Sat May 25 20:25:04 UTC 2024 I: starting to build glogic/unstable/amd64 on jenkins on '2024-05-25 20:24' Sat May 25 20:25:04 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_36/13876/console.log Sat May 25 20:25:04 UTC 2024 I: Downloading source for unstable/glogic=2.6-6 --2024-05-25 20:25:05-- http://deb.debian.org/debian/pool/main/g/glogic/glogic_2.6-6.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1851 (1.8K) [text/prs.lines.tag] Saving to: ‘glogic_2.6-6.dsc’ 0K . 100% 196M=0s 2024-05-25 20:25:05 (196 MB/s) - ‘glogic_2.6-6.dsc’ saved [1851/1851] Sat May 25 20:25:05 UTC 2024 I: glogic_2.6-6.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: glogic Binary: glogic Architecture: all Version: 2.6-6 Maintainer: Debian QA Group Homepage: https://launchpad.net/glogic Standards-Version: 4.6.0 Vcs-Browser: https://salsa.debian.org/debian/glogic Vcs-Git: https://salsa.debian.org/debian/glogic.git Build-Depends: debhelper-compat (= 13), dh-python, intltool, libglib2.0-dev, python3, yelp-tools Package-List: glogic deb electronics optional arch=all Checksums-Sha1: 4f0c134103cbca75efe9c9ddb2be8c2619655899 270951 glogic_2.6.orig.tar.gz f182a2cf57d753772b72087cb569e2153824983b 5144 glogic_2.6-6.debian.tar.xz Checksums-Sha256: 62fabbc39aa7d72491fb83aa0547385cbb89d7a593ad2fb80b019607593d1bde 270951 glogic_2.6.orig.tar.gz 1885eabf3e833102b864b84bd41ded5f2020932ae4b453ef1d8987372a92c8fe 5144 glogic_2.6-6.debian.tar.xz Files: 10a31b7fc08f659e5d439d9afcd877bc 270951 glogic_2.6.orig.tar.gz 398dbc7d1e9b1a3e36a9aaf87a0ca371 5144 glogic_2.6-6.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEkjZVexcMh/iCHArDweDZLphvfH4FAmGT314ACgkQweDZLphv fH5nxg//aDg+pO1Rsqq9kPaCn8+J8X0LDgANYQVsbRifCH9gZHMCnnWgSJZPztYl bZ/DT2dHqAcBqDZ290PsUOxcGtQWrKrM+yqnea8DFxOOal/yXNOEvoy0j9wY8zjB /Mw6z+EwBgGQ9HafI7seb5xo2VJAHiURQLmLDsL4pSqq636V9IBNCGcTLKORMxhK 3fer6WcqhK8GHk+ltuvRSKZNlLjZ62FqXYipTz/LrMgTs6xAerKtx+sfg6GKcWND JVnTOT/Vg+17e4IQ0wD+v0LbFMEYNsCTPwm0VvCfveqni9neQwU9BIbpoENhn9Cf WK8/u7drdqpdPM/FUA0lOy137b0px/6VyBq+p9IIfW9wvh+l1GMBpVVUxoAz/zv/ pUkp0c7Sbxe1x+/cXRYvRPfZrJrGQ/1rVDRSe8o0FsxC9VTe7jclNRQ27CNIzU2a DG1MahqUkhfPCJjIKXVxPPLEOnR3P5zHpM3rQFWnMzZc6PS9OlxqWEUij0ia/vJg 8cjDJ837v0rji1S2iDYDSJoGcWJ5jH/QcZYT37tAGIFEXSUYZDI6MatwOy6VjpIt GSC7KC6Iv9HwH3b/rCgofxEZriE8+ImcqWRbodAo/6kolX5NByQg8jmZPL4xpSZc PP++ZpOlwvDU2GitDabF91Ryd6au0x6SGKEpax7+l2nGNd1fRZc= =CqHk -----END PGP SIGNATURE----- Sat May 25 20:25:05 UTC 2024 I: Checking whether the package is not for us Sat May 25 20:25:05 UTC 2024 I: Starting 1st build on remote node infom02-amd64.debian.net. Sat May 25 20:25:05 UTC 2024 I: Preparing to do remote build '1' on infom02-amd64.debian.net. Sat May 25 20:26:24 UTC 2024 I: Deleting $TMPDIR on infom02-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Jun 27 14:48:07 -12 2025 I: pbuilder-time-stamp: 1751078887 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [glogic_2.6-6.dsc] I: copying [./glogic_2.6.orig.tar.gz] I: copying [./glogic_2.6-6.debian.tar.xz] I: Extracting source gpgv: Signature made Tue Nov 16 16:42:06 2021 gpgv: using RSA key 9236557B170C87F8821C0AC3C1E0D92E986F7C7E gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./glogic_2.6-6.dsc: no acceptable signature found dpkg-source: info: extracting glogic in glogic-2.6 dpkg-source: info: unpacking glogic_2.6.orig.tar.gz dpkg-source: info: unpacking glogic_2.6-6.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 104_remove-duplicated-autoconf-macro.patch dpkg-source: info: applying 103_erase-link-to-external-website.patch dpkg-source: info: applying 102_add-Keywords-field.patch dpkg-source: info: applying 101_fix-Display-not-updated-no.patch dpkg-source: info: applying 100_fix-attr-error-for-py33.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1495565/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='unstable' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='22524bc778024b29b757db811e6e63dc' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1495565' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.RbUJqpll/pbuilderrc_vtPH --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.RbUJqpll/b1 --logfile b1/build.log glogic_2.6-6.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' I: uname -a Linux infom02-amd64 6.7.12+bpo-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.7.12-1~bpo12+1 (2024-05-06) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 26 14:05 /bin -> usr/bin I: user script /srv/workspace/pbuilder/1495565/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-python, intltool, libglib2.0-dev, python3, yelp-tools dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19718 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on intltool; however: Package intltool is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on python3; however: Package python3 is not installed. pbuilder-satisfydepends-dummy depends on yelp-tools; however: Package yelp-tools is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool{a} intltool-debian{a} itstool{a} libarchive-zip-perl{a} libblkid-dev{a} libclone-perl{a} libdebhelper-perl{a} libelf1t64{a} libencode-locale-perl{a} libexpat1{a} libffi-dev{a} libfile-listing-perl{a} libfile-stripnondeterminism-perl{a} libgirepository-2.0-0{a} libglib2.0-0t64{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libhtml-tree-perl{a} libhttp-cookies-perl{a} libhttp-date-perl{a} libhttp-message-perl{a} libhttp-negotiate-perl{a} libicu72{a} libio-html-perl{a} libio-socket-ssl-perl{a} liblwp-mediatypes-perl{a} liblwp-protocol-https-perl{a} libmagic-mgc{a} libmagic1t64{a} libmount-dev{a} libnet-http-perl{a} libnet-ssleay-perl{a} libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix3{a} libpipeline1{a} libpkgconf3{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline8t64{a} libselinux1-dev{a} libsepol-dev{a} libsysprof-capture-4-dev{a} libtimedate-perl{a} libtool{a} libtry-tiny-perl{a} libuchardet0{a} liburi-perl{a} libwww-perl{a} libwww-robotrules-perl{a} libxml-parser-perl{a} libxml2{a} libxml2-utils{a} libxslt1.1{a} m4{a} mallard-rng{a} man-db{a} media-types{a} netbase{a} openssl{a} perl-openssl-defaults{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-libxml2{a} python3-lxml{a} python3-minimal{a} python3-packaging{a} python3-pkg-resources{a} python3-setuptools{a} python3.11{a} python3.11-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} tzdata{a} uuid-dev{a} xml-core{a} xsltproc{a} yelp-tools{a} yelp-xsl{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libdata-dump-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libio-compress-brotli-perl libltdl-dev libmail-sendmail-perl libmailtools-perl lynx python3-bs4 python3-cssselect python3-html5lib shared-mime-info wget xdg-user-dirs yelp zip 0 packages upgraded, 106 newly installed, 0 to remove and 0 not upgraded. Need to get 40.5 MB of archives. After unpacking 160 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian unstable/main amd64 libpython3.11-minimal amd64 3.11.9-1 [817 kB] Get: 2 http://deb.debian.org/debian unstable/main amd64 libexpat1 amd64 2.6.2-1 [103 kB] Get: 3 http://deb.debian.org/debian unstable/main amd64 python3.11-minimal amd64 3.11.9-1 [1879 kB] Get: 4 http://deb.debian.org/debian unstable/main amd64 python3-minimal amd64 3.11.8-1 [26.3 kB] Get: 5 http://deb.debian.org/debian unstable/main amd64 media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian unstable/main amd64 netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian unstable/main amd64 tzdata all 2024a-4 [255 kB] Get: 8 http://deb.debian.org/debian unstable/main amd64 readline-common all 8.2-4 [69.3 kB] Get: 9 http://deb.debian.org/debian unstable/main amd64 libreadline8t64 amd64 8.2-4 [167 kB] Get: 10 http://deb.debian.org/debian unstable/main amd64 libpython3.11-stdlib amd64 3.11.9-1 [1792 kB] Get: 11 http://deb.debian.org/debian unstable/main amd64 python3.11 amd64 3.11.9-1 [602 kB] Get: 12 http://deb.debian.org/debian unstable/main amd64 libpython3-stdlib amd64 3.11.8-1 [9332 B] Get: 13 http://deb.debian.org/debian unstable/main amd64 python3 amd64 3.11.8-1 [27.4 kB] Get: 14 http://deb.debian.org/debian unstable/main amd64 sgml-base all 1.31 [15.4 kB] Get: 15 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.22 [22.4 kB] Get: 16 http://deb.debian.org/debian unstable/main amd64 openssl amd64 3.2.1-3 [1360 kB] Get: 17 http://deb.debian.org/debian unstable/main amd64 ca-certificates all 20240203 [158 kB] Get: 18 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get: 19 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get: 20 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get: 21 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.21-14+b1 [161 kB] Get: 22 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get: 23 