I: pbuilder: network access will be disabled during build I: Current time: Sat May 23 14:59:01 -12 2020 I: pbuilder-time-stamp: 1590289141 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [keras-applications_1.0.6-1.dsc] I: copying [./keras-applications_1.0.6.orig.tar.gz] I: copying [./keras-applications_1.0.6-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Wed Jan 16 10:46:27 2019 -12 gpgv: using RSA key 46CB1CA89EA3B74376761DB915E09AF4DF5182C8 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./keras-applications_1.0.6-1.dsc dpkg-source: info: extracting keras-applications in keras-applications-1.0.6 dpkg-source: info: unpacking keras-applications_1.0.6.orig.tar.gz dpkg-source: info: unpacking keras-applications_1.0.6-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 11), dh-python, python3-all, python3-setuptools, python3-distutils dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 11); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. pbuilder-satisfydepends-dummy depends on python3-distutils; however: Package python3-distutils is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libmpdec2{a} libncurses6{a} libpipeline1{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libsigsegv2{a} libssl1.1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} mime-support{a} po-debconf{a} python3{a} python3-all{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3-pkg-resources{a} python3-setuptools{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 52 newly installed, 0 to remove and 0 not upgraded. Need to get 24.8 MB of archives. After unpacking 89.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libpython3.7-minimal armhf 3.7.3-2+deb10u1 [582 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libexpat1 armhf 2.2.6-2+deb10u1 [78.0 kB] Get: 10 http://deb.debian.org/debian buster/main armhf python3.7-minimal armhf 3.7.3-2+deb10u1 [1465 kB] Get: 11 http://deb.debian.org/debian buster/main armhf python3-minimal armhf 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main armhf mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libmpdec2 armhf 2.4.2-2 [69.3 kB] Get: 14 http://deb.debian.org/debian buster/main armhf readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main armhf libreadline7 armhf 7.0-5 [131 kB] Get: 16 http://deb.debian.org/debian buster/main armhf libpython3.7-stdlib armhf 3.7.3-2+deb10u1 [1660 kB] Get: 17 http://deb.debian.org/debian buster/main armhf python3.7 armhf 3.7.3-2+deb10u1 [330 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libpython3-stdlib armhf 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main armhf python3 armhf 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 23 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 24 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 26 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 27 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 28 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 29 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 30 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 31 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 32 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 33 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 35 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 37 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 43 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 44 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 45 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 46 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 47 http://deb.debian.org/debian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB] Get: 48 http://deb.debian.org/debian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Get: 49 http://deb.debian.org/debian buster/main armhf dh-python all 3.20190308 [99.3 kB] Get: 50 http://deb.debian.org/debian buster/main armhf python3-all armhf 3.7.3-1 [1068 B] Get: 51 http://deb.debian.org/debian buster/main armhf python3-pkg-resources all 40.8.0-1 [153 kB] Get: 52 http://deb.debian.org/debian buster/main armhf python3-setuptools all 40.8.0-1 [306 kB] Fetched 24.8 MB in 3s (7675 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../2-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../4-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u1) ... Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Setting up libexpat1:armhf (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_armhf.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../2-libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../4-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20288 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.3-1_armhf.