I: pbuilder: network access will be disabled during build I: Current time: Sat Aug 16 20:06:59 +14 2025 I: pbuilder-time-stamp: 1755324419 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libgetopt-argparse-perl_1.0.6-2.dsc] I: copying [./libgetopt-argparse-perl_1.0.6.orig.tar.gz] I: copying [./libgetopt-argparse-perl_1.0.6-2.debian.tar.xz] I: Extracting source gpgv: Signature made Wed Jun 15 10:56:27 2022 +14 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libgetopt-argparse-perl_1.0.6-2.dsc: no acceptable signature found dpkg-source: info: extracting libgetopt-argparse-perl in libgetopt-argparse-perl-1.0.6 dpkg-source: info: unpacking libgetopt-argparse-perl_1.0.6.orig.tar.gz tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'LIBARCHIVE.creationtime' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'LIBARCHIVE.creationtime' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' tar: Ignoring unknown extended header keyword 'SCHILY.dev' tar: Ignoring unknown extended header keyword 'SCHILY.ino' tar: Ignoring unknown extended header keyword 'SCHILY.nlink' dpkg-source: info: unpacking libgetopt-argparse-perl_1.0.6-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying spelling-error-in-manpage.patch dpkg-source: info: applying manpage-has-bad-whatis-entry.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/66734/tmp/hooks/D01_modify_environment starting debug: Running on ionos16-i386. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Aug 16 20:07 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/66734/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/66734/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="15" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") BASH_VERSION='5.2.15(1)-release' BUILDDIR=/build BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=i386 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=15 ' DIRSTACK=() DISTRIBUTION=bookworm EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=i686 HOST_ARCH=i386 IFS=' ' INVOCATION_ID=7529925f66064aeba57caf6e724c0698 LANG=C LANGUAGE=de_CH:de LC_ALL=C LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so MACHTYPE=i686-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=66734 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.xL5APL5S/pbuilderrc_weUX --distribution bookworm --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.xL5APL5S/b2 --logfile b2/build.log --extrapackages usrmerge libgetopt-argparse-perl_1.0.6-2.dsc' SUDO_GID=112 SUDO_UID=107 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://85.184.249.68:3128 I: uname -a Linux i-capture-the-hostname 5.10.0-23-amd64 #1 SMP Debian 5.10.179-1 (2023-05-12) x86_64 GNU/Linux I: ls -l /bin total 6036 -rwxr-xr-x 1 root root 1408088 Apr 24 2023 bash -rwxr-xr-x 3 root root 38404 Sep 19 2022 bunzip2 -rwxr-xr-x 3 root root 38404 Sep 19 2022 bzcat lrwxrwxrwx 1 root root 6 Sep 19 2022 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Sep 19 2022 bzdiff lrwxrwxrwx 1 root root 6 Sep 19 2022 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4893 Nov 28 2021 bzexe lrwxrwxrwx 1 root root 6 Sep 19 2022 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Sep 19 2022 bzgrep -rwxr-xr-x 3 root root 38404 Sep 19 2022 bzip2 -rwxr-xr-x 1 root root 17892 Sep 19 2022 bzip2recover lrwxrwxrwx 1 root root 6 Sep 19 2022 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Sep 19 2022 bzmore -rwxr-xr-x 1 root root 42920 Sep 21 2022 cat -rwxr-xr-x 1 root root 79816 Sep 21 2022 chgrp -rwxr-xr-x 1 root root 67496 Sep 21 2022 chmod -rwxr-xr-x 1 root root 79816 Sep 21 2022 