I: pbuilder: network access will be disabled during build I: Current time: Fri May 14 15:34:40 -12 2021 I: pbuilder-time-stamp: 1621049680 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [ibus-anthy_1.5.10-2.dsc] I: copying [./ibus-anthy_1.5.10.orig.tar.gz] I: copying [./ibus-anthy_1.5.10-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Wed Dec 5 03:45:14 2018 -12 gpgv: using RSA key 7E7729476D87D6F11D91ACCBC293E7B461825ACE gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./ibus-anthy_1.5.10-2.dsc dpkg-source: info: extracting ibus-anthy in ibus-anthy-1.5.10 dpkg-source: info: unpacking ibus-anthy_1.5.10.orig.tar.gz dpkg-source: info: unpacking ibus-anthy_1.5.10-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-read-utf-8-encoded-zipfile.patch dpkg-source: info: applying 0002-engine-Load-HOME-.XCompose-file.patch dpkg-source: info: applying 0003-tests-Fixed-some-errors-in-the-Makefile-script.patch dpkg-source: info: applying 0004-tests-Added-GTK_IM_MODULE-ibus.patch dpkg-source: info: applying 0005-tests-Enabled-tests-on-console.patch dpkg-source: info: applying 0006-engine-input-mode-should-be-changed-even-if-the-mode.patch dpkg-source: info: applying 0007-configure-Replaced-AC_PROG_LIBTOOL-with-LT_INIT.patch dpkg-source: info: applying 0008-Makefile.am-Install-appdata-files-into-metainfo-dir.patch I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 11~), dh-python, gir1.2-ibus-1.0 (>= 1.5), gobject-introspection, intltool, libanthy-dev (>= 1:0.3-6), libgirepository1.0-dev, libglib2.0-dev, pkg-config, python3-dev, python3-gi dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 11~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on gir1.2-ibus-1.0 (>= 1.5); however: Package gir1.2-ibus-1.0 is not installed. pbuilder-satisfydepends-dummy depends on gobject-introspection; however: Package gobject-introspection is not installed. pbuilder-satisfydepends-dummy depends on intltool; however: Package intltool is not installed. pbuilder-satisfydepends-dummy depends on libanthy-dev (>= 1:0.3-6); however: Package libanthy-dev is not installed. pbuilder-satisfydepends-dummy depends on libgirepository1.0-dev; however: Package libgirepository1.0-dev is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on python3-dev; however: Package python3-dev is not installed. pbuilder-satisfydepends-dummy depends on python3-gi; however: Package python3-gi is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: anthy-common{a} autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} fontconfig-config{a} fonts-dejavu-core{a} gettext{a} gettext-base{a} gir1.2-freedesktop{a} gir1.2-glib-2.0{a} gir1.2-ibus-1.0{a} gobject-introspection{a} groff-base{a} intltool{a} intltool-debian{a} libanthy-dev{a} libanthy1{a} libarchive-zip-perl{a} libblkid-dev{a} libbsd0{a} libcairo-gobject2{a} libcairo2{a} libcroco3{a} libelf1{a} libencode-locale-perl{a} libexpat1{a} libexpat1-dev{a} libffi-dev{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libfontconfig1{a} libfreetype6{a} libgirepository-1.0-1{a} libgirepository1.0-dev{a} libglib2.0-0{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libibus-1.0-5{a} libicu63{a} libio-html-perl{a} libio-socket-ssl-perl{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1{a} libmount-dev{a} libmpdec2{a} libncurses6{a} libnet-http-perl{a} libnet-ssleay-perl{a} libpcre16-3{a} libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpipeline1{a} libpixman-1-0{a} libpng16-16{a} libpython3-dev{a} libpython3-stdlib{a} libpython3.7{a} libpython3.7-dev{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libselinux1-dev{a} libsepol1-dev{a} libsigsegv2{a} libssl1.1{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libx11-6{a} libx11-data{a} libxau6{a} libxcb-render0{a} libxcb-shm0{a} libxcb1{a} libxdmcp6{a} libxext6{a} libxml-parser-perl{a} libxml2{a} libxrender1{a} m4{a} man-db{a} mime-support{a} netbase{a} openssl{a} perl-openssl-defaults{a} pkg-config{a} po-debconf{a} python3{a} python3-dev{a} python3-distutils{a} python3-gi{a} python3-lib2to3{a} python3-mako{a} python3-markdown{a} python3-markupsafe{a} python3-minimal{a} python3-pkg-resources{a} python3.7{a} python3.7-dev{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} ucf{a} uuid-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl kasumi libarchive-cpio-perl libdata-dump-perl libgpm2 libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libltdl-dev libmail-sendmail-perl libmailtools-perl lynx python3-pygments python3-yaml shared-mime-info wget xdg-user-dirs 0 packages upgraded, 130 newly installed, 0 to remove and 0 not upgraded. Need to get 98.4 MB of archives. After unpacking 270 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 libssl1.1 i386 1.1.1d-0+deb10u2 [1538 kB] Get: 8 http://deb.debian.org/debian buster/main i386 libpython3.7-minimal i386 3.7.3-2+deb10u1 [590 kB] Get: 9 http://deb.debian.org/debian buster/main i386 libexpat1 i386 2.2.6-2+deb10u1 [104 kB] Get: 10 http://deb.debian.org/debian buster/main i386 python3.7-minimal i386 3.7.3-2+deb10u1 [1745 kB] Get: 11 http://deb.debian.org/debian buster/main i386 python3-minimal i386 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main i386 mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main i386 libmpdec2 i386 2.4.2-2 [83.2 kB] Get: 14 http://deb.debian.org/debian buster/main i386 readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main i386 libreadline7 i386 7.0-5 [156 kB] Get: 16 http://deb.debian.org/debian buster/main i386 libpython3.7-stdlib i386 3.7.3-2+deb10u1 [1750 kB] Get: 17 http://deb.debian.org/debian buster/main i386 python3.7 i386 3.7.3-2+deb10u1 [330 kB] Get: 18 http://deb.debian.org/debian buster/main i386 libpython3-stdlib i386 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main i386 python3 i386 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main i386 netbase all 5.6 [19.4 kB] Get: 21 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 22 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 23 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 24 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 25 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 26 http://deb.debian.org/debian buster/main i386 ucf all 3.0038+nmu1 [69.0 kB] Get: 27 http://deb.debian.org/debian buster/main i386 anthy-common all 1:0.3-8.1 [5564 kB] Get: 28 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 29 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 30 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 31 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 32 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 33 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 34 http://deb.debian.org/debian buster/main i386 openssl i386 1.1.1d-0+deb10u2 [853 kB] Get: 35 http://deb.debian.org/debian buster/main i386 ca-certificates all 20190110 [157 kB] Get: 36 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 37 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 38 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 39 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 40 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 41 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 42 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 43 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 44 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6 [8443 kB] Get: 45 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 46 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 47 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 48 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 49 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 50 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 51 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 52 http://deb.debian.org/debian buster/main i386 python3-lib2to3 all 3.7.3-1 [76.7 kB] Get: 53 http://deb.debian.org/debian buster/main i386 python3-distutils all 3.7.3-1 [142 kB] Get: 54 http://deb.debian.org/debian buster/main i386 dh-python all 3.20190308 [99.3 kB] Get: 55 http://deb.debian.org/debian buster/main i386 fonts-dejavu-core all 2.37-1 [1068 kB] Get: 56 http://deb.debian.org/debian buster/main i386 fontconfig-config all 2.13.1-2 [280 kB] Get: 57 http://deb.debian.org/debian buster/main i386 libgirepository-1.0-1 i386 1.58.3-2 [99.9 kB] Get: 58 http://deb.debian.org/debian buster/main i386 gir1.2-glib-2.0 i386 1.58.3-2 [143 kB] Get: 59 http://deb.debian.org/debian buster/main i386 libpng16-16 i386 1.6.36-6 [301 kB] Get: 60 http://deb.debian.org/debian buster/main i386 libfreetype6 i386 2.9.1-3+deb10u1 [395 kB] Get: 61 http://deb.debian.org/debian buster/main i386 libfontconfig1 i386 2.13.1-2 [357 kB] Get: 62 http://deb.debian.org/debian buster/main i386 libpixman-1-0 i386 0.36.0-1 [541 kB] Get: 63 http://deb.debian.org/debian buster/main i386 libxau6 i386 1:1.0.8-1+b2 [20.3 kB] Get: 64 http://deb.debian.org/debian buster/main i386 libxdmcp6 i386 1:1.1.2-3 [26.7 kB] Get: 65 http://deb.debian.org/debian buster/main i386 libxcb1 i386 1.13.1-2 [141 kB] Get: 66 http://deb.debian.org/debian buster/main i386 libx11-data all 2:1.6.7-1 [298 kB] Get: 67 http://deb.debian.org/debian buster/main i386 libx11-6 i386 2:1.6.7-1 [778 kB] Get: 68 http://deb.debian.org/debian buster/main i386 libxcb-render0 i386 1.13.1-2 [110 kB] Get: 69 http://deb.debian.org/debian buster/main i386 libxcb-shm0 i386 1.13.1-2 [99.4 kB] Get: 70 http://deb.debian.org/debian buster/main i386 libxext6 i386 2:1.3.3-1+b2 [55.2 kB] Get: 71 http://deb.debian.org/debian