I: pbuilder: network access will be disabled during build I: Current time: Thu Aug 12 04:49:51 +14 2021 I: pbuilder-time-stamp: 1628693391 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libperlio-gzip-perl_0.19-1.dsc] I: copying [./libperlio-gzip-perl_0.19.orig.tar.gz] I: copying [./libperlio-gzip-perl_0.19-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.9GCfYgG1/trustedkeys.kbx': General error gpgv: Signature made Tue Nov 10 10:30:59 2015 +14 gpgv: using RSA key BB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libperlio-gzip-perl_0.19-1.dsc dpkg-source: info: extracting libperlio-gzip-perl in libperlio-gzip-perl-0.19 dpkg-source: info: unpacking libperlio-gzip-perl_0.19.orig.tar.gz dpkg-source: info: unpacking libperlio-gzip-perl_0.19-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/23602/tmp/hooks/D01_modify_environment starting debug: Running on codethink14-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash Removing 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /bin/sh to /bin/sh.distrib by bash' Removing 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by bash' I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/23602/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/23602/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="1" [2]="4" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.1.4(1)-release' BUILDDIR=/build BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8' DIRSTACK=() DISTRIBUTION= EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/var/lib/jenkins HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=23602 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.jtjsxJnPXg/pbuilderrc_L3Tk --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.jtjsxJnPXg/b2 --logfile b2/build.log --extrapackages usrmerge libperlio-gzip-perl_0.19-1.dsc' SUDO_GID=117 SUDO_UID=110 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root USERNAME=root _='I: set' http_proxy=http://192.168.101.16:3128 I: uname -a Linux i-capture-the-hostname 4.15.0-153-generic #160-Ubuntu SMP Thu Jul 29 07:06:07 UTC 2021 aarch64 GNU/Linux I: ls -l /bin total 5252 -rwxr-xr-x 1 root root 1282512 Aug 5 10:25 bash -rwxr-xr-x 3 root root 34808 Jul 21 2020 bunzip2 -rwxr-xr-x 3 root root 34808 Jul 21 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 21 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 21 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 21 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 5 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 21 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 21 2020 bzgrep -rwxr-xr-x 3 root root 34808 Jul 21 2020 bzip2 -rwxr-xr-x 1 root root 14264 Jul 21 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 21 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 21 2020 bzmore -rwxr-xr-x 1 root root 39832 Sep 23 2020 cat -rwxr-xr-x 1 root root 64512 Sep 23 2020 chgrp -rwxr-xr-x 1 root root 60368 Sep 23 2020 chmod -rwxr-xr-x 1 root root 64528 Sep 23 2020 chown -rwxr-xr-x 1 root root 138896 Sep 23 2020 cp -rwxr-xr-x 1 root root 129544 Dec 11 2020 dash -rwxr-xr-x 1 root root 101384 Sep 23 2020 date -rwxr-xr-x 1 root root 80984 Sep 23 2020 dd -rwxr-xr-x 1 root root 89824 Sep 23 2020 df -rwxr-xr-x 1 root root 143088 Sep 23 2020 dir -rwxr-xr-x 1 root root 76152 Jul 29 09:09 dmesg lrwxrwxrwx 1 root root 8 Nov 8 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 8 2019 domainname -> hostname -rwxr-xr-x 1 root root 35632 Sep 23 2020 echo -rwxr-xr-x 1 root root 28 Nov 10 2020 egrep -rwxr-xr-x 1 root root 31512 Sep 23 2020 false -rwxr-xr-x 1 root root 28 Nov 10 2020 fgrep -rwxr-xr-x 1 root root 64856 Jul 29 09:09 findmnt -rwsr-xr-x 1 root root 34824 Feb 27 06:12 fusermount -rwxr-xr-x 1 root root 178400 Nov 10 2020 grep -rwxr-xr-x 2 root root 2346 Mar 3 13:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 3 13:30 gzexe -rwxr-xr-x 1 root root 93744 Mar 3 13:30 gzip -rwxr-xr-x 1 root root 18440 Nov 8 2019 hostname -rwxr-xr-x 1 root root 68720 Sep 23 2020 ln -rwxr-xr-x 1 root root 52720 Feb 8 2020 login -rwxr-xr-x 1 root root 143088 Sep 23 2020 ls -rwxr-xr-x 1 root root 161960 Jul 29 09:09 lsblk -rwxr-xr-x 1 root root 85200 Sep 23 2020 mkdir -rwxr-xr-x 1 root root 68744 Sep 23 2020 mknod -rwxr-xr-x 1 root root 43976 Sep 23 2020 mktemp -rwxr-xr-x 1 root root 51368 Jul 29 09:09 more -rwsr-xr-x 1 root root 51360 Jul 29 09:09 mount -rwxr-xr-x 1 root root 14496 Jul 29 09:09 mountpoint -rwxr-xr-x 1 root root 134808 Sep 23 2020 mv lrwxrwxrwx 1 root root 8 Nov 8 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 19 05:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 35720 Sep 23 2020 pwd lrwxrwxrwx 1 root root 4 Aug 5 10:25 rbash -> bash -rwxr-xr-x 1 root root 43872 Sep 23 2020 readlink -rwxr-xr-x 1 root root 68592 Sep 23 2020 rm -rwxr-xr-x 1 root root 43880 Sep 23 2020 rmdir -rwxr-xr-x 1 root root 19208 Sep 28 2020 run-parts -rwxr-xr-x 1 root root 114016 Dec 23 2018 sed lrwxrwxrwx 1 root root 4 Aug 12 04:50 sh -> bash lrwxrwxrwx 1 root root 4 Aug 10 23:25 sh.distrib -> dash -rwxr-xr-x 1 root root 35656 Sep 23 2020 sleep -rwxr-xr-x 1 root root 72640 Sep 23 2020 stty -rwsr-xr-x 1 root root 67776 Jul 29 09:09 su -rwxr-xr-x 1 root root 35672 Sep 23 2020 sync -rwxr-xr-x 1 root root 535768 Feb 17 23:55 tar -rwxr-xr-x 1 root root 10568 Sep 28 2020 tempfile -rwxr-xr-x 1 root root 89120 Sep 23 2020 touch -rwxr-xr-x 1 root root 31512 Sep 23 2020 true -rwxr-xr-x 1 root root 14264 Feb 27 06:12 ulockmgr_server -rwsr-xr-x 1 root root 30880 Jul 29 09:09 umount -rwxr-xr-x 1 root root 35640 Sep 23 2020 uname -rwxr-xr-x 2 root root 2346 Mar 3 13:30 uncompress -rwxr-xr-x 1 root root 143088 Sep 23 2020 vdir -rwxr-xr-x 1 root root 59584 Jul 29 09:09 wdctl lrwxrwxrwx 1 root root 8 Nov 8 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 3 13:30 zcat -rwxr-xr-x 1 root root 1678 Mar 3 13:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 3 13:30 zdiff -rwxr-xr-x 1 root root 29 Mar 3 13:30 zegrep -rwxr-xr-x 1 root root 29 Mar 3 13:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 3 13:30 zforce -rwxr-xr-x 1 root root 7585 Mar 3 13:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 3 13:30 zless -rwxr-xr-x 1 root root 1842 Mar 3 13:30 zmore -rwxr-xr-x 1 root root 4553 Mar 3 13:30 znew I: user script /srv/workspace/pbuilder/23602/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: perl, debhelper (>= 9.20120312~), zlib1g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9.20120312~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 18.1 MB of archives. After unpacking 67.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-8 [142 kB] Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB] Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB] Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB] Get: 6 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB] Get: 9 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB] Get: 11 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB] Get: 12 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB] Get: 13 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 23 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 24 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB] Get: 25 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB] Get: 26 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB] Get: 27 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB] Get: 28 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB] Get: 29 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main arm64 zlib1g-dev arm64 1:1.2.11.dfsg-2 [189 kB] Fetched 18.1 MB in 0s (48.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_arm64.