Thu Jul 22 08:01:24 UTC 2021 I: starting to build openexr-viewers/bullseye/armhf on jenkins on '2021-07-22 08:01' Thu Jul 22 08:01:24 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_41/1301/console.log Thu Jul 22 08:01:24 UTC 2021 I: Downloading source for bullseye/openexr-viewers=2.3.0-1 --2021-07-22 08:01:24-- http://cdn-fastly.deb.debian.org/debian/pool/main/o/openexr-viewers/openexr-viewers_2.3.0-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1848 (1.8K) Saving to: ‘openexr-viewers_2.3.0-1.dsc’ 0K . 100% 44.4M=0s 2021-07-22 08:01:24 (44.4 MB/s) - ‘openexr-viewers_2.3.0-1.dsc’ saved [1848/1848] Thu Jul 22 08:01:25 UTC 2021 I: openexr-viewers_2.3.0-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: openexr-viewers Binary: openexr-viewers Architecture: any Version: 2.3.0-1 Maintainer: Pino Toscano Homepage: https://www.openexr.com Standards-Version: 4.5.0 Build-Depends: debhelper-compat (= 12), pkg-config, libopenexr-dev (>= 1.6), libfltk1.3-dev, libgl1-mesa-dev, zlib1g-dev Package-List: openexr-viewers deb graphics optional arch=any Checksums-Sha1: 074f14cca382fea6ce5846b31b0c32063f89ac2f 532154 openexr-viewers_2.3.0.orig.tar.gz 098718416aa8f8b52b1c90b190775878cb3c05ed 4704 openexr-viewers_2.3.0-1.debian.tar.xz Checksums-Sha256: 9b8a6abebfda17586ef7e5fea9ba8e87a3cc688676681ef306b445c3f4034175 532154 openexr-viewers_2.3.0.orig.tar.gz 26dc141a5e03c7404c3a527f31b8ac80fcab25e61efb27448f4494de368f3ead 4704 openexr-viewers_2.3.0-1.debian.tar.xz Files: 15561e0e79da1218b7cc124bdd13ef3e 532154 openexr-viewers_2.3.0.orig.tar.gz d1dbae8c4787e5fbce2cc9360cc275ef 4704 openexr-viewers_2.3.0-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEXyqfuC+mweEHcAcHLRkciEOxP00FAl6JoY4ACgkQLRkciEOx P03gBBAAhsKSaVXHwjk7lgykciguvOnYh7Kc9fuizXqrMpEDTrZcWnOS/EcEVu59 cz+6r/90xURhGisbGOkydcsud4zuo0vbR7yfVPWGGXhWUi6HgTKT86ZCHVJJJT61 c8ohZ45pBa98bJ16Nqh4dFlvaGR8riAfJEjPZZ/WMzedX9DC/31OtbpL9uqeuw31 Qsp71NRJxRFqDvrDja/PmbpfdUKElomUzmkUZw3EPnl6oLCHGW19sHuZsRrue5aj Qf9mwLGh2CYvpNw5Je2B/By8LAdlPFRI8mg1o/Lpi2bXKU2qLXtIqnxv/rvVYaBf 33OWgN94cmuNjRdVHGQTtuBgmc56i3VrIdf0Gybnx6fX7Z8v8YnOWV4+7GFfpc6V vGMhFP65ZR/ozFp0mLcUtiSNc7ymK6fC6t9sgza1gvYZqdO74mm7NyRH3avbKuaz 2HWNvohY2nciB5Q7PR5pAFfidgn8md/72NeVqUk66g3HlXahm4Gt+plDMUiprEZ5 JUdEbLFYr1K1eikh+su+72PJceBagV/e64lREYbyJH+78CsrJ1ESpx+e1Yghe5a0 w0NvO0CiF4WrG19l5BHkhRNRr06axkM0AlKi+L8yG737JuimqQDJ9u4gSC6/5YFs LAcJ6IfNI5mWP7p7478n8cikcYWgkgqvo+7dgW9lX4FgYCYn+ss= =pGoE -----END PGP SIGNATURE----- Thu Jul 22 08:01:25 UTC 2021 I: Checking whether the package is not for us Thu Jul 22 08:01:25 UTC 2021 I: Starting 1st build on remote node virt64a-armhf-rb.debian.net. Thu Jul 22 08:01:25 UTC 2021 I: Preparing to do remote build '1' on virt64a-armhf-rb.debian.net. Thu Jul 22 08:04:42 UTC 2021 I: Deleting $TMPDIR on virt64a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Jul 21 20:01:31 -12 2021 I: pbuilder-time-stamp: 1626940891 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [openexr-viewers_2.3.0-1.dsc] I: copying [./openexr-viewers_2.3.0.orig.tar.gz] I: copying [./openexr-viewers_2.3.0-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.a2QENY0_/trustedkeys.kbx': General error gpgv: Signature made Sat Apr 4 21:14:54 2020 -12 gpgv: using RSA key 5F2A9FB82FA6C1E1077007072D191C8843B13F4D gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./openexr-viewers_2.3.0-1.dsc dpkg-source: info: extracting openexr-viewers in openexr-viewers-2.3.0 dpkg-source: info: unpacking openexr-viewers_2.3.0.orig.tar.gz dpkg-source: info: unpacking openexr-viewers_2.3.0-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying link_gl.diff I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/27733/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='05f80b6189cd4862b8bd8d8e608c1b22' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='27733' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.VJAiUkONzS/pbuilderrc_JUZB --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.VJAiUkONzS/b1 --logfile b1/build.log openexr-viewers_2.3.0-1.dsc' SUDO_GID='114' SUDO_UID='108' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux virt64a 5.10.0-7-arm64 #1 SMP Debian 5.10.40-1 (2021-05-28) aarch64 GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Jun 21 14:26 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Feb 7 02:38 more -rwsr-xr-x 1 root root 34400 Feb 7 02:38 mount -rwxr-xr-x 1 root root 9824 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 14:26 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 20 21:25 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Feb 7 02:38 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 21:55 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Feb 7 02:38 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/27733/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), pkg-config, libopenexr-dev (>= 1.6), libfltk1.3-dev, libgl1-mesa-dev, zlib1g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on libopenexr-dev (>= 1.6); however: Package libopenexr-dev is not installed. pbuilder-satisfydepends-dummy depends on libfltk1.3-dev; however: Package libfltk1.3-dev is not installed. pbuilder-satisfydepends-dummy depends on libgl1-mesa-dev; however: Package libgl1-mesa-dev is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} fontconfig-config{a} fonts-dejavu-core{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libbsd0{a} libcairo2{a} libdebhelper-perl{a} libdrm-amdgpu1{a} libdrm-common{a} libdrm-nouveau2{a} libdrm-radeon1{a} libdrm2{a} libedit2{a} libegl-dev{a} libegl-mesa0{a} libegl1{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libfltk-cairo1.3{a} libfltk-forms1.3{a} libfltk-gl1.3{a} libfltk-images1.3{a} libfltk1.3{a} libfltk1.3-dev{a} libfontconfig1{a} libfreetype6{a} libgbm1{a} libgl-dev{a} libgl1{a} libgl1-mesa-dev{a} libgl1-mesa-dri{a} libglapi-mesa{a} libgles-dev{a} libgles1{a} libgles2{a} libglib2.0-0{a} libglvnd-dev{a} libglvnd0{a} libglx-dev{a} libglx-mesa0{a} libglx0{a} libicu67{a} libilmbase-dev{a} libilmbase25{a} libjpeg62-turbo{a} libllvm11{a} libmagic-mgc{a} libmagic1{a} libmd0{a} libopenexr-dev{a} libopenexr25{a} libopengl-dev{a} libopengl0{a} libpipeline1{a} libpixman-1-0{a} libpng16-16{a} libpthread-stubs0-dev{a} libsensors-config{a} libsensors5{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libvulkan1{a} libwayland-client0{a} libwayland-server0{a} libx11-6{a} libx11-data{a} libx11-dev{a} libx11-xcb1{a} libxau-dev{a} libxau6{a} libxcb-dri2-0{a} libxcb-dri3-0{a} libxcb-glx0{a} libxcb-present0{a} libxcb-render0{a} libxcb-shm0{a} libxcb-sync1{a} libxcb-xfixes0{a} libxcb1{a} libxcb1-dev{a} libxcursor1{a} libxdamage1{a} libxdmcp-dev{a} libxdmcp6{a} libxext6{a} libxfixes3{a} libxft2{a} libxinerama1{a} libxml2{a} libxrender1{a} libxshmfence1{a} libxxf86vm1{a} libz3-4{a} m4{a} man-db{a} pkg-config{a} po-debconf{a} sensible-utils{a} ucf{a} x11proto-dev{a} xorg-sgml-doctools{a} xtrans-dev{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl