Tue Sep 7 04:39:02 UTC 2021 I: starting to build ansilove/bullseye/armhf on jenkins on '2021-09-07 04:38' Tue Sep 7 04:39:02 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_13/2599/console.log Tue Sep 7 04:39:02 UTC 2021 I: Downloading source for bullseye/ansilove=4.1.4-1 --2021-09-07 04:39:02-- http://cdn-fastly.deb.debian.org/debian/pool/main/a/ansilove/ansilove_4.1.4-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1863 (1.8K) Saving to: ‘ansilove_4.1.4-1.dsc’ 0K . 100% 121M=0s 2021-09-07 04:39:02 (121 MB/s) - ‘ansilove_4.1.4-1.dsc’ saved [1863/1863] Tue Sep 7 04:39:02 UTC 2021 I: ansilove_4.1.4-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: ansilove Binary: ansilove Architecture: any Version: 4.1.4-1 Maintainer: Gürkan Myczko Homepage: https://www.ansilove.org Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/myczko-guest/ansilove Vcs-Git: https://salsa.debian.org/myczko-guest/ansilove.git Build-Depends: debhelper-compat (= 13), libbsd-dev, libansilove-dev, cmake Package-List: ansilove deb graphics optional arch=any Checksums-Sha1: a09840f81e109f672fea9f06c7aedf2b4ff061e7 41278 ansilove_4.1.4.orig.tar.gz cde517394bccedd9a72ed7d283da5d0de2f41802 3416 ansilove_4.1.4-1.debian.tar.xz Checksums-Sha256: e072efb0a79df060941520677192366c8635b113fe2d38860b261aee990467d3 41278 ansilove_4.1.4.orig.tar.gz 31e64d802adcdb8fefa925c443f31b146a04a62fb4664a95a61bfae794f6e591 3416 ansilove_4.1.4-1.debian.tar.xz Files: d49ffc12179a3dd88d9d57528ca24169 41278 ansilove_4.1.4.orig.tar.gz 725d5badc26a376d3301bca7487333a0 3416 ansilove_4.1.4-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEkjZVexcMh/iCHArDweDZLphvfH4FAl++NU0ACgkQweDZLphv fH43CxAAtOzwEXLjRI35j9C+YNr541na8KNUZ6G/QmTjrKuyvhgJ7bDe3CLriP7X xpjbPsjNt4FLV663ShvM23q89DZ1+HtLWHQ/cBr6epCT5ePNDBENaHA6zOYWd9sq gkm4GFdxN1qh6GgVwuOMLnGgBGznWcGj/DESLmH4RO2iDvcoRB5kKVpWW6Z5dFqz hVeI5lt4K7YtE1HpFWPdiRnTT8CzvGCK1ffuLt8C6b96X/Eq/JMG7uOT3SErTyKP iuMeEp+qRjp8BpyPCej0W6XywXR6aQf8J8yWWc30TezVL1exnR3rJUDptiUa0lej dihoAcysLtuSVOlSXzaZoAdlUJihFi/OPh+T5qFPhQ6pJ8oGh437IuVPmkc6fomG Lm98/itySSUZQWrNW4lLBqBj/YxeB5VfKa0Bp+OwK2vebVcLnsqGt8xBcOdWs7aB 3ky24VmX63OnFcu/Xfb8mBFo7RzSTpNEXqDDiKYQCutsCOrK3aMUAxglOvFAa8yq RaN4X95ncBJ5Ui8YPQEXvEkweGe4Z1hmqUvXty/kIWvqvrrYM8UfvmqC/FRDRevn XSRAK5ddDmiJVGTP4X99TzBGR6UxxzHYt4RewfUlJPg39vzUgujOQPZUvEFPIuVI DU9H2zPcpaSevFtAYMHmOi4aVfkDsYmyi0L4tfx3bfBNG0zAKv0= =v52D -----END PGP SIGNATURE----- Tue Sep 7 04:39:02 UTC 2021 I: Checking whether the package is not for us Tue Sep 7 04:39:02 UTC 2021 I: Starting 1st build on remote node ff64a-armhf-rb.debian.net. Tue Sep 7 04:39:02 UTC 2021 I: Preparing to do remote build '1' on ff64a-armhf-rb.debian.net. Tue Sep 7 04:41:25 UTC 2021 I: Deleting $TMPDIR on ff64a-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Sep 6 16:39:11 -12 2021 I: pbuilder-time-stamp: 1630989551 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [ansilove_4.1.4-1.dsc] I: copying [./ansilove_4.1.4.orig.tar.gz] I: copying [./ansilove_4.1.4-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.UFEsdIna/trustedkeys.kbx': General error gpgv: Signature made Tue Nov 24 22:43:25 2020 -12 gpgv: using RSA key 9236557B170C87F8821C0AC3C1E0D92E986F7C7E gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./ansilove_4.1.4-1.dsc dpkg-source: info: extracting ansilove in ansilove-4.1.4 dpkg-source: info: unpacking ansilove_4.1.4.orig.tar.gz dpkg-source: info: unpacking ansilove_4.1.4-1.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/19904/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=5' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='be14de1dbc4d4e51a933ff7b90c52b69' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='19904' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.uNSRXXdDRq/pbuilderrc_FtgD --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.uNSRXXdDRq/b1 --logfile b1/build.log ansilove_4.1.4-1.dsc' SUDO_GID='114' SUDO_UID='109' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux ff64a 5.10.0-8-arm64 #1 SMP Debian 5.10.46-4 (2021-08-03) aarch64 GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Aug 4 08:25 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Jul 28 07:09 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Jul 