I: pbuilder: network access will be disabled during build
I: Current time: Fri Sep 16 00:44:22 -12 2022
I: pbuilder-time-stamp: 1663332262
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz]
I: copying local configuration
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: policy-rc.d already exists
I: Copying source file
I: copying [libio-async-perl_0.78-1.dsc]
I: copying [./libio-async-perl_0.78.orig.tar.gz]
I: copying [./libio-async-perl_0.78-1.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/tmp/dpkg-verify-sig.PTTehK50/trustedkeys.kbx': General error
gpgv: Signature made Sat Jan 23 08:35:34 2021 -12
gpgv:                using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./libio-async-perl_0.78-1.dsc
dpkg-source: info: extracting libio-async-perl in libio-async-perl-0.78
dpkg-source: info: unpacking libio-async-perl_0.78.orig.tar.gz
dpkg-source: info: unpacking libio-async-perl_0.78-1.debian.tar.xz
I: Not using root during the build.
I: Installing the build-deps
I: user script /srv/workspace/pbuilder/15500/tmp/hooks/D02_print_environment starting
I: set
  BUILDDIR='/build'
  BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other'
  BUILDUSERNAME='pbuilder1'
  BUILD_ARCH='arm64'
  DEBIAN_FRONTEND='noninteractive'
  DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8'
  DISTRIBUTION=''
  HOME='/var/lib/jenkins'
  HOST_ARCH='arm64'
  IFS=' 	
  '
  LANG='C'
  LANGUAGE='en_US:en'
  LC_ALL='C'
  MAIL='/var/mail/root'
  OPTIND='1'
  PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games'
  PBCURRENTCOMMANDLINEOPERATION='build'
  PBUILDER_OPERATION='build'
  PBUILDER_PKGDATADIR='/usr/share/pbuilder'
  PBUILDER_PKGLIBDIR='/usr/lib/pbuilder'
  PBUILDER_SYSCONFDIR='/etc'
  PPID='15500'
  PS1='# '
  PS2='> '
  PS4='+ '
  PWD='/'
  SHELL='/bin/bash'
  SHLVL='2'
  SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.KenVXAkoNh/pbuilderrc_Y0PY --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.KenVXAkoNh/b1 --logfile b1/build.log libio-async-perl_0.78-1.dsc'
  SUDO_GID='117'
  SUDO_UID='110'
  SUDO_USER='jenkins'
  TERM='unknown'
  TZ='/usr/share/zoneinfo/Etc/GMT+12'
  USER='root'
  USERNAME='root'
  _='/usr/bin/systemd-run'
  http_proxy='http://192.168.101.16:3128'
I: uname -a
  Linux codethink13-arm64 4.15.0-153-generic #160-Ubuntu SMP Thu Jul 29 07:06:07 UTC 2021 aarch64 GNU/Linux
I: ls -l /bin
  total 5252
  -rwxr-xr-x 1 root root 1282512 Aug  4  2021 bash
  -rwxr-xr-x 3 root root   34808 Jul 20  2020 bunzip2
  -rwxr-xr-x 3 root root   34808 Jul 20  2020 bzcat
  lrwxrwxrwx 1 root root       6 Jul 20  2020 bzcmp -> bzdiff
  -rwxr-xr-x 1 root root    2225 Jul 20  2020 bzdiff
  lrwxrwxrwx 1 root root       6 Jul 20  2020 bzegrep -> bzgrep
  -rwxr-xr-x 1 root root    4877 Sep  4  2019 bzexe
  lrwxrwxrwx 1 root root       6 Jul 20  2020 bzfgrep -> bzgrep
  -rwxr-xr-x 1 root root    3775 Jul 20  2020 bzgrep
  -rwxr-xr-x 3 root root   34808 Jul 20  2020 bzip2
  -rwxr-xr-x 1 root root   14264 Jul 20  2020 bzip2recover
  lrwxrwxrwx 1 root root       6 Jul 20  2020 bzless -> bzmore
  -rwxr-xr-x 1 root root    1297 Jul 20  2020 bzmore
  -rwxr-xr-x 1 root root   39832 Sep 22  2020 cat
  -rwxr-xr-x 1 root root   64512 Sep 22  2020 chgrp
  -rwxr-xr-x 1 root root   60368 Sep 22  2020 chmod
  -rwxr-xr-x 1 root root   64528 Sep 22  2020 chown
  -rwxr-xr-x 1 root root  138896 Sep 22  2020 cp
  -rwxr-xr-x 1 root root  129544 Dec 10  2020 dash
  -rwxr-xr-x 1 root root  101384 Sep 22  2020 date
  -rwxr-xr-x 1 root root   80984 Sep 22  2020 dd
  -rwxr-xr-x 1 root root   89824 Sep 22  2020 df
  -rwxr-xr-x 1 root root  143088 Sep 22  2020 dir
  -rwxr-xr-x 1 root root   76152 Jul 28  2021 dmesg
  lrwxrwxrwx 1 root root       8 Nov  6  2019 dnsdomainname -> hostname
  lrwxrwxrwx 1 root root       8 Nov  6  2019 domainname -> hostname
  -rwxr-xr-x 1 root root   35632 Sep 22  2020 echo
  -rwxr-xr-x 1 root root      28 Nov  9  2020 egrep
  -rwxr-xr-x 1 root root   31512 Sep 22  2020 false
  -rwxr-xr-x 1 root root      28 Nov  9  2020 fgrep
  -rwxr-xr-x 1 root root   64856 Jul 28  2021 findmnt
  -rwsr-xr-x 1 root root   34824 Feb 26  2021 fusermount
  -rwxr-xr-x 1 root root  178400 Nov  9  2020 grep
  -rwxr-xr-x 2 root root    2346 Mar  2  2021 gunzip
  -rwxr-xr-x 1 root root    6376 Mar  2  2021 gzexe
  -rwxr-xr-x 1 root root   93744 Mar  2  2021 gzip
  -rwxr-xr-x 1 root root   18440 Nov  6  2019 hostname
  -rwxr-xr-x 1 root root   68720 Sep 22  2020 ln
  -rwxr-xr-x 1 root root   52720 Feb  7  2020 login
  -rwxr-xr-x 1 root root  143088 Sep 22  2020 ls
  -rwxr-xr-x 1 root root  161960 Jul 28  2021 lsblk
  -rwxr-xr-x 1 root root   85200 Sep 22  2020 mkdir
  -rwxr-xr-x 1 root root   68744 Sep 22  2020 mknod
  -rwxr-xr-x 1 root root   43976 Sep 22  2020 mktemp
  -rwxr-xr-x 1 root root   51368 Jul 28  2021 more
  -rwsr-xr-x 1 root root   51360 Jul 28  2021 mount
  -rwxr-xr-x 1 root root   14496 Jul 28  2021 mountpoint
  -rwxr-xr-x 1 root root  134808 Sep 22  2020 mv
  lrwxrwxrwx 1 root root       8 Nov  6  2019 nisdomainname -> hostname
  lrwxrwxrwx 1 root root      14 Apr 18  2021 pidof -> /sbin/killall5
  -rwxr-xr-x 1 root root   35720 Sep 22  2020 pwd
  lrwxrwxrwx 1 root root       4 Aug  4  2021 rbash -> bash
  -rwxr-xr-x 1 root root   43872 Sep 22  2020 readlink
  -rwxr-xr-x 1 root root   68592 Sep 22  2020 rm
  -rwxr-xr-x 1 root root   43880 Sep 22  2020 rmdir
  -rwxr-xr-x 1 root root   19208 Sep 27  2020 run-parts
  -rwxr-xr-x 1 root root  114016 Dec 22  2018 sed
  lrwxrwxrwx 1 root root       4 Sep 15 03:48 sh -> dash
  -rwxr-xr-x 1 root root   35656 Sep 22  2020 sleep
  -rwxr-xr-x 1 root root   72640 Sep 22  2020 stty
  -rwsr-xr-x 1 root root   67776 Jul 28  2021 su
  -rwxr-xr-x 1 root root   35672 Sep 22  2020 sync
  -rwxr-xr-x 1 root root  535768 Feb 16  2021 tar
  -rwxr-xr-x 1 root root   10568 Sep 27  2020 tempfile
  -rwxr-xr-x 1 root root   89120 Sep 22  2020 touch
  -rwxr-xr-x 1 root root   31512 Sep 22  2020 true
  -rwxr-xr-x 1 root root   14264 Feb 26  2021 ulockmgr_server
  -rwsr-xr-x 1 root root   30880 Jul 28  2021 umount
  -rwxr-xr-x 1 root root   35640 Sep 22  2020 uname
  -rwxr-xr-x 2 root root    2346 Mar  2  2021 uncompress
  -rwxr-xr-x 1 root root  143088 Sep 22  2020 vdir
  -rwxr-xr-x 1 root root   59584 Jul 28  2021 wdctl
  lrwxrwxrwx 1 root root       8 Nov  6  2019 ypdomainname -> hostname
  -rwxr-xr-x 1 root root    1984 Mar  2  2021 zcat
  -rwxr-xr-x 1 root root    1678 Mar  2  2021 zcmp
  -rwxr-xr-x 1 root root    5880 Mar  2  2021 zdiff
  -rwxr-xr-x 1 root root      29 Mar  2  2021 zegrep
  -rwxr-xr-x 1 root root      29 Mar  2  2021 zfgrep
  -rwxr-xr-x 1 root root    2081 Mar  2  2021 zforce
  -rwxr-xr-x 1 root root    7585 Mar  2  2021 zgrep
  -rwxr-xr-x 1 root root    2206 Mar  2  2021 zless
  -rwxr-xr-x 1 root root    1842 Mar  2  2021 zmore
  -rwxr-xr-x 1 root root    4553 Mar  2  2021 znew
I: user script /srv/workspace/pbuilder/15500/tmp/hooks/D02_print_environment finished
 -> Attempting to satisfy build-dependencies
 -> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: arm64
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
 This package was created automatically by pbuilder to satisfy the
 build-dependencies of the package being currently built.
Depends: debhelper-compat (= 13), libmodule-build-perl, perl, libfuture-perl (>= 0.33), libio-socket-ip-perl, libmetrics-any-perl, libsereal-perl, libsocket-perl, libstruct-dumb-perl, libtest-fatal-perl, libtest-identity-perl, libtest-metrics-any-perl, libtest-pod-perl, libtest-refcount-perl, netbase
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19646 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
 pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however:
  Package debhelper-compat is not installed.
 pbuilder-satisfydepends-dummy depends on libmodule-build-perl; however:
  Package libmodule-build-perl is not installed.
 pbuilder-satisfydepends-dummy depends on libfuture-perl (>= 0.33); however:
  Package libfuture-perl is not installed.
 pbuilder-satisfydepends-dummy depends on libmetrics-any-perl; however:
  Package libmetrics-any-perl is not installed.
 pbuilder-satisfydepends-dummy depends on libsereal-perl; however:
  Package libsereal-perl is not installed.
 pbuilder-satisfydepends-dummy depends on libstruct-dumb-perl; however:
  Package libstruct-dumb-perl is not installed.
 pbuilder-satisfydepends-dummy depends on libtest-fatal-perl; however:
  Package libtest-fatal-perl is not installed.
 pbuilder-satisfydepends-dummy depends on libtest-identity-perl; however:
  Package libtest-identity-perl is not installed.
 pbuilder-satisfydepends-dummy depends on libtest-metrics-any-perl; however:
  Package libtest-metrics-any-perl is not installed.
 pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however:
  Package libtest-pod-perl is not installed.
 pbuilder-satisfydepends-dummy depends on libtest-refcount-perl; however:
  Package libtest-refcount-perl is not installed.
 pbuilder-satisfydepends-dummy depends on netbase; however:
  Package netbase is not installed.

Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
The following NEW packages will be installed:
  autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libfuture-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libmetrics-any-perl{a} libmodule-build-perl{a} libpipeline1{a} libsereal-decoder-perl{a} libsereal-encoder-perl{a} libsereal-perl{a} libsigsegv2{a} libstruct-dumb-perl{a} libsub-override-perl{a} libtest-fatal-perl{a} libtest-identity-perl{a} libtest-metrics-any-perl{a} libtest-pod-perl{a} libtest-refcount-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} netbase{a} po-debconf{a} sensible-utils{a} 
The following packages are RECOMMENDED but will NOT be installed:
  curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libmodule-signature-perl libpod-readme-perl libsoftware-license-perl lynx wget 
0 packages upgraded, 45 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.6 MB of archives. After unpacking 69.1 MB will be used.
Writing extended state information...
Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-8 [142 kB]
Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB]
Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB]
Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB]
Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB]
Get: 6 http://deb.debian.org/debian bullseye/main arm64 netbase all 6.3 [19.9 kB]
Get: 7 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB]
Get: 8 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB]
Get: 9 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB]
Get: 10 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB]
Get: 11 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB]
Get: 12 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB]
Get: 13 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB]
Get: 14 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB]
Get: 15 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB]
Get: 16 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB]
Get: 17 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB]
Get: 18 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB]
Get: 19 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB]
Get: 20 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB]
Get: 21 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB]
Get: 22 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB]
Get: 23 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB]
Get: 24 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB]
Get: 25 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB]
Get: 26 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB]
Get: 27 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB]
Get: 28 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB]
Get: 29 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB]
Get: 30 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB]
Get: 31 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get: 32 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB]
Get: 33 http://deb.debian.org/debian bullseye/main arm64 libfuture-perl all 0.47-1 [84.7 kB]
Get: 34 http://deb.debian.org/debian bullseye/main arm64 libmetrics-any-perl all 0.06-1 [41.8 kB]
Get: 35 http://deb.debian.org/debian bullseye/main arm64 libmodule-build-perl all 0.423100-1 [258 kB]
Get: 36 http://deb.debian.org/debian bullseye/main arm64 libsereal-decoder-perl arm64 4.018+ds-1+b1 [95.3 kB]
Get: 37 http://deb.debian.org/debian bullseye/main arm64 libsereal-encoder-perl arm64 4.018+ds-1+b1 [98.3 kB]
Get: 38 http://deb.debian.org/debian bullseye/main arm64 libsereal-perl all 4.018-1 [12.1 kB]
Get: 39 http://deb.debian.org/debian bullseye/main arm64 libstruct-dumb-perl all 0.12-1 [12.9 kB]
Get: 40 http://deb.debian.org/debian bullseye/main arm64 libtry-tiny-perl all 0.30-1 [23.3 kB]
Get: 41 http://deb.debian.org/debian bullseye/main arm64 libtest-fatal-perl all 0.016-1 [13.3 kB]
Get: 42 http://deb.debian.org/debian bullseye/main arm64 libtest-identity-perl all 0.01-2.1 [6464 B]
Get: 43 http://deb.debian.org/debian bullseye/main arm64 libtest-metrics-any-perl all 0.01-2 [7060 B]
Get: 44 http://deb.debian.org/debian bullseye/main arm64 libtest-pod-perl all 1.52-1 [14.2 kB]
Get: 45 http://deb.debian.org/debian bullseye/main arm64 libtest-refcount-perl all 0.10-1 [12.3 kB]
Fetched 18.6 MB in 0s (39.3 MB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package bsdextrautils.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19646 files and directories currently installed.)
