I: pbuilder: network access will be disabled during build I: Current time: Fri Jul 9 13:58:10 +14 2021 I: pbuilder-time-stamp: 1625788690 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libcoro-perl_6.570-1.dsc] I: copying [./libcoro-perl_6.570.orig.tar.gz] I: copying [./libcoro-perl_6.570-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.5iqyeMtf/trustedkeys.kbx': General error gpgv: Signature made Fri Jul 31 06:33:23 2020 +14 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libcoro-perl_6.570-1.dsc dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.570 dpkg-source: info: unpacking libcoro-perl_6.570.orig.tar.gz dpkg-source: info: unpacking libcoro-perl_6.570-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying whatis.patch dpkg-source: info: applying spelling.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/6484/tmp/hooks/D01_modify_environment starting debug: Running on codethink10-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash Removing 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /bin/sh to /bin/sh.distrib by bash' Removing 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by bash' I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/6484/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/6484/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="1" [2]="4" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.1.4(1)-release' BUILDDIR=/build BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8' DIRSTACK=() DISTRIBUTION= EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/var/lib/jenkins HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=6484 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.XaCMcm44g4/pbuilderrc_4rNc --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.XaCMcm44g4/b2 --logfile b2/build.log --extrapackages usrmerge libcoro-perl_6.570-1.dsc' SUDO_GID=117 SUDO_UID=110 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root USERNAME=root _='I: set' http_proxy=http://192.168.101.16:3128 I: uname -a Linux i-capture-the-hostname 4.15.0-147-generic #151-Ubuntu SMP Fri Jun 18 19:18:37 UTC 2021 aarch64 GNU/Linux I: ls -l /bin total 5252 -rwxr-xr-x 1 root root 1282512 Jun 22 16:26 bash -rwxr-xr-x 3 root root 34808 Jul 21 2020 bunzip2 -rwxr-xr-x 3 root root 34808 Jul 21 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 21 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 21 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 21 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 5 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 21 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 21 2020 bzgrep -rwxr-xr-x 3 root root 34808 Jul 21 2020 bzip2 -rwxr-xr-x 1 root root 14264 Jul 21 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 21 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 21 2020 bzmore -rwxr-xr-x 1 root root 39832 Sep 23 2020 cat -rwxr-xr-x 1 root root 64512 Sep 23 2020 chgrp -rwxr-xr-x 1 root root 60368 Sep 23 2020 chmod -rwxr-xr-x 1 root root 64528 Sep 23 2020 chown -rwxr-xr-x 1 root root 138896 Sep 23 2020 cp -rwxr-xr-x 1 root root 129544 Dec 11 2020 dash -rwxr-xr-x 1 root root 101384 Sep 23 2020 date -rwxr-xr-x 1 root root 80984 Sep 23 2020 dd -rwxr-xr-x 1 root root 89824 Sep 23 2020 df -rwxr-xr-x 1 root root 143088 Sep 23 2020 dir -rwxr-xr-x 1 root root 76152 Feb 8 04:38 dmesg lrwxrwxrwx 1 root root 8 Nov 8 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 8 2019 domainname -> hostname -rwxr-xr-x 1 root root 35632 Sep 23 2020 echo -rwxr-xr-x 1 root root 28 Nov 10 2020 egrep -rwxr-xr-x 1 root root 31512 Sep 23 2020 false -rwxr-xr-x 1 root root 28 Nov 10 2020 fgrep -rwxr-xr-x 1 root root 64856 Feb 8 04:38 findmnt -rwsr-xr-x 1 root root 34824 Feb 27 06:12 fusermount -rwxr-xr-x 1 root root 178400 Nov 10 2020 grep -rwxr-xr-x 2 root root 2346 Mar 3 13:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 3 13:30 gzexe -rwxr-xr-x 1 root root 93744 Mar 3 13:30 gzip -rwxr-xr-x 1 root root 18440 Nov 8 2019 hostname -rwxr-xr-x 1 root root 68720 Sep 23 2020 ln -rwxr-xr-x 1 root root 52720 Feb 8 2020 login -rwxr-xr-x 1 root root 143088 Sep 23 2020 ls -rwxr-xr-x 1 root root 161960 Feb 8 04:38 lsblk -rwxr-xr-x 1 root root 85200 Sep 23 2020 mkdir -rwxr-xr-x 1 root root 68744 Sep 23 2020 mknod -rwxr-xr-x 1 root root 43976 Sep 23 2020 mktemp -rwxr-xr-x 1 root root 51368 Feb 8 04:38 more -rwsr-xr-x 1 root root 51360 Feb 8 04:38 mount -rwxr-xr-x 1 root root 14496 Feb 8 04:38 mountpoint -rwxr-xr-x 1 root root 134808 Sep 23 2020 mv lrwxrwxrwx 1 root root 8 Nov 8 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 19 05:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 35720 Sep 23 2020 pwd lrwxrwxrwx 1 root root 4 Jun 22 16:26 rbash -> bash -rwxr-xr-x 1 root root 43872 Sep 23 2020 readlink -rwxr-xr-x 1 root root 68592 Sep 23 2020 rm -rwxr-xr-x 1 root root 43880 Sep 23 2020 