chown -rwxr-xr-x 1 root root 162024 Sep 21 2022 cp -rwxr-xr-x 1 root root 136916 Jan 6 2023 dash -rwxr-xr-x 1 root root 137160 Sep 21 2022 date -rwxr-xr-x 1 root root 100364 Sep 21 2022 dd -rwxr-xr-x 1 root root 108940 Sep 21 2022 df -rwxr-xr-x 1 root root 162152 Sep 21 2022 dir -rwxr-xr-x 1 root root 87760 Mar 24 2023 dmesg lrwxrwxrwx 1 root root 8 Dec 20 2022 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Dec 20 2022 domainname -> hostname -rwxr-xr-x 1 root root 38760 Sep 21 2022 echo -rwxr-xr-x 1 root root 41 Jan 25 2023 egrep -rwxr-xr-x 1 root root 34664 Sep 21 2022 false -rwxr-xr-x 1 root root 41 Jan 25 2023 fgrep -rwxr-xr-x 1 root root 84272 Mar 24 2023 findmnt -rwsr-xr-x 1 root root 30240 Mar 23 2023 fusermount -rwxr-xr-x 1 root root 218680 Jan 25 2023 grep -rwxr-xr-x 2 root root 2346 Apr 10 2022 gunzip -rwxr-xr-x 1 root root 6447 Apr 10 2022 gzexe -rwxr-xr-x 1 root root 100952 Apr 10 2022 gzip -rwxr-xr-x 1 root root 21916 Dec 20 2022 hostname -rwxr-xr-x 1 root root 75756 Sep 21 2022 ln -rwxr-xr-x 1 root root 55600 Mar 24 2023 login -rwxr-xr-x 1 root root 162152 Sep 21 2022 ls -rwxr-xr-x 1 root root 214568 Mar 24 2023 lsblk -rwxr-xr-x 1 root root 96328 Sep 21 2022 mkdir -rwxr-xr-x 1 root root 84008 Sep 21 2022 mknod -rwxr-xr-x 1 root root 38792 Sep 21 2022 mktemp -rwxr-xr-x 1 root root 63016 Mar 24 2023 more -rwsr-xr-x 1 root root 58912 Mar 24 2023 mount -rwxr-xr-x 1 root root 13856 Mar 24 2023 mountpoint -rwxr-xr-x 1 root root 157932 Sep 21 2022 mv lrwxrwxrwx 1 root root 8 Dec 20 2022 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 3 2023 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 38792 Sep 21 2022 pwd lrwxrwxrwx 1 root root 4 Apr 24 2023 rbash -> bash -rwxr-xr-x 1 root root 51080 Sep 21 2022 readlink -rwxr-xr-x 1 root root 75720 Sep 21 2022 rm -rwxr-xr-x 1 root root 51080 Sep 21 2022 rmdir -rwxr-xr-x 1 root root 22308 Nov 3 2022 run-parts -rwxr-xr-x 1 root root 133224 Jan 6 2023 sed lrwxrwxrwx 1 root root 9 Aug 16 20:07 sh -> /bin/bash -rwxr-xr-x 1 root root 38760 Sep 21 2022 sleep -rwxr-xr-x 1 root root 87976 Sep 21 2022 stty -rwsr-xr-x 1 root root 83492 Mar 24 2023 su -rwxr-xr-x 1 root root 38792 Sep 21 2022 sync -rwxr-xr-x 1 root root 598456 Apr 7 2023 tar -rwxr-xr-x 1 root root 13860 Nov 3 2022 tempfile -rwxr-xr-x 1 root root 120776 Sep 21 2022 touch -rwxr-xr-x 1 root root 34664 Sep 21 2022 true -rwxr-xr-x 1 root root 17892 Mar 23 2023 ulockmgr_server -rwsr-xr-x 1 root root 30236 Mar 24 2023 umount -rwxr-xr-x 1 root root 38760 Sep 21 2022 uname -rwxr-xr-x 2 root root 2346 Apr 10 2022 uncompress -rwxr-xr-x 1 root root 162152 Sep 21 2022 vdir -rwxr-xr-x 1 root root 71216 Mar 24 2023 wdctl lrwxrwxrwx 1 root root 8 Dec 20 2022 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Apr 10 2022 zcat -rwxr-xr-x 1 root root 1678 Apr 10 2022 zcmp -rwxr-xr-x 1 root root 6460 Apr 10 2022 zdiff -rwxr-xr-x 1 root root 29 Apr 10 2022 zegrep -rwxr-xr-x 1 root root 29 Apr 10 2022 zfgrep -rwxr-xr-x 1 root root 2081 Apr 10 2022 zforce -rwxr-xr-x 1 root root 8103 Apr 10 2022 zgrep -rwxr-xr-x 1 root root 2206 Apr 10 2022 zless -rwxr-xr-x 1 root root 1842 Apr 10 2022 zmore -rwxr-xr-x 1 root root 4577 Apr 10 2022 znew I: user script /srv/workspace/pbuilder/66734/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmoo-perl, libtest-exception-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19599 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmoo-perl; however: Package libmoo-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-exception-perl; however: Package