Preparing to unpack .../00-bsdextrautils_2.36.1-8_arm64.deb ...
Unpacking bsdextrautils (2.36.1-8) ...
Selecting previously unselected package libuchardet0:arm64.
Preparing to unpack .../01-libuchardet0_0.0.7-1_arm64.deb ...
Unpacking libuchardet0:arm64 (0.0.7-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../02-groff-base_1.22.4-6_arm64.deb ...
Unpacking groff-base (1.22.4-6) ...
Selecting previously unselected package libpipeline1:arm64.
Preparing to unpack .../03-libpipeline1_1.5.3-1_arm64.deb ...
Unpacking libpipeline1:arm64 (1.5.3-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../04-man-db_2.9.4-2_arm64.deb ...
Unpacking man-db (2.9.4-2) ...
Selecting previously unselected package netbase.
Preparing to unpack .../05-netbase_6.3_all.deb ...
Unpacking netbase (6.3) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../06-sensible-utils_0.0.14_all.deb ...
Unpacking sensible-utils (0.0.14) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../07-libmagic-mgc_1%3a5.39-3_arm64.deb ...
Unpacking libmagic-mgc (1:5.39-3) ...
Selecting previously unselected package libmagic1:arm64.
Preparing to unpack .../08-libmagic1_1%3a5.39-3_arm64.deb ...
Unpacking libmagic1:arm64 (1:5.39-3) ...
Selecting previously unselected package file.
Preparing to unpack .../09-file_1%3a5.39-3_arm64.deb ...
Unpacking file (1:5.39-3) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../10-gettext-base_0.21-4_arm64.deb ...
Unpacking gettext-base (0.21-4) ...
Selecting previously unselected package libsigsegv2:arm64.
Preparing to unpack .../11-libsigsegv2_2.13-1_arm64.deb ...
Unpacking libsigsegv2:arm64 (2.13-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../12-m4_1.4.18-5_arm64.deb ...
Unpacking m4 (1.4.18-5) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../13-autoconf_2.69-14_all.deb ...
Unpacking autoconf (2.69-14) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../14-autotools-dev_20180224.1+nmu1_all.deb ...
Unpacking autotools-dev (20180224.1+nmu1) ...
Selecting previously unselected package automake.
Preparing to unpack .../15-automake_1%3a1.16.3-2_all.deb ...
Unpacking automake (1:1.16.3-2) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../16-autopoint_0.21-4_all.deb ...
Unpacking autopoint (0.21-4) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../17-libdebhelper-perl_13.3.4_all.deb ...
Unpacking libdebhelper-perl (13.3.4) ...
Selecting previously unselected package libtool.
Preparing to unpack .../18-libtool_2.4.6-15_all.deb ...
Unpacking libtool (2.4.6-15) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../19-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../20-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../21-libsub-override-perl_0.09-2_all.deb ...
Unpacking libsub-override-perl (0.09-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../23-dh-strip-nondeterminism_1.12.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.12.0-1) ...
Selecting previously unselected package libelf1:arm64.
Preparing to unpack .../24-libelf1_0.183-1_arm64.deb ...
Unpacking libelf1:arm64 (0.183-1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../25-dwz_0.13+20210201-1_arm64.deb ...
Unpacking dwz (0.13+20210201-1) ...
Selecting previously unselected package libicu67:arm64.
Preparing to unpack .../26-libicu67_67.1-7_arm64.deb ...
Unpacking libicu67:arm64 (67.1-7) ...
Selecting previously unselected package libxml2:arm64.
Preparing to unpack .../27-libxml2_2.9.10+dfsg-6.7_arm64.deb ...
Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ...
Selecting previously unselected package gettext.
Preparing to unpack .../28-gettext_0.21-4_arm64.deb ...
Unpacking gettext (0.21-4) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../29-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../31-debhelper_13.3.4_all.deb ...
Unpacking debhelper (13.3.4) ...
Selecting previously unselected package libfuture-perl.
Preparing to unpack .../32-libfuture-perl_0.47-1_all.deb ...
Unpacking libfuture-perl (0.47-1) ...
Selecting previously unselected package libmetrics-any-perl.
Preparing to unpack .../33-libmetrics-any-perl_0.06-1_all.deb ...
Unpacking libmetrics-any-perl (0.06-1) ...
Selecting previously unselected package libmodule-build-perl.
Preparing to unpack .../34-libmodule-build-perl_0.423100-1_all.deb ...
Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl'
Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl'
Unpacking libmodule-build-perl (0.423100-1) ...
Selecting previously unselected package libsereal-decoder-perl.
Preparing to unpack .../35-libsereal-decoder-perl_4.018+ds-1+b1_arm64.deb ...
Unpacking libsereal-decoder-perl (4.018+ds-1+b1) ...
Selecting previously unselected package libsereal-encoder-perl.
Preparing to unpack .../36-libsereal-encoder-perl_4.018+ds-1+b1_arm64.deb ...
Unpacking libsereal-encoder-perl (4.018+ds-1+b1) ...
Selecting previously unselected package libsereal-perl.
Preparing to unpack .../37-libsereal-perl_4.018-1_all.deb ...
Unpacking libsereal-perl (4.018-1) ...
Selecting previously unselected package libstruct-dumb-perl.
Preparing to unpack .../38-libstruct-dumb-perl_0.12-1_all.deb ...
Unpacking libstruct-dumb-perl (0.12-1) ...
Selecting previously unselected package libtry-tiny-perl.
Preparing to unpack .../39-libtry-tiny-perl_0.30-1_all.deb ...
Unpacking libtry-tiny-perl (0.30-1) ...
Selecting previously unselected package libtest-fatal-perl.
Preparing to unpack .../40-libtest-fatal-perl_0.016-1_all.deb ...
Unpacking libtest-fatal-perl (0.016-1) ...
Selecting previously unselected package libtest-identity-perl.
Preparing to unpack .../41-libtest-identity-perl_0.01-2.1_all.deb ...
Unpacking libtest-identity-perl (0.01-2.1) ...
Selecting previously unselected package libtest-metrics-any-perl.
Preparing to unpack .../42-libtest-metrics-any-perl_0.01-2_all.deb ...
Unpacking libtest-metrics-any-perl (0.01-2) ...
Selecting previously unselected package libtest-pod-perl.
Preparing to unpack .../43-libtest-pod-perl_1.52-1_all.deb ...
Unpacking libtest-pod-perl (1.52-1) ...
Selecting previously unselected package libtest-refcount-perl.
Preparing to unpack .../44-libtest-refcount-perl_0.10-1_all.deb ...
Unpacking libtest-refcount-perl (0.10-1) ...
Setting up libpipeline1:arm64 (1.5.3-1) ...
Setting up libstruct-dumb-perl (0.12-1) ...
Setting up bsdextrautils (2.36.1-8) ...
update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode
Setting up libicu67:arm64 (67.1-7) ...
Setting up libmagic-mgc (1:5.39-3) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libdebhelper-perl (13.3.4) ...
Setting up libfuture-perl (0.47-1) ...
Setting up libtest-pod-perl (1.52-1) ...
Setting up libtry-tiny-perl (0.30-1) ...
Setting up libmagic1:arm64 (1:5.39-3) ...
Setting up libtest-fatal-perl (0.016-1) ...
Setting up gettext-base (0.21-4) ...
Setting up file (1:5.39-3) ...
Setting up libsereal-encoder-perl (4.018+ds-1+b1) ...
Setting up libtest-identity-perl (0.01-2.1) ...
Setting up libmetrics-any-perl (0.06-1) ...
Setting up libmodule-build-perl (0.423100-1) ...
Setting up autotools-dev (20180224.1+nmu1) ...
Setting up libsigsegv2:arm64 (2.13-1) ...
Setting up autopoint (0.21-4) ...
Setting up libtest-refcount-perl (0.10-1) ...
Setting up sensible-utils (0.0.14) ...
Setting up libuchardet0:arm64 (0.0.7-1) ...
Setting up libsub-override-perl (0.09-2) ...
Setting up netbase (6.3) ...
Setting up libelf1:arm64 (0.183-1) ...
Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ...
Setting up libsereal-decoder-perl (4.018+ds-1+b1) ...
Setting up libfile-stripnondeterminism-perl (1.12.0-1) ...
Setting up gettext (0.21-4) ...
Setting up libtool (2.4.6-15) ...
Setting up m4 (1.4.18-5) ...
Setting up libsereal-perl (4.018-1) ...
Setting up libtest-metrics-any-perl (0.01-2) ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up autoconf (2.69-14) ...
Setting up dh-strip-nondeterminism (1.12.0-1) ...
Setting up dwz (0.13+20210201-1) ...
Setting up groff-base (1.22.4-6) ...
Setting up automake (1:1.16.3-2) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up po-debconf (1.0.21+nmu1) ...
Setting up man-db (2.9.4-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up dh-autoreconf (20) ...
Setting up debhelper (13.3.4) ...
Processing triggers for libc-bin (2.31-13) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
 -> Finished parsing the build-deps
I: Building the package
I: Running cd /build/libio-async-perl-0.78/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S  > ../libio-async-perl_0.78-1_source.changes
dpkg-buildpackage: info: source package libio-async-perl
dpkg-buildpackage: info: source version 0.78-1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by gregor herrmann <gregoa@debian.org>
 dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
 debian/rules clean
dh clean
   dh_clean
 debian/rules binary
dh binary
   dh_update_autotools_config
   dh_autoreconf
   dh_auto_configure
	perl Build.PL --installdirs vendor --config "optimize=-g -O2 -fdebug-prefix-map=/build/libio-async-perl-0.78=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libio-async-perl-0.78=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro"
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'IO-Async' version '0.78'
   dh_auto_build
	perl Build
Building IO-Async
   debian/rules override_dh_auto_test
make[1]: Entering directory '/build/libio-async-perl-0.78'
dh_auto_test -- --test_files="t/00use.t t/01timequeue.t t/02os.t t/03loop-magic.t t/04notifier.t t/05notifier-loop.t t/06notifier-mixin.t t/07notifier-future.t t/10loop-poll-io.t t/10loop-select-io.t t/11loop-poll-timer.t t/11loop-select-timer.t t/12loop-poll-signal.t t/12loop-select-signal.t t/13loop-poll-idle.t t/13loop-select-idle.t t/14loop-poll-process.t t/14loop-select-process.t t/15loop-poll-control.t t/15loop-select-control.t t/16loop-poll-metrics.t t/16loop-select-metrics.t t/18loop-poll-legacy.t t/18loop-select-legacy.t t/19loop-future.t t/19test.t t/20handle.t t/21stream-1read.t t/21stream-2write.t t/21stream-3split.t t/21stream-4encoding.t t/22timer-absolute.t t/22timer-countdown.t t/22timer-periodic.t t/23signal.t t/24listener.t t/25socket.t t/26pid.t t/27file.t t/28filestream.t t/30loop-fork.t t/31loop-spawnchild.t t/32loop-spawnchild-setup.t t/33process.t t/34process-handles.t t/35loop-openprocess.t t/36loop-runchild.t t/37loop-child-root.t t/38loop-thread.t t/39loop-runproccess.t t/40channel.t t/41routine.t t/42function.t t/51loop-connect.t t/52loop-listen.t t/53loop-extend.t t/60protocol.t t/61protocol-stream.t t/62protocol-linestream.t t/63handle-connect.t t/64handle-bind.t t/70future-io.t t/99pod.t"
	perl Build test --verbose 1 "--test_files=t/00use.t t/01timequeue.t t/02os.t t/03loop-magic.t t/04notifier.t t/05notifier-loop.t t/06notifier-mixin.t t/07notifier-future.t t/10loop-poll-io.t t/10loop-select-io.t t/11loop-poll-timer.t t/11loop-select-timer.t t/12loop-poll-signal.t t/12loop-select-signal.t t/13loop-poll-idle.t t/13loop-select-idle.t t/14loop-poll-process.t t/14loop-select-process.t t/15loop-poll-control.t t/15loop-select-control.t t/16loop-poll-metrics.t t/16loop-select-metrics.t t/18loop-poll-legacy.t t/18loop-select-legacy.t t/19loop-future.t t/19test.t t/20handle.t t/21stream-1read.t t/21stream-2write.t t/21stream-3split.t t/21stream-4encoding.t t/22timer-absolute.t t/22timer-countdown.t t/22timer-periodic.t t/23signal.t t/24listener.t t/25socket.t t/26pid.t t/27file.t t/28filestream.t t/30loop-fork.t t/31loop-spawnchild.t t/32loop-spawnchild-setup.t t/33process.t t/34process-handles.t t/35loop-openprocess.t t/36loop-runchild.t t/37loop-child-root.t t/38loop-thread.t t/39loop-runproccess.t t/40channel.t t/41routine.t t/42function.t t/51loop-connect.t t/52loop-listen.t t/53loop-extend.t t/60protocol.t t/61protocol-stream.t t/62protocol-linestream.t t/63handle-connect.t t/64handle-bind.t t/70future-io.t t/99pod.t"
t/00use.t .................... 
ok 1 - use IO::Async::Notifier;
ok 2 - use IO::Async::Handle;
ok 3 - use IO::Async::Stream;
ok 4 - use IO::Async::Timer;
ok 5 - use IO::Async::Timer::Absolute;
ok 6 - use IO::Async::Timer::Countdown;
ok 7 - use IO::Async::Timer::Periodic;
ok 8 - use IO::Async::Signal;
ok 9 - use IO::Async::Listener;
ok 10 - use IO::Async::Socket;
ok 11 - use IO::Async::File;
ok 12 - use IO::Async::FileStream;
ok 13 - use IO::Async::OS;
ok 14 - use IO::Async::Loop::Select;
ok 15 - use IO::Async::Loop::Poll;
ok 16 - use IO::Async::Test;
ok 17 - use IO::Async::Function;
ok 18 - use IO::Async::Resolver;
ok 19 - use IO::Async::Protocol;
ok 20 - use IO::Async::Protocol::Stream;
ok 21 - use IO::Async::Protocol::LineStream;
1..21
ok
t/01timequeue.t .............. 
ok 1 - $queue defined
ok 2 - '$queue isa IO::Async::Internals::TimeQueue' isa 'IO::Async::Internals::TimeQueue'
ok 3 - ->next_time when empty is undef
ok 4 - enqueue no time fails
ok 5 - enqueue no code fails
ok 6 - enqueue code not CODE ref fails
ok 7 - ->next_time after single enqueue
ok 8 - ->next_time after second enqueue
ok 9 - $fired after fire at time 700
ok 10 - $count after fire at time 700
ok 11 - ->next_time after fire at time 700
ok 12 - $count after fire at time 900
ok 13 - ->next_time after fire at time 900
ok 14 - $count after fire at time 1200
ok 15 - ->next_time after fire at time 1200
ok 16 - $fired after fire at time 1400
ok 17 - $count after fire at time 1400
ok 18 - ->next_time after fire at time 1400
ok 19 - ->next_time before cancel
ok 20 - ->next_time after cancel
ok 21 - $fired after fire at time 1501
ok 22 - $count after fire at time 1501
ok 23 - $fired after fire at time 1510
ok 24 - $count after fire at time 1510
ok 25
1..25
ok
t/02os.t ..................... 