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-4 [1180 kB] Get: 24 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.40.1-1 [94.1 kB] Get: 25 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get: 26 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.12.1-1 [1411 kB] Get: 27 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get: 28 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.71-3 [332 kB] Get: 29 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 30 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get: 31 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.21-14 [496 kB] Get: 32 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.15.3 [88.0 kB] Get: 33 http://deb.debian.org/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get: 34 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 35 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 36 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 37 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 38 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.191-1+b1 [189 kB] Get: 39 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 40 http://deb.debian.org/debian unstable/main amd64 libicu72 amd64 72.1-4+b1 [9395 kB] Get: 41 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-1 [669 kB] Get: 42 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.21-14+b1 [1301 kB] Get: 43 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 44 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 45 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.15.3 [901 kB] Get: 46 http://deb.debian.org/debian unstable/main amd64 python3-pkg-resources all 68.1.2-2 [241 kB] Get: 47 http://deb.debian.org/debian unstable/main amd64 python3-lib2to3 all 3.12.3-1 [77.6 kB] Get: 48 http://deb.debian.org/debian unstable/main amd64 python3-distutils all 3.12.3-1 [131 kB] Get: 49 http://deb.debian.org/debian unstable/main amd64 python3-setuptools all 68.1.2-2 [468 kB] Get: 50 http://deb.debian.org/debian unstable/main amd64 dh-python all 6.20240422 [107 kB] Get: 51 http://deb.debian.org/debian unstable/main amd64 liburi-perl all 5.28-1 [98.6 kB] Get: 52 http://deb.debian.org/debian unstable/main amd64 libencode-locale-perl all 1.05-3 [12.9 kB] Get: 53 http://deb.debian.org/debian unstable/main amd64 libtimedate-perl all 2.3300-2 [39.3 kB] Get: 54 http://deb.debian.org/debian unstable/main amd64 libhttp-date-perl all 6.06-1 [10.7 kB] Get: 55 http://deb.debian.org/debian unstable/main amd64 libfile-listing-perl all 6.16-1 [12.4 kB] Get: 56 http://deb.debian.org/debian unstable/main amd64 libhtml-tagset-perl all 3.24-1 [14.7 kB] Get: 57 http://deb.debian.org/debian unstable/main amd64 libhtml-parser-perl amd64 3.82-1 [98.9 kB] Get: 58 http://deb.debian.org/debian unstable/main amd64 libhtml-tree-perl all 5.07-3 [211 kB] Get: 59 http://deb.debian.org/debian unstable/main amd64 libclone-perl amd64 0.46-1+b2 [13.7 kB] Get: 60 http://deb.debian.org/debian unstable/main amd64 libio-html-perl all 1.004-3 [16.2 kB] Get: 61 http://deb.debian.org/debian unstable/main amd64 liblwp-mediatypes-perl all 6.04-2 [20.2 kB] Get: 62 http://deb.debian.org/debian unstable/main amd64 libhttp-message-perl all 6.45-1 [82.0 kB] Get: 63 http://deb.debian.org/debian unstable/main amd64 libhttp-cookies-perl all 6.11-1 [19.1 kB] Get: 64 http://deb.debian.org/debian unstable/main amd64 libhttp-negotiate-perl all 6.01-2 [13.1 kB] Get: 65 http://deb.debian.org/debian unstable/main amd64 perl-openssl-defaults amd64 7+b2 [6724 B] Get: 66 http://deb.debian.org/debian unstable/main amd64 libnet-ssleay-perl amd64 1.94-1+b1 [339 kB] Get: 67 http://deb.debian.org/debian unstable/main amd64 libio-socket-ssl-perl all 2.085-1 [218 kB] Get: 68 http://deb.debian.org/debian unstable/main amd64 libnet-http-perl all 6.23-1 [23.9 kB] Get: 69 http://deb.debian.org/debian unstable/main amd64 liblwp-protocol-https-perl all 6.14-1 [10.8 kB] Get: 70 http://deb.debian.org/debian unstable/main amd64 libtry-tiny-perl all 0.31-2 [22.6 kB] Get: 71 http://deb.debian.org/debian unstable/main amd64 libwww-robotrules-perl all 6.02-1 [12.9 kB] Get: 72 http://deb.debian.org/debian unstable/main amd64 libwww-perl all 6.77-1 [183 kB] Get: 73 http://deb.debian.org/debian unstable/main amd64 libxml-parser-perl amd64 2.47-1+b2 [199 kB] Get: 74 http://deb.debian.org/debian unstable/main amd64 intltool all 0.51.0-6 [50.8 kB] Get: 75 http://deb.debian.org/debian unstable/main amd64 python3-libxml2 amd64 2.12.7+dfsg-1 [243 kB] Get: 76 http://deb.debian.org/debian unstable/main amd64 itstool all 2.0.6-3 [40.7 kB] Get: 77 http://deb.debian.org/debian unstable/main amd64 uuid-dev amd64 2.40.1-1 [43.9 kB] Get: 78 http://deb.debian.org/debian unstable/main amd64 libblkid-dev amd64 2.40.1-1 [200 kB] Get: 79 http://deb.debian.org/debian unstable/main amd64 libffi-dev amd64 3.4.6-1 [60.6 kB] Get: 80 http://deb.debian.org/debian unstable/main amd64 libglib2.0-0t64 amd64 2.80.2-2 [1485 kB] Get: 81 http://deb.debian.org/debian unstable/main amd64 libgirepository-2.0-0 amd64 2.80.2-2 [136 kB] Get: 82 http://deb.debian.org/debian unstable/main amd64 libglib2.0-data all 2.80.2-2 [1267 kB] Get: 83 http://deb.debian.org/debian unstable/main amd64 libglib2.0-bin amd64 2.80.2-2 [123 kB] Get: 84 http://deb.debian.org/debian unstable/main amd64 python3-packaging all 24.0-1 [45.5 kB] Get: 85 http://deb.debian.org/debian unstable/main amd64 libglib2.0-dev-bin amd64 2.80.2-2 [170 kB] Get: 86 http://deb.debian.org/debian unstable/main amd64 libsepol-dev amd64 3.5-2+b1 [351 kB] Get: 87 http://deb.debian.org/debian unstable/main amd64 libpcre2-16-0 amd64 10.42-4+b1 [246 kB] Get: 88 http://deb.debian.org/debian unstable/main amd64 libpcre2-32-0 amd64 10.42-4+b1 [234 kB] Get: 89 http://deb.debian.org/debian unstable/main amd64 libpcre2-posix3 amd64 10.42-4+b1 [55.8 kB] Get: 90 http://deb.debian.org/debian unstable/main amd64 libpcre2-dev amd64 10.42-4+b1 [755 kB] Get: 91 http://deb.debian.org/debian unstable/main amd64 libselinux1-dev amd64 3.5-2+b2 [158 kB] Get: 92 http://deb.debian.org/debian unstable/main amd64 libmount-dev amd64 2.40.1-1 [25.9 kB] Get: 93 http://deb.debian.org/debian unstable/main amd64 libsysprof-capture-4-dev amd64 46.0-1 [47.1 kB] Get: 94 http://deb.debian.org/debian unstable/main amd64 libpkgconf3 amd64 1.8.1-1+b2 [36.4 kB] Get: 95 http://deb.debian.org/debian unstable/main amd64 pkgconf-bin amd64 1.8.1-1+b2 [29.7 kB] Get: 96 http://deb.debian.org/debian unstable/main amd64 pkgconf amd64 1.8.1-1+b2 [26.2 kB] Get: 97 http://deb.debian.org/debian unstable/main amd64 zlib1g-dev amd64 1:1.3.dfsg+really1.3.1-1 [919 kB] Get: 98 http://deb.debian.org/debian unstable/main amd64 libglib2.0-dev amd64 2.80.2-2 [1740 kB] Get: 99 http://deb.debian.org/debian unstable/main amd64 libxml2-utils amd64 2.12.7+dfsg-1 [112 kB] Get: 100 http://deb.debian.org/debian unstable/main amd64 libxslt1.1 amd64 1.1.35-1+b1 [232 kB] Get: 101 http://deb.debian.org/debian unstable/main amd64 xml-core all 0.19 [20.1 kB] Get: 102 http://deb.debian.org/debian unstable/main amd64 mallard-rng all 1.1.0-1 [10.3 kB] Get: 103 http://deb.debian.org/debian unstable/main amd64 python3-lxml amd64 5.2.1-1 [1995 kB] Get: 104 http://deb.debian.org/debian unstable/main amd64 xsltproc amd64 1.1.35-1+b1 [115 kB] Get: 105 http://deb.debian.org/debian unstable/main amd64 yelp-xsl all 42.1-2 [469 kB] Get: 106 http://deb.debian.org/debian unstable/main amd64 yelp-tools all 42.1-2 [34.5 kB] Fetched 40.5 MB in 1s (59.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19718 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.9-1_amd64.deb ... Unpacking libpython3.11-minimal:amd64 (3.11.9-1) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../libexpat1_2.6.2-1_amd64.deb ... Unpacking libexpat1:amd64 (2.6.2-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.9-1_amd64.deb ... Unpacking python3.11-minimal (3.11.9-1) ... Setting up libpython3.11-minimal:amd64 (3.11.9-1) ... Setting up libexpat1:amd64 (2.6.2-1) ... Setting up python3.11-minimal (3.11.