I: pbuilder: network access will be disabled during build I: Current time: Wed May 20 22:00:00 -12 2020 I: pbuilder-time-stamp: 1590055200 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libcache-memcached-fast-perl_0.25-1.dsc] I: copying [./libcache-memcached-fast-perl_0.25.orig.tar.gz] I: copying [./libcache-memcached-fast-perl_0.25-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Mon Oct 23 07:41:36 2017 -12 gpgv: using RSA key AEA0C44ECB056E93630D9D33DBBE9D4D99D2A004 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libcache-memcached-fast-perl_0.25-1.dsc dpkg-source: info: extracting libcache-memcached-fast-perl in libcache-memcached-fast-perl-0.25 dpkg-source: info: unpacking libcache-memcached-fast-perl_0.25.orig.tar.gz dpkg-source: info: unpacking libcache-memcached-fast-perl_0.25-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: cdbs, devscripts, perl, debhelper (>= 9), dh-buildinfo, memcached dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on devscripts; however: Package devscripts is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-buildinfo; however: Package dh-buildinfo is not installed. pbuilder-satisfydepends-dummy depends on memcached; however: Package memcached is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} ca-certificates{a} cdbs{a} debhelper{a} devscripts{a} dh-autoreconf{a} dh-buildinfo{a} dh-strip-nondeterminism{a} dirmngr{a} dwz{a} file{a} gettext{a} gettext-base{a} gnupg{a} gnupg-l10n{a} gnupg-utils{a} gpg{a} gpg-agent{a} gpg-wks-client{a} gpg-wks-server{a} gpgconf{a} gpgsm{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libassuan0{a} libb-hooks-op-check-perl{a} libbsd0{a} libclass-method-modifiers-perl{a} libcroco3{a} libdevel-callchecker-perl{a} libdevel-globaldestruction-perl{a} libdynaloader-functions-perl{a} libelf1{a} libencode-locale-perl{a} libevent-2.1-6{a} libexpat1{a} libfile-homedir-perl{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libfile-which-perl{a} libglib2.0-0{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libicu63{a} libimport-into-perl{a} libio-html-perl{a} libio-pty-perl{a} libio-socket-ssl-perl{a} libipc-run-perl{a} libksba8{a} libldap-2.4-2{a} libldap-common{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1{a} libmodule-runtime-perl{a} libmoo-perl{a} libmpdec2{a} libncurses6{a} libnet-http-perl{a} libnet-ssleay-perl{a} libnpth0{a} libparams-classify-perl{a} libpipeline1{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} librole-tiny-perl{a} libsasl2-2{a} libsasl2-modules-db{a} libsigsegv2{a} libssl1.1{a} libstrictures-perl{a} libsub-exporter-progressive-perl{a} libsub-quote-perl{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libxml2{a} lsb-base{a} m4{a} man-db{a} memcached{a} mime-support{a} netbase{a} openssl{a} patchutils{a} perl-openssl-defaults{a} pinentry-curses{a} po-debconf{a} python3{a} python3-minimal{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} wdiff{a} The following packages are RECOMMENDED but will NOT be installed: at curl dctrl-tools debian-keyring dput dput-ng dupload equivs libarchive-cpio-perl libclass-xsaccessor-perl libdata-dump-perl libdistro-info-perl libgit-wrapper-perl libgitlab-api-v4-perl libglib2.0-data libgpm2 libhtml-form-perl libhtml-format-perl libhttp-daemon-perl liblist-compare-perl libltdl-dev libmail-sendmail-perl libmailtools-perl libsasl2-modules libsoap-lite-perl libstring-shellquote-perl libsub-name-perl licensecheck lintian lynx python3-apt python3-debian python3-magic python3-requests python3-unidiff python3-xdg shared-mime-info strace unzip wget xdg-user-dirs 0 packages upgraded, 113 newly installed, 0 to remove and 0 not upgraded. Need to get 35.8 MB of archives. After unpacking 111 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libpython3.7-minimal armhf 3.7.3-2+deb10u1 [582 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libexpat1 armhf 2.2.6-2+deb10u1 [78.0 kB] Get: 10 http://deb.debian.org/debian buster/main armhf python3.7-minimal armhf 3.7.3-2+deb10u1 [1465 kB] Get: 11 http://deb.debian.org/debian buster/main armhf python3-minimal armhf 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main armhf mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libmpdec2 armhf 2.4.2-2 [69.3 kB] Get: 14 http://deb.debian.org/debian buster/main armhf readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main armhf libreadline7 armhf 7.0-5 [131 kB] Get: 16 http://deb.debian.org/debian buster/main armhf libpython3.7-stdlib armhf 3.7.3-2+deb10u1 [1660 kB] Get: 17 http://deb.debian.org/debian buster/main armhf python3.7 armhf 3.7.3-2+deb10u1 [330 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libpython3-stdlib armhf 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main armhf python3 armhf 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main armhf netbase all 5.6 [19.4 kB] Get: 21 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 24 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 25 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 27 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 28 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 29 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 30 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 