Sun Jul 25 11:44:07 UTC 2021 I: starting to build etckeeper/bullseye/armhf on jenkins on '2021-07-25 11:43' Sun Jul 25 11:44:07 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_29/2986/console.log Sun Jul 25 11:44:07 UTC 2021 I: Downloading source for bullseye/etckeeper=1.18.16-1 --2021-07-25 11:44:07-- http://cdn-fastly.deb.debian.org/debian/pool/main/e/etckeeper/etckeeper_1.18.16-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1555 (1.5K) Saving to: ‘etckeeper_1.18.16-1.dsc’ 0K . 100% 145M=0s 2021-07-25 11:44:07 (145 MB/s) - ‘etckeeper_1.18.16-1.dsc’ saved [1555/1555] Sun Jul 25 11:44:07 UTC 2021 I: etckeeper_1.18.16-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: etckeeper Binary: etckeeper Architecture: all Version: 1.18.16-1 Maintainer: Antoine Beaupré Homepage: https://etckeeper.branchable.com/ Standards-Version: 4.4.1 Vcs-Browser: https://salsa.debian.org/debian/etckeeper Vcs-Git: https://salsa.debian.org/debian/etckeeper.git Build-Depends: debhelper-compat (= 12), bats, bzr, dh-python, fakeroot, git, python3:any Package-List: etckeeper deb admin optional arch=all Checksums-Sha1: 613d515662ac0b3d3c817658ec7c452942ca3f69 93638 etckeeper_1.18.16.orig.tar.gz d3668bc3af1041f84789b11bc18bad652890a60a 25076 etckeeper_1.18.16-1.debian.tar.xz Checksums-Sha256: 8f4d56b0ad670f38b47be0b8e6bfbe73a8b947e2f4f3cfc6edded22a26845ef0 93638 etckeeper_1.18.16.orig.tar.gz 51674c88a5bc8268ae528f9f54c007645af9070fe5f5b0277145ec81e60056df 25076 etckeeper_1.18.16-1.debian.tar.xz Files: 3d1636d5b792a8e07d138060fd95cb02 93638 etckeeper_1.18.16.orig.tar.gz 49849b13951d76dcb3c4015090a26511 25076 etckeeper_1.18.16-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQEzBAEBCAAdFiEEexZCBNCWcjsBljWrPqHd3bJh2XsFAmAcb3QACgkQPqHd3bJh 2Xsd/AgAlCh9D6cMvZTnPlVm+4fZeaszvaTJKgLu1seGqBmQAy+pAK3gda7llPsx rlrQm+8oHsBiFnFY0J8nmX2OBLxt9ZsCN2qVFiMxhJRXlLDVc/CKHGfHozaXnyMK m4rBZvUM0kI6jQvMfFoXaNkzLaMRxFrNtp87Km3G6h/OEwzR8UNqocTwq/sE8eNT IP1lTMcmUOfy0x59hXiAJLJEN96Q5KpCGtaXxH3/q/7dxOCtAQMFOtXNcrB0387x U+YfVbNAsvieFjZVR+yNEZnodFShdtV3qXab+bIhapKNdE/hYkYAe7GesR9DMvJi 8bYoJiQ109CxYy785VyF/9+IPsJZ0Q== =Gt18 -----END PGP SIGNATURE----- Sun Jul 25 11:44:07 UTC 2021 I: Checking whether the package is not for us Sun Jul 25 11:44:07 UTC 2021 I: Starting 1st build on remote node virt32a-armhf-rb.debian.net. Sun Jul 25 11:44:07 UTC 2021 I: Preparing to do remote build '1' on virt32a-armhf-rb.debian.net. Sun Jul 25 11:50:35 UTC 2021 I: Deleting $TMPDIR on virt32a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Sat Jul 24 23:44:16 -12 2021 I: pbuilder-time-stamp: 1627213456 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [etckeeper_1.18.16-1.dsc] I: copying [./etckeeper_1.18.16.orig.tar.gz] I: copying [./etckeeper_1.18.16-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.UO0QVPtF/trustedkeys.kbx': General error gpgv: Signature made Thu Feb 4 10:04:36 2021 -12 gpgv: using RSA key 7B164204D096723B019635AB3EA1DDDDB261D97B gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./etckeeper_1.18.16-1.dsc dpkg-source: info: extracting etckeeper in etckeeper-1.18.16 dpkg-source: info: unpacking etckeeper_1.18.16.orig.tar.gz dpkg-source: info: unpacking etckeeper_1.18.16-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Add-breezy-python3-plugin.patch dpkg-source: info: applying 0002-Default-to-UTF8-encoding-for-consistent-ordering.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/5368/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='a3a7946616484ff9a90fef9248290d37' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='5368' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.8x9qhfujcT/pbuilderrc_B8jy --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.8x9qhfujcT/b1 --logfile b1/build.log etckeeper_1.18.16-1.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux virt32a 5.10.0-8-armmp-lpae #1 SMP Debian 5.10.46-2 (2021-07-20) armv7l GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Jun 21 14:26 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Feb 7 02:38 more -rwsr-xr-x 1 root root 34400 Feb 7 02:38 mount -rwxr-xr-x 1 root root 9824 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 14:26 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 21 21:26 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Feb 7 02:38 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 21:55 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Feb 7 02:38 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/5368/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), bats, bzr, dh-python, fakeroot, git, python3:any dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on bats; however: Package bats is not installed. pbuilder-satisfydepends-dummy depends on bzr; however: Package bzr is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on git; however: Package git is not installed. pbuilder-satisfydepends-dummy depends on python3:any. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bats{a} brz{a} bsdextrautils{a} bzr{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} git{a} git-man{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libcurl3-gnutls{a} libdebhelper-perl{a} libelf1{a} liberror-perl{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libldap-2.4-2{a} libmagic-mgc{a} libmagic1{a} libmpdec3{a} libnghttp2-14{a} libpipeline1{a} libpsl5{a} libpython3-stdlib{a} libpython3.9-minimal{a} libpython3.9-stdlib{a} libreadline8{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libsigsegv2{a} libssh2-1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} openssl{a} po-debconf{a} python3{a} python3-breezy{a} python3-certifi{a} python3-configobj{a} python3-distutils{a} python3-dulwich{a} python3-fastimport{a} python3-lib2to3{a} python3-minimal{a} python3-patiencediff{a} python3-six{a} python3-urllib3{a} python3.9{a} python3.9-minimal{a} readline-common{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl less libarchive-cpio-perl libldap-common libltdl-dev libmail-sendmail-perl libsasl2-modules lynx openssh-client parallel publicsuffix python3-github python3-gitlab python3-gpg python3-launchpadlib python3-paramiko wget 0 packages upgraded, 71 newly installed, 0 to remove and 0 not upgraded. Need to get 34.6 MB of archives. After unpacking 128 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-7 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf libpython3.9-minimal armhf 3.9.2-1 [790 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libexpat1 armhf 2.2.10-2 [76.3 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf python3.9-minimal armhf 3.9.2-1 [1630 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf python3-minimal armhf 3.9.2-3 [38.2 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf media-types all 4.0.0 [30.3 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libmpdec3 armhf 2.5.1-1 [74.9 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf readline-common all 8.1-1 [73.7 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf libreadline8 armhf 8.1-1 [147 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf libpython3.9-stdlib armhf 3.9.2-1 [1608 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf python3.9 armhf 3.9.2-1 [466 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf libpython3-stdlib armhf 3.9.2-3 [21.4 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf python3 armhf 3.9.2-3 [37.9 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf openssl armhf 1.1.1k-1 [826 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf ca-certificates all 20210119 [158 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf bats all 1.2.1-3 [30.3 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf python3-six all 1.16.0-1 [17.1 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf python3-configobj all 5.0.6-4 [35.8 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf python3-certifi all 2020.6.20-1 [151 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf python3-urllib3 all 1.26.5-1~exp1 [114 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf python3-dulwich armhf 0.20.15-1 [286 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf python3-fastimport all 0.9.8-5 [30.5 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf python3-patiencediff armhf 0.2.1-1+b1 [19.2 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf python3-breezy armhf 3.1.0-8 [1611 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf brz all 3.1.0-8 [61.5 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf bzr all 2.7.0+bzr6622+brz [21.1 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 46 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 47 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 48 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 49 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 50 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 51 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 52 