libtest-exception-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libb-hooks-op-check-perl{a} libclass-method-modifiers-perl{a} libclass-xsaccessor-perl{a} libdebhelper-perl{a} libdevel-callchecker-perl{a} libdynaloader-functions-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libimport-into-perl{a} libmagic-mgc{a} libmagic1{a} libmodule-runtime-perl{a} libmoo-perl{a} libparams-classify-perl{a} libpipeline1{a} librole-tiny-perl{a} libsub-override-perl{a} libsub-quote-perl{a} libsub-uplevel-perl{a} libtest-exception-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libnamespace-clean-perl libxstring-perl lynx wget 0 packages upgraded, 43 newly installed, 0 to remove and 0 not upgraded. Need to get 19.3 MB of archives. After unpacking 73.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bookworm/main i386 sensible-utils all 0.0.17+nmu1 [19.0 kB] Get: 2 http://deb.debian.org/debian bookworm/main i386 libmagic-mgc i386 1:5.44-3 [305 kB] Get: 3 http://deb.debian.org/debian bookworm/main i386 libmagic1 i386 1:5.44-3 [114 kB] Get: 4 http://deb.debian.org/debian bookworm/main i386 file i386 1:5.44-3 [42.5 kB] Get: 5 http://deb.debian.org/debian bookworm/main i386 gettext-base i386 0.21-12 [162 kB] Get: 6 http://deb.debian.org/debian bookworm/main i386 libuchardet0 i386 0.0.7-1 [67.9 kB] Get: 7 http://deb.debian.org/debian bookworm/main i386 groff-base i386 1.22.4-10 [932 kB] Get: 8 http://deb.debian.org/debian bookworm/main i386 bsdextrautils i386 2.38.1-5+b1 [90.3 kB] Get: 9 http://deb.debian.org/debian bookworm/main i386 libpipeline1 i386 1.5.7-1 [40.0 kB] Get: 10 http://deb.debian.org/debian bookworm/main i386 man-db i386 2.11.2-2 [1397 kB] Get: 11 http://deb.debian.org/debian bookworm/main i386 m4 i386 1.4.19-3 [294 kB] Get: 12 http://deb.debian.org/debian bookworm/main i386 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian bookworm/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian bookworm/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian bookworm/main i386 autopoint all 0.21-12 [495 kB] Get: 16 http://deb.debian.org/debian bookworm/main i386 libdebhelper-perl all 13.11.4 [81.2 kB] Get: 17 http://deb.debian.org/debian bookworm/main i386 libtool all 2.4.7-5 [517 kB] Get: 18 http://deb.debian.org/debian bookworm/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian bookworm/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian bookworm/main i386 libsub-override-perl all 0.09-4 [9304 B] Get: 21 http://deb.debian.org/debian bookworm/main i386 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian bookworm/main i386 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian bookworm/main i386 libelf1 i386 0.188-2.1 [179 kB] Get: 24 http://deb.debian.org/debian bookworm/main i386 dwz i386 0.15-1 [118 kB] Get: 25 http://deb.debian.org/debian bookworm/main i386 libicu72 i386 72.1-3 [9541 kB] Get: 26 http://deb.debian.org/debian bookworm/main i386 libxml2 i386 2.9.14+dfsg-1.2 [720 kB] Get: 27 http://deb.debian.org/debian bookworm/main i386 gettext i386 0.21-12 [1311 kB] Get: 28 http://deb.debian.org/debian bookworm/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian bookworm/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian bookworm/main i386 debhelper all 13.11.4 [942 kB] Get: 31 http://deb.debian.org/debian bookworm/main i386 libb-hooks-op-check-perl i386 0.22-2+b1 [10.6 kB] Get: 32 http://deb.debian.org/debian bookworm/main i386 libclass-method-modifiers-perl all 2.14-1 [18.1 kB] Get: 33 http://deb.debian.org/debian bookworm/main i386 libclass-xsaccessor-perl i386 1.19-4+b1 [38.0 kB] Get: 34 http://deb.debian.org/debian