fluid libarchive-cpio-perl libglib2.0-data libglu1-mesa-dev libltdl-dev libmail-sendmail-perl lynx mesa-vulkan-drivers shared-mime-info wget xdg-user-dirs 0 packages upgraded, 120 newly installed, 0 to remove and 0 not upgraded. Need to get 58.9 MB of archives. After unpacking 206 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-7 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf ucf all 3.0043 [74.0 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf fonts-dejavu-core all 2.37-2 [1069 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf fontconfig-config all 2.13.1-4.2 [281 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf libbrotli1 armhf 1.0.9-2+b2 [262 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf libmd0 armhf 1.0.3-3 [27.4 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf libbsd0 armhf 0.11.3-1 [103 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf libexpat1 armhf 2.2.10-2 [76.3 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf libpng16-16 armhf 1.6.37-3 [277 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf libfreetype6 armhf 2.10.4+dfsg-1 [357 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf libfontconfig1 armhf 2.13.1-4.2 [329 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf libpixman-1-0 armhf 0.40.0-1 [466 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf libxau6 armhf 1:1.0.9-1 [19.0 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf libxdmcp6 armhf 1:1.1.2-3 [24.9 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf libxcb1 armhf 1.14-3 [136 kB] Get: 46 http://deb.debian.org/debian bullseye/main armhf libx11-data all 2:1.7.1-1 [310 kB] Get: 47 http://deb.debian.org/debian bullseye/main armhf libx11-6 armhf 2:1.7.1-1 [712 kB] Get: 48 http://deb.debian.org/debian bullseye/main armhf libxcb-render0 armhf 1.14-3 [110 kB] Get: 49 http://deb.debian.org/debian bullseye/main armhf libxcb-shm0 armhf 1.14-3 [101 kB] Get: 50 http://deb.debian.org/debian bullseye/main armhf libxext6 armhf 2:1.3.3-1.1 [47.8 kB] Get: 51 http://deb.debian.org/debian bullseye/main armhf libxrender1 armhf 1:0.9.10-1 [29.9 kB] Get: 52 http://deb.debian.org/debian bullseye/main armhf libcairo2 armhf 1.16.0-5 [615 kB] Get: 53 http://deb.debian.org/debian bullseye/main armhf libdrm-common all 2.4.104-1 [14.9 kB] Get: 54 http://deb.debian.org/debian bullseye/main armhf libdrm2 armhf 2.4.104-1 [37.7 kB] Get: 55 http://deb.debian.org/debian bullseye/main armhf libdrm-amdgpu1 armhf 2.4.104-1 [27.1 kB] Get: 56 http://deb.debian.org/debian bullseye/main armhf libdrm-nouveau2 armhf 2.4.104-1 [24.6 kB] Get: 57 http://deb.debian.org/debian bullseye/main armhf libdrm-radeon1 armhf 2.4.104-1 [27.6 kB] Get: 58 http://deb.debian.org/debian bullseye/main armhf libedit2 armhf 3.1-20191231-2+b1 [81.1 kB] Get: 59 http://deb.debian.org/debian bullseye/main armhf libglvnd0 armhf 1.3.2-1 [51.8 kB] Get: 60 http://deb.debian.org/debian bullseye/main armhf libwayland-server0 armhf 1.18.0-2~exp1.1 [28.1 kB] Get: 61 http://deb.debian.org/debian bullseye/main armhf libgbm1 armhf 20.3.4-1 [70.1 kB] Get: 62 http://deb.debian.org/debian bullseye/main armhf libglapi-mesa armhf 20.3.4-1 [80.2 kB] Get: 63 http://deb.debian.org/debian bullseye/main armhf libwayland-client0 armhf 1.18.0-2~exp1.1 [22.1 kB] Get: 64 http://deb.debian.org/debian bullseye/main armhf libx11-xcb1 armhf 2:1.7.1-1 [203 kB] Get: 65 http://deb.debian.org/debian bullseye/main armhf libxcb-dri2-0 armhf 1.14-3 [103 kB] Get: 66 http://deb.debian.org/debian bullseye/main armhf libxcb-dri3-0 armhf 1.14-3 [102 kB] Get: 67 http://deb.debian.org/debian bullseye/main armhf libxcb-present0 armhf 1.14-3 [101 kB] Get: 68 http://deb.debian.org/debian bullseye/main armhf libxcb-sync1 armhf 1.14-3 [104 kB] Get: 69 http://deb.debian.org/debian bullseye/main armhf libxcb-xfixes0 armhf 1.14-3 [105 kB] Get: 70 http://deb.debian.org/debian bullseye/main armhf libxshmfence1 armhf 1.3-1 [8592 B] Get: 71 http://deb.debian.org/debian bullseye/main armhf libegl-mesa0 armhf 20.3.4-1 [123 kB] Get: 72 http://deb.debian.org/debian bullseye/main armhf libegl1 armhf 1.3.2-1 [29.5 kB] Get: 73 http://deb.debian.org/debian bullseye/main armhf libxcb-glx0 armhf 1.14-3 [116 kB] Get: 74 http://deb.debian.org/debian bullseye/main armhf libxdamage1 armhf 1:1.1.5-2 [15.1 kB] Get: 75 http://deb.debian.org/debian bullseye/main armhf libxfixes3 armhf 1:5.0.3-2 [20.6 kB] Get: 76 http://deb.debian.org/debian bullseye/main armhf libxxf86vm1 armhf 1:1.1.4-1+b2 [20.2 kB] Get: 77 http://deb.debian.org/debian bullseye/main armhf libz3-4 armhf 4.8.10-1 [5959 kB] Get: 78 http://deb.debian.org/debian bullseye/main armhf libllvm11 armhf 1:11.0.1-2 [15.4 MB] Get: 79 http://deb.debian.org/debian bullseye/main armhf libsensors-config all 1:3.6.0-7 [32.3 kB] Get: 80 http://deb.debian.org/debian bullseye/main armhf libsensors5 armhf 1:3.6.0-7 [49.6 kB] Get: 81 http://deb.debian.org/debian bullseye/main armhf libvulkan1 armhf 1.2.162.0-1 [84.3 kB] Get: 82 http://deb.debian.org/debian bullseye/main armhf libgl1-mesa-dri armhf 20.3.4-1 [6037 kB] Get: 83 http://deb.debian.org/debian bullseye/main armhf libglx-mesa0 armhf 20.3.4-1 [167 kB] Get: 84 http://deb.debian.org/debian bullseye/main armhf libglx0 armhf 1.3.2-1 [32.8 kB] Get: 85 http://deb.debian.org/debian bullseye/main armhf libgl1 armhf 1.3.2-1 [94.3 kB] Get: 86 http://deb.debian.org/debian bullseye/main armhf xorg-sgml-doctools all 1:1.11-1.1 [22.1 kB] Get: 87 http://deb.debian.org/debian bullseye/main armhf x11proto-dev all 2020.1-1 [594 kB] Get: 88 http://deb.debian.org/debian bullseye/main armhf libxau-dev armhf 1:1.0.9-1 [22.4 kB] Get: 89 http://deb.debian.org/debian bullseye/main armhf libxdmcp-dev armhf 1:1.1.2-3 [40.7 kB] Get: 90 http://deb.debian.org/debian bullseye/main armhf xtrans-dev all 1.4.0-1 [98.7 kB] Get: 91 http://deb.debian.org/debian bullseye/main armhf libpthread-stubs0-dev armhf 0.4-1 [5344 B] Get: 92 http://deb.debian.org/debian bullseye/main armhf libxcb1-dev armhf 1.14-3 [175 kB] Get: 93 http://deb.debian.org/debian bullseye/main armhf libx11-dev armhf 2:1.7.1-1 [787 kB] Get: 94 http://deb.debian.org/debian bullseye/main armhf libglx-dev armhf 1.3.2-1 [16.3 kB] Get: 95 http://deb.debian.org/debian bullseye/main armhf libgl-dev armhf 1.3.2-1 [100 kB] Get: 96 http://deb.debian.org/debian bullseye/main armhf libegl-dev armhf 1.3.2-1 [19.6 kB] Get: 97 http://deb.debian.org/debian bullseye/main armhf libxcursor1 armhf 1:1.2.0-2 [34.2 kB] Get: 98 http://deb.debian.org/debian bullseye/main armhf libxft2 armhf 2.3.2-2 [50.1 kB] Get: 99 http://deb.debian.org/debian