I: pbuilder: network access will be disabled during build I: Current time: Mon May 25 07:49:08 -12 2020 I: pbuilder-time-stamp: 1590436148 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libfile-util-perl_4.161950-1.dsc] I: copying [./libfile-util-perl_4.161950.orig.tar.gz] I: copying [./libfile-util-perl_4.161950-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Aug 6 01:51:44 2016 -12 gpgv: using RSA key BB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libfile-util-perl_4.161950-1.dsc dpkg-source: info: extracting libfile-util-perl in libfile-util-perl-4.161950 dpkg-source: info: unpacking libfile-util-perl_4.161950.orig.tar.gz dpkg-source: info: unpacking libfile-util-perl_4.161950-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), libmodule-build-perl, libunicode-utf8-perl, libtest-nowarnings-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libmodule-build-perl; however: Package libmodule-build-perl is not installed. pbuilder-satisfydepends-dummy depends on libunicode-utf8-perl; however: Package libunicode-utf8-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-nowarnings-perl; however: Package libtest-nowarnings-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libmodule-build-perl{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtest-nowarnings-perl{a} libtool{a} libuchardet0{a} libunicode-utf8-perl{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl libmodule-signature-perl libpod-readme-perl libsoftware-license-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 18.5 MB of archives. After unpacking 64.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libmodule-build-perl all 0.422400-1 [259 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libtest-nowarnings-perl all 1.04-2 [12.2 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libunicode-utf8-perl armhf 0.62-1 [19.0 kB] Fetched 18.5 MB in 2s (8872 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libmodule-build-perl. Preparing to unpack .../33-libmodule-build-perl_0.422400-1_all.deb ... Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl' Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl' Unpacking libmodule-build-perl (0.422400-1) ... Selecting previously unselected package libtest-nowarnings-perl. Preparing to unpack .../34-libtest-nowarnings-perl_1.04-2_all.deb ... Unpacking libtest-nowarnings-perl (1.04-2) ... Selecting previously unselected package libunicode-utf8-perl. Preparing to unpack .../35-libunicode-utf8-perl_0.62-1_armhf.deb ... Unpacking libunicode-utf8-perl (0.62-1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libunicode-utf8-perl (0.62-1) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libtest-nowarnings-perl (1.04-2) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up libmodule-build-perl (0.422400-1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libfile-util-perl-4.161950/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libfile-util-perl dpkg-buildpackage: info: source version 4.161950-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Nick Morrott dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Build.PL --installdirs vendor --config "optimize=-g -O2 -ffile-prefix-map=/build/libfile-util-perl-4.161950=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libfile-util-perl-4.161950=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'File-Util' version '4.161950' dh_auto_build perl Build Building File-Util dh_auto_test perl Build test --verbose 1 t/00-compile.t .................. 1..7 ok 1 - File/Util.pm loaded ok ok 2 - File/Util/Definitions.pm loaded ok ok 3 - File/Util/Exception.pm loaded ok ok 4 - File/Util/Exception/Diagnostic.pm loaded ok ok 5 - File/Util/Exception/Standard.pm loaded ok ok 6 - File/Util/Interface/Classic.pm loaded ok ok 7 - File/Util/Interface/Modern.pm loaded ok ok # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ------ # ExtUtils::MakeMaker any 7.34 # Module::Build 0.28 0.4224 # # === Build Requires === # # Module Want Have # ------------- ---- ------ # Module::Build 0.28 0.4224 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # AutoLoader any 5.74 # Config any 5.028001 # Cwd any 3.74 # Exporter any 5.73 # ExtUtils::MakeMaker any 7.34 # Fcntl any 1.13 # File::Spec any 3.74 # File::Temp any 0.2304 # IO::Handle any 1.39 # IPC::Open3 any 1.20 # Module::Build 0.28 0.4224 # Scalar::Util any 1.50 # Test any 1.31 # Test::More any 1.302133 # Test::NoWarnings any 1.04 # blib 1.01 1.07 # utf8 any 1.21 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------ ---- ---- # Exporter any 5.73 # Fcntl any 1.13 # Scalar::Util any 1.50 # constant any 1.33 # lib any 0.64 # strict any 1.11 # subs any 1.03 # vars any 1.04 # warnings any 1.42 # # === Runtime Recommends === # # Module Want Have # ------------- ---- ---- # Unicode::UTF8 0.58 0.62 # t/00-report-prereqs.t ........... 