buster/main i386 libxrender1 i386 1:0.9.10-1 [34.1 kB] Get: 72 http://deb.debian.org/debian buster/main i386 libcairo2 i386 1.16.0-4 [744 kB] Get: 73 http://deb.debian.org/debian buster/main i386 libcairo-gobject2 i386 1.16.0-4 [124 kB] Get: 74 http://deb.debian.org/debian buster/main i386 gir1.2-freedesktop i386 1.58.3-2 [20.3 kB] Get: 75 http://deb.debian.org/debian buster/main i386 libibus-1.0-5 i386 1.5.19-4+deb10u1 [377 kB] Get: 76 http://deb.debian.org/debian buster/main i386 gir1.2-ibus-1.0 i386 1.5.19-4+deb10u1 [294 kB] Get: 77 http://deb.debian.org/debian buster/main i386 python3-markupsafe i386 1.1.0-1 [15.0 kB] Get: 78 http://deb.debian.org/debian buster/main i386 python3-mako all 1.0.7+ds1-1 [61.5 kB] Get: 79 http://deb.debian.org/debian buster/main i386 python3-pkg-resources all 40.8.0-1 [153 kB] Get: 80 http://deb.debian.org/debian buster/main i386 python3-markdown all 3.0.1-3 [59.4 kB] Get: 81 http://deb.debian.org/debian buster/main i386 gobject-introspection i386 1.58.3-2 [298 kB] Get: 82 http://deb.debian.org/debian buster/main i386 liburi-perl all 1.76-1 [89.9 kB] Get: 83 http://deb.debian.org/debian buster/main i386 libencode-locale-perl all 1.05-1 [13.7 kB] Get: 84 http://deb.debian.org/debian buster/main i386 libtimedate-perl all 2.3000-2+deb10u1 [38.1 kB] Get: 85 http://deb.debian.org/debian buster/main i386 libhttp-date-perl all 6.02-1 [10.7 kB] Get: 86 http://deb.debian.org/debian buster/main i386 libfile-listing-perl all 6.04-1 [10.3 kB] Get: 87 http://deb.debian.org/debian buster/main i386 libhtml-tagset-perl all 3.20-3 [12.7 kB] Get: 88 http://deb.debian.org/debian buster/main i386 libhtml-parser-perl i386 3.72-3+b3 [106 kB] Get: 89 http://deb.debian.org/debian buster/main i386 libhtml-tree-perl all 5.07-2 [213 kB] Get: 90 http://deb.debian.org/debian buster/main i386 libio-html-perl all 1.001-1 [17.6 kB] Get: 91 http://deb.debian.org/debian buster/main i386 liblwp-mediatypes-perl all 6.02-1 [22.1 kB] Get: 92 http://deb.debian.org/debian buster/main i386 libhttp-message-perl all 6.18-1 [77.8 kB] Get: 93 http://deb.debian.org/debian buster/main i386 libhttp-cookies-perl all 6.04-1 [17.8 kB] Get: 94 http://deb.debian.org/debian buster/main i386 libhttp-negotiate-perl all 6.01-1 [12.8 kB] Get: 95 http://deb.debian.org/debian buster/main i386 perl-openssl-defaults i386 3 [6782 B] Get: 96 http://deb.debian.org/debian buster/main i386 libnet-ssleay-perl i386 1.85-2+b1 [314 kB] Get: 97 http://deb.debian.org/debian buster/main i386 libio-socket-ssl-perl all 2.060-3 [207 kB] Get: 98 http://deb.debian.org/debian buster/main i386 libnet-http-perl all 6.18-1 [24.5 kB] Get: 99 http://deb.debian.org/debian buster/main i386 liblwp-protocol-https-perl all 6.07-2 [9242 B] Get: 100 http://deb.debian.org/debian buster/main i386 libtry-tiny-perl all 0.30-1 [23.3 kB] Get: 101 http://deb.debian.org/debian buster/main i386 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 102 http://deb.debian.org/debian buster/main i386 libwww-perl all 6.36-2 [188 kB] Get: 103 http://deb.debian.org/debian buster/main i386 libxml-parser-perl i386 2.44-4 [217 kB] Get: 104 http://deb.debian.org/debian buster/main i386 intltool all 0.51.0-5 [50.2 kB] Get: 105 http://deb.debian.org/debian buster/main i386 libanthy1 i386 1:0.3-8.1 [114 kB] Get: 106 http://deb.debian.org/debian buster/main i386 libanthy-dev i386 1:0.3-8.1 [124 kB] Get: 107 http://deb.debian.org/debian buster/main i386 uuid-dev i386 2.33.1-0.1 [94.0 kB] Get: 108 http://deb.debian.org/debian buster/main i386 libblkid-dev i386 2.33.1-0.1 [247 kB] Get: 109 http://deb.debian.org/debian buster/main i386 libexpat1-dev i386 2.2.6-2+deb10u1 [156 kB] Get: 110 http://deb.debian.org/debian buster/main i386 libffi-dev i386 3.2.1-9 [156 kB] Get: 111 http://deb.debian.org/debian buster/main i386 libglib2.0-data all 2.58.3-2+deb10u2 [1110 kB] Get: 112 http://deb.debian.org/debian buster/main i386 libglib2.0-bin i386 2.58.3-2+deb10u2 [129 kB] Get: 113 http://deb.debian.org/debian buster/main i386 libglib2.0-dev-bin i386 2.58.3-2+deb10u2 [158 kB] Get: 114 http://deb.debian.org/debian buster/main i386 libmount-dev i386 2.33.1-0.1 [252 kB] Get: 115 http://deb.debian.org/debian buster/main i386 libpcre16-3 i386 2:8.39-12 [258 kB] Get: 116 http://deb.debian.org/debian buster/main i386 libpcre32-3 i386 2:8.39-12 [250 kB] Get: 117 http://deb.debian.org/debian buster/main i386 libpcrecpp0v5 i386 2:8.39-12 [153 kB] Get: 118 http://deb.debian.org/debian buster/main i386 libpcre3-dev i386 2:8.39-12 [656 kB] Get: 119 http://deb.debian.org/debian buster/main i386 libsepol1-dev i386 2.8-1 [370 kB] Get: 120 http://deb.debian.org/debian buster/main i386 libselinux1-dev i386 2.8-1+b1 [177 kB] Get: 121 http://deb.debian.org/debian buster/main i386 pkg-config i386 0.29-6 [64.7 kB] Get: 122 http://deb.debian.org/debian buster/main i386 zlib1g-dev i386 1:1.2.11.dfsg-1 [216 kB] Get: 123 http://deb.debian.org/debian buster/main i386 libglib2.0-dev i386 2.58.3-2+deb10u2 [1597 kB] Get: 124 http://deb.debian.org/debian buster/main i386 libgirepository1.0-dev i386 1.58.3-2 [712 kB] Get: 125 http://deb.debian.org/debian buster/main i386 libpython3.7 i386 3.7.3-2+deb10u1 [1506 kB] Get: 126 http://deb.debian.org/debian buster/main i386 libpython3.7-dev i386 3.7.3-2+deb10u1 [47.7 MB] Get: 127 http://deb.debian.org/debian buster/main i386 libpython3-dev i386 3.7.3-1 [20.2 kB] Get: 128 http://deb.debian.org/debian buster/main i386 python3.7-dev i386 3.7.3-2+deb10u1 [509 kB] Get: 129 http://deb.debian.org/debian buster/main i386 python3-dev i386 3.7.3-1 [1260 B] Get: 130 http://deb.debian.org/debian buster/main i386 python3-gi i386 3.30.4-1 [191 kB] Fetched 98.4 MB in 1s (73.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../2-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../4-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:i386. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u2_i386.deb ... Unpacking libssl1.1:i386 (1.1.1d-0+deb10u2) ... Selecting previously unselected package libpython3.7-minimal:i386. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u1_i386.deb ... Unpacking libpython3.7-minimal:i386 (3.7.3-2+deb10u1) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_i386.deb ... Unpacking libexpat1:i386 (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u1_i386.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u1) ... Setting up libssl1.1:i386 (1.1.1d-0+deb10u2) ... Setting up libpython3.7-minimal:i386 (3.7.3-2+deb10u1) ... Setting up libexpat1:i386 (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20126 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_i386.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:i386. Preparing to unpack .../2-libmpdec2_2.4.2-2_i386.deb ... Unpacking libmpdec2:i386 (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:i386. Preparing to unpack .../4-libreadline7_7.0-5_i386.deb ... Unpacking libreadline7:i386 (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:i386. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u1_i386.deb ... Unpacking libpython3.7-stdlib:i386 (3.7.3-2+deb10u1) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u1_i386.deb ... Unpacking python3.7 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3-stdlib:i386. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_i386.deb ... Unpacking libpython3-stdlib:i386 (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20587 files and directories currently installed.) Preparing to unpack .../000-python3_3.7.3-1_i386.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package netbase. Preparing to unpack .../001-netbase_5.6_all.deb ... Unpacking netbase (5.6) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../002-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../003-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../004-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../005-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../006-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package ucf. Preparing to unpack .../007-ucf_3.0038+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0038+nmu1) ... Selecting previously unselected package anthy-common. Preparing to unpack .../008-anthy-common_1%3a0.3-8.1_all.deb ... Unpacking anthy-common (1:0.3-8.1) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../009-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../010-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../011-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../012-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../013-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../014-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package openssl. Preparing to unpack .../015-openssl_1.1.1d-0+deb10u2_i386.deb ... Unpacking openssl (1.1.1d-0+deb10u2) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../016-ca-certificates_20190110_all.deb ... Unpacking ca-certificates (20190110) ... Selecting previously unselected package libtool. Preparing to unpack .../017-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../018-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../019-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../020-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../021-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../022-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../023-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../024-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../025-libicu63_63.1-6_i386.deb ... Unpacking libicu63:i386 (63.