bullseye/main armhf libxinerama1 armhf 2:1.1.4-2 [17.3 kB] Get: 100 http://deb.debian.org/debian bullseye/main armhf libfltk1.3 armhf 1.3.5-3 [503 kB] Get: 101 http://deb.debian.org/debian bullseye/main armhf libfltk-cairo1.3 armhf 1.3.5-3 [43.4 kB] Get: 102 http://deb.debian.org/debian bullseye/main armhf libfltk-forms1.3 armhf 1.3.5-3 [48.7 kB] Get: 103 http://deb.debian.org/debian bullseye/main armhf libfltk-gl1.3 armhf 1.3.5-3 [69.9 kB] Get: 104 http://deb.debian.org/debian bullseye/main armhf libjpeg62-turbo armhf 1:2.0.6-4 [123 kB] Get: 105 http://deb.debian.org/debian bullseye/main armhf libfltk-images1.3 armhf 1.3.5-3 [60.3 kB] Get: 106 http://deb.debian.org/debian bullseye/main armhf libfltk1.3-dev armhf 1.3.5-3 [807 kB] Get: 107 http://deb.debian.org/debian bullseye/main armhf libgles1 armhf 1.3.2-1 [12.6 kB] Get: 108 http://deb.debian.org/debian bullseye/main armhf libgles2 armhf 1.3.2-1 [18.2 kB] Get: 109 http://deb.debian.org/debian bullseye/main armhf libgles-dev armhf 1.3.2-1 [50.3 kB] Get: 110 http://deb.debian.org/debian bullseye/main armhf libopengl0 armhf 1.3.2-1 [32.7 kB] Get: 111 http://deb.debian.org/debian bullseye/main armhf libopengl-dev armhf 1.3.2-1 [5876 B] Get: 112 http://deb.debian.org/debian bullseye/main armhf libglvnd-dev armhf 1.3.2-1 [13.9 kB] Get: 113 http://deb.debian.org/debian bullseye/main armhf libgl1-mesa-dev armhf 20.3.4-1 [51.1 kB] Get: 114 http://deb.debian.org/debian bullseye/main armhf libglib2.0-0 armhf 2.66.8-1 [1206 kB] Get: 115 http://deb.debian.org/debian bullseye/main armhf libilmbase25 armhf 2.5.4-1 [195 kB] Get: 116 http://deb.debian.org/debian bullseye/main armhf libilmbase-dev armhf 2.5.4-1 [160 kB] Get: 117 http://deb.debian.org/debian bullseye/main armhf libopenexr25 armhf 2.5.4-2 [608 kB] Get: 118 http://deb.debian.org/debian bullseye/main armhf libopenexr-dev armhf 2.5.4-2 [159 kB] Get: 119 http://deb.debian.org/debian bullseye/main armhf pkg-config armhf 0.29.2-1 [62.4 kB] Get: 120 http://deb.debian.org/debian bullseye/main armhf zlib1g-dev armhf 1:1.2.11.dfsg-2 [185 kB] Fetched 58.9 MB in 5s (12.1 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../000-bsdextrautils_2.36.1-7_armhf.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../001-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../002-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../003-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../004-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../005-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../006-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../007-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../008-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../009-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package ucf. Preparing to unpack .../010-ucf_3.0043_all.deb ... Moving old data out of the way Unpacking ucf (3.0043) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../011-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../012-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../013-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../014-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../015-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../016-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../017-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../018-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../019-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../020-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../021-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../022-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../023-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../024-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../025-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../026-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../027-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../028-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../029-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../030-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../031-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package fonts-dejavu-core. Preparing to unpack .../032-fonts-dejavu-core_2.37-2_all.deb ... Unpacking fonts-dejavu-core (2.37-2) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../033-fontconfig-config_2.13.1-4.2_all.deb ... Unpacking fontconfig-config (2.13.1-4.2) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../034-libbrotli1_1.0.9-2+b2_armhf.deb ... Unpacking libbrotli1:armhf (1.0.9-2+b2) ... Selecting previously unselected package libmd0:armhf. Preparing to unpack .../035-libmd0_1.0.3-3_armhf.deb ... Unpacking libmd0:armhf (1.0.3-3) ... Selecting previously unselected package libbsd0:armhf. Preparing to unpack .../036-libbsd0_0.11.3-1_armhf.deb ... Unpacking libbsd0:armhf (0.11.3-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../037-libexpat1_2.2.10-2_armhf.deb ... Unpacking libexpat1:armhf (2.2.10-2) ... Selecting previously unselected package libpng16-16:armhf. Preparing to unpack .../038-libpng16-16_1.6.37-3_armhf.deb ... Unpacking libpng16-16:armhf (1.6.37-3) ... Selecting previously unselected package libfreetype6:armhf. Preparing to unpack .../039-libfreetype6_2.10.4+dfsg-1_armhf.deb ... Unpacking libfreetype6:armhf (2.10.4+dfsg-1) ... Selecting previously unselected package libfontconfig1:armhf. Preparing to unpack .../040-libfontconfig1_2.13.1-4.2_armhf.deb ... Unpacking libfontconfig1:armhf (2.13.1-4.2) ... Selecting previously unselected package libpixman-1-0:armhf. Preparing to unpack .../041-libpixman-1-0_0.40.0-1_armhf.deb ... Unpacking libpixman-1-0:armhf (0.40.0-1) ... Selecting previously unselected package libxau6:armhf. Preparing to unpack .../042-libxau6_1%3a1.0.9-1_armhf.deb ... Unpacking libxau6:armhf (1:1.0.9-1) ... Selecting previously unselected package libxdmcp6:armhf. Preparing to unpack .../043-libxdmcp6_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp6:armhf (1:1.1.2-3) ... Selecting previously unselected package libxcb1:armhf. Preparing to unpack .../044-libxcb1_1.14-3_armhf.deb ... Unpacking libxcb1:armhf (1.14-3) ... Selecting previously unselected package libx11-data. Preparing to unpack .../045-libx11-data_2%3a1.7.1-1_all.deb ... Unpacking libx11-data (2:1.7.1-1) ... Selecting previously unselected package libx11-6:armhf. Preparing to unpack .../046-libx11-6_2%3a1.7.1-1_armhf.deb ... Unpacking libx11-6:armhf (2:1.7.1-1) ... Selecting previously unselected package libxcb-render0:armhf. Preparing to unpack .../047-libxcb-render0_1.14-3_armhf.deb ... Unpacking libxcb-render0:armhf (1.14-3) ... Selecting previously unselected package libxcb-shm0:armhf. Preparing