1..1 ok 1 ok t/001_canuseit.t ................ 1..2 ok 1 - New bare File::Util instantiation ok 2 - no warnings ok t/002_isa.t ..................... 1..2 ok 1 - ISA File::Util bless matches namespace ok 2 - no warnings ok t/003_can.t ..................... 1..41 ok 1 - can _dropdots ok 2 - can _release ok 3 - can _seize ok 4 - can atomize_path ok 5 - can bitmask ok 6 - can can_flock ok 7 - can can_read ok 8 - can can_write ok 9 - can created ok 10 - can diagnostic ok 11 - can ebcdic ok 12 - can escape_filename ok 13 - can existent ok 14 - can file_type ok 15 - can isbin ok 16 - can is_bin ok 17 - can is_readable ok 18 - can is_writable ok 19 - can last_access ok 20 - can last_modified ok 21 - can line_count ok 22 - can list_dir ok 23 - can load_dir ok 24 - can load_file ok 25 - can flock_rules ok 26 - can make_dir ok 27 - can abort_depth ok 28 - can needs_binmode ok 29 - can new ok 30 - can open_handle ok 31 - can readlimit ok 32 - can read_limit ok 33 - can size ok 34 - can strip_path ok 35 - can trunc ok 36 - can use_flock ok 37 - can write_file ok 38 - can valid_filename ok 39 - can VERSION ok 40 - can DESTROY ok 41 - no warnings ok t/004_portable.t ................ 1..50 ok 1 - NL constant matches variable ok 2 - SL constant matches variable ok 3 - escaped filename with custom escape ok 4 - escaped filename with defaults ok 5 - stripped path to this file OK ok 6 - stripped path to abs win path OK ok 7 - stripped path to deeper abs win path OK ok 8 - ?foo is NOT a valid filename ok 9 - >foo is NOT a valid filename ok 10 - write_file ok 13 - line count of new file is right ok 14 - truncate file, then make sure it is zero bytes ok 15 - truncated file linecount is zero ok 16 - make a deep directory tree ok 17 - no warnings ok t/007_flock.t ................... 1..10 ok 1 - File::Util correctly detects flock() support ok 2 - test flock on ok 3 - test on toggle ok 4 - test off toggle ok 5 - test toggled off ok 6 - test toggle back on ok 7 - expecting NOBLOCKEX FAIL ok 8 - expecting NOBLOCKEX ZERO ok 9 - contending flock OPs must fail ok 10 - no warnings ok t/008_export_ok.t ............... 1..33 ok 1 - can do exported NL ok 2 - can do exported can_flock ok 3 - can do exported ebcdic ok 4 - can do exported existent ok 5 - can do exported needs_binmode ok 6 - can do exported SL ok 7 - can do exported strip_path ok 8 - can do exported is_readable ok 9 - can do exported is_writable ok 10 - can do exported valid_filename ok 11 - can do exported OS ok 12 - can do exported bitmask ok 13 - can do exported return_path ok 14 - can do exported file_type ok 15 - can do exported escape_filename ok 16 - can do exported is_bin ok 17 - can do exported created ok 18 - can do exported last_access ok 19 - can do exported last_changed ok 20 - can do exported last_modified ok 21 - can do exported isbin ok 22 - can do exported split_path ok 23 - can do exported atomize_path ok 24 - can do exported diagnostic ok 25 - can do exported abort_depth ok 26 - can do exported size ok 27 - can do exported can_read ok 28 - can do exported can_write ok 29 - can do exported read_limit ok 30 - can do exported can_utf8 ok 31 - can do exported default_path ok 32 - can do exported strict_path ok 33 - no warnings ok t/009_empty_subclass.t .......... 