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../026-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../027-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../028-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../029-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../030-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../031-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../032-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../033-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../034-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../035-dh-python_3.20190308_all.deb ... Unpacking dh-python (3.20190308) ... Selecting previously unselected package fonts-dejavu-core. Preparing to unpack .../036-fonts-dejavu-core_2.37-1_all.deb ... Unpacking fonts-dejavu-core (2.37-1) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../037-fontconfig-config_2.13.1-2_all.deb ... Unpacking fontconfig-config (2.13.1-2) ... Selecting previously unselected package libgirepository-1.0-1:i386. Preparing to unpack .../038-libgirepository-1.0-1_1.58.3-2_i386.deb ... Unpacking libgirepository-1.0-1:i386 (1.58.3-2) ... Selecting previously unselected package gir1.2-glib-2.0:i386. Preparing to unpack .../039-gir1.2-glib-2.0_1.58.3-2_i386.deb ... Unpacking gir1.2-glib-2.0:i386 (1.58.3-2) ... Selecting previously unselected package libpng16-16:i386. Preparing to unpack .../040-libpng16-16_1.6.36-6_i386.deb ... Unpacking libpng16-16:i386 (1.6.36-6) ... Selecting previously unselected package libfreetype6:i386. Preparing to unpack .../041-libfreetype6_2.9.1-3+deb10u1_i386.deb ... Unpacking libfreetype6:i386 (2.9.1-3+deb10u1) ... Selecting previously unselected package libfontconfig1:i386. Preparing to unpack .../042-libfontconfig1_2.13.1-2_i386.deb ... Unpacking libfontconfig1:i386 (2.13.1-2) ... Selecting previously unselected package libpixman-1-0:i386. Preparing to unpack .../043-libpixman-1-0_0.36.0-1_i386.deb ... Unpacking libpixman-1-0:i386 (0.36.0-1) ... Selecting previously unselected package libxau6:i386. Preparing to unpack .../044-libxau6_1%3a1.0.8-1+b2_i386.deb ... Unpacking libxau6:i386 (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp6:i386. Preparing to unpack .../045-libxdmcp6_1%3a1.1.2-3_i386.deb ... Unpacking libxdmcp6:i386 (1:1.1.2-3) ... Selecting previously unselected package libxcb1:i386. Preparing to unpack .../046-libxcb1_1.13.1-2_i386.deb ... Unpacking libxcb1:i386 (1.13.1-2) ... Selecting previously unselected package libx11-data. Preparing to unpack .../047-libx11-data_2%3a1.6.7-1_all.deb ... Unpacking libx11-data (2:1.6.7-1) ... Selecting previously unselected package libx11-6:i386. Preparing to unpack .../048-libx11-6_2%3a1.6.7-1_i386.deb ... Unpacking libx11-6:i386 (2:1.6.7-1) ... Selecting previously unselected package libxcb-render0:i386. Preparing to unpack .../049-libxcb-render0_1.13.1-2_i386.deb ... Unpacking libxcb-render0:i386 (1.13.1-2) ... Selecting previously unselected package libxcb-shm0:i386. Preparing to unpack .../050-libxcb-shm0_1.13.1-2_i386.deb ... Unpacking libxcb-shm0:i386 (1.13.1-2) ... Selecting previously unselected package libxext6:i386. Preparing to unpack .../051-libxext6_2%3a1.3.3-1+b2_i386.deb ... Unpacking libxext6:i386 (2:1.3.3-1+b2) ... Selecting previously unselected package libxrender1:i386. Preparing to unpack .../052-libxrender1_1%3a0.9.10-1_i386.deb ... Unpacking libxrender1:i386 (1:0.9.10-1) ... Selecting previously unselected package libcairo2:i386. Preparing to unpack .../053-libcairo2_1.16.0-4_i386.deb ... Unpacking libcairo2:i386 (1.16.0-4) ... Selecting previously unselected package libcairo-gobject2:i386. Preparing to unpack .../054-libcairo-gobject2_1.16.0-4_i386.deb ... Unpacking libcairo-gobject2:i386 (1.16.0-4) ... Selecting previously unselected package gir1.2-freedesktop:i386. Preparing to unpack .../055-gir1.2-freedesktop_1.58.3-2_i386.deb ... Unpacking gir1.2-freedesktop:i386 (1.58.3-2) ... Selecting previously unselected package libibus-1.0-5:i386. Preparing to unpack .../056-libibus-1.0-5_1.5.19-4+deb10u1_i386.deb ... Unpacking libibus-1.0-5:i386 (1.5.19-4+deb10u1) ... Selecting previously unselected package gir1.2-ibus-1.0:i386. Preparing to unpack .../057-gir1.2-ibus-1.0_1.5.19-4+deb10u1_i386.deb ... Unpacking gir1.2-ibus-1.0:i386 (1.5.19-4+deb10u1) ... Selecting previously unselected package python3-markupsafe. Preparing to unpack .../058-python3-markupsafe_1.1.0-1_i386.deb ... Unpacking python3-markupsafe (1.1.0-1) ... Selecting previously unselected package python3-mako. Preparing to unpack .../059-python3-mako_1.0.7+ds1-1_all.deb ... Unpacking python3-mako (1.0.7+ds1-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../060-python3-pkg-resources_40.8.0-1_all.deb ... Unpacking python3-pkg-resources (40.8.0-1) ... Selecting previously unselected package python3-markdown. Preparing to unpack .../061-python3-markdown_3.0.1-3_all.deb ... Unpacking python3-markdown (3.0.1-3) ... Selecting previously unselected package gobject-introspection. Preparing to unpack .../062-gobject-introspection_1.58.3-2_i386.deb ... Unpacking gobject-introspection (1.58.3-2) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../063-liburi-perl_1.76-1_all.deb ... Unpacking liburi-perl (1.76-1) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../064-libencode-locale-perl_1.05-1_all.deb ... Unpacking libencode-locale-perl (1.05-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../065-libtimedate-perl_2.3000-2+deb10u1_all.deb ... Unpacking libtimedate-perl (2.3000-2+deb10u1) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../066-libhttp-date-perl_6.02-1_all.deb ... Unpacking libhttp-date-perl (6.02-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../067-libfile-listing-perl_6.04-1_all.deb ... Unpacking libfile-listing-perl (6.04-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../068-libhtml-tagset-perl_3.20-3_all.deb ... Unpacking libhtml-tagset-perl (3.20-3) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../069-libhtml-parser-perl_3.72-3+b3_i386.deb ... Unpacking libhtml-parser-perl (3.72-3+b3) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../070-libhtml-tree-perl_5.07-2_all.deb ... Unpacking libhtml-tree-perl (5.07-2) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../071-libio-html-perl_1.001-1_all.deb ... Unpacking libio-html-perl (1.001-1) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../072-liblwp-mediatypes-perl_6.02-1_all.deb ... Unpacking liblwp-mediatypes-perl (6.02-1) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../073-libhttp-message-perl_6.18-1_all.deb ... Unpacking libhttp-message-perl (6.18-1) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../074-libhttp-cookies-perl_6.04-1_all.deb ... Unpacking libhttp-cookies-perl (6.04-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../075-libhttp-negotiate-perl_6.01-1_all.deb ... Unpacking libhttp-negotiate-perl (6.01-1) ... Selecting previously unselected package perl-openssl-defaults:i386. Preparing to unpack .../076-perl-openssl-defaults_3_i386.deb ... Unpacking perl-openssl-defaults:i386 (3) ... Selecting previously unselected package libnet-ssleay-perl. Preparing to unpack .../077-libnet-ssleay-perl_1.85-2+b1_i386.deb ... Unpacking libnet-ssleay-perl (1.85-2+b1) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../078-libio-socket-ssl-perl_2.060-3_all.deb ... Unpacking libio-socket-ssl-perl (2.060-3) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../079-libnet-http-perl_6.18-1_all.deb ... Unpacking libnet-http-perl (6.18-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../080-liblwp-protocol-https-perl_6.07-2_all.deb ... Unpacking liblwp-protocol-https-perl (6.07-2) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../081-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../082-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../083-libwww-perl_6.36-2_all.deb ... Unpacking libwww-perl (6.36-2) ... Selecting previously unselected package libxml-parser-perl. Preparing to unpack .../084-libxml-parser-perl_2.44-4_i386.deb ... Unpacking libxml-parser-perl (2.44-4) ... Selecting previously unselected package intltool. Preparing to unpack .../085-intltool_0.51.0-5_all.deb ... Unpacking intltool (0.51.0-5) ... Selecting previously unselected package libanthy1:i386. Preparing to unpack .../086-libanthy1_1%3a0.3-8.1_i386.deb ... Unpacking libanthy1:i386 (1:0.3-8.1) ... Selecting previously unselected package libanthy-dev:i386. Preparing to unpack .../087-libanthy-dev_1%3a0.3-8.1_i386.deb ... Unpacking libanthy-dev:i386 (1:0.3-8.1) ... Selecting previously unselected package uuid-dev:i386. Preparing to unpack .../088-uuid-dev_2.33.1-0.1_i386.deb ... Unpacking uuid-dev:i386 (2.33.1-0.1) ... Selecting previously unselected package libblkid-dev:i386. Preparing to unpack .../089-libblkid-dev_2.33.1-0.1_i386.deb ... Unpacking libblkid-dev:i386 (2.33.1-0.1) ... Selecting previously unselected package libexpat1-dev:i386. Preparing to unpack .../090-libexpat1-dev_2.2.6-2+deb10u1_i386.deb ... Unpacking libexpat1-dev:i386 (2.2.6-2+deb10u1) ... Selecting previously unselected package libffi-dev:i386. Preparing to unpack .../091-libffi-dev_3.2.1-9_i386.deb ... Unpacking libffi-dev:i386 (3.2.1-9) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../092-libglib2.0-data_2.58.3-2+deb10u2_all.deb ... Unpacking libglib2.0-data (2.58.3-2+deb10u2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../093-libglib2.0-bin_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../094-libglib2.0-dev-bin_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libmount-dev:i386. Preparing to unpack .../095-libmount-dev_2.33.1-0.1_i386.deb ... Unpacking libmount-dev:i386 (2.33.1-0.1) ... Selecting previously unselected package libpcre16-3:i386. Preparing to unpack .../096-libpcre16-3_2%3a8.39-12_i386.deb ... Unpacking libpcre16-3:i386 (2:8.39-12) ... Selecting previously unselected package libpcre32-3:i386. Preparing to unpack .../097-libpcre32-3_2%3a8.39-12_i386.deb ... Unpacking libpcre32-3:i386 (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:i386. Preparing to unpack .../098-libpcrecpp0v5_2%3a8.39-12_i386.deb ... Unpacking libpcrecpp0v5:i386 (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:i386. Preparing to unpack .../099-libpcre3-dev_2%3a8.39-12_i386.deb ... Unpacking libpcre3-dev:i386 (2:8.39-12) ... Selecting previously unselected package libsepol1-dev:i386. Preparing to unpack .../100-libsepol1-dev_2.8-1_i386.deb ... Unpacking libsepol1-dev:i386 (2.8-1) ... Selecting previously unselected package libselinux1-dev:i386. Preparing to unpack .../101-libselinux1-dev_2.8-1+b1_i386.deb ... Unpacking libselinux1-dev:i386 (2.8-1+b1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../102-pkg-config_0.29-6_i386.