Thu May 23 01:51:46 UTC 2024 I: starting to build libencode-hanextra-perl/unstable/amd64 on jenkins on '2024-05-23 01:51' Thu May 23 01:51:46 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_36/13374/console.log Thu May 23 01:51:46 UTC 2024 I: Downloading source for unstable/libencode-hanextra-perl=0.23-6 --2024-05-23 01:51:47-- http://deb.debian.org/debian/pool/main/libe/libencode-hanextra-perl/libencode-hanextra-perl_0.23-6.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2194 (2.1K) [text/prs.lines.tag] Saving to: ‘libencode-hanextra-perl_0.23-6.dsc’ 0K .. 100% 321M=0s 2024-05-23 01:51:47 (321 MB/s) - ‘libencode-hanextra-perl_0.23-6.dsc’ saved [2194/2194] Thu May 23 01:51:47 UTC 2024 I: libencode-hanextra-perl_0.23-6.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libencode-hanextra-perl Binary: libencode-hanextra-perl Architecture: any Version: 0.23-6 Maintainer: Debian Perl Group Uploaders: Florian Schlichting Homepage: https://metacpan.org/release/Encode-HanExtra Standards-Version: 4.1.3 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libencode-hanextra-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libencode-hanextra-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libmodule-install-perl, perl-xs-dev, perl:native Package-List: libencode-hanextra-perl deb perl optional arch=any Checksums-Sha1: 52d64ecaf29f38d9b04957caeb5da3ef62590336 1566682 libencode-hanextra-perl_0.23.orig.tar.gz 922dd56d5057bb6297a8b0e95f9dd6233d81bb3f 4248 libencode-hanextra-perl_0.23-6.debian.tar.xz Checksums-Sha256: 1fd4b06cada70858003af153f94c863b3b95f2e3d03ba18d0451a81d51db443a 1566682 libencode-hanextra-perl_0.23.orig.tar.gz ed7edcae11b7889175d510a2373c7ada62061e6605893d5dd8358fc54a45357f 4248 libencode-hanextra-perl_0.23-6.debian.tar.xz Files: e1d3bc32c1c8ee304235a06fbcd5d5a4 1566682 libencode-hanextra-perl_0.23.orig.tar.gz 16ffb90fe5a2d62743fc591795b488cd 4248 libencode-hanextra-perl_0.23-6.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKnnpQACgkQV5wWDUye I+hKrQ/8DEIKkVib96DNi14WBD4EndZFuCgEoIBO7zUuaojBRGK8kHrFSY42YwiK hnxXLmi/eJkXnQrFtjFC1fPryH7Q2dtqBozULoOx78DXxN0dz3Z2pcZsQfqsUIMV BVYGY0cM7KiTpqk5VkpYNEZIMvF/q9JkSslpdGPYlzmVc5eTQAQUHndCeB5mjGoP 9hhCsPcyQY/3cIYXIPccffPA2jLRDP+7bYgJlOaF1omVtXMV02oDhd0YMocsLLTv hz7l4KnwXHeT1sb2qrMpHDqvu33xqst/xOa1IREl+tMihyMdTsUBDnY67gvkzXYG S+So8DcX6XvUNJ+7kUot1ve9j0KKZxKMxpKPASbkPFkuYc/t9eupZ7npxhTDSxYC rly8rs1jImHzt34Oo76RxshTlGBC2M9W82bYU10xwfPrCZ16hBsyvMyXEoK5+4SH +sVwxy3RJd7xyfnGf1Uc+4+0U4YH+k7k3V8jTiMxAQDUh9qtAQsy7F6JYYFw4rD+ S0JYi1mOCCrQWM+0NYXoOkST4xTxhxjmhDvWon4B1SiwS9G6feQ5cWUTAtcoGzH9 nrUWQP/A93KuHoyUEk/ZHU4qX7ojPmfdve46NyIKVzcdZtAgmReO6bzdZ7zR39+I a0u22SNrTpziz9qk3Cbxv4klQpUdVeLdSSHIy9FKmUGyNJ3Y494= =s0Rj -----END PGP SIGNATURE----- Thu May 23 01:51:47 UTC 2024 I: Checking whether the package is not for us Thu May 23 01:51:47 UTC 2024 I: Starting 1st build on remote node infom02-amd64.debian.net. Thu May 23 01:51:47 UTC 2024 I: Preparing to do remote build '1' on infom02-amd64.debian.net. Thu May 23 01:52:43 UTC 2024 I: Deleting $TMPDIR on infom02-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Jun 24 20:14:49 -12 2025 I: pbuilder-time-stamp: 1750839289 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libencode-hanextra-perl_0.23-6.dsc] I: copying [./libencode-hanextra-perl_0.23.orig.tar.gz] I: copying [./libencode-hanextra-perl_0.23-6.debian.tar.xz] I: Extracting source gpgv: Signature made Mon Jun 13 20:31:16 2022 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libencode-hanextra-perl_0.23-6.dsc: no acceptable signature found dpkg-source: info: extracting libencode-hanextra-perl in libencode-hanextra-perl-0.23 dpkg-source: info: unpacking libencode-hanextra-perl_0.23.orig.tar.gz dpkg-source: info: unpacking libencode-hanextra-perl_0.23-6.