I: pbuilder: network access will be disabled during build I: Current time: Mon Aug 15 12:06:33 +14 2022 I: pbuilder-time-stamp: 1660514793 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libcoro-perl_6.540-1.dsc] I: copying [./libcoro-perl_6.540.orig.tar.gz] I: copying [./libcoro-perl_6.540-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Mon Dec 17 19:57:05 2018 +14 gpgv: using RSA key 00DFE58B8B555779D1005EC9F6D74CA7C999EEE9 gpgv: issuer "yadd@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libcoro-perl_6.540-1.dsc dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.540 dpkg-source: info: unpacking libcoro-perl_6.540.orig.tar.gz dpkg-source: info: unpacking libcoro-perl_6.540-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix-wrong-path-for-interpreter.patch dpkg-source: info: applying whatis.patch dpkg-source: info: applying spelling.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/20339/tmp/hooks/D01_modify_environment starting debug: Running on ionos15-amd64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash Removing 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /bin/sh to /bin/sh.distrib by bash' Removing 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by bash' I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/20339/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/20339/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="0" [2]="3" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='5.0.3(1)-release' BUILDDIR=/build BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=amd64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=16' DIRSTACK=() DISTRIBUTION= EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=x86_64 HOST_ARCH=amd64 IFS=' ' INVOCATION_ID=0769eac4b949451ea7765ca10b4e732a LANG=C LANGUAGE=et_EE:et LC_ALL=C MACHTYPE=x86_64-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=20339 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.JCxECKdktU/pbuilderrc_GmYt --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.JCxECKdktU/b2 --logfile b2/build.log libcoro-perl_6.540-1.dsc' SUDO_GID=111 SUDO_UID=106 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://85.184.249.68:3128 I: uname -a Linux i-capture-the-hostname 5.10.0-0.bpo.7-amd64 #1 SMP Debian 5.10.40-1~bpo10+1 (2021-06-04) x86_64 GNU/Linux I: ls -l /bin total 5116 -rwxr-xr-x 1 root root 1168776 Apr 18 2019 bash -rwxr-xr-x 3 root root 38984 Jul 11 2019 bunzip2 -rwxr-xr-x 3 root root 38984 Jul 11 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 11 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 11 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 11 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 25 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 11 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 11 2019 bzgrep -rwxr-xr-x 3 root root 38984 Jul 11 2019 bzip2 -rwxr-xr-x 1 root root 14328 Jul 11 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 11 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 11 2019 bzmore -rwxr-xr-x 1 root root 43744 Mar 1 2019 cat -rwxr-xr-x 1 root root 64320 Mar 1 2019 chgrp -rwxr-xr-x 1 root root 64288 Mar 1 2019 chmod -rwxr-xr-x 1 root root 72512 Mar 1 2019 chown -rwxr-xr-x 1 root root 146880 Mar 1 2019 cp -rwxr-xr-x 1 root root 121464 Jan 18 2019 dash -rwxr-xr-x 1 root root 109408 Mar 1 2019 date -rwxr-xr-x 1 root root 76712 Mar 1 2019 dd -rwxr-xr-x 1 root root 93744 Mar 1 2019 df -rwxr-xr-x 1 root root 138856 Mar 1 2019 dir -rwxr-xr-x 1 root root 84288 Jan 10 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 27 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 27 2018 domainname -> hostname -rwxr-xr-x 1 root root 39520 Mar 1 2019 echo -rwxr-xr-x 1 root root 28 Jan 8 2019 egrep -rwxr-xr-x 1 root root 35424 Mar 1 2019 false -rwxr-xr-x 1 root root 28 Jan 8 2019 fgrep -rwxr-xr-x 1 root root 68880 Jan 10 2019 findmnt -rwsr-xr-x 1 root root 34896 Apr 23 2020 fusermount -rwxr-xr-x 1 root root 198976 Jan 8 2019 grep -rwxr-xr-x 2 root root 2345 Jan 6 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 6 2019 gzexe -rwxr-xr-x 1 root root 98048 Jan 6 2019 gzip -rwxr-xr-x 1 root root 26696 Sep 27 2018 hostname -rwxr-xr-x 1 root root 68552 Mar 1 2019 ln -rwxr-xr-x 1 root root 56760 Jul 27 2018 login -rwxr-xr-x 1 root root 138856 Mar 1 2019 ls -rwxr-xr-x 1 root root 108624 Jan 10 2019 lsblk -rwxr-xr-x 1 root root 89088 Mar 1 2019 mkdir -rwxr-xr-x 1 root root 68544 Mar 1 2019 mknod -rwxr-xr-x 1 root root 43808 Mar 1 2019 mktemp -rwxr-xr-x 1 root root 43008 Jan 10 2019 more -rwsr-xr-x 1 root root 51280 Jan 10 2019 mount -rwxr-xr-x 1 root root 14408 Jan 10 2019 mountpoint -rwxr-xr-x 1 root root 138728 Mar 1 2019 mv lrwxrwxrwx 1 root root 8 Sep 27 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 15 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 39616 Mar 1 2019 pwd lrwxrwxrwx 1 root root 4 Apr 18 2019 rbash -> bash -rwxr-xr-x 1 root root 