28 07:09 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 2021 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Jul 28 07:09 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Jul 28 07:09 more -rwsr-xr-x 1 root root 34400 Jul 28 07:09 mount -rwxr-xr-x 1 root root 9824 Jul 28 07:09 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 08:25 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 20 21:28 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Jul 28 07:09 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 2021 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 22108 Jul 28 07:09 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Jul 28 07:09 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/19904/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libbsd-dev, libansilove-dev, cmake dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libbsd-dev; however: Package libbsd-dev is not installed. pbuilder-satisfydepends-dummy depends on libansilove-dev; however: Package libansilove-dev is not installed. pbuilder-satisfydepends-dummy depends on cmake; however: Package cmake is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cmake{a} cmake-data{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} fontconfig-config{a} fonts-dejavu-core{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libansilove-dev{a} libansilove1{a} libarchive-zip-perl{a} libarchive13{a} libbrotli1{a} libbsd-dev{a} libbsd0{a} libcurl4{a} libdebhelper-perl{a} libdeflate0{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libfontconfig1{a} libfreetype6{a} libgd3{a} libicu67{a} libjbig0{a} libjpeg62-turbo{a} libjsoncpp24{a} libldap-2.4-2{a} libmagic-mgc{a} libmagic1{a} libmd-dev{a} libmd0{a} libncurses6{a} libnghttp2-14{a} libpipeline1{a} libpng16-16{a} libprocps8{a} libpsl5{a} librhash0{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libsigsegv2{a} libssh2-1{a} libsub-override-perl{a} libtiff5{a} libtool{a} libuchardet0{a} libuv1{a} libwebp6{a} libx11-6{a} libx11-data{a} libxau6{a} libxcb1{a} libxdmcp6{a} libxml2{a} libxpm4{a} m4{a} man-db{a} po-debconf{a} procps{a} sensible-utils{a} ucf{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl libarchive-cpio-perl libgpm2 libldap-common libltdl-dev libmail-sendmail-perl libsasl2-modules lynx psmisc publicsuffix wget 0 packages upgraded, 74 newly installed, 0 to remove and 0 not upgraded. Need to get 30.5 MB of archives. After unpacking 103 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-8 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf libncurses6 armhf 6.2+20201114-2 [80.5 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libprocps8 armhf 2:3.3.17-5 [60.7 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf procps armhf 2:3.3.17-5 [492 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf ucf all 3.0043 [74.0 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf cmake-data all 3.18.4-2 [1725 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf libarchive13 armhf 3.4.3-2+b1 [304 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf libbrotli1 armhf 1.0.9-2+b2 [262 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf libsasl2-modules-db armhf 2.1.27+dfsg-2.1 [67.6 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf libsasl2-2 armhf 2.1.27+dfsg-2.1 [99.1 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf libldap-2.4-2 armhf 2.4.57+dfsg-3 [210 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf libnghttp2-14 armhf 1.43.0-1 [65.6 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf libpsl5 armhf 0.21.0-1.2 [56.1 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2+b2 [55.2 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf libssh2-1 armhf 1.9.0-2 [143 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf libcurl4 armhf 7.74.0-1.3+b1 [310 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libexpat1 armhf 2.2.10-2 [76.3 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf libjsoncpp24 armhf 1.9.4-4 [68.5 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf librhash0 armhf 1.4.1-2 [144 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf libuv1 armhf 1.40.0-2 [120 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf