast-1.0.1/lib' make[2]: Leaving directory '/build/librostlab-blast-1.0.1/lib' make[2]: Entering directory '/build/librostlab-blast-1.0.1' make[2]: Leaving directory '/build/librostlab-blast-1.0.1' make[1]: Leaving directory '/build/librostlab-blast-1.0.1' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/librostlab-blast-1.0.1/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/librostlab-blast-1.0.1' Making install in lib make[2]: Entering directory '/build/librostlab-blast-1.0.1/lib' make install-am make[3]: Entering directory '/build/librostlab-blast-1.0.1/lib' make[4]: Entering directory '/build/librostlab-blast-1.0.1/lib' /bin/mkdir -p '/build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu' /bin/bash ../libtool --mode=install /usr/bin/install -c librostlab-blast.la '/build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu' libtool: install: /usr/bin/install -c .libs/librostlab-blast.so.0.0.0 /build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu/librostlab-blast.so.0.0.0 libtool: install: (cd /build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu && { ln -s -f librostlab-blast.so.0.0.0 librostlab-blast.so.0 || { rm -f librostlab-blast.so.0 && ln -s librostlab-blast.so.0.0.0 librostlab-blast.so.0; }; }) libtool: install: (cd /build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu && { ln -s -f librostlab-blast.so.0.0.0 librostlab-blast.so || { rm -f librostlab-blast.so && ln -s librostlab-blast.so.0.0.0 librostlab-blast.so; }; }) libtool: install: /usr/bin/install -c .libs/librostlab-blast.lai /build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu/librostlab-blast.la libtool: install: /usr/bin/install -c .libs/librostlab-blast.a /build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu/librostlab-blast.a libtool: install: chmod 644 /build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu/librostlab-blast.a libtool: install: ranlib /build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu/librostlab-blast.a libtool: warning: remember to run 'libtool --finish /usr/lib/i386-linux-gnu' /bin/mkdir -p '/build/librostlab-blast-1.0.1/debian/tmp/usr/include/rostlab' /usr/bin/install -c -m 644 rostlab/blast-parser-driver.h rostlab/blast-result.h '/build/librostlab-blast-1.0.1/debian/tmp/usr/include/rostlab' /bin/mkdir -p '/build/librostlab-blast-1.0.1/debian/tmp/usr/include/rostlab' /usr/bin/install -c -m 644 rostlab/blast-parser-location.h rostlab/blast-parser-parser.h rostlab/blast-parser-position.h rostlab/blast-parser-stack.h '/build/librostlab-blast-1.0.1/debian/tmp/usr/include/rostlab' make[4]: Leaving directory '/build/librostlab-blast-1.0.1/lib' make[3]: Leaving directory '/build/librostlab-blast-1.0.1/lib' make[2]: Leaving directory '/build/librostlab-blast-1.0.1/lib' make[2]: Entering directory '/build/librostlab-blast-1.0.1' make[3]: Entering directory '/build/librostlab-blast-1.0.1' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/librostlab-blast-1.0.1/debian/tmp/usr/share/doc/librostlab-blast/examples' /usr/bin/install -c -m 644 examples/converged.ali examples/parseblast.cpp '/build/librostlab-blast-1.0.1/debian/tmp/usr/share/doc/librostlab-blast/examples' make[3]: Leaving directory '/build/librostlab-blast-1.0.1' make[2]: Leaving directory '/build/librostlab-blast-1.0.1' make[1]: Leaving directory '/build/librostlab-blast-1.0.1' debian/rules override_dh_install make[1]: Entering directory '/build/librostlab-blast-1.0.1' d-shlibmove --commit \ --multiarch \ --exclude-la \ --v5 \ --movedev debian/tmp/usr/include/* usr/include \ debian/tmp/usr/lib/*/*.so Library package automatic movement utility set -e install -d -m 755 debian/librostlab-blast0-dev/usr/lib/i386-linux-gnu install -d -m 755 debian/librostlab-blast0v5/usr/lib/i386-linux-gnu mv debian/tmp/usr/lib/i386-linux-gnu/librostlab-blast.a debian/librostlab-blast0-dev/usr/lib/i386-linux-gnu mv debian/tmp/usr/lib/i386-linux-gnu/librostlab-blast.so debian/librostlab-blast0-dev/usr/lib/i386-linux-gnu mv /build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu/librostlab-blast.so.0 debian/librostlab-blast0v5/usr/lib/i386-linux-gnu mv /build/librostlab-blast-1.0.1/debian/tmp/usr/lib/i386-linux-gnu/librostlab-blast.so.0.0.0 debian/librostlab-blast0v5/usr/lib/i386-linux-gnu PKGDEV=librostlab-blast0-dev PKGSHL=librostlab-blast0v5 install -d -m 755 debian/librostlab-blast0-dev/usr/include mv debian/tmp/usr/include/rostlab debian/librostlab-blast0-dev/usr/include make[1]: Leaving directory '/build/librostlab-blast-1.0.1' debian/rules override_dh_installdocs make[1]: Entering directory '/build/librostlab-blast-1.0.1' dh_installdocs dh_installdocs: Cannot auto-detect main package for librostlab-blast-doc. If the default is wrong, please use --doc-main-package find debian -name "*.md5" -delete make[1]: Leaving directory '/build/librostlab-blast-1.0.1' dh_installchangelogs dh_installexamples dh_lintian dh_perl debian/rules override_dh_link make[1]: Entering directory '/build/librostlab-blast-1.0.1' find debian -name jquery.js -delete dh_link make[1]: Leaving directory '/build/librostlab-blast-1.0.1' dh_strip_nondeterminism debian/rules override_dh_compress make[1]: Entering directory '/build/librostlab-blast-1.0.1' dh_compress -Xlibrostlab-blast.tag make[1]: Leaving directory '/build/librostlab-blast-1.0.1' dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dpkg-gencontrol: warning: Depends field of package librostlab-blast-doc: substitution variable ${shlibs:Depends} used, but is not defined dh_md5sums dh_builddeb dpkg-deb: building package 'librostlab-blast-doc' in '../librostlab-blast-doc_1.0.1-10_all.deb'. dpkg-deb: building package 'librostlab-blast0v5-dbgsym' in '../librostlab-blast0v5-dbgsym_1.0.1-10_i386.deb'. dpkg-deb: building package 'librostlab-blast0-dev' in '../librostlab-blast0-dev_1.0.1-10_i386.deb'. dpkg-deb: building package 'librostlab-blast0v5' in '../librostlab-blast0v5_1.0.1-10_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../librostlab-blast_1.0.1-10_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/29883 and its subdirectories I: Current time: Thu Mar 26 17:46:41 -12 2020 I: pbuilder-time-stamp: 1585288001