ok 1 - 'IO::Async::OS->socket("inet")' isa 'IO::Socket::IP'
ok 2 - 'IO::Async::OS->socket("inet6")' isa 'IO::Socket::IP'
ok 3 - '$S1 isa IO::Socket' isa 'IO::Socket'
ok 4 - '$S2 isa IO::Socket' isa 'IO::Socket'
ok 5 - SO_TYPE of $S1 is SOCK_STREAM
ok 6 - SO_TYPE of $S2 is SOCK_STREAM
ok 7 - $S1 --writes-> $S2
ok 8 - $S2 --writes-> $S1
ok 9 - '$S1 isa IO::Socket' isa 'IO::Socket'
ok 10 - '$S2 isa IO::Socket' isa 'IO::Socket'
ok 11 - $S1->socktype is SOCK_DGRAM
ok 12 - $S2->socktype is SOCK_DGRAM
ok 13 - $S1 --writes-> $S2
ok 14 - $S2 --writes-> $S1
ok 15 - '$S1 isa IO::Socket' isa 'IO::Socket'
ok 16 - '$S2 isa IO::Socket' isa 'IO::Socket'
ok 17 - SO_TYPE of $S1 is SOCK_STREAM
ok 18 - SO_TYPE of $S2 is SOCK_STREAM
ok 19 - $S1 --writes-> $S2
ok 20 - $S2 --writes-> $S1
ok 21 - '$S1 isa IO::Socket' isa 'IO::Socket'
ok 22 - '$S2 isa IO::Socket' isa 'IO::Socket'
ok 23 - $S1->socktype is SOCK_DGRAM
ok 24 - $S2->socktype is SOCK_DGRAM
ok 25 - $S1 --writes-> $S2
ok 26 - $S2 --writes-> $S1
ok 27 - $Pwr --writes-> $Prd
ok 28 - $wrA --writes-> $rdA
ok 29 - $wrB --writes-> $rdB
ok 30 - signame2num
ok 31 - getfamilybyname "inet"
ok 32 - getfamilybyname AF_INET
ok 33 - getsocktypebyname "stream"
ok 34 - getsocktypebyname SOCK_STREAM
ok 35 - extract_addrinfo( ARRAY )
ok 36 - extract_addrinfo( HASH )
ok 37 - extract_addrinfo( HASH ) with inet, ip+port
ok 38 - extract_addrinfo( HASH ) with inet, port
ok 39 - extract_addrinfo( HASH ) with inet only
ok 40 - extract_addrinfo for inet complains about unrecognised key
ok 41 - make_addr_for_peer preserves AF_INET port
ok 42 - make_addr_for_peer rewrites INADDR_ANY to _LOCALHOST
ok 43 - make_addr_for_peer preserves AF_INET other host
ok 44 - extract_addrinfo( HASH ) with inet6, ip+port
ok 45 - make_addr_for_peer preserves AF_INET6 port
ok 46 - make_addr_for_peer rewrites IN6ADDR_ANY to _LOCALHOST
ok 47 - make_addr_for_peer preserves AF_INET6 other host
ok 48 - extract_addrinfo( HASH ) with unix, path
ok 49 - make_addr_for_peer preserves AF_UNIX path
ok 50 - extract_addrinfo on unrecognised family complains
1..50
ok
t/03loop-magic.t ............. 
ok 1 - 'Magic constructor in default mode' isa 'IO::Async::Loop::Poll'
ok 2 - IO::Async::Loop->new again yields same loop
ok 3 - 'Magic constructor obeys $ENV{IO_ASYNC_LOOP}' isa 't::StupidLoop'
ok 4 - 'Magic constructor obeys $IO::Async::Loop::LOOP' isa 't::StupidLoop'
ok 5 - 'Magic constructor expands unqualified package names' isa 'IO::Async::Loop::Select'
1..5
ok
t/04notifier.t ............... 
ok 1 - $notifier defined
ok 2 - '$notifier isa IO::Async::Notifier' isa 'IO::Async::Notifier'
ok 3 - $notifier has refcount 1 initially
ok 4 - $notifier->notifier_name
ok 5 - $notifier->configure no params succeeds
ok 6 - $notifier->configure an unknown parameter fails
ok 7 - $notifier->configure with configure_unknown succeeds
ok 8 - %other after configure_unknown
ok 9 - $notifier has refcount 1 after _capture_weakself
ok 10 - @args after invoking $mref
ok 11 - trampoline does not appear in _capture_weakself callstack
ok 12 - $notifier has refcount 1 after _replace_weakself
ok 13 - @args after invoking replacer $mref
ok 14 - '$outerself unchanged' isa 'OtherClass'
ok 15 - $notifier->_capture_weakself on unknown method name fails
ok 16 - $subn has refcount 1 after _capture_weakself on named method
ok 17 - @subargs after invoking $mref on named method
ok 18 - @subargs empty after TestNotifier::frobnicate replacement
ok 19 - @newargs after TestNotifier::frobnicate replacement
ok 20 - @subargs after ->invoke_event
ok 21 - return value from ->maybe_invoke_event
ok 22 - return value from ->maybe_invoke_event on missing event
ok 23 - ->make_event_cb returns a CODE reference
ok 24 - $subn has refcount 1 after ->make_event_cb
ok 25 - @subargs after ->make_event_cb->()
ok 26 - '->maybe_make_event_cb yields CODE ref' isa 'CODE'
ok 27 - ->maybe_make_event_cb on missing event yields undef
ok 28 - $subn has refcount 1 finally
ok 29 - $parent has refcount 1 initially
ok 30 - $child has refcount 1 initially
ok 31 - $child->parent is $parent
ok 32 - $parent->children
ok 33 - $parent has refcount 1 after add_child
ok 34 - $child has refcount 2 after add_child
ok 35 - Adding child again fails
ok 36 - $child has refcount 1 after remove_child
ok 37 - $parent->children now empty
ok 38 - Exception thrown from ->invoke_error with no handler
ok 39 - Exception not thrown from ->invoke_error with handler
ok 40 - $message to on_error
ok 41 - Exception not thrown from ->invoke_error on child
ok 42 - $message to parent on_error
1..42
ok
t/05notifier-loop.t .......... 
ok 1 - $loop has refcount 2 initially
ok 2 - $loop->notifiers empty
ok 3 - loop undef
ok 4 - $loop has refcount 2 adding Notifier
ok 5 - $notifier has refcount 2 after adding to Loop
ok 6 - loop $loop
ok 7 - $loop->notifiers contains new Notifier
ok 8 - _add_to_loop called
ok 9 - adding again produces error
ok 10 - $notifier->loop is undef
ok 11 - $loop->notifiers empty once more
ok 12 - _remove_from_loop called
ok 13 - $notifier has refcount 1 finally
ok 14 - $child has refcount 3 after add_child within loop
ok 15 - $parent->loop is $loop
ok 16 - $child->loop is $loop
ok 17 - $parent now in loop
ok 18 - $child now in loop
ok 19 - Directly removing a child from the loop fails
ok 20 - $parent->children after $loop->remove
ok 21 - $parent has refcount 1 after removal from loop
ok 22 - $child has refcount 2 after removal of parent from loop
ok 23 - $parent->loop is undef
ok 24 - $child->loop is undef
ok 25 - $parent no longer in loop
ok 26 - $child no longer in loop
ok 27 - Directly adding a child to the loop fails
ok 28 - $child->loop is $loop after remove/add parent
ok 29 - $parent now in loop
ok 30 - $child now in loop
ok 31 - $parent has refcount 1 finally
ok 32 - $child has refcount 1 finally
ok 33 - $loop->add increments notifiers count
ok 34 - $loop->remove decrements notifiers count
ok 35 - $loop has refcount 2 finally
1..35
ok
t/06notifier-mixin.t ......... 
ok 1 - $loop has refcount 2 initially
ok 2 - '$notifier isa SomeEventSource' isa 'SomeEventSource'
ok 3 - '$notifier isa IO::Async::Notifier' isa 'IO::Async::Notifier'
ok 4 - $loop has refcount 2 adding Notifier
ok 5 - $notifier has refcount 2 after adding to Loop
ok 6 - loop $loop
ok 7 - SomeEventSource::Async added to Loop
ok 8 - $notifier->loop is undef
ok 9 - SomeEventSource::Async removed from Loop
1..9
ok
t/07notifier-future.t ........ 
ok 1 - ->adopted_futures initially
ok 2 - $f has refcount 2 after ->adopt_future
ok 3 - $notifier still has refcount 1 after ->adopt_future
ok 4 - ->adopted_futures after adoption
ok 5 - $f has refcount 1 after $f->done
ok 6 - ->adopted_futures finally
ok 7 - $err after $f->fail
ok 8 - $name after $f->fail
ok 9 - @detail after $f->fail
ok 10 - $f has refcount 1 after $f->fail
ok 11 - $err not defined after ->else_done suppressed failure
1..11
ok
t/10loop-poll-io.t ........... 
ok 1 - '$loop' isa 'IO::Async::Loop::Poll'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - $loop has refcount 1 after watch_io on_read_ready
ok 5 - $readready still 0 before ->loop_once
ok 6 - $readready when idle
ok 7 - $readready after loop_once
ok 8 - $readready after ->unwatch_io/->watch_io
ok 9 - $loop has refcount 1 after watch_io on_write_ready
ok 10 - $writeready after loop_once
ok 11 - $readready before HUP
ok 12 - $readready after HUP
ok 13 - $readready before pipe HUP
ok 14 - $readready after pipe HUP
ok 15 - $hangup after socket close
ok 16 - $hangup after pipe close for writing
ok 17 - read/write_ready can cancel each other
ok 18 - write_ready on crosslinked handles can cancel each other
ok 19 - exceptional socket invokes on_read_ready
ok 20 - regular file is readready
ok 21 - regular file is writeready
ok 22 - $loop has refcount 1 finally
1..22
ok
t/10loop-select-io.t ......... 
ok 1 - '$loop' isa 'IO::Async::Loop::Select'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - $loop has refcount 1 after watch_io on_read_ready
ok 5 - $readready still 0 before ->loop_once
ok 6 - $readready when idle
ok 7 - $readready after loop_once
ok 8 - $readready after ->unwatch_io/->watch_io
ok 9 - $loop has refcount 1 after watch_io on_write_ready
ok 10 - $writeready after loop_once
ok 11 - $readready before HUP
ok 12 - $readready after HUP
ok 13 - $readready before pipe HUP
ok 14 - $readready after pipe HUP
ok 15 # skip Loop cannot watch_io for on_hangup
ok 16 # skip Loop cannot watch_io for on_hangup
ok 17 - read/write_ready can cancel each other
ok 18 - write_ready on crosslinked handles can cancel each other
ok 19 - exceptional socket invokes on_read_ready
ok 20 - regular file is readready
ok 21 - regular file is writeready
ok 22 - $loop has refcount 1 finally
1..22
ok
t/11loop-poll-timer.t ........ 
ok 1 - '$loop' isa 'IO::Async::Loop::Poll'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - $loop->time gives the current time
ok 5 - $loop has refcount 1 after watch_time
ok 6 - loop_once(5) while waiting for watch_time after took at least 1.5 seconds
ok 7 - loop_once(5) while waiting for watch_time after took no more than 2.5 seconds
ok 8 - loop_once(5) while waiting for watch_time at took at least 1.5 seconds
ok 9 - loop_once(5) while waiting for watch_time at took no more than 2.5 seconds
ok 10 - unwatched watch_time does not fire
ok 11 - loop_once while waiting for negative interval timer took at least 0 seconds
ok 12 - loop_once while waiting for negative interval timer took no more than 0.1 seconds
ok 13 - Other timers still fire after self-cancelling one
ok 14 # skip Unable to handle sub-second timers accurately
ok 15 # skip Unable to handle sub-second timers accurately
ok 16 # skip Unable to handle sub-second timers accurately
ok 17 - $loop has refcount 1 finally
1..17
ok
t/11loop-select-timer.t ...... 
ok 1 - '$loop' isa 'IO::Async::Loop::Select'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - $loop->time gives the current time
ok 5 - $loop has refcount 1 after watch_time
ok 6 - loop_once(5) while waiting for watch_time after took at least 1.5 seconds
ok 7 - loop_once(5) while waiting for watch_time after took no more than 2.5 seconds
ok 8 - loop_once(5) while waiting for watch_time at took at least 1.5 seconds
ok 9 - loop_once(5) while waiting for watch_time at took no more than 2.5 seconds
ok 10 - unwatched watch_time does not fire
ok 11 - loop_once while waiting for negative interval timer took at least 0 seconds
ok 12 - loop_once while waiting for negative interval timer took no more than 0.1 seconds
ok 13 - Other timers still fire after self-cancelling one
ok 14 # skip Unable to handle sub-second timers accurately
ok 15 # skip Unable to handle sub-second timers accurately
ok 16 # skip Unable to handle sub-second timers accurately
ok 17 - $loop has refcount 1 finally
1..17
ok
t/12loop-poll-signal.t ....... 
ok 1 - '$loop' isa 'IO::Async::Loop::Poll'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - $loop has refcount 1 after watch_signal
ok 5 - $caught idling
ok 6 - $caught before ->loop_once
ok 7 - $caught after ->loop_once
ok 8 - second raise is still deferred
ok 9 - $caught after second ->loop_once
ok 10 - $loop has refcount 1 before unwatch_signal
ok 11 - $loop has refcount 1 after unwatch_signal
ok 12 - $loop has refcount 1 after 2 * attach_signal
ok 13 - $cA after raise
ok 14 - $cB after raise
ok 15 - $cA after raise
ok 16 - $cB after raise
ok 17 - Bad signal name fails
ok 18 - $caught SIGTERM after ->post_fork
ok 19 - $loop has refcount 1 finally
1..19
ok
t/12loop-select-signal.t ..... 
ok 1 - '$loop' isa 'IO::Async::Loop::Select'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - $loop has refcount 1 after watch_signal
ok 5 - $caught idling
ok 6 - $caught before ->loop_once
ok 7 - $caught after ->loop_once
ok 8 - second raise is still deferred
ok 9 - $caught after second ->loop_once
ok 10 - $loop has refcount 1 before unwatch_signal
ok 11 - $loop has refcount 1 after unwatch_signal
ok 12 - $loop has refcount 1 after 2 * attach_signal
ok 13 - $cA after raise
ok 14 - $cB after raise
ok 15 - $cA after raise
ok 16 - $cB after raise
ok 17 - Bad signal name fails
ok 18 - $caught SIGTERM after ->post_fork
ok 19 - $loop has refcount 1 finally
1..19
ok
t/13loop-poll-idle.t ......... 