1..33 ok 1 - Empty subclass can NL ok 2 - Empty subclass can can_flock ok 3 - Empty subclass can ebcdic ok 4 - Empty subclass can existent ok 5 - Empty subclass can needs_binmode ok 6 - Empty subclass can SL ok 7 - Empty subclass can strip_path ok 8 - Empty subclass can is_readable ok 9 - Empty subclass can is_writable ok 10 - Empty subclass can valid_filename ok 11 - Empty subclass can OS ok 12 - Empty subclass can bitmask ok 13 - Empty subclass can return_path ok 14 - Empty subclass can file_type ok 15 - Empty subclass can escape_filename ok 16 - Empty subclass can is_bin ok 17 - Empty subclass can created ok 18 - Empty subclass can last_access ok 19 - Empty subclass can last_changed ok 20 - Empty subclass can last_modified ok 21 - Empty subclass can isbin ok 22 - Empty subclass can split_path ok 23 - Empty subclass can atomize_path ok 24 - Empty subclass can diagnostic ok 25 - Empty subclass can abort_depth ok 26 - Empty subclass can size ok 27 - Empty subclass can can_read ok 28 - Empty subclass can can_write ok 29 - Empty subclass can read_limit ok 30 - Empty subclass can can_utf8 ok 31 - Empty subclass can default_path ok 32 - Empty subclass can strict_path ok 33 - no warnings ok t/010_unicode.t ................. 1..8 ok 1 - file touched and read as UTF-8 strict ok 2 - file written and read as UTF-8 strict ok 3 - file written via file handle API and read as UTF-8 strict ok 4 - writing unicode to a ":raw" filehandle fails ok 5 - unicode written and read in :raw mode returns non-UTF-8 string ok 6 - unicode written in :raw and read in UTF-8 strict still treated as UTF-8 ok 7 - filehandle opened in UTF-8 strict, then lines read as UTF-8 strings ok 8 - no warnings ok t/011_abspaths.t ................ 1..3 ok 1 - write file with abs path ok 2 - file content matches ok 3 - no warnings ok t/012_atomize_path.t ............ 1..37 ok 1 - atomized root matches "D:\" ok 2 - atomized path matches "" ok 3 - atomized filename matches "" ok 4 - atomized root matches "" ok 5 - atomized path matches "..\woot" ok 6 - atomized filename matches "noot.doc" ok 7 - atomized root matches "/" ok 8 - atomized path matches "foo/bar" ok 9 - atomized filename matches "baz.txt" ok 10 - atomized root matches "/" ok 11 - atomized path matches "" ok 12 - atomized filename matches "root" ok 13 - atomized root matches "" ok 14 - atomized path matches "../wibble" ok 15 - atomized filename matches "wombat.ini" ok 16 - atomized root matches "C:\" ok 17 - atomized path matches "foo\bar" ok 18 - atomized filename matches "baz.txt" ok 19 - atomized root matches "/" ok 20 - atomized path matches "etc" ok 21 - atomized filename matches "sudoers" ok 22 - atomized root matches "/" ok 23 - atomized path matches "" ok 24 - atomized filename matches "" ok 25 - atomized root matches ":" ok 26 - atomized path matches "a:b:c:d:e:f" ok 27 - atomized filename matches "g.txt" ok 28 - atomized root matches "" ok 29 - atomized path matches "../.." ok 30 - atomized filename matches "zoot.conf" ok 31 - atomized root matches "D:\" ok 32 - atomized path matches "" ok 33 - atomized filename matches "autorun.inf" ok 34 - atomized root matches "" ok 35 - atomized path matches "./a/b/c/d/e/f" ok 36 - atomized filename matches "g.txt" ok 37 - no warnings ok t/013_interface_classic.t ....... 1..14 ok 1 - _myargs() understands a flat list ok 2 - ...and knows what to do in list context ok 3 - ...and knows what to do in scalar context ok 4 - _remove_opts() ignores non-opts type single arg, and returns undef ok 5 - ...and returns undef if given undef ok 6 - ...and ignores non-opts type multi arg list, and returns undef ok 7 - ...and recognizes + returns --name=value pairs, --flags, and --empty= ok 8 - ...same test as above, with different input ok 9 - ...and recognizes args-as-listref, works right even with some bad args ok 10 - _names_values() converts even-numbered args list to balanced hashref ok 11 - ...and sets final name-value pair to value=undef for unbalanced lists ok 12 - ...and ignores name-value pair in balanced list when name itself is undef ok 13 - ::DESTROY() returns undef ok 14 - no warnings ok t/014_interface_modern.t ........ 1..29 ok 1 - _myargs() understands a flat list ok 2 - ...and knows what to do in list context ok 3 - ...and knows what to do in scalar context ok 4 - $ftl->_remove_opts() ignores non-opts type single arg, and returns undef ok 5 - ...and ignores non-opts type multi arg list, and returns undef ok 6 - ...and recognizes + returns --name=value pairs, --flags, and --empty= ok 7 - ...and still does the same with some slightly different input ok 8 - ...and works right even with some bad args ok 9 - $ftl->_names_values() converts even-numbered args list to balanced hashref ok 10 - ...and sets final name-value pair to value=undef for unbalanced lists ok 11 - ...and ignores name-value pair in balanced list when name itself is undef ok 12 - $ftl->_remove_opts() recognizes + returns { name => value } pairs, and flags ok 13 - ...and does the same with slightly different input ok 14 - ...and returns undef if given no args ok 15 - ...and returns undef if given undef ok 16 - ...and returns empty hashref if given listref of falsies ok 17 - ...and returns an empty hashref if given an empty listref of args ok 18 - ...and still does the same if args list contains multiple hashrefs ok 19 - ...and still does the same if args list is interspersed with undef's ok 20 - $ftl->_names_values() compares perfectly from input hashref to args hashref ok 21 - ...and returns an empty hashref if given no args ok 22 - ...and returns an empty hashref if given an empty hashref as only arg ok 23 - $ftl->_parse_in() and understands a hashref ok 24 - ...and returns an empty hashref if given no args ok 25 - ...and does the same if given an empty hashref ok 26 - ...and understands and amalgamates a list of hashrefs ok 27 - ...and understands a mixture of old and new style input args ok 28 - ::DESTROY() returns undef ok 29 - no warnings ok t/015_destroy.t ................. 1..8 ok 1 - File::Util::DESTROY() returns as expected ok 2 - File::Util::Definitions::DESTROY() returns as expected ok 3 - File::Util::Interface::Classic::DESTROY() returns as expected ok 4 - File::Util::Interface::Modern::DESTROY() returns as expected ok 5 - File::Util::Exception::DESTROY() returns as expected ok 6 - File::Util::Exception::Standard::DESTROY() returns as expected ok 7 - File::Util::Exception::Diagnostic::DESTROY() returns as expected ok 8 - no warnings ok t/016_new.t ..................... 1..30 ok 1 - new() is blessed correctly after flock toggle invocation ok 2 - flock off-toggle sticks after blessing ok 3 - new() is blessed correctly after readlimit-set invocation ok 4 - readlimit (legacy) setting sticks after blessing ok 5 - read_limit (new-style) setting sticks after blessing ok 6 - new() is blessed right after abort_depth-set invocation ok 7 - abort_depth toggle sticks after abort_depth-set invocation ok 8 - new() blessed right with multi-toggle ok 9 - use_flock sticks after multi-toggle ok 10 - readlimit (legacy) sticks after multi-toggle blessing ok 11 - read_limit (new-style) sticks after multi-toggle blessing ok 12 - abort_depth sticks after multi-toggle blessing ok 13 - new() blessed right with fatals toggle ok 14 - modern internal setting matches toggle ok 15 - classic internal setting matches toggle ok 16 - blessed ok after classic instantiation ok 17 - peek at internals looks good for "fatals_as_status" ok 18 - peek at internals looks good for "--fatals_as_status" ok 19 - blessed ok after classic instantiation ok 20 - peek at internals looks good for "fatals_as_errmsg" ok 21 - peek at internals looks good for "--fatals-as-errmsg" ok 22 - blessed ok after modern instantiation with multiple opts ok 23 - flock toggle correct after modern multi-opt instantiation ok 24 - readlimit setting correct after modern multi-opt instantiation ok 25 - abort_depth setting correct after modern multi-opt instantiation ok 26 - peek at internals ok for "fatals_as_status" ok 27 - peek at internals ok for "warn_also" ok 28 - peek at internals ok for !defined "fatals_as_warning" ok 29 - peek at internals ok for !defined "fatals_as_errmsg" ok 30 - no warnings ok t/017_make_dir_list_dir.t ....... 1..25 ok 1 - create files in a directory that does not exist beforehand ok 2 - create files in a directory that does not exist beforehand ok 3 - create files in a directory that does not exist beforehand ok 4 - create files in a directory that does not exist beforehand ok 5 - create files in a directory that does not exist beforehand ok 6 - create files in a directory that does not exist beforehand ok 7 - create files in a directory that does not exist beforehand ok 8 - create files in a directory that does not exist beforehand ok 9 - test recursive listing with classic call style arguments ok 10 - make a deeper directory ok 11 - create files in a abs path directory that already exists ok 12 - create files in a abs path directory that already exists ok 13 - create files in a abs path directory that already exists ok 14 - create files in a abs path directory that already exists ok 15 - create files in a abs path directory that already exists ok 16 - create files in a abs path directory that already exists ok 17 - create files in a abs path directory that already exists ok 18 - create files in a abs path directory that already exists ok 19 - test recursive file listing with modern call style ok 20 - test recursive file listing with classic call style ok 21 - same, but using modern call style, stripped of fully qualified paths ok 22 - same, but using intentionally wrong modern call style, stripped of fully qualified paths ok 23 - compare recursive listing to recursive callback return ok 24 # skip these tests are for testing by the author and only run on Unix/Linux ok 25 - no warnings ok t/018_list_dir_advancedmatch.t .. 