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package zlib1g-dev:i386. Preparing to unpack .../103-zlib1g-dev_1%3a1.2.11.dfsg-1_i386.deb ... Unpacking zlib1g-dev:i386 (1:1.2.11.dfsg-1) ... Selecting previously unselected package libglib2.0-dev:i386. Preparing to unpack .../104-libglib2.0-dev_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-dev:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libgirepository1.0-dev:i386. Preparing to unpack .../105-libgirepository1.0-dev_1.58.3-2_i386.deb ... Unpacking libgirepository1.0-dev:i386 (1.58.3-2) ... Selecting previously unselected package libpython3.7:i386. Preparing to unpack .../106-libpython3.7_3.7.3-2+deb10u1_i386.deb ... Unpacking libpython3.7:i386 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3.7-dev:i386. Preparing to unpack .../107-libpython3.7-dev_3.7.3-2+deb10u1_i386.deb ... Unpacking libpython3.7-dev:i386 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3-dev:i386. Preparing to unpack .../108-libpython3-dev_3.7.3-1_i386.deb ... Unpacking libpython3-dev:i386 (3.7.3-1) ... Selecting previously unselected package python3.7-dev. Preparing to unpack .../109-python3.7-dev_3.7.3-2+deb10u1_i386.deb ... Unpacking python3.7-dev (3.7.3-2+deb10u1) ... Selecting previously unselected package python3-dev. Preparing to unpack .../110-python3-dev_3.7.3-1_i386.deb ... Unpacking python3-dev (3.7.3-1) ... Selecting previously unselected package python3-gi. Preparing to unpack .../111-python3-gi_3.30.4-1_i386.deb ... Unpacking python3-gi (3.30.4-1) ... Setting up libpcrecpp0v5:i386 (2:8.39-12) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up libpixman-1-0:i386 (0.36.0-1) ... Setting up libxau6:i386 (1:1.0.8-1+b2) ... Setting up mime-support (3.62) ... Setting up libpcre16-3:i386 (2:8.39-12) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libhtml-tagset-perl (3.20-3) ... Setting up liblwp-mediatypes-perl (6.02-1) ... Setting up libibus-1.0-5:i386 (1.5.19-4+deb10u1) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up libsepol1-dev:i386 (2.8-1) ... Setting up perl-openssl-defaults:i386 (3) ... Setting up gettext-base (0.19.8.1-9) ... Setting up libencode-locale-perl (1.05-1) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libffi-dev:i386 (3.2.1-9) ... Setting up libicu63:i386 (63.1-6) ... Setting up autotools-dev (20180224.1) ... Setting up libglib2.0-data (2.58.3-2+deb10u2) ... Setting up anthy-common (1:0.3-8.1) ... Setting up libexpat1-dev:i386 (2.2.6-2+deb10u1) ... Setting up libx11-data (2:1.6.7-1) ... Setting up libanthy1:i386 (1:0.3-8.1) ... Setting up uuid-dev:i386 (2.33.1-0.1) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up libpng16-16:i386 (1.6.36-6) ... Setting up libpcre32-3:i386 (2:8.39-12) ... Setting up libio-html-perl (1.001-1) ... Setting up autopoint (0.19.8.1-9) ... Setting up pkg-config (0.29-6) ... Setting up fonts-dejavu-core (2.37-1) ... Setting up libtimedate-perl (2.3000-2+deb10u1) ... Setting up zlib1g-dev:i386 (1:1.2.11.dfsg-1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up libgirepository-1.0-1:i386 (1.58.3-2) ... Setting up netbase (5.6) ... Setting up libmpdec2:i386 (2.4.2-2) ... Setting up openssl (1.1.1d-0+deb10u2) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up liburi-perl (1.76-1) ... Setting up libreadline7:i386 (7.0-5) ... Setting up libnet-ssleay-perl (1.85-2+b1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libblkid-dev:i386 (2.33.1-0.1) ... Setting up libanthy-dev:i386 (1:0.3-8.1) ... Setting up libhttp-date-perl (6.02-1) ... Setting up libxdmcp6:i386 (1:1.1.2-3) ... Setting up libpython3.7-stdlib:i386 (3.7.3-2+deb10u1) ... Setting up libxcb1:i386 (1.13.1-2) ... Setting up libfile-listing-perl (6.04-1) ... Setting up libpython3.7:i386 (3.7.3-2+deb10u1) ... Setting up libtool (2.4.6-9) ... Setting up libxcb-render0:i386 (1.13.1-2) ... Setting up libpcre3-dev:i386 (2:8.39-12) ... Setting up libpython3.7-dev:i386 (3.7.3-2+deb10u1) ... Setting up libglib2.0-bin (2.58.3-2+deb10u2) ... Setting up libnet-http-perl (6.18-1) ... Setting up m4 (1.4.18-2) ... Setting up libxcb-shm0:i386 (1.13.1-2) ... Setting up ca-certificates (20190110) ... Updating certificates in /etc/ssl/certs... 128 added, 0 removed; done. Setting up libfreetype6:i386 (2.9.1-3+deb10u1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:i386 (0.6.12-3) ... Setting up ucf (3.0038+nmu1) ... Setting up gir1.2-glib-2.0:i386 (1.58.3-2) ... Setting up autoconf (2.69-11) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libhtml-parser-perl (3.72-3+b3) ... Setting up libx11-6:i386 (2:1.6.7-1) ... Setting up gir1.2-ibus-1.0:i386 (1.5.19-4+deb10u1) ... Setting up libmount-dev:i386 (2.33.1-0.1) ... Setting up libio-socket-ssl-perl (2.060-3) ... Setting up libpython3-stdlib:i386 (3.7.3-1) ... Setting up libhttp-message-perl (6.18-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u1) ... Setting up libhttp-negotiate-perl (6.01-1) ... Setting up gettext (0.19.8.1-9) ... Setting up libpython3-dev:i386 (3.7.3-1) ... Setting up libxrender1:i386 (1:0.9.10-1) ... Setting up libhttp-cookies-perl (6.04-1) ... Setting up libselinux1-dev:i386 (2.8-1+b1) ... Setting up fontconfig-config (2.13.1-2) ... Setting up libhtml-tree-perl (5.07-2) ... Setting up libxext6:i386 (2:1.3.3-1+b2) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up python3-markupsafe (1.1.0-1) ... Setting up python3.7-dev (3.7.3-2+deb10u1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up python3-gi (3.30.4-1) ... Setting up libfontconfig1:i386 (2.13.1-2) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up python3-mako (1.0.7+ds1-1) ... Setting up python3-pkg-resources (40.8.0-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up dh-python (3.20190308) ... Setting up libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Setting up po-debconf (1.0.21) ... Setting up libcairo2:i386 (1.16.0-4) ... Setting up libglib2.0-dev:i386 (2.58.3-2+deb10u2) ... Setting up python3-dev (3.7.3-1) ... Setting up python3-markdown (3.0.1-3) ... Setting up libcairo-gobject2:i386 (1.16.0-4) ... Setting up gir1.2-freedesktop:i386 (1.58.3-2) ... Setting up gobject-introspection (1.58.3-2) ... Setting up libgirepository1.0-dev:i386 (1.58.3-2) ... Setting up libwww-perl (6.36-2) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up liblwp-protocol-https-perl (6.07-2) ... Setting up libxml-parser-perl (2.44-4) ... Setting up debhelper (12.1.1) ... Setting up intltool (0.51.0-5) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for ca-certificates (20190110) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/ibus-anthy-1.5.10/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package ibus-anthy dpkg-buildpackage: info: source version 1.5.10-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Boyuan Yang dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 dpkg-source: info: using options from ibus-anthy-1.5.10/debian/source/options: --extend-diff-ignore=^setup/anthyprefs.py$ fakeroot debian/rules clean dh clean --with python3 dh_clean debian/rules build dh build --with python3 dh_update_autotools_config debian/rules override_dh_autoreconf make[1]: Entering directory '/build/ibus-anthy-1.5.10' dh_autoreconf ./autogen.sh -- --with-python=python3 + autopoint --force Copying file ABOUT-NLS Copying file config.rpath Copying file m4/codeset.m4 Copying file m4/gettext.m4 Copying file m4/glibc2.m4 Copying file m4/glibc21.m4 Copying file m4/iconv.m4 Copying file m4/intdiv0.m4 Copying file m4/intl.m4 Copying file m4/intldir.m4 Copying file m4/intmax.m4 Copying file m4/inttypes-pri.m4 Copying file m4/inttypes_h.m4 Copying file m4/lcmessage.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/lock.m4 Copying file m4/longdouble.m4 Copying file m4/longlong.