Sat Aug 14 16:01:46 UTC 2021 I: starting to build liburi-cpan-perl/bullseye/armhf on jenkins on '2021-08-14 16:01' Sat Aug 14 16:01:46 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_40/185/console.log Sat Aug 14 16:01:46 UTC 2021 I: Downloading source for bullseye/liburi-cpan-perl=1.007-2 --2021-08-14 16:01:46-- http://cdn-fastly.deb.debian.org/debian/pool/main/libu/liburi-cpan-perl/liburi-cpan-perl_1.007-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2431 (2.4K) Saving to: ‘liburi-cpan-perl_1.007-2.dsc’ 0K .. 100% 231M=0s 2021-08-14 16:01:46 (231 MB/s) - ‘liburi-cpan-perl_1.007-2.dsc’ saved [2431/2431] Sat Aug 14 16:01:46 UTC 2021 I: liburi-cpan-perl_1.007-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: liburi-cpan-perl Binary: liburi-cpan-perl Architecture: all Version: 1.007-2 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/URI-cpan Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/liburi-cpan-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/liburi-cpan-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libcpan-distnameinfo-perl , libtest-simple-perl , liburi-perl , perl Package-List: liburi-cpan-perl deb perl optional arch=all Checksums-Sha1: 2c67c2505f292ab8091c2929566cc2a290aaccee 16116 liburi-cpan-perl_1.007.orig.tar.gz 3bc7c5d8848de00d94cf640b143ae942cdc011e6 1640 liburi-cpan-perl_1.007-2.debian.tar.xz Checksums-Sha256: 125a1394662e0a45e2696977496c1d027b14387ff6e39b60c07e0f96eae152d3 16116 liburi-cpan-perl_1.007.orig.tar.gz efaa10893e356b8ab6494788873d29abf0ed2ef2210e504767a6a14a2470920c 1640 liburi-cpan-perl_1.007-2.debian.tar.xz Files: 60aa35b085d2baa5bcd7d6062029fcee 16116 liburi-cpan-perl_1.007.orig.tar.gz 06b1285ea3c8eef9dd1fc59d4423d8ae 1640 liburi-cpan-perl_1.007-2.debian.tar.xz Dgit: dac67580e0a97999b306c23d8df409b1a8bdedd5 debian archive/debian/1.007-2 https://git.dgit.debian.org/liburi-cpan-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAl+QVC5fFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgbvRBAAwxb+mXdxbAW3MYAV6S3DfPlbl3CTj/gh4lzShOv7iVq8/Tpi0a/1By9D 3deS9WMV2cdOTQoPLHf3CJUmtIbq5Kuu9BQJ1fcbJ58s2pgY9aK7W6Kn1En9Nm7M yCtLRsxZWQCyjmn2jbK3W2DogRv4lJUJ6hRvZieMYNiUvjBDXngPAtNINH7eD3mg 9H4EdPAWyL9VrQ7UwZHgugMrO/e7OyumY4JDZfk1px6VJoCVrMTuPU4Rc7lyndTW zCieCKjQxflt+GtQfdzlUW1K3Udv6+UQw4I2MyKUj0O9JLHfEIAH07US4OzK5pGn bX4U6omA61GHs17G8j0d3O8jrpKnP83Xj2KebpphLeqGUVw11+Ksf1XPR+a7iz1s M7uB0N27eoSWFDbvRIeALjbU9n3xkYT4Hx35ooV8UJZPfzvksIjDHjKgYyz+Qll2 vfGUPIvZZvw63DnOqUYRpoGIfdOdvBcwXlzK8+nACxLRVHXMnzmo8Zogrg9FN9yH AAwEy94gR6FfEaOXkwmotC7r7si60vBY+77D2wGScIxRO3sAMYmwznjkQpugTMJI PY7B+4cdwhLhqGZT4uaIA4O/DbwQBq10SWKa7gHFtBnNv5kf4kb0z8Qi0jJxQg4M DODfvAq5N91ntKZLvaRqYzoEvNhy/Li9AJ7B8+/Asu7X95oyiAs= =4x9A -----END PGP SIGNATURE----- Sat Aug 14 16:01:46 UTC 2021 I: Checking whether the package is not for us Sat Aug 14 16:01:46 UTC 2021 I: Starting 1st build on remote node jtx1b-armhf-rb.debian.net. Sat Aug 14 16:01:46 UTC 2021 I: Preparing to do remote build '1' on jtx1b-armhf-rb.debian.net. Sat Aug 14 16:03:19 UTC 2021 I: Deleting $TMPDIR on jtx1b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Aug 14 04:01:53 -12 2021 I: pbuilder-time-stamp: 1628956913 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [liburi-cpan-perl_1.007-2.dsc] I: copying [./liburi-cpan-perl_1.007.orig.tar.gz] I: copying [./liburi-cpan-perl_1.007-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.4EDWAuxZ/trustedkeys.kbx': General error gpgv: Signature made Wed Oct 21 03:30:54 2020 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./liburi-cpan-perl_1.007-2.dsc dpkg-source: info: extracting liburi-cpan-perl in liburi-cpan-perl-1.007 dpkg-source: info: unpacking liburi-cpan-perl_1.007.orig.tar.gz dpkg-source: info: unpacking liburi-cpan-perl_1.007-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/1171/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='98704135d55b47fa9281b7c8ff02ae71' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='1171' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.8bp83rt0fo/pbuilderrc_JZfH --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.8bp83rt0fo/b1 --logfile b1/build.log liburi-cpan-perl_1.007-2.dsc' SUDO_GID='114' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux jtx1b 5.10.0-8-arm64 #1 SMP Debian 5.10.46-4 (2021-08-03) aarch64 GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Aug 4 08:25 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Jul 28 07:09 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Jul 28 07:09 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Jul 28 07:09 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Jul 28 07:09 more -rwsr-xr-x 1 root root 34400 Jul 28 07:09 mount -rwxr-xr-x 1 root root 9824 Jul 28 07:09 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 08:25 