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../01-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_arm64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../03-libpipeline1_1.5.3-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_arm64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_arm64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../07-libmagic1_1%3a5.39-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_arm64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_arm64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:arm64. Preparing to unpack .../10-libsigsegv2_2.13-1_arm64.deb ... Unpacking libsigsegv2:arm64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_arm64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../23-libelf1_0.183-1_arm64.deb ... Unpacking libelf1:arm64 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_arm64.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:arm64. Preparing to unpack .../25-libicu67_67.1-7_arm64.deb ... Unpacking libicu67:arm64 (67.1-7) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_arm64.deb ... Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_arm64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package zlib1g-dev:arm64. Preparing to unpack .../31-zlib1g-dev_1%3a1.2.11.dfsg-2_arm64.deb ... Unpacking zlib1g-dev:arm64 (1:1.2.11.dfsg-2) ... Setting up libpipeline1:arm64 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:arm64 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:arm64 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:arm64 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up zlib1g-dev:arm64 (1:1.2.11.dfsg-2) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libelf1:arm64 (0.183-1) ... Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). The following additional packages will be installed: libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl The following NEW packages will be installed: libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl usrmerge 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 59.5 kB of archives. After this operation, 157 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian bullseye/main arm64 libnumber-compare-perl all 0.03-1.1 [6956 B] Get:2 http://deb.debian.org/debian bullseye/main arm64 libtext-glob-perl all 0.11-1 [8888 B] Get:3 http://deb.debian.org/debian bullseye/main arm64 libfile-find-rule-perl all 0.34-1 [30.6 kB] Get:4 http://deb.debian.org/debian bullseye/main arm64 usrmerge all 25 [13.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 59.5 kB in 0s (1213 kB/s) Selecting previously unselected package libnumber-compare-perl. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21551 files and directories currently installed.) Preparing to unpack .../libnumber-compare-perl_0.03-1.1_all.deb ... Unpacking libnumber-compare-perl (0.03-1.1) ... Selecting previously unselected package libtext-glob-perl. Preparing to unpack .../libtext-glob-perl_0.11-1_all.deb ... Unpacking libtext-glob-perl (0.11-1) ... Selecting previously unselected package libfile-find-rule-perl. Preparing to unpack .../libfile-find-rule-perl_0.34-1_all.deb ... Unpacking libfile-find-rule-perl (0.34-1) ... Selecting previously unselected package usrmerge. Preparing to unpack .../archives/usrmerge_25_all.deb ... Unpacking usrmerge (25) ... Setting up libtext-glob-perl (0.11-1) ... Setting up libnumber-compare-perl (0.03-1.1) ... Setting up libfile-find-rule-perl (0.34-1) ... Setting up usrmerge (25) ... The system has been successfully converted. Processing triggers for man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. I: Building the package hostname: Temporary failure in name resolution I: Running cd /build/libperlio-gzip-perl-0.19/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libperlio-gzip-perl_0.19-1_source.changes dpkg-buildpackage: info: source package libperlio-gzip-perl dpkg-buildpackage: info: source version 0.19-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules build dh build dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_update_autotools_config dh_auto_configure dh_auto_configure: warning: Compatibility levels before 10 are deprecated (level 9 in use) perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/libperlio-gzip-perl-0.19=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libperlio-gzip-perl-0.19=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PerlIO::gzip Writing MYMETA.yml and MYMETA.json dh_auto_build dh_auto_build: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 make[1]: Entering directory '/build/libperlio-gzip-perl-0.19' cp gzip.pm blib/lib/PerlIO/gzip.pm Running Mkbootstrap for gzip () chmod 644 "gzip.