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 53 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 54 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 55 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 56 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 57 http://deb.debian.org/debian bullseye/main armhf python3-lib2to3 all 3.9.2-1 [77.8 kB] Get: 58 http://deb.debian.org/debian bullseye/main armhf python3-distutils all 3.9.2-1 [143 kB] Get: 59 http://deb.debian.org/debian bullseye/main armhf dh-python all 4.20201102+nmu1 [99.4 kB] Get: 60 http://deb.debian.org/debian bullseye/main armhf libbrotli1 armhf 1.0.9-2+b2 [262 kB] Get: 61 http://deb.debian.org/debian bullseye/main armhf libsasl2-modules-db armhf 2.1.27+dfsg-2.1 [67.6 kB] Get: 62 http://deb.debian.org/debian bullseye/main armhf libsasl2-2 armhf 2.1.27+dfsg-2.1 [99.1 kB] Get: 63 http://deb.debian.org/debian bullseye/main armhf libldap-2.4-2 armhf 2.4.57+dfsg-3 [210 kB] Get: 64 http://deb.debian.org/debian bullseye/main armhf libnghttp2-14 armhf 1.43.0-1 [65.6 kB] Get: 65 http://deb.debian.org/debian bullseye/main armhf libpsl5 armhf 0.21.0-1.2 [56.1 kB] Get: 66 http://deb.debian.org/debian bullseye/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2+b2 [55.2 kB] Get: 67 http://deb.debian.org/debian bullseye/main armhf libssh2-1 armhf 1.9.0-2 [143 kB] Get: 68 http://deb.debian.org/debian bullseye/main armhf libcurl3-gnutls armhf 7.74.0-1.3+b1 [306 kB] Get: 69 http://deb.debian.org/debian bullseye/main armhf liberror-perl all 0.17029-1 [31.0 kB] Get: 70 http://deb.debian.org/debian bullseye/main armhf git-man all 1:2.30.2-1 [1827 kB] Get: 71 http://deb.debian.org/debian bullseye/main armhf git armhf 1:2.30.2-1 [5128 kB] Fetched 34.6 MB in 5s (6984 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../0-bsdextrautils_2.36.1-7_armhf.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../1-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../2-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../3-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../4-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package libpython3.9-minimal:armhf. Preparing to unpack .../5-libpython3.9-minimal_3.9.2-1_armhf.deb ... Unpacking libpython3.9-minimal:armhf (3.9.2-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../6-libexpat1_2.2.10-2_armhf.deb ... Unpacking libexpat1:armhf (2.2.10-2) ... Selecting previously unselected package python3.9-minimal. Preparing to unpack .../7-python3.9-minimal_3.9.2-1_armhf.deb ... Unpacking python3.9-minimal (3.9.2-1) ... Setting up libpython3.9-minimal:armhf (3.9.2-1) ... Setting up libexpat1:armhf (2.2.10-2) ... Setting up python3.9-minimal (3.9.2-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20265 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.9.2-3_armhf.deb ... Unpacking python3-minimal (3.9.2-3) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_4.0.0_all.deb ... Unpacking media-types (4.0.0) ... Selecting previously unselected package libmpdec3:armhf. Preparing to unpack .../2-libmpdec3_2.5.1-1_armhf.deb ... Unpacking libmpdec3:armhf (2.5.1-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) ... Selecting previously unselected package libreadline8:armhf. Preparing to unpack .../4-libreadline8_8.1-1_armhf.deb ... Unpacking libreadline8:armhf (8.1-1) ... Selecting previously unselected package libpython3.9-stdlib:armhf. Preparing to unpack .../5-libpython3.9-stdlib_3.9.2-1_armhf.deb ... Unpacking libpython3.9-stdlib:armhf (3.9.2-1) ... Selecting previously unselected package python3.9. Preparing to unpack .../6-python3.9_3.9.2-1_armhf.deb ... Unpacking python3.9 (3.9.2-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.9.2-3_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.9.2-3) ... Setting up python3-minimal (3.9.2-3) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20686 files and directories currently installed.) Preparing to unpack .../00-python3_3.9.2-3_armhf.deb ... Unpacking python3 (3.9.2-3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package openssl. Preparing to unpack .../02-openssl_1.1.1k-1_armhf.deb ... Unpacking openssl (1.1.1k-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../03-ca-certificates_20210119_all.deb ... Unpacking ca-certificates (20210119) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../05-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../08-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../09-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../10-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../11-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../12-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../13-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package bats. Preparing to unpack .../14-bats_1.2.1-3_all.deb ... Unpacking bats (1.2.1-3) ... Selecting previously unselected package python3-six. Preparing to unpack .../15-python3-six_1.16.0-1_all.deb ... Unpacking python3-six (1.16.0-1) ... Selecting previously unselected package python3-configobj. Preparing to unpack .../16-python3-configobj_5.0.6-4_all.deb ... Unpacking python3-configobj (5.0.6-4) ... Selecting previously unselected package python3-certifi. Preparing to unpack .../17-python3-certifi_2020.6.20-1_all.deb ... Unpacking python3-certifi (2020.6.20-1) ... Selecting previously unselected package python3-urllib3. Preparing to unpack .../18-python3-urllib3_1.26.5-1~exp1_all.deb ... Unpacking python3-urllib3 (1.26.5-1~exp1) ... Selecting previously unselected package python3-dulwich. Preparing to unpack .../19-python3-dulwich_0.20.15-1_armhf.deb ... Unpacking python3-dulwich (0.20.15-1) ... Selecting previously unselected package python3-fastimport. Preparing to unpack .../20-python3-fastimport_0.9.8-5_all.deb ... Unpacking python3-fastimport (0.9.8-5) ... Selecting previously unselected package python3-patiencediff. Preparing to unpack .../21-python3-patiencediff_0.2.1-1+b1_armhf.deb ... Unpacking python3-patiencediff (0.2.1-1+b1) ... Selecting previously unselected package python3-breezy. Preparing to unpack .../22-python3-breezy_3.1.0-8_armhf.deb ... Unpacking python3-breezy (3.1.0-8) ... Selecting previously unselected package brz. Preparing to unpack .../23-brz_3.1.0-8_all.deb ... Unpacking brz (3.1.0-8) ... Selecting previously unselected package bzr. Preparing to unpack .../24-bzr_2.7.0+bzr6622+brz_all.deb ... Unpacking bzr (2.7.0+bzr6622+brz) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../25-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../26-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../27-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../28-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../29-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../30-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../31-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../32-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../33-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../34-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../35-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../36-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../37-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../38-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../39-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../40-python3-lib2to3_3.9.2-1_all.deb ... Unpacking python3-lib2to3 (3.9.2-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../41-python3-distutils_3.9.2-1_all.deb ... Unpacking python3-distutils (3.9.2-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../42-dh-python_4.20201102+nmu1_all.deb ... Unpacking dh-python (4.20201102+nmu1) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../43-libbrotli1_1.0.9-2+b2_armhf.deb ... Unpacking libbrotli1:armhf (1.0.9-2+b2) ... Selecting previously unselected package libsasl2-modules-db:armhf. Preparing to unpack .../44-libsasl2-modules-db_2.1.27+dfsg-2.1_armhf.deb ... Unpacking libsasl2-modules-db:armhf (2.1.27+dfsg-2.1) ... Selecting previously unselected package libsasl2-2:armhf. Preparing to unpack .../45-libsasl2-2_2.1.27+dfsg-2.1_armhf.deb ... Unpacking libsasl2-2:armhf (2.1.27+dfsg-2.1) ... Selecting previously unselected package libldap-2.4-2:armhf. Preparing to unpack .../46-libldap-2.4-2_2.4.57+dfsg-3_armhf.deb ... Unpacking libldap-2.4-2:armhf (2.4.57+dfsg-3) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../47-libnghttp2-14_1.43.0-1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.43.0-1) ... Selecting previously unselected package libpsl5:armhf. Preparing to unpack .../48-libpsl5_0.21.0-1.2_armhf.deb ... Unpacking libpsl5:armhf (0.21.0-1.2) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../49-librtmp1_2.4+20151223.gitfa8646d.1-2+b2_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b2) ... Selecting previously unselected