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20034 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.8-1_amd64.deb ... Unpacking python3-minimal (3.11.8-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024a-4_all.deb ... Unpacking tzdata (2024a-4) ... Selecting previously unselected package readline-common. Preparing to unpack .../4-readline-common_8.2-4_all.deb ... Unpacking readline-common (8.2-4) ... Selecting previously unselected package libreadline8t64:amd64. Preparing to unpack .../5-libreadline8t64_8.2-4_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:amd64 (8.2-4) ... Selecting previously unselected package libpython3.11-stdlib:amd64. Preparing to unpack .../6-libpython3.11-stdlib_3.11.9-1_amd64.deb ... Unpacking libpython3.11-stdlib:amd64 (3.11.9-1) ... Selecting previously unselected package python3.11. Preparing to unpack .../7-python3.11_3.11.9-1_amd64.deb ... Unpacking python3.11 (3.11.9-1) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../8-libpython3-stdlib_3.11.8-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.11.8-1) ... Setting up python3-minimal (3.11.8-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21026 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.8-1_amd64.deb ... Unpacking python3 (3.11.8-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package openssl. Preparing to unpack .../03-openssl_3.2.1-3_amd64.deb ... Unpacking openssl (3.2.1-3) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../04-ca-certificates_20240203_all.deb ... Unpacking ca-certificates (20240203) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../05-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../06-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../07-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../08-gettext-base_0.21-14+b1_amd64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../09-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../10-groff-base_1.23.0-4_amd64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../11-bsdextrautils_2.40.1-1_amd64.deb ... Unpacking bsdextrautils (2.40.1-1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../12-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../13-man-db_2.12.1-1_amd64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../14-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../15-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../16-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../17-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../18-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../19-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../20-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../21-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../22-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../25-libelf1t64_0.191-1+b1_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../27-libicu72_72.1-4+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-4+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../28-libxml2_2.12.7+dfsg-1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg-1) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.21-14+b1_amd64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../33-python3-pkg-resources_68.1.2-2_all.deb ... Unpacking python3-pkg-resources (68.1.2-2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../34-python3-lib2to3_3.12.3-1_all.deb ... Unpacking python3-lib2to3 (3.12.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../35-python3-distutils_3.12.3-1_all.deb ... Unpacking python3-distutils (3.12.3-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../36-python3-setuptools_68.1.2-2_all.deb ... Unpacking python3-setuptools (68.1.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../37-dh-python_6.20240422_all.deb ... Unpacking dh-python (6.20240422) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../38-liburi-perl_5.28-1_all.deb ... Unpacking liburi-perl (5.28-1) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../39-libencode-locale-perl_1.05-3_all.deb ... Unpacking libencode-locale-perl (1.05-3) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../40-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../41-libhttp-date-perl_6.06-1_all.deb ... Unpacking libhttp-date-perl (6.06-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../42-libfile-listing-perl_6.16-1_all.deb ... Unpacking libfile-listing-perl (6.16-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../43-libhtml-tagset-perl_3.24-1_all.deb ... Unpacking libhtml-tagset-perl (3.24-1) ... Selecting previously unselected package libhtml-parser-perl:amd64. Preparing to unpack .../44-libhtml-parser-perl_3.82-1_amd64.deb ... Unpacking libhtml-parser-perl:amd64 (3.82-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../45-libhtml-tree-perl_5.07-3_all.deb ... Unpacking libhtml-tree-perl (5.07-3) ... Selecting previously unselected package libclone-perl:amd64. Preparing to unpack .../46-libclone-perl_0.46-1+b2_amd64.deb ... Unpacking libclone-perl:amd64 (0.46-1+b2) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../47-libio-html-perl_1.004-3_all.deb ... Unpacking libio-html-perl (1.004-3) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../48-liblwp-mediatypes-perl_6.04-2_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-2) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../49-libhttp-message-perl_6.45-1_all.deb ... Unpacking libhttp-message-perl (6.45-1) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../50-libhttp-cookies-perl_6.11-1_all.deb ... Unpacking libhttp-cookies-perl (6.11-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../51-libhttp-negotiate-perl_6.01-2_all.deb ... Unpacking libhttp-negotiate-perl (6.01-2) ... Selecting previously unselected package perl-openssl-defaults:amd64. Preparing to unpack .../52-perl-openssl-defaults_7+b2_amd64.deb ... Unpacking perl-openssl-defaults:amd64 (7+b2) ... Selecting previously unselected package libnet-ssleay-perl:amd64. Preparing to unpack .../53-libnet-ssleay-perl_1.94-1+b1_amd64.deb ... Unpacking libnet-ssleay-perl:amd64 (1.94-1+b1) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../54-libio-socket-ssl-perl_2.085-1_all.deb ... Unpacking libio-socket-ssl-perl (2.085-1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../55-libnet-http-perl_6.23-1_all.deb ... Unpacking libnet-http-perl (6.23-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../56-liblwp-protocol-https-perl_6.14-1_all.deb ... Unpacking liblwp-protocol-https-perl (6.14-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../57-libtry-tiny-perl_0.31-2_all.deb ... Unpacking libtry-tiny-perl (0.31-2) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../58-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../59-libwww-perl_6.77-1_all.deb ... Unpacking libwww-perl (6.77-1) ... Selecting previously unselected package libxml-parser-perl. Preparing to unpack .../60-libxml-parser-perl_2.47-1+b2_amd64.deb ... Unpacking libxml-parser-perl (2.47-1+b2) ... Selecting previously unselected package intltool. Preparing to unpack .../61-intltool_0.51.0-6_all.deb ... Unpacking intltool (0.51.0-6) ... Selecting previously unselected package python3-libxml2. Preparing to unpack .../62-python3-libxml2_2.12.7+dfsg-1_amd64.deb ... Unpacking python3-libxml2 (2.12.7+dfsg-1) ... Selecting previously unselected package itstool. Preparing to unpack .../63-itstool_2.0.6-3_all.deb ... Unpacking itstool (2.0.6-3) ... Selecting previously unselected package uuid-dev:amd64. Preparing to unpack .../64-uuid-dev_2.40.1-1_amd64.deb ... Unpacking uuid-dev:amd64 (2.40.1-1) ... Selecting previously unselected package libblkid-dev:amd64. Preparing to unpack .../65-libblkid-dev_2.40.1-1_amd64.deb ... Unpacking libblkid-dev:amd64 (2.40.1-1) ... Selecting previously unselected package libffi-dev:amd64. Preparing to unpack .../66-libffi-dev_3.4.6-1_amd64.deb ... Unpacking libffi-dev:amd64 (3.4.6-1) ... Selecting previously unselected package libglib2.0-0t64:amd64. Preparing to unpack .../67-libglib2.0-0t64_2.80.2-2_amd64.deb ... Unpacking libglib2.0-0t64:amd64 (2.80.2-2) ... Selecting previously unselected package libgirepository-2.0-0:amd64. Preparing to unpack .../68-libgirepository-2.0-0_2.80.2-2_amd64.deb ... Unpacking libgirepository-2.0-0:amd64 (2.80.2-2) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../69-libglib2.0-data_2.80.2-2_all.deb ... Unpacking libglib2.0-data (2.80.2-2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../70-libglib2.0-bin_2.80.2-2_amd64.deb ... Unpacking libglib2.0-bin (2.80.2-2) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../71-python3-packaging_24.0-1_all.deb ... Unpacking python3-packaging (24.0-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../72-libglib2.0-dev-bin_2.80.2-2_amd64.deb ... Unpacking libglib2.0-dev-bin (2.80.2-2) ... Selecting previously unselected package libsepol-dev:amd64. Preparing to unpack .../73-libsepol-dev_3.5-2+b1_amd64.deb ... Unpacking libsepol-dev:amd64 (3.5-2+b1) ... Selecting previously unselected package libpcre2-16-0:amd64. Preparing to unpack .../74-libpcre2-16-0_10.42-4+b1_amd64.deb ... Unpacking libpcre2-16-0:amd64 (10.42-4+b1) ... Selecting previously unselected package libpcre2-32-0:amd64. Preparing to unpack .../75-libpcre2-32-0_10.42-4+b1_amd64.deb ... Unpacking libpcre2-32-0:amd64 (10.42-4+b1) ... Selecting previously unselected package libpcre2-posix3:amd64. Preparing to unpack .../76-libpcre2-posix3_10.42-4+b1_amd64.deb ... Unpacking libpcre2-posix3:amd64 (10.42-4+b1) ... Selecting previously unselected package libpcre2-dev:amd64. Preparing to unpack .../77-libpcre2-dev_10.42-4+b1_amd64.deb ... Unpacking libpcre2-dev:amd64 (10.42-4+b1) ... Selecting previously unselected package libselinux1-dev:amd64. Preparing to unpack .../78-libselinux1-dev_3.5-2+b2_amd64.deb ... Unpacking libselinux1-dev:amd64 (3.5-2+b2) ... Selecting previously unselected package libmount-dev:amd64. Preparing to unpack .../79-libmount-dev_2.40.1-1_amd64.deb ... Unpacking libmount-dev:amd64 (2.40.1-1) ... Selecting previously unselected package libsysprof-capture-4-dev:amd64. Preparing to unpack .../80-libsysprof-capture-4-dev_46.0-1_amd64.deb ... Unpacking libsysprof-capture-4-dev:amd64 (46.0-1) ... Selecting previously unselected package libpkgconf3:amd64. Preparing to unpack .../81-libpkgconf3_1.8.1-1+b2_amd64.deb ... Unpacking libpkgconf3:amd64 (1.8.1-1+b2) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../82-pkgconf-bin_1.8.1-1+b2_amd64.deb ... Unpacking pkgconf-bin (1.8.1-1+b2) ... Selecting previously unselected package pkgconf:amd64. Preparing to unpack .../83-pkgconf_1.8.1-1+b2_amd64.deb ... Unpacking pkgconf:amd64 (1.8.1-1+b2) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../84-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1) ... Selecting previously unselected package libglib2.0-dev:amd64. Preparing to unpack .../85-libglib2.0-dev_2.80.2-2_amd64.deb ... Unpacking libglib2.0-dev:amd64 (2.80.2-2) ... Selecting previously unselected package libxml2-utils. Preparing to unpack .../86-libxml2-utils_2.12.7+dfsg-1_amd64.deb ... Unpacking libxml2-utils (2.12.7+dfsg-1) ... Selecting previously unselected package libxslt1.1:amd64. Preparing to unpack .../87-libxslt1.1_1.1.35-1+b1_amd64.deb ... Unpacking libxslt1.1:amd64 (1.1.35-1+b1) ... Selecting previously unselected package xml-core. Preparing to unpack .../88-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package mallard-rng. Preparing to unpack .../89-mallard-rng_1.1.0-1_all.deb ... Unpacking mallard-rng (1.1.0-1) ... Selecting previously unselected package python3-lxml:amd64. Preparing to unpack .../90-python3-lxml_5.2.1-1_amd64.deb ... Unpacking python3-lxml:amd64 (5.2.1-1) ... Selecting previously unselected package xsltproc. Preparing to unpack .../91-xsltproc_1.1.35-1+b1_amd64.deb ... Unpacking xsltproc (1.1.35-1+b1) ... Selecting previously unselected package yelp-xsl. Preparing to unpack .../92-yelp-xsl_42.1-2_all.deb ... Unpacking yelp-xsl (42.1-2) ... Selecting previously unselected package yelp-tools. Preparing to unpack .../93-yelp-tools_42.1-2_all.deb ... Unpacking yelp-tools (42.1-2) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libclone-perl:amd64 (0.46-1+b2) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libhtml-tagset-perl (3.24-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up liblwp-mediatypes-perl (6.04-2) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up libtry-tiny-perl (0.31-2) ... Setting up perl-openssl-defaults:amd64 (7+b2) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libencode-locale-perl (1.05-3) ... Setting up file (1:5.45-3) ... Setting up libffi-dev:amd64 (3.4.6-1) ... Setting up libpcre2-16-0:amd64 (10.42-4+b1) ... Setting up libelf1t64:amd64 (0.191-1+b1) ... Setting up tzdata (2024a-4) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Jun 28 02:48:59 UTC 2025. Universal Time is now: Sat Jun 28 02:48:59 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libsysprof-capture-4-dev:amd64 (46.0-1) ... Setting up autotools-dev (20220109.1) ... Setting up libpcre2-32-0:amd64 (10.42-4+b1) ... Setting up libglib2.0-0t64:amd64 (2.80.2-2) ... No schema files found: doing nothing. Setting up libglib2.0-data (2.80.2-2) ... Setting up libpkgconf3:amd64 (1.8.1-1+b2) ... Setting up uuid-dev:amd64 (2.40.1-1) ... Setting up libio-html-perl (1.004-3) ... Setting up autopoint (0.21-14) ... Setting up libsepol-dev:amd64 (3.5-2+b1) ... Setting up pkgconf-bin (1.8.1-1+b2) ... Setting up autoconf (2.71-3) ... Setting up libtimedate-perl (2.3300-2) ... Setting up zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1) ... Setting up libpcre2-posix3:amd64 (10.42-4+b1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up netbase (6.4) ... Setting up sgml-base (1.31) ... Setting up openssl (3.2.1-3) ... Setting up readline-common (8.2-4) ... Setting up libxml2:amd64 (2.12.7+dfsg-1) ... Setting up liburi-perl (5.28-1) ... Setting up yelp-xsl (42.1-2) ... Setting up libnet-ssleay-perl:amd64 (1.94-1+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up libblkid-dev:amd64 (2.40.1-1) ... Setting up libhttp-date-perl (6.06-1) ... Setting up gettext (0.21-14+b1) ... Setting up libfile-listing-perl (6.16-1) ... Setting up libpcre2-dev:amd64 (10.42-4+b1) ... Setting up libtool (2.4.7-7) ... Setting up libgirepository-2.0-0:amd64 (2.80.2-2) ... Setting up libselinux1-dev:amd64 (3.5-2+b2) ... Setting up libglib2.0-bin (2.80.2-2) ... Setting up libnet-http-perl (6.23-1) ... Setting up pkgconf:amd64 (1.8.1-1+b2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 146 added, 0 removed; done. Setting up libreadline8t64:amd64 (8.2-4) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up groff-base (1.23.0-4) ... Setting up xml-core (0.19) ... Setting up libhtml-parser-perl:amd64 (3.82-1) ... Setting up libxslt1.1:amd64 (1.1.35-1+b1) ... Setting up libxml2-utils (2.12.7+dfsg-1) ... Setting up libmount-dev:amd64 (2.40.1-1) ... Setting up libio-socket-ssl-perl (2.085-1) ... Setting up libhttp-message-perl (6.45-1) ... Setting up libhttp-negotiate-perl (6.01-2) ... Setting up libhttp-cookies-perl (6.11-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libhtml-tree-perl (5.07-3) ... Setting up libpython3.11-stdlib:amd64 (3.11.9-1) ... Setting up xsltproc (1.1.35-1+b1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libpython3-stdlib:amd64 (3.11.8-1) ... Setting up python3.11 (3.11.9-1) ... Setting up debhelper (13.15.3) ... Setting up python3 (3.11.8-1) ... Setting up python3-libxml2 (2.12.7+dfsg-1) ... Setting up python3-packaging (24.0-1) ... Setting up python3-lxml:amd64 (5.2.1-1) ... Setting up python3-lib2to3 (3.12.3-1) ... Setting up python3-pkg-resources (68.1.2-2) ... Setting up python3-distutils (3.12.3-1) ... Setting up libglib2.0-dev-bin (2.80.2-2) ... Setting up python3-setuptools (68.1.2-2) ... Setting up itstool (2.0.6-3) ... Setting up libglib2.0-dev:amd64 (2.80.2-2) ... Setting up dh-python (6.20240422) ... Setting up liblwp-protocol-https-perl (6.14-1) ... Setting up libwww-perl (6.77-1) ... Setting up libxml-parser-perl (2.47-1+b2) ... Setting up intltool (0.51.0-6) ... Processing triggers for libc-bin (2.38-11) ... Processing triggers for sgml-base (1.31) ... Setting up mallard-rng (1.1.0-1) ... Setting up yelp-tools (42.1-2) ... Processing triggers for ca-certificates (20240203) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/glogic-2.6/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../glogic_2.6-6_source.changes dpkg-buildpackage: info: source package glogic dpkg-buildpackage: info: source version 2.6-6 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Håvard Flaget Aasen dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 dpkg-source: info: using options from glogic-2.6/debian/source/options: --extend-diff-ignore=po/glogic.pot debian/rules clean dh clean --with python3 dh_clean debian/rules binary dh binary --with python3 dh_update_autotools_config dh_autoreconf configure.ac:9: warning: The macro `GLIB_GNU_GETTEXT' is obsolete. configure.ac:9: You should run autoupdate. aclocal.m4:388: GLIB_GNU_GETTEXT is expanded from... aclocal.m4:488: AM_GLIB_GNU_GETTEXT is expanded from... configure.ac:9: the top level configure.ac:9: warning: The macro `AC_TRY_LINK' is obsolete. configure.ac:9: You should run autoupdate. ./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from... lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from... lib/m4sugar/m4sh.m4:699: AS_IF is expanded from... ./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... ./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... aclocal.m4:73: GLIB_LC_MESSAGES is expanded from... aclocal.m4:388: GLIB_GNU_GETTEXT is expanded from... aclocal.m4:488: AM_GLIB_GNU_GETTEXT is expanded from... configure.ac:9: the top level configure.ac:9: warning: The macro `AC_TRY_LINK' is obsolete. configure.ac:9: You should run autoupdate. ./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from... lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from... lib/m4sugar/m4sh.m4:699: AS_IF is expanded from... ./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... ./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... lib/m4sugar/m4sh.m4:699: AS_IF is expanded from... ./lib/autoconf/headers.m4:89: _AC_CHECK_HEADER_COMPILE is expanded from... ./lib/autoconf/headers.m4:56: AC_CHECK_HEADER is expanded from... aclocal.m4:172: GLIB_WITH_NLS is expanded from... aclocal.m4:388: GLIB_GNU_GETTEXT is expanded from... aclocal.m4:488: AM_GLIB_GNU_GETTEXT is expanded from... configure.ac:9: the top level configure.ac:9: warning: The macro `AC_TRY_LINK' is obsolete. configure.ac:9: You should run autoupdate. ./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from... lib/m4sugar/m4sh.m4:699: AS_IF is expanded from... ./lib/autoconf/headers.m4:89: _AC_CHECK_HEADER_COMPILE is expanded from... ./lib/autoconf/headers.m4:56: AC_CHECK_HEADER is expanded from... aclocal.m4:172: GLIB_WITH_NLS is expanded from... aclocal.m4:388: GLIB_GNU_GETTEXT is expanded from... aclocal.m4:488: AM_GLIB_GNU_GETTEXT is expanded from... configure.ac:9: the top level configure.ac:9: warning: The macro `AC_OUTPUT_COMMANDS' is obsolete. configure.ac:9: You should run autoupdate. ./lib/autoconf/status.m4:1025: AC_OUTPUT_COMMANDS is expanded from... aclocal.m4:172: GLIB_WITH_NLS is expanded from... aclocal.m4:388: GLIB_GNU_GETTEXT is expanded from... aclocal.m4:488: AM_GLIB_GNU_GETTEXT is expanded from... configure.ac:9: the top level configure.ac:9: installing './compile' dh_auto_configure ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for a Python interpreter with version >= 3.1... python3 checking for python3... /usr/bin/python3 checking for python3 version... 3.11 checking for python3 platform... linux checking for GNU default python3 prefix... ${prefix} checking for GNU default python3 exec_prefix... ${exec_prefix} checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... /usr/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking whether NLS is requested... yes checking for intltool >= 0.35.0... 0.51.0 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... (cached) /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... (cached) /usr/bin/msgfmt checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.38.2 checking for XML::Parser... ok checking whether ln -s works... yes checking for itstool... itstool checking for xmllint... xmllint checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating bin/Makefile config.status: creating bin/glogic config.status: creating glogic/Makefile config.status: creating glogic/config.py config.status: creating glogic/Components/Makefile config.status: creating help/Makefile config.status: creating po/Makefile.in config.status: creating data/Makefile config.status: creating data/icons/Makefile config.status: creating data/icons/scalable/Makefile config.status: creating data/images/Makefile config.status: creating data/images/components/Makefile config.status: creating examples/Makefile config.status: executing depfiles commands config.status: executing default-1 commands config.status: executing po/stamp-it commands dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/glogic-2.6' Making all in bin make[2]: Entering directory '/build/reproducible-path/glogic-2.6/bin' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/bin' Making all in glogic make[2]: Entering directory '/build/reproducible-path/glogic-2.6/glogic' Making all in Components make[3]: Entering directory '/build/reproducible-path/glogic-2.6/glogic/Components' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic/Components' make[3]: Entering directory '/build/reproducible-path/glogic-2.6/glogic' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic' Making all in po make[2]: Entering directory '/build/reproducible-path/glogic-2.6/po' file=`echo ja | sed 's,.*/,,'`.gmo \ && rm -f $file && /usr/bin/msgfmt -o $file ja.po make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/po' Making all in data make[2]: Entering directory '/build/reproducible-path/glogic-2.6/data' Making all in icons make[3]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons' Making all in scalable make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons/scalable' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons/scalable' make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons' Making all in images make[3]: Entering directory '/build/reproducible-path/glogic-2.6/data/images' Making all in components make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/images/components' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images/components' make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/images' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images' make[3]: Entering directory '/build/reproducible-path/glogic-2.6/data' LC_ALL=C /usr/bin/intltool-merge -d -u -c ../po/.intltool-merge-cache ../po glogic.desktop.in glogic.desktop Generating and caching the translation database Merging translations into glogic.desktop. make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/data' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/data' Making all in examples make[2]: Entering directory '/build/reproducible-path/glogic-2.6/examples' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/examples' Making all in help make[2]: Entering directory '/build/reproducible-path/glogic-2.6/help' if ! test -d "ja/"; then mkdir "ja/"; fi msgfmt -o "ja/ja.mo" "ja/ja.po" if ! test -d "ja/"; then mkdir "ja/"; fi if test -d "C"; then d="../"; else d="/build/reproducible-path/glogic-2.6/help/"; fi; \ mo="ja/ja.mo"; \ if test -f "${mo}"; then mo="../${mo}"; else mo="/build/reproducible-path/glogic-2.6/help/${mo}"; fi; \ (cd "ja/" && itstool -m "${mo}" ${d}/C/add-component.page ${d}/C/add-net.page ${d}/C/basic-components.page ${d}/C/credit.xml ${d}/C/flipflop-components.page ${d}/C/index.page ${d}/C/legal.xml ${d}/C/mil-iec.page ${d}/C/edit.page ${d}/C/other-components.page ${d}/C/saveimage.page ${d}/C/shiftregister-components.page ${d}/C/simulate.page ${d}/C/timing.page ${d}/C/viewer-components.page) && \ touch "ja/ja.stamp" make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/help' make[2]: Entering directory '/build/reproducible-path/glogic-2.6' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/reproducible-path/glogic-2.6' make[1]: Leaving directory '/build/reproducible-path/glogic-2.6' dh_auto_test make -j12 check "TESTSUITEFLAGS=-j12 --verbose" VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/glogic-2.6' Making check in bin make[2]: Entering directory '/build/reproducible-path/glogic-2.6/bin' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/bin' Making check in glogic make[2]: Entering directory '/build/reproducible-path/glogic-2.6/glogic' Making check in Components make[3]: Entering directory '/build/reproducible-path/glogic-2.6/glogic/Components' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic/Components' make[3]: Entering directory '/build/reproducible-path/glogic-2.6/glogic' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic' Making check in po make[2]: Entering directory '/build/reproducible-path/glogic-2.6/po' INTLTOOL_EXTRACT="/usr/bin/intltool-extract" XGETTEXT="/usr/bin/xgettext" srcdir=. /usr/bin/intltool-update --gettext-package glogic --pot rm -f missing notexist srcdir=. /usr/bin/intltool-update -m if [ -r missing -o -r notexist ]; then \ exit 1; \ fi make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/po' Making check in data make[2]: Entering directory '/build/reproducible-path/glogic-2.6/data' Making check in icons make[3]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons' Making check in scalable make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons/scalable' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons/scalable' make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons' make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons' Making check in images make[3]: Entering directory '/build/reproducible-path/glogic-2.6/data/images' Making check in components make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/images/components' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images/components' make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/images' make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images' make[3]: Entering directory '/build/reproducible-path/glogic-2.6/data' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/data' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/data' Making check in examples make[2]: Entering directory '/build/reproducible-path/glogic-2.6/examples' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/examples' Making check in help make[2]: Entering directory '/build/reproducible-path/glogic-2.6/help' for lc in C ja; do \ if test -d "$lc"; \ then d=; \ xmlpath="$lc"; \ else \ d="./"; \ xmlpath="$lc:./$lc"; \ fi; \ for page in add-component.page add-net.page basic-components.page