bookworm/main i386 libdynaloader-functions-perl all 0.003-3 [12.7 kB] Get: 35 http://deb.debian.org/debian bookworm/main i386 libdevel-callchecker-perl i386 0.008-2 [15.8 kB] Get: 36 http://deb.debian.org/debian bookworm/main i386 libparams-classify-perl i386 0.015-2+b1 [23.7 kB] Get: 37 http://deb.debian.org/debian bookworm/main i386 libmodule-runtime-perl all 0.016-2 [19.6 kB] Get: 38 http://deb.debian.org/debian bookworm/main i386 libimport-into-perl all 1.002005-2 [11.3 kB] Get: 39 http://deb.debian.org/debian bookworm/main i386 librole-tiny-perl all 2.002004-1 [21.4 kB] Get: 40 http://deb.debian.org/debian bookworm/main i386 libsub-quote-perl all 2.006008-1 [21.8 kB] Get: 41 http://deb.debian.org/debian bookworm/main i386 libmoo-perl all 2.005005-1 [58.0 kB] Get: 42 http://deb.debian.org/debian bookworm/main i386 libsub-uplevel-perl all 0.2800-3 [14.0 kB] Get: 43 http://deb.debian.org/debian bookworm/main i386 libtest-exception-perl all 0.43-3 [16.9 kB] Fetched 19.3 MB in 0s (84.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19599 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_i386.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../02-libmagic1_1%3a5.44-3_i386.deb ... Unpacking libmagic1:i386 (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.44-3_i386.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-12_i386.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.7-1_i386.deb ... Unpacking libuchardet0:i386 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.22.4-10_i386.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.38.1-5+b1_i386.deb ... Unpacking bsdextrautils (2.38.1-5+b1) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.7-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.11.2-2_i386.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-3_i386.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../22-libelf1_0.188-2.1_i386.deb ... Unpacking libelf1:i386 (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_i386.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../24-libicu72_72.1-3_i386.deb ... Unpacking libicu72:i386 (72.1-3) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.2_i386.deb ... Unpacking libxml2:i386 (2.9.14+dfsg-1.2) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-12_i386.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package libb-hooks-op-check-perl:i386. Preparing to unpack .../30-libb-hooks-op-check-perl_0.22-2+b1_i386.deb ... Unpacking libb-hooks-op-check-perl:i386 (0.22-2+b1) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../31-libclass-method-modifiers-perl_2.14-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.14-1) ... Selecting previously unselected package libclass-xsaccessor-perl. Preparing to unpack .../32-libclass-xsaccessor-perl_1.19-4+b1_i386.deb ... Unpacking libclass-xsaccessor-perl (1.19-4+b1) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../33-libdynaloader-functions-perl_0.003-3_all.deb ... Unpacking libdynaloader-functions-perl (0.003-3) ... Selecting previously unselected package libdevel-callchecker-perl:i386. Preparing to unpack .../34-libdevel-callchecker-perl_0.008-2_i386.deb ... Unpacking libdevel-callchecker-perl:i386 (0.008-2) ... Selecting previously unselected package libparams-classify-perl:i386. Preparing to unpack .../35-libparams-classify-perl_0.015-2+b1_i386.deb ... Unpacking libparams-classify-perl:i386 (0.015-2+b1) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../36-libmodule-runtime-perl_0.016-2_all.deb ... Unpacking libmodule-runtime-perl (0.016-2) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../37-libimport-into-perl_1.002005-2_all.deb ... Unpacking libimport-into-perl (1.002005-2) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../38-librole-tiny-perl_2.002004-1_all.deb ... Unpacking librole-tiny-perl (2.002004-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../39-libsub-quote-perl_2.006008-1_all.deb ... Unpacking libsub-quote-perl (2.006008-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../40-libmoo-perl_2.005005-1_all.deb ... Unpacking libmoo-perl (2.005005-1) ... Selecting previously unselected package libsub-uplevel-perl. Preparing to unpack .../41-libsub-uplevel-perl_0.2800-3_all.deb ... Unpacking libsub-uplevel-perl (0.2800-3) ... Selecting previously unselected package libtest-exception-perl. Preparing to unpack .../42-libtest-exception-perl_0.43-3_all.deb ... Unpacking libtest-exception-perl (0.43-3) ... Setting up libpipeline1:i386 (1.5.7-1) ... Setting up libicu72:i386 (72.1-3) ... Setting up bsdextrautils (2.38.1-5+b1) ... Setting up libdynaloader-functions-perl (0.003-3) ... Setting up libclass-method-modifiers-perl (2.14-1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libmagic1:i386 (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-12) ... Setting up libb-hooks-op-check-perl:i386 (0.22-2+b1) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:i386 (0.0.7-1) ... Setting up librole-tiny-perl (2.002004-1) ... Setting up libsub-uplevel-perl (0.2800-3) ... Setting up libsub-override-perl (0.09-4) ... Setting up libsub-quote-perl (2.006008-1) ... Setting up libclass-xsaccessor-perl (1.19-4+b1) ... Setting up libelf1:i386 (0.188-2.1) ... Setting up libxml2:i386 (2.9.14+dfsg-1.2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up libdevel-callchecker-perl:i386 (0.008-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libtest-exception-perl (0.43-3) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libparams-classify-perl:i386 (0.015-2+b1) ... Setting up man-db (2.11.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libmodule-runtime-perl (0.016-2) ... Setting up libimport-into-perl (1.002005-2) ... Setting up libmoo-perl (2.005005-1) ... Setting up debhelper (13.11.4) ... Processing triggers for libc-bin (2.36-9) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... usrmerge is already the newest version (35). fakeroot is already the newest version (1.31-1.2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/66734/tmp/hooks/A99_set_merged_usr starting Re-configuring usrmerge... removed '/etc/unsupported-skip-usrmerge-conversion' The system has been successfully converted. I: user script /srv/workspace/pbuilder/66734/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/libgetopt-argparse-perl-1.0.6/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libgetopt-argparse-perl_1.0.6-2_source.changes dpkg-buildpackage: info: source package libgetopt-argparse-perl dpkg-buildpackage: info: source version 1.0.6-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libgetopt-argparse-perl-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libgetopt-argparse-perl-1.0.6=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Warning: NAME must be a package name Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Getopt-ArgParse Writing MYMETA.yml and MYMETA.json dh_auto_build make -j15 make[1]: Entering directory '/build/libgetopt-argparse-perl-1.0.6' cp lib/Getopt/ArgParse.pm blib/lib/Getopt/ArgParse.pm cp lib/Getopt/ArgParse/ActionStore.pm blib/lib/Getopt/ArgParse/ActionStore.pm cp lib/Getopt/ArgParse/ActionCount.pm blib/lib/Getopt/ArgParse/ActionCount.pm