31 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 32 http://deb.debian.org/debian buster/main armhf openssl armhf 1.1.1d-0+deb10u3 [818 kB] Get: 33 http://deb.debian.org/debian buster/main armhf ca-certificates all 20190110 [157 kB] Get: 34 http://deb.debian.org/debian buster/main armhf cdbs all 0.4.159 [83.7 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 36 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 39 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 41 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 43 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 44 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 45 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 46 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 47 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 48 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 49 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 50 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 51 http://deb.debian.org/debian buster/main armhf libassuan0 armhf 2.5.2-1 [42.8 kB] Get: 52 http://deb.debian.org/debian buster/main armhf gpgconf armhf 2.2.12-1+deb10u1 [492 kB] Get: 53 http://deb.debian.org/debian buster/main armhf lsb-base all 10.2019051400 [28.4 kB] Get: 54 http://deb.debian.org/debian buster/main armhf libksba8 armhf 1.3.5-2 [85.9 kB] Get: 55 http://deb.debian.org/debian buster/main armhf libsasl2-modules-db armhf 2.1.27+dfsg-1+deb10u1 [67.4 kB] Get: 56 http://deb.debian.org/debian buster/main armhf libsasl2-2 armhf 2.1.27+dfsg-1+deb10u1 [98.9 kB] Get: 57 http://deb.debian.org/debian buster/main armhf libldap-common all 2.4.47+dfsg-3+deb10u2 [89.7 kB] Get: 58 http://deb.debian.org/debian buster/main armhf libldap-2.4-2 armhf 2.4.47+dfsg-3+deb10u2 [202 kB] Get: 59 http://deb.debian.org/debian buster/main armhf libnpth0 armhf 1.6-1 [17.4 kB] Get: 60 http://deb.debian.org/debian buster/main armhf dirmngr armhf 2.2.12-1+deb10u1 [669 kB] Get: 61 http://deb.debian.org/debian buster/main armhf gnupg-l10n all 2.2.12-1+deb10u1 [1010 kB] Get: 62 http://deb.debian.org/debian buster/main armhf gnupg-utils armhf 2.2.12-1+deb10u1 [788 kB] Get: 63 http://deb.debian.org/debian buster/main armhf gpg armhf 2.2.12-1+deb10u1 [804 kB] Get: 64 http://deb.debian.org/debian buster/main armhf pinentry-curses armhf 1.1.0-2 [59.8 kB] Get: 65 http://deb.debian.org/debian buster/main armhf gpg-agent armhf 2.2.12-1+deb10u1 [578 kB] Get: 66 http://deb.debian.org/debian buster/main armhf gpg-wks-client armhf 2.2.12-1+deb10u1 [469 kB] Get: 67 http://deb.debian.org/debian buster/main armhf gpg-wks-server armhf 2.2.12-1+deb10u1 [464 kB] Get: 68 http://deb.debian.org/debian buster/main armhf gpgsm armhf 2.2.12-1+deb10u1 [573 kB] Get: 69 http://deb.debian.org/debian buster/main armhf gnupg all 2.2.12-1+deb10u1 [715 kB] Get: 70 http://deb.debian.org/debian buster/main armhf libfile-which-perl all 1.23-1 [16.6 kB] Get: 71 http://deb.debian.org/debian buster/main armhf libfile-homedir-perl all 1.004-1 [42.7 kB] Get: 72 http://deb.debian.org/debian buster/main armhf libio-pty-perl armhf 1:1.08-1.1+b5 [32.9 kB] Get: 73 http://deb.debian.org/debian buster/main armhf libipc-run-perl all 20180523.0-1 [101 kB] Get: 74 http://deb.debian.org/debian buster/main armhf libclass-method-modifiers-perl all 2.12-1 [18.6 kB] Get: 75 http://deb.debian.org/debian buster/main armhf libsub-exporter-progressive-perl all 0.001013-1 [7588 B] Get: 76 http://deb.debian.org/debian buster/main armhf libdevel-globaldestruction-perl all 0.14-1 [8084 B] Get: 77 http://deb.debian.org/debian buster/main armhf libb-hooks-op-check-perl armhf 0.22-1+b1 [11.0 kB] Get: 78 http://deb.debian.org/debian buster/main armhf libdynaloader-functions-perl all 0.003-1 [12.6 kB] Get: 79 http://deb.debian.org/debian buster/main armhf libdevel-callchecker-perl armhf 0.008-1 [15.5 kB] Get: 80 http://deb.debian.org/debian buster/main armhf libparams-classify-perl armhf 0.015-1+b1 [24.2 kB] Get: 81 http://deb.debian.org/debian buster/main armhf libmodule-runtime-perl all 0.016-1 [19.4 kB] Get: 82 http://deb.debian.org/debian buster/main armhf libimport-into-perl all 1.002005-1 [11.6 kB] Get: 83 http://deb.debian.org/debian buster/main armhf librole-tiny-perl all 2.000006-1 [19.4 kB] Get: 84 http://deb.debian.org/debian buster/main armhf libstrictures-perl all 2.000005-1 [18.3 kB] Get: 85 http://deb.debian.org/debian buster/main armhf libsub-quote-perl all 2.005001-1 [17.9 kB] Get: 86 http://deb.debian.org/debian buster/main armhf libmoo-perl all 2.003004-2 [57.4 kB] Get: 87 http://deb.debian.org/debian buster/main armhf libencode-locale-perl all 1.05-1 [13.7 kB] Get: 88 http://deb.debian.org/debian buster/main armhf libtimedate-perl all 2.3000-2+deb10u1 [38.1 kB] Get: 89 http://deb.debian.org/debian buster/main armhf libhttp-date-perl all 6.02-1 [10.7 kB] Get: 90 http://deb.debian.org/debian buster/main armhf libfile-listing-perl all 6.04-1 [10.3 kB] Get: 91 http://deb.debian.org/debian buster/main armhf libhtml-tagset-perl all 3.20-3 [12.7 kB] Get: 92 http://deb.debian.org/debian buster/main armhf liburi-perl all 1.76-1 [89.9 kB] Get: 93 http://deb.debian.org/debian buster/main armhf libhtml-parser-perl armhf 3.72-3+b3 [102 kB] Get: 94 http://deb.debian.org/debian buster/main armhf libhtml-tree-perl all 5.07-2 [213 kB] Get: 95 http://deb.debian.org/debian buster/main armhf libio-html-perl all 1.001-1 [17.6 kB] Get: 96 http://deb.debian.org/debian buster/main armhf liblwp-mediatypes-perl all 6.02-1 [22.1 kB] Get: 97 http://deb.debian.org/debian buster/main armhf libhttp-message-perl all 6.18-1 [77.8 kB] Get: 98 http://deb.debian.org/debian buster/main armhf libhttp-cookies-perl all 6.04-1 [17.8 kB] Get: 99 http://deb.debian.org/debian buster/main armhf libhttp-negotiate-perl all 6.01-1 [12.8 kB] Get: 100 http://deb.debian.org/debian buster/main armhf perl-openssl-defaults armhf 3 [6782 B] Get: 101 http://deb.debian.org/debian buster/main armhf libnet-ssleay-perl armhf 1.85-2+b1 [288 kB] Get: 102 http://deb.debian.org/debian buster/main armhf libio-socket-ssl-perl all 2.060-3 [207 kB] Get: 103 http://deb.debian.org/debian buster/main armhf libnet-http-perl all 6.18-1 [24.5 kB] Get: 104 http://deb.debian.org/debian buster/main armhf liblwp-protocol-https-perl all 6.07-2 [9242 B] Get: 105 http://deb.debian.org/debian buster/main armhf libtry-tiny-perl all 0.30-1 [23.3 kB] Get: 106 http://deb.debian.org/debian buster/main armhf libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 107 http://deb.debian.org/debian buster/main armhf libwww-perl all 6.36-2 [188 kB] Get: 108 http://deb.debian.org/debian buster/main armhf patchutils armhf 0.3.4-2 [86.2 kB] Get: 109 http://deb.debian.org/debian buster/main armhf wdiff armhf 1.2.2-2+b1 [121 kB] Get: 110 http://deb.debian.org/debian buster/main armhf devscripts armhf 2.19.5+deb10u1 [1045 kB] Get: 111 http://deb.debian.org/debian buster/main armhf dh-buildinfo all 0.11+nmu2 [18.4 kB] Get: 112 http://deb.debian.org/debian buster/main armhf libevent-2.1-6 armhf 2.1.8-stable-4 [159 kB] Get: 113 http://deb.debian.org/debian buster/main armhf memcached armhf 1.5.6-1.1 [119 kB] Fetched 35.8 MB in 4s (8059 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../2-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../4-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u1) ... Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Setting up libexpat1:armhf (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_armhf.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../2-libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../4-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20288 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.3-1_armhf.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package netbase. Preparing to unpack .../01-netbase_5.6_all.deb ... Unpacking netbase (5.6) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../04-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../07-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../08-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../09-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../10-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../11-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../12-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package openssl. Preparing to unpack .../13-openssl_1.1.1d-0+deb10u3_armhf.deb ... Unpacking openssl (1.1.1d-0+deb10u3) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../14-ca-certificates_20190110_all.deb ... Unpacking ca-certificates (20190110) ... Selecting previously unselected package cdbs. Preparing to unpack .../15-cdbs_0.4.159_all.deb ... Unpacking cdbs (0.4.159) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../21-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../23-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../24-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../25-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../26-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../27-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libassuan0:armhf. Preparing to unpack .../32-libassuan0_2.5.2-1_armhf.deb ... Unpacking libassuan0:armhf (2.5.2-1) ... Selecting previously unselected package gpgconf. Preparing to unpack .../33-gpgconf_2.2.12-1+deb10u1_armhf.deb ... Unpacking gpgconf (2.2.12-1+deb10u1) ... Selecting previously unselected package lsb-base. Preparing to unpack .../34-lsb-base_10.2019051400_all.deb ... Unpacking lsb-base (10.2019051400) ... Selecting previously unselected package libksba8:armhf. Preparing to unpack .../35-libksba8_1.3.5-2_armhf.deb ... Unpacking libksba8:armhf (1.3.5-2) ... Selecting previously unselected package libsasl2-modules-db:armhf. Preparing to unpack .../36-libsasl2-modules-db_2.1.27+dfsg-1+deb10u1_armhf.deb ... Unpacking libsasl2-modules-db:armhf (2.1.27+dfsg-1+deb10u1) ... Selecting previously unselected package libsasl2-2:armhf. Preparing to unpack .../37-libsasl2-2_2.1.27+dfsg-1+deb10u1_armhf.deb ... Unpacking libsasl2-2:armhf (2.1.27+dfsg-1+deb10u1) ... Selecting previously unselected package libldap-common. Preparing to unpack .../38-libldap-common_2.4.47+dfsg-3+deb10u2_all.deb ... Unpacking libldap-common (2.4.47+dfsg-3+deb10u2) ... Selecting previously unselected package libldap-2.4-2:armhf. Preparing to unpack .../39-libldap-2.4-2_2.4.47+dfsg-3+deb10u2_armhf.deb ... Unpacking libldap-2.4-2:armhf (2.4.47+dfsg-3+deb10u2) ... Selecting previously unselected package libnpth0:armhf. Preparing to unpack .../40-libnpth0_1.6-1_armhf.deb ... Unpacking libnpth0:armhf (1.6-1) ... Selecting previously unselected package dirmngr. Preparing to unpack .../41-dirmngr_2.2.12-1+deb10u1_armhf.deb ... Unpacking dirmngr (2.2.12-1+deb10u1) ... Selecting previously unselected package gnupg-l10n. Preparing to unpack .../42-gnupg-l10n_2.2.12-1+deb10u1_all.deb ... Unpacking gnupg-l10n (2.2.12-1+deb10u1) ... Selecting previously unselected package gnupg-utils. Preparing to unpack .../43-gnupg-utils_2.2.12-1+deb10u1_armhf.deb ... Unpacking gnupg-utils (2.2.12-1+deb10u1) ... Selecting previously unselected package gpg. Preparing to unpack .../44-gpg_2.2.12-1+deb10u1_armhf.deb ... Unpacking gpg (2.2.12-1+deb10u1) ... Selecting previously unselected package pinentry-curses. Preparing to unpack .../45-pinentry-curses_1.1.0-2_armhf.deb ... Unpacking pinentry-curses (1.1.0-2) ... Selecting previously unselected package gpg-agent. Preparing to unpack .../46-gpg-agent_2.2.12-1+deb10u1_armhf.deb ... Unpacking gpg-agent (2.2.12-1+deb10u1) ... Selecting previously unselected package gpg-wks-client. Preparing to unpack .../47-gpg-wks-client_2.2.12-1+deb10u1_armhf.deb ... Unpacking gpg-wks-client (2.2.12-1+deb10u1) ... Selecting previously unselected package gpg-wks-server. Preparing to unpack .../48-gpg-wks-server_2.2.12-1+deb10u1_armhf.deb ... Unpacking gpg-wks-server (2.2.12-1+deb10u1) ... Selecting previously unselected package gpgsm. Preparing to unpack .../49-gpgsm_2.2.12-1+deb10u1_armhf.deb ... Unpacking gpgsm (2.2.12-1+deb10u1) ... Selecting previously unselected package gnupg. Preparing to unpack .../50-gnupg_2.2.12-1+deb10u1_all.deb ... Unpacking gnupg (2.2.12-1+deb10u1) ... Selecting previously unselected package libfile-which-perl. Preparing to unpack .../51-libfile-which-perl_1.23-1_all.deb ... Unpacking libfile-which-perl (1.23-1) ... Selecting previously unselected package libfile-homedir-perl. Preparing to unpack .../52-libfile-homedir-perl_1.004-1_all.deb ... Unpacking libfile-homedir-perl (1.004-1) ... Selecting previously unselected package libio-pty-perl. Preparing to unpack .../53-libio-pty-perl_1%3a1.08-1.1+b5_armhf.deb ... Unpacking libio-pty-perl (1:1.08-1.1+b5) ... Selecting previously unselected package libipc-run-perl. Preparing to unpack .../54-libipc-run-perl_20180523.0-1_all.deb ... Unpacking libipc-run-perl (20180523.0-1) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../55-libclass-method-modifiers-perl_2.12-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.12-1) ... Selecting previously unselected package libsub-exporter-progressive-perl. Preparing to unpack .../56-libsub-exporter-progressive-perl_0.001013-1_all.deb ... Unpacking libsub-exporter-progressive-perl (0.001013-1) ... Selecting previously unselected package libdevel-globaldestruction-perl. Preparing to unpack .../57-libdevel-globaldestruction-perl_0.14-1_all.deb ... Unpacking libdevel-globaldestruction-perl (0.14-1) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../58-libb-hooks-op-check-perl_0.22-1+b1_armhf.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../59-libdynaloader-functions-perl_0.003-1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../60-libdevel-callchecker-perl_0.008-1_armhf.deb ... Unpacking libdevel-callchecker-perl (0.008-1) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../61-libparams-classify-perl_0.015-1+b1_armhf.deb ... Unpacking libparams-classify-perl (0.015-1+b1) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../62-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../63-libimport-into-perl_1.002005-1_all.deb ... Unpacking libimport-into-perl (1.002005-1) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../64-librole-tiny-perl_2.000006-1_all.deb ... Unpacking librole-tiny-perl (2.000006-1) ... Selecting previously unselected package libstrictures-perl. Preparing to unpack .../65-libstrictures-perl_2.000005-1_all.deb ... Unpacking libstrictures-perl (2.000005-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../66-libsub-quote-perl_2.005001-1_all.deb ... Unpacking libsub-quote-perl (2.005001-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../67-libmoo-perl_2.003004-2_all.deb ... Unpacking libmoo-perl (2.003004-2) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../68-libencode-locale-perl_1.05-1_all.deb ... Unpacking libencode-locale-perl (1.05-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../69-libtimedate-perl_2.3000-2+deb10u1_all.deb ... Unpacking libtimedate-perl (2.3000-2+deb10u1) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../70-libhttp-date-perl_6.02-1_all.deb ... Unpacking libhttp-date-perl (6.02-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../71-libfile-listing-perl_6.04-1_all.deb ... Unpacking libfile-listing-perl (6.04-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../72-libhtml-tagset-perl_3.20-3_all.deb ... Unpacking libhtml-tagset-perl (3.20-3) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../73-liburi-perl_1.76-1_all.deb ... Unpacking liburi-perl (1.76-1) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../74-libhtml-parser-perl_3.72-3+b3_armhf.deb ... Unpacking libhtml-parser-perl (3.72-3+b3) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../75-libhtml-tree-perl_5.07-2_all.deb ... Unpacking libhtml-tree-perl (5.07-2) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../76-libio-html-perl_1.001-1_all.deb ... Unpacking libio-html-perl (1.001-1) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../77-liblwp-mediatypes-perl_6.02-1_all.deb ... Unpacking liblwp-mediatypes-perl (6.02-1) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../78-libhttp-message-perl_6.18-1_all.deb ... Unpacking libhttp-message-perl (6.18-1) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../79-libhttp-cookies-perl_6.04-1_all.deb ... Unpacking libhttp-cookies-perl (6.04-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../80-libhttp-negotiate-perl_6.01-1_all.deb ... Unpacking libhttp-negotiate-perl (6.01-1) ... Selecting previously unselected package perl-openssl-defaults:armhf. Preparing to unpack .../81-perl-openssl-defaults_3_armhf.deb ... Unpacking perl-openssl-defaults:armhf (3) ... Selecting previously unselected package libnet-ssleay-perl. Preparing to unpack .../82-libnet-ssleay-perl_1.85-2+b1_armhf.deb ... Unpacking libnet-ssleay-perl (1.85-2+b1) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../83-libio-socket-ssl-perl_2.060-3_all.deb ... Unpacking libio-socket-ssl-perl (2.060-3) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../84-libnet-http-perl_6.18-1_all.deb ... Unpacking libnet-http-perl (6.18-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../85-liblwp-protocol-https-perl_6.07-2_all.deb ... Unpacking liblwp-protocol-https-perl (6.07-2) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../86-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../87-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../88-libwww-perl_6.36-2_all.deb ... Unpacking libwww-perl (6.36-2) ... Selecting previously unselected package patchutils. Preparing to unpack .../89-patchutils_0.3.4-2_armhf.deb ... Unpacking patchutils (0.3.4-2) ... Selecting previously unselected package wdiff. Preparing to unpack .../90-wdiff_1.2.2-2+b1_armhf.deb ... Unpacking wdiff (1.2.2-2+b1) ... Selecting previously unselected package devscripts. Preparing to unpack .../91-devscripts_2.19.5+deb10u1_armhf.deb ... Unpacking devscripts (2.19.5+deb10u1) ... Selecting previously unselected package dh-buildinfo. Preparing to unpack .../92-dh-buildinfo_0.11+nmu2_all.deb ... Unpacking dh-buildinfo (0.11+nmu2) ... Selecting previously unselected package libevent-2.1-6:armhf. Preparing to unpack .../93-libevent-2.1-6_2.1.8-stable-4_armhf.deb ... Unpacking libevent-2.1-6:armhf (2.1.8-stable-4) ... Selecting previously unselected package memcached. Preparing to unpack .../94-memcached_1.5.6-1.1_armhf.deb ... Unpacking memcached (1.5.6-1.1) ... Setting up libksba8:armhf (1.3.5-2) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up wdiff (1.2.2-2+b1) ... Setting up lsb-base (10.2019051400) ... Setting up libfile-which-perl (1.23-1) ... Setting up mime-support (3.62) ... Setting up libdynaloader-functions-perl (0.003-1) ... Setting up libclass-method-modifiers-perl (2.12-1) ... Setting up libio-pty-perl (1:1.08-1.1+b5) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libhtml-tagset-perl (3.20-3) ... Setting up liblwp-mediatypes-perl (6.02-1) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up perl-openssl-defaults:armhf (3) ... Setting up gettext-base (0.19.8.1-9) ... Setting up libencode-locale-perl (1.05-1) ... Setting up libnpth0:armhf (1.6-1) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libassuan0:armhf (2.5.2-1) ... Setting up libldap-common (2.4.47+dfsg-3+deb10u2) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up libsasl2-modules-db:armhf (2.1.27+dfsg-1+deb10u1) ... Setting up patchutils (0.3.4-2) ... Setting up autotools-dev (20180224.1) ... Setting up gnupg-l10n (2.2.12-1+deb10u1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libio-html-perl (1.001-1) ... Setting up autopoint (0.19.8.1-9) ... Setting up libb-hooks-op-check-perl (0.22-1+b1) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up libsasl2-2:armhf (2.1.27+dfsg-1+deb10u1) ... Setting up libevent-2.1-6:armhf (2.1.8-stable-4) ... Setting up libsub-exporter-progressive-perl (0.001013-1) ... Setting up libtimedate-perl (2.3000-2+deb10u1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up librole-tiny-perl (2.000006-1) ... Setting up libdevel-globaldestruction-perl (0.14-1) ... Setting up netbase (5.6) ... Setting up libstrictures-perl (2.000005-1) ... Setting up libsub-quote-perl (2.005001-1) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libfile-homedir-perl (1.004-1) ... Setting up openssl (1.1.1d-0+deb10u3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up cdbs (0.4.159) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up liburi-perl (1.76-1) ... Setting up libreadline7:armhf (7.0-5) ... Setting up gnupg-utils (2.2.12-1+deb10u1) ... Setting up libnet-ssleay-perl (1.85-2+b1) ... Setting up pinentry-curses (1.1.0-2) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libhttp-date-perl (6.02-1) ... Setting up libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Setting up libfile-listing-perl (6.04-1) ... Setting up libtool (2.4.6-9) ... Setting up libldap-2.4-2:armhf (2.4.47+dfsg-3+deb10u2) ... Setting up libnet-http-perl (6.18-1) ... Setting up m4 (1.4.18-2) ... Setting up libdevel-callchecker-perl (0.008-1) ... Setting up memcached (1.5.6-1.1) ... invoke-rc.d: could not determine current runlevel invoke-rc.d: policy-rc.d denied execution of start. Setting up ca-certificates (20190110) ... Updating certificates in /etc/ssl/certs... 