cmake armhf 3.18.4-2 [3534 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 46 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 47 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 48 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 49 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 50 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 51 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 52 http://deb.debian.org/debian bullseye/main armhf fonts-dejavu-core all 2.37-2 [1069 kB] Get: 53 http://deb.debian.org/debian bullseye/main armhf fontconfig-config all 2.13.1-4.2 [281 kB] Get: 54 http://deb.debian.org/debian bullseye/main armhf libpng16-16 armhf 1.6.37-3 [277 kB] Get: 55 http://deb.debian.org/debian bullseye/main armhf libfreetype6 armhf 2.10.4+dfsg-1 [357 kB] Get: 56 http://deb.debian.org/debian bullseye/main armhf libfontconfig1 armhf 2.13.1-4.2 [329 kB] Get: 57 http://deb.debian.org/debian bullseye/main armhf libjpeg62-turbo armhf 1:2.0.6-4 [123 kB] Get: 58 http://deb.debian.org/debian bullseye/main armhf libdeflate0 armhf 1.7-1 [43.1 kB] Get: 59 http://deb.debian.org/debian bullseye/main armhf libjbig0 armhf 2.1-3.1+b2 [28.4 kB] Get: 60 http://deb.debian.org/debian bullseye/main armhf libwebp6 armhf 0.6.1-2.1 [226 kB] Get: 61 http://deb.debian.org/debian bullseye/main armhf libtiff5 armhf 4.2.0-1 [271 kB] Get: 62 http://deb.debian.org/debian bullseye/main armhf libxau6 armhf 1:1.0.9-1 [19.0 kB] Get: 63 http://deb.debian.org/debian bullseye/main armhf libmd0 armhf 1.0.3-3 [27.4 kB] Get: 64 http://deb.debian.org/debian bullseye/main armhf libbsd0 armhf 0.11.3-1 [103 kB] Get: 65 http://deb.debian.org/debian bullseye/main armhf libxdmcp6 armhf 1:1.1.2-3 [24.9 kB] Get: 66 http://deb.debian.org/debian bullseye/main armhf libxcb1 armhf 1.14-3 [136 kB] Get: 67 http://deb.debian.org/debian bullseye/main armhf libx11-data all 2:1.7.2-1 [311 kB] Get: 68 http://deb.debian.org/debian bullseye/main armhf libx11-6 armhf 2:1.7.2-1 [713 kB] Get: 69 http://deb.debian.org/debian bullseye/main armhf libxpm4 armhf 1:3.5.12-1 [44.0 kB] Get: 70 http://deb.debian.org/debian bullseye/main armhf libgd3 armhf 2.3.0-2 [119 kB] Get: 71 http://deb.debian.org/debian bullseye/main armhf libansilove1 armhf 1.2.8-1 [24.9 kB] Get: 72 http://deb.debian.org/debian bullseye/main armhf libansilove-dev armhf 1.2.8-1 [18.1 kB] Get: 73 http://deb.debian.org/debian bullseye/main armhf libmd-dev armhf 1.0.3-3 [45.7 kB] Get: 74 http://deb.debian.org/debian bullseye/main armhf libbsd-dev armhf 0.11.3-1 [229 kB] Fetched 30.5 MB in 6s (4812 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_armhf.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../01-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../03-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../05-libncurses6_6.2+20201114-2_armhf.deb ... Unpacking libncurses6:armhf (6.2+20201114-2) ... Selecting previously unselected package libprocps8:armhf. Preparing to unpack .../06-libprocps8_2%3a3.3.17-5_armhf.deb ... Unpacking libprocps8:armhf (2:3.3.17-5) ... Selecting previously unselected package procps. Preparing to unpack .../07-procps_2%3a3.3.17-5_armhf.deb ... Unpacking procps (2:3.3.17-5) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../08-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../09-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../10-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../11-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../12-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package ucf. Preparing to unpack .../13-ucf_3.0043_all.deb ... Moving old data out of the way Unpacking ucf (3.0043) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../14-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../15-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../16-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../17-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../18-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../19-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package cmake-data. Preparing to unpack .../20-cmake-data_3.18.4-2_all.deb ... Unpacking cmake-data (3.18.4-2) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../21-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../22-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package libarchive13:armhf. Preparing to unpack .../23-libarchive13_3.4.3-2+b1_armhf.deb ... Unpacking libarchive13:armhf (3.4.3-2+b1) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../24-libbrotli1_1.0.9-2+b2_armhf.deb ... Unpacking libbrotli1:armhf (1.0.9-2+b2) ... Selecting previously unselected package libsasl2-modules-db:armhf. Preparing to unpack .../25-libsasl2-modules-db_2.1.27+dfsg-2.1_armhf.deb ... Unpacking libsasl2-modules-db:armhf (2.1.27+dfsg-2.1) ... Selecting previously unselected package libsasl2-2:armhf. Preparing to unpack .../26-libsasl2-2_2.1.27+dfsg-2.1_armhf.deb ... Unpacking libsasl2-2:armhf (2.1.27+dfsg-2.1) ... Selecting previously unselected package libldap-2.4-2:armhf. Preparing to unpack .../27-libldap-2.4-2_2.4.57+dfsg-3_armhf.deb ... Unpacking libldap-2.4-2:armhf (2.4.57+dfsg-3) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../28-libnghttp2-14_1.43.0-1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.43.0-1) ... Selecting previously unselected package libpsl5:armhf. Preparing to unpack .../29-libpsl5_0.21.0-1.2_armhf.deb ... Unpacking libpsl5:armhf (0.21.0-1.2) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../30-librtmp1_2.4+20151223.gitfa8646d.1-2+b2_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b2) ... Selecting previously unselected package libssh2-1:armhf. Preparing to unpack .../31-libssh2-1_1.9.0-2_armhf.deb ... Unpacking libssh2-1:armhf (1.9.0-2) ... Selecting previously unselected package libcurl4:armhf. Preparing to unpack .../32-libcurl4_7.74.0-1.3+b1_armhf.deb ... Unpacking libcurl4:armhf (7.74.0-1.3+b1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../33-libexpat1_2.2.10-2_armhf.deb ... Unpacking libexpat1:armhf (2.2.10-2) ... Selecting previously unselected package libjsoncpp24:armhf. Preparing to unpack .../34-libjsoncpp24_1.9.4-4_armhf.deb ... Unpacking libjsoncpp24:armhf (1.9.4-4) ... Selecting previously unselected package librhash0:armhf. Preparing to unpack .../35-librhash0_1.4.1-2_armhf.deb ... Unpacking librhash0:armhf (1.4.1-2) ... Selecting previously unselected package libuv1:armhf. Preparing to unpack .../36-libuv1_1.40.0-2_armhf.deb ... Unpacking libuv1:armhf (1.40.0-2) ... Selecting previously unselected package cmake. Preparing to unpack .../37-cmake_3.18.4-2_armhf.deb ... Unpacking cmake (3.18.4-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../38-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../39-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../40-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../41-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../42-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../43-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../44-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../45-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../46-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package gettext. Preparing to unpack .../47-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../48-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../49-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../50-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package fonts-dejavu-core. Preparing to unpack .../51-fonts-dejavu-core_2.37-2_all.deb ... Unpacking fonts-dejavu-core (2.37-2) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../52-fontconfig-config_2.13.1-4.2_all.deb ... Unpacking fontconfig-config (2.13.1-4.2) ... Selecting previously unselected package libpng16-16:armhf. Preparing to unpack .../53-libpng16-16_1.6.37-3_armhf.deb ... Unpacking libpng16-16:armhf (1.6.37-3) ... Selecting previously unselected package libfreetype6:armhf. Preparing to unpack .../54-libfreetype6_2.10.4+dfsg-1_armhf.deb ... Unpacking libfreetype6:armhf (2.10.4+dfsg-1) ... Selecting previously unselected package libfontconfig1:armhf. Preparing to unpack .../55-libfontconfig1_2.13.1-4.2_armhf.deb ... Unpacking libfontconfig1:armhf (2.13.1-4.2) ... Selecting previously unselected package libjpeg62-turbo:armhf. Preparing