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fix-sparse-tw-docs.patch dpkg-source: info: applying 0001-Make-the-build-reproducible-by-sorting-hash-keys-in-.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3965107/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='97d0e985b9094090bc96ee6e07f804f3' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3965107' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.ojeaofGB/pbuilderrc_HhVQ --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.ojeaofGB/b1 --logfile b1/build.log libencode-hanextra-perl_0.23-6.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' I: uname -a Linux infom02-amd64 6.7.12+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.7.12-1~bpo12+1 (2024-05-06) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 24 14:05 /bin -> usr/bin I: user script /srv/workspace/pbuilder/3965107/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmodule-install-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19718 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-perl; however: Package libmodule-install-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdata-optlist-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libmodule-install-perl{a} libmodule-scandeps-perl{a} libparams-util-perl{a} libperl-dev{a} libpipeline1{a} libsub-exporter-perl{a} libsub-install-perl{a} libsub-override-perl{a} libsub-prototype-perl{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-tiny-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfile-homedir-perl libjson-perl libltdl-dev libmail-sendmail-perl libpar-dist-perl libwww-perl lynx wget 0 packages upgraded, 40 newly installed, 0 to remove and 0 not upgraded. Need to get 20.5 MB of archives. After unpacking 79.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.22 [22.4 kB] Get: 2 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get: 3 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get: 4 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get: 5 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.21-14+b1 [161 kB] Get: 6 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get: 7 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-4 [1180 kB] Get: 8 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.40.1-1 [94.1 kB] Get: 9 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get: 10 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.12.1-1 [1411 kB] Get: 11 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 12 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.21-14 [496 kB] Get: 16 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 17 http://deb.debian.org/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get: 18 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian unstable/main amd64 libparams-util-perl amd64 1.102-3 [24.0 kB] Get: 21 http://deb.debian.org/debian unstable/main amd64 libsub-install-perl all 0.929-1 [10.5 kB] Get: 22 http://deb.debian.org/debian unstable/main amd64 libdata-optlist-perl all 0.114-1 [10.6 kB] Get: 23 http://deb.debian.org/debian unstable/main amd64 libsub-exporter-perl all 0.990-1 [50.6 kB] Get: 24 http://deb.debian.org/debian unstable/main amd64 libsub-prototype-perl amd64 0.03-2+b2 [9744 B] Get: 25 http://deb.debian.org/debian unstable/main amd64 libsub-override-perl all 0.11-1 [10.4 kB] Get: 26 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 27 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 28 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.191-1+b1 [189 kB] Get: 29 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 30 http://deb.debian.org/debian unstable/main amd64 libicu72 amd64 72.1-4+b1 [9395 kB] Get: 31 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.9.14+dfsg-1.3+b3 [692 kB] Get: 32 