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 "/usr/bin/perl" "/usr/share/perl/5.32/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.32/ExtUtils/typemap' gzip.xs > gzip.xsc mv gzip.xsc gzip.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build/libperlio-gzip-perl-0.19=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.19\" -DXS_VERSION=\"0.19\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.32/CORE" gzip.c rm -f blib/arch/auto/PerlIO/gzip/gzip.so aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libperlio-gzip-perl-0.19=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ -lz \ chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so Manifying 1 pod document make[1]: Leaving directory '/build/libperlio-gzip-perl-0.19' dh_auto_test dh_auto_test: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libperlio-gzip-perl-0.19' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/read.t ... 1..301 ok 1 - Does it even load? ok 2 - open ok3.gz with <:gzip ok 3 ok 4 - should be end of file ok 5 - close it again ok 6 - open ok3.gz with <:gzip() ok 7 ok 8 - should be end of file ok 9 - close it again ok 10 - open ok3.gz with <:gzip(gzip) ok 11 ok 12 - should be end of file ok 13 - close it again ok 14 - open ok3.gz with <:gzip(lazy) ok 15 ok 16 - should be end of file ok 17 - close it again ok 18 - open ok3.gz with <:gzip(gzip,lazy) ok 19 ok 20 - should be end of file ok 21 - close it again ok 22 - README should open ok 23 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 24 - open ok17.gz with <:gzip ok 25 ok 26 - should be end of file ok 27 - close it ok 28 - open ok19 with <:gzip(none) ok 29 ok 30 - open ok21 with < ok 31 ok 32 - Ho ho ho. Switch to gunzip mid stream. ok 33 ok 34 - open ok19 with <:gzip(auto) ok 35 ok 36 - should be end of file ok 37 - close it ok 38 - open ok3.gz with <:gzip(auto) ok 39 ok 40 - should be end of file ok 41 - close it ok 42 - open ok19 with <:gzip(lazy,auto) ok 43 ok 44 - should be end of file ok 45 - close it ok 46 - open ok3.gz with <:gzip(auto,lazy) ok 47 ok 48 - should be end of file ok 49 - close it ok 50 - README should open in lazy mode ok 51 - but should fail on first read ok 52 - README should open in auto mode ok 53 - but should fail on first read ok 54 - README should open in auto,lazy mode ok 55 - but should fail on first read # Attempting to run 'gzip -c --fast /usr/bin/perl >perl.gz' ok 56 - open perl.gz ok 57 - compare with original /usr/bin/perl ok 58 - should be end of file ok 59 - close perl.gz ok 60 - open README with <:gzip(autopop) ok 61 - read first line ok 62 - check second line ok 63 - open ok3.gz with <:gzip(autopop) ok 64 ok 65 - open ok50.gz.short with <:gzip ok 66 ok 67 - should be end of file ok 68 - close should fail ok 69 - open ok54.gz.len with <:gzip ok 70 ok 71 - should be end of file ok 72 - close should fail ok 73 - open ok58.gz.crc with <:gzip ok 74 ok 75 - should be end of file ok 76 - close should fail ok 77 - open ok3.gz with <:unix:gzip ok 78 ok 79 - should be end of file ok 80 - close it again ok 81 - open ok3.gz with <:unix:gzip() ok 82 ok 83 - should be end of file ok 84 - close it again ok 85 - open ok3.gz with <:unix:gzip(gzip) ok 86 ok 87 - should be end of file ok 88 - close it again ok 89 - open ok3.gz with <:unix:gzip(lazy) ok 90 ok 91 - should be end of file ok 92 - close it again ok 93 - open ok3.gz with <:unix:gzip(gzip,lazy) ok 94 ok 95 - should be end of file ok 96 - close it again ok 97 - README should open ok 98 