rmdir -rwxr-xr-x 1 root root 19208 Sep 28 2020 run-parts -rwxr-xr-x 1 root root 114016 Dec 23 2018 sed lrwxrwxrwx 1 root root 4 Jul 9 13:58 sh -> bash lrwxrwxrwx 1 root root 4 Jul 7 23:24 sh.distrib -> dash -rwxr-xr-x 1 root root 35656 Sep 23 2020 sleep -rwxr-xr-x 1 root root 72640 Sep 23 2020 stty -rwsr-xr-x 1 root root 67776 Feb 8 04:38 su -rwxr-xr-x 1 root root 35672 Sep 23 2020 sync -rwxr-xr-x 1 root root 535768 Feb 17 23:55 tar -rwxr-xr-x 1 root root 10568 Sep 28 2020 tempfile -rwxr-xr-x 1 root root 89120 Sep 23 2020 touch -rwxr-xr-x 1 root root 31512 Sep 23 2020 true -rwxr-xr-x 1 root root 14264 Feb 27 06:12 ulockmgr_server -rwsr-xr-x 1 root root 30880 Feb 8 04:38 umount -rwxr-xr-x 1 root root 35640 Sep 23 2020 uname -rwxr-xr-x 2 root root 2346 Mar 3 13:30 uncompress -rwxr-xr-x 1 root root 143088 Sep 23 2020 vdir -rwxr-xr-x 1 root root 59584 Feb 8 04:38 wdctl lrwxrwxrwx 1 root root 8 Nov 8 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 3 13:30 zcat -rwxr-xr-x 1 root root 1678 Mar 3 13:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 3 13:30 zdiff -rwxr-xr-x 1 root root 29 Mar 3 13:30 zegrep -rwxr-xr-x 1 root root 29 Mar 3 13:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 3 13:30 zforce -rwxr-xr-x 1 root root 7585 Mar 3 13:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 3 13:30 zless -rwxr-xr-x 1 root root 1842 Mar 3 13:30 zmore -rwxr-xr-x 1 root root 4553 Mar 3 13:30 znew I: user script /srv/workspace/pbuilder/6484/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libanyevent-perl; however: Package libanyevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on libcommon-sense-perl; however: Package libcommon-sense-perl is not installed. pbuilder-satisfydepends-dummy depends on libev-perl; however: Package libev-perl is not installed. pbuilder-satisfydepends-dummy depends on libevent-perl; however: Package libevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libguard-perl; however: Package libguard-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libanyevent-perl{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libcommon-sense-perl{a} libdebhelper-perl{a} libelf1{a} libev-perl{a} libevent-perl{a} libfile-stripnondeterminism-perl{a} libguard-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libperl-dev{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libasync-interrupt-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 19.9 MB of archives. After unpacking 74.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-7 [141 kB] Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB] Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB] Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB] Get: 6 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB] Get: 9 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB] Get: 11 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB] Get: 12 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB] Get: 13 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.11.0-1 [25.6 kB] Get: 23 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.11.0-1 [15.3 kB] Get: 24 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB] Get: 25 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB] Get: 26 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB] Get: 27 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB] Get: 28 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB] Get: 29 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main arm64 libanyevent-perl arm64 7.170-2+b1 [399 kB] Get: 33 http://deb.debian.org/debian bullseye/main arm64 libcanary-stability-perl arm64 2006-2 [8772 B] Get: 34 http://deb.debian.org/debian bullseye/main arm64 libcommon-sense-perl arm64 3.75-1+b4 [24.6 kB] Get: 35 http://deb.debian.org/debian bullseye/main arm64 libev-perl arm64 4.33-1+b1 [259 kB] Get: 36 http://deb.debian.org/debian bullseye/main arm64 libevent-perl arm64 1.27-1+b2 [262 kB] Get: 37 http://deb.debian.org/debian bullseye/main arm64 libguard-perl arm64 1.023-1+b7 [15.5 kB] Get: 38 http://deb.debian.org/debian bullseye/main arm64 libperl-dev arm64 5.32.1-4 [992 kB] Fetched 19.9 MB in 0s (42.8 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-7_arm64.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../01-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_arm64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../03-libpipeline1_1.5.3-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_arm64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_arm64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../07-libmagic1_1%3a5.39-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_arm64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_arm64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:arm64. Preparing to unpack .../10-libsigsegv2_2.13-1_arm64.deb ... Unpacking libsigsegv2:arm64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_arm64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.11.