ok 1 - '$loop' isa 'IO::Async::Loop::Poll'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - idle watcher id is defined
ok 5 - deferred sub not yet invoked
ok 6 - loop_once(3) with deferred sub took no more than 1 seconds
ok 7 - deferred sub called after loop_once
ok 8 - inner deferral not yet invoked
ok 9 - inner deferral now invoked
ok 10 - loop_once(1) with unwatched deferral took at least 0.5 seconds
ok 11 - loop_once(1) with unwatched deferral took no more than 1.5 seconds
ok 12 - unwatched deferral not called
ok 13 - $loop->later still invoked with enqueued timer
ok 14 - $loop->later shortcut works
ok 15 - $loop has refcount 1 finally
1..15
ok
t/13loop-select-idle.t ....... 
ok 1 - '$loop' isa 'IO::Async::Loop::Select'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - idle watcher id is defined
ok 5 - deferred sub not yet invoked
ok 6 - loop_once(3) with deferred sub took no more than 1 seconds
ok 7 - deferred sub called after loop_once
ok 8 - inner deferral not yet invoked
ok 9 - inner deferral now invoked
ok 10 - loop_once(1) with unwatched deferral took at least 0.5 seconds
ok 11 - loop_once(1) with unwatched deferral took no more than 1.5 seconds
ok 12 - unwatched deferral not called
ok 13 - $loop->later still invoked with enqueued timer
ok 14 - $loop->later shortcut works
ok 15 - $loop has refcount 1 finally
1..15
ok
t/14loop-poll-process.t ...... 
ok 1 - '$loop' isa 'IO::Async::Loop::Poll'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - $loop has refcount 1 after watch_process
ok 5 - $exitcode not defined before ->loop_once
ok 6 - WIFEXITED($exitcode) after child exit
ok 7 - WEXITSTATUS($exitcode) after child exit
ok 8 - WTERMSIG($exitcode) after SIGTERM
ok 9 - Waiting for 3 child processes
ok 10 - All child processes reclaimed
ok 11 - $exitcode after child exit from legacy ->watch_child
ok 12 - $loop has refcount 1 finally
1..12
ok
t/14loop-select-process.t .... 
ok 1 - '$loop' isa 'IO::Async::Loop::Select'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - $loop has refcount 1 after watch_process
ok 5 - $exitcode not defined before ->loop_once
ok 6 - WIFEXITED($exitcode) after child exit
ok 7 - WEXITSTATUS($exitcode) after child exit
ok 8 - WTERMSIG($exitcode) after SIGTERM
ok 9 - Waiting for 3 child processes
ok 10 - All child processes reclaimed
ok 11 - $exitcode after child exit from legacy ->watch_child
ok 12 - $loop has refcount 1 finally
1..12
ok
t/15loop-poll-control.t ...... 
ok 1 - '$loop' isa 'IO::Async::Loop::Poll'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - loop_once(0) when idle took at least 0 seconds
ok 5 - loop_once(0) when idle took no more than 0.1 seconds
ok 6 - loop_once(2) when idle took at least 1.5 seconds
ok 7 - loop_once(2) when idle took no more than 2.5 seconds
ok 8 - ->stop arguments returned by ->run
ok 9 - First ->stop argument returned by ->run in scalar context
ok 10 - $loop->is_running
ok 11 - ->run can be nested properly
ok 12 - $loop->loop_forever interruptable by ->loop_stop
ok 13 - $loop has refcount 1 finally
1..13
ok
t/15loop-select-control.t .... 
ok 1 - '$loop' isa 'IO::Async::Loop::Select'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - loop_once(0) when idle took at least 0 seconds
ok 5 - loop_once(0) when idle took no more than 0.1 seconds
ok 6 - loop_once(2) when idle took at least 1.5 seconds
ok 7 - loop_once(2) when idle took no more than 2.5 seconds
ok 8 - ->stop arguments returned by ->run
ok 9 - First ->stop argument returned by ->run in scalar context
ok 10 - $loop->is_running
ok 11 - ->run can be nested properly
ok 12 - $loop->loop_forever interruptable by ->loop_stop
ok 13 - $loop has refcount 1 finally
1..13
ok
t/16loop-poll-metrics.t ...... 
ok 1 - '$loop' isa 'IO::Async::Loop::Poll'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - Constructing the loop creates a loop type metric
ok 5 - loop_once(0) creates timing metrics
ok 6 - $loop has refcount 1 finally
1..6
ok
t/16loop-select-metrics.t .... 
ok 1 - '$loop' isa 'IO::Async::Loop::Select'
ok 2 - magic constructor yields $loop
ok 3 - $loop has refcount 1
ok 4 - Constructing the loop creates a loop type metric
ok 5 - loop_once(0) creates timing metrics
ok 6 - $loop has refcount 1 finally
1..6
ok
t/18loop-poll-legacy.t ....... 
ok 1 - $poll->handles empty initially
ok 2 - $poll->handles after watch_io read_ready
ok 3 - $readready before post_poll
ok 4 - $readready after post_poll
ok 5 - $poll->handles empty after unwatch_io read_ready
ok 6 - $poll->handles after watch_io write_ready
ok 7 - $writeready before post_poll
ok 8 - $writeready after post_poll
ok 9 - $poll->handles empty after unwatch_io write_ready
ok 10 - $poll->handles before removal in clean removal test
ok 11 - $poll->handles after removal in clean removal test
1..11
ok
t/18loop-select-legacy.t ..... 
ok 1 - $rvec idling pre_select
ok 2 - $wvec idling pre_select
ok 3 - $evec idling pre_select
ok 4 - $timeout idling pre_select
ok 5 - $rvec readready pre_select
ok 6 - $wvec readready pre_select
ok 7 - $evec readready pre_select
ok 8 - $timeout readready pre_select
ok 9 - $readready readready pre_select
ok 10 - $readready readready post_select
ok 11 - $rvec writeready pre_select
ok 12 - $wvec writeready pre_select
ok 13 - $evec writeready pre_select
ok 14 - $timeout writeready pre_select
ok 15 - $writeready writeready pre_select
ok 16 - $writeready writeready post_select
ok 17 - $timeout idling pre_select with timeout
ok 18 - $timeout while timer waiting pre_select at least 1.7
ok 19 - $timeout while timer waiting pre_select at least 2.5
ok 20 - loop_once(5) while waiting for timer takes at least 1.7 seconds
ok 21 - loop_once(5) while waiting for timer no more than 10 seconds
ok 22 - $done after post_select while waiting for timer
ok 23 - $done still 0 before cancelled timeout
1..23
ok
t/19loop-future.t ............ 
ok 1 - $loop->await( $future ) returns $future
ok 2 - $future->get
ok 3 - $loop->later returns a pending Future
ok 4 - another $loop->later also returns a pending Future
ok 5 - $loop->later Future is resolved after one loop iteration
ok 6 - $loop->later Future cancels cleanly
ok 7 - $loop->await_all
ok 8 - future 0 ready
ok 9 - future 1 ready
ok 10 - future 2 ready
ok 11 - $future->loop yields $loop
ok 12 - $future->get on IO::Async::Future
ok 13 - $future->get on IO::Async::Future from $loop->new_future
ok 14 - ->done_later returns $future
ok 15 - $future not yet ready after ->done_later
ok 16 - $future now ready after ->get
ok 17 - ->fail_later returns $future
ok 18 - $future not yet ready after ->fail_later
ok 19 - $future now ready after $loop->await
ok 20 - ->delay_future is ready took at least 0.75
ok 21 - ->delay_future is ready took no more than 2.5
ok 22 - $future is ready from delay_future
ok 23 - $future->get returns empty list on delay_future
ok 24 - ->timeout_future is ready took at least 0.75
ok 25 - ->timeout_future is ready took no more than 2.5
ok 26 - $future is ready from timeout_future
ok 27 - $future failed with "Timeout" for timeout_future
1..27
ok
t/19test.t ................... 
ok 1 - $loop has refcount 2 initially
ok 2 - $loop has refcount 3 after adding to IO::Async::Test
ok 3 - Single-wait
ok 4 - Automatic stream read wait
ok 5
1..5
ok
t/20handle.t ................. 
ok 1 - Not a filehandle
ok 2 - $handle defined
ok 3 - '$handle isa IO::Async::Handle' isa 'IO::Async::Handle'
ok 4 - $handle->notifier_name for read_handle
ok 5 - $handle has refcount 1 initially
ok 6 - ->read_handle returns S1
ok 7 - ->read_fileno returns fileno(S1)
ok 8 - ->write_handle returns undef
ok 9 - want_readready true
ok 10 - $handle has refcount 2 after adding to Loop
ok 11 - $readready while idle
ok 12 - $readready while readable
ok 13 - on_read_ready args while readable
ok 14 - $readready while idle after on_read_ready replace
ok 15 - $new_readready while idle after on_read_ready replace
ok 16 - $readready while readable after on_read_ready replace
ok 17 - $new_readready while readable after on_read_ready replace
ok 18 - setting want_writeready with write_handle == undef dies
ok 19 - wantwriteready write_handle == undef false
ok 20 - $handle has refcount 2 before removing from Loop
ok 21 - $handle has refcount 1 finally
ok 22 - $handle defined
ok 23 - '$handle isa IO::Async::Handle' isa 'IO::Async::Handle'
ok 24 - $handle->notifier_name for write_handle
ok 25 - $handle has refcount 1 initially
ok 26 - ->write_handle returns S1
ok 27 - ->write_fileno returns fileno(S1)
ok 28 - ->read_handle returns undef
ok 29 - want_writeready false
ok 30 - $handle has refcount 2 after adding to Loop
ok 31 - $writeready while idle
ok 32 - $writeready while writeable
ok 33 - on_write_ready args while writeable
ok 34 - $writeready while writeable after on_write_ready replace
ok 35 - $new_writeready while writeable after on_write_ready replace
ok 36 - $handle has refcount 2 before removing from Loop
ok 37 - $handle has refcount 1 finally
ok 38 - ->read_handle returns S1
ok 39 - ->write_handle returns S1
ok 40 - $handle->notifier_name for handle
ok 41 - subclass $handle defined
ok 42 - 'subclass $handle isa IO::Async::Handle' isa 'IO::Async::Handle'
ok 43 - subclass $handle has refcount 1 initially
ok 44 - subclass ->read_handle returns S1
ok 45 - subclass ->write_handle returns S1
ok 46 - subclass $handle has refcount 2 after adding to Loop
ok 47 - $sub_readready while readable
ok 48 - $sub_writeready while readable
ok 49 - $sub_readready while writeable
ok 50 - $sub_writeready while writeable
ok 51 - $closed after ->close
ok 52 - $close_future is now ready
ok 53 - $closed_by_future after ->close
ok 54 - $writeready after ->close_read
ok 55 - write handle still works
ok 56 - not $closed after ->close_read
ok 57 - Handle still member of Loop after ->close_read
ok 58 - $readready after ->close_write
ok 59 - read handle still works
ok 60 - sysread from EOF write handle
ok 61 - Handle still member of Loop after ->close_write
ok 62 - not $closed after ->close_read
ok 63 - $closed after ->close_read + ->close_write
ok 64 - $handle no longer member of Loop
ok 65 - $handle defined
ok 66 - ->read_handle not defined
ok 67 - ->write_handle not defined
ok 68 - $handle latebound has refcount 1 initially
ok 69 - $handle->notifier_name for late bind before handles
ok 70 - $handle latebound has refcount 2 after $loop->add
ok 71 - ->read_handle now S1
ok 72 - ->write_handle now S1
ok 73 - $handle latebound still has refcount 2 after set_handle
ok 74 - $handle->notifier_name for late bind after handles
ok 75 - $handle latebound still invokes on_read_ready
ok 76 - ->socket sets handle
ok 77 - handle->sockdomain is AF_INET
ok 78 - handle->socktype is SOCK_STREAM
ok 79 - handle->socktype is SOCK_DGRAM
ok 80 - handle->sockname has nonzero port
ok 81 - ->new with read_fileno creates read_handle
ok 82 - ->fileno of read_handle
ok 83 - ->new with write_fileno creates write_handle
ok 84 - ->fileno of write_handle
ok 85 - ->new with equal read and write fileno only creates one handle
1..85
ok
t/21stream-1read.t ........... 
ok 1 - reading $stream defined
ok 2 - 'reading $stream isa IO::Async::Stream' isa 'IO::Async::Stream'
ok 3 - reading $stream has refcount 1 initially
ok 4 - reading $stream has refcount 2 after adding to Loop
ok 5 - @lines before wait
ok 6 - @lines after wait
ok 7 - @lines partial still empty
ok 8 - @lines partial completed now received
ok 9 - @lines two at once
ok 10 - @lines still empty after on_read replace
ok 11 - @new_lines after on_read replace
ok 12 - reading $stream has refcount 2 before removing from Loop
ok 13 - reading $stream refcount 1 finally
ok 14 - @lines from stream with abstract reader
ok 15 - writer not yet called before ->want_readready_for_write
ok 16 - writer now invoked with ->want_readready_for_write
ok 17 - @lines with read_len=2 without read_all
ok 18 - @lines finally with read_len=2 without read_all
ok 19 - @lines with read_len=2 with read_all
ok 20 - Allowed to construct a Stream without an on_read handler
ok 21 - Not allowed to add an on_read-less Stream to a Loop
ok 22 - reading subclass $stream defined
ok 23 - 'reading $stream isa IO::Async::Stream' isa 'IO::Async::Stream'
ok 24 - subclass $stream has refcount 1 initially
ok 25 - subclass $stream has refcount 2 after adding to Loop
ok 26 - @sub_lines before wait
ok 27 - @sub_lines after wait
ok 28 - dynamic reading $stream has refcount 1 initially
ok 29 - $outer_count after idle
ok 30 - $inner_count after idle
ok 31 - $outer_count after received length
ok 32 - $inner_count after received length
ok 33 - $outer_count after partial body
ok 34 - $inner_count after partial body
ok 35 - $outer_count after complete body
ok 36 - $inner_count after complete body
ok 37 - $record after complete body
ok 38 - dynamic reading $stream has refcount 1 finally
ok 39 - $firstline from ->push_on_read CODE
ok 40 - $eightbytes from ->push_on_read CODE
ok 41 - $base from ->push_on_read CODE
ok 42 - $stream ->is_read_eof before wait
ok 43 - EOF indication before wait
ok 44 - $stream ->is_read_eof after wait
ok 45 - EOF indication after wait
ok 46 - EOF stream retains partial input
ok 47 - EOF stream no longer member of Loop
ok 48 - Stream no longer has a read_handle
ok 49 - EOF indication before wait
ok 50 - EOF indication after wait
ok 51 - EOF stream retains partial input
ok 52 - EOF stream still member of Loop
ok 53 - Stream still has a read_handle
ok 54 - closing $stream has refcount 1 initially
ok 55 - closing $stream has refcount 2 after adding to Loop
ok 56 - closed before close
ok 57 - closed after close
ok 58 - loop during closed
ok 59 - Stream no longer member of Loop
ok 60 - closing $stream refcount 1 finally
ok 61 - ->read_atmost
ok 62 - ->read_exactly
ok 63 - ->read_until regexp
ok 64 - ->read_until str
ok 65 - Second ->read_until recieves data after first is ->cancelled
ok 66 - ->read_until_eof
ok 67 - chained ->read_exactly
ok 68 - Reading too much hits high watermark
ok 69 - Stream->read_exactly yields bytes
ok 70 - Low watermark hit after ->read
ok 71 - errno after failed read
ok 72 - failure from ->read_atmost after failed read
ok 73 - Stream->new_for_stdin->read_handle is STDIN
ok 74 - Stream reading increments metric
1..74
ok
t/21stream-2write.t .......... 