128 added, 0 removed; done. Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libhtml-parser-perl (3.72-3+b3) ... Setting up gpgconf (2.2.12-1+deb10u1) ... Setting up libio-socket-ssl-perl (2.060-3) ... Setting up gpg (2.2.12-1+deb10u1) ... Setting up libpython3-stdlib:armhf (3.7.3-1) ... Setting up libhttp-message-perl (6.18-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u1) ... Setting up libhttp-negotiate-perl (6.01-1) ... Setting up gettext (0.19.8.1-9) ... Setting up gpg-agent (2.2.12-1+deb10u1) ... Setting up libhttp-cookies-perl (6.04-1) ... Setting up libhtml-tree-perl (5.07-2) ... Setting up libparams-classify-perl (0.015-1+b1) ... Setting up gpgsm (2.2.12-1+deb10u1) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up dirmngr (2.2.12-1+deb10u1) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up gpg-wks-server (2.2.12-1+deb10u1) ... Setting up gpg-wks-client (2.2.12-1+deb10u1) ... Setting up libimport-into-perl (1.002005-1) ... Setting up libmoo-perl (2.003004-2) ... Setting up po-debconf (1.0.21) ... Setting up gnupg (2.2.12-1+deb10u1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up liblwp-protocol-https-perl (6.07-2) ... Setting up libwww-perl (6.36-2) ... Setting up debhelper (12.1.1) ... Setting up devscripts (2.19.5+deb10u1) ... Setting up dh-buildinfo (0.11+nmu2) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for ca-certificates (20190110) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libcache-memcached-fast-perl-0.25/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libcache-memcached-fast-perl dpkg-buildpackage: info: source version 0.25-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Damyan Ivanov dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean CDBS WARNING: copyright-check disabled - licensecheck is missing. test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong" -k clean make[1]: Entering directory '/build/libcache-memcached-fast-perl-0.25' make[1]: *** No rule to make target 'clean'. make[1]: Leaving directory '/build/libcache-memcached-fast-perl-0.25' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-check rm -f debian/copyright_newhints rm -f debian/cdbs-install-list debian/cdbs-package-list debian/stamp-copyright-check rm -rf "debian/upstream-cruft" rm -f debian/stamp-upstream-cruft dh_clean rm -f Makefile.old src/Makefile.old debian/rules build CDBS WARNING: copyright-check disabled - licensecheck is missing. test -x debian/rules mkdir -p "." Scanning upstream source for new/changed copyright notices... set -e; LC_ALL=C.UTF-8 /usr/bin/licensecheck --check '.*' --recursive --copyright --deb-fmt --ignore '^(debian/(changelog|copyright(|_hints|_newhints)))$' --lines 0 -- * | /usr/lib/cdbs/licensecheck2dep5 > debian/copyright_newhints /bin/sh: 1: /usr/bin/licensecheck: not found 0 combinations of copyright and licensing found. WARNING: New or changed notices discovered: Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ To fix the situation please do the following: 1) Examine debian/copyright_* and referenced files 2) Update debian/copyright as needed 3) Replace debian/copyright_hints with debian/copyright_newhints touch debian/stamp-copyright-check touch debian/stamp-upstream-cruft cd . && /usr/bin/perl -I. Makefile.PL NOECHO= INSTALLDIRS=vendor Checking if your kit is complete... Looks good Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Cache::Memcached::Fast Writing MYMETA.yml and MYMETA.json /usr/bin/make -C . OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong" all make[1]: Entering directory '/build/libcache-memcached-fast-perl-0.25' "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/Cache/Memcached chmod 755 blib/lib/Cache/Memcached touch blib/lib/Cache/Memcached/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch chmod 755 blib/arch touch blib/arch/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/auto/Cache/Memcached/Fast chmod 755 blib/lib/auto/Cache/Memcached/Fast touch blib/lib/auto/Cache/Memcached/Fast/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch/auto/Cache/Memcached/Fast chmod 755 blib/arch/auto/Cache/Memcached/Fast touch blib/arch/auto/Cache/Memcached/Fast/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/bin chmod 755 blib/bin touch blib/bin/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/script chmod 755 blib/script touch blib/script/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man1 chmod 755 blib/man1 touch blib/man1/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man3 chmod 755 blib/man3 touch blib/man3/.exists true true true "/usr/bin/perl" -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''blib/lib/auto'\'', q[], '\''755'\'')' -- \ 'lib/Cache/Memcached/Fast.pm' 'blib/lib/Cache/Memcached/Fast.pm' cp lib/Cache/Memcached/Fast.pm blib/lib/Cache/Memcached/Fast.pm touch