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 13 21:35 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Jul 28 07:09 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 21:55 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Jul 28 07:09 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Jul 28 07:09 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/1171/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libcpan-distnameinfo-perl, libtest-simple-perl, liburi-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libcpan-distnameinfo-perl; however: Package libcpan-distnameinfo-perl is not installed. pbuilder-satisfydepends-dummy depends on liburi-perl; however: Package liburi-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcpan-distnameinfo-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} liburi-perl{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 17.8 MB of archives. After unpacking 63.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-8 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf libcpan-distnameinfo-perl all 0.12-2.1 [9060 B] Get: 33 http://deb.debian.org/debian bullseye/main armhf liburi-perl all 5.08-1 [90.6 kB] Fetched 17.8 MB in 5s (3858 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_armhf.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../01-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../03-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../07-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../10-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../23-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../25-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libcpan-distnameinfo-perl. Preparing to unpack .../31-libcpan-distnameinfo-perl_0.12-2.1_all.deb ... Unpacking libcpan-distnameinfo-perl (0.12-2.1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../32-liburi-perl_5.08-1_all.deb ... Unpacking liburi-perl (5.08-1) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libcpan-distnameinfo-perl (0.12-2.1) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libelf1:armhf (0.183-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up liburi-perl (5.08-1) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/liburi-cpan-perl-1.007/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../liburi-cpan-perl_1.007-2_source.changes dpkg-buildpackage: info: source package liburi-cpan-perl dpkg-buildpackage: info: source version 1.007-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/liburi-cpan-perl-1.007=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/build/liburi-cpan-perl-1.007=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for URI::cpan Writing MYMETA.yml and MYMETA.json dh_auto_build make -j3 make[1]: Entering directory '/build/liburi-cpan-perl-1.007' cp lib/URI/cpan/distfile.pm blib/lib/URI/cpan/distfile.pm cp lib/URI/cpan.pm blib/lib/URI/cpan.pm cp lib/URI/cpan/package.pm blib/lib/URI/cpan/package.pm cp lib/URI/cpan/author.pm blib/lib/URI/cpan/author.pm cp lib/URI/cpan/module.pm blib/lib/URI/cpan/module.pm cp lib/URI/cpan/dist.pm blib/lib/URI/cpan/dist.pm Manifying 6 pod documents make[1]: Leaving directory '/build/liburi-cpan-perl-1.007' dh_auto_test make -j3 test TEST_VERBOSE=1 make[1]: Entering directory '/build/liburi-cpan-perl-1.007' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.44 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.44 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.44 # File::Spec any 3.78 # Test::More 0.96 1.302175 # URI any 5.08 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ------------------ ---- ----- # CPAN::DistnameInfo any 0.12 # Carp any 1.50 # URI::_generic any 5.08 # parent any 0.238 # strict any 1.11 # warnings any 1.47 # t/00-report-prereqs.t .. 1..1 ok 1 ok t/uri-cpan.t ........... 1..15 ok 1 - 'distfile with ver' isa 'URI::cpan::distfile' ok 2 - we can extract author ok 3 - we can extract dist_name ok 4 - we can extract dist_version ok 5 - we can extract dist_filepath ok 6 - 'distfile with path and ver' isa 'URI::cpan::distfile' ok 7 - we can extract author ok 8 - we can extract dist_name ok 9 - we can extract dist_version ok 10 - 'distfile with undef ver' isa 'URI::cpan::distfile' ok 11 - we can extract author ok 12 - we can extract dist_name ok 13 - we can extract dist_version ok 14 - 'author url' isa 'URI::cpan::author' ok 15 - we can extract author ok All tests successful. Files=2, Tests=16, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.68 cusr 0.04 csys = 0.78 CPU) Result: PASS make[1]: Leaving directory '/build/liburi-cpan-perl-1.007' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/liburi-cpan-perl-1.007' dh_auto_install make -j3 install DESTDIR=/build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/liburi-cpan-perl-1.007' Manifying 