credit.xml flipflop-components.page index.page legal.xml mil-iec.page edit.page other-components.page saveimage.page shiftregister-components.page simulate.page timing.page viewer-components.page; do \ echo "xmllint --nonet --noout --noent --path $xmlpath --xinclude $d$lc/$page"; \ xmllint --nonet --noout --noent --path "$xmlpath" --xinclude "$d$lc/$page"; \ done; \ done xmllint --nonet --noout --noent --path C --xinclude C/add-component.page xmllint --nonet --noout --noent --path C --xinclude C/add-net.page xmllint --nonet --noout --noent --path C --xinclude C/basic-components.page xmllint --nonet --noout --noent --path C --xinclude C/credit.xml xmllint --nonet --noout --noent --path C --xinclude C/flipflop-components.page xmllint --nonet --noout --noent --path C --xinclude C/index.page xmllint --nonet --noout --noent --path C --xinclude C/legal.xml xmllint --nonet --noout --noent --path C --xinclude C/mil-iec.page xmllint --nonet --noout --noent --path C --xinclude C/edit.page xmllint --nonet --noout --noent --path C --xinclude C/other-components.page xmllint --nonet --noout --noent --path C --xinclude C/saveimage.page xmllint --nonet --noout --noent --path C --xinclude C/shiftregister-components.page xmllint --nonet --noout --noent --path C --xinclude C/simulate.page xmllint --nonet --noout --noent --path C --xinclude C/timing.page xmllint --nonet --noout --noent --path C --xinclude C/viewer-components.page xmllint --nonet --noout --noent --path ja --xinclude ja/add-component.page xmllint --nonet --noout --noent --path ja --xinclude ja/add-net.page xmllint --nonet --noout --noent --path ja --xinclude ja/basic-components.page xmllint --nonet --noout --noent --path ja --xinclude ja/credit.xml xmllint --nonet --noout --noent --path ja --xinclude ja/flipflop-components.page xmllint --nonet --noout --noent --path ja --xinclude ja/index.page xmllint --nonet --noout --noent --path ja --xinclude ja/legal.xml xmllint --nonet --noout --noent --path ja --xinclude ja/mil-iec.page xmllint --nonet --noout --noent --path ja --xinclude ja/edit.page xmllint --nonet --noout --noent --path ja --xinclude ja/other-components.page xmllint --nonet --noout --noent --path ja --xinclude ja/saveimage.page xmllint --nonet --noout --noent --path ja --xinclude ja/shiftregister-components.page xmllint --nonet --noout --noent --path ja --xinclude ja/simulate.page xmllint --nonet --noout --noent --path ja --xinclude ja/timing.page xmllint --nonet --noout --noent --path ja --xinclude ja/viewer-components.page make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/help' make[2]: Entering directory '/build/reproducible-path/glogic-2.6' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/build/reproducible-path/glogic-2.6' make[1]: Leaving directory '/build/reproducible-path/glogic-2.6' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/glogic/ make -j12 install DESTDIR=/build/reproducible-path/glogic-2.6/debian/glogic AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/reproducible-path/glogic-2.6' Making install in bin make[2]: Entering directory '/build/reproducible-path/glogic-2.6/bin' make[3]: Entering directory '/build/reproducible-path/glogic-2.6/bin' make[3]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/reproducible-path/glogic-2.6/debian/glogic/usr/bin' /usr/bin/install -c glogic '/build/reproducible-path/glogic-2.6/debian/glogic/usr/bin' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/bin' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/bin' Making install in glogic make[2]: Entering directory '/build/reproducible-path/glogic-2.6/glogic' Making install in Components make[3]: Entering directory '/build/reproducible-path/glogic-2.6/glogic/Components' make[4]: Entering directory '/build/reproducible-path/glogic-2.6/glogic/Components' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/glogic-2.6/debian/glogic/usr/lib/python3.11/site-packages/glogic/Components' /usr/bin/install -c -m 644 __init__.py Calculator.py Counter.py FlipFlop.py Misc.py Standard.py StateViewer.py SystemComponents.py '/build/reproducible-path/glogic-2.6/debian/glogic/usr/lib/python3.11/site-packages/glogic/Components' Byte-compiling python modules... __init__.pyCalculator.pyCounter.pyFlipFlop.pyMisc.pyStandard.pyStateViewer.pySystemComponents.py Byte-compiling python modules (optimized versions) ... __init__.pyCalculator.pyCounter.pyFlipFlop.pyMisc.pyStandard.pyStateViewer.pySystemComponents.py make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic/Components' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic/Components' make[3]: Entering directory '/build/reproducible-path/glogic-2.6/glogic' make[4]: Entering directory '/build/reproducible-path/glogic-2.6/glogic' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/glogic-2.6/debian/glogic/usr/lib/python3.11/site-packages/glogic' /usr/bin/install -c -m 644 __init__.py CircuitManager.py ComponentConverter.py ComponentWindow.py DiagramArea.py DrawArea.py Exporter.py MainFrame.py Preference.py PreferencesWindow.py PropertyWindow.py TimingDiagramWindow.py Utils.py config.py const.py '/build/reproducible-path/glogic-2.6/debian/glogic/usr/lib/python3.11/site-packages/glogic' Byte-compiling python modules... __init__.pyCircuitManager.pyComponentConverter.pyComponentWindow.pyDiagramArea.pyDrawArea.pyExporter.pyMainFrame.pyPreference.pyPreferencesWindow.pyPropertyWindow.pyTimingDiagramWindow.pyUtils.pyconfig.pyconst.py Byte-compiling python modules (optimized versions) ... __init__.pyCircuitManager.pyComponentConverter.pyComponentWindow.pyDiagramArea.pyDrawArea.pyExporter.pyMainFrame.pyPreference.pyPreferencesWindow.pyPropertyWindow.pyTimingDiagramWindow.pyUtils.pyconfig.pyconst.py make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/glogic' Making install in po make[2]: Entering directory '/build/reproducible-path/glogic-2.6/po' linguas="ja "; \ for lang in $linguas; do \ dir=/build/reproducible-path/glogic-2.6/debian/glogic/usr/share/locale/$lang/LC_MESSAGES; \ /bin/bash /build/reproducible-path/glogic-2.6/install-sh -d $dir; \ if test -r $lang.gmo; then \ /usr/bin/install -c -m 644 $lang.gmo $dir/glogic.mo; \ echo "installing $lang.gmo as $dir/glogic.mo"; \ else \ /usr/bin/install -c -m 644 ./$lang.gmo $dir/glogic.mo; \ echo "installing ./$lang.gmo as" \ "$dir/glogic.mo"; \ fi; \ if test -r $lang.gmo.m; then \ /usr/bin/install -c -m 644 $lang.gmo.m $dir/glogic.mo.m; \ echo "installing $lang.gmo.m as $dir/glogic.mo.m"; \ else \ if test -r ./$lang.gmo.m ; then \ /usr/bin/install -c -m 644 ./$lang.gmo.m \ $dir/glogic.mo.m; \ echo "installing ./$lang.gmo.m as" \ "$dir/glogic.mo.m"; \ else \ true; \ fi; \ fi; \ done installing ja.gmo as /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/locale/ja/LC_MESSAGES/glogic.mo make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/po' Making install in data make[2]: Entering directory '/build/reproducible-path/glogic-2.6/data' Making install in icons make[3]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons' Making install in scalable make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons/scalable' make[5]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons/scalable' make[5]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/glogic-2.6/debian/glogic/usr/share/icons/hicolor/scalable/apps' /usr/bin/install -c -m 644 glogic.svg '/build/reproducible-path/glogic-2.6/debian/glogic/usr/share/icons/hicolor/scalable/apps' make[5]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons/scalable' make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons/scalable' make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons' make[5]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons' make[5]: Nothing to be done for 'install-exec-am'. make install-data-hook make[6]: Entering directory '/build/reproducible-path/glogic-2.6/data/icons' *** Icon cache not updated. After (un)install, run this: *** gtk-update-icon-cache -f -t /usr/share/icons/hicolor make[6]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons' make[5]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons' make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/data/icons' Making install in images make[3]: Entering directory '/build/reproducible-path/glogic-2.6/data/images' Making install in components make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/images/components' make[5]: Entering directory '/build/reproducible-path/glogic-2.6/data/images/components' make[5]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/glogic-2.6/debian/glogic/usr/share/glogic/images/components' /usr/bin/install -c -m 644 7seg.png adder.png and.png counter.png dff.png gnd.png jkff.png led.png nand.png nor.png not.png or.png osc.png probe.png rsff.png siso.png sipo.png