to unpack .../048-libxcb-shm0_1.14-3_armhf.deb ... Unpacking libxcb-shm0:armhf (1.14-3) ... Selecting previously unselected package libxext6:armhf. Preparing to unpack .../049-libxext6_2%3a1.3.3-1.1_armhf.deb ... Unpacking libxext6:armhf (2:1.3.3-1.1) ... Selecting previously unselected package libxrender1:armhf. Preparing to unpack .../050-libxrender1_1%3a0.9.10-1_armhf.deb ... Unpacking libxrender1:armhf (1:0.9.10-1) ... Selecting previously unselected package libcairo2:armhf. Preparing to unpack .../051-libcairo2_1.16.0-5_armhf.deb ... Unpacking libcairo2:armhf (1.16.0-5) ... Selecting previously unselected package libdrm-common. Preparing to unpack .../052-libdrm-common_2.4.104-1_all.deb ... Unpacking libdrm-common (2.4.104-1) ... Selecting previously unselected package libdrm2:armhf. Preparing to unpack .../053-libdrm2_2.4.104-1_armhf.deb ... Unpacking libdrm2:armhf (2.4.104-1) ... Selecting previously unselected package libdrm-amdgpu1:armhf. Preparing to unpack .../054-libdrm-amdgpu1_2.4.104-1_armhf.deb ... Unpacking libdrm-amdgpu1:armhf (2.4.104-1) ... Selecting previously unselected package libdrm-nouveau2:armhf. Preparing to unpack .../055-libdrm-nouveau2_2.4.104-1_armhf.deb ... Unpacking libdrm-nouveau2:armhf (2.4.104-1) ... Selecting previously unselected package libdrm-radeon1:armhf. Preparing to unpack .../056-libdrm-radeon1_2.4.104-1_armhf.deb ... Unpacking libdrm-radeon1:armhf (2.4.104-1) ... Selecting previously unselected package libedit2:armhf. Preparing to unpack .../057-libedit2_3.1-20191231-2+b1_armhf.deb ... Unpacking libedit2:armhf (3.1-20191231-2+b1) ... Selecting previously unselected package libglvnd0:armhf. Preparing to unpack .../058-libglvnd0_1.3.2-1_armhf.deb ... Unpacking libglvnd0:armhf (1.3.2-1) ... Selecting previously unselected package libwayland-server0:armhf. Preparing to unpack .../059-libwayland-server0_1.18.0-2~exp1.1_armhf.deb ... Unpacking libwayland-server0:armhf (1.18.0-2~exp1.1) ... Selecting previously unselected package libgbm1:armhf. Preparing to unpack .../060-libgbm1_20.3.4-1_armhf.deb ... Unpacking libgbm1:armhf (20.3.4-1) ... Selecting previously unselected package libglapi-mesa:armhf. Preparing to unpack .../061-libglapi-mesa_20.3.4-1_armhf.deb ... Unpacking libglapi-mesa:armhf (20.3.4-1) ... Selecting previously unselected package libwayland-client0:armhf. Preparing to unpack .../062-libwayland-client0_1.18.0-2~exp1.1_armhf.deb ... Unpacking libwayland-client0:armhf (1.18.0-2~exp1.1) ... Selecting previously unselected package libx11-xcb1:armhf. Preparing to unpack .../063-libx11-xcb1_2%3a1.7.1-1_armhf.deb ... Unpacking libx11-xcb1:armhf (2:1.7.1-1) ... Selecting previously unselected package libxcb-dri2-0:armhf. Preparing to unpack .../064-libxcb-dri2-0_1.14-3_armhf.deb ... Unpacking libxcb-dri2-0:armhf (1.14-3) ... Selecting previously unselected package libxcb-dri3-0:armhf. Preparing to unpack .../065-libxcb-dri3-0_1.14-3_armhf.deb ... Unpacking libxcb-dri3-0:armhf (1.14-3) ... Selecting previously unselected package libxcb-present0:armhf. Preparing to unpack .../066-libxcb-present0_1.14-3_armhf.deb ... Unpacking libxcb-present0:armhf (1.14-3) ... Selecting previously unselected package libxcb-sync1:armhf. Preparing to unpack .../067-libxcb-sync1_1.14-3_armhf.deb ... Unpacking libxcb-sync1:armhf (1.14-3) ... Selecting previously unselected package libxcb-xfixes0:armhf. Preparing to unpack .../068-libxcb-xfixes0_1.14-3_armhf.deb ... Unpacking libxcb-xfixes0:armhf (1.14-3) ... Selecting previously unselected package libxshmfence1:armhf. Preparing to unpack .../069-libxshmfence1_1.3-1_armhf.deb ... Unpacking libxshmfence1:armhf (1.3-1) ... Selecting previously unselected package libegl-mesa0:armhf. Preparing to unpack .../070-libegl-mesa0_20.3.4-1_armhf.deb ... Unpacking libegl-mesa0:armhf (20.3.4-1) ... Selecting previously unselected package libegl1:armhf. Preparing to unpack .../071-libegl1_1.3.2-1_armhf.deb ... Unpacking libegl1:armhf (1.3.2-1) ... Selecting previously unselected package libxcb-glx0:armhf. Preparing to unpack .../072-libxcb-glx0_1.14-3_armhf.deb ... Unpacking libxcb-glx0:armhf (1.14-3) ... Selecting previously unselected package libxdamage1:armhf. Preparing to unpack .../073-libxdamage1_1%3a1.1.5-2_armhf.deb ... Unpacking libxdamage1:armhf (1:1.1.5-2) ... Selecting previously unselected package libxfixes3:armhf. Preparing to unpack .../074-libxfixes3_1%3a5.0.3-2_armhf.deb ... Unpacking libxfixes3:armhf (1:5.0.3-2) ... Selecting previously unselected package libxxf86vm1:armhf. Preparing to unpack .../075-libxxf86vm1_1%3a1.1.4-1+b2_armhf.deb ... Unpacking libxxf86vm1:armhf (1:1.1.4-1+b2) ... Selecting previously unselected package libz3-4:armhf. Preparing to unpack .../076-libz3-4_4.8.10-1_armhf.deb ... Unpacking libz3-4:armhf (4.8.10-1) ... Selecting previously unselected package libllvm11:armhf. Preparing to unpack .../077-libllvm11_1%3a11.0.1-2_armhf.deb ... Unpacking libllvm11:armhf (1:11.0.1-2) ... Selecting previously unselected package libsensors-config. Preparing to unpack .../078-libsensors-config_1%3a3.6.0-7_all.deb ... Unpacking libsensors-config (1:3.6.0-7) ... Selecting previously unselected package libsensors5:armhf. Preparing to unpack .../079-libsensors5_1%3a3.6.0-7_armhf.deb ... Unpacking libsensors5:armhf (1:3.6.0-7) ... Selecting previously unselected package libvulkan1:armhf. Preparing to unpack .../080-libvulkan1_1.2.162.0-1_armhf.deb ... Unpacking libvulkan1:armhf (1.2.162.0-1) ... Selecting previously unselected package libgl1-mesa-dri:armhf. Preparing to unpack .../081-libgl1-mesa-dri_20.3.4-1_armhf.deb ... Unpacking libgl1-mesa-dri:armhf (20.3.4-1) ... Selecting previously unselected package libglx-mesa0:armhf. Preparing to unpack .../082-libglx-mesa0_20.3.4-1_armhf.deb ... Unpacking libglx-mesa0:armhf (20.3.4-1) ... Selecting previously unselected package libglx0:armhf. Preparing to unpack .../083-libglx0_1.3.2-1_armhf.deb ... Unpacking libglx0:armhf (1.3.2-1) ... Selecting previously unselected package libgl1:armhf. Preparing to unpack .../084-libgl1_1.3.2-1_armhf.deb ... Unpacking libgl1:armhf (1.3.2-1) ... Selecting previously unselected package xorg-sgml-doctools. Preparing to unpack .../085-xorg-sgml-doctools_1%3a1.11-1.1_all.deb ... Unpacking xorg-sgml-doctools (1:1.11-1.1) ... Selecting previously unselected package x11proto-dev. Preparing to unpack .../086-x11proto-dev_2020.1-1_all.deb ... Unpacking x11proto-dev (2020.1-1) ... Selecting previously unselected package libxau-dev:armhf. Preparing to unpack .../087-libxau-dev_1%3a1.0.9-1_armhf.deb ... Unpacking libxau-dev:armhf (1:1.0.9-1) ... Selecting previously unselected package libxdmcp-dev:armhf. Preparing to unpack .../088-libxdmcp-dev_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp-dev:armhf (1:1.1.2-3) ... Selecting previously unselected package xtrans-dev. Preparing to unpack .../089-xtrans-dev_1.4.0-1_all.deb ... Unpacking xtrans-dev (1.4.0-1) ... Selecting previously unselected package libpthread-stubs0-dev:armhf. Preparing to unpack .../090-libpthread-stubs0-dev_0.4-1_armhf.deb ... Unpacking libpthread-stubs0-dev:armhf (0.4-1) ... Selecting previously unselected package libxcb1-dev:armhf. Preparing to unpack .../091-libxcb1-dev_1.14-3_armhf.deb ... Unpacking libxcb1-dev:armhf (1.14-3) ... Selecting previously unselected package libx11-dev:armhf. Preparing to unpack .../092-libx11-dev_2%3a1.7.1-1_armhf.deb ... Unpacking libx11-dev:armhf (2:1.7.1-1) ... Selecting previously unselected package libglx-dev:armhf. Preparing to unpack .../093-libglx-dev_1.3.2-1_armhf.deb ... Unpacking libglx-dev:armhf (1.3.2-1) ... Selecting previously unselected package libgl-dev:armhf. Preparing to unpack .../094-libgl-dev_1.3.2-1_armhf.deb ... Unpacking libgl-dev:armhf (1.3.2-1) ... Selecting previously unselected package libegl-dev:armhf. Preparing to unpack .../095-libegl-dev_1.3.2-1_armhf.deb ... Unpacking libegl-dev:armhf (1.3.2-1) ... Selecting previously unselected package libxcursor1:armhf. Preparing to unpack .../096-libxcursor1_1%3a1.2.0-2_armhf.deb ... Unpacking libxcursor1:armhf (1:1.2.0-2) ... Selecting previously unselected package libxft2:armhf. Preparing to unpack .../097-libxft2_2.3.2-2_armhf.deb ... Unpacking libxft2:armhf (2.3.2-2) ... Selecting previously unselected package libxinerama1:armhf. Preparing to unpack .../098-libxinerama1_2%3a1.1.4-2_armhf.deb ... Unpacking libxinerama1:armhf (2:1.1.4-2) ... Selecting previously unselected package libfltk1.3:armhf. Preparing to unpack .../099-libfltk1.3_1.3.5-3_armhf.deb ... Unpacking libfltk1.3:armhf (1.3.5-3) ... Selecting previously unselected package libfltk-cairo1.3:armhf. Preparing to unpack .../100-libfltk-cairo1.3_1.3.5-3_armhf.deb ... Unpacking libfltk-cairo1.3:armhf (1.3.5-3) ... Selecting previously unselected package libfltk-forms1.3:armhf. Preparing to unpack .../101-libfltk-forms1.3_1.3.5-3_armhf.deb ... Unpacking libfltk-forms1.3:armhf (1.3.5-3) ... Selecting previously unselected package libfltk-gl1.3:armhf. Preparing to unpack .../102-libfltk-gl1.3_1.3.5-3_armhf.deb ... Unpacking libfltk-gl1.3:armhf (1.3.5-3) ... Selecting previously unselected package libjpeg62-turbo:armhf. Preparing to unpack .../103-libjpeg62-turbo_1%3a2.0.6-4_armhf.deb ... Unpacking libjpeg62-turbo:armhf (1:2.0.6-4) ... Selecting previously unselected package libfltk-images1.3:armhf. Preparing to unpack .../104-libfltk-images1.3_1.3.5-3_armhf.deb ... Unpacking libfltk-images1.3:armhf (1.3.5-3) ... Selecting previously unselected package libfltk1.3-dev. Preparing to unpack .../105-libfltk1.3-dev_1.3.5-3_armhf.deb ... Unpacking libfltk1.3-dev (1.3.5-3) ... Selecting previously unselected package libgles1:armhf. Preparing to unpack .../106-libgles1_1.3.2-1_armhf.deb ... Unpacking libgles1:armhf (1.3.2-1) ... Selecting previously unselected package libgles2:armhf. Preparing to unpack .../107-libgles2_1.3.2-1_armhf.deb ... Unpacking libgles2:armhf (1.3.2-1) ... Selecting previously unselected package libgles-dev:armhf. Preparing to unpack .../108-libgles-dev_1.3.2-1_armhf.deb ... Unpacking libgles-dev:armhf (1.3.2-1) ... Selecting previously unselected package libopengl0:armhf. Preparing to unpack .../109-libopengl0_1.3.2-1_armhf.deb ... Unpacking libopengl0:armhf (1.3.2-1) ... Selecting previously unselected package libopengl-dev:armhf. Preparing to unpack .../110-libopengl-dev_1.3.2-1_armhf.deb ... Unpacking libopengl-dev:armhf (1.3.2-1) ... Selecting previously unselected package libglvnd-dev:armhf. Preparing to unpack .../111-libglvnd-dev_1.3.2-1_armhf.deb ... Unpacking libglvnd-dev:armhf (1.3.2-1) ... Selecting previously unselected package libgl1-mesa-dev:armhf. Preparing to unpack .../112-libgl1-mesa-dev_20.3.4-1_armhf.deb ... Unpacking libgl1-mesa-dev:armhf (20.3.4-1) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../113-libglib2.0-0_2.66.8-1_armhf.deb ... Unpacking libglib2.0-0:armhf (2.66.8-1) ... Selecting previously unselected package libilmbase25:armhf. Preparing to unpack .../114-libilmbase25_2.5.4-1_armhf.deb ... Unpacking libilmbase25:armhf (2.5.4-1) ... Selecting previously unselected package libilmbase-dev:armhf. Preparing to unpack .../115-libilmbase-dev_2.5.4-1_armhf.deb ... Unpacking libilmbase-dev:armhf (2.5.4-1) ... Selecting previously unselected package libopenexr25:armhf. Preparing to unpack .../116-libopenexr25_2.5.4-2_armhf.deb ... Unpacking libopenexr25:armhf (2.5.4-2) ... Selecting previously unselected package libopenexr-dev. Preparing to unpack .../117-libopenexr-dev_2.5.4-2_armhf.deb ... Unpacking libopenexr-dev (2.5.4-2) ... Selecting previously unselected package pkg-config. Preparing to unpack .../118-pkg-config_0.29.2-1_armhf.deb ... Unpacking pkg-config (0.29.2-1) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../119-zlib1g-dev_1%3a1.2.11.dfsg-2_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-2) ... Setting up libexpat1:armhf (2.2.10-2) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up libpixman-1-0:armhf (0.40.0-1) ... Setting up libwayland-server0:armhf (1.18.0-2~exp1.1) ... Setting up libxau6:armhf (1:1.0.9-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libglib2.0-0:armhf (2.66.8-1) ... No schema files found: doing nothing. Setting up libglvnd0:armhf (1.3.2-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libbrotli1:armhf (1.0.9-2+b2) ... Setting up libsensors-config (1:3.6.0-7) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up libilmbase25:armhf (2.5.4-1) ... Setting up file (1:5.39-3) ... Setting up libpthread-stubs0-dev:armhf (0.4-1) ... Setting up libopengl0:armhf (1.3.2-1) ... Setting up libopenexr25:armhf (2.5.4-2) ... Setting up xtrans-dev (1.4.0-1) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libz3-4:armhf (4.8.10-1) ... Setting up libgles2:armhf (1.3.2-1) ... Setting up libjpeg62-turbo:armhf (1:2.0.6-4) ... Setting up libx11-data (2:1.7.1-1) ... Setting up libgles1:armhf (1.3.2-1) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up libpng16-16:armhf (1.6.37-3) ... Setting up autopoint (0.21-4) ... Setting up pkg-config (0.29.2-1) ... Setting up fonts-dejavu-core (2.37-2) ... Setting up libsensors5:armhf (1:3.6.0-7) ... Setting up libglapi-mesa:armhf (20.3.4-1) ... Setting up libvulkan1:armhf (1.2.162.0-1) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-2) ... Setting up libmd0:armhf (1.0.3-3) ... Setting up sensible-utils (0.0.14) ... Setting up libxshmfence1:armhf (1.3-1) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up xorg-sgml-doctools (1:1.11-1.1) ... Setting up