I: pbuilder: network access will be disabled during build I: Current time: Thu May 28 03:58:50 -12 2020 I: pbuilder-time-stamp: 1590681530 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [admesh_0.98.3-3.dsc] I: copying [./admesh_0.98.3.orig.tar.gz] I: copying [./admesh_0.98.3-3.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Fri Sep 28 04:29:43 2018 -12 gpgv: using RSA key BBBD45EA818AB86FF67E7285D3E17383CFA7FF06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./admesh_0.98.3-3.dsc dpkg-source: info: extracting admesh in admesh-0.98.3 dpkg-source: info: unpacking admesh_0.98.3.orig.tar.gz dpkg-source: info: unpacking admesh_0.98.3-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 64e86ea3107c757090f2a7045a1a6a1982a4ba08.patch I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10), dh-autoreconf dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 18.2 MB of archives. After unpacking 63.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Fetched 18.2 MB in 2s (8365 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/admesh-0.98.3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package admesh dpkg-buildpackage: info: source version 0.98.3-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Anton Gladky dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --with autoreconf dh_clean debian/rules build dh build --with autoreconf dh_update_autotools_config dh_autoreconf aclocal: warning: couldn't open directory 'm4': No such file or directory libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:22: installing './compile' configure.ac:22: installing './config.guess' configure.ac:22: installing './config.sub' configure.ac:20: installing './install-sh' configure.ac:20: installing './missing' Makefile.am: installing './depcomp' dh_auto_configure ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking how to print strings... printf checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) none checking for a sed that does not truncate output... (cached) /bin/sed checking for main in -lm... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating libadmesh.pc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-maintainer-mode configure: ============================================================================== Build configuration: werror: no ============================================================================== dh_auto_build make -j3 make[1]: Entering directory '/build/admesh-0.98.3' make all-am make[2]: Entering directory '/build/admesh-0.98.3' git log --format='%aN <%aE>' | sort -u > AUTHORS /bin/bash: git: command not found ./fortag.sh >ChangeLog gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c -o src/admesh.o src/admesh.c ./fortag.sh: line 4: git: command not found /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c -o src/connect.lo src/connect.c /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c -o src/normals.lo src/normals.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c src/connect.c -fPIC -DPIC -o src/.libs/connect.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c src/normals.c -fPIC -DPIC -o src/.libs/normals.o /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c -o src/shared.lo src/shared.c /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c -o src/stlinit.lo src/stlinit.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c src/shared.c -fPIC -DPIC -o src/.libs/shared.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c src/stlinit.c -fPIC -DPIC -o src/.libs/stlinit.o /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c -o src/stl_io.lo src/stl_io.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c src/stl_io.c -fPIC -DPIC -o src/.libs/stl_io.o /bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c -o src/util.lo src/util.