piso.png pipo.png sw.png text.png tff.png vdd.png xor.png '/build/reproducible-path/glogic-2.6/debian/glogic/usr/share/glogic/images/components' make[5]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images/components' make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images/components' make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data/images' make[5]: Entering directory '/build/reproducible-path/glogic-2.6/data/images' make[5]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/glogic-2.6/debian/glogic/usr/share/glogic/images' /usr/bin/install -c -m 644 add-component.png add-net.png glogic-small.ico glogic.png '/build/reproducible-path/glogic-2.6/debian/glogic/usr/share/glogic/images' make[5]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images' make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/data/images' make[3]: Entering directory '/build/reproducible-path/glogic-2.6/data' make[4]: Entering directory '/build/reproducible-path/glogic-2.6/data' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/reproducible-path/glogic-2.6/debian/glogic/usr/share/applications' /usr/bin/install -c -m 644 glogic.desktop '/build/reproducible-path/glogic-2.6/debian/glogic/usr/share/applications' make[4]: Leaving directory '/build/reproducible-path/glogic-2.6/data' make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/data' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/data' Making install in examples make[2]: Entering directory '/build/reproducible-path/glogic-2.6/examples' make[3]: Entering directory '/build/reproducible-path/glogic-2.6/examples' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/examples' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/examples' Making install in help make[2]: Entering directory '/build/reproducible-path/glogic-2.6/help' make[3]: Entering directory '/build/reproducible-path/glogic-2.6/help' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/install -c -m 644 C/add-component.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/add-component.page /usr/bin/install -c -m 644 C/add-net.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/add-net.page /usr/bin/install -c -m 644 C/basic-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/basic-components.page /usr/bin/install -c -m 644 C/credit.xml /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/credit.xml /usr/bin/install -c -m 644 C/flipflop-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/flipflop-components.page /usr/bin/install -c -m 644 C/index.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/index.page /usr/bin/install -c -m 644 C/legal.xml /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/legal.xml /usr/bin/install -c -m 644 C/mil-iec.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/mil-iec.page /usr/bin/install -c -m 644 C/edit.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/edit.page /usr/bin/install -c -m 644 C/other-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/other-components.page /usr/bin/install -c -m 644 C/saveimage.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/saveimage.page /usr/bin/install -c -m 644 C/shiftregister-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/shiftregister-components.page /usr/bin/install -c -m 644 C/simulate.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/simulate.page /usr/bin/install -c -m 644 C/timing.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/timing.page /usr/bin/install -c -m 644 C/viewer-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/viewer-components.page /usr/bin/install -c -m 644 ja/add-component.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/add-component.page /usr/bin/install -c -m 644 ja/add-net.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/add-net.page /usr/bin/install -c -m 644 ja/basic-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/basic-components.page /usr/bin/install -c -m 644 ja/credit.xml /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/credit.xml /usr/bin/install -c -m 644 ja/flipflop-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/flipflop-components.page /usr/bin/install -c -m 644 ja/index.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/index.page /usr/bin/install -c -m 644 ja/legal.xml /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/legal.xml /usr/bin/install -c -m 644 ja/mil-iec.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/mil-iec.page /usr/bin/install -c -m 644 ja/edit.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/edit.page /usr/bin/install -c -m 644 ja/other-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/other-components.page /usr/bin/install -c -m 644 ja/saveimage.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/saveimage.page /usr/bin/install -c -m 644 ja/shiftregister-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/shiftregister-components.page /usr/bin/install -c -m 644 ja/simulate.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/simulate.page /usr/bin/install -c -m 644 ja/timing.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/timing.page /usr/bin/install -c -m 644 ja/viewer-components.page /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/viewer-components.page /usr/bin/install -c -m 644 ./C/figures/add-component.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/add-component.png ln -s -f /usr/share/help/C/glogic/figures/add-component.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/add-component.png /usr/bin/install -c -m 644 ./C/figures/add-net.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/add-net.png ln -s -f /usr/share/help/C/glogic/figures/add-net.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/add-net.png /usr/bin/install -c -m 644 ./C/figures/glogic-logo.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/glogic-logo.png ln -s -f /usr/share/help/C/glogic/figures/glogic-logo.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/glogic-logo.png /usr/bin/install -c -m 644 ./C/figures/glogic-trail.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/glogic-trail.png ln -s -f /usr/share/help/C/glogic/figures/glogic-trail.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/glogic-trail.png /usr/bin/install -c -m 644 ./C/figures/probe-btn.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/probe-btn.png ln -s -f /usr/share/help/C/glogic/figures/probe-btn.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/probe-btn.png /usr/bin/install -c -m 644 ./C/figures/rsff-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/rsff-equiv.png ln -s -f /usr/share/help/C/glogic/figures/rsff-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/rsff-equiv.png /usr/bin/install -c -m 644 ./C/figures/jkff-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/jkff-equiv.png ln -s -f /usr/share/help/C/glogic/figures/jkff-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/jkff-equiv.png /usr/bin/install -c -m 644 ./C/figures/dff-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/dff-equiv.png ln -s -f /usr/share/help/C/glogic/figures/dff-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/dff-equiv.png /usr/bin/install -c -m 644 ./C/figures/tff-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/tff-equiv.png ln -s -f /usr/share/help/C/glogic/figures/tff-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/tff-equiv.png /usr/bin/install -c -m 644 ./C/figures/sipo-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/sipo-equiv.png ln -s -f /usr/share/help/C/glogic/figures/sipo-equiv.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/sipo-equiv.png /usr/bin/install -c -m 644 ./C/figures/components/7seg.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/7seg.png ln -s -f /usr/share/help/C/glogic/figures/components/7seg.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/7seg.png /usr/bin/install -c -m 644 ./C/figures/components/adder.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/adder.png ln -s -f /usr/share/help/C/glogic/figures/components/adder.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/adder.png /usr/bin/install -c -m 644 ./C/figures/components/and.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/and.png ln -s -f /usr/share/help/C/glogic/figures/components/and.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/and.png /usr/bin/install -c -m 644 ./C/figures/components/counter.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/counter.png ln -s -f /usr/share/help/C/glogic/figures/components/counter.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/counter.png /usr/bin/install -c -m 644 ./C/figures/components/dff.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/dff.png ln -s -f /usr/share/help/C/glogic/figures/components/dff.