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../03-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../06-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../07-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../08-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../09-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../10-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../11-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../12-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../13-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../14-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../15-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../16-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../17-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../18-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../19-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../20-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../21-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../22-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../23-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../24-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../25-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../26-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../27-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../28-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../29-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../30-dh-python_3.20190308_all.deb ... Unpacking dh-python (3.20190308) ... Selecting previously unselected package python3-all. Preparing to unpack .../31-python3-all_3.7.3-1_armhf.deb ... Unpacking python3-all (3.7.3-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../32-python3-pkg-resources_40.8.0-1_all.deb ... Unpacking python3-pkg-resources (40.8.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../33-python3-setuptools_40.8.0-1_all.deb ... Unpacking python3-setuptools (40.8.0-1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up mime-support (3.62) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libreadline7:armhf (7.0-5) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libpython3-stdlib:armhf (3.7.3-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u1) ... Setting up gettext (0.19.8.1-9) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up python3-pkg-resources (40.8.0-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up dh-python (3.20190308) ... Setting up python3-setuptools (40.8.0-1) ... Setting up po-debconf (1.0.21) ... Setting up python3-all (3.7.3-1) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/keras-applications-1.0.6/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package keras-applications dpkg-buildpackage: info: source version 1.0.6-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Stephen Sinclair dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --with python3 --buildsystem=pybuild dh_auto_clean -O--buildsystem=pybuild pybuild --clean -i python{version} -p 3.7 I: pybuild base:217: python3.7 setup.py clean running clean removing '/build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build' (and everything under it) 'build/bdist.linux-armhf' does not exist -- can't clean it 'build/scripts-3.7' does not exist -- can't clean it rm -rf .pybuild/ find . -name \*.pyc -exec rm {} \; dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild rm -f debian/debhelper-build-stamp rm -rf debian/.debhelper/ rm -f -- debian/python3-keras-applications.substvars debian/files rm -fr -- debian/python3-keras-applications/ debian/tmp/ find . \( \( \ \( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path .\*/.hg -o -path .\*/CVS -o -path .\*/.pc -o -path .\*/_darcs \) -prune -o -type f -a \ \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \ -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \ -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \ -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \ \) -exec rm -f {} + \) -o \ \( -type d -a -name autom4te.cache -prune -exec rm -rf {} + \) \) debian/rules build dh build --with python3 --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild pybuild --configure -i python{version} -p 3.7 I: pybuild base:217: python3.7 setup.py config running config dh_auto_build -O--buildsystem=pybuild pybuild --build -i python{version} -p 3.7 I: pybuild base:217: /usr/bin/python3 setup.py build running build running build_py creating /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/resnet50.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/inception_v3.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/densenet.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/mobilenet_v2.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/vgg16.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/vgg19.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/imagenet_utils.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/inception_resnet_v2.