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/printf-posix.m4 Copying file m4/progtest.m4 Copying file m4/size_max.m4 Copying file m4/stdint_h.m4 Copying file m4/uintmax_t.m4 Copying file m4/ulonglong.m4 Copying file m4/visibility.m4 Copying file m4/wchar_t.m4 Copying file m4/wint_t.m4 Copying file m4/xsize.m4 Copying file po/Makefile.in.in Copying file po/Makevars.template Copying file po/Rules-quot Copying file po/boldquot.sed Copying file po/en@boldquot.header Copying file po/en@quot.header Copying file po/insert-header.sin Copying file po/quot.sed Copying file po/remove-potcdate.sin + libtoolize --automake --copy --force + intltoolize --copy --force You should add the contents of '/usr/share/aclocal/intltool.m4' to 'aclocal.m4'. + aclocal -I m4 --force + autoheader --force + automake --add-missing --copy --force configure.ac:417: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. configure.ac:417: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, configure.ac:417: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. configure.ac:42: installing './compile' configure.ac:57: installing './config.guess' configure.ac:57: installing './config.sub' configure.ac:41: installing './install-sh' configure.ac:41: installing './missing' Makefile.am: installing './INSTALL' engine/python2/Makefile.am:39: warning: addsuffix .in, $(engine_anthy_built_files: non-POSIX variable name engine/python2/Makefile.am:39: (probably a GNU make extension) engine/python2/Makefile.am:82: warning: '%'-style pattern rules are a GNU make extension engine/python2/Makefile.am: installing './depcomp' engine/python2/Makefile.am:25: installing './py-compile' engine/python3/Makefile.am:39: warning: addsuffix .in, $(engine_anthy_built_files: non-POSIX variable name engine/python3/Makefile.am:39: (probably a GNU make extension) engine/python3/Makefile.am:82: warning: '%'-style pattern rules are a GNU make extension gir/Makefile.am:50: warning: shell pkg-config --variable=includedir anthy: non-POSIX variable name gir/Makefile.am:50: (probably a GNU make extension) setup/python2/Makefile.am:57: warning: addsuffix .in, $(setup_anthy_built_files: non-POSIX variable name setup/python2/Makefile.am:57: (probably a GNU make extension) setup/python3/Makefile.am:57: warning: addsuffix .in, $(setup_anthy_built_files: non-POSIX variable name setup/python3/Makefile.am:57: (probably a GNU make extension) + autoconf --force + echo --with-python=python3 + grep -q CFLAGS + + CFLAGS=-g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic + CXXFLAGS=-g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic + ./configure --with-python=python3 CFLAGS=-g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic CXXFLAGS=-g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking nano version... 0 (release) checking whether build environment is sane... yes checking whether to enable maintainer-specific portions of Makefiles... yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking for ANSI C header files... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_i386) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_i386 checking if the linker (/usr/bin/ld -m elf_i386) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_i386) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_i386) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether NLS is requested... yes checking for intltool >= 0.41.1... 0.51.0 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.28.1 checking for XML::Parser... ok checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for ANTHY... yes checking whether NTH_UNCONVERTED_CANDIDATE is declared... yes checking whether NTH_KATAKANA_CANDIDATE is declared... yes checking whether NTH_HIRAGANA_CANDIDATE is declared... yes checking whether NTH_HALFKANA_CANDIDATE is declared... yes checking for GOBJECT2... yes checking for gobject-introspection... yes checking for env... /usr/bin/env checking whether python3 version is >= 2.5... yes checking for python3 version... 3.7 checking for python3 platform... linux checking for python3 script directory... ${prefix}/lib/python3.7/site-packages checking for python3 extension module directory... ${exec_prefix}/lib/python3.7/site-packages checking if your ibus version is supported... -c:2: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking what are the enviroments for ibus-engine-anthy... none checking whether you enable pygtk2 anthy... no checking if you install the private png file... no checking if IBus.EngineDesc has get_symbol... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking if IBus.Property has get_symbol... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking if IBus.EngineDesc has get_layout_option... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking if IBus.EngineDesc has get_version... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking if IBus.EngineDesc has get_icon_prop_key... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking for msgfmt... (cached) /usr/bin/msgfmt checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for xgettext... (cached) /usr/bin/xgettext checking for msgmerge... (cached) /usr/bin/msgmerge checking for ld used by GCC... /usr/bin/ld -m elf_i386 checking if the linker (/usr/bin/ld -m elf_i386) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking that generated files are newer than configure... done checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating po/Makefile.in config.status: creating Makefile config.status: creating ibus-anthy.spec config.status: creating data/Makefile config.status: creating gir/Makefile config.status: creating engine/Makefile config.status: creating engine/python2/Makefile config.status: creating engine/python2/anthy.xml.in config.status: creating engine/python2/default.xml.in config.status: creating engine/python3/Makefile config.status: creating engine/python3/anthy.xml.in config.status: creating engine/python3/default.xml.in config.status: creating setup/Makefile config.status: creating setup/python2/Makefile config.status: creating setup/python3/Makefile config.status: creating tests/Makefile config.status: creating icons/Makefile config.status: creating m4/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing po/stamp-it commands IBus-Anthy version 1.5.10 GOBJECT2_CFLAGS -I/usr/include/glib-2.0 -I/usr/lib/i386-linux-gnu/glib-2.0/include GOBJECT2_LIBS -lgobject-2.0 -lglib-2.0 ANTHY_GOBJECT_LIBDIR $(libdir) ANTHY_GOBJECT_GIRDIR $(datadir)/gir-1.0 ANTHY_GOBJECT_TYPELIBSDIR $(libdir)/girepository-1.0 LT_VERSION_INFO 5:510:0 ENV_IBUS_ENGINE HAVE_PYGTK2_ANTHY no python python3 Enable python2 no Enable python3 yes python-config PYTHON_CFLAGS PYTHON_LIBS ANTHY_ZIPCODE_FILE /usr/local/share/anthy/zipcode.t KASUMI_EXEC_FILE ${exec_prefix}/bin/kasumi KASUMI_ICON_FILE ${datarootdir}/pixmaps/kasumi.png ICON_PREFERENCE preferences-desktop ON_OFF_KEYS 'Zenkaku_Hankaku', 'Ctrl+J' HOTKEYS_XML SYMBOL_XML あ ICON_PROP_KEY_XML InputMode LAYOUT_XML jp make[1]: Leaving directory '/build/ibus-anthy-1.5.10' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/ibus-anthy-1.5.10' dh_auto_configure -- --libexecdir=/usr/lib/ibus --with-layout='default' --with-python=python3 ./configure --build=i686-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu --libexecdir=\${prefix}/lib/i386-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --libexecdir=/usr/lib/ibus --with-layout=default --with-python=python3 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking nano version... 0 (release) checking whether build environment is sane... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) none checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking for ANSI C header files... (cached) yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether NLS is requested... yes checking for intltool >= 0.41.1... 0.51.0 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.28.1 checking for XML::Parser... ok checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for ANTHY... yes checking whether NTH_UNCONVERTED_CANDIDATE is declared... yes checking whether NTH_KATAKANA_CANDIDATE is declared... yes checking whether NTH_HIRAGANA_CANDIDATE is declared... yes checking whether NTH_HALFKANA_CANDIDATE is declared... yes checking for GOBJECT2... yes checking for gobject-introspection... yes checking for env... /usr/bin/env checking whether python3 version is >= 2.5... yes checking for python3 version... 3.7 checking for python3 platform... linux checking for python3 script directory... ${prefix}/lib/python3.7/site-packages checking for python3 extension module directory... ${exec_prefix}/lib/python3.7/site-packages checking if your ibus version is supported... -c:2: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking what are the enviroments for ibus-engine-anthy... none checking whether you enable pygtk2 anthy... no checking if you install the private png file... no checking if IBus.EngineDesc has get_symbol... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking if IBus.Property has get_symbol... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking if IBus.EngineDesc has get_layout_option... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking if IBus.EngineDesc has get_version... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking if IBus.EngineDesc has get_icon_prop_key... -c:1: PyGIWarning: IBus was imported without specifying a version first. Use gi.require_version('IBus', '1.0') before import to ensure that the right version gets loaded. yes checking for msgfmt... (cached) /usr/bin/msgfmt checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for xgettext... (cached) /usr/bin/xgettext checking for msgmerge... (cached) /usr/bin/msgmerge checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking that generated files are newer than configure... done checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating po/Makefile.in config.status: creating Makefile config.status: creating ibus-anthy.spec config.status: creating data/Makefile config.status: creating gir/Makefile config.status: creating engine/Makefile config.status: creating engine/python2/Makefile config.status: creating engine/python2/anthy.xml.in config.status: creating engine/python2/default.xml.in config.status: creating engine/python3/Makefile config.status: creating engine/python3/anthy.xml.in config.status: creating engine/python3/default.xml.in config.status: creating setup/Makefile config.status: creating setup/python2/Makefile config.status: creating setup/python3/Makefile config.status: creating tests/Makefile config.status: creating icons/Makefile config.status: creating m4/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing po/stamp-it commands IBus-Anthy version 1.5.10 GOBJECT2_CFLAGS -I/usr/include/glib-2.0 -I/usr/lib/i386-linux-gnu/glib-2.0/include GOBJECT2_LIBS -lgobject-2.0 -lglib-2.0 ANTHY_GOBJECT_LIBDIR $(libdir) ANTHY_GOBJECT_GIRDIR $(datadir)/gir-1.0 ANTHY_GOBJECT_TYPELIBSDIR $(libdir)/girepository-1.0 LT_VERSION_INFO 5:510:0 ENV_IBUS_ENGINE HAVE_PYGTK2_ANTHY no python python3 Enable python2 no Enable python3 yes python-config PYTHON_CFLAGS PYTHON_LIBS ANTHY_ZIPCODE_FILE /usr/share/anthy/zipcode.t KASUMI_EXEC_FILE ${exec_prefix}/bin/kasumi KASUMI_ICON_FILE ${datarootdir}/pixmaps/kasumi.png ICON_PREFERENCE preferences-desktop ON_OFF_KEYS 'Zenkaku_Hankaku', 'Ctrl+J' HOTKEYS_XML SYMBOL_XML あ ICON_PROP_KEY_XML InputMode LAYOUT_XML default make[1]: Leaving directory '/build/ibus-anthy-1.5.10' dh_auto_build make -j18 make[1]: Entering directory '/build/ibus-anthy-1.5.10' make all-recursive make[2]: Entering directory '/build/ibus-anthy-1.5.10' Making all in m4 make[3]: Entering directory '/build/ibus-anthy-1.5.10/m4' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/ibus-anthy-1.5.10/m4' Making all in po make[3]: Entering directory '/build/ibus-anthy-1.5.10/po' file=`echo ca | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ca.po file=`echo cs | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file cs.po file=`echo el | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file el.po file=`echo es | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file es.po file=`echo fr | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file fr.po file=`echo ja | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ja.po file=`echo pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file pt_BR.po file=`echo uk | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file uk.po file=`echo zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file zh_CN.po make[3]: Leaving directory '/build/ibus-anthy-1.5.10/po' Making all in data make[3]: Entering directory '/build/ibus-anthy-1.5.10/data' LC_ALL=C /usr/bin/intltool-merge -x -u -c ../po/.intltool-merge-cache ../po ibus-anthy.appdata.xml.in ibus-anthy.appdata.xml /bin/sed -e "s|\@ANTHY_ZIPCODE_FILE\@|/usr/share/anthy/zipcode.t|g" \ -e "s|\@KASUMI_EXEC_FILE\@|/usr/bin/kasumi|g" \ -e "s|\@KASUMI_ICON_FILE\@|/usr/share/pixmaps/kasumi.png|g" \ -e "s|\@ON_OFF_KEYS\@|'Zenkaku_Hankaku', 'Ctrl+J'|g" \ -e "s|\@pkgdatadir\@|/usr/share/ibus-anthy|g" \ org.freedesktop.ibus.engine.anthy.gschema.xml.in > org.freedesktop.ibus.engine.anthy.gschema.xml Generate emoji.t Generate zipcode.t Generating and caching the translation database Merging translations into ibus-anthy.appdata.xml. CREATED ibus-anthy.appdata.xml make[3]: Leaving directory '/build/ibus-anthy-1.5.10/data' Making all in gir make[3]: Entering directory '/build/ibus-anthy-1.5.10/gir' gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/i386-linux-gnu/glib-2.0/include -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -c -o test.o test.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/i386-linux-gnu/glib-2.0/include -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -c -o anthygcontext.lo anthygcontext.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/i386-linux-gnu/glib-2.0/include -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -c anthygcontext.c -fPIC -DPIC -o .libs/anthygcontext.o anthygcontext.c: In function 'anthy_gcontext_class_init': anthygcontext.c:55:5: warning: 'g_type_class_add_private' is deprecated [-Wdeprecated-declarations] g_type_class_add_private (class, sizeof (AnthyGContextPrivate)); ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/glib-2.0/gobject/gobject.h:24, from /usr/include/glib-2.0/gobject/gbinding.h:29, from /usr/include/glib-2.0/glib-object.h:23, from anthygcontext.c:23: /usr/include/glib-2.0/gobject/gtype.h:1303:10: note: declared here void g_type_class_add_private (gpointer g_class, ^~~~~~~~~~~~~~~~~~~~~~~~ /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -no-undefined -export-symbols-regex "anthy_.*" -version-info 5:510:0 -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o libanthygobject-1.0.la -rpath /usr/lib/i386-linux-gnu anthygcontext.lo -lgobject-2.0 -lglib-2.0 -lanthy -lanthydic libtool: link: /usr/bin/nm -B .libs/anthygcontext.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' | /bin/sed 's/.* //' | sort | uniq > .libs/libanthygobject-1.0.exp libtool: link: /bin/grep -E -e "anthy_.*" ".libs/libanthygobject-1.0.exp" > ".libs/libanthygobject-1.0.expT" libtool: link: mv -f ".libs/libanthygobject-1.0.expT" ".libs/libanthygobject-1.0.exp" libtool: link: echo "{ global:" > .libs/libanthygobject-1.0.ver libtool: link: cat .libs/libanthygobject-1.0.exp | sed -e "s/\(.*\)/\1;/" >> .libs/libanthygobject-1.0.ver libtool: link: echo "local: *; };" >> .libs/libanthygobject-1.0.ver libtool: link: gcc -shared -fPIC -DPIC .libs/anthygcontext.o -lgobject-2.0 -lglib-2.0 -lanthy -lanthydic -g -O2 -fstack-protector-strong -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--as-needed -Wl,-soname -Wl,libanthygobject-1.0.so.5 -Wl,-version-script -Wl,.libs/libanthygobject-1.0.ver -o .libs/libanthygobject-1.0.so.5.0.510 libtool: link: (cd ".libs" && rm -f "libanthygobject-1.0.so.5" && ln -s "libanthygobject-1.0.so.5.0.510" "libanthygobject-1.0.so.5") libtool: link: (cd ".libs" && rm -f "libanthygobject-1.0.so" && ln -s "libanthygobject-1.0.so.5.0.510" "libanthygobject-1.0.so") libtool: link: ( cd ".libs" && rm -f "libanthygobject-1.0.la" && ln -s "../libanthygobject-1.0.la" "libanthygobject-1.0.la" ) /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o test test.o libanthygobject-1.0.la -lgobject-2.0 -lglib-2.0 -lanthy -lanthydic CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" CFLAGS="-g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic" LDFLAGS="-Wl,-z,relro -Wl,-z,now -Wl,--as-needed" CC="gcc" PKG_CONFIG="/usr/bin/pkg-config" GI_HOST_OS="" DLLTOOL="false" /usr/bin/g-ir-scanner --namespace=Anthy --nsversion=9000 --libtool="/bin/bash ../libtool" --include=GObject-2.0 --library=libanthygobject-1.0.la --library=anthy --pkg=anthy --external-library --reparse-validate --identifier-prefix=Anthy --symbol-prefix=anthy --accept-unprefixed --warn-all --cflags-begin --cflags-end anthygcontext.c anthygcontext.h /usr/include/anthy/anthy.h libanthygobject-1.0.la Makefile --output Anthy-9000.gir libtool: link: gcc -g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--as-needed -o .libs/test test.o ./.libs/libanthygobject-1.0.so -lgobject-2.0 -lglib-2.0 -lanthy -lanthydic /usr/lib/gcc/i686-linux-gnu/8/include/stddef.h:435: syntax error, unexpected identifier in ' __float128 __max_align_f128 __attribute__((__aligned__(__alignof(__float128))));' at '__float128' g-ir-scanner: link: /bin/bash ../libtool --mode=link --tag=CC gcc -o /build/ibus-anthy-1.5.10/gir/tmp-introspectmtyf32qd/Anthy-9000 -export-dynamic -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic /build/ibus-anthy-1.5.10/gir/tmp-introspectmtyf32qd/Anthy-9000.o -lgio-2.0 -lgobject-2.0 -Wl,--export-dynamic -lgmodule-2.0 -pthread -lglib-2.0 -lanthy -lanthydic libanthygobject-1.0.la -lanthy -Wl,-z,relro -Wl,-z,now -Wl,--as-needed libtool: link: gcc -o /build/ibus-anthy-1.5.10/gir/tmp-introspectmtyf32qd/.libs/Anthy-9000 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ibus-anthy-1.5.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic /build/ibus-anthy-1.5.10/gir/tmp-introspectmtyf32qd/Anthy-9000.o -Wl,--export-dynamic -pthread -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--as-needed -Wl,--export-dynamic -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lanthydic ./.libs/libanthygobject-1.0.so -lanthy -pthread usr/include/anthy/anthy.h:55: Warning: Anthy: symbol='anthy_conf_override': missing parameter name; undocumentable usr/include/anthy/anthy.h:55: Warning: Anthy: symbol='anthy_conf_override': missing parameter name; undocumentable usr/include/anthy/anthy.h:56: Warning: Anthy: symbol='anthy_set_personality': missing parameter name; undocumentable usr/include/anthy/anthy.h:62: Warning: Anthy: symbol='anthy_reset_context': missing parameter name; undocumentable usr/include/anthy/anthy.h:63: Warning: Anthy: symbol='anthy_release_context': missing parameter name; undocumentable usr/include/anthy/anthy.h:68: Warning: Anthy: symbol='anthy_set_string': missing parameter name; undocumentable usr/include/anthy/anthy.h:68: Warning: Anthy: symbol='anthy_set_string': missing parameter name; undocumentable usr/include/anthy/anthy.h:70: Warning: Anthy: symbol='anthy_resize_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:70: Warning: Anthy: symbol='anthy_resize_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:70: Warning: Anthy: symbol='anthy_resize_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:71: Warning: Anthy: symbol='anthy_get_stat': missing parameter name; undocumentable usr/include/anthy/anthy.h:71: Warning: Anthy: symbol='anthy_get_stat': missing parameter name; undocumentable