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.21-14+b1 [1301 kB] Get: 33 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 34 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 35 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.15.3 [901 kB] Get: 36 http://deb.debian.org/debian unstable/main amd64 libfile-remove-perl all 1.61-2 [16.1 kB] Get: 37 http://deb.debian.org/debian unstable/main amd64 libmodule-scandeps-perl all 1.35-1 [43.7 kB] Get: 38 http://deb.debian.org/debian unstable/main amd64 libyaml-tiny-perl all 1.74-1 [30.7 kB] Get: 39 http://deb.debian.org/debian unstable/main amd64 libmodule-install-perl all 1.21-2 [139 kB] Get: 40 http://deb.debian.org/debian unstable/main amd64 libperl-dev amd64 5.38.2-4 [1087 kB] Fetched 20.5 MB in 2s (11.0 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19718 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_amd64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_amd64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.1-1_amd64.deb ... Unpacking bsdextrautils (2.40.1-1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_amd64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../19-libparams-util-perl_1.102-3_amd64.deb ... Unpacking libparams-util-perl (1.102-3) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../20-libsub-install-perl_0.929-1_all.deb ... Unpacking libsub-install-perl (0.929-1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../21-libdata-optlist-perl_0.114-1_all.deb ... Unpacking libdata-optlist-perl (0.114-1) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../22-libsub-exporter-perl_0.990-1_all.deb ... Unpacking libsub-exporter-perl (0.990-1) ... Selecting previously unselected package libsub-prototype-perl. Preparing to unpack .../23-libsub-prototype-perl_0.03-2+b2_amd64.deb ... Unpacking libsub-prototype-perl (0.03-2+b2) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../24-libsub-override-perl_0.11-1_all.deb ... Unpacking libsub-override-perl (0.11-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../25-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../26-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../27-libelf1t64_0.191-1+b1_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../28-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../29-libicu72_72.1-4+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-4+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../30-libxml2_2.9.14+dfsg-1.3+b3_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../31-gettext_0.21-14+b1_amd64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../32-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../33-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../34-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../35-libfile-remove-perl_1.61-2_all.deb ... Unpacking libfile-remove-perl (1.61-2) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../36-libmodule-scandeps-perl_1.35-1_all.deb ... Unpacking libmodule-scandeps-perl (1.35-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../37-libyaml-tiny-perl_1.74-1_all.deb ... Unpacking libyaml-tiny-perl (1.74-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../38-libmodule-install-perl_1.21-2_all.deb ... Unpacking libmodule-install-perl (1.21-2) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../39-libperl-dev_5.38.2-4_amd64.deb ... Unpacking libperl-dev:amd64 (5.38.2-4) ... Setting up libfile-remove-perl (1.61-2) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:amd64 (5.38.2-4) ... Setting up file (1:5.45-3) ... Setting up libyaml-tiny-perl (1.74-1) ... Setting up libsub-install-perl (0.929-1) ... Setting up libelf1t64:amd64 (0.191-1+b1) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up libparams-util-perl (1.102-3) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.3+b3) ... Setting up libmodule-scandeps-perl (1.35-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libmodule-install-perl (1.21-2) ... Setting up libdata-optlist-perl (0.114-1) ... Setting up groff-base (1.23.0-4) ... Setting up libsub-exporter-perl (0.990-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libsub-prototype-perl (0.03-2+b2) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libsub-override-perl (0.11-1) ... Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up debhelper (13.15.3) ... Processing triggers for libc-bin (2.38-11) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libencode-hanextra-perl-0.23/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libencode-hanextra-perl_0.23-6_source.changes dpkg-buildpackage: info: source package libencode-hanextra-perl dpkg-buildpackage: info: source version 0.23-6 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" enc2xs is /usr/bin/enc2xs encode.h is at /usr/share/perl/5.38/Encode Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Encode::HanExtra Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libencode-hanextra-perl-0.23' Running Mkbootstrap for HanExtra () "/usr/bin/perl" "-Iinc" /usr/bin/enc2xs -"Q" -o Big5_t.c -f Big5_t.fnm "/usr/bin/perl" "-Iinc" /usr/bin/enc2xs -"Q" -o CCCII_t.c -f CCCII_t.fnm chmod 644 "HanExtra.bs" "/usr/bin/perl" "-Iinc" /usr/bin/enc2xs -"Q" -o CNS11643_t.c -f CNS11643_t.fnm "/usr/bin/perl" "-Iinc" /usr/bin/enc2xs -"Q" -o EUC_TW_t.c -f EUC_TW_t.fnm "/usr/bin/perl" "-Iinc" /usr/bin/enc2xs -"Q" -o GB18030_t.c -f GB18030_t.fnm "/usr/bin/perl" "-Iinc" /usr/bin/enc2xs -"Q" -o Unisys_t.c -f Unisys_t.fnm "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- HanExtra.bs blib/arch/auto/Encode/HanExtra/HanExtra.bs 644 cp lib/Encode/HanExtra.pm blib/lib/Encode/HanExtra.pm cp lib/Encode/TW/Unisys/SOSI2.pm blib/lib/Encode/TW/Unisys/SOSI2.pm cp lib/Encode/TW/Unisys/SOSI1.pm blib/lib/Encode/TW/Unisys/SOSI1.pm Reading unisys (unisys) x86_64-linux-gnu-gcc -c -I/usr/share/perl/5.38/Encode -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.23\" -DXS_VERSION=\"0.23\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.38/CORE" Unisys_t.c Reading big5-1984 (big5-1984) Reading big5-2003 (big5-2003) Reading big5ext (big5ext) Reading big5plus (big5plus) x86_64-linux-gnu-gcc -c -I/usr/share/perl/5.38/Encode -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.23\" -DXS_VERSION=\"0.23\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.38/CORE" Big5_t.c Reading gb18030 (gb18030) x86_64-linux-gnu-gcc -c -I/usr/share/perl/5.38/Encode -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.23\" -DXS_VERSION=\"0.23\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.38/CORE" GB18030_t.c Reading euc-tw (euc-tw) x86_64-linux-gnu-gcc -c -I/usr/share/perl/5.38/Encode -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.23\" -DXS_VERSION=\"0.23\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.38/CORE" EUC_TW_t.c Reading cns11643-1 (cns11643-1) Reading cns11643-2 (cns11643-2) Reading cns11643-3 (cns11643-3) Reading cns11643-4 (cns11643-4) Reading cns11643-5 (cns11643-5) Reading cns11643-6 (cns11643-6) Reading cns11643-7 (cns11643-7) Reading cns11643-f (cns11643-f) x86_64-linux-gnu-gcc -c -I/usr/share/perl/5.38/Encode -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.23\" -DXS_VERSION=\"0.23\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.38/CORE" CNS11643_t.c Reading cccii (cccii) x86_64-linux-gnu-gcc -c -I/usr/share/perl/5.38/Encode -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.23\" -DXS_VERSION=\"0.23\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.38/CORE" CCCII_t.c "/usr/bin/perl" "-Iinc" "/usr/share/perl/5.38/ExtUtils/xsubpp" -nolinenumbers -typemap '/usr/share/perl/5.38/ExtUtils/typemap' HanExtra.xs > HanExtra.xsc mv HanExtra.xsc HanExtra.c x86_64-linux-gnu-gcc -c -I/usr/share/perl/5.38/Encode -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.23\" -DXS_VERSION=\"0.23\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.38/CORE" HanExtra.c rm -f blib/arch/auto/Encode/HanExtra/HanExtra.