package libssh2-1:armhf. Preparing to unpack .../50-libssh2-1_1.9.0-2_armhf.deb ... Unpacking libssh2-1:armhf (1.9.0-2) ... Selecting previously unselected package libcurl3-gnutls:armhf. Preparing to unpack .../51-libcurl3-gnutls_7.74.0-1.3+b1_armhf.deb ... Unpacking libcurl3-gnutls:armhf (7.74.0-1.3+b1) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../52-liberror-perl_0.17029-1_all.deb ... Unpacking liberror-perl (0.17029-1) ... Selecting previously unselected package git-man. Preparing to unpack .../53-git-man_1%3a2.30.2-1_all.deb ... Unpacking git-man (1:2.30.2-1) ... Selecting previously unselected package git. Preparing to unpack .../54-git_1%3a2.30.2-1_armhf.deb ... Unpacking git (1:2.30.2-1) ... Setting up media-types (4.0.0) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up libpsl5:armhf (0.21.0-1.2) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libbrotli1:armhf (1.0.9-2+b2) ... Setting up libnghttp2-14:armhf (1.43.0-1) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up libsasl2-modules-db:armhf (2.1.27+dfsg-2.1) ... Setting up liberror-perl (0.17029-1) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b2) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libsasl2-2:armhf (2.1.27+dfsg-2.1) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libmpdec3:armhf (2.5.1-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up git-man (1:2.30.2-1) ... Setting up libssh2-1:armhf (1.9.0-2) ... Setting up bats (1.2.1-3) ... Setting up openssl (1.1.1k-1) ... Setting up libelf1:armhf (0.183-1) ... Setting up readline-common (8.1-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libreadline8:armhf (8.1-1) ... Setting up libldap-2.4-2:armhf (2.4.57+dfsg-3) ... Setting up m4 (1.4.18-5) ... Setting up libcurl3-gnutls:armhf (7.74.0-1.3+b1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 129 added, 0 removed; done. Setting up git (1:2.30.2-1) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up libpython3.9-stdlib:armhf (3.9.2-1) ... Setting up libpython3-stdlib:armhf (3.9.2-3) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up python3.9 (3.9.2-1) ... Setting up debhelper (13.3.4) ... Setting up python3 (3.9.2-3) ... Setting up python3-six (1.16.0-1) ... Setting up python3-configobj (5.0.6-4) ... Setting up python3-certifi (2020.6.20-1) ... Setting up python3-urllib3 (1.26.5-1~exp1) ... Setting up python3-patiencediff (0.2.1-1+b1) ... Setting up python3-dulwich (0.20.15-1) ... Setting up python3-lib2to3 (3.9.2-1) ... Setting up python3-distutils (3.9.2-1) ... Setting up dh-python (4.20201102+nmu1) ... Setting up python3-fastimport (0.9.8-5) ... Setting up python3-breezy (3.1.0-8) ... Setting up brz (3.1.0-8) ... update-alternatives: using /usr/bin/brz to provide /usr/bin/bzr (bzr) in auto mode Setting up bzr (2.7.0+bzr6622+brz) ... Processing triggers for libc-bin (2.31-13) ... Processing triggers for ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/etckeeper-1.18.16/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../etckeeper_1.18.16-1_source.changes dpkg-buildpackage: info: source package etckeeper dpkg-buildpackage: info: source version 1.18.16-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Antoine Beaupré dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean --with python3 dh_auto_clean make -j3 clean make[1]: Entering directory '/build/etckeeper-1.18.16' sed -i~ "s/Version:.*/Version: $(perl -e '$_=<>;m/\((.*?)(-.*)?\)/;print $1;';m/\((.*?)(-.*)?\)/;print $1;' ;m/\((.*?)(-.*)?\)/;print $1;';m/\((.*?)(-.*)?\)/;print $1;' build/lib/breezy/plugins/etckeeper python ./etckeeper-dnf/etckeeper.py build || echo "** DNF support not built" /bin/sh: 1: python: not found ** DNF support not built make[1]: Leaving directory '/build/etckeeper-1.18.16' dh_auto_test make -j3 test make[1]: Entering directory '/build/etckeeper-1.18.16' mkdir /tmp/tmp.W5ZuMkx1JN testdir=/tmp/tmp.W5ZuMkx1JN fakeroot ./test-etckeeper 1..10 ok 1 test: etckeeper init ok 2 test: etckeeper commit ok 3 test: etckeeper commit empty dir ok 4 test: etckeeper commit not empty dir ok 5 test: etckeeper commit non-default mode ok 6 root_test: check if root ok 7 root_test: create file owned by root:root ok 8 root_test: create file owned by bin:daemon ok 9 test: etckeeper debug (git) # skip ok 10 test: etckeeper uninit -f rm -rf /tmp/tmp.W5ZuMkx1JN make[1]: Leaving directory '/build/etckeeper-1.18.16' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/etckeeper-1.18.16' dh_auto_install make -j3 install DESTDIR=/build/etckeeper-1.18.16/debian/etckeeper AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true" make[2]: Entering directory '/build/etckeeper-1.18.16' sed -i~ "s/Version:.