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -c src/util.c -fPIC -DPIC -o src/.libs/util.o /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wl,--gc-sections -Wl,--as-needed -no-undefined -version-info 1:0:0 -Wl,-z,relro -Wl,-z,now -o libadmesh.la -rpath /usr/lib/arm-linux-gnueabihf src/connect.lo src/normals.lo src/shared.lo src/stlinit.lo src/stl_io.lo src/util.lo -lm libtool: link: gcc -shared -fPIC -DPIC src/.libs/connect.o src/.libs/normals.o src/.libs/shared.o src/.libs/stlinit.o src/.libs/stl_io.o src/.libs/util.o -lm -g -O2 -fstack-protector-strong -Wl,--gc-sections -Wl,--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-soname -Wl,libadmesh.so.1 -o .libs/libadmesh.so.1.0.0 libtool: link: (cd ".libs" && rm -f "libadmesh.so.1" && ln -s "libadmesh.so.1.0.0" "libadmesh.so.1") libtool: link: (cd ".libs" && rm -f "libadmesh.so" && ln -s "libadmesh.so.1.0.0" "libadmesh.so") libtool: link: ( cd ".libs" && rm -f "libadmesh.la" && ln -s "../libadmesh.la" "libadmesh.la" ) /bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wl,--gc-sections -Wl,--as-needed -no-undefined -Wl,-z,relro -Wl,-z,now -o admesh src/admesh.o libadmesh.la -lm libtool: link: gcc -g -O2 -ffile-prefix-map=/build/admesh-0.98.3=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wextra -pedantic -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wl,--gc-sections -Wl,--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -o .libs/admesh src/admesh.o ./.libs/libadmesh.so -lm make[2]: Leaving directory '/build/admesh-0.98.3' make[1]: Leaving directory '/build/admesh-0.98.3' debian/rules override_dh_auto_test make[1]: Entering directory '/build/admesh-0.98.3' ./debian/regression_test/regression_test Regression test PASSED! make[1]: Leaving directory '/build/admesh-0.98.3' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary --with autoreconf dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/admesh-0.98.3/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/admesh-0.98.3' make[2]: Entering directory '/build/admesh-0.98.3' /bin/mkdir -p '/build/admesh-0.98.3/debian/tmp/usr/lib/arm-linux-gnueabihf' /bin/bash ./libtool --mode=install /usr/bin/install -c libadmesh.la '/build/admesh-0.98.3/debian/tmp/usr/lib/arm-linux-gnueabihf' libtool: install: /usr/bin/install -c .libs/libadmesh.so.1.0.0 /build/admesh-0.98.3/debian/tmp/usr/lib/arm-linux-gnueabihf/libadmesh.so.1.0.0 libtool: install: (cd /build/admesh-0.98.3/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libadmesh.so.1.0.0 libadmesh.so.1 || { rm -f libadmesh.so.1 && ln -s libadmesh.so.1.0.0 libadmesh.so.1; }; }) libtool: install: (cd /build/admesh-0.98.3/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libadmesh.so.1.0.0 libadmesh.so || { rm -f libadmesh.so && ln -s libadmesh.so.1.0.0 libadmesh.so; }; }) libtool: install: /usr/bin/install -c .libs/libadmesh.lai /build/admesh-0.98.3/debian/tmp/usr/lib/arm-linux-gnueabihf/libadmesh.la libtool: warning: remember to run 'libtool --finish /usr/lib/arm-linux-gnueabihf' /bin/mkdir -p '/build/admesh-0.98.3/debian/tmp/usr/bin' /bin/bash ./libtool --mode=install /usr/bin/install -c admesh '/build/admesh-0.98.3/debian/tmp/usr/bin' libtool: warning: 'libadmesh.la' has not been installed in '/usr/lib/arm-linux-gnueabihf' libtool: install: /usr/bin/install -c .libs/admesh /build/admesh-0.98.3/debian/tmp/usr/bin/admesh /bin/mkdir -p '/build/admesh-0.98.3/debian/tmp/usr/share/doc/admesh' /usr/bin/install -c -m 644 admesh-doc.txt README.md COPYING AUTHORS ChangeLog ChangeLog.old '/build/admesh-0.98.3/debian/tmp/usr/share/doc/admesh' /bin/mkdir -p '/build/admesh-0.98.3/debian/tmp/usr/share/man/man1' /usr/bin/install -c -m 644 admesh.1 '/build/admesh-0.98.3/debian/tmp/usr/share/man/man1' /bin/mkdir -p '/build/admesh-0.98.3/debian/tmp/usr/lib/arm-linux-gnueabihf/pkgconfig' /usr/bin/install -c -m 644 libadmesh.pc '/build/admesh-0.98.3/debian/tmp/usr/lib/arm-linux-gnueabihf/pkgconfig' /bin/mkdir -p '/build/admesh-0.98.3/debian/tmp/usr/include/admesh' /usr/bin/install -c -m 644 src/stl.h '/build/admesh-0.98.3/debian/tmp/usr/include/admesh' make[2]: Leaving directory '/build/admesh-0.98.3' make[1]: Leaving directory '/build/admesh-0.98.3' dh_install dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dpkg-gencontrol: warning: Depends field of package libadmesh-dev: substitution variable ${shlibs:Depends} used, but is not defined dh_md5sums dh_builddeb dpkg-deb: building package 'libadmesh-dev' in '../libadmesh-dev_0.98.3-3_armhf.deb'. dpkg-deb: building package 'admesh' in '../admesh_0.98.3-3_armhf.deb'. dpkg-deb: building package 'libadmesh1-dbgsym' in '../libadmesh1-dbgsym_0.98.3-3_armhf.deb'. dpkg-deb: building package 'libadmesh1' in '../libadmesh1_0.98.3-3_armhf.deb'. dpkg-deb: building package 'admesh-dbgsym' in '../admesh-dbgsym_0.98.3-3_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../admesh_0.98.3-3_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/15639 and its subdirectories I: Current time: Thu May 28 04:00:13 -12 2020 I: pbuilder-time-stamp: 1590681613