cp lib/Getopt/ArgParse/ActionAppend.pm blib/lib/Getopt/ArgParse/ActionAppend.pm cp lib/Getopt/ArgParse/Parser.pm blib/lib/Getopt/ArgParse/Parser.pm cp lib/Getopt/ArgParse/Namespace.pm blib/lib/Getopt/ArgParse/Namespace.pm Manifying 6 pod documents make[1]: Leaving directory '/build/libgetopt-argparse-perl-1.0.6' dh_auto_test make -j15 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libgetopt-argparse-perl-1.0.6' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # a,b,c t/argparse.t .... ok 1 - use Getopt::ArgParse; ok 2 - require Getopt::ArgParse::Parser; ok 3 - require Getopt::ArgParse::ActionStore; ok 4 - require Getopt::ArgParse::ActionAppend; ok 5 - require Getopt::ArgParse::ActionCount; ok 6 - new parser ok 7 ok 8 - incorrect number of arguments ok 9 ok 10 - current_command is not defined ok 11 - argv has got the unconsumed argv ok 12 - argv[0] is 20 ok 13 - default option ok 14 - has boo store true ok 15 - append array ok 16 - simple position ok 17 - unknown type ok 18 - nargs 2 1..18 ok # abc@perl.org, xyz@perl.org # # mytram2@perl.org # abc@perl.org t/array.t ....... ok 1 - new argparser ok 2 - append - minimal setup ok 3 - append - minimal setup,not specified ok 4 - append - required with default ok 5 - append - specified - size ok 6 - append - specified - element ok 7 - append - ref - size ok 8 - append - ref - element ok 9 - new argparser ok 10 - not enough arguments ok 11 ok 12 - boo2 not defined ok 13 - required option boo3 not value ok 14 ok 15 - boo3 is 5 1..15 ok t/choices.t ..... ok 1 - new argparser ok 2 - choice error: not in choices - arrayref ok 3 - choice error: not in choices - coderef ok 4 - choice ok - fixed value a ok 5 - choice ok - case insensative A ok 6 - not allow to specify choices and choices_i ok 7 - only allow arrayref ok 8 ok 9 - not in allowed choices_i ok 10 - WORLD is OK ok 11 - HEllo is OK too 1..11 ok # 3 t/count.t ....... ok 1 - count 3 ok 2 - positional arg: 100 ok 3 - positional arg: 200 ok 4 - count again now is 6 ok 5 - count default is 3 ok 6 - count default is still 3 1..6 ok t/default.t ..... ok 1 - new argparser ok 2 - required default 10 ok 3 - optional default 20 ok 4 - foo 20 ok 5 - multiple default values not allowed ok 6 - non-hash type ok 7 ok 8 - hash = 1 1..8 ok usage: mysvn [--help|-h] [--verbose|-v] [] optional named arguments: --help, -h ? show this help message and exit --verbose, -v ? This is option verbose subcommands: help display help information about mysvn list list the directories copyright me t/help.t ........ ok 1 - pid return 1..1 ok list: list the directories usage: list [--help|-h] [--verbose|-v] optional named arguments: --help, -h ? show this help message and exit --verbose, -v ? verbosity Default: 0 t/help2.t ....... ok 1 - pid return 1..1 ok usage: mysvn [--help|-h] [--verbose|-v] [] optional named arguments: --help, -h ? show this help message and exit --verbose, -v ? This is option verbose subcommands: help display help information about mysvn list list the directories t/help3.t ....... ok 1 - pid return 1..1 ok t/merge.t ....... ok 1 - dry-run ok 2 - no dry-run ok 3 - unknown option ok 4 - unknown option: foo ok 5 - parse1: dry-run ok 6 - parse1: no dry-run ok 7 - parse2: dry-run ok 8 - parse2: no dry-run 1..8 ok t/name.t ........ 