ok 1 - writing $stream defined
ok 2 - 'writing $stream isa IO::Async::Stream' isa 'IO::Async::Stream'
ok 3 - writing $stream has refcount 1 initially
ok 4 - writing $stream has refcount 2 after adding to Loop
ok 5 - want_writeready before write
ok 6 - want_writeready after write
ok 7 - want_writeready after wait
ok 8 - $empty after writing buffer
ok 9 - data after writing buffer
ok 10 - ->write future not yet ready
ok 11 - on_write $_[0] is $stream
ok 12 - on_flush $_[0] is $stream
ok 13 - ->write future is ready after flush
ok 14 - on_write given total write length after flush
ok 15 - flushed data does get flushed
ok 16 - write empty data with on_flush
ok 17 - not want_writeready after autoflush write
ok 18 - data after autoflush write
ok 19 - not want_writeready after split autoflush write
ok 20 - data after split autoflush write
ok 21 - writing $stream has refcount 2 before removing from Loop
ok 22 - writing $stream refcount 1 finally
ok 23 - $buffer after ->write to stream with abstract writer
ok 24 - reader not yet called before ->want_writeready_for_read
ok 25 - reader now invoked with ->want_writeready_for_read
ok 26 - $buffer after emulated EAGAIN
ok 27 - data after writing buffer with write_len=2 without write_all
ok 28 - data finally after writing buffer with write_len=2 without write_all
ok 29 - data after writing buffer with write_len=2 with write_all
ok 30 - $stream->is_write_eof before wait
ok 31 - EOF indication before wait
ok 32 - $stream->is_write_eof after wait
ok 33 - EOF indication after wait
ok 34 - EOF stream no longer member of Loop
ok 35 - write future ready after stream closed
ok 36 - write future failed after stream closed
ok 37 - closing $stream has refcount 1 initially
ok 38 - closing $stream has refcount 2 after adding to Loop
ok 39 - closed before close
ok 40 - closed after close
ok 41 - closed after wait
ok 42 - loop during closed
ok 43 - Stream no longer member of Loop
ok 44 - closing $stream refcount 1 finally
ok 45 - stream idle before Future completes
ok 46 - stream written by Future completion invokes on_write
ok 47 - stream written by Future completion
ok 48 - Writersub $_[0] is $stream
ok 49 - Writersub $_[0] is $stream
ok 50 - stream written by generator CODE invokes on_write
ok 51 - lazy data was written
ok 52 - multiple lazy data was written
ok 53 - multiple lazy data was written
ok 54 - prequeued data gets flushed
ok 55 - prequeued data gets written
ok 56 - errno after failed write
ok 57 - write future ready after failed write
ok 58 - write future failed after failed write
ok 59 - Stream->new_for_stdout->write_handle is STDOUT
ok 60 - Stream reading increments metric
1..60
ok
t/21stream-3split.t .......... 
ok 1 - split read/write $stream has refcount 1 initially
ok 2 - split read/write $stream has refcount 2 after adding to Loop
ok 3 - $S4 receives data from split stream
ok 4 - $S1 empty from split stream
ok 5 - @lines on response to split stream
ok 6 - split read/write $stream has refcount 2 before removing from Loop
ok 7 - split read/write $stream refcount 1 finally
ok 8 - latehandle $stream has refcount 1 initially
ok 9 - latehandle $stream has refcount 2 after adding to Loop
ok 10 - ->write on stream with no IO handle fails
ok 11 - latehandle $stream has refcount 2 after setting a handle
ok 12 - stream-written text appears
ok 13 - stream-read text appears
ok 14 - closed after close
ok 15 - Stream no longer member of Loop
ok 16 - latehandle $stream refcount 1 finally
ok 17 - stream-written text appears after reopen
ok 18 - $stream has two references
ok 19 - read+write-ready closed Stream doesn't die
ok 20 - Stream->new_for_stdio->read_handle is STDIN
ok 21 - Stream->new_for_stdio->write_handle is STDOUT
1..21
ok
t/21stream-4encoding.t ....... 
ok 1 - Unicode characters read by on_read
ok 2 - Partial UTF-8 character not yet visible
ok 3 - Partial UTF-8 character visible after completion
ok 4 - Invalid UTF-8 byte yields U+FFFD
ok 5 - UTF-8 bytes written by ->write string
ok 6 - First UTF-8 byte written with write_len 1
ok 7 - Remaining UTF-8 byte written with write_len 1
ok 8 - UTF-8 bytes written by ->write Future
ok 9 - UTF-8 bytes written by ->write CODE
1..9
ok
t/22timer-absolute.t ......... 
ok 1 - $timer defined
ok 2 - '$timer isa IO::Async::Timer' isa 'IO::Async::Timer'
ok 3 - $timer has refcount 1 initially
ok 4 - $timer has refcount 2 after adding to Loop
ok 5 - Started Timer is running
ok 6 - Timer works took at least 1.5
ok 7 - Timer works took no more than 4
ok 8 - on_expire args
ok 9 - Expired Timer is no longer running
ok 10 - $timer has refcount 2 before removing from Loop
ok 11 - $timer has refcount 1 after removing from Loop
ok 12 - Removed Timer does not expire
ok 13 - Reconfigured timer works took at least 0.75
ok 14 - Reconfigured timer works took no more than 2.5
ok 15 - Reconfigured timer on_expire works took at least 0.75
ok 16 - Reconfigured timer on_expire works took no more than 2.5
ok 17 - subclass $timer defined
ok 18 - 'subclass $timer isa IO::Async::Timer' isa 'IO::Async::Timer'
ok 19 - subclass $timer has refcount 1 initially
ok 20 - subclass $timer has refcount 2 after adding to Loop
ok 21 - Started subclass Timer is running
ok 22 - subclass Timer works took at least 1.5
ok 23 - subclass Timer works took no more than 4
ok 24 - Expired subclass Timer is no longer running
ok 25 - subclass $timer has refcount 2 before removing from Loop
ok 26 - subclass $timer has refcount 1 after removing from Loop
1..26
ok
t/22timer-countdown.t ........ 
ok 1 - $timer defined
ok 2 - '$timer isa IO::Async::Timer' isa 'IO::Async::Timer'
ok 3 - $timer has refcount 1 initially
ok 4 - $timer has refcount 2 after adding to Loop
ok 5 - New Timer is no yet running
ok 6 - New Timer is no yet expired
ok 7 - $timer->start returns $timer
ok 8 - $timer has refcount 2 after starting
ok 9 - Started Timer is running
ok 10 - Started Timer not yet expired
ok 11 - Timer works took at least 1.5
ok 12 - Timer works took no more than 4
ok 13 - on_expire args
ok 14 - Expired Timer is no longer running
ok 15 - Expired Timer now expired
ok 16 - $timer has refcount 2 before removing from Loop
ok 17 - $timer has refcount 1 after removing from Loop
ok 18 - $timer->start out of a Loop returns $timer
ok 19 - Re-started Timer is running
ok 20 - Re-started Timer not yet expired
ok 21 - Timer works a second time took at least 1.5
ok 22 - Timer works a second time took no more than 4
ok 23 - 2nd-time expired Timer is no longer running
ok 24 - 2nd-time expired Timer now expired
ok 25 - Timer can be stopped a second time
ok 26 - Stopped timer doesn't expire
ok 27 - Reset Timer hasn't expired yet
ok 28 - Timer has now expired took at least 1.5
ok 29 - Timer has now expired took no more than 2.5
ok 30 - Timer has refcount 1 finally
ok 31 - Removed Timer does not expire
ok 32 - Pre-started Timer is running after adding
ok 33 - Pre-started Timer works took at least 1.5
ok 34 - Pre-started Timer works took no more than 4
ok 35 - start/stopped Timer doesn't expire
ok 36 - Reconfigured timer delay works took at least 0.75
ok 37 - Reconfigured timer delay works took no more than 2.5
ok 38 - Reconfigured timer on_expire works took at least 0.75
ok 39 - Reconfigured timer on_expire works took no more than 2.5
ok 40 - Configure a running timer fails
ok 41 - remove_on_expire Timer took at least 0.75
ok 42 - remove_on_expire Timer took no more than 2.5
ok 43 - remove_on_expire Timer removed from Loop after expire
ok 44 - subclass $timer defined
ok 45 - 'subclass $timer isa IO::Async::Timer' isa 'IO::Async::Timer'
ok 46 - subclass $timer has refcount 1 initially
ok 47 - subclass $timer has refcount 2 after adding to Loop
ok 48 - subclass $timer has refcount 2 after starting
ok 49 - Started subclass Timer is running
ok 50 - subclass Timer works took at least 1.5
ok 51 - subclass Timer works took no more than 4
ok 52 - Expired subclass Timer is no longer running
ok 53 - subclass $timer has refcount 2 before removing from Loop
ok 54 - subclass $timer has refcount 1 after removing from Loop
1..54
ok
t/22timer-periodic.t ......... 
ok 1 - $timer defined
ok 2 - '$timer isa IO::Async::Timer' isa 'IO::Async::Timer'
ok 3 - $timer has refcount 1 initially
ok 4 - $timer has refcount 2 after adding to Loop
ok 5 - $timer->start returns $timer
ok 6 - $timer has refcount 2 after starting
ok 7 - Started Timer is running
ok 8 - Timer works took at least 1.5
ok 9 - Timer works took no more than 4
ok 10 - on_tick args
ok 11 - Timer is still running
ok 12 - Timer works a second time took at least 1.5
ok 13 - Timer works a second time took no more than 4
ok 14 - Timer can be stopped a second time
ok 15 - Stopped timer doesn't tick
ok 16 - $timer has refcount 2 before removing from Loop
ok 17 - $timer has refcount 1 after removing from Loop
ok 18 - Removed timer not running
ok 19 - Reconfigured timer interval works took at least 0.75
ok 20 - Reconfigured timer interval works took no more than 2.5
ok 21 - Zero first_interval start not invoked yet
ok 22 - Zero first_interval invokes callback async took at least 0
ok 23 - Zero first_interval invokes callback async took no more than 1
ok 24 - Normal interval used after first invocation took at least 1.5
ok 25 - Normal interval used after first invocation took no more than 4
ok 26 - Configure a running timer fails
ok 27 - Timer has refcount 1 finally
ok 28 - skip Timer works took at least 0.75
ok 29 - skip Timer works took no more than 2.5
ok 30 - skip Timer is still running
ok 31 - skip Timer ticks a second time took at least 0.75
ok 32 - skip Timer ticks a second time took no more than 2.5
ok 33 - drift Timer works took at least 0.75
ok 34 - drift Timer works took no more than 2.5
ok 35 - drift Timer is still running
ok 36 - drift Timer ticks a second time took at least 0.75
ok 37 - drift Timer ticks a second time took no more than 2.5
ok 38 - Self-stopping timer can stop itself
ok 39 - on_tick death throws exception
ok 40 - on_tick death rescheduled and runs a second time
ok 41 - subclass $timer defined
ok 42 - 'subclass $timer isa IO::Async::Timer' isa 'IO::Async::Timer'
ok 43 - subclass $timer has refcount 1 initially
ok 44 - subclass $timer has refcount 2 after adding to Loop
ok 45 - subclass $timer has refcount 2 after starting
ok 46 - Started subclass Timer is running
ok 47 - subclass Timer works took at least 1.5
ok 48 - subclass Timer works took no more than 4
ok 49 - subclass $timer has refcount 2 before removing from Loop
ok 50 - subclass $timer has refcount 1 after removing from Loop
1..50
ok
t/23signal.t ................. 
ok 1 - $signal defined
ok 2 - '$signal isa IO::Async::Signal' isa 'IO::Async::Signal'
ok 3 - $signal has refcount 1 initially
ok 4 - $signal->notifier_name
ok 5 - $signal has refcount 2 after adding to Loop
ok 6 - $caught idling
ok 7 - $caught after raise
ok 8 - on_receipt args after raise
ok 9 - $caught after raise
ok 10 - $caught2 after raise
ok 11 - $caught after raise
ok 12 - $caught2 after raise
ok 13 - $caught after raise after replace on_receipt
ok 14 - $new_caught after raise after replace on_receipt
ok 15 - $signal has refcount 2 before removing from Loop
ok 16 - $signal has refcount 1 finally
ok 17 - subclass $signal defined
ok 18 - 'subclass $signal isa IO::Async::Signal' isa 'IO::Async::Signal'
ok 19 - subclass $signal has refcount 1 initially
ok 20 - subclass $signal has refcount 2 after adding to Loop
ok 21 - $sub_caught idling
ok 22 - $sub_caught after raise
ok 23 - Bad signal name fails
1..23
ok
t/24listener.t ............... 
ok 1 - defined $listener
ok 2 - '$listener isa IO::Async::Listener' isa 'IO::Async::Listener'
ok 3 - '$listener isa IO::Async::Notifier' isa 'IO::Async::Notifier'
ok 4 - $listener has refcount 1 initially
ok 5 - $listener is_listening
ok 6 - $listener->sockname
ok 7 - $listener->family
ok 8 - $listener->sockname
ok 9 - $listener has refcount 2 after adding to Loop
ok 10 - $clientsock is connected
ok 11 - $newclient peer is correct
ok 12 - $listener has refcount 2 before removing from Loop
ok 13 - $listener has refcount 1 after removing from Loop
ok 14 - '$accepted with handle_constructor' isa 'IO::Async::Stream'
ok 15 - '$accepted with handle_constructor' isa 'IO::Async::Stream'
ok 16 - 'on_stream $newstream isa IO::Async::Stream' isa 'IO::Async::Stream'
ok 17 - $newstream sock peer is correct
ok 18 - 'on_socket $newsocket isa IO::Async::Socket' isa 'IO::Async::Socket'
ok 19 - $newsocket sock peer is correct
ok 20 - $listener has no read handle any more
ok 21 - subclass defined $listener
ok 22 - 'subclass $listener isa IO::Async::Listener' isa 'IO::Async::Listener'
ok 23 - subclass $listener has refcount 1 initially
ok 24 - subclass $listener has refcount 2 after adding to Loop
ok 25 - subclass $clientsock is connected
ok 26 - $sub_newclient peer is correct
ok 27 - subclass $listener has refcount 2 before removing from Loop
ok 28 - subclass $listener has refcount 1 after removing from Loop
ok 29 - '$accepted with handle_constructor method' isa 'IO::Async::Stream'
ok 30 - $listener is_listening not yet
ok 31 - $listener is_listening
ok 32 - defined $sockname
ok 33 - socket listens on some defined port number
ok 34 - socket listens on INADDR_ANY
ok 35 - $listener->family
ok 36 - $listener->sockname
ok 37 - $listen_self is $listener
ok 38 - $clientsock is connected
ok 39 - $newclient peer is correct
1..39
ok
t/25socket.t ................. 