pm_to_blib cd src && make LIBPERL_A="libperl.a" LINKTYPE="dynamic" OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LD="arm-linux-gnueabihf-gcc" PREFIX="/usr" PASTHRU_DEFINE=' ' PASTHRU_INC=' ' make[2]: Entering directory '/build/libcache-memcached-fast-perl-0.25/src' "/usr/bin/perl" genparser.pl reply.kw parse_keyword.c parse_keyword.h arm-linux-gnueabihf-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -DVERSION=\"0.25\" -DXS_VERSION=\"0.25\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -DHAVE_POLL_H parse_keyword.c "/usr/bin/perl" gencrc32.pl compute_crc32.c compute_crc32.h arm-linux-gnueabihf-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -DVERSION=\"0.25\" -DXS_VERSION=\"0.25\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -DHAVE_POLL_H compute_crc32.c arm-linux-gnueabihf-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -DVERSION=\"0.25\" -DXS_VERSION=\"0.25\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -DHAVE_POLL_H array.c arm-linux-gnueabihf-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -DVERSION=\"0.25\" -DXS_VERSION=\"0.25\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -DHAVE_POLL_H client.c arm-linux-gnueabihf-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -DVERSION=\"0.25\" -DXS_VERSION=\"0.25\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -DHAVE_POLL_H connect.c arm-linux-gnueabihf-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -DVERSION=\"0.25\" -DXS_VERSION=\"0.25\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -DHAVE_POLL_H dispatch_key.c arm-linux-gnueabihf-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -DVERSION=\"0.25\" -DXS_VERSION=\"0.25\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -DHAVE_POLL_H socket_posix.c ar cr libclient.a parse_keyword.o compute_crc32.o array.o client.o connect.o dispatch_key.o socket_posix.o : libclient.a make[2]: Leaving directory '/build/libcache-memcached-fast-perl-0.25/src' true cd src && make -f Makefile all LIBPERL_A="libperl.a" LINKTYPE="dynamic" OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LD="arm-linux-gnueabihf-gcc" PREFIX="/usr" PASTHRU_DEFINE=' ' PASTHRU_INC=' ' make[2]: Entering directory '/build/libcache-memcached-fast-perl-0.25/src' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/libcache-memcached-fast-perl-0.25/src' echo "Running Mkbootstrap for Fast ()" Running Mkbootstrap for Fast () "/usr/bin/perl" \ "-MExtUtils::Mkbootstrap" \ -e "Mkbootstrap('Fast','');" touch "Fast.bs" chmod 644 "Fast.bs" rm -rf blib/arch/auto/Cache/Memcached/Fast/Fast.bs "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Fast.bs blib/arch/auto/Cache/Memcached/Fast/Fast.bs 644 "/usr/bin/perl" "/usr/share/perl/5.28/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' -typemap '/build/libcache-memcached-fast-perl-0.25/typemap' Fast.xs > Fast.xsc mv Fast.xsc Fast.c arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -DVERSION=\"0.25\" -DXS_VERSION=\"0.25\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" Fast.c rm -f blib/arch/auto/Cache/Memcached/Fast/Fast.so arm-linux-gnueabihf-gcc -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Fast.o -o blib/arch/auto/Cache/Memcached/Fast/Fast.so src/libclient.a \ \ chmod 755 blib/arch/auto/Cache/Memcached/Fast/Fast.so true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/Cache/Memcached/Fast.pm blib/man3/Cache::Memcached::Fast.3pm Manifying 1 pod document true make[1]: Leaving directory '/build/libcache-memcached-fast-perl-0.25' touch debian/stamp-makefile-build /usr/bin/make -C . OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1 make[1]: Entering directory '/build/libcache-memcached-fast-perl-0.25' true true true rm -rf blib/arch/auto/Cache/Memcached/Fast/Fast.bs "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Fast.bs blib/arch/auto/Cache/Memcached/Fast/Fast.bs 644 true true true cd src && make -f Makefile all LIBPERL_A="libperl.a" LINKTYPE="dynamic" OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LD="arm-linux-gnueabihf-gcc" PREFIX="/usr" PASTHRU_DEFINE=' ' PASTHRU_INC=' ' make[2]: Entering directory '/build/libcache-memcached-fast-perl-0.25/src' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/libcache-memcached-fast-perl-0.25/src' true true true cd src && make test_dynamic LIBPERL_A="libperl.a" LINKTYPE="dynamic" OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LD="arm-linux-gnueabihf-gcc" PREFIX="/usr" PASTHRU_DEFINE=' ' PASTHRU_INC=' ' make[2]: Entering directory '/build/libcache-memcached-fast-perl-0.25/src' No tests defined for Cache::Memcached::Fast::libclient extension. make[2]: Leaving directory '/build/libcache-memcached-fast-perl-0.25/src' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Cache::Memcached::Fast 0.25, Perl 5.028001, /usr/bin/perl t/00-load.t ......... 1..1 ok 1 - use Cache::Memcached::Fast; ok t/01-connect.t ...... skipped: No server is running at localhost:11211, 127.0.0.1:11211 t/02-isa.t .......... skipped: Not connected t/big_value.t ....... skipped: Not connected t/commands.t ........ skipped: Not connected t/errors.t .......... 