1..19 ok 1 - legacy recursive file match (rpattern="...") ok 2 - recursive files_match ok 3 - recursive OR files_match ok 4 - recursive AND files_match ok 5 - recursive dirs_match ok 6 - recursive dirs_match + files_match ok 7 - recursive OR dirs_match + AND files_match ok 8 - a different recursive OR dirs_match + AND files_match ok 9 - recursive AND parent_matches + AND files_match ok 10 - recursive single arg parent_matches + single arg files_match ok 11 - a different recursive single arg parent_matches + single arg files_match ok 12 - recursive single arg parent_matches + legacy files match (rpattern="...") ok 13 - recursive OR parent_matches + single arg files_match ok 14 - recursive AND path_matches ok 15 - recursive OR path_matches ok 16 - recursive AND path_matches that should return an empty list ok 17 - recursive OR path_matches returning only directories ok 18 - recursive single arg path_matches returning only directories ok 19 - no warnings ok t/019_load_dir.t ................ 1..4 ok 1 - load_dir() loads directory into hashref ok 2 - load_dir() loads directory into listref ok 3 - load_dir() loads directory into list ok 4 - no warnings ok t/020_write_file.t .............. 1..4 ok 1 - write_file writes right w/ ref args ok 2 - write_file writes right w/ 2 args ok 3 - write_file appends right w/ 2 args + opts hashref ok 4 - no warnings ok t/021_list_dir_regression.t ..... 1..2 ok 1 - regression: plain dir listing with only subdirs present (no files) ok 2 - no warnings ok All tests successful. Files=23, Tests=415, 7 wallclock secs ( 0.26 usr 0.06 sys + 6.04 cusr 0.67 csys = 7.03 CPU) Result: PASS fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install perl Build install --destdir /build/libfile-util-perl-4.161950/debian/libfile-util-perl --create_packlist 0 Building File-Util Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util.pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util/Cookbook.pod Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util/Exception.pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util/Definitions.pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util/Manual.pod Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util/Interface/Modern.pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util/Interface/Classic.pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util/Exception/Diagnostic.pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util/Exception/Standard.pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/perl5/File/Util/Manual/Examples.pod Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util::Cookbook.3pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util::Interface::Classic.3pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util::Exception.3pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util::Manual::Examples.3pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util.3pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util::Exception::Standard.3pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util::Definitions.3pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util::Exception::Diagnostic.3pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util::Manual.3pm Installing /build/libfile-util-perl-4.161950/debian/libfile-util-perl/usr/share/man/man3/File::Util::Interface::Modern.3pm dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libfile-util-perl' in '../libfile-util-perl_4.161950-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libfile-util-perl_4.161950-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/31042 and its subdirectories I: Current time: Mon May 25 07:50:41 -12 2020 I: pbuilder-time-stamp: 1590436241