ok 1 - Send-only Socket works
ok 2 - recving $socket defined
ok 3 - 'recving $socket isa IO::Async::Socket' isa 'IO::Async::Socket'
ok 4 - recving $socket has refcount 1 initially
ok 5 - recving $socket has refcount 2 after adding to Loop
ok 6 - @received before wait
ok 7 - @received after wait
ok 8 - @received still empty after on_recv replace
ok 9 - @new_received after on_recv replace
ok 10 - receiving $socket has refcount 2 before removing from Loop
ok 11 - receiving $socket refcount 1 finally
ok 12 - @frags with recv_len=4 without recv_all
ok 13 - @frags finally with recv_len=4 without recv_all
ok 14 - @frags with recv_len=4 with recv_all
ok 15 - Allowed to construct a Socket without an on_recv handler
ok 16 - Not allowed to add an on_recv-less Socket to a Loop
ok 17 - receiving subclass $socket defined
ok 18 - 'receiving $socket isa IO::Async::Socket' isa 'IO::Async::Socket'
ok 19 - subclass $socket has refcount 1 initially
ok 20 - subclass $socket has refcount 2 after adding to Loop
ok 21 - @sub_received before wait
ok 22 - @sub_received after wait
ok 23 - sending $socket defined
ok 24 - 'sending $socket isa IO::Async::Socket' isa 'IO::Async::Socket'
ok 25 - sending $socket has refcount 1 intially
ok 26 - sending $socket has refcount 2 after adding to Loop
ok 27 - want_writeready before send
ok 28 - want_writeready after send
ok 29 - want_writeready after wait
ok 30 - $empty after writing buffer
ok 31 - data after writing buffer
ok 32 - not want_writeready after autoflush send
ok 33 - data after autoflush send
ok 34 - not want_writeready after split autoflush send
ok 35 - data[0] after split autoflush send
ok 36 - data[1] after split autoflush send
ok 37 - sending $socket has refcount 2 before removing from Loop
ok 38 - sending $socket has refcount 1 finally
ok 39 - errno after failed recv
ok 40 - errno after failed send
1..40
ok
t/26pid.t .................... 
ok 1 - $pid defined
ok 2 - '$pid isa IO::Async::PID' isa 'IO::Async::PID'
ok 3 - $pid has refcount 1 initially
ok 4 - $pid->pid
ok 5 - $pid->notifier_name
ok 6 - $pid has refcount 2 after adding to Loop
ok 7 - WIFEXITED($exitcode) after process exit
ok 8 - WEXITSTATUS($exitcode) after process exit
ok 9 - WTERMSIG($exitcode) after SIGTERM
1..9
ok
t/27file.t ................... 
ok 1 - $file defined
ok 2 - '$file isa IO::Async::File' isa 'IO::Async::File'
ok 3 - $file has refcount 1 initially
ok 4 - $file->handle is $rd
ok 5 - $file has refcount 2 after adding to Loop
ok 6 - $old_size
ok 7 - $new_size
ok 8 - '$old_stat isa File::stat' isa 'File::stat'
ok 9 - '$new_stat isa File::stat' isa 'File::stat'
ok 10 - $file has a ->handle
ok 11 - $new_stat->dev for renamed file
ok 12 - $new_stat->ino for renamed file
1..12
ok
t/28filestream.t ............. 
ok 1 - $filestream defined
ok 2 - '$filestream isa IO::Async::FileStream' isa 'IO::Async::FileStream'
ok 3 - reading $filestream has refcount 1 initially
ok 4 - $filestream has refcount 2 after adding to Loop
ok 5 - $initial_size is 0
ok 6 - @lines before wait
ok 7 - @lines after wait
ok 8 - $initial_size is 21
ok 9 - All content is visible
ok 10 - FileStream successfully seeks to last \n
ok 11 - Partial line completely returned
ok 12 - Initial content is skipped
ok 13 - File content truncation detected
ok 14 - All three lines read
ok 15 - $filestream defined for filenaem
ok 16 - '$filestream isa IO::Async::FileStream' isa 'IO::Async::FileStream'
ok 17 - reading $filestream has refcount 1 initially
ok 18 - $filestream has refcount 2 after adding to Loop
ok 19 - @lines after wait
ok 20 - @lines sees last line of old file
ok 21 - @lines sees first line of new file
ok 22 - subclass $filestream defined
ok 23 - '$filestream isa IO::Async::FileStream' isa 'IO::Async::FileStream'
ok 24 - subclass $filestream has refcount 1 initially
ok 25 - subclass $filestream has refcount 2 after adding to Loop
ok 26 - @sub_lines before wait
ok 27 - @sub_lines after wait
1..27
ok
t/30loop-fork.t .............. 
ok 1 - WIFEXITED($exitcode) after child exit
ok 2 - WEXITSTATUS($exitcode) after child exit
ok 3 - WIFEXITED($exitcode) after child die
ok 4 - WEXITSTATUS($exitcode) after child die
ok 5 - WTERMSIG($exitcode) after child SIGINT
ok 6 - WIFEXITED($exitcode) after child SIGINT with keep_signals
ok 7 - WEXITSTATUS($exitcode) after child SIGINT with keep_signals
ok 8 - IO::Async::Loop->new inside forked process code gets new loop instance
ok 9 - $loop->fork increments fork counter
1..9
ok
t/31loop-spawnchild.t ........ 
ok 1 - Bad option to spawn fails
ok 2 - Both code and command options to spawn fails
ok 3 - Bad option to spawn fails
ok 4 - $exited_pid == $spawned_pid after spawn CODE
ok 5 - WIFEXITED($exitcode) after spawn CODE
ok 6 - WEXITSTATUS($exitcode) after spawn CODE
ok 7 - $dollarat after spawn CODE
ok 8 - $exited_pid == $spawned_pid after spawn CODE with END
ok 9 - WIFEXITED($exitcode) after spawn CODE with END
ok 10 - WEXITSTATUS($exitcode) after spawn CODE with END
ok 11 - $dollarat after spawn CODE with END
ok 12 - $exited_pid == $spawned_pid after spawn CODE with die with END
ok 13 - WIFEXITED($exitcode) after spawn CODE with die with END
ok 14 - WEXITSTATUS($exitcode) after spawn CODE with die with END
ok 15 - $dollarat after spawn CODE with die with END
ok 16 - $exited_pid == $spawned_pid after spawn /bin/true
ok 17 - WIFEXITED($exitcode) after spawn /bin/true
ok 18 - WEXITSTATUS($exitcode) after spawn /bin/true
ok 19 - $dollarbang after spawn /bin/true
ok 20 - $dollarat after spawn /bin/true
ok 21 - $exited_pid == $spawned_pid after spawn donotexist
ok 22 - WIFEXITED($exitcode) after spawn donotexist
ok 23 - WEXITSTATUS($exitcode) after spawn donotexist
ok 24 - $dollarbang numerically after spawn donotexist
ok 25 - $dollarbang string after spawn donotexist
ok 26 - $dollarat after spawn donotexist
ok 27 - $exited_pid == $spawned_pid after spawn ARRAY
ok 28 - WIFEXITED($exitcode) after spawn ARRAY
ok 29 - WEXITSTATUS($exitcode) after spawn ARRAY
ok 30 - $dollarbang after spawn ARRAY
ok 31 - $dollarat after spawn ARRAY
ok 32 - $exited_pid == $spawned_pid after pipe close test
ok 33 - WIFEXITED($exitcode) after pipe close test
ok 34 - WEXITSTATUS($exitcode) after pipe close test
ok 35 - $dollarbang numerically after pipe close test
ok 36 - $dollarat after pipe close test
1..36
ok
t/32loop-spawnchild-setup.t .. 
ok 1 - Bad setup type fails
ok 2 - Setup with bad key fails
ok 3 - WIFEXITED($exitcode) after pipe dup to fd1
ok 4 - WEXITSTATUS($exitcode) after pipe dup to fd1
ok 5 - $dollarat after pipe dup to fd1
ok 6 - $pipe_r->read after pipe dup to fd1
ok 7 - $buffer after pipe dup to fd1
ok 8 - WIFEXITED($exitcode) after pipe dup to fd1 closes pipe
ok 9 - WEXITSTATUS($exitcode) after pipe dup to fd1 closes pipe
ok 10 - $dollarat after pipe dup to fd1 closes pipe
ok 11 - WIFEXITED($exitcode) after pipe dup to stdout shortcut
ok 12 - WEXITSTATUS($exitcode) after pipe dup to stdout shortcut
ok 13 - $dollarat after pipe dup to stdout shortcut
ok 14 - $pipe_r->read after pipe dup to stdout shortcut
ok 15 - $buffer after pipe dup to stdout shortcut
ok 16 - WIFEXITED($exitcode) after pipe dup to \*STDOUT IO reference
ok 17 - WEXITSTATUS($exitcode) after pipe dup to \*STDOUT IO reference
ok 18 - $dollarat after pipe dup to \*STDOUT IO reference
ok 19 - $pipe_r->read after pipe dup to \*STDOUT IO reference
ok 20 - $buffer after pipe dup to \*STDOUT IO reference
ok 21 - WIFEXITED($exitcode) after pipe keep open
ok 22 - WEXITSTATUS($exitcode) after pipe keep open
ok 23 - $dollarat after pipe keep open
ok 24 - $pipe_r->read after keep pipe open
ok 25 - $buffer after keep pipe open
ok 26 - WIFEXITED($exitcode) after pipe keep shortcut
ok 27 - WEXITSTATUS($exitcode) after pipe keep shortcut
ok 28 - $dollarat after pipe keep shortcut
ok 29 - $pipe_r->read after keep pipe open
ok 30 - $buffer after keep pipe open
ok 31 - WIFEXITED($exitcode) after pipe dup to stdout
ok 32 - WEXITSTATUS($exitcode) after pipe dup to stdout
ok 33 - $dollarat after pipe dup to stdout
ok 34 - $pipe_r->read after pipe dup to stdout
ok 35 - $buffer after pipe dup to stdout
ok 36 - WIFEXITED($exitcode) after pipe dup to fd2
ok 37 - WEXITSTATUS($exitcode) after pipe dup to fd2
ok 38 - $dollarat after pipe dup to fd2
ok 39 - $pipe_r->read after pipe dup to fd2
ok 40 - $buffer after pipe dup to fd2
ok 41 - WIFEXITED($exitcode) after pipe dup to stderr
ok 42 - WEXITSTATUS($exitcode) after pipe dup to stderr
ok 43 - $dollarat after pipe dup to stderr
ok 44 - $pipe_r->read after pipe dup to stderr
ok 45 - $buffer after pipe dup to stderr
ok 46 - WIFEXITED($exitcode) after pipe dup to other FD
ok 47 - WEXITSTATUS($exitcode) after pipe dup to other FD
ok 48 - $dollarat after pipe dup to other FD
ok 49 - $pipe_r->read after pipe dup to other FD
ok 50 - $buffer after pipe dup to other FD
ok 51 - WIFEXITED($exitcode) after pipe dup to its own FD
ok 52 - WEXITSTATUS($exitcode) after pipe dup to its own FD
ok 53 - $dollarat after pipe dup to its own FD
ok 54 - $pipe_r->read after pipe dup to its own FD
ok 55 - $buffer after pipe dup to its own FD
ok 56 - WIFEXITED($exitcode) after other FD close
ok 57 - WEXITSTATUS($exitcode) after other FD close
ok 58 - $dollarbang numerically after other FD close
ok 59 - $dollarat after other FD close
ok 60 - WIFEXITED($exitcode) after writepipe clash
ok 61 - WEXITSTATUS($exitcode) after writepipe clash
ok 62 - $dollarat after writepipe clash
ok 63 - $pipe_r->read after writepipe clash
ok 64 - $buffer after writepipe clash
ok 65 - WIFEXITED($exitcode) after pipe dup to stdout and stderr
ok 66 - WEXITSTATUS($exitcode) after pipe dup to stdout and stderr
ok 67 - $dollarat after pipe dup to stdout and stderr
ok 68 - $pipe_r->read after pipe dup to stdout and stderr
ok 69 - $buffer after pipe dup to stdout and stderr
ok 70 - $pipe2_r->read after pipe dup to stdout and stderr
ok 71 - $buffer after pipe dup to stdout and stderr
ok 72 - WIFEXITED($exitcode) after pipe dup to stdout and stderr same pipe
ok 73 - WEXITSTATUS($exitcode) after pipe dup to stdout and stderr same pipe
ok 74 - $dollarat after pipe dup to stdout and stderr same pipe
ok 75 - $pipe_r->read after pipe dup to stdout and stderr same pipe
ok 76 - $buffer after pipe dup to stdout and stderr same pipe
ok 77 - WIFEXITED($exitcode) after pipe quad to fd0/fd1
ok 78 - WEXITSTATUS($exitcode) after pipe quad to fd0/fd1
ok 79 - $dollarat after pipe quad to fd0/fd1
ok 80 - $my_r->read after pipe quad to fd0/fd1
ok 81 - $buffer after pipe quad to fd0/fd1
ok 82 - WIFEXITED($exitcode) after fd swap
ok 83 - WEXITSTATUS($exitcode) after fd swap
ok 84 - $buffer [A] after dup2() swap
ok 85 - $buffer [B] after dup2() swap
ok 86 - WIFEXITED($exitcode) after stdout close
ok 87 - WEXITSTATUS($exitcode) after stdout close
ok 88 - $dollarbang numerically after stdout close
ok 89 - $dollarat after stdout close
ok 90 - WIFEXITED($exitcode) after stdout close shortcut
ok 91 - WEXITSTATUS($exitcode) after stdout close shortcut
ok 92 - $dollarbang numerically after stdout close shortcut
ok 93 - $dollarat after stdout close shortcut
ok 94 - WIFEXITED($exitcode) after stdout open
ok 95 - WEXITSTATUS($exitcode) after stdout open
ok 96 - $dollarat after stdout open
ok 97 - tmpnam file exists after stdout open
ok 98 - $tmpfh->read after stdout open
ok 99 - $buffer after stdout open
ok 100 - WIFEXITED($exitcode) after stdout open append
ok 101 - WEXITSTATUS($exitcode) after stdout open append
ok 102 - $dollarat after stdout open append
ok 103 - $tmpfh->read after stdout open append
ok 104 - $buffer after stdout open append
ok 105 - WIFEXITED($exitcode) after environment is preserved
ok 106 - WEXITSTATUS($exitcode) after environment is preserved
ok 107 - $dollarat after environment is preserved
ok 108 - WIFEXITED($exitcode) after environment is overwritten
ok 109 - WEXITSTATUS($exitcode) after environment is overwritten
ok 110 - $dollarat after environment is overwritten
ok 111 - WIFEXITED($exitcode) after nice works
ok 112 - WEXITSTATUS($exitcode) after nice works
ok 113 - $dollarat after nice works
ok 114 - WIFEXITED($exitcode) after chdir works
ok 115 - WEXITSTATUS($exitcode) after chdir works
ok 116 - $dollarat after chdir works
1..116
ok
t/33process.t ................ 