47776 Mar 1 2019 readlink -rwxr-xr-x 1 root root 68416 Mar 1 2019 rm -rwxr-xr-x 1 root root 47776 Mar 1 2019 rmdir -rwxr-xr-x 1 root root 23312 Jan 22 2019 run-parts -rwxr-xr-x 1 root root 122224 Dec 23 2018 sed lrwxrwxrwx 1 root root 4 Aug 15 12:06 sh -> bash lrwxrwxrwx 1 root root 4 Aug 10 04:47 sh.distrib -> dash -rwxr-xr-x 1 root root 39552 Mar 1 2019 sleep -rwxr-xr-x 1 root root 80672 Mar 1 2019 stty -rwsr-xr-x 1 root root 63568 Jan 10 2019 su -rwxr-xr-x 1 root root 35488 Mar 1 2019 sync -rwxr-xr-x 1 root root 445560 Apr 24 2019 tar -rwxr-xr-x 1 root root 14440 Jan 22 2019 tempfile -rwxr-xr-x 1 root root 97152 Mar 1 2019 touch -rwxr-xr-x 1 root root 35424 Mar 1 2019 true -rwxr-xr-x 1 root root 14328 Apr 23 2020 ulockmgr_server -rwsr-xr-x 1 root root 34888 Jan 10 2019 umount -rwxr-xr-x 1 root root 39584 Mar 1 2019 uname -rwxr-xr-x 2 root root 2345 Jan 6 2019 uncompress -rwxr-xr-x 1 root root 138856 Mar 1 2019 vdir -rwxr-xr-x 1 root root 34896 Jan 10 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 22 2019 which lrwxrwxrwx 1 root root 8 Sep 27 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 6 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 6 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 6 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 6 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 6 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 6 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 6 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 6 2019 zless -rwxr-xr-x 1 root root 1841 Jan 6 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 6 2019 znew I: user script /srv/workspace/pbuilder/20339/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19195 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libanyevent-perl; however: Package libanyevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on libcommon-sense-perl; however: Package libcommon-sense-perl is not installed. pbuilder-satisfydepends-dummy depends on libev-perl; however: Package libev-perl is not installed. pbuilder-satisfydepends-dummy depends on libevent-perl; however: Package libevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libguard-perl; however: Package libguard-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libanyevent-perl{a} libarchive-zip-perl{a} libbsd0{a} libcanary-stability-perl{a} libcommon-sense-perl{a} libcroco3{a} libelf1{a} libev-perl{a} libevent-perl{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libguard-perl{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libasync-interrupt-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 20.0 MB of archives. After unpacking 71.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main amd64 libbsd0 amd64 0.9.1-2+deb10u1 [99.5 kB] Get: 2 http://deb.debian.org/debian buster/main amd64 bsdmainutils amd64 11.1.2+b1 [191 kB] Get: 3 http://deb.debian.org/debian buster/main amd64 libuchardet0 amd64 0.0.6-3 [64.9 kB] Get: 4 http://deb.debian.org/debian buster/main amd64 groff-base amd64 1.22.4-3+deb10u1 [916 kB] Get: 5 http://deb.debian.org/debian buster/main amd64 libpipeline1 amd64 1.5.1-2 [31.2 kB] Get: 6 http://deb.debian.org/debian buster/main amd64 man-db amd64 2.8.5-2 [1274 kB] Get: 7 http://deb.debian.org/debian buster/main amd64 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main amd64 libmagic-mgc amd64 1:5.35-4+deb10u2 [242 kB] Get: 9 http://deb.debian.org/debian buster/main amd64 libmagic1 amd64 1:5.35-4+deb10u2 [118 kB] Get: 10 http://deb.debian.org/debian buster/main amd64 file amd64 1:5.35-4+deb10u2 [66.4 kB] Get: 11 http://deb.debian.org/debian buster/main amd64 gettext-base amd64 0.19.8.1-9 [123 kB] Get: 12 http://deb.debian.org/debian buster/main amd64 libsigsegv2 amd64 2.12-2 [32.8 kB] Get: 13 http://deb.debian.org/debian buster/main amd64 m4 amd64 1.4.18-2 [203 kB] Get: 14 http://deb.debian.org/debian buster/main amd64 autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main amd64 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main amd64 automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main amd64 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main amd64 libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main amd64 dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main amd64 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main amd64 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main amd64 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main amd64 libelf1 amd64 0.176-1.1 [161 kB] Get: 24 http://deb.debian.org/debian buster/main amd64 dwz amd64 0.12-3 [78.0 kB] Get: 25 http://deb.debian.org/debian buster/main amd64 libglib2.0-0 amd64 2.58.3-2+deb10u3 [1259 kB] Get: 26 http://deb.debian.org/debian buster/main amd64 libicu63 amd64 63.1-6+deb10u1 [8300 kB] Get: 27 http://deb.debian.org/debian buster/main amd64 libxml2 amd64 2.9.4+dfsg1-7+deb10u2 [689 kB] Get: 28 http://deb.debian.org/debian