libopengl-dev:armhf (1.3.2-1) ... Setting up libbsd0:armhf (0.11.3-1) ... Setting up libdrm-common (2.4.104-1) ... Setting up libelf1:armhf (0.183-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libilmbase-dev:armhf (2.5.4-1) ... Setting up libwayland-client0:armhf (1.18.0-2~exp1.1) ... Setting up x11proto-dev (2020.1-1) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up libxdmcp6:armhf (1:1.1.2-3) ... Setting up libxcb1:armhf (1.14-3) ... Setting up gettext (0.21-4) ... Setting up libxcb-xfixes0:armhf (1.14-3) ... Setting up libxau-dev:armhf (1:1.0.9-1) ... Setting up libtool (2.4.6-15) ... Setting up libxcb-render0:armhf (1.14-3) ... Setting up libxcb-glx0:armhf (1.14-3) ... Setting up libedit2:armhf (3.1-20191231-2+b1) ... Setting up m4 (1.4.18-5) ... Setting up libxcb-shm0:armhf (1.14-3) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libxcb-present0:armhf (1.14-3) ... Setting up libxdmcp-dev:armhf (1:1.1.2-3) ... Setting up libopenexr-dev (2.5.4-2) ... Setting up libllvm11:armhf (1:11.0.1-2) ... Setting up libfreetype6:armhf (2.10.4+dfsg-1) ... Setting up libxcb-sync1:armhf (1.14-3) ... Setting up ucf (3.0043) ... Setting up autoconf (2.69-14) ... Setting up libxcb-dri2-0:armhf (1.14-3) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up libdrm2:armhf (2.4.104-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up libx11-6:armhf (2:1.7.1-1) ... Setting up libdrm-amdgpu1:armhf (2.4.104-1) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libxcb-dri3-0:armhf (1.14-3) ... Setting up libx11-xcb1:armhf (2:1.7.1-1) ... Setting up libdrm-nouveau2:armhf (2.4.104-1) ... Setting up libxdamage1:armhf (1:1.1.5-2) ... Setting up libxcb1-dev:armhf (1.14-3) ... Setting up libxrender1:armhf (1:0.9.10-1) ... Setting up libgbm1:armhf (20.3.4-1) ... Setting up libdrm-radeon1:armhf (2.4.104-1) ... Setting up fontconfig-config (2.13.1-4.2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libgl1-mesa-dri:armhf (20.3.4-1) ... Setting up libx11-dev:armhf (2:1.7.1-1) ... Setting up libxext6:armhf (2:1.3.3-1.1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libxxf86vm1:armhf (1:1.1.4-1+b2) ... Setting up dh-autoreconf (20) ... Setting up libegl-mesa0:armhf (20.3.4-1) ... Setting up libxfixes3:armhf (1:5.0.3-2) ... Setting up libxinerama1:armhf (2:1.1.4-2) ... Setting up libegl1:armhf (1.3.2-1) ... Setting up libfontconfig1:armhf (2.13.1-4.2) ... Setting up libxft2:armhf (2.3.2-2) ... Setting up libglx-mesa0:armhf (20.3.4-1) ... Setting up libglx0:armhf (1.3.2-1) ... Setting up libxcursor1:armhf (1:1.2.0-2) ... Setting up debhelper (13.3.4) ... Setting up libcairo2:armhf (1.16.0-5) ... Setting up libgl1:armhf (1.3.2-1) ... Setting up libglx-dev:armhf (1.3.2-1) ... Setting up libgl-dev:armhf (1.3.2-1) ... Setting up libegl-dev:armhf (1.3.2-1) ... Setting up libfltk1.3:armhf (1.3.5-3) ... Setting up libfltk-gl1.3:armhf (1.3.5-3) ... Setting up libfltk-cairo1.3:armhf (1.3.5-3) ... Setting up libfltk-images1.3:armhf (1.3.5-3) ... Setting up libfltk-forms1.3:armhf (1.3.5-3) ... Setting up libgles-dev:armhf (1.3.2-1) ... Setting up libfltk1.3-dev (1.3.5-3) ... Setting up libglvnd-dev:armhf (1.3.2-1) ... Setting up libgl1-mesa-dev:armhf (20.3.4-1) ... Processing triggers for libc-bin (2.31-12) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/openexr-viewers-2.3.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../openexr-viewers_2.3.0-1_source.changes dpkg-buildpackage: info: source package openexr-viewers dpkg-buildpackage: info: source version 2.3.0-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Pino Toscano dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config debian/rules override_dh_autoreconf make[1]: Entering directory '/build/openexr-viewers-2.3.0' dh_autoreconf ./bootstrap running aclocal -I m4 ... running libtoolize --automake --copy ... running automake --add-missing --copy --foreign ... configure.ac:20: installing './compile' exrdisplay/Makefile.am:7: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') playexr/Makefile.am:9: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') running autoconf ... Now type './configure' to configure OpenEXR_Viewers. make[1]: Leaving directory '/build/openexr-viewers-2.3.0' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/openexr-viewers-2.3.0' dh_auto_configure -- --disable-openexrctltest ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --disable-openexrctltest checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of g++... none checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking whether ln -s works... yes checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether make sets $(MAKE)... (cached) yes LIB64_IF_EXISTS ... test_prefix = NONE checking for pkg-config... /usr/bin/pkg-config using pkg-config to set OPENEXR_CXXFLAGS and OPENEXR_LDFLAGS: OPENEXR_CXXFLAGS = -pthread -I/usr/include/OpenEXR OPENEXR_LDFLAGS = OPENEXR_LIBS = -lIlmImf-2_5 -lImath-2_5 -lHalf-2_5 -lIex-2_5 -lIexMath-2_5 -lIlmThread-2_5 -pthread test_prefix = NONE checking for pkg-config... (cached) /usr/bin/pkg-config using pkg-config to set OPENEXR_CTL_CXXFLAGS and OPENEXR_CTL_LDFLAGS: Package OpenEXR_CTL was not found in the pkg-config search path. Perhaps you should add the directory containing `OpenEXR_CTL.pc' to the PKG_CONFIG_PATH environment variable No package 'OpenEXR_CTL' found Package OpenEXR_CTL was not found in the pkg-config search path. Perhaps you should add the directory containing `OpenEXR_CTL.pc' to the PKG_CONFIG_PATH environment variable No package 'OpenEXR_CTL' found Package OpenEXR_CTL was not found in the pkg-config search path. Perhaps you should add the directory containing `OpenEXR_CTL.pc' to the PKG_CONFIG_PATH environment variable No package 'OpenEXR_CTL' found using prefix to set OPENEXR_CTL_CXXFLAGS and OPENEXR_CTL_LDFLAGS: OPENEXR_CTL_CXXFLAGS = -I/usr/include/OpenEXR -I/usr/include/CTL OPENEXR_CTL_LDFLAGS = -L/usr/lib OPENEXR_CTL_LIBS = -lIlmImfCtl -lIlmImf -lz -lImath -lHalf -lIex -lIlmThread -lpthread -lIlmCtlSimd -lIlmCtlMath -lIlmCtl checking whether g++ supports C++14 features by default... yes checking for OpenEXR... yes Compiled and ran OpenEXR test program. checking for OpenEXR_CTL... no *** Could not run the OpenEXR_CTL test program, checking why... *** The test program could not be compiled. Is OpenEXR_CTL installed? *** Check that the cflags (below) includes the OpenEXR_CTL include directory *** *** Flags used by the test: *** cflags: -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -I/usr/include/OpenEXR -I/usr/include/CTL *** ldflags: -Wl,-z,relro -L/usr/lib *** *** You can also run configure with --disable-openexrctltest to skip this test. The OpenEXR_CTL package could not be found. Will build and install playexr and exrdisplay without ctl support. checking for fltk-config... /usr/bin/fltk-config checking for FLTK with GL support... yes --------------------------------------------- Fltk setup: FLTK_CXXFLAGS -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 FLTK_LDFLAGS -lfltk_gl -lfltk -lX11 --------------------------------------------- checking for Cg... no *** The Cg test program could not be compiled. *** Possible reasons: *** - The Cg libraries and includes are not installed. *** - configure cannot find Cg (use the *** --with-cg-prefix option to tell configure where *** to find it). *** - Your version of Cg is out of date. Please update it *** to the latest version. *** *** The exrdisplay program will not be built with fragment shader *** support because the fragment shader support depends on Cg. checking for ANSI C header files... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for unistd.h... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking for gcc optimization flags... -pipe checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config/Makefile config.status: creating exrdisplay/Makefile config.status: creating playexr/Makefile config.status: creating doc/Makefile config.status: creating config/OpenEXR_ViewersConfig.h config.status: executing depfiles commands config.status: executing libtool commands --------------------------------------------- Summary for OpenEXR features: build exrdisplay FLTK application yes with fragment shader support no ctl support no --------------------------------------------- make[1]: Leaving directory '/build/openexr-viewers-2.3.0' dh_auto_build make -j3 make[1]: Entering directory '/build/openexr-viewers-2.3.0' Making all in playexr make[2]: Entering directory '/build/openexr-viewers-2.3.0/playexr' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/openexr-viewers-2.3.0/playexr' Making all in exrdisplay make[2]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay' g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o main.o main.cpp g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o ImageView.o ImageView.cpp g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o loadImage.o loadImage.cpp g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o scaleImage.o scaleImage.cpp g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o applyCtl.o applyCtl.cpp g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/usr/include/OpenEXR -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I.. -DHAVE_CTL_INTERPRETER=0 -pthread -I/usr/include/OpenEXR -Wdate-time -D_FORTIFY_SOURCE=2 -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -c -o GlWindow3d.o GlWindow3d.cpp /usr/bin/fltk-config --post exrdisplay /bin/bash ../libtool --tag=CXX --mode=link g++ -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -Wl,-z,relro -o exrdisplay main.o ImageView.o loadImage.o scaleImage.o applyCtl.o GlWindow3d.o -lGL -lIlmImf-2_5 -lImath-2_5 -lHalf-2_5 -lIex-2_5 -lIexMath-2_5 -lIlmThread-2_5 -pthread -DHAVE_CTL_INTERPRETER=0 -DHAVE_CTL_INTERPRETER=0 -lIlmImf-2_5 -lImath-2_5 -lHalf-2_5 -lIex-2_5 -lIexMath-2_5 -lIlmThread-2_5 -pthread -lfltk_gl -lfltk -lX11 libtool: link: g++ -pipe -g -O2 -fdebug-prefix-map=/build/openexr-viewers-2.3.0=. -fstack-protector-strong -Wformat -Werror=format-security -std=c++14 -Wl,-z -Wl,relro -o exrdisplay main.o ImageView.o loadImage.o scaleImage.o applyCtl.o GlWindow3d.o -pthread -DHAVE_CTL_INTERPRETER=0 -DHAVE_CTL_INTERPRETER=0 -pthread -lGL -lIlmImf-2_5 -lImath-2_5 -lHalf-2_5 -lIex-2_5 -lIexMath-2_5 -lIlmThread-2_5 -lfltk_gl -lfltk -lX11 -pthread make[2]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay' Making all in doc make[2]: Entering directory '/build/openexr-viewers-2.3.0/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/openexr-viewers-2.3.0/doc' Making all in config make[2]: Entering directory '/build/openexr-viewers-2.3.0/config' make all-am make[3]: Entering directory '/build/openexr-viewers-2.3.0/config' make[3]: Leaving directory '/build/openexr-viewers-2.3.0/config' make[2]: Leaving directory '/build/openexr-viewers-2.3.0/config' make[2]: Entering directory '/build/openexr-viewers-2.3.0' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/openexr-viewers-2.3.0' make[1]: Leaving directory '/build/openexr-viewers-2.3.0' dh_auto_test make -j3 check VERBOSE=1 make[1]: Entering directory '/build/openexr-viewers-2.3.0' Making check in playexr make[2]: Entering directory '/build/openexr-viewers-2.3.0/playexr' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/openexr-viewers-2.3.0/playexr' Making check in exrdisplay make[2]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay' /usr/bin/fltk-config --post exrdisplay make[2]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay' Making check in doc make[2]: Entering directory '/build/openexr-viewers-2.3.0/doc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/openexr-viewers-2.3.0/doc' Making check in config make[2]: Entering directory '/build/openexr-viewers-2.3.0/config' make[2]: Leaving directory '/build/openexr-viewers-2.3.0/config' make[2]: Entering directory '/build/openexr-viewers-2.3.0' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/build/openexr-viewers-2.3.0' make[1]: Leaving directory '/build/openexr-viewers-2.3.0' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/openexr-viewers-2.3.0' dh_auto_install make -j1 install DESTDIR=/build/openexr-viewers-2.3.0/debian/openexr-viewers AM_UPDATE_INFO_DIR=no make[2]: Entering directory '/build/openexr-viewers-2.3.0' Making install in playexr make[3]: Entering directory '/build/openexr-viewers-2.3.0/playexr' make[4]: Entering directory '/build/openexr-viewers-2.3.0/playexr' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/openexr-viewers-2.3.0/playexr' make[3]: Leaving directory '/build/openexr-viewers-2.3.0/playexr' Making install in exrdisplay make[3]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay' /usr/bin/fltk-config --post exrdisplay make[4]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay' /bin/mkdir -p '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c exrdisplay '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/bin' libtool: install: /usr/bin/install -c exrdisplay /build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/bin/exrdisplay make install-exec-hook make[5]: Entering directory '/build/openexr-viewers-2.3.0/exrdisplay' /usr/bin/fltk-config --post /build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/bin/exrdisplay make[5]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay' make[3]: Leaving directory '/build/openexr-viewers-2.3.0/exrdisplay' Making install in doc make[3]: Entering directory '/build/openexr-viewers-2.3.0/doc' make[4]: Entering directory '/build/openexr-viewers-2.3.0/doc' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/share/doc/OpenEXR_Viewers-2.3.0' /usr/bin/install -c -m 644 OpenEXRViewers.odt OpenEXRViewers.pdf '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/share/doc/OpenEXR_Viewers-2.3.0' make[4]: Leaving directory '/build/openexr-viewers-2.3.0/doc' make[3]: Leaving directory '/build/openexr-viewers-2.3.0/doc' Making install in config make[3]: Entering directory '/build/openexr-viewers-2.3.0/config' make[4]: Entering directory '/build/openexr-viewers-2.3.0/config' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/include/OpenEXR' /usr/bin/install -c -m 644 OpenEXR_ViewersConfig.h '/build/openexr-viewers-2.3.0/debian/openexr-viewers/usr/include/OpenEXR' make[4]: Leaving directory '/build/openexr-viewers-2.3.0/config' make[3]: Leaving directory '/build/openexr-viewers-2.3.0/config' make[3]: Entering directory '/build/openexr-viewers-2.3.0' make[4]: Entering directory '/build/openexr-viewers-2.3.0' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/openexr-viewers-2.3.0' make[3]: Leaving directory '/build/openexr-viewers-2.3.0' make[2]: Leaving directory '/build/openexr-viewers-2.3.0' # remove development-like files rm -rf debian/openexr-viewers/usr/include/ # move documentation to the right place mv debian/openexr-viewers/usr/share/doc/OpenEXR_Viewers-*/ debian/openexr-viewers/usr/share/doc/openexr-viewers # remove documentation bits which we are not interested about rm debian/openexr-viewers/usr/share/doc/openexr-viewers/*.odt make[1]: Leaving directory '/build/openexr-viewers-2.3.0' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism debian/rules override_dh_compress make[1]: Entering directory '/build/openexr-viewers-2.3.0' dh_compress -X.pdf make[1]: Leaving directory '/build/openexr-viewers-2.3.0' dh_fixperms dh_missing dh_dwz dh_strip dh_makeshlibs dh_shlibdeps dpkg-shlibdeps: warning: debian/openexr-viewers/usr/bin/exrdisplay contains an unresolvable reference to symbol __aeabi_atexit@CXXABI_ARM_1.3.3: it's probably a plugin dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'openexr-viewers-dbgsym' in '../openexr-viewers-dbgsym_2.3.0-1_armhf.deb'. dpkg-deb: building package 'openexr-viewers' in '../openexr-viewers_2.3.0-1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../openexr-viewers_2.3.0-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/27733 and its subdirectories I: Current time: Wed Jul 21 20:04:33 -12 2021 I: pbuilder-time-stamp: 1626941073 Thu Jul 22 08:04:44 UTC 2021 I: 1st build successful. Starting 2nd build on remote node cbxi4pro0-armhf-rb.debian.net. Thu Jul 22 08:04:44 UTC 2021 I: Preparing to do remote build '2' on cbxi4pro0-armhf-rb.debian.net. Thu Jul 22 08:22:05 UTC 2021 I: Deleting $TMPDIR on cbxi4pro0-armhf-rb.debian.net. Thu Jul 22 08:22:08 UTC 2021 I: openexr-viewers_2.3.0-1_armhf.changes: Format: 1.8 Date: Sun, 05 Apr 2020 11:13:58 +0200 Source: openexr-viewers Binary: openexr-viewers openexr-viewers-dbgsym Architecture: armhf Version: 2.3.0-1 Distribution: unstable Urgency: medium Maintainer: Pino Toscano Changed-By: Pino Toscano Description: openexr-viewers - viewer for images in the OpenEXR format Changes: openexr-viewers (2.3.0-1) unstable; urgency=medium . * New upstream release. * Update the patches: - 001_fixctldetection.diff: drop, fixed upstream - 002_gcc43.diff: drop, fixed upstream - 003_gcc44.diff: drop, fixed upstream - 004_link_gl.diff: refresh, and rename to link_gl.diff * Bump the debhelper compatibility to 12: - switch the debhelper build dependency to debhelper-compat 12 - remove debian/compat - stop explicitly using the autotools_dev dh addon, as it is used by default with the autoreconf - drop the autotools-dev build dependency - stop passing --list-missing to dh_missing, as it is done by default - use the upstream bootstrap script for autoreconf * Explicitly add the pkg-config build dependency. * Remove extra empty line at the end of control. * Use https in Homepage. * Use https in the watch file (even if the location is old). * Bump Standards-Version to 4.5.0, no changes required. * Simplify the installation: - do not force debian/tmp as destdir, but rather install in the package location - pick the documentation from that location - remove the files that we do not want - remove debian/install and debian/openexr-viewers.docs, no more needed now * Switch from FLTK 1.1 to FLTK 1.3: - replace the libfltk1.1-dev build dependency with libfltk1.3-dev Checksums-Sha1: 68989e29cd2705e738073199bccf937eacb5d72a 249576 openexr-viewers-dbgsym_2.3.0-1_armhf.deb bd21417166e79e60c3afefe1ec4ea735b5c73d2d 7310 openexr-viewers_2.3.0-1_armhf.buildinfo 47fdb74888468e97ee6cfcb14e953acc468a9bfb 109524 openexr-viewers_2.3.0-1_armhf.deb Checksums-Sha256: ee05e2af28168596f33bd3e023b61a4f27870c0eadee0dc87c69ccb5cedb804c 249576 openexr-viewers-dbgsym_2.3.0-1_armhf.deb fcc4c9c7822bdb1d3cf62d2bef201f1e0f238ae60331ac8b1a25462fadd847d2 7310 openexr-viewers_2.3.0-1_armhf.buildinfo 1efccb31b31f4ef9aa2a4399e029fa8186c0355003a3dd99250ad724c04d8273 109524 openexr-viewers_2.3.0-1_armhf.deb Files: 7569cb62f1698f1597de49d550225331 249576 debug optional openexr-viewers-dbgsym_2.3.0-1_armhf.deb 943978354c1b2d30fb544b6b90d99a36 7310 graphics optional openexr-viewers_2.3.0-1_armhf.buildinfo 7a144039b3bcc8e5df9acb9a90b2cde1 109524 graphics optional openexr-viewers_2.3.0-1_armhf.deb Thu Jul 22 08:22:09 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.VJAiUkONzS/openexr-viewers_2.3.0-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.VJAiUkONzS/openexr-viewers_2.3.0-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.VJAiUkONzS/openexr-viewers_2.3.0-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.VJAiUkONzS/b1/openexr-viewers_2.3.0-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.VJAiUkONzS/b2/openexr-viewers_2.3.0-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.239s) 0.239s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.021s) 0.021s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Thu Jul 22 08:22:11 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Thu Jul 22 08:22:11 UTC 2021 I: openexr-viewers from bullseye built successfully and reproducibly on armhf. Thu Jul 22 08:22:12 UTC 2021 I: Submitting .buildinfo files to external archives: Thu Jul 22 08:22:12 UTC 2021 I: Submitting 8.0K b1/openexr-viewers_2.3.0-1_armhf.buildinfo.asc Thu Jul 22 08:22:14 UTC 2021 I: Submitting 12K b2/openexr-viewers_2.3.0-1_armhf.buildinfo.asc Thu Jul 22 08:22:15 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Jul 22 08:22:15 UTC 2021 I: Done submitting .buildinfo files. Thu Jul 22 08:22:15 UTC 2021 I: Removing signed openexr-viewers_2.3.0-1_armhf.buildinfo.asc files: removed './b1/openexr-viewers_2.3.0-1_armhf.buildinfo.asc' removed './b2/openexr-viewers_2.3.0-1_armhf.buildinfo.asc'