ok 1 - $process has refcount 1 before $loop->add
ok 2 - $process->notifier_name before $loop->add
ok 3 - $process is not yet running
ok 4 - $process has no PID yet
ok 5 - $process has refcount 2 after $loop->add
ok 6 - $process is running
ok 7 - $process now has a PID
ok 8 - $process->notifier_name after $loop->add
ok 9 - $_[0] in on_finish is $process
ok 10 - WIFEXITED($exitcode) after sub { 0 }
ok 11 - WEXITSTATUS($exitcode) after sub { 0 }
ok 12 - $process no longer running
ok 13 - $process still has PID after exit
ok 14 - $process->notifier_name after exit
ok 15 - $process->is_exited after sub { 0 }
ok 16 - $process->exitstatus after sub { 0 }
ok 17 - $process no longer in Loop
ok 18 - $process->finish_future is ready
ok 19 - $process->finish_future->get
ok 20 - $process has refcount 1 before EOS
ok 21 - WIFEXITED($exitcode) after sub { 2 }
ok 22 - WEXITSTATUS($exitcode) after sub { 2 }
ok 23 - $process->is_exited after sub { 3 }
ok 24 - $process->exitstatus after sub { 3 }
ok 25 - $process has refcount 1 before $loop->add
ok 26 - $process has refcount 2 after $loop->add
ok 27 - $_[0] in on_exception is $process
ok 28 - WIFEXITED($exitcode) after sub { die }
ok 29 - WEXITSTATUS($exitcode) after sub { die }
ok 30 - $exception after sub { die }
ok 31 - $process->is_exited after sub { die }
ok 32 - $process->exitstatus after sub { die }
ok 33 - $process->exception after sub { die }
ok 34 - $process has refcount 1 before EOS
ok 35 - WIFEXITED($exitcode) after sub { die } on_finish
ok 36 - WEXITSTATUS($exitcode) after sub { die } on_finish
ok 37 - $process->is_exited after sub { die } on_finish
ok 38 - $process->exitstatus after sub { die } on_finish
ok 39 - $process->exception after sub { die } on_finish
ok 40 - $process->is_exited after perl -e 1
ok 41 - $process->exitstatus after perl -e 1
ok 42 - $process->is_exited after perl -e exit 5
ok 43 - $process->exitstatus after perl -e exit 5
ok 44 - $errno number after donotexist
ok 45 - $errno string after donotexist
ok 46 - $process->is_exited after donotexist
ok 47 - $process->exitstatus after donotexist
ok 48 - $process->errno number after donotexist
ok 49 - $process->errno string after donotexist
ok 50 - $process->exception after donotexist
ok 51 - $process->is_exited after %ENV test
ok 52 - $process->exitstatus after %ENV test
ok 53 - $process->is_exited after ->kill
ok 54 - $process->exitstatus after ->kill
1..54
ok
t/34process-handles.t ........ 
ok 1 - '$process->stdout' isa 'IO::Async::Stream'
ok 2 - $process->stdout->notifier_name
ok 3 - $process->stdout has read_handle for sub { print }
ok 4 - $process->is_exited after sub { print }
ok 5 - $process->exitstatus after sub { print }
ok 6 - @stdout_lines after sub { print }
ok 7 - '$process->stdout' isa 'IO::Async::Stream'
ok 8 - $process->stdout has read_handle for sub { print } inline
ok 9 - $process->is_exited after sub { print } inline
ok 10 - $process->exitstatus after sub { print } inline
ok 11 - @stdout_lines after sub { print } inline
ok 12 - '$process->stdout' isa 'IO::Async::Stream'
ok 13 - $process->stdout has read_handle for sub { print } into
ok 14 - $process->is_exited after sub { print } into
ok 15 - $process->exitstatus after sub { print } into
ok 16 - $stdout after sub { print } into
ok 17 - $process->is_exited after perl STDOUT
ok 18 - $process->exitstatus after perl STDOUT
ok 19 - $stdout after perl STDOUT
ok 20 - '$process->stderr' isa 'IO::Async::Stream'
ok 21 - $process->stderr->notifier_name
ok 22 - $process->stderr has read_handle
ok 23 - $process->is_exited after perl STDOUT/STDERR
ok 24 - $process->exitstatus after perl STDOUT/STDERR
ok 25 - $stdout after perl STDOUT/STDERR
ok 26 - $stderr after perl STDOUT/STDERR
ok 27 - '$process->stdin' isa 'IO::Async::Stream'
ok 28 - $process->stdin->notifier_name
ok 29 - $process->stdin has write_handle for perl STDIN->STDOUT
ok 30 - $process->is_exited after perl STDIN->STDOUT
ok 31 - $process->exitstatus after perl STDIN->STDOUT
ok 32 - $stdout after perl STDIN->STDOUT
ok 33 - '$process->stdin' isa 'IO::Async::Stream'
ok 34 - $process->stdin has write_handle for perl STDIN no-wait close
ok 35 - $process->is_exited after perl STDIN no-wait close
ok 36 - $process->exitstatus after perl STDIN no-wait close
ok 37 - '$process->stdin' isa 'IO::Async::Stream'
ok 38 - $process->stdin has write_handle for perl STDIN->STDOUT from
ok 39 - $process->is_exited after perl STDIN->STDOUT from
ok 40 - $process->exitstatus after perl STDIN->STDOUT from
ok 41 - $stdout after perl STDIN->STDOUT from
ok 42 - '$process->stdin' isa 'IO::Async::Stream'
ok 43 - $process->stdin has write_handle for perl STDIN->STDOUT from empty string
ok 44 - $process->is_exited after perl STDIN->STDOUT from empty string
ok 45 - $process->exitstatus after perl STDIN->STDOUT from empty string
ok 46 - $stdout after perl STDIN->STDOUT from empty string
ok 47 - $process->is_exited after perl STDIN->STDOUT using fd[n]
ok 48 - $process->exitstatus after perl STDIN->STDOUT using fd[n]
ok 49 - $stdout after perl STDIN->STDOUT using fd[n]
ok 50 - '$process->stdio' isa 'IO::Async::Stream'
ok 51 - $process->stdio->notifier_name
ok 52 - $process->stdio has read_handle for perl STDIO
ok 53 - $process->stdio has write_handle for perl STDIO
ok 54 - $process->is_exited after perl STDIO
ok 55 - $process->exitstatus after perl STDIO
ok 56 - @output_lines after perl STDIO
ok 57 - $process->is_exited after perl STDIN->STDOUT using stdio
ok 58 - $process->exitstatus after perl STDIN->STDOUT using stdio
ok 59 - $stdout after perl STDIN->STDOUT using stdio
ok 60 - '$process->stdio isa Stream' isa 'IO::Async::Stream'
ok 61 - '$process->stdio handle isa IO::Socket' isa 'IO::Socket'
ok 62 - $process->is_exited after perl STDIO via socketpair
ok 63 - $process->exitstatus after perl STDIO via socketpair
ok 64 - $output_packet after perl STDIO via socketpair
ok 65 - '$process->stdio isa Stream' isa 'IO::Async::Stream'
ok 66 - '$process->stdio handle isa IO::Socket' isa 'IO::Socket'
ok 67 - $process->is_exited after perl STDIO via socketpair
ok 68 - $process->exitstatus after perl STDIO via socketpair
ok 69 - $output_packet from prefork via socketpair
ok 70 - '$process->stdio isa Stream' isa 'IO::Async::Stream'
ok 71 - '$process->stdio handle isa IO::Socket' isa 'IO::Socket'
ok 72 - $process->stdio handle sockdomain is PF_INET
ok 73 - '$process->stdio isa Socket' isa 'IO::Async::Socket'
ok 74 - '$process->stdio handle isa IO::Socket' isa 'IO::Socket'
ok 75 - $process->stdio handle sockdomain is defined
ok 76 - $process->is_exited after perl STDIO via dgram socketpair
ok 77 - $process->exitstatus after perl STDIO via dgram socketpair
ok 78 - @output_packets after perl STDIO via dgram socketpair
1..78
ok
t/35loop-openprocess.t ....... 
ok 1 - '$proc from ->open_process' isa 'IO::Async::Process'
ok 2 - WIFEXITED($exitcode) after sub { 0 }
ok 3 - WEXITSTATUS($exitcode) after sub { 0 }
ok 4 - Missing on_finish fails
ok 5 - on_exit parameter fails
ok 6 - $loop->open_child returns a PID-like number
ok 7 - on_finish passed the same PID as returned from ->open_child
ok 8 - on_finish not CODE ref fails
1..8
ok
t/36loop-runchild.t .......... 
ok 1 - WIFEXITED($exitcode) after sub { 0 }
ok 2 - WEXITSTATUS($exitcode) after sub { 0 }
ok 3 - $child_out after sub { 0 }
ok 4 - $child_err after sub { 0 }
ok 5 - WIFEXITED($exitcode) after sub { 3 }
ok 6 - WEXITSTATUS($exitcode) after sub { 3 }
ok 7 - $child_out after sub { 3 }
ok 8 - $child_err after sub { 3 }
ok 9 - WIFEXITED($exitcode) after perl -e 1
ok 10 - WEXITSTATUS($exitcode) after perl -e 1
ok 11 - $child_out after perl -e 1
ok 12 - $child_err after perl -e 1
ok 13 - WIFEXITED($exitcode) after perl -e exit 5
ok 14 - WEXITSTATUS($exitcode) after perl -e exit 5
ok 15 - $child_out after perl -e exit 5
ok 16 - $child_err after perl -e exit 5
ok 17 - WIFEXITED($exitcode) after sub { print }
ok 18 - WEXITSTATUS($exitcode) after sub { print }
ok 19 - $child_out after sub { print }
ok 20 - $child_err after sub { print }
ok 21 - WIFEXITED($exitcode) after perl STDOUT
ok 22 - WEXITSTATUS($exitcode) after perl STDOUT
ok 23 - $child_out after perl STDOUT
ok 24 - $child_err after perl STDOUT
ok 25 - WIFEXITED($exitcode) after perl STDOUT/STDERR
ok 26 - WEXITSTATUS($exitcode) after perl STDOUT/STDERR
ok 27 - $child_out after perl STDOUT/STDERR
ok 28 - $child_err after perl STDOUT/STDERR
ok 29 - WIFEXITED($exitcode) after perl STDIN->STDOUT
ok 30 - WEXITSTATUS($exitcode) after perl STDIN->STDOUT
ok 31 - $child_out after perl STDIN->STDOUT
ok 32 - $child_err after perl STDIN->STDOUT
ok 33 - Missing on_finish fails
ok 34 - on_finish not CODE ref fails
ok 35 - on_exit parameter fails
ok 36 - unrecognised key fails
1..36
ok
t/37loop-child-root.t ........ skipped: not root
t/38loop-thread.t ............ 
ok 1 - result to on_joined for returning thread
ok 2 - result to on_joined for returning thread in list context
ok 3 - result to on_joined for a died thread
1..3
ok
t/39loop-runproccess.t ....... 
ok 1 - $f->get from code gives exitcode
ok 2 - $f->get from command gives exitcode
ok 3 - $f->get from code gives stdout
ok 4 - $f->get from command gives stdout
ok 5 - $f->get from command gives stdout and stderr
ok 6 - $f->get from command given stdin gives stdout
ok 7 - $f->get from command with default capture
ok 8 - $f->get from command with all captures
ok 9 - Process received cancel signal
ok 10 - $f->failed with fail_on_nonzero
ok 11 - $f->failure category
ok 12 - $f->failure details
ok 13 - unrecognised key fails
ok 14 - Capture in capture format
ok 15 - Invalid capture type
ok 16 - Failing when finish callback is passed
1..16
ok
t/40channel.t ................ 
# Default IO::Async::Channel codec is Sereal
ok 1 - Sync mode channels can send/recv structures
ok 2 - Sync mode channels can send_encoded
ok 3 - Channel->encode works as a class method
ok 4 - Sync mode can be closed
ok 5 - Async mode channel can send
ok 6 - Sync mode can be closed
ok 7 - Channel passed to on_recv
ok 8 - Async mode channel can on_recv
ok 9 - Async mode channel can on_eof
ok 10 - Async mode future can receive data
ok 11 - Async mode future can receive EOF
ok 12 - Channel passed to ->recv on_recv
ok 13 - Async mode channel can ->recv on_recv
ok 14 - Async mode channel can ->recv on_eof
ok 15 - Async mode channel can ->recv buffer at EOF
ok 16 - Async recv result after cancellation
ok 17 - Channel can use Sereal as codec
1..17
ok
t/41routine.t ................ 
ok 1 - '$routine for fork model' isa 'IO::Async::Routine'
ok 2 - $routine has refcount 1 initially for fork model
ok 3 - $routine has refcount 2 after $loop->add for fork model
ok 4 - $routine->model for fork model
ok 5 - Result for fork model
ok 6 - $routine has refcount 2 before $loop->remove
ok 7 - $routine has refcount 1 before EOF
ok 8 - on_return for fork model
ok 9 - Result from ->result_future of return
ok 10 - on_die for fork model
ok 11 - Failure from ->result_future of die
ok 12 - Recv on closed channel for fork model
ok 13 - Routine is ready for SIGINT
ok 14 - Routine caught SIGINT
ok 15 - '$routine for thread model' isa 'IO::Async::Routine'
ok 16 - $routine has refcount 1 initially for thread model
ok 17 - $routine has refcount 2 after $loop->add for thread model
ok 18 - $routine->model for thread model
ok 19 - Result for thread model
ok 20 - $routine has refcount 2 before $loop->remove
ok 21 - $routine has refcount 1 before EOF
ok 22 - on_return for thread model
ok 23 - Result from ->result_future of return
ok 24 - on_die for thread model
ok 25 - Failure from ->result_future of die
ok 26 - Recv on closed channel for thread model
ok 27 - Routine is ready for SIGINT
ok 28 - Routine caught SIGINT
ok 29 - '$routine' isa 'IO::Async::Routine'
ok 30 - $status_f result midway through Routine
ok 31 - $result_f result at end of Routine
ok 32 - synchronous src->sink can share a channel
ok 33 - $result from Routine with modified ENV
ok 34 - Write-to-STD{OUT+ERR} wrote to pipe
1..34
ok
Warning: unable to close filehandle $wr properly: Bad file descriptor during global destruction.
Warning: unable to close filehandle $wr properly: Bad file descriptor during global destruction.
Warning: unable to close filehandle $out properly: Bad file descriptor during global destruction.
Warning: unable to close filehandle $out properly: Bad file descriptor during global destruction.
Warning: unable to close filehandle properly: Bad file descriptor during global destruction.