1..4 ok 1 - server_versions() still returns a HASH ok 2 - No versions found ok 3 - add() ok 4 - get() ok t/hash_namespace.t .. skipped: Not connected t/key_ref.t ......... skipped: Not connected t/magic.t ........... skipped: Not connected t/malformed.t ....... skipped: Not connected t/namespace.t ....... skipped: Not connected t/noreply.t ......... skipped: Not connected t/nowait.t .......... skipped: Not connected t/pod-coverage.t .... skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/pod.t ............. skipped: Test::Pod 1.22 required for testing POD t/serialize.t ....... skipped: Not connected t/threads.t ......... skipped: Not connected t/utf8-downgrade.t .. skipped: Not connected t/utf8.t ............ skipped: Not connected All tests successful. Files=19, Tests=5, 5 wallclock secs ( 0.11 usr 0.05 sys + 4.56 cusr 0.35 csys = 5.07 CPU) Result: PASS true make[1]: Leaving directory '/build/libcache-memcached-fast-perl-0.25' touch debian/stamp-makefile-check fakeroot debian/rules binary CDBS WARNING: copyright-check disabled - licensecheck is missing. test -x debian/rules dh_testroot dh_prep dh_installdirs -A mkdir -p "." /usr/bin/make -C . OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl" make[1]: Entering directory '/build/libcache-memcached-fast-perl-0.25' true true true true cd src && make -f Makefile all LIBPERL_A="libperl.a" LINKTYPE="dynamic" OPTIMIZE="-g -O2 -ffile-prefix-map=/build/libcache-memcached-fast-perl-0.25=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LD="arm-linux-gnueabihf-gcc" PREFIX="/usr" PASTHRU_DEFINE=' ' PASTHRU_INC=' ' make[2]: Entering directory '/build/libcache-memcached-fast-perl-0.25/src' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/libcache-memcached-fast-perl-0.25/src' rm -rf blib/arch/auto/Cache/Memcached/Fast/Fast.bs "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Fast.bs blib/arch/auto/Cache/Memcached/Fast/Fast.bs 644 true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ lib/Cache/Memcached/Fast.pm blib/man3/Cache::Memcached::Fast.3pm Manifying 1 pod document true umask 022; "/usr/bin/perl" -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''0'\'', uninstall_shadows => '\''0'\'', dir_mode => '\''755'\'' ]);' -- \ "blib/lib" "/build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl/usr/share/perl5" \ "blib/arch" "/build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28" \ "blib/bin" "/build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl/usr/bin" \ "blib/script" "/build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl/usr/bin" \ "blib/man1" "/build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl/usr/share/man/man1" \ "blib/man3" "/build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl/usr/share/man/man3" Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Cache/Memcached/Fast/Fast.so Installing /build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Cache/Memcached/Fast.pm Installing /build/libcache-memcached-fast-perl-0.25/debian/libcache-memcached-fast-perl/usr/share/man/man3/Cache::Memcached::Fast.3pm true true true make[1]: Leaving directory '/build/libcache-memcached-fast-perl-0.25' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libcache-memcached-fast-perl.substvars dh_installdirs -plibcache-memcached-fast-perl \ dh_installdocs -plibcache-memcached-fast-perl ./README dh_installexamples -plibcache-memcached-fast-perl script/* dh_installman -plibcache-memcached-fast-perl dh_installinfo -plibcache-memcached-fast-perl dh_installmenu -plibcache-memcached-fast-perl dh_installcron -plibcache-memcached-fast-perl dh_systemd_enable -plibcache-memcached-fast-perl dh_installinit -plibcache-memcached-fast-perl dh_installdebconf -plibcache-memcached-fast-perl dh_installemacsen -plibcache-memcached-fast-perl dh_installcatalogs -plibcache-memcached-fast-perl dh_installpam -plibcache-memcached-fast-perl dh_installlogrotate -plibcache-memcached-fast-perl dh_installlogcheck -plibcache-memcached-fast-perl dh_installchangelogs -plibcache-memcached-fast-perl ./Changes dh_installudev -plibcache-memcached-fast-perl dh_lintian -plibcache-memcached-fast-perl dh_bugfiles -plibcache-memcached-fast-perl dh_install -plibcache-memcached-fast-perl dh_systemd_start -plibcache-memcached-fast-perl dh_link -plibcache-memcached-fast-perl dh_buildinfo -plibcache-memcached-fast-perl dh_installmime -plibcache-memcached-fast-perl dh_installgsettings -plibcache-memcached-fast-perl dh_strip -plibcache-memcached-fast-perl dh_strip_nondeterminism -plibcache-memcached-fast-perl dh_compress -plibcache-memcached-fast-perl dh_fixperms -plibcache-memcached-fast-perl dh_makeshlibs -plibcache-memcached-fast-perl dh_installdeb -plibcache-memcached-fast-perl dh_perl -plibcache-memcached-fast-perl dh_shlibdeps -plibcache-memcached-fast-perl dh_gencontrol -plibcache-memcached-fast-perl dh_md5sums -plibcache-memcached-fast-perl dh_builddeb -plibcache-memcached-fast-perl dpkg-deb: building package 'libcache-memcached-fast-perl' in '../libcache-memcached-fast-perl_0.25-1_armhf.deb'. dpkg-deb: building package 'libcache-memcached-fast-perl-dbgsym' in '../libcache-memcached-fast-perl-dbgsym_0.25-1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libcache-memcached-fast-perl_0.25-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/5069 and its subdirectories I: Current time: Wed May 20 22:01:40 -12 2020 I: pbuilder-time-stamp: 1590055300