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.11.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.11.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.11.0-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../23-libelf1_0.183-1_arm64.deb ... Unpacking libelf1:arm64 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_arm64.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:arm64. Preparing to unpack .../25-libicu67_67.1-7_arm64.deb ... Unpacking libicu67:arm64 (67.1-7) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_arm64.deb ... Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_arm64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../31-libanyevent-perl_7.170-2+b1_arm64.deb ... Unpacking libanyevent-perl (7.170-2+b1) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../32-libcanary-stability-perl_2006-2_arm64.deb ... Unpacking libcanary-stability-perl (2006-2) ... Selecting previously unselected package libcommon-sense-perl. Preparing to unpack .../33-libcommon-sense-perl_3.75-1+b4_arm64.deb ... Unpacking libcommon-sense-perl (3.75-1+b4) ... Selecting previously unselected package libev-perl. Preparing to unpack .../34-libev-perl_4.33-1+b1_arm64.deb ... Unpacking libev-perl (4.33-1+b1) ... Selecting previously unselected package libevent-perl. Preparing to unpack .../35-libevent-perl_1.27-1+b2_arm64.deb ... Unpacking libevent-perl (1.27-1+b2) ... Selecting previously unselected package libguard-perl. Preparing to unpack .../36-libguard-perl_1.023-1+b7_arm64.deb ... Unpacking libguard-perl (1.023-1+b7) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../37-libperl-dev_5.32.1-4_arm64.deb ... Unpacking libperl-dev:arm64 (5.32.1-4) ... Setting up libanyevent-perl (7.170-2+b1) ... Setting up libpipeline1:arm64 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libevent-perl (1.27-1+b2) ... Setting up libicu67:arm64 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:arm64 (1:5.39-3) ... Setting up libcommon-sense-perl (3.75-1+b4) ... Setting up gettext-base (0.21-4) ... Setting up libperl-dev:arm64 (5.32.1-4) ... Setting up file (1:5.39-3) ... Setting up libcanary-stability-perl (2006-2) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:arm64 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libev-perl (4.33-1+b1) ... Setting up libelf1:arm64 (0.183-1) ... Setting up libguard-perl (1.023-1+b7) ... Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.11.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.11.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl The following NEW packages will be installed: libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl usrmerge 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 59.5 kB of archives. After this operation, 157 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian bullseye/main arm64 libnumber-compare-perl all 0.03-1.1 [6956 B] Get:2 http://deb.debian.org/debian bullseye/main arm64 libtext-glob-perl all 0.11-1 [8888 B] Get:3 http://deb.debian.org/debian bullseye/main arm64 libfile-find-rule-perl all 0.34-1 [30.6 kB] Get:4 http://deb.debian.org/debian bullseye/main arm64 usrmerge all 25 [13.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 59.5 kB in 0s (3042 kB/s) Selecting previously unselected package libnumber-compare-perl. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21702 files and directories currently installed.) Preparing to unpack .../libnumber-compare-perl_0.03-1.1_all.deb ... Unpacking libnumber-compare-perl (0.03-1.1) ... Selecting previously unselected package libtext-glob-perl. Preparing to unpack .../libtext-glob-perl_0.11-1_all.deb ... Unpacking libtext-glob-perl (0.11-1) ... Selecting previously unselected package libfile-find-rule-perl. Preparing to unpack .../libfile-find-rule-perl_0.34-1_all.deb ... Unpacking libfile-find-rule-perl (0.34-1) ... Selecting previously unselected package usrmerge. Preparing to unpack .../archives/usrmerge_25_all.deb ... Unpacking usrmerge (25) ... Setting up libtext-glob-perl (0.11-1) ... Setting up libnumber-compare-perl (0.03-1.1) ... Setting up libfile-find-rule-perl (0.34-1) ... Setting up usrmerge (25) ... The system has been successfully converted. Processing triggers for man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. I: Building the package hostname: Temporary failure in name resolution I: Running cd /build/libcoro-perl-6.570/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libcoro-perl_6.570-1_source.changes dpkg-buildpackage: info: source package libcoro-perl dpkg-buildpackage: info: source version 6.570-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.032001, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Coro. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Coro, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Coro with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Event version 1.27 found, building Event support. EV version 4.33 found, building EV support. Checking if your kit is complete... Looks good *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has a number of configuration options. Due to its maturity, the defaults that Coro chooses are usually fine, so you can decide to skip these questions. Only if something went wrong you should select 'n' here and manually configure Coro, and, of course, report this to the maintainer :) Skip further questions and use defaults (y/n)? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a number of methods to implement coroutines at the C level. The default chosen is based on your current confguration and is correct in most cases, but you still can chose between these alternatives: u The unix 'ucontext.h' functions are relatively new and not implemented or well-tested in older unices. They allow very fast coroutine creation and reasonably fast switching. They are, however, usually slower than the other alternatives due to an extra syscall done by swapcontext. And while nominally most portable (it's the only POSIX-standardised interface for coroutines), ucontext functions are, as usual, broken on most/all BSDs. s If the ucontext functions are not working or you don't want to use them for other reasons you can try a workaround using setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine creation is rather slow, but switching is very fast (often much faster than with the ucontext functions). Unfortunately, glibc-2.1 and below don't even feature a working sigaltstack. You cannot use this implementation if some other code uses SIGUSR2 or you plan to create coroutines from an alternative signal stack, as both are being used for coroutine creation. a Handcoded assembly. This is the fastest and most compatible method, with the least side effects, if it works, that is. It has been tested on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64 systems using the SVR ELF ABI (it is also reported to be working on Strawberry Perl for Windows using MinGW). This is the recommended method on supported platforms. When it doesn't work, use another method, such as (s)etjmp/longjmp. l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need this hack. Since it is very linux-specific it is also quite fast and recommended even for newer versions; when it works, that is (currently x86 and a few others only. If it compiles, it's usually ok). Newer glibc versions (>= 2.5) stop working with this implementation however. i IRIX. For some reason, SGI really does not like to follow POSIX (does that surprise you?), so this workaround might be needed (it's fast), although [s] and [u] should also work now. w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry Perl), although, as there is no standard on how to do this under windows, different environments might work differently. Doh. f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower and uses a lot more memory, but should be working all the time. p Use pthread API. Try to avoid this option, it was only created to make a point about the programming language shootout. It is unlikely to work with perls that have windows process emulation enabled ("perl threads"). It is also likely the slowest method of implementing coroutines. It might work fine as a last resort, however, as the pthread API is slightly better tested than ucontext functions for example. Of course, not on BSDs, who usually have very broken pthread implementations. Coro tries hard to come up with a suitable default for most systems, so pressing return at the prompt usually does the right thing. If you experience problems (e.g. make test fails) then you should experiment with this setting. Use which implementation, etjmp, ctx, sm, rix, inux,

threads, indows, iber? [s] s Using setjmp/longjmp/sigaltstack implementation Trying to detect stack growth direction (for TEST_sigaltstack) You might see some warnings, this should not concern you. libcoro/conftest.c: In function 'main': libcoro/conftest.c:98:28: error: storage size of 'ss' isn't known 98 | struct sigaltstack ss; | ^~ ***************************************************************************** If the testsuite fails PLEASE provide the following information to Marc Lehmann : operating system name, version, architecture name and this string '|'. Thanks a lot! ***************************************************************************** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro Writing MYMETA.yml and MYMETA.json dh_auto_build make -j8 make[1]: Entering directory '/build/libcoro-perl-6.570' make[2]: Entering directory '/build/libcoro-perl-6.570/Coro' Running Mkbootstrap for State () "/usr/bin/perl" "/usr/share/perl/5.32.