1..10 ok 1 - new argparser ok 2 - add option -f ok 3 - -f already used for a different option ok 4 - non-empty name is required ok 5 - add multiple flag option ok 6 - parse args ok 7 - use name to refer to option ok 8 - use dest to refer to option ok 9 - use alternative flag ok 10 - dashes replaced with underscores in dest ok t/nargs.t ....... ok 1 - new argparser ok 2 - boo is 100 nargs=>1 ok 3 ok 4 - boo2 is not taken nargs=>? ok 5 ok 6 - boo2 is 300 nargs=>? ok 7 - too few arguments for + ok 8 ok 9 - new argparser ok 10 ok 11 ok 12 - nargs=>* boo1->[4] is 500 ok 13 - not allowed for optional options ok 14 - invalid nargs 1..14 ok # 'hello world' t/pair.t ........ ok 1 - hello=world ok 2 - a=1 ok 3 - b=2 ok 4 ok 5 - command=list ok 6 - a=b ok 7 - b=1 ok 8 - c=2 ok 9 - redefine option with reset ok 10 ok 11 ok 12 - a=10, from default 1..12 ok t/required.t .... ok 1 - new argparser ok 2 ok 3 - required_option ok 4 - optional_option is undef ok 5 ok 6 - required_option ok 7 - optional_option is hello ok 8 - required option ok 9 ok 10 - help ok 11 ok 12 - list -help ok 13 - boo is not required ok 14 - required positional arg: boo ok 15 ok 16 - boo is 100 ok 17 - Redfine option boo ok 18 ok 19 ok 20 - not enough args for boo ok 21 - boo is required ok 22 - not enough args for boo ok 23 ok 24 - boo 0 - 100 ok 25 - boo 1 - 20 1..25 ok t/split.t ....... ok 1 - new argparser ok 2 - split count ok 3 - split value: single ok 4 - split count ok 5 - split value ok 6 - a=1 ok 7 - b=2 ok 8 - c=3 1..8 ok t/store.t ....... ok 1 - new argparser ok 2 - v - true ok 3 - q - true ok 4 - vv - false ok 5 - q - false ok 6 - no_vv - true ok 7 - no_q - true ok 8 - foo can only have one value ok 9 ok 10 - 200 ok ok 11 - boo is 100 1..11 ok t/subcommand.t .. ok 1 - new parser ok 2 - incorrect number of args ok 3 - unknown parameters ok 4 ok 5 - subparsers already added ok 6 - add_subparsers is not called ok 7 - Subcommand is empty ok 8 - Incorrect number of args ok 9 - Unknown parameters ok 10 - subcommand listx already defined ok 11 - aliases is not an arrayref ok 12 - alias already used ok 13 - foo is 100 ok 14 - unknown option ok 15 - list2 is not a command ok 16 ok 17 - current_command is list ok 18 - list's foo is true ok 19 - list's boo is true 1..19 ok usage: usage.t BOO BOO2 --email2|--e2 --email [--help|-h] [--verbose] [--nboo] [--boo] [--foo|-f] [] This is the suite that contains usage message test cases required positional arguments: BOO This is option boo_post BOO2 This is option boo2 Default: 3=90, a=1 required named arguments: --email2, --e2 EMAIL2 This is option email2 --email EMAIL This is option email optional named arguments: --help, -h ? show this help message and exit --verbose ? This is option verbose Default: 0 --nboo ? This is option nboo --boo ? This is option boo --foo, -f FOO ? This is option foo Some subcommands: there are some subcommands help display help information about usage.t list this is the list subcommand message list (ls): this is the list subcommand message usage: list NAME [NAME2] --boo|-b [--help|-h] [--foo|-f] Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum ac diam iaculis, consectetur nunc sit amet, vulputate lacus. Suspendisse vitae felis nisl. Sed posuere aliquet placerat. Nunc eget sollicitudin eros, quis porta nunc. Mauris laoreet lacinia aliquet. Cras porttitor erat ac elit semper blandit. Vestibulum porttitor nulla id nisl eleifend venenatis. In hac habitasse platea dictumst. Cras ut leo rhoncus, bibendum lectus at, hendrerit tortor. Etiam congue ligula magna, nec malesuada lorem semper ac. Sed luctus malesuada felis, in mollis lectus aliquam ut. Ut adipiscing massa id felis interdum semper sit amet in leo. Morbi imperdiet fringilla sodales. Donec at ipsum eu lorem lacinia pharetra eu non quam. Duis a porttitor nulla. In hac habitasse platea dictumst. Aenean hendrerit sit amet