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/nasnet.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/mobilenet.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/xception.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications copying keras_applications/__init__.py -> /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications warning: build_py: byte-compiling is disabled, skipping. dh_auto_test -O--buildsystem=pybuild pybuild --test -i python{version} -p 3.7 I: pybuild base:217: cd /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build; python3.7 -m unittest discover -v ---------------------------------------------------------------------- Ran 0 tests in 0.000s OK create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary --with python3 --buildsystem=pybuild dh_testroot -O--buildsystem=pybuild dh_prep -O--buildsystem=pybuild rm -f -- debian/python3-keras-applications.substvars rm -fr -- debian/.debhelper/generated/python3-keras-applications/ debian/python3-keras-applications/ debian/tmp/ dh_auto_install -O--buildsystem=pybuild install -d /build/keras-applications-1.0.6/debian/python3-keras-applications pybuild --install -i python{version} -p 3.7 --dest-dir /build/keras-applications-1.0.6/debian/python3-keras-applications I: pybuild base:217: /usr/bin/python3 setup.py install --root /build/keras-applications-1.0.6/debian/python3-keras-applications running install running build running build_py warning: build_py: byte-compiling is disabled, skipping. running install_lib creating /build/keras-applications-1.0.6/debian/python3-keras-applications/usr creating /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib creating /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7 creating /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages creating /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/resnet50.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/inception_v3.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/densenet.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/mobilenet_v2.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/vgg16.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/vgg19.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/imagenet_utils.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/inception_resnet_v2.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/nasnet.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/mobilenet.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/xception.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications copying /build/keras-applications-1.0.6/.pybuild/cpython3_3.7_keras_applications/build/keras_applications/__init__.py -> /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/keras_applications warning: install_lib: byte-compiling is disabled, skipping. running install_egg_info running egg_info creating Keras_Applications.egg-info writing Keras_Applications.egg-info/PKG-INFO writing dependency_links to Keras_Applications.egg-info/dependency_links.txt writing requirements to Keras_Applications.egg-info/requires.txt writing top-level names to Keras_Applications.egg-info/top_level.txt writing manifest file 'Keras_Applications.egg-info/SOURCES.txt' reading manifest file 'Keras_Applications.egg-info/SOURCES.txt' writing manifest file 'Keras_Applications.egg-info/SOURCES.txt' Copying Keras_Applications.egg-info to /build/keras-applications-1.0.6/debian/python3-keras-applications/usr/lib/python3.7/dist-packages/Keras_Applications-1.0.6.egg-info Skipping SOURCES.txt running install_scripts dh_installdocs -O--buildsystem=pybuild install -d debian/python3-keras-applications/usr/share/doc/python3-keras-applications install -d debian/.debhelper/generated/python3-keras-applications install -p -m0644 debian/copyright debian/python3-keras-applications/usr/share/doc/python3-keras-applications/copyright dh_installchangelogs -O--buildsystem=pybuild install -p -m0644 debian/changelog debian/python3-keras-applications/usr/share/doc/python3-keras-applications/changelog.Debian dh_python3 -O--buildsystem=pybuild D: dh_python3 dh_python3:161: version: 3.20190308 D: dh_python3 dh_python3:162: argv: ['/usr/bin/dh_python3', '-O--buildsystem=pybuild'] D: dh_python3 dh_python3:163: options: {'guess_deps': True, 'skip_private': False, 'verbose': False, 'arch': None, 'package': None, 'no_package': None, 'compile_all': False, 'vrange': None, 'regexpr': None, 'accept_upstream_versions': False, 'depends': None, 'depends_section': None, 'recommends': None, 'recommends_section': None, 'suggests': None, 'suggests_section': None, 'requires': None, 'shebang': None, 'ignore_shebangs': False, 'clean_dbg_pkg': True, 'no_ext_rename': False, 'no_shebang_rewrite': False, 'O': '--buildsystem=pybuild'} D: dh_python3 dh_python3:164: args: [] D: dh_python3 