to unpack .../56-libjpeg62-turbo_1%3a2.0.6-4_armhf.deb ... Unpacking libjpeg62-turbo:armhf (1:2.0.6-4) ... Selecting previously unselected package libdeflate0:armhf. Preparing to unpack .../57-libdeflate0_1.7-1_armhf.deb ... Unpacking libdeflate0:armhf (1.7-1) ... Selecting previously unselected package libjbig0:armhf. Preparing to unpack .../58-libjbig0_2.1-3.1+b2_armhf.deb ... Unpacking libjbig0:armhf (2.1-3.1+b2) ... Selecting previously unselected package libwebp6:armhf. Preparing to unpack .../59-libwebp6_0.6.1-2.1_armhf.deb ... Unpacking libwebp6:armhf (0.6.1-2.1) ... Selecting previously unselected package libtiff5:armhf. Preparing to unpack .../60-libtiff5_4.2.0-1_armhf.deb ... Unpacking libtiff5:armhf (4.2.0-1) ... Selecting previously unselected package libxau6:armhf. Preparing to unpack .../61-libxau6_1%3a1.0.9-1_armhf.deb ... Unpacking libxau6:armhf (1:1.0.9-1) ... Selecting previously unselected package libmd0:armhf. Preparing to unpack .../62-libmd0_1.0.3-3_armhf.deb ... Unpacking libmd0:armhf (1.0.3-3) ... Selecting previously unselected package libbsd0:armhf. Preparing to unpack .../63-libbsd0_0.11.3-1_armhf.deb ... Unpacking libbsd0:armhf (0.11.3-1) ... Selecting previously unselected package libxdmcp6:armhf. Preparing to unpack .../64-libxdmcp6_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp6:armhf (1:1.1.2-3) ... Selecting previously unselected package libxcb1:armhf. Preparing to unpack .../65-libxcb1_1.14-3_armhf.deb ... Unpacking libxcb1:armhf (1.14-3) ... Selecting previously unselected package libx11-data. Preparing to unpack .../66-libx11-data_2%3a1.7.2-1_all.deb ... Unpacking libx11-data (2:1.7.2-1) ... Selecting previously unselected package libx11-6:armhf. Preparing to unpack .../67-libx11-6_2%3a1.7.2-1_armhf.deb ... Unpacking libx11-6:armhf (2:1.7.2-1) ... Selecting previously unselected package libxpm4:armhf. Preparing to unpack .../68-libxpm4_1%3a3.5.12-1_armhf.deb ... Unpacking libxpm4:armhf (1:3.5.12-1) ... Selecting previously unselected package libgd3:armhf. Preparing to unpack .../69-libgd3_2.3.0-2_armhf.deb ... Unpacking libgd3:armhf (2.3.0-2) ... Selecting previously unselected package libansilove1:armhf. Preparing to unpack .../70-libansilove1_1.2.8-1_armhf.deb ... Unpacking libansilove1:armhf (1.2.8-1) ... Selecting previously unselected package libansilove-dev:armhf. Preparing to unpack .../71-libansilove-dev_1.2.8-1_armhf.deb ... Unpacking libansilove-dev:armhf (1.2.8-1) ... Selecting previously unselected package libmd-dev:armhf. Preparing to unpack .../72-libmd-dev_1.0.3-3_armhf.deb ... Unpacking libmd-dev:armhf (1.0.3-3) ... Selecting previously unselected package libbsd-dev:armhf. Preparing to unpack .../73-libbsd-dev_0.11.3-1_armhf.deb ... Unpacking libbsd-dev:armhf (0.11.3-1) ... Setting up libexpat1:armhf (2.2.10-2) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up libxau6:armhf (1:1.0.9-1) ... Setting up libpsl5:armhf (0.21.0-1.2) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libbrotli1:armhf (1.0.9-2+b2) ... Setting up libnghttp2-14:armhf (1.43.0-1) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up libdeflate0:armhf (1.7-1) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up libjbig0:armhf (2.1-3.1+b2) ... Setting up libsasl2-modules-db:armhf (2.1.27+dfsg-2.1) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libuv1:armhf (1.40.0-2) ... Setting up libjpeg62-turbo:armhf (1:2.0.6-4) ... Setting up libx11-data (2:1.7.2-1) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b2) ... Setting up libncurses6:armhf (6.2+20201114-2) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up libpng16-16:armhf (1.6.37-3) ... Setting up autopoint (0.21-4) ... Setting up libwebp6:armhf (0.6.1-2.1) ... Setting up fonts-dejavu-core (2.37-2) ... Setting up libsasl2-2:armhf (2.1.27+dfsg-2.1) ... Setting up libjsoncpp24:armhf (1.9.4-4) ... Setting up libmd0:armhf (1.0.3-3) ... Setting up sensible-utils (0.0.14) ... Setting up librhash0:armhf (1.4.1-2) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libmd-dev:armhf (1.0.3-3) ... Setting up libsub-override-perl (0.09-2) ... Setting up libssh2-1:armhf (1.9.0-2) ... Setting up cmake-data (3.18.4-2) ... Setting up libtiff5:armhf (4.2.0-1) ... Setting up libbsd0:armhf (0.11.3-1) ... Setting up libelf1:armhf (0.183-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libbsd-dev:armhf (0.11.3-1) ... Setting up libprocps8:armhf (2:3.3.17-5) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up libxdmcp6:armhf (1:1.1.2-3) ... Setting up libxcb1:armhf (1.14-3) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libarchive13:armhf (3.4.3-2+b1) ... Setting up libldap-2.4-2:armhf (2.4.57+dfsg-3) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libfreetype6:armhf (2.10.4+dfsg-1) ... Setting up ucf (3.0043) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up procps (2:3.3.17-5) ... Setting up libcurl4:armhf (7.74.0-1.3+b1) ... Setting up libx11-6:armhf (2:1.7.2-1) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libxpm4:armhf (1:3.5.12-1) ... Setting up fontconfig-config (2.13.1-4.2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up cmake (3.18.4-2) ... Setting up libfontconfig1:armhf (2.13.1-4.2) ... Setting up debhelper (13.3.4) ... Setting up libgd3:armhf (2.3.0-2) ... Setting up libansilove1:armhf (1.2.8-1) ... Setting up libansilove-dev:armhf (1.2.8-1) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/ansilove-4.1.4/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../ansilove_4.1.4-1_source.changes dpkg-buildpackage: info: source package ansilove dpkg-buildpackage: info: source version 4.1.4-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Gürkan Myczko dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure cd obj-arm-linux-gnueabihf && cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run -DCMAKE_SKIP_INSTALL_ALL_DEPENDENCY=ON "-GUnix Makefiles" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_LIBDIR=lib/arm-linux-gnueabihf .. -- The C compiler identification is GNU 10.2.1 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Looking for pledge -- Looking for pledge - not found -- Looking for strtonum -- Looking for strtonum - not found -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_EXPORT_NO_PACKAGE_REGISTRY CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY -- Build files have been written to: /build/ansilove-4.1.4/obj-arm-linux-gnueabihf dh_auto_build cd obj-arm-linux-gnueabihf && make -j5 "INSTALL=install --strip-program=true" VERBOSE=1 make[1]: Entering directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' /usr/bin/cmake -S/build/ansilove-4.1.4 -B/build/ansilove-4.1.4/obj-arm-linux-gnueabihf --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /build/ansilove-4.1.4/obj-arm-linux-gnueabihf/CMakeFiles /build/ansilove-4.1.4/obj-arm-linux-gnueabihf//CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[2]: Entering directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' make -f CMakeFiles/ansilove.dir/build.make CMakeFiles/ansilove.dir/depend make[3]: Entering directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' cd /build/ansilove-4.1.4/obj-arm-linux-gnueabihf && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /build/ansilove-4.1.4 /build/ansilove-4.1.4 /build/ansilove-4.1.4/obj-arm-linux-gnueabihf /build/ansilove-4.1.4/obj-arm-linux-gnueabihf /build/ansilove-4.1.4/obj-arm-linux-gnueabihf/CMakeFiles/ansilove.dir/DependInfo.cmake --color= Dependee "/build/ansilove-4.1.4/obj-arm-linux-gnueabihf/CMakeFiles/ansilove.dir/DependInfo.cmake" is newer than depender "/build/ansilove-4.1.4/obj-arm-linux-gnueabihf/CMakeFiles/ansilove.dir/depend.internal". Dependee "/build/ansilove-4.1.4/obj-arm-linux-gnueabihf/CMakeFiles/CMakeDirectoryInformation.cmake" is newer than depender "/build/ansilove-4.1.4/obj-arm-linux-gnueabihf/CMakeFiles/ansilove.dir/depend.internal". Scanning dependencies of target ansilove make[3]: Leaving directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' make -f CMakeFiles/ansilove.dir/build.make CMakeFiles/ansilove.dir/build make[3]: Entering directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' [ 14%] Building C object CMakeFiles/ansilove.dir/src/ansilove.c.o /usr/bin/cc -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -I/build/ansilove-4.1.4/compat -g -O2 -fdebug-prefix-map=/build/ansilove-4.1.