quam nec malesuada. Vivamus lobortis placerat diam, a lobortis ante sollicitudin vel. Cras ullamcorper enim urna, non dignissim velit iaculis id. Sed odio libero, hendrerit sed blandit eget, luctus ut velit. Suspendisse lobortis ullamcorper magna at tincidunt. In hac habitasse platea dictumst. Curabitur accumsan, massa vitae rutrum euismod, quam purus ultrices lectus, sed sodales metus sem sed nulla. Vestibulum tincidunt ligula eget enim pulvinar, non condimentum turpis dignissim. Maecenas sed nulla eu lorem dictum semper. Nulla fringilla egestas nibh vitae blandit. In vitae arcu accumsan turpis commodo varius. Pellentesque id massa ligula. Vestibulum pharetra, metus in semper rutrum, odio urna vulputate magna, nec tristique sem arcu sit amet dui. Suspendisse nec risus consequat, rhoncus tellus vitae, tincidunt augue. Suspendisse cursus felis nulla, non luctus lorem pharetra quis. Nunc pulvinar lectus enim, sit amet interdum felis ultrices vel. Vestibulum neque metus, condimentum eget convallis nec, euismod vitae nunc. Proin sagittis ullamcorper risus, vel rutrum turpis posuere eu. required positional arguments: NAME positional NAME optional positional arguments: NAME2 ? positional NAME2 required named arguments: --boo, -b BOO subcommand boo optional named arguments: --help, -h ? show this help message and exit --foo, -f FOO ? subcommand foo t/usage.t ....... ok 1 ok 2 - redefine option ok 3 - dest=boo is used 1..3 ok All tests successful. Files=17, Tests=171, 2 wallclock secs ( 0.06 usr 0.02 sys + 1.60 cusr 0.14 csys = 1.82 CPU) Result: PASS make[1]: Leaving directory '/build/libgetopt-argparse-perl-1.0.6' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libgetopt-argparse-perl/ make -j15 install DESTDIR=/build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libgetopt-argparse-perl-1.0.6' Manifying 6 pod documents Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/perl5/Getopt/ArgParse.pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/perl5/Getopt/ArgParse/ActionAppend.pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/perl5/Getopt/ArgParse/ActionCount.pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/perl5/Getopt/ArgParse/ActionStore.pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/perl5/Getopt/ArgParse/Namespace.pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/perl5/Getopt/ArgParse/Parser.pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/man/man3/Getopt::ArgParse::Parser.3pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/man/man3/Getopt::ArgParse::ActionAppend.3pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/man/man3/Getopt::ArgParse::ActionCount.3pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/man/man3/Getopt::ArgParse::ActionStore.3pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/man/man3/Getopt::ArgParse.3pm Installing /build/libgetopt-argparse-perl-1.0.6/debian/libgetopt-argparse-perl/usr/share/man/man3/Getopt::ArgParse::Namespace.3pm make[1]: Leaving directory '/build/libgetopt-argparse-perl-1.0.6' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libgetopt-argparse-perl' in '../libgetopt-argparse-perl_1.0.6-2_all.deb'. dpkg-genbuildinfo --build=binary -O../libgetopt-argparse-perl_1.0.6-2_i386.buildinfo dpkg-genchanges --build=binary -O../libgetopt-argparse-perl_1.0.6-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/66734/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/66734/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/66734 and its subdirectories I: Current time: Sat Aug 16 20:07:19 +14 2025 I: pbuilder-time-stamp: 1755324439