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 99 - open ok17.gz with <:unix:gzip ok 100 ok 101 - should be end of file ok 102 - close it ok 103 - open ok19 with <:unix:gzip(none) ok 104 ok 105 - open ok21 with <:unix ok 106 ok 107 - Ho ho ho. Switch to gunzip mid stream. ok 108 ok 109 - open ok19 with <:unix:gzip(auto) ok 110 ok 111 - should be end of file ok 112 - close it ok 113 - open ok3.gz with <:unix:gzip(auto) ok 114 ok 115 - should be end of file ok 116 - close it ok 117 - open ok19 with <:unix:gzip(lazy,auto) ok 118 ok 119 - should be end of file ok 120 - close it ok 121 - open ok3.gz with <:unix:gzip(auto,lazy) ok 122 ok 123 - should be end of file ok 124 - close it ok 125 - README should open in lazy mode ok 126 - but should fail on first read ok 127 - README should open in auto mode ok 128 - but should fail on first read ok 129 - README should open in auto,lazy mode ok 130 - but should fail on first read ok 131 - open perl.gz ok 132 - compare with original /usr/bin/perl ok 133 - should be end of file ok 134 - close perl.gz ok 135 - open README with <:unix:gzip(autopop) ok 136 - read first line ok 137 - check second line ok 138 - open ok3.gz with <:unix:gzip(autopop) ok 139 ok 140 - open ok50.gz.short with <:unix:gzip ok 141 ok 142 - should be end of file ok 143 - close should fail ok 144 - open ok54.gz.len with <:unix:gzip ok 145 ok 146 - should be end of file ok 147 - close should fail ok 148 - open ok58.gz.crc with <:unix:gzip ok 149 ok 150 - should be end of file ok 151 - close should fail ok 152 - open ok3.gz with <:stdio:gzip ok 153 ok 154 - should be end of file ok 155 - close it again ok 156 - open ok3.gz with <:stdio:gzip() ok 157 ok 158 - should be end of file ok 159 - close it again ok 160 - open ok3.gz with <:stdio:gzip(gzip) ok 161 ok 162 - should be end of file ok 163 - close it again ok 164 - open ok3.gz with <:stdio:gzip(lazy) ok 165 ok 166 - should be end of file ok 167 - close it again ok 168 - open ok3.gz with <:stdio:gzip(gzip,lazy) ok 169 ok 170 - should be end of file ok 171 - close it again ok 172 - README should open ok 173 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 174 - open ok17.gz with <:stdio:gzip ok 175 ok 176 - should be end of file ok 177 - close it ok 178 - open ok19 with <:stdio:gzip(none) ok 179 ok 180 - open ok21 with <:stdio ok 181 ok 182 - Ho ho ho. Switch to gunzip mid stream. ok 183 ok 184 - open ok19 with <:stdio:gzip(auto) ok 185 ok 186 - should be end of file ok 187 - close it ok 188 - open ok3.gz with <:stdio:gzip(auto) ok 189 ok 190 - should be end of file ok 191 - close it ok 192 - open ok19 with <:stdio:gzip(lazy,auto) ok 193 ok 194 - should be end of file ok 195 - close it ok 196 - open ok3.gz with <:stdio:gzip(auto,lazy) ok 197 ok 198 - should be end of file ok 199 - close it ok 200 - README should open in lazy mode ok 201 - but should fail on first read ok 202 - README should open in auto mode ok 203 - but should fail on first read ok 204 - README should open in auto,lazy mode ok 205 - but should fail on first read ok 206 - open perl.gz ok 207 - compare with original /usr/bin/perl ok 208 - should be end of file ok 209 - close perl.gz ok 210 - open README with <:stdio:gzip(autopop) ok 211 - read first line ok 212 - check second line ok 213 - open ok3.gz with <:stdio:gzip(autopop) ok 214 ok 215 - open ok50.gz.short with <:stdio:gzip ok 216 ok 217 - should be end of file ok 218 - close should fail ok 219 - open ok54.gz.len with <:stdio:gzip ok 220 ok 221 - should be end of file ok 222 - close should fail ok 223 - open ok58.gz.crc with <:stdio:gzip ok 224 ok 225 - should be end of file ok 226 - close should fail ok 227 - open ok3.gz with <:perlio:gzip ok 228 ok 229 - should be end of file ok 230 - close it again ok 231 - open ok3.gz with <:perlio:gzip() ok 232 ok 233 - should be end of file ok 234 - close it again ok 235 - open ok3.gz with <:perlio:gzip(gzip) ok 236 ok 237 - should be end of file ok 238 - close it again ok 239 - open ok3.gz with <:perlio:gzip(lazy) ok 240 ok 241 - should be end of file ok 242 - close it again ok 243 - open ok3.gz with <:perlio:gzip(gzip,lazy) ok 244 ok 245 - should be end of file ok 246 - close it again ok 247 - README should open ok 248 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 249 - open ok17.gz with <:perlio:gzip ok 250 ok 251 - should be end of file ok 252 - close it ok 253 - open ok19 with <:perlio:gzip(none) ok 254 ok 255 - open ok21 with <:perlio ok 256 ok 257 - Ho ho ho. Switch to gunzip mid stream. ok 258 ok 259 - open ok19 with <:perlio:gzip(auto) ok 260 ok 261 - should be end of file ok 262 - close it ok 263 - open ok3.gz with <:perlio:gzip(auto) ok 264 ok 265 - should be end of file ok 266 - close it ok 267 - open ok19 with <:perlio:gzip(lazy,auto) ok 268 ok 269 - should be end of file ok 270 - close it ok 271 - open ok3.gz with <:perlio:gzip(auto,lazy) ok 272 ok 273 - should be end of file ok 274 - close it ok 275 - README should open in lazy mode ok 276 - but should fail on first read ok 277 - README should open in auto mode ok 278 - but should fail on first read ok 279 - README should open in auto,lazy mode ok 280 - but should fail on first read ok 281 - open perl.gz ok 282 - compare with original /usr/bin/perl ok 283 - should be end of file ok 284 - close perl.gz ok 285 - open README with <:perlio:gzip(autopop) ok 286 - read first line ok 287 - check second line ok 288 - open ok3.gz with <:perlio:gzip(autopop) ok 289 ok 290 - open ok50.gz.short with <:perlio:gzip ok 291 ok 292 - should be end of file ok 293 - close should fail ok 294 - open ok54.gz.len with <:perlio:gzip ok 295 ok 296 - should be end of file ok 297 - close should fail ok 298 - open ok58.gz.crc with <:perlio:gzip ok 299 ok 300 - should be end of file ok 301 - close should fail ok t/write.t .. 1..260 ok 1 - open foo as >:gzip ok 2 - close it straight away ok 3 - empty gzip file should be 20 bytes ok 4 - open foo as >:gzip ok 5 - print to it ok 6 - close it ok 7 - open foo for reading ok 8 - check we get same thing back ok 9 - should be end of file ok 10 - close it ok 11 - open foo as >:gzip(autopop) ok 12 - print to it ok 13 - close it ok 14 - open foo for reading [just '<'] ok 15 - check we get same thing back ok 16 - should be end of file ok 17 - close it ok 18 - open >:gzip [about to write 1282512 bytes] ok 19 - print contents of /bin/sh ok 20 - close it ok 21 - open <:gzip ok 22 - compare compressed copy with '/bin/sh' ok 23 - should be end of file ok 24 - close it ok 25 - open empty as >:gzip(lazy) ok 26 - close it ok 27 - check it is zero length ok 28 - open foo as >:gzip(lazy) ok 29 - print to it ok 30 - print to it with $\ set ok 31 - close it ok 32 - open foo for reading ok 33 - check we get message back ok 34 - check we get message2 back ok 35 - should be end of file ok 36 - close it ok 37 - open foo as >:gzip(none) ok 38 - print to it ok 39 - close it ok 40 - no header, so open <:gzip should fail ok 41 - open foo for reading ok 42 - check we get same thing back ok 43 - should be end of file ok 44 - close it ok 45 - open +<:gzip should fail, as read/write unsupported ok 46 - check file empty was not created ok 47 - open +>:gzip should fail, as read/write unsupported not ok 48 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 49 - open +< ok 50 - binmode ':gzip' should fail on read/write ok 51 - close it ok 52 - open +> ok 53 - binmode ':gzip' should fail on read/write ok 54 - close it ok 55 - open foo as > ok 56 - print to it ok 57 - binmode ':gzip(none)' ok 58 - print to it ok 59 - close it ok 60 - open foo as < ok 61 - check we get uncompressed message ok 62 - binmode ':gzip(none)' ok 63 - check we get compressed message ok 64 - should be end of file ok 65 - close it ok 66 - open foo as >:unix:gzip ok 67 - close it straight away ok 68 - empty gzip file should be 20 bytes ok 69 - open foo as >:unix:gzip ok 70 - print to it ok 71 - close it ok 72 - open foo for reading ok 73 - check we get same thing back ok 74 - should be end of file ok 75 - close it ok 76 - open foo as >:unix:gzip(autopop) ok 77 - print to it ok 78 - close it ok 79 - open foo for reading [just '<'] ok 80 - check we get same thing back ok 81 - should be end of file ok 82 - close it ok 83 - open >:unix:gzip [about to write 1282512 bytes] ok 84 - print contents of /bin/sh ok 85 - close it ok 86 - open <:unix:gzip ok 87 - compare compressed copy with '/bin/sh' ok 88 - should be end of file ok 89 - close it ok 90 - open empty as >:unix:gzip(lazy) ok 91 - close it ok 92 - check it is zero length ok 93 - open foo as >:unix:gzip(lazy) ok 94 - print to it ok 95 - print to it with $\ set ok 96 - close it ok 97 - open foo for reading ok 98 - check we get message back ok 99 - check we get message2 back ok 100 - should be end of file ok 101 - close it ok 102 - open foo as >:unix:gzip(none) ok 103 - print to it ok 104 - close it ok 105 - no header, so open <:unix:gzip should fail ok 106 - open foo for reading ok 107 - check we get same thing back ok 108 - should be end of file ok 109 - close it ok 110 - open +<:unix:gzip should fail, as read/write unsupported ok 111 - check file empty was not created ok 112 - open +>:unix:gzip should fail, as read/write unsupported not ok 113 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 114 - open +<:unix ok 115 - binmode ':gzip' should fail on read/write ok 116 - close it ok 117 - open +>:unix ok 118 - binmode ':gzip' should fail on read/write ok 119 - close it ok 120 - open foo as >:unix ok 121 - print to it ok 122 - binmode ':gzip(none)' ok 123 - print to it ok 124 - close it ok 125 - open foo as <:unix ok 126 - check we get uncompressed message ok 127 - binmode ':gzip(none)' ok 128 - check we get compressed message ok 129 - should be end of file ok 130 - close it ok 131 - open foo as >:stdio:gzip ok 132 - close it straight away ok 133 - empty gzip file should be 20 bytes ok 134 - open foo as >:stdio:gzip ok 135 - print to it ok 136 - close it ok 137 - open foo for reading ok 138 - check we get same thing back ok 139 - should be end of file ok 140 - close it ok 141 - open foo as >:stdio:gzip(autopop) ok 142 - print to it ok 143 - close it ok 144 - open foo for reading [just '<'] ok 145 - check we get same thing back ok 146 - should be end of file ok 147 - close it ok 148 - open >:stdio:gzip [about to write 1282512 bytes] ok 149 - print contents of /bin/sh ok 150 - close it ok 151 - open <:stdio:gzip ok 152 - compare compressed copy with '/bin/sh' ok 153 - should be end of file ok 154 - close it ok 155 - open empty as >:stdio:gzip(lazy) ok 156 - close it ok 157 - check it is zero length ok 158 - open foo as >:stdio:gzip(lazy) ok 159 - print to it ok 160 - print to it with $\ set ok 161 - close it ok 162 - open foo for reading ok 163 - check we get message back ok 164 - check we get message2 back ok 165 - should be end of file ok 166 - close it ok 167 - open foo as >:stdio:gzip(none) ok 168 - print to it ok 169 - close it ok 170 - no header, so open <:stdio:gzip should fail ok 171 - open foo for reading ok 172 - check we get same thing back ok 173 - should be end of file ok 174 - close it ok 175 - open +<:stdio:gzip should fail, as read/write unsupported ok 176 - check file empty was not created ok 177 - open +>:stdio:gzip should fail, as read/write unsupported not ok 178 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 179 - open +<:stdio ok 180 - binmode ':gzip' should fail on read/write ok 181 - close it ok 182 - open +>:stdio ok 183 - binmode ':gzip' should fail on read/write ok 184 - close it ok 185 - open foo as >:stdio ok 186 - print to it ok 187 - binmode ':gzip(none)' ok 188 - print to it ok 189 - close it ok 190 - open foo as <:stdio ok 191 - check we get uncompressed message ok 192 - binmode ':gzip(none)' ok 193 - check we get compressed message ok 194 - should be end of file ok 195 - close it ok 196 - open foo as >:perlio:gzip ok 197 - close it straight away ok 198 - empty gzip file should be 20 bytes