buster/main amd64 libcroco3 amd64 0.6.12-3 [145 kB] Get: 29 http://deb.debian.org/debian buster/main amd64 libncurses6 amd64 6.1+20181013-2+deb10u2 [102 kB] Get: 30 http://deb.debian.org/debian buster/main amd64 gettext amd64 0.19.8.1-9 [1303 kB] Get: 31 http://deb.debian.org/debian buster/main amd64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main amd64 po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main amd64 debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main amd64 libanyevent-perl amd64 7.140-3 [393 kB] Get: 35 http://deb.debian.org/debian buster/main amd64 libcanary-stability-perl amd64 2006-2 [8796 B] Get: 36 http://deb.debian.org/debian buster/main amd64 libcommon-sense-perl amd64 3.74-2+b7 [24.0 kB] Get: 37 http://deb.debian.org/debian buster/main amd64 libev-perl amd64 4.25-1 [252 kB] Get: 38 http://deb.debian.org/debian buster/main amd64 libevent-perl amd64 1.27-1 [263 kB] Get: 39 http://deb.debian.org/debian buster/main amd64 libguard-perl amd64 1.023-1+b5 [15.9 kB] Fetched 20.0 MB in 0s (73.6 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19195 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2+deb10u1_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-2+deb10u1) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_amd64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../02-libuchardet0_0.0.6-3_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3+deb10u1_amd64.deb ... Unpacking groff-base (1.22.4-3+deb10u1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../04-libpipeline1_1.5.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u2_amd64.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u2) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u2_amd64.deb ... Unpacking libmagic1:amd64 (1:5.35-4+deb10u2) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u2_amd64.deb ... Unpacking file (1:5.35-4+deb10u2) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_amd64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../11-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_amd64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../22-libelf1_0.176-1.1_amd64.deb ... Unpacking libelf1:amd64 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_amd64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u3_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.3-2+deb10u3) ... Selecting previously unselected package libicu63:amd64. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_amd64.deb ... Unpacking libicu63:amd64 (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+deb10u2_amd64.deb ... Unpacking libxml2:amd64 (2.9.4+dfsg1-7+deb10u2) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../27-libcroco3_0.6.12-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-3) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_amd64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../33-libanyevent-perl_7.140-3_amd64.deb ... Unpacking libanyevent-perl (7.140-3) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../34-libcanary-stability-perl_2006-2_amd64.deb ... Unpacking libcanary-stability-perl (2006-2) ... Selecting previously unselected package libcommon-sense-perl. Preparing to unpack .../35-libcommon-sense-perl_3.74-2+b7_amd64.deb ... Unpacking libcommon-sense-perl (3.74-2+b7) ... Selecting previously unselected package libev-perl. Preparing to unpack .../36-libev-perl_4.25-1_amd64.deb ... Unpacking libev-perl (4.25-1) ... Selecting previously unselected package libevent-perl. Preparing to unpack .../37-libevent-perl_1.27-1_amd64.deb ... Unpacking libevent-perl (1.27-1) ... Selecting previously unselected package libguard-perl. Preparing to unpack .../38-libguard-perl_1.023-1+b5_amd64.deb ... Unpacking libguard-perl (1.023-1+b5) ... Setting up libanyevent-perl (7.140-3) ... Setting up libpipeline1:amd64 (1.5.1-2) ... Setting up libevent-perl (1.27-1) ... Setting up libmagic-mgc (1:5.35-4+deb10u2) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:amd64 (2.58.3-2+deb10u3) ... No schema files found: doing nothing. Setting up libmagic1:amd64 (1:5.35-4+deb10u2) ... Setting up libcommon-sense-perl (3.74-2+b7) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u2) ... Setting up libcanary-stability-perl (2006-2) ... Setting up libicu63:amd64 (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:amd64 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:amd64 (0.0.6-3) ... Setting up libbsd0:amd64 (0.9.1-2+deb10u1) ... Setting up libev-perl (4.25-1) ... Setting up libelf1:amd64 (0.176-1.1) ... Setting up libguard-perl (1.023-1+b5) ... Setting up libxml2:amd64 (2.9.4+dfsg1-7+deb10u2) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:amd64 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3+deb10u1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libcoro-perl-6.540/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libcoro-perl dpkg-buildpackage: info: source version 6.540-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Xavier Guimard dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libcoro-perl-6.540=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libcoro-perl-6.540=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.028001, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Coro. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Coro, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Coro with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Event version 1.27 found, building Event support. EV version 4.25 found, building EV support. Checking if your kit is complete... Looks good *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has a number of configuration options. Due to its maturity, the defaults that Coro chooses are usually fine, so you can decide to skip these questions. Only if something went wrong you should select 'n' here and manually configure Coro, and, of course, report this to the maintainer :) Skip further questions and use defaults (y/n)? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a number of methods to implement coroutines at the C level. The default chosen is based on your current confguration and is correct in most cases, but you still can chose between these alternatives: u The unix 'ucontext.h' functions are relatively new and not implemented or well-tested in older unices. They allow very fast coroutine creation and reasonably fast switching. They are, however, usually slower than the other alternatives due to an extra syscall done by swapcontext. And while nominally most portable (it's the only POSIX-standardised interface for coroutines), ucontext functions are, as usual, broken on most/all BSDs. s If the ucontext functions are not working or you don't want to use them for other reasons you can try a workaround using setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine creation is rather slow, but switching is very fast (often much faster than with the ucontext functions). Unfortunately, glibc-2.1 and below don't even feature a working sigaltstack. You cannot use this implementation if some other code uses SIGUSR2 or you plan to create coroutines from an alternative signal stack, as both are being used for coroutine creation. a Handcoded assembly. This is the fastest and most compatible method, with the least side effects, if it works, that is. It has been tested on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64 systems using the SVR ELF ABI (it is also reported to be working on Strawberry Perl for Windows using MinGW). This is the recommended method on supported platforms. When it doesn't work, use another method, such as (s)etjmp/longjmp. l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need this hack. Since it is very linux-specific it is also quite fast and recommended even for newer versions; when it works, that is (currently x86 and a few others only. If it compiles, it's usually ok). Newer glibc versions (>= 2.5) stop working with this implementation however. i IRIX. For some reason, SGI really does not like to follow POSIX (does that surprise you?), so this workaround might be needed (it's fast), although [s] and [u] should also work now. w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry Perl), although, as there is no standard on how to do this under windows, different environments might work differently. Doh. f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower and uses a lot more memory, but should be working all the time. p Use pthread API. Try to avoid this option, it was only created to make a point about the programming language shootout. It is unlikely to work with perls that have windows process emulation enabled ("perl threads"). It is also likely the slowest method of implementing coroutines. It might work fine as a last resort, however, as the pthread API is slightly better tested than ucontext functions for example. Of course, not on BSDs, who usually have very broken pthread implementations. Coro tries hard to come up with a suitable default for most systems, so pressing return at the prompt usually does the right thing. If you experience problems (e.g. make test fails) then you should experiment with this setting. Use which implementation, etjmp, ctx, sm, rix, inux,