dh_python3:166: supported Python versions: 3.7 (default=3.7) D: dh_python3 debhelper:153: source=keras-applications, binary packages=['python3-keras-applications'] D: dh_python3 dh_python3:183: processing package python3-keras-applications... D: dh_python3 fs:49: moving files from debian/python3-keras-applications/usr/lib/python3.7/dist-packages to debian/python3-keras-applications/usr/lib/python3/dist-packages/ D: dh_python3 tools:232: invoking: /usr/bin/python3.7 -c 'import sysconfig as s;print("__SEP__".join(i or "" for i in s.get_config_vars("SOABI", "MULTIARCH", "INCLUDEPY", "LIBPL", "LDLIBRARY")))' D: dh_python3 fs:260: package python3-keras-applications details = {'requires.txt': {'debian/python3-keras-applications/usr/lib/python3/dist-packages/Keras_Applications-1.0.6.egg-info/requires.txt'}, 'egg-info': set(), 'nsp.txt': set(), 'shebangs': set(), 'public_vers': {Version('3')}, 'private_dirs': {}, 'compile': True, 'ext_vers': set(), 'ext_no_version': set()} D: dh_python3 depends:114: generating dependencies for package python3-keras-applications D: dh_python3 pydist:138: trying to find dependency for h5py (python=None) D: dh_python3 pydist:138: trying to find dependency for numpy>=1.9.1 (python=None) D: dh_python3 depends:272: D={'python3:any (>= 3.6~)', 'python3-h5py', 'python3:any', 'python3-numpy'}; R=[]; S=[]; E=[], B=[]; RT=[] dh_installinit -O--buildsystem=pybuild dh_perl -O--buildsystem=pybuild dh_link -O--buildsystem=pybuild dh_strip_nondeterminism -O--buildsystem=pybuild debian/rules override_dh_compress make[1]: Entering directory '/build/keras-applications-1.0.6' dh_compress -X.py cd debian/python3-keras-applications chmod a-x usr/share/doc/python3-keras-applications/changelog.Debian gzip -9nf usr/share/doc/python3-keras-applications/changelog.Debian cd '/build/keras-applications-1.0.6' make[1]: Leaving directory '/build/keras-applications-1.0.6' dh_fixperms -O--buildsystem=pybuild find debian/python3-keras-applications -true -print0 2>/dev/null | xargs -0r chown --no-dereference 0:0 find debian/python3-keras-applications ! -type l -a -true -a -true -print0 2>/dev/null | xargs -0r chmod go=rX,u+rw,a-s find debian/python3-keras-applications/usr/share/doc -type f -a -true -a ! -regex 'debian/python3-keras-applications/usr/share/doc/[^/]*/examples/.*' -print0 2>/dev/null | xargs -0r chmod 0644 find debian/python3-keras-applications/usr/share/doc -type d -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0755 find debian/python3-keras-applications -type f \( -name '*.so.*' -o -name '*.so' -o -name '*.la' -o -name '*.a' -o -name '*.js' -o -name '*.css' -o -name '*.scss' -o -name '*.sass' -o -name '*.jpeg' -o -name '*.jpg' -o -name '*.png' -o -name '*.gif' -o -name '*.cmxs' -o -name '*.node' \) -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0644 find debian/python3-keras-applications/usr/lib -type f -name '*.ali' -a -true -a -true -print0 2>/dev/null | xargs -0r chmod uga-w dh_missing -O--buildsystem=pybuild dh_installdeb -O--buildsystem=pybuild install -d debian/python3-keras-applications/DEBIAN printf '#!/bin/sh\nset -e\n' > debian/python3-keras-applications/DEBIAN/postinst cat debian/python3-keras-applications.postinst.debhelper >> debian/python3-keras-applications/DEBIAN/postinst chmod 0755 -- debian/python3-keras-applications/DEBIAN/postinst chown 0:0 -- debian/python3-keras-applications/DEBIAN/postinst printf '#!/bin/sh\nset -e\n' > debian/python3-keras-applications/DEBIAN/prerm cat debian/python3-keras-applications.prerm.debhelper >> debian/python3-keras-applications/DEBIAN/prerm chmod 0755 -- debian/python3-keras-applications/DEBIAN/prerm chown 0:0 -- debian/python3-keras-applications/DEBIAN/prerm dh_gencontrol -O--buildsystem=pybuild echo misc:Depends= >> debian/python3-keras-applications.substvars echo misc:Pre-Depends= >> debian/python3-keras-applications.substvars dpkg-gencontrol -ppython3-keras-applications -ldebian/changelog -Tdebian/python3-keras-applications.substvars -Pdebian/python3-keras-applications -UMulti-Arch chmod 0644 -- debian/python3-keras-applications/DEBIAN/control chown 0:0 -- debian/python3-keras-applications/DEBIAN/control dh_md5sums -O--buildsystem=pybuild cd debian/python3-keras-applications >/dev/null && xargs -r0 md5sum | perl -pe 'if (s@^\\@@) { s/\\\\/\\/g; }' > DEBIAN/md5sums chmod 0644 -- debian/python3-keras-applications/DEBIAN/md5sums chown 0:0 -- debian/python3-keras-applications/DEBIAN/md5sums dh_builddeb -O--buildsystem=pybuild dpkg-deb --build debian/python3-keras-applications .. dpkg-deb: building package 'python3-keras-applications' in '../python3-keras-applications_1.0.6-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../keras-applications_1.0.6-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/17118 and its subdirectories I: Current time: Sat May 23 15:00:19 -12 2020 I: pbuilder-time-stamp: 1590289219