ok 199 - open foo as >:perlio:gzip ok 200 - print to it ok 201 - close it ok 202 - open foo for reading ok 203 - check we get same thing back ok 204 - should be end of file ok 205 - close it ok 206 - open foo as >:perlio:gzip(autopop) ok 207 - print to it ok 208 - close it ok 209 - open foo for reading [just '<'] ok 210 - check we get same thing back ok 211 - should be end of file ok 212 - close it ok 213 - open >:perlio:gzip [about to write 1282512 bytes] ok 214 - print contents of /bin/sh ok 215 - close it ok 216 - open <:perlio:gzip ok 217 - compare compressed copy with '/bin/sh' ok 218 - should be end of file ok 219 - close it ok 220 - open empty as >:perlio:gzip(lazy) ok 221 - close it ok 222 - check it is zero length ok 223 - open foo as >:perlio:gzip(lazy) ok 224 - print to it ok 225 - print to it with $\ set ok 226 - close it ok 227 - open foo for reading ok 228 - check we get message back ok 229 - check we get message2 back ok 230 - should be end of file ok 231 - close it ok 232 - open foo as >:perlio:gzip(none) ok 233 - print to it ok 234 - close it ok 235 - no header, so open <:perlio:gzip should fail ok 236 - open foo for reading ok 237 - check we get same thing back ok 238 - should be end of file ok 239 - close it ok 240 - open +<:perlio:gzip should fail, as read/write unsupported ok 241 - check file empty was not created ok 242 - open +>:perlio:gzip should fail, as read/write unsupported not ok 243 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 244 - open +<:perlio ok 245 - binmode ':gzip' should fail on read/write ok 246 - close it ok 247 - open +>:perlio ok 248 - binmode ':gzip' should fail on read/write ok 249 - close it ok 250 - open foo as >:perlio ok 251 - print to it ok 252 - binmode ':gzip(none)' ok 253 - print to it ok 254 - close it ok 255 - open foo as <:perlio ok 256 - check we get uncompressed message ok 257 - binmode ':gzip(none)' ok 258 - check we get compressed message ok 259 - should be end of file ok 260 - close it ok All tests successful. Files=2, Tests=561, 3 wallclock secs ( 0.16 usr 0.02 sys + 1.79 cusr 0.10 csys = 2.07 CPU) Result: PASS make[1]: Leaving directory '/build/libperlio-gzip-perl-0.19' fakeroot debian/rules binary dh binary dh: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_testroot dh_prep dh_auto_install dh_auto_install: warning: Compatibility levels before 10 are deprecated (level 9 in use) make -j1 install DESTDIR=/build/libperlio-gzip-perl-0.19/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libperlio-gzip-perl-0.19' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libperlio-gzip-perl-0.19/debian/libperlio-gzip-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/auto/PerlIO/gzip/gzip.so Installing /build/libperlio-gzip-perl-0.19/debian/libperlio-gzip-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/PerlIO/gzip.pm Installing /build/libperlio-gzip-perl-0.19/debian/libperlio-gzip-perl/usr/share/man/man3/PerlIO::gzip.3pm make[1]: Leaving directory '/build/libperlio-gzip-perl-0.19' dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installchangelogs dh_installchangelogs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installman dh_installman: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_perl dh_link dh_strip_nondeterminism dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_fixperms dh_missing dh_missing: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_makeshlibs dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in '../libperlio-gzip-perl-dbgsym_0.19-1_arm64.deb'. dpkg-deb: building package 'libperlio-gzip-perl' in '../libperlio-gzip-perl_0.19-1_arm64.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libperlio-gzip-perl_0.19-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/23602/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/23602/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/23602 and its subdirectories I: Current time: Thu Aug 12 04:50:46 +14 2021 I: pbuilder-time-stamp: 1628693446