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.32/ExtUtils/typemap' -typemap '/build/libcoro-perl-6.570/Coro/typemap' State.xs > State.xsc chmod 644 "State.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 cp Coro/AIO.pm blib/lib/Coro/AIO.pm cp Coro/Signal.pm blib/lib/Coro/Signal.pm cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/Select.pm blib/lib/Coro/Select.pm cp Coro.pm blib/lib/Coro.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/BDB.pm blib/lib/Coro/BDB.pm cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/Handle.pm blib/lib/Coro/Handle.pm cp Coro/State.pm blib/lib/Coro/State.pm cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) Skip ../blib/lib/Coro/State.pm (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/Semaphore.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/Select.pm (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) Skip ../blib/lib/Coro/Signal.pm (unchanged) cp Intro.pod ../blib/lib/Coro/Intro.pod Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Skip ../blib/lib/Coro/RWLock.pm (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) Skip ../blib/lib/Coro/Timer.pm (unchanged) Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3897 mv State.xsc State.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.32/CORE" -D_FORTIFY_SOURCE=0 -DCORO_SJLJ -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c : warning: "_FORTIFY_SOURCE" redefined : note: this is the location of the previous definition rm -f ../blib/arch/auto/Coro/State/State.so aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \ \ chmod 755 ../blib/arch/auto/Coro/State/State.so Manifying 20 pod documents make[2]: Leaving directory '/build/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/libcoro-perl-6.570/Event' Running Mkbootstrap for Event () "/usr/bin/perl" "/usr/share/perl/5.32.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.32/ExtUtils/typemap' Event.xs > Event.xsc chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 cp Event.pm ../blib/lib/Coro/Event.pm mv Event.xsc Event.c aarch64-linux-gnu-gcc -c -I/usr/lib/aarch64-linux-gnu/perl5/5.32/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.32/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c rm -f ../blib/arch/auto/Coro/Event/Event.so aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \ \ chmod 755 ../blib/arch/auto/Coro/Event/Event.so Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/libcoro-perl-6.570/EV' Running Mkbootstrap for EV () "/usr/bin/perl" "/usr/share/perl/5.32.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.32/ExtUtils/typemap' EV.xs > EV.xsc chmod 644 "EV.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 cp EV.pm ../blib/lib/Coro/EV.pm mv EV.xsc EV.c aarch64-linux-gnu-gcc -c -I/usr/lib/aarch64-linux-gnu/perl5/5.32/EV -I/usr/lib/aarch64-linux-gnu/perl5/5.32 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.32/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c rm -f ../blib/arch/auto/Coro/EV/EV.so aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libcoro-perl-6.570=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \ \ chmod 755 ../blib/arch/auto/Coro/EV/EV.so Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.570/EV' Manifying 20 pod documents make[1]: Leaving directory '/build/libcoro-perl-6.570' dh_auto_test make -j8 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libcoro-perl-6.570' make[2]: Entering directory '/build/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[2]: Leaving directory '/build/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/libcoro-perl-6.570/EV' make[2]: Entering directory '/build/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 No tests defined for Coro::State extension. make[2]: Leaving directory '/build/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 0 wallclock secs ( 0.05 usr 0.01 sys + 0.17 cusr 0.07 csys = 0.30 CPU) Result: PASS make[2]: Leaving directory '/build/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.15 cusr 0.05 csys = 0.26 CPU) Result: PASS make[2]: Leaving directory '/build/libcoro-perl-6.570/EV' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_basic.t .......... 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok t/01_process.t ........ 1..13 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok t/02_channel.t ........ 1..19 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok t/03_channel.t ........ 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/04_rwlock.t ......... 1..25 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok t/05_specific.t ....... 1..8 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok t/06_prio.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/07_eval.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/08_join.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/10_bugs.t ........... 1..3 ok 1 ok 2 ok 3 ok t/11_deadlock.t ....... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/12_exit.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/13_diewarn.t ........ 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/14_load.t ........... 1..17 ok 1 # Coro::State () ok 2 # Coro () ok 3 # Coro::MakeMaker () ok 4 # Coro::Signal () ok 5 # Coro::Semaphore () ok 6 # Coro::SemaphoreSet () ok 7 # Coro::Channel () ok 8 # Coro::Specific () ok 9 # Coro::RWLock () ok 10 # Coro::AnyEvent () ok 11 # Coro::Timer () ok 12 # Coro::Util () ok 13 # Coro::Select () ok 14 # Coro::Handle () ok 15 # Coro::Socket () ok 16 # Coro::Storable () ok 17 # Coro::Debug () ok t/15_semaphore.t ...... 1..6 ok 1 # 998 ok 2 ok 3 ok 4 ok 5 ok 6 ok t/16_signal.t ......... 1..18 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok t/17_rouse.t .......... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/18_winder.t ......... 1..17 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok t/19_handle.t ......... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/20_mutual_cancel.t .. 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok All tests successful. Files=20, Tests=206, 1 wallclock secs ( 0.14 usr 0.03 sys + 0.85 cusr 0.18 csys = 1.20 CPU) Result: PASS make[1]: Leaving directory '/build/libcoro-perl-6.570' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/libcoro-perl-6.570' dh_auto_install make -j8 install DESTDIR=/build/libcoro-perl-6.570/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/libcoro-perl-6.570' make[3]: Entering directory '/build/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[3]: Leaving directory '/build/libcoro-perl-6.570/Coro' make[3]: Entering directory '/build/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[3]: Leaving directory '/build/libcoro-perl-6.570/Event' make[3]: Entering directory '/build/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[3]: Leaving directory '/build/libcoro-perl-6.570/EV' Manifying 20 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/auto/Coro/EV/EV.so Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/auto/Coro/Event/Event.so Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/auto/Coro/State/State.so Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/EV.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Event.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Intro.pod Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/SemaphoreSet.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/State.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Handle.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/LWP.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Util.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/CoroAPI.h Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Timer.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Debug.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/jit-x86-unix.pl Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/RWLock.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/AnyEvent.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/BDB.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Channel.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Semaphore.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Specific.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Select.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Storable.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Socket.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/jit-amd64-unix.pl Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/MakeMaker.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/Signal.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/AIO.pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm Installing /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm make[2]: Leaving directory '/build/libcoro-perl-6.570' sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/libcoro-perl-6.570/debian/libcoro-perl//usr/lib/aarch64-linux-gnu/perl5/5.32/Coro/*.pl make[1]: Leaving directory '/build/libcoro-perl-6.570' dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/libcoro-perl-6.570' dh_installexamples sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/libcoro-perl-6.570/debian/libcoro-perl/usr/share/doc/libcoro-perl/examples/* make[1]: Leaving directory '/build/libcoro-perl-6.570' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.570-1_arm64.deb'. dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.570-1_arm64.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libcoro-perl_6.570-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/6484/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/6484/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/6484 and its subdirectories I: Current time: Fri Jul 9 13:59:00 +14 2021 I: pbuilder-time-stamp: 1625788740