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libencode-hanextra-perl-0.23=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Big5_t.o CCCII_t.o CNS11643_t.o EUC_TW_t.o GB18030_t.o HanExtra.o Unisys_t.o -o blib/arch/auto/Encode/HanExtra/HanExtra.so \ \ chmod 755 blib/arch/auto/Encode/HanExtra/HanExtra.so Manifying 3 pod documents make[1]: Leaving directory '/build/reproducible-path/libencode-hanextra-perl-0.23' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libencode-hanextra-perl-0.23' "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- HanExtra.bs blib/arch/auto/Encode/HanExtra/HanExtra.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/0-signature.t .. 1..1 ok 1 # skip set the environment variable TEST_SIGNATURE to enable this test ok t/1-basic.t ...... 1..16 ok 1 - use Encode; ok 2 - use Encode::HanExtra; ok 3 - big5-1984 - decode ok 4 - big5-1984 - encode ok 5 - big5ext - decode ok 6 - big5ext - encode ok 7 - big5plus - decode ok 8 - big5plus - encode ok 9 - cccii - decode ok 10 - cccii - encode ok 11 - cns11643-1 - decode ok 12 - cns11643-1 - encode ok 13 - euc-tw - decode ok 14 - euc-tw - encode ok 15 - gb18030 - decode ok 16 - gb18030 - encode ok t/2-alias.t ...... 1..12 # alias test ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=3, Tests=29, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.12 cusr 0.04 csys = 0.19 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libencode-hanextra-perl-0.23' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libencode-hanextra-perl/ make -j12 install DESTDIR=/build/reproducible-path/libencode-hanextra-perl-0.23/debian/libencode-hanextra-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libencode-hanextra-perl-0.23' "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- HanExtra.bs blib/arch/auto/Encode/HanExtra/HanExtra.bs 644 Manifying 3 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libencode-hanextra-perl-0.23/debian/libencode-hanextra-perl/usr/lib/x86_64-linux-gnu/perl5/5.38/auto/Encode/HanExtra/HanExtra.so Installing /build/reproducible-path/libencode-hanextra-perl-0.23/debian/libencode-hanextra-perl/usr/lib/x86_64-linux-gnu/perl5/5.38/Encode/HanExtra.pm Installing /build/reproducible-path/libencode-hanextra-perl-0.23/debian/libencode-hanextra-perl/usr/lib/x86_64-linux-gnu/perl5/5.38/Encode/TW/Unisys/SOSI2.pm Installing /build/reproducible-path/libencode-hanextra-perl-0.23/debian/libencode-hanextra-perl/usr/lib/x86_64-linux-gnu/perl5/5.38/Encode/TW/Unisys/SOSI1.pm Installing /build/reproducible-path/libencode-hanextra-perl-0.23/debian/libencode-hanextra-perl/usr/share/man/man3/Encode::HanExtra.3pm Installing /build/reproducible-path/libencode-hanextra-perl-0.23/debian/libencode-hanextra-perl/usr/share/man/man3/Encode::TW::Unisys::SOSI2.3pm Installing /build/reproducible-path/libencode-hanextra-perl-0.23/debian/libencode-hanextra-perl/usr/share/man/man3/Encode::TW::Unisys::SOSI1.3pm make[1]: Leaving directory '/build/reproducible-path/libencode-hanextra-perl-0.23' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libencode-hanextra-perl' in '../libencode-hanextra-perl_0.23-6_amd64.deb'. dpkg-deb: building package 'libencode-hanextra-perl-dbgsym' in '../libencode-hanextra-perl-dbgsym_0.23-6_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libencode-hanextra-perl_0.23-6_amd64.buildinfo dpkg-genchanges --build=binary -O../libencode-hanextra-perl_0.23-6_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3965107 