Warning: unable to close filehandle properly: Bad file descriptor during global destruction.
t/42function.t ............... 
ok 1 - $function defined
ok 2 - '$function isa IO::Async::Function' isa 'IO::Async::Function'
ok 3 - $function has refcount 1
ok 4 - $function has refcount 2 after $loop->add
ok 5 - $function has 1 worker
ok 6 - $function has 0 workers busy
ok 7 - $function has 1 workers idle
ok 8 - '$future' isa 'Future'
ok 9 - $function has refcount 2 after ->call
ok 10 - $function has 1 worker busy after ->call
ok 11 - $function has 0 worker idle after ->call
ok 12 - $result after call returns by future
ok 13 - $function has 0 workers busy after call returns
ok 14 - $function has 1 workers idle after call returns
ok 15 - $stop_f succeeds
ok 16 - $result after call returns by callback
ok 17 - $function->workers is still 1 after 2 calls
ok 18 - '$f1' isa 'Future'
ok 19 - '$f2' isa 'Future'
ok 20 - @result after both calls return
ok 21 - $function->workers is still 1 after 2 calls return
ok 22 - $function->call with priority enqueues correctly
ok 23 - Call and result preserves references
ok 24 - $err after exception
ok 25 - $f->failure after exception
ok 26 - $f->failure after exception with detail
ok 27 - Closed variables preserved when exit_on_die => 0
ok 28 - Closed variables preserved when exit_on_die => 1
ok 29 - $err->[0] after child death
ok 30 - $function->workers is now 0
ok 31 - $function->workers is now 1 again
ok 32 - $err is "return" after child nondeath
ok 33 - init_code can side-effect captured variables
ok 34 - $function->workers is 3
ok 35 - synchronise files created
ok 36 - ret keys after parallel run
ok 37 - $function->workers is still 3
ok 38 - $function has 1 worker after call
ok 39 - $function still has 1 worker after short delay
ok 40 - $function has 0 workers after longer delay
ok 41 - $result before restart
ok 42 - $result after restart
ok 43 - call before restart still returns result
ok 44 - $result from first call
ok 45 - $result from second call
ok 46 - $result from third call
ok 47 - Result of function call after cancelled call
ok 48 - $f1 result is undef
ok 49 - $f3 result is 1
1..49
ok
t/51loop-connect.t ........... 
ok 1 - '$future' isa 'Future'
ok 2 - IO::Socket::IP->can(...)
ok 3 - by addr: $sock->getpeername is $addr from future
ok 4 - '$future for ->connect( handle )' isa 'Future'
ok 5 - $future->get returns given Stream
ok 6 - $stream has a read handle
ok 7 - Returned $stream->read_handle->getpeername is $addr
ok 8 - IO::Socket::IP->can(...)
ok 9 - by addr: $sock->getpeername is $addr
ok 10 - '$future' isa 'Future'
ok 11 - IO::Socket::IP->can(...)
ok 12 - by host/service: $sock->getpeername is $addr from future
ok 13 - $sock->sockhost is INADDR_LOOPBACK_HOST from future
ok 14 - IO::Socket::IP->can(...)
ok 15 - by host/service: $sock->getpeername is $addr
ok 16 - $sock->sockhost is INADDR_LOOPBACK_HOST
ok 17 - $sock->sockhost is 127.0.0.2
ok 18 - 'on_stream $stream isa IO::Async::Stream' isa 'IO::Async::Stream'
ok 19 - on_stream $sock->getpeername is $addr
ok 20 - '$future for ->connect( handle socket )' isa 'Future'
ok 21 - $future->get returns given Socket
ok 22 - Returned $socket->read_handle->getpeername is $addr
ok 23 - 'on_socket $sock isa IO::Async::Socket' isa 'IO::Async::Socket'
ok 24 - on_socket $sock->read_handle->getpeername is $addr
ok 25 - $failop is connect
ok 26 - $failerr is ENOENT
ok 27 - $failop is connect
ok 28 - $failerr is ENOENT
ok 29 - $future failed
ok 30 - $future fail op is connect
ok 31 - $future fail err is ENOENT
ok 32 - $failop is connect
ok 33 - $failerr is 'Connection refused'
ok 34 - $error[0] is connect
ok 35 - $error[1] is 'Connection refused'
1..35
ok
t/52loop-listen.t ............ 
ok 1 - $loop->listen on handle ready synchronously
ok 2 - 'synchronous on_notifier given a Notifier' isa 'IO::Async::Notifier'
ok 3 - synchronous $notifier->loop is $loop
ok 4 - $clientsock is connected
ok 5 - $newclient peer is correct
ok 6 - $listensock has a fileno
ok 7 - IO::Socket::IP->can(...)
ok 8 - 'asynchronous on_notifier given a Notifier' isa 'IO::Async::Notifier'
ok 9 - asynchronous $notifier->loop is $loop
ok 10 - $listensock has address
ok 11 - $listenaddr is INADDR_LOOPBACK
ok 12 - $clientsock on the correct port
ok 13 - IO::Socket::IP->can(...)
ok 14 - $newclient peer is correct
ok 15 - Managed to capture listener being added to Loop
ok 16 - $failop is bind
ok 17 - $failerr is 'Permission denied'
ok 18 - $error[0] is bind
ok 19 - $error[1] is 'Permission denied'
ok 20 - $listener defined after bind failure
ok 21 - $listener not in loop after bind failure
1..21
ok
t/53loop-extend.t ............ 
ok 1 - FOO_connect invocant is $loop
ok 2 - FOO_connect received on_connected continuation
ok 3 - FOO_connect received some_param and no others
ok 4 - FOO_connect returns Future object
ok 5 - FOO_connect invocant is $loop
ok 6 - FOO_connect still receives other extensions
ok 7 - FOO_listen invocant is $loop
ok 8 - '$listenargs{listener}' isa 'IO::Async::Listener'
ok 9 - FOO_listen received some_param and no others
ok 10 - FOO_listen returns Future object
ok 11 - FOO_listen invocant is $loop
ok 12 - FOO_listen still receives other extensions
1..12
ok
t/60protocol.t ............... 
ok 1 - $proto defined
ok 2 - '$proto isa IO::Async::Protocol' isa 'IO::Async::Protocol'
ok 3 - $proto has refcount 1 initially
ok 4 - $proto->transport
ok 5 - @setup_args after configure transport
ok 6 - $setup_args[0] after configure transport
ok 7 - $proto has refcount 1 after configure transport
ok 8 - $handle has refcount 3 after proto configure transport
ok 9 - $proto has refcount 2 after adding to Loop
ok 10 - $handle has refcount 4 after adding proto to Loop
ok 11 - $readready after wait
ok 12 - $proto->transport after reconfigure
ok 13 - @teardown_args after reconfigure transport
ok 14 - $teardown_args[0] after reconfigure transport
ok 15 - @setup_args after reconfigure transport
ok 16 - $setup_args[0] after reconfigure transport
ok 17 - $handle has refcount 1 after reconfigure
ok 18 - $closed after stream close
ok 19 - $proto->transport is undef after close
ok 20 - $proto has refcount 2 before removal from Loop
ok 21 - $proto has refcount 1 before EOF
1..21
ok
t/61protocol-stream.t ........ 
ok 1 - $streamproto defined
ok 2 - '$streamproto isa IO::Async::Protocol::Stream' isa 'IO::Async::Protocol::Stream'
ok 3 - $streamproto has refcount 1 initially
ok 4 - $streamproto has refcount 2 after adding to Loop
ok 5 - @lines before wait
ok 6 - @lines after wait
ok 7 - @lines still empty after on_read replace
ok 8 - @new_lines after on_read replace
ok 9 - response written by protocol
ok 10 - writersub $_[0] is $streamproto
ok 11 - writersub $_[0] is $streamproto
ok 12 - on_flush $_[0] is $streamproto
ok 13 - response written by protocol writersub
ok 14 - $closed after stream close
ok 15 - $streamproto has refcount 2 before removing from Loop
ok 16 - $streamproto refcount 1 finally
ok 17 - subclass $streamproto defined
ok 18 - '$streamproto isa IO::Async::Protocol::Stream' isa 'IO::Async::Protocol::Stream'
ok 19 - subclass $streamproto has refcount 1 initially
ok 20 - subclass $streamproto has refcount 2 after adding to Loop
ok 21 - @sub_lines before wait
ok 22 - @sub_lines after wait
ok 23 - Protocol is connected to server socket port
ok 24 - Protocol transport works
ok 25 - $read_eof after on_read_eof
ok 26 - $write_eof after on_write_eof
1..26
ok
t/62protocol-linestream.t .... 
ok 1 - $linestreamproto defined
ok 2 - '$linestreamproto isa IO::Async::Protocol::LineStream' isa 'IO::Async::Protocol::LineStream'
ok 3 - $linestreamproto has refcount 1 initially
ok 4 - $linestreamproto has refcount 2 after adding to Loop
ok 5 - @lines before wait
ok 6 - @lines after wait
ok 7 - @lines still empty after on_read replace
ok 8 - @new_lines after on_read replace
ok 9 - response written by protocol
ok 10 - subclass $linestreamproto defined
ok 11 - '$linestreamproto isa IO::Async::Protocol::LineStream' isa 'IO::Async::Protocol::LineStream'
ok 12 - subclass $linestreamproto has refcount 1 initially
ok 13 - subclass $linestreamproto has refcount 2 after adding to Loop
ok 14 - @sub_lines before wait
ok 15 - @sub_lines after wait
1..15
ok
t/63handle-connect.t ......... 
ok 1 - $handle->connect Future defined
ok 2 - $handle->read_handle defined after ->connect addr
ok 3 - $handle->read_handle->peerport after ->connect addr
ok 4 - $handle->read_handle defined after ->connect host/service
ok 5 - $handle->read_handle->peerport after ->connect host/service
1..5
ok
t/64handle-bind.t ............ 
ok 1 - $receiver bound to a read handle
1..1
ok
t/70future-io.t .............. skipped: Future::IO is not available
t/99pod.t .................... 
1..38
ok 1 - POD test for blib/lib/IO/Async.pm
ok 2 - POD test for blib/lib/IO/Async/Timer.pm
ok 3 - POD test for blib/lib/IO/Async/Test.pm
ok 4 - POD test for blib/lib/IO/Async/Stream.pm
ok 5 - POD test for blib/lib/IO/Async/Socket.pm
ok 6 - POD test for blib/lib/IO/Async/Signal.pm
ok 7 - POD test for blib/lib/IO/Async/Routine.pm
ok 8 - POD test for blib/lib/IO/Async/Resolver.pm
ok 9 - POD test for blib/lib/IO/Async/Protocol.pm
ok 10 - POD test for blib/lib/IO/Async/Process.pm
ok 11 - POD test for blib/lib/IO/Async/PID.pm
ok 12 - POD test for blib/lib/IO/Async/OS.pm
ok 13 - POD test for blib/lib/IO/Async/Notifier.pm
ok 14 - POD test for blib/lib/IO/Async/Metrics.pm
ok 15 - POD test for blib/lib/IO/Async/LoopTests.pm
ok 16 - POD test for blib/lib/IO/Async/Loop.pm
ok 17 - POD test for blib/lib/IO/Async/Listener.pm
ok 18 - POD test for blib/lib/IO/Async/Handle.pm
ok 19 - POD test for blib/lib/IO/Async/Future.pm
ok 20 - POD test for blib/lib/IO/Async/Function.pm
ok 21 - POD test for blib/lib/IO/Async/FileStream.pm
ok 22 - POD test for blib/lib/IO/Async/File.pm
ok 23 - POD test for blib/lib/IO/Async/Debug.pm
ok 24 - POD test for blib/lib/IO/Async/Channel.pm
ok 25 - POD test for blib/lib/IO/Async/Timer/Periodic.pm
ok 26 - POD test for blib/lib/IO/Async/Timer/Countdown.pm
ok 27 - POD test for blib/lib/IO/Async/Timer/Absolute.pm
ok 28 - POD test for blib/lib/IO/Async/Protocol/Stream.pm
ok 29 - POD test for blib/lib/IO/Async/Protocol/LineStream.pm
ok 30 - POD test for blib/lib/IO/Async/OS/linux.pm
ok 31 - POD test for blib/lib/IO/Async/OS/cygwin.pm
ok 32 - POD test for blib/lib/IO/Async/OS/MSWin32.pm
ok 33 - POD test for blib/lib/IO/Async/Loop/Select.pm
ok 34 - POD test for blib/lib/IO/Async/Loop/Poll.pm
ok 35 - POD test for blib/lib/IO/Async/Internals/TimeQueue.pm (no pod)
ok 36 - POD test for blib/lib/IO/Async/Internals/Connector.pm (no pod)
ok 37 - POD test for blib/lib/IO/Async/Internals/ChildManager.pm (no pod)
ok 38 - POD test for blib/lib/Future/IO/Impl/IOAsync.pm
ok
All tests successful.
Files=63, Tests=1631, 105 wallclock secs ( 0.61 usr  0.17 sys + 18.85 cusr  2.47 csys = 22.10 CPU)
Result: PASS
make[1]: Leaving directory '/build/libio-async-perl-0.78'
   create-stamp debian/debhelper-build-stamp
   dh_prep
   dh_auto_install
	perl Build install --destdir /build/libio-async-perl-0.78/debian/libio-async-perl --create_packlist 0
Building IO-Async
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Timer.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Test.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Stream.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Socket.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Signal.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Routine.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Resolver.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Protocol.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Process.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/PID.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/OS.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Notifier.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Metrics.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/LoopTests.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Loop.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Listener.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Handle.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Future.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Function.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/FileStream.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/File.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Debug.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Channel.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Timer/Periodic.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Timer/Countdown.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Timer/Absolute.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Protocol/Stream.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Protocol/LineStream.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/OS/linux.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/OS/cygwin.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/OS/MSWin32.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Loop/Select.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Loop/Poll.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Internals/TimeQueue.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Internals/Connector.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/IO/Async/Internals/ChildManager.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/perl5/Future/IO/Impl/IOAsync.pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Timer::Periodic.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Timer::Countdown.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Timer::Absolute.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Timer.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Test.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Stream.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Socket.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Signal.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Routine.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Resolver.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Protocol::Stream.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Protocol::LineStream.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Protocol.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Process.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::PID.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::OS::linux.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::OS::cygwin.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::OS::MSWin32.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::OS.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Notifier.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Metrics.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::LoopTests.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Loop::Select.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Loop::Poll.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Loop.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Listener.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Handle.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Future.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Function.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::FileStream.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::File.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Debug.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async::Channel.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/IO::Async.3pm
Installing /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/man/man3/Future::IO::Impl::IOAsync.3pm
   dh_installdocs
   dh_installchangelogs
   dh_installexamples
   dh_installman
   dh_perl
   dh_link
   dh_strip_nondeterminism
   dh_compress
   debian/rules override_dh_fixperms
make[1]: Entering directory '/build/libio-async-perl-0.78'
dh_fixperms
chmod a+x /build/libio-async-perl-0.78/debian/libio-async-perl/usr/share/doc/libio-async-perl/examples/*.pl
make[1]: Leaving directory '/build/libio-async-perl-0.78'
   dh_missing
   dh_installdeb
   dh_gencontrol
   dh_md5sums
   dh_builddeb
dpkg-deb: building package 'libio-async-perl' in '../libio-async-perl_0.78-1_all.deb'.
 dpkg-genbuildinfo --build=binary
 dpkg-genchanges --build=binary >../libio-async-perl_0.78-1_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
 dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
dpkg-genchanges: info: including full source code in upload
I: copying local configuration
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env 
I: removing directory /srv/workspace/pbuilder/15500 and its subdirectories
I: Current time: Fri Sep 16 00:46:37 -12 2022
I: pbuilder-time-stamp: 1663332397