usr/include/anthy/anthy.h:72: Warning: Anthy: symbol='anthy_get_segment_stat': missing parameter name; undocumentable usr/include/anthy/anthy.h:72: Warning: Anthy: symbol='anthy_get_segment_stat': missing parameter name; undocumentable usr/include/anthy/anthy.h:72: Warning: Anthy: symbol='anthy_get_segment_stat': missing parameter name; undocumentable usr/include/anthy/anthy.h:74: Warning: Anthy: symbol='anthy_get_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:74: Warning: Anthy: symbol='anthy_get_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:74: Warning: Anthy: symbol='anthy_get_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:74: Warning: Anthy: symbol='anthy_get_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:74: Warning: Anthy: symbol='anthy_get_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:76: Warning: Anthy: symbol='anthy_commit_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:76: Warning: Anthy: symbol='anthy_commit_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:76: Warning: Anthy: symbol='anthy_commit_segment': missing parameter name; undocumentable usr/include/anthy/anthy.h:80: Warning: Anthy: symbol='anthy_set_prediction_string': missing parameter name; undocumentable usr/include/anthy/anthy.h:80: Warning: Anthy: symbol='anthy_set_prediction_string': missing parameter name; undocumentable usr/include/anthy/anthy.h:81: Warning: Anthy: symbol='anthy_get_prediction_stat': missing parameter name; undocumentable usr/include/anthy/anthy.h:81: Warning: Anthy: symbol='anthy_get_prediction_stat': missing parameter name; undocumentable usr/include/anthy/anthy.h:83: Warning: Anthy: symbol='anthy_get_prediction': missing parameter name; undocumentable usr/include/anthy/anthy.h:83: Warning: Anthy: symbol='anthy_get_prediction': missing parameter name; undocumentable usr/include/anthy/anthy.h:83: Warning: Anthy: symbol='anthy_get_prediction': missing parameter name; undocumentable usr/include/anthy/anthy.h:83: Warning: Anthy: symbol='anthy_get_prediction': missing parameter name; undocumentable usr/include/anthy/anthy.h:85: Warning: Anthy: symbol='anthy_commit_prediction': missing parameter name; undocumentable usr/include/anthy/anthy.h:85: Warning: Anthy: symbol='anthy_commit_prediction': missing parameter name; undocumentable usr/include/anthy/anthy.h:88: Warning: Anthy: symbol='anthy_print_context': missing parameter name; undocumentable usr/include/anthy/anthy.h:91: Warning: Anthy: symbol='anthy_logger': missing parameter name; undocumentable usr/include/anthy/anthy.h:92: Warning: Anthy: symbol='anthy_set_logger': missing parameter name; undocumentable usr/include/anthy/anthy.h:61: Warning: Anthy: anthy_create_context: return value: Invalid non-constant return of bare structure or union; register as boxed type or (skip) usr/include/anthy/anthy.h:92: Warning: Anthy: anthy_set_logger: argument arg0: Missing (scope) annotation for callback without GDestroyNotify (valid: call, async) /usr/bin/g-ir-compiler --includedir=. Anthy-9000.gir -o Anthy-9000.typelib make[3]: Leaving directory '/build/ibus-anthy-1.5.10/gir' Making all in engine make[3]: Entering directory '/build/ibus-anthy-1.5.10/engine' Making all in python3 make[4]: Entering directory '/build/ibus-anthy-1.5.10/engine/python3' sed -e "s|\@pkgdatadir\@|/usr/share/ibus-anthy|g" \ -e "s|\@libexecdir\@|/usr/lib/ibus|g" \ -e "s|\@datadir\@|/usr/share|g" \ -e "s|\@LAYOUT\@|default|g" \ -e "s|\@SYMBOL_CHAR_INT\@|0x3042|g" \ -e "s|\@ICON_PREFERENCE\@|preferences-desktop|g" \ -e "s|\@VERSION\@|1.5.10|g" \ _config.py.in > _config.py make all-am make[5]: Entering directory '/build/ibus-anthy-1.5.10/engine/python3' sed -e "s|\@prefix\@|/usr|g" \ -e "s|\@exec_prefix\@|/usr|g" \ -e "s|\@libexecdir\@|/usr/lib/ibus|g" \ -e "s|\@datarootdir\@|/usr/share|g" \ -e "s|\@PACKAGE\@|ibus-anthy|g" \ -e "s|\@PYTHON\@|python3|g" \ -e "s|\@ENV_IBUS_ENGINE\@||g" \ ibus-engine-anthy.in > ibus-engine-anthy sed -e "s|\@LIBEXECDIR\@|/usr/lib/ibus|g" \ -e "s|\@PKGDATADIR\@|/usr/share/ibus-anthy|g" \ -e "s|_description|description|g" \ anthy.xml.in > anthy.xml sed -e "s|\@LIBEXECDIR\@|/usr/lib/ibus|g" \ -e "s|\@PKGDATADIR\@|/usr/share/ibus-anthy|g" \ -e "s|_description|description|g" \ default.xml.in > default.xml make[5]: Leaving directory '/build/ibus-anthy-1.5.10/engine/python3' make[4]: Leaving directory '/build/ibus-anthy-1.5.10/engine/python3' make[4]: Entering directory '/build/ibus-anthy-1.5.10/engine' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/ibus-anthy-1.5.10/engine' make[3]: Leaving directory '/build/ibus-anthy-1.5.10/engine' Making all in icons make[3]: Entering directory '/build/ibus-anthy-1.5.10/icons' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/ibus-anthy-1.5.10/icons' Making all in setup make[3]: Entering directory '/build/ibus-anthy-1.5.10/setup' Making all in python3 make[4]: Entering directory '/build/ibus-anthy-1.5.10/setup/python3' sed -e "s|\@pkgdatadir\@|/usr/share/ibus-anthy|g" \ -e "s|\@libexecdir\@|/usr/lib/ibus|g" \ -e "s|\@datadir\@|/usr/share|g" \ -e "s|\@LAYOUT\@|default|g" \ -e "s|\@SYMBOL_CHAR_INT\@|0x3042|g" \ -e "s|\@ICON_PREFERENCE\@|preferences-desktop|g" \ -e "s|\@VERSION\@|1.5.10|g" \ _config.py.in > _config.py make all-am make[5]: Entering directory '/build/ibus-anthy-1.5.10/setup/python3' sed -e "s|\@prefix\@|/usr|g" \ -e "s|\@localedir\@|/usr/share/locale|g" \ -e "s|\@PYTHON\@|python3|g" \ ibus-setup-anthy.in > ibus-setup-anthy sed \ -e "s|\@libexecdir\@|/usr/lib/ibus|" \ -e "s|\@pkgdatadir\@|/usr/share/ibus-anthy|" \ ibus-setup-anthy.desktop.in.in > ibus-setup-anthy.desktop.in.tmp && mv ibus-setup-anthy.desktop.in.tmp ibus-setup-anthy.desktop.in LC_ALL=C /usr/bin/intltool-merge -d -u -c ../../po/.intltool-merge-cache ../../po ibus-setup-anthy.desktop.in ibus-setup-anthy.desktop Found cached translation database Merging translations into ibus-setup-anthy.desktop. make[5]: Leaving directory '/build/ibus-anthy-1.5.10/setup/python3' make[4]: Leaving directory '/build/ibus-anthy-1.5.10/setup/python3' make[4]: Entering directory '/build/ibus-anthy-1.5.10/setup' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/ibus-anthy-1.5.10/setup' make[3]: Leaving directory '/build/ibus-anthy-1.5.10/setup' Making all in tests make[3]: Entering directory '/build/ibus-anthy-1.5.10/tests' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/ibus-anthy-1.5.10/tests' make[3]: Entering directory '/build/ibus-anthy-1.5.10' make[3]: Leaving directory '/build/ibus-anthy-1.5.10' make[2]: Leaving directory '/build/ibus-anthy-1.5.10' make[1]: Leaving directory '/build/ibus-anthy-1.5.10' debian/rules override_dh_auto_test make[1]: Entering directory '/build/ibus-anthy-1.5.10' # we do not make test for now since it needs # a running ibus-daemon instance make[1]: Leaving directory '/build/ibus-anthy-1.5.10' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary --with python3 dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/ibus-anthy-1.5.10/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/ibus-anthy-1.5.10' Making install in m4 make[2]: Entering directory '/build/ibus-anthy-1.5.10/m4' make[3]: Entering directory '/build/ibus-anthy-1.5.10/m4' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ibus-anthy-1.5.10/m4' make[2]: Leaving directory '/build/ibus-anthy-1.5.10/m4' Making install in po make[2]: Entering directory '/build/ibus-anthy-1.5.10/po' linguas="ca cs el es fr ja pt_BR uk zh_CN "; \ for lang in $linguas; do \ dir=/build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/$lang/LC_MESSAGES; \ /bin/bash /build/ibus-anthy-1.5.10/install-sh -d $dir; \ if test -r $lang.gmo; then \ /usr/bin/install -c -m 644 $lang.gmo $dir/ibus-anthy.mo; \ echo "installing $lang.gmo as $dir/ibus-anthy.mo"; \ else \ /usr/bin/install -c -m 644 ./$lang.gmo $dir/ibus-anthy.mo; \ echo "installing ./$lang.gmo as" \ "$dir/ibus-anthy.mo"; \ fi; \ if test -r $lang.gmo.m; then \ /usr/bin/install -c -m 644 $lang.gmo.m $dir/ibus-anthy.mo.m; \ echo "installing $lang.gmo.m as $dir/ibus-anthy.mo.m"; \ else \ if test -r ./$lang.gmo.m ; then \ /usr/bin/install -c -m 644 ./$lang.gmo.m \ $dir/ibus-anthy.mo.m; \ echo "installing ./$lang.gmo.m as" \ "$dir/ibus-anthy.mo.m"; \ else \ true; \ fi; \ fi; \ done installing ca.gmo as /build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/ca/LC_MESSAGES/ibus-anthy.mo installing cs.gmo as /build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/cs/LC_MESSAGES/ibus-anthy.mo installing el.gmo as /build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/el/LC_MESSAGES/ibus-anthy.mo installing es.gmo as /build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/es/LC_MESSAGES/ibus-anthy.mo installing fr.gmo as /build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/fr/LC_MESSAGES/ibus-anthy.mo installing ja.gmo as /build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/ja/LC_MESSAGES/ibus-anthy.mo installing pt_BR.gmo as /build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/pt_BR/LC_MESSAGES/ibus-anthy.mo installing uk.gmo as /build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/uk/LC_MESSAGES/ibus-anthy.mo installing zh_CN.gmo as /build/ibus-anthy-1.5.10/debian/tmp/usr/share/locale/zh_CN/LC_MESSAGES/ibus-anthy.mo make[2]: Leaving directory '/build/ibus-anthy-1.5.10/po' Making install in data make[2]: Entering directory '/build/ibus-anthy-1.5.10/data' make[3]: Entering directory '/build/ibus-anthy-1.5.10/data' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/metainfo' /usr/bin/install -c -m 644 ibus-anthy.appdata.xml '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/metainfo' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus-anthy/dicts' /usr/bin/install -c -m 644 emoji.t era.t oldchar.t symbol.t zipcode.t '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus-anthy/dicts' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/glib-2.0/schemas' /usr/bin/install -c -m 644 org.freedesktop.ibus.engine.anthy.gschema.xml '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/glib-2.0/schemas' make install-data-hook make[4]: Entering directory '/build/ibus-anthy-1.5.10/data' if test -z "/build/ibus-anthy-1.5.10/debian/tmp"; then \ glib-compile-schemas /usr/share/glib-2.0/schemas; \ fi make[4]: Leaving directory '/build/ibus-anthy-1.5.10/data' make[3]: Leaving directory '/build/ibus-anthy-1.5.10/data' make[2]: Leaving directory '/build/ibus-anthy-1.5.10/data' Making install in gir make[2]: Entering directory '/build/ibus-anthy-1.5.10/gir' make[3]: Entering directory '/build/ibus-anthy-1.5.10/gir' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/include/ibus-anthy-1.0' /usr/bin/install -c -m 644 anthygcontext.h '/build/ibus-anthy-1.5.10/debian/tmp/usr/include/ibus-anthy-1.0' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/gir-1.0' /usr/bin/install -c -m 644 Anthy-9000.gir '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/gir-1.0' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/lib/i386-linux-gnu' /bin/bash ../libtool --mode=install /usr/bin/install -c libanthygobject-1.0.la '/build/ibus-anthy-1.5.10/debian/tmp/usr/lib/i386-linux-gnu' libtool: install: /usr/bin/install -c .libs/libanthygobject-1.0.so.5.0.510 /build/ibus-anthy-1.5.10/debian/tmp/usr/lib/i386-linux-gnu/libanthygobject-1.0.so.5.0.510 libtool: install: (cd /build/ibus-anthy-1.5.10/debian/tmp/usr/lib/i386-linux-gnu && { ln -s -f libanthygobject-1.0.so.5.0.510 libanthygobject-1.0.so.5 || { rm -f libanthygobject-1.0.so.5 && ln -s libanthygobject-1.0.so.5.0.510 libanthygobject-1.0.so.5; }; }) libtool: install: (cd /build/ibus-anthy-1.5.10/debian/tmp/usr/lib/i386-linux-gnu && { ln -s -f libanthygobject-1.0.so.5.0.510 libanthygobject-1.0.so || { rm -f libanthygobject-1.0.so && ln -s libanthygobject-1.0.so.5.0.510 libanthygobject-1.0.so; }; }) libtool: install: /usr/bin/install -c .libs/libanthygobject-1.0.lai /build/ibus-anthy-1.5.10/debian/tmp/usr/lib/i386-linux-gnu/libanthygobject-1.0.la libtool: warning: remember to run 'libtool --finish /usr/lib/i386-linux-gnu' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/lib/i386-linux-gnu/girepository-1.0' /usr/bin/install -c -m 644 Anthy-9000.typelib '/build/ibus-anthy-1.5.10/debian/tmp/usr/lib/i386-linux-gnu/girepository-1.0' make[3]: Leaving directory '/build/ibus-anthy-1.5.10/gir' make[2]: Leaving directory '/build/ibus-anthy-1.5.10/gir' Making install in engine make[2]: Entering directory '/build/ibus-anthy-1.5.10/engine' Making install in python3 make[3]: Entering directory '/build/ibus-anthy-1.5.10/engine/python3' make install-am make[4]: Entering directory '/build/ibus-anthy-1.5.10/engine/python3' make[5]: Entering directory '/build/ibus-anthy-1.5.10/engine/python3' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/lib/ibus' /usr/bin/install -c ibus-engine-anthy '/build/ibus-anthy-1.5.10/debian/tmp/usr/lib/ibus' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus/component' /usr/bin/install -c -m 644 anthy.xml '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus/component' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus-anthy/engine' /usr/bin/install -c -m 644 default.xml '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus-anthy/engine' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus-anthy/engine' /usr/bin/install -c -m 644 _config.py engine.py factory.py jastring.py kana.py main.py romaji.py segment.py tables.py thumb.py '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus-anthy/engine' Byte-compiling python modules... _config.pyengine.pyfactory.pyjastring.pykana.pymain.pyromaji.pysegment.pytables.pythumb.py -c:2: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses Byte-compiling python modules (optimized versions) ... _config.pyengine.pyfactory.pyjastring.pykana.pymain.pyromaji.pysegment.pytables.pythumb.py make[5]: Leaving directory '/build/ibus-anthy-1.5.10/engine/python3' make[4]: Leaving directory '/build/ibus-anthy-1.5.10/engine/python3' make[3]: Leaving directory '/build/ibus-anthy-1.5.10/engine/python3' make[3]: Entering directory '/build/ibus-anthy-1.5.10/engine' make[4]: Entering directory '/build/ibus-anthy-1.5.10/engine' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/ibus-anthy-1.5.10/engine' make[3]: Leaving directory '/build/ibus-anthy-1.5.10/engine' make[2]: Leaving directory '/build/ibus-anthy-1.5.10/engine' Making install in icons make[2]: Entering directory '/build/ibus-anthy-1.5.10/icons' make[3]: Entering directory '/build/ibus-anthy-1.5.10/icons' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/icons/hicolor/scalable/apps/' /usr/bin/install -c -m 644 ibus-anthy.svg '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/icons/hicolor/scalable/apps/' make[3]: Leaving directory '/build/ibus-anthy-1.5.10/icons' make[2]: Leaving directory '/build/ibus-anthy-1.5.10/icons' Making install in setup make[2]: Entering directory '/build/ibus-anthy-1.5.10/setup' Making install in python3 make[3]: Entering directory '/build/ibus-anthy-1.5.10/setup/python3' make install-am make[4]: Entering directory '/build/ibus-anthy-1.5.10/setup/python3' make[5]: Entering directory '/build/ibus-anthy-1.5.10/setup/python3' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/lib/ibus' /usr/bin/install -c ibus-setup-anthy '/build/ibus-anthy-1.5.10/debian/tmp/usr/lib/ibus' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/applications' /usr/bin/install -c -m 644 ibus-setup-anthy.desktop '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/applications' /bin/mkdir -p '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus-anthy/setup' /usr/bin/install -c -m 644 _config.py anthyprefs.py main.py prefs.py setup.ui '/build/ibus-anthy-1.5.10/debian/tmp/usr/share/ibus-anthy/setup' Byte-compiling python modules... _config.pyanthyprefs.pymain.pyprefs.py -c:2: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses Byte-compiling python modules (optimized versions) ... _config.pyanthyprefs.pymain.pyprefs.py make[5]: Leaving directory '/build/ibus-anthy-1.5.10/setup/python3' make[4]: Leaving directory '/build/ibus-anthy-1.5.10/setup/python3' make[3]: Leaving directory '/build/ibus-anthy-1.5.10/setup/python3' make[3]: Entering directory '/build/ibus-anthy-1.5.10/setup' make[4]: Entering directory '/build/ibus-anthy-1.5.10/setup' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/ibus-anthy-1.5.10/setup' make[3]: Leaving directory '/build/ibus-anthy-1.5.10/setup' make[2]: Leaving directory '/build/ibus-anthy-1.5.10/setup' Making install in tests make[2]: Entering directory '/build/ibus-anthy-1.5.10/tests' make[3]: Entering directory '/build/ibus-anthy-1.5.10/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ibus-anthy-1.5.10/tests' make[2]: Leaving directory '/build/ibus-anthy-1.5.10/tests' make[2]: Entering directory '/build/ibus-anthy-1.5.10' make[3]: Entering directory '/build/ibus-anthy-1.5.10' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ibus-anthy-1.5.10' make[2]: Leaving directory '/build/ibus-anthy-1.5.10' make[1]: Leaving directory '/build/ibus-anthy-1.5.10' debian/rules override_dh_install make[1]: Entering directory '/build/ibus-anthy-1.5.10' dh_install -X.la -X.pyc -X.pyo find . -name "*.la" -delete make[1]: Leaving directory '/build/ibus-anthy-1.5.10' dh_installdocs dh_installchangelogs dh_python3 dh_installgsettings dh_lintian dh_icons dh_perl dh_link dh_strip_nondeterminism Normalized debian/ibus-anthy/usr/share/locale/el/LC_MESSAGES/ibus-anthy.mo Normalized debian/ibus-anthy/usr/share/locale/fr/LC_MESSAGES/ibus-anthy.mo Normalized debian/ibus-anthy/usr/share/locale/ca/LC_MESSAGES/ibus-anthy.mo Normalized debian/ibus-anthy/usr/share/locale/es/LC_MESSAGES/ibus-anthy.mo Normalized debian/ibus-anthy/usr/share/locale/zh_CN/LC_MESSAGES/ibus-anthy.mo Normalized debian/ibus-anthy/usr/share/locale/cs/LC_MESSAGES/ibus-anthy.mo Normalized debian/ibus-anthy/usr/share/locale/pt_BR/LC_MESSAGES/ibus-anthy.mo Normalized debian/ibus-anthy/usr/share/locale/ja/LC_MESSAGES/ibus-anthy.mo Normalized debian/ibus-anthy/usr/share/locale/uk/LC_MESSAGES/ibus-anthy.mo dh_compress dh_fixperms debian/rules override_dh_missing make[1]: Entering directory '/build/ibus-anthy-1.5.10' dh_missing --fail-missing make[1]: Leaving directory '/build/ibus-anthy-1.5.10' dh_strip dh_makeshlibs dh_shlibdeps dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/ibus-anthy/usr/lib/i386-linux-gnu/libanthygobject-1.0.so.5.0.510 was not linked against libanthydic.so.1 (it uses none of the library's symbols) dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'ibus-anthy-dev' in '../ibus-anthy-dev_1.5.10-2_i386.deb'. dpkg-deb: building package 'ibus-anthy-dbgsym' in '../ibus-anthy-dbgsym_1.5.10-2_i386.deb'. dpkg-deb: building package 'ibus-anthy' in '../ibus-anthy_1.5.10-2_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../ibus-anthy_1.5.10-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-source: info: using options from ibus-anthy-1.5.10/debian/source/options: --extend-diff-ignore=^setup/anthyprefs.py$ dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/44758 and its subdirectories I: Current time: Fri May 14 15:35:34 -12 2021 I: pbuilder-time-stamp: 1621049734