*/Version: $(perl -e '$_=<>;m/\((.*?)(-.*)?\)/;print $1;' /build/etckeeper-1.18.16/debian/etckeeper/usr/lib/python3/dist-packages/breezy/plugins/etckeeper byte-compiling /build/etckeeper-1.18.16/debian/etckeeper/usr/lib/python3/dist-packages/breezy/plugins/etckeeper/__init__.py to __init__.cpython-39.pyc running install_egg_info Writing /build/etckeeper-1.18.16/debian/etckeeper/usr/lib/python3/dist-packages/brz_etckeeper-0.0.0.egg-info echo "** installation successful" ** installation successful make[2]: Leaving directory '/build/etckeeper-1.18.16' find debian/etckeeper -name '__pycache__' -print0 | xargs -0 -r rm -rv removed 'debian/etckeeper/usr/lib/python3/dist-packages/breezy/plugins/etckeeper/__pycache__/__init__.cpython-39.pyc' removed directory 'debian/etckeeper/usr/lib/python3/dist-packages/breezy/plugins/etckeeper/__pycache__' make[1]: Leaving directory '/build/etckeeper-1.18.16' debian/rules override_dh_installdocs make[1]: Entering directory '/build/etckeeper-1.18.16' dh_installdocs -X.gitignore make[1]: Leaving directory '/build/etckeeper-1.18.16' dh_installchangelogs dh_installman dh_installcron dh_installdebconf dh_python3 dh_installsystemd dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'etckeeper' in '../etckeeper_1.18.16-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../etckeeper_1.18.16-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/5368 and its subdirectories I: Current time: Sat Jul 24 23:50:30 -12 2021 I: pbuilder-time-stamp: 1627213830 Sun Jul 25 11:50:37 UTC 2021 I: 1st build successful. Starting 2nd build on remote node virt64a-armhf-rb.debian.net. Sun Jul 25 11:50:37 UTC 2021 I: Preparing to do remote build '2' on virt64a-armhf-rb.debian.net. Sun Jul 25 11:55:06 UTC 2021 I: Deleting $TMPDIR on virt64a-armhf-rb.debian.net. Sun Jul 25 11:55:09 UTC 2021 I: etckeeper_1.18.16-1_armhf.changes: Format: 1.8 Date: Thu, 04 Feb 2021 16:52:14 -0500 Source: etckeeper Binary: etckeeper Architecture: all Version: 1.18.16-1 Distribution: unstable Urgency: medium Maintainer: Antoine Beaupré Changed-By: Antoine Beaupré Description: etckeeper - store /etc in git, mercurial, brz or darcs Changes: etckeeper (1.18.16-1) unstable; urgency=medium . * new upstream release * move Debian package hosting to salsa Checksums-Sha1: 92fa9d8e51380dbf3e14c9198b642f2dd112991b 54352 etckeeper_1.18.16-1_all.deb f8be9440596342aba516f352a61f7cc6f01805de 5977 etckeeper_1.18.16-1_armhf.buildinfo Checksums-Sha256: bad40b3aae96e29b9b9dde9e7455c4bc5b9e4a60cfcf1324794b3dca2c5247fe 54352 etckeeper_1.18.16-1_all.deb 43ce9027f25516a96c196ffae582d138d73b6a94d1f7d1579ecac7266ef171ea 5977 etckeeper_1.18.16-1_armhf.buildinfo Files: 1a76826f5f7d9767e566e7c6f7f1416b 54352 admin optional etckeeper_1.18.16-1_all.deb 611f1fa3bc676b19e37baf3ba1ffbee6 5977 admin optional etckeeper_1.18.16-1_armhf.buildinfo Sun Jul 25 11:55:10 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.8x9qhfujcT/etckeeper_1.18.16-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.8x9qhfujcT/etckeeper_1.18.16-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.8x9qhfujcT/etckeeper_1.18.16-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.8x9qhfujcT/b1/etckeeper_1.18.16-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.8x9qhfujcT/b2/etckeeper_1.18.16-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.317s) 0.317s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.018s) 0.018s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sun Jul 25 11:55:15 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Sun Jul 25 11:55:15 UTC 2021 I: etckeeper from bullseye built successfully and reproducibly on armhf. Sun Jul 25 11:55:20 UTC 2021 I: Submitting .buildinfo files to external archives: Sun Jul 25 11:55:20 UTC 2021 I: Submitting 8.0K b1/etckeeper_1.18.16-1_armhf.buildinfo.asc Sun Jul 25 11:55:20 UTC 2021 I: Submitting 8.0K b2/etckeeper_1.18.16-1_armhf.buildinfo.asc Sun Jul 25 11:55:21 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sun Jul 25 11:55:21 UTC 2021 I: Done submitting .buildinfo files. Sun Jul 25 11:55:21 UTC 2021 I: Removing signed etckeeper_1.18.16-1_armhf.buildinfo.asc files: removed './b1/etckeeper_1.18.16-1_armhf.buildinfo.asc' removed './b2/etckeeper_1.18.16-1_armhf.buildinfo.asc'