and its subdirectories I: Current time: Tue Jun 24 20:15:42 -12 2025 I: pbuilder-time-stamp: 1750839342 Thu May 23 01:52:44 UTC 2024 I: 1st build successful. Starting 2nd build on remote node infom01-amd64.debian.net. Thu May 23 01:52:44 UTC 2024 I: Preparing to do remote build '2' on infom01-amd64.debian.net. Thu May 23 01:53:55 UTC 2024 I: Deleting $TMPDIR on infom01-amd64.debian.net. Thu May 23 01:53:55 UTC 2024 I: libencode-hanextra-perl_0.23-6_amd64.changes: Format: 1.8 Date: Mon, 13 Jun 2022 21:30:24 +0100 Source: libencode-hanextra-perl Binary: libencode-hanextra-perl libencode-hanextra-perl-dbgsym Architecture: amd64 Version: 0.23-6 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libencode-hanextra-perl - perl module providing extra sets of Chinese character encodings Changes: libencode-hanextra-perl (0.23-6) unstable; urgency=medium . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Debian Janitor ] * Bump debhelper from old 11 to 12. * Set debhelper-compat version in Build-Depends. . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. Checksums-Sha1: 64a39f9e43f007b20074bd23eebc698a806a329b 279348 libencode-hanextra-perl-dbgsym_0.23-6_amd64.deb cd776209b5d08c0d70c8a48127d3a8db4ff4fe99 5483 libencode-hanextra-perl_0.23-6_amd64.buildinfo e731bee27bc00bca51d9f05136942f28c08c1425 1515336 libencode-hanextra-perl_0.23-6_amd64.deb Checksums-Sha256: 421943f6be92435571c4ae4374d79c50df523521abd38a278c8b35ec951a30f3 279348 libencode-hanextra-perl-dbgsym_0.23-6_amd64.deb 8d117bb734297828d55d0f648e00bd2530c8bac76da42981c0e595b7e37d24ff 5483 libencode-hanextra-perl_0.23-6_amd64.buildinfo 7a259d8b490daed1c6be1758b3c5d8e85338c7d7b71448d50ad0231098e60a15 1515336 libencode-hanextra-perl_0.23-6_amd64.deb Files: b6b5c16f9823623b52ea2a1c405dfbc2 279348 debug optional libencode-hanextra-perl-dbgsym_0.23-6_amd64.deb dbfe825cb84dea88a43d4ef2cdf3ec44 5483 perl optional libencode-hanextra-perl_0.23-6_amd64.buildinfo cffb4f6078d8474870e287e24fb6b1a4 1515336 perl optional libencode-hanextra-perl_0.23-6_amd64.deb Thu May 23 01:53:57 UTC 2024 I: diffoscope 266 will be used to compare the two builds: Running as unit: rb-diffoscope-amd64_36-13374.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.ojeaofGB/libencode-hanextra-perl_0.23-6.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.ojeaofGB/libencode-hanextra-perl_0.23-6.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.ojeaofGB/libencode-hanextra-perl_0.23-6.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.ojeaofGB/b1/libencode-hanextra-perl_0.23-6_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.ojeaofGB/b2/libencode-hanextra-perl_0.23-6_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.379s) 0.379s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.035s) 0.035s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 782ms CPU time consumed: 778ms Thu May 23 01:53:58 UTC 2024 I: diffoscope 266 found no differences in the changes files, and a .buildinfo file also exists. Thu May 23 01:53:58 UTC 2024 I: libencode-hanextra-perl from unstable built successfully and reproducibly on amd64. Thu May 23 01:54:00 UTC 2024 I: Submitting .buildinfo files to external archives: Thu May 23 01:54:00 UTC 2024 I: Submitting 8.0K b1/libencode-hanextra-perl_0.23-6_amd64.buildinfo.asc Thu May 23 01:54:01 UTC 2024 I: Submitting 8.0K b2/libencode-hanextra-perl_0.23-6_amd64.buildinfo.asc Thu May 23 01:54:02 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu May 23 01:54:02 UTC 2024 I: Done submitting .buildinfo files. Thu May 23 01:54:02 UTC 2024 I: Removing signed libencode-hanextra-perl_0.23-6_amd64.buildinfo.asc files: removed './b1/libencode-hanextra-perl_0.23-6_amd64.buildinfo.asc' removed './b2/libencode-hanextra-perl_0.23-6_amd64.buildinfo.asc'