threads, indows, iber? [a] a Using handcoded assembler implementation *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro Writing MYMETA.yml and MYMETA.json dh_auto_build make -j16 make[1]: Entering directory '/build/libcoro-perl-6.540' make[2]: Entering directory '/build/libcoro-perl-6.540/Coro' Running Mkbootstrap for State () "/usr/bin/perl" "/usr/share/perl/5.28.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' -typemap '/build/libcoro-perl-6.540/Coro/typemap' State.xs > State.xsc cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/State.pm blib/lib/Coro/State.pm cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro/Handle.pm blib/lib/Coro/Handle.pm cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/AIO.pm blib/lib/Coro/AIO.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro/BDB.pm blib/lib/Coro/BDB.pm cp Coro/Signal.pm blib/lib/Coro/Signal.pm cp Coro.pm blib/lib/Coro.pm cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/Select.pm blib/lib/Coro/Select.pm chmod 644 "State.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Skip ../blib/lib/Coro/Timer.pm (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) cp Intro.pod ../blib/lib/Coro/Intro.pod Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/State.pm (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Skip ../blib/lib/Coro/Signal.pm (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) Skip ../blib/lib/Coro/Semaphore.pm (unchanged) Skip ../blib/lib/Coro/Select.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) Skip ../blib/lib/Coro/RWLock.pm (unchanged) Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3889 mv State.xsc State.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcoro-perl-6.540=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.54\" -DXS_VERSION=\"6.54\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.28/CORE" -DCORO_ASM -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c rm -f ../blib/arch/auto/Coro/State/State.so x86_64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libcoro-perl-6.540=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \ \ chmod 755 ../blib/arch/auto/Coro/State/State.so Manifying 20 pod documents make[2]: Leaving directory '/build/libcoro-perl-6.540/Coro' make[2]: Entering directory '/build/libcoro-perl-6.540/Event' "/usr/bin/perl" "/usr/share/perl/5.28.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' Event.xs > Event.xsc Running Mkbootstrap for Event () chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 cp Event.pm ../blib/lib/Coro/Event.pm mv Event.xsc Event.c x86_64-linux-gnu-gcc -c -I/usr/lib/x86_64-linux-gnu/perl5/5.28/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcoro-perl-6.540=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.54\" -DXS_VERSION=\"6.54\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.28/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c rm -f ../blib/arch/auto/Coro/Event/Event.so x86_64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libcoro-perl-6.540=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \ \ chmod 755 ../blib/arch/auto/Coro/Event/Event.so Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.540/Event' make[2]: Entering directory '/build/libcoro-perl-6.540/EV' "/usr/bin/perl" "/usr/share/perl/5.28.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' EV.xs > EV.xsc Running Mkbootstrap for EV () chmod 644 "EV.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 cp EV.pm ../blib/lib/Coro/EV.pm mv EV.xsc EV.c x86_64-linux-gnu-gcc -c -I/usr/lib/x86_64-linux-gnu/perl5/5.28/EV -I/usr/lib/x86_64-linux-gnu/perl5/5.28 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libcoro-perl-6.540=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.54\" -DXS_VERSION=\"6.54\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.28/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c rm -f ../blib/arch/auto/Coro/EV/EV.so x86_64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libcoro-perl-6.540=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \ \ chmod 755 ../blib/arch/auto/Coro/EV/EV.so Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.540/EV' Manifying 20 pod documents make[1]: Leaving directory '/build/libcoro-perl-6.540' dh_auto_test make -j16 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libcoro-perl-6.540' make[2]: Entering directory '/build/libcoro-perl-6.540/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[2]: Leaving directory '/build/libcoro-perl-6.540/Coro' make[2]: Entering directory '/build/libcoro-perl-6.540/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.540/Event' make[2]: Entering directory '/build/libcoro-perl-6.540/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.540/EV' make[2]: Entering directory '/build/libcoro-perl-6.540/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 No tests defined for Coro::State extension. make[2]: Leaving directory '/build/libcoro-perl-6.540/Coro' make[2]: Entering directory '/build/libcoro-perl-6.540/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.10 cusr 0.07 csys = 0.21 CPU) Result: PASS make[2]: Leaving directory '/build/libcoro-perl-6.540/Event' make[2]: Entering directory '/build/libcoro-perl-6.540/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.11 cusr 0.06 csys = 0.20 CPU) Result: PASS make[2]: Leaving directory '/build/libcoro-perl-6.540/EV' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_basic.t .......... 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok t/01_process.t ........ 1..13 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok t/02_channel.t ........ 