6 pod documents Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/perl5/URI/cpan.pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/perl5/URI/cpan/distfile.pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/perl5/URI/cpan/module.pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/perl5/URI/cpan/package.pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/perl5/URI/cpan/author.pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/perl5/URI/cpan/dist.pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::distfile.3pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::author.3pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan.3pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::package.3pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::dist.3pm Installing /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::module.3pm make[2]: Leaving directory '/build/liburi-cpan-perl-1.007' rm -f -v /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::author.3pm \ /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::dist.3pm \ /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::module.3pm \ /build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::package.3pm removed '/build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::author.3pm' removed '/build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::dist.3pm' removed '/build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::module.3pm' removed '/build/liburi-cpan-perl-1.007/debian/liburi-cpan-perl/usr/share/man/man3/URI::cpan::package.3pm' make[1]: Leaving directory '/build/liburi-cpan-perl-1.007' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'liburi-cpan-perl' in '../liburi-cpan-perl_1.007-2_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../liburi-cpan-perl_1.007-2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/1171 and its subdirectories I: Current time: Sat Aug 14 04:03:11 -12 2021 I: pbuilder-time-stamp: 1628956991 Sat Aug 14 16:03:21 UTC 2021 I: 1st build successful. Starting 2nd build on remote node wbq0-armhf-rb.debian.net. Sat Aug 14 16:03:21 UTC 2021 I: Preparing to do remote build '2' on wbq0-armhf-rb.debian.net. Sat Aug 14 16:06:18 UTC 2021 I: Deleting $TMPDIR on wbq0-armhf-rb.debian.net. Sat Aug 14 16:06:20 UTC 2021 I: liburi-cpan-perl_1.007-2_armhf.changes: Format: 1.8 Date: Wed, 21 Oct 2020 17:28:07 +0200 Source: liburi-cpan-perl Binary: liburi-cpan-perl Architecture: all Version: 1.007-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: liburi-cpan-perl - module providing URLs for CPAN elements Changes: liburi-cpan-perl (1.007-2) unstable; urgency=medium . * Source-only no-change re-upload. Checksums-Sha1: dc626ab100bb8344a6d883eba68ea0ac9ee7652f 7988 liburi-cpan-perl_1.007-2_all.deb c24239ba7df81c937ccc34876dde11e9db8642f1 4572 liburi-cpan-perl_1.007-2_armhf.buildinfo Checksums-Sha256: fa74389de33da590e2304b79906cd4fbf2747f5f0dba7330ed29491599758231 7988 liburi-cpan-perl_1.007-2_all.deb 06f085da966cb47057ff63b9c2821c1bbe1c1542b5fdc1a4c3c852bf4bc27969 4572 liburi-cpan-perl_1.007-2_armhf.buildinfo Files: 338c95ce1035a2dc2197b74bb9a5b2cc 7988 perl optional liburi-cpan-perl_1.007-2_all.deb 8e0b8e1ab0f65cbcec34f117ec0ef27b 4572 perl optional liburi-cpan-perl_1.007-2_armhf.buildinfo Sat Aug 14 16:06:21 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.8bp83rt0fo/liburi-cpan-perl_1.007-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.8bp83rt0fo/liburi-cpan-perl_1.007-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.8bp83rt0fo/liburi-cpan-perl_1.007-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.8bp83rt0fo/b1/liburi-cpan-perl_1.007-2_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.8bp83rt0fo/b2/liburi-cpan-perl_1.007-2_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.281s) 0.281s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.018s) 0.018s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sat Aug 14 16:06:23 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Sat Aug 14 16:06:23 UTC 2021 I: liburi-cpan-perl from bullseye built successfully and reproducibly on armhf. Sat Aug 14 16:06:24 UTC 2021 I: Submitting .buildinfo files to external archives: Sat Aug 14 16:06:24 UTC 2021 I: Submitting 8.0K b1/liburi-cpan-perl_1.007-2_armhf.buildinfo.asc Sat Aug 14 16:06:25 UTC 2021 I: Submitting 8.0K b2/liburi-cpan-perl_1.007-2_armhf.buildinfo.asc Sat Aug 14 16:06:26 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Aug 14 16:06:26 UTC 2021 I: Done submitting .buildinfo files. Sat Aug 14 16:06:27 UTC 2021 I: Removing signed liburi-cpan-perl_1.007-2_armhf.buildinfo.asc files: removed './b1/liburi-cpan-perl_1.007-2_armhf.buildinfo.asc' removed './b2/liburi-cpan-perl_1.007-2_armhf.buildinfo.asc'