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -Wextra -std=c99 -pedantic -o CMakeFiles/ansilove.dir/src/ansilove.c.o -c /build/ansilove-4.1.4/src/ansilove.c [ 57%] Building C object CMakeFiles/ansilove.dir/src/strtolower.c.o [ 42%] Building C object CMakeFiles/ansilove.dir/src/sauce.c.o [ 42%] Building C object CMakeFiles/ansilove.dir/src/types.c.o /usr/bin/cc -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -I/build/ansilove-4.1.4/compat -g -O2 -fdebug-prefix-map=/build/ansilove-4.1.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -Wextra -std=c99 -pedantic -o CMakeFiles/ansilove.dir/src/types.c.o -c /build/ansilove-4.1.4/src/types.c /usr/bin/cc -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -I/build/ansilove-4.1.4/compat -g -O2 -fdebug-prefix-map=/build/ansilove-4.1.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -Wextra -std=c99 -pedantic -o CMakeFiles/ansilove.dir/src/strtolower.c.o -c /build/ansilove-4.1.4/src/strtolower.c [ 71%] Building C object CMakeFiles/ansilove.dir/compat/pledge.c.o /usr/bin/cc -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -I/build/ansilove-4.1.4/compat -g -O2 -fdebug-prefix-map=/build/ansilove-4.1.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -Wextra -std=c99 -pedantic -o CMakeFiles/ansilove.dir/src/sauce.c.o -c /build/ansilove-4.1.4/src/sauce.c /usr/bin/cc -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -I/build/ansilove-4.1.4/compat -g -O2 -fdebug-prefix-map=/build/ansilove-4.1.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -Wextra -std=c99 -pedantic -o CMakeFiles/ansilove.dir/compat/pledge.c.o -c /build/ansilove-4.1.4/compat/pledge.c [ 85%] Building C object CMakeFiles/ansilove.dir/compat/strtonum.c.o /usr/bin/cc -D_FORTIFY_SOURCE=2 -D_GNU_SOURCE -I/build/ansilove-4.1.4/compat -g -O2 -fdebug-prefix-map=/build/ansilove-4.1.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -Wextra -std=c99 -pedantic -o CMakeFiles/ansilove.dir/compat/strtonum.c.o -c /build/ansilove-4.1.4/compat/strtonum.c [100%] Linking C executable ansilove /usr/bin/cmake -E cmake_link_script CMakeFiles/ansilove.dir/link.txt --verbose=1 /usr/bin/cc -g -O2 -fdebug-prefix-map=/build/ansilove-4.1.4=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wl,-z,relro -Wl,-z,now -W -rdynamic CMakeFiles/ansilove.dir/src/ansilove.c.o CMakeFiles/ansilove.dir/src/types.c.o CMakeFiles/ansilove.dir/src/strtolower.c.o CMakeFiles/ansilove.dir/src/sauce.c.o CMakeFiles/ansilove.dir/compat/pledge.c.o CMakeFiles/ansilove.dir/compat/strtonum.c.o -o ansilove -lansilove -lm make[3]: Leaving directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' [100%] Built target ansilove make[2]: Leaving directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' /usr/bin/cmake -E cmake_progress_start /build/ansilove-4.1.4/obj-arm-linux-gnueabihf/CMakeFiles 0 make[1]: Leaving directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' dh_auto_test cd obj-arm-linux-gnueabihf && make -j5 test ARGS\+=-j5 make[1]: Entering directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' Running tests... /usr/bin/ctest --force-new-ctest-process -j5 Test project /build/ansilove-4.1.4/obj-arm-linux-gnueabihf Start 1: ansilove Start 2: ansi Start 3: artworx Start 4: bin Start 5: pcboard 1/7 Test #1: ansilove ......................... Passed 0.03 sec Start 6: tundra 2/7 Test #2: ansi ............................. Passed 0.10 sec Start 7: xbin 3/7 Test #4: bin .............................. Passed 0.10 sec 4/7 Test #5: pcboard .......................... Passed 0.12 sec 5/7 Test #3: artworx .......................... Passed 0.15 sec 6/7 Test #7: xbin ............................. Passed 0.12 sec 7/7 Test #6: tundra ........................... Passed 0.33 sec 100% tests passed, 0 tests failed out of 7 Total Test time (real) = 0.37 sec make[1]: Leaving directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install cd obj-arm-linux-gnueabihf && make -j5 install DESTDIR=/build/ansilove-4.1.4/debian/ansilove AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' /usr/bin/cmake -S/build/ansilove-4.1.4 -B/build/ansilove-4.1.4/obj-arm-linux-gnueabihf --check-build-system CMakeFiles/Makefile.cmake 0 make -f CMakeFiles/Makefile2 preinstall make[2]: Entering directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' make[2]: Nothing to be done for 'preinstall'. make[2]: Leaving directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' Install the project... /usr/bin/cmake -P cmake_install.cmake -- Install configuration: "Release" -- Installing: /build/ansilove-4.1.4/debian/ansilove/usr/bin/ansilove -- Installing: /build/ansilove-4.1.4/debian/ansilove/usr/share/man/man1/ansilove.1 make[1]: Leaving directory '/build/ansilove-4.1.4/obj-arm-linux-gnueabihf' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism debian/rules override_dh_compress make[1]: Entering directory '/build/ansilove-4.1.4' dh_compress -X.ans make[1]: Leaving directory '/build/ansilove-4.1.4' dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'ansilove' in '../ansilove_4.1.4-1_armhf.deb'. dpkg-deb: building package 'ansilove-dbgsym' in '../ansilove-dbgsym_4.1.4-1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../ansilove_4.1.4-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/19904 and its subdirectories I: Current time: Mon Sep 6 16:41:20 -12 2021 I: pbuilder-time-stamp: 1630989680 Tue Sep 7 04:41:27 UTC 2021 I: 1st build successful. Starting 2nd build on remote node virt32b-armhf-rb.debian.net. Tue Sep 7 04:41:27 UTC 2021 I: Preparing to do remote build '2' on virt32b-armhf-rb.debian.net. Tue Sep 7 04:44:24 UTC 2021 I: Deleting $TMPDIR on virt32b-armhf-rb.debian.net. Tue Sep 7 04:44:26 UTC 2021 I: ansilove_4.1.4-1_armhf.changes: Format: 1.8 Date: Tue, 24 Nov 2020 06:16:48 +0100 Source: ansilove Binary: ansilove ansilove-dbgsym Architecture: armhf Version: 4.1.4-1 Distribution: unstable Urgency: medium Maintainer: Gürkan Myczko Changed-By: Gürkan Myczko Description: ansilove - ANSI and ASCII art to PNG converter Changes: ansilove (4.1.4-1) unstable; urgency=medium . * New upstream version. * d/copyright: updated years, set Upstream-Contact. * Bump debhelper version to 13, drop d/compat. * d/upstream/metadata: added. * d/control: added Rules-Requires-Root. Checksums-Sha1: d6ffc9e3bce0e6ad54131abffd976626d9ac31bf 15568 ansilove-dbgsym_4.1.4-1_armhf.deb a3be026f97c2653736c6cdae66839478a4ee9e9d 6132 ansilove_4.1.4-1_armhf.buildinfo a65f32275b2b188f2524dd2193f4271b36cad99a 28632 ansilove_4.1.4-1_armhf.deb Checksums-Sha256: 442e9c794ef9507bc8ea48d1c570773b6e86805856c91d5947adffc4d9edce9c 15568 ansilove-dbgsym_4.1.4-1_armhf.deb 9b04d805b81c6bae19eef7855a80aad43dffc51fa0044eca1a6caa340d93b884 6132 ansilove_4.1.4-1_armhf.buildinfo 1bb9f373731f080b5e89f7e0da14dcbf17824a968dcfd562fe34a71fbb7a89eb 28632 ansilove_4.1.4-1_armhf.deb Files: f36026ac894584aa442d44bca1040557 15568 debug optional ansilove-dbgsym_4.1.4-1_armhf.deb bfa72b6feaf2cafe924c67926b7aaaa5 6132 graphics optional ansilove_4.1.4-1_armhf.buildinfo 1c2d4611a125115186b3aeaa6b572fdb 28632 graphics optional ansilove_4.1.4-1_armhf.deb Tue Sep 7 04:44:46 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.uNSRXXdDRq/ansilove_4.1.4-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.uNSRXXdDRq/ansilove_4.1.4-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.uNSRXXdDRq/ansilove_4.1.4-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.uNSRXXdDRq/b1/ansilove_4.1.4-1_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.uNSRXXdDRq/b2/ansilove_4.1.4-1_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.332s) 0.332s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.024s) 0.024s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Tue Sep 7 04:45:29 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Tue Sep 7 04:45:29 UTC 2021 I: ansilove from bullseye built successfully and reproducibly on armhf. Tue Sep 7 04:45:30 UTC 2021 I: Submitting .buildinfo files to external archives: Tue Sep 7 04:45:30 UTC 2021 I: Submitting 8.0K b1/ansilove_4.1.4-1_armhf.buildinfo.asc Tue Sep 7 04:45:31 UTC 2021 I: Submitting 8.0K b2/ansilove_4.1.4-1_armhf.buildinfo.asc Tue Sep 7 04:45:32 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue Sep 7 04:45:32 UTC 2021 I: Done submitting .buildinfo files. Tue Sep 7 04:45:32 UTC 2021 I: Removing signed ansilove_4.1.4-1_armhf.buildinfo.asc files: removed './b1/ansilove_4.1.4-1_armhf.buildinfo.asc' removed './b2/ansilove_4.1.4-1_armhf.buildinfo.asc'