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/dff.png /usr/bin/install -c -m 644 ./C/figures/components/gnd.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/gnd.png ln -s -f /usr/share/help/C/glogic/figures/components/gnd.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/gnd.png /usr/bin/install -c -m 644 ./C/figures/components/jkff.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/jkff.png ln -s -f /usr/share/help/C/glogic/figures/components/jkff.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/jkff.png /usr/bin/install -c -m 644 ./C/figures/components/led.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/led.png ln -s -f /usr/share/help/C/glogic/figures/components/led.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/led.png /usr/bin/install -c -m 644 ./C/figures/components/nand.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/nand.png ln -s -f /usr/share/help/C/glogic/figures/components/nand.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/nand.png /usr/bin/install -c -m 644 ./C/figures/components/nor.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/nor.png ln -s -f /usr/share/help/C/glogic/figures/components/nor.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/nor.png /usr/bin/install -c -m 644 ./C/figures/components/not.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/not.png ln -s -f /usr/share/help/C/glogic/figures/components/not.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/not.png /usr/bin/install -c -m 644 ./C/figures/components/or.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/or.png ln -s -f /usr/share/help/C/glogic/figures/components/or.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/or.png /usr/bin/install -c -m 644 ./C/figures/components/osc.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/osc.png ln -s -f /usr/share/help/C/glogic/figures/components/osc.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/osc.png /usr/bin/install -c -m 644 ./C/figures/components/pipo.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/pipo.png ln -s -f /usr/share/help/C/glogic/figures/components/pipo.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/pipo.png /usr/bin/install -c -m 644 ./C/figures/components/piso.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/piso.png ln -s -f /usr/share/help/C/glogic/figures/components/piso.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/piso.png /usr/bin/install -c -m 644 ./C/figures/components/probe.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/probe.png ln -s -f /usr/share/help/C/glogic/figures/components/probe.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/probe.png /usr/bin/install -c -m 644 ./C/figures/components/rsff.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/rsff.png ln -s -f /usr/share/help/C/glogic/figures/components/rsff.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/rsff.png /usr/bin/install -c -m 644 ./C/figures/components/sipo.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/sipo.png ln -s -f /usr/share/help/C/glogic/figures/components/sipo.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/sipo.png /usr/bin/install -c -m 644 ./C/figures/components/siso.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/siso.png ln -s -f /usr/share/help/C/glogic/figures/components/siso.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/siso.png /usr/bin/install -c -m 644 ./C/figures/components/sw.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/sw.png ln -s -f /usr/share/help/C/glogic/figures/components/sw.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/sw.png /usr/bin/install -c -m 644 ./C/figures/components/text.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/text.png ln -s -f /usr/share/help/C/glogic/figures/components/text.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/text.png /usr/bin/install -c -m 644 ./C/figures/components/tff.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/tff.png ln -s -f /usr/share/help/C/glogic/figures/components/tff.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/tff.png /usr/bin/install -c -m 644 ./C/figures/components/vdd.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/vdd.png ln -s -f /usr/share/help/C/glogic/figures/components/vdd.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/vdd.png /usr/bin/install -c -m 644 ./C/figures/components/xor.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/C/glogic/figures/components/xor.png ln -s -f /usr/share/help/C/glogic/figures/components/xor.png /build/reproducible-path/glogic-2.6/debian/glogic/usr/share/help/ja/glogic/figures/components/xor.png make[3]: Leaving directory '/build/reproducible-path/glogic-2.6/help' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6/help' make[2]: Entering directory '/build/reproducible-path/glogic-2.6' make[3]: Entering directory '/build/reproducible-path/glogic-2.6' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/reproducible-path/glogic-2.6' make[2]: Leaving directory '/build/reproducible-path/glogic-2.6' make[1]: Leaving directory '/build/reproducible-path/glogic-2.6' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_python3 dh_icons dh_perl dh_link dh_strip_nondeterminism Normalized debian/glogic/usr/share/locale/ja/LC_MESSAGES/glogic.mo debian/rules override_dh_compress make[1]: Entering directory '/build/reproducible-path/glogic-2.6' dh_compress -X.glc make[1]: Leaving directory '/build/reproducible-path/glogic-2.6' dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'glogic' in '../glogic_2.6-6_all.deb'. dpkg-genbuildinfo --build=binary -O../glogic_2.6-6_amd64.buildinfo dpkg-genchanges --build=binary -O../glogic_2.6-6_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-source: info: using options from glogic-2.6/debian/source/options: --extend-diff-ignore=po/glogic.pot dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1495565 and its subdirectories I: Current time: Fri Jun 27 14:49:23 -12 2025 I: pbuilder-time-stamp: 1751078963 Sat May 25 20:26:25 UTC 2024 I: 1st build successful. Starting 2nd build on remote node infom01-amd64.debian.net. Sat May 25 20:26:25 UTC 2024 I: Preparing to do remote build '2' on infom01-amd64.debian.net. Sat May 25 20:27:36 UTC 2024 I: Deleting $TMPDIR on infom01-amd64.debian.net. Sat May 25 20:27:37 UTC 2024 I: glogic_2.6-6_amd64.changes: Format: 1.8 Date: Tue, 16 Nov 2021 14:58:06 +0100 Source: glogic Binary: glogic Architecture: all Version: 2.6-6 Distribution: unstable Urgency: medium Maintainer: Debian QA Group Changed-By: Håvard Flaget Aasen Description: glogic - graphical logic circuit simulator Closes: 998487 Changes: glogic (2.6-6) unstable; urgency=medium . * QA upload. * Add gbp.conf * Patch: Remove duplicated line in configure.ac Closes: #998487 * Drop autopkgtest. * Update standards version to 4.6.0 Checksums-Sha1: f2241e3e36bab28fa57415828aeab0053b8f1dad 106632 glogic_2.6-6_all.deb 140c2dbb9ddd3385488d6505f4631f12e3ddbb00 7123 glogic_2.6-6_amd64.buildinfo Checksums-Sha256: a81dfb262f183873360fd0b0f9d6848981396d35da612c219ad3eb98874c44be 106632 glogic_2.6-6_all.deb 25fbb70e925c388618144705e22928a20d81a224ffadb915f02d6f7792d0baba 7123 glogic_2.6-6_amd64.buildinfo Files: 76f4319120b81ebb0ebf97593aac2b19 106632 electronics optional glogic_2.6-6_all.deb 1de1753b080659b2842609ed10834e2a 7123 electronics optional glogic_2.6-6_amd64.buildinfo Sat May 25 20:27:38 UTC 2024 I: diffoscope 266 will be used to compare the two builds: Running as unit: rb-diffoscope-amd64_36-13876.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.RbUJqpll/glogic_2.6-6.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.RbUJqpll/glogic_2.6-6.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.RbUJqpll/glogic_2.6-6.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.RbUJqpll/b1/glogic_2.6-6_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.RbUJqpll/b2/glogic_2.6-6_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.363s) 0.363s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 701ms CPU time consumed: 702ms Sat May 25 20:27:39 UTC 2024 I: diffoscope 266 found no differences in the changes files, and a .buildinfo file also exists. Sat May 25 20:27:39 UTC 2024 I: glogic from unstable built successfully and reproducibly on amd64. Sat May 25 20:27:41 UTC 2024 I: Submitting .buildinfo files to external archives: Sat May 25 20:27:41 UTC 2024 I: Submitting 8.0K b1/glogic_2.6-6_amd64.buildinfo.asc Sat May 25 20:27:41 UTC 2024 I: Submitting 8.0K b2/glogic_2.6-6_amd64.buildinfo.asc Sat May 25 20:27:42 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat May 25 20:27:42 UTC 2024 I: Done submitting .buildinfo files. Sat May 25 20:27:42 UTC 2024 I: Removing signed glogic_2.6-6_amd64.buildinfo.asc files: removed './b1/glogic_2.6-6_amd64.buildinfo.asc' removed './b2/glogic_2.6-6_amd64.buildinfo.asc'