1..19 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok t/03_channel.t ........ 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/04_rwlock.t ......... 1..15 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok t/05_specific.t ....... 1..8 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok t/06_prio.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/07_eval.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/08_join.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/10_bugs.t ........... 1..3 ok 1 ok 2 ok 3 ok t/11_deadlock.t ....... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/12_exit.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/13_diewarn.t ........ 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/14_load.t ........... 1..17 ok 1 # Coro::State () ok 2 # Coro () ok 3 # Coro::MakeMaker () ok 4 # Coro::Signal () ok 5 # Coro::Semaphore () ok 6 # Coro::SemaphoreSet () ok 7 # Coro::Channel () ok 8 # Coro::Specific () ok 9 # Coro::RWLock () ok 10 # Coro::AnyEvent () ok 11 # Coro::Timer () ok 12 # Coro::Util () ok 13 # Coro::Select () ok 14 # Coro::Handle () ok 15 # Coro::Socket () ok 16 # Coro::Storable () ok 17 # Coro::Debug () ok t/15_semaphore.t ...... 1..6 ok 1 # 998 ok 2 ok 3 ok 4 ok 5 ok 6 ok t/16_signal.t ......... 1..18 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok t/17_rouse.t .......... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/18_winder.t ......... 1..17 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok t/19_handle.t ......... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/20_mutual_cancel.t .. 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok All tests successful. Files=20, Tests=196, 1 wallclock secs ( 0.09 usr 0.04 sys + 0.59 cusr 0.14 csys = 0.86 CPU) Result: PASS make[1]: Leaving directory '/build/libcoro-perl-6.540' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j16 install DESTDIR=/build/libcoro-perl-6.540/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libcoro-perl-6.540' make[2]: Entering directory '/build/libcoro-perl-6.540/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[2]: Leaving directory '/build/libcoro-perl-6.540/Coro' make[2]: Entering directory '/build/libcoro-perl-6.540/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.540/Event' make[2]: Entering directory '/build/libcoro-perl-6.540/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.540/EV' Manifying 20 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/EV/EV.so Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/Event/Event.so Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/auto/Coro/State/State.so Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/EV.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Event.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Intro.pod Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Select.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Storable.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Signal.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/BDB.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Specific.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/AIO.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Semaphore.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Socket.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/CoroAPI.h Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Handle.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/AnyEvent.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/State.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/jit-amd64-unix.pl Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Channel.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Debug.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/SemaphoreSet.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Util.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/RWLock.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/LWP.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/jit-x86-unix.pl Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/Timer.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.28/Coro/MakeMaker.pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm Installing /build/libcoro-perl-6.540/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm make[1]: Leaving directory '/build/libcoro-perl-6.540' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.540-1_amd64.deb'. dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.540-1_amd64.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libcoro-perl_6.540-1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: user script /srv/workspace/pbuilder/20339/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/20339/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/20